Pelco Home Security System C1435M A User Manual

®
EH3508 Series  
Environmental Enclosure  
Installation/Operation Manual  
C1435M-A (11/96)  
Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • (559) 292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION/OPERATION MANUAL  
MODEL EH3508 SERIES  
ENVIRONMENTAL CAMERA ENCLOSURE  
1.0 WARNINGS  
Priortoinstallationanduseofthisproduct,thefollowing  
WARNINGS should be observed.  
4. After replacement/repair of this unit’s electrical  
components, conduct a resistance measurement  
betweenlineandexposedpartstoverifytheexposed  
parts have not been connected to line circuitry.  
1. Installation and servicing should only be done by  
Qualified Service Personnel and conform to all  
Local codes.  
5. The installation method and materials should be  
capable of supporting four (4) times the weight of  
theenclosure,pan/tilt,cameraandlenscombination.  
2. Unless the unit is specifically marked as a NEMA  
Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is  
designed for indoor use only and it must not be  
installed where exposed to rain and moisture.  
3. OnlyusereplacementpartsrecommendedbyPelco.  
The product may bear the following marks:  
This symbol indicates that dangerous voltage  
constituting a risk of electric shock is present  
within this unit.  
This symbol indicates that there are important  
operating and maintenance instructions in the  
literature accompanying this unit.  
CAUTION:  
RISK OF ELECTRIC SHOCK.  
DO NOT OPEN.  
CAUTION:  
TOREDUCETHERISKOFELECTRICAL  
SHOCK, DO NOT REMOVE COVER. NO  
USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
Please thoroughly familiarize yourself with the information in this manual  
prior to installation and operation.  
Pelco Manual C1435M-A (11/96)  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2 OPTIONS  
2.0 SCOPE  
AFW3512  
HK3512-1  
Anti-fogging window  
The information contained within this manual covers  
the EH3508 Series camera enclosures.  
Heater kit, thermostatically controlled,  
120 VAC, 40 watts. Activates ON at  
50°F (10°C); OFF at 80°F (26.67°C)  
3.0 DESCRIPTION  
The EH3508 Series are indoor/outdoor light-duty cam-  
eraenclosuresdesignedforusewithvariouscamerason  
the market and will accommodate fixed focal length  
lenses or motorized zoom lenses, with or without auto-  
iris operation.  
HK3512-2  
HK3512-3  
WD35-1  
Same as HK3512-1 except 24 VAC  
Same as HK3512-1 except 230 VAC  
Window defroster kit, continuous duty,  
3 watts, 120 VAC  
The lid of the enclosure is hinged in the front providing  
easy access during installation and when camera/lens  
adjustments are necessary. The camera sled itself (see  
Figure 3, Item 7) can serve as an elevation block. It can  
be removed, inverted and flipped, then reinstalled. All  
wiringandcablingisbroughtintotheenclosurethrough  
adjustable glands at the bottom rear of the enclosure.  
WD35-2  
WD35-3  
SS3508  
Same as WD35-1 except 24 VAC  
Same as WD35-1 except 230 VAC  
Sun shroud for EH3508 Series only  
3.3 RECOMMENDED MOUNTS  
The rear link-lock latch can be used with a padlock of  
suitable size for applications requiring additional secu-  
rity.  
CM4400  
Light duty ceiling mount with cable  
feedthrough and manually adjustable  
tilt table. Supports up to 15 lbs (6.75  
kg).  
Options for this series include heater, defroster and sun  
shroud.  
EM4400  
Light duty wall mount with cable  
feedthrough and manually adjustable  
tilt table. Supports up to 15 lbs (6.75  
kg).  
3.1 MODELS  
EH3508  
Enclosure,indoor/outdoor,8.75"(22.22  
cm) length.  
EH3508-1  
EH3508-2  
EH3508-3  
Same as EH3508 except unit is supplied  
with 120 VAC heater and defroster.  
Same as EH3508 except unit is supplied  
with 24 VAC heater and defroster.  
Same as EH3508 except unit is supplied  
with 230 VAC heater and defroster.  
2
Pelco Manual C1435M-A (11/96)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.4 RECOMMENDED CABLE SIZE/DISTANCE  
CAUTION:  
When using a single power source for both the camera and accessories, the camera power  
consumption must be taken into consideration when determining the wire gauge. However,  
the following chart does not include camera power because of the many variations available.  
The following cable sizes are the minimum recommended for use with the combination of defroster and heater.  
Model  
Number  
Input  
Voltage  
Power  
Consumption  
Cable Size  
Cable Distance  
EH3508-1  
EH3508-2  
EH3508-3  
120 VAC  
at 60 Hz  
43 watts  
43 watts  
43 watts  
20 Awg  
18 Awg  
16 Awg  
14 Awg  
1,619 ft  
(493.4 m)  
(785.1 m)  
(1,246.3 m)  
(1,988.2 m)  
2,576 ft  
4,089 ft  
6,523 ft  
24 VAC  
at 60 HZ  
20 Awg  
18 Awg  
16 Awg  
14 Awg  
67 ft  
107 ft  
170 ft  
272 ft  
(20.4 m)  
(32.6 m)  
(51.8 m)  
(82.9 m)  
230 VAC  
at 50 HZ  
20 Awg  
18 Awg  
16 Awg  
14 Awg  
5,318 ft  
8,460 ft  
13,427 ft  
21,420 ft  
(1,620.9 m)  
(2,578.6 m)  
(4,092.6 m)  
(6,528.9 m)  
Pelco Manual C1435M-A (11/96)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.0 INSTALLATION  
If you are installing a camera with a low optical cen-  
ter line or a camera with a large diameter lens, mount  
the camera so that the narrow lip of the sled fits  
over the mounting screws. This elevates the sled.  
Thefollowinghardwareissuppliedtomounttheenclosure:  
Quantity  
2
Item  
1/4-20 x .500 hex soc head screws  
(part # ZH1/420X.500CS)  
1/4 flat washer  
(part # ZH260X562X65C)  
1/4 split lock washer  
(part # ZH1/4LWSSL)  
5. There are two threaded mounting holes on the bot-  
tom of the enclosure. Mount the enclosure to a pan/  
tilt assembly or fixed mount with the 1/4-20 screws  
and washers that are supplied with the enclosure.  
2
2
6. Install the sled and camera in the enclosure:  
The following hardware is supplied to mount the camera:  
a. If the camera’s lens is adjustable, extend the  
lens to its maximum length.  
Quantity  
2
Item  
1/4-20 x .375 pan head phillips  
(part # ZH1/420X.375SPP)  
b. Place the sled on the rail over the attaching screws.  
c. Slide the sled so that the screws fit into the  
narrow slots of the mounting holes.  
4.1 CAMERA/LENS INSTALLATION  
To install the camera/lens, perform the following steps:  
1. Unlatch lid and open.  
d. Tighten the screws just enough to hold the sled  
to the rail, but not too tight to keep the sled  
from moving.  
2. Refer to Figure 3 for the location of the camera sled  
(item 7). Remove the camera sled from the rail:  
e. Slide the camera sled forward until the lens  
almost touches the window.  
a. Loosen the screws.  
f. Tighten the screws to secure the camera sled  
to the rail.  
b. Slide the sled so that the screws are in the large  
part of the mounting holes.  
7. Pull the video and power cables through the  
glands or conduit and attach to the camera.  
Adjust the glands, if used, for a tight fit around  
the cables.  
c. Remove the sled.  
d. Remove the parts tied to the sled.  
Where applicable, connect the enclosure power  
wires to pins 1 and 2 (AC IN) at TB1 on the PC  
board. (Refer to Figure 1.)  
3. If you are going to wire the enclosure with cable,  
remove the wiring glands and nuts from the parts  
bag and install them in the bottom of the enclosure.  
If you are going to wire the enclosure with con-  
duit, do not install the glands.  
This power may also be used to power the  
camera if voltages are the same. The power  
may be “jumpered” from pins 1 and 2 (AC IN)  
or pins 4 and 5 (AC OUT) to the camera power  
input. (Refer to Figure 1.)  
4. Mount the camera to the sled with the 1/4-20  
Phillips-head screws that are provided in the parts  
bag. You can mount the camera to either side of  
the sled. Note that the edges of the sled are bent  
and that one lip is wide and the other is narrow.  
Attach a BNC connector to the coax and connect  
to the camera.  
Normally you should mount the camera so that the  
wide lip of the sled fits over the mounting screws.  
8. Adjust camera focus and iris, if necessary. Con-  
nect auto iris, if applicable.  
9. Close the lid and latch.  
4
Pelco Manual C1435M-A (11/96)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.0 CARE AND MAINTENANCE  
Regularly scheduled maintenance will help prolong the  
operationallifeandappearanceoftheequipment. Clean  
the window regularly with a mild non-abrasive deter-  
gent in water and with a soft cloth to help maintain  
picture clarity.  
Figure 1. Heater and Defroster Wiring Diagram  
Figure 2. Heater Kit Installation  
Pelco Manual C1435M-A (11/96)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.0 EXPLODED ASSEMBLY DIAGRAM  
Refer to Figure 2 for exploded assembly diagram.  
Figure 3. EH3508 Exploded Assembly Diagram  
6
Pelco Manual C1435M-A (11/96)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.0 MECHANICAL PARTS LIST  
The following parts list corresponds to the exploded assembly diagram in Figure 3.  
Item  
Quantity  
Description  
Lid attachment pin  
Clip  
Gland  
Body  
Gasket (inches)  
Latch  
Camera sled  
Lid  
Lid hinge bracket  
Window bracket  
Window assembly  
Gland nut  
Spring  
Part Number  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
1
2
2
1
27  
1
1
1
1
2
1
2
1
EH350010105  
ZH.125ECLIP  
EH470010007B  
37004001ASSY  
EH350010011  
EH550010010  
EH35064236COMP  
EH35084135COMP  
EH35004141COMP  
EH35004142COMP  
EH35001000ASSY  
EH470010008B  
EH350010107  
Associated Hardware  
A
B
C
D
E
F
G
H
2
6
2
4
2
4
4
4
Rivet  
ZHRVT1/8X3/8CE  
ZH6LWSIS  
Internal tooth washer, #6  
Screw, 6-32 x 3/8", pan head, Phillips  
Screw, 6-32 x 3/8", pan head, Phillips  
Screw, 4-40 x 3/8" pan head, Phillips  
Nylon washer  
ZH6-32X.375SPP  
ZH6-SFX.375SPP  
ZH4-40X.375SPP  
ZH131X361X62N  
ZH4-40NUTSH  
ZH4LWSIS  
Nut, 4-4  
Internal tooth lock washer, #4  
Pelco Manual C1435M-A (11/96)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.0 SPECIFICATIONS  
MECHANICAL  
Cable Entry Holes: Ø.875"(willaccept1/2"conduit  
fitting when compression gland  
is removed)  
Camera Mounting: Multiple holes on adjustable  
camera sled  
Latch:  
Rear link lock latch  
GENERAL  
Construction:  
Dimensions:  
Environment:  
Camera and Lens  
Size:  
Accommodatescameraandlens  
combinations (including BNC  
connector) up to:  
Extruded and die cast aluminum  
See Figure 4  
EH3508:  
2.87" W x 3.00" H x 6.80" L  
(7.28 cm x 7.62 cm x 17.27 cm)  
-10° to 120° F  
(-23.33° to 48.89° C)  
EH3508-1/  
EH3508-2/  
EH3508-3  
Unit Weight:  
EH3508  
2.87" W x 3.00" H x 5.00" L  
(7.28 cm x 7.62 cm x 12.70 cm)  
2.18 lbs (.99 kg) approximate  
2.51 lbs (1.14 kg) approximate  
3.0 lbs (1.34 kg) approximate  
3.5 lbs (1.58 kg) approximate  
EH3508-1/  
EH3508-2/  
EH3508-3  
Viewing Window:  
3/16" (4.76 mm) thick, optically  
clear, impact resistant Lexan™  
MR5 coated (U.L. 94HB rated).  
Shipping Weight:  
EH3508  
Window  
Viewing Area:  
2.25" H x 2.63" W  
(5.71 cm x 6.68 cm)  
EH3508-1/  
EH3508-2/  
EH3508-3  
Cable Entry:  
TwoPG13.5compressionglands  
on bottom rear (maximum cable  
diameter 0.47")  
Figure 4. EH3508 Dimension Drawing  
8
Pelco Manual C1435M-A (11/96)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.0 WARRANTY AND RETURN  
INFORMATION  
WARRANTY  
RETURNS  
Pelco will repair or replace, without charge, any merchandise proved  
defectiveinmaterialorworkmanshipforaperiodofoneyearafterthedate  
of shipment.  
In order to expedite parts returned to the factory for repair or credit, please  
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an  
authorization number (CA number if returned for credit, and RA number  
if returned for repair).  
Exceptions to this warranty are as noted below:  
All merchandise returned for credit may be subject to a 20% restocking  
and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the  
assigned CA or RA number and freight should be prepaid. Ship to the  
appropriate address below.  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and  
keyboard).  
Three years on Camclosure® and fixed camera models, except the  
CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2,  
and MC3651H-2X camera models, which have a five-year warranty.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto  
Rico, send goods to:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto  
Rico and are instructed to return goods to the USA, you may do one of the  
following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and  
DF5/DF8 Series fixed dome products.  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, includ-  
ing when used in continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding  
wiper blades).  
Eighteen months on DX Series digital video recorders, NVR300  
Series network video recorders, and EnduraSeries distributed  
network-based video products.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
One year (except video heads) on video cassette recorders (VCRs).  
Video heads will be covered for a period of six months.  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods  
to:  
Six months on all pan and tilts, scanners or preset lenses used in  
continuousmotionapplications(thatis,presetscan,tourandautoscan  
modes).  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
Pelco will warrant all replacement parts and repairs for 90 days from the  
date of Pelco shipment. All goods requiring warranty repair shall be sent  
freight prepaid to Pelco, Clovis, California. Repairs made necessary by  
reason of misuse, alteration, normal wear, or accident are not covered  
under this warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or  
loss resulting from the specific use or application made of the Products.  
Pelco’s liability for any claim, whether based on breach of contract,  
negligence, infringement of any rights of any party or product liability,  
relating to the Products shall not exceed the price paid by the Dealer to  
Pelco for such Products. In no event will Pelco be liable for any special,  
incidental or consequential damages (including loss of use, loss of profit  
and claims of third parties) however caused, whether by the negligence  
of Pelco or otherwise.  
The above warranty provides the Dealer with specific legal rights. The  
Dealer may also have additional rights, which are subject to variation from  
state to state.  
Ifawarrantyrepairisrequired,theDealermustcontactPelcoat(800) 289-  
9100 or (559) 292-1981 to obtain a Repair Authorization number (RA),  
and provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice  
number  
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall  
under the warranty conditions stated above, please include a written  
explanation with the product when returned.  
Method of return shipment shall be the same or equal to the method by  
which the item was received by Pelco.  
Pelco, the Pelco logo, Camclosure, Esprit,  
Genex, Legacy, and Spectra are registered  
trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
© Copyright 1996, Pelco. All rights reserved.  
Pelco Manual C1435M-A (11/96)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Pelco  
3500 Pelco Way, Clovis, CA 93612-5699 (559) 292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827  
International customers call 1-559-292-1981 or FAX 1-559-348-1120  
(Product specifications subject to change without notice.)  
C1435M-A  
10  
Pelco Manual C1435M-A (11/96)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peerless Industries TV Mount PF660 User Manual
Perle Systems Switch S 1000MM XXXXXX User Manual
Philips Electric Shaver 6940LC 33 User Manual
Philips Projector 47PFL5704D User Manual
Philips Stereo System 25PT5105 00 User Manual
Philips TV VCR Combo CCB130AT User Manual
Philips VCR 33DV2 User Manual
Polycom Cordless Telephone 72 1084 02 User Manual
Poulan Snow Blower PP414EPS30 User Manual
Power Acoustik Speaker STW 10 STW 12 User Manual