OWNER'S MANUAL
Please Read the Manual First before Operation
PT588AB
5.1 Channel 420 Watts Built-In AM/FM Radio/
HDMI KARAOKE Receiver
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
For Customers
Thank you for purchasing the HDMI receiver. We strongly recommend that you carefully study the operating
instructions before attempting to operate the unit and that you note the listed safety information.
Caution
You are cautioned that changes or modifications not expressly approved in this manual could void your authority to
operate this equipment.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains and etc. Do
not place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects filled with liquid, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
Install this system so that the power cord can be unplugged from the wall socket immediately in the event of
trouble.
Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunlight or fire.
System Features
5.1 Channel Amplifier.
4 HDMI Input Port and 1 HDMI Output Port for HDMI Receiver and HDMI Switcher.
One Key Switch Function Between HDMI Receiver and HDMI Switcher.
Built-In AM/FM Radio.
B+T input.
2 MIC Input, Treble and Bass of MIC Adjustable, Independent MIC Volume Control.
Over Current Protection, Short Circuit Protection And Over Voltage Protection.
12 Preset Radio Station.
Full Remote Control.
VFD Display.
Power Input: AC 115V 60Hz/230V 50Hz;
Power Output: 300 Watts LR Channel (4 Ohm) 50W for Center, Surround L and Surround R(4 Ohm).
Inout Selector: 4 in 1 out HDMI Selector, 3 Stereo RCA Selector, 1AM/FM Radio, 1 B+T input, 3 Microphone Input.
Output: 5 Channel Speaker Output Terminal for L, R, Center, SL, SR, And 1 line Out for Subwoofer and 2 PRE out.
Total Power Consumption: 350W.
Front Panel Function
16
6
7
8
9
10 11 12
13 14 15
1
2
3
4
5
17
18
19
20
21
22
23
24
25
1.PRO selector.
2.Tuner band adjustment selector.
3.FM/AM input selector.
4.HDMI audio switch selector.
5.Tuner MO/ST audio output selector
6.HDMI input selector.
7.AUX input selector.
8.FM/AM input selector.
9.B+T input selector.
10.Treb Volume selector.
11.VFD display window.
12.Bass Volume selector.
13.DSP control selector.
14.Channel source output selector.
15.Mute control selector.
18.B+T Pairing selector.
19.Mic1 volume adjustment knob.
20.Delay selector.
21.Mic2 volume adjustment knob.
22.Mic input socket.
23.Mic treble adjustment knob.
24.Mic echo adjustment knob.
25.Mic bass adjustment knob.
16.Master volume adjustment knob.
17.Power on/off selector.
.1.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Display Window
Name
1.STEREO
Function
Light up when AUX, B+T,FM/AM, input.
AUX/TUNER/B+T/INPUT
2.AC-3 PROLOGIC
3.DSP
HDMI INPUT
DSP STATE ICON
Light up when 5.1 channel or HDMI input.
Light up when play DSP effect.
4.DIGITAL DISPLAY
5.KHz MHz
Light up to display value of current input mode.
Light up when tuner input is selected and indicates the
value on the display for KHz/MHz.
KHz MHz ICON
6.SPECTRUM DISPLAY
Light up to display the spectrum of different channel.
Real Panel Connectors
TV or video display
Power
Stereo input
DVD or HDMI source
Speaker system
Subwoofer
Side left
Front left
Front right Side right
Center
.2.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
1
2
1.Power on/off control selector
2.HDMI audio switch selector
3.Tuner band control selector
4.Tuner memory selector
5.Tuner mono/stereo audio output selector
6.Side left volume adjustment selector
7.Center volume adjustment selector
8.Treble volume increase selector
9.Left balance selector
10.Treble volume decrease selector
11.Bluetooth pairing selector
12.Delay time selector
3
15
16
4
5
17
18
13.Mic1 volume adjustment selector
14.Mic treble volume adjustment selector
15.Tuner number selector
6
19
20
7
8
21
16.Channel source output Selector(2.1CH,3.1CH,5.1CH,)
17.DSP control selector(live, hall, church)
18.Input mode selector
19.Side right volume adjustment selector
20.Subwoofer volume adjustment selector
21.Bass volume increase selector
22."Mute mode" control selector
23.Master volume control selector
24.Right balance selector
22
24
23
9
25
10
11
12
26
27
28
25.Bass volume decrease selector
26.Bluetooth pause selector
27.Bluetooth-skip selector
13
14
29
30
28.Mic ECHO adjustment selector
29.Mic2 volume adjustment selector
30.Mic Bass volume adjustment selector
Howto Pair the bluetooth receiver
The Amplifier have built in a bluetooth receiver. If you need to pair with a bluetooth sender(mobile phone), first
open the subwoofer, and press the “Pairing”key on the remote control, the VFD will show“ pairing ”and
flicker. Then search the bluetooth receiver(Device ID:HDKA-2100) by your own bluetooth sender and connect
themby the password:0000. After that, you can enjoy the music by the bluetooth receiver. The system will turn
to the normal working statue if no paring in 10 minutes.
Battery Installation
1.On the back of the remote control, push the tab and lift off the battery cover.
2.Obtain two (2) fully-charged AAA batteries. Match the "+" and "-" marks on the batteries to the "+" and "-"
marks in the battery case, then insert the new batteries.
3.Align the cover keys with the case holes and press the cover back into place. The tab should click when the
cover is locked.
4.Test the unit by pressing POWER or any mode key. If the batteries are inserted correctly, the selected mode
key will blink once.
Note
Do not leave the remote control in an extremely hot or humid place.
Do not use a new battery with old ones.
Do not mix manganese batteries with other kinds of batteries.
Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid
possible damage from battery leakage and corrosion.
.3.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Turn on/off the Power
Press "
" key to control the power on and off.
Master Volume Control
Press the "
" or "
" Key to adjust the main channel volume.
Side Left Channel Volume Control
Press "
" key, screen display the SL volume, press "-ADJUST+" key to adjust side left channel volume.
Side Right Channel Volume Control
Press "
" key, screen display the SR volume, press "-ADJUST+" key to adjust side right channel volume.
Center Channel Volume Control
Press "
" key, screen display the CEN volume, press "-ADJUST+" key to adjust center channel volume.
Subwoofer Volume Control
Press "
" key, screen display the SW volume, press "-ADJUST+" key to adjust subwoofer channel volume.
Mic1 Volume Control
Press "
" key, screen display the Mic1 volume, press "-ADJUST+" key to adjust Mic1 channel volume.
Mic2 Volume Control
Press "
" key, screen display the Mic2 volume, press "-ADJUST+" key to adjust Mic2 channel volume.
Mic TreB Control
Press "
" key, screen display the Mic TreB volume, press "-ADJUST+" key to adjust Mic TreB channel volume.
Mic Bass Control
Press "
" key, screen display the Mic Bass volume, press "-ADJUST+" key to adjust Mic Bass channel volume.
How to Adjust Treble
Press "
" key to adjust the treble output of the main channel.
How to Adjust Bass
Press "
" key to adjust the bass output of the main channel.
How to Play HDMI
Make sure HDMI connection lines are correct, Press the "
" key to play HDMI.
" key to play AUX.
How to Play AUX
Make sure AUX connection lines are correct, Press the "
How to Play B+T
1.Select B+T Input Mode
Make sure B+T card insert to the B+T socket, Press the "
2.B+T Control
" key to select B+T input mode.
"
": Control the B+T play.
"
"
": Control the B+T pause.
": Control the B+T skip.
Delay Control
Press " " key, screen display the Delay time, press "-ADJUST+" key to adjust Delay time.
How to Play Tuner
1.Select Program
Use "
" key to select FM/AM band. Press the " "key to adjust the band of tuner. Press the "
"key for 2
seconds, the FM will search automatically. You can press the "
"key once to stop the function.
2.Listen to the Preset Program
Press the number keys "
-
" to select the radio program that you already saved. Once selected, screen will
display the radio program's frequency in the memory area.
.4.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.Memory Program
When you receive a clear radio program, press the "
" key first, and then the screen displays the "Memory"
icon. Press one of the 12 "
-
" number key on the remote control to select the memory station. If you want
to extract the channel you saved, just press the number key you selected.
4.Memory Program
Press " " to select the radino monoor stereo seace.
How to Mute
Press "
" key to turn sound off/on.Press again to restore the audio to the original level.
Introduction of DSP Control Key
Press the key "
" repeatedly to switch to different operations: Live, Hall or Church. All the above functions can
give different sound effects.
Introduction of Source Output Selector Area
Press "
" key to receive 5.1 channel(default mode); Press "
" key to receive 3.1 channel(SL, SR mute); Press
"
" key to receive 2.1 channel(SL, SR, CEN mute).
Trouble Shooting
Use this chart to help you solve operational problems. If there are any problems that can not be solved,
please contact Service Center.
.5.
Download from Www.Somanuals.com. All Manuals Search And Download.
.6.
Download from Www.Somanuals.com. All Manuals Search And Download.
|