Pelco Camcorder IH8 User Manual

®
IH8 Series  
Camera Enclosure  
Installation/Operation  
Manual C439M - 10/92  
5. Only use replacement parts recommended by  
Pelco.  
1.0 SCOPE  
The information contained within this manual covers  
the IH8 Series camera enclosure with integral mount.  
Please thoroughly familiarize yourself with the infor-  
mation in this manual prior to installation and opera-  
tion.  
1.1 WARNING  
To insure safe operation, observe the following guide-  
lines:  
2.0 DESCRIPTION  
The IH8 Series is a light duty camera enclosure with  
integralmountdesignedforindooruse. TheIH8Series  
can be used with 1/3-inch and 1/2-inch cameras and  
will accommodate fixed focal length lenses with or  
without auto-iris operation up to 5 inches in length.  
1
Installation shall be done by qualified service  
and installation personnel.  
2. Installation shall be done in accordance with  
all local and national electrical and mechani-  
cal codes utilizing only approved materials.  
This enclosure has a clamshell cover for easy access  
when installing or servicing the camera/lens.  
Also included in the unique design of this enclosure is  
a cable feedthrough hole, a slotted camera bracket, and  
an integral mount. The IH8 Series enclosure is con-  
structed of .074 ABS plastic and the integral mount is  
aluminum.  
3. Use only installation methods and materials  
capable of supporting four (4) times the maxi-  
mum specified load.  
4. Unless the unit is specifically marked as a  
NEMA Type 3-6P enclosure, it is designed  
for Indoor use only and it must not be installed  
where exposed to rain and moisture.  
PELCO • 300 W. Pontiac Way, Clovis, CA 93612-5699 • (559) 292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827 • DataFAX (800) 289-9108 or (559) 292-0435  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.0 INSTALLATION  
Note: Fasteners to secure the enclosure to a load-  
bearing solid surface are not supplied.  
To install the camera/lens, perform the following:  
1. Using the mount as a template, mark and drill  
holes in the mounting surface. (If you are  
planning to conceal the wiring through the  
mounting surface you will also need to mark  
and drill the cable feedthrough hole at this  
time.)Attachtheenclosurewithintegralmount  
securely to the mounting surface with fasten-  
ers of a suitable size (1/4-20 screws recom-  
mended, not supplied).  
2. Gentlypullthefrontofthehousingtoseparate  
the two halves of the enclosure.  
3. Place the camera/lens onto the slotted camera  
bracket and secure with the 1/4-20 screw  
provided.  
4. Route the coax through the cable feedthrough  
hole located on the rear of the enclosure.  
(If desired,thecoaxcanalsoberoutedthrough  
the feedthrough hole on the mount to conceal  
the wiring through the mounting surface.)  
5. If necessary, shim up the camera/lens using  
flat washers (not provided) to ensure the cam-  
era/lens is in the center of the viewing win-  
dow.  
6. Adjust the camera/lens (front to back) so that  
the lens is as close to the viewing window as  
possible.  
7. Replace front cover.  
Pelco Manual C439M (10/92)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.0WARRANTY AND RETURN  
INFORMATION  
RETURNS  
In order to expedite parts returned to the factory for  
repair or credit, please call the factory at (800) 289-  
9100 or (559) 292-1981 to obtain an authoriza-  
tion number (CA number if returned for credit, and RA  
number if returned for repair). Goods returned for  
repair or credit should be clearly identified with the  
assigned CA/RA number and freight should be pre-  
paid. All merchandise returned for credit may be sub-  
ject to a 20% restocking and refurbishing charge.  
WARRANTY  
PELCO will repair or replace, without charge, any  
merchandise proved defective in material or workman-  
ship for a period of one year after the date of shipment  
(six months on all pan and tilts with auto scan and  
medium duty scanners, and two years on Legacy®,  
Intercept® and CM9500/CM8500 Matrix products).  
PELCO will warranty all replacement parts and repairs  
for 90 days from the date of shipment. All goods for  
warranty work shall be sent freight prepaid to our  
Clovis, California facility. Repairs made necessary by  
reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty. PELCO is not  
liable for any incidental or consequential expenses or  
liability incurred by the customer as a result of field  
repair, installation, or any other reason.  
Ship freight prepaid to: PELCO  
300 West Pontiac Way  
Clovis, CA 93612-5699  
The above warranty is in lieu of any other expressed or  
implied warranty, condition, or guarantee by PELCO  
of the equipment listed herein. PELCO makes no  
warrantiesexceptforintendeduseandwillnotbeliable  
for any loss, damage, or costs arising, whether conse-  
quential or incidental, from the use of said merchan-  
dise.  
®
PELCO  
300 West Pontiac Way  
Clovis, CA 93612-5699 USA  
This warranty gives you specific legal rights. You may  
also have additional rights, which are subject to varia-  
tion from state to state.  
(559) 292-1981 • (800) 289-9100  
FAX (800) 289-9150 or (559) 292-3827  
DataFAX (800) 289-9108 or (559) 292-0435  
If a warranty repair is required, contact PELCO at  
(800) 289-9100 or (559) 292-1981 for a  
Repair Authorization number (RA), and provide the  
following information:  
International customers call 1-559-292-1981 or  
FAX 1-559-348-1120  
(Product specifications subject to change  
without notice.)  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order  
number, or PELCO invoice number  
3. Details of the defect or problem  
C439M  
If there is a dispute regarding the warranty of a product  
which does not fall under the warranty conditions  
stated above, please include a written explanation with  
the product when returned.  
Ship freight prepaid to: PELCO  
300 West Pontiac Way  
Clovis, CA 93612-5699  
Method of return shipment shall be the same as method  
by which the repair item is received by PELCO.  
4
Pelco Manual C439M (10/92)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Network Router C4625M User Manual
Philips Bluetooth Headset SHB7150 User Manual
Philips Bottle Warmer SCF255 33 User Manual
Philips Car Speaker MCI500H 05 User Manual
Philips Clock Radio AJ210 12 User Manual
Philips Iron GC4412 User Manual
Philips TV Antenna 14PT2407 User Manual
Pinnacle Products International Air Cleaner BCB 36 BDF User Manual
Planet Technology Network Card WL U357 User Manual
PYLE Audio Flat Panel Television P32LCD User Manual