Pelco Cash Register C1095M User Manual

C1095M  
INSTALLATION MANUAL  
ICIDRD INTERFACE CABLE  
FOR INTER-CHECK P.O.S. SYSTEMS  
®
1.0 SCOPE  
6. Refer to Figure 1 or Figure 2 for the proper  
wiringconfigurationtoyourInter-Checkunit.  
This manual covers the interface for the ICIDRD  
interface cable for the Wayne Dresser Plus 1, Plus 2,  
and Plus 3 registers.  
7. Make sure all connections are tight.  
8. Check register and display for proper opera-  
tion.  
The following should be noted prior to installation:  
1. This PELCO P.O.S. interface utilizes the  
display port of the Wayne Dresser register.  
2.2 INTER-CHECK UNIT PROGRAMMING  
1. Enter the MAIN MENUby pressing [ENTER]  
WARNING:  
in the monitoring mode.  
This interface is not a printer  
connection. Plugging this interface  
into the printer port will damage  
the interface.  
2. Inter-Check 1000S users press [1] (CHAN-  
NEL SETUP).  
Inter-Check 2000D users press [1] or [2] de-  
pending on the channel you are using for data  
display.  
2.0 INSTALLATION  
3. Press [2] in the CHANNEL MENU (DATA  
FORMAT/COMMUNICATION PROTO-  
COL).  
2.1 LOCATING THE CASH REGISTER  
DISPLAY CONNECTION  
4. Press [ENTER] or the arrow keys on your  
keyboard/keypad until you reach RS232  
STANDARD PRINTER.  
1. LocatetheportlabeledDISPLAYattherearof  
the register.  
5. Press [ESC] to save this selection.  
2. If the display port is not labeled, follow the  
cable from the customer display back to the  
register. The connector you need to locate will  
be a 9-pin D-SUB variety.  
6. Program the Communication Setup values  
accordingtoTableI.ConsultyourInter-Check  
manual for pertinent programming informa-  
tion.  
3. After locating this connector, unplug from the  
cash register.  
7. Press [ESC] to return to monitoring mode and  
test for proper operation.  
4. Plug PELCO's display interface directly into  
the register display port.  
5. Plug the register display cable back into the  
PELCO interface.  
PELCO Manual C1095M — 4/94  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 2. Wiring Configuration for Two (2) Wayne Dresser Registers (Displays)  
PELCO Manual C1095M — 4/94  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.0 WARRANTY AND RETURN  
INFORMATION  
WARRANTY  
RETURNS  
Pelco will repair or replace, without charge, any merchandise proved  
defectiveinmaterialorworkmanshipforaperiodofoneyearafterthedate  
of shipment.  
In order to expedite parts returned to the factory for repair or credit, please  
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an  
authorization number (CA number if returned for credit, and RA number  
if returned for repair).  
Exceptions to this warranty are as noted below:  
All merchandise returned for credit may be subject to a 20% restocking  
and refurbishing charge.  
Goods returned for repair or credit should be clearly identified with the  
assigned CA or RA number and freight should be prepaid. Ship to the  
appropriate address below.  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and  
keyboard).  
Three years on Camclosure® and fixed camera models, except the  
CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2,  
and MC3651H-2X camera models, which have a five-year warranty.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto  
Rico, send goods to:  
Service Department  
Pelco  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and  
DF5/DF8 Series fixed dome products.  
3500 Pelco Way  
Clovis, CA 93612-5699  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto  
Rico and are instructed to return goods to the USA, you may do one of the  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, includ-  
ing when used in continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding  
wiper blades).  
following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Eighteen months on DX Series digital video recorders, NVR300  
Series network video recorders, and EnduraSeries distributed  
network-based video products.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
One year (except video heads) on video cassette recorders (VCRs).  
Video heads will be covered for a period of six months.  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods  
to:  
Six months on all pan and tilts, scanners or preset lenses used in  
continuousmotionapplications(thatis,presetscan,tourandautoscan  
modes).  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
Pelco will warrant all replacement parts and repairs for 90 days from the  
date of Pelco shipment. All goods requiring warranty repair shall be sent  
freight prepaid to Pelco, Clovis, California. Repairs made necessary by  
reason of misuse, alteration, normal wear, or accident are not covered  
under this warranty.  
Pelco assumes no risk and shall be subject to no liability for damages or  
loss resulting from the specific use or application made of the Products.  
Pelco’s liability for any claim, whether based on breach of contract,  
negligence, infringement of any rights of any party or product liability,  
relating to the Products shall not exceed the price paid by the Dealer to  
Pelco for such Products. In no event will Pelco be liable for any special,  
incidental or consequential damages (including loss of use, loss of profit  
and claims of third parties) however caused, whether by the negligence  
of Pelco or otherwise.  
The above warranty provides the Dealer with specific legal rights. The  
Dealer may also have additional rights, which are subject to variation from  
state to state.  
Ifawarrantyrepairisrequired,theDealermustcontactPelcoat(800) 289-  
9100 or (559) 292-1981 to obtain a Repair Authorization number (RA),  
and provide the following information:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice  
number  
3. Details of the defect or problem  
If there is a dispute regarding the warranty of a product which does not fall  
under the warranty conditions stated above, please include a written  
explanation with the product when returned.  
Method of return shipment shall be the same or equal to the method by  
which the item was received by Pelco.  
PELCO  
3500 Pelco Way, Clovis, CA 93612-5699  
(559) 292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827  
Pelco, the Pelco logo, Camclosure, Esprit,  
Genex, Legacy, and Spectra are registered  
trademarks of Pelco.  
(Product specifications subject to change without  
notice.)  
Endura and ExSite are trademarks of Pelco.  
C1095M  
© Copyright 1994, Pelco. All rights reserved.  
4
PELCO Manual C1095M — 4/94  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco VCR TLR2168S User Manual
Pentair Swimming Pool Heater Pump User Manual
Philips Battery Charger LR6PS16C User Manual
Philips Car Stereo System SA4310 User Manual
Philips Clock 170P5 User Manual
Philips Flat Panel Television PW9556 User Manual
Philips TV DVD Combo 26MD350B User Manual
Polycom Server DOC2585A User Manual
Powermatic Saw 55 User Manual
Printronix Printer L5035 User Manual