Installation and Assembly - Security Fasteners for 10" - 25"
LCD Displays with VESA® 75, VESA 100, VESA 200 x 100 and
VESA 200 x 200 Mounting Patterns
Model: ACC919
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Parts List
Description
Qty. Part #
AA M4 x 10 mm serrated washer head socket pin screw
BB M4 x 20 mm serrated washer head socket pin screw
CC M6 x 12 mm serrated washer head socket pin screw
DD M6 x 20 mm serrated washer head socket pin screw
EE M6 x 30 mm serrated washer head socket pin screw
FF .198" x .313" x .437" H retaining spacer
GG 4 mm security allen wrench
4
4
4
4
4
4
1
5
510-1060
HH
510-1061
510-1050
510-9554
510-1067
590-5005
560-9646
520-1114
AA
CC
FF
EE
BB
HH
M5 X 6 mm socket pin screw
GG
DD
WARNING
• If screws don't get three complete turns in the display inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to display or product may fail.
NOTE: For VESA 200mm and 200 x 100mm
FOR VESA 100 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket to back of display using four M4 x 10mm
screws (AA) as shown below.
1-1
1-2
patterns, see following page.
FOR VESA® 75 MOUNTING PATTERN:
Choose hole pattern as shown below. Attach hook
bracket to back of display using four M4 x 10mm
screws (AA) as shown below.
*NOTE: If hole pattern is in a pocket, attach hook
bracket to back of display using four M4 x 20mm
screws (BB) and four retaining spacers (FF) as
indicated below.
AA
BRACKET
AA
BRACKET
*For displays with a
hole pattern in a pocket,
spacers (FF) go between
hook bracket and display.
FF
ISSUED: 07-18-05 SHEET #: 095-9245-4 06-13-11
For customer care call 1-800-729-0307
1 of 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Removing Flat Panel Display
To attach display to wall mount, lower hook bracket
DISPLAY
3
into pockets of wall mount. Once clips are engaged,
push down to seat clips into pockets. Insert and
tighten M5 x 6mm screws (HH) to lock screen to
wall mount as shown in figure 3.1.
HH
To remove screen from mount, loosen screw (HH)
and lift screen off of mount.
WARNING
• Do not lift more weight than you can handle.
Use additional man power or mechanical lifting
equipment to safely handle placement of the screen.
CLIP
POCKET
• Failure to lock hook bracket with screw (HH) can
cause screen to come off mount if hit accidentally.
fig. 3.1
ISSUED: 07-18-05 SHEET #: 095-9245-4 06-13-11
For customer care call 1-800-729-0307
3 of 3
© 2011 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|