DBS 576 Version 3.6
(ACD Version 4.0)
issued October 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
General System Information............................................................. 1
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Basic Service Flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ACD Call Handling Program ............................................................................. 4
Selecting Program Processing ........................................................................... 4
Programming by Commands .............................................................................. 6
Transfer Destination Voice Number ................................................................. 11
Silent Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Supervisor Features............................................................................... 15
Common Operation of Supervisor Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Activating Supervisor Menu.............................................................................. 15
Displaying System Information......................................................................... 16
Supervisor Customization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Direct Incoming Call Setting.............................................................................. 18
Transferring Incoming Call Setting................................................................... 20
Registering Agent IDs........................................................................................ 23
Confirming Agent IDs......................................................................................... 25
Setting on Service Flow Details........................................................................ 26
Supervisor Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Traffic Information.............................................................................................. 28
Waiting Call......................................................................................................... 29
Agent Status ....................................................................................................... 30
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
MIS Report Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
MIS Report Outline............................................................................................. 31
MIS Report Operation......................................................................................... 34
User Information Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Agent Features............................................................................................ 46
Log-in / Log-out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Available/Unavailable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Work Unit Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Zip Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Key Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Index............................................................................................................. Index-1
iv
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
General System Information
Configuration
The Built-In ACD System is a simple ACD system that installed in the DBS
576 System. The built-In ACD system is composed of the two circuit cards;
the ACD card and the VPU/4 card.
The system configuration is shown below. Using RS-232C port allows MIS
(Management Information System) reports to be output to a printer or PC but
not to the both simultaneously.
The DBS 576 System configured for a maximum of 576 ports can support a
maximum of two Built-In ACD systems. Note that a single-shelf (96-port)
configuration can accommodate only one ACD system.
Figure 1. ACD Configuration
Note: Standard RS232C cables cannot be used for connection. Use the
special cable included with the ACD card. For PC/printer connecting
conditions, see the ACD installation section.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Specifications
The following shows the major specifications of the Panasonic Built-In ACD
system (maximum).:
Table 1.
Maximums per ACD System
3
Agent Group
64
Agent IDs/system
Number of Agents/system
Supervisor IDs/system
Voice port/system
Music Port
32
6
4 ports are shared.
1 Music on Hold source on the CPC is
used.
1 (RS232C, 9600bps)
MIS Monitor Port
6 (Length of each message can vary,
with a total of 96 seconds recording
time available.)
Number of user guidance
messages
Max, 2-week memory (updated on
Mondays)
MIS Reports
50
Maximum Calls Queued
2
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Basic Service Flow
The following chart shows the basic flow of ACD services.
Commands can be used to set any call distribution operation in the ACD Call
Handling Program.
At initial start-up of ACD, programming is performed automatically using
default sample programs.
Figure 2.
Setting of the ACD-tar-
geted call and ACD Call
Handling Program num-
ber is performed by pro-
gram setting 2101 to
Call Incoming
No
ACD-targeted call?
Yes
See
Note
2124 and 2201 to 2224.
•
Type :CO line/pri-
vate line
Mode :Direct incom-
ing call/trans-
ferred
Read ACD Call Han-
dling Program number
corresponding to target
CO line.
Wait for stop of
incoming call,
then disconnect.
•
incoming call
ACD Call Handling
Program number: 1
to 4
•
Perform call distribu-
tion operation accord-
ing to ACD Call
Handling Program
number.
Any program for the ACD
Call Handling Program
number can be set by 4101
to 4104 using commands.
The built-in VM
corresponding
to VM number
(1 to 4) can be
set by program
setting 4201 to
4204.
Call built-in VM
according to specified
VM number.
Agent extension
line of agent group
1 or 2
Built-VM
Extension line
Disconnection
Note:
• If there is a transferred incoming call (incoming call type either CO line
or private line) during an extension line incoming call, this is considered
as an ACD-targeted call.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
ACD Call Handling Program
Commands can be used to set any call distribution operation for each of the
ACD Call Handling Program numbers (4101 to 4104).
For details on the content of default sample programs, see "Chapter 2.
Programming, ACD Call Handling Program Setting."
Selecting Program Processing
You can select program processing by the FF key. The following shows the
procedure and flow of operations from entry of program numbers to selection
of program processing.
Operation
1. From [SUPERVISOR MENU] screen, press the soft key 3 or 8 to
SUPERVISOR MENU
select [CUSTOMIZE].
SYSTEM INFO
MIS REPORT
CUSTOMIZE
→
→
→
DISP SYS INFO
→
2. From [CUSTOMIZE MENU] screen, press the soft key 5 or 10 to
CUSTOMIZE
MENU
select [CALL HANDLING].
LINE REGIST.
SYSTEM ID
→
→
→
→
→
AGENT ID
GROUP SETTING
CALL HANDLING
3. From [CALL HANDLING] screen, press the soft key 1 or 6 to
CALL HANDLING
select [PROGRAM].
PROGRAM
→
→
VM NUMBER
CUSTOMIZE MENU
→
4. The following screen appears. Press the soft key for desired
CALL HANDLING
program number.
PROGRAM 1
→
→
→
→
→
PROGRAM 2
PROGRAM 3
PROGRAM 4
CUSTOMIZE MENU
4
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
5. The List Mode screen is displayed.
SEARCH 1,015,010
01:Select FFKey
This screen displays the current setup status.
The program lines currently displayed at 1st LCD are the target of
processing.
The NEXT or HOLD keys move to the next line.
The PREV or FLASH keys return to the previous line.
SEARCH
PLAY
1,020,010
7,1
SEARCH
RET
2,015,003
02,010
9,0
PLAY
6. Press the FF key to determine processing on the currently
displayed program line on the 1st LCD.
FF1 : EDIT
FF2 : INSERT
FF3 : DELETE
FF6 : ALL DELETE
The following items describe the details of subsequent processing.
Note:
• Pressing the PROG key returns to the ACD Call Handling Program
number in step 1.
Figure 3.
Enter ACD Call Han-
dling Program number.
HOLD
List Mode screen
SEARCH 1,015,010
01:Select FFKey
SEARCH
PLAY
1,020,010
7,1
NEXT/HOLD: to next line
PREV/FLASH: to previous line
2nd LCD display
“01: Select FF Key”
“01: Program line number”
“Select FF Key: Operation Guide”
SEARCH
RET
2,015,010
02,010
9,0
PLAY
FF1
EDIT
FF2
INSERT
FF3
DELETE
FF6
ALL DELETE
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Programming by Commands
After you have determined the desired process by the FF key, you can
customize any program using the six available commands.
The following table shows a list of commands that are used:
Table 2.
Com-
mand
No
Parameter1 Parameter2 Parameter3
Description
1
END/
End/Disconnect
DISK
•
•
Ends the ACD Call Handling Program at this line.
When there is a call agent, ends by on-hook dis-
connection of the agent that replied to the call.
2
FWD
Transfer Des- No Answer
Forward EXT
tination
Extension
Line Number (seconds)
Setting 0 to
Timer 001 to
600
•
Performs an extension line tone call to the trans-
fer destination extension line specified in parame-
ter 1, and performs a transfer after responding to
the other party.
(infinitewhen
9999 (max. 4 not set)
digits)
(must be set)
•
When there is no response, the response from the
other party is waited for until the end of the no
answer timer set in parameter 2.
3
FWDVM Transfer Des- No Answer
tination VM Timer 001 to
Number Set- 600
Forward VM
•
•
•
Setting of the built-in VM corresponding to the
transfer destination VM number of parameter 1 is
set by programming setting 4201 to 4204.
Performs an extension line tone call to the trans-
fer destination built-in VM specified in parameter
1, and performs a transfer after the VM response.
When there is no response, the response from the
other party is waited for until the end of the no
answer timer set in parameter 2.
ting 1 to 4
(seconds)
(must be set) (infinitewhen
not set)
Message Play
Guidance
4
PLAY
Answer & Play Message
Option
Number Set-
•
Plays back specified guidance in response to a
call.
•
•
0: Play
ting
1: Play and
Search
•
•
Guidence numbers 1 to 6 are for user recording.
Guidence numbers 7 to 9 are for fixed recording
messages. (i.e., 7 = “wait for available agent”
message, 8 = “transfer” message, and 9 = “dis-
connect” message.)
5
SEARCH Agent Group Search Time No Answer
Setting Setting 001 to Timer 001 to
(must be set) 600
(seconds)
Agent Search
•
Performs a transfer to transferable agents within
the agent group specified in parameter 1.
When there is no transferable agent, performs a
search until end of the search time set in parame-
ter 2.
600
(seconds)
•
(must be set) (infinitewhen
not set)
•
When the transferred agent does not respond, a
response from the other party is waited for until
the end of the no answer timer set in parameter 3,
and transfer to another Agent is moved to after
the end of the no answer timer.
6
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Com-
mand
No
Parameter1 Parameter2 Parameter3
Description
6
RET
Program Line Count Set-
Number Set- ting 1 to 255
Return
•
Repeats the program from the line number speci-
fied in parameter 1 up to this line for the count
specified in parameter 2.
ting 1 to 20
(max. 20
lines)
(times)
(must be set)
(must be set)
7
RAD
Port #
Recorded Announcement Device
•
The caller hears MOH if the RAD port # is
invalid or incorrect.
•
THE DBS 576 Built-in ACD must use different
RAD ports than Easy Run Courier ACD.
RAD equipment will connect to AEC ports.
No start or stop control method will be provided
to control the RAD equipment. RAD equipment
must be capable of operating in the continuous
play mode.
•
•
•
•
•
Up to 8 RAD devices can be connected to AEC’s
per system.
This command must be followed by a SEARCH,
FWD or FWDVM command.
For programming (See Section 400 Programming
Manual on page 1-168.)
Operation
The following describes operation in each of the processes.
EDIT (FF1)
This command resets the current setting of displayed program lines. Edit is
repeated from the specified program line through to the currently registered
final program line (excluding the END/DISC line).
The following screen display shows an example of selection and setting of the
SEARCH command.
SEARCH 1,020,010
03:Select Cmd.
1. Press soft keys 1 , 2 or 3 or 6, 7 or 8 for the command to be set,
and press the HOLD key.
FWD
FWDVM
RET
Example: Press soft key 3 to select SEARCH.
PLAY
SEARCH
RAD
List→
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
SEARCH 1
2. Set parameter 1, and press the HOLD key.
03:AGENT GRP.
Example: Press key 2 to set group 2.
AGENT GROUP
NUMBER
(1-3)
List→
Example:
3. Set parameter 2, and press the HOLD key.
SEARCH 2,020
03:Search Time
Example: Press keys 0, 1 and 5 to set the Search Timer to 15.
AGENT SEARCH
TIME
1 to 600 sec.
List→
Example:
4. Set parameter 3, and press the HOLD key.
SEARCH 2,015,010
03:No Ans Time
Example: Enter three digits to set the No Ans Timer.
AGENT NO ANSWER
TIME
The program line that was set is updated when the final parameter
is set. The next line is moved to, and the screen in step 1 is
redisplayed.
1 to 600 sec.
List→
5. Repeat steps 1 to 4 to set other program lines, and end
programming at the END/DISC line.
Note:
• The program line is updated when the final parameter setup is completed at
each command, and the next line is moved to. (Example: In the case of the
FWD command, the program line is updated when the no answer timer of
parameter 2 is input, and the next line is moved to.)
• If you press soft key 10 and select List at any of the above steps, the List
Mode screen is redisplayed.
• The END/DISC line cannot be changed nor deleted.
8
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
INSERT (FF2)
This command inserts a new line in the current setting of displayed program
lines. Insertion can be repeated up to 19 lines.
The following screen display shows an example of insertion and setting of the
SEARCH command.
1. Press the soft key 1, 2 or 3 or 6, 7 or 8 for the commands to be set,
and press the HOLD key.
01:Select Cmd.
FWD
Example: Press soft key 3 to select SEARCH.
FWDVM
PLAY
RET
RAD
SEARCH
List→
2. Set parameter 1, and press the HOLD key.
SEARCH
Example: Press key 1 to set group 1.
01:AGENT GRP.
AGENT GROUP
NUMBER
(1-3)
List→
Example:
3. Set parameter 2, and press the HOLD key.
Example: Press the 0, 1 and 0 keys to set the Search Timer to 10
seconds.
SEARCH 1,
01:Search Timer
AGENT SEARCH
TIME
1 to 600 sec.
List→
Example:
SEARCH 1,010,
01:No Ans Timer
4. Set parameter 3, and press the HOLD key.
Example: Enter three digits to set the No Ans Timer.
AGENT NO ANSWER
TIME
The program line that was set is updated when the final parameter
is set. The next line is moved to, and the screen in step 1 is
redisplayed.
1 to 600 sec.
List
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
5. Repeat steps 1 to 4 to set insertion of other program lines, and end
programming at the END/DISC line.
Note:
• If you press soft key 10 and select List at any of the above steps, the List
Mode screen is redisplayed.
• The END/DISC line cannot be changed nor deleted.
DELETE (FF3)
This command deletes the current setting of displayed program lines.
Deletion can be repeated up to 19 lines.
The following screen display shows an example of deletion of line 01.
1. Confirm the specified line to be deleted, and press the HOLD
SEARCH 1,015,010
01:DELETE(LINE)
key.
Example: Line 01 is deleted.
To Delete Program
Data, Press
HOLD Key.
List→
2. The program line that was displayed is deleted, and the List Mode
screen is redisplayed.
PLAY
7,1
01:Select FFKey
SEARCH 1,020,010
When the specified line is deleted, each subsequent program line
is shifted up.
RET
02,010
9,0
PLAY
END/DISC
Note: If you press soft key 10 and select List at any of the above steps, the
List Mode screen is redisplayed.
10
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
ALL DELETE (FF6)
This command deletes all settings currently set to all lines in the currently
displayed program.
1. Press key 0, and the HOLD key.
Program Delete:
DELETE(Program)
To Delete Program
Data, Press 0 and
HOLD Key
List→
2. All of the program that was displayed is deleted, and only the
default END/DISC line is displayed.
END/DISK
01:Select FFKey
Note: If you press soft key 10 and select List at any of the above steps, the
List Mode screen is redisplayed.
Transfer Destination Voice Number
Outline
Sets the voice mail extension line number and access code corresponding to
the transfer destination voice mail number (1 to 4).
Operation
SUPERVISOR MENU
SYSTEM INFO
MIS REPORT
CUSTOMIZE
→
→
→
1. From [SUPERVISOR MENU] screen, press the soft key 3 or 8 to
select [CUSTOMIZE].
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
2. From [CUSTOMIZE MENU] screen, press the soft key 5 or 10 to
CUSTOMIZE
MENU
select [CALL HANDLING].
LINE REGIST.
SYSTEM ID
→
→
→
→
→
AGENT ID
GROUP SETTING
CALL HANDLING
3. From [CALL HANDLING] screen, press the soft key 2 or 7 to
CALL HANDLING
select [VM NUMBER].
PROGRAM
→
→
VM NUMBER
CUSTOMIZE MENU
→
4201:
4. The 4201 setting screen appears. Enter the extension number +
access code (max, 16 digits) using the 10-key pad, and press
HOLD key to make setting. Each time the HOLD key is pressed,
the setting changes: 4201→4202→4203→4204.
VM NUMBER 1
CUSTOMIZE MENU
→
5. To return to [CUSTOMIZE MENU] screen, press the soft key 5
or 10.
12
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Silent Monitor
Version 3.0 and higher
CAUTION: When using the ACD “Silent Monitor” feature in some states it is
illegal (or civilly actionable) to monitor telephone communications without
giving prior warning to all participants. These laws do not make the Silent
Monitor feature on the telephone system illegal. Before activating this feature,
please check applicable state and federal laws.
The Silent Monitor feature allows an ACD supervisor to monitor a call
between an ACD agent and a caller without the knowledge of either party.
(See CAUTION, above.) If necessary, the ACD supervisor can initiate a
three-way call by barging into the call.
Operation
To initiate Silent Monitor:
Table 3.
Initiating Silent Monitor
Action
Result
Press ON/OFF + 768 + Extension number you want to monitor
OR...
The Silent Monitor feature is
active, and the extension is being
monitored. (The Silent Monitor
key flashes green when Silent Mon-
itor is active.)
Press the FF key assigned as a Silent Monitor Key + Extension
number you want to monitor*
OR...
Press only the Silent Monitor Key if the FF key has been prepro-
grammed to monitor a specific extension number. You do not
need to enter the extension number.
Notes:
• The Silent Monitor key is disabled when the extension assigned to
that key is idle, dialing or ringing.
• If the Supervisor retrieves a call while monitoring a extension, he or
she can suspend the monitoring by pressing the ON/OFF key.
• Press the CONF key during the monitoring to initiate a three-way
call.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Silent Monitor Color Definitions
Silent Monitor Color Definitions
Table 4.
FF Key Color
Definition
Cannot Monitor
Possible Operation
Clear
None
Solid Red
Flashing Green
Able to monitor
Not monitoring
Press Silent Monitor key
On-Hook or CONF
Notice
• Be sure all phone that should NOT be allowed to monitor have a
COS that restricts monitoring. For programming COS (See Section
400 Programming manual on page 1-50.)
• Silent Monitor is allowed or denied by setting the appropriate
extension COS.
• Only one supervisor can initiate Silent Monitor on an individual
extension at any given time.
• Display telephones can initiate Silent Monitoring. SLTs cannot ini-
tiate Silent Monitoring.
• Display telephones and SLTs can be monitored.
• A supervisor cannot initiate Silent Monitoring on an extension
when the extension is on a conference call.
14
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Supervisor Features
Supervisor features are roughly divided into three groups:
1) Supervisor customization: Set for requested features of ACD.
2) Supervisor monitoring: Monitors ACD system status on a large LCD
telephone.
3) MIS report feature: Outputs agent management information.
All of the above features are included in the supervisor menu. The following
describes each of the features and the common operations.
Common Operation of Supervisor Menu
Read this section first before using the supervisor features.
Activating Supervisor Menu
Operation
From Large Display Telephone
1. Press the Log-in button (FF key).
2. Enter the 4-digit supervisor ID. If a supervisor ID is not entered,
you cannot enter supervisor menu.
Make sure to assign supervisor ID at installation. (Default: [No
assignment])
3. Select a desired menu by using the soft keys from the above
SUPERVISOR MENU
screen.
SYSTEM INFO
MIS REPORT
CUSTOMIZE
→
→
→
DISP SYS INFO
→
4. For further operations, see desired section in this manual.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Displaying System Information
Operation
1. From [SUPERVISOR MENU] screen, press the soft key 5 or 10
SUPERVISOR MENU
to select [DISP SYS INFO].
SYSTEM INFO
MIS REPORT
CUSTOMIZE
→
→
→
DISP SYS INFO
→
2. When the following screen appears, press the ON/OFF button or
hang up the telephone.
HAND UP OR
PRESS ON/OFF
TO DISPL
SYSTEM INFO
3. Group 1 monitoring: Press the soft key 1 or 6 to select Agent
SYSTEM INFO MENU
Group 1.
Group 2 monitoring: Press the soft key 2 or 7 to select Agent
Group 2.
Group 3 monitoring: Press the soft key 3 or 8 to select Agent
Group 3.
AGENT GROUP 1
AGENT GROUP 2
AGENT GROUP 3
SYSTEM
→
→
→
→
4. After selecting one of the above groups, the following menu
selection screen appears. Use soft keys to select a desired item.
This figure shows the case where [AGENT GROUP 1] is
selected.
SYSTEM INFO
AGENT GROUP 1
TRAFFIC INFO
WAITING CALL
AGENT STATUS
→
→
→
5. For further operations, see desired section of this manual.
Note: The [DISP SYS INFO] screen allows you to continue placing and
receiving telephone calls. This function is not available with other
commands.
16
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Common Operation for Supervisor Customization
1) PROG KEY
2) AUTO KEY
3) HOLD KEY
4) FLASH KEY
5) CONF KEY
6) REDIAL KEY
:Returns to Supervisor Top Menu.
:Goes to the upper layer.
:Validates data or goes to the next setting.
:Returns to the previous address number
:Clears data.
:Displays the data before entering program
parameter.
7) PREV/NEXT KEY:Scrolls screens if the address has more than one
screen.
Supervisor Customization
Each item can be customized by operations from the supervisor menu. The
following shows the operation of customization from the supervisor menu.
Operation
1. From [SUPERVISOR MENU] screen, press the soft key 3 or 8 to
SUPERVISOR MENU
select [CUSTOMIZE].
SYSTEM INFO
MIS REPORT
CUSTOMIZE
→
→
→
DISP SYS INFO
→
2. Select a desired menu by using the soft key from the
CUSTOMIZE
MENU
[CUSTOMIZE MENU] screen.
LINE REGIST.
SYSTEM ID
→
→
→
→
→
AGENT ID
GROUP SETTING
CALL HANDLING
3. For further operations, see desired section in this manual.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Direct Incoming Call Setting
Outline
COs and private lines with direct incoming ACD calls to be processed the
same are grouped together as a block. Each block is assigned one of four
ACD Call Handling Programs.
Set the ACD Call Handling Program number to each block, and set the ACD
service call processing method.
Operation
1. From [CUSTOMIZE MENU] screen, press the soft key 1 or 6 to
CUSTOMIZE
MENU
select [LINE REGIST.].
LINE REGIST.
SYSTEM ID
→
→
→
→
→
AGENT ID
GROUP SETTING
CALL HANDLING
2. From [LINE REGIST.] screen, press the soft key 1 or 6 to select
LINE REGIST.
[DIRECT INCOME].
DIRECT INCOME
TRANSF. INCOME
DID ID
→
→
→
→
→
EXT. GROUP
CUSTOMIZE MENU
3. The following screen appears. Press the soft key for desired block
DIRECT INCOME
BL 1ST LST PRG
number.
01 001 003
1
02
03 005 010
04
3
or
18
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
DIRECT INCOME
BL 1ST LST PRG
21
22
23
24
4. Enter the first CO line or private line number using the 10-key
2103:005
pad. (The figure on left shows setting of block No. 03.)
DIRECT INCOME
FIRST LINE NO
(BLOCK03)
CUSTOMIZE MENU
→
→
→
5. Press HOLD key to store first line number.
6. Enter the last CO line or private line number using the 10-key
pad.
2103:010
DIRECT INCOME
LAST LINE NO
(BLOCK03)
CUSTOMIZE MENU
7. Press HOLD key to store last line number.
8. Enter the ACD Call Handling Program number.
2103:3
DIRECT INCOME
PROGRAM NO
(BLOCK03)
CUSTOMIZE MENU
9. To return to [CUSTOMIZE MENU] screen, press the soft key 5
or 10.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Transferring Incoming Call Setting
Outline
COs and private lines with transferred incoming ACD calls to be processed
the same are grouped together as a block. Each block is assigned one of four
ACD Call Handling Programs.
Set the ACD Call Handling Program number to each block, and set the ACD
service call processing method.
Operation
1. From [CUSTOMIZE MENU] screen, press the soft key 1 or 6 to
CUSTOMIZE
MENU
select [LINE REGIST.].
LINE REGIST.
SYSTEM ID
→
→
→
→
→
AGENT ID
GROUP SETTING
CALL HANDLING
2. From [LINE REGIST.] screen, press the soft key 2 or 7 to select
LINE REGIST.
[TRANSF. INCOME].
DIRECT INCOME
TRANSF. INCOME
DID ID
→
→
→
→
→
EXT. GROUP
CUSTOMIZE MENU
3. The following screen appears. Press the soft key for desired block
TRANSF. INCOME
BL 1ST LST PRG
number.
01 001 003
1
02
03 005 010
04
3
or
20
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
TRANSF. INCOME
BL 1ST LST PRG
21
22
23
24
4. Enter the first CO line or private line number using the 10-key
2203:005
pad. (The figure on left shows setting of block No. 03.)
TRANSF. INCOME
FIRST LINE NO
(BLOCK03)
CUSTOMIZE MENU
→
→
→
5. Press HOLD key to store first line number.
6. Enter the last CO line or private line number using the 10-key
pad.
2203:010
TRANSF. INCOME
LAST LINE NO
(BLOCK03)
CUSTOMIZE MENU
7. Press HOLD key to store last line number.
8. Enter the ACD Call Handling Program number.
2203:3
TRANSF. INCOME
PROGRAM NO
(BLOCK03)
CUSTOMIZE MENU
9. To return to [CUSTOMIZE MENU] screen, press the soft key 5
or 10.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Changing Supervisor IDs and User Information Recording ID
Outline
This procedure changes supervisor IDs and user information recording ID.
Setting
Program Address 3101:
Change the ID of Supervisor 1. The ID must be 4 digits. The initial
value should be assigned by your dealer.
Program Address 3102:
Change the ID of Supervisor 2. The ID must be 4 digits. The initial
value should be assigned by your dealer.
Program Address 3201:
Change the ID for user information recording. The ID must be 4 digits.
The initial value should be assigned by your dealer.
Operation
1. From [CUSTOMIZE MENU] screen, press the soft key 2 or 7 to
CUSTOMIZE
MENU
select [SYSTEM ID].
LINE REGIST.
SYSTEM ID
→
→
→
→
→
AGENT ID
GROUP SETTING
CALL HANDLING
2. The 3101 setting screen appears. Enter the 4-digit ID number and
press HOLD key to make setting. Each time the HOLD key is
pressed, the setting changes: 3101→3102→3201.
3101:****
SUPERVISOR
ID NO (1)
CUSTOMIZE MENU
→
3. Press the soft key 5 or 10 to return to [CUSTOMIZE MENU]
screen.
22
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Notice
1. Make certain the supervisor IDs and user information recording
ID are set at installation. Otherwise, you cannot enter
[SUPERVISOR MENU]. Ask your dealer if they are not
assigned.
2. Make sure to record the IDs because they cannot be confirmed
without entering [SUPERVISOR MENU]. Ask your dealer if you
forget.
Registering Agent IDs
Outline
This procedure sets agent ID numbers and their groups.
Setting
Program Address 3301~3364
Set agent ID numbers and agent groups. ID numbers are fixed to 4
digits. Set 1 or 2 as an agent group for each agent.
Operation
1. From [CUSTOMIZE MENU] screen, press the soft key 3 or 8 to
CUSTOMIZE
MENU
select [AGENT ID].
LINE REGIST.
SYSTEM ID
→
→
→
→
→
AGENT ID
GROUP SETTING
CALL HANDLING
2. From [AGENT ID] screen, press the soft key 1 or 6 to select
AGENT ID
[REGISTRATION].
REGISTRAION
→
→
→
CONFIRMATION
CUSTOMIZE MENU
REGISTRATION
01
02
03
04
05
1000
1001
1
1
3. The following screen appears. Press the soft key for desired agent
number.
1002
2
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
or
REGISTRATION
61
62
63
64
1050
1051
2
1
1052
2
4. Enter 4-digit ID number using the 10-key pad. (The figure on left
shows setting of Agent No.01.)
3301:1000
AGENT 01
To clear ID press CONF key.
ID NO
CUSTOMIZE MENU
→
5. Press HOLD key to store ID number.
6. Enter the agent group number (1 or 2) using the 10-key pad.
3301:1
AGENT 01
GROUP NO
(1-3)
CUSTOMIZE MENU
→
7. Press HOLD key to validate for this agent.
8. The next agent number is displayed. Repeat the same procedure
from procedure 4 for next agent if required.
9. To return to the CUSTOMIZE MENU, press the soft key 5 or 10.
Notice
1. Same agent IDs cannot be assigned. You will hear “beep beep”
sound.
2. Same agent and supervisor IDs cannot be assigned. You will hear
“beep beep” sound.
24
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Confirming Agent IDs
Outline
Section 521
This procedure displays the ID numbers of agents which belong to each
group.
Operation
1. From [AGENT ID] screen, press the soft key 3 or 8 to select
AGENT ID
[CONFIRMATION].
REGISTRAION
→
→
→
CONFIRMATION
CUSTOMIZE MENU
2. The screen for selecting group 1, 2 or 3 appears. The number
which follows each group is the number of agents in the group.
Select the agent group whose agent IDs are to be confirmed, by
using soft keys.
CONFIRMATION
GROUP1 XX
GROUP2 XX
GROUP3 XX
→
→
→
Agent group 1: soft key 1or 6
Agent group 2: soft key 2 or 7
CUSTOMIZE MENU
→
Agent group 3: soft key 3 or 8
3. Registered agent ID numbers are displayed (The figure on left
shows a list of agent group 1). To scroll up/down the screen, use
the PREV or NEXT key.
CONFIRMATION
GROUP 1
XXXX
XXXX
XXXX
XXXX
CUSTOMIZE MENU
→
4. To return to [CUSTOMIZE MENU] screen, press the soft key 5
or
or 10.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Setting on Service Flow Details
Outline
This procedure makes a variety of settings such as service flow setting,
separately for agent group 1 and agent group 2.
Operation
1. From [CUSTOMIZE MENU] screen, press the soft key 4 or 9
CUSTOMIZE
MENU
select [GROUP SETTING].
LINE REGIST.
SYSTEM ID
→
→
→
→
→
AGENT ID
GROUP SETTING
CALL HANDLING
2. From [GROUP SETTING] screen, use soft keys to select the
agent group to be set.
GROUP SETTING
Agent group 1: soft key 1 or 6
Agent group 2: soft key 2 or 7
Agent group 3: soft key 3 or 8
GROUP1
GROUP2
GROUP3
→
→
→
CUSTOMIZE MENU
→
3. First setting (3401) for the selected group is displayed. Enter a set
value, then press the HOLD key to validate setting. Every time
the HOLD key is pressed without set values specified, the next
setting item is displayed. Press FL/R key to return to the previous
setting.
3401:1
GROUP 1
1:LEAST BUSY
2:LONGEST IDLE
CUSTOMIZE MENU
→
4. To return to [CUSTOMIZE MENU] screen, press the soft key 5
or 10.
Setting
If the first two digits of a setting number is [34], the setting pertains to group
1, [35], to group 2 and [36], to group 3. The following explanation, therefore,
shows group 1/group 2/group 3 settings.
Program Address 3401/3501/3601: Agent search method
Set the agent search method. Select either of the following:
1: LEAST BUSY FIRST setting. This mode first selects the agent
whose busy rate (total busy time/total Login time) is the lowest
in the group for the day.
26
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
2: NEXT AVAILABLE FIRST setting. This mode selects the
agent which is placed in idle status for the longest duration
following the last talking status.
Note: For both 1&2, only ACD calls will be counted as busy time or busy
status.
Program Address 4101-4104: ACD Call Handling Program
Commands are used to set any call distribution operation to ACD Call
Handling Program numbers (4101 to 4104).
Program Address 4201-4204: Transferring Voice Mail access number
Sets the voice mail extension line number and access code corresponding to
the transfer destination voice mail number (1 to 4).
Supervisor Monitoring
The ACD system can be monitored by the supervisor. Note that data is
updated every 10 seconds while the monitoring screen is displayed.
Operation
Details are given in each feature section. The following shows the operation
of the supervisor monitoring from the [SUPERVISOR MENU] screen:
1. From the [SUPERVISOR MENU] screen:
Group 1 monitoring: Press the soft key 1 or 6 to select [SYSTEM
INFO (G1)].
SUPERVISOR MENU
SYSTEM INFO
MIS REPORT
CUSTOMIZE
→
→
→
DISP SYS INFO
→
SYSTEM INFO
2. Group 1 monitoring: Press the soft key 1 or 6 to select Agent
Group 1.
AGENT GROUP1
AGENT GROUP2
AGENT GROUP3
→
Group 2 monitoring: Press the soft key 2 or 7 to select Agent
Group 2.
→
→
Group 3 monitoring: Press the soft key 3 or 8 to select Agent
Group 3.
3. After selecting one of the above groups, the following menu
selection screen appears. Use soft keys to select a desired item.
This figure shows the case where [AGENT GROUP 1] is
selected.
SYSTEM INFO
AGENT GROUP 1
TRAFFIC INFO
WAITING CALL
AGENT STATUS
→
→
→
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
4. Select desired menu. For further operations, see next page.
Traffic Information
Operation
1. From [SYSTEM INFO] screen, press the soft key 1 or 6 to select
SYSTEM INFO
AGENT GROUP 1
[TRAFFIC INFO.].
TRAFFIC INFO
WAITING CALL
AGENT STATUS
→
→
→
2. The following screen appears.
TRAFFIC INFO
AGENT GROUP 1
TOTAL CALLS
MAX WAIT
XX
(X)XXXS
XX
LOGIN AGENT
AVAILABLE
XX
3. Press the AUTO key to return to the [SYSTEM INFO.] screen.
Press the PROG key to return to the [SUPERVISOR MENU]
screen.
Screen explanation
TOTAL CALLS : Total number of current incoming calls via the ACD
system
MAX WAIT
: The longest time of a current incoming call via the ACD
system is placed in wait status, not connected to an agent.
The unit is in seconds.
LOGIN AGENT : The number of current log in agents.
AVAILABLE : The number of agents who are available.
28
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Waiting Call
Operation
Section 521
1. From [SYSTEM INFO] screen, press the soft key 2 or 7 to select
SYSTEM INFO
AGENT GROUP 1
[WAITING CALL].
TRAFFIC INFO
WAITING CALL
AGENT STATUS
→
→
→
2. The following screen appears.
WAITING CALL
AGENT GROUP 1
TRK
XXX
XXX
XXX
XXX
TIME 01/XX
XXXXS
XXXXS
XXXXS
XXXXS
3. Press the NEXT key to scroll down/PREV key to scroll up the
or
screen.
4. Press the AUTO key to return to the [SYSTEM INFO] screen.
Press the PROG key to return to the [SUPERVISOR MENU]
screen.
Screen explanation
TRK column: CO Line numbers for calls currently in wait status.
TIME column: Time of the call is placed in wait status.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Agent Status
Operation
1. From [SYSTEM INFO] screen, select the soft key 3 or 8 to select
SYSTEM INFO
AGENT GROUP 1
[AGENT STATUS].
TRAFFIC INFO
WAITING CALL
AGENT STATUS
→
→
→
2. The following screen appears.
AGENT STATUS INF
AGENT GROUP 1
LOGIN AGENT
AVAILABLE
XX
XX
XX
XX
XX
BUSY(ACD CALL)
BUSY(NOT-ACD)
IDLE AGENT
3. Press the NEXT key for additional information.
AGENT STATUS INF
AGENT GROUP 1
ID
EXT STATUS
XXXX XXXXX
XXXX XXXXX
XXXX XXXXX
XXXX XXXXX
XXXX
XXXX
XXXX
XXXX
4. Press the NEXT key to scroll down, PREV key to scroll up.
or
AGENT STATUS INF
AGENT GROUP 1
ID
EXT STATUS
XXXX XXXXX
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
XXXX
XXXXX
XXXXX
XXXXX
5. Press the AUTO KEY to return to the [SYSTEM INFO] screen.
Press the PROG key to return to the [SUPERVISOR MENU]
screen.
30
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Screen explanation
A. First screen
LOGIN AGENT: Number of agents that have logged in.
AVAILABLE: Number of log-in agents in AVAILABLE status.
BUSY(ACD CALL): Number of agents engaged in incoming calls via the
ACD system.
BUSY (NON-ACD): Number of agents engaged in calls other than the above
BUSY (ACD CALL) calls.
IDLE AGENT: Number of agents ready to answer incoming calls.
B. Second and the subsequent screens
ID column: Agent IDs.
EXT column: Extension numbers used by agents.
STATUS column: Current agent status.
Meaning of the display is as follows:
Avail: The agent is in the AVAILABLE status.
Unav.: The agent is in the UNAVAILABLE status.
ACD: The agent is engaged in incoming calls via the ACD system.
N-ACD: The agent is engaged in calls other than the above ACD calls.
MIS Report Features
MIS Report Outline
The MIS Report feature provides the Supervisor with a variety of reports.
Activity of each agent, system, or a group is tabulated on an hour, day, or
week (Monday to Sunday) basis. Data is saved for 14 days.
Printing order is issued from the Supervisor monitor telephone. For details,
see [MIS Report Operation]. Output destination is an RS-232C-compatible
printer or an RS232C-compatible personal computer (PC). To enable output
to a PC, communication software is required. For details on the MIS output
and connection, see the Installation Manual.
Notice
1. MIS report data memory is saved for only 14 days regardless of main
cabinet’s power switch status of past 14 days.
2. If the date and time of the main unit is changed, MIS report will not be
accurate. In this case, output MIS report in advance, and clear the data (See
Other Features/Data Clear)
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
3. MIS report which includes present time (for example 19:30), will be
incomplete (report up to 19:00).
4. Two supervisors cannot output the MIS report simultaneously.
5. The MIS report data cannot be cleared if another supervisor has been
entering the MIS REPORT MENU.
6. Two supervisors cannot enter the MIS REPORT MENU and CUSTOMIZE
MENU simultaneously.
7. The definition of an ACD talk time is a time span from a call picked up to
an end of a conversation or transferring to another extension.
8. If a non-Agent picks up an ACD call, MIS report will not be accurate.
Therefore, the Manufacturer recommends not to assign ACD lines to FF
keys.
The following gives an outline of the MIS report output.
Agent Activity
The following reports are tabulated on a per agent basis:
•
Total Log-in Time, Unavailable Time, Talk Time, Idle Time &
Percentage (IDLE Time=LOGIN Time-TALK Time)
Average time from call incoming to answer.
•
•
Number of incoming calls, number of answered calls
Group Activity
The following reports are tabulated on a per group basis:
•
•
Total Log-in Time, Unavailable Time, Talk Time, Idle Time &
Percentage (IDLE=LOGIN-TALK)
Number of incoming calls, number of answered calls
System Activity
The following reports are tabulated on a per system basis:
•
•
Total Log-in Time, Unavailable Time, Talk Time, Idle Time &
Percentage (IDLE=LOGIN-TALK)
Number of incoming calls, number of answered calls
Work Unit Count
The following report is tabulated:
Number of per-code calls (tabulated on a daily/weekly basis for each group/
system)
32
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
MIS Function Tabulation Unit
MIS report is output in the following cycles:
•
•
Hourly report:
Specified date(s) can be output on an hourly (0-24) basis.
Daily report:
Data for previous week/this week can be output on a daily basis.
The oldest available data is Monday of previous week.
Weekly report:
•
Data for both previous and this weeks are output on a weekly basis.
The following shows available report.
Table 5.
TOTAL UNAVAIL
AVERAGE
RINGING
TIME
TALK
TIME
IDLE INCOMING ANSWER
LOGIN
TIME
ABLE
TIME
TIME
CALLS
CALLS
Group
Agent
(1~64)
HOURLY
DAILY
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
×
!
!
×
×
×
×
×
×
WEEKLY
HOURLY
DAILY
Group
(1,or 2)
WEEKLY
HOURLY
DAILY
System
WEEKLY
! : Available to report
× : Unavailable to report
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
The following shows the tabulation unit of WORK UNIT COUNT.
Total count per code is shown in the following tabulation unit:
Table 6.
Unit
Code 1 Code 2 Code 3
----
Code 20
Group 1 DAILY
WEEKLY
Group 2 DAILY
WEEKLY
DAILY
WEEKLY
System
MIS Report Operation
• Common Operation of MIS Report
MIS reports can be output by operations from the Supervisor. The following
shows the MIS report output operation from [SUPERVISOR MENU]:
Operation
1. From [SUPERVISOR MENU] screen, press the soft key 2 or 7 to
select [MIS REPORT].
SUPERVISOR MENU
[MIS REPORT MENU] screen appears.
SYSTEM INFO
MIS REPORT
CUSTOMIZE
→
→
→
MIS REPORT MENU
←
AGENT REPORT
GROUP REPORT
SYSTEM REPORT
WORK UNIT
→
←
←
←
←
→
→
→
→
OTHERS
2. Select a desired menu by using the soft keys from the above
screen.
34
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
ACD Supervisor Mode Menu Flow Chart
Figure 4.
MAIN SUPERVISOR MENU
SYSTEM
INFORMATION
TRAFFIC INFORMATION
WAITING CALL
AGENT STATUS
A
B
AGENT REPORT
PERSONAL
HOURLY
DAILY
MIS REPORT
(INPUT START DATE
AND LAST DATE)
THIS WEEK
LAST WEEK
ALL
(Agent ID
code input)
C
WEEKLY
ALL AGENT
D
E
HOURLY
DAILY
(INPUT START DATE
AND LAST DATE)
THIS WEEK
LAST WEEK
ALL
F
WEEKLY
GROUP REPORT
GROUP1
G HOURLY
(INPUT START DATE AND LAST DATE)
H
DAILY
THIS WEEK
LAST WEEK
ALL
I WEEKLY
GROUP2
HOURLY
DAILY
(INPUT START DATE AND LAST DATE)
THIS WEEK
LAST WEEK
ALL
WEEKLY
J HOURLY
(INPUT START DATE
AND LAST DATE)
SYSTEM REPORT
K
DAILY
THIS WEEK
LAST WEEK
ALL
L
WEEKLY
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
MDAILY
N WEEKLY
DAILY
GROUP1
GROUP2
GROUP2
WORK UNIT COUNT
WEEKLY
DAILY
WEEKLY
OUTPUT QUIT
STATUS/CANCEL
MIS DATA CLEAR
OTHERS
DIRECT INCOME
TRANSF. INCOME
ACD CUSTOMIZE
LINE REGIST.
SYSTEM ID
AGENT ID
REGISTRATION
CONFIRMATION
GROUP 1
GROUP 2
GROUP SETTING
CALL HANDLING
PROGRAM
PROGRAM 1
PROGRAM 2
PROGRAM 3
PROGRAM 4
VM NUMBER
• Output of MIS Report Data
The following explains the procedure for outputting each function. The
procedures below are operations from [MIS REPORT MENU] screen.
Agent Report
A. Hourly tabulation of each agent
1. From [MIS REPORT] screen, press the soft key 1 or 6 to select
MIS REPORT MENU
[AGENT REPORT].
←
←
←
←
←
AGENT REPORT
GROUP REPORT
SYSTEM REPORT
WORK UNIT
→
→
→
→
→
OTHERS
AGENT REPORT
←
←
PERSONAL
ALLAGENT
→
→
2. The following screen appears. Press the soft key 1 or 6 to select
[PERSONAL].
MIS REPORT MENU
36
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Pressing the soft key 5 or 10 returns to [MIS REPORT MENU]
screen (the same for the subsequent screens).
3. The following screen appears. Enter the 4-digit ID code of the
AGENT ID:XXXX
target agent by using the 10-key pad.
ENTER THE AGENT
ID CODE AND
PRESS HOLD KEY
MIS REPORT MENU
→
4. The following screen appears. Press the soft key 1 or 6 to Select
AGENT ID:XXXX
[HOURLY].
←
←
←
HOURLY
DAILY
→
→
→
WEEKLY
MIS REPORT MENU
→
5. The following screen appears. Enter the starting date and ending
date of the data to be output. First enter the starting date, press
HOLD key to validate, then enter the ending date and press
HOLD key again. No month is needed to be entered. For
example, data for a period beginning with April 25 and ending
with May 2, Enter 25 as the starting date, 2 as the ending date. For
1 through 9, 01 through 09 can be entered instead.
START DATE:
ENTER THE START
DATE (DD) AND PRESS
HOLD KEY
MIS REPORT MENU
→
First date input + HOLD key + Last date input + HOLD
key
LAST DATE:
ENTER THE LAST
DATE (DD) AND PRESS
HOLD KEY
MIS REPORT MENU
→
6. Once the input data is validated, the data output starts. The
following screen appears while the output is in progress. To abort
output, see the section [MIS data output abort] section of, [Other
Features].
MIS OUTPUT
AGENT ID:XXXX
HOURLY REPORT
FROM XX TO XX
MIS REPORT MENU
→
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
B. Daily tabulation of each agent
Steps 1 to 3 are the same as those for item A.
4. The following screen appears. Press the soft key 2 or 7 to Select
AGENT ID:XXXX
[DAILY].
←
←
←
HOURLY
DAILY
→
→
→
WEEKLY
MIS REPORT MENU
→
5. The following screen appears. Press the soft key 1 or 6 for [THIS
AGENT ID:XXXX
WEEK], 2 or 7 for [LAST WEEK], 3 or 8 for [ALL].
←
←
←
THIS WEEK
LAST WEEK
ALL
→
→
→
MIS REPORT MENU
→
6. Once the input data is validated, the data output starts. The
following screen appears while the output is in progress. To abort
output, see the [MIS data output abort] section, [Other Features].
(The figure on left shows outputting of this week)
MIS OUTPUT
AGENT ID:XXXX
DAILY REPORT
THIS WEEK
MIS REPORT MENU
→
C. Weekly tabulation of each agent
Steps 1 to 3 are the same as those for item A.
4. The following screen appears. Press the soft key 3 or 8 to select
AGENT ID:XXXX
[WEEKLY].
←
←
←
HOURLY
DAILY
→
→
→
WEEKLY
MIS REPORT MENU
→
5. Once the input data is validated, the data output starts. The
following screen appears while the output is in progress. To abort
output, see the section [MIS data output abort], section, [Other
Features]
MIS OUTPUT
AGENT ID: XXXX
WEEKLY REPORT
MIS REPORT MENU
→
38
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
D. Hourly tabulation of all agents
E. Daily tabulation of all agents
F. Weekly tabulation of all agents
Step 1 is the same as that for items A.
2. From the following screen, press the soft key 2 or 7 to select
AGENT REPORT
[ALL AGENT].
←
←
PERSONAL
→
→
ALL AGENT
MIS REPORT MENU
3. The following screen appears. Press the soft key 1 or 6 to select
[HOURLY], 2 or 7 to select [DAILY], 3 or 8 to select
[WEEKLY].
ALL AGENT
←
←
←
HOURLY
DAILY
→
→
→
WEEKLY
MIS REPORT MENU
→
4. Follow steps 5 and 6 of item A for [HOURLY].
Follow steps 5 and 6 of item B for [DAILY].
Follow steps 5 of item C for [WEEKLY].
Group Report
G. Hourly tabulation of group report
H. Daily tabulation of group report
I. Weekly tabulation of group report
1. From [MIS REPORT] screen, press the soft key 2 or 7 to select
MIS REPORT MENU
[GROUP REPORT].
←
←
←
←
←
AGENT REPORT
GROUP REPORT
SYSTEM REPORT
WORK UNIT
→
→
→
→
→
OTHERS
2. The following screen appears. Press the soft key 1 or 6, 2 or 7 or
3 or 8 to select [GROUP1/GROUP2/GROUP3]. Pressing the soft
key 5 or 10 returns to [MIS REPORT MENU] screen (the same
for the subsequent screens).
GROUP REPORT
←
←
GROUP 1
GROUP 2
GROUP 3
→
→
→
The following procedure assumes that [GROUP 1] is selected:
MIS REPORT MENU
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
3. The following screen appears. Press the soft key 1 or 6 to select
[HOURLY], 2 or 7 to select [DAILY], 3 or 8 to select
[WEEKLY].
GROUP1 REPORT
←
←
←
HOURLY
DAILY
→
→
→
WEEKLY
MIS REPORT MENU
→
4. Follow steps 5 and 6 of item A for [HOURLY].
Follow steps 5 and 6 of item B for [DAILY].
Follow steps 5 of item C for [WEEKLY].
System Report
J. Hourly tabulation of system report
K.Daily tabulation of system report
L.Weekly tabulation of system report
1. From [MIS REPORT] screen, press the soft key 3 or 8 to select
MIS REPORT MENU
[SYSTEM REPORT].
←
←
←
←
←
AGENT REPORT
GROUP REPORT
SYSTEM REPORT
WORK UNIT
→
→
→
→
→
2. The following screen appears. Press the soft key 1 or 6 to select
[HOURLY], 2 or 7 to select [DAILY], 3 or 8 to select
[WEEKLY].
OTHERS
SYSTEM REPORT
←
←
←
←
HOURLY
DAILY
→
→
→
→
3. Follow steps 5 and 6 of item A for [HOURLY].
Follow steps 5 and 6 of item B for [DAILY].
Follow steps 5 of item C for [WEEKLY].
WEEKLY
DISC. CALL
MIS REPORT MENU
Work Unit Count
M. Daily tabulation of work unit count
1. From [MIS REPORT] screen, press the soft key 4 or 9 to select
MIS REPORT MENU
[WORK UNIT].
←
←
←
←
←
AGENT REPORT
GROUP REPORT
SYSTEM REPORT
WORK UNIT
→
→
→
→
→
OTHERS
40
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
2. The following screen appears. Press the soft key 1, 2 or 3, or 5, 6
or 7 to select [GROUP1/GROUP2/SYSTEM]. GROUP1
represents Agent Group 1 and GROUP2 represents Agent Group
2. SYSTEM represents the total sum of Group 1 and Group 2.
The following procedure assumes that Group 1 is selected (the
operation is the same if another option is selected).
WORK UNIT COUNT
←
←
←
←
GROUP 1
GROUP 2
GROUP 3
SYSTEM
→
→
→
→
→
MIS REPORT MENU
3. The following screen appears. Press the soft key 2 or 7 to select
WORK UNIT COUNT
AGENT GROUP 1
[DAILY].
←
DAILY
→
←
WEEKLY
→
MIS REPORT MENU
→
4. From the following screen, press the soft key 1, 2, 3 or 6, 7, 8 to
select [THIS WEEK], [LAST WEEK], [ALL].
When [THIS WEEK] is selected, data is output from Monday of
this week.
WORK UNIT COUNT
AGENT GROUP 1
←
THIS WEEK
LAST WEEK
ALL
→
←
←
→
→
When [LAST WEEK] is selected, data is output from Monday to
Sunday of last week.
When [ALL] is selected, all data from Monday of last week will
be output.
MIS REPORT MENU
→
5. Once the input data is validated, the data output starts. The
following screen appears while the output is in progress. To abort
output, see the section [MIS data output abort] section, [Other
Features].
MIS OUTPUT !
AGENT GROUP 1
WORK UNIT COUNT
DAILY REPORT
THIS WEEK
MIS REPORT MENU
→
N. Weekly tabulation of work unit count
Steps 1 to 2 are the same as those for item M.
3. The following screen appears. Press the soft key 3 or 8 to select
WORK UNIT COUNT
AGENT GROUP 1
[WEEKLY].
←
←
DAILY
→
→
WEEKLY
MIS REPORT MENU
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
4. Once the input data is validated, the data output starts. The
following screen appears while the output is in progress. To abort
output, see the section [MIS data output abort] of [Other
Features].
MIS OUTPUT !
AGENT GROUP 1
WORK UNIT COUNT
WEEKLY REPORT
MIS REPORT MENU
→
Other Features (Data Clear and Output Cancel)
O. MIS data clear
* This feature clears all MIS data.
1. From [MIS REPORT] screen, press the soft key 5 or 10 to select
MIS REPORT MENU
[OTHERS].
←
AGENT REPORT
GROUP REPORT
SYSTEM REPORT
WORK UNIT
→
←
←
←
←
→
→
→
→
OTHER
2. The following screen appears. Press the soft key 3 or 8 to select
OTHERS
[MIS DATA CLEAR].
STATUS/CANCEL
MIS DATA CLEAR
MIS REPORT MENU
→
→
→
3. The following screen appears. To clear data, press 0 and HOLD
MIS DATA CLEAR:
keys. This starts data clear processing.
PRESS 0 AND HOLD
KEY TO CLEAR ALL
MIS DATA
MIS REPORT MENU
→
MIS DATA CLEARED
4. Once data clear is completed, the following screen appears.
Pressing the soft key 5 or 10 returns to [MIS REPORT MENU]
screen.
MIS REPORT MENU
→
42
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
P. MIS data output confirmation/cancel
* This feature confirms/cancels MIS data output.
1. Step 1 is the same as that for item O.
2. The following screen appears. Press the soft key 1 or 6 to select
OTHERS
[STATUS/CANCEL].
STATUS/CANCEL
MIS DATA CLEAR
MIS REPORT MENU
→
3. The following screen appears to show the current MIS data output
status on the Large Display (end of confirmation). To abort MIS
data output, press the soft key 4 or 9 to select [QUIT]. The
following screen assumes that daily report of Agent ID XXXX is
being output.
OUTPUT STATUS
AGENT ID:XXXX
HOURLY REPORT
FROM XX TO XX
QUIT
→
→
MIS REPORT MENU
4. The following screen appears. To quit, press 0 and HOLD keys.
OUTPUT QUIT:_
TO STOP MIS DATA
OUTPUT. PRESS 0
AND HOLD KEY
MIS REPORT MENU
→
5. Once output is cancelled, the following screen appears. Pressing
QUIT
the soft key 5 or 10 returns to [MIS REPORT MENU] screen.
MIS REPORT MENU
→
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
User Information Recording
The following (Figure 5) shows the service flow for recording user
information messages. Voice output ports of the ACD system can be directly
accessed to register, confirm, change, or delete messages. The maximum
recording length of each service information message is 14 seconds. Up to 6
kinds of information messages can be registered per ACD system.
After recording your information message(s), select which information
message to be sent to an outside party by entering parameter on service Flow
Details (Figure 2).
Related program addresses are:
4101 - 4104: ACD Call Handling Program
4201 - 4204: Transferring Voice Mail access number
Notice
Even if your message are recorded, using Figure 5, user information numbers
(1-6) must be selected for above program addresses.
If they are not selected, initial messages will be sent.
44
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Figure 5.
Call the extension
number of the voice
output port.
“This is ACD user information
recording service. Please enter the
password and press #”.
Password error is followed by three
short beeps. →Reenter password.
→Three error count releases call
(BT).
ACD answers
Password input
“Incorrect password. Please hang
up”.
“Please enter the information num-
ber, and press #”.
¨
Information number input
(1 to 6)
“Please enter the service
code. To start recording,
press 1 and #, to play a
recorded message, press 3
and #, to delete, press 5
and #”.
Service code input
3 #: Play back
Please start
recording
your
1 #: Recording
Start recording
5 #: Deletion
information
information
message. To
finish
Message
play back
Deletion
Recording ends
by 7 # or
time-out.
recording,
press 7
and #.
“The message
has been
deleted.”
Message
play back
The message
has been deleted.
The message
has been recorded
“The message
has been
recorded.”
¨
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
Agent Features
Log-in / Log-out
Log-in procedure
1. Press the LOGIN key then, press the AGENT ID CODE.
2. The LED lights in green to notify completion of log-in.
3. Press ON/OFF key after the completion of log-in.
Notice
1. LOGIN key must be assigned in advance (See key Assignment).
2. Entering an unregistered agent ID code displays an error. In this
case, do the procedure from the beginning again after pressing
ON/OFF key.
3. Do not Log-in or Log-out while placing a call on hold.
If the extension is already logged in, another agent cannot log in
using his/her agent ID. The Current agent must log out once to log
in again.
Log-out procedure
1. Press the LOGIN key while the key LED is illuminated in green.
2. The key LED goes off to notify the completion of log-out.
3. Press ON/OFF key.
46
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Available/Unavailable
Pressing the UNAVAILABLE key from an idle terminal which is logged in
places the extension in the Unavailable status temporarily. This
UNAVAILABLE excludes the telephone from candidates of ACD incoming
calls. Pressing the key again returns the telephone into the Available status.
This key’s LED illuminates in green for the Available status and red for the
Unavailable status. Same as the LOGIN key, the UNAVAILABLE key LED
goes off with log-out procedure.
Operation
To activate UNAVAILABLE status:
Press the green/UNAVAILABLE key (the key LED illuminates in red).
To return to AVAILABLE status:
Press the red/UNAVAILABLE key (the key LED illuminates in green).
Notice
1. UNAVAILABLE key must be assigned in advance (See key
Assignment).
2. If an agent does not answer an ACD incoming call before a
specific time (Initial: 10 sec.), the agent will become
UNAVAILABLE automatically.
Work Unit Count
Work Unit Codes can be preset with the Work Unit Count key. When used,
the appear in the MIS report. For example, 01 for claims 02 for sales, 03 for
brochure. A maximum of 20 codes can be entered (set at installation).
Operation
1. Press Work Unit key while ACD call.
This lights the LED in red. Pressing the key again turns off the
LED and deletes code. The number of codes per call is not
restricted (multiple count is allowed).
Notice
1. The Work Unit Count key is effective only from an agent
telephone and while the telephone is engaged in an ACD call.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 521
Built-In ACD Supervisor Guide
2. When the call is placed on hold, the LED remains on. It goes off if
another telephone retrieves the call placed on hold. If the same
telephone retrieves the call placed on hold the LED remains on,
and goes off when the call is released.
Zip Tone
Zip mode automatically answers calls when an agent is using the Headset
mode. With the Zip mode enabled, the agent hears a brief alert tone via the
headset before the system automatically answers the incoming call.
Operation
Setting
The user hears the notification (ZIP) tone and the call is automatically
connected.
When in Headset mode:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Dial 80 to toggle ZIP Mode ON and OFF.
4. The telephone LCD panel displays ZIP MODE ON or ZIP
MODE OFF.
Notes:
1. Call Forwarding takes precedence over the Zip mode.
Key Assignment
Assign the following keys to the Flexible Function (FF) keys of each
telephone (setting at installation work). You must not assign more or less than
one LOGIN or AVAILABLE key to one telephone:
• LOGIN (mandatory)
• UNAVAILABLE (mandatory)
• WORK UNIT COUNT (01-20: optional)
48
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
Setting
1. Press the ON/OFF key and PROG key.
2. Select a vacant FF key.
3. Press REDIAL key.
4. Select to feature code to assign.
Fixed Feature Code
+ (additional digits to program into key)
Feature Description
ACD-1 Log-In/Out Key
∗#80
ACD-1 Work Unit Key
ACD-1 Unavailable Key
ACD-2 Log-In/Out Key
ACD-2 Work Unit Key
ACD-2 Unavailable Key
∗#81 + (Work Unit 01-20)
∗#82
∗#85
∗#86 + (Work Unit 01-20)
∗#87
ACD Silent Monitor Key (two touch) 77 + desired extension (DBS 576 only)
ACD Silent Monitor Key (one touch) 77 (DBS 576 only)
Zip Tone Mode ON/OFF Key
∗73
5. Press HOLD key to store.
6. Press ON/OFF key to end.
Notice
1. If an FF key selected in setting 2 is not vacant (Pre-assigned), the
previous setting will be erased automatically.
2. To confirm an FF key assignment, press ON/OFF-CONF-FF
key.
3. To delete an FF key assignment, skip procedures 3 & 4 of setting
procedure.
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Built-In ACD Supervisor Guide
Section 521
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
ACD Call Handling Program........................................4
Activating Supervisor Menu.......................................15
Agent Features ............................................................46
Data Clear ...................................................................42
DELETE (FF3) ...........................................................10
Agent IDs
Confirming ..............................................................25
Registering ..............................................................23
E
Agent Report...............................................................36
Agent Status ................................................................30
ALL DELETE (FF6)...................................................11
Available/Unavailable.................................................47
Features
B
Basic Service Flow........................................................3
C
Call Handling Program .................................................4
Call Setting
Direct Incoming.......................................................18
Transferring Incoming.............................................20
Information Recording
Changing Supervisor IDs and User Information Record-
ing ID............................................................22
User.........................................................................44
Commands
Programming.............................................................6
Common Operation for Supervisor Customization ....16
Configuration ................................................................1
Confirming Agent IDs ................................................25
Customization
Supervisor................................................................17
576-3.6-521 (ACD 4.0)
DBS 576 (USA) issued October 2000
Index-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Built-in ACD Supervisor Guide
INSERT (FF2)...............................................................9
S
Service Flow .................................................................3
K
Service Flow Details
L
Log-in / Log-out..........................................................46
Supervisor ID
Changing.................................................................22
M
Supervisor Menu
Activating................................................................15
MIS Report Data
Supervisor Monitoring................................................27
System Report.............................................................40
MIS Report Features ...................................................31
MIS Report Operation.................................................34
MIS Report Outline.....................................................31
Monitoring ..................................................................27
T
Traffic Information .....................................................28
Transfer Destination Voice Number...........................11
Transferring Incoming Call Setting ............................20
O
Other Features (Data Clear and Output Cancel) .........42
Output of MIS Report Data.........................................36
U
Unavailable .................................................................47
User Information Recording .......................................44
P
Programming by Commands ........................................6
W
R
Waiting Call................................................................29
Work Unit Count ..................................................40, 47
RAD ..............................................................................7
Recording
User Information.....................................................44
Registering Agent IDs.................................................23
Z
Report Operation
MIS..........................................................................34
Zip Tone......................................................................48
Report Outline
MIS..........................................................................31
Index-2
DBS 576 (USA) issued October 2000
576-3.6-521 (ACD 4.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
|