Windsor™ Studio
All-Tube Combo Amplifier
Operating
anual
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using electrical products, basic cautions should always be followed, including the following:
1.
Read these instructions.
2.
3.
4.
5.
6.
7.
8.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers)
that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
they exit from the apparatus.
11.
Only use attachments/accessories provided by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.
14.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15.
Never break off the ground pin. Write for our free booklet “Shock Hazard and Grounding.” Connect only to a power
supply of the type marked on the unit adjacent to the power supply cord.
16.
17.
If this product is to be mounted in an equipment rack, rear support should be provided.
Note for UK only: If the colors of the wires in the mains lead of this unit do not correspond with the terminals in your
plug‚ proceed as follows:
a) The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E‚ the earth
symbol‚ colored green or colored green and yellow.
b) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black.
c) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red.
18.
19.
This electrical apparatus should not be exposed to dripping or splashing and care should be taken not to place objects
containing liquids, such as vases, upon the apparatus.
Exposure to extremely high noise levels may cause a permanent hearing loss. Individuals vary considerably in suscep-
tibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise
for a sufficient time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the
following permissible noise level exposures:
Duration Per Day In Hours
Sound Level dBA, Slow Response
8
6
90
92
4
95
3
97
2
1 1⁄2
1
1⁄2
100
102
105
110
115
1⁄4 or less
According to OSHA, any exposure in excess of the above permissible limits could result in some hearing loss. Ear plugs or protectors to
the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if
exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is
recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be
protected by hearing protectors while this unit is in operation.
SAVE THESE INSTRUCTIONS!
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
WICHTIGE SICHERHEITSHINWEISE
ACHTUNG: Beim Einsatz von Elektrogeräten müssen u.a. grundlegende Vorsichtsmaßnahmen befolgt werden:
1.
Lesen Sie sich diese Anweisungen durch.
2.
3.
4.
5.
6.
7.
8.
Bewahren Sie diese Anweisungen auf.
Beachten Sie alle Warnungen.
Befolgen Sie alle Anweisungen.
Setzen Sie dieses Gerät nicht in der Nähe von Wasser ein.
Reinigen Sie es nur mit einem trockenen Tuch.
Blockieren Sie keine der Lüftungsöffnungen. Führen Sie die Installation gemäß den Anweisungen des Herstellers durch.
Installieren Sie das Gerät nicht neben Wärmequellen wie Heizungen, Heizgeräten, Öfen oder anderen Geräten (auch Verstärkern),
die Wärme erzeugen.
9.
Beeinträchtigen Sie nicht die Sicherheitswirkung des gepolten Steckers bzw. des Erdungssteckers. Ein gepolter Stecker weist
zwei Stifte auf, von denen einer breiter ist als der andere. Ein Erdungsstecker weist zwei Stifte und einen dritten Erdungsstift auf.
Der breite Stift bzw. der dritte Stift dient Ihrer Sicherheit. Sollte der beiliegende Stecker nicht in Ihre Steckdose passen, wenden
Sie sich bitte an einen Elektriker, um die ungeeignete Steckdose austauschen zu lassen.
10.
Schützen Sie das Netzkabel, sodass niemand darauf tritt oder es geknickt wird, insbesondere an Steckern oder Buchsen und
ihren Austrittsstellen aus dem Gerät.
11.
Verwenden Sie nur die vom Hersteller erhältlichen Zubehörgeräte oder Zubehörteile.
12.
Verwenden Sie nur einen Wagen, Stativ, Dreifuß, Träger oder Tisch, der den Angaben des Herstellers entspricht oder zusammen
mit dem Gerät verkauft wurde. Wird ein Wagen verwendet, bewegen Sie den Wagen mit dem darauf befindlichen Gerät besonders
vorsichtig, damit er nicht umkippt und möglicherweise jemand verletzt wird.
13.
14.
Trennen Sie das Gerät während eines Gewitters oder während längerer Zeiträume, in denen es nicht benutzt wird, von der
Stromversorgung.
Lassen Sie sämtliche Wartungsarbeiten von qualifizierten Kundendiensttechnikern durchführen. Eine Wartung ist erforderlich,
wenn das Gerät in irgendeiner Art beschädigt wurde, etwa wenn das Netzkabel oder der Netzstecker beschädigt wurden,
Flüssigkeit oder Gegenstände in das Gerät gelangt sind, das Gerät Regen oder Feuchtigkeit ausgesetzt wurde, nicht normal
arbeitet oder heruntergefallen ist.
15.
Der Erdungsstift darf nie entfernt werden. Auf Wunsch senden wir Ihnen gerne unsere kostenlose Broschüre „Shock Hazard and
Grounding“ (Gefahr durch elektrischen Schlag und Erdung) zu. Schließen Sie nur an die Stromversorgung der Art an, die am
Gerät neben dem Netzkabel angegeben ist.
16.
17.
Wenn dieses Produkt in ein Geräte-Rack eingebaut werden soll, muss eine Versorgung über die Rückseite eingerichtet werden.
Hinweis – Nur für Großbritannien: Sollte die Farbe der Drähte in der Netzleitung dieses Geräts nicht mit den Klemmen in Ihrem
Stecker übereinstimmen, gehen Sie folgendermaßen vor:
a) Der grün-gelbe Draht muss an die mit E (Symbol für Erde) markierte bzw. grüne oder grün-gelbe Klemme angeschlossen
werden.
b) Der blaue Draht muss an die mit N markierte bzw. schwarze Klemme angeschlossen werden.
c) Der braune Draht muss an die mit L markierte bzw. rote Klemme angeschlossen werden.
18.
19.
Dieses Gerät darf nicht ungeschützt Wassertropfen und Wasserspritzern ausgesetzt werden und es muss darauf geachtet
werden, dass keine mit Flüssigkeiten gefüllte Gegenstände, wie z. B. Blumenvasen, auf dem Gerät abgestellt werden.
Belastung durch extrem hohe Lärmpegel kann zu dauerhaftem Gehörverlust führen. Die Anfälligkeit für durch Lärm bedingten
Gehörverlust ist von Mensch zu Mensch verschieden, das Gehör wird jedoch bei jedem in gewissem Maße geschädigt, der über
einen bestimmten Zeitraum ausreichend starkem Lärm ausgesetzt ist. Die US-Arbeitsschutzbehörde (Occupational and Health
Administration, OSHA) hat die folgenden zulässigen Pegel für Lärmbelastung festgelegt:
Dauer pro Tag in Stunden
Geräuschpegel dBA, langsame Reaktion
8
6
4
3
90
92
95
97
2
1 ⁄
100
102
105
110
115
1
2
1
1
⁄
2
1
⁄
4
oder weniger
Laut OSHA kann jede Belastung über den obenstehenden zulässigen Grenzwerten zu einem gewissen Gehörverlust führen. Sollte
die Belastung die obenstehenden Grenzwerte übersteigen, müssen beim Betrieb dieses Verstärkungssystems Ohrenstopfen oder
Schutzvorrichtungen im Gehörgang oder über den Ohren getragen werden, um einen dauerhaften Gehörverlust zu verhindern. Um sich vor
einer möglicherweise gefährlichen Belastung durch hohe Schalldruckpegel zu schützen, wird allen Personen empfohlen, die mit Geräten
arbeiten, die wie dieses Verstärkungssystem hohe Schalldruckpegel erzeugen können, beim Betrieb dieses Geräts einen Gehörschutz zu tra-
gen.
BEWAHREN SIE DIESE SICHERHEITSHINWEISE AUF!
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTIONS IMPORTANTES DE SECURITE
ATTENTION: L’utilisation de tout appareil électrique doit être soumise aux precautions d’usage incluant:
1.
Lire ces instructions.
2.
3.
4.
5.
6.
7.
Gardez ce manuel pour de futures références.
Prétez attention aux messages de précautions de ce manuel.
Suivez ces instructions.
N’utilisez pas cette unité proche de plans d’eau.
N’utilisez qu’un tissu sec pour le nettoyage de votre unité.
N’obstruez pas les systèmes de refroidissement de votre unité et installez votre unité en fonction des instructions
de ce manuel.
8.
9.
Ne positionnez pas votre unité à proximité de toute source de chaleur.
Connectez toujours votre unité sur une alimentation munie de prise de terre utilisant le cordon d’alimentation
fourni.
10.
11.
12.
Protégez les connecteurs de votre unité et positionnez les cablages pour éviter toutes déconnexions accidentelles.
N’utilisez que des fixations approuvées par le fabriquant.
Lors de l’utilsation sur pied ou pole de support, assurez dans le cas de déplacement de l’ensemble enceinte/
support de prévenir tout basculement intempestif de celui-ci.
13.
14.
Il est conseillé de déconnecter du secteur votre unité en cas d’orage ou de durée prolongée sans utilisation.
Seul un technicien agréé par le fabriquant est à même de réparer/contrôler votre unité. Celle-ci doit être contrôlée si
elle a subit des dommages de manipulation, d’utilisation ou de stockage (humidité,…).
15.
16.
17.
Ne déconnectez jamais la prise de terre de votre unité.
Si votre unité est destinée a etre montée en rack, des supports arriere doivent etre utilises.
Note pour les Royaumes-Unis: Si les couleurs de connecteurs du cable d’alimentation ne correspond pas au guide
de la prise secteur, procédez comme suit:
a) Le connecteur vert et jaune doit être connectrer au terminal noté E, indiquant la prise de terre ou correspondant
aux couleurs verte ou verte et jaune du guide.
b) Le connecteur Bleu doit être connectrer au terminal noté N, correspondnat à la couleur noire du guide.
c) Le connecteur marron doit être connectrer au terminal noté L, correspondant à la couleur rouge du guide.
18.
19.
Cet équipement électrique ne doit en aucun cas être en contact avec un quelconque liquide et aucun objet
contenant un liquide, vase ou autre ne devrait être posé sur celui-ci.
Une exposition à de hauts niveaux sonores peut conduire à des dommages de l’écoute irréversibles. La suscep-
tibilité au bruit varie considérablement d’un individu à l’autre, mais une large majorité de la population expériencera
une perte de l’écoute après une exposition à une forte puissance sonore pour une durée prolongée. L’organisme de
la santé américaine (OSHA) a produit le guide ci-dessous en rapport à la perte occasionnée:
Durée par Jour (heures)
Niveau sonore moyen (dBA)
8
6
4
3
90
92
95
97
2
1 ⁄
100
102
105
110
115
1
2
1
1
⁄
2
1
⁄
4
ou inférieur
D’après les études menées par le OSHA, toute exposition au delà des limites décrites ce-dessus entrainera des pertes de l’écoute chez la
plupart des sujets. Le port de système de protection (casque, oreilette de filtrage,…) doit être observé lors de l’opération cette unité ou des
dommages irréversibles peuvent être occasionnés. Le port de ces systèmes doit être observé par toutes personnes susceptibles d’être expo-
sées à des conditions au delà des limites décrites ci-dessus.
GARDEZ CES INSTRUCTIONS!
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCCIONES IMPORTANTES PARA SU SEGURIDAD
CUIDADO: Cuando use productos electrónicos, debe tomar precauciones básicas, incluyendo las siguientes:
1.
Lea estas instrucciones.
2.
3.
4.
5.
6.
7.
8.
Guarde estas instrucciones.
Haga caso de todos los consejos.
Siga todas las instrucciones.
No usar este aparato cerca del agua.
Limpiar solamente con una tela seca.
No bloquear ninguna de las salidas de ventilación. Instalar de acuerdo a las instrucciones del fabricante.
No instalar cerca de ninguna fuente de calor como radiadores, estufas, hornos u otros aparatos (incluyendo amplificadores)
que produzcan calor.
9.
No retire la patilla protectora del enchufe polarizado o de tipo “a Tierra”. Un enchufe polarizado tiene dos puntas, una de
ellas más ancha que la otra. Un enchufe de tipo “a Tierra” tiene dos puntas y una tercera “a Tierra”. La punta ancha (la
tercera ) se proporciona para su seguridad. Si el enchufe proporcionado no encaja en su enchufe de red, consulte a un
electricista para que reemplaze su enchufe obsoleto.
10.
Proteja el cable de alimentación para que no sea pisado o pinchado, particularmente en los enchufes, huecos, y los puntos
que salen del aparato.
11.
Usar solamente añadidos/accesorios proporcionados por el fabricante.
12.
Usar solamente un carro, pie, trípode, o soporte especificado por el fabricante, o vendido junto al aparato. Cuando se use
un carro, tenga cuidado al mover el conjunto carro/aparato para evitar que se dañe en un vuelco. No suspenda esta caja de
ninguna manera.
13.
14.
Desenchufe este aparato durante tormentas o cuando no sea usado durante largos periodos de tiempo.
Para cualquier reparación, acuda a personal de servicio cualificado. Se requieren reparaciones cuando el aparato ha sido
dañado de alguna manera, como cuando el cable de alimentación o el enchufe se han dañado, algún líquido ha sido
derramado o algún objeto ha caído dentro del aparato, el aparato ha sido expuesto a la lluvia o la humedad, no funciona de
manera normal, o ha sufrido una caída.
15.
Nunca retire la patilla de Tierra.Escríbanos para obtener nuestro folleto gratuito “Shock Hazard and Grounding” (“Peligro
de Electrocución y Toma a Tierra”). Conecte el aparato sólo a una fuente de alimentación del tipo marcado al lado del cable
de alimentación.
16.
17.
Si este producto va a ser enracado con más equipo, use algún tipo de apoyo trasero.
Nota para el Reino Unido solamente: Si los colores de los cables en el enchufe principal de esta unidad no corresponden
con los terminales en su enchufe‚ proceda de la siguiente manera:
a) El cable de color verde y azul debe ser conectado al terminal que está marcado con la letra E‚ el símbolo de Tierra
(earth)‚ coloreado en verde o en verde y amarillo.
b) El cable coloreado en azul debe ser conectado al terminal que está marcado con la letra N o el color negro.
c) El cable coloreado en marrón debe ser conectado al terminal que está marcado con la letra L o el color rojo.
18.
19.
Este aparato eléctrico no debe ser sometido a ningún tipo de goteo o salpicadura y se debe tener cuidado para no poner
objetos que contengan líquidos, como vasos, sobre el aparato.
La exposición a altos niveles de ruido puede causar una pérdida permanente en la audición. La susceptibilidad a la pérdida
de audición provocada por el ruido varía según la persona, pero casi todo el mundo perderá algo de audición si se expone
a un nivel de ruido suficientemante intenso durante un tiempo determinado. El Departamento para la Salud y para la
Seguridad del Gobierno de los Estados Unidos (OSHA) ha especificado las siguientes exposiciones al ruido permisibles:
Duración por Día en Horas Nivel de Sonido dBA, Respuesta Lenta
8
6
4
3
90
92
95
97
2
1 ⁄
100
102
105
110
115
1
2
1
1
⁄
2
1
⁄
4
o menos
De acuerdo al OSHA, cualquier exposición que exceda los límites arriba indicados puede producir algún tipo de pérdida en la audición.
Protectores para los canales auditivos o tapones para los oídos deben ser usados cuando se opere con este sistema de sonido para preve-
nir una pérdida permanente en la audición, si la exposición excede los límites indicados más arriba. Para protegerse de una exposición a
altos niveles de sonido potencialmente peligrosa, se recomienda que todas las personas expuestas a equipamiento capaz de producir altos
niveles de presión sonora, tales como este sistema de amplificación, se encuentren protegidas por protectores auditivos mientras esta uni-
dad esté operando.
GUARDE ESTAS INSTRUCCIONES!
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Windsor Studio™
All-Tube Combo Amplifier
Congratulations on your purchase of the new Windsor Studio tube combo amplifier from Peavey. The Windsor Studio offers
more “bang for your buck” than any other combo amp on the market and the tones that you will experience from this 1 x 12”
Class A powerhouse will more than hold their own with the most sought after boutique models on the market, at a fraction
of the price. That said, the Windsor Studio is still made from top-shelf components with all of the reliability that you have
come to expect from Peavey.
This versatile new single-channel combo offers several new features that make it perfectly suited for any guitar amp
application, whether it be home recording or live use. The all-new Recording Output circuit provides a microphone-
simulated XLR connection for patching to PA or recording gear. Since this 100% passive (no clipping) circuit taps directly
from the speaker output, the resulting sound gives a simulation of a microphone strategically placed in front of whatever
™
speaker you are using….no more tripping over mics on stage! It also features the new “Power Sponge ” feature, which is a
continuous power level control, between the output and speaker, which provides a constant load impedance to the output,
with respect to the setting of the control and the impedance of the speaker….the result is a “transparent” output attenuator
that is variable from full power to none at all. Furthermore, the “Power Sponge” setting does not affect the level or the
Recording Output. In addition, a variety of common large power tubes may be used without the need for re-biasing. The
Windsor Studio is the perfect combination of simplicity and flexibility.
Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC
line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the
rear panel of the unit. Each product feature is numbered. Refer to the front panel diagram in this manual to locate
the particular features next to its number.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.
FEATURES:
• Class A Power Amp can use various octal power tubes including EL34 (stock), 6L6GC, 6550, 6CA7, KT88, KT66, or any
variation on these types.
• 2 x 12AX7/ECC83 Preamp tubes
• 0-20W (rms) into 4, 8, or 16 Ohms with Power Sponge™ output power attenuator
• No negative feedback in Power Amp
• High & Low Gain Inputs
• Preamp Volume
• Low, Mid, and High EQ
• Footswitchable Boost function
• Footswitchable Effects Loop
• Master Volume
• Spring Reverb
• Transformer balanced XLR Recording Output w/passive mic simulator
• XLR Ground Lift switch
• Dual Speaker Outputs
• Impedance Selector
• 1/4” TRS footswitch jack for Boost and Loop defeat
• Jeweled Pilot Lens
• Power and Standby switches
• 12” Blue Marvel Speaker
Ventilation: For proper ventilation, allow 24" clearance from nearest combustible surface.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
4
6
7
5
1
2
3
8
1
2
High Gain Input -
Used for most electric guitars. It is 10dB more sensitive than the LOW GAIN INPUT (2).
Low Gain Input -
Provided for instruments that have extremely high outputs, which may result in overdriving or distorting
the HIGH GAIN INPUT (1). If both inputs are used simultaneously, the levels of both are that of the Low
Gain Input.
3
4
Preamp Volume -
Controls the input signal level to the preamp, before the 2nd tube stage.
Bass, Middle, and Treble EQ -
Passive tone controls that regulate the low, mid, and high frequency response character of the amplifier,
respectively. This is a conventional “tonestack” circuit in which these three controls are highly
interactive with one another.
5
Boost -
Acts as a frequency selective extension to the MASTER VOLUME control (8). When depressed, this
switch boosts the overall volume level to the power amp section while reducing low frequency content,
which can create flatulent sounds, in excess. This function is very well suited to boosting for solos or
for use with harmonica and can be controlled via an optional footswitch (#00592720).
6
7
Effects Send -
Standard 1/4” output jack for supplying signals to external low-level effects or other signal processing
equipment. The EFFECTS LOOP can be defeated via an optional footswitch (#00592720).
Effects Return -
Standard 1/4” input jack for returning signals from external low-level effects or other signal processing
equipment. This is a switching jack and may also be used as a direct input to the power amplifier
section, while disconnecting the internal preamp at the same time. The EFFECTS LOOP can be defeated
via an optional footswitch (#00592720).
8
Master Volume -
Controls the overall level of the preamp signal being sent to the power amplifier.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
9
10
11
12
9
Reverb -
Controls the amount of reverberation that is mixed into the signal path.
10
Pilot Light -
Illuminates when AC power is being supplied to the amplifier.
11 Standby Switch -
Placing this switch in the “STANDBY” position will effectively shut the amplifier off while keeping
all heater and bias supplies active and ready to go. Leave this switch in the “STANDBY” position for
a minimum of one (1) minute after initially engaging the POWER SWITCH (12). This is also a useful
feature, since much tube wear comes from the heating and cooling of the actual tube. Leaving the unit
in “STANDBY”, for short durations, allows the tubes to remain at their optimal operating temperature
while you are not playing. For extended periods, it is best to disengage both the STANDBY and POWER
switches.
12
Power Switch -
To apply power to the amplifier, flip this switch to the “ON” position. The red PILOT LIGHT (10) will
illuminate, indicating that AC power is being supplied.
WARNING
THE ON/OFF SWITCH IN THIS APPARATUS
DOES NOT BREAK BOTH SIDES OF THE MAINS.
HAZARDOUS ENERGY MAY BE PRESENT INSIDE
THE ENCLOSURE WHEN THE POWER SWITCH IS
IN THE OFF POSITION.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
13
14
15
16
AC Power Inlet -
13
This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord
to this connector to provide power to the unit. Damage to the equipment may result if improper line
voltage is used. (See line voltage marking on unit).
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does
not have a ground pin, a suitable grounding adapter should be used and the third wire should be
grounded properly. To prevent the risk of shock or fire hazard, always make sure that the amplifier and
all associated equipment is properly grounded.
Note: For UK Only
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored
markings identifying the terminals in your plug, proceed as follows: (1) The wire which is colored green
and yellow must be connected to the terminal which is marked by the letter E, or by the Earth symbol,
or colored green or green and yellow. (2) The wire which is colored blue must be connected to the
terminal which is marked with the letter N, or the color black. (3) The wire which is colored brown must
be connected to the terminal which is marked with the letter L, or the color red.
To avoid the risk of electrical shock, do not place fingers or any other objects into empty tube sockets
while power is being supplied to unit.
External Speaker Jacks -
14
15
Provided for connection of external speaker cabinets. Load Impedance is selectable via the IMPEDANCE
SELECTOR (15) on the Windsor Studio.
Impedance Selector -
This three position switch allows appropriate selection of speaker cabinet impedance. If two enclosures
of equal impedance are used, the switch should be set to half of the value of the two individual
cabinets. For instance, two 16 Ohm enclosures necessitate an 8 Ohm setting, while two 8 Ohm
enclosures would require a 4 Ohm setting. Minimum recommended load impedance is 4 Ohms.
16
Ground Lift -
Depress this switch to break any ground loops that may be causing hum between your amplifier and
recording device or PA system.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
17
19
18
17 Recording Output -
This balanced XLR jack is used to route a microphone-simulated signal (tapped directly from whatever
speaker is being used) from the amplifier to an external recording device or PA. It utilizes a 100%
passive circuit to avoid clipping, noise, and other shortcomings of active circuitry.
18 Power Sponge™ -
This unique control allows the user to adjust the nominal output power level of the amplifier. It can
be used in conjunction with the PREAMP VOLUME (3) and MASTER VOLUME (8) to attain infinite
combinations of power amp and preamp distortion at ANY volume level. This control DOES NOT affect
the level of the RECORDING OUTPUT (17) and provides an appropriate load to the amplifier at all
settings.
Remote Switch -
19
Provided for connection of the optional footswitch (#00592720). The footswitch is used to defeat the
EFFECTS LOOP (6/7) and the BOOST (5). LEDs on the footswitch illuminate when the respective function
is active. When using the footswitch, always insert the plug fully (second click) into the REMOTE
SWITCH jack to ensure proper operation.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Windsor™ Studio
Guitar Amplifier
Suggested Settings
1.) Thick Clean / Classic Lead:
Preamp Volume = 5 - 7
Bass = 11 - 12
Middle = 5 - 7
Treble = 5 - 7
Master Volume = Adjust to taste.
2.) High Gain / Hard Rock:
Preamp Volume = 9 - 11
Bass = 7 - 9
Middle = 7 - 9
Treble = 5 - 7
Master Volume = Adjust to taste.
*NOTE: Use your guitar's volume control for additional control over preamp and power amp
distortion. The point of clipping will depend heavily on the guitar that you are using and your control
over it's output, via the volume control.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Windsor™ Studio
Guitar Amplifier
SPECIFICATIONS
Rated Power and Tube Compliment
Effects Loop:
14-16W (rms) with the following: EL34 (stock), KT77,
6CA7, CV1741, CV741, E34L.
Send Load Impedance: 22K ohms or greater
Send Nominal Output Level: 0 dBV, 1.0 V(rms)
Return Input Impedance: 1 Megohm
Return Nominal Input Level: 0 dBV, 1.0 V(rms)
10-12W (rms) with the following: 6L6GC, 5881, KT66,
7581, 5932, N66, EL37, DL37, CV1947, CV1075,
CV586.
Dimensions:
18.5"(H) x 21.38" (W) x 10.25" (D)
17-20W (rms) with the following: 6550, KT90, KT100,
CV5220, 12E13, 7D11.
Weight:
36.0 lbs
Power Consumption:
Remote Footswitch (optional):
Special 2-button unit with LED indicators for Effects
Loop (Channel/Loop) selection and a special preset
Boost, selectable via the front panel. Accessory order
#00592720.
100W, 60Hz, 120VAC (Domestic)
100W, 50/60Hz, 230VAC (Export)
100W, 50/60Hz, 100VAC (Japan)
Preamp Inputs:
High Gain Impedance: Very-high Z; 470K ohms
Low gain Impedance: High Z; 68K ohms (-10dB)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY
Effective Date: june 14, 2006
8IBUꢀ5IJTꢀ8BSSBOUZꢀ$PWFST
:PVSꢀ1FBWFZꢀ8BSSBOUZꢀDPWFSTꢀEFGFDUTꢀJOꢀNBUFSJBMꢀBOEꢀXPSLNBOTIJQꢀJOꢀ1FBWFZꢀQSPEVDUTꢀQVSDIBTFEꢀBOEꢀTFSWJDFEꢀJOꢀUIFꢀ6ꢁ4ꢁ"ꢁꢀBOEꢀ$BOBEBꢁ
8IBUꢀ5IJTꢀ8BSSBOUZꢀ%PFTꢀ/PUꢀ$PWFS
5IFꢀ8BSSBOUZꢀEPFTꢀOPUꢀDPWFSꢂꢀ ꢃꢄꢀEBNBHFꢀDBVTFEꢀCZꢀBDDJEFOUꢅꢀNJTVTFꢅꢀBCVTFꢅꢀJNQSPQFSꢀJOTUBMMBUJPOꢀPSꢀPQFSBUJPOꢅꢀSFOUBMꢅꢀQSPEVDUꢀNPEJGJDBUJPOꢀPSꢀOFHMFDUꢆꢀ ꢇꢄꢀEBNꢈ
BHFꢀPDDVSSJOHꢀEVSJOHꢀTIJQNFOUꢆꢀ ꢉꢄꢀEBNBHFꢀDBVTFEꢀCZꢀSFQBJSꢀPSꢀTFSWJDFꢀQFSGPSNFEꢀCZꢀQFSTPOTꢀOPUꢀBVUIPSJ[FEꢀCZꢀ1FBWFZꢆꢀ ꢊꢄꢀQSPEVDUTꢀPOꢀXIJDIꢀUIFꢀTFSJBMꢀOVNCFSꢀ
IBTꢀCFFOꢀBMUFSFEꢅꢀEFGBDFEꢀPSꢀSFNPWFEꢆꢀ ꢋꢄꢀQSPEVDUTꢀOPUꢀQVSDIBTFEꢀGSPNꢀBOꢀ"VUIPSJ[FEꢀ1FBWFZꢀ%FBMFSꢁ
8IPꢀ5IJTꢀ8BSSBOUZꢀ1SPUFDUT
5IJTꢀ8BSSBOUZꢀQSPUFDUTꢀPOMZꢀUIFꢀPSJHJOBMꢀSFUBJMꢀQVSDIBTFSꢀPGꢀUIFꢀQSPEVDUꢁꢀ
)PXꢀ-POHꢀ5IJTꢀ8BSSBOUZꢀ-BTUT
5IFꢀ8BSSBOUZꢀCFHJOTꢀPOꢀUIFꢀEBUFꢀPGꢀQVSDIBTFꢀCZꢀUIFꢀPSJHJOBMꢀSFUBJMꢀQVSDIBTFSꢁꢀꢀ5IFꢀEVSBUJPOꢀPGꢀUIFꢀ8BSSBOUZꢀJTꢀBTꢀGPMMPXTꢂ
1SPEVDUꢀ$BUFHPSZꢀ
%VSBUJPOꢀ
Guitars/Basses,Amplifiers, Pre-Amplifiers, Mixers, Electronic
Crossovers and Equalizers
2 years (+ 3 years)*
2 years (+ 1 year)*
3 years (+ 2 years)*
1 year (+ 1 year)*
2 years
Drums
Enclosures
Digital Effect Devices and Keyboard and MIDI Controllers
Microphones
Speaker Components (incl. speakers, baskets, drivers,
diaphragm replacement kits and passive crossovers)
1 year
90 days
Tubes and Meters
Cables
Limited Lifetime
[*Denotes additional warranty period applicable if optional Warranty Registration Card is completed and returned to Peavey by original retail purchaser within 90 days
of purchase.]
8IBUꢀ1FBWFZꢀ8JMMꢀ%P
8FꢀXJMMꢀSFQBJSꢀPSꢀSFQMBDFꢀ BUꢀ1FBWFZꢁTꢀEJTDSFUJPOꢂꢀQSPEVDUTꢀDPWFSFEꢀCZꢀXBSSBOUZꢀBUꢀOPꢀDIBSHFꢀGPSꢀMBCPSꢀPSꢀNBUFSJBMTꢃꢀꢀ*GꢀUIFꢀQSPEVDUꢀPSꢀDPNQPOFOUꢀNVTUꢀCFꢀTIJQQFEꢀUPꢀ
1FBWFZꢀGPSꢀXBSSBOUZꢀTFSWJDFꢄꢀUIFꢀDPOTVNFSꢀNVTUꢀQBZꢀJOJUJBMꢀTIJQQJOHꢀDIBSHFTꢃꢀꢀ*GꢀUIFꢀSFQBJSTꢀBSFꢀDPWFSFEꢀCZꢀXBSSBOUZꢄꢀ1FBWFZꢀXJMMꢀQBZꢀUIFꢀSFUVSOꢀTIJQQJOHꢀDIBSHFTꢃ
)PXꢀ5Pꢀ(FUꢀ8BSSBOUZꢀ4FSWJDF
ꢁꢂꢀ5BLFꢀUIFꢀEFGFDUJWFꢀJUFNꢀBOEꢀZPVSꢀTBMFTꢀSFDFJQUꢀPSꢀPUIFSꢀQSPPGꢀPGꢀEBUFꢀPGꢀQVSDIBTFꢀUPꢀZPVSꢀ"VUIPSJ[FEꢀ1FBWFZꢀ%FBMFSꢀPSꢀ"VUIPSJ[FEꢀ1FBWFZꢀ4FSWJDFꢀ$FOUFSꢃꢀ
OR
ꢁꢂꢃ4IJQꢃUIFꢃEFGFDUJWFꢃJUFNꢄꢃQSFQBJEꢄꢃUPꢃ1FBWFZꢃ&MFDUSPOJDTꢃ$PSQPSBUJPOꢄꢃ*OUFSOBUJPOBMꢃ4FSWJDFꢃ$FOUFSꢄꢃꢅꢆꢁꢃ)JHIXBZꢃꢆꢆꢃꢇꢃꢈꢉꢃ&BTUꢄꢃ.FSJEJBOꢄꢃ.4ꢃꢊꢋꢊꢉꢆꢀꢃ*ODMVEFꢃBꢃ
EFUBJMFEꢃEFTDSJQUJPOꢃPGꢃUIFꢃQSPCMFNꢄꢃUPHFUIFSꢃXJUIꢃBꢃDPQZꢃPGꢃZPVSꢃTBMFTꢃSFDFJQUꢃPSꢃPUIFSꢃQSPPGꢃPGꢃEBUFꢃPGꢃQVSDIBTFꢃBTꢃFWJEFODFꢃPGꢃXBSSBOUZꢃDPWFSBHFꢀꢃ"MTPꢃQSPWJEFꢃBꢃ
DPNQMFUFꢃSFUVSOꢃBEESFTTꢀ
ꢀ
-JNJUBUJPOꢀPGꢀ*NQMJFEꢀ8BSSBOUJFT
"/:ꢀ*.1-*&%ꢀ8"33"/5*&4ꢄꢀ*/$-6%*/(ꢀ8"33"/5*&4ꢀ0'ꢀ.&3$)"/5"#*-*5:ꢀ"/%ꢀ'*5/&44ꢀ'03ꢀ"ꢀ1"35*$6-"3ꢀ163104&ꢄꢀ"3&ꢀ-*.*5&%ꢀ*/ꢀ%63"5*0/ꢀ50ꢀ5)&ꢀ
-&/(5)ꢀ0'ꢀ5)*4ꢀ8"33"/5:ꢃꢀꢀ
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
&YDMVTJPOTꢀPGꢀ%BNBHFT
1&"7&:ꢁ4ꢀ-*"#*-*5:ꢀ'03ꢀ"/:ꢀ%&'&$5*7&ꢀ130%6$5ꢀ*4ꢀ-*.*5&%ꢀ50ꢀ5)&ꢀ3&1"*3ꢀ03ꢀ3&1-"$&.&/5ꢀ0'ꢀ5)&ꢀ130%6$5ꢄꢀ"5ꢀ1&"7&:ꢁ4ꢀ015*0/ꢃꢀꢀ*'ꢀ8&ꢀ&-&$5ꢀ50ꢀ
3&1-"$&ꢀ5)&ꢀ130%6$5ꢄꢀ5)&ꢀ3&1-"$&.&/5ꢀ.":ꢀ#&ꢀ"ꢀ3&$0/%*5*0/&%ꢀ6/*5ꢃꢀꢀ1&"7&:ꢀ4)"--ꢀ/05ꢀ#&ꢀ-*"#-&ꢀ'03ꢀ%"."(&4ꢀ#"4&%ꢀ0/ꢀ*/$0/7&/*&/$&ꢄꢀ-044ꢀ0'ꢀ
64&ꢄꢀ-045ꢀ130'*54ꢄꢀ-045ꢀ4"7*/(4ꢄꢀ%"."(&ꢀ50ꢀ"/:ꢀ05)&3ꢀ&26*1.&/5ꢀ03ꢀ05)&3ꢀ*5&.4ꢀ"5ꢀ5)&ꢀ4*5&ꢀ0'ꢀ64&ꢄꢀ03ꢀ"/:ꢀ05)&3ꢀ%"."(&4ꢀ8)&5)&3ꢀ*/$*%&/5"-ꢄꢀ
$0/4&26&/5*"-ꢀ03ꢀ05)&38*4&ꢄꢀ&7&/ꢀ*'ꢀ1&"7&:ꢀ)"4ꢀ#&&/ꢀ"%7*4&%ꢀ0'ꢀ5)&ꢀ1044*#*-*5:ꢀ0'ꢀ46$)ꢀ%"."(&4ꢃ
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
ThisWarranty gives you specific legal rights, and you may also have other rights which vary from state to state.
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
*GꢀZPVꢀIBWFꢀBOZꢀRVFTUJPOTꢀBCPVUꢀUIJTꢀXBSSBOUZꢀPSꢀTFSWJDFꢀSFDFJWFEꢀPSꢀJGꢀZPVꢀOFFEꢀBTTJTUBODFꢀJOꢀMPDBUJOHꢀBOꢀ"VUIPSJ[FEꢀ4FSWJDFꢀ$FOUFSꢄꢀQMFBTFꢀDPOUBDUꢀUIFꢀ1FBWFZꢀ
ꢀ
*OUFSOBUJPOBMꢀ4FSWJDFꢀ$FOUFSꢀBUꢀ ꢎꢊꢆꢂꢀꢅꢉꢋꢏꢍꢋꢎꢍꢀꢐꢀUꢀ
'FBUVSFTꢀBOEꢀTQFDJGJDBUJPOTꢀTVCKFDUꢀUPꢀDIBOHFꢀXJUIPVUꢀOPUJDFꢁ
Logo referenced in Directive 2002/96/EC Annex IV
(OJ(L)37/38,13.02.03 and defined in EN 50419: 2005
The bar is the symbol for marking of new waste and
is applied only to equipment manufactured after
13 August 2005
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Features and specifications subject to change without notice.
Peavey Electronics Corporation
5022 Hartley Peavey Drive • Meridian, MS 39305
© 2007
80302568
Download from Www.Somanuals.com. All Manuals Search And Download.
|