Pelco Security Camera PANASONIC WV NP244 User Manual

Release Notes  
Panasonic IP Cameras Supported on Digital Sentry  
Integral Digital Sentry® digital video management systems (DVMS) support certain  
Panasonic® IP camera models. The camera models listed in this document can be used  
with Digital Sentry IP camera driver version 6.8.0.126 and later. Refer to each camera’s  
table for information about the hardware and software features validated for use on a  
Digital Sentry system. Any general limitations or special instructions are listed at the  
beginning of the document, and any model-specific information is listed after each table.  
For information about the general usage of each camera, refer to the camera  
manufacturer’s documentation.  
To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer  
to the Pelco Web site at www.pelco.com.  
General Panasonic IP Camera Notes  
• If the frame rate is set to a value larger than the maximum value for a camera, the  
frame rate defaults to the maximum value.  
• Frame rates are rounded up to the next value listed in the tables. For example, if the  
requested frame rate is 8 frames per second (fps), the camera provides 10 fps.  
• Because of a limitation regarding the number of users viewing feeds from the  
camera, the frame rate requested might not match what the camera can supply at  
that time. The camera automatically logs off users who are not actively using the  
feeds, which then increases the total throughput for remaining users.  
• Frame rates could be reduced as quality settings are increased.  
• All camera-specific Panasonic drivers have been replaced by a single Panasonic i-Pro  
driver in DSAdmin.  
To capture images larger than 2 MP, you must install Integral IP camera driver 6.7.0.5  
or later and then Megapixel Support for DS Server/VAU 4.1. To obtain a copy of all  
necessary software versions, go to www.pelco.com.  
To view images larger than 2 MP, you must install Megapixel Support for DS Client/  
Admin 4.1 and DS ControlPoint 6.5.1.28 or later. To obtain a copy of all necessary  
software versions, go to www.pelco.com.  
C1009RN (9/08)  
Page 1 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Panasonic WV-NP1004  
Firmware  
1.21  
Supported Resolutions  
1280 x 960 at 15 fps  
960 x 720 at 24 fps  
640 x 480 at 30 fps  
320 x 240 at 30 fps  
FPS  
1–30  
10  
Number of Quality Settings  
Supported Codec  
MJPEG  
Supported Motion Detection Integral  
Pan/Tilt/Zoom (PTZ)  
Not available  
NOTE: When changing from partial- to full-scan mode using different resolutions,  
WV-NP10004 might not display video for up to 4 minutes.  
Panasonic WV-NS202 and WV-NS202A  
Firmware  
2.01 P1  
Supported Resolutions  
FPS  
640 x 480, 320 x 240  
1–30  
Number of Quality Settings  
MJPEG: 10  
MPEG-4: 3  
Supported Codec  
MJPEG, MPEG-4  
Supported Motion Detection Integral  
Pan/Tilt/Zoom (PTZ)  
64 presets  
NOTES:  
• Digital Sentry systems support a maximum of 10 PTZ presets for WV-NS202 and  
WV-NS202A cameras.  
• When changing the WV-NS202 or WV-NS202A configuration, the Digital Sentry  
VideoServer Service could restart, which will interrupt video recording for several  
minutes.  
C1009RN (9/08)  
Page 3 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Panasonic WV-NS324  
Firmware  
2.23E  
Supported Resolutions  
640 x 480, 640 x 240, 320 x 240,  
160 x 120  
FPS  
1–30  
4
Number of Quality Settings  
Supported Codec  
MJPEG  
Supported Motion Detection Integral  
Pan/Tilt/Zoom (PTZ)  
16 presets  
NOTES:  
• Digital Sentry systems support a maximum of 10 PTZ presets for WV-NS324 cameras.  
• Before changing the resolution on WV-NS324, close the Digital Sentry client software.  
The Digital Sentry system will not record video for up to 4 minutes.  
Panasonic WV-NS472  
Firmware  
2.21P  
Supported Resolutions  
640 x 480, 640 x 240, 320 x 240,  
160 x 120  
FPS  
1–30  
4
Number of Quality Settings  
Supported Codec  
MJPEG  
Supported Motion Detection Integral  
Pan/Tilt/Zoom (PTZ)  
Not available  
NOTE: Before changing the resolution on WV-NS472, close the Digital Sentry client  
software. Up to 4 minutes of video will be lost.  
Page 4 of 6  
C1009RN (9/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Panasonic WV-NS474S  
Firmware  
2.22E  
Supported Resolutions  
640 x 480, 640 x 240, 320 x 240,  
160 x 120  
FPS  
1–30  
4
Number of Quality Settings  
Supported Codec  
MJPEG  
Supported Motion Detection Integral  
Pan/Tilt/Zoom (PTZ)  
Yes (presets not available)  
NOTE: Before changing the resolution on WV-NS472, close the Digital Sentry client  
software. Up to 4 minutes of video will be lost.  
Panasonic WV-NS484  
Firmware  
1.01E1  
Supported Resolutions  
FPS  
640 x 480, 320 x 240  
1–30  
Number of Quality Settings  
MJPEG: 10  
MPEG-4: 3  
Supported Codec  
MJPEG, MPEG-4  
Supported Motion Detection Integral  
Pan/Tilt/Zoom (PTZ)  
Yes (presets not available)  
NOTE: When changing the WV-NS484 configuration, the Digital Sentry VideoServer  
Service could restart, which will interrupt video recording for several minutes.  
C1009RN (9/08)  
Page 5 of 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Panasonic WV-NS954  
Firmware  
1.06E0  
Supported Resolutions  
FPS  
640 x 480, 320 x 240  
1–30  
Number of Quality Settings  
Supported Codec  
10 MJPEG; 9 MPEG-4  
MJPEG: 10  
MPEG-4: 9  
Supported Motion Detection Integral, In-Camera  
Pan/Tilt/Zoom (PTZ)  
Yes (presets not available)  
NOTE: When using WV-NS954, select the Panasonic i-Pro driver in DSAdmin.  
Contact Information  
Pelco, Inc. Worldwide Headquarters  
3500 Pelco Way, Clovis, California 93612 USA  
USA & Canada: Tel: (800) 289-9100, Fax: (800) 289-9150  
International: Tel: +1(559) 292-1981, Fax: +1(559) 348-1120  
Document Revision History  
Document #  
Date  
Comments  
C1009RN  
9/08  
Original version.  
Pelco, the Pelco logo, and Digital Sentry are registered trademarks of Pelco, Inc.  
Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.  
© Copyright 2008, Pelco, Inc. All rights reserved.  
Page 6 of 6  
C1009RN (9/08)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Car Stereo System SWA3031W User Manual
Philips Flat Panel Television 13PT30L User Manual
Philips Projector PPX1430 User Manual
Pioneer Stereo Amplifier vsa e08 User Manual
Planar Car Video System PX2710MW User Manual
Polycom Network Router 3726 17298 001 User Manual
Poulan Lawn Mower 177552 User Manual
Poulan Tiller 410237 User Manual
Poulan Trimmer 545177333 User Manual
PS Audio Stereo Amplifier PCA 2 User Manual