®
MLZA6DT
Motorized Zoom Lens Control
Installation/Operation Manual
C518M Rev B (4/91)
(800) 289-9100 or (1-559) 292-1981 • FAX (800) 289-9150 or (1-559) 292-3827
International customers call (1-559) 292-1981 or FAX (1-559) 348-1120
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION/OPERATION MANUAL
MODEL MLZA6DT
MOTORIZED ZOOM LENS CONTROL
1.0 WARNINGS
Priortoinstallationanduseofthisproduct,thefollowing
WARNINGS should be observed.
4. Only use replacement parts recommended by
Pelco.
1. Installation and servicing should only be done by
Qualified Service Personnel and conform to all Lo-
cal codes.
5. After replacement/repair of this unit’s electrical
components, conduct a resistance measurement
between line and exposed parts to verify the ex-
posed parts have not been connected to line cir-
cuitry.
2. Unless the unit is specifically marked as a NEMA
Type 3, 3R, 35, 4, 4X, 6 or 6P enclosure, it is de-
signed for Indoor use only and it must not be in-
stalled where exposed to rain and moisture.
3. The product may bear the following marks:
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TOREDUCETHERISKOFELECTRICAL
SHOCK, DO NOT REMOVE COVER. NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Please thoroughly familiarize yourself with the information in this manual
prior to installation and operation.
Pelco Manual C518M Rev B (4/91)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2.0 SCOPE
The information contained within this manual covers
the MLZA6DT Motorized Zoom Lens Control.
3.0 DESCRIPTION
The MLZA6DT is a desktop zoom lens control with
auto/manual iris control designed for use with all Pelco
motorized zoom lenses with “ND” or “MS” in the model
number. The servo amplifier contained within the con-
trol detects the slightest change in video level and drives
the iris motor to open or close the iris to maintain proper
faceplate illumination.
Front panel switches provide control of automatic/
manual iris operation, zoom and focus functions, with
optional manual control of the iris. Speed and video
level are adjustable through the front panel knob con-
trols.
3.1 OPTIONS
R300
Rack mount kit for up to three (3)
control modules
2
Pelco Manual C518M Rev B (4/91)
Download from Www.Somanuals.com. All Manuals Search And Download.
4.0 INSTALLATION
4. The contact pins supplied with the mating connec-
tor are the “crimp” type which may also be sol-
dered if you so desired (item 4).
4.1 CONNECTOR ASSEMBLY
Installation and/or testing will require you to assemble
the connector parts provided. Fabricate the intercon-
necting cable according to the following steps (refer-
ence Figure 1).
5. After crimping or soldering the contact pins to the
conductors, push them into the proper holes in the
connector until they snap in place.
NOTE: Contacts cannot be removed from the
connector without the use of the appropriate
AMP extraction tool which is available from
Pelco.
1. Slide partAof the cable clamp (item 1) over the end
of the cable (item 1, part C) with the threaded end
of the cable clamp facing the connector (item 5).
2. If the cable has a diameter less than 1/2 inch (1.3
cm), slide the rubber boot (item 2) over the end of
the cable and pull through the cable clamp to so
that the boot encases the cable and forms a good
seal.
6. Slide partA of the cable clamp toward the connec-
tor and screw the parts together.Attach part B (item
1) onto part A and connect both parts with the
screws provided.
7. Connect the cable assembly to the unit and seat
the connector by twisting the locking collar until it
snaps into position.
3. Strip back the cable jacket approximately 1-1/4
inches (3.2 cm) and separate the individual con-
ductors (item 3).
Refer to Figure 2 for wiring diagram.
5
1
threaded end of
cable clamp
A
B
C
STEP 1
FLEXIBLE RUBBER BOOT
5
1
A
B
STEP 2
C
2
5 **
3
1
4
A
B
STRIP 1/8"
C
STEPS 3-7
CRIMP
INSULATION
CRIMP
WIRE
OUTSIDE
JACKET
OF CABLE
STRIP 1"
4
1
2
1
1
**
3
8
9
5
ITEM 5 DETAIL
4
6
15
10
16
23
3
9
14
22
28
10
15
21
20
25
28
7
33
14
11
29
37
34
26
16
15
FRONT VIEW
FRONT VIEW
FRONT VIEW
37-PIN CONNECTOR
28-PIN CONNECTOR
16-PIN CONNECTOR
3
1
3
1
4
7
4
6
THE MOST COMMONLY USED
CONNECTOR PIN-OUT CONFIG-
URATIONS ARE SHOWN HERE.
REFERENCE THE CONNECTOR
DRAWING APPLICABLE TO
YOUR SITUATION.
11
8
9
7
14
12
FRONT VIEW
9-PIN CONNECTOR
FRONT VIEW
14-PIN CONNECTOR
Figure 1. Connector Assembly
Pelco Manual C518M Rev B (4/91)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1
3
1
2
5
4
6
3
12
14
1
IRIS
RED
BLK
10
13
12
LENS COM
ZOOM
4
2
WHT
YEL
8
GND
*
11
FOCUS
3
GRN
CONTROL
OUTPUT
(CONA14P)
P3
LENS INPUT
(CONA5M)
*GROUND WIRE IS SOLDERED TO
CONNECTOR HOUSING.
Figure 2. Wiring Diagram for Output Pin Assignments
4
Pelco Manual C518M Rev B (4/91)
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 R300 RACK MOUNT KIT
INSTALLATION
5. Insert the chassis into the rack body; sandwich the
rack body slotted tabs between the chassis and the
front plate, and the chassis and the rear plate.
The R300 Rack Mount Kit holds up to three control
modules. Blank filler panels are provided for less than
three modules.
6. Repeat steps 1-5 for other units or assembly of the
blank faceplate supplied.
To convert desk top units, perform the following steps
(refer to Figure 3):
7. Install the two straps sandwiching the slotted tabs
as in Step 4, keeping the bent ends outside the body.
1. Disconnect the equipment from its power supply.
2. Remove the feet from the bottom of the unit.
8. Attach the straps and rack body to the chassis with
two (2) cover screws, when applicable. If no chas-
sis is placed in either side port of the rack, a screw
and nut must be used to attach the strap and body
together.
3. Remove the four (4) screws retaining the cover and
remove the cover from the equipment.
9. Align the front and faceplates with each other and
tighten the four (4) screws for each plate.
4. Loosen the eight (8) screws retaining the front and
rear faceplates.
10. Repeat step eight (8) for the rear plates.
11. Reconnect the unit to its power supply.
Figure 3. R300 Rack Mount Kit Installation
Pelco Manual C518M Rev B (4/91)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5.0 OPERATION AND SYSTEM TEST
5.1 SYSTEM TEST FOR MLZA6DT
5. For Auto operation, put the power switch in the
AUTO/ON position. The IRIS switch should not
operate; ZOOM and FOCUS switches should op-
erate normally. Next, adjust the level of video
using the LEVEL knob on the front panel and
observing the monitor. As the video level is ad-
justed, the iris should open or close depending on
whether video display is bright or dark.
1. Hook up the cable between the output connector
on the MLZA6DT and the input connector on the
lens (see Figure 4).
2. Connect the video cable from the camera to the
VIDEO LOOP-THRU on the rear panel and to the
monitor (see Figure 4).
6. Test the control for fast and slow speeds of all func-
tions by turning the LENS SPEED knob on the
front panel and observing their operation as the
knob is adjusted.
3. Turn the power switch on the MLZA6DT to the
OFF position, and plug the power cord into a 120
VAC power source.
4. For MANUAL operation, put the power switch in
the MAN position. Observing the monitor, test for
proper operation of zoom, focus, and iris functions
with related switches on the front panel.
COAX CABLE
CONTROL CABLE
MLZA6
Figure 4. Basic System Configuration
6
Pelco Manual C518M Rev B (4/91)
Download from Www.Somanuals.com. All Manuals Search And Download.
6.0 MAINTENANCE
Under normal operating conditions and usage, mainte-
nance of this equipment is not necessary. However, if
maintenance should be required, consult Pelco or a
qualified service technician.
NOTE: Pelco offers a 24-hour, seven-days-
a-week Technical Assistance Program (TAP)
designed to assist any customer with a techni-
cal problem involving Pelco equipment whether
it’s the weekend or late at night. For technical
assistance dial (800) 289-9100and you will
be connected to a Pelco TAP member who is
trained to answer your questions.
Pelco also guarantees one-day turnaround on
any Pelco equipment sent in for repair. This
includes warranty and non-warranty items.
Refer to the section on “Warranty and Return
Information” in this manual for the proper pro-
cedure.
Pelco Manual C518M Rev B (4/91)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7.0 SCHEMATIC
BLK
BLU
Figure 5. MLZA6DT Schematic
8
Pelco Manual C518M Rev B (4/91)
Download from Www.Somanuals.com. All Manuals Search And Download.
8.0 SPECIFICATIONS
CONTROLS
Cable
Requirements: Four(4)conductorsplusground;one
(1) additional conductor for manual
override
Zoom:
Paddle switch TELE/WIDE
Focus:
Paddle switch NEAR/FAR
Paddle switch OPEN/CLOSE
Paddle switch AUTO/MANUAL
Knob adjustment
Knob adjustment
Rocker switch
Cable Distances: The following distances are approxi-
mate maximum recommended under
the following conditions:
Manual Iris:
Auto-Iris:
Speed:
Video Level:
On/Off:
— Based on a 35mA load @ 9VDC
— Single lens function activation
— Single common conductor in lens
cable
Pilot Lamp:
Long life neon
— 10%lossinvoltageatthelens motor
ELECTRICAL
22 Awg
795 feet (240 m)
Input Voltage: 120 VAC or 230 VAC, 50/60 Hz
Output Voltage: ±2-12 VDC
Power
20 Awg 1,265 feet (385 m)
18 Awg 2,015 feet (615 m)
16 Awg 3,100 feet (975 m)
Consumption:
Power Cord:
Output
3-6 watts
3-wire grounded, #18 Awg
NOTE: Video limited to 500 feet (152.4 m)
on RG-59 coax cable without equalization am-
plifier.
Connector:
AMP CPC type,
14 pin (mate supplied)
Circuit:
Full wave power supply with solid-
state drive
Highimpedancevideosamplingsolid-
statecontrolwithautomaticshutdown
at end of travel
GENERAL
Construction:
Cover
Chassis
Panel
Iris Drive
Steel, black polyester powder coat
Steel, zinc plated
Aluminum, black polyester powder
coat with white silkscreen
See Figure 6
Video Level:
Video
Impedance:
Video
Adjustable to 1 volt p-p nominal
Dimensions
Weight:
MLZA6DT
High impedance bridging amplifier
BNC
Unit
Shipping
6 lbs (2.7 kg)
4 lbs (1.8 kg)
Connectors:
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
Figure 6. MLZA6DT Dimension Drawing
Pelco Manual C518M Rev B (4/91)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
9.0 WARRANTY AND RETURN
INFORMATION
WARRANTY
RETURNS
Pelco will repair or replace, without charge, any merchandise proved
defectiveinmaterialorworkmanshipforaperiodofoneyearafterthedate
of shipment.
In order to expedite parts returned to the factory for repair or credit, please
call the factory at (800) 289-9100 or (559) 292-1981 to obtain an
authorization number (CA number if returned for credit, and RA number
if returned for repair).
Exceptions to this warranty are as noted below:
All merchandise returned for credit may be subject to a 20% restocking
and refurbishing charge.
•
•
Five years on FT/FR8000 Series fiber optic products.
Three years on Genex® Series products (multiplexers, server, and
keyboard).
Three years on Camclosure® and fixed camera models, except the
CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2,
and MC3651H-2X camera models, which have a five-year warranty.
Goods returned for repair or credit should be clearly identified with the
assigned CA or RA number and freight should be prepaid. Ship to the
appropriate address below.
•
If you are located within the continental U.S., Alaska, Hawaii or Puerto
Rico, send goods to:
•
•
Two years on standard motorized or fixed focal length lenses.
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and
DF5/DF8 Series fixed dome products.
Two years on Spectra®, Esprit®, ExSite™, and PS20 scanners, includ-
ing when used in continuous motion applications.
Two years on Esprit® and WW5700 Series window wiper (excluding
wiper blades).
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
•
•
•
If you are located outside the continental U.S., Alaska, Hawaii or Puerto
Rico and are instructed to return goods to the USA, you may do one of the
following:
Eighteen months on DX Series digital video recorders, NVR300
Series network video recorders, and Endura™ Series distributed
network-based video products.
If the goods are to be sent by a COURIER SERVICE, send the goods to:
Pelco
3500 Pelco Way
Clovis, CA 93612-5699 USA
•
•
One year (except video heads) on video cassette recorders (VCRs).
Video heads will be covered for a period of six months.
If the goods are to be sent by a FREIGHT FORWARDER, send the goods
to:
Six months on all pan and tilts, scanners or preset lenses used in
continuousmotionapplications(thatis,presetscan,tourandautoscan
modes).
Pelco c/o Expeditors
473 Eccles Avenue
Pelco will warrant all replacement parts and repairs for 90 days from the
date of Pelco shipment. All goods requiring warranty repair shall be sent
freight prepaid to Pelco, Clovis, California. Repairs made necessary by
reason of misuse, alteration, normal wear, or accident are not covered
under this warranty.
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933
Pelco assumes no risk and shall be subject to no liability for damages or
loss resulting from the specific use or application made of the Products.
Pelco’s liability for any claim, whether based on breach of contract,
negligence, infringement of any rights of any party or product liability,
relating to the Products shall not exceed the price paid by the Dealer to
Pelco for such Products. In no event will Pelco be liable for any special,
incidental or consequential damages (including loss of use, loss of profit
and claims of third parties) however caused, whether by the negligence
of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The
Dealer may also have additional rights, which are subject to variation from
state to state.
If a warranty repair is required, the Dealer must contact Pelco at (800)
289-9100 or (559) 292-1981 to obtain a Repair Authorization number
(RA), and provide the following information:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice
number
3. Details of the defect or problem If there is a dispute regarding the
warranty of a product which does not fall under the warranty conditions
stated above, please include a written explanation with the product
when returned.
Method of return shipment shall be the same or equal to the method by
which the item was received by Pelco.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
10
Pelco Manual C518M Rev B (4/91)
Download from Www.Somanuals.com. All Manuals Search And Download.
|