User's Manual
MODEL NO.:PLDVCR600
PLDVCR500
view
In the initial settings, exclusive channel for DVD/Video is set to CH 3.
Set the TV channel to CH3 before using it.
◆
◆
Region code of DVD/Video player for home is 1 or ALL.
In inserting a disc with other region code, it does not operate.
Please only use a disc with region code 1 or ALL.
is a 'Prohibition' mark. If this mark is displayed in operating the product,
please wait for a while, then use it. If 'Prohibition' mark continues to be displayed
in pressing a button after that, it means the button does not
function in the currently played disc.
◆
Download from Www.Somanuals.com. All Manuals Search And Download.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following
procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts
that can be repaired by the user.
1 READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2 RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3 HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4 FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5 CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6 ATTACHMENTS
Do not use attachments unless recommended by the unit’s manufacturer as they may cause hazards.
7 WATER AND MOISTURE
Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool and the like. Caution : Maintain electrical safety. Powerline operated
equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the
accessory itself and should not be modified so as to defeat the safety features. This will help avoid any potential
hazard from electrical shock or fire. If in doubt, contact qualified service personnel.
8 ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The
unit may fall, causing serious injury to a child or adult as well as serious
damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or
table recommended by the manufacturer.
8A
A unit and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the unit and cart combination
to overturn.
9 VENTILATION
Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to
protect it from overheating. These openings must not be blocked or covered. These openings must not be
blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed
near or over a radiator or heat radiator. This unit should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been
adhered to.
10 POWER SOURCES
This unit should be operated only from the type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your dealer or local power company. For units
intended to operate from battery power, or other sources, refer to the operating instructions.
PORTABLE CART WARNING
(symbol provided by RETAC)
11 GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating -current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete
outlet.To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet
unless the blades can be fully inserted without blade exposure. If you need an extension cord, use a polarized
cord.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
12 POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they
exit from the unit.
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC which
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as practical.
13 Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product, be
sure the antenna or cable system is grounded so as to provide some
EXAMPLE OF ANTENNA
GROUNDING
ANTENNA LEAD
IN WIRE
protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code, ANSI/NFPA No. 70-1984
(Section 54 of Canadian Electrical Code, Part 1) provides information
with respect to proper grounding of the mast and supporting
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS
structure, grounding of the lead-in wire to an antenna-discharge unit,
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
NEC - NATIONAL ELECTRICAL CODE
connection to grounding electrodes, and requirements for the
grounding electrode. See example as shown.
14 Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with
them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna
installer.
15 LIGHTNING
For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to
the unit due to lightning and power line surges.
16 DISC TRAY
Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury.
17 OVERLOADING
Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock.
18 OBJECT AND LIQUID ENTRY
Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or
“short-out”parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.
19 BURDEN
Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and
serious damage to the product.
20 DISC
Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal
injury and product malfunction.
21 SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
22 DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions.
A. When the power-supply cord or plug is damaged.
B. If liquid has been spilled, or objects have fallen into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions. Improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the unit to
its normal operation.
E. If the unit has been dropped or the cabinet has been damaged.
F. When the unit exhibits a distinct change in performance-this indicates a need for service.
23 REPLACEMENT PARTS
When replacement parts are required, have the service technician verify that the replacements he uses
have the same safety characteristics as the original parts. Use of replacements specified by the unit
manufacturer can prevent fire, electric shock, or other hazards.
24 SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks
recommended by the manufacturer to determine that the unit is in safe operating condition.
25 WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
26 HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Read Carefully before Using
Cautions in use of DVD-Video player are described below.
Please read carefully before using a DVD-Video player.
Installation place and handling
◆
- When you place this player near other devices, they may affect poorly together.
- When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures
or failure (tape is not ejected).
- When you place this player near strong magnetic materials, it may affect image or voice poorly or damage
recording.
- Do not spill volatile liquids like insect spray over the player. Do not leave rubber or plastic products in contact
with the player for a long time. They will cause deterioration or paint peel-off.
◆
Not in use
- When the unit is not in use, be sure to remove the disc or tape and turn off the power.
- If you do not use the unit for a long period, remove batteries in REMOTE to prevent leakage.
- In case you don’t use the unit for a long time, the unit may not function properly in the future. Turn on and
use the player occasionally.
Moving
◆
◆
- Repack the unit as it was originally packed at the factory. Alternatively, pack this product with towel not to be
damaged.
- Eject any videotape.
Cleaning
- Dust off dirt in cabinet or control panel part smoothly with a soft cloth.
- For heavy dirt, soak the cloth in a weak detergent solution, wring it well and wipe. Use a dry cloth to wipe it
out.
- Follow instructions in using chemical cleaners.
- Do not use any type of solvent such as gasoline or benzene, as they may cause deterioration or paint peel-off.
◆
Checking
- Video is a high precision device. To obtain a clear screen, we recommend regular inspection and
maintenance every 1,000 hours of use by technical engineers.
- For checking, contact your dealer or your nearest service center.
Checking and Replacement of Antenna
◆
◆
- Antenna is subject to change in its direction or damage by wind and rain. For clean screen, contact and
consult your nearest service center about checking and replacement.
In recording important screen
- Be sure to record the screen and check whether recording is performed properly. We beg you to understand
compensation of recording if recording is not performed by badness of used tape or video.
Copyright
◆
- Do not use your recordings without permission of a copyrighter except personal usage.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
◆
Tape and Disc Handling
- Do not use any tape and disc below. Damage of video head or cut/coiling of tape may cause failure.
①Tape with mold
②Tape or disc stained with juice or attachments
③Tape having breakage connection
④Disassembled tape
⑤Disc with severe scratch
⑥Moisture condensation may occur in tape. Moisture condensation damages the tape. Please use the tape
after the moisture condensation is disappeared.
- After use, store tape vertically in a case to prevent loose.
- Do not store the following places.
①High temperature and humidity
②Subject generation of mold
③Subject to direct sunlight
④Much dirt or dust
⑤Near strong magnetic materials such as speaker
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important Safeguards
Read Carefully before Using
Advantages of This Product Are....
Idenificatuion of Controls
front palel
Other's Operation
1
29
29
29
30
30
30
31
31
32
33
34
34
34
34
35
35
35
35
36
37
38
40
40
41
Using a zoom function
Anglr
5
8
To skip chapter in a DVD
To Play It Fast
9
9
rear panel
To Play It Slow
11
12
13
14
15
16
18
18
18
19
20
20
20
21
22
22
22
23
24
24
24
25
25
25
26
26
26
27
28
28
28
remote Controller
Repeating a Defined Period
Confirming The Current Disc Mode
To Display Menus In a Disc
Repeating a Defined Period (DVD)
About VCR
instructions in using remote
Connecting with TV
Connecting with Cable box
Connecting with other vcr or camcorder
Language Setup Manu
Select Manu Language
Select Audio Language
Select Subtitle Language
Display setup Manu
Set TV Display Mode
Set TV Type
Video Head Cleaning
Erasure Protection
What is Dew Condensation System
About DVD
Playable Disc
Handling Disc
Cleaning Disc
Set Plcture Mode
Terms related with DVD
Before Doubting about troubles (DVD)
Before Doubting about troubles (VCR)
Specifications
Audio setup Manu
DigitalSETUP
Dual mono (1+1) setup
Dynamic Range compression setup
Parental Lock Setup Manu
Parent Lock Setup
VCR Part
DVD Part
Change Password
Others Setup Menu
FM Transmitter
Screen Saver
VCR Setup Manu
VCR OSD (One Screen Display)
VCR Auto Play
VCR Auto Repeat
Operating TV Tuner
TV Channel Set
CATV Channel Set
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Advantages of This Product Are .....
◆BUILT-IN TV TUNER (TV/CATV)
◆Hi-Fi stereo system [VCR]
◆Digital Auto Tracking [VCR]
◆BACK LIGHTING OF FUNCTION BUTTONS
◆EXTERNAL IR REMOTE CONTROLLER WITH RECEIVER
◆DEW & HEAT SENSORS FOR TAPE PROTECTION
◆AUTO START FUNCTION
◆DC power Supply (2 kind of DC 12v inputs)
◆DVD, VCD, CD, CD-R(MP3), CD-RW, VHS playback function
◆Watching DVD for recording broadcast
◆Integrated REMOTE (VCR, DVD)
◆MP3 file playback function (CD-R disc having records of MP3 files)
◆Various video type-supported ( NTSC and PAL)
◆GUI (Graphical User Interface) OSD (On Screen Display)
◆Screensaver function [DVD]
◆Slow Forward / reverse (DVD) playback
◆Fast Forward / reverse playback
◆Various TV aspect (DVD)
- 4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9 for Wide
◆Repeat playback (title and chapter for DVD, track and disc for VCD/CD)
◆Selective Play (DVD/VCD/CD)
- You can select and play the desired title / chapter of DVD and track of Video CD/CD in STOP mode.
◆Screen zoom function (DVD/VCD)
◆Parental Lock function (DVD)
- This function can prevent playback of software that may be unsuitable for children.
◆Multi Angle function (DVD)
- This function allows you to choose the viewing angle of scenes which were shot from a number
of different angles. (The number of angles depends on the software.)
◆Built-in Dolby Digital decoder (DVD)
◆Multi Subtitle function (DVD)
- The subtitle can be seen in up to 8 languages. In the case of SVCD or CVD, it depends on the disc. (The
number of subtitle languages depends on the software.)
◆Multi Audio function (DVD)
- The audio soundtrack can be heard in up to 8 languages. In the case of SVCD or CVD,
it depends on the disc.(The number of audio languages depends on the software.)
◆Composite video out
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Front Panel
⑥
⑨
⑦
⑧
⑤
③
④
②
①
OPEN/CLOSE
⑩
⑪
⑬
⑮
⑭
⑫
Open/Close button
①
②
⑩
Audio/Video in jack
Connect these jack to the audio/video out jacks
terminal of your game machine or camcorder using
the RCA cord provided.
If this key is pressed while power is supplying .
disc tray will open,the open/close button lamp will
light up in red then insert the disc and
the disc will be played automatically
⑪
⑫
Remote control receiver.
Playback/Pause button(DVD)
Autorepeat lamp
Playback disc press this button to pause a screen
the pause lamp will blink in pause mode
During auto repeat operation,
auto repeat lamp will light up in red.
⑬
⑭
Stop button(DVD)
Use to stop playing
HI-FI Lamp
③
④
In the Hi-Fi out mode, the lamp will light up in red
DEW/HEAT lamp
Disc tray
When power is on, tis indicator flashes red to
indicate excessive moisture buildup inside the VCR.
The unit will not operate unit it dries out sufficiently
(the tape can be ejected from the unit)
⑤
⑥
⑦
DVD Disc lamp
VCD Disc lamp
CD/MP3 Disc lamp
When DEW mode has been activated,
Fast forward button
leave the unit on the allow it to dry out completely.
⑧
/ the former track select button
Press to select the former track or to
playback rapidly when the disc is to playback
rapidly, the fast forward button
will light up in red
⑮
REC key
Press the REc key for at least one second to
start recording.
Fast forward/Cue key
It this key is pressed in the Playback mode,
the VCRenters the forward picture search mode.
If pressed in stop mode,the the tape will fast
forward at hig speed. The FF indicator lamp will
up in red.
Rewind button
/ the next track select button
⑨
Press to select the next track or to
playback back rapidly when the disc is to playback
back rapidly, the rewind button will light up in red
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Play key.
Cassette-In Lamp.
Press this key to playback a recorded tape,
or to release special operation such as the search mode.
In the playback mode the playback indicator lamp will
be light in red, and Auto Tracking mode,
this indicator lamp will blink.
When the cassette is inserted,
the CST-IN lamp will light up in green.
Power Key
When power is supplied to the set,
the power indicator lamp will always light up in red.
The Power ON and Power OFF mode will be toggled
by pressing this key.
When the POWER is switched on,
the power lamp will light up in red the other keys will
light up in green.
Rewind / Review key.
If this key is pressed in the PLAYBACK mode,
the VCR enters the reverse picture search mode.
If pressed in STOP mode,
then the tape will rewind at high speed.
The REW indicator lamp will up in red.
Stop key.
Press this button to stop tape.
Cassette Compartment
Eject Key.
Press this button to eject tape.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
⑨
⑦
⑩
⑧
⑥
⑤
④
①
②
③
④
ANT IN Connector.
Connect the TV antenna
(or cable if available- home use) to this
connector.
DC JACK IN (DC 12V)
①
②
For car using, we recommend to use this connector
with 3-wire system.
* Connector description for 4
RF OUT Connector.
This connectors provides an interface
ACC 12V
to the antenna input connectors terminal of your
television using a coaxial cable.
Tuner the television to channel 3 or 4
to watch video tapes.
VEHICLE BATTERY 12V
GND
⑤
⑥
IR INPUT
Connect this terminal to remote control out.
DIGITAL OUT Connecter
③
DC 12V IN JACK ( Round type)
To enjoy sound quality of theater lev el in home,
connect this jac k with amp or unit embedded with
digital audio decoder
To use this connector, below Convert-Adapter
accessory should be locked into above connector 4.
⑦
AUDIO IN (AV1)
Connector this terminal to AUDIO OUT terminal of your
Game machine, Camcorder, using the RCA cord
For displaying this Rear A/V input connected, Input
Signal should be set to "AV1" in Menu setting mode.
( Convert-Adapter)
S/W OUT Connector
⑧
* Please note :
Connect this terminal to VIDEO IN terminal of your TV
, using the RCA cord .
We highly recommend to connect the unit
corresponding to the 3-wire system of 4.
Thus, to make sure a proper working
of power-off tape guide.
⑨
DVD OUT Connector.
Beyond it, the unit will automatically change
to standby mode after turning off the vehicle in
order to save the car battery.
Connect this terminal to VIDEO IN terminal of your TV
, using the RCA cord .
⑩
VIDEO OUT Connector.
Caution : Make use of AC/DC Adaptor
( Ripple Voltage: Max 500mV)
Connect this terminal to VIDEO IN terminal of your TV
, using the RCA cord .
11
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROLLER
1
2
DVD & VCR Power On/Off
46
45
REPEAT Playback button [DVD]
MENU button
3
4
5
6
TITLE MENU button
MOVE in OSD button
A/V SEL button
POWER
OPEN/CLOSE
44
1
ANGLE
SUBTITLE
ZOOM
AUDIO
REPEAT
MENU
7
8
OSD DISPLAY button
RETURN button
2
3
43
REPEAT A-B
TOP MENU
42
41
9
CLEAR button
10
11
PROGRAM button
MUTE button
4
5
ENTER
40
39
12
13
14
GOTO button
PBC button
A/V SEL.
RETURN
SETUP
6
7
8
FF button
DISPLAY
15
16
F.SKIP button
2
5
8
3
6
9
1
CH3/CH4 button [VCR]
EJECT button [VCR]
Auto Search button [VCR]
FF button [VCR]
CLEAR
17
18
19
20
4
7
9
38
PROGRAM
10
11
MUTE
GOTO
0
SLOW
STEP
PBC
STOP button [VCR]
AUDIO button [VCR]
REC button [VCR]
REPLAY button [VCR]
37
12
21
22
13
36
35
34
33
REW
PLAY/PAUSE
STOP
FF
14
R.SKIP
F.SKIP
23
24
15
CH3/CH4
EJECT
32
Tracking - (ManuallyaTracking in playback mode)
/Channel - (in TV or CATV mode)button [VCR]
16
17
VCR
TV/VCR
A. SEARCH
25
Tracking + (ManuallyaTracking in playback mode)
/Channel + (in TV or CATV mode)button [VCR]
31
18
REW
PLAY
STOP
FF
30
29
28
19
21
22
26
27
28
RE-Tracking button [VCR]
Encore button [VCR]
Pause/Still button [VCR]
Playback button [VCR]
Rewind button [VCR]
TV /VCR button [VCR]
STOP button [DVD]
AUDIO
PAUSE/STILL
ENCORE
REPLAY
20
--- TRK ---
REC
R.TRK
27
+
-
--- CH ---
29
23
30
31
32
33
34
R.SKIP button [DVD]
Play/Pause button [DVD]
Rewind button [DVD]
Step button [DVD]
24
26
25
35
36
37
38
42
Slow button [DVD]
Number button [DVD]
Setup button [DVD]
Enter button [DVD]
Zoom button [DVD]
Repeat A-B button [DVD]
43
Angle button [DVD]
44
39
40
Open/Close button [DVD]
45
Subtitle button [DVD]
41
46
Audio button [DVD]
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions in Using REMOTE
Operate REMOTE within 7m
from the unit.
▶
▶
Do not keep in the place with
much dust and humidity
▶
Do not light up sending part of
REMOTE
Do not press 2(two) buttons at
the same time.
▶
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting with TV
■
In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in
“CHANNEL SET”screen in VCR operation.
In connecting RF cable to TV, set TV channel to CH3.
■
How to Connect with RF cable
REAR PANEL OF DVD-VIDEO
REAR PANEL OF TV
INPUT 1 INPUT 2
OUTSIDE ANTENNA OR
WALL ANTENNA OUTLET
ANT IN
RF CABLE
1. Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN”Jack in rear panel of TV. Connect the
cable to “ANT.IN”jack in rear panel of DVD-Video.
2. Connect TV to DVD-Video. Connect “RF OUT”jack in DVD-Video with “ANT.IN”jack in TV with RF cable.
REAR PANEL OF TV
INPUT 1 INPUT 2
ANT IN
REAR PANEL OF DVD-VIDEO
AUDIO/VIDEO CABLE
3. (If there is AUDIO/VIDEO INPUT jack in TV)
Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to
AUDIO IN jack in TV with connecting cable of Audio/Video jack.
Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound than
connection with RF cable only.
CHECK UP!
VHF: 2 ~13 channels of TV
UHF: 14~69 channels of TV
CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and
consumers. It does not need any antenna.
In/Out jack in Audio/Video terminal:
- In: A jack used to receive signal required in this unit from other units.
- Out: A jack used to send signal of this unit to other units.
Connect with Audio/Video terminal, you can enjoy more clear video and audio.
(Use OUTPUT button in this REMOTE to select video mode.)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting with Cable Box
If your cable system only requires you to use a converter box for some channels
(i.e., pay-TV channels), follow these steps: Find the primary incoming RF cable.
Plug this cable into a splitter (available at your local electronics store.)
Connect one RF cable between one OUT terminal on the splitter and the IN terminal on the converter box.
Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal
on an A/B switch available at your local electronics store.)Connect a third RF cable between
the OUT terminal on the converter box and the B-IN terminal on the A/B switch.
Connect a RF cable between the OUTterminalon the A/B switch and the ANT. IN on your DVD-VIDEO.
When the A/B switch is in the B position,use the converter box to change channels ; when the A/B switch is
in the A position, use the DVD-VIDEO to change channels.
How to watch general broadcasting with recording CATV
1. Set Channel Select switch of Converter Box to CH 3 or 4 as same as video
exclusive channel. Press [SET] button in [VCR] operation to set video exclusive channel
in “CHANNEL SET”screen.
2. Press channel button of Converter Box to select channel to be recorded. In this case,
if you want to watch CATV to be recorded, press [TV/INPUT] button of TV to select “Out(VCR)”.
3. Press [REC] button in DVD-Video.
4. To watch general broadcasting, press channel button in TV to select the desired channel.
CHECK UP!
For some types of TV, you should press [TV/INPUT] button in TV REMOTE and convert from Out 1
( VCR 1) or Out 2(VCR 2) mode to Broadcasting Channel mode to change TV channel.
Change channel selection of CATV receiver in recording, contents of recording is changed.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting with Other VCR or Camcorder
1. Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack
in rear panel (or front panel) of DVD-Video with connecting cable.
2. Connect “ANT. IN”jack in TV to “RF.OUT”jack in DVD-Video with RF cable.
3. To record contents of camcorder or playback video with DVD-Video, insert recording
tape attached recording tab in DVD-Video.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Copy(Edit) Tape with Other VCR or Camcorder
1. Turn on DVD-Video.
2. Press [OUTPUT] button of remote control and adjust DVD-Video to display
"External Input 1" or "External Input 2" in TV screen.
3. Press [PLAY] button in Camcorder or playback video.
4. Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video.
5. Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.
(Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button.
Press [REC] button if you want to record again.
How to Playback Chapter Photographed by Camcorder
1. Turn DVD-Video on.
2. Press [OUTPUT] button of remote control and adjust DVD-Video to display “External Input 1”
or “External Input 2”in TV screen.
3. Insert tape in camcorder and playback it.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE SETUP MENU
Select DISC Menu Language
Select AUDIO Language
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
SETUPM MENU
T
T
LANGUAGE SETUP
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
EXIT SETUP
LANGUAGE SETUP
LANGUAGE SETUP
2. Press the select(ENTER) button
2. Press the select(ENTER) button.
then the LANGUAGE SETUP MENU is displayed.
then the LANGUAGE SETUP menu is displayed.
LANGUAGE SETUP MENU
LANGUAGE SETUP MENU
DISC MENU
AUDIO
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
DISC MENU
AUDIO
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
T
SUBTITLE
T
SUBTITLE
MAIN MENU
MAIN MENU
LANGUAGE SETUP
LANGUAGE SETUP
3. Press the SHIFT button to select(ENTER) the
"AUDIO", then the AUDIO menu is displayed.
3. Press the SHIFT
button
to enter the selected menu.
LANGUAGE SETUP MENU
DISC MENU
LANGUAGE SETUP MENU
DISC MENU
AUDIO
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
AUDIO
ENGLISH
T
SUBTITLE
T
SUBTITLE
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
MAIN MENU
MAIN MENU
LANGUAGE SETUP
LANGUAGE SETUP
4. Press the SHIFT
button.
4. Press the SHIFT ( or SHIFT ) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected.
LANGUAGE SETUP MENU
DISC MENU
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
AUDIO
T
SUBTITLE
italiano)
( English
francais
deutsch
espanol
LANGUAGE SETUP MENU
DISC MENU
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
MAIN MENU
AUDIO
LANGUAGE SETUP
T
SUBTITLE
5. Press the SHIFT ( or SHIFT ) button
unit for the appropriate system is selected.
and Press the ENTER button to activate the
selected.
MAIN MENU
LANGUAGE SETUP
( English
francais
deutsch
espanol
italiano)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Select SUBTITLE Language
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
LANGUAGE SETUP
2. Press the select(ENTER) button
then the "LANGUAGE SETUP" is displayed.
LANGUAGE SETUP MENU
DISC MENU
AUDIO
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
T
SUBTITLE
MAIN MENU
LANGUAGE SETUP
3. Press the SHIFT ▼button to select (ENTER)
the "SUBTITLE".
Then the SUBTITLE menu is displayed.
LANGUAGE SETUP MENU
DISC MENU
AUDIO
T
SUBTITLE
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
OFF
MAIN MENU
LANGUAGE SETUP
4. Press the SHIFT ▶ button
to enter the selected menu.
5. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected.
and Press the ENTER button to activate the selected menu.
( English →francais →deutsch →espanol →italiano →OFF )
LANGUAGE SETUP MENU
DISC MENU
AUDIO
T
SUBTITLE
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
OFF
MAIN MENU
LANGUAGE SETUP
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY SETUP MENU
Set TV TYPE
Set TV DISPLAY Mode
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
SETUPM MENU
T
T
T
T
LANGUAGE SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
DISPLAY SETUP
AUDIO SETUP
?
?
PARENTAL SETUP
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
EXIT SETUP
LANGUAGE SETUP
LANGUAGE SETUP
2. Press the SHIFT ▼button to select (ENTER)
the "DISPLAY SETUP".
2. Press the SHIFT ▼button to select (ENTER)
the "DISPLAY SETUP".
Then the DISPLAY SETUP menu is displayed.
Then the DISPLAY SETUP menu is displayed.
SETUPM MENU
SETUPM MENU
T
T
T
T
LANGUAGE SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
DISPLAY SETUP
AUDIO SETUP
?
?
PARENTAL SETUP
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
EXIT SETUP
GOTO DISPLAY SETUP MENU
GOTO DISPLAY SETUP MENU
3.Press the SHIFT ▼button to select (ENTER)
3. Press the SHIFT ▶ button to enter
the "TV TYPE".
the selected menu.
DISPLAY SETUP MENU
TV DISPLAY
4. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu.
MULTI
NTSC
PAL
TV TYPE
PIC MODE
( 4:3 LETTER BOX →4:3 PAN-SCAN →16:9 WIDE )
MAIN MENU
DISPLAY SETUP MENU
SET MULTISYNC MODE
TV DISPLAY
TV TYPE
4:3 LETTER BOX
4:3 PAN-SCAN
16:9 WIDE
PIC MODE
4. Press the SHIFT ▶ button to enter
the selected menu.
MAIN MENU
5. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu
( MULTI →NTSC →PAL )
SELECT 4:3 NORMAL TV L-BOX
DISPLAY SETUP MENU
TV DISPLAY
MULTI
NTSC
PAL
TV TYPE
PIC MODE
MAIN MENU
SELECT NTSC TV
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Picture Mode
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
LANGUAGE SETUP
2. Press the SHIFT ▼button to select (ENTER)
the "DISPLAY SETUP".
Then the DISPLAY SETUP menu is displayed.
SETUPM MENU
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
GOTO DISPLAY SETUP MENU
3. Press the SHIFT ▼button to select (ENTER)
the "PIC MODE".
DISPLAY SETUP MENU
TV DISPLAY
TV TYPE
PIC MODE
AUTO
HI-RES
N-FLICKER
MAIN MENU
SET PICTURE MODE
4. Press the SHIFT ▶ button
to enter the selected menu.
5. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu.
( AUTO →HI-RES →N-FLICKER )
DISPLAY SETUP MENU
TV DISPLAY
TV TYPE
PIC MODE
AUTO
HI-RES
N-FLICKER
MAIN MENU
SELECT HIGH-RESOLUTION MODE
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO SETUP MENU
DIGITAL OUT Setup
DUAL MONO (1+1) Setup
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
SETUPM MENU
T
T
T
LANGUAGE SETUP
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
EXIT SETUP
LANGUAGE SETUP
LANGUAGE SETUP
2. Press the SHIFT ▼button to select (ENTER)
the "AUDIO SETUP".
Then the AUDIO SETUP menu is displayed.
2. Press the SHIFT ▼button to select (ENTER)
the "AUDIO SETUP".
Then the AUDIO SETUP menu is displayed.
SETUPM MENU
T
T
LANGUAGE SETUP
SETUPM MENU
DISPLAY SETUP
AUDIO SETUP
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
GOTO DISPLAY SETUP MENU
EXIT SETUP
GOTO DISPLAY SETUP MENU
3. Press the SHIFT ▶ button to enter the selected
menu.
3. Press the SHIFT ▼button to select (ENTER)
the "AC3 DUAL MONO".
4. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected.
and Press the ENTER button to activate the
selected menu.
AUDIO SET MENU
DIGITAL OUT
STEREO
L-MONO
R-MONO
MIX-MONO
AC3 DUAL MONO
AC3 DYNAMIC
( DISABLE →BITSTREAM →PCM )
AUDIO SET MENU
MAIN MENU
DIGITAL OUT
DISABLE
BITSTREAM
PCM
DUAL MONO (1+1) SETUP
AC3 DUAL MONO
AC3 DYNAMIC
4. Press the SHIFT ▶ button to enter the
selected menu.
MAIN MENU
5. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu.
( STEREO →L-MONO →R-MONO →MIX-MONO)
SELECT DIGITAL OUT DISABLE
AUDIO SET MENU
DIGITAL OUT
STEREO
L-MONO
R-MONO
MIX-MONO
AC3 DUAL MONO
AC3 DYNAMIC
MAIN MENU
SELECT STEREO MODE
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup DYNAMIC Range Compression
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
LANGUAGE SETUP
2. Press the SHIFT ▼button to select (ENTER)
the "AUDIO SETUP".
Then the AUDIO SETUP menu is displayed.
SETUPM MENU
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
GOTO DISPLAY SETUP MENU
3. Press the SHIFT ▼button to select (ENTER)
the "AC3 DYNAMIC".
AUDIO SET MENU
FLL
DIGITAL OUT
AC3 DUAL MONO
6/8
AC3 DYNAMIC
4/8
2/8
MAIN MENU
OFF
DYNAMIC RENGE COMPRESSION
4. Press the SHIFT ▶ button to enter the
selected menu
5. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu.
AUDIO SET MENU
FLL
DIGITAL OUT
AC3 DUAL MONO
6/8
AC3 DYNAMIC
4/8
2/8
MAIN MENU
OFF
DYNAMIC RNG COMPRESSION 1/4
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL LOCK SETUP MENU
Change the Password
Setup Parental Lock
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
T
T
SETUPM MENU
LANGUAGE SETUP
T
T
DISPLAY SETUP
AUDIO SETUP
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
?
OTHERS SETUP
VCR SETUP
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
EXIT SETUP
LANGUAGE SETUP
LANGUAGE SETUP
2. Press the SHIFT ▼button to select (ENTER)
the "PARENTAL LOCK".
Then the PARENTAL LOCK menu is displayed.
2. Press the SHIFT ▼button to select (ENTER)
the "PARENTAL LOCK".
SETUPM MENU
Then the PARENTAL LOCK menu is displayed.
T
T
LANGUAGE SETUP
SETUPM MENU
DISPLAY SETUP
AUDIO SETUP
T
T
LANGUAGE SETUP
?
DISPLAY SETUP
AUDIO SETUP
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
GOTO DISPLAY LOCK MENU
EXIT SETUP
GOTO DISPLAY LOCK MENU
3. Press the SHIFT ▼button to select (ENTER)
the "PASSWORD".
PARENTAL LOCK MENU
3. Press the SHIFT ▶ button to enter
PARENTAL
1 KID SAFE
2 G
?
the selected menu
PASSWORD
3 PG
4. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected.
4 PG 13
5 PG-R
6 R
( KID SAFE →G →PG →PG 13 →PG -R →
R →NC-17 →ADULT )
7 NC-17
8 ADULT
MAIN MENU
SET TO KIDS SAFE
Then the PARENTAL VERIFY PAGE menu is displayed.
4. Press the SHIFT ▶ button to enter the
PARENTAL LOCK MENU
selected menu.
PARENTAL
1 KID SAFE
2 G
?
PASSWORD
PARENTAL LOCK MENU
3 PG
PARENTAL
?
4 PG 13
5 PG-R
6 R
PASSWORD
CHANGE
7 NC-17
8 ADULT
MAIN MENU
SET TO KIDS SAFE
MAIN MENU
CHANGE PASSWORD
5. If selecting “PARENTAL”by moving, a password
display appears.
Then entering a user’s password, a user canresettle
a user’s PARENTAL.
5. If selecting “CHANGE”by moving,
a password display appears.
Then entering a user’s password,
a user canresettle a user’s password.
PASSWORD VERIFY PAGE
INPUT PASSWORD :
PASSWORD CHANGE PAGE
OLD PASSWORD :
NEW PASSWORD :
CONFIRM PWD :
PLEASE ENTER PASSWORD
PLEASE ENTER OLD PASSWORD
24
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS SETUP MENU
Screen Saver
Setup the FM Transmitter
※ Option Function
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
SETUPM MENU
T
T
LANGUAGE SETUP
?
PARENTAL SETUP
DISPLAY SETUP
AUDIO SETUP
OTHERS SETUP
VCR SETUP
?
PARENTAL SETUP
EXIT SETUP
OTHERS SETUP
VCR SETUP
LANGUAGE SETUP
EXIT SETUP
2. Press the SHIFT ▼button to select (ENTER)
the "OTHERS SETUP".
LANGUAGE SETUP
Then the OTHERS SETUP menu is displayed.
OTHERS LOCK MENU
2. Press the SHIFT ▼button to select (ENTER)
the "OTHERS SETUP".
Then the OTHERS SETUP menu is displayed.
FM TRANSMITTER
SCR SAVER
88.1 MHz
88.3 MHz
88.5 MHz
88.7 MHz
88.9 MHz
89.1 MHz
89.3 MHz
89.5 MHz
89.7 MHz
89.9 MHz
off
OTHERS LOCK MENU
FM TRANSMITTER
SCR SAVER
88.1 MHz
88.3 MHz
88.5 MHz
88.7 MHz
88.9 MHz
89.1 MHz
89.3 MHz
89.5 MHz
89.7 MHz
89.9 MHz
off
MAIN MENU
OTHERS SETUP
3. Press the SHIFT ▼button select (ENTER)
the "SCR SAVER".
Then the SCREEN SAVER menu is displayed.
MAIN MENU
OTHERS SETUP
OTHERS LOCK MENU
FM TRANSMITTER
ON
3. Press the SHIFT ▶ button to enter the
selected menu.
SCR SAVER
OFF
4. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu.
( 88.1MHz →88.3MHz →88.5MHz →88.7MHz→
88.9MHz →89.1MHz →89.3MHz →89.5MHz
→89.7MHz →89.9MHz →off )
MAIN MENU
SELECT SCREEN SAVER ON
4. Press the SHIFT ▶ button to enter the
selected menu.
5. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu.
( "ON" or "OFF")
OTHERS LOCK MENU
FM TRANSMITTER
SCR SAVER
88.1 MHz
88.3 MHz
88.5 MHz
88.7 MHz
88.9 MHz
89.1 MHz
89.3 MHz
89.5 MHz
89.7 MHz
89.9 MHz
off
OTHERS LOCK MENU
FM TRANSMITTER
ON
SCR SAVER
OFF
MAIN MENU
OTHERS SETUP
MAIN MENU
SELECT SCREEN SAVER ON
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR SETUP MENU
VCR Auto PLAY
VCR OSD (On Screen Display)
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
T
T
LANGUAGE SETUP
SETUPM MENU
DISPLAY SETUP
AUDIO SETUP
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
LANGUAGE SETUP
EXIT SETUP
LANGUAGE SETUP
2. Press the SHIFT ▼button to select the
"VCR SETUP",
2. Press the SHIFT ▼button to select(ENTER) the
"VCR SETUP",
then the VCR SETUP menu is displayed.
then the VCR SETUP menu is displayed.
SETUPM MENU
T
T
LANGUAGE SETUP
VCR SETUP
DISPLAY SETUP
AUDIO SETUP
OSD
ON
▶
AUTO PLAY
AUTO REPEAT
OFF
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
MAIN MENU
EXIT SETUP
GOTO VCR SETUP MENU
VCR SETUP
3. Press the SHIFT ▼button to select the
"AUTO PLAY", then the AUTO PLAY menu is
displayed.
3. Press the SHIFT ▶ button to enter the
selected menu.
VCR SETUP
OSD
ON
▶
AUTO PLAY
AUTO REPEAT
OFF
4. Press select ENTER button unit for the
appropriate system is selected.
and Press the ENTER button to activate the
selected menu.
MAIN MENU
( "ON" or "OFF")
VCR SETUP
VCR SETUP
OSD
ON
4. Press the SHIFT ▶ button to enter the
▶
AUTO PLAY
AUTO REPEAT
OFF
selected menu.
5. Press select ENTER button unit for the
appropriate system is selected.and Press the
ENTER button to activate the
selected menu.
MAIN MENU
SELECT VCR OSD ON
( "ON" or "OFF")
VCR SETUP
OSD
ON
AUTO PLAY
▶
OFF
AUTO REPEAT
MAIN MENU
VCR OSD
26
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Auto Repeat
1. Press the "SETUP" button on the remote control.
The initial MENU is displayd.
SETUPM MENU
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
LANGUAGE SETUP
2. Press the SHIFT ▼button to select(ENTER) the
"VCR SETUP",
then the VCR SETUP menu is displayed.
SETUPM MENU
T
T
LANGUAGE SETUP
DISPLAY SETUP
AUDIO SETUP
?
PARENTAL SETUP
OTHERS SETUP
VCR SETUP
EXIT SETUP
GOTO VCR SETUP MENU
3. Press the SHIFT ▼button to select(ENTER) the
"AUTO REPEAT",
then the AUTO PLAY menu is displayed.
VCR SETUP
OSD
ON
▶
AUTO PLAY
AUTO REPEAT
OFF
MAIN MENU
VCR OSD
4. Press the SHIFT ▶ button to enter the
selected menu.
5. Press the SHIFT ▼( or SHIFT ▲) button unit for the
appropriate system is selected. and Press the
ENTER button to activate the selected menu.
( "ON" or "OFF")
VCR SETUP
OSD
AUTO PLAY
AUTO REPEAT
ON
▶
OFF
MAIN MENU
SELECT VCR AUTO REPEAT OFF
27
Download from Www.Somanuals.com. All Manuals Search And Download.
(Option Function)
OPERATING TV TUNER
TV CHANNEL SET
※NOTE : If RF-Sigmal is not input, searching channel will be displayed blue-back picture.
2. Press A.SEARCH button on the remote control,
then channels will be found and stored automatically.
1. Press "A/V SEL." button on the remote control,
until " TV" is selected.
While the "AUTO SEARCHING" is progressing,
channels will be changed up to 69.
(DVD ▶ TV ▶ CATV ▶ AV1 ▶ AV2)
TV 02
TV CHANNEL SET
CH **
AUTO
SEARCHING...............
3. When searching and storing is completed,
the TV mode will be displayed.
※NOTE:
While searching and storing channels, no button will be operated.
When "AUTO REPAT" function is "OFF" and VCR is "STOP" mode, this function will be operated.
CATV CHANNEL SET
※NOTE : If RF-Sigmal is not input, searching channel will be displayed blue-back picture.
1. Press "A/V SEL." button on the remote control,
until " CATV" is selected.
2. Press A.SEARCH button on the remote control,
then channels will be found and stored automatically.
While the "AUTO SEARCHING" is progressing,
channels will be changed up to 125.
(DVD ▶ TV ▶ CATV ▶ AV1 ▶ AV2)
CATV CHANNEL SET
CH **
CATV 01
AUTO
SEARCHING...............
3. When searching and storing is completed,
the CATV mode will be displayed.
※NOTE:
While searching and storing channels, no button will be operated.
When "AUTO REPAT" function is "OFF" and VCR is "STOP" mode, this function will be operated.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Other's Operation
Using a zoom function
A user can enlarge the current screen about 2,4 or 8 times.
Keep pressing [ZOOM] button till the preferred zoom appears.
Every time a user presses [ZOOM] button,
a zoom magnification changes 2 times ( X2 ) →4 times ( X4 ) →8 times ( X8 )
→OFF →2 times ( X2 ) ... one by one.
A base point to be enlarged is center and the point can be changed with
the operation of [◀ , ▶ , ▲, ▼] button.
ZOOM X2
POWER
OPEN/CLOSE
ANGLE
SUBTITLE
ZOOM
AUDIO
REPEAT
MENU
REPEAT A-B
TOP MENU
Zoom button
ENTER
When “TV ASPECT”item is set to “4:3 PS”in setup screen, or with certain discs,
2 times Zoom may not function properly.
Playable Disc : DVD,VCD
Angle
If a disc includes multi angle information, a user can watch a screen in multi angles,
The function is limited to a DVD disc supporting multi angle information.
Keep pressing [ANGLE] button till the preferred angle appears.
Every time a user presses [ANGLE] button, an angle changes in a consecutive order.
POWER
OPEN/CLOSE
TV 02
ANGLE
SUBTITLE
ZOOM
AUDIO
REPEAT
MENU
ANGLE button
REPEAT A-B
TOP MENU
ENTER
Playable Disc : DVD
29
Download from Www.Somanuals.com. All Manuals Search And Download.
To skip chapter in a DVD
1. Press POWER button to power on.
SLOW
GOTO
STEP
PBC
2. Press [OPEN/CLOSE] button to open the disc tray.
REW
PLAY/PAUSE
FF
R.SKIP
STOP
F.SKIP
3. Insert the disc and press [OPEN/CLOSE] button to close the tray.
4. To playback it, press [PLAY/PAUSE] button.
CH3/CH4
EJECT
VCR
TV/VCR
A. SEARCH
REW
PLAY
STOP
FF
PAUSE/STILL
ENCORE
REPLAY
AUDIO
5. To move to next chapter, press F.SKIP(
The current chapter moves to the next chapter.
) button.
--- TRK ---
R.TRK
REC
+
-
--- CH ---
6. Press R.SKIP(
) button.
7. Also you can return to normal speed by pressing (
) button.
Playable Disc : DVD
To play it fast
1. Press FF (
) button to start fast-play in playing.
FF,REW Button
If Every time you press the button, play speed changes like the below orders
DVD : x 2 FF →x 4 FF →x 8 FF →x 16 FF →x 32 FF →x 64 FF →PLAY →x 2 FF ....
VCD : x 2 FF →x 3 FF →x 4 FF →x 5 FF →PLAY→x 2 FF....
SLOW
GOTO
STEP
PBC
REW
PLAY/PAUSE
FF
MP3 : x 2 FF →x 4 FF →x 6FF →x 8 FF →PLAY→x 2 FF....
R.SKIP
STOP
F.SKIP
Also you can return to normal speed by pressing play/pause (
) button.
CH3/CH4
EJECT
VCR
TV/VCR
A. SEARCH
REW
PLAY
STOP
FF
PAUSE/STILL
ENCORE
REPLAY
AUDIO
2. Press REW (
) button to start reverse fast-play in playing.
--- TRK ---
R.TRK
REC
+
-
--- CH ---
If Every time you press the button, play speed changes like the below orders
DVD : x 2 FR →x 4 FR →x 8 FR →x 16 FR →x 32 FR →x 64 FR →PLAY →x 2 FR ....
DVR : x 2 FR →x 3 FR →x 4 FR →x 5 FR →PLAY →x 2 FR ....
MP3 : x 2 FR →x 4 FR →x 6 FR →x 8 FR →PLAY →x 2 FR....
Also you can return to normal speed by pressing (
) button.
Playable Disc : DVD,VCD
To play it slow
Slow Button
1. Press the SLOW button to play it slowly in PLAYBACK.
Every time you press the button, play speed changes like the below orders
VCD : x 1 SF →x 2 SF →x 3 SF →STEP BWD →x 1 SF.....
SLOW
GOTO
STEP
PBC
REW
PLAY/PAUSE
FF
R.SKIP
STOP
F.SKIP
DVD : x 2 SF →x 4 SF →x 8 SF→x 2 SR→x 4 SR →x 8 →PLAY →x 2 SF.....
CH3/CH4
EJECT
VCR
TV/VCR
A. SEARCH
Also you can return to normal speed by pressing PLAY/PAUSE (
*For the case of SVCD or VCD, Slow playback is available.
) button.
REW
PLAY
STOP
FF
PAUSE/STILL
ENCORE
REPLAY
AUDIO
--- TRK ---
R.TRK
REC
+
-
--- CH ---
Playable Disc : DVD,DVD
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeating a defined period
You may repeat a desired chapter or track.
1. Keep pressing REPEAT button till the preferred system appears.
DVD : Chapter Repeat on →Title Repeat on →Repeat off →Chapter Repeat on
VCD : REP-ONE →REP-ALL →REP OFF →REP-ONE
MP3(CD) : REP-ONE →Folder Rep →Folder →REP-ONE
Also you can return to normal speed by pressing PLAY/PAUSE (
) button.
Chapter Repet on
POWER
OPEN/CLOSE
ANGLE
SUBTITLE
ZOOM
AUDIO
REPEAT
MENU
REPEAT button
REPEAT A-B
TOP MENU
ENTER
A certain disc may not be repeated.
Playable Disc : VCD,DVD,MP3(CD)
confirming the current disc mode
While in playing, Keep pressing "DISPLAY" button till
the preferred system appears.
Display button
ENTER
Playable Disc : DVD
A/V SEL.
RETURN
SETUP
DISPLAY
2
5
3
6
9
1
CLEAR
4
7
TITEL 00/00 CHAPTER 000/000
00 : 00: 00
TITEL REMAIN
00 : 00: 00
PROGRAM
8
0
MUTE
→
→
CHAPTER REMAIN
00 : 00: 00
CHAPTER ELAPSED
00 : 00: 00
→
→
TITEL 00/00 CHAPTER 000/000
00 : 00: 00
→
Playable Disc : VCD
SINGLE ELAPSEO
00 : 00: 00
TOTAL ELAPSED
SINGLE RENAIN
00 : 00: 00
00 : 00: 00
→
SINGLE ELAPSEO
00 : 00: 00
OFF
TOTAL REMAIN
00 : 00: 00
00 : 00: 00
→
→
→
31
Download from Www.Somanuals.com. All Manuals Search And Download.
To display menus in a disc
If a disc includes menus, a user may use them.
1. Press "MENU" button.
It shows menus in the disc. Also they are different according to discs.
Move a cursor to a relative item with "MOVE IN OSD" buttons of ◀ , ▶ , ▼, ▲
button and select one with "ENTER" button or "PLAY" button.
POWER
OPEN/CLOSE
ANGLE
SUBTITLE
ZOOM
AUDIO
REPEAT
MENU
REPEAT A-B
TOP MENU
MOVE IN OSD button
Playable Disc : DVD
ENTER button
ENTER
2. Press "PBC" button.
Every time pressing "PBC" button, PBC function turns ON and OFF over and over.
Menu screen only appears when selecting “PBC ON”.
Select a number of menu screen and press "ENTER" button.
If you watch a movie without menu screen, select “PBC OFF”mode by pressing "PBC" button.
ENTER
A/V SEL.
RETURN
SETUP
DISPLAY
2
5
8
3
6
9
1
CLEAR
number button
4
7
PROGRAM
MUTE
GOTO
0
SLOW
PBC button
STEP
PBC
REW
PLAY/PAUSE
STOP
FF
R.SKIP
F.SKIP
Playable Disc : VCD 2.0
CD and VCD1.1 do not support the function.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeating a defined period (DVD)
You may repeat a desired chapter or track.
1 Select A-B Repeat Function
In Play mode, press the REPEAT button, then press left/right to select A-B Repeat.
o "A-" will highlight when A-B Repeat is selected.
NOTE: If you are playing a CD, the menu will display "Track" in place of "Chapter"
2 Mark the Starting Point
Press the ENTER button at the beginning of the segment you want to repeat (Point A).
o "B" will highlight after Point A is selected.
NOTE: The minimum AB Repeat time is 5 seconds.
3 Mark the Ending Point
Press the ENTER button again at the end of the segment you want to repeat (Point B).
o The segment will begin repeating in a continuous loop.
4 Cancel A-B Repeat
Press the REPEAT button to open the Repeat Menu,
press left/right to highlight "Off," then press the ENTER button.
A TO B SET A
A TO B SET B
A TO B CANCELLED
33
Download from Www.Somanuals.com. All Manuals Search And Download.
About VCR
VIDEO HEAD CLEANING
The video heads enable the VCR to read video information pictures from the tape during playback.
In the unlikely event that the heads become clogged with dirt video playback will be impossible.
This can easily be determined during playback of a known good tape, there is good sound, but the
picture is extremely snowy.
If this si the case, have the video cassette recorder checked by qualified service personnel.
NOTES
During normal operation of the VCR, the video and audio heads can accumulate dirt over a period
of time, especially when using an old or poor quality tape. When the heads are dirty, the picture
can get snowy and the tracking control will have little or no effect.
If this condition occurs, head cleaning cartridges may take care of the problem and restore normal
picture.
We recommend that head cleaning cartridges be used sparingly since they are very abrasive and
can damage the video heads during prolonged use.
If the problem is not resolved with the head cleaning cartridge then the unit needs to be checked
by a qualified service personnel.
ERASURE PROTECTION
Video cassettes are equipped with a safety tab to prevent accidental erasure.
When the tab is removed, recording can not be performed.
TO PREVENT ACCIDENTAL ERASURE
TO RECORD AGAIN
-After recording, break off the safety tab
with a screwdriver if you don't want to
record over the tape.
- Cover the hold with cellophane tape.
What is dew condensation symptom?
If a VCR is moved from a cool place to a warm and damp place or a
place facing a direct cool wind from air-conditioner...and others,
temperature varies sharply, which makes dew on head drums of VCR.
If dew condensation occurs,
1 First, turn it on for one or two hours before using it.
2 Do not use it because it may develop troubles of a VCR or videotape.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
About DVD
Playable Disc
DVD,Video CD (Version 1.1,2.0),S-VCD and Audio CD
Disc type
DVD
Playable
Possible
Restriction
Region number 1 or Region number All
Possible
Version 1.0/1.1/2.0, SVCD/CVD
PCM or dts
Video CD
CD
Possible
Possible
Possible
Possible
CD-R
Video-CD/CD/CD-ROM (MP3 File)
CD-RW
DVD-R
S-VCD
Video-CD/CD/CD-ROM (MP3 File)
DVD Video
SUPER Video CD
Possible
REGION MANAGEMENT INFORMATION
This unit is designed and manufactured to respond to
the Region Management information that is recorded on a DVD disc.
The region number of this player is “1”.
If the region number described on the DVD discs
1
(Region 1)
does not correspond to the Region number of this player, the player will not play this disc.
This player will play DVD discs made for “ALL”regions.
Therefore, this player will play DVD discs marked with labels
containing the region number “1”or “ALL”.
ALL
(Region ALL)
Handling Disc
- To keep a disc clean condition, please do not touch a side containing play information.
- Do not attach a bit of paper or sticky tape on it.
- Do not expose a disc to a direct sunlight or electric heating systems.
- After using it, please keep a disc in a case.
Cleaning Disc
- Before using it, please rub it from center toward outside with clean clothes.
- Do not use any type of solvent such as thinner, benzol (benzene), commercial
cleaning goods or antistatic sprays.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms related with DVD
DVD
A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include
135 minutes of video information. And for audio, it can hold up to 8 kinds of languages
and 32 kinds of subtitle languages.
By using MPEG-2 video compression and digital 3D surround sound,
DVD realizes highdefined screen and quality sound like a movie theater.
CDDA
A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.
MP3
PBC
Audio compression format that enables audio files to be stored and transferred on a computer
with a relatively small file size. It enables you to enjoy CD quality music. (Short for MPEG-1 Layer 3)
This is recorded on a Video CD 2.0, Video CD 3.0, SVCD and CVD.
The scenes or information to be viewed (or listened to) can be selected interactively with
the TV monitor by looking at the menu
shown on the TV monitor. It stands for PlayBack Control.
CHAPTER
It means the information recorded in a DVD. A title in a DVD is divided into many tracks,
of which a track is called as a chapter.
A certain scene of a screen can be quickly searched with the chapter number.
TITLE
It means the information recorded in a DVD. A DVD can be divided into may titles.
TRACK It means the information recorded in a video CD and audio CD.
A disc consists of many a track, for which a user can search a certain position.
Angle
Some DVD discs contain the various scenes that have been simultaneously shot from a number of
different angles.
S-VIDEO
The S-VIDEO output separates the color (C) and luminance (Y) signals before transmitting them to the
TV set in order to achieve a sharper picture. So this must be selected from the menu to enable the SVIDEO
output to function.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Before doubting about troubles (DVD)
Symptom
Checks
- a If a DVD is from overseas, it may not be played. Please check a
DVD’s region code whether it has the relative region code 1 or All.
- a Please check whether a DVD is inserted in a right direction.
- a If it is a CD-ROM for PC or DVD-ROM, it does not work.
The recorder does not play.
No sound comes through.
- a Play mode may be “SLOW”or “PAUSE”(In abnormal speed
play, no sound comes through)
- a Did you connect the parts in right way?
- a Please check the operative condition of TV or amplifier.
- a From SETUP, please check “AUDIO”items.
- a Did you turn on your TV sets?
A disc is playing but screen does
not appear or poor screen appears.
- a Did you connect the parts in right way?
- a The play may be in “PAUSE”.
- a A disc may have some contaminants or be damaged.
- a A disc may be bad one.
- a Please check the connection with Dolby Digital amplifier.
- a Please check the plugs are connected with one another tightly.
- a Some contaminants may be remained in connection terminal.
Sound is irregular
- a Please check the degree of remote control, distance or any
interruption.
REMOTE does not work.
- a Battery may be weak or exhausted.
- a When you operate DVD, use it by pressing [DVD] button.
“AUDIO”or “SUBTITLE”button
does not work.
- a If a DVD does not include language information, it does not
support the function.
- ANGLE”is supported only in a DVD contains multi angle
scenes. Also a user can confirm the support with the “ANGLE”
mark on screen.
“ANGLE”button does not work
while a DVD is playing.
- a Please check the degree of remote control, distance or any
“MENU”does not appear while a
DVD is playing.
interruption.
- a Please check a battery in remote control whether it is exhausted
or not.
- a A DVD may not contain menu information.
- a The recorder may not coincide with your TV system. Please
press “SYSTEM”to match to NTSC system.
Screen shakes or appears only in
black and white. (or Subtitle
shakes)
- a A disc may have some contaminants or be damaged.
- a If you playback a DVD disc of PAL system whose region code is
“ALL”, the playback screen may shake.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Before doubting about troubles (VCR)
Symptom
Checks
- a Please check whether a power plug is inserted in an electric outlet.
- The Polarity of power cord is not correct.
“Power On”does not work.
- Please check whether a videotape is inserted in.
- a Try to insert a plug again.
It does not work even in “Power
On”.
- Check circuit fuse at source of power.
(see vehicle/converter manual.)
- a Please check whether a power plug is inserted in an electric outlet.
- a Please check whether a videotape is in.
A videotape is not inputted in.
- a Please check whether a videotape is inserted in a right direction
(a side of transparent window should be on the upside)
- a Have you inputted a videotape again just after the tape was
ejected? Please try it again after fully ejecting it.
- a When a videotape forces to be ejected, the tape may not be
inputted. In the case, please pull out an outlet, and then push the
tape smoothly.
- That’s why a safe mode to protect a videotape is operated
On inputting a videotape,
the tape is re-ejected.
automatically. Please pull out the tape and input it again.
- In case the product is used for a long time, a videotape may not be
ejected for a film inside may be stretched. In the case, please pull
out a power plug for about 10mins and then press “EJECT”button.
A videotape is not ejected.
- a Please check your antenna’s connection.
A channel on video and a play
screen does not appear.
- a TV channel should be fixed on video channel (3 or 4).
- a Please check your antenna’s signal whether it may be weak.
In case of its weakness, please use a frequency amplifier connected
with the device.
- a While in no use of VCR, was it turned on?
Noise (screen noise) appears on
screen.
- a While in recording a program, do you watch another channel?
While in playing, noise appears.
- Please press “TRACKING”for better screen. Videotape may be
poor. Try to change it to another one.
Sound and screen are irregular.
- a Please use a head-cleaner to clean VCR heads. VCR heads may
be contaminated.
Sound comes out but screen does
not appear.
Screen is irregular and stripes appears.
"Screen Error" message is displayed
in a screen.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Checks
While recording and playing, the
top of screen extremely waves.
- a Since VCR Play signals are not stable like a TV signals, screen
- a In case videotape is the one recorded by other products or old
one, stripe may appear on the screen.
A screen is not clear.
- a Try to adjust the screen by [TRACKING+/-] button
- a Try to use a head-cleaner.
- Try to use a head-cleaner.
- a Try to adjust the screen
A screen at pause is trembling or
slow screen is not clear.
- a For recording, you should use videotape with a tab.
- a Please check whether a channel is fixed on video. If not, you
have to turn it into “TV”by pressing “OUTPUT”button.
- a Are RF cables inputted antenna connection terminal correctly?
- a Does a CH number selected in display section appear?
- a Please check a tab on a tape whether it is broken or not. (If it was
broken, please scotch-tape it)
Recording a TV program is
impossible.
- a Check whether a tape attached with a recording tap is inserted.
- a Check whether the screen is displayed in VCR Only Channel.
Press [OUTPUT] button in this remote controller to adjust in
"General Broadcast" condition.
- a Is the rounded line (RF cable) connected in "ANT.IN" terminal?
- a Is the selected channel number shown in Display?
- a Is a tab of cassette tape broken? (Please cover a tab hole with
cellophane adhesive tape (Scotch tape).)
- a You may not memorize channels.
In spite of pressing “CHANNEL”,
- a Please check your channel setting or press a number button.
a channel can not be set.
- a Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be
duplicated in a good condition.
While duplicating, screen is not
clean and distorted.
remote control does not work.
- a Battery may be weak or exhausted.
- a A receiver of remote control may be different with a sender.
- a In case a videotape is positioned in the beginning, “VISS REW”
and “REW”do not work.
Buttons on remote control do not
work.
- a In case a videotape is positioned in the end, “FF”, “VISS FF”,
“PLAY”and “REC”do not work.
- a Please check whether another button is pressed.
Cable broadcasting can not be
selected.
- a Please select “CABLE”not “NETWORK”from the “CHANNEL
SETTING”.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
VCR PART
Power Supply
DC 12V
Consumed electricity
Weight
24W
approx 3.9 Kg
Dimension (WxHxD)
Operative temperature
Installation condition
Received channels
Signal type
265mm x130mm x 275mm
5°C~35°C (Humidity : 80% maximum)
Horizontal
VHF: 2-13 CH / UHF: 14-69 CH / Cable: 1-125
NTSC-M
Antenna Input/output
VIDEO input
U/V-mixed: 75½ unbalanced
1.0 Vp-p 47k ohm unbalanced, RCA JACK
Line Input -8.8dBm, 47k ohm minimum
3 or 4 CH
AUDIO input
VHF output
VIDEO output
1.0 Vp-p 47k ohm unbalanced, RCA JACK
TAPE WIDTH
12.65mm (1/2INCH) VHS
Record System of Luminance Signal
Record System of Color Signal
Tape Speed
Frequency Modulation Recording
Down converted sub carrier phase shift system
SP : 33.35 mm/s EP : 11.12 mm/s (FOR NTSC)
SP : 2Hours EP : 6 Hours (FOR NTSC WITH T-120)
ABOUT 4 Min (T-120)
REC Time (T-120)
FF/REW Time
Luminance S/N
SP : 43 dB Min
1.Mono
EP : 41 dB Min
Audio Signal Output
EE/SN-1 : -5.8dBm±2dBm(1Khz) 1Kohm Maximum
SN-2 : SN-1+2,-5dBm(7Khz) 1Kohm Maximum
2. Hi-Fi
EE/REC => PB;SP -5.8dBm±2dBm(400Hz) 1Kohm Maximum
SN-7A; -5.8dBm±2dBm(1Khz) 1Kohm Maximum
Audio S/N (A.W)
MONO ; SP 42 dB Minimum SLP 40dB mINIMUM
Hi-Fi ; SP/SLP 68dB Minimum
A.Frequency Range
Hi-Fi ; SP/SLP 0+1,-3dB [20Hz-20KHz]
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Distortion
Hi-Fi; sp/slp 0.7% Maximum
Mono ; SP 4.0% Maximum/SLP 5.0% Maximum
Wow Flutter
Hi-Fi ; SP/SLP 0.012% Maximum
Mono ; SP0.0300% Maximum/SLP 0.400% Maximum
Hi-Fi Channel Balance
SP/SLP ±3.0 Miximum
Hi-Fi CH Seperation (A.Weighted)
sp/slp : 45dB Min
DVD PART
Non-contact Optical Pick-up System
Pick-up System
AT Attachment Packet Interface (ATAPI)
* DVD/VCD/CD/CD-R/CD-RW/MP3/ SVCD/DVD-R
* DVD : DVD-5, DVD-9, DVD-10, DVD-18, DVD-R
* CD : CD-DA, CD-R, CD-R/W, Video CD, DVCD, SVCD,
Enhanced-CD, Mixed-CD, CD-I
* Disc diameter : 12cm, 8cm
Playable disc
* Disc Capacity
DVD : 4.7GB(DVD-5, single layer)
8.5GB(DVD-9, dual layer)
9.4GB(DVD-10, double side & single layer)
17.1GB(DVD-18, double side & dual layer)
CD : 550MB(Mode 1,12cm)
680MB(Mode 2,12cm)
180MB(8cm)
* Disc Thickness : 1.2mm (CD & DVD)
* Disc Center Hole : 15mm diameter
* Track pitch : 1.6§- (CD), 0.74§- (DVD)
* Scanning velocity : 1.2~ 1.4 m/sec (CD)
3.49 m/sec (DVD Single Layer)
3.84 m/sec (DVD Dual Layer)
* Block Size
DVD : 2,048 bytes
CD : Mode 0
Mode 1
2,352 bytes
2,048 bytes
2,336/2,048/2,328 bytes
Mode 2
Audio Signal Output
Audio S/N(A. W)
* 2.0 Vrms
* 100dB(RCA JACK) Digital audio output
* 20 Hz (CH 3) : - 0.3 ±1 dB
1 KHz(CH 2) REFERENCE : 0 dB
20 KHz(CH 6) : - 1.5 ( ±1 dB)
Audio Frequency range
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Analogue Audio output
(2CH. L/R)
* DVD : 48/96KHz sampling
* VCD : 44.1KHz sampling
* CD : 44.1KHz sampling
Digital Audio output (COAXIAL)
Vibration
* DVD : 48KHz sampling
* VCD : 44.1KHz sampling
* CD : 44.1KHz sampling
* Data read Operation :
0.25G(0'P), at 10 to 500Hz sweep, sine wave,
1 Octave/min(except resonance point)
* Non-operating :
2.0G rms, at 10 to 500Hz random
(30min/Axis for X, Y, Z)
After test, there shall be no hard errors.
Shock
* Data read Operation :
6G, 11msec half sine wave
(20 shocks for X,Y,Z with 3 seconds between shocks)
* Non-operating :
60G,11msec half sine wave
After test, there shall be no hard errors
Electrostatic
Discharge
Requirements
* The drive should withstand 8kV test voltage
of Electrostatic Discharge and meet
the acceptance criteria as specified in IEC 801-2.
* MTBF : 100,000 POH at 20% duty cycle
in room temperature.
Loader Reliability
* MTTR : max. 30 min
* Tray : min. 30,000 cycle (with limit switch)
* Feeding : min. 1 million full stroke seeks
(without limit switch)
* Noise : max. 40 dB (at 1 m)
Data Transfer
Rate(Sustained)
* DVD : 2.76 MB/sec(2X Speed in CLV mode)
* CD : max. 600 KB/sec(4X Speed in CLV mode)
* DVD : Less than 300 ms (Average), random
Less than 360 ms (Average), full stroke
* CD : Less than 340 ms (Average), random
Less than 400 ms (Average), full stroke
Access Time
Data Buffer
Error Rate
256KB (DVD/CD)
* max. 10E-12 (CD) , max. 10E-17 (DVD)
Disc Loading
* Type : motorized tray
* Time : 1.5 sec(typical)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating time
* Spin-up time : Less than 13 sec (Typical)
* Stop time : Less than 2 sec(Typical)
Laser parameters
* DVD
Semiconductor Laser / Wave length : 650nm /
Emission power : 0.28 mV
*CD
Semiconductor Laser / Wave length : 780nm
Emission power : 0.30 mV
FM Transmitter
*FM 88.1MHz ~89.9 MHz(11 Step, 0.2MHz)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Pyle Audio Inc.
1600 63rd Street
Brooklyn, NY 11204
Download from Www.Somanuals.com. All Manuals Search And Download.
|