Owner’s Manual
Interface Unit
Model No. DMW-YAGHPP
Please read these instructions carefully before using this product,
and save this manual for future use.
If you have any questions, visit:
VQT5K48
CH0314TY0 -FJ
PP
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first! (continued)
CAUTION:
Do not lift the unit or the camera with a tripod attached.
The additional weight on the unit from the attached tripod may damage the
connection between the unit and the camera, and may result in injuries.
When a tripod is attached, always carry the equipment by the tripod.
indicates safety information.
The rating plate is on the underside of the unit.
3
(ENG) VQT5K48
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first! (continued)
FCC NOTICE (USA)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
CAUTION:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The user may find the booklet “Something About Interference” available from
FCC local regional offices helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached
installation instructions and the user must use only shielded interface cables
when connecting to host computer or peripheral devices.
Also, any unauthorized changes or modifications to this equipment could void
the user’s authority to operate this device.
indicates safety information.
4
VQT5K48 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
The unit is exclusively for Panasonic DMC-GH4 digital camera.
Mounting the unit to a digital camera allows you to output 4K, 3G-SDI, and HD-SDI compatible
video from the SDI terminal and perform video production with higher-quality video.
Two-channel audio input (XLR) is supported with audio level meters available.
You can also input an external timecode to be used as a reference signal.
yyWhen the unit is mounted on a digital camera, the electronic sound and electronic shutter
sound of the digital camera are disabled.
Contents
Read this first! ...............................................2 Additional Menus.........................................12
Accessories ...................................................7 Specifications..............................................14
Names and Functions of Components........8 Limited Warranty (ONLY FOR U.S.A.)........15
Mounting to the Digital Camera .................10
Switching the Video Output........................11
5
(ENG) VQT5K48
Download from Www.Somanuals.com. All Manuals Search And Download.
„„Handling the unit
yyThe unit is not splash proof or dust proof.
Be careful not to allow sand, dust, or water to adhere or enter into the terminal area, digital
camera, or this unit when attaching or removing this unit.
yyThis unit is not waterproof, so it cannot be used underwater.
yyDo not subject the unit to strong shocks or vibration. Doing so may result in malfunction or
damage.
yyWhen the unit is mounted on the digital camera, do not use the shoulder strap supplied with the
digital camera. Always hold both the digital camera and the unit while carrying.
yyKeep the unit away from insecticide sprays and other volatile substances.
If the unit is exposed to these sprays or substances, its external case may deteriorate and/or its
paint may come off.
yyDo not leave the unit in contact with any items made of rubber or PVC for prolonged periods of
time.
yyUnder no circumstances should the unit be used or stored in any of the following locations
since doing so may cause trouble in operation or malfunctioning:
• In direct sunlight or on a beach in summer
• In locations with high temperatures and humidity
levels or where changes in temperature and
humidity are acute
• Near heaters, air conditioners or
humidifiers
• Where there is vibration
• Inside a vehicle
• Where there is fire
yyPlease also read the manual of your digital camera.
yyPanasonic will not be liable for any direct or indirect damages or losses resulting from
operation or malfunction of this product.
yyThe design and specifications found in this document are subject to change without notice
and may differ from the actual product.
yyIf the unit’s fan stops due to a malfunction or error and you continue to operate the unit, video
output may not be performed properly.
„„Cleaning
When cleaning, wipe the unit with a dry soft cloth.
yyWhen the unit is soiled badly, it can be cleaned by wiping the dirt off with a well-wrung wet
cloth, and then with a dry cloth.
yyDo not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the
unit, since they may deteriorate the external case or the coating may come off.
yyWhen using a chemical cloth, be sure to follow the accompanying instructions.
6
VQT5K48 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
yyBe sure to dispose of the packaging materials in an appropriate manner after unpacking the
unit.
yyThe following supplied accessories come attached to the unit.
Terminal cap
Terminal cap
(electrical contacts)
(interface contacts)
7
(ENG) VQT5K48
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and Functions of Components
4
18 2
3
4
1
14 5 14
11
8
17
6
7
19
16
15 12 13 12 18
9
10
1
HDMI connection terminal
Connects to the digital camera’s HDMI
connector.
Notes on DC power supply (battery)
yyVerify that the output voltage matches the
unit’s voltage rating before connection.
yyUse a rated output current that is equal
to or higher than the unit’s input current
rating.
yyUse a shielded cable that is less than 2 m
in length for the DC cable connecting the
unit to the DC power supply (battery).
yyAn inrush current is generated when the
digital camera is turned on. An insufficient
power supply capacity when the power is
turned on may result in malfunction. We
recommend using a DC power supply
(battery) that can provide at least twice the
power consumption value of the unit.
2
3
4
5
6
Electrical contacts
Interface contacts
Camera attachment pins
Attachment screw
Screw hole (1/4-20 UNC)
Attaches to PL lens compatibility adapters,
etc.
7
HDMI terminal
HDMI Type A output terminal.
(VIERA Link is not supported.)
yyUse a high-speed double-shielded
4K-compatible HDMI cable (up to 2 m)
that is marked with the HDMI logo when
connecting to this terminal.
Verify the pin positions of the output
connector of the DC power supply
(battery) and the unit’s DC IN terminal,
and be sure to connect with the correct
polarities.
8
DC IN terminal
Connects to the DC power supply (battery:
12 V DC).
Connecting +12 V power to the GND
terminal may result in fire or malfunction.
Pin no.
1
Signal
GND
4
1
2
3
2, 3
4
—
12 V
CASE
Frame GND
8
VQT5K48 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and Functions of Components (continued)
A power supply of +48 V will be
provided to the AUDIO IN CH1 and
AUDIO IN CH2 terminals.
9
TC IN terminal (BNC)
Timecodes are input here.
Input a reference timecode to this terminal
to synchronize the digital camera’s
timecode to that of external equipment.
yyUse a 5C-FB equivalent double-shielded
cable to connect to this terminal.
13 STEREO / MONO switch
Switches the audio that is input to the
AUDIO IN CH1 and AUDIO IN CH2
terminals to stereo or monaural audio.
STEREO:
10 SDI OUT [1, 2, 3, 4] terminals (BNC)
Two-channel stereo audio.
MONO:
Monaural audio.
Terminals reserved for SDI output.
Output
Resolution setting
terminal
C4K, 4K
<1.5G-SDI Square Division>
The audio that is input to the AUDIO
IN CH1 terminal will also be input to
AUDIO IN CH2.
1 to 4
FHD (1080/59.94p, 1080/50p)
<3G-SDI>
1, 2
(same signal)
14 REC LEVEL dials
FHD (Other than the above), HD
<1.5G-SDI>
1 to 4
(same signal)
Adjust the audio inputs to the AUDIO
IN CH1 and AUDIO IN CH2 terminals
individually.
yyUse a 5C-FB equivalent double-shielded
cable to connect to this terminal.
yyWhen outputting videos that do not
include timecodes (e.g., when [Rec
Format] is set to [MP4] on the digital
camera), a timecode will not be output.
15 Level meters
Display individual indicators for the audio
input levels of the AUDIO IN CH1 and
AUDIO IN CH2 terminals.
The indicators light red when the audio
levels exceed 0 dB.
Adjust the REC LEVEL dials (14) to
prevent the audio levels from exceeding
0 dB.
11 AUDIO IN [CH1, CH2] terminals
(XLR, 3-pin)
Connects to audio equipment or
microphones.
Pin no.
Signal
GND
PUSH
1
2
3
16 Power indicator
2
1
AUDIO IN (H)
AUDIO IN (C)
Lights when the connected digital camera
is turned on.
3
17 Tripod attachment holes
Compatible with 1/4-20 UNC and 3/8-16
UNC screws.
12 LINE / MIC / +48V switches
Switch these based on the audio
equipment connected to the AUDIO IN
CH1 or AUDIO IN CH2 terminal.
LINE:
When line input audio equipment is
connected. (Input level: 0 dBu)
MIC:
Use the appropriate hole according to the
diameter of the tripod screw.
yyThe holes have a depth of 5.5 mm.
When attaching a tripod to the unit, do
not tighten the screw with excessive
force.
When an external microphone is
connected.
18 Intake vent
(Input level:
+48V:
-50 dBu)
19 Exhaust vent
When a phantom microphone (a
microphone that requires a +48 V power
supply) is connected.
9
(ENG) VQT5K48
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting to the Digital Camera
yyMake sure that a DC power supply is not connected to the unit’s DC IN terminal and that the
digital camera is turned off.
(Mounting or dismounting while the power is on may result in malfunction.)
1
Remove the cover for the battery grip connector and cover for the interface unit
connector on the digital camera, and remove the electrical contact and interface
contact caps on the unit.
yyStore the connector covers and contact caps safely to avoid loss.
yyTo protect the terminals, reattach the covers and caps after you finish using the unit.
Terminal caps
Cover for the battery grip
connector
Cover for the interface unit
connector
2
Loosen the HDMI connection terminal screw (A),
and slide the HDMI connection terminal out to the
side.
yyDo not twist or pull the HDMI connection terminal with
excessive force. Doing so may result in malfunction
or damage.
3
4
Align the attachment screw, contacts, and camera
attachment pins, and attach the digital camera.
(B)
Rotate the attachment screw (B) in the direction of
the arrow and tighten it securely.
yyVerify that the attachment screw is tightened securely
during use.
Terminal cover
5
Open the terminal cover on the digital camera, slide
the HDMI connection terminal on the unit inward
(toward the camera) to connect it, and tighten the
HDMI connection terminal screw (A) securely.
yyOpen the terminal cover on the digital camera 90
degrees, and store it in the HDMI connection terminal.
90°
(A)
„„Dismounting from the digital camera
yyMake sure that a DC power supply is not connected to the unit’s DC IN terminal and that
the digital camera is turned off, and then perform the mounting procedure in reverse order
(disconnect the HDMI connection terminal before rotating the attachment screw (B)).
Performing the procedure in the incorrect order may result in damage.
10
VQT5K48 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the Video Output
When you mount the unit on a digital camera and set the camera to playback mode, videos and
menus will not be displayed in the camera’s monitor.
Press the [Fn3] button in such cases to switch the video output destination to the digital camera
and display videos and menus in the camera’s monitor.
Press the [Fn3] button again to switch the video output destination to the unit.
[Fn3]
11
(ENG) VQT5K48
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Menus
When the unit is mounted on the digital camera, an additional menu will appear in the digital
camera’s display.
Be sure to read the digital camera’s manual together with this document.
yyMenu settings are registered to the digital camera when you turn it off.
Motion Picture
Interface Unit
Settings for the interface unit
Select the audio to input to the digital camera.
yy[BODY]:
Input audio from the digital camera’s internal microphone or from the
external microphone connected to the digital camera.
Audio Input Select yy[XLR]:
Input audio from the equipment connected to this unit’s AUDIO IN
[CH1, CH2] terminals.
When this is selected, the [Lens Noise Cut] setting will be fixed at
[OFF].
Select whether to output control information for recording start/stop to
the external equipment connected to this unit’s SDI OUT terminals.
yy[ON]: Enable the function.
SDI Remote
Recording
yy[OFF]: Disable the function.
Specify the brightness of the level meters.
yy[HIGH], [LOW]
LED Brightness
3G-SDI Type
Select the type of signal that will be used when outputting 3G-SDI
signals.
yy[LEVEL A], [LEVEL B]
Select the voltage at which to display the low battery (voltage decline)
warning for the DC power battery.
yy[11V], [12.5V], [13.5V], [15V]
Low Battery Alert The
empty.
indicator will turn red and blink before the battery charge is
Replace the battery when the battery charge is low and “Interface
Unit: Low Battery Alert” is displayed.
12
VQT5K48 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Menus (continued)
Setup
Version Disp.
Display the firmware version of the unit that is added.
In addition, some settings in the following menu items will be restricted when the unit is mounted
on the digital camera.
Setup
Motion Picture
HDMI Rec Output
TV Connection
yyHDMI Mode (Play):
yy4K Down Convert:
•When [AUTO] is selected, the output
resolution is set automatically based on the
recorded format (resolution).
•When a setting other than [AUTO] is
selected, timecodes are not superimposed
on SDI outputs.
[AUTO] cannot be selected.
yy3D Playback:
Fixed at [2D].
yyVIERA Link:
Fixed at [OFF].
13
(ENG) VQT5K48
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
„„Digital audio
Sampling frequency:
48 kHz (video sync)
Quantization:
16 bit
Power source:
DC 12 V (11 V – 17 V), 1.4 A (DC 12 V)
(including digital camera)
indicates safety information.
Headroom:
12 dB
Operating temperature:
0 °C to 40 °C (32 °F to 104 °F)
Operating humidity:
10% to 80% (non-condensing)
Weight:
„„Input / output
TC IN:
BNC1, 1.0 V [p-p] to 4.0 V [p-p], 10 kΩ
AUDIO IN:
750 g (1.65 lb)
XLR (3-pin)2, high impedance,
LINE/MIC/+48V (switchable)
LINE : 0 dBu
Dimensions (WHD):
160 mm64 mm91 mm
(6-19/64 inches2-33/64 inches
3-37/64 inches)
(excluding protrusions and HDMI connection
terminal)
MIC :
+48V: +48 V phantom supported,
SDI OUT:
-50 dBu
-50 dBu
BNC4, 0.8 V [p-p], 75 Ω,
Audio output: SDI OUT 1
Embedded audio: 2 channel
Timecode output: SDI OUT 1
Embedded LTC
„„Digital video
Resolution:
Cinema4K:
40962160 [24p]
4K (QFHD):
38402160 [29.97p]
38402160 [25p]
38402160 [24p]
38402160 [23.98p]
FHD:
HDMI:
HDMI Type A (VIERA Link not supported),
2-channel audio (linear PCM)
19201080 [59.94p] (3G-SDI Level-A/B)
19201080 [50p] (3G-SDI Level-A/B)
19201080 [59.94i]
19201080 [50i]
19201080 [24PsF]
19201080 [23.98PsF]
HD:
1280720 [59.94p]
1280720 [50p]
Sampling:
Y:Cb:Cr = 4:2:2
Bit depth:
8 bit / 10 bit
14
VQT5K48 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty (ONLY FOR U.S.A.)
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA Only)
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Corporation of North America (referred to as “the
warrantor”) will, for the length of the period indicated on the chart below, which starts
with the date of original purchase (“warranty period”), at its option either (a) repair
your product with new or refurbished parts, (b) replace it with a new or a refurbished
equivalent value product, or (c) refund your purchase price. The decision to repair,
replace or refund will be made by the warrantor.
Product or Part Name
Interface Unit
Parts
Labor
1 Year
1 Year
All included Accessories
(Except Non-Rechargeable Batteries)
90 Days
10 Days
Not Applicable
Not Applicable
Only Non-Rechargeable Batteries
During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only applies to products purchased and
serviced in the United States. This warranty is extended only to the original
purchaser of a new product which was not sold “as is”.
15
(ENG) VQT5K48
Download from Www.Somanuals.com. All Manuals Search And Download.
Mail-In Service--Online Repair Request
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
When shipping the unit, carefully pack, include all supplied accessories listed in
the Owner’s Manual, and send it prepaid, adequately insured and packed well in a
carton box. When shipping Lithium Ion batteries please visit our Web Site at
most up to date information. Include a letter detailing the complaint, a return address
and provide a daytime phone number where you can be reached. A valid registered
receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER
WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE
INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF
PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which
are caused by products not supplied by the warrantor, or failures which result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction of
sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other
business or rental use of the product, or service by anyone other than a Factory
Service Center or other Authorized Servicer, or damage that is attributable to acts of
God.
16
VQT5K48 (ENG)
Download from Www.Somanuals.com. All Manuals Search And Download.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT
OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss
of or damage to media or images, data or other memory or recorded content. The items
listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions may
not apply to you.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state. If a problem with this product develops during or after the
warranty period, you may contact your dealer or Service Center. If the problem is not
handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department
at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
Customer Services Directory (United States)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make
Customer Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States)
Purchase Parts, Accessories and Owner’s Manual online for all Panasonic
Products by visiting our Web Site at:
Or, send your request by E-mail to:
You may also contact us directly at:
1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of April 2014
17
(ENG) VQT5K48
Download from Www.Somanuals.com. All Manuals Search And Download.
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Panasonic Corporation 2014
©
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|