PLUS Vision Projector V 1080 User Manual

DATA PROJECTOR  
V-1080/V-807  
User’s Manual  
A U T O  
M E N U  
Q U I C K  
S O U R C E  
M E N U  
P O W E R  
R
E
W
P O  
U S  
T A T  
S
V O L  
V K S T N  
M
O
O
Z
C A N C E L  
E N T E R  
H K S T N  
O
T
U
A
r
C
b
C
U
N
E
T
Y
C
M
r
E
P
b
S
A
P
Y
O
E
I
- V  
I P  
P
K
S
I C  
B
U
Q
G
F
R
F
O
E
E
T
I D  
U
V
M
L
A
R
I
E
I
W
D
O
E
P
Z
E
E
R
F
N
O
IMPORTANT  
Digital Light Processing, DLP, Digital Micromirror Device and DMD are all trademarks of Texas Instru-  
ments.  
Windows 98, Windows 95, and Windows 3.1 are registered trademarks in the United States and other  
countries of Microsoft Corporation.  
IBM is a registered trademark of International Business Machines Corporation.  
Macintosh and MAC are trademarks of Apple Computer Inc.  
Other names of companies and products mentioned are trademarks and registered trade-marks of  
the respective companies. TM , ® and © marks are not used in this document.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INFORMATION  
Important Safeguards  
These safety instructions are to ensure the long life of the unit and to prevent fire and shock.  
Please read them carefully and heed all warnings.  
Installation  
For best results, use the unit in a darkened room.  
Place the unit on a flat, level surface in a dry area away from dust and moisture.  
Do not place the unit in direct sunlight, near heaters or heat radiating appliances.  
Exposure to direct sunlight, smoke or steam can harm internal components.  
Handle the unit carefully. Dropping or jarring can damage internal components.  
Do not place heavy objects on top of the unit.  
Power Supply  
The unit is designed to operate on a power supply of 100 - 240 V 50/60 Hz AC. Ensure  
that your power supply fits these requirements before attempting to use the unit.  
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment  
and shall be accessible.  
Handle the power cable carefully and avoid excessive bending. A damaged cord can  
cause electric shock or fire.  
Disconnect the power cable (mains lead) from the power outlet after using the unit.  
Before disconnecting the power cable, make sure that the POWER indicator lights in  
amber (not blinking or in green).  
Cleaning  
Disconnect the power cable (mains lead) from the unit.  
Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild  
detergent. Never use strong detergents or solvents such as alcohol or thinner.  
Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the  
lens.  
Clean the ventilation slots and speaker grills on the unit periodically using a vacuum  
cleaner. If accumulated dust blocks the ventilation slots, the unit will overheat, which may  
cause the unit to malfunction.  
Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attach-  
ment, such as a crevice tool, to prevent the damage to the unit.  
Lamp Replacement  
Be sure to replace the lamp when the Status indicator comes on. If you continue to use  
the lamp after 1000 hours of usage, the lamp will turn off.  
Download from Www.Somanuals.cEom-3. All Manuals Search And Download.  
IMPORTANT SAFETY INFORMATION  
Fire and Shock Precautions  
Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the  
buildup of heat inside the unit. Allow at least 10 cm (3 inches) of space between the unit  
and walls.  
Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do  
not attempt to retrieve any objects that fell into the unit. Do not insert any metal objects  
such as a wire or screwdriver into the unit. If something should fall into the unit, immedi-  
ately disconnect the power cable from the unit and have the object removed by a quali-  
fied PLUS service person.  
Do not place any liquids on top of the unit.  
Do not look into the lens while the unit is on. Serious damage to your eyes could  
result.  
Carrying around  
When carrying the unit around, please use the carrying case that comes with it and, to protect  
the lens from scratches, always shut the sliding lens cap. Also, do not subject the unit to  
strong mechanical shock.  
Download from Www.Somanuals.cEom-4. All Manuals Search And Download.  
Major Features  
Book-sized, lightweight (at about 0.9 kg/2.0 lbs) and small high-inten-  
sity mobile projector  
DMDTM and the synergistic effects of our own optical design serve to improve the optical utilization  
efficiency.The three light sources (RGB) required in color expression are reproduced with one DMDTM  
.
These factors have enabled a design that offers both high intensity and small size/lightweight fea-  
tures.  
Sharp, clear picture  
The absence of RGB color infidelity and the inconspicuous gaps between the individual dots permit  
the display of small characters and diagrams with distinct clarity. An up-close look reveals the differ-  
ence even more.  
Beautiful reproduction of high-quality images from DVD  
Faithful reproduction of color tones gives rise to the display of natural images. High-quality images  
such as those from DVD and other sources bring out the display capabilities that are an essential  
strength of the digital projector.  
Heightened effectiveness with picture in picture  
The video image is projected as a sub-picture within the personal computer picture.This expands the  
usefulness of the projector even more.  
Digital technology corrects the horizontal and vertical keystone dis-  
tortion of the projected picture  
New technology is used to correct the horizontal keystone distortion in addition to the regular key-  
stone correction.This permits even simpler setup adjustments.  
Connection permitted for personal computers equipped with DVI con-  
nectors  
Inclusion of a DVI connector allows the input of analog RGB signals as well as digital RGB signals.  
(The supplied conversion cable supports personal computers having a regular analog RGB connec-  
tor. See the Table of Supported Frequencies on Page 69 for information about display resolution.)  
Download from Www.Somanuals.cEom-5. All Manuals Search And Download.  
Table of Contents  
Preparation and Background Knowledge  
IMPORTANT SAFETY INFORMATION ............................................................................ E-2  
Major Features ................................................................................................................. E-5  
Table of Contents............................................................................................................. E-6  
Checking the Supplied Accessories .............................................................................. E-8  
Names of the Main Unit Parts ....................................................................................... E-10  
Names of the Remote Control Parts ............................................................................ E-12  
Preparing the Remote Control...................................................................................... E-13  
Button Battery Replacement ..................................................................................... E-13  
Remote Control Range ............................................................................................. E-14  
Setup and Projection  
The Procedure Up to Projecting to the Screen ........................................................... E-15  
Placement Guide  
V-807 Screen Size and Projection Distance .............................................................. E-16  
V-1080 Screen Size and Projection Distance ............................................................ E-17  
Connecting Personal Computers and Video Equipment  
Connections with PC Connectors  
Personal Computers with a DVI Connector......................................................... E-18  
Personal Computers with a Mini D-Sub 15-Pin Connector ................................. E-19  
To Output the External Output Signal of a Notebook Computer ......................... E-20  
Connections with Video Connectors  
Video Equipment with VIDEO Connectors .......................................................... E-21  
Video Equipment with S-VIDEO Connectors ...................................................... E-21  
Connections with Component Signals  
When the Video Connectors are Y, Cb, and Cr Connectors ................................ E-22  
When the Video Connectors are Y, Pb, and Pr Connectors ................................ E-22  
Connections with Audio Connectors ......................................................................... E-23  
Power Cable Connections and Switching the Power On/Off  
Operating................................................................................................................... E-24  
Finishing .................................................................................................................... E-25  
Adjustment of the Projection Screen  
Projection Screen Position Adjustment ..................................................................... E-26  
Making Adjustments with the Adjusters .............................................................. E-27  
Focus Adjustment...................................................................................................... E-27  
General Operation  
Input Selection ............................................................................................................... E-28  
Automatic Adjustment of Analog RGB ........................................................................ E-29  
Selection of Aspect Ratio ............................................................................................. E-30  
Projecting a Sub-Picture ............................................................................................... E-31  
Freezing a Moving Picture ............................................................................................ E-31  
Cancelling Video and Audio Temporarily..................................................................... E-31  
Using the Quick Menu ................................................................................................... E-32  
Correcting Keystone Distortion of the Projection Screen ......................................... E-34  
Enlargement of the Image and Video Movement ........................................................ E-35  
Adjustment of the Volume ............................................................................................. E-36  
Download from Www.Somanuals.cEom-6. All Manuals Search And Download.  
Table of Contents  
Menu Operations  
Menu Operation Method................................................................................................ E-37  
Names and Functions of the Parts ............................................................................ E-37  
Names and Functions of the Remote Control Buttons that Operate Via a Menu ...... E-37  
Names and Functions of the Main Unit Buttons Used in Menu Operation ................ E-38  
Names and Functions of Menu Screen Parts............................................................ E-38  
Performing Menu Operations .................................................................................... E-39  
Selecting Another Menu Name with Remote Control Operation ............................... E-43  
List of Item Names Offering Input Selection and Adjustments/Settings .................... E-44  
Adjustments and Settings  
Picture  
Brightness / Contrast / Color / Tint / Sharpness ........................................................ E-46  
Picture Adjustment / Fine Picture / H Position / V Position ........................................ E-47  
Reset ......................................................................................................................... E-48  
Color  
Gamma ..................................................................................................................... E-49  
Color Temp. ............................................................................................................... E-49  
Color System ............................................................................................................. E-50  
Color Space .............................................................................................................. E-50  
View  
Aspect ....................................................................................................................... E-51  
Filter .......................................................................................................................... E-52  
Projection .................................................................................................................. E-52  
Keystone.................................................................................................................... E-53  
Picture in Picture ....................................................................................................... E-54  
Setup  
Language .................................................................................................................. E-55  
Auto Source............................................................................................................... E-55  
Auto Power Off .......................................................................................................... E-56  
On Screen ................................................................................................................. E-56  
Menu Position ............................................................................................................ E-57  
YPbPr ........................................................................................................................ E-57  
Background ............................................................................................................... E-57  
White Balance ........................................................................................................... E-58  
Info.  
Status ........................................................................................................................ E-59  
Factory Default .......................................................................................................... E-59  
Lamp Timer Reset ..................................................................................................... E-59  
Resolution / Frequency ............................................................................................. E-60  
Lamp Timer ............................................................................................................... E-60  
Miscellaneous  
When the STATUS Indicator is Lit/Flashes .................................................................. E-61  
Troubleshooting ............................................................................................................. E-63  
Cleaning ......................................................................................................................... E-65  
Replacing the Lamp Cartridge ..................................................................................... E-66  
Specifications ................................................................................................................ E-69  
Table of Supported Frequencies .................................................................................. E-70  
Cabinet Dimensions ...................................................................................................... E-71  
Download from Www.Somanuals.cEom-7. All Manuals Search And Download.  
Checking the Supplied Accessories  
Remove the main unit and the accessories from the box and check that the following items are included.  
Remote control  
Power cable (1.8 m / 5.9 feet) [1]  
This power cable supplies power to the unit. See Page E-24  
about connections.  
(includes one button battery) [1]  
This controls the projector. Please remove the transportation  
insulation sheet at time of purchase. (See Page E-13.)  
V O L  
N
T
S
K
V
Z O O M  
C A N C E L  
E N T E R  
H K S T N  
A U T O  
U
Y r  
E N  
M
Y P r  
A S P E C T  
P I P  
S V I D E O  
Q U I C K  
R
O F F  
V I D E O  
D I G I T A L  
F R E E Z E  
M U T E  
P O W E R  
O N  
DVI / Mini D-sub 15-pin conversion cable  
(19 cm / 0.6 feet) [1]  
This is used when the monitor connector of the personal com-  
puter is a mini D-sub 15-pin connector. See Page E-19, 22  
about connections.  
RGB signal cable  
(Mini D-sub 15-pin, 2 m / 6.6 feet) [1]  
This is used when the monitor connector of the personal com-  
puter is a mini D-sub 15-pin connector. See Pages E-19 about  
connections.  
No. 772708000  
No. 772709000  
S-Video cable (3.5 mm diameter plug / Mini DIN  
4-pin plug, 1.5 m / 4.9 feet) [1]  
This cable is used in the connection of video equipment that  
has an S-video connector. Connections are described on Page  
E-21.  
Video cable (3.5 mm diameter plug / RCA pin  
plug, 1.5 m / 4.9 feet) [1]  
This cable is used in the connection of video equipment that  
has an RCA jack type video connector. Connections are de-  
scribed on Page E-21.  
No. 772705000  
No. 772704000  
Download from Www.Somanuals.cEom-8. All Manuals Search And Download.  
Checking the Supplied Accessories  
Audio cable (2.5 mm diameter plug / RCA pin  
plug, 1.5 m / 4.9 feet) [1]  
This cable is used with equipment that has phono type audio  
jacks. Connections are described on Page E-23.  
No. 772706000  
Soft pouch (for projector and accessories) [1]  
This pouch is used when storing or moving the projector. The  
pouch is made up of two portions that are joined by hook-and-  
loop tape to form a single item. The pouch can be separated  
into two pieces.  
Accessories  
Projector  
User's Manual (CD-ROM edition) [1]  
User's Manual (Simplified Edition) [1]  
Precautions  
* Leave the power cable plugged in (for 5 to 10 minutes) until the projector returns to room  
temperature before placing the projector inside the soft pouch. Placing the projector into the  
pouch soon after switching off the power could cause the projector to break down.  
* Be sure to attach the lens cap and place the projector into the soft pouch with the lens facing  
upward.  
Download from Www.Somanuals.cEom-9. All Manuals Search And Download.  
Names of the Main Unit Parts  
STATUS indicator [E-61]  
POWER indicator [E-24]  
MENU button [E-38]  
STATUS  
POWER  
POWER button [E-24]  
POWER  
MENU  
SOURCE  
SOURCE button [E-28]  
QUICK  
MENU  
AUTO button [E-28]  
AUTO  
AUDIO  
VIDEO  
QUICK MENU button [E-32]  
U
N
T O  
E
U
I C K  
A
M
U
Q
S O U R C E  
U
E N  
E R  
W
M
P O  
P O W E R  
S T A T U S  
Speaker  
Remote control  
sensor [E-14]  
Exhaust vents  
Exhaust  
vents  
Front adjuster  
Ventilation  
slots  
Remote control sensor  
Lens  
Front adjuster button [E-27]  
(There is also one on the left side.)  
Focus ring [E-27]  
Lens cap  
To protect the lens, attach the lens  
capwhentheprojectorisnotinuse.  
Precautions  
The ventilation slots discharge the heat of the lamp and care must be taken not to come into  
contact with them.  
Download from Www.Somanuals.Eco-m1.0All Manuals Search And Download.  
Names of the Main Unit Parts  
AUDIO jack [E-23]  
VIDEO jack [E-21, 22]  
OURCE  
QUICK  
MENU  
AUT  
O
AUDIO  
VIDEO  
PC connector [E-18,19,22]  
PC  
STAT  
Ventilation slots  
US  
P
O
W
E
R
Built-in security slot  
(See description below.)  
POWER  
MENU  
S
O
U
R
C
E
QUICK  
MENU  
AUTO  
A
U
D
IO  
V
ID  
E
O
PC  
AC IN connector [E-24]  
Rear adjuster [E-27]  
Ventilation slots  
Lamp cover [E-67]  
Front adjusters [E-27]  
Built-in Security Slot  
This security slot supports the MicroSaver Security System manufactured by  
Kensington Microware Inc.  
Download from Www.Somanuals.Eco-m1.1All Manuals Search And Download.  
Names of the Remote Control Parts  
V K S T N  
E N T E R  
Z O O M  
C A N C E L  
H K S T N  
A U T O  
Y C b C r  
M E N U  
A S P E C T  
S - V I D E O  
Y P b P r  
P I P  
Q U I C K  
R G B  
O F F  
V I D E O  
D I G I T A L  
F R E E Z E  
M U T E  
P O W E R  
O N  
Infrared transmitter [E-14]  
POWER button [E-24]  
PIP button [E-31]  
(Displays the picture associated  
with the VIDEO connector as a  
smaller picture within the display  
screen associated with the PC  
connector)  
F
REEZE button [E-31]  
ON  
POWER  
MUTE  
OFF  
PIP  
(Freezes moving pictures)  
FREEZE  
DIGITAL  
VIDEO  
QUICK  
MUTE button [E-31]  
(Temporarily cancels the  
video and audio)  
RGB  
YPbPr  
YCbCr  
AUTO  
Buttons used for input selec-  
tion [E-28]  
DIGITAL button, RGB button,  
YPbPr button, VIDEO button, S-  
VIDEO button, and YCbCr but-  
ton  
AUTO button [E-29]  
(Automatic adjustment of the  
analog RGB moving image)  
S-VIDEO  
ASPECT  
QUICK button [E-32]  
(Displays a simplified menu)  
CANCEL  
MENU  
ASPECT button [E-30]  
(Selects the vertical and hori-  
zontal ratio of the screen)  
ENTER  
HKSTN  
ZOOM  
Buttons used for menu opera-  
tions [E-37]  
VKSTN  
VOL  
HKSTN button [E-34]  
(Horizontal keystone distortion  
correction display)  
VKSTN button [E-34]  
(Vertical keystone distortion cor-  
rection display)  
ZOOM button [E-35]  
(Digital zoom adjustment display)  
VOL button [E-36]  
(Volume adjustment display)  
+/– button  
(Used in all adjustments)  
Precautions  
Handling of the Remote Control  
* Do not drop the remote control or handle it inappropriately.  
* Do not expose the remote control to water or other liquids. Should the remote control become  
wet, wipe it dry immediately.  
* Try to avoid use in hot and/or humid locations.  
* Please keep button batteries out of the reach of children. If a battery is swallowed, promptly  
obtain the medical care of a doctor.  
* Remove the batteries from the remote control when it is not going to be used for a long period.  
* Some operations (such as menu operations) are available only through the use of the remote  
control and attention should be given to its careful handling.  
Download from Www.Somanuals.Eco-m1.2All Manuals Search And Download.  
Preparing the Remote Control  
Button Battery Replacement  
Using the remote control for the first time  
The battery compartment is fitted with a transportation insulation sheet at  
the time of shipping. Pull out the sheet and remove it.The remote control is  
now ready for use.  
Replacement Method  
Insert the tip of a ballpoint pen or some other pointed object into the hole of the  
battery holder, then pull out to open.  
1
Remove the old battery and install a new button battery with (+) side facing upward in the battery holder.  
2
Purchase a CR2025 type battery for replacement.  
H
N
P
A
J
S
T
R2025L  
3
M
O
V
nO  
C
L
L
2
-
LiC  
E
CR2025  
Insert the battery holder into the remote control and push in until the battery  
holder closes with a "click" sound.  
3
H
N
P
A
J
25  
20  
T
L
M
R
C
L
L
O
nO  
V
3
2
-
LiC  
E
CR2025  
Download from Www.Somanuals.Eco-m1.3All Manuals Search And Download.  
Preparing the Remote Control  
Remote Control Range  
Point the infrared transmitter of the remote control toward the remote control sensor located at the front  
or rear of the main unit and operate.  
Reception of the remote control signal should generally be possible within the range illustrated below.  
Remote control infrared  
transmitter  
4m / 13.1 feet  
Remote control sensor  
30˚  
30˚  
Side View  
7m / 23 feet  
4m / 13.1 feet  
50˚  
50˚  
7m / 23 feet  
Remote control  
sensor  
Remote control infrared  
transmitter  
Top View  
Note  
* Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or  
the obstruction of the signal by an obstacle located in the pathway may prevent operation.  
* The remote control will not function when the battery is exhausted.  
Download from Www.Somanuals.Eco-m1.4All Manuals Search And Download.  
The Procedure Up to Projecting to the Screen  
Perform setup adjustments in the following order.  
Position the projector  
1
See "Projection Distance and Screen Size" on Pages E-16 and E-17.  
Determine the locations to set up the screen and the projector.  
Connect the video equipment and personal computer  
2
Connect your equipment to the projector.  
When the personal computer has a DVI connector or a mini D-sub 15-pin connector  
See "Connections with PC Connectors" on Page E-18.  
When the video equipment has a video connector or an S-video connector  
See "Connections with Mini D-Sub 15-Pin Connectors" on Page E-19.  
When the video equipment has a YCbCr connector or a YPbPr connector  
See "Connections with Component Signals" on Page E-22.  
When playing the audio through the built-in speaker of the projector  
See "Connections with the AUDIO Jack" on Page E-23.  
Connecting the power cable and switching on the power  
3
See "Operating" on Page E-24.  
See "Finishing" on Page E-25.  
Switching on the power of the personal computer and video equipment  
4
Properly adjust the projection image to the screen  
5
See "Projection Screen Position Adjustment" on Page E-26.  
Focusing  
6
See "Focus Adjustment" on Page E-27.  
Selecting input equipment  
7
See "Input Selection" on Page E-28.  
Adjust the screen or video image  
8
Adjust the image to the optimum condition as required.  
See the Table of Contents for the adjustment items.  
Note  
* Please purchase a screen.  
* A DVI-D cable (order code 28-697), which is available separately, is required for connections with the DVI  
connector of the personal computer.  
* A component cable (order code 28-698), which is available separately, is required to connect a DVD player or  
other equipment with YCbCr connectors.  
* A component cable (order code 28-690), which is available separately, is required to connect high definition  
(HD) video equipment or other equipment with YPbPr connectors.  
Download from Www.Somanuals.Eco-m1.5All Manuals Search And Download.  
Placement Guide  
Use this information as a guide to find out about the screen size when the projector is placed at a  
certain location, or to find out the approximate size of a screen that will be required.  
The projection distance over which focussing is adjustable is 1.2 m (3.9 feet) to 6.9 m (22.6 feet) from  
the front of the main unit lens for V-807 and 1.2 m (3.9 feet) to 6.6 m (21.7 feet) for V-1080. The  
projector should be placed within this range.  
Please see the projection distance table for the model of projector that you have purchased.  
V-807 Screen Size and Projection Distance  
m (feet)  
4.0(13.1)  
Height from center of lens to top edge of the projection  
200"  
180"  
3.5(11.5)  
3.0(9.8)  
2.5(8.1)  
2.0(6.6)  
1.5(4.9)  
1.0(3.3)  
0.5(1.6)  
150"  
120"  
100"  
h1  
80"  
60"  
2.0  
40"  
35"  
h2  
17.2˚ Projection angle  
0.5  
1.0  
1.5  
2.5  
3.0  
3.5  
4.0  
4.5  
5.0  
5.5  
6.0  
6.5  
7.0 (m)  
0
(1.6) (3.3) (4.9) (6.6) (8.1) (9.8) (11.5) (13.1) (14.8) (16.4) (18.0) (19.7) (21.3) (23.0)  
(feet)  
Projection Distance  
Height from center of lens to  
bottom edge of the projection  
Center of lens  
Screen Size Width x Height  
Projection Distance  
Height h1  
Height h2  
Screen Size  
Designation (Inches)  
(m)  
(feet)  
(m)  
(feet)  
3.94  
(m)  
(feet)  
2.10  
2.40  
3.58  
4.79  
5.97  
7.19  
8.99  
10.79  
11.98  
(m)  
(feet)  
0.36  
0.39  
0.59  
0.79  
0.98  
1.18  
1.48  
1.77  
1.97  
35"  
40"  
0.71
ן
0.53  
0.81
ן
0.61  
1.22
ן
0.91  
1.63
ן
1.22  
2.02
ן
1.52  
2.44
ן
1.83  
3.05
ן
2.29  
3.66
ן
2.74  
4.06
ן
3.05  
1.20  
1.37  
2.06  
2.75  
3.43  
4.12  
5.15  
6.18  
6.87  
0.64  
0.73  
1.09  
1.46  
1.82  
2.19  
2.74  
3.29  
3.65  
0.11  
0.12  
0.18  
0.24  
0.30  
0.36  
0.45  
0.54  
0.60  
2.33
ן
1.74  
2.66
ן
2.00  
4.00
ן
2.99  
5.35
ן
4.00  
6.63
ן
4.99  
8.00
ן
6.00  
10.00
ן
7.51  
12.00
ן
8.99  
13.32
ן
10.00  
4.49  
60"  
6.76  
80"  
9.02  
100"  
120"  
150"  
180"  
200"  
11.25  
13.52  
16.90  
20.28  
22.54  
* There is a tolerance of ±5% due to design values.  
* This table uses the lens apex and lens center as references and requires that the projec-  
tor be in a horizontal condition (with front and rear adjusters fully withdrawn).  
Download from Www.Somanuals.Eco-m1.6All Manuals Search And Download.  
Placement Guide  
V-1080 Screen Size and Projection Distance  
Height from center of lens to top edge of the projection  
m (feet)  
4.0(13.1)  
200"  
180"  
3.5(11.5)  
3.0(9.8)  
2.5(8.1)  
2.0(6.6)  
1.5(4.9)  
1.0(3.3)  
0.5(1.6)  
150"  
120"  
100"  
h1  
80"  
60"  
2.0  
40"  
36"  
h2  
17.2˚ Projection angle  
0.5  
1.0  
1.5  
2.5  
3.0  
3.5  
4.0  
4.5  
5.0  
5.5  
6.0  
6.5  
7.0 (m)  
0
(1.6) (3.3) (4.9) (6.6) (8.1) (9.8) (11.5) (13.1) (14.8) (16.4) (18.0) (19.7) (21.3) (23.0)  
(feet)  
Projection Distance  
Height from center of lens to  
bottom edge of the projection  
Center of lens  
Screen Size Width x Height  
Projection Distance  
Height h1  
Height h2  
Screen Size  
Designation (Inches)  
(m)  
(feet)  
(m)  
(feet)  
3.94  
(m)  
(feet)  
2.13  
2.36  
3.51  
4.69  
5.87  
7.02  
8.79  
10.53  
11.71  
(m)  
(feet)  
0.33  
0.36  
0.52  
0.69  
0.85  
1.02  
1.28  
1.54  
1.71  
36"  
40"  
0.74
ן
0.55  
0.81
ן
0.61  
1.22
ן
0.91  
1.63
ן
1.22  
2.02
ן
1.52  
2.44
ן
1.83  
3.05
ן
2.29  
3.66
ן
2.74  
4.06
ן
3.05  
1.20  
1.32  
1.99  
2.65  
3.31  
3.97  
4.97  
5.96  
6.62  
0.65  
0.72  
1.07  
1.43  
1.79  
2.14  
2.68  
3.21  
3.57  
0.10  
0.11  
0.16  
0.21  
0.26  
0.31  
0.39  
0.47  
0.52  
2.43
ן
1.80  
2.66
ן
2.00  
4.00
ן
2.99  
5.35
ן
4.00  
6.63
ן
4.99  
8.00
ן
6.00  
10.00
ן
7.51  
12.00
ן
8.99  
13.32
ן
10.00  
4.33  
60"  
6.53  
80"  
8.69  
100"  
120"  
150"  
180"  
200"  
10.86  
13.02  
16.31  
19.55  
21.72  
* There is a tolerance of ±5% due to design values.  
* This table uses the lens apex and lens center as references and requires that the projec-  
tor be in a horizontal condition (with front and rear adjusters fully withdrawn).  
Download from Www.Somanuals.Eco-m1.7All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
Connecting this unit with a personal computer permits presentation data to be projected as a large  
screen display at conferences, lectures, and on other occasions. Furthermore, connecting this unit to  
a DVD player or other video equipment source in combination with an audio/video amplifier and speaker  
system will allow you to enjoy convincing home theater.  
Connections with PC Connectors  
Please check the following matters before making connections to the  
personal computer.  
* Suitable resolution for V-807 is 800 x 600 dots (S-VGA), and the displayable resolution is XGA (1024 x  
768 dots).  
* Suitable resolution forV-1080 is 1024 x 768 dots (XGA), and the displayable resolution is S-XGA (1280  
x 1024 dots).  
Note that input of a resolution that exceeds the displayable resolution will cease to be projected and  
should this be the case, you will need to change the resolution to a displayable resolution at the  
computer side. Check with "Table of Supported Frequencies" on Page E-70.  
* The setting method of the personal computer will differ depending on the personal computer that you  
are using. For information, read the instruction manual for your personal computer, read the on-line  
help, or contact the manufacturer of your personal computer.  
Personal Computers with a DVI Connector  
* Make the connection with a DVI-D cable and the PC connector of the projector.  
When connecting, arrange the connectors in the proper orientation and plug in. Turn the screw knobs  
and fasten to the connector of the main unit.  
* Switch the input selection of the projector to "Digital RGB".  
Monitor output  
C  
AUDIO VIDEO  
Personal  
computer  
DVI-D cable (Available as an option. Order code: 28-697)  
Note  
This projector uses a 29-pin DVI connector that supports the digital interface. Digital signal TMDS (Transition  
Minimized Differential Signalling) of the DVI (Digital Visual Interface) standard is used.  
Download from Www.Somanuals.Eco-m1.8All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
Personal Computers with a Mini D-Sub 15-Pin Connector  
* Make the connection to the projector's PC connector and the mini D-sub 15-pin connector through the  
use of a DVI/mini D-sub 15-pin conversion cable.  
* When connecting, arrange the connectors in the proper orientation and plug in.Turn the screw knobs  
and fasten to the connector of the main unit.  
* Switch the input selection of the projector to "Analog RGB".  
Personal computer  
PC  
AUDIO VIDEO  
DVI/mini D-sub 15-pin conversion  
cable (Supplied item)  
Monitor output  
RGB signal cable (Supplied item)  
Note  
* Before making connections, check the power of the projector and the equipment to be connected is switched  
off.  
* When projection will be with a notebook computer connected, knowledge will be required for the cable connec-  
tion and notebook computer startup procedure as well as the operation that follows startup. Please consult the  
instruction manual of your notebook computer or the on-line help.  
Download from Www.Somanuals.Eco-m1.9All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
To Output the External Output Signal of a Notebook Computer  
When projection will be with a notebook computer connected, knowledge will be required for the cable  
connection and notebook computer startup procedure as well as the operation that follows notebook  
startup. Please consult the instruction manual of your notebook computer or the on-line help while per-  
forming the following procedure.  
Check whether a signal is being sent from the notebook computer to the projector.  
An indication appearing on the liquid crystal display of the notebook computer does not necessarily  
mean that an external output signal is being output.  
1
Should a sign not be output from the notebook computer, please try the operation described below.  
For an IBM PC/AT, DOS/V computer, press the [Fn] key plus any one of the [F1] to [F12] keys. (See  
the table below.)  
2
Manufacturer  
akia  
Model  
Key  
All computers  
ARMADA Series  
PRESARIO Series  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
All computers  
Fn + F2  
Fn + F4  
Fn + F3  
Fn + F8  
Fn + F10  
Fn + F3  
Fn + F7  
Fn + F3  
Fn + F3  
Fn + F5  
Fn + F7  
Fn + F3  
Fn + F5  
COMPAQ  
DELL  
FUJITSU  
GATEWAY  
IBM  
NEC  
Panasonic  
SHARP  
SONY  
SOTEC  
TOSHIBA  
Note: Table information is current to June 2001.  
Note  
When the liquid crystal display of the notebook computer and the projector are displayed at the same time, the  
projected image might not be correct even though the liquid crystal display shows a correct indication. Should  
this occur, stop the simultaneous display of the notebook computer and try the mode with external output only.  
(Try an operation such as that described in aforementioned Step 2 and try closing the liquid crystal panel which  
might result in external output only.)  
Download from Www.Somanuals.Eco-m2.0All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
Connections with Video Connectors  
Video Equipment with VIDEO Connectors  
* Make the connection to the VIDEO connector of the projector using a video cable.  
* Switch the input selection of the projector to "Video".  
Video Equipment with S-VIDEO Connectors  
* Make the connection to the VIDEO connector of the projector using an S-video cable.  
* Switch the input selection of the projector to "S-Video".  
Video deck, DVD player,  
document camera, etc.  
PC  
AUDIO VIEO  
S-VIDEO  
VIDEO  
S-Video cable (Suppled item)  
Video cable (Supplied item)  
Note  
This projector's video cable and S-video cable are special cables. When purchasing extension cables, please  
contact your dealer.  
Download from Www.Somanuals.Eco-m2.1All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
Connections with Component Signals  
When the Video Connectors are Y, Cb, and Cr Connectors  
* Make the connection to the projector's VIDEO connector using a component signal cable.  
* Switch the input selection of the projector to "YCbCr".  
When the Video Connectors are Y, Pb, and Pr Connectors  
* Connect a DVI/mini D-sub 15-pin conversion cable to the PC connector of the projector, then make a  
further connection using a component cable (which is available as an option).  
* Switch the input selection of the projector to "YPbPr".  
Component cable (Available as an option)  
(3.5 mm diameter, 4 Pde, Plug to RCA
ן
3)  
(Order code: 28-698)  
Green  
Blue  
Red  
C  
AUDIO VIDEO  
Y
Cb  
Cr  
COMPONENT  
DVD player, HD video  
deck, etc.  
DVI/mini D-sub 15-pin conversion  
cable (Supplied item)  
COMPONENT  
Pb  
Y
Pr  
Blue  
Green  
Red  
Component cable (Available as an option)  
(D-sub 15-pin to RCA
ן
3)  
(Order code: 28-690)  
Note  
YCbCr cannot accept the input of signals other than NTSC 3.58 and PAL.  
Download from Www.Somanuals.Eco-m2.2All Manuals Search And Download.  
Connecting Personal Computers and Video Equipment  
Connections with Audio Connectors  
* Make the connection to the projector's AUDIO jack using an audio cable.  
* The built-in speaker of the projector provides monaural audio.  
* To enjoy convincing audio reproduction, please connect the audio output of the video equipment to  
your audio system.  
Video equipment, personal computer  
PC  
AUO VIDEO  
AUDIO  
L
R
White  
Red  
Audio cable (Supplied item)  
Note  
The AUDIO jack of the projector is a 2.5 mm diameter stereo mini jack. Connection is not possible using the  
common (3.5 mm diameter) stereo mini jack cable from the headphone jack of the personal computer or video  
equipment.  
Download from Www.Somanuals.Eco-m2.3All Manuals Search And Download.  
Power Cable Connections and Switching the Power On/Off  
There is an order in which the power cable is connected and the power is switched on/off.  
Operating  
Connect the AC IN connector of the projector and the power outlet using the sup-  
plied power cable.  
The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will enter  
1
the standby mode.  
STATUS  
POWER  
Lit amber  
S
TA  
TUS  
P
O
W
ER  
POWER  
MENU  
To wall outlet  
SOURCE  
QUICK  
MENU  
AUTO  
AU  
D
IO  
Firmly plug in all the way.  
VIDE  
O
P
C
Switch on the projector power  
Main unit operation: Press and hold the POWER button for a while.  
Remote control operation: Press the POWER ON button.  
2
3
STATUS  
STATUS  
STATUS  
POWER  
POWER  
POWER  
ON  
OFF  
POWER  
Lit green  
Power is on  
Flashes green  
(Approximately 60  
seconds)  
POWER  
The POWER indicator changes to a flashing green and lights steadily after about 60 seconds.  
The projection screen brightens after about 40 seconds.  
The projector is now capable of regular projection.  
Switch on the power of the connected equipment  
Note  
When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so  
that it may be reached easily.  
Download from Www.Somanuals.Eco-m2.4All Manuals Search And Download.  
Power Cable Connections and Switching the Power On/Off  
Finishing  
1
Switch off the power of the connected equipment  
Switch off the power of the projector  
Main unit operation: Press and hold the POWER button for a while.  
Remote control operation: Press the POWER OFF button.  
2
ON  
OFF  
POWER  
The "Power Off" indication will appear.  
When the red bar extends fully (in about 5 sec-  
onds), the projection screen will go off and the  
unit will enter the power off operation.  
Power Off  
OK  
?
Note  
* The operation can be cancelled by pressing a but-  
ton other than the POWER button.  
* One more press of the POWER (POWER OFF)  
button will switch off the power.  
Power Off  
OK  
?
STATUS  
STATUS  
STATUS  
POWER  
POWER  
POWER  
The POWER indicator changes to flashing am-  
ber and lights a steady amber after about 60 sec-  
onds (when the unit enters the standby mode).  
Lit amber  
Standby  
mode  
Flashes amber  
(Approximately 60  
seconds)  
POWER  
Unplug the power cable  
Check that the POWER indicator is lit in amber and then unplug the power cable.  
The POWER indicator will go off when the power cable is unplugged.  
3
Warrning  
Under normal circumstances, please do not unplug the power cable unless the POWER indicator  
is lit in amber. Doing so may shorten the life of the lamp or result in breakdown of the projector.  
Do not unplug the power cable while the POWER indicator is flashing amber. Doing so may  
shorten the life of the lamp or damage the projector.  
Download from Www.Somanuals.Eco-m2.5All Manuals Search And Download.  
Adjustment of the Projection Screen  
Switch on the power of the connected equipment and make the adjustments with the video signal  
being input to the projector.  
Projection Screen Position Adjustment  
Adjust the projection image to the screen.  
Check that the screen is set level and vertically.  
(1) If the image is shifted to the left or right, move the main unit horizontally. (Align the center of the  
screen and the center of the lens of the main unit.)  
(2) If the image is shifted vertically, move the image up or down with the adjuster. See "Making Adjust-  
ments with the Adjusters" on Page E-27.  
(3) If the image is slanted, adjust by turning the right or left front adjuster. See "Making Adjustments with  
the Adjusters" on Page E-27.  
(4) A projection image such as that illustrated in the diagram is the result of the projector not being  
perpendicular to the screen. Set the projector so that it is pointing straight toward the screen.  
(5) If the image shows keystone distortion, adjust using remote control or menu operations. See "Cor-  
recting Keystone Distortion of the Projection Image" on Page E-34.  
(3)  
(1)  
(2)  
(4)  
(5)  
Note  
The projection image can be turned upside down or turned left to right using menu operations. See "Projection" on  
Page E-52.  
Download from Www.Somanuals.Eco-m2.6All Manuals Search And Download.  
Adjustment of the Projection Screen  
Making Adjustments with the Adjusters  
Care must be taken not to come into  
contact with the ventilation slots which  
discharge the heat of the lamp.  
Raising the projection image  
While viewing the projection im-  
age, press hand hold the front ad-  
juster buttons located at the left  
and right (1) and, raise the projec-  
tor to align the image with the  
screen, then release your fingers  
(2).  
A U T O  
M E N U  
Q U I C K  
S O U R C E  
M E N U  
P O W E R  
R
E
W
O
P
S
T U  
T A  
S
( )  
1
Turn the left and right front adjust-  
ers for fine adjustment.  
Adjust so that there is no shaking  
of the projector.  
( )  
2
( )  
1
Lowering the projection image  
Lower the front adjusters using the  
operation described above.  
Raise the rear adjuster. Turn the  
left and right front adjusters to  
make fine adjustments.  
ST  
A
TU  
S
PO  
W
E
R
P
O
W
E
R
M
E
N
U
SOURCE  
Q
U
M
IC  
E
A
U
T
O
N
U
K
AUDIO  
VIDEO  
Adjust so that there is no shaking  
of the projector.  
PC  
Rear adjuster  
Focus Adjustment  
Turn the focus ring to the right or left and adjust  
the focus.  
Should the size of the projection image extend be-  
yond the screen or be smaller than the screen, move  
the projector forward or backward and readjust the  
focus.  
Download from Www.Somanuals.Eco-m2.7All Manuals Search And Download.  
General Operation  
This section describes the use of direct operation with the main unit or remote control buttons.  
For information about operation using the menu, see "Menu Operation Method" on Page E-37 and  
the various items on Pages E-46 to E-60.  
Input Selection  
This operation selects the input signal to be projected.  
MENU  
Main unit operation: Press the SOURCE button.  
(It will not function while the menu or the quick menu is displayed.)  
When Auto Source is On  
AUTO  
SOURCE  
If there is no input signal at the source that was previously used,  
the projector automatically selects another source that has the  
next input signal.  
QUICK  
MENU  
When Auto Source is Off  
Each press of the button switches the selection one step in the  
sequence of Analog RGB YPbPr Digital RGB VIDEO →  
S-VIDEO YCbCr.  
ON  
POWER  
MUTE  
OFF  
PIP  
FREEZE  
DIGITAL  
VIDEO  
QUICK  
Remote control operation: Press the desired input se-  
lection button.  
RGB  
YPbPr  
YCbCr  
AUTO  
S-VIDEO  
ASPECT  
When Auto Source is On  
When an input signal is not present at the selected source, the  
projector automatically selects the next source that has an input  
signal.  
When Auto Source is Off  
The projector switches to the selected source regardless of  
whether an input signal is present.  
Note  
* When you do not operate source selection, the projector will assume the input selection condition that was  
previously used.  
* See "Auto Source" on Page E-55 for information about the Auto Source on and off conditions.  
* YPbPr input selection will not be possible when YPbPr is set invalidly. See "YPbPr" on Page E-57.  
Download from Www.Somanuals.Eco-m2.8All Manuals Search And Download.  
General Operation  
Automatic Adjustment of Analog RGB  
This function automatically adjusts the position shift of the analog  
RGB input signal, the size of the picture, vertical striping, and  
color infidelity.  
MENU  
Normally, this function is adjusted automatically at the time of sig-  
nal selection.  
AUTO  
SOURCE  
Main unit operation/Remote control operation: Press the  
AUTO button. (This will not function while the menu or the quick  
menu is displayed.)  
QUICK  
MENU  
A press of the AUTO button starts the automatic adjustment.  
ON  
POWER  
MUTE  
OFF  
PIP  
FREEZE  
DIGITAL  
VIDEO  
QUICK  
RGB  
YPbPr  
YCbCr  
AUTO  
S-VIDEO  
ASPECT  
Note  
* If the display position is shifted, vertical lines appear on the picture, or the projection is not good even after  
using automatic adjustment, please perform image adjustment manually. See "Picture Adj. / Fine Picture / H  
Position / V Position " on Page E-47.  
* When the image extends beyond the boundaries of the screen or is smaller than the screen, set Aspect to  
"Auto". See "Selection of Aspect Ratio" on Page E-30 and "Aspect" on Page E-51.  
Download from Www.Somanuals.Eco-m2.9All Manuals Search And Download.  
General Operation  
Selection of Aspect Ratio  
This function selects horizontal and vertical picture propor-  
tions of the input signal.  
Press the ASPECT button while viewing the projected image  
and select the aspect ratio.  
Personal Computer Image  
(when selecting digital RGB or analog RGB)  
Each press of the ASPECT button advances the selection one  
step in the sequence of Auto Direct Real, and then repeats.  
DIGITAL  
VIDEO  
QUICK  
RGB  
YPbPr  
YCbCr  
AUTO  
S-VIDEO  
ASPECT  
Auto............ Automatically enlarges or reduces the image to project a  
full screen in a ratio of 4:3  
Direct .......... Maintains the aspect ratio and projects a picture of the maxi-  
mum displayable size  
CANCEL  
MENU  
Real ............ Projects the input signal without pixel conversion  
Image of the Video Equipment  
(when selecting VIDEO, S-VIDEO, YCbCr, or YPbPr)  
Each press of the ASPECT button advances the selection one  
step in the sequence of Auto Wide Zoom, and then repeats.  
Auto............ While maintaining the aspect ratio, projects a full screen so  
that no portions extend beyond the boundaries of the screen.  
The top and bottom of the 16:9 image becomes black.  
Wide ........... Projects to fill the full width with the entire image at 16:9.  
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the  
screen.  
Note  
Please note that using this monitor for the purpose of commercial gain or the attraction of public attention in a  
venue such as a coffee shop or hotel and projecting a 4:3 screen in wide mode or leaving a squeezed screen as a  
compressed image raises concern about the infringement of copyright rights which are protected by copyright  
law.  
Download from Www.Somanuals.Eco-m3.0All Manuals Search And Download.  
General Operation  
Projecting a Sub-Picture  
Sub-picture  
This function displays the video image (i.e., the picture of the  
VIDEO connector input) on the personal computer screen (i.e.,  
the PC connector input screen) as a sub-picture.  
Each press of the PIP button advances the screen size of the  
sub-picture one step in the sequence of Small Medium →  
Large Off (i.e., the sub-picture display is off), and then re-  
peats.  
Main-picture  
Note  
* The sub-picture cannot be displayed when the main screen receives  
the image from the VIDEO connector.  
* The sub-picture cannot be displayed when picture in picture is set  
to off. The size of the sub-picture can be selected. See "Using the  
Quick Menu" on Page 32 and "Picture in Picture" on Page E-54.  
* To change the display position of the sub-picture, see "Picture in  
Picture" on Page E-54.  
* The main picture is termed the Analog RGB, Digital RGB, or YPbPr  
input screen, whereas the sub-picture is termed the VIDEO, S-VIDEO,  
and YCbCr input screen.  
ON  
POWER  
MUTE  
OFF  
PIP  
FREEZE  
DIGITAL  
VIDEO  
QUICK  
RGB  
YPbPr  
YCbCr  
AUTO  
S-VIDEO  
ASPECT  
Freezing a Moving Picture  
This function is used to stop and view a moving picture. Note that  
the input image continues to advance even though the picture  
there is a still picture condition.  
ON  
POWER  
MUTE  
OFF  
PIP  
FREEZE  
DIGITAL  
VIDEO  
QUICK  
A press of the FREEZE button changes the screen to a still  
picture. A further press returns the screen to a moving pic-  
ture.  
RGB  
YPbPr  
YCbCr  
AUTO  
S-VIDEO  
ASPECT  
Note  
During a picture in picture display, both the main picture and the sub-  
picture become still pictures.  
Cancelling Video and Audio Temporarily  
This function is used to cancel the video and audio at the same  
time.  
ON  
POWER  
MUTE  
OFF  
PIP  
FREEZE  
DIGITAL  
VIDEO  
Press the MUTE button to cancel the video and the audio.  
A further press brings a return to the original condition.  
RGB  
YPbPr  
YCbCr  
S-VIDEO  
Download from Www.Somanuals.Eco-m3.1All Manuals Search And Download.  
General Operation  
Using the Quick Menu  
This function permits frequently used adjustments to  
be performed quickly.  
Note that the Quick Menu will not be displayed unless the signal  
of the connected equipment is input. Please select the input that  
you wish to adjust.  
MENU  
Main unit operation  
(1) A press of the QUICK MENU button brings up the quick ad-  
justment display. Further presses allow selection of the de-  
sired adjustment display.  
(2) Press the  
or  
button to make the adjustment.  
AUTO  
SOURCE  
(3) To close the display immediately, press the MENU button.  
In the absence of operations for a period of about 10 sec-  
onds, the display will close automatically.  
QUICK  
MENU  
(1)  
(3)  
Remote control operation  
(1) A press of the QUICK MENU button brings up the quick ad-  
justment display. Further presses cause the adjustment dis-  
play to change in sequence.  
QUICK  
ASPECT  
AUTO  
The adjustment display can be selected with use of either the  
cursor or button.  
CANCEL  
MENU  
(2) Press the cursor or button to make the adjustment.  
(3) To close the display immediately, press the CANCEL button.  
In the absence of operations for a period of about 10 sec-  
onds, the display will close automatically.  
ENTER  
HKSTN  
(2)  
VKSTN  
Download from Www.Somanuals.Eco-m3.2All Manuals Search And Download.  
General Operation  
Content of Adjustments and Settings  
Example: Brightness adjustment display  
+
Brightness  
0
Display Item  
Adjustment/Setting  
Brightness  
Contrast  
Adjusts the brightness of the image.  
Brightness decreases in the (-) direction and increases in the (+) direction.  
Adjusts the contrast of the image.  
Contrast becomes less distinct in the (-) direction and more pronounced in the  
(+) direction.  
V Keystone  
H Keystone  
Corrects (vertical) keystone distortion of the screen.  
Adjusts the left and right edges of the screen so that they are parallel.  
Corrects (horizontal) keystone distortion of the screen.  
Adjusts the up and down edges of the screen so that they are parallel.  
Picture in Picture  
The picture from the VIDEO jack is displayed as a sub-picture on the input  
screen from the PC connector.  
This function selects either the size of the sub-picture (i.e., large, medium, or  
small) or off (i.e., no display). (Neither the adjustment display nor the picture will  
be output unless the signal is input to the PC connector.) See Page E-54 for  
information about changing the display position of the sub-picture.  
Volume  
This function adjusts the volume of the built-in speaker.  
The volume decreases in the (-) direction and increases in the (+) direction.  
Download from Www.Somanuals.Eco-m3.3All Manuals Search And Download.  
General Operation  
Correcting Keystone Distortion of the Projection Screen  
This adjustment is used when the projection screen is dis-  
torted.  
(3)  
Note that extreme distortion cannot be corrected and in such cir-  
cumstances the projector should be placed to face the screen  
straight on beforehand.  
CANCEL  
MENU  
ENTER  
HKSTN  
ZOOM  
VKSTN  
(1)  
(1)  
VOL  
(2)  
Adjustment Method  
(1) To adjust up-down distortion (e.g., Screen Example 1), press  
the HKSTN button. The horizontal keystone adjustment dis-  
play will appear.  
Screen Example 1  
+
V Keystone  
0
To adjust left-right distortion (e.g., Screen Example 2), press  
the VKSTN button. The vertical keystone adjustment display  
will appear.  
+
H Keystone  
0
Screen Example 2  
(2) While viewing the screen, press the (+) button or the (-) but-  
ton and adjust the vertical or horizontal edges to be parallel.  
In Screen Example 3, horizontal and vertical keystone distor-  
tion should be adjusted.  
(3) To close the display immediately, press the CANCEL button.  
In the absence of operations for a period of about 10 sec-  
onds, the display will close automatically.  
Screen Example 3  
Note  
* The keystone adjustment values can be overwritten and saved. See "Keystone" on Page E-53.  
* Overcompensation of the horizontal keystone correction value will result in a narrowing of the vertical keystone  
adjustment range. Likewise, overcompensation of the vertical keystone correction value results in a narrowed  
horizontal adjustment range.  
* Note that the adjustment range will differ depending on the adjustment conditions.  
* The screen examples have been depicted in an exaggerated form to aid in description.  
Download from Www.Somanuals.Eco-m3.4All Manuals Search And Download.  
General Operation  
Enlargement of the Image and Video Movement  
This function digitally enlarges the personal computer image and  
video image (up to 10 times).  
(3)  
(4)  
(1) Press the ZOOM button.  
The zoom selection display will appear.  
CANCEL  
MENU  
+
Zoom  
21  
ENTER  
(2) Enlarge to the desired size.  
HKSTN  
ZOOM  
Each press of the (+) button enlarges the image and each  
press of the (-) button makes the image smaller (returning it  
to 1:1).  
VKSTN  
VOL  
ᮤ ᮣ  
(3) Pressing the cursor (●●  
) buttons at the time of the zoom  
(2)  
operation will cause the display position to move.  
(There will not be any movement when zoom is at 0.)  
(1)  
(4) To close the display immediately, press the CANCEL button.  
In the absence of operations for a period of about 10 sec-  
onds, the display will close automatically.  
(1)  
(2)  
(3)  
(No enlargement)  
(Approximately 2 times enlargement)  
(Movement)  
The image can also be moved in the following circumstances.  
*
When "Aspect" is set to "Real" by the signal of the personal computer, and the input resolution is  
higher than the display resolution of the projector.  
*
When "Aspect" is set to "Zoom" by the video signal.  
Note  
* Zoom and image movement functions are cancelled when the input is switched.  
* The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are  
being digitally corrected so that they are not conspicuous.  
* Movement of the screen will not be possible when the menu screen is being displayed.  
Download from Www.Somanuals.Eco-m3.5All Manuals Search And Download.  
General Operation  
Adjustment of the Volume  
This function adjusts the volume of the built-in speaker.  
(3)  
(1) Press the VOL button.  
CANCEL  
The volume adjustment display will appear.  
MENU  
+
Volume  
53  
ENTER  
HKSTN  
ZOOM  
(2) Adjust the volume.  
VKSTN  
VOL  
The (+) button increases the volume and the (-) button de-  
creases the volume.  
(3) To close the display immediately, press the CANCEL button.  
In the absence of operations for a period of about 10 sec-  
onds, the display will close automatically.  
(2)  
(1)  
Download from Www.Somanuals.Eco-m3.6All Manuals Search And Download.  
Menu Operation Method  
This section describes only the menu operation method. Please see this page should you need infor-  
mation while performing menu operations.  
For information about a menu function, adjustment, or setting, please see one of the pages containing  
such descriptions.  
Adjustments and settings are made by projecting an image and adjusting to an optimum condition.  
The remote control should be pointed toward the remote control sensor of the projector and operated.  
To return the various items that have been changed via the menu to their standard values (i.e., default  
values at time of shipping from the factory), see "Factory Default" on Page E-59. (Some items will not  
return to their initial values.)  
The adjustment/setting items and contents will differ depending on the input selection and the adjust-  
ment/setting items that can be used with the input signal are displayed on the menu.  
Names and Functions of the Parts  
Names and Functions of the Remote Control Buttons that Operate Via a  
Menu  
MENU button  
Used for menu display and menu closure.  
ON  
POWER  
MUTE  
OFF  
PIP  
ᮤ ᮣ  
Cursor (●●  
FREEZE  
DIGITAL  
VIDEO  
QUICK  
) buttons  
Used in the selection of menu names and item names as  
well as in setting and adjusting the item contents.  
RGB  
YPbPr  
YCbCr  
AUTO  
S-VIDEO  
ASPECT  
CANCEL button  
Used to return to menu name selection as well as to close  
the menu (and the sub menu display).  
ENTER  
ENTER button  
Used to set the verification display.  
ZOOM  
VOL  
Download from Www.Somanuals.Eco-m3.7All Manuals Search And Download.  
Menu Operation Method  
Names and Functions of the Main Unit Buttons Used in Menu Operation  
MENU button  
Used to display menus, to return to menu name selections, and  
to close menus (i.e., closing sub menu displays).  
STATUS  
POWER  
MENU  
(AUTO) button  
Advances the selection of menu names. Advances the setting/  
adjustment values of the item contents.  
SOURCE  
POWER  
AUTO  
Also serves the function of the remote control ENTER button.  
QUICK  
MENU  
(QUICK MENU) button  
Used in the selection of item names.  
(SOURCE) button  
Returns to the selection of menu names. Advances the setting/  
adjustment values of the item contents.  
Names and Functions of Menu Screen Parts  
Menu Names  
Cursor (dark blue)  
These are the menu titles. When a menu is selected,  
the display changes to the title screen. The selected  
menu name appears in red.  
The setting/adjustment of the cursor  
position can be performed.  
Image  
Color  
View  
Setup  
Info.  
Aspect  
Auto  
3
Item Name  
Filter  
The name of the ad-  
justment/setting  
Projection  
Key
+
V Keystone  
0
+
H Keystone  
0
Sub Menu  
Off  
Keystone Save  
Adjustment bar setting contents  
Adjustment bar:Indicates the adjustment condition by  
increases or decreases in bar length  
Setting contents: Displays the set contents  
Icon: Displays the sub menu or setting contents  
Download from Www.Somanuals.Eco-m3.8All Manuals Search And Download.  
Menu Operation Method  
Performing Menu Operations  
The menu operations of the main unit buttons differ from those of the remote control buttons.  
When both the main unit and remote control button operations are the same, the operation is de-  
scribed under the remote control operation; however, only when different, the operation will also be  
described under "Main unit operation".  
When a signal is not being input, only “Color”, "Setup" and "Info." can be selected.  
("Color" can be selected for Video and S-Video source only.)  
When a button is pressed and the next button operation is not entered within 30 seconds, the menu  
display will close.  
Adjustment and settings values will be maintained in storage even when the power has been switched  
off or the power plug has been disconnected.  
(Note that some items are not stored.)  
Preparation Switch on the power of the connected equipment, start the play operation or an-  
other operation, and input the signal to the projector.  
Select the input that you wish to adjust.  
The menu display of the description diagram depicts an example in which the "H Key-  
stone" item name is selected.  
Menu Display  
1
Press the MENU button to display the menu  
Image  
Color  
View  
Setup  
Info.  
CANCEL  
MENU  
+
+
+
+
+
Brightness  
Contrast  
Color  
0
0
0
0
0
ENTER  
Tint  
Sharpness  
Reset  
HKSTN  
VKSTN  
The menu name that existed when the menu was closed previously will be displayed.  
Note  
A press of the main unit MENU button will change the function of the SOURCE button, AUTO button, and  
QUICK MENU button to that of cursor buttons.  
Download from Www.Somanuals.Eco-m3.9All Manuals Search And Download.  
Menu Operation Method  
Selection of the Menu Name  
2
ᮤ ᮣ  
Press the cursor (  
) button to select the menu name  
Red  
CANCEL  
MENU  
Image  
Color  
View  
Setup  
Info.  
ENTER  
Aspect  
Auto  
3
Filter  
Projection  
Keystone  
HKSTN  
VKSTN  
Each press of the cursor ( ) button advances the selection one step in the sequence of "Color" →  
"View" "Setup" "Info." "Image". Each press of the cursor ( ) button causes a return of one  
step.  
The selected menu name will appear in red.  
Note  
At the time of menu name selection, check that the item name cursor is not being displayed.  
To cancel the display of the cursor, press the CANCEL button on the remote control or the MENU button on  
the main unit.  
Displaying the Cursor  
3
Press the cursor () button to display the cursor  
Cursor: Dark blue  
CANCEL  
MENU  
Image  
Color  
View  
Setup  
Info.  
ENTER  
Aspect  
Filter  
Auto  
3
Projection  
Keystone  
HKSTN  
VKSTN  
Thisconditionallowsselectionofthe  
item name.  
Download from Www.Somanuals.Eco-m4.0All Manuals Search And Download.  
Menu Operation Method  
Selection of the Item Name  
4
Press the cursor (●●) button to align the cursor with the item name  
CANCEL  
MENU  
Image  
Color  
View  
Setup  
Info.  
ENTER  
Aspect  
Auto  
3
Filter  
Projection  
Keystone  
HKSTN  
VKSTN  
Main unit operation: Press the (QUICK MENU) button. When the cursor has moved to the very  
bottom of the items, another press will move it to the very top of the items.  
Press the cursor ( ) button since the "Key-  
stone" example of the description diagram  
Image  
Color  
View  
Setup  
Info.  
Aspect  
Filter  
Auto  
3
displays the  
displayed.  
icon. The sub menu will be  
Projection  
Press the cursor () button and align the cur-  
sor with the desired item name.  
+
Key
V Keystone  
0
+
H Keystone  
0
When the  
icon is displayed and depend-  
Off  
Keystone Save  
ing on the item contents, a press of the cur-  
sor ( ) button will result in the setting display,  
a resetting of the adjustment value, or a re-  
setting verification display.Please see the vari-  
ous item descriptions.  
Making Adjustments/Settings  
5
ᮤ ᮣ  
Press the cursor (  
) button and make the adjustment (or setting)  
while viewing the image  
When a button is pressed, the image will also change.  
Image  
Color  
View  
Setup  
Info.  
CANCEL  
MENU  
HKSTN  
Aspect  
Filter  
Auto  
3
ENTER  
Projection  
+
Key
V Keystone  
0
+
H Keystone  
0
VKSTN  
Off  
Keystone Save  
Adjustment display: Each press of the button results in a change of 1 point and continued presses  
cause changes to proceed in order.  
Setting display: The setting contents display changes with each press of the button.  
Download from Www.Somanuals.Eco-m4.1All Manuals Search And Download.  
Menu Operation Method  
Closing the Menu  
6
Press the MENU button and close the menu display  
CANCEL  
MENU  
ENTER  
HKSTN  
VKSTN  
Main unit operation: Press the MENU button and cancel the cursor display.  
When a sub menu is displayed, press the MENU button to close the sub menu, then press again to  
cancel the cursor. This condition allows the menu name to be selected.  
MENU  
Image  
Color  
View  
Setup  
Info.  
Aspect  
Filter  
Auto  
Cursor  
3
Projection  
Keystone  
SOURCE  
AUTO  
QUICK  
MENU  
Image  
Color  
View  
Setup  
Info.  
A press of the MENU button while the  
cursor is not displayed will close the menu  
display.  
Aspect  
Auto  
3
Filter  
Projection  
Keystone  
Download from Www.Somanuals.Eco-m4.2All Manuals Search And Download.  
Menu Operation Method  
Selecting Another Menu Name with Remote Control Operation  
When a sub menu is displayed, press the CAN-  
CEL button and close the sub menu.  
Press the CANCEL button again and cancel the  
cursor display.  
Image  
Image  
Image  
Color  
View  
View  
View  
Setup  
Info.  
Aspect  
Filter  
Auto  
3
Projection  
Keystone  
CANCEL  
MENU  
Color  
Setup  
Info.  
ENTER  
Aspect  
Auto  
3
Filter  
HKSTN  
VKSTN  
Projection  
Keystone  
ᮤ ᮣ  
Press the cursor (  
) button and select the menu  
Color  
Setup  
Info.  
name. (Selection of the menu name is not pos-  
sible while the cursor is displayed.)  
+
+
+
+
+
Brightness  
Contrast  
Color  
0
0
0
0
0
Tint  
Sharpness  
Reset  
CANCEL  
MENU  
ENTER  
HKSTN  
VKSTN  
Note  
A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press  
of the MENU button while the quick menu is displayed will close the quick menu and display the menu.  
Download from Www.Somanuals.Eco-m4.3All Manuals Search And Download.  
Menu Operation Method  
List of Item Names Offering Input Selection and Adjustments/Settings  
The item names that can be adjusted/set will differ depending on the input signal.  
[Example of Menu Display Items at the Time of Input Signal Video Selection]  
Image  
Color  
View  
Setup  
Info.  
Aspect  
Filter  
Auto  
3
Projection  
+
Keys
V Keystone  
0
+
H Keystone  
0
Off  
Keystone Save  
Input Signal  
Sub Menu Item  
Name  
Reference  
Menu Name  
Item Name  
Page  
AnalogDRigGitBal RGB  
Video S-Video  
YPbPrYCbCr  
E-46  
Brightness  
E-46  
E-47  
E-47  
E-47  
E-47  
E-46  
E-46  
E-46  
E-48  
E-49  
E-49  
E-50  
E-50  
E-51  
E-52  
E-52  
E-52  
E-53  
E-53  
E-54  
E-54  
E-54  
Contrast  
Picture Adj.  
Fine Picture  
H Position  
V Position  
Color  
Image  
Tint  
Sharpness  
Reset  
Gamma  
Color Temp.  
Color System  
Color Space  
Aspect  
Color  
View  
Filter  
Projection  
Vertical Flip  
Horizontal Flip  
V Keystone  
H Keystone  
Keystone Save  
Size  
Keystone  
Picture in Picture  
Position  
"Tint" can be adjusted only at the time of NTSC composite/S signal input.  
Download from Www.Somanuals.Eco-m4.4All Manuals Search And Download.  
Menu Operation Method  
[Example of Menu Display Items at the Time of Input Signal Video Selection]  
Image  
Color  
View  
Setup  
Info.  
Language  
Auto Source  
Auto Power Off  
On Screen  
Menu Position  
YPbPr  
On  
Off  
On  
Disable  
Black  
Background  
Input Signal  
Sub Menu Item  
Name  
Reference  
Page  
E-55  
Menu Name  
Setup  
Item Name  
AnalogDRigGitBal RGB  
Video S-Video  
YPbPrYCbCr  
Language  
E-55  
E-56  
E-56  
E-57  
E-57  
E-57  
E-58  
E-59  
E-59  
E-59  
E-60  
E-60  
E-60  
Auto Source  
Auto Power Off  
On Screen  
Menu Position  
YPbPr  
Background  
White Balance  
Status  
Factory Default  
Lamp Timer Reset  
Resolution  
Info.  
Frequency  
Lamp Timer  
Download from Www.Somanuals.Eco-m4.5All Manuals Search And Download.  
Picture  
Perform this operation while projecting the picture for which the adjustment/setting will be made.  
Select the menu name "Picture".  
See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations.  
The item name display will differ depending on the input signal. See "List of Item Names Offering Input  
Selection and Adjustments/Settings" on Pages E-44 and E-45.  
Brightness / Contrast / Color / Tint / Sharpness  
Picture qualities such as brightness and contrast will  
change depending on the whether the room is bright or  
dark. Please adjust to suit your preference.  
+
+
+
+
+
Brightness  
Contrast  
Color  
0
0
0
0
0
Tint  
Select the desired item name and then adjust with the cursor  
Sharpness  
Reset  
ᮤ ᮣ  
(
) buttons.  
Cursor ( ) Button  
Cursor ( ) Button  
Item Name  
Brightness  
Contrast  
Color  
Brighter  
Darker  
More contrast  
Denser color  
More green  
Less contrast  
Less dense color  
More red  
Tint  
Sharper image  
Sharpness  
Softer image  
Note  
* The adjustment values of the adjustable items are stored according to input source.  
* "Tint" can be adjusted only at the time of NTSC composite/S signal input.  
Download from Www.Somanuals.Eco-m4.6All Manuals Search And Download.  
Picture  
Picture Adj. / Fine Picture / H Position / V Position  
These adjustments are available when analog RGB signals  
are input.  
Usually, automatic adjustment is performed at the time of sig-  
nal selection, but when automatic adjustment is not effec-  
+
+
+
+
+
+
Brightness  
0
0
Contrast  
Picture Adj.  
-32  
26  
0
Fine Picture  
tive, these adjustments can be performed.  
H Position  
V Position  
Reset  
0
Note  
When the image extends beyond the boundaries of the screen or  
is smaller than the screen, check that the "View" "Aspect" set-  
ting is set to "Auto". See "Aspect" on Page E-51.  
Picture Adj. (Picture Adjustment)  
Adjust this when bright and dark vertical bands appear on the  
screen.  
Select the "Picture Adj." item name and adjust with the cursor  
ᮤ ᮣ  
(
) buttons so that the vertical bands disappear and bright-  
ness becomes uniform across the screen.  
Fine Picture  
Adjust this when the picture shows a lack of color fidelity or  
flickering.  
Select the "Fine Picture" item name and adjust with the cur-  
ᮤ ᮣ  
sor (  
) buttons so that the lack of color fidelity or the flicker-  
ing disappears.  
Download from Www.Somanuals.Eco-m4.7All Manuals Search And Download.  
Picture  
H Position  
Adjust this when the picture is shifted to the left or right.  
Select the "H Position" item name and adjust with the cursor  
ᮤ ᮣ  
(
) buttons.  
V Position  
Adjust this when the picture is shifted up or down.  
Select the "V Position" item name and adjust with the cursor  
ᮤ ᮣ  
(
) buttons.  
Reset  
This function resets (i.e., returns to the standard settings)  
the adjustment/setting value of the "Image" menu name.  
+
+
+
+
+
Brightness  
Contrast  
Color  
0
0
0
0
0
A press of the cursor ( ) button forces the reset.  
Tint  
Sharpness  
Reset  
Note  
* The item name "Fine Picture" at the time of analog RGB input will not be reset.  
* "Reset" of the menu name "Image" can be reset for each input source.  
* To reset the adjustments/settings of all the menu items (while noting that there are some items that cannot be  
reset), see "Factory Default" on Page E-59.  
Download from Www.Somanuals.Eco-m4.8All Manuals Search And Download.  
Color  
Select the menu name "Color".  
See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations.  
The item name display will differ depending on the input signal. See "List of Item Names Offering Input  
Selection and Adjustments/Settings" on Pages E-44 and E-45.  
Gamma  
Gamma corrects the proportion of change of the dark por-  
tions from the bright portions of the input signal.  
Set this to reproduce natural color tone or to distinctly project  
a personal computer picture in a bright conference room.  
Select the "Gamma" item name and select the setting contents  
Gamma  
Normal  
Normal  
Auto  
ᮤ ᮣ  
with the cursor (  
) buttons.  
Color Temp.  
Color System  
Normal ....... Correction with standard settings  
Natural ........ Corrects for natural color tones  
Real ............ Corrects with emphasis on brightness  
Color Temp.  
The screen color is affected by the color of the illumination  
and other extraneous light.  
This function adjusts the white, which is the reference color  
for video equipment, and improves the quality of color repro-  
duction. Adjustment can also be used to enhance skin col-  
ors.  
Select the item name "Color Temp." and select the setting con-  
Gamma  
Normal  
Normal  
Auto  
ᮤ ᮣ  
tents with the cursor (  
) buttons.  
Color Temp.  
Color System  
Low ............ Produces warm whites (reddish)  
Medium ...... Produces warm whites (yellowish)  
Normal ....... Produces the white of sunlight  
High............ Produces cool whites (bluish)  
Download from Www.Somanuals.Eco-m4.9All Manuals Search And Download.  
Color  
Color System  
This function sets the color system of the video signal.  
Normally, this should be set to Auto. Set this function when  
the system cannot be identified with Auto.  
Select item name "Color System" and select the setting contents  
ᮤ ᮣ  
with the cursor (  
) buttons.  
Gamma  
Normal  
Normal  
Auto  
Color Temp.  
Color System  
Auto............ Automatic identification  
NTSC .......... Fixes the setting to NTSC  
PAL ............. Fixes the setting to PAL  
SECAM ....... Fixes the setting to SECAM  
Color Space  
Set this function when a component signal (YCbCr orYPbPr)  
is projected and the image is extremely red or extremely  
green.  
ᮤ ᮣ  
Select the item name "Color Space" and use the cursor (  
)
Gamma  
Normal  
Normal  
Auto  
buttons to select a color space setting that provides a normal im-  
age.  
Color Temp.  
Color System  
Color Space  
YCbCr601  
Selection contents at the time ofYCbCr input  
YCbCr601, YCbCr709, YCbCrSMPT  
Gamma  
Normal  
Normal  
Color Temp.  
Color Space  
YPbPr601  
Selection contents at the time ofYPbPr input  
YPbPr601, YPbPr709, YPbPrSMPT  
Note  
* When the component signal undergoes conversion processing to red, green, and blue which express the image  
of the projector, the correct color cannot be reproduced unless a system compliant with the color difference  
conversion system of the input signal is used. Color Space serves to make this selection.  
Download from Www.Somanuals.Eco-m5.0All Manuals Search And Download.  
View  
Perform this operation while projecting the picture for which the adjustment/setting will be made.  
Select the menu name "View".  
See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations.  
The item name display will differ depending on the input signal. See "List of Item Names Offering Input  
Selection and Adjustments/Settings" on Pages E-44 and E-45.  
Aspect  
This function sets the horizontal and vertical picture propor-  
Aspect  
Auto  
tions of the input signal.  
Filter  
3
Projection  
Keystone  
Picture in Picture  
Select the item name "ASPECT" and select the setting contents  
ᮤ ᮣ  
with the cursor (  
) buttons.  
Personal Computer Signal  
Auto............ Automatically enlarges or reduces the image to project a full screen in a ratio of 4:3  
Direct .......... Maintains the aspect ratio and projects a picture of the maximum displayable size  
Real ............ Projects the input signal without pixel conversion  
Input Signal  
Auto  
Direct  
Real  
The setting is higher  
than the display reso-  
lution of the projector.  
The setting is lower  
than the display reso-  
lution of the projector.  
Video Signals  
Auto............ While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the bound-  
aries of the screen. The top and bottom of the 16:9 image becomes black.  
Wide ........... Projects to fill the full width with the entire image at 16:9.  
(This feature is used to project a squeezed image in a proper aspect ratio.)  
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen.  
(Portion that extend off screen is cut.)  
Aspect ratio selection  
4:3 screen  
Auto  
Wide  
Zoom  
16:9 screen  
Download from Www.Somanuals.Eco-m5.1All Manuals Search And Download.  
View  
Filter  
This function sets the sharpness when the input signal is  
adjusted to the resolution of the projector and enlarged or  
reduced.  
Select the item name "Filter" and select the setting contents with  
Aspect  
Auto  
ᮤ ᮣ  
the cursor (  
) buttons.  
Filter  
3
Projection  
Keystone  
Picture in Picture  
Smaller numerical values result in a sharper picture and larger  
values result in a softer picture. Please select your desired setting  
value.  
Projection  
This function selects the projection orientation to the  
screen. It is set when the projector projects to the front or  
the rear of the screen.  
Aspect  
Auto  
Filter  
3
1. Select item name "Projection" and press the cursor ( ) but-  
ton. The sub menu will open.  
Projection  
Keystone  
Aspect  
Filter  
Auto  
3
2.Select "Vertical Flip" or "Horizontal Flip" with the cursor ()  
ᮤ ᮣ  
buttons and set to "On" or "Off" with the cursor (  
tons (or with the main unit ( ) button).  
) but-  
Projec
Off  
Vertical Flip  
Keysto
Horizontal Flip  
Off  
"Vertical Flip" Off  
"Vertical Flip" Off  
"Vertical Flip" On  
"Vertical Flip" On  
"Horizontal Flip" Off  
"Horizontal Flip" On  
"Horizontal Flip" On  
"Horizontal Flip" Off  
Download from Www.Somanuals.Eco-m5.2All Manuals Search And Download.  
View  
Keystone  
This function corrects the keystone distortion of the pro-  
jected picture on the screen. Adjust so that the edges are  
parallel in the vertical and the horizontal directions.  
Aspect  
Auto  
3
1. Select item name "Keystone" and press the cursor ( ) but-  
ton. The sub menu will open.  
Filter  
Projection  
Keystone  
2. Select "V Keystone" or "H Keystone" with the cursor (●●)  
Aspect  
Filter  
Auto  
3
ᮤ ᮣ  
buttons and adjust with the cursor (  
main unit ( ) button).  
) buttons (or with the  
Projection  
+
Keys
V Keystone  
0
+
H Keystone  
0
Off  
Keystone Save  
CANCEL  
MENU  
Vertical keystone  
(-) direction  
Vertical keystone  
(+) direction  
ENTER  
HKSTN  
VKSTN  
Pressing the button corrects the  
projected picture in the direction of  
the dotted screen outline.  
Horizontal keystone  
(-) direction  
Horizontal keystone  
(+) direction  
Note  
* Overcompensation of the vertical keystone correction value will result in a narrowing of the horizontal keystone  
adjustment range. Likewise, overcompensation of the horizontal keystone correction value results in a nar-  
rowed vertical adjustment range.  
* Menus and other on-screen displays are not adjusted.  
Download from Www.Somanuals.Eco-m5.3All Manuals Search And Download.  
View  
Keystone Save  
This function is used to save the keystone adjustment values.  
Setting Keystone Save to on will set the previous keystone adjustment values when projecting after the  
power cable has been disconnected and then reconnected.  
1. Select item name "Keystone" and press the cursor ( ) but-  
ton. The sub menu will open.  
Aspect  
Filter  
Auto  
3
Projection  
2. Select "Keystone Save" with the cursor (●●) buttons and  
+
+
Keys
V Keystone  
0
0
ᮤ ᮣ  
set with the cursor (  
button).  
) buttons (or with the main unit (  
)
H Keystone  
Off  
Keystone Save  
Off .............. The keystone adjustment values return to the initial values when the power cable is unplugged.  
On............... The keystone adjustment values are retained in storage even when the power cable has been unplugged.  
Note  
Regardless of whether Keystone Save is set to "On" or "Off", when projection is from the standby condition, the  
picture is projected using the previous keystone adjustment values.  
Picture in Picture  
This function displays the picture from the VIDEO jack as a  
sub-picture on the input screen (i.e., the main picture) from  
the PC connector.  
Aspect  
Auto  
3
Filter  
Projection  
Keystone  
Picture in Picture  
1. Select item name "Picture in Picture" and press the cursor (  
button. The sub menu will open.  
)
Aspect  
Auto  
3
Filter  
2. Select "Size" or "Position" with the cursor (●●) buttons and set  
Projection  
Keystone  
ᮤ ᮣ  
with the cursor (  
) buttons (or with the main unit ( ) button).  
Picture in P
Size  
Off  
Position  
Size Settings  
Small  
Medium  
Large  
Off  
Sub-picture  
Main picture  
Position Settings  
Display at upper left of main screen  
Display at upper right of main screen  
Display at center of main screen  
Display at lower left of main screen  
Display at lower right of main screen  
Note  
Sizes of a sub-picture vary depending on the signal input to the PC connector.  
The adjustment display and picture will not appear unless a signal is input to the PC connector.  
Some types of signal for a main picture cannot be set to "Small" or "Large".  
Download from Www.Somanuals.Eco-m5.4All Manuals Search And Download.  
Setup  
Select menu name "Setup".  
See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations.  
The item name display will differ depending on the input signal. See "List of Item Names Offering Input  
Selection and Adjustments/Settings" on Pages E-44 and E-45.  
Language  
Language  
This function sets the language that is displayed on screen  
in the messages and menu displays.  
Auto Source  
Auto Power Off  
On Screen  
On  
Off  
On  
1. Select item name "Language" and press the cursor ( ) button.  
The selection display will open.  
Menu Position  
YPbPr  
Disable  
Black  
Background  
2. Select with the cursor (●●) buttons (or with the main unit (  
)
English  
Language  
Deutsch  
button).  
Auto Source  
Auto Power Off  
On Screen  
Menu Position  
YPbPr  
Français  
Italiano  
Español  
Svenska  
Background  
Auto Source  
Language  
The Auto Source function automatically detects the input sig-  
nal when the power supply is switched on and when the in-  
put is switched.  
Auto Source  
Auto Power Off  
On Screen  
Menu Position  
YPbPr  
On  
Off  
On  
Select the item name "Auto Source" and select the setting con-  
Disable  
Black  
ᮤ ᮣ  
tents with the cursor (  
) buttons.  
Background  
On............... Switches on the automatic detection function  
Off .............. Switches off the automatic detection function  
Order of Signal Detection  
The search is repeated in the order of Analog RGB  
YPbPr  
Digital RGB  
Video  
S-Video  
YCbCr. When a signal is detected, the search is stopped and the image is projected.  
Note  
Set "YPbPr" to "Enable" (i.e., valid) when inputting a component signal YPbPr.  
When "YPbPr" is set to "Disable", detection is not possible.  
Download from Www.Somanuals.Eco-m5.5All Manuals Search And Download.  
Setup  
Auto Power Off  
This function switches off the projector power automatically  
when the input of the projector enters a no-signal condition.  
Language  
Auto Source  
Auto Power Off  
On Screen  
Menu Position  
YPbPr  
On  
Off  
On  
Select item name "Auto Power Off" and select the setting con-  
ᮤ ᮣ  
tents with the cursor (  
) buttons.  
Disable  
Black  
Background  
On............... The power is switched off when there is no signal.  
Off .............. The power is not switch off even when there is no signal.  
Operation when Function is On  
*
The "No Signal Power Off" display appears when a no-signal  
condition continues for approximately 10 seconds. The power  
is switched off about 5 minutes after this.  
No Signal  
Power Off  
*
If a signal is input during the appearance of the display and an  
operation button other than the POWER button is pressed, the  
display is closed and the function is cancelled.  
Note  
Some video decks and other equipment output a blue background or other video when playback ends. When this  
happens, a signal is being input to the projector and Auto Power Off is not activated.  
On Screen  
Language  
This function switches on or off messages that are displayed  
in a black frame.  
Auto Source  
Auto Power Off  
On Screen  
Menu Position  
YPbPr  
On  
Off  
On  
Select item name "On Screen" and select the setting contents  
ᮤ ᮣ  
with the cursor (  
) buttons.  
Disable  
Black  
Background  
On............... The message is displayed.  
Off .............. The message is not displayed.  
Example of a display when the  
ASPECT button is pressed  
Note  
Even when set to off, messages that are not in a black frame will be  
displayed.  
Wide  
Download from Www.Somanuals.Eco-m5.6All Manuals Search And Download.  
Setup  
Menu Position  
This function sets the display position of the menu.  
Language  
Auto Source  
Auto Power Off  
On Screen  
Menu Position  
YPbPr  
On  
Off  
On  
Select item name "Menu Position" and select the setting contents  
ᮤ ᮣ  
with the cursor (  
) buttons.  
Disable  
Black  
.............. Displays on the left side  
.............. Displays on the right side  
Background  
YPbPr  
This setting causes the projector not to accept component  
YPbPr signals.  
Language  
Auto Source  
Auto Power Off  
On Screen  
Menu Position  
YPbPr  
On  
Off  
On  
Select item name "YPbPr" and select the setting contents with  
ᮤ ᮣ  
the cursor (  
) buttons.  
Disable ....... Function is made invalid and input selection is not permit-  
Disable  
ted  
Background  
Black  
Enable......... Function is made valid and input selection is made possible.  
Background  
This function sets the screen color when the input source is  
no-signal.  
Language  
Auto Source  
Auto Power Off  
On Screen  
Menu Position  
YPbPr  
On  
Off  
On  
Select item name "Background" and select the setting contents  
ᮤ ᮣ  
with the cursor (  
) buttons.  
Black........... Sets a black screen when there is no signal  
Blue ............ Sets a blue screen when there is no signal  
Disable  
Background  
Black  
Download from Www.Somanuals.Eco-m5.7All Manuals Search And Download.  
Setup  
White Balance  
This function automatically adjusts the black level and the  
white level of the analog RGB input signal so that they suit  
the personal computer. This serves to improve color repro-  
ducibility.  
Language  
Auto Source  
Auto Power Off  
On Screen  
On  
Off  
On  
Menu Position  
YPbPr  
Disable  
Black  
1. Select item name "White Balance" and press the cursor (  
button.  
The display changes to the "Input Black Signal" display.  
)
Background  
White Balance  
2. The background of the screen of the connected PC is set to  
black.  
3. Press the ( ) cursor button.The display changes to "Adjusting  
Black" and the black level is adjusted.  
Adjusting Black  
Input Black Signal  
4. The adjustment of the black level is completed and the display  
changes to "Input White Signal".  
5. The background of the screen of the connected PC is set to  
white.  
6. Press the ( ) cursor button.The display changes to "Adjusting  
White" and the white level is adjusted.  
White Balance Complete  
Input White Signal  
Adjusting White  
"White Balance Complete" is displayed for a while and the ad-  
justment is completed.  
Download from Www.Somanuals.Eco-m5.8All Manuals Search And Download.  
Info.  
Select menu name "Info.".  
See "Menu Operation Method" on Pages E-37 to E-45 for information about performing menu operations.  
The item name display will differ depending on the input signal. See "List of Item Names Offering Input  
Selection and Adjustments/Settings" on Pages E-44 and E-45.  
Status  
This displays information about the equipment.  
Status  
Factory Default  
Select item name "Status" and press the cursor ( ) button.  
Lamp Timer Reset  
Lamp Timer  
12h  
Display Contents:  
Projector model, firmware version, and the internet  
home page address of PLUS Vision Corp.  
V-1080  
Version:1,0,0,0.0  
Factory Default  
This function returns the adjustments and settings of all the  
input sources to the standard factory default values.  
Status  
Factory Default  
Lamp Timer Reset  
Lamp Timer  
Select item name "Factory Default" and press the cursor ( ) but-  
12h  
ton.  
The display "Press "ENTER" to set Factory Default"  
will appear.  
Press "ENTER" to Factory Default Set  
A press of the ENTER button sets the factory defaults.  
Main unit operation: Press the  
(AUTO) button.  
Items that are not set to the factory default:  
Projection method,YPbPr, Language, and LampTimer  
Lamp Timer Reset  
This function resets the lamp timer. Be sure to perform the  
reset operation when the lamp cartridge has been replaced.  
Select item name "Lamp Timer Reset" and press the cursor (  
button.  
)
Status  
Factory Default  
Lamp Timer Reset  
Lamp Timer  
12h  
The display "Press "ENTER" to reset lamp timer."  
appears.  
A press of the ENTER button resets the timer  
Press "ENTER" to Lamp Timer Reset  
Main unit operation: Press the  
(AUTO) button.  
Download from Www.Somanuals.Eco-m5.9All Manuals Search And Download.  
Info.  
Resolution / Frequency  
This function displays the resolution and frequency of the  
detected input signal.  
Status  
Factory Default  
Lamp Timer Reset  
Resolution  
This information will not be displayed unless an analog RGB or  
digital RGB signal is input and an Analog RGB or Digital RGB  
input selection is made.  
1024
ן
768  
60Hz, 48kHz  
12h  
Frequency  
Lamp Timer  
Lamp Timer  
This function displays the lamp timer.  
When the lamp timer exceeds 1,000 hours, "Replace the Lamp  
Cartridge." is displayed on the screen for 10 seconds at one minute  
intervals.  
Status  
Factory Default  
Lamp Timer Reset  
Lamp Timer  
Replace the lamp with a new one.  
12h  
See "Replacing the lamp cartridge" on Page E-66 for information  
about lamp cartridge replacement.  
When 1,100 is exceeded, "Warning!! System Shutdown" is dis-  
play for 10 seconds and the power is switched off.  
Download from Www.Somanuals.Eco-m6.0All Manuals Search And Download.  
When the STATUS Indicator is Lit/Flashes  
STATUS indicator  
POWER indicator  
When the STATUS indicator of the main unit  
operation panel is lit or flashes, notification  
is being given of the irregularities de-  
scribed.  
STATUS  
POW  
ER  
POWER  
MENU  
SOURCE  
QUICK  
MENU  
AUTO  
AUDIO  
VIDEO  
STATUS Indicator  
POWER Indicator  
Action to Take  
The temperature has become abnormally high.  
*
The thermal protector is activated.if the room tem-  
perature is high, move the projector to a cool lo-  
cation. If the internal temperature of the projector  
is high, check the ventilation holes of the cooling  
fan and clean them if they are obstructed.  
When the thermal protector is activated, the power  
is switched off and even if the power is soon  
switched back on, the power might not actually  
be supplied to the projector. Should this happen,  
wait one minute and then switch the power on  
again.  
STATUS  
POWER  
*
Flashes red  
Lit red  
(0.5 s lit / 0.5 s off)  
The lamp will not light up.  
STATUS  
POWER  
Wait one minute or longer while the lamp lighting volt-  
age irregularity detection protector is activated and  
switch the power on again. If the problem still per-  
sists, unplug the power cable and contact your dealer.  
Flashes red  
(1 s lit / 1 s off)  
When the lamp burns out during operation: Flashes amber for 60 seconds  
and then is lit amber  
When the lamp does not light from the beginning: Lit amber  
STATUS  
The fan is stopped.  
POWER  
Unplug the power cable and request service from your  
dealer.  
Flashes red  
Lit amber  
(0.5 s lit / 0.5 s off)  
STATUS  
The lamp cover is open.  
The lamp cover is not attached properly.  
Attach it properly.  
POWER  
Flashes red  
Lit red  
(1 s lit / 1 s off)  
Download from Www.Somanuals.Eco-m6.1All Manuals Search And Download.  
When the STATUS Indicator is Lit/Flashes  
STATUS Indicator  
POWER Indicator  
Action to Take  
STATUS  
It is timer to replace the lamp.  
The lamp timer has exceeded 1,000 hours.  
Replace the lamp cartridge.  
POWER  
Lit red  
When power is on:  
Lit green  
When power is off:  
Lit amber  
The lamp's service life has ended.  
The lamp timer has exceeded 1,100 hours.The lamp  
will not light. Replace the lamp cartridge.  
STATUS  
POWER  
Lit red  
Lit amber after 60 seconds  
of flashing in amber  
Thermal Protector  
When the internal temperature of the projector becomes abnormally high, the STATUS indicator will flash  
red (at a rate of once per second) and the POWER indicator will light red.  
The thermal protector is activated and the power of the projector is switched off simultaneously.  
Should this occur, proceed with the following actions.  
1. Switch off the power and disconnect the power plug from the wall outlet.  
2. Check the following matters and take the required measures.  
When the projector is being used in a location that has a high ambient temperature, set it up again in  
a cool location. Check the outflow and intake holes and clean them if they are obstructed.  
3. Wait about 60 minutes until the temperature of the projector drops.  
If after having performed the above matters, the problem still has not been solved, please contact your  
store of purchase.  
Download from Www.Somanuals.Eco-m6.2All Manuals Search And Download.  
Troubleshooting  
Check the following matters before requesting servicing.  
Reference  
Page  
Problem  
Check  
* Has the power plug become disconnected from the  
outlet?  
No power  
E-24  
* Is the lamp cover properly attached?  
* Has the internal temperature become high?When the  
internal temperature becomes very high, to protect  
the unit the power will not switch on.  
E-68  
E-62  
* Has the lamp timer exceeded 1,100 hours?The power  
will no longer switch on once the timer has exceeded  
1,100 hours.  
E-62  
* Has the connected input been selected?  
* Is the cable of the input connector properly connected?  
* If there is connection to a personal computer, is a  
signal being output from the personal computer?  
* Has a signal that is higher than the supported fre-  
quency of the projector been input?  
No video  
E-28  
E-18 – 22  
E-20  
E-70  
* Check that the image adjustment brightness and con-  
trast are not set to minimum.  
E-32, 46  
* Has the lamp burned out?  
* Is the STATUS indicator flashing?  
E-62  
E-61  
* Is the projector installed properly?  
* Is the keystone adjustment properly adjusted?  
Distorted video  
Blurred video  
E-26  
E-34, 53  
* Is the lens properly focussed?  
E-27  
* Are the projection screen and the projector installed  
at the proper distance?  
E-16, 17  
* Has the projection distance exceeded the focussing  
range?  
E-16, 17  
* Is there condensation on the lens and other parts?  
When the projector has been stored in a cold location  
and the power is switched on in a warm location, there  
may be condensation on the lens and other internal  
optical parts. Should this occur, wait several minutes  
until the condensation disappears.  
* Is the input signal being supported for resolution and  
frequency? Check the resolution of your personal com-  
puter.  
Image position is shifted  
and doesn't display prop-  
erly  
E-70  
E-30, 51  
E-50  
* When the image is broken in the horizontal or vertical  
direction, or the image does not fill the entire screen,  
select a suitable aspect ratio.  
Image is broken  
* When a component signal is being input, the color  
space setting is different. Perform the color space  
setting.  
Overall color of image is  
strange  
Download from Www.Somanuals.Eco-m6.3All Manuals Search And Download.  
Troubleshooting  
Reference  
Page  
Problem  
Check  
* Other than for "Setup" and "Info.", selection is not per-  
mitted unless a signal is input to the projector and an  
image or picture is projected.  
Menu name cannot be se-  
lected  
* There will not be a display unless the personal com-  
puter screen is being projected.  
An image will not be output unless a video image is  
being input.  
Pressing the PIP button  
does not display a sub-pic-  
ture  
E-31  
* Has the transportation insulation sheet been re-  
moved?  
* Is an obstacle located between the remote control and  
the remote control sensor of the main unit?  
* Is the remote control out of range for its signal to reach  
the sensor?  
Remote control does not  
function  
E-13  
E-14  
* Is there strong light or a fluorescent lamp in the vicin-  
ity of the sensor?  
* Are the batteries weak? Try directing the remote con-  
trol toward the remote control sensor from a close  
distance and operating it.If there is difficulty in chang-  
ing settings, the batteries are weak. Replace the bat-  
teries with new ones.  
STATUS indicator lights or  
flashes  
E-61  
* See the STATUS indicator list.  
Download from Www.Somanuals.Eco-m6.4All Manuals Search And Download.  
Cleaning  
Be certain to disconnect the power plug from the power outlet before cleaning.  
Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecti-  
cides. Do not leave rubber or vinyl products in contact with the projector for long periods. Doing so  
could cause them to undergo qualitative changes or the coatings may peel, etc.  
Cleaning a Soiled Projector Main Unit  
* Wipe with a lint-free, soft, dry cloth.  
When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish  
with a dry cloth. If a chemically-treated cloth is going to be used, please follow any written warnings.  
* Do not wipe with thinner, benzene, or other solvents.Doing so could cause them to undergo qualitative  
changes or the coatings may peel, etc.  
* When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum  
cleaner to clean out the dust. Avoid using the vacuum directly without attaching the adapter as well as  
the use of a nozzle adapter.  
* Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will  
cause scratches.  
Dirty Lens  
* Clean using the same method you would use to clean a camera lens: Use a commercial blower for  
camera use or cleaning paper for eye glasses. Be careful not to scratch the lens at this time.  
Dust of the Intake and Outflow Holes  
Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal  
temperature to rise which could cause damage. Clean this area carefully. As a guideline, clean at least  
every 100 hours.  
A U T O  
M E N U  
Q U I C K  
S O U R C E  
* Switch off the power, check that the  
POWER indicator has changed to a  
steadily lit amber, then unplug the  
power cable.  
M E N U  
P O W E R  
R
E
W
O
P
S
U
T
A
T
S
* Clean out the holes from the outside  
using a vacuum cleaner. Use the  
brush adapter of the vacuum cleaner  
to do this. Avoid using the vacuum  
directly without attaching the adapter  
as well as the use of a nozzle adapter.  
Cleaning the Inside of the Projector  
Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period  
while dust has collected inside the projector could cause a fire or breakdown. Do not clean the inside of  
the projector by yourself. Please be sure to contact your dealer.  
Download from Www.Somanuals.Eco-m6.5All Manuals Search And Download.  
Replacing the Lamp Cartridge  
The lamp as a light source used in the unit has a lifespan.The rated lamp life is about 1,000 hours.  
The rated lamp life is the average life of the lamps produced and tested (under the test conditions  
of our company) for a long term, however, it may become shorter depending on the conditions of  
usage.  
After the lamp has been operating for 1000 hours or longer, the STATUS indicator will light and  
total lamp usage will be displayed on the screen.  
The unit will not turn on after 1100 hours. When this happens, replace the lamp cartridge with a  
new one. Follow the procedures below for replacement.  
The rated lamp life is about 1,000 hours.The rated lamp life is the average life of the lamps produced and  
tested (under the test conditions of our company) for a long term, however, it may become shorter de-  
pending on the conditions of usage.  
After the lamp has been operating for 1000 hours or longer, the STATUS indicator on the control panel  
will light and the “LAMP USAGE” icon which shows hours of total lamp usage will be displayed on the  
screen.  
When this happens, turn off the unit and replace the lamp cartridge with a new one.The unit will not turn  
on after 1100 hours. (It will go off if it is in use.)  
CAUTION  
• DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Allow  
at least one hour for the lamp to cool before handling.  
• DO NOT LOOSEN ANY SCREWS except for those men-tioned in the instructions below. There  
is danger of electric shock.  
CAUTION  
Do not use a lamp cartridge other than the PLUS replacement lamp cartridge. Order this from  
your PLUS dealer using the unit model number (see Note” below).  
Note  
When the lamp usage time reaches 1100 hours, it becomes impossible to switch on the power and menus are  
not displayed. In such a case, see If the unit doesn’t go on because lamp usage exceeds 1100 hours” on page  
25.  
Obtain a replacement lamp cartridge at the store where the unit was purchased. Please specify the following  
information when ordering a replacement lamp cartridge:  
Model name : V-120  
Product code : 28-060  
Download from Www.Somanuals.Eco-m6.6All Manuals Search And Download.  
Replacing the Lamp Cartridge  
PREPARATION Turn the projector upside down and place it on a soft cloth that has  
been prepared in advance to prevent scratches.This will assist in lamp  
cartridge replacement. After replacement, return the projector to the  
original condition.  
Disconnect the power cable.  
1.  
Turn the projector upside down.  
2.  
Remove the lamp cover.  
3.  
(1) Turn the screw that fastens the lamp cover  
counterclockwise until it turns freely.(The screw  
will not come out.)  
(2) Lift the lamp cover a little and pull it off in the  
direction of the arrow.  
4. Remove the lamp cartridge  
(1) Turn the 2 screws that fasten the lamp cartridge (2) Grasp the handle of the lamp cartridge, pull it  
counterclockwise until they turn freely. (The  
screws will not come out.)  
upward and remove the lamp cartridge.  
Download from Www.Somanuals.Eco-m6.7All Manuals Search And Download.  
Replacing the Lamp Cartridge  
5. Install the new lamp cartridge  
(1) Slowly push in the lamp cartridge with the (2) Turn the 2 screws of the lamp cartridge clock-  
socket facing forward.(Align the lamp cartridge  
screw with the screw hole of the projector.)  
wise to tighten.  
6. Install the lamp cover  
(1) First insert the front edge of the lamp cover into (2) Turn the screw of the lamp cover clockwise to  
the groove, then close the lamp cover.  
tighten.  
7. Reset the lamp timer to zero.  
Plug in the power cable and switch on the power before resetting.  
Select [Info.] [Lamp Timer Reset] and then reset the hours indication.  
NOTE: The projector will no longer start when the lamp timer exceeds 1,100 hours. As a result, it will not be  
possible to reset the lamp timer through timer operations.  
Should this situation arise, set to the standby condition and press the SOURCE button and the ASPECT button of  
the main unit at the same time for at least 5 seconds.  
When reset, the STATUS indicator will go off.  
Please obtain a replacement lamp from your dealer. When ordering, please specify a V-1080/V-807 special re-  
placement lamp type V-120 (order code 28-060).  
Download from Www.Somanuals.Eco-m6.8All Manuals Search And Download.  
Specifications  
Optical  
DMDTM  
Single Chip Digital Micro Device (DMDTM  
V-1080: 1024 
ן
 768 dots  
V-807: 800 
ן
 600 dots  
)
Lamp  
Image size  
120 W high-pressure mercury lamp  
V-1080: 36 inch to 200 inch  
V-807: 35 inch to 200 inch  
800 ANSI lumens  
Light Output  
Contrast Ratio  
800:1 (Full on/off)  
Electrical  
Inputs  
Video (NTSC3.58/NTSC4.43/PAL/PAL_N/PAL_M/PAL60/SECAM)  
RGB (Horizontal :15 to 85 kHz, Vertical 50 to 120 Hz)  
Color Reproduction  
Resolution  
Full color (16,770,000 colors)  
V-1080:  
SXGA (Compression), XGA(True), SVGA/VGA (Expansion/True)  
V-807:  
XGA (Compression), SVGA (True), VGA (Expansion/True)  
Input Current  
1.8 A  
Power Requirement  
Power Consumption  
100 - 240 V AC, 50/60 Hz  
160 watts  
Mechanical  
Dimensions Excluding Stand 18.0 cm (W) 
ן
 4.5 cm (H) 
ן
14.1 cm (D)  
7.1 in.(W) 
ן
 1.8 in.(H) 
ן
 5.6 in.(D)  
Weight  
Approximately 0.9 kg / 1.98 lbs  
Operational Temperatures  
Regulations  
Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity  
UL Approved (UL 1950, CSA 950)  
Meets FCC Class A requirements  
Meets EMC Directive (EN55022, EN55024)  
Meets Low Voltage Directive (EN60950)  
* Specifications and design are subject to change without notice.  
Download from Www.Somanuals.Eco-m6.9All Manuals Search And Download.  
Table of Supported Frequency  
The unit automatically determines PC signals to select the appropriate resolution.  
Some signals may require manual adjustments.See "Picture Adj./Fine Picture /H Position /V Position" on  
pages E-47 and E-48.  
Signal  
Resolution  
Frequency H. Refresh Rate Digital  
( kHz ) ( Hz ) V-1080 V-807 V-1080 V-807  
31.5 70.1  
Analog  
VESA  
640 
ן
 350  
640 
ן
 350  
720 
ן
 350  
640 
ן
 400  
640 
ן
 400  
720 
ן
 400  
720 
ן
 400  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1280 
ן
 1024  
1280 
ן
 1024  
1280 
ן
 1024  
640 
ן
 400  
640 
ן
 400  
640 
ן
 480  
640 
ן
 480  
800 
ן
 600  
800 
ן
 600  
1120 
ן
 750  
1024 
ן
 768  
1024 
ן
 768  
1280 
ן
 1024  
640 
ן
 480  
832 
ן
 624  
1024 
ן
 768  
1152 
ן
 870  
1152 
ן
 900  
1280 
ן
 1024  
1024 
ן
 768  
1280 
ן
 1024  
1152 
ן
 900  
1280 
ן
 1024  
37.9  
31.5  
31.5  
37.9  
31.5  
37.9  
31.5  
37.9  
37.5  
43.3  
35.2  
37.9  
46.9  
48.1  
53.7  
48.4  
56.5  
57.7  
60.0  
68.7  
64.0  
80.0  
91.1  
24.8  
31.5  
31.5  
37.5  
37.9  
46.9  
50.0  
56.5  
60.0  
64.6  
35.0  
49.7  
60.2  
68.7  
61.8  
81.1  
49.7  
63.9  
71.7  
78.1  
85.1  
70.0  
70.1  
85.1  
70.0  
85.0  
60.0  
72.8  
75.0  
85.0  
56.3  
60.3  
75.0  
72.2  
85.1  
60.0  
70.1  
72.0  
75.0  
85.0  
60.0  
75.0  
85.0  
56.4  
70.1  
60.0  
75.0  
60.3  
75.0  
60.1  
70.1  
75.0  
59.9  
66.7  
74.5  
74.9  
75.1  
66.0  
76.1  
60.4  
60.0  
76.1  
72.0  
NEC(PC-9800)  
Apple Macintosh  
Sun  
SGI  
HP  
: Supported frequency  
– : Not supported frequency  
V-1080: The native resolution of the panel is 1024
ן
768. Resolutions other than 1024
ן
768 may be  
displayed with uneven size of text or lines.  
V-807: The native resolution of the panel is 800
ן
600. Resolutions other than 800
ן
600 may be dis-  
played with uneven size of text or lines.  
Download from Www.Somanuals.Eco-m7.0All Manuals Search And Download.  
Cabinet Dimensions  
M E N U  
Q U I C K  
A U T O  
P O W E R  
S O U R C E  
M E N U  
P O W E R S T A T U S  
180 (7.1)  
Unit: mm (inch)  
Download from Www.Somanuals.Eco-m7.1All Manuals Search And Download.  
PLUS Industrial Corporation is certified to ISO 9001.  
Certificate No. Q1001219118017.  
Otowa Head Office and PLUSLAND of PLUS Corporation  
and PLUS Industrial Corporation are certified to ISO 14001.  
Certificate No. NQE-9809008A.  
* PLUS Vision Corp. is certified to ISO 14001 as a member of the  
PLUS group.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Projection Television 43PP9202 User Manual
Philips TV Receiver MX6000I User Manual
Phoenix Gold Speaker SXT10D2 User Manual
Piega Speaker P Sub 4 User Manual
Planet Technology Switch WGSW 2620PV User Manual
Polaroid Portable DVD Player PDU 2729 User Manual
Polk Audio Car Speaker db351 User Manual
Polk Audio Speaker RM3300 User Manual
ProForm Treadmill 485 CS User Manual
Psiber Data Systems Switch NETWORK IP TESTER User Manual