Pelco Car Video System PMCL500 User Manual

I N S T A L L A T I O N / O P E R A T I O N

PMCL500 Series

FHD Narrow Bezel

LCD Monitor

42-, 46-, and 55-Inch Models

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Important Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

User-Supplied Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Indicator Lights, Controls, and Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front Pane l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

On-Screen Display (OSD) Keypad Function List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connection Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting Video Source Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting the Power Cor d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3

Connecting the Infrared (IR) Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting to Video Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting to Video Sources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting to a Compute r . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting the Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Turning Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Selecting Input Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Turning Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using the Menu Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

On-Screen Display (OSD) Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Image Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Real Time Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Video Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connection Types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Video Wall Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2 x 2 Video Wall Grid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3 x 3 Video Wall Grid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

OSD Menu for Video Wall Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

RS-232 Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

System Status Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

User Analog to Digital Converter (ADC) Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Resolution Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

List of Illustrations

Front Panel and Indicator Light s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0

Control Panel and OSD Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

OSD Keypad and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connection Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Remote Control Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Video (BNC Type) Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

VGA Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

DVI Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

10 Video Wall Display with Frame On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

11 Video Wall Display with Frame Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

12 2 x 2 Video Wall Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

13 3 x 3 Video Wall Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

14 RS-232 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

15 User ADC Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

C2988M (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

List of Tables

Light Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Real Time Clock Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2 x 2 Video Wall Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3 x 3 Video Wall Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Composite/Component/S-Video Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

DisplayPort/DVI/HDMI/VGA Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

C2988M (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Notices

REGULATORY NOTICES

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause

harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This

booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.

Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this

equipment under Federal Communications Commission’s rules.

In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation with non-approved

equipment or unshielded cables is likely to result in interference to radio and television reception.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

KOREAN CLASS B

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Instructions

This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the

product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following

safety instructions before operating the display. Keep these instructions in a safe place for future reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one blade wider than the

other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the points where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Only use with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

14. Unplug the apparatus during lightning storms or when unused for long periods of time.

15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.

16. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

17. Installation should be done only by qualified personnel and conform to all local codes.

18. Unless this unit is specifically marked as NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not

be installed where exposed to rain and moisture.

19. Only use installation methods and materials capable of supporting four times the maximum specified load.

20. Only use replacement parts recommended by Pelco.

21. Avoid touching the screen directly with your fingers as the oils from your skin may be difficult to remove from the LCD.

22. Do not apply direct pressure on the screen.

23. Keep the monitor in a dust-free environment and away from strong electromagnetic fields.

24. Do not use attachments, such as mounts, that are not recommended by Pelco. They may be hazardous.

25. Do not place the monitor on an unstable stand, bracket, or mount. The unit may fall, causing serious damage to the unit or injury to a

person. Only use mounts recommended by Pelco.

26. A CCC-approved power cord must be used to power this equipment when used in China.

27. A still image displayed too long may cause permanent damage to the LCD panel. Watching the LCD in 4:3 format for a long time may leave

traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Using a

camera or a system may cause a similar effect to the screen. Damages caused by this effect are not covered by the warranty.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present

within this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that there are important operating and maintenance instructions in

the literature accompanying this unit

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

Description

Pelco’s PMCL500 Series high-definition narrow bezel (NB) monitors deliver 1920 x 1080 resolution with high performance and the truest color

reproduction available. Multiple video streams can be arranged on a single monitor to reduce installation power requirements. These FHD

displays use low-power components to meet regulatory compliance while retaining compatibility with Pelco and third-party megapixel cameras.

When used with other lower resolution camera systems, Pelco FHD displays can seamlessly scale down to 720p, guaranteeing detailed images

from all cameras.

Standard monitor display parameters can be adjusted with on-screen menus and side panel controls.

MODELS

PMCL542NB

PMCL546NB

PMCL555NB

42-inch LCD monitor (1,067 mm)

46-inch LCD monitor (1,168 mm)

55-inch LCD monitor (1,397 mm)

RECOMMENDED MOUNTS

PMCLNBWMT

PMCLNBWMF

PMCLNBWMS

Tilt wall mount

Flat wall mount

Swingout arm wall mount

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

PACKAGE CONTENTS

Figure 1. Package Contents

42/46/55-inch FHD Monitor (1 ea.)

USA Standard Power Cord (1 ea.)

Infrared Extender (1 ea.)

Remote Control (1 ea.)

AAA Batteries (2 ea.)

European Standard Power Cord (1

ea.)

~í

DVI Cable (1 ea.)

Quick Start Guide (1 ea.)

Resource Disc (1 ea.)

VGA Cable with 15-pin D-Sub

Connection (1 ea.)

USER-SUPPLIED PARTS

Only one DVI cable and one VGA cable is supplied by Pelco. Additional video (RS-232/RS-485), VGA, or DVI cables are required to configure video

walls using multiple monitors. Refer to V i deo W a ll on page 19 to determine the needs for your particular installation.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

INDICATOR LIGHTS, CONTROLS, AND CONNECTIONS

FRONT PANEL

INDICATOR

LIGHTS

Figure 2. Front Panel and Indicator Lights

Table A. Light Indicators

Indicator

Green

Function

Normal operation

No signal

Blinking orange

Orange

Power saving mode

Power/AC off

Not lit

CONTROL PANEL

OSD

KEYPAD

Figure 3. Control Panel and OSD Keypad

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

ON-SCREEN DISPLAY (OSD) KEYPAD FUNCTION LIST

SOURCE

Key

Description

Power

Power Switch; power ON/OFF

Source selection; activate selection

Menu right/value increasing

Menu left/value decreasing

Menu up

Source

Menu down

Menu/Exit

OSD control menu button

MENU/EXIT

Figure 4. OSD Keypad and Functions

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTION PANEL

PMCL542NB

PMCL546NB/PMCL555NB

Figure 5. Connection Panel

Table B. Connection Panel

Name

Connector

ì Line out

Mini jack

î IR extender

ï PC audio in

ñ VGA (PC) input

ó DVI-D input

r HDMI input

s DisplayPort^™

Mini jack

15-pin, D-sub

24 pin, D-sub

(input only)

RCA W/R

Audio for S-Video/video input

u Video input/output

BNC

Y-Pb-Pr (Y-Cb-Cr) input

Audio for component input

RCA G/B/R

RCA W/R

—

~í

~â Main power switch

~ä

Power cord input

AC input

~ã S-Video input

~å RS-232C input

~ç DVI-D output

~é VGA (PC) output

4-pin, mini-DIN

9-pin, D-sub/RJ-485

24-pin, D-sub

15-pin, D-sub

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation

SETUP

NOTES:

•

Before connecting, turn off the monitor and any connected source equipment. After making all connections, turn on the monitor before

turning on other devices.

•

When connecting a computer, be sure that the computer is the last device turned on, after all connections are made.

Read the operation manuals of the video source equipment before making connections.

UNPACKING

The PMCL500 Series NB monitor is packed inside a box carton. Additional packing material has been placed within the carton to protect the

monitor during transport.

1. Before unpacking your monitor, prepare a stable, level, and clean surface near a wall outlet.

2. Set the monitor box in an upright position and pull out the white carton locks.

3. Lift up the top cover of the carton.

4. Remove the electrostatic discharge (ESD) bag before removing the display from the bottom tray carton.

CONNECTING VIDEO SOURCE EQUIPMENT

Video source equipment can be connected to any of the following interfaces:

•

High Definition Multimedia Interface (HDMI)

Component (Y, Pb, Pr)

S-Video

Composite (AV)

HD-15 for VGA

BNC

DVI

DisplayPort

CONNECTING THE POWER CORD

Connect the supplied power cord to the AC socket on the side of the monitor.

CONNECTING THE INFRARED (IR) EXTENDER

1. Connect the IR extender (supplied) to the IR extender jack.

2. Attach the extender to a bezel on the front of the monitor.

NOTE: The IR extender must be connected properly and affixed to one of the front bezels on the monitor for the remote control to operate effectively.

CONNECTING TO VIDEO EQUIPMENT

Use component (Y, Pb, Pr), S-Video, or composite (AV) cable when connecting to video equipment.

CONNECTING TO VIDEO SOURCES

It is recommended that you use HDMI cable when connecting to video sources that use HDMI output.

CONNECTING TO A COMPUTER

1. Connect the monitor to the computer using a high definition 15-pin VGA/DVI cable (supplied).

2. Secure the cable connectors by tightening the screws on both sides of the connector.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation

This section describes basic operating instructions for the PMCL500 Series NB monitors. Be sure that you have connected the required external

source equipment to the monitor before following these procedures.

GENERAL INFORMATION

The default language for the OSD is English. To change the OSD language, refer to the O n -Screen D i splay (O S D ) M e nus on page 16.

CONNECTING THE POWER CABLE

1. Connect the power cord to the power cord connector on the side of the monitor.

2. Connect the power cord to an AC power source.

3. Press the main power switch on the bottom of the monitor to the (|) position.

4. Press the power switch on the control panel or on the remote control to turn on (|) or turn off (○) power to the monitor.

TURNING POWER ON

Once the power switch is set to the on position (refer to C o nnecting the Power C a ble), press the power button located on the control panel or on

the remote control. It takes several seconds for the monitor to warm up after the power is turned on.

SELECTING INPUT SOURCE

To select the Input Source for the monitor, press the SOURCE button on the control panel or press the desired source key on the control panel or

on the remote control; pressing the AUTO key on the remote control will cycle to the next active source input.

TURNING POWER OFF

Press the power button located on the control panel or on the remote control.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

USING THE MENU SCREEN

The image and display settings can be adjusted through the menu as listed on the control panel or by using the remote control.

REMOTE CONTROL

INFO: Provides source and resolution information.

POWER: Turns the monitor on and off.

VGA: Selects the PC RGB source.

DVI: Selects the PC DVI source.

HDMI 1: Selects the HDMI source 1.

COMP: Selects the component source.

AV (VIDEO): Selects the composite video source.

HDMI 2: Selects the HDMI source 2.

P POSITION: Selects the PIP position.

DISPLAY PORT: Selects the DisplayPort source.

PIP: Turns the PIP feature on and off.

S-V: Selects the S-Video source.

INFO

VGA

DVI

HDMI1

HDMI2

COMP

P-POSITION DISPLAYPORT

S-V

PIP

SWAP

P-SOURCE

P-SOURCE: Selects the secondary subsource.

MENU: Displays the monitor’s on-screen menu system. When the menu

system is displayed, pressing this button will select the previous submenu.

S,W, X, T: Navigates through submenus and settings.

ENTER

EXIT

SCALING

FREEZE

MUTE

~í

EXIT: Closes the menu system.

BRIGHT CONTRAST

AUTO

SCALING: Toggles between different aspect ratios (Full Screen, Native, Letter

Box, and Pillar Box)

SOURCE VOLUME-

VOLUME+

FREEZE: Freezes the current source image.

MUTE: Turns off the sound.

BRIGHT: Adjusts the brightness.

CONTRAST: Adjusts the contrast.

AUTO: Adjusts the VGA source automatically.

SOURCE: Allows selection of the different sources.

VOLUME-: Decreases the sound.

Figure 6. Remote Control Functions

VOLUME+: Increases the sound.

~â

~ä

ENTER: Selects highlighted menu choices.

SWAP: Swaps the main source and subsource picture.

Locking and Unlocking the Remote Key and Keypad

Lock: Press Enter, Enter, Exit, Exit, Enter, and Exit on the controller by sequence and all keys (including remote and keypad) will be locked, except

Enter and Exit.

Unlock: Press Enter, Enter, Exit, Exit, Enter and Exit on the controller by sequence again and all keys will be unlocked.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

ON-SCREEN DISPLAY (OSD) MENUS

IMAGE SETTINGS

The following menus are used for making common image adjustments. To select the Image Settings menu options and ranges, press the right

^{and left arrows}◀ or ▶on the remote control or the control panel, and then press ENTER.

The following table lists the image settings, menu options/ranges, and the default settings.

Table C. Image Settings

Settings

Scheme

Menu Options/Ranges

Default

User

User, Vivid, Cinema, Game, and Sport

Brightness

Contrast

0 to 100

0 to 24

Sharpness

Saturation (Video Mode

only)

0 to 100

Hue (Video Mode only)

Backlight

0 to 100

Off or 2.2

2.2

Gamma

Color Temperature

Red Gain*

User, 5000ºK, 6500ºK, 7500ºK, and 9300ºK 9300ºK

128 to 384

–50 to 50

256

Green Gain*

Blue Gain*

256

Red Offset*

Green Offset*

Blue Offset*

0 (zero)

*The color temperature must be set to “User” to adjust this setting.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY SETTINGS

This menu is used for common source adjustments. To select the Display Settings menu options and ranges, press the right and left

^arrows◀ or ▶on the remote control or the control panel, and then press ENTER.

The following table lists the display settings, menu options/ranges, and the default settings.

Table D. Display Settings

MAIN

Settings

Menu Options/Ranges

Default

Aspect Ratio

Full screen, Pillar Box, Letter Box, and

Native

Full Screen

Zoom

0 to 10

On, Off

Auto Scan

Select Source

VGA

VGA, HDMI1, HDMI2, DVI, DisplayPort,

S-Video, Video, and Component

PIP

PIP Mode

Off, Large PIP, Medium PIP, Small PIP, and Off

Side-by-Side

PIP Position

Bottom-Right, Top-Left, Top-Right, and

Bottom-Left

Bottom-Right

Aspect Ratio

Full Screen, Pillar Box, and Letter Box

Full Screen

—

Side-by-Side Scale

Zoom In, Zoom Out, Main, PIP, Default,

and Return

Auto Scan

On, Off

Select Source

HDMI1, HDMI2, DVI, DisplayPort,

Component, S-Video, and Video

VGA for Main, Video for PIP

NOTES:

•

The maximum number of connecting devices for tiling mode is DVI = 9, VGA = 4, and Video = 4.

The maximum cable length between displays for tiling mode is 3 meters.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

AUDIO SETTINGS

This menu is used for adjusting volume settings. To select the Audio Settings menu options and ranges, press the right and left

^arrows◀ or ▶on the remote control or the control panel, and then press ENTER.

The following table lists the audio settings, menu options/ranges, and the default settings.

Table E. Audio Settings

Settings

Volume

Menu Options/Ranges

0 to 100

Default

Bass

0 to 20

Treble

0 to 20

Balance

0 to 20

HDMI Audio Input

HDMI, PC

HDMI

BASIC SETTINGS

This menu is used to make initial setup adjustments to the OSD menu and other on-screen messages. To select the Basic Settings menu options

^{and ranges, press the right and left arrows}◀ or ▶on the remote control or the control panel, and then press ENTER.

The following table lists the basic settings, menu options/ranges, and the default settings.

Table F. Basic Settings

Settings

Menu Options/Ranges

0 to 100

Default

OSD Transparent

OSD Location

OSD Zoom

Up, Down, Left, and Right

On, Off

—

Off

OSD Rotation

OSD Language

Landscape, Portrait

Landscape

English

English, Simplified Chinese, French, German,

Italian, Portuguese, Russian, and Spanish

OSD Timeout

Sleep Timer

Power LED

5 to 120

Off, 15, 30, 60, 90, and 120 minutes

On, Off

Off

—

Real Time Clock

(press X to display the Real Time Clock submenu)

REAL TIME CLOCK

This submenu is used to make adjustments to the monitor’s internal clock. To select the Real Time Clock submenu options and ranges, press the

^{right and left arrows}◀ or ▶on the remote control or the control panel, and then press ENTER.

The following table lists the Real Time Clock settings, submenu options/ranges, and the default settings in Year/Month/Date/Hour:Minutes

format.

Table G. Real Time Clock Settings

Settings

Menu Options/Ranges

(date and time)

Default

—

Real Time

Alarm Power On

Alarm Power Off

Disable, Enable

Disable

Disable, Enable

Refer to R e solution T a bles on page 26 for more information.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED SETTINGS

This menu is used to make advanced settings adjustments. To select the Advanced Settings menu options and ranges, press the right and left

^arrows◀ or ▶on the remote control or the control panel, and then press ENTER.

The following table lists the advanced settings, menu options/ranges, and the default settings for video wall configuration.

Table H. Advanced Settings

Settings

Menu Options/Ranges

No, Yes

Default

Auto Adjustment

Image Position

Phase

Up, Down, Left, and Right

0 to 63 (only VGA mode)

0 to 100 (only VGA mode)

Default, User

—

Clocks

—

VGA ADC Settings

Flesh Tone

IRFM

Default

Off, Low, Medium, and High (only video mode) Off

On, Off

Off

Baud Rate

Video Wall

Factory Reset

115200, 38400, 19200, and 9600

(press X to display the Video Wall submenu)

No, Yes

115200

—

VIDEO WALL

This submenu is used to make adjustments to the video wall display. To select the Video Wall submenu options and ranges, press the right and

left arrows W or X or the up and down arrows S or T on the remote control or control panel, and then press ENTER.

CONNECTION TYPES

Video walls can be configured in a 2 x 2 grid or a 3 x 3 grid, using the following three connection types.

Video (BNC type): Supports a maximum video wall grid of 2 x 2 monitors.

CAMERA

(1,1)

(1,2)

(2,1)

VIDEO

DVR

VIDEO

VIDEO VIDEO

IN OUT

(2,2)

Figure 7. Video (BNC Type) Connection

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

VGA: Supports a maximum video wall grid of 2 x 2 monitors.

(1,1)

(2,1)

VGA

VGA IN

DVI IN

VGA OUT DVI OUT

(1,2)

(2,2)

Figure 8. VGA Connection

DVI: Supports a maximum video wall grid of 3 x 3 monitors.

(1,1)

(2,1)

(2,2)

(2,3)

(3,1)

DVI

VGA IN

DVI IN

VGA OUT DVI OUT

(1,2)

(3,2)

DVI

(1,3)

(3,3)

DVI

Figure 9. DVI Connection

VIDEO WALL PARAMETERS

The following information describes the settings, and lists the submenu options/ranges and default settings for defining your video wall

parameters:

Monitor ID: Allows the user to set an individual monitor ID for each monitor. To control a monitor or multiple monitors that are daisy-chained by

RS-232, each monitor must have a unique monitor ID. Numbers 1 to 25 are available to be used as monitor IDs. It is recommended to number

each monitor in an RS-232 daisy chain sequentially starting with number 1.

NOTES:

•

DVI input can support up to a 3 x 3 grid and loop through directly.

VGA and video input can support up to a 2 x 2 grid and loop through directly.

Video Wall: Enables or disables the video wall. Select Yes to enable the video wall. The default setting is No, which disables the video wall

feature.

DVI Indemnity: Compensates manually for image degradation caused by daisy-chaining too many monitors using DVI cables. It is recommended

that you select the On option for the 7th, 8th, and 9th monitors in a DVI daisy-chain. For monitors 1 to 6, it is recommended that you select the

default Off option.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

Frame: Turns on or off the frame compensation.

Select Yes to turn on frame compensation. Part of the signal will be hidden by the monitors’ bezels.

Figure 10. Video Wall Display with Frame On

Select the default No setting to turn off frame compensation. The entire signal will be displayed.

Figure 11. Video Wall Display with Frame Off

Matrix X: The number of monitors arranged horizontally. Matrix X can range from 1 to 3 monitors by connecting with a DVI source, or 1 to 2

monitors by connecting with a VGA or video source.

Matrix Y: The number of monitors arranged vertically. Matrix Y can range from 1 to 3 monitors by connecting with a DVI source, or 1 to 2

monitors by connecting with a VGA or video source.

Division X: Selects the horizontal position in each row for a specific monitor.

Division Y: Selects the vertical position in each column for a specific monitor.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

2 X 2 VIDEO WALL GRID

Four monitors are used to construct a 2 x 2 video wall grid.

(1,1)

(2,1)

(1,2)

(2,2)

Figure 12. 2 x 2 Video Wall Grid

To configure a 2 x 2 video wall grid:

1. Determine the input signal type and connect the video signal (refer to C o nnection T y pes on page 19).

2. Connect an RS-232 cable (not supplied) to the first monitor (1,1) to enable the remote control function.

3. Connect the remaining three monitors using RS-485 cables (not supplied). Refer to R S -232 C o ntrol on page 24 for more information.

4. Set up the video wall parameters according to the following information.

Table I. 2 x 2 Video Wall Parameters

Monitor Position

1,1

2,1

2,2

1,2

Monitor ID

Video Wall

DVI Indemnity

Frame

Yes

Off

Yes

Off

Yes

Off

Yes

Off

Yes

Matrix X

Matrix Y

Division X

Division Y

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

3 X 3 VIDEO WALL GRID

Nine monitors are used to construct a 3 x 3 video wall grid.

(1,1)

(1,2)

(1,3)

(2,1)

(2,2)

(2,3)

(3,1)

(3,2)

(3,3)

Figure 13. 3 x 3 Video Wall Grid

To configure a 3 x 3 video wall grid:

1. Connect all monitors using DVI cables. Refer to C o nnection T y pes on page 19 for the monitor connection sequence.

NOTE: Only one DVI cable is supplied by Pelco. Additional user-supplied cables are required to configure video walls using multiple

monitors.

2. Set up the video wall parameters according to the following information:

Table J. 3 x 3 Video Wall Parameters

Monitor Position

1,1

2,1

3,1

3,2

2,2

1,2

1,3

2,3

3,3

Monitor ID

Video Wall

DVI Indemnity

Frame

Yes

Off

Yes

Off

Yes

Off

Yes

Off

Yes

Off

Yes

Off

Yes

Matrix X

Matrix Y

Division X

Division Y

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD MENU FOR VIDEO WALL SETUP

1. Press Menu on the remote control or control panel.

2. Press Up or Down to navigate to the Advanced Settings screen.

3. Press Right to enter the Advanced Settings menu.

4. Press Up or Down to navigate to the Video Wall submenu.

5. Press Right to access the Video Wall settings menu; the default setting is No.

6. Navigate to the Video Wall option, and press Right to change the Video Wall setting from No to Yes. The video wall menu displays.

7. Configure the video wall. Refer to V i deo W a ll Parameters on page 20 for more information.

8. Press Menu on the remote control or control panel to exit.

RS-232 CONTROL

Connect an RS-232 terminal or a personal computer to the video wall using an RS-232 cable (not supplied) from the controlling device to the first

monitor. Use three RS-485 cables (not supplied) to connect the remaining three monitors.

(1,1)

(2,1)

RS-232 IN

RS-485 OUT

RS-485 IN

RS-485 OUT

RS-232

RS-485 RS-485

OUT

RS-485 IN

RS-485 OUT

(1,2)

(2,2)

Figure 14. RS-232 Connection

NOTES:

•

To function correctly, any monitors using an RS-485 OUT connection can only be connected to another monitor of the same series model.

RS-232 connections only support 9-pin serial straight cables; crossover or null modem cables are not supported.

RS-485 connections only support Cat5 straight cables; crossover cables are not supported.

For more information on creating a video wall, contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or +1-559-292-1981

(international) for assistance. Be sure to have the serial number available when calling.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

SYSTEM STATUS MENU

This read-only menu provides information on the active sources and the latest firmware version.

USER ANALOG TO DIGITAL CONVERTER (ADC) CALIBRATION

When using VGA as the signal source, you must choose your user ADC calibration.

1. Go to Advanced Settings in the OSD menu.

2. Select VGA ADC Settings, and then choose ADC Calibration.

The “Ready to run ADC Calibration” message appears to verify that the image is displaying properly before ADC calibration begins.

NOTES:

•

The images in the green Region boxes (left and right) have to be white and black to run the calibration accurately. The black and white

images can be made using software such as Microsoft^®PowerPoint^®.

•

The white in the left Region box has to be the brightest white; the black in the right Region box has to be the darkest black.

Important Note:

1. The “Region 1” must be all white.

2. The “Region 2” must be all black.

REGION 1 (WHITE)

REGION 2 (BLACK)

Ready to run ADC Calibration?

Yes No

Figure 15. User ADC Calibration

3. After the proper image has been verified, click “Yes” to begin ADC calibration. The User ADC Calibration Wait message appears.

After the calibration is complete, a User ADC Calibration message will indicate if the process has successfully completed or failed.

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

RESOLUTION TABLES

Table K. Composite/Component/S-Video Mode

Mode

Resolution

720 x 480

Vertical Frequency (Hz)

SDTV 480i (NTSC)*

SDTV 576i (PAL)^†

EDTV 480p^‡

720 x 576

720 x 480

EDTV 576p^‡

720 x 576

HDTV 720p^‡

HDTV 1080i^‡

HDTV 1080p^‡

1280 x 720

1920 x 1080

50/60

*Supported 480i at 60 Hz (YPbPr)

^†Supported 576i at 50 Hz (YPbPr)

^‡Component only

Table L. DisplayPort/DVI/HDMI/VGA Mode

Mode

Resolution

640 x 480

Vertical Frequency (Hz)

VGA

60/72/75/85

SVGA

800 x 600

50/60/72/75/85

XGA

1024 x 768

1280 x 768

1280 x 800

1280 x 1024

1360 x 768

1400 x 1050

1440 x 900

1680 x 1050

1600 x 1200

720 x 480

60/70/75/85

WXGA

60/85

WXGA

SXGA

60/75/85

WXGA

SXGA+

WSXGA

WSXGA+

UXGA

EDTV 480P

EDTV 576P

HDTV 720P

HDTV 1080i

HDTV 1080p

720 x 576

1280 x 720

1920 x 1080

50/60/75

50/60

C2988M-A (6/11)

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

If the following instructions fail to solve your problem, contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or +1-559-292-1981

(international) for assistance. Be sure to have the serial number available when calling.

Do not try to repair the unit yourself. Opening it immediately voids the warranty. Leave maintenance and repairs to qualified technical personnel

only. Refer to the Product Warranty and Return Information located on the inside back page of this document.

WARNING: To reduce the risk of electrical shock, do not remove the cover or back of the monitor. There are no user-serviceable parts

inside.

Table M. Troubleshooting

Problem

Possible Cause

The power cord is not connected properly to the Ensure that the power cord is connected properly

power outlet. to the power outlet.