PYLE Audio Computer Monitor PLTV165 User Manual

PLTV165  
OWNER'S MANUAL  
Mobile Video System  
Vertical Adjustable And Horizontal Rotatable Panel  
TFT Monitor With TV Tuner  
Remote Control  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTION  
CAUTION:  
Please read and observe all warnings and  
instructions given in this owner's manual.  
Keep these instructions. Retain this  
booklet for future reference.  
Please read the following safety  
instructions carefully.  
1.This set has been designed and  
manufactured to assure personal  
safety. Improper use can result in  
electric shock or fire hazard. The  
safeguards incorporated in this unit  
protect you if you observe the following  
procedures for installation, use and  
servicing. This unit doesn't contain any  
parts that can be repaired by the user.  
2.The monitor is operated automatically.  
Do not draw the monitor out or turn it  
upward or downward manually.  
Otherwise, the mechanism  
construction may be harmed to some  
degree.  
3.When you operate the monitor with  
the remote handset, do not touch the  
monitor by your hands. It may harm  
your fingers.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
TAKE OUT SCREW BEFORE  
INSTALLATION  
Before install the unit, please remove  
Notes:  
Choose the mounting location where  
the unit will not interfere with the  
normal driving function of the driver.  
Before finally installing the unit,  
connect the wiring temporarily and  
make sure it is all connected up  
properly and the unit and the system  
work properly.  
the two screws on the back of the unit.  
Take out screw  
before installation.  
Use only the parts included with the  
unit to ensure proper installation. The  
use of unauthorized parts can cause  
Malfunctions.  
DIN FRONT-MOUNT (Method A)  
Consult with your nearest dealer if  
installation requires the drilling of  
holes or other modifications of the  
Vehicle.  
Installation Opening  
This unit can be installed in any  
dashboard having an opening as show  
below:  
Install the unit where it does not get  
in the driver's way and cannot injure  
the passenger if there is a sudden  
stop,like an emergency stop.  
If installation angle exceeds 30O from  
horizontal, the unit might not give its  
optimum performance.  
53mm  
182mm  
Installing the unit  
Be sure you test all connections first, and  
then follow these steps to install the unit.  
30  
1.  
Make sure the ignition is turned off,  
and then disconnect the cable from the  
vehicle battery's negative (-) terminal.  
Avoid installing the unit where it would  
be subject to high temperature, such  
as from direct sunlight, or from hot air,  
from the heater, or where it would be  
subject to dust, dirt or excessive  
vibration.  
2. Disconnect the wire harness and the  
Antenna.  
3. Lift the top of the outer trim ring then  
pull it out to remove it.  
4. The two supplied keys release tabs  
inside the unit's sleeve so you can  
remove it. One key is for the right side  
and the other is for the left side. Insert  
the keys as far as they will go (with the  
notches facing up) into the appropriate  
slots at the middle left and right sides  
of the unit. Then slide the sleeve off  
the back of the unit.  
DIN FRONT/REAR-MOUNT  
This unit be can properly installed either  
from "Front"(conventional DIN  
Front-mount) or "Rear"(DIN Rear-mount  
installation, utilizing threaded screw holes  
at the sides of the unit chassis). For  
details, refer to the following illustrated  
installation methods.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
(Tapping Screw (5x25mm) and Plain  
Washer) to attach the other end of  
metal strap to a solid metal part of the  
vehicle under the dashboard. This  
strap also helps ensure proper electrical  
grounding of the unit.  
Sleeve  
L Key  
Outer Trim Ring  
R Key  
Hex Nut  
Spring Washer  
Metal Strap  
5. Mount the sleeve by inserting the  
sleeve into the opening of the  
dashboard and bend open the tabs  
located around the sleeve with a  
screwdriver. Not all tabs will be able to  
make contact, so examine which ones  
will be most effective. Bending open  
the appropriate tabs behind the  
dashboard to secure the sleeve in  
place.  
Mounting Bolt  
Plain Washer  
Tapping Screw  
9. Reconnect the cable to the vehicle  
battery's negative (-) terminal. Then  
replace the out trim ring.  
Dashboard  
Tabs  
Removing the unit  
1. Make sure the ignition is turned off,  
then disconnect the cable from the  
vehicle battery's negative (-) terminal.  
Screwdriver  
Remove the metal strap attached the  
back of the unit (if attached).  
Lift the top of the outer trim ring then  
pull it out to remove it.  
2.  
any wires or cables.  
Sleeve  
3.  
6.  
Reconnect the wire harness and the  
antenna and be careful not to pinch  
any wires or cables.  
4. Insert both of the supplied keys into the  
slots at the middle left and right sides of  
the unit, then pull the unit out of the  
dashboard.  
7. Slide the unit into the sleeve until it  
Locks into place.  
8.  
To further secure the unit, use the  
supplied metal strap to secure the back  
of the unit in place. Use the supplied  
hardware (Hex Nut (5mm) and Spring  
Washer) to attach one end of the strap  
to the mounting bolt on the back of  
the unit. If necessary, bend the metal  
strap to fit your vehicle's mounting area.  
Then use the supplied hardware  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
DIN REAR-MOUNT (Method B)  
3
1
2
4
5
1. Factory radio mounting bracket  
2. Car radio mounting bracket  
3. Screw  
4. After aligning the car radio  
mounting bracket with the factory  
radio mounting bracket, tighten the  
screws (5x5mm) at 2 places on  
each side.  
5. When fix the factory radio  
mounting bracket with the screws,  
use s standard-tipped screwdriver  
to open the tabs of the car radio  
mounting bracket to make them fit  
into theholes in the factory radio  
mounting bracket.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELECTRICAL CONNECTION  
DC IN  
AV INPUT  
AV OUT  
TV ANT  
REMOTE  
To Diversity Antenna  
RGB SYSTEM  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
LOCATION AND FUNCTION OF KEYS  
7
1
2
3
4
5
6
9
8
10 11  
12  
13  
15  
14  
16  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
LOCATIONAND FUNCTION OF KEYS  
18  
17  
20  
19  
21  
22  
23  
26  
24  
28  
29  
27  
25  
30  
1. /I POWER  
2. OPEN/CLOSE  
3. IR  
17. POWER  
18. OPEN/CLOSE  
19. TV/AV  
4. AUDIO IN (AV1)  
5. VIDEO IN (AV1)  
6. 6.5 inch MULTI COLOR TFT  
MONITOR  
20. 0~9 Numeric buttons  
21. ANGLE+  
22. ANGLE-  
23. AUTO  
7. Reset  
24. VOLUME  
^
^
8. VOLUME  
25. VOLUME  
26. CHANNEL  
27. CHANNEL  
28. -/--  
9. VOLUME  
^
^
10. MENU  
11. TV/AV  
12. AUTO  
29. DSP  
13. IR  
30. MENU  
14. CHANNEL  
15. CHANNEL  
16. 4:3/16:9 Selector  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
SWITCHING ON/OFF THE UNIT  
Switch on the unit by pressing POWER  
button (1) on the front panel or POWER  
button (17) on the remote control. When  
system is on, press it again to turn the  
unit off.  
OPEN/CLOSE THE MONITOR AND  
ANGLE ADJUSTMENT  
Fig.3  
Return the monitor to the central  
viewing position, then press  
OPEN/CLOSE button (2) on the  
front panel or press OPEN/CLOSE  
button (18) on the remote control,  
the monitor will turn downward  
automatically.  
Press OPEN/CLOSE button (2) on the  
front panel or point the remote control  
to IR (3) on the front panel and press  
OPEN/CLOSE button (18), the  
monitor will stretch automatically.  
OPEN/CLOSE button  
Fig.1  
When the monitor stretches to a certain  
location, it will turn upward  
automatically and stop at vertical  
position.  
Fig.4  
When the monitor turns downward to a  
certain angle, it will draw in.  
Fig.5  
Fig.2  
REMOTE SENSOR  
Adjusting the viewing angle.  
There is a remote sensor IR (3) on the  
front panel. On the monitor, there is  
another remote sensor IR (13) to receive  
remote control signal. You can point the  
remote control handset to IR (3) (when  
the monitor doesn't stretch out) or IR (13)  
(when the monitor stretches out) and  
press function keys on the remote control  
to control the TV unit.  
The unit is also connected to an external  
remote receiver (See the electrical  
connection diagrams on Page 7), and the  
function is the same with IR (3) and (13).  
When the monitor doesn't move, you  
can press ANGLE+ button (21) or  
ANGLE button (22) on the remote  
control to turn the monitor upward or  
downward at fine steps to get a  
desired viewing angle. And you can  
rotate the monitor left and right from  
the central viewing position at a  
certain angle range manually.  
Don't rotate the monitor forcibly to  
avoid mechanical damage.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Press CHANNEL button (15) or  
CHANNEL (27) button on  
Notes:  
The external remote receiver is placed  
near the monitor for the best to receiver  
remote signal easily.  
If the angle of the monitor from vertical  
exceeds 200 (Especially the distance  
exceeds 3m.), controlling the TV  
through IR (3) or (13) cannot get good  
effect. You are suggested to use the  
external remote receiver.  
remote control to choose channel  
downward.  
The numeric buttons (0,1~9) (20)  
allow you to select the  
corresponding channel directly.  
Press digital select button (-/--) ()  
cooperatively used with numeric  
buttons to select channel desired.  
For example, when you want select  
16 channel, press -/-- (28) to switch  
between "-" and "--", when the "--"  
appears on the display, you can  
press "1" button then press "6"  
button to select 16 channel.  
6.5 inch TFT DISPLAY  
When the monitor stretches out, the 6.5  
inch color TFT display (6) can show the  
current state of the unit.  
RESET FUNCTION  
Reset button (7) must be activated with  
either a ballpoint pen or thin metal object.  
The reset button is to be activated for the  
following reasons:  
Menu Function  
Press MENU button (10) on the front  
panel or MENU button (30) on the  
remote control, the menu will show  
on the display (6).  
Initial installation of the unit when all  
wiring is completed.  
All the function buttons do not  
operate.  
Error symbol on the display.  
(For the unit with NTSC system):  
MENU  
Note: When the monitor stretches out and  
on the central viewing position, activate  
the reset button (7), the monitor will turn  
downward and draw in automatically.  
TV OPERATION  
When the monitor stretches out, you can  
operate the unit by using the current  
menu displayed on the 6.5 inch color TFT  
display (6).  
Press CHANNEL / (14&15) on  
^
the front panel or CHANNEL  
/
^
buttons (26&27) on the remote  
control to select the item upward or  
downward. Then press VOLUME /  
Selecting receiving mode  
In TV mode, press TV/AV button (11)  
on the monitor panel or TV/AV button  
(19) on the remote control to select  
among TV/ AV1/AV2/RGB. The  
corresponding state will show on the  
TFT display (5).  
(8&9) on the front panel or  
^
VOLUME / buttons (24&25) on  
^
the remote control to adjust the  
selected item. The corresponding  
value will show on the display.  
Selecting channel  
Press CHANNEL button (14)  
on the front panel or CHANNEL  
(26) button on remote control to  
choose channel upward and or  
^
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
Auto Searching channels  
Press AUTO button (12) on the  
monitor panel or AUTO button (23)  
on the remote control to enter into  
auto searching mode, then press  
CHANNEL button (14) on the  
monitor panel or CHANNEL button  
^
(26) on remote control t to start  
searching TV channels. Then press  
CHANNEL button (15) on the  
monitor panel for about one seconds  
or press CHANNEL button (27) on  
the remote control to stop searching.  
^
Volume adjustment  
Press VOLUME / buttons (8&9) or  
^
VOLUME  
adjust volume level.  
/
buttons (24&25) to  
^
Screen display  
Press DSP button (29) on remote  
control to display the current status  
such as TVch /AV1/AV2. If you don't  
operate for over 5 seconds, the  
information on the screen will  
disappear.  
4:3/16:9 Selector  
Slide the 4:3/16:9 switch (16) on the  
monitor panel to select appropriate  
TV aspect (4:3 or 16:9).  
SPECIFICATION  
GENERAL  
Power Supply Requirements:  
: DC 12 Volts, Negative Ground  
TV  
Monitor Screen Size  
Resolution  
TV Sensitivity  
: 6.5"TFT  
: 1440x234 dots  
: 40dB  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
88-T1990-02  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Breast Pump SCF332 User Manual
Philips Cordless Telephone DECT5113L User Manual
Philips Hair Clippers CC5060 User Manual
Philips MP3 Docking Station DS8500 12 User Manual
Philips Speaker System SPA3210 User Manual
Pitney Bowes All in One Printer DA950 User Manual
Polaroid Flat Panel Television FLM 3225 User Manual
Poulan Snow Blower 429896 User Manual
Power Acoustik Car Stereo System PA 360EQ User Manual
PVI Industries Water Heater Polymer Plated Storage Tank User Manual