Model No. KV-S2025C / KV-S2025CU / KV-S2026C / KV-S2026CU
KV-S2045C / KV-S2045CU / KV-S2046C / KV-S2046CU
KV-S2025C
KV-S2025CU
KV-S2026C
KV-S2026CU
KV-S2045C
KV-S2045CU
KV-S2046C
KV-S2046CU
These instructions contain information on operating the scanner. Before reading these
instructions, please read the installation manual enclosed with this unit.
Please carefully read these instructions, the enclosed installation manual and maintenance
manual. Keep all documentation in a safe place for future reference.
Keep the CD-ROM in the protective case. Do not expose the CD-ROM to direct sunlight or
extreme heat and do not scratch or smudge the surface of the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
≥ Power turn-on sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
≥ About LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
≥ About the SCSI setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Before
You Start
Operation
Loading Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Clearing Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
≥ Outside of the scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
≥ Inside the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
≥ Cleaning the rollers and sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Care
and
Maintenance
≥ Replacing the paper feed roller module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
≥ Replacing the retard roller module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
≥ Re-attach the sensor roller for back scanning to the ADF door . . . . . . . . . . . 32
≥ KV-S2025C / KV-S2025CU / KV-S2026C / KV-S2026CU. . . . . . . . . . . . . . . 33
Appendix
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
Federal Communications Commission Requirements
(For United States only)
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC Warning: To assure continued FCC compliance, the user must use only shielded interface cable and the
provided power supply cord. Also, any unauthorized changes or modifications to this equipment would void the
user’s authority to operate this device.
English
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
ANY TYPE OF MOISTURE.
THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY
ACCESSIBLE.
Français
Avertissement:
Pour éviter tout risque d’incendie ou de choc électrique, ne pas soumettre cet appareil à la
pluie ou à l’humidité.
“La prise secteur devra se trouver à proximité de l’appareil et être facilement accessible.”
Deutsch
Warnung:
Zur Verhütung von Feuer dem und elektrischem Schlag dieses Erzeugnis nicht Regen oder
sonstiger Feuchtigkeit aussetzen.
Die Steckdose muß nahe bei diesem Gerät angebracht und leicht zugänglich sein.
Für Benutzer in der BRD
Hinweis:
Maschinenlärminformationsverordnung 3. GSGV, 18.01.1991: Der höchste Schalldruckpegel
beträgt 70 dB(A) oder weniger gemäß EN 27779.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
Español
AVISO:
PARA EVITAR LLAMAS O DESCARGAS ELÉCTRICAS NO EXPONGA ESTE APARATO A
LA LLUVIA NI A LA HUMEDAD.
LA TOMA DE CORRIENTE DEBERÁ ESTAR CERCA DE ESTE EQUIPO Y EN UN LUGAR
DE FÁCIL ACCESO.
Svenska
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
(For United Kingdom only)
For your safety please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 5 amp. fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has
a rating of 5 amps. and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark
or the BSI mark
on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the
fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A
replacement fuse cover can be purchased from your local Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the
plug cut off and disposed of safely.
There is danger of severe electrical shock if the cut off plug is inserted into any 13 amp. socket.
If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified
electrician.
WARNING: This appliance must be earthed.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code.
Green-and-Yellow
Blue
Brown
: Earth
: Neutral
: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the Earth symbol
or coloured Green-and-Yellow.
The wire which is coloured Blue must be connected to the terminal in the plug which is marked with the letter N or
coloured Black.
The wire which is coloured Brown must be connected to the terminal in the plug which is marked with the letter L or
coloured Red.
How to replace the fuse :
Open the fuse compartment with a screwdriver and replace
the fuse.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
English
The product should be used only with a power cord that is supplied by the manufacturer.
Français
Le produit ne devra être utilisé qu’avec le cordon d’alimentation fourni par le fabricant.
Deutsch
Dieses Gerät darf nur mit dem vom Hersteller gelieferten Netzkabel verwendet werden.
Español
Este producto deberá utilizarse solamente con el cable de alimentación suministrado por el
fabricante.
Svenska
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
Roller cleaning paper precautions
Before using the roller cleaning paper, please read these instructions completely. Keep these instructions for future
reference.
English
WARNING
• Do not drink or inhale the roller cleaning paper fluid including isopropyl alcohol.
• The roller cleaning paper may be harmful to your skin, so please use protective gloves.
• Do not use the roller cleaning paper near a heater or open flame.
• Do not store the roller cleaning paper in direct sunlight or in a place over 40 oC (104 oF).
• Only use the roller cleaning paper to clean the rollers and scanning area.
• If you need more information about the roller cleaning paper, please refer to the Material Safety Data Sheet
(MSDS).
• Please ask your Panasonic sales company about obtaining the Material Safety Data Sheet.
KEEP AWAY FROM FIRE.
Français
Avertissement
• Ne pas absorber le liquide du papier de nettoyage de rouleaux fourni ni en respirer les émanations car il contient
de l’alcool isopropylique.
• Le papier de nettoyage de rouleaux pouvant être néfaste pour les peaux sensibles, utiliser des gants de
protection.
• Ne pas utiliser le papier de nettoyage de rouleaux à proximité d’un feu ou d’une flamme vive.
• Ne pas ranger le papier de nettoyage de rouleaux en plein soleil ni à une température dépassant 40 oC (104 oF).
• Utiliser le papier de nettoyage de rouleaux exclusivement pour le nettoyage des rouleaux et de la surface de
balayage.
• Pour tout renseignement complémentaire sur le papier de nettoyage de rouleaux, voir la feuille de données sur
la sécurité du matériel.
• Pour la feuille de données sur la sécurité du matériel, s’adresser au revendeur Panasonic.
NE PAS APPROCHER DU FEU.
Deutsch
WARNUNG
• Die Walzenreinigungspapier-Reinigungsflüssigkeit enthält Isopropylalkohol und darf auf keinen Fall getrunken
oder inhaliert werden.
• Bitte Schutzhandschuhe tragen, da das Walzenreinigungspapier bei empfindlicher Haut Reizungen verursachen
kann.
• Das Walzenreinigungspapier nicht in der Nähe von Heizgeräten oder offenen Flammen verwenden.
• Das Walzenreinigungspapier nicht in direkter Sonneneinstrahlung oder an Orten lagern, an denen Temperaturen von
mehr als 40 oC erreicht werden.
• Zum Reinigen der Walzen und des Scanbereichs ausschließlich das Walzenreinigungspapier verwenden.
• Weitere Informationen zum Walzenreinigungspapier sind dem Materialsicherheits-Datenblatt zu entnehmen.
• Das Materialsicherheits-Datenblatt ist auf Wunsch von Ihrem Panasonic-Fachhändler erhältlich.
VON FEUER FERNHALTEN!
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
Español
ADVERTENCIA
• No beba el líquido del papel de limpieza de rodillos ni aspire las emanaciones del alcohol isopropílico que
contiene.
• El papel de limpieza de rodillos puede ser perjudicial para las pieles sensibles, por favor use guantes de
protección.
• No utilice el papel de limpieza de rodillos cerca de una calefacción o una llama.
• No guarde el papel de limpieza de rodillos expuesto a la luz solar directa ni en un lugar donde la temperatura
sea superior a 40°C.
• Utilice solamente papel de limpieza de rodillos para limpiar los rodillos y el área de escaneado.
• Si necesita más información acerca del papel de limpieza de rodillos, consulte la hoja de datos de seguridad del
material (MSDS).
• Pregunte a la compañía de ventas Panasonic cómo obtener la hoja de datos de seguridad del material.
MANTÉNGALO ALEJADO DEL FUEGO.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
The following precautions are recommended to extend the life of the unit, and for your safety.
Prior to scanning, remove,
all staples and paper clips
from pages.
Do not place any liquids near the unit.
Do not place books, paper,
or other items on the unit.
—Accidental spillage of liquid into the unit
may cause severe damage. If this
occurs, turn the unit off, unplug the
power cord and call for service.
Do not place the unit in an area where there is a lot of Do not leave the power cord plugged into the AC outlet
smoke, dust, chemical fumes or vibration. if the unit is not used for an extended period.
Do not place the unit on an uneven or unstable surface. Do not disassemble the unit.
This will void your warranty.
Do not use the tray hanging out of a When carrying the unit, do not use When carrying the unit, hold the
table.
the trays as handles.
both side grips.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Operating Environment
Do not place the unit in direct sunlight or in a cold Do not use the unit in a vertical position.
draft.
Do not place the unit near a heating appliance or an Do not place the unit near other appliances which gen-
air conditioning vent. Do not place the unit in a room erate large electrical noise.
with extremely high or low humidity.
Do not place the unit on a carpet. (Static electricity Do not drink or inhale the included roller cleaning paper
can cause the unit to malfunction.)
fluid.
The roller cleaning paper may be harmful to your skin,
so please use protective gloves.
Do not use the roller cleaning paper near a heater or
open flame. This may cause a fire.
≥Power Source
≥ Use a voltage level that does not vary more than d10% from the voltage level marked on the nameplate
(located on the back side of the scanner).
≥ Do not use an extension cord.
≥ This scanner should be connected to a grounded outlet.
≥ Do not use a line conditioner, transient suppressor or surge protector.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
∫ CD-ROM
To prevent the CD-ROMs from accidental damages:
Do not touch or write on the surface Do not leave the disc out of the Do not leave the disc in direct
of the disc.
protective case.
sunlight or near heat sources.
Do not place heavy objects on the To clean the disc, hold the disc by
disc case or drop the case.
its edges and wipe it from the
center to the edges with a dry, soft
cloth.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Component Identification
∫ KV-S2025C / KV-S2025CU / KV-S2026C / KV-S2026CU
Document guides
ADF door
Paper feed roller
Feed tray
ADF door release
STOP/START button
LED
Feed extension
tray
Radiation vent
Business card stopper
Exit extension
tray
Exit stopper
Power switch
Business card guides
Exit tray
DIP switch
USB connector
(Only for KV-S2026C,
KV-S2026CU)
SCSI connectors
AC inlet
Power cord
Power cord shown on the figure is
for 100-120 V.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Component Identification
∫ KV-S2045C / KV-S2045CU / KV-S2046C / KV-S2046CU
Document guides
Imprinter door
ADF door
Paper feed roller
ADF door release
Feed tray
STOP/START button
LED
Feed extension tray
Radiation vent
Power switch
Business card
stopper
Exit stopper
Exit extension
tray
Business card
guides
Exit tray
DIP switch
USB connector
(Only for KV-S2046C,
KV-S2046CU)
SCSI connectors
Imprinter door pull
Imprinter door
AC inlet
Power cord
Power cord shown on the figure is
for 100-120 V.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Component Identification
∫ Power turn-on sequence
Turn on the power of the scanner.
1
≥ Press the power switch.
(The LED will now light.)
Turn on the power of the host
computer after scanner’s LED lights
green.
2
≥ In case of the USB connection, the host
computer recognizes the scanner auto-
matically when the scanner is powered on
even after the host computer is powered
on.
LED
∫ About LED
LED indicates the status of the scanner as follows:
LED light
Green
Status
Ready to scan or scanning
Green (flashing)
Orange
Sleep mode
Ready to scan or scanning with warning *1
Orange (flashing)
Initializing
Sleeping with warning *1
Red
An error occurred *2
*1: The rollers need to be cleaned or replaced.
*1*2: Check the status of the scanner using the User utility.
The User utility is included in the CD-ROM.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Component Identification
∫ About the SCSI setting
When connecting the scanner to a SCSI chain using a SCSI cable, perform the SCSI ID setting correctly.
The scanner is provided with a DIP switch for the SCSI ID No. setting and the terminator setting.
SCSI ID Setting
Switch
ID No.
Remarks
#2
#1
#0
0
1
2
3
4
5
6
7
OFF
OFF
OFF
OFF
ON
OFF
OFF
ON
OFF
ON
OFF
ON
ON
OFF
OFF
ON
OFF
ON
ON
ON
OFF
ON
Default setting
ON
ON
SCSI Terminator Setting
Function
Enable
Switch
Description
ON
≥ The last device in the SCSI chain
≥ Default setting
Disable
OFF
Not the last device in the SCSI chain
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents
Documents that have been stapled
together or stacked together (as in a
file folder) will need to be separated.
Prior to scanning, remove, all staples and paper clips
from pages.
1
1 Fan the stack of documents to sepa-
rate all the edges.
2 Hold both ends and bend the docu-
ments as shown in the illustration.
3 To flatten the documents, hold firmly
and pull them apart as shown in the
illustration.
1
Repeat these steps as necessary.
2
3
Carefully align the documents.
2
Adjust the document guides slightly
larger than the actual size of the docu-
ments.
Document guides
3
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents
When scanning paper longer than the
Feed extension tray
4
feed tray, pull out the feed extension
tray from the feed tray and the exit
extension tray as shown in the figure
on the right.
≥ The exit extension tray of KV-S2045C,
KV-S2045CU, KV-S2046C and KV-S2046CU
is fixed. Adjust the position of the exit
stopper.
Exit stopper
Exit extension tray
≥ When using small sized documents like
business cards, raise the business card
guides and the business card stopper.
A
Caution:
Do not use the business card guides and the
business card stopper for larger documents
than their acceptable size. It will cause paper
jams.
Business card guides
Business card stopper
Place the documents on the feed tray
with the side to be scanned facing up.
5
≥ Be sure to place the documents on the
feed tray as shown in the figure on the
right.
Paper feed roller
Feed tray
≥ The amount of documents should not
exceed the limit mark on the document
guide. This may cause a paper jam or
skew.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Documents
Adjust the document guides to the size
of the documents.
Document guides
6
7
Set documents under the paper feed
roller.
Paper feed roller
1
1 Lift the paper feed roller as shown in
the figure.
2 Push documents in the direction of
the arrow until they stop under the
paper feed roller.
2
Caution:
≥ Acceptable documents are as follows.
Paper size: 50.8 k 70 mm (2.0 k 2.8 in.) to 216 k 356 mm (8.5 k 14 in.)
Paper thickness:
Single paper feed: 0.05 to 0.15 mm (2.0 to 5.9 mils)
Continuous paper feed: 0.06 to 0.15 mm (2.36 to 5.9 mils)
Paper weight:
2
Single paper feed: 40 to 127 g/m (10.7 to 33.9 lbs.)
2
Continuous paper feed: 50 to 127 g/m (13.3 to 33.9 lbs.)
If you scan other types of documents, paper jamming or multiple-sheet feeding may occur.
≥ Scanning paper such as carbons or carbonless paper may cause skewing, paper jamming or multiple-sheet
feeding because it makes the rollers dirty and the chemicals may cause the rollers to swell up.
≥ The amount of documents should not exceed the limit mark on the document guide. This may cause a paper
jam or skew.
≥ Be sure to remove the document from the exit tray after it is scanned.
≥ When you scan the irregular or fragile documents, it is recommended to make a copy and use the copy to scan.
≥ When scanning a curled or folded document, load the document after flattening it.
Types of documents to avoid:
≥ OHP sheets, other plastic films, cloths, or metallic sheets.
≥ Paper with irregularities such as tabs, staples, paste, etc.
≥ Documents with wet ink
≥ Thick or irregular documents such as envelopes, documents that are glued together, etc.
≥ Copying paper such as carbon paper
≥ Damaged or wrinkled documents
≥ Irregularly shaped documents
≥ Photographs
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Paper Jams
Torn documents, thin documents or documents that are creased on the top edge may cause paper jams. If a paper
jam occurs, remove the jammed sheet according to the following procedure.
∫ Removing paper jams from the feed part
Push the ADF door release to open the
1 ADF door.
Remove the jammed document.
2
≥ If the jammed document remains at the
feed tray side, pull it up.
≥ If the jammed document appears at the
exit tray side, remove it from the exit side.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Paper Jams
Make sure that the sensor rollers are
3 installed properly, before closing the
Sensor roller (front)
ADF door.
≥ If the sensor rollers are removed, re-
attach them. (Refer to page 32.)
Sensor roller (back)
Close the ADF door.
4
≥ When you close the ADF door, close it
securely until the door is locked.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
∫ Outside of the scanner
Clean the unit at least once a month.
Turn the power off.
1
Clean the cover with a soft cloth.
2
Remove dirt and dust from the radia-
tion vent with a brush.
Radiation vent
3
∫ Inside the scanner
≥ Clean the unit at least once a week or when 20,000 sheets have been scanned, whichever comes first.
≥ Clean the rollers and sensors if paper jamming or multiple-sheet feeding occurs frequently. (Refer to pages 23-
25.)
≥ Clean the CIS glasses and sensor rollers when lines appear on the scanned images. (Refer to pages 25-26.)
≥ If the documents you scan are dirty, then the scanner components will also become dirty. To maintain proper
scanning, clean the scanner components frequently.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
∫ Cleaning the rollers and sensors
Roller cleaning paper:
Open the bag on the dotted line and take out
the roller cleaning paper.
≥ If the roller cleaning paper bag is left opened for
a long period of time before using it, the alcohol
will evaporate. Please use the roller cleaning
paper immediately after opening the bag.
Dotted line
The roller cleaning paper (Model No. KV-SS03)
is available from the dealer where you pur-
chased your scanner.
For supplies and accessories: Call
1-800-346-4768 (U.S.A. only) or your dealer.
Turn the power off.
1
Push the ADF door release to open the
ADF door.
2
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
Use the roller cleaning paper (KV-SS03)
3
to remove the dirt from the surfaces of
the retard roller, paper feed roller,
separation roller, 6 drive rollers, and 6
free rollers. Also, remove dust on the
paper sensors (Paper detector, Waiting
sensor, Starting position sensor) and
reflector sheets with a cotton swab.
Paper detector
Retard roller
Reflector sheets
≥ When wiping off the dirt on the roller sur-
faces, hold the rollers to prevent them
from rotating, and wipe the rollers all the
way around them proceeding from one
end to the other in the directions of the
arrows shown in the figure on the right.
Drive rollers
Drive rollers
Waiting sensor
Paper feed roller
Separation roller
Free rollers
Starting position sensor
Free rollers
Clean the reflector sheet for the ending
4 sensor.
≥ Remove dust on the reflector sheet of the
ending sensor with a cotton swab.
≥ The reflector sheet is behind the shaft.
Reflector sheet
for ending sensor
Cotton swab
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
Make sure that the sensor rollers are
5 installed properly, before closing the
ADF door.
Close the ADF door.
6
Clear the roller cleaning counter with
7 User Utility.
≥ After cleaning the above rollers, click
[Clear Counter] button for [After Clean
Roller] with User Utility.
∫ Cleaning the CIS glasses and sensor rollers
Turn the power off.
1
Push the ADF door release to open the
ADF door.
2
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Unit
Clean the CIS glasses and sensor roll-
ers using the roller cleaning paper.
3
Sensor roller (front)
≥ If the sensor rollers are removed while
cleaning, re-attach them after cleaning.
CIS glass (front)
Sensor roller (back)
Sensor roller (front)
CIS glass (back)
Close the ADF door.
4
≥ When you close the ADF door, close it
securely until the door is locked.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumables
∫ Replacing the paper feed roller module
Turn the power off.
1
Push the ADF door release to open the
ADF door.
2
Push the two green levers down at
both ends of the paper feed roller mod-
ule to unlock the paper feed rollers.
3
≥ When moving the green levers, do not
apply pressure in any other direction
other than in the direction shown by the
arrows. Otherwise the levers may break.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumables
Remove the paper feed roller module
4
straightly, holding up the paper feed
case along the groove of the feed cover
to pull out the claw out of the case.
Claw
Groove
Paper feed case
Install the new paper feed roller mod-
ule with its gear on the right.
5
1 Hang both ends of the paper feed
roller module.
2 While slightly lifting the paper feed
roller module, pass the claw along
the groove of the feed cover.
3 Attach the bearings at both ends of
the paper feed roller module into the
guide grooves of the chassis in the
scanner.
.
Chassis
Bearings
Green levers
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumables
Push up the green levers at both ends
in the direction of the arrows until they
click into place.
6
7
≥ After installing the paper feed roller
module, confirm that the feed rollers
can be moved lightly in vertical direction.
Close the ADF door.
≥ When you close the ADF door, close it
securely until the door is locked.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumables
∫ Replacing the retard roller module
Turn the power off.
1
Push the ADF door release to open the
ADF door.
2
Remove the retard roller cover.
3
Retard roller cover
Remove the retard roller module in the
direction of the arrow.
4
Retard roller module
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Consumables
Install the new retard roller module by
matching the groove of its shaft with
the groove of the metal holder.
Wider groove
5
Make sure that both ends of the shaft
reach the springs of the holder.
Metal holder
Close the retard roller cover.
6
7
Close the ADF door.
≥ When you close the ADF door, close it
securely until the door is locked.
Clear the roller replacing counter with
8 User Utility.
≥ Click [Clear Counter] button for [After
Replace Roller] with User Utility.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
How to re-attach the sensor rollers
If the sensor rollers are removed, re-attach them.
∫ Re-attach the sensor roller for back scanning to the ADF door
Attach the shorter sensor roller to the ADF
door by placing the non-gear side to the ADF
door release.
≥ Match the groove to the guide.
≥ Push the roller, and confirm the sensor is locked
by the springs on both sides.
Springs
∫ Re-attach the sensor roller for front scanning
Attach the longer roller to the unit by placing
the non-gear side to the ADF door release.
≥ Match the groove to the guide.
≥ Attach the side of the ADF door release first, and
attach the other side.
Confirm both rollers move slightly.
≥ Press down on the sensor rollers and rotate them.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Repacking Instructions
∫ KV-S2025C / KV-S2025CU / KV-S2026C / KV-S2026CU
It is highly recommended that you keep the original carton and ALL packing materials. If you need to transport or
ship your scanner, please follow these instructions.
Please Note:
≥ Please use the original carton and all of the original packing materials.
≥ Improper repacking of the scanner may result in a service charge to repair the unit.
≥ The scanner should be handled in the correct (horizontal) position.
Materials Required:
≥ Original Scanner Carton & Packing Materials
≥ Shipping Tape and Scissors
Turn the power switch off and disconnect your scanner from the electrical outlet and the
interface cable.
1
Return the feed extension tray, exit stopper and exit extension tray to their original posi-
tions.
2
Pack the scanner.
3
Power cord
≥ Be sure to use a
power cord whose
shape matches the
shape of the electric
outlet.
CD-ROM (2 pieces)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Repacking Instructions
∫ KV-S2045C / KV-S2045CU / KV-S2046C / KV-S2046CU
It is highly recommended that you keep the original carton and ALL packing materials. If you need to transport or
ship your scanner, please follow these instructions.
Please Note:
≥ Please use the original carton and all of the original packing materials.
≥ Improper repacking of the scanner may result in a service charge to repair the unit.
≥ The scanner should be handled in the correct (horizontal) position.
Materials Required:
≥ Original Scanner Carton & Packing Materials
≥ Shipping Tape and Scissors
Turn the power switch off and disconnect your scanner from the electrical outlet and the
interface cable.
1
Remove the feed extension tray and exit extension tray.
2
Pack the scanner.
3
Power cord
≥ Be sure to use a
power cord whose
shape matches the
shape of the electric
outlet.
Tray
CD-ROM
Note: How to remove the feed extension tray
1 Pull up the tray.
2 With pressing down the center of the tray,
3 pull out the tray.
Feed extension tray
2
2
3
1
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model No.
KV-S2025C
KV-S2026C
KV-S2025CU
KV-S2026CU
KV-S2045C
KV-S2046C
KV-S2045CU
KV-S2046CU
Items
Scanner
Scanning face
Duplex
Scanning method
CIS (Contact-type color image sensor) Front & Back sides
Background: Black sensor roller
Scanning
speed *1
Binary
200 dpi
SimplexApprox. 23 pages/min.
Duplex Approx. 42 images/min. Duplex Approx. 76 images/min.
SimplexApprox. 43 pages/min.
Letter size
portrait
Color
150 dpi
SimplexApprox. 10 pages/min. SimplexApprox. 19 pages/min.
Duplex Approx. 18 images/min. Duplex Approx. 34 images/min.
Scanning
speed *1
Binary
200 dpi
SimplexApprox. 22 pages/min. SimplexApprox. 41 pages/min.
Duplex Approx. 40 images/min. Duplex Approx. 72 images/min.
SimplexApprox. 9 pages/min. SimplexApprox. 18 pages/min.
A4 size
portrait
Color
150 dpi
Duplex Approx. 16 images/min. Duplex Approx. 32 images/min.
Resolution
100-600 dpi (10 dpi step)
Optical: 600 dpi (Main and Sub scanning derections)
Tonal gradation
Binary mode, Gray scale mode (4/8 bit), Dither mode (16/256
step), Error diffusion
Note: Dither and Error diffusion are executed by driver
software or RTIV.
Image control
Image emphasis (5 step), Dynamic threshold, Automatic
separation, Noise reduction, Deskew, Cropping, Mirror image,
Monochrome reversing, Gamma correction
Note: These all functions are executed by driver software or
RTIV.
Other function
Paper
Patch code detection (Kodak patch 2, 3, T)
Note: 1 portion both side each executed only by ISIS driver.
Size
50.8k70 mm (2.0k2.8 in.) to 216k356 mm (8.5k14 in.)
Note: The setting of the paper length is possible to 25 inches in
TWAIN, ISIS and RTIV.
In case of a paper beyond legal size, 1 by 1 paper
scanning in the resolution under 300 dpi is recommended.
Thickness
Weight
Single paper feeding: 0.05 to 0.15 mm (2.0 to 5.9 mils)
Continuous paper feeding: 0.06 to 0.15 mm (2.36 to 5.9 mils)
Note: 1 mil = 1/1000 in.
2
Single paper feeding: 40 to 127 g/m (10.7 to 33.9 lbs.)
2
Continuous paper feeding: 50 to 127 g/m (13.3 to 33.9 lbs.)
2
Note: 1 lbs = 3.75 g/m
Interface (Transfer rate)
Feed tray capacity
SCSI III (20 MB/sec)
USB 2.0 (Only for KV-S2026C, KV-S2026CU, KV-S2046C,
KV-S2046CU)
2
2
120 sheets [64 g/m (17 lbs.)], 100 sheets [75 g/m (20 lbs.)]
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model No.
KV-S2025C
KV-S2026C
KV-S2025CU
KV-S2026CU
KV-S2045C
KV-S2046C
KV-S2045CU
KV-S2046CU
Items
Unit
External dimensions
(WidthkDepthkHeight)
343k487k269 mm
(13.5k19.2k10.6 in.)
Note: When tray is pulled
343k487k239 mm
(13.5k19.2k9.4 in.)
Note: When tray is installed
Weight
8.4 kg (18.5 lbs.)
9.1 kg (20.1 lbs.)
[KV-S2025C, KV-S2025CU]
8.5 kg (18.7 lbs.)
[KV-S2026C, KV-S2026CU]
Power requirement
AC100
–
120 V
AC220
–
240 V
AC100
–
120 V
AC220
–
240 V
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
Power
Maximum
1 A
0.5 A
1 A
0.5 A
consumption (Scanning)
Minimum
(Standby)
0.3 A
0.2 A
0.35 A
0.2 A
Sleep mode 0.1 A (5 W)
[KV-S2025C]
0.1 A (7 W)
[KV-S2025CU]
0.1 A (8 W)
0.15 A (6 W)
0.1 A (7 W)
[KV-S2045CU]
0.1 A (8 W)
0.15 A (6 W)
[KV-S2026C]
[KV-S2026CU]
[KV-S2046CU]
Environment Operating temperature
and humidity
Temperature: 15 °C to 30 °C (59 °F to 86 °F)
Humidity: 30% to 80% RH
Storage temperature
and humidity
Temperature: 0 °C to 35 °C (32 °F to 95 °F)
Humidity: 10% to 80% RH
Accessories
Option
Power cord, Roller cleaning paper, CD-ROM(s) (Maintenance,
Safety and Installation manual, Operating instructions,
RTIV Capture software, ISIS driver, TWAIN driver,
PIE reference manual, RTIV reference manual, User utility),
Printed documents (Maintenance, Safety and Installation manual)
White roller kit (KV-SS023)
Roller exchange kit (KV-SS022)
Roller cleaning paper (KV-SS03)
White roller kit (KV-SS023)
Roller exchange kit (KV-SS022)
Roller cleaning paper (KV-SS03)
Pre-imprinter (KV-SS020)
Ink cartridge (KV-SS021)
Note
*1: The scanning speed depends on the test environment.
The scanning speed differs depending on the host computer operating environment or application.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a problem occurs while the unit is being used, check the following items and check the scanner status by User Utility.
If the unit still malfunctions, turn it OFF, unplug the power cord and call for service.
Symptom
Possible Cause
Remedy
The power cord is not plugged in.
Insert the power plug firmly.
The LED does not light when the
power switch is turned ON.
Disconnect the scanner from the
electric outlet and call for service.
Problem with power supply.
The scanner is not connected to the
computer correctly.
Connect the cables correctly.
The computer does not recognize
the scanner.
Uninstall the scanner from PC.
Register the scanner hardware
again. (Refer to the Installation
Manual on pages 22 and 23.)
The scanner is not registered
correctly.
Check your computer whether the
The computer cannot recognize the SCSI card is installed correctly
SCSI card.
using the device manager’s prop-
erty.
The same ID number is used for the Use the different SCSI ID numbers
scanner and the other device.
for each devices.
If the scanner is the last device in
the SCSI chain, set the DIP switch
of SCSI terminator to Enable.
If the scanner is not the last device
in the SCSI chain, set the DIP
switch of SCSI terminator to Dis-
able.
SCSI
connection
The terminator is not set correctly.
Turn the computer OFF. Turn the
scanner ON, and then turn the com-
puter ON again.
The scanner was turned on after
the computer was turned on.
Check the computer whether the
The USB interface of the computer USB interface of your computer is
is not installed correctly.
correctly using the device man-
ager’s property.
USB
connection
The scanner is connected via USB
hub.
Do not connect via USB hub.
The cable without High-Seed logo Use the cable with High-Speed
is used.
logo.
Scan speed is slow at USB connec- The scanner is connected with USB
tion. 1.1.
Connect with USB 2.0.
Push the ADF door release again
after you close the ADF door until it
is locked.
The ADF does not open when the The ADF door is not closed
ADF door release is pushed. properly.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Possible Cause
Remedy
The document is not loaded
properly.
Load the document correctly.
(See page 17.)
The document has been loaded on
the feed tray. But the scanner does
not start scanning.
The sensor cannot detect the docu-
ment as the edge of the document
is curled.
Flatten the document and load it
again.
Clean all of the rollers.
(See page 23.)
The rollers are dirty.
ule and the retard roller module.
(See page 27 and page 30.)
The rollers have reached their life
expectancy.
Double feeding or skewing prob-
lems occur frequently or the scan-
ner stops loading while scanning.
Flatten the document and load it
again after reducing the pages.
The document is curled or folded.
Make a copy of the document on
specified paper (see page 35) and
scan the copy.
The irregular type document is to
be scanned.
The document has a length of less Make a copy of the document on
than 70 mm (2.75z).
paper of the specified size and scan
the copy.
The document to be scanned was Load the document correctly.
The scanned document is blank.
loaded face down (upside down).
(See page 17.)
Clean the CIS glasses.
(See page 25.)
The CIS glasses are dirty.
Vertical lines appear on the
scanned document.
Clean the sensor rollers.
(See page 25.)
The sensor rollers are dirty.
Clean the CIS glasses and the
sensor rollers.
(See page 25.)
The CIS glasses or the sensor
rollers are dirty.
The scanning density is uneven.
The color of the scanned document
is extremely different from the origi- The setting of the monitor is wrong. Adjust the monitor setting.
nal document.
Clean the CIS glasses and the
Dark spots or noise appear on the The CIS glasses or the sensor
sensor rollers.
scanned documents.
rollers are dirty.
(See page 25.)
Scanned image has moire fringes It is caused by printing pattern of
such as stripe or wavy pattern the document and the congeniality
Please change the resolution and
try to scan.
noise.
of the scanning resolution.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Page
Page
A
G
ADF door . . . . . . . . . . . . . . . . . . . . . . 13, 14
ADF door release . . . . . . . . . . . . . . . . 13, 14
Green levers . . . . . . . . . . . . . . . . . . . . . . 27
I
Imprinter door pull . . . . . . . . . . . . . . . . . . 14
Interface. . . . . . . . . . . . . . . . . . . . . . . . . . 35
B
Business card guides . . . . . . . . . . 13, 14, 18
Business card stopper . . . . . . . . . 13, 14, 18
L
C
Limit mark . . . . . . . . . . . . . . . . . . . . . . . . 18
Loading documents . . . . . . . . . . . . . . . . . 17
CIS glasses. . . . . . . . . . . . . . . . . . . . . . . . 26
Cleaning the CIS glasses . . . . . . . . . . . . . 25
Cleaning the rollers. . . . . . . . . . . . . . . . . . 23
Cleaning the sensors . . . . . . . . . . . . . . . . 23
Component identification . . . . . . . . . . . . . 13
O
Operating temperature and humidity . . . . 36
Option . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
P
D
Power switch . . . . . . . . . . . . . . . . . . . 13, 14
Precautions . . . . . . . . . . . . . . . . . . . . . . . 10
Documents to avoid . . . . . . . . . . . . . . . . . 19
Drive rollers. . . . . . . . . . . . . . . . . . . . . . . . 24
E
Exit tray. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
External dimensions . . . . . . . . . . . . . . . . . 36
R
F
Resolution . . . . . . . . . . . . . . . . . . . . . . . . 35
Retard roller . . . . . . . . . . . . . . . . . . . . . . . 24
Feed tray capacity . . . . . . . . . . . . . . . . . . 35
Free rollers . . . . . . . . . . . . . . . . . . . . . . . . 24
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Page
Retard roller module . . . . . . . . . . . . . . . . . 30
Roller cleaning paper . . . . . . . . . . . 8, 23, 26
S
Scanning speed . . . . . . . . . . . . . . . . . . . . 35
Separation roller . . . . . . . . . . . . . . . . . . . . 24
Storage temperature and humidity . . . . . . 36
System requirements . . . . . . . . . . . . . . . . . 2
T
Tonal gradation. . . . . . . . . . . . . . . . . . . . . 35
Troubleshooting . . . . . . . . . . . . . . . . . . . . 37
U
User Utility . . . . . . . . . . . . . . . . . . . . . 25, 31
W
Waiting sensor . . . . . . . . . . . . . . . . . . . . . 24
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
40
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Panasonic Digital Document Company
A Unit of Matsushita Electric Corporation of America
Two Panasonic Way, Secaucus, New Jersey 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
Matsushita Electric Industrial Co., Ltd.
© 2002-2003 Panasonic Communications Co., Ltd.
E-0303M0
Download from Www.Somanuals.com. All Manuals Search And Download.
|