Pelco Microscope Magnifier DX9100 Series User Manual

9100 SERIES  
VIEWSTATION AND RECORDER  
Quick Start Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIEWSTATION  
POWER  
CONNECTION  
10/100/1000 BASE-T ETHERNET INTERFACE:  
ALLOWS MULTIPLE VIEWSTATIONS  
AND RECORDERS  
1
4
MAXIMUM 16  
CAMERA INPUTS  
(VIDEO IN)  
Term  
Loop  
75  
HI-Z  
n  
1
2
RECORDER  
1
4
9
12  
5
8
13  
16  
Ter
Loo
75  
Term  
Loop  
75  
Term  
Loop  
75  
Term  
Loop  
75  
HI-Z  
HI-Z  
HI-Z  
HI-Z  
Rel  
Alarm Inputs  
Rel  
Alarm Inputs  
In  
1
2
3
4
5
6
7
8
Out  
1
1
2
3
4
5
6
7
8
Com  
2
9
10  
11  
12  
13  
14  
15  
16 Com  
In  
9
10  
11  
12  
13  
14  
15  
16  
AUDIO INPUTS  
Out  
1
2
5
6
9
13  
14  
10  
FOR  
FUTURE  
3
4
7
8
11  
12  
15  
16  
POWER  
CONNECTION  
USE  
HASP KEY  
(INTO THE BOTTOM RIGHT USB PORT)  
Figure 2. System Connections  
C635M-QS (8/03)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING DATE/TIME PROPERTIES  
Follow these steps to set the Date/Time Properties on the recorder and the viewstation. Make sure you close all applications on  
the recorder and viewstation.  
Double-click the time on the system tray.  
The following page appears.  
Figure 3. Date and Time Page  
Set the date and time and then click Apply.  
Click Time Zone. The following page appears.  
Figure 4. Time Zone Page  
Select your time zone from the drop-down box. The default is (GMT -08:00) Pacific Time (US & Canada); Tijuana.  
NOTE: You must restart the system if you change the default time zone setting on the recorder or viewstation.  
Make sure that the Automatically adjust clock for daylight saving changescheckbox is selected, if applicable for the  
location of installation.  
Click Apply and then OK.  
4
C635M-QS (8/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVER CONFIGURATION UTILITY  
To open this application, double-click the DX9000 Server Configuration Utility icon on your recorders desktop.  
Set the frame rate and resolution. The number of channels is set automatically.  
Select the recording format. The default is NTSC.  
Click Server Identification to change the computer name (default is Pelco1) and IP address (default is 100.0.0.101).  
NOTE: Each recorder must have a unique recorder name and IP address.  
Enter the multicast group number. The last three numbers must match the last three numbers of the IP address. The default  
is 239.0.0.101.  
Click Configure.  
Restart the recorder.  
Figure 5. Server Configuration Utility  
C635M-QS (8/03)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLIENT CONFIGURATION UTILITY  
You can find this application on the viewstation. With this application you can build a list of local servers and export them to the  
recorders.  
Make sure that the recorder and viewstation are connected to the network switch.  
Go to Start > Programs > DX9000 Viewstation > Client Configuration Utility.  
Log in. The default user name and password is admin/admin. The following page appears.  
Figure 6. Client Configuration Utility Page  
Select Build a list of local servers.”  
Select Custom naming.”  
NOTE: The Standard naming option is used if all recorders have the same name and the only difference is the numbers. For  
example, Pelco1, Pelco2, Pelco3.  
Enter a recorder name and then click Add.  
Click Configure.  
NOTE: Repeat steps 6 and 7 for each recorder.  
Select Export to serverand then the name of the first recorder from the drop-down box.  
Click Configure.  
NOTE: Repeat steps 8 and 9 for each recorder that is in the drop-down box.  
6
C635M-QS (8/03)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIME SYNCHRONIZATION  
Go back to the Server Configuration Utility on the recorder to complete time synchronization.  
Click Suggest to see a list of the recorders that were exported in the Client Configuration Utility.  
Click Configure.  
NOTE: Repeat steps 1 and 2 on each physical recorder.  
Restart all recorders and viewstations.  
Figure 7. Define Time Synchronization  
Refer to the DX9100 Digital Video Recorder & Viewstation Installation manual for further programming instructions and to the  
DX9100 Viewstation Operation manual for instructions on viewing video.  
C635M-QS (8/03)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
World Headquarters  
3500 Pelco Way  
Clovis, California 93612 USA  
USA & Canada  
Tel: 800/289-9100  
Fax: 800/289-9150  
International  
Tel: 1-559/292-1981  
Fax: 1-559/348-1120  
ISO9001  
Orangeburg, New York | Las Vegas, Nevada | Eindhoven, The Netherlands | Wokingham, United Kingdom | Montreal, Canada | Singapore  
® Pelco and the Pelco logo are registered trademarks of Pelco.  
C635M-QS (8/03)  
© Copyright 2003, Pelco. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Car Video System C2927M User Manual
Peripheral Electronics Car Stereo System Aux2Car User Manual
Philips Bottle Warmer SCF660 User Manual
Philips Car Video System JENHR1D User Manual
Philips Cell Phone SE565 User Manual
Philips Electric Shaver TT2020 User Manual
Philips MP3 Player Accessories WAS6050 User Manual
Planar Car Video System IX2850 User Manual
Plantronics Headphones CS 70 User Manual
Polar Automobile Parts Y6 User Manual