Panasonic Security Camera BL C20 User Manual

Operating Instructions  
Indoor Use Only  
Network Camera  
Model No.  
BL-C20  
Please read this manual before using, and save this manual for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Trademarks  
Adobe, Acrobat and Reader are either registered trademarks or trademarks of  
Adobe Systems Incorporated in the United States and/or other countries.  
Microsoft, Windows, Hotmail and ActiveX are either registered trademarks or  
trademarks of Microsoft Corporation in the United States and/or other  
countries.  
Screen shots reprinted with permission from Microsoft Corporation.  
All other trademarks identified herein are the property of their respective  
owners.  
This software is based in part on the work of the Independent JPEG Group.  
Abbreviations  
UPnP is the abbreviation for "Universal Plug and Play".  
"Network Camera" is called "camera" in this manual.  
"Setup CD-ROM" is called "CD-ROM" in this manual.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Precaution  
Information on Disposal for Users of Waste Electrical &  
Electronic Equipment (private households)  
This symbol on the products and/or accompanying documents  
means that used electrical and electronic products should not be  
mixed with general household waste.  
For proper treatment, recovery and recycling, please take these  
products to designated collection points, where they will be  
accepted on a free of charge basis. Alternatively, in some  
countries you may be able to return your products to your local  
retailer upon the purchase of an equivalent new product.  
Disposing of this product correctly will help to save valuable resources and  
prevent any potential negative effects on human health and the  
environment which could otherwise arise from inappropriate waste  
handling. Please contact your local authority for further details of your  
nearest designated collection point.  
Penalties may be applicable for incorrect disposal of this waste, in  
accordance with national legislation.  
For business users in the European Union  
If you wish to discard electrical and electronic equipment, please contact  
your dealer or supplier for further information.  
Information on Disposal in other Countries outside the  
European Union  
This symbol is only valid in the European Union.  
If you wish to discard this product, please contact your local authorities or  
dealer and ask for the correct method of disposal.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Informations relatives à l’évacuation des déchets,  
destinées aux utilisateurs d’appareils électriques et  
électroniques (appareils ménagers domestiques)  
Lorsque ce symbole figure sur les produits et/ou les documents  
qui les accompagnent, cela signifie que les appareils  
électriques et électroniques ne doivent pas être jetés avec les  
ordures ménagères.  
Pour que ces produits subissent un traitement, une  
récupération et un recyclage appropriés, envoyez-les dans les  
points de collecte désignés, où ils peuvent être déposés  
gratuitement. Dans certains pays, il est possible de renvoyer les produits au  
revendeur local en cas d’achat d’un produit équivalent.  
En éliminant correctement ce produit, vous contribuerez à la conservation  
des ressources vitales et à la prévention des éventuels effets négatifs sur  
l’environnement et la santé humaine qui pourraient survenir dans le cas  
contraire.  
Afin de connaître le point de collecte le plus proche, veuillez contacter vos  
autorités locales.  
Des sanctions peuvent être appliquées en cas d’élimination incorrecte de  
ces déchets, conformément à la législation nationale.  
Utilisateurs professionnels de l’Union européenne  
Pour en savoir plus sur l’élimination des appareils électriques et  
électroniques, contactez votre revendeur ou fournisseur.  
Informations sur l’évacuation des déchets dans les pays  
ne faisant pas partie de l’Union européenne  
Ce symbole n’est reconnu que dans l’Union européenne.  
Pour vous débarrasser de ce produit, veuillez contacter les autorités locales  
ou votre revendeur afin de connaître la procédure d’élimination à suivre.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Benutzerinformationen zur Entsorgung von elektrischen  
und elektronischen Geräten (private Haushalte)  
Entsprechend den grundlegenden Firmengrundsetzen der  
Panasonic-Gruppe wurde ihr Produkt aus hochwertigen  
Materialien und Komponenten entwickelt und hergestellt, die  
recycelbar und wieder verwendbar sind.  
Dieses Symbol auf Produkten und/oder begleitenden  
Dokumenten bedeutet, dass elektrische und elektronische  
Produkte am Ende ihrer Lebensdauer vom Hausmüll getrennt  
entsorgt werden müssen.  
Bringen Sie bitte diese Produkte für die Behandlung,  
Rohstoffrückgewinnung und Recycling zu den eingerichteten kommunalen  
Sammelstellen bzw. Wertstoffsammelhöfen, die diese Geräte kostenlos  
entgegennehmen.  
Die ordnungsgemäße Entsorgung dieses Produkts dient dem  
Umweltschutz und verhindert mögliche schädliche Auswirkungen auf  
Mensch und Umwelt, die sich aus einer unsachgemäßen Handhabung der  
Geräte am Ende Ihrer Lebensdauer ergeben könnten.  
Genauere Informationen zur nächstgelegenen Sammelstelle bzw.  
Recyclinghof erhalten Sie bei Ihrer Gemeindeverwaltung.  
Für Geschäftskunden in der Europäischen Union  
Bitte treten Sie mit Ihrem Händler oder Lieferanten in Kontakt, wenn Sie  
elektrische und elektronische Geräte entsorgen möchten. Er hält weitere  
Informationen für sie bereit.  
Informationen zur Entsorgung in Ländern außerhalb der  
Europäischen Union  
Dieses Symbol ist nur in der Europäischen Union gültig.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Informazioni per gli utenti sullo smaltimento di  
apparecchiature elettriche ed elettroniche obsolete (per i  
nuclei familiari privati)  
Questo simbolo sui prodotti e/o sulla documentazione di  
accompagnamento significa che i prodotti elettrici ed elettronici  
usati non devono essere mescolati con i rifiuti domestici  
generici.  
Per un corretto trattamento, recupero e riciclaggio, portare  
questi prodotti ai punti di raccolta designati, dove verranno  
accettati gratuitamente. In alternativa, in alcune nazioni  
potrebbe essere possibile restituire i prodotti al rivenditore locale, al  
momento dell’acquisto di un nuovo prodotto equivalente.  
Uno smaltimento corretto di questo prodotto contribuirà a far risparmiare  
preziose risorse ed evitare potenziali effetti negativi sulla salute umana e  
sull’ambiente, che potrebbero derivare, altrimenti, da uno smaltimento  
inappropriato. Per ulteriori dettagli, contattare la propria autorità locale o il  
punto di raccolta designato più vicino.  
In caso di smaltimento errato di questo materiale di scarto, potrebbero  
venire applicate delle penali, in base alle leggi nazionali.  
Per gli utenti aziendali nell’Unione Europea  
Qualora si desideri smaltire apparecchiature elettriche ed elettroniche,  
contattare il rivenditore o il fornitore per ulteriori informazioni.  
Informazioni sullo smaltimento in nazioni al di fuori  
dell’Unione Europea  
Questo simbolo è valido solo nell’Unione Europea.  
Qualora si desideri smaltire questo prodotto, contattare le autorità locali o il  
rivenditore e chiedere informazioni sul metodo corretto di smaltimento.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Información sobre la eliminación para los usuarios de  
equipos eléctricos y electrónicos usados (particulares)  
La aparición de este símbolo en un producto y/o en la  
documentación adjunta indica que los productos eléctricos y  
electrónicos usados no deben mezclarse con la basura  
doméstica general.  
Para que estos productos se sometan a un proceso adecuado  
de tratamiento, recuperación y reciclaje, llévelos a los puntos de  
recogida designados, donde los admitirán sin coste alguno.  
En algunos países existe también la posibilidad de devolver los productos a  
su minorista local al comprar un producto nuevo equivalente.  
Si desecha el producto correctamente, estará contribuyendo a preservar  
valiosos recursos y a evitar cualquier posible efecto negativo en la salud de  
las personas y en el medio ambiente que pudiera producirse debido al  
tratamiento inadecuado de desechos.  
Póngase en contacto con su autoridad local para que le informen  
detalladamente sobre el punto de recogida designado más cercano.  
De acuerdo con la legislación nacional, podrían aplicarse multas por la  
eliminación incorrecta de estos desechos.  
Para empresas de la Unión Europea  
Si desea desechar equipos eléctricos y electrónicos, póngase en contacto  
con su distribuidor o proveedor para que le informe detalladamente.  
Información sobre la eliminación en otros países no  
pertenecientes a la Unión Europea  
Este símbolo sólo es válido en la Unión Europea.  
Si desea desechar este producto, póngase en contacto con las autoridades  
locales o con su distribuidor para que le informen sobre el método correcto  
de eliminación.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Informace pro uživatele k likvidaci elektrických a  
elektronických zařízení (domácnosti)  
Tento symbol na produktech anebo v průvodních dokumentech  
znamená, že použité elektrické a elektronické výrobky nesmí být  
přidány do běžného komunálního odpadu.  
Ke správné likvidaci, obnově a recyklaci doručte tyto výrobky na  
určená sběrná místa, kde budou přijata zdarma. Alternativně v  
některých zemích můžete vrátit své výrobky místnímu prodejci  
při koupi ekvivalentního nového produktu.  
Správnou likvidací tohoto produktu pomůžete zachovat cenné přírodní  
zdroje a napomáháte prevenci potenciálních negativních dopadů na životní  
prostředí a lidské zdraví, což by mohly být důsledky nesprávné likvidace  
odpadů. Další podrobnosti si vyžádejte od místního úřadu nebo nejbližšího  
sběrného místa.  
Při nesprávné likvidaci tohoto druhu odpadu mohou být v souladu s  
národními předpisy uděleny pokuty.  
Pro podnikové uživatele v zemích Evropské unie  
Chcete-li likvidovat elektrická a elektronická zařízení, vyžádejte si potřebné  
informace od svého prodejce nebo dodavatele.  
Informace k likvidaci v ostatních zemích mimo Evropskou  
unii  
Tento symbol je platný jen v Evropské unii.  
Chcete-li tento výrobek zlikvidovat, vyžádejte si potřebné informace o  
správném způsobu likvidace od místních úřadů nebo od svého prodejce.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Oplysninger til brugerne om afhændelse af elektriske  
apparater og elektronisk udstyr (private husholdninger)  
Når produkter og/eller medfølgende dokumenter indeholder dette  
symbol, betyder det, at elektriske apparater og elektronisk  
udstyr ikke må smides ud sammen med det almindelige  
husholdningsaffald.  
For at sikre en korrekt behandling, indsamling og genbrug, skal  
du aflevere disse produkter på dertil indrettede  
indsamlingssteder, hvor de vil blive modtaget uden ekstra  
omkostninger. I nogle lande er der også mulighed for, at du kan  
indlevere dine produkter hos den lokale forhandler, hvis du køber  
et nyt og tilsvarende produkt.  
Hvis du afhænder dette produkt på korrekt vis, vil det være med at spare på  
de værdifulde naturlige råstoffer og forhindre eventuelle negative  
påvirkninger på folkesundheden og miljøet, hvilket ellers kunne blive  
følgerne af en forkert håndtering af affaldet. Kontakt de lokale myndigheder  
for at få yderligere oplysninger om, hvor du kan finde det nærmeste  
indsamlingssted.  
I visse lande vil en forkert afhændelse af affaldet medføre en bødestraf i  
henhold til de gældende bestemmelser på området.  
Professionelle brugere i EU  
Hvis du ønsker at smide elektriske apparater eller elektronisk udstyr ud, skal  
du kontakte din forhandler eller leverandør for at få yderligere oplysninger.  
Oplysninger om afhændelse i lande uden for EU  
Dette symbol er kun gyldigt i EU.  
Hvis du ønsker at afhænde dette produkt, skal du rette henvendelse til de  
lokale myndigheder eller din forhandler. Her kan du få oplysninger om,  
hvordan du bedst kommer af med produktet.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Tietoja sähkö- ja elektroniikkalaitteiden hävittämisestä  
(kotitaloudet)  
Tämä symboli tuotteissa ja/tai niiden käyttöohjeissa osoittaa,  
että käytettyjä sähkö- ja elektroniikkalaitteita ei saa hävittää  
tavallisen kotitalousjätteen mukana.  
Jotta laitteet käsitellään asianmukaisesti, toimita ne  
kierrätyspisteisiin, jotka vastaanottavat tällaisia laitteita  
ilmaiseksi. Joissakin maissa kuluttajat voivat myös palauttaa  
käytetyt laitteet paikalliselle jälleenmyyjälle, jos he ostavat tilalle  
uuden vastaavanlaisen tuotteen.  
Tämän tuotteen asianmukainen hävittäminen säästää luonnonvaroja ja  
estää mahdollisesti muutoin syntyviä ympäristö- ja terveysongelmia.  
Lähistöllä sijaitsevista kierrätyspisteistä saa lisätietoja paikallisilta  
viranomaisilta.  
Jätelaissa ja rikoslaissa on säädetty rangaistus roskaamisesta ja  
lainvastaisesta hävittämisestä.  
Yrityskäyttäjät Euroopan unionissa  
Jos haluat hävittää sähkö- ja elektroniikkalaitteita, kysy lisätietoja  
jälleenmyyjältä tai tavarantoimittajalta.  
Tietoja jätteiden käsittelystä Euroopan unionin  
ulkopuolella  
Tämä symboli on käytössä vain Euroopan unionissa.  
Jos haluat hävittää tämän tuotteen, tiedustele oikeaa hävitystapaa  
paikallisilta viranomaisilta tai jälleenmyyjältä.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Πληροφορίες για την απόρριψη ηλεκτρικών και  
ηλεκτρονικών συσκευών (οικιακής χρήσης)  
Αυτή η σήµανση στα προϊόντα και/ή στα συνοδευτικά τους  
έντυπα υποδηλώνει ότι τα εν λόγω ηλεκτρικά και ηλεκτρονικά  
προϊόντα δεν πρέπει να απορριφθούν µαζί µε οικιακά απορρίµµ  
ατα.  
Προκειµένου να πραγµατοποιηθεί η κατάλληλη επεξεργασία και  
ανακύκλωση, αποσύρετε αυτά τα προϊόντα σε ανάλογα σηµεία  
περισυλλογής, όπου θα γίνουν δεκτά χωρίς χρέωσή σας.  
Εναλλακτικά, σε ορισµένες χώρες, µπορείτε να επιστρέψετε τα  
προϊόντα σε τοπικά καταστήµατα µε σκοπό την αγορά ανάλογου  
νέου προϊόντος.  
Η ορθή απόρριψη αυτού του προϊόντος βοηθάει στην εξοικονόµηση πολύτι  
µων φυσικών πόρων και στην αποφυγή τυχόν αρνητικών επιπτώσεων για  
την ανθρώπινη υγεία και το περιβάλλον, οι οποίες µπορεί να προκληθούν  
από λανθασµένη διαχείριση του εν λόγω απορρίµµατος.  
Επικοινωνήστε µε τις τοπικές αρχές για περισσότερες πληροφορίες  
σχετικά µε το πλησιέστερο ανάλογο σηµείο περισυλλογής.  
Ενδέχεται να επιβληθούν κυρώσεις για λανθασµένη απόρριψη του εν λόγω  
προϊόντος, σύµφωνα µε τη νοµοθεσία της χώρας σας.  
Προϊόντα επαγγελµατικής χρήσης, Ευρωπαϊκή Ένωση  
Αν επιθυµείτε να απορρίψετε ηλεκτρικό και ηλεκτρονικό εξοπλισµό,  
επικοινωνήστε µε τον πωλητή ή τον προµηθευτή για περισσότερες  
πληροφορίες.  
Πληροφορίες για την απόρριψη ηλεκτρικών και  
ηλεκτρονικών συσκευών σε χώρες εκτός της Ευρωπαϊκής  
Ένωσης  
Αυτή η σήµανση ισχύει µόνο στην Ευρωπαϊκή Ένωση.  
Αν επιθυµείτε να απορρίψετε αυτό το προϊόν, επικοινωνήστε µε τις τοπικές  
αρχές ή καταστήµατα πώλησης για να πληροφορηθείτε σχετικά µε την  
ορθή διαδικασία απόρριψης.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Informatie over het weggooien van elektrische en  
elektronische apparatuur (particulieren)  
Dit symbool betekent in Europa dat gebruikte elektrische en  
elektronische producten niet bij het normale huishoudelijke afval  
mogen.  
Lever deze producten in bij de aangewezen inzamelingspunten,  
waar ze gratis worden geaccepteerd en op de juiste manier  
worden verwerkt, teruggewonnen en hergebruikt. In Nederland  
kunt u uw producten bij uw winkelier inleveren bij de aanschaf  
van een vergelijkbaar nieuw product. Wanneer u dit product op  
de juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en  
voorkomt u potentiële negatieve gevolgen voor de volksgezondheid en het  
milieu, die anders kunnen ontstaan door een onjuiste verwerking van afval.  
Neem contact op met uw gemeente voor meer informatie over het  
dichtstbijzijnde inzamelingspunt of raadpleeg www.nvmp.nl,  
www.ictoffice.nl of www.stibat.nl.  
Voor zakelijke gebruikers in de Europese Unie  
Neem voor het weggooien van elektrische en elektronische apparatuur  
contact op met uw leverancier voor verdere informatie.  
Informatie over verwijdering van afval in landen buiten de  
Europese Unie  
Dit symbool is alleen geldig in de Europese Unie.  
Neem wanneer u dit product wilt weggooien, contact op met de lokale  
overheid of uw leverancier en vraag wat de juiste verwijderingsmethode is.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Informasjon for brukerne om kassering av elektrisk og  
elektronisk utstyr (private husholdninger)  
Når et produkt og/eller medfølgende dokumenter er merket med  
dette symbolet, betyr det at det elektriske eller elektroniske  
utstyret ikke bør kasseres sammen med vanlig  
husholdningsavfall.  
For at det kasserte utstyret skal bli behandlet, gjenvunnet og  
resirkulert på riktig måte, må du bringe det til nærmeste  
innsamlingspunkt eller gjenvinningsstasjon. I enkelte land kan  
du alternativt returnere produktene dine til den lokale  
forhandleren, eventuelt mot kjøp av et tilsvarende nytt produkt.  
Hvis du kasserer dette produktet på riktig måte, bidrar til du til å bevare  
verdifulle ressurser og til å motvirke de negative virkningene på miljøet og  
den menneskelige helse som kan forårsakes av feilaktig avfallsbehandling.  
Ta kontakt med de lokale myndigheter hvis du ønsker ytterligere  
informasjon om ditt nærmeste innsamlingspunkt.  
Feilaktig kassering av dette utstyret kan kanskje bøtelegges, avhengig av  
nasjonale lover og regler.  
For bedriftskunder i den Europeiske Union  
Hvis du ønsker å kassere elektrisk og elektronisk utstyr, må du kontakte  
forhandleren eller leverandøren din for å få mer informasjon.  
Informasjon om kassering i land utenfor den Europeiske  
Union  
Dette symbolet er kun gyldig i den Europeiske Union.  
Hvis du ønsker å kassere dette produktet, må du ta kontakt med  
forhandleren eller de lokale myndigheter og spørre dem om hvordan det  
skal kasseres på riktig måte.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Informacja dla użytkowników o pozbywaniu się urządzeń  
elektrycznych i elektronicznych (dotyczy gospodarstw  
domowych)  
Przedstawiony symbol umieszczony na produktach lub  
dołączonej do nich dokumentacji informuje, że niesprawnych  
urządzeń elektrycznych lub elektronicznych nie można  
wyrzucać razem z odpadami gospodarczymi.  
Prawidłowe postępowanie w razie konieczności pozbycia się  
urządzeń elektrycznych lub elektronicznych, utylizacji,  
powtórnego użycia lub odzysku podzespołów polega na  
przekazaniu urządzenia do wyspecjalizowanego punktu zbiórki.  
W niektórych krajach produkt można oddać lokalnemu dystrybutorowi  
podczas zakupu innego urządzenia.  
Prawidłowa utylizacja urządzenia umożliwia zachowanie cennych zasobów  
i uniknięcie negatywnego wpływu na zdrowie i środowisko, które może być  
zagrożone przez nieodpowiednie postępowanie z odpadami. Szczegółowe  
informacje o najbliższym punkcie zbiórki można uzyskać u władz lokalnych.  
Nieprawidłowa utylizacja odpadów zagrożona jest karami przewidzianymi w  
odpowiednich przepisach lokalnych.  
Użytkownicy w krajach Unii Europejskiej  
W razie konieczności pozbycia się urządzeń elektrycznych lub  
elektronicznych, prosimy skontaktować się z najbliższym punktem  
sprzedaży lub z dostawcą, którzy udzielą dodatkowych informacji.  
Pozbywanie się odpadów w krajach poza Unią Europejską  
Taki symbol jest ważny tylko w Unii Europejskiej.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Information om återvinning för användare av elektronisk  
utrustning (privatpersoner)  
Om denna symbol finns på produkterna och/eller medföljande  
dokumentation, betyder det att förbrukade elektriska och  
elektroniska produkter inte ska blandas med vanliga  
hushållssopor.  
För korrekt hantering, inhämtning och återvinning, ska dessa  
produkter lämnas på återvinningscentraler, där de tas emot utan  
kostnad. I vissa länder kan du som ett alternativ lämna in dina  
produkter hos återförsäljaren, när du köper en motsvarande, ny  
produkt.  
Om denna produkt återvinns på ett korrekt sätt sparas värdefulla resurser  
och eventuellt negativa effekter på den mänskliga hälsan och miljön  
förhindras, vilket kan bli fallet vid felaktig återvinning. Kontakta din lokala  
myndighet för mer information om var din närmsta återvinningsstation finns.  
Böter kan tillämpas vid felaktig kassering i enlighet med lagstiftningen i  
landet.  
För företagsanvändare inom den Europeiska  
gemenskapen  
Om ni vill kassera elektrisk eller elektronisk utrustning, vänligen kontakta er  
återförsäljare eller leverantör för mer information.  
Information om återvinning i länder utanför den  
Europeiska gemenskapen  
Denna symbol gäller bara inom den Europeiska gemenskapen.  
Om du vill kassera denna produkt ska du kontakta de lokala myndigheterna  
eller din återförsäljare, och fråga om korrekt förfarande.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Kullanılmayan Elektrikli ve Elektronik Aletlerin Elden  
Çıkarılmasına İlişkin Bilgi (bireysel kullanıcılar)  
Ürünlerde ve/veya ürünle birlikte gelen dokümanlarda yer alan  
bu simge, ömrü sona ermiş elektrikli ve elektronik ürünlerin  
genel ev çöpüne karıştırılmaması gerektiğini ifade eder.  
Uygun biçimde toplanmaları, işlenmeleri ve geri  
dönüştürülmeleri için lütfen bu tür ürünleri, bunlar için öngörülen  
ve ücretsiz olarak kabul edilen toplama noktalarına götürün.  
Ayrıca bazı ülkelerde eski ürününüzü, yeni eşdeğer bir ürün  
satın aldığınız yerel satıcınıza teslim edebilirsiniz.  
Ürünün doğru bir şekilde elden çıkarılması, değerli kaynakları korumaya  
yardımcı olacak ve yanlış biçimde atık gidermenin insan sağlığına ve  
çevreye verebileceği olası negatif etkileri önleyecektir. Çevrenizdeki en  
yakın toplama noktasına ilişkin daha ayrıntılı bilgi almak için lütfen yerel  
yetkililere başvurun.  
Ürünlerin uygun biçimde elden çıkarılmaması durumunda, ilgili ülkenin  
yasal düzenlemelerine bağlı olarak cezalar uygulanabilir.  
Avrupa Birliği dahilindeki kurumsal kullanıcılar için  
Elektrikli ve elektronik aletlerinizi elden çıkarmak istiyorsanız, ayrıntılı bilgi  
için lütfen satıcınıza veya tedarikçinize başvurun.  
Avrupa Birliği dışındaki ülkelerde atık gidermeye ilişkin  
bilgi  
Bu simge yalnızca Avrupa Birliği sınırları içerisinde geçerlidir.  
Bu ürünü elden çıkarmak istiyorsanız, lütfen yerel yetkililere veya satıcınıza  
başvurun ve uygun atık giderme yöntemi konusunda bilgi alın.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Camera Feature Locations  
Front View  
Indicator  
Antenna  
The indicator color  
shows camera status.  
Lens  
(0.3 m—Unlimited)  
FACTORY DEFAULT  
RESET Button  
*1  
Indicator Display  
Not on LAN  
On LAN  
Orange  
Orange blinking  
Orange blinking  
Power  
on  
Orange  
Green blinking  
Green  
Normal Operation*2  
Green  
Green blinking  
Green  
Setting  
Automatic  
Setup  
Finished setting  
Getting IP address*3  
Got IP address  
Orange blinking  
Green blinking  
Using  
DHCP  
Green  
Updating Firmware  
Orange blinking  
Orange blinking  
Turning off (about 5 seconds)  
FACTORY DEFAULT RESET  
button pressed  
The status when turned on  
(The camera is reset to factory default status after 1 minute.)  
Orange blinking (About a 2-second interval)  
Red blinking*4  
UPnPTM Failure  
Internal Failure  
1
* The information below varies depending on the indicator settings (see page 110).  
2
* The indicator turns orange if the camera is not connected to the LAN.  
3
* The indicator blinks orange if the camera is not connected to the LAN.  
4
* See page 4 of Troubleshooting on the CD-ROM.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
Rear View  
Serial number  
MAC Address  
(See Getting Started)  
Stand/Tripod  
Mounting Hole  
(See Getting  
Started)  
DC IN jack  
(See Getting Started)  
Switch  
(WIRED or  
WIRELESS)  
Ethernet  
(LAN) port  
(See Getting  
Started)  
Hook for AC  
adaptor cord  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
Table of Contents  
1
1.1  
Camera Monitoring......................................................24  
Accessing the Camera................................................................. 24  
Viewing the Single Camera page.................................................26  
1.2  
1.2.1 Displaying the Banner ............................................................................. 30  
1.2.2 Auto Centering the Image (Click to Center)............................................. 30  
1.2.3 Zooming In and Out................................................................................. 31  
1.2.4 Capturing a Still Image............................................................................ 32  
1.2.5 Using the Operation Bar.......................................................................... 33  
1.3  
Viewing the Multi-Camera page................................................... 34  
1.4  
Viewing the Buffered Image page................................................ 36  
1.4.1 Deleting Buffered Images........................................................................ 38  
1.5 Viewing Still Images on Your Mobile Phone................................. 39  
1.5.1 Enabling or Disabling the Buffer/Transfer on Your Mobile Phone ............ 41  
2
Using the Camera's Basic Features ..........................42  
Setup Page of the Camera........................................................... 42  
Connecting the Camera to Your Network..................................... 45  
Using Wireless LAN..................................................................... 50  
Using UPnP™ (Universal Plug and Play) ....................................53  
2.1  
2.2  
2.3  
2.4  
2.4.1 Connecting the Camera to a Router that Supports UPnP™ ................... 54  
2.4.2 Connecting the Camera to a Router that does not Support UPnP™ ...... 55  
2.5  
Registering with the DynamicDNS service .................................. 56  
2.5.1 DynamicDNS Service.............................................................................. 60  
2.6  
2.7  
Setting the Date and Time ........................................................... 62  
Changing Camera Settings.......................................................... 64  
3
Registering Users........................................................66  
3.1  
Changing the Authentication Setting and Administrator User  
Name and Password....................................................................66  
3.2  
3.3  
Logging in to the Camera............................................................. 70  
Creating, Modifying or Deleting General Users............................ 71  
4
4.1  
Buffering or Transferring Images...............................73  
Procedures of Buffering or Transferring Images .......................... 73  
Buffering or Transferring Images by Timer................................... 74  
4.2  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
4.3  
4.4  
4.5  
Buffering or Transferring Images by Motion Detection Signal...... 84  
Setting the Motion Detection........................................................ 97  
Setting Sensor Log Notification.................................................. 100  
5
Using Other Features................................................103  
5.1  
Changing Initial Settings on the Single Camera page or  
the Multi-Camera page .............................................................. 103  
5.2  
5.3  
5.4  
Configuring Multiple Cameras.................................................... 106  
Specifying Operation Time......................................................... 108  
Changing the Indicator Display.................................................. 110  
6
Camera Maintenance ................................................111  
6.1  
Maintenance page ..................................................................... 111  
6.1.1 Confirming the Status............................................................................ 112  
6.1.2 Confirming the Wireless Status ............................................................. 112  
6.1.3 Confirming Session Status .................................................................... 112  
6.1.4 Confirming Sensor Logs........................................................................ 113  
6.1.5 Restarting the Camera .......................................................................... 113  
6.1.6 Updating the Camera Firmware............................................................. 114  
6.1.7 Creating a Configuration File................................................................. 117  
6.1.8 Loading Settings from a Configuration File............................................ 118  
6.1.9 Resetting the Camera to Factory Default............................................... 119  
6.2  
Support page ............................................................................. 120  
6.2.1 The Help page ....................................................................................... 120  
6.2.2 The Wireless Help page ........................................................................ 121  
6.2.3 Product Information ............................................................................... 121  
6.2.4 Support Information............................................................................... 121  
6.3  
FACTORY DEFAULT RESET Button.......................................... 122  
7
7.1  
Other Information......................................................123  
Default Setting List..................................................................... 123  
Cleaning..................................................................................... 132  
7.2  
7.2.1 Cleaning the Main Unit .......................................................................... 132  
7.2.2 Cleaning the Lens.................................................................................. 132  
7.3  
7.4  
7.5  
Setting an IP Address on Your PC............................................. 133  
Using Setup Program................................................................. 134  
Setting Your PC.......................................................................... 141  
7.5.1 Setting Proxy Server Settings on a Web Browser ................................ 141  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
7.5.2 Setting UPnP™ to Display Camera Shortcut in My Network Places..... 144  
7.5.3 Setting the Internet Temporary File Setting on the Web Browser.......... 144  
7.6  
7.7  
7.8  
ASCII Character Table ............................................................... 145  
File Size and Number of Buffered Images ................................. 146  
Specifications............................................................................. 149  
Index..................................................................................151  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
1 Camera Monitoring  
1.1 Accessing the Camera  
1. Start up the web browser on your PC.  
2. Enter "http://IP Address (or URL):Port Number" on the address bar, and  
press [Enter] on the keyboard.  
When the port number is 80 (default), you do not need to include the port  
number in the address. See page 47 for details about the port number.  
If the camera image is not displayed, see page 9 and page 10 of  
Troubleshooting on the CD-ROM.  
E.g. http://192.168.0.253:50000  
http://  
.viewnetcam.com:50000  
3. The Enter Network Password window is displayed. Enter the user name and  
password that you set previously, and click [OK].  
Note  
When [Permit access from guest users] is set on the Security: Administrator  
page (see page 66), the authentication window will not be displayed.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Operating Instructions  
4. Click the following tabs to display each page.  
A
B
C
D
E
F
G
Select a language.  
Version Number  
A To Single Camera page (page 26)  
C To Buffered Image page (page 36)  
E To Maintenance page (page 111)  
G To log in to the camera (page 70)  
B To Multi-Camera page (page 34)  
D To Setup page (page 42)  
F To Support page (page 120)  
Note  
When users other than an administrator are accessing the camera, the [Setup]  
and [Maintenance] tabs are not displayed. Additionally, when [Do not permit  
access from guest users] or [Permit access from guest users (mobile only)] is  
set on the Security: Administrator page (see page 66), the [Login] tab will not  
be displayed.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
1.2 Viewing the Single Camera page  
1. Access the camera (see page 24).  
The Top page is displayed.  
2. Click the [Single] tab at the top of the page.  
When the Security Warning window is displayed, click [Yes] (see page 28).  
®
See page 29 for the Security Warning window when using Microsoft  
®
Windows XP Service Pack 2.  
Capture Image  
Button  
(See page 32)  
Operation Bar  
(See page 33)  
Features on the  
image  
Click to  
Center (See  
page 30)  
Digital Zoom  
(See page 31)  
The banner is  
displayed.  
(See page 30)  
3. Close the web browser.  
Note  
While viewing images under fluorescent lighting, the image may appear  
noisy or experience flicker if the incorrect AC power setting was selected.  
Select the frequency that is used in your area (see page 64).  
When the camera image is not displayed immediately or correctly, click  
[Refresh] at the tool bar on the web browser. The image will be refreshed.  
The digital zoom can be operated only when displaying video (Motion  
JPEG).  
The refresh interval is set to [Motion] by default. The setting can be  
changed on the operation bar (see page 33).  
The refresh interval may change depending on the network condition, PC  
performance, what object you view and the number of simultaneous users.  
When displaying video (Motion JPEG), the camera allows up to 20  
simultaneous accesses. The 21st user will see a gray screen. Access to  
play buffered images is also included in the maximum number.  
To reduce the data traffic, set up [Limit Continuous Motion JPEG] on the  
Image Display page (see page 103). The video (Motion JPEG) can be  
automatically changed to refreshing still images. Images of moving  
subject are blurred or not displayed.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
When the camera transmits a dark scene, the camera image may become  
white, or horizontal lines may be displayed on the screen. This is one of the  
characteristics of a CMOS sensor. This is not a malfunction.  
To display the Single Camera page directly, add it to the [Favorites] on the  
web browser.  
To view dark images, select [Enable] (default) at Color Night View on the  
Camera Setup page. The image will be brighter, but the refresh interval may  
increase and image quality may decrease in a dark place. (See page 64)  
The video (Motion JPEG) may stop since the wireless communication may  
be disconnected depending on the environment. Click [Refresh] on the  
web browser when the communication is disconnected.  
®
If ActiveX Controls (see page 28 or page 29) cannot be installed,  
download them from the Panasonic Network Camera support website at  
Error messages and screen color  
When general or guest users access the Single Camera page outside the  
Operation Time, or when over 20 (the maximum number) users access the page  
simultaneously, a gray screen and error messages will be displayed on the page.  
An error message  
is displayed.  
Error Message  
Cause and Remedy  
The operation time When general or guest users access the Single Camera  
has ended.  
page outside the Operation Time, a gray screen will be  
displayed. Clicking [Refresh] on the web browser displays  
an error message. Consult your administrator about the  
Operation Time.  
The maximum  
When [Motion] is selected for the Refresh Interval, up to 20  
numberofaccesses users can access the camera simultaneously. For the 21st  
has been  
exceeded.  
user, a gray screen and an error message will be displayed  
on the Single Camera and Buffered Image pages. Wait for  
a moment, and click [Refresh] on the web browser, or  
change the value for the Refresh Interval.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Security Warning window  
When trying to view a video (Motion JPEG) for the first time, a Security Warning for  
ActiveX Controls will be displayed. When using Windows 2000 or Windows XP, log  
in as an administrator to install ActiveX Controls and enable video (Motion JPEG)  
viewing.  
If you cannot install ActiveX Controls or you cannot see the video  
(Motion JPEG) using Internet Explorer  
In Internet Explorer, click [Tools][Internet Options][Security] tab and click  
[Custom level].  
(1) Check "Prompt" in "Download signed ActiveX Controls".  
(2) Check "Enable" in "Run ActiveX Controls and plug-ins".  
ActiveX Controls can be installed from the CD-ROM.  
(1) Restart the PC.  
(2) Confirm that Internet Explorer is closed.  
(3) Double-click "ocx\ActiveXInst.exe" on the CD-ROM.  
Note  
When the IP address was changed for the camera, enter it on the address bar.  
Video (Motion JPEG) may not be displayed. Wait for a moment.  
If you use a proxy server, set the web browser not to access the proxy server  
(see page 141).  
In some corporate network environments, a firewall may be used for security  
purposes. This may prevent motion video (Motion JPEG) from being  
displayed. In this situation we recommend:  
Contacting your network administrator.  
Using regularly refreshed images rather than video (Motion JPEG).  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Security Warning window on Microsoft Windows XP Service Pack 2  
To view a video (Motion JPEG), ActiveX Controls must be installed.  
Follow the steps shown below to install ActiveX Controls.  
1. Click the warning displayed above the tabs, and click [Install ActiveX  
Control...].  
2. Click [Install].  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
1.2.1 Displaying the Banner  
An image and its linked website can be specified for a banner. To display the  
banner, the Banner Display settings need to be set on the Image Display page (see  
page 103). Clicking the banner displays the website of the set URL Link. The  
Banner Display is not enabled as the default.  
1.2.2 Auto Centering the Image (Click to Center)  
Using your mouse, click any portion of the camera image when using the digital  
zoom. The image will automatically move to place the selected point in the center  
of the screen.  
1. Move the cursor to the desired point.  
Cursor  
2. Click it.  
The clicked point is centered.  
Note  
A clicked position may deviate from the center depending on the position.  
Images can only be moved within the page when magnification is ×1.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Operating Instructions  
1.2.3 Zooming In and Out  
This camera has 10× digital zoom feature that uses ActiveX Controls. The digital  
zoom feature can be used while playing video (Motion JPEG) on the Single  
Camera, Multi-Camera and Buffered Image pages. The digital zoom feature can be  
operated by rotating the mouse wheel or clicking the right mouse button.  
Note  
The Click to Center feature is available while zooming in or out. Images  
can only be moved within the page when magnification is ×1.  
As the magnification increases, the image quality decreases.  
This feature is not available when viewing on a mobile phone.  
When camera images are buffered and transferred, the camera images  
are not zoomed in and out.  
Clicking the right mouse button  
Moving the mouse up or down while pressing the right mouse button zooms in and  
out.  
Zoom in  
Zoom out  
Rotating the mouse wheel  
On a screen, rotating the mouse wheel away from  
Zoom in  
Zoom out  
you zooms in, and rotating it towards you zooms  
out.  
Note  
The performance of the mouse varies  
according to your OS.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
1.2.4 Capturing a Still Image  
Still images can be saved on your PC.  
1. Select an image resolution to display an image.  
2. Click the Capture image button.  
Capture Image Button  
The camera image opens in another window.  
3. Right-click the image, and select [Save Picture As...].  
The Save as dialog box is displayed.  
4. Specify a folder, enter the file name and click [Save].  
The camera image is saved in the folder.  
5. Click [Close].  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
1.2.5 Using the Operation Bar  
Brightness: Adjusts image brightness in nine steps including  
[STD] (Standard). Clicking [-] or [+] darkens or  
brightens the image respectively.  
Refresh  
Interval:  
Sets a refresh interval. (Motion—60-second  
interval)  
Resolution: Selects [640 × 480] or [320 × 240] (default) pixels.  
Image  
Selects the image quality.  
Quality:  
[Favor Clarity] optimizes the image for good  
clarity (The motion may be slow down).  
[Standard] keeps the standard quality. (default)  
[Favor Motion] optimizes the image for motion  
display (The image quality may decrease).  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
1.3 Viewing the Multi-Camera page  
To view multiple cameras on the Multi-Camera page, you need to configure each  
camera on the Multi-Camera Setup page (see page 106).  
1. Access the camera (see page 24).  
The Top page is displayed.  
2. Click the [Multi] tab at the top of the page.  
The Multi-Camera page can display up to 12 camera images.  
Capture Image Button (See page 32)  
Switches displayed  
cameras. If you select  
[All] at the View Type,  
video (Motion JPEG)  
cannot be displayed.  
Selects [320 × 240]  
(default) or [160 ×  
120] pixels resolution.  
Selects the refresh  
interval (Motion—60-  
second interval).  
Clicking the camera  
name displays the  
Single Camera page  
in another window.  
The Selfcamera is registered at No. 1. (default)  
3. Close the web browser.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Note  
The digital zoom feature and the Click to Center feature can be used for  
video (Motion JPEG) only.  
When selecting [All] for the View Type, all images are displayed in 160 ×  
120 pixels resolution.  
640 × 480-pixel images cannot be displayed on the Multi-Camera page.  
When viewing video (Motion JPEG), we recommend using an Ethernet  
switching hub instead of a repeater hub to prevent degradation in video  
display.  
Due to network congestion or the number of accesses, the refresh interval  
may increase.  
If the refresh interval is too long, restrict the bandwidth on the Network  
page (see page 48). The refresh interval should improve.  
To reduce the data traffic, set up [Limit Continuous Motion JPEG] on the  
Image Display page (see page 103). The video (Motion JPEG) can be  
automatically changed to refreshing still images. Images of moving  
subject are blurred or not displayed.  
When viewing 4 cameras on the Multi-Camera page, you may need 3 to 4  
Mbps bandwidth. If sufficient bandwidth is not available, the refresh  
interval may increase.  
The Click to Center feature can be used while using the digital zoom.  
When an image is not displayed on the Multi-Camera page  
Confirm that the global IP address is specified correctly for each camera and  
that each camera is connected to the Internet. For Internet access, local IP  
addresses (192.168.  
.
) cannot be used. (See page 11 of  
Troubleshooting on the CD-ROM)  
Confirm the settings on the Multi-Camera Setup page (see page 106).  
Confirm that the web browser is not accessing a proxy server (see page 141).  
When setting [Do not permit access from guest users] or [Permit  
access from guest users (mobile only)] on the Security:  
Administrator page  
An authentication window is displayed when accessing the camera. Enter the  
administrator's or the general user's user name and password.  
When you view images from several cameras on the Multi-Camera page, an  
authentication window is displayed for each camera that has security settings  
enabled. Enter the administrator's or general user's user name and password  
registered for each camera.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
1.4 Viewing the Buffered Image page  
To buffer images in the camera's internal memory, you need to set up the image  
transfer settings (see page 74 or page 84). Buffered images can be viewed on this  
Buffered Image page.  
1. Access the camera (see page 24).  
The Top page is displayed.  
2. Click the [Buffered Image] tab at the top of the page.  
3. Click the trigger number.  
The trigger number is displayed (see page 74 or page 84).  
The trigger is displayed  
(see page 74 or page 84).  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
4. Display images by clicking buttons below.  
The date and time when the images  
were buffered are displayed.  
Month (Sep), day (20), hour (02),  
minute (58), second (15),  
millisecond (120), AM/PM (PM), the  
number and the total number of  
frames (1/10) are displayed.  
[Play]:  
The buffered images are displayed in sequence.  
[<Prev] or [Next>]:  
The previous or next image is displayed.  
[<100], [<10] or [10>], [100>]:  
The 10th or 100th image before or after the current image appears.  
Note  
The buffered images are displayed chronologically.  
Still images (not being played) from the Buffered Image page can be saved.  
Put the cursor on the image, and right-click it. Then select [Save Picture As...].  
The maximum number of buffered images changes depending on resolution,  
image quality and the specific images the camera is buffering. At 320 × 240  
pixels resolution and standard quality, the camera can buffer about 250  
frames.  
If 3 triggers are enabled [maximum 5 triggers], the internal memory capacity  
is divided into 3 sections. In this case, each trigger can buffer about 80 frames.  
See page 146 for more details regarding the internal memory capacity.  
The digital zoom can be used while viewing buffered images (while playing  
video [Motion JPEG]).  
The Click to Center feature can be used while using the digital zoom.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
1.4.1 Deleting Buffered Images  
If you intend to delete images for each transfer method, click [Delete Buffered  
Images] on the Trigger page (see page 74 or page 84).  
Note  
If you are buffering images to the internal memory, the following operations  
also delete all buffered images.  
Turning off the camera.  
Saving the Date and Time page.  
Restarting, updating firmware or resetting the camera to factory default.  
Changing the Enable/Disable settings on the Image Buffer/Transfer page  
(see page 41, page 74 or page 84).  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
1.5 Viewing Still Images on Your Mobile Phone  
Still images can be viewed over the Internet from a compatible mobile phone.  
Enter "http://IP address (or URL):Port Number/mobile" on a mobile phone and  
press [OK].  
When the port number is set to 80 (default), it is not required.  
E.g.  
http://  
(or  
.
.
.
:50000/mobile  
.viewnetcam.com:50000/mobile)  
Allow access from the Internet to access the camera from mobile phones.  
When an authentication window is displayed, enter the administrator's or  
general user's user name and password.  
A still image is displayed. (Video [Motion JPEG] cannot be displayed.)  
Pressing 5 will refresh the image.  
160 × 120 resolution is displayed on the first access.  
Pressing 0 switches the resolution to 320 × 240.  
Displays up to 50 Logs in order of time (only for an  
administrator).  
An administrator can  
enable or disable the  
Image Buffer/Transfer  
setting from your mobile  
phone (see page 41).  
Goes to the control page.  
Displays the number of  
new logs.  
MD: Motion Detection  
Displays the date and  
time.  
Goes to the control page.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Note  
If the image is not displayed properly, try the following 2 URLs.  
1. http:// IP address(or URL):Port Number/MobileH for HTML.  
(or .viewnetcam.com:50000/MobileH)  
2. http:// IP address(or URL):Port Number/MobileX for XHTML.  
(or .viewnetcam.com:50000/MobileX)  
Some mobile phones are not compatible with Panasonic Network Cameras.  
Some phones may allow viewing only on port 80, and some may not support  
password authentication. See the Panasonic Network Camera support  
website below for a list of mobile phones, and their level of compatibility with  
the Panasonic Network Camera.  
Some mobile phones display images at a decreased size.  
If [Permit access from guest users] or [Permit access from guest users (mobile  
only)] is selected, users can access mobile phone-specific screens via a  
mobile phone or PC without the need for authentication.  
Only administrators can operate the Sensor log and Buffer/Transfer.  
Panasonic Network Camera support website:  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
1.5.1 Enabling or Disabling the Buffer/Transfer on Your  
Mobile Phone  
1. Access camera images from your mobile phone, and log in as an administrator  
(see page 39).  
2. Select [Buffer/Transfer].  
3. Select a trigger number that you want to enable or disable.  
Example: Enabling the Buffer/Transfer setting (No.1).  
Selecting [Control Page] changes to the previous page.  
4. Select [Save].  
Selecting [Save] enables or disables the buffer/transfer settings, and all  
buffered images will be deleted.  
Selecting [Cancel] takes you back to the previous page without saving  
changes.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
2 Using the Camera's Basic Features  
2.1 Setup Page of the Camera  
1. Access the camera (see page 24).  
The Top page is displayed.  
Note  
When [Permit access from guest users] is set on the Security:  
Administrator page, click the [Login] tab (see page 70) and log in as an  
administrator.  
When users other than an administrator are accessing the camera, the  
[Setup] and [Maintenance] tabs are not displayed.  
2. Click the [Setup] tab at the top of the page.  
(1)  
(2)  
(3)  
(4)  
(5)  
(6)  
(7)  
(8)  
(9)  
(10)  
(11)  
(12)  
(13)  
(14)  
(15)  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Operating Instructions  
Basic  
(1)  
Network  
Configures network settings to connect the camera to the  
network (see page 45).  
(2)  
(3)  
Wireless  
UPnP  
Configure a wireless network (see page 50).  
Enables automatic port forwarding and creates a shortcut  
to the camera (see page 53).  
(4)  
(5)  
DynamicDNS  
Registers with the DynamicDNS service (see page 56).  
Date and Time Sets the date and time, automatic time adjustment and  
summer (daylight saving) time settings (see page 62).  
(6)  
Camera  
Sets camera name, white balance, AC power source  
frequency and color night view (see page 64).  
Account  
*1  
(7)  
Administrator Sets authentication and administrator security (user name  
and password) (see page 66).  
*1  
(8)  
General User  
Sets general user security (user name and password) and  
access levels (see page 71).  
Buffer/Transfer  
(9) Trigger  
Sets image buffer or transfer by timer or motion detection  
(see page 74 or page 84).  
(10) Motion  
Detection  
Sets the threshold and sensitivity for motion detection (see  
page 97).  
(11) Sensor Log  
Sets the information required to send log notifications by e-  
mail (see page 100).  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Advanced  
(12) Image Display Sets the resolution, image quality and refresh interval of the  
Single Camera and Multi-Camera page, Limit Continuous  
*1  
Motion JPEG setting , language and banner display (see  
page 103).  
*1  
(13) Multi-Camera  
Sets the camera IP address or host name, and camera  
name on the Multi-Camera page (maximum 12 cameras)  
(see page 106).  
(14) Operation  
Time  
Sets the time period to display camera images (see page  
108).  
(15) Indicator  
Control  
Sets the indicator display (see page 110).  
*1  
If you change the [Administrator], [General User], [Multi-Camera] page settings or Limit  
Continuous Motion JPEG setting, changes will not be applied to video (Motion JPEG)  
viewers. Restart the camera to apply changes to all video viewers.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
2.2 Connecting the Camera to Your Network  
The Network page offers three options to configure the camera.  
[Automatic Setup] automatically assigns an unused IP address to the camera,  
and uses UPnP (Universal Plug and Play) to configure your router.  
TM  
[Static] allows the user to use a specific IP address.  
[DHCP] is offered for ISPs that require this option.  
1. Click [Network] on the Setup page.  
2. Click a connection mode.  
Most common mode of setup.  
Uses a static IP address.  
Uses ISP DHCP server function.  
See below for details of each connection mode.  
3. Enter each parameter in the relevant data field.  
Automatic Setup  
The camera automatically obtains the network settings (subnet mask, default  
gateway and DNS server address) using the router's DHCP feature. The  
camera also automatically searches for an unused IP address on your  
network. If you select [Yes] for Allow Access from the Internet, the camera  
TM  
automatically enables port forwarding using UPnP . In this case, the camera  
automatically searches for an unused port number on your network in the  
order of 80, then from 50000 to 50050.  
Clicking [Cancel] takes you back to the previous page without saving  
changes.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
DHCP Setup  
Static Setup  
Clicking [Cancel] takes you back to the previous page without  
saving changes.  
4. Click [Save] when finished.  
The new settings are saved.  
When finished, the following page is displayed.  
Note  
The current network settings are shown on the Status page in the Maintenance  
section (see page 112).  
5. Click [Restart].  
The camera restarts, and the Top page is displayed.  
When the camera is restarted, all buffered images in the internal memory  
are deleted.  
Checking [Yes] for [Allow Access from the Internet] on [Automatic Setup]  
may not display the Top page, since the port number may change. Use the  
Setup Program to access the camera.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Note  
If you do not know the camera IP address when setting [Automatic Setup] or  
[DHCP Setup], it can be searched for by using the Setup Program (see page  
134).  
Setting  
Description  
Allow Access from  
the Internet  
(Automatic Setup  
The Allow Access from the Internet setting automatically  
configures the router's Port Forwarding setting (some  
routers call it "Address Translation", "Static IP  
Masquerade", "Virtual Server" or "Port Mapping"). To  
enable Internet access to the camera, check [Yes]. In this  
case, the camera automatically searches for an unused  
port number on your network in the order of 80, then from  
50000 to 50050. To disable Internet access to the camera,  
check [No].  
Only)  
Network  
To prohibit the Setup Program from changing the network  
settings, uncheck the box.  
Configuration from  
Setup Program  
(Static/DHCP Only)  
Port Number  
(Static/DHCP Only)  
The default port number is 80. When you use multiple  
cameras with a router on your network, each camera must  
be assigned its own port number (see page 55 "2.4.2  
UPnP™").  
Do not set the following port numbers.  
FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53,  
POP3: 110, HTTPS: 443, ICQ: 4000 and IRC: 6661—  
6667.  
Enter a number between 1—65535.  
Some ISPs do not allow you to use port 80. Ask your ISP  
or network administrator about which port numbers are  
accessible over the Internet.  
IP address  
Subnet Mask  
If your ISP or network administrator specifies an IP  
address and subnet mask, enter them in each data field.  
If you use the camera on a LAN, set an IP address with the  
same class as your PC (see page 133).  
Set 4 numbers (0—255) and 3 periods, such as  
"192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available.  
(Static Only)  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Setting  
Description  
Host Name  
(DHCP Only)  
If your ISP uses the DHCP function, which automatically  
assigns an IP address to the camera, enter the ISP-  
assigned host name. (The host name may be used as an  
authentication.)  
Enter ASCII characters for the host name (see page 145).  
Note that [Space], ["], ['], [&], [<] and [>] are not available.  
*1  
Default Gateway  
If you have been assigned a Default Gateway address by  
your ISP or network administrator, enter it in this data field.  
Set 4 numbers (0—255) and 3 periods, such as  
"192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available.  
(Static/DHCP Only)  
DNS Server  
Address  
The DNS server address is required in the following  
situations:  
*1  
(Static/DHCP Only)  
Transferring camera images by E-mail or FTP  
Setting cameras by their host names on the Multi-  
Camera Setup page  
Using the DynamicDNS service  
Using the sensor log notification  
If you have been assigned a DNS server addresses by  
your ISP or network administrator, enter them in this data  
field. There are usually two addresses.  
Set 4 numbers (0—255) and 3 periods, such as  
"192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available.  
Max. Bandwidth  
Usage  
The bandwidth can be restricted.  
Select a maximum bandwidth from [Unlimited] to [0.1  
Mbps].  
Note  
Set a maximum bandwidth referring to the following file  
sizes. These are examples for a JPEG file of standard  
image quality. File sizes may change depending on the  
image quality or the brightness of the object.  
160 × 120 pixels: About 3 KB (24 Kbit)  
320 × 240 pixels: About 10 KB (80 Kbit)  
640 × 480 pixels: About 18 KB (144 Kbit)  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
Setting  
Description  
Connection Type  
Select [Auto Negotiation] normally. For wireless  
connection, [Auto Negotiation] must be selected. If the  
camera cannot be accessed, see page 9 of  
Troubleshooting on the CD-ROM.  
*1  
If the IP address is automatically obtained from a DHCP server, this field does not need to be  
set.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
2.3 Using Wireless LAN  
Wireless communication is possible by adjusting the settings of the wireless LAN  
to those of the wireless router. Take a note of the settings and save them for  
reference. For more information about wireless settings, please refer to  
1. Click [Wireless] on the Setup page.  
2. Set each parameter for Wireless Configuration.  
Setting  
SSID  
Description  
The SSID must be set to match the SSID your wireless  
router or wireless LAN uses. The SSID is limited to 32  
characters (alpha numeric) and is case sensitive.  
Communication  
mode  
802.11b: There are a lot of 802.11b-compliant products  
and they are inexpensive. They are widely prevalent, so it  
is likely that 802.11b will match your existing wireless  
devices.  
802.11b/g (default): This mode supports both the 802.11b  
and 802.11g wireless LAN standards. It is the  
communication mode that is easiest to install on your  
existing wireless LAN.  
802.11g exclusive: This mode communicates using  
802.11g only. It does not support the mixed standard mode  
of 802.11b/g, so it allows the use of original features of  
*1  
802.11g.  
*1  
Even if "802.11g exclusive" is in use, the existence of other wireless devices using a 2.4  
GHz bandwidth —including 802.11b wireless devices— may make the baud rate on the  
802.11g slower.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Operating Instructions  
3. Set each parameter for Encryption.  
Setting  
Description  
Select to encrypt or not encrypt.  
To prevent unauthorized users from reading data, selecting  
[WEP] is recommended.  
Cipher  
WEPKey  
Selection  
The checked WEPKey is used as the standard WEPKey.  
Check the same WEPKey as the one selected for the  
router.  
WEPKey1—4  
Select one from [HEX, 10 characters 64 bit], [HEX, 26  
characters 128 bit], [HEX, 32 characters 152 bit], [ASCII 5  
characters 64 bit], [ASCII 13 characters 128 bit] or [ASCII  
16 characters 152 bit].  
Selecting [WEP] at Cipher enables you to set WEPKey1—  
4. One or all of the four keys can be set. Check the same  
key number as set to the wireless router, and set the same  
encryption as at the wireless router.  
<Example>  
HEX, 10 characters 64 bit  
: 012345abcd  
HEX, 26 characters 128 bit  
: 0123456789abcdef012  
345abcd  
HEX, 32 characters 152 bit  
: 0123456789abcdef012  
3456789abcdef  
ASCII 5 characters 64 bit  
ASCII 13 characters 128 bit  
ASCII 16 characters 152 bit  
: 012yz  
: 0123456uvwxyz  
: 0123456789uvwxyz  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Note  
Some wireless devices do not support the WEP 152 bit encryption.  
The camera supports only open system authentication. If the wireless  
router or access point is set to shared key authentication, set it to auto or  
open system.  
4. Click [Save] when finished.  
The new settings are saved.  
When finished, "Success!" is displayed.  
5. Click [Go to Wireless configuration page].  
The Wireless page is displayed.  
6. Set the switch to WIRELESS.  
Note  
Encryption helps protect data within wireless LAN from third parties.  
Enter both the MAC addresses for the camera itself and the camera's  
wireless module to enable the MAC address filtering feature on the  
wireless router. The wireless module MAC address is one value higher  
than the camera MAC address.  
It takes about 1 minute for the new settings to become effective.  
It is not possible to access the camera simultaneously by both wired and  
wireless connection.  
To communicate using wireless connection, set up the camera using wired  
connection and flip the switch from WIRED to WIRELESS as shown  
below.  
Even if the camera is set to wired connection, it emits electrical waves for  
about 5 minutes after the power has been on. During this time, the router's  
wireless indicator is on or blinking. Electrical waves will stop being  
transmitted after about 5 minutes.  
< Side >  
Switch  
When you switch from WIRED to WIRELESS or vice versa, restart the  
camera. Some routers may also need to be restarted after switching.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
2.4 Using UPnP™ (Universal Plug and Play)  
TM  
UPnP can automatically configure your router to make it accessible from the  
TM  
Internet. In order to use this feature, your router needs to support UPnP , and it  
TM  
must be enabled. UPnP is disabled on most routers by default. See http://  
panasonic.co.jp/pcc/products/en/netwkcam/ and your router's manual for  
TM  
TM  
details of how to enable UPnP . After UPnP is enabled on the router, set [Enable]  
for auto port forwarding.  
1. Click [UPnP] on the Setup page.  
2. Set up UPnP.  
Setting  
Auto Port  
Description  
If the network setting is [Static] or [DHCP], enabling auto  
port forwarding allows you to access the camera from the  
Internet.  
Forwarding  
Note  
If the network setting is [Automatic Setup], also enable  
[Allow Access from the Internet] on the Network page (see  
page 47).  
DisplayShortcut •  
Icon in My  
Enabling this creates a shortcut to the camera in the My  
Network Places folder.  
Network Places  
Note  
To enable this feature when using Windows XP or  
TM  
Windows Me, enable the UPnP Windows component  
beforehand (see page 144).  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
3. Click [Save] when finished.  
The new settings are saved.  
When finished, "Success!" is displayed.  
4. Click [Go to UPnP page].  
The UPnP page is displayed.  
2.4.1 Connecting the Camera to a Router that Supports  
UPnP™  
TM  
To allow access from the Internet with a router supporting UPnP , follow the  
procedures shown in Getting Started.  
Note  
TM  
On some routers, the UPnP feature is disabled by default. Enable your  
TM  
router's UPnP feature following the router manual before you set up the  
camera. See the Panasonic Network Camera support website at http://  
If a maximum idle time is set in PPPoE or PPTP connection with your ISP,  
disable it on the router. See the router manual for details.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
2.4.2 Connecting the Camera to a Router that does not  
Support UPnP™  
TM  
To allow access from the Internet with a router that does not support UPnP , follow  
the procedures below.  
1. Select [Static] on the Network page.  
(1) Access the camera (see page 24).  
(2) Click the [Setup] tab at the top of the page.  
(3) Select [Static] on the Network page.  
The Static IP Address Configuration page is displayed. Make a  
note of the IP address and port number, since they are required to  
enable port forwarding on the router.  
Note  
You must assign a unique IP address and a unique port number to  
each camera in the LAN.  
(4) Click [Save] without changing the settings.  
(5) Click [Restart].  
*1  
2. Enable port forwarding on the router.  
Using the IP address and port number noted on step 1-(3), enable port forwarding on  
the router. See the router manual for how to enable port forwarding.  
3. Register with the DynamicDNS service.  
*1  
Port Forwarding feature  
The port forwarding feature is required to allow camera access from the Internet with a  
TM  
router that does not support UPnP . It exchanges a local IP address for a global one.  
Global IP address or URL  
Port No.  
Port Forwarding feature  
vvv.xxx.yyy.zzz:80  
vvv.xxx.yyy.zzz:81  
192.168.0.253:80  
192.168.0.252:81  
vvv.xxx.yyy.zzz:80  
vvv.xxx.yyy.zzz:81  
Internet  
192.168.0.254  
Router  
192.168.0.1  
192.168.0.252  
Port No. 81  
192.168.0.253  
Port No. 80  
Note  
The IP addresses shown above may differ from those offered on your home network.  
*1  
"Port forwarding" may be called "Address translation", "Static IP Masquerade", "Virtual server"  
or "Port mapping" in other products.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
2.5 Registering with the DynamicDNS service  
DynamicDNS is a service that allows you to assign an easy-to-remember name to  
the camera, for example, similar to your favorite website. It also allows you to easily  
access the camera, even when your ISP changes the IP address. Panasonic  
Communications recommends that you register with a DynamicDNS to access the  
camera from the Internet. See http://www.viewnetcam.com for details about the  
Viewnetcam.com service.  
1. Click [DynamicDNS] on the Setup page.  
When you select [Disable] or [Viewnetcam.com] (see page 56)  
When you select [User-specified DynamicDNS] (see page 58)  
When you select [Disable]  
2. Click [Save].  
The DynamicDNS service is disabled.  
Clicking [Cancel] cancels your settings without saving changes.  
When you select [Viewnetcam.com]  
2. Click [Next].  
Clicking [Cancel] cancels your settings without saving changes.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Operating Instructions  
3. Click [Save].  
Clicking [Cancel] cancels your settings without saving changes, and the  
DynamicDNS window is displayed.  
Setting  
Description  
Personal  
(Camera) URL  
The camera's personal URL will be displayed after you  
register with the Viewnetcam.com service.  
Your Account  
Link  
The URL required to register with the Viewnetcam.com  
service is displayed. Clicking [Your Account Link] item  
name displays the Viewnetcam.com registration website.  
4. Click [OK].  
When finished, "Success!" is displayed.  
The new settings are saved.  
5. Click [Go to Viewnetcam.com page].  
The Viewnetcam.com page is displayed.  
6. Click Your Account Link.  
The Viewnetcam.com registration website is displayed.  
Note  
When the Viewnetcam.com registration website is not displayed, confirm  
that the URL is displayed in the right column next to Your Account Link. If  
the URL is not displayed, follow the procedures below.  
1. Wait for a moment, then click [Refresh] on the web browser.  
2. Confirm that your network (your PC and camera) is connected to  
the Internet.  
Personal (Camera) URL is available after registering with the  
Viewnetcam.com service.  
If port forwarding is not enabled or your network is not connected to the  
Internet, the Viewnetcam.com service is not available.  
7. Register with the Viewnetcam.com service following the instructions on the  
website.  
The Viewnetcam.com page is displayed.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
8. Access your camera with the registered URL from the Internet (see page 24).  
When the Top page is displayed, Viewnetcam.com registration is  
complete.  
Note  
It may take a maximum of 30 minutes for the registered URL to work.  
If "Expired" is displayed for the Personal (Camera) URL on the  
Viewnetcam.com page or for the Camera URL at Viewnetcam.com on the  
Status page, restart the camera. After that, confirm that your registered  
URL is displayed on the pages.  
Confirming Internet access  
Due to the router's specifications, the image may not be displayed even if you  
access the camera from your PC on the same LAN as the camera. In this case,  
try:  
Accessing from a PC on another network (see page 24)  
Accessing from your mobile phone (see page 39)  
When you select [User-specified DynamicDNS]  
2. Click [Next].  
Clicking [Cancel] cancels your settings without saving changes.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
3. Set each parameter.  
Clicking [Cancel] cancels your settings without saving changes.  
DynamicDNS information can be obtained from companies in the  
DynamicDNS service industry.  
Setting  
Description  
DynamicDNS  
Server URL  
Input URL acquired from the DynamicDNS service industry  
company. Enter 1—255 characters. The URL must be started  
with "http://".  
*1  
Updating time  
Specify the updating time.  
*2  
User Name  
Input User Name acquired from the DynamicDNS service  
industry company. Enter up to 63 characters.  
*2  
Password  
Input Password acquired from the DynamicDNS service  
industry company. Enter up to 63 characters.  
*1  
*2  
Note that [Space] and ["] are not available.  
Note that ["] and [:] are not available.  
4. Click [Save] after finished.  
The new settings are saved.  
When finished, "Success!" is displayed.  
5. Click [Go to DynamicDNS page].  
The DynamicDNS page is displayed.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Note  
It may take several minutes for the registered URL to connect.  
Some DynamicDNS services may not connect.  
Confirming Internet access  
Due to the router's specifications, the image may not be displayed even if you  
access the camera from your PC on the same LAN as the camera. In this case,  
try:  
Accessing from a PC on another network (see page 24)  
Accessing from your mobile phone (see page 39)  
2.5.1 DynamicDNS Service  
DynamicDNS allows you to choose an easy-to-remember address (such as  
"bob.viewnetcam.com") that can be used to view images from your camera over  
the Internet.  
What are the advantages of DynamicDNS service?  
In order to view camera images over the Internet, you need to know your camera's  
global IP address. However, many Internet Service Providers (ISPs) assign their  
customers a "dynamic" IP address that changes monthly, weekly, or each time they  
log on. Unless you have been assigned a static IP address (an IP address that  
does not change periodically) by your ISP, you may find it difficult to access your  
camera over the Internet. The Viewnetcam.com service allows you to access your  
camera even if your assigned global IP address changes.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
How the DynamicDNS service works  
DynamicDNS service server  
3.  
2.  
Camera reports new address  
New address registered with  
DNS server  
DNS  
server  
On-site Network  
Camera  
ISP  
4.  
DNS looks up  
current address  
1.  
Global IP address  
changes  
Internet  
5.  
Camera connection established  
Off-site PC  
1. Your ISP assigns a global IP address to your Internet access account that  
changes periodically. This is the address needed to access the camera over  
the Internet.  
2. When your ISP-assigned global IP address changes, your camera  
automatically notifies the DynamicDNS service server of the new address in  
the DynamicDNS. The camera notifies the DynamicDNS service server of the  
new address in DynamicDNS in the following cases.  
When starting the camera  
When an update interval time has been set  
When clicking the [Save] button  
3. The DynamicDNS server contacts the Domain Name System (DNS) server  
and registers your new global IP address to your chosen DynamicDNS  
address (such as "bob.viewnetcam.com").  
4. When you enter your DynamicDNS address in your web browser while away  
from home or the office, the DNS server looks up the global IP address  
assigned to your DynamicDNS address.  
5. The DNS server finds your current global IP address and allows you to connect  
to your camera.  
Note  
Ask your ISP about what type of IP address you are using.  
Some ISPs assign you a local IP address. In this case, the DynamicDNS  
service cannot be used.  
If the camera is using a port number other than 80, the port number must  
be specified at the end of the DynamicDNS URL. For example:  
Using port 80: http://(Cameraname).viewnetcam.com  
Using any other port: http://(Cameraname).viewnetcam.com:Port  
Number  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
2.6 Setting the Date and Time  
The Date and Time page allows you to set and confirm the date and time. The date  
and time are used for the settings of the trigger setting, sensor log, operation time  
and Buffered Image page.  
Note  
Saving a new date and time deletes all buffered images on the internal  
memory.  
1. Click [Date and Time] on the Setup page.  
2. Set each parameter.  
Set [Automatic Time Adjustment] to synchronize the time automatically  
with an NTP server.  
Clicking [Cancel] cancels your settings without saving changes.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Setting  
Description  
Time Setting  
Set the date and format (AM/PM or 24 H). The interface and available  
values depend on the format. The date and time are used for the  
settings of the trigger setting, sensor log, operation time and Buffered  
Image page. Note that the format for the subject and file name of E-  
mails by E-mail or FTP transfer can only be 24 h.  
Automatic Time  
Adjustment  
NTP (Network Time Protocol) server synchronizes the camera's  
internal clock automatically every day. Check the box to enable it.  
Set the NTP server IP address. Set 4 numbers (0—255)  
and 3 periods, such as "192.168.0.253". Note that "0.0.0.0"  
and "255.255.255.255" are not available. Set a host name  
(1—255 characters). Note that [Space], ["], ['], [&], [<] and  
[>] are not available.  
Select your time zone.  
Note  
The camera will not synchronize to the NTP server if there  
is more than a 1 hour difference between the NTP server  
time and the camera's current time. This is to protect the  
camera's time setting from fraudulent NTP server  
tampering, incorrect time information, etc.  
Adjust Clock for  
Daylight Saving  
Time  
During summer time, the internal clock is turned forward an  
hour. The clock will shift one hour forward at the set time  
on the Start Day, and move back one hour at the set time  
on the End Day. Check the box to enable it.  
Note  
An "s" is inserted between the date and time of the time stamp  
when this feature is enabled. The time stamp is printed on  
images transferred by the Image Transfer feature.  
3. Click [Save] when finished.  
The new settings are saved.  
When finished, "Success!" is displayed.  
4. Click [Go to Date and Time page].  
The Date and Time page is displayed.  
Note  
Date and time settings become incorrect depending on the length of time the  
camera is turned on and its internal temperature. Using the Automatic Time  
Adjustment is recommended.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
2.7 Changing Camera Settings  
The Camera page allows you to set the camera name, white balance, AC power  
source frequency and color night view.  
1. Click [Camera] on the Setup page.  
2. Set each parameter.  
Clicking [Cancel] cancels your settings without saving changes.  
Setting  
Description  
Camera Name  
The camera name is displayed on the Single Camera page.  
Enter ASCII characters (see page 145) or characters from  
other languages (1—15 characters for a 1-byte character  
and 1—7 characters for a 2-byte character). Note that  
[Space], ["], ['], [&], [<], and [>] are not available.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Setting  
Description  
White Balance Select from the following options.  
Auto (default)  
Fixed Indoor  
— Automatic adjustment  
— Electric bulb (2800 K)  
Fixed Fluorescent — White (3600 K)  
(White)  
Fixed Fluorescent — Daylight (4000 K)  
(Daylight)  
Fixed Outdoor  
— Solar light (6000 K)  
Note  
The kelvin (symbol: K) is the standard unit for color  
temperature.  
AC Power  
Source  
Frequency  
This setting may correct flickering caused by power line  
frequency.  
50 Hz (default)  
60 Hz  
Color Night  
View  
In the color night view mode, the camera image becomes  
brighter in a low illuminance. The camera image returns to  
normal operation in a bright location.  
If you enable the color night view mode, refresh interval  
may increase.  
Subjects that are moving in low illumination may be  
blurred, not distinguished, or not displayed.  
Note  
When the camera transmits a dark scene, the camera  
image may become white, or horizontal lines may be  
displayed on the screen. This is one of the characteristics  
of a CMOS sensor. This is not a malfunction.  
3. Click [Save] when finished.  
The new settings are saved.  
When finished, "Success!" is displayed.  
4. Click [Go to Camera page].  
The Camera page is displayed.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
3 Registering Users  
3.1 Changing the Authentication Setting and  
Administrator User Name and Password  
The Security: Administrator page allows you to change authentication, and the  
administrator's user name and password. An authentication window allows  
registered users to access the camera.  
Note  
If you access the camera for the first time, the window for setting the  
administrator's user name and password is displayed. Make a note of the user  
name and password so that you will not forget them.  
The user name and password should be secured at your own responsibility.  
Pay attention to the following points.  
Set a user name and password with as many characters as possible.  
Change the password regularly.  
Setting [Permit access from guest users] (permitting access without a User  
Name or Password) or [Permit access from guest users (mobile only)]  
(permitting access without a User Name or Password) at General  
Authentication risks the images being viewed by third parties. Control the  
contents of the images accordingly.  
IMPORTANT  
It is important to limit access to the camera by use of a unique User Name and  
a secret Password. Since the camera is accessed through the Internet it is  
possible that the camera could be accessed by unknown individuals, including  
those who are commonly known as "crackers" to whom you do not want to  
allow access. The use of a unique User Name and a Password known only to  
you will help insure that only authorized individuals are given access to the  
camera. You have the option of proceeding without a User Name and  
Password, but it is strongly recommended that you utilize these protections.  
1. Click [Administrator] on the Setup page.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Operating Instructions  
2. Set each parameter.  
Clicking [Cancel] cancels your settings without saving changes.  
Setting  
Description  
Authentication has 3 phases.  
General  
Authentication  
If you set [Permit access from guest users], the camera  
does not display the authentication window in camera  
access. All guest users can view images without a user  
name and password.  
Note  
If you set [Permit access from guest users], [Login] tab is  
displayed at the top of the page. After you log in as an  
administrator (see page 70), the Setup page and the  
Maintenance page can be accessed.  
If you set [Permit access from guest users (mobile only)],  
an authentication window is not displayed even if you  
access the mobile phone page. All guest users can view  
images without a user name and password.  
If you set [Do not permit access from guest users], an  
authentication window is displayed to access the camera.  
Users must enter the user name and password.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Setting  
Description  
User Name/  
Password  
User Name (6 to 15 characters): Enter the user name.  
Password (6 to 15 characters): Enter the password.  
Note  
The password must be different from the user name.  
Retype Password: Reenter the password.  
Enter ASCII characters (see page 145). Note that [Space],  
["], ['], [&], [<], [>] and [:] are not available.  
Note  
When setting authentication, set the user name and password, and save  
them.  
When users other than an administrator are accessing the camera, the  
[Setup] and [Maintenance] tabs will not be displayed.  
The user name and password are case sensitive.  
3. Click [Save] when finished.  
The new settings are saved.  
When finished, "Success!" is displayed.  
4. Click [Go to Security: Administrator page].  
The Security: Administrator page is displayed.  
Note  
When the user name and password have been changed, the camera displays  
an authentication window. Enter the user name and password, and click [OK].  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Administrator/General Users/Guest Users  
The camera has 3 user levels (administrator, general users and guest users).  
Items  
Administrator  
General Users  
Guest Users  
User Name and  
Password  
Required  
Required  
Not Required  
Number of Users  
Accessible Pages  
1
50  
All Pages  
Pages Except For Pages Except For  
Setup and Setup and  
Maintenance page Maintenance page  
Access Level  
All Operations  
Access level can Access level can  
be set for each  
general user (see users (see page  
page 71). 71).  
be set for guest  
Note  
Guest users mean unregistered users. Set [Permit access from guest users]  
or [Permit access from guest users (mobile only)] on the Security:  
Administrator page (see page 66) to allow access from guest users.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
3.2 Logging in to the Camera  
If you set [Permit access from guest users] on the Security: Administrator page,  
[Login] tab is displayed at the top of the page. After you log in as an administrator,  
the Setup page and the Maintenance page can be accessed.  
1. Click [Login] tab at the top of the page.  
2. Check a login mode, and click [Login].  
Note  
The authentication window is displayed. Enter the user name and password  
set for General Users or Administrator.  
3. Enter a valid user name and password according to the Login mode selected  
in step 2, and click [OK].  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
3.3 Creating, Modifying or Deleting General Users  
The General User page allows you to create, modify or delete general users. Up to  
50 general users can be registered. The access level is set for each general user.  
If you set [Permit access from guest users] or [Permit access from guest users  
(mobile only)] on the Security: Administrator page, the access level can be set for  
guest users.  
Note  
For general users, the Setup and Maintenance tabs are not displayed.  
1. Click [General User] on the Setup page.  
2. To create a general user, click [Create].  
When setting [Do not permit  
access from guest users]  
When setting [Permit access  
from guest users] or [Permit  
access from guest users  
(mobile only)]  
To change the settings of general users or guest users, select their  
name and click [Modify]. The modification page is displayed.  
To delete a general user, select the name and click [Delete]. The  
confirmation page is displayed.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
3. Set each parameter.  
Settings for general users  
Settings for guest users  
Clicking [Cancel] takes you back to the previous page without  
saving changes.  
Setting  
Description  
User ID List  
Up to 50 general users can be registered.  
The list is used to modify or delete general user settings.  
User Name/  
Password  
User Name (6 to 15 characters): Enter the user name.  
Password (6 to 15 characters): Enter the password.  
Note  
The password must be different from the user name.  
Retype Password: Reenter the password.  
Enter ASCII characters (see page 145). Note that [Space],  
["], ['], [&], [<], [>] and [:] are not available.  
Access Level  
An access level is set for each general user.  
Level 1 : Only the camera images can be viewed.  
Level 2 : The camera images can be viewed and the  
brightness can be adjusted.  
4. Click [Save] when finished.  
The new settings are saved.  
When finished, "Success!" is displayed.  
5. Click [Go to General User page].  
The General User page is displayed.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
4 Buffering or Transferring Images  
4.1 Procedures of Buffering or Transferring  
Images  
The procedures from this page to page 96 described the settings of the image  
buffer or transfer. See the procedures below to understand the general outline of  
the settings.  
Buffer/Transfer by Motion  
Buffer/Transfer by Timer (Page 74)  
Detection Signal (Page 84)  
Time Setting  
Image Setting  
Time Setting  
Image Setting  
Image Buffer Frequency Setting  
Image Buffer Frequency Setting  
Transfer Method  
Transfer Method  
Select one from the lists.  
• No Transfer, No Memory Overwrite  
• No Transfer, Memory Overwrite  
• FTP  
Select one from the lists.  
• No Transfer, No Memory Overwrite  
• No Transfer, Memory Overwrite  
• FTP  
• E-mail  
• E-mail  
E-mail Notification  
When Triggered Setting  
Save the settings to complete.  
Save the settings to complete.  
Changing Motion Detection Sensitivity  
(Page 97)  
Notifying the Sensor Log  
(Page 100)  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
4.2 Buffering or Transferring Images by Timer  
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.  
1. Click [Trigger] on the Setup page.  
2. Click a No. to enable buffer/transfer.  
3. Check [Enable Image Buffer/Transfer], and select [Timer] for the trigger, and  
click [Next>].  
Note  
Click [Delete Buffered Images] to delete images already buffered.  
Click [Save] to save the settings. The buffered images will be deleted.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Setting  
Description  
Enable Image  
Buffer/Transfer  
Check the box to enable the Trigger setting. Uncheck the  
box to disable it.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Setting  
Trigger  
Description  
Selecting [Timer] enables the camera to buffer/transfer  
images during the specified date and time by timer.  
Selecting [Motion Detection] enables the camera to buffer/  
transfer images when the motion is detected during the  
specified date and time.  
4. Set the time, and click [Next>].  
Note  
The timer works by an internal clock. Set the date and time before using timer  
buffer/transfer (see page 62).  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Setting  
Description  
Day of the week •  
Check the box to enable the day. Uncheck the box to  
disable it.  
Active Time of  
Trigger  
To set a trigger time, check the time option and set a time  
period. Check the [Always] option if you are not specifying  
a time period.  
5. Set the image settings, and click [Next>].  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Setting  
Description  
Image  
Resolution  
Select an image resolution (640 × 480, 320 × 240 (default)  
or 160 × 120 pixels) for the buffer/transfer.  
Image Quality  
Select the image quality.  
[Favor Clarity] optimizes for good quality.  
[Standard] offers standard quality. (default)  
[Favor Motion] optimizes for enhanced motion.  
[Mobile Phone] is for a transfer to a mobile phone.  
Note  
640 × 480 pixels cannot be set for a transfer to a mobile  
phone.  
6. Set the image buffer frequency, and click [Next>].  
Note  
Due to the network environment, object and the number of simultaneous  
accesses, the camera may not record the number of images that you set. In  
this case, set the image buffer frequency longer.  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Setting  
Description  
Image Buffer  
Frequency  
Select an image buffer frequency to buffer or transfer the  
image. (1 image per hour—15 images per second)  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
7. Select the transfer method, and click [Next>].  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Note  
If you transfer images by E-mail or FTP, confirm that the default gateway and  
DNS server addresses are assigned correctly (see page 45).  
Setting  
Description  
No Transfer, No  
Memory  
Overwrite  
If the internal memory is full, the camera stops buffering.  
No Transfer,  
Memory  
If the internal memory is full, the camera deletes the old  
images, and continues to buffer the image.  
Overwrite  
FTP  
The camera transfers the image to an FTP server (see  
page 78).  
E-mail  
The camera transfers the image by E-mail (see page 80).  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
When you set [FTP] for Transfer Method  
Select [FTP], and click [Next>]. The following page is displayed.  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
Setting  
Description  
Server IP  
Address or  
Host Name  
If you set a server IP address, set 4 numbers (0—255) and 3  
periods, such as "192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available. Or set a host name (1—  
255 characters).  
*1  
Port No.  
Enter a number (1—65535). Usually set to 21.  
*2  
Login ID  
If your ISP requires a login ID, set it (0—63 characters).  
If your ISP requires a password, set it (0—63 characters).  
*2  
Password  
Login Timing •  
Select the login setting for the FTP server. If you set [One  
Time] and the image buffer frequency value is set within 1  
minute, the camera logs in to the server only once. This can  
reduce transfer time.  
Upload File  
Name  
Set a file name on the FTP server to receive the transferred  
files. Enter 1—234 characters. Entering "\" creates directories  
for a file. (E.g. NetworkCamera\image)  
*1  
Overwrite  
Setting  
Selecting [Overwrite File] overwrites the image on the server  
with a newer image. Selecting [Save as New File with Time  
Stamp] saves the image attaching time stamps on the file  
name, and the images are not overwritten.  
(E.g. image20050101093020500.jpg) The underlined  
numbers mean "9h30min20s500ms on January 1, 2005". The  
letter "s" is inserted after the day when referring to a summer  
time zone.  
Data  
Transfer  
Select [Passive Mode] normally. If the transfer does not work,  
select [Active Mode] and check the operation.  
Method  
*1  
*2  
Note that [Space], ["], ['], [&], [<] and [>] are not available.  
Note that ["] is not available.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
When you set [E-mail] for Transfer Method  
Select [E-mail], and click [Next>]. The following page is displayed.  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Note  
The camera works only with an SMTP (Simple Mail Transfer Protocol) server.  
It does not work with mail servers like "Hotmail " that use a web browser.  
®
The date and time (24-h format) is automatically attached to the subject on the  
E-mail. The file name is "image.jpg".  
E.g. When the "camera" is entered on the subject:  
"camera:20050101093020500".  
The underlined numbers mean "9 h 30 min 20 s 500 ms on January 1, 2005".  
The letter "s" is inserted after the day when referring to a summer time zone.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
Setting  
Description  
SMTP Server IP •  
Address or Host  
Name  
If you set a server IP address, set 4 numbers (0—255) and  
3 periods, such as "192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available. Or set a host name  
(1—255 characters).  
*1  
Port No.  
Enter a number (1—65535). Usually set to 25.  
Reply E-mail  
Address  
Set the sender's E-mail address. We recommend you to  
set the administrator's E-mail address.  
*2  
Destination E-  
mail Address  
1—3  
Set up to 3 destination E-mail addresses.  
*2  
*2  
Subject  
Enter a subject with ASCII characters (see page 145) or  
characters from other languages (0—44 characters for a  
1-byte character and 0—22 characters for a 2-byte  
character).  
*2  
Text  
Enter text with ASCII characters (see page 145) or  
characters from other languages (0—63 characters for a  
1-byte character and 0—31 characters for a 2-byte  
character). Note that [end-of-line] key is not available.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Setting  
Description  
How to  
authenticate  
You can select the authentication method: [No authentication],  
[POP before SMTP authentication] and [SMTP authentication].  
POP server authentication may be required by your ISP. In  
that case, set POP before SMTP authentication.  
No authentication: No authentication when sending an e-  
mail.  
POP before SMTP authentication: Some SMTP servers  
that send e-mails do not have an authentication feature.  
Therefore, the camera uses the authentication of a POP  
server that receives e-mails, before sending e-mails.  
POP3 Server  
IP Address or  
Host Name :  
If you set a server IP address, set 4  
numbers (0—255) and 3 periods, such as  
"192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available. Or  
set a host name (1—255 characters).  
*1  
Port No.:  
Enter a number (1—65535). Usually set  
to 110.  
*2  
Login ID :  
If your ISP requires a login ID to log in to  
a POP3 server, set it (1—63 characters).  
*2  
Password :  
If your ISP requires a password to log in  
to a POP3 server, set it (0—63  
characters).  
SMTP authentication: Users are authenticated by user  
name and password on the SMTP server. Your ISP must  
support the SMTP authentication. Only the LOGIN and  
PLAIN authentication mechanisms are supported.  
*2  
Login ID :  
If your ISP requires a login ID to log in to  
an SMTP server, set it (1—63  
characters).  
*2  
Password :  
If your ISP requires a password to log in  
to an SMTP server, set it (0—63  
characters).  
*1  
Note that [Space], ["], ['], [&], [<] and [>] are not available.  
Note that ["] is not available.  
*2  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
8. Confirm the settings, and click [Save].  
The new settings are saved.  
When finished, "Success!" is displayed.  
9. Click [Go to Trigger page].  
The Trigger page is displayed.  
Note  
If you are buffering images to the internal memory, the following  
operations also delete all buffered images.  
Turning off the camera.  
Saving the Date and Time page.  
Restarting, updating firmware or resetting the camera to factory  
default.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
4.3 Buffering or Transferring Images by Motion  
Detection Signal  
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.  
Note  
The level of motion detection depends on resolution, image quality, and  
the object being viewed. Check the level by performing motion detection  
recording. (See page 97)  
Enabling Motion Detection delays the frame rate of the camera.  
A change to light or wind conditions may detect motions accidentally.  
Motion Detection may not work in dark areas.  
Objects moving fast may not be detected.  
1. Click [Trigger] on the Setup page.  
2. Click a No. to enable buffer/transfer.  
3. Check [Enable Image Buffer/Transfer], select [Motion Detection] for the trigger,  
and click [Next>].  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Note  
Click [Delete Buffered Images] to delete images already buffered.  
Click [Save] to save the settings. The buffered images will be deleted.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Setting  
Description  
Enable Image  
Buffer/Transfer  
Check the box to enable the Trigger setting. Uncheck the  
box to disable it.  
Trigger  
Selecting [Timer] enables the camera to buffer/transfer  
images during the specified date and time by timer.  
Selecting [Motion Detection] enables the camera to buffer/  
transfer images when the motion is detected during the  
specified date and time.  
4. Set the time, and click [Next>].  
Note  
The timer works by an internal clock. Set the date and time before using timer  
buffer/transfer (see page 62).  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Setting  
Description  
Day of the week •  
Check the box to enable the day. Uncheck the box to  
disable it.  
Active Time of  
Trigger  
To set a trigger time, check the time option and set a time  
period. Check [Always] if you are not specifying a time  
period.  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
5. Set the image settings, and click [Next>].  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Setting  
Description  
Image  
Resolution  
Select an image resolution (640 × 480, 320 × 240 (default)  
or 160 × 120 pixels) for the buffer/transfer.  
Image Quality  
Select the image quality.  
[Favor Clarity] optimizes for good quality (The motion may  
be slow down).  
[Standard] offers standard quality. (default)  
[Favor Motion] optimizes for enhanced motion (The image  
quality may decrease).  
[Mobile Phone] is for a transfer to a mobile phone.  
Note  
640 × 480 pixels cannot be set for a transfer to a mobile  
phone.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
6. Set the image buffer frequency and the Motion deactivation time, and click  
[Next>].  
Note  
Due to the network environment, object and the number of simultaneous  
accesses, the camera may not record the number of images that you set. In  
this case, set the image buffer frequency longer.  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Setting  
Description  
Enable Pre-  
trigger Image  
Buffer  
Check the box to enable the setting. The camera buffers or  
transfers the image right before the motion detection signal  
is detected.  
Set an interval, number of images to buffer and total  
number (see page 146). The number of buffered images  
may not match the total number due to memory capacity,  
image resolution, image quality or what object you view.  
Enable Post-  
trigger Image  
Buffer  
Check the box to enable the setting. The camera buffers or  
transfers the image right after the motion detection signal  
is detected.  
Set an interval, number of images to buffer and total  
number (see page 146). The number of buffered images  
may not match the total number due to memory capacity,  
image resolution, image quality or what object you view.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Setting  
Description  
Motion  
deactivation  
time  
Set the length of time during which the Motion Detection  
cannot be triggered after saving images temporarily or  
transmitting them. This function is recommended to  
prevent sending too many E-mails to a mobile phone.  
After detecting motions, the camera does not detect  
motions during motion deactivation time, so some images  
may not be captured.  
Note  
The internal memory cannot buffer images during motion  
deactivation time. Because of this, images taken before  
detection are not saved in internal memory, and so cannot  
be received. Depending on the settings for image buffer/  
transfer, even if it is set to, for example, take "1 image per  
second, and store 10 images, before detection", since the  
images are not stored in internal memory, if the Motion  
Detection detects something directly after the end of  
motion deactivation time, the images may not be saved.  
Ten seconds after the end of motion deactivation time,  
images can be received as specified in the settings (see  
page 96).  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
7. Select the transfer method, and click [Next>].  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
Note  
If you transfer images by E-mail or FTP, confirm that the default gateway and  
DNS server addresses are assigned correctly (see page 45).  
Setting  
Description  
No Transfer, No  
Memory  
Overwrite  
If the internal memory is full, the camera stops buffering.  
No Transfer,  
Memory  
If the internal memory is full, the camera deletes the old  
images, and continues to buffer the image.  
Overwrite  
FTP  
The camera transfers the image to an FTP server (see  
page 90).  
E-mail  
The camera transfers the image by E-mail (see page 92).  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
When you set [FTP] for Transfer Method  
Select [FTP], and click [Next>]. The following page is displayed.  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
Setting  
Description  
Server IP  
Address or  
Host Name  
If you set a server IP address, set 4 numbers (0—255) and 3  
periods, such as "192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available. Or set a host name (1—  
255 characters).  
*1  
Port No.  
Enter a number (1—65535). Usually set to 21.  
*2  
Login ID  
If your ISP requires a login ID, set it (0—63 characters).  
If your ISP requires a password, set it (0—63 characters).  
*2  
Password  
Login Timing •  
Select the login setting for the FTP server. If you set [One  
Time] and the image buffer frequency value is set within 1  
minute, the camera logs in to the server only once. This can  
reduce transfer time.  
Upload File  
Name  
Set a file name on the FTP server to receive the transferred  
files. Enter 1—234 characters. Entering "\" creates directories  
for a file. (E.g. NetworkCamera\image)  
*1  
Overwrite  
Setting  
Selecting [Overwrite File] overwrites the image on the server  
with a newer image. Selecting [Save as New File with Time  
Stamp] saves the image attaching time stamps on the file  
name, and the images are not overwritten.  
(E.g. image20050101093020500.jpg) The underlined  
numbers mean "9h30min20s500ms on January 1, 2005". The  
letter "s" is inserted after the day when referring to a summer  
time zone.  
Data  
Transfer  
Select [Passive Mode] normally. If the transfer does not work,  
select [Active Mode] and check the operation.  
Method  
*1  
*2  
Note that [Space], ["], ['], [&], [<] and [>] are not available.  
Note that ["] is not available.  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
When you set [E-mail] for Transfer Method  
Select [E-mail], and click [Next>]. The following page is displayed.  
Clicking [<Back] takes you back to the previous page.  
Clicking [Cancel] takes you back to the Trigger page without saving  
changes.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
Note  
The camera works only with an SMTP (Simple Mail Transfer Protocol)  
server. It does not work with mail servers like "Hotmail" that use a web  
browser.  
The date and time (24-h format) is automatically attached to the subject  
on the E-mail. The file name is "image.jpg".  
E.g. When the "camera" is entered on the subject:  
"camera:20050101093020500".  
The underlined numbers mean "9 h 30 min 20 s 500 ms on January 1,  
2005". The letter "s" is inserted after the day when referring to a summer  
time zone.  
Setting  
Description  
SMTP Server IP •  
Address or Host  
Name  
If you set a server IP address, set 4 numbers (0—255) and  
3 periods, such as "192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available. Or set a host name  
(1—255 characters).  
*1  
Port No.  
Enter a number (1—65535). Usually set to 25.  
Reply E-mail  
Address  
Set the sender's E-mail address. We recommend you to  
set the administrator's E-mail address.  
*2  
Destination E-  
mail Address  
1—3  
Set up to 3 destination E-mail addresses.  
*2  
*2  
Subject  
Enter a subject with ASCII characters (see page 145) or  
characters from other languages (0—44 characters for a 1-  
byte character and 0—22 characters for a 2-byte  
character).  
*2  
Text  
Enter text with ASCII characters (see page 145) or  
characters from other languages (0—63 characters for a 1-  
byte character and 0—31 characters for a 2-byte  
character). Note that [end-of-line] key is not available.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Setting  
Description  
How to  
authenticate  
You can select the authentication method: [No authentication],  
[POP before SMTP authentication] and [SMTP authentication].  
POP server authentication may be required by your ISP. In  
that case, set POP before SMTP authentication.  
No authentication: No authentication when sending an e-  
mail.  
POP before SMTP authentication: Some SMTP servers  
that send e-mails do not have an authentication feature.  
Therefore, the camera uses the authentication of a POP  
server that receives e-mails, before sending e-mails.  
POP3 Server  
IP Address or  
Host Name :  
If you set a server IP address, set 4  
numbers (0—255) and 3 periods, such as  
"192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available. Or  
set a host name (0—255 characters).  
*1  
Port No.:  
Enter a number (1—65535). Usually set  
to 110.  
*2  
Login ID :  
If your ISP requires a login ID to log in to  
a POP3 server, set it (1—63 characters).  
*2  
Password :  
If your ISP requires a password to log in  
to a POP3 server, set it (0—63  
characters).  
SMTP authentication: Users are authenticated by user  
name and password on the SMTP server. Your ISP must  
support the SMTP authentication. Only the LOGIN and  
PLAIN authentication mechanisms are supported.  
*2  
Login ID :  
If your ISP requires a login ID to log in to  
an SMTP server, set it (1—63  
characters).  
*2  
Password :  
If your ISP requires a password to log in  
to an SMTP server, set it (0—63  
characters).  
*1  
Note that [Space], ["], ['], [&], [<] and [>] are not available.  
Note that ["] is not available.  
*2  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
8. After you confirm the settings and click [Next>], set E-mail notification and click  
[Next>].  
If you select [Enable], the E-mail Notification When Triggered page is  
displayed. Enter the settings referring to page 92 — page 94.  
Setting  
Description  
Disable  
The camera does not send an E-mail notification when  
buffering or transferring images.  
Enable  
The camera sends an E-mail notification up to 3  
destinations when buffering or transferring images.  
9. Click [Save] after confirming the settings.  
The new settings are saved.  
When finished, "Success!" is displayed.  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
10. Click [Go to Trigger page].  
The Trigger page is displayed.  
Note  
If you set a short interval when transferring to a mobile phone, many E-  
mails will be sent, which may lead to a large phone bill. Therefore, we  
recommend you to set a long interval. 1 image per minute frequency is  
recommended.  
Motion Detection transfer stops operating until after the camera finishes  
all transfers. For example, if the camera transfers 3 images per minute and  
6 images in total by setting 1 minute for motion deactivation time, the  
sensor will follow the pattern below.  
120 seconds  
1 minute  
Motion  
deactivation time  
1st 2nd 3rd 4th 5th 6th  
Detectable  
Undetectable  
Undetectable Detectable  
A Motion Detection signal is detected.  
If you are buffering images to the internal memory, the following  
operations also delete all buffered images.  
Turning off the camera.  
Saving the Date and Time page.  
Restarting, updating firmware or resetting the camera to factory  
default.  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
4.4 Setting the Motion Detection  
The Motion Detection page allows you to adjust the sensitivity of Motion Detection.  
Threshold: If the threshold is set low, this function detects nearly all movements.  
Sensitivity: If you set sensitivity high, the amplitude of the motion detection bar gets  
jumpy.  
1. Click [Motion Detection] on the Setup page.  
2. Click the Motion Detection bar in Threshold to set the threshold level.  
3. Click the Motion Detection bar in Sensitivity to set the sensitivity level.  
4. Click [Save] to save the settings.  
Clicking [Cancel] cancels your settings without saving changes.  
5. Click [Go to Motion Detection page].  
The Motion Detection page is displayed.  
Setting  
Description  
Threshold  
Adjusts the threshold for Motion Detection. As the value is  
set lower, the sensor will detect motions of smaller  
changes.  
Sensitivity  
Adjusts the sensitivity for Motion Detection. As the value is  
set higher, the amplitude of the Motion Detection bar will  
become greater.  
Preview  
Display the current threshold and detection level.  
The threshold is the line between the green and red bar.  
The detection level is the line between the dark red and light red color.  
The Threshold and Sensitivity settings are enabled after saving, and  
reflected in preview.  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Threshold  
Note  
No responsibility will be taken by our company with respect to consequences  
resulting from the use of the Motion Detection feature. The Motion Detection  
feature is not suitable and not recommended for uses that require a high  
reliability constantly such as surveillance, etc.  
What is the threshold?  
The threshold is the minimum value for the camera to detect motions on the image  
during the motion detection buffering. Setting the threshold lower allows subtler  
changes to be detected. Setting the threshold higher allows only bigger changes  
that might occupy half the image to be detected.  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
What is the sensitivity?  
The sensitivity is the level of brightness detected as motion by the camera. A high  
sensitivity setting enables the camera to detect slight brightness changes. Lower  
the sensitivity to make the camera detect only big brightness changes.  
Threshold  
setting is  
displayed.  
The detection level exceeds the  
threshold when motions are  
detected.  
Note  
Lowering the threshold and increasing sensitivity enable the camera to easily  
detect slight movements on parts of the image.  
Note  
Motion Detection is activated by changes in the outline of objects and  
brightness changes. This feature is designed to alleviate false detections  
due to overall brightness changes caused by sunlight. But in some cases,  
the camera may falsely detect rapid brightness changes by artificial light  
such as fluorescent light. In other cases, the motion detection function on  
the Network Camera Recorder may detect objects and brightness  
changes. The way to detect motion differs between the camera and the  
Network Camera Recorder. Additionally, if the object's color is similar to  
the color of the background, motion can be hard to detect.  
The detection level depends on the object, resolution, or image quality.  
Confirm the condition on the Preview window following the procedure  
above.  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
4.5 Setting Sensor Log Notification  
A sensor log sent once a day at a specified time can be checked. To enable Sensor  
Log, set Motion Detection for Trigger Setting and check [Enable].  
1. Click [Sensor Log] on the Setup page.  
When enabling the image/buffer transfer setting and selecting Motion  
Detection in the Trigger page, the Sensor log window is displayed.  
2. Set each parameter.  
3. Click [Save].  
Clicking [Cancel] cancels your settings without saving changes.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
4. Click [Go to Sensor Log page].  
The Sensor log is displayed.  
Note  
New sensor logs are deleted to click [Save].  
Setting  
Description  
Sensor log operation can be set here.  
A setup of  
operation  
Time  
Set the day of the week and time to send sensor logs via  
E-mail.  
SMTP Server IP •  
Address or Host  
Name  
If you set a server IP address, set 4 numbers (0—255) and  
3 periods, such as "192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available. Or set a host name  
(1—255 characters).  
*1  
Port No.  
Enter a number (1—65535). Usually set to 25.  
Reply E-mail  
Address  
Set the sender's E-mail address. We recommend you to  
set the administrator's E-mail address.  
*2  
Destination E-  
Set up to 3 destination E-mail addresses.  
mail Address 1-  
*2  
3
*2  
Subject  
Enter a subject with ASCII characters (see page 145) or  
characters from other languages (0—44 characters for a 1-  
byte character and 0—22 characters for a 2-byte  
character).  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Setting  
Description  
How to  
authenticate  
You can select the authentication method: [No authentication],  
[POP before SMTP authentication] and [SMTP authentication].  
POP server authentication may be required by your ISP. In  
that case, set POP before SMTP authentication.  
No authentication: No authentication when sending an e-  
mail.  
POP before SMTP authentication: Some SMTP servers  
that send e-mails do not have an authentication feature.  
Therefore, the camera uses the authentication of a POP  
server that receives e-mails, before sending e-mails.  
POP3 Server  
IP Address or  
Host Name :  
If you set a server IP address, set 4  
numbers (0—255) and 3 periods, such as  
"192.168.0.253". Note that "0.0.0.0" and  
"255.255.255.255" are not available. Or  
set a host name (0—255 characters).  
*1  
Port No.:  
Enter a number (1—65535). Usually set  
to 110.  
*2  
Login ID :  
If your ISP requires a login ID to log in to  
a POP3 server, set it (1—63 characters).  
*2  
Password :  
If your ISP requires a password to log in  
to a POP3 server, set it (0—63  
characters).  
SMTP authentication: Users are authenticated by user  
name and password on the SMTP server. Your ISP must  
support the SMTP authentication. Only the LOGIN and  
PLAIN authentication mechanisms are supported.  
*2  
Login ID :  
If your ISP requires a login ID to log in to  
an SMTP server, set it (1—63  
characters).  
*2  
Password :  
If your ISP requires a password to log in  
to an SMTP server, set it (0—63  
characters).  
*1  
Note that [Space], ["], ['], [&], [<] and [>] are not available.  
Note that ["] is not available.  
*2  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
5 Using Other Features  
5.1 Changing Initial Settings on the Single  
Camera page or the Multi-Camera page  
The Image Display page allows you to change the initial settings (display settings  
when a user accesses the camera) for the Single Camera, Multi-Camera, Limit  
Continuous Motion JPEG, Language and Banner Display.  
1. Click [Image Display] on the Setup page.  
2. Set each parameter.  
Clicking [Cancel] cancels your settings without saving changes.  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Operating Instructions  
Setting  
Description  
Select the image resolution.  
640 × 480 pixels (only for the Single Camera page)  
320 × 240 pixels (default)  
Image Resolution  
160 × 120 pixels (only for the Multi-Camera page)  
Image Quality  
Select the image quality.  
[Favor Clarity] optimizes for good quality (The motion  
may be slow down).  
[Standard] offers standard quality. (default)  
[Favor Motion] optimizes for enhanced motion (The  
image quality may decrease).  
Refresh Interval  
Select a refresh interval.  
(Motion, 3 s, 5 s, 10 s, 30 s, and 60 s)  
Limit Continuous  
Motion JPEG  
Limit time of  
Continuous  
Motion JPEG  
Set the time to change the video (Motion JPEG) to still  
images. (10 seconds—Unlimited)  
Refresh  
Interval  
Set a refresh interval after the image is changed to still  
images. (3-second interval—60-second interval)  
Language  
Select the initial language from English, Japanese,  
French, German, Italian, Spanish, Simplified Chinese,  
Russian or Korean. The selected language is displayed  
as the initial language on the Top, Single Camera,  
Multi-Camera and Buffered Image pages. If you select  
English, Japanese, French or Simplified Chinese, all  
pages can be changed. But if you select another  
language, the Setup, Maintenance and Support pages  
are displayed in English.  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Setting  
Description  
Banner Display  
When checked to [Enable], the setting will be enabled.  
When unchecked, the setting will be disabled.  
Note  
When the Banner Display is enabled, the camera  
accesses the Image URL every time the Single  
Camera page is displayed. The intermittent and  
continuous switching of the Single page burdens  
the PC that stores the image linked with the URL.  
If the image URL linked with an image stored in a  
PC that requires an authentication is set, the  
authentication window will be displayed when  
displaying the Single page.  
Banner user  
All users  
: The banner can be displayed for  
all users.  
Administrator only : The banner can be displayed for  
the administrator only.  
General user only : The banner can be displayed for  
the general users only.  
*1  
Image URL  
Enter the image URL you want to display as a banner.  
When [Enable] is checked, enter the image URL. (1—  
127 characters)  
*1  
Link URL  
Enter the target URL you want to display when clicking  
the banner. (0—127 characters)  
*1  
Note that [Space], ["], ['], [&], [<], and [>] are not available.  
3. Click [Save] when finished.  
The new settings are saved.  
When finished, "Success!" is displayed.  
4. Click [Go to Image Display page].  
The Image Display page is displayed.  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
5.2 Configuring Multiple Cameras  
The Multi-Camera Setup page allows you to configure camera IP addresses and  
camera names to view multiple images on the Multi-Camera page. These  
configurations are required to use the Multi-Camera page. Up to 12 cameras can  
be configured. The Selfcamera is registered at No. 1 by default.  
1. Click [Multi-Camera] on the Setup page.  
2. Click Add.  
Note  
If you click the camera number, the modification page is displayed.  
Camera settings can be modified or deleted here.  
If you configured multiple cameras, you can change the camera number.  
Select the number, and click [Move].  
3. Set each parameter.  
Clicking [Cancel] cancels your settings without saving changes.  
By clicking [Clicking this link, enters this camera's settings.], the settings  
of the Selfcamera are entered automatically. "selfcamera" is displayed for  
the IP Address or Host Name, "--" is displayed for the Port No., and the  
model no. is displayed for the Camera Name.  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Setting  
Display  
Description  
Check this box to enable the camera.  
*1  
IP Address or  
Set an IP address or host name to enable the camera.  
*2  
Host Name  
Port No.  
Set a port number (1—65535).  
*3  
Camera Name  
This camera name is displayed only on the Multi-Camera  
page.  
*1  
*2  
Set 4 numbers (0—255) and 3 periods, such as "192.168.0.253". Note that  
"0.0.0.0" and "255.255.255.255" are not available.  
Enter ASCII characters for the host name (see page 145). Note that [Space],  
["], ['], [#], [&], [%], [=], [+], [?], [<] and [>] are not available.  
Enter 1—255 characters.  
*3  
You can enter ASCII characters (see page 145) or characters from other  
languages (1—15 characters for a 1-byte character and 1—7 characters for a  
2-byte character). Note that [Space], ["], ['], [#], [&], [%], [=], [+], [?], [:], [<], and  
[>] are not available.  
Note  
If your camera will only be accessed on your local network, use each  
camera's local IP address and port number.  
If you intend to access your camera from the Internet, you must use each  
camera's host name (global IP address) and the port number.  
4. Click [Save] when finished.  
The new settings are saved.  
The Multi-Camera Setup page is displayed.  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
5.3 Specifying Operation Time  
The Operation Time page allows you to limit the time that the camera is in use. The  
camera image turns to a gray screen outside operation time.  
Note  
Your privacy may be compromised if the time period is set incorrectly.  
Confirm the time period after the setup.  
If you access the camera as an administrator, you can view the image  
outside the time period.  
1. Click [Operation Time] on the Setup page.  
2. Click a No. to set the operation time.  
Note  
If No. 1—7 are disabled, the camera can always be operated.  
3. Check [Enable], set the time, and click [Save].  
Clicking [Cancel] takes you back to the previous page without saving  
changes.  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Setting  
Enable  
Description  
Check the box to enable the setting. Uncheck the box to  
disable it.  
Day of the week •  
Operation Time  
Check the box to enable the day. Uncheck the box to  
disable it.  
To set an operation time, check the time option and set a  
time period. Check the [Always] option if you are not  
specifying a time period.  
4. Click [Save] when finished.  
The new settings are saved.  
The Operation Time page is displayed.  
About Operation Time  
In the operation time settings, the enabled settings take priority over the disabled  
settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in  
other settings, the camera can be operated on both Monday and Tuesday.  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
5.4 Changing the Indicator Display  
The Indicator Control page allows you to select an operation for the indicator. There  
are three options.  
Turn indicator on when camera is on.  
Turn indicator on during camera access.  
Never turn indicator on.  
1. Click [Indicator Control] on the Setup page.  
2. Select an option.  
Setting  
Description  
Turn indicator  
onwhencamera  
is on.  
The indicator always turns on or blinks (see page 19).  
Turn indicator  
on during  
camera access.  
The indicator turns green when the camera is being  
accessed.  
Never turn  
The indicator always turns off.  
indicator on.  
Clicking [Cancel] cancels your settings without saving changes.  
Note  
See page 19 for the Indicator Display table.  
Selecting [Never turn indicator on] keeps indicator always off.  
3. Click [Save] when finished.  
The new settings are saved.  
When finished, "Success!" is displayed.  
4. Click [Go to Indicator Control page].  
The Indicator Control page is displayed.  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
6 Camera Maintenance  
6.1 Maintenance page  
(1)  
(2)  
(3)  
(4)  
(5)  
(6)  
(7)  
(8)  
(9)  
Maintenance  
(1) Status  
Displays the camera settings and status (see page 112).  
Displays wireless information (see page 112).  
(2) Wireless Status  
(3) Session Status  
Displays information on access to the camera (see page  
112).  
(4) Sensor Log  
(5) Restart  
Displays sensor logs (see page 113).  
Restarts the camera (see page 113).  
(6) Update Firmware Updates the camera firmware (see page 114).  
(7) Save Settings  
(8) Load Settings  
Creates a configuration file (see page 117).  
Loads settings from a configuration file (see page 118).  
Resets the camera to its default settings (see page 119).  
(9) Reset to Factory  
Default  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Operating Instructions  
6.1.1 Confirming the Status  
The Status page allows you to check the status of the camera. The status  
information provides support for troubleshooting.  
Clicking [Status] displays the following page.  
Note  
See the Panasonic Network Camera support website at http://  
information.  
6.1.2 Confirming the Wireless Status  
The Wireless Status page allows you to check the status of the wireless  
connection. The wireless status information provides support for troubleshooting  
regarding wireless connection.  
Clicking [Wireless Status] displays the following page.  
6.1.3 Confirming Session Status  
Displays the information of clients connected to the camera.  
Clicking [Session Status] displays the following page.  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Operating Instructions  
6.1.4 Confirming Sensor Logs  
Displays up to 50 Sensor Logs in chronological order. Old logs will be overwritten  
by new ones.  
1. Click [Sensor Log] on the Maintenance page.  
2. Sensor Logs are displayed.  
Note  
If the camera is restarted, all sensor logs are deleted.  
Item  
New Sensor Logs  
Date  
Description  
Displays the number of new sensor logs.  
Displays the date and time when the Motion Detection is  
activated.  
Sensor Type  
Displays the Trigger Setting (Motion Detection) on the  
Trigger page.  
6.1.5 Restarting the Camera  
It is possible to restart the camera by disconnecting the AC adaptor from the power  
outlet and reconnecting it again. The camera can also be restarted on the Restart  
page.  
Note  
When the camera is restarted, the buffered images and sensor logs will be  
deleted.  
1. Click [Restart] on the Maintenance page.  
2. Click [Restart].  
Restarting takes about 90 seconds. The Top page is displayed when  
finished.  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Operating Instructions  
6.1.6 Updating the Camera Firmware  
The Update Firmware page allows you to update the camera's firmware. If new  
firmware is available, install it into the camera.  
Note  
Do not turn off the power during a firmware update.  
All buffered images and sensor logs on the internal memory will be  
deleted after the firmware update.  
The firmware version is displayed on the Top page and the Status page.  
1. Download the new firmware from the Panasonic Network Camera support  
on your PC.  
2. Click [Update Firmware] on the Maintenance page.  
3. Click [Update Firmware].  
The procedure can take up to 8 minutes.  
The camera restarts. Restart operation takes up to 90 seconds.  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
The Update page is displayed after about 90 seconds. The firmware  
update process takes about 7 minutes.  
4. Click [Browse...].  
A dialog box is displayed to select the firmware.  
5. Select the firmware (including directory information) and click [Open].  
The firmware file name is displayed.  
6. Confirm the firmware file name, and click [Update Firmware].  
Clicking [Cancel] takes you back to the Top page without updating the  
firmware.  
The following message is displayed during the update. Wait about 5  
minutes.  
The camera restarts automatically after the update.  
The Top page is displayed after about 90 seconds.  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
7. Confirm that the version number on the Top page is updated.  
Updated version  
If the version number is updated, the firmware update is complete.  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
6.1.7 Creating a Configuration File  
A configuration file can be saved on your PC. You can load camera settings from  
the configuration file on the Load Settings page (see page 118).  
Note  
The saved image has contains private information. It is important to prevent  
leaks of private information.  
1. Click [Save Settings] on the Maintenance page.  
2. Click [Save].  
3. Click [Save] on the File Download dialog box.  
4. Specify the location, and click [Save] on the Save As dialog box.  
The configuration file is saved at that location.  
Note  
The file extension (.dat) cannot be changed. If you change it, the settings  
cannot be loaded.  
If you try to update the camera, create a configuration file after updating  
the firmware. If there is a firmware version difference between the camera  
that you create a configuration file from and the camera that you try to load  
settings to, the settings may not have been loaded to the camera.  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
6.1.8 Loading Settings from a Configuration File  
Camera settings can be loaded from a configuration file. If you reset the camera to  
factory default, the camera can load previously used settings from a configuration  
file.  
Note  
The configuration file also saves network settings. When settings are  
loaded, the network settings are also loaded.  
If you try to update the camera, create a configuration file after updating  
the firmware. If there is a firmware version difference between the camera  
that you create a configuration file from and the camera that you try to load  
settings to, the settings may not have been loaded to the camera.  
1. Click [Load Settings] on the Maintenance page.  
2. Click [Browse...].  
3. Select the configuration file on the Choose file dialog box, and click [Open].  
The file name is displayed in the data field.  
4. Confirm the file name, and click [Load].  
5. Click [Restart].  
The camera restarts, and the Top page is displayed.  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
6.1.9 Resetting the Camera to Factory Default  
All camera settings are reset to factory default when the Execute button is clicked.  
To restore the wireless connection, access the camera by using a wired connection  
and set up the wireless configuration (see Getting Started).  
1. Click [Reset to Factory Default] on the Maintenance page.  
2. Click [Execute].  
The indicator blinks orange, and then turns off for 5 seconds.  
All camera settings (user name, password, IP address, subnet mask, etc.)  
are reset to factory default.  
If the camera is reset to factory default, the network connection mode  
changes to [Automatic Setup]. Reconfigure the camera referring to  
Getting Started.  
Note  
Do not turn off the camera during the reset operation.  
The internal clock will not be reset, but the time format will return to AM/  
PM mode (see page 62).  
See page 123—page 131 for the default settings.  
Pressing the FACTORY DEFAULT RESET button resets the camera to  
factory default (see page 122).  
All buffered images on the internal memory are deleted when resetting the  
camera to factory default.  
The reset operation takes about 1 minute.  
If the camera is restarted, all sensor logs are deleted.  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
6.2 Support page  
(1)  
(2)  
(3)  
(4)  
Support  
(1) Help  
Displays the Help page (see page 120).  
(2) Wireless Help  
Displays the Wireless Help page (see page 121).  
(3) Product  
Information  
Displays the product information website (see page  
121).  
(4) Support  
Information  
Displays the support information website (see page  
121).  
6.2.1 The Help page  
The Help page displays explanations for each of the following features.  
Clicking [Help] on the Support page displays the following page.  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Operating Instructions  
6.2.2 The Wireless Help page  
The Wireless Help page explains Wireless Basic configuration, Wireless Cipher  
configuration and Wireless Status.  
Clicking [Wireless Help] on the Support page displays the following page.  
Note  
[Wireless Help] is displayed only when logging in as an administrator.  
6.2.3 Product Information  
See the Panasonic Network Camera support website for product information.  
Clicking [Product Information] on the Support page displays the URL, click it.  
Note  
If the camera is not connected to the Internet, the website cannot be displayed.  
6.2.4 Support Information  
See the Panasonic Network Camera support website for support information.  
Clicking [Support Information] on the Support page displays the URL, click it.  
Note  
If the camera is not connected to the Internet, the website cannot be displayed.  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Operating Instructions  
6.3 FACTORY DEFAULT RESET Button  
There is a FACTORY DEFAULT RESET button on the side of the camera.  
FACTORY DEFAULT RESET Button  
(Press the button with a pointed object.)  
Pressing the FACTORY DEFAULT RESET button resets the camera to factory  
default. If you lose your user name and password, use this button to reset the  
camera. To restore the wireless connection, access the camera by using a wired  
connection and set up the wireless configuration (see Getting Started).  
To reset the camera, press the FACTORY DEFAULT RESET button for 1  
second when the camera is on.  
The indicator blinks orange, and then turns off for 5 seconds.  
Do not turn off the camera during the reset operation. The reset operation  
takes about 1 minute.  
Note  
The internal clock will not be reset, but the time format will return to AM/  
PM mode (see page 62).  
See page 123—page 131 for the default settings.  
All buffered images on the internal memory are deleted when resetting the  
camera to factory default.  
If the camera is restarted, all sensor logs are deleted.  
122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
7 Other Information  
7.1 Default Setting List  
Basic  
Items  
Default  
Required  
Note  
Network Connection Mode  
Automatic  
Setup  
-
Automatic Setup/  
Static/DHCP  
Allow Access from the  
Internet (Automatic  
Setup only)  
No  
Enable  
80  
-
-
-
-
Network Configuration  
from Setup Program  
(Static/DHCP only)  
-
Port No.  
(Static/DHCP only)  
20, 21, 25 and 110  
is not available.*2  
IP address  
192.168.0. When  
*1  
(Static only)  
253  
setting Static  
Subnet Mask  
(Static only)  
255.255.  
255.0  
When  
setting Static  
*1  
Host Name  
[Blank]  
When setting 0—63 characters  
(DHCP only)  
DHCP (Not  
*4  
always  
required)  
Default Gateway  
(Static/DHCP only)  
[Blank]  
[Blank]  
When using  
Gateway  
*1  
*1  
DNS Server 1  
DNS Server 2  
When using  
DNS  
(Static/DHCP only)  
Max. Bandwidth Usage  
(Mbps)  
Unlimited  
-
-
0.1, 0.2, 0.3, 0.5, 1  
or Unlimited  
Connection Type  
Auto  
Auto Negotiation,  
Negotiation  
100 Mbps/Full Duplex,  
100 Mbps/Half Duplex,  
10 Mbps/Full Duplex,  
10 Mbps/Half Duplex  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Operating Instructions  
Items  
Default  
802.11b/g  
Auto  
Required  
Note  
Wireless Communication mode  
-
-
-
-
-
(Channel)  
SSID  
NetCam****  
Up to 32  
characters, signs  
or numbers  
(Speed)  
Auto  
-
-
-
-
Encryption (WEP)  
No  
encryption  
Authentication  
WEPKey 1—4  
Open System  
-
-
-
-
ASCII 13  
Characters  
128 bit  
[Blank]  
Disable  
Enable  
UPnP  
Auto Port Forwarding  
-
-
-
-
Display Shortcut Icon in  
My Network Places  
Dynamic DynamicDNS  
DNS  
Disable  
-
Viewnetcam.com/  
User-specified  
DynamicDNS/  
Disable  
DynamicDNS Server  
URL  
[Blank]  
10 min  
When using  
User-  
specified  
1—255  
characters*8  
Updating time  
At the time of  
starting/10, 30  
(min), 1, 3, 6, 12,  
24 (h)  
DynamicDNS  
User Name  
Password  
[Blank]  
[Blank]  
0—63  
characters*9  
0—63  
characters*9  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Items  
Default  
AM/PM  
Required  
Note  
Dateand Time Setting  
-
AM/PM/24 H  
-
Time  
Automatic Time  
Adjustment  
No check  
When using  
NTP  
NTP Server Address or  
Host Name  
[Blank]  
When using  
NTP  
1—255  
characters*4  
Time Zone  
GMT -00:00 When using  
NTP  
-
-
-
Adjust Clock for  
Daylight Saving Time  
No check  
-
Start Day  
Mar,  
Last Sunday,  
1 AM  
-
End Day  
Oct,  
Last Sunday,  
1 AM  
-
-
Camera Camera Name  
Network  
Camera  
Required 1—15 characters  
*6  
White Balance  
Auto  
-
Auto/Fixed Indoor/  
Fixed Fluorescent  
(White)/Fixed  
Fluorescent  
(Daylight)/Fixed  
Outdoor  
AC Power Source  
Frequency  
50Hz  
-
-
50Hz/60Hz  
Color Night View  
Enable  
Enable/Disable  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Account  
Items  
General  
Default  
Required  
Note  
Security:  
Do not permit  
-
-
Administrator Authentication access from  
guest users  
User Name  
[Blank]  
[Blank]  
[Blank]  
When setting 6—15 characters  
administrator *3  
Password  
When setting 6—15 characters  
administrator *3  
Retype  
Password  
When setting 6—15 characters  
administrator *3  
General User User ID List  
User Name  
[Blank]  
[Blank]  
-
-
When setting 6—15 characters  
general user *3  
Password  
[Blank]  
[Blank]  
Level 2  
When setting 6—15 characters  
general user *3  
Retype  
Password  
When setting 6—15 characters  
general user *3  
Access Level  
-
Level 1, Level 2  
126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Buffer/Transfer  
Items  
Default  
Off  
Required  
Note  
Trigger  
Status  
Trigger  
-
-
-
Timer  
Timer/Motion  
Detection  
Active Time of Trigger  
Always  
-
-
-
Image Setting  
(Image Resolution)  
320 × 240  
160 × 120, 320 ×  
240, 640 × 480  
Image Quality  
Standard  
-
Favor Clarity,  
Standard, Favor  
Motion, Mobile  
phone  
Image Buffer  
Frequency  
Every 1 s,  
buffer 1  
image.  
-
1 image per  
hour—15images  
per second  
Motion deactivation  
time  
None  
When  
selecting  
Motion  
None, 10, 30 (s),  
1, 3, 5, 10 (min)  
Detection  
Transfer Method  
Notify  
No Transfer,  
No Memory  
Overwrite  
-
-
-
Disable  
When  
selecting  
Motion  
Detection  
Motion  
Detection  
Threshold  
Sensitivity  
Third blocks  
from the left  
-
-
-
Center  
-
127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Items  
Default  
Required  
Note  
Disable/  
Enable(When  
there is no new-  
Sensor  
Log  
A setup of operation  
Disable  
When  
selecting  
Motion  
Detection in arrival sensor  
Trigger.  
log: Disable)/  
Enable(When  
there is no new-  
arrival sensor  
log: Enable)  
Active Time  
Time  
Checked  
-
PM 12 h 0 min  
AM/PM, 1–12  
(h), 0/10/20/30/  
40/50 (min)  
Notice setup of a  
sensor log  
[Blank]  
-
Port No. (SMTP)  
Port No. (POP)  
Subject  
25  
110  
*2  
*2  
-
Sensor Log  
How to authenticate  
No  
No  
authentication  
authentication/  
POP before  
SMTP  
authentication/  
SMTP  
authentication  
128  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Advanced  
Items  
Default  
Required  
Note  
Image  
Display  
Single Camera Image  
Resolution  
320 × 240  
-
320 × 240 or 640  
× 480  
Single Camera Image  
Quality  
Standard  
-
Favor Clarity,  
Standard or  
Favor Motion  
Single Camera  
Refresh Interval  
Motion  
320 × 240  
Standard  
-
-
-
3, 5, 10, 30, 60  
(s) or Motion  
Multi-Camera Image  
Resolution  
160 × 120 or 320  
× 240  
Multi-Camera Image  
Quality  
Favor Clarity,  
Standard or  
Favor Motion  
Multi-CameraRefresh  
Interval  
Motion  
When  
reducing  
traffic  
3, 5, 10, 30, 60  
(s) or Motion  
Limit time of  
Continuous Motion  
JPEG  
Unlimited  
-
Unlimited/10, 30  
(s), 1, 5, 10, 30,  
60 (min)  
Refresh Interval  
Language  
30 s  
-
-
3, 5, 10, 30, 60 (s)  
English  
English/Japanese/  
French/German/  
Italian/Spanish/  
Simplified  
Chinese/Russian/  
Korean  
Banner Display  
Banner user  
No check  
All users  
When  
displaying the  
banner  
-
-
All users/  
Administrator  
only/General  
user only  
Image URL  
Link URL  
[Blank]  
[Blank]  
-
-
1—127 Characters*4  
0—127 Characters*4  
129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Items  
Default  
Required  
Note  
Multi-  
Multi-Camera  
No.1  
-
-
Camera  
Selfcamera  
Display  
Checked  
When setting  
Multi-Camera  
-
IP Address or Host  
Name  
selfcamera  
When setting IP address*1  
Multi-Camera Host name*5 is  
1—255  
characters.  
Port No.  
--  
When setting 20, 21, 25 and  
Multi-Camera 110 are not  
available.*2  
Camera Name  
BL-C20  
When setting 1—15 characters  
Multi-Camera *7  
Change Camera  
Order  
From No.1 To  
No.1  
-
-
-
No.1—No.12  
Operation Operation Time  
Time  
Always  
-
Indicator Indicator Control  
Control  
Turn indicator  
on when  
camera is on  
Turn indicator on  
when camera is  
on./Turn  
indicator on  
during camera  
access./Never  
turn indicator on.  
130  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
*1 Set 4 numbers (0—255) and 3 periods, such as "192.168.0.253". Note that  
"0.0.0.0" and "255.255.255.255" are not available.  
*2 Set the number of 1—65535.  
*3 Enter ASCII characters (see page 145). Note that [Space], ["], ['], [&], [<], [>]  
and [:] are not available.  
*4 Enter ASCII characters for the host name (see page 145). Note that [Space],  
["], ['], [&], [<], and [>] are not available.  
*5 You can enter a ASCII characters (see page 145). Note that [Space], ["], ['], [#],  
[&], [%], [=], [+], [?], [<], and [>] are not available.  
*6 You can enter a ASCII characters (see page 145) or characters from other  
languages (1—15 characters for a 1-byte character and 1—7 characters for a  
2-byte character). Note that [Space], ["], ['], [&], [<], and [>] are not available.  
*7 You can enter a ASCII characters (see page 145) or characters from other  
languages (1—15 characters for a 1-byte character and 1—7 characters for a  
2-byte character). Note that [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], and [>]  
are not available.  
*8 [Space] and ["] are not available.  
*9 ["] and [:] are not available.  
131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
7.2 Cleaning  
Only clean the camera after it has been turned off by disconnecting the AC adaptor.  
7.2.1 Cleaning the Main Unit  
After taking away the dust on the main unit, wipe it with a soft, dry cloth.  
Note  
Do not use alcohol, polishing powder, cleanser, benzine, thinner, wax,  
petroleum products or hot water to wipe the camera. Also avoid glass  
cleaner, pesticide or hair spray. They may cause change in the shape or  
color of the camera.  
Do not directly touch the lens. Fingerprints may cause an unclear image.  
7.2.2 Cleaning the Lens  
A dusty lens may cause unclear images. Remove the dust with a cotton bud.  
Note  
Do not touch the lens directly. Fingerprints may cause an unclear image.  
132  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Operating Instructions  
7.3 Setting an IP Address on Your PC  
Your PC's IP address can be assigned by following the procedures below.  
1. Display the TCP/IP Properties window.  
The steps are different depending on your OS.  
OS  
Steps  
Windows XP  
[Start] ( [Settings]) [Control Panel] [Network and  
Internet Connections] [Network Connections] [Local Area  
Connection] in use [Properties] Select Internet Protocol  
[TCP/IP] [Properties] [Use the following IP address]  
Windows 2000 [Start] [Settings] [Control Panel] [Network and Dial-up  
Connections] [Local Area Connection] in use  
[Properties] Select Internet Protocol [TCP/IP]  
[Properties] [Use the following IP address]  
Windows Me,  
[Start] [Settings] [Control Panel] [Network] Select  
Windows 98SE [TCP/IP] with adaptor in use [Properties] [IP Address]  
[Specify an IP address]  
When using Windows XP and Windows 2000, log in as an administrator  
to access the TCP/IP Properties window.  
2. Enter the IP address and subnet mask.  
3. Click [OK].  
In Windows Me or Windows 98SE, the PC needs to be restarted to enable  
the settings.  
Local IP Address  
A local IP address is a network ID that is not used on the Internet. Local IP  
Addresses are classified into Class A, Class B and Class C, as shown below. Set  
an IP address within the range specified in the class corresponding to your local  
network.  
Class  
Class A  
Class B  
Class C  
Subnet Mask  
255. 0. 0. 0  
Local IP Address  
10. 0. 0. 1  
10. 255. 255. 254  
255. 255. 0. 0  
255. 255. 255. 0  
172. 16. 0. 1  
172. 31. 255. 254  
192. 168. 0. 254  
192. 168. 0. 1  
133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
7.4 Using Setup Program  
The Setup Program can be used for the following purposes.  
Finding the IP address and port number of the camera connected to your  
network.  
Setting up the camera automatically.  
Setting camera names manually. Configuring the Static or DHCP setting.  
Displaying the Setup page.  
Finding the camera  
1. Insert the CD-ROM into the CD-ROM drive of your PC.  
If the Panasonic Network Camera Setup window does not appear, click  
"setup.exe" on the CD-ROM.  
2. Click [Camera Setup].  
Displays version information  
about this program.  
Sets up the camera.  
Displays the camera manuals.  
If your PC does not have Adobe  
Acrobat Reader , install it from  
the Adobe Reader website.  
®
®
®
Installs the Network Camera  
Recorder Single Camera  
Version.  
Closes the Setup Program.  
134  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
If the following dialog box is displayed, click [Unblock].  
You can find the camera IP address and port number by looking up the  
MAC address of your camera.  
MAC  
Address  
Port  
No.  
Camera  
Status  
IP  
Camera  
List window  
Address  
Note  
When trying to find multiple cameras, the MAC address on the rear side  
verifies which camera you are setting up.  
See page 138 for details about setup from the MAC address.  
135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
Automatic Setup (Local or Internet Access) or Manual Setup  
1. Click [Execute] on the Camera List window shown on page 135.  
2. Click the corresponding button.  
Sets up the camera to be viewed  
on the LAN.  
Sets up Internet access to the  
camera.  
Manually sets up the camera.  
Displays the Setup page (see  
page 42).  
Note  
See Getting Started for local and Internet access setup.  
136  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Manual Setup window  
Set up each parameter referring to page 47 and page 49.  
If more than 20 minutes have passed since the camera was turned  
on, the camera cannot be set up from the Setup Program. If the  
camera cannot be set up, restart the camera.  
If "Camera setup completed" is displayed, click [Close] to finish Manual  
Setup.  
3. Close all Setup windows.  
137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Setting up the Camera Using the MAC Address on the Setup  
Program  
The Setup Program may not list any cameras due to your firewall or antivirus  
software settings on your PC. If you cannot disable your firewall or antivirus  
software, you can set up the camera using the camera MAC address as shown  
below.  
1. Enter the camera MAC address in the data field, and click [Set up camera].  
Note  
The camera's MAC address can be found on the sticker affixed to the rear  
of the camera (see page 20).  
2. After confirming the network settings, click [OK].  
After about a minute, the Security: Administrator page is displayed.  
138  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
3. Enter the user name and password, and click [Save].  
4. The Enter Network Password window is displayed. Enter the user name and  
password that you set above, and click [OK].  
5. When the Single Camera page is displayed, the setup is complete.  
If a Security Warning window is displayed, click [Yes] (see page 28).  
See page 29 for Security Warning window when using Microsoft Windows  
XP Service Pack 2.  
6. Configure wireless configuration (see page 50).  
139  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Note  
See page 26 for the Single Camera page.  
If you will enable Internet access to the camera, follow the procedures  
below.  
When you are using a router that supports UPnP™  
1. Enable the Auto Port Forwarding feature on the UPnP™ page (see  
page 53).  
2. Register with the DynamicDNS service on the DynamicDNS page  
(see page 56).  
3. Confirm that the camera can be accessed from the Internet (see page  
24).  
If you cannot access the camera, see page 9 of Troubleshooting on the  
CD-ROM.  
When you are using a router that does not support UPnP™  
Follow the procedures shown on page 55.  
140  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
7.5 Setting Your PC  
7.5.1 Setting Proxy Server Settings on a Web Browser  
If a proxy server is not used, these settings are not required. If you are using a  
proxy server, perform the proxy server settings below.  
To communicate with a camera installed within a LAN, changing the web  
browser settings is recommended.  
The firewall of a proxy server in a corporate environment may prevent access  
to the camera. Consult your network administrator.  
Note  
A proxy server is used to protect your network when connected to the  
Internet.  
If the camera is accessed via a proxy server, problems may occur. Consult  
your network administrator before installing the camera.  
If the camera is accessed via a proxy server, the refresh interval may be  
increased.  
How to Set Proxy Server Settings  
The example is Internet Explorer 6.0.  
1. Start up Internet Explorer.  
2. Click [Tools] [Internet Options...].  
141  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
3. Click the [Connections] tab, and click [LAN Settings].  
4. See if the Use a proxy server for your LAN check box is checked or not. If  
checked, click [Advanced...].  
See if this check  
box is checked or not.  
If checked,  
click [Advanced...].  
If not checked, click [Cancel]. Proxy settings are not required.  
142  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
5. Enter the camera's IP address into the Do not use proxy server for addresses  
beginning with data field (e.g.: 192.168.0.253).  
6. Click [OK].  
143  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
7.5.2 Setting UPnP™ to Display Camera Shortcut in My  
Network Places  
To display the camera shortcut in the My Network Places folder, a Windows  
TM  
component should be added. Enable UPnP (Universal Plug and Play) following  
the steps below.  
OS  
Steps  
Windows XP  
[Start] ( [Settings]) [Control Panel] [Add or Remove  
Programs] [Add/Remove Windows Components] Select  
[Networking Services] [Details] Check [UPnP User  
Interface] [OK] [Next] Complete  
Windows XP  
[Start] ( [Settings]) [Control Panel] [Add or Remove  
Service Pack 2 Programs] [Add/Remove Windows Components] Select  
[Networking Services] [Details] Check [Internet Gateway  
Device Discovery and Control Client] and [UPnP User  
Interface] [OK] Complete  
Windows Me  
[Start] [Settings] [Control Panel] [Add/Remove  
Programs] [Windows Setup] tab Select [Communication]  
[Details] Check [Universal Plug and Play] [OK] [OK]  
[Restart] Complete  
Note  
This feature is only available when using Windows XP or Windows Me.  
7.5.3 Setting the Internet Temporary File Setting on the  
Web Browser  
An old image may be displayed. In this case, change the web browser settings  
following the steps below.  
[Tools] [Internet Options] [General] tab [Settings] in the Temporary Internet  
files Check [Every visit to the page] in the Check for newer versions of stored  
pages [OK] [OK] Complete  
144  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
7.6 ASCII Character Table  
ASCII Character Table  
(space)  
@
A
`
p
q
r
s
t
u
v
w
x
y
z
{
0
1
P
Q
!
"
#
$
%
&
'
(
)
*
+
,
-
.
a
b
c
B
2
3
4
5
6
7
8
9
:
;
<
=
>
?
R
S
T
U
V
W
X
Y
Z
[
\
]
^
_
C
D
d
E
e
F
f
G
H
I
J
K
L
M
N
g
h
i
j
k
l
m
n
|
}
~
/
O
o
145  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
7.7 File Size and Number of Buffered Images  
The following table shows the relationship between the file size of the image and  
the maximum number of buffered images.  
Note  
The following file sizes are shown at their maximum value.  
Resolution Items  
Capture  
Favor Standard Favor  
Mobile  
*1  
Clarity  
Motion phone  
About  
50 KB  
About  
33 KB  
About  
-
File Size About 60 KB  
20 KB  
640 × 480  
(pixels)  
Buffered  
Images  
-
About  
80  
About  
120  
About  
200  
-
About  
25 KB  
About  
16 KB  
About  
8 KB  
About  
8 KB  
File Size About 30 KB  
320 × 240  
(pixels)  
Buffered  
Images  
-
About  
160  
About  
250  
About  
500  
About  
500  
About  
7 KB  
About  
5 KB  
About  
3 KB  
About  
3 KB  
File Size About 10 KB  
160 × 120  
(pixels)  
Buffered  
Images  
-
About  
570  
About  
800  
About  
1330  
About  
1330  
*1  
The values shown are the file sizes when transferring to a mobile phone.  
The number of Buffer/Transfer images  
The maximum number of images that can be buffered/transferred depends on  
resolution or image quality. When one or more settings are enabled in Trigger, the  
maximum number of buffered images will be divided equally between each  
enabled setting. As the images are saved on the internal memory, even if images  
cannot be transferred due to server or network failure, the maximum number of  
buffered/transferred images will remain the same.  
Example  
Image Resolution: 320×240, Image Quality: Standard  
The maximum number of buffered images for each setting = About 250 ÷ The  
number of enabled settings  
146  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating Instructions  
The number of enabled settings  
1
2
3
4
5
The maximum number of buffered  
images for each setting  
About About About About About  
250 120 80 60 50  
When [Motion Detection] is set in Trigger, and both [Enable Pre-trigger  
Image Buffer] and [Enable Post-trigger Image Buffer] are checked in  
Image Buffer Frequency  
When checking [No Transfer, Memory Overwrite] for the Transfer Method:  
The number of the pre-triggered images that can be buffered is one third of the  
maximum number of buffered images for each setting.  
Example  
Image Resolution: 320×240, Image Quality: Standard  
The number of enabled settings  
1
2
3
4
5
The maximum number of buffered  
images for each setting (A)  
About About About About About  
250 120 80 60 50  
The maximum number of [Enable  
Pre-trigger Image Buffer] images (B)  
About About About About About  
80 40 25 20 15  
[Approx one third of (A)]  
The actual number of buffered  
images (C)  
About About About About About  
170 80 55 40 35  
(B) The number of [Enable Pre-  
trigger Image Buffer] images (B)  
must follow: (B) < (A) × 1/3  
(D) The total number of the  
[Enable Pre-trigger Image Buffer]  
images (B) and the [Enable Post-  
trigger Image Buffer] images (D)  
must follow: (B) + (D) < (A) - (B)  
147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Example  
The maximum number of buffered images for each setting (A): About 250 images  
The maximum number of [Enable Pre-trigger Image Buffer] images (B): About 80  
images  
A specified number of  
[EnablePre-triggerImage  
Buffer] images (B: about  
80 images) are buffered  
at specified intervals in  
the Pre-trigger memory  
(β) set aside for this  
purpose.  
Buffered image  
memory (can be  
seen by the user)  
Pre-trigger  
memory  
Internal memory  
(A): About 250 images  
β
γ
When motion is detected,  
the images in the Pre-  
trigger memory (β) are  
moved to the buffered  
image memory (γ) so that  
they can be seen by the  
user. Post-trigger images  
are stored in the buffered  
image memory (γ).  
(B): About  
80 images  
(C): About 170 images  
Moving  
Motion is detected  
90  
80  
β
γ
The Pre-trigger memory  
(β) is used for buffering  
new Pre-trigger images  
and not storing buffered  
images.  
Used for buffering  
new Pre-trigger  
images  
Post-trigger images  
are stored  
(D): About 90 images  
Pre-trigger  
memory  
Buffered image memory  
(can be seen by the  
user)  
(B)  
(D): Must be 90 or below.  
148  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
7.8 Specifications  
Network Camera  
Items  
Zoom  
Specifications  
10× digital zoom  
Image Sensor  
Illuminance  
1/4-inch CMOS Sensor 320,000 pixels  
4—10,000 lx (when color night view mode is  
enabled)  
10—10,000 lx (when color night view mode is  
disabled)  
White Balance  
Focus  
Auto/Manual  
Fixed 0.3 m—Infinity  
Caliber Ratio (F No.)  
Viewing Angle  
Exposure  
F2.8  
Horizontal axis: 53 °, Vertical axis: 41 °  
Auto  
Other Specifications  
Items  
Video Compression  
Video Resolution  
Specifications  
JPEG (3 Levels)  
640 × 480, 320 × 240 (default), 160 × 120  
About 250 frames (320 × 240), standard  
*1  
Buffered Image  
*2  
Frame rate  
Max. 7.5 frames/second (640 × 480)  
Max. 15 frames/second (320 × 240 or 160 × 120)  
Supported Protocols  
TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP,  
ICMP, POP3, NTP, UPnP™  
Message Transfer Condition  
Image Transfer Method  
Interface  
Timer or Motion Detection  
*3  
SMTP , FTP  
Wired: 10Base-T/100Base-TX Ethernet RJ-45  
connector × 1  
Wireless: IEEE 802.11b/g (Embedded)  
149  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Instructions  
Other Specifications  
Items  
Specifications  
Indicator Display  
Power/Network Communication/Camera operation/  
Ethernet link  
Dimension (HWD)  
Weight  
About 85 mm × About 85 mm × About 35.5 mm  
165 (Only the unit)  
Power Supply  
AC adaptor (Cord Length: About 3 m)  
Input:  
PQLV206CEY: 100—240 V AC, 50/60 Hz  
PQLV206EY: 220—240 V AC, 50/60 Hz  
Output: 9 V DC, 750 mA  
Consumption: About 4.6 W  
Temperature  
Humidity  
Operation: +5 °C to +40 °C  
Storage: 0 °C to +50 °C  
Operation: 20 %—80 % (No Condensation)  
Storage: 20 %—90 % (No Condensation)  
*1  
The maximum number of frames changes depending on the image quality and resolution.  
Frame rate may slow down depending on the network environment, PC performance, image  
quality or what object you view.  
POP before SMTP authentication and SMTP authentication (PLAIN and LOGIN) are  
supported. SMTP authentication (CRAM-MD5) is not supported.  
*2  
*3  
Wireless Specifications  
Items  
Specifications  
Communication mode  
IEEE 802.11b, 802.11b/g, 802.11g exclusive  
(Communication Standard)  
Data Transfer Mode  
IEEE 802.11b: Direct Sequence Spectrum Spread  
(DS-SS)  
IEEE 802.11g: Orthogonal Frequency Division  
Multiplexing (OFDM)  
Frequency Range  
Channel  
2.412—2.472 GHz  
1—13  
Security  
WEP (64/128/152 bit), SSID  
150  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The information in this document is subject to change without notice.  
Panasonic Communications Co., Ltd.  
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan  
Copyright:  
This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced  
for internal use only. All other reproduction, in whole or in part, is prohibited without the written  
consent of Panasonic Communications Co., Ltd.  
2006 Panasonic Communications Co., Ltd. All Rights Reserved.  
PQQX14971ZA KK0206YR0 (CE)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Washer W 1623 User Manual
Napoleon Fireplaces Outdoor Fireplace BGD42 User Manual
NEC Flat Panel Television PX 42VP4DP A User Manual
NetComm Network Router YML O 3G19W User Manual
Nextar Digital Photo Frame N7 110 User Manual
Nextar GPS Receiver X3 T User Manual
North Star Log Splitter M1108D User Manual
PAC Car Stereo System UPAC NIS2 User Manual
Panasonic Camera Accessories AG HPX173 User Manual
Panasonic CD Player CQ RDP472N User Manual