Panasonic Laptop CF C1 User Manual

OPERATING INSTRUCTIONS

Personal Computer

_{Model No.}CF-C1 _series

Contents

Getting Started

Introduction.................................................................

Read Me First ............................................................

(Precautions)

Description of Parts....................................................

First-time Operation..................................................

Useful Information

On-screen Manual....................................................

Handling and Maintenance.......................................

Reinstalling Software................................................

Troubleshooting

Troubleshooting (Basic)............................................

Appendix

LIMITED USE LICENSE AGREEMENT...................

Speciﬁcations ...........................................................

For further information about the com-

puter, you can refer to the on-screen

manual.

Standard Limited Warranty.......................................

To access the on-screen manual

page 21 “On-screen Manual”

ꢀ

Please read these instructions carefully before using this product, and save this manual for future use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Read Me First

Models for Europe

Declaration of Conformity (DoC)

“Hereby, Panasonic declares that this Personal Computer is in compliance with the essential require-

ments and other relevant provisions of the Directive 1999/5/EC.”

Hint:

If you want to get a copy of the original DoC of our above mentioned products, please contact our

web address: http://www.doc.panasonic.de

Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Network connection of Wired Modem.

The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area and Turkey;

- Public Switched Telephony Networks

Technical Features of Wired Modem.

The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s

Indication of the countries where WLAN is intended to be used:

AT BE BG CH CY CZ DE DK EE ES

FI FR GB GR HU IE IS IT LT LU

LV MT NL NO PL PT RO SE SI SK TR

18-25-E-1

Declaration of Conformity (DoC)

“Hereby, Panasonic declares that this Personal Computer is in compliance with the essential require-

ments and other relevant provisions of the Directive 1999/5/EC.”

Hint:

If you want to get a copy of the original DoC of our above mentioned products, please contact our web

address: http://www.doc.panasonic.de

Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Network connection of Wired Modem.

The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area and Turkey;

- Public Switched Telephony Networks

Technical Features of Wired Modem.

The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s

18-E-1

This equipment requires minimum 20 cm spacing from all person’s body (excluding extremities of hands, wrist and

feet) in directions of the back and both sides of the LCD display during wireless modes of operation.

If you use this equipment in tablet mode when utilizing the wireless functionality, it requires a minimum 5 mm spacing

from the body (excluding extremities such as hands, wrist and feet) around the left and right hand sides of the LCD dis-

play.

60-E-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Read Me First

Models for UK

Warning

This apparatus must be earthed for your safety.

To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power point which is effec-

tively earthed through the normal household wiring.

Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth.

Wrongly wired extension cords are a major cause of fatalities.

The fact that the equipment operates satisfactorily does not imply that the power point is earthed and that the installa-

tion is completely safe.

For your safety, if you have any doubt about the effective earthing of the power point, consult a qualiﬁed electrician.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 3 amp fuse is ﬁtted

in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3 amps and that it is ap-

proved by ASTA or BSI to BS 1362.

Check for the ASTA mark

or the BSI mark

on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is reﬁtted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local Panasonic Dealer.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE

SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET.

If a new plug is to be ﬁtted please observe the wiring code as shown below.

If in any doubt please consult a qualiﬁed electrician.

Warning: THIS APPLIANCE MUST BE EARTHED.

Important

The wires in this mains lead are coloured in accordance with the following code:

Green-and-yellow:

Blue:

Brown:

Earth

Neutral

Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identi-

fying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-and-YELLOW must be con-

nected to the terminal in the plug which is marked by the letter E or by the safety earth symbol

GREEN-and-YELLOW.

coloured GREEN or

The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured

BLACK.

The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured

RED.

The mains plug on this equipment must be used to disconnect the mains power.

Please ensure that a socket outlet is available near the equipment and shall be easily accessible.

How to replace the fuse

ꢁ

Open the fuse compartment with a screwdriver and replace the fuse.

Warnings

This equipment is not designed for connection to an IT power system.

ꢂ

(An IT system is a system having no direct connections between live parts and Earth; the exposed-conductive-parts

of the electrical installation are earthed.

An IT system is not permitted where the computer is directly connected to public supply systems in the U.K.)

Disconnect the mains plug from the supply socket when the computer is not in use.

ꢂ

This equipment is produced to BS800/1983.

8-E-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Safety Instructions

3. Do not use the telephone to report a gas leak in the vicinity

When using your telephone equipment, basic safety precautions

should always be followed to reduce the risk of ﬁre, electric

shock and injury to persons, including the following:

1. Do not use this product near water, for example, near a bath

tub, wash bowl, kitchen sink or laundry tub, in a wet base-

ment or near a swimming pool.

2. Avoid using a telephone (other than a cordless type) during

an electrical storm. There may be a remote risk of electric

shock from lightning.

of the leak.

4. Use only the power cord and batteries indicated in this man-

ual. Do not dispose of batteries in a ﬁre. They may explode.

Check with local codes for possible special disposal instruc-

tions.

SAVE THESE INSTRUCTIONS

19-E-1

Information to the User

This product and your Health

Using this product on board of airplanes, or

In any other environment where the risk of interference to

other devices or services is perceived or identiﬁed as harm-

ful.

ꢂ

This product, like other radio devices, emits radio frequency

electromagnetic energy. The level of energy emitted by this

product however is far much less than the electromagnetic ener-

gy emitted by wireless devices like for example mobile phones.

Because this product operates within the guidelines found in

radio frequency safety standards and recommendations, we

believe this product is safe for use by consumers. These stan-

dards and recommendations reﬂect the consensus of the sci-

entiﬁc community and result from deliberations of panels and

committees of scientists who continually review and interpret

the extensive research literature.

If you are uncertain of the policy that applies on the use of

wireless devices in a speciﬁc organization or environment (e.g.

airports), you are encouraged to ask for authorization to use this

product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interference

caused by unauthorized modiﬁcation of this product. The cor-

rection of interference caused by such unauthorized modiﬁca-

tion will be the responsibility of the user. We and its authorized

resellers or distributors are not liable for damage or violation of

government regulations that may arise from failing to comply

with these guidelines.

In some situations or environments, the use of this product may

be restricted by the proprietor of the building or responsible

representatives of the organization. These situations may for

example include:

26-M-1

Lithium Battery

Lithium Battery!

This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be ex-

changed by authorized service personnel.

Warning!

A risk of explosion from incorrect installation or misapplication may possibly occur.

15-E-1

Safety Precautions

The following safety precautions must be observed during all phases of the operation, usage, service or repair of any

Personal Computer or Handheld Computer incorporating wireless WAN modem. Manufacturers of the cellular termi-

nal are advised to convey the following safety information to users and operating personnel and to incorporate these

guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety stan-

dards of design, manufacture and intended use of the product. Panasonic assumes no liability for customer failure to

comply with these precautions.

When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal

Computer or Handheld Computer incorporating wireless WAN modem off, if instructed to do so by the guide-

lines posted in sensitive areas. Medical equipment may be sensitive to RF energy.

The operation of cardiac pacemakers, other implanted medical equipment and hearing aids can be affected

by interference from Personal Computer or Handheld Computer incorporating wireless WAN modem placed

close to the device. If in doubt about potential danger, contact the physician or the manufacturer of the device

to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Com-

puter or Handheld Computer incorporating wireless WAN modem away from the pacemaker, while it is on.

Switch off Personal Computer or Handheld Computer incorporating wireless WAN modem before boarding an

aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft

is forbidden to prevent interference with communications systems. Failure to observe these instructions may

lead to the suspension or denial of cellular services to the offender, legal action, or both.

For details on usage of this unit in aircrafts please consult and follow instruction provided by the airline.

Do not operate Personal Computer or Handheld Computer incorporating wireless WAN modem in the pres-

ence of ﬂammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel

depots, chemical plants or where blasting operations are in progress. Operation of any electrical equipment in

potentially explosive atmospheres can constitute a safety hazard.

Download from Www.Somanuals.com. All Manuals Search And Download.

Read Me First

Your Personal Computer or Handheld Computer incorporating wireless WAN modem receives and transmits

radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets,

radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off

Personal Computer or Handheld Computer incorporating wireless WAN modem wherever forbidden, or when

you suspect that it may cause interference or danger.

Road safety comes ﬁrst! Do not use a Personal Computer or Handheld Computer incorporating wireless

WAN modem while driving a vehicle. Do not place the computer with wireless WAN modem in an area where

it could cause personal injury to the driver or passengers. It is recommended to stow the unit in the boot or

secure stowage area while driving.

Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air

bag may deploy.

Air bags inﬂate with great force and if the computer with wireless WAN modem is placed in the air bag deploy-

ment area may be propelled with great force and cause serious injury to occupants of the vehicle.

IMPORTANT!

Personal Computer or Handheld Computer incorporating wireless WAN modem operate using radio signals

and cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely

solely upon any wireless device for essential communications, for example emergency calls.

Remember, in order to make or receive calls, Personal Computer or Handheld Computer incorporating wire-

less WAN modem must be switched on and in a service area with adequate cellular signal strength.

Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g.

lock functions, ﬁxed dialing etc.). You may need to deactivate those features before you can make an emer-

gency call.

Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld Com-

puter incorporating wireless WAN modem.

27-1-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

Do Not Place Containers of Liquid or Metal Objects on Top

of This Product

If water or other liquid spills, or if paper clips, coins, or foreign

matter get inside this product, ﬁre or electric shock may result.

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS

PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC

CONTROL EQUIPMENT/SYSTEMS, AIRCRAFT COCKPIT

EQUIPMENT/SYSTEMS^*1, MEDICAL DEVICES OR ACCES-

SORIES^*2, LIFE SUPPORT SYSTEMS OR OTHER EQUIP-

MENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH

ENSURING HUMAN LIFE OR SAFETY. PANASONIC WILL

NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING

FROM THE USE OF THIS PRODUCT ARISING OUT OF THE

FOREGOING USES.

If water spills in the keyboard, refer to page 23. If other foreign

matter has found its way inside, immediately turn the power

off and unplug the AC plug and remove the battery pack.

Then contact your technical support ofﬁce.

ꢃ

Do Not Disassemble This Product

The high-voltage areas inside may give you an electric shock,

or foreign matter may enter and result in a ﬁre.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2

Electrical Flight Bag (EFB) Systems and Class1 EFB Systems

when used during critical phases of ﬂight (e.g., during take-

off and landing) and/or mounted on to the aircraft. Class1 EFB

Systems and 2 EFB Systems are deﬁned by FAA: AC (Advi-

sory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance

Leaﬂets) No.36.

Keep SD Memory Cards Away from Infants and Small Chil-

dren

Accidental swallowing will result in bodily injury.

ꢃIn the event of accidental swallowing, see a doctor imme-

diately.

Do Not Place This Product on Unstable Surfaces

If balance is lost, this product may fall over or drop, resulting in

an injury.

As deﬁned by the European Medical Device Directive (MDD)

93/42/EEC.

Panasonic cannot guarantee any speciﬁcations, technologies,

reliability, safety (e.g. Flammability/Smoke/Toxicity/Radio Fre-

quency Emission, etc) requirements related to aviation standards

and medical equipment standards that differ from the speciﬁca-

tions of our COTS (Commercial-Off-The-Shelf) products.

Avoid Stacking

If balance is lost, this product may fall over or drop, resulting in

an injury.

Do Not Keep This Product Wherever There is a Lot of Water,

Moisture, Steam, Dust, Oily Vapors, etc.

If a Malfunction or Trouble Occurs, Immediately Stop Use

Otherwise, possibly resulting in a ﬁre.

If a Malfunction Occurs, Immediately Unplug the AC Plug

and the Battery Pack

Do Not Leave This Product in High Temperature Environ-

ment for a Long Period of Time

Leaving this product where it will be exposed to extremely high

temperatures such as near ﬁre or in direct sunlight may deform the

cabinet and/or cause trouble in the internal parts. Continued use in

such a resulting condition may lead to short-circuiting or insulation

defects, etc. which may in turn lead to a ﬁre or electric shocks.

This product is damaged

Foreign object inside this product

Smoke emitted

Unusual smell emitted

Unusually hot

ꢃ

Continuing to use this product while any of the above conditions

are present may result in ﬁre or electric shock.

Do Not Block the Ventilation Hole

Otherwise, heat will build up inside, possibly resulting in a ﬁre.

If a malfunction or trouble occurs, immediately turn the power

off and unplug the AC plug and remove the battery pack.

Then, contact your technical support ofﬁce for repair.

ꢃ

Hold the Plug When Unplugging the AC Plug

Pulling on the cord may damage the cord, resulting in a ﬁre or

electric shock.

Do Not Touch This Product and Cable When It Starts Thun-

dering

Electric shock may result.

Do Not Move This Product While the AC Plug Is Connected

The AC cord may be damaged, resulting in ﬁre or electric shock.

Do Not Connect the AC Adaptor to a Power Source Other

Than a Standard Household AC Outlet

Otherwise, a ﬁre due to overheating may result. Connecting to a

DC/AC converter (inverter) may damage the AC adaptor. On an

airplane, only connect the AC adaptor/charger to an AC outlet

speciﬁcally approved for such use.

If the AC cord is damaged, unplug the AC plug immediately.

ꢃ

Use Only the Speciﬁed AC Adaptor With This Product

Using an AC adaptor other than the one supplied (supplied with the

unit or one sold separately as an accessory) may result in a ﬁre.

Do Not Subject the AC Adaptor to Any Strong Impact

Using the AC adaptor after a strong impact such as being

dropped may result in electric shock, short circuit, or ﬁre.

Do Not Do Anything That May Damage the AC Cord, the AC

Plug, or the AC Adaptor

Take a Break of 10-15 Minutes Every Hour

Using this product for long periods of time may have detrimental

health effects on the eyes or hands.

Do not damage or modify the cord, place it near hot tools, bend,

twist, or pull it forcefully, place heavy objects on it, or bundle it

tightly.

Continuing to use a damaged cord may result in ﬁre, short cir-

cuit, or electric shock.

ꢃFor details on handling the cord of the AC adaptor, see

“Handling Cautions” (ꢀpage 22).

Do Not Pull or Insert the AC Plug If Your Hands Are Wet

Electric shock may result.

Do Not Turn the Volume Up To Loud When Using Headphones

Listening at high volumes that overstimulate the ear for long

periods of time may result in loss of hearing.

Do Not Connect a Telephone Line, or a Network Cable

Other Than the One Speciﬁed, into the LAN Port

If the LAN port is connected to a network such as the ones

listed below, a ﬁre or electric shock may result.

Clean Dust and Other Debris of the AC Plug Regularly

If dust or other debris accumulates on the plug, humidity, etc.

may cause a defect in the insulation, which may result in a ﬁre.

Networks other than 1000BASE-T, 100BASE-TX or

10BASE-T

ꢃ

Phone lines (IP phone (Internet Protocol Telephone), Tele-

phone lines, internal phone lines (on-premise switches),

digital public phones, etc.)

ꢃ

Pull the plug, and wipe it with a dry cloth.

Pull the plug if the computer is not being used for a long pe-

riod of time.

ꢃ

Do Not Use With Exposing the Skin To This Product For a

Long Period of Time

Using this product with exposing the skin to the heat source of

this product or AC adaptor for a long period of time can cause a

low-temperature burn.

Insert the AC Plug Completely

If the plug is not inserted completely, ﬁre due to overheating or

electric shock may result.

Do not use a damaged plug or loose AC outlet.

ꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Read Me First

ꢂThis computer is not intended for a use with connection of

medical equipment for the purpose of medical diagnosis.

ꢂPanasonic shall not be liable for loss of data or other inci-

dental or consequential damages resulting from the use of

this product.

Use the Modem with a Regular Telephone Line

Connection to an internal phone line (on-premise switches) of

a company or business ofﬁce, etc. or to a digital public phone

or use in a country or area not supported by the computer may

result in a ﬁre or electric shocks.

Interface Cable

Use of an interface cable longer than 3 m is not recommend-

Do not place the computer near a television or radio receiver.

Keep the computer away from magnets. Data stored on the

hard disk may be lost.

ꢂ

ed.

11-E-1

ꢂThis computer is not intended for the display of images for

use in medical diagnosis.

Precautions (Battery Pack)

Do Not Use With Any Other Product

Should the battery leak and the ﬂuid get into your eyes, do

not rub your eyes. Immediately ﬂush your eyes with clear

water and see a doctor for medical treatment as soon as

possible.

ꢂ

The battery pack is rechargeable and was intended for the

speciﬁed product. If it is used with a product other than the one

for which it was designed, electrolyte leakage, generation of

heat, ignition or rupture may result.

CAUTION:

Do Not Charge the Battery Using Methods Other Than

Those Speciﬁed

If the battery is not charged using one of the speciﬁed methods,

electrolyte leakage, generation of heat, ignition or rupture may

result.

Risk of Explosion if Battery is replaced by an Incorrect Type.

Dispose of Used Batteries According to the Instructions.

58-E-1

NOTE

The battery pack may become warm during recharging or

normal use. This is completely normal.

Recharging will not commence if internal temperature of the

battery pack is outside of the allowable temperature range

(0 °C to 55 °C).

Do Not Throw the Battery Pack Into a Fire or Expose It to

Excessive Heat

Generation of heat, ignition or rupture may result.

ꢂ

Avoid Extreme Heat (Near the Fire, In Direct Sunlight, for

Example)

Electrolyte leakage, generation of heat, ignition or rupture may

result.

(

ꢀ

Reference Manual “Battery Power”) Once the allow-

able range requirement is satisﬁed, charging begins auto-

matically. Note that the recharging time varies based on the

usage conditions. (Recharging takes longer than usual when

the temperature is 10 °C or below.)

In high-temperature environments, the battery takes longer

to fully recharge. In low-temperature environments, the bat-

tery takes longer to fully recharge and the operating time is

shorter. Only use the computer within the allowable temper-

ature range.

The battery pack is a consumable item. If the amount of

time the computer can be run by using a particular battery

pack becomes dramatically shorter and repeated recharging

does not restore its performance, the battery pack should be

replaced with a new one.

When transporting a spare battery inside a package, brief-

case, etc., it is recommended that it be placed in a plastic

bag so that its contacts are protected.

Do Not Insert Sharp Objects Into the Battery Pack, Expose

It to Bumps or Shocks, Disassemble, or Modify It

Electrolyte leakage, generation of heat, ignition or rupture may

result.

ꢂ

If this product is subjected to a strong impact, stop using it im-

mediately.

ꢃ

Do Not Short the Positive (+) and Negative (-) Contacts

Generation of heat, ignition or rupture may result.

ꢃDo not place the battery pack together with articles such

as necklaces or hairpins when carrying or storing.

Do Not Use This Product with a Battery Pack Other Than

the One Speciﬁed

Use only the speciﬁed battery pack (CF-VZSU66U) with your

product. Use of battery packs other than those manufactured

and supplied by Panasonic may present a safety hazard (gen-

eration of heat, ignition or rupture).

ꢂ

When the Battery Pack Has Deteriorated, Replace It with a

New One

Continued use of a damaged battery pack may result in heat

generation, ignition or battery rupture.

Always power off the computer when it is not in use. Leaving

the computer on when the AC adaptor is not connected will

exhaust the remaining battery capacity.

Do not touch the terminals on the battery pack. The battery

pack may no longer function properly if the contacts are dirty

or damaged.

ꢂ

Do not expose the battery pack to water, or allow it to be-

come wet.

If the battery pack will not be used for a long period of time (a

month or more), charge or discharge (use) the battery pack

until the remaining battery level becomes 30% to 40% and

store it in a cool, dry place.

ꢂ

This computer prevents overcharging of the battery by

recharging only when the remaining power is less than ap-

prox. 95% (when Economy Mode (ECO) is enabled: 75%) of

capacity.

The battery pack is not charged when the computer is ﬁrst

purchased. Be sure to charge it before using it for the ﬁrst

time. When the AC adaptor is connected to the computer,

charging begins automatically.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of Parts

A: Web Camera

[Properties], and then remove a check mark of [En-

able audio enhancements] in [Advanced].

To use the Web Camera, the software corresponding

to the web camera is needed.

Click [start] - [All Programs] - [SoundMAX] - [Con-

trol Panel] and select [Microphone], and then add

a check mark for [No Filtering] in [Microphone En-

hancements].

• When using a monaural microphone with a 2-termi-

nal plug:

Reference Manual “Web Camera”

ꢀ

B: LCD

ꢀ

Reference Manual “Digitizer / Multi Touch Op-

eration” “Screen Input Operation”

C: Wireless LAN Antenna

Click

(Start) - [Control Panel] - [Hardware and

Sound] - [Sound] - [Recording] - [Microphone] -

[Properties], and then add a check mark for [Enable

audio enhancements] in [Advanced].

Reference Manual “Wireless LAN”

D: Display Rotation Lock

page 11 “Rotating the Display”

ꢀ

E: Microphone Arrays

F: Function Key

Click [start] - [All Programs] - [SoundMAX] - [Con-

trol Panel] and select [Microphone], and then add

a check mark for [Voice Recording] in [Microphone

Enhancements].

Reference Manual “Key Combinations”

ꢀ

G: Keyboard

H: Touch Pad

M: Wireless WAN Antenna

N: Fingerprint Reader

Reference Manual “Using the Touch Pad”

I: Power Switch

ꢀ

page 15

ꢀ

Reference Manual “Fingerprint Reader”

O: Tablet Buttons

ꢀ

Power Indicator

• Off: Power off/Hibernation

• Green: Power on

• Blinking green:

Reference Manual “Tablet Buttons”

ꢀ

Sleep /

Standby

P: Security Lock

You can connect a Kensington cable. Refer to the

instruction manual of the cable. The security lock and

cable is a theft prevention device. Panasonic

Corporation will bear no responsibility in the event of

theft.

J: Wireless Switch

Reference Manual “Disabling / Enabling

Wireless Communication”

ꢀ

K: Headphone Jack

Q: Speaker

R: External Display Port

You can connect headphones or ampliﬁed speakers.

When they are connected, audio from the internal

speakers is not heard.

Reference Manual “External Display”

ꢀ

S: USB Port

L: Microphone Jack

Reference Manual “USB Devices”

ꢀ

A condenser microphone can be used. If other types

of microphones are used, audio input may not be pos-

sible, or malfunctions may occur.

T: PC Card Slot

Reference Manual “PC Card”

ꢀ

• When recording in stereo using a stereo microphone:

U: Smart Card Slot

Click

(Start) - [Control Panel] - [Hardware and

Sound] - [Sound] - [Recording] - [Microphone] -

Reference Manual “Smart Card”

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of Parts

Bottom

F G H

A: DC-IN Jack

B: Modem Port

M: SIM Card Slot

Open the cover and

inset a SIM card.

Reference Manual “Modem”

C: LAN Port

ꢀ

Insert the SIM card

ꢃ

into the SIM Card

Slot with the con-

tact side facing up-

ward and with the

cut corner oriented

as shown in the illustration.

Reference Manual “LAN”

ꢀ

SIM Card

D: Ventilation Hole (Exhaust)

E: USB Ports

Reference Manual “USB Devices”

ꢀ

F: SD Memory Card Slot

Reference Manual “SD/SDHC Memory Card”^*1

ꢀ

Do not insert the SIM card upside down.

G: LED Indicator

N: RAM Module Slot

Battery Status 1

Reference Manual “Battery Power”

ECO : Economy Mode (ECO) Status

ꢀ

Reference Manual “Expanding Memory”

ꢀ

O: Port Replicator Connector

Connect the Port Replicator (optional).

Reference Manual “Battery Power”

Wireless Switch Status

Caps Lock

ꢀ

Reference Manual “Port Replicator”

P: Hard Disk Drive

ꢀ

Reference Manual “Hard Disk Drive”

ꢀ

Numeric Key (NumLk)

Scroll Lock (ScrLk)

Q: Battery Pack 2

A battery bay weight saver is attached at the time of

purchase.

Battery Status 2

Reference Manual “Battery Power”

Hard disk drive status

ꢀ

page 14

ꢀ

Reference Manual “Battery Power”

ꢀ

SD/SDHC Memory Card Status^*1

R: Battery Pack 1

H: Bluetooth Antenna

page 14

ꢀ

Reference Manual “Battery Power”

ꢀ

Reference Manual “Bluetooth”

I: Tether Hook

page 13

ꢀ

S: Battery 2 Indicator

T: Battery 1 Indicator

ꢀ

Reference Manual “Battery Power”

ꢀ

J: Hand Strap

U: Battery 1 Latch

V: Battery 2 Latch

page 13 “Using the Hand Strap”

ꢀ

K: Hard Disk Drive Latch

Reference Manual “Battery Power”

SD/SDHC/SDXC Memory Cards are sup-

ꢀ

Reference Manual “Hard Disk Drive”

ꢀ

L: Pen Holder

ported.

The pen (included) is already attached to the comput-

er at purchase.

Download from Www.Somanuals.com. All Manuals Search And Download.

Rotating the Display

Switching to the Tablet Mode

ꢁ

A Open the display.

Lift up the display until it stops (approx. 90 degrees).

B Slide the Display Rotation Lock (A) to the unlocked position.

NOTE

Do not press the tablet buttons, and do not rotate the display by holding the up-

per part of the display.

ꢂ

Do not allow your ﬁngers to get caught between the display and the base when

rotating the display.

ꢂ

C Hold the bottom left and bottom right of the display, and rotate the display in the

direction of the arrow.

The lock will click as it is released.

D Rotate the display 180 degrees in the direction of the arrow while holding both

sides.

Stop rotation when the display clicks into place.

NOTE

The display cannot be rotated more than 180 degrees in the direction of the ar-

row, or in the opposite direction of the arrow. Do not attempt to rotate the display

more than 180 degrees or in the opposite direction using force.

ꢂ

Do not allow the tether for the pen (included) or other cables to get caught be-

tween the display and the base when rotating the display.

If peripheral devices connected to the computer obstruct rotation of the display,

disconnect the devices and then rotate the display.

ꢂ

E Tilt down the display in the direction of the arrow.

Download from Www.Somanuals.com. All Manuals Search And Download.

Description of Parts

Switching to the Laptop Mode

ꢁ

A Open the display.

Lift up the display until it stops (approx. 90 degrees).

NOTE

Do not press the tablet buttons, and do not rotate the display by holding the up-

per part of the display.

ꢂ

Do not allow your ﬁngers to get caught between the display and the base when

rotating the display.

ꢂ

B Hold the bottom left and bottom right of the display, and rotate the display in the

direction of the arrow.

The lock will click as it is released.

C Rotate the display 180 degrees in the direction of the arrow while holding both

sides.

Stop rotation when the display clicks into place.

NOTE

The display cannot be rotated more than 180 degrees in the direction of the ar-

row, or in the opposite direction of the arrow. Do not attempt to rotate the display

more than 180 degrees or in the opposite direction using force.

ꢂ

Do not allow the tether for the pen (included) or other cables to get caught be-

tween the display and the base when rotating the display.

If peripheral devices connected to the computer obstruct rotation of the display,

disconnect the devices and then rotate the display.

ꢂ

D Slide the Display Rotation Lock (A) to the locked position.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Using the Pen (Included)

The tether prevents the pen (included) from falling accidentally.

Attaching the pen (included) to the computer using the tether

In this section, illustrations of the digitizer pen are used as examples.

Pass one of the loops

through the hole.

C Thread the second loop on the tether through the hole D

as illustrated.

second loop

NOTE

When the pen (included) is not in use, hook the tether as illustrated.

ꢂ

Using the Hand Strap

The hand strap is convenient for computing while standing.

To carry the computer, put your hand between the computer and the hand strap

to prevent if from falling, and ﬁrmly hold the computer when using it.

NOTE

Be careful of computer drop resulting from the hand strap damage.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time Operation

Preparation

ꢁ

ACheck and identify the supplied accessories.

If you do not ﬁnd the described accessories, contact your technical support ofﬁce.

• AC Adaptor. . . . . 1

• AC Cord . . . . . . . 1

• Battery Packs . . 2

Model No: CF-AA6503A

Model No: CF-VZSU66U

• Soft Cloth. . . . . . 1

• Tether . . . . . . . . . 1

• Digitizer Pen . . . 1

• Stylus . . . . . . . . . 1

Model No: CF-VNT004AU

(

ꢀ

Reference Manual

“Digitizer / Multi Touch

Operation” “Screen input

Model No: CF-VNP017AU

Model No: CF-VNP016AU

Attached in the pen holder at purchase.

Reference Manual “Digitizer / Multi Touch Opera-

)

Operation”

(

ꢀ

)

tion” “Screen Input Operation”

• Operating Instructions (This book) . . . . . . . . . . . . . . . . . . . . . . . . . . .1

• Product Recovery DVD-ROM Windows^®7 Professional (32-bit)^*1

<For localized OS model> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

<For MUI OS model>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

• Product Recovery DVD-ROM Windows^®7 Professional (64-bit)^*1

<For localized OS model> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

<For MUI OS model>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

^*1“This disc contains 32-bit software” or similar is printed on the label.

Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging (ꢀpage 33).

④

Inserting the Battery Packs

②

ATurn over the computer.

Make sure no foreign objects are under the computer.

ꢂ

BSlide the battery pack 1 in parallel with the arrow direction until it clicks to the

secured position.

CSlide the battery latch 2, and remove the battery bay weight saver.

DInsert the battery pack 2 in the same manner as B.

③

Battery

latch 2

CAUTION

Make sure the latch is securely locked. Otherwise the battery pack may

fall when you carry the computer.

ꢂ

Do not touch the terminals of the battery pack and the computer. Doing so can

make the terminals dirty or damaged, and may cause malfunction of the battery

pack and the computer.

ꢂ

NOTE

Note that the computer consumes electricity even when the computer power is

off. If the battery pack is fully charged, the battery will fully discharged in the fol-

lowing period of time:

ꢂ

When using 2 battery packs

• In sleep /

When using 1 battery pack

• In sleep /

standby: Approx. 6 days (If “Wake Up standby: Approx. 3 days (If “Wake Up

from wired LAN” is enabled: 4 days)^*2from wired LAN” is enabled: 2 days)^*2

• In hibernation: Approx. 40 days (If

“Wake Up from wired LAN” is en-

abled: 8 days)^*2

• In hibernation: Approx. 20 days (If

“Wake Up from wired LAN” is en-

abled: 4 days)^*2

• When power is off: Approx. 40 days (If • When power is off: Approx. 20 days (If

“Power On by wired LAN” is enabled: “Power On by wired LAN” is enabled:

8 days)

4 days)

If “Wake Up from wired LAN” is disabled, the period of time will become slightly longer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the Display

AHold the side of the computer with either of your hands and then hold and lift

the (A) part to open the display.

CAUTION

Do not open the display wider than necessary (130° or more), and do not apply

excessive pressure to the LCD. Do not open or close the computer holding the

edge of the LCD segment.

ꢂ

①

Connect your computer to a power outlet.

The battery charging starts automatically.

CAUTION

Do not disconnect the AC adaptor and do not switch the wireless switch to on

until the ﬁrst-time operation procedure is completed.

When using the computer for the ﬁrst time, do not connect any peripheral device

except the battery pack and AC adaptor.

ꢂ

Handling the AC adaptor

Problems such as sudden voltage drops may arise during periods of thunder

and lightning. Since this could adversely affect your computer, an uninter-

ruptible power source (UPS) is highly recommended unless running from the

battery pack alone.

ꢃ

Turn on the computer.

ASlide and hold the power switch for approximately 1 second until the

power indicator lights.

When the power is turned on, the power indicator lights. But, in the fol-

lowing cases, the power indicator may turn off once immediately after the

power is turned on.

ꢂ

After removing the battery pack and the AC adaptor and setting them again

After sliding the power switch for four seconds or longer and turning off

the power

ꢃ

CAUTION

Do not slide the power switch repeatedly.

The computer will forcibly be turned off if you slide and hold the power switch for

4 seconds or longer.

ꢂ

Once you turn off the computer, wait for 10 seconds or more before you turn on

the computer again.

ꢂ

Do not perform the following operation until the hard disk drive indicator

turns off.

Connecting or disconnecting the AC adaptor

Sliding the power switch

Touching the keyboard, touch pad, screen, external mouse, or tablet buttons

Closing the display

ꢃ

Any changes from the default setting of the Setup Utility must not be made until

the First-time Operation is completed.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time Operation

Setup Windows.

Follow the on-screen instructions.

The computer restarts several times. Do not touch the keyboard or touch

ꢂ

pad, and wait until the hard disk drive indicator

has turned off.

After the computer is turned on, the screen remains black or unchanged for

a while. This is not a malfunction. Wait for a moment until the Windows setup

screen appears.

ꢂ

During setup of Windows, use the touch pad and clicking to move the cursor

and to click an item.

Setup of Windows will take approximately 20 minutes.

Go to the next step, conﬁrming each message on the display.

“Join a wireless network” screen may not appear.

ꢂ

You can set the Wireless Network after the setup of Windows is complete.

Select language on “Setup Windows” screen and click [Next].

Carefully choose your language because you cannot change it later. If you

ꢂ

set a wrong language, you need to reinstall Windows ( page 26).

ꢀ

For some languages, the characters on the key and inputted character may

not match. Set the keyboard properly after the setup is complete. Then set

the password.

ꢂ

CAUTION

You can change the user name, password, image and security setting after

setup of Windows.

Remember your password. If you forget the password, you cannot use the Win-

dows. Creating a password reset disk beforehand is recommended.

After setup of Windows, keyboard operations may not work correctly depending

on the type of keyboard. If this occurs, refer to “Troubleshooting (Basic)”

ꢂ

(

ꢀ

page 32).

Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL,

COM1 to COM9, LPT1 to .LPT9, @. In particular, if you create a user name

(account name) that includes the “@” mark, a password will be requested at the

log-on screen, even if no password has been set. If you try to log on without en-

tering a password, “The user name or password is incorrect.” may be displayed

ꢂ

and you will not be able to log on to Windows ( page 30).

ꢀ

Use standard characters as a computer name: numbers 0 through 9, uppercase

and lowercase letters from A to Z, and the hyphen (-) character.

If the error message “The computer name is not valid” appears, check if charac-

ters other than the above are not entered. If the error message still remains on

the display, set the key entry mode to English (“EN”) and enter characters.

When setting up the keyboard, choose the appropriate one to your computer.

Otherwise, input by the keyboard may become unavailable.

ꢂ

The input panel is displayed on “Welcome to the Windows XP Setup Wizard”.

Move “Welcome to the Windows XP Setup Wizard” and make sure that the

“Welcome to the Windows XP Setup Wizard” and the input panel do not overlap.

You cannot choose the following words for user name and password: CON,

PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.

When you set date/time/time zone and click [Next], the screen may not go to the

next step for a few minutes. Do not touch the keyboard or touch pad, and wait

until the screen changes.

ꢂ

If “An unexpected error has occurred ...” (or a similar message) is displayed,

click [OK]. This is not a malfunction.

ꢂ

The keyboard will operate as the US keyboard until the keyboard setting is

changed. Because of this, some alphabets shown on display may differ from

inputted ones.

ꢂ

To avoid the accidental selections, during setting up Windows,

Use the touch pad to make some selections.

ꢃ

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the NumLock key and input in the Ten-key mode to input numbers.

ꢃ

To match the languages, change the language settings after setting up Windows

ꢂ

(

below). Do not change the settings in [To change system or these settings,

ꢀ

click Customize] of [Regional and Language Options] during setting up Windows.

Install Adobe Reader.

Install Adobe Reader to read the Important Tips and the Reference Manual.

A Click

(Start) and input the following in [Search programs and ﬁles], then

press

Enter

A Click [start] - [Run], input the following, then click [OK].

[c:\util\reader\**\setup.exe]

“**” depends on the language.

ꢃ

English : m

Chinese (Traditional) : tc

Dutch : nl

German : g

Italian : t

Arabic : ar

Bulgarian : bg Chinese (Simpliﬁed) : sc

Croatian : yx

Finnish : ﬁ

Czech : cs

French : f

Hungarian : hu

Latvian : lv

Danish : da

Estonian : et

Greek : el

Japanese : ja

Hebrew : he

Korean : ko

Lithuanian : lt Norwegian : no Polish : pl

Portuguese : pt

Slovenian : sl

Romanian : ro Russian : ru

Slovak : sk

Turkish : tr

Spanish : p

Swedish : s

Ukrainian :uk

Change the language settings.

·English

·Chinese (Traditional)

·Estonian

·Hungarian

·Arabic

·Bulgarian

·Croatian

·French

·Chinese (Simpliﬁed)

·Czech

·Danish

·Greek

·Latvian

·Dutch

·Hebrew

·Lithuanian

·Finnish

·Italian

·German

·Korean

·Japanese

·Norwegian ·Polish

·Portuguese ·Portuguese (Brazilian) ·Romanian

·Slovenian ·Spanish ·Swedish ·Thai

·Russian

·Turkish

·Slovak

Change the language settings in the following menu.

[start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Regional

and Language Options]

[Regional Options] - [Standards and Formats]

[Languages] - [Language used in menus and dialogs]

[Languages] - [Details] - [Default input language]

[Advanced] - [Language for non-unicode Programs]

ꢃ

NOTE

When you use MUI OS and localized OS versions together on the same net-

ꢂ

work, use English computer names on localized versions of Windows.

Some UI (User Interface) strings remain in English even if the user’s UI is set to

another language.

ꢂ

For further information, refer to “c:\windows\mui\relnotes.txt”.

If you change the language in [Languages] - [Language used in menus and dia-

logs], the desktop color will be changed when logging on to Windows next time.

The desktop color can be changed by following the procedure below.

Click [start] - [Control Panel] - [Appearance and Themes] - [Display] - [Desktop]

and select color from [Color], then click [OK].

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time Operation

Perform the screen calibration.

NOTE

Perform the following calibration for each user.

Rotate the display to primary landscape before performing the calibration.

ꢂ

Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].

BClick [Calibrate].

CClick [Pen input].

DIf [User Account Control] is displayed, click [Yes].

EUsing the digitizer pen, touch each of the “+” target marks one by one, and

then click [OK].

FRepeat steps Aand B.

GClick [Touch input].

HIf [User Account Control] is displayed, click [Yes].

Using the ﬁnger, touch each of the “+” target marks one by one, and then click [Yes].

AClick [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and

Pen Settings].

BClick [Calibrate…].

CClick [Pen].

DUsing the digitizer pen, touch each of the “+” target marks one by one and

then click [OK].

ERepeat steps Aand B.

FClick [Touch].

GUsing the ﬁnger, touch each of the “+” target marks one by one, and then

click [Finished].

Click

(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].

BClick [Calibrate].

CIf [User Account Control] is displayed, click [Yes].

DUsing the stylus, touch each of the “+” target marks one by one, and then

click [Yes].

AClick [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and

Pen Settings].

BSet the following with [Calibrate] in [Settings].

CUsing the stylus, touch each of the “+” target marks one by one, and then

click [Yes].

Create a new account.

Click [start] - [Control Panel] - [User Accounts] - [Create a new account].

CAUTION

Remember your password. If you forget the password, you cannot use the Win-

dows operating system. Creating a password reset disk beforehand is recom-

mended.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTE

PC Information Viewer

ꢂ

This computer periodically records the management information of the hard disk, etc. The maximum data volume for each

record is 1024 bytes.

This information is only used for estimating the cause in the case when the hard disk goes down by any possibility. They

are never sent to outside via network nor used for any other purpose except for the purpose described the above.

To disable the function, add the check mark for [Disable the automatic save function for management information history]

in [Hard Disk Status] of PC Information Viewer, and click [OK]. When you disable the function, information on how to use

the hard disk of PC Information Popup is not displayed.

(

Reference Manual “Check the Computer’s Usage Status”)

ꢀ

To conserve power, the following power saving methods are set at the time of purchase. (When AC adaptor

is connected)

ꢂ

The screen automatically turns off after 15 minutes of inactivity.

ꢃ

The computer automatically enters

sleep^*3/

standby^*3after 20 minutes of inactivity.

^*3Refer to

Reference Manual “Sleep/Standby or Hibernation Functions” about resuming from sleep/standby.

Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.3 ) simply by

having the AC adaptor plugged into an AC outlet. (When using with 240 AC)

Precaution against Starting Up/Shutting Down

ꢁ

ꢂ

Do not do the following

Connecting or disconnecting the AC adaptor

Sliding the power switch

Touching the keyboard, touch pad, screen, external mouse, or tablet buttons

Closing the display

ꢃ

Turn on/off the wireless switch

About the battery for this computer

ꢁ

The computer has 2 battery packs. If one of the two battery packs has remaining power, you can replace the other bat-

tery pack without turning off the computer ( Reference Manual “Battery Power”).

ꢀ

Power is consumed only on either battery pack. Charging is made for the two battery packs at the same time.

With the battery charger (optional: CF-VCBC11U), you can remove the empty battery pack from the computer and

charge it while using the computer.

Note about access to the hard disk

ꢁ

Languages other than the one selected at Windows Setup are uninstalled in the background while the computer stays

idle.

During this period of time, the following issues may occur. These are caused by the speciﬁcations of Windows 7 and

are not a malfunction.

The uninstall process may continue for approximately 3 hours, during which time the computer may become un-

responsive due to a continuous access to the hard disk, etc. You can restart or shutdown the computer during the

process.

ꢃ

The message “Conﬁguring Windows features, preparing to conﬁgure Windows” may appear for up to about 20 min-

utes when shutting down or starting up the computer (including restart). Wait for the computer to shut down or start

up normally.

ꢃ

Once the message is no longer displayed, follow the steps below to delete all but the most recent restore point. If you

do not delete the restore points, the system ﬁles for languages other than the one selected will remain on the disk as

backup data for the restore points, and the operation of the computer may become unresponsive.

A Click

(Start). And input “cleanmgr.exe” in [Search programs and ﬁles], and then, in the list of results, click

[cleanmgr.exe].

B After a while, the “Disk Clean up for” setting screen appears.

Click [Clean up system ﬁles] - [More Options] - [System Restore and Shadow Copies] - [Clean up] - [Delete] - [OK]

- [Delete Files].

C Restart the computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time Operation

To change the partition structure

ꢁ

You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new parti-

tion. This computer has a single partition as default setting.

A Click

(Start) and right-click [Computer], then click [Manage].

A standard user needs to enter an administrator password.

ꢂ

B Click [Disk Management].

C Right-click the partition for Windows (“c” drive in the default setting), and click [Shrink Volume].

The partition size depends on the computer speciﬁcations.

ꢂ

D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].

You cannot input a larger number than the displayed size.

To select [Reinstall to the ﬁrst 2 partitions.] in reinstalling Windows 7 ( page 26), 30000

ꢂ

MB^*4

or more is

ꢀ

necessary for [Total size after shrink in MB].

E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume].

F Follow the on-screen instructions to make the settings, and click [Finish].

Wait until formatting is completed.

For MUI OS model, 60000

or more is necessary.

NOTE

You can create an additional partition using remaining unallocated space or newly creating unallocated space.

To delete a partition, right-click the partition and click [Delete Volume] in step C.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

On-screen Manual

You can access the Reference Manual and the Important Tips on the computer screen.

When you access the Reference Manual and the Important Tips for the ﬁrst time, the License Agreement of the Adobe

Reader may be displayed. Read it carefully and select [Accept] to proceed.

Reference Manual

ꢁ

The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.

To access the Reference Manual:

Double-click

on the desktop.

Alternatively click

(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Reference Manual].

ꢂ

Click [start] - [Reference Manual].

Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Reference Manual].

NOTE

The Windows ﬁles included in the Windows 7 DVD-ROM are contained in the following folders:

c:\windows\support\migwiz, .c:\windows\support\tools, .c:\windows\support\logging

Some languages are not available depending on the model.

c:\windows\support\**\migwiz, .c:\windows\support\**\tools, .c:\windows\support\**\logging

• “**” depends on the language.

ꢂ

English : en

German : de

Spanish : es

Bulgarian : bg Chinese-Hong Kong : b3

Croatian : yx

Greek : el

Dutch : nl

Italian : it

Swedish : sv

Finnish : ﬁ

Norwegian : no Russian : ru

Turkish : tr

French : fr

Arabic : ar

Chinese-Simpliﬁed : xt

Estonian : et

Czech : cs

Hebrew : iw

Latvian : lv

Danish : da

Hungarian : hu Japanese : jp

Lithuanian : lt

Korean : ko

Polish : pl

Portuguese : pt Portuguese (Brazilian) : xc

Romanian : ro Serbian : st

Ukrainian : uk

Slovak : sk

Slovenian : sl

Thai : th

Important Tips

ꢁ

The Important Tips will provide you with the battery information so that you can use the battery pack in the optimum

condition to obtain longer operation time.

To access the Important Tips:

Double-click

on the desktop.

Alternatively click

(Start) - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].

ꢂ

Double-click

on the desktop.

Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].

NOTE

When Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure and update.

See http://www.adobe.com/ for the latest version of Adobe Reader.

ꢂ

Supplementary information on Camera Utility

ꢁ

Mirroring

ꢂ

The mirroring is not available when Windows Aero is disabled.

Assigning the Zoom In/Take Photo Functions to the Tablet Button

If “The ﬁle path you speciﬁed does not exist…” appears, the ﬁle path speciﬁed for [Program Location] in the [Tablet

Button Actions] screen may not be correct, or the double quotation mark (“) may be missing.

Click [OK] and conﬁrm the [Tablet Button Actions] screen.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Handling and Maintenance

Operation Environment

Place the computer on a ﬂat stable surface. Do not place the computer upright. If the computer is exposed to an ex-

ꢂ

tremely strong impact, it may become inoperable.

Temperature: Operation : 5 ° to 35 °

ꢂ

Storage : -20 ° to 60 °

Humidity:

Operation : 30 to 80 RH (No condensation)

Storage : 30 to 90 RH (No condensation)

Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in

the product deterioration and will shorten the product life.

Be sure to use the computer in an environment with sufﬁcient heat ventilation.

Avoid using the computer on a highly heat retentive surfaces (e.g., rubber pads and blankets). If possible, use the

computer on surfaces that can dissipate heat, such as a steel desk.

ꢃ

Do not cover the computer with towels, keyboard covers, etc., as this prevents heat dissipation.

ꢃ

Do not place the computer in the following areas, otherwise the computer may be damaged.

ꢂ

Near electronic equipment. Image distortion or noise may occur.

In extremely high or low temperature.

ꢃ

As the computer can become hot during operation, keep it away from items that are sensitive to heat.

Handling Cautions

When using the computer

ꢁ

ꢂ

Do not block the ventilation hole.

When carrying the computer

ꢁ

ꢂ

This computer is designed to minimize shock to parts such as the LCD and the hard disk drive and equipped with a

drip-proof keyboard, but no warranty is provided against any trouble caused by shock. Be extremely careful when

handling the computer.

Turn off the computer.

ꢂ

Remove all external devices, cables, PC

Cards and other protruding objects.

Do not drop or hit the computer against solid

objects.

ꢂ

Do not leave the display open.

ꢂ

Do not grip the display part and area of tablet buttons.

When you carry the AC adaptor with the cord rolled up,

roll it up as shown in (A).

Do not roll up the cord in the opposite direction or crossed

direction as shown in (B).

(A)

(B)

Be sure not to roll up the cord around the AC adaptor in

use.

ꢃ

Pull out the AC cord. Also, do not roll up the AC cord.

ꢃ

Do not carry the computer in the tablet mode.

Do not put anything (e.g., a piece of paper) between the

display and keyboard.

ꢂ

When you board an airplane, take the computer with you and never put it in your

checked luggage. When using the computer on airplane, follow the airline’s instructions.

This computer contains a magnet and magnetic products at the locations circled in

the illustration at the right. Avoid leaving metallic object or magnetic media in con-

tact with these areas.

ꢂ

Be careful not to get injured by dropping or getting hit when carrying the computer.

When carrying a spare battery, put it in a plastic bag to protect its terminals.

ꢂ

When using the Touch Pad

ꢁ

ꢂ

The touch pad is designed to be used by ﬁnger tip. Do not place any object on its

surface and do not press down strongly with sharp-pointed or hard objects that may

leave marks (e.g., nails, pencils and ball point pens).

Be careful of computer drop resulting from the hand strap damage.

Avoid any harmful substances such as oil from getting into the touch pad. The cursor may not work correctly.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

When using the digitizer/touchscreen

ꢁ

ꢂ

Use the pen (included) with the computer. Do not use pencils, implements with sharp tips or hard objects for screen

operations. The screen may be damaged as a result.

Do not place any object on the surface or press down forcefully with sharp-pointed objects (e.g., nails), or hard ob-

jects that can leave marks (e.g., pencils and ball point pens).

ꢂ

Do not apply pressure to the perimeter of the display panel. The cursor may move to the edge of the display.

Do not operate the computer when such things as dust are on the screen. Do not allow contact with substances

that could dirty the screen, such as oil.

ꢂ

Do not apply too much pressure when operating the screen. Only a light touch is required to operate the screen.

Applying too much pressure may damage the surface.

When the screen becomes dirty, use the Soft Cloth (included) with the computer. (For more information, refer to

Reference Manual “Suggestions About Cleaning the LCD Surface”.)

Do not touch the screen outside of the LCD display area. The screen input area is deﬁned by the LCD display

ꢂ

screen. Touching the screen outside of the display area may result malfunctions or damage to the screen.

The screen uses electromagnetic induction and may not work properly near strong electrical ﬁeld or magnetic ﬁeld

ꢂ

such as:

Near AM radio base station or relay station antennas

Near CRT displays that generate strong electromagnetic ﬁeld noise

Move the screen away from such locations so it will work properly.

ꢃ

The cursor cannot follow the digitizer pen or ﬁnger movement if you move the digitizer pen or ﬁnger too quickly.

ꢂ

If the computer becomes warm during usage

ꢁ

ꢂ

Check the following

If you are not using a wireless LAN, turn the wireless LAN off.

ꢃ

If the computer becomes warm while the screen saver is displayed, set the screen saver to [Windows XP].

Screen savers that use 3-D images or other complex images increase the CPU utilization rate.

Use recommended RAM module products. Non-recommended RAM modules may not operate properly, and may

cause damage to your computer.

ꢃ

ꢂ

Click

on the notiﬁcation area and click . Then select [Panasonic Power management (Better Heat Dispersion)].

When changing to [Panasonic Power management (Better Heat Dispersion)], the following settings will change.

– Change to [High Speed] from [Standard] in [Fan control mode].

Rotation of the cooling fan speeds fast and the computer can be cooled down. Note that the battery operating

time will be shorter.

ꢃ

– Switch the screen saver to [Prohibited].

When you do not frequently use CPU or the rotation noise of the fan bothers you, set [Standard] or [Low Speed]

in [Fan control mode].

ꢃ

AClick

BSelect [Standard] or [Low Speed] in [Fan control mode].

Reference Manual “Customizing the Power Setting”

on the notiﬁcation area and click

ꢀ

ꢂ

ꢁ

Double-click

on the desktop and click [High speed], then click [OK].

When you set [High speed], rotation of the cooling fan speeds up and the computer can be cooled down. Note

ꢃ

that the battery operating time will be shorter.

When you do not frequently use CPU or the rotation noise of the fan bothers you, set [Standard] or [Low speed]

as necessary.

ꢃ

When using peripheral devices

Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction

manuals of the peripheral devices.

Use the peripheral devices conforming to the computer’s speciﬁcations.

Connect to the connectors in the correct direction.

If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.

If screws are included, fasten them securely.

ꢂ

Remove the cables when you carry the computer. Do not pull the cables forcibly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Handling and Maintenance

Preventing your computer from unauthorized use via wireless LAN/Bluetooth/wireless WAN

ꢁ

Before using wireless LAN/Bluetooth/wireless WAN, make the appropriate security settings such as data encryption.

ꢂ

When the battery indicator does not light on

ꢁ

The AC adaptor’s protection function may be working when the battery indicator does not light on even if the AC adap-

tor and the battery pack are correctly connected with the computer.

Pull out the AC cord and wait for more than 1 minute to reconnect the AC cord.

If the problem persists, contact your technical support ofﬁce.

ꢂ

Maintenance

To clean the LCD panel

Use the Soft Cloth (included) with the computer. (For more information, refer to

About Cleaning the LCD Surface”.)

Reference Manual “Suggestions

Cleaning the display while the power is on may cause the computer to malfunction. Also, dirt on the screen is easier to

see when the computer is powered off, and so is easier to clean.

To clean the touch pad

Wipe lightly with a gauze or other dry, soft cloth.

To clean areas other than the LCD panel and touch pad

Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty

area gently. Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect

painted surfaces.

CAUTION

Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.

Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to

the surface.

ꢂ

Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause

malfunction or damage.

ꢂ

When Using the Computer with a Reduced Resolution

When setting the screen resolution to a resolution below the LCD’s resolution, the images appearing on the screen will

be stretched. As a result, the characters displayed may appear blurred. This is normal, and not indicative of a malfunc-

tion.

To display large characters with no blurring

Try the following steps while keeping the LCD in its resolution.

Click

(Start) - [Control Panel] - [Appearance and Personalization] - [Display], select except for

ꢂ

[Smaller - 100%] and then click [Apply].

(This function will be enabled after logging off the computer.)

To display enlarged font sizes in applications such as Internet Explorer:

Use the display enlargement function provided by the speciﬁc software application.

To display enlarged desktop icons, title bar and cursor or magnify the speciﬁc part of the screen:

ꢂ

Use

“Icon Enlarger” or “Loupe Utility”.

Download from Www.Somanuals.com. All Manuals Search And Download.

If You Spill Water on the Keyboard

Note that repairs resulting from liquids being spilled on the computer are not free of charge, and not covered by war-

ranty.

The keyboard on this computer incorporate a drain system (a moisture protection mechanism) that minimizes the

amount of liquid reaching the inside of the computer even if water is spilled on the keyboard.

Any water that comes in contact with the keyboard is drained off through holes in the bottom of the computer, so that

virtually no water is left inside the computer. However, this is not a guarantee against damage to the hard disk or other

internal parts, or against the loss or deletion of data.

The drain system is incorporated into only the keyboard. It does not apply to any other components.

If you spill water or any other liquid on the keyboard, even a small amount, be sure to perform the following steps.

Failure to perform these steps may result in damage to the computer. The drain system will not provide complete

protection against water entering the computer.

ꢂ

Immediately turn off the computer, and remove the AC adaptor.

Wipe any water droplets off of the top of the keyboard using a

soft, dry cloth.

Slowly lift up the computer, keeping it

level,

and wipe any water coming out of the

holes on the bottom using a soft, dry

cloth.

If the computer is tilted during this step, liquid may seep

inside the computer resulting in damage.

Keeping the computer level, move

the computer to a dry place.

If the computer is placed back on the wet sur-

face, water may seep inside the computer from

the bottom.

Remove the battery pack.

Be sure to contact your technical support ofﬁce to have the computer checked for any

malfunctions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Reinstalling Software

Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk

data will be erased.

Back up important data to other media or an external hard disk before reinstallation.

CAUTION

Hard disk

Partition with boot files

Area usable by Windows

Do not delete the partition with boot ﬁles on the hard disk.

The disk space in the partition is not available to store data.

Preparation

Prepare the following items:

ꢂ

The Product Recovery DVD-ROM (included)

ꢃ

CD/DVD drive (optional: Refer to recent catalogs and other sources for information about the products

available) or port replicator (optional: CF-VEBC11U)

ꢃ

Remove all peripherals (except for the CD/DVD drive and port replicator).

Connect the AC adaptor and do not remove it until reinstallation is complete.

ꢂ

NOTE

For German, Swiss German, Romanian, Polish, Czech, Hungarian, and Slovenian keyboards, press when you

ꢂ

need to press

For Turkish keyboard, press when you need to press

ꢂ

Turn off the computer and connect CD-DVD drive or port replicator to the computer.

Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.

ꢂ

Write down all of the contents of the Setup Utility and press F9.

At the conﬁrmation message, select [Yes] and press

Enter

Press F10

At the conﬁrmation message, select [Yes] and press

Enter

Computer will restart.

Press F2 or Del while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.

ꢂ

Set the Product Recovery DVD-ROM for Windows which you install into the CD/DVD

drive or port replicator.

Select the [Exit] menu.

When using CD/DVD drive:

Select your CD/DVD drive in [Boot Override] and press

Enter

When using port replicator:

Select [P1: TEAC XXXXX] in [Boot Override] and press

The computer will restart.

Enter

Click [Reinstall Windows] and click [Next].

The License Agreement screen appears.

10 Click [Yes, I agree to the provisions above and wish to continue!] and click [Next].

11 When reinstalling Windows 7 installed in the hard disk from Windows 7:

Select the settings and click [Next].

[Reinstall Windows to the whole Hard Disk to factory default.]

You will have two partitions.

ꢂ

[Reinstall to the ﬁrst 2 partitions.]^*1

ꢂ

Select this option when the hard disk has already been divided into several partitions. For how to create a

new partition, refer to “To change the partition structure” ( page 18).

ꢀ

You can keep the partition structure.

^*1This does not appear if Windows cannot be reinstalled to the partition containing boot ﬁles and the area us-

able by Windows.

When reinstalling Windows 7 installed in the hard disk from Windows XP:

Click [Next].

Download from Www.Somanuals.com. All Manuals Search And Download.

12 At the conﬁrmation message, click [YES].

Reinstallation starts according to the instructions on the screen. (It will take approximately 30 - 80 minutes.)

Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may become

unavailable as Windows may not start up or the data may be corrupted.

ꢂ

According to the instruction on the screen, switch Product Recovery DVD-ROM.

ꢂ

13 Remove the Product Recovery DVD-ROM, and then click [OK] to turn off the computer.

14 Turn on the computer.

If the password is requested, enter the Supervisor Password.

ꢂ

15 Perform the “First-time Operation” ( page 15).

ꢀ

16 Start the Setup Utility and change the settings as necessary.

17 Perform Windows Update.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Basic)

Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the

“Reference Manual”. For a software problem, refer to the software’s instruction manual. If the problem persists, contact

your technical support ofﬁce. You can also check the computer’s status in the PC Information Viewer (

Refer-

ꢀ

ence Manual “Check the Computer’s Usage Status”).

Starting Up and Sleep/Standby and Hibernation Mode

ꢁ

Connect the AC adaptor.

Insert a fully charged battery.

Remove the battery pack and the AC adaptor, then connect them again.

If an additional RAM module has been inserted, remove the RAM module and check to

see if the RAM module is the recommended one.

ꢂ

The computer does not

power on / The power indi-

cator or battery indicator is

not lit.

When the CPU temperature is high, the computer may not start up to prevent overheat-

ing of the CPU. Wait until the computer cools down, and then turn the power on again. If

the computer does not power on even after cooling down, contact your technical support

ofﬁce.

ꢂ

Remove all peripheral devices (e.g. USB memory).

If the power indicator is lit, slide the power switch for four seconds or longer to turn off,

then turn on again.

ꢂ

Windows does not start up.

Using the following procedure, start up in Safe Mode, and check the error details.

A Turn on the computer, and when the [Panasonic] boot screen disappears (after en-

ꢂ

tering the password^*1if one is set) hold down

B Release your ﬁnger when [Windows Advanced Options Menu] is displayed, and with

ꢄ

or , select [Safe Mode], then press

Enter

ꢅ

Follow the on-screen instructions.

Supervisor Password or User Password set with the Setup Utility

Press in the Setup Utility to return the Setup Utility settings (excluding the pass-

ꢂ

words) to the default values. Start the Setup Utility and make the settings again.

Turn off the computer and remove the RAM module, then conﬁrm whether the RAM

module has compliant to speciﬁcation. When the RAM module has conformed to speciﬁ-

cation, install it again.

ꢂ

After adding or changing

the RAM module, the power

is turned on but nothing is

displayed on the screen.

Supervisor Password or User Password: Contact your technical support ofﬁce.

Administrator password:

ꢂ

You have forgotten the pass-

word.

If you have another account with Administrator authority, log-on with it, then delete the

password for the problem account.

If you have a password reset disk, click [Reset password] displayed after the pass-

word input error, then follow the on-screen instructions to set a new password.

ꢃ

If you have a password reset disk, you can reset the administrator password. Set the

disk and enter any wrong password, then follow the on-screen instructions and set a

new password.

ꢃ

If you cannot do either of the above, you will need to reinstall ( page 26) and setup Win-

ꢀ

dows.

A ﬂoppy disk is in the ﬂoppy disk drive and it does not contain system startup informa-

tion. Remove the ﬂoppy disk and press any key.

This message may appear with some devices connected to the USB port. Remove the

device or set [Legacy USB Support] to [Disabled] in the [Advanced] menu of the Setup

Utility.

ꢂ

“Remove disks or other

media. Press any key to

restart” or a similar message

appears.

ꢂ

If the problem persists after removing the disk, it may be a hard disk failure. Perform the

ꢂ

reinstallation and return the hard disk to its condition at the time of purchase ( page 26).

ꢀ

If the problem persists even after the reinstallation, contact your technical support ofﬁce.

Make the correct settings.

The date and time are incor-

rect.

Click

and Time].

- [Control Panel] - [Clock, Language, and Region] - [Date

(Start)

Click [start] - [Control Panel] - [Date, Time, Language, and Regional

Options] - [Date and Time].

If the problem persists, the internal clock battery may need to be replaced. Contact your

technical support ofﬁce.

ꢂ

When the computer is connected to LAN, check the date and time of the server.

The 2100 A.D. or later year will not be correctly recognized on this computer.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting Up and Sleep/Standby and Hibernation Mode

ꢁ

The Battery Recalibration was canceled before Windows was shut down last time. To

start up Windows, turn off the computer by the power switch, and then turn on.

ꢂ

[Executing Battery Recali-

bration] screen appears.

If you connect to a network using wireless LAN function, perform access point settings.

ꢂ

The computer will not auto-

matically enter

(

Reference Manual “Wireless LAN”)

ꢀ

If you do not use wireless LAN function, turn off wireless LAN function. (

Refer-

ꢀ

sleep /

stand-

ence Manual “Disabling/Enabling Wireless Communication”)

Make sure that you are not using any software that regularly accesses the hard disk.

by or hibernation.

ꢂ

Select [Enabled] in [Password On Resume] in the [Security] menu of the Setup Utility

[Enter Password] does not

appear when resuming from

sleep /

(

ꢀ

Reference Manual “Setup Utility”).

The Windows password can be used instead of the password set in the Setup Utility.

ꢂ

standby or

A Click

(Start) - [Control Panel] - [User Accounts and Family Safety] - [Add or re-

hibernation.

move user accounts] and select the account, and set the password.

B Click

(Start) - [Control Panel] - [System and Security] - [Power Options] - [Require

a password on wakeup] and a check mark for [Require a password].

A Click [start] - [Control Panel] - [User Accounts] and select the account, ant set the

password.

B Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Option] -

[Advanced] and a check mark for [Prompt for password when computer resumes

from standby].

Perform the following steps to change the audio settings to prevent audio output.

ꢂ

When logging on (e.g., re-

suming the computer), audio

is distorted.

A Right-click the desktop and click [Personalize] - [Sounds].

B Remove the check mark from [Play Windows Startup sound], and click [OK].

A Click [start] - [Control Panel] - [Sounds, Speech, and Audio Devices] - [Sounds and

Audio Devices], and click [Sounds].

B Set [Windows Logon] and [Windows Logoff] to [(None)].

One of the following operations may have been carried out.

ꢂ

Cannot resume.

sleep/

standby mode, the AC adaptor or battery pack

ꢃ

was disconnected, or a peripheral was connected or disconnected.

The power switch was slid for four seconds or longer to forcibly turn off the computer.

ꢃ

Slide the power switch to turn on the computer. Data not saved will be lost.

Check to see if there was a disk error.

Other startup problems.

A Remove all peripheral devices including an external display.

Click

(Start) - [Computer] and right-click [Local Disk (C:)], and click [Properties].

Click [start] - [My Computer] and right-click [Local Disk (C:)], and click [Properties].

C Click [Tools] - [Check Now…].

A standard user needs to enter an administrator password.

ꢃ

D Select the option in [Check disk options] and click [Start].

Click [Schedule disk check] and restart the computer.

Start the computer in Safe Mode and check the error details. ( page 28 “Windows

ꢂ

ꢀ

does not start up”.)

Shutting Down

ꢁ

Remove all peripheral devices.

Wait one or two minutes. It is not a malfunction.

ꢂ

Windows does not shut

down.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Basic)

Password

ꢁ

Even after entering the pass-

word, a message appears

requesting to type it again.

lights up, press

to disable the ten-key mode, and then input.

NumLk

to disable the Caps Lock mode, and then input.

Caps Lock

ꢂ

The user name (account name) includes the “@” mark.

If another user account name exists:

Log on to Windows using another user account name, and delete the account name that

includes “@”. Then create a new account name.

If no other account name exists:

ꢂ

Cannot log on to Windows.

(“The user name or pass-

word is incorrect.” is dis-

played.)

You need to reinstall Windows ( page 26).

ꢀ

Display

ꢁ

The screen becomes black

for a moment.

When you set [Intel(R) video driver power saving function] - [Intel(R) Display Power

Saving Technology] of Power Plan Extension Utility to [Enabled], if you do the following

operations, the screen becomes black for a moment, but this is not a malfunction.

You can use it.

ꢂ

Adjust the brightness of the screen with

Remove and insert the AC adaptor.

Fn F1 Fn F2

ꢃ

While you are using motion video playback software, benchmark software for graphic, if er-

ror screen is displayed or application software does not function normally, set [Intel(R) video

driver power saving function] - [Intel(R) Display Power Saving Technology] to [Disabled].

When you set [Intel video driver power saving function (Intel(R) Display Power Saving

Technology)] of Power Saving Utility to [Enable], if you do the following operations, the

screen becomes black for a moment, but this is not a malfunction. You can use it.

ꢂ

Adjust the brightness of the screen with

Remove and insert the AC adaptor.

Fn F1 Fn F2

ꢃ

While you are using motion video playback software, benchmark software for graphic, if

error screen is displayed or application software does not function normally, set [Intel video

driver power saving function (Intel(R) Display Power Saving Technology)] to [Disable].

No display.

The external display is selected. Press

Fn F3

(or

) to switch the

ꢂ

display. Wait until the display has been switched completely before pressing

Fn F3

(or

) again.

The display is turned off by the power-saving function. To resume, do not press the

ꢂ

direct selection keys, but press any other key like

Ctrl

The computer entered

the power-saving function. To resume, slide the power switch.

The screen may become darker. Press to make the screen brighter.

sleep/

standby or hibernation by

ꢂ

Fn F2

Changing the number of display colors and resolution may affect the screen. Restart the

computer.

The screen is disordered.

The refresh rate of the internal LCD may be 40 hertz. Change the refresh rate of the

internal LCD.

ꢂ

A Right-click on the desktop, and click [Graphics Properties].

B Click [General Settings].

C If [Refresh Rate] of the Notebook is [40 Hz], change to [60 Hz] and click [OK].

If the external display does not support the power saving function, it may not work nor-

mally when the computer enters the power saving mode. Turn off the external display.

ꢂ

The external display does

not work normally.

Download from Www.Somanuals.com. All Manuals Search And Download.

Battery

ꢁ

The battery level is very low (the charge is approx. 9 or less).

ꢂ

The battery indicator lights

red.

Connect the AC adaptor. You can use the computer when the indicator light is orange.

If you do not have an AC adaptor, save your data and power off your computer. After

replacing the battery pack with a fully charged one, turn your computer on again.

The battery indicator is blink-

ing.

If blinking red:

ꢂ

Quickly save your data and power off your computer. Remove the battery pack and dis-

connect the AC adaptor, then connect them again. If the problem persists, contact your

technical support ofﬁce. The battery pack or charging circuit may be defective.

If blinking orange:

The battery indicator blinks orange several times also when you slide the battery latch,

ꢃ

but this is not a malfunction.

Battery cannot be recharged temporarily because the internal temperature of the bat-

tery pack is outside the acceptable temperature range for recharging. Your computer

can be used normally in this state. Once the range requirement is satisﬁed, charging

begins automatically.

ꢃ

Software applications and peripheral devices (USB devices, etc.) are consuming too

much power. Exit the software applications currently running, and remove all peripher-

als. Once the range requirement is satisﬁed, charging begins automatically.

ꢃ

The battery is recharging.

ꢂ

The battery indicator is ﬂash-

If [Battery Charging Indicator] in the [Main] menu of the Setup Utility is set to [Flashing],

the indicator will alternately become lighter and darker.

ing.

Touch Pad/Screen/Keyboard

ꢁ

When using the external mouse, connect it correctly.

Restart the computer by using the keyboard.

ꢂ

The cursor does not work.

Press

and press

two times, and press

to select [Restart] and press

ꢄ

ꢀ

Enter

, and to select [Restart].

If the computer does not respond to keyboard commands, read “No response”

ꢂ

(

page 32).

ꢀ

Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.

The drivers for some mice may disable the touch pad. Check your mouse’s operating

instructions.

ꢂ

Cannot input using the touch

pad.

Perform the screen calibration ( page 18).

If external mouse driver is installed, you may not be possible to use the Touch Pad.

Uninstall external mouse driver.

ꢂ

ꢀ

Cannot point the correct

position using the pen (in-

cluded) or ﬁnger.

ꢂ

Cannot point the correct position using your ﬁnger after resuming form sleep or hiberna-

tion while the display is rotated.

Proceed as follows.

ꢃ

APress the

(USER) button to open the Dashboard for CF-C1.

BUse the digitizer pen to select [Pen Only] at [Screen Input].

CSelect [Touch + Pen] again at [Screen Input].

Proceeding as follows also solves this problem.

ꢃ

AClick

(Start) and input “c:\util\resset\resset.exe” in [Search programs and ﬁles],

then press

Enter

BClick [Yes] on the [User Account Control] screen.

CSelect [Disabled] and click [OK].

DClick [Yes] when you are prompted to restart the computer.

ꢂ

If the cursor does not move correctly after calibration, reset the parameters and perform

the screen calibration again, using the following steps.

A Click

(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].

B Click [Reset].

C If [User Account Control] is displayed, click [Yes].

D Click [OK].

E Click [Calibrate], then perform the screen calibration (

page 18, step 8-C).

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Basic)

Touch Pad/Screen/Keyboard

ꢁ

The application program currently running may not support the image rotation. Quit the

program, and then try to rotate the image.

Install the Wireless Switch Utility, if not installed.

ꢂ

The image on the display

does not rotate.

ꢂ

When you press some keys,

the Software Keyboard ap-

pears.

If you press

and keys simultaneously, the Software Keyboard may appear or

Alt Gr

will be hidden. Proceed as follows to solve this problem.

Click (Start) / [start] - [All Programs] - [Panasonic],

and right-click [Software Keyboard].

B Click [Properties].

C Select [Shortcut] tab, and delete “Ctrl + Alt + S” in [Shortcut key], and click [OK].

D If [You will need to provide administrator permission to change these settings.] (or a

similar message) is displayed, click [Continue].

Reference Manual

ꢁ

Install Adobe Reader.

ꢂ

The Reference Manual is

not displayed.

A Log on to Windows as an administrator.

Click

(Start) and input “c:\util\reader\Setup.exe” in [Search programs and ﬁles]

then press

Enter

Click [start] - [Run] and input “c:\util\reader\Setup.exe”, then click [OK].

C Update Adobe Reader to its latest version.

If your computer is connected to the internet, start up Adobe Reader and click [Help]

- [Check for Updates...].

(

ꢀpage 17)

Others

ꢁ

No response.

Press

to open Task Manager and close the software application

ꢂ

Ctrl Shift Esc

that is not responding.

An input screen (e.g., password input screen at startup) may be hidden behind another

window. Press to check.

Slide the power switch for four seconds or longer to shut down the computer, and then slide

the power switch to turn it on. If the application program does not work normally, uninstall

and reinstall the program. To uninstall,

Alt Tab

click

(Start) - [Control Panel] - [Programs] - [Uninstall a program].

click [start] - [Control Panel] - [Add or Remove Programs].

When using the Web Camera after the computer resumes from sleep or hibernation, wait for

about 10 seconds before starting up the software.

ꢂ

The Web Camera does not

operate.

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED USE LICENSE AGREEMENT

THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC PRODUCT (“PRODUCT”)

ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH

THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY

DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE.

Panasonic Corporation has developed or otherwise obtained the Programs and hereby licenses their use to you. You

assume sole responsibility for the selection of the Product (including the associated Programs) to achieve your intend-

ed results, and for the installation, use and results obtained therefrom.

LICENSE

A. Panasonic Corporation hereby grants you a personal, non-transferable and non-exclusive right and license to use

the Programs in accordance with the terms and conditions stated in this Agreement. You acknowledge that you are

receiving only a LIMITED LICENSE TO USE the Programs and related documentation and that you shall obtain

no title, ownership nor any other rights in or to the Programs and related documentation nor in or to the algorithms,

concepts, designs and ideas represented by or incorporated in the Programs and related documentation, all of

which title, ownership and rights shall remain with Panasonic Corporation or its suppliers.

B. You may use the Programs only on the single Product which was accompanied by the Programs.

C. You and your employees and agents are required to protect the conﬁdentiality of the Programs. You may not distrib-

ute or otherwise make the Programs or related documentation available to any third party, by time-sharing or other-

wise, without the prior written consent of Panasonic Corporation.

D. You may not copy or reproduce, or permit to be copied or reproduced, the Programs or related documentation for

any purpose, except that you may make one (1) copy of the Programs for backup purposes only in support of your

use of the Programs on the single Product which was accompanied by the Programs. You shall not modify, or at-

tempt to modify, the Programs.

E. You may transfer the Programs and license them to another party only in connection with your transfer of the single

Product which was accompanied by the Programs to such other party. At the time of such a transfer, you must also

transfer all copies, whether in printed or machine readable form, of every Program, and the related documentation,

to the same party or destroy any such copies not so transferred.

F. You may not remove any copyright, trademark or other notice or product identiﬁcation from the Programs and you

must reproduce and include any such notice or product identiﬁcation on any copy of any Program.

YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE

THE PROGRAMS, OR ANY COPY THEREOF, IN WHOLE OR IN PART.

YOU MAY NOT USE, COPY, MODIFY, ALTER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF, IN

WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THE LICENSE.

IF YOU TRANSFER POSSESSION OF ANY COPY OF ANY PROGRAM TO ANOTHER PARTY, EXCEPT AS PER-

MITTED IN PARAGRAPH E ABOVE, YOUR LICENSE IS AUTOMATICALLY TERMINATED.

TERM

This license is effective only for so long as you own or lease the Product, unless earlier terminated. You may termi-

nate this license at any time by destroying, at your expense, the Programs and related documentation together with

all copies thereof in any form. This license will also terminate effective immediately upon occurrence of the conditions

thereof set forth elsewhere in this Agreement, or if you fail to comply with any term or condition contained herein. Upon

any such termination, you agree to destroy, at your expense, the Programs and related documentation together with all

copies thereof in any form.

YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND

BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT IT IS THE COMPLETE AND EXCLUSIVE STATE-

MENT OF THE AGREEMENT BETWEEN US, WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT,

ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN US, RELATING TO THE SUBJECT MAT-

TER OF THIS AGREEMENT.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

This page provides the speciﬁcations for the basic model.

The model number is different according to the unit conﬁguration.

To check the model number:

Check the bottom of the computer or the box the computer came in at the time of purchase.

ꢂ

Run the Setup Utility (

Reference Manual “Setup Utility”) and select [Information] menu.

ꢀ

[CPU Speed]: CPU speed, [Memory Size]: Memory size, [Hard Disk]: Hard disk drive size

Main Speciﬁcations

ꢁ

Model No.

CPU

CF-C1ADAAZDE/CF-C1ADAAZGE

Intel^®vPro^TMTechnology^*1

CF-C1ATAAZDE/CF-C1ATAAZGE

GHz

Intel Core™ i5-520M vPro™ processor (2.40

with Turbo Boost up to 2.93

MB^*2

Intel Smart Cache 3

)

Chipset

Mobile Intel^®QM57 Express Chipset

Main Memory^*2*3

Video Memory^*2*4

Max.)

GB GB

, DDR3 SDRAM (6

Max. (When Memory is 4 )

UMA 763

Max. (When Memory is 2

) / UMA 1563

UMA 1024

Max.

Video Controller

Hard Disk Drive^*5

Intel^®HD Graphics (Built-in Chip Set)

250

Approx. 300

is used as a partition with recovery tools. (Users cannot use this partition.)

Display Method

Internal LCD

12.1 WXGA type (TFT) (1280 × 800 dots)

65,536/16,777,216 colors (1280 x 800 dots)^*6

External Display^*7

65,536/16,777,216 colors (800 x 600 dots/1024 x 768 dots/1280 x 720 dots/1280 x 768 dots/

1280 x 1024 dots/1400 x 1050 dots/1680 x 1050 dots/1600 x 1200 dots/1920 x 1080 dots/

1920 x 1200 dots)

Simultaneous Display on LCD 65,536/16,777,216 colors (800 x 600 dots/1024 x 768 dots/1280 x 720 dots/1280 x 768 dots/

+ External Display^*7

Wireless LAN ^*8

Bluetooth^*9

1280 x 800 dots)^*6

Intel^®Centrino^®Advanced-N 6200 ( page 35)

ꢀ

page 35

ꢀ

LAN^*10

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T

Modem^*11

Data: 56

kbps

(V.92) FAX: 14.4

Fingerprint Reader^*12

Web Camera^*13

Sound

Array Size: 192 x 4 pixels, Image Size: 192 x 512 pixels, Image Resolution: 508 DPI

640 x 480 dots, 30 fps

WAVE and MIDI playback, Intel^®High Deﬁnition Audio subsystem support, Monaural Speaker

(built-in), Microphone arrays (built-in)

Security Chip

TPM (TCG V1.2 compliant)^*14

mA mA

Card Slots

PC Card Slot

x 1, Type I or Type II, Allowable current 3.3 : 400

, 5 : 400

SD Memory Card x 1

Slot^*15

Contact Smart

Card Slot^*16

x 1

RAM Module Slot

Interface

x 1, DDR3 SDRAM, 204-pin, 1.5 , SO-DIMM, PC3-6400 Compliant

USB port x 3 (USB 2.0 x 3)^*17/ Modem Port (RJ-11)^*11/ LAN Port (RJ-45)^*10/ External Display

Port: Mini Dsub 15-pin female / Microphone Jack^*18: Miniature jack, 3.5 DIA / Headphone Jack:

Miniature jack, 3.5 DIA / Port Replicator Connector: Dedicated 84-pin male

Keyboard / Pointing Device

83 or 84 keys/Touch Pad/Digitizer + Multi touch 83 or 84 keys/Touch Pad/Multi touch (Resistive)

(Capacitive)

Power Supply

AC Adaptor^*19

AC adaptor or Battery pack

Hz Hz

Input: 100 - 240 AC, 50 /60

Output: 16 DC, 5.0

Download from Www.Somanuals.com. All Manuals Search And Download.

Model No.

CF-C1ADAAZDE/CF-C1ADAAZGE

CF-C1ATAAZDE/CF-C1ATAAZGE

(Typ.), 5.7 (Min.)

Battery Pack

Li-ion 7.4 , 6.0

Operating Time^*20

Approx. 10.0 hours (When using 1 battery pack: approx. 5.0 hours) (Economy Mode (ECO) –

Disable)

Charging Time^*21

Approx. 3.0 hours (Power off) / Approx. 5.0 hours (Power on)

(When using 1 battery pack: Approx. 2.5 hours (Power off) / Approx. 4.0 hours (Power on))

W^*23

× 226.5

Power Consumption^*22

Approx. 35

/ Approx. 80 (maximum when recharging in the ON state)

(at the front)/44.3 (at the rear)

Physical Dimensions (W × D × H) 299.2

Weight^*24

× 30.6

Approx. 1.69

(When using 1 battery pack: approx. 1.49

)

°C

Operation Temperature

to 35

30 % to 80 % RH (No condensation)

°C °C

Humidity

Storage

OS^*25

Temperature

Humidity

-20

to 60

30 % to 90 % RH (No condensation)

Genuine Windows^®7 Professional

Genuine Microsoft^®Windows^®XP Tablet PC Edition Service Pack 3

Pre-installed Software^*25

Adobe Reader^*26/ Loupe Utility / Touch Pad Utility / PC Information Viewer / PC Information

Popup / Display Rotation Tool / Hotkey Settings / Wireless Switch Utility / Intel^®Rapid Storage

Technology / Bluetooth™ Stack for Windows by TOSHIBA^*9/ Battery Recalibration Utility / Intel^®

PROSet/Wireless Software / Wireless Connection Disable Utility^*27/ Protector Suite^{*12 *27}/ Dash-

board for CF-C1 / Hand Writing Utility / Software Keyboard / Camera Utility^*13

Microsoft^®Internet Explorer 8.0 / DirectX 11^*28/ Microsoft^®Windows^®Media Player 12 / Microsoft^®

.NET Framework 3.5.1 / Inﬁneon TPM Professional Package V3.6^*29/ Power Plan Extension Utility

Microsoft^®Internet Explorer 6 Service Pack 3 / DirectX 9.0c / Microsoft^®Windows^®Media

Player 10 / Microsoft^®Windows^®Movie Maker 2.1 / Microsoft^®.NET Framework 3.5 SP1 / Icon

Enlarger / Power Saving Utility / FAN Control Utility / Economy Mode (ECO) Setting Utility /

Inﬁneon TPM Professional Package V3.5SP1^*29

Aptio Setup Utility / Hard Disk Data Erase Utility^*30/ PC-Diagnostic Utility

Wireless LAN <Only for model with wireless LAN>

ꢁ

*31

Mbps

(automatically switched)

*31

Data Transfer Rates

IEEE802.11a : 54/48/36/24/18/12/9/6

Mbps

IEEE802.11b : 11/5.5/2/1

(automatically switched)

Mbps

*31

IEEE802.11g : 54/48/36/24/18/12/9/6

(automatically switched)

Mbps

IEEE802.11n : (HT20) GI = 400ns: 144/130/115/86/72/65/57/43/39/28/21/14/7

(automati-

cally switched)^*31

Mbps

GI = 800ns: 130/117/104/78/65/58/52/39/26/19/13/6

Mbps

(HT40) GI = 400ns: 300/270/240/180/150/135/120/90/60/45/30/15

(automatically switched)^*31

Mbps

GI = 800ns: 270/243/216/162/135/121/108/81/54/40/27/13

IEEE802.11a / IEEE802.11b / IEEE802.11g / IEEE802.11n

OFDM system, DSSS system

Standards Supported

Transmission method

Wireless Channels Used

IEEE802.11a : Channels 36/40/44/48/52/56/60/64/100/104/108/112/116/120/124/128/132/136/

140

IEEE802.11b/IEEE802.11g : Channels 1 to 13

IEEE802.11n : Channels 1-13/36/40/44/48/52/56/60/64/100/104/108/112/116/120/124/128/132/

136/140

GHz

- 5.32

RF Frequency Band

IEEE802.11a : 5.18

IEEE802.11b/IEEE802.11g : 2.412

GHz

- 5.32

, 5.5

- 5.7

GHz

- 2.472

GHz

- 5.7

IEEE802.11n : 2.412

- 2.472

, 5.18

, 5.5

Bluetooth™ <Only for model with Bluetooth>

ꢁ

Bluetooth Version

2.1 + EDR

Transmission method

Wireless Channels Used

RF Frequency Band

FHSS system

Channels 1 to 79

GHz

- 2.48

2.402

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

The Intel^®Active Management Technology (Intel^®AMT) function must be set before use.

= 1,073,741,824 bytes

= 1,048,576 bytes / 1

You can physically expand the memory up to 4

the actual system conﬁguration.

, but the total amount of usable memory available will be less depending on

A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video

Memory cannot be set by the user.

The size of Video memory is allotted depending on the operating system.

MB/GB

= 1,000,000,000 bytes. Your operating system or some application software will report as fewer

= 1,000,000 bytes. 1

A 16,777,216 color display is achieved by using the dithering function.

Display may be impossible using some connected external displays.

Only for model with wireless LAN.

Continua Certiﬁed, compliant design guideline version 1, with Blood Pressure Monitor, Cardiovascular and Weighing Scale de-

vice only by Bluetooth.

Some devices cannot be used depending on the port type.

Only for model with modem.

*10

*11

*12

*13

*14

Only for model with ﬁngerprint reader.

Only for model with Web Camera.

Only for model that supports TPM.

For information on TPM, click

(Start) and input “c:\util\drivers\tpm\README.pdf” in [Search programs and

ﬁles] and press

, and refer to the Installation Manual of “Trusted Platform Module (TPM)”.

Enter

For information on TPM, click [start] - [Run] and input “c:\util\drivers\tpm\README.pdf”, and refer to the Instal-

lation Manual of “Trusted Platform Module (TPM)”.

This slot is not compatible with the UHS-I high speed transfer.

*15

Operation has been tested and conﬁrmed using Panasonic SD Memory Card with a capacity of up to 2

, Panasonic SDHC

Memory Card with a capacity of up to 32

, and

Panasonic SDXC Memory Card with a capacity of up to 64

Operation on other SD equipment is not guaranteed.

Only for model with Smart Card Slot

Does not guarantee operation of all USB-compatible peripherals.

Use a condenser-stereo microphone.

The AC adaptor is compatible with power sources up to 240 AC adaptor. This computer is supplied with a 125 AC compat-

ible AC cord.

*16

*17

*18

*19

20-M-1-1

*20

*21

*22

Measured using MobileMark™ 2007 (LCD brightness : 60 cd/m²).

Varies depending on the usage conditions, or when an optional device is attached.

When Economy Mode (ECO) is enabled, the operating time becomes approximately 20 shorter than when it is disabled.

When Economy Mode (ECO) is enabled, the charging time becomes approx. 5.0 hours (Power on/off)

Varies depending on the usage conditions, CPU speed, etc.

It may take a long time to charge a fully discharged battery.

Approx. 0.9 when the battery pack is fully charged (or not being charged) and the computer is off.

Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.2 ) simply by having the AC adaptor

plugged into an AC outlet.

Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.3 ) simply by having the AC adaptor

plugged into an AC outlet.

Rated power consumption.

*23

23-E-1

*24

*25

Average value. May differ depending on models.

Operations of this computer are not guaranteed except for the pre-installed OS and the installed OS by using the Product Re-

covery DVD-ROM (included).

Some parts of the software in the Product Recovery DVD-ROM may not be installed depending on a model.

*26

Must be installed before use.

*27

*28

*29

*30

*31

Must be installed before use.

The graphics accelerator of this computer supports up to DirectX 10.

Only for model that supports TPM. Must be installed before use.

The Product Recovery DVD-ROM is required.

These are speeds speciﬁed in IEEE802.11a+b+g+n standards. Actual speeds may differ.

Download from Www.Somanuals.com. All Manuals Search And Download.

Standard Limited Warranty

PANASONIC COMPUTER PRODUCTS EUROPE

Panasonic Computer Products Europe (referred to as “Panasonic”) will repair this product (other than software, which

is treated in a different section of this warranty) with new or refurbished parts, from the date of original purchase in the

event of a defect in materials or workmanship. This warranty only applies to new Panasonic Toughbooks purchased in

the EEA and Switzerland and Turkey.

Panasonic (or its authorised Service Provider) target to repair your equipment within 48 hours from its receipt in our

service centre.

Additional charges may apply for shipment to countries outside of the European Union. Panasonic will use all reason-

able endeavours to ensure this service.

This warranty only covers failures due to defects in materials or workmanship which occur during normal use for the

applicable Service Agreement Period listed below. In the event that any product (or part thereof) is replaced, Panason-

ic shall transfer ownership of the replacement product (or part) to the customer and the customer shall transfer owner-

ship of the replaced product (or part) to Panasonic.

Service Agreement Period - from original date of purchase

ꢃToughbooks (and every accessory included in the original packaging except the battery) - 3 years

ꢃAccessories included in the original package - 3 years

ꢃAdditional peripherals manufactured by Panasonic (including media bay devices such as CD-Rom drives) - 1 year

ꢃBatteries - 6 months. Panasonic Warranty covers the battery for six months. A battery is considered good if it

maintains 50% of its charge capacity during the warranty period. If a battery is returned under this contract and

testing determines that it has charge capacity greater than 50%, the battery will be returned with an invoice for

the retail purchase price of a new battery.

This warranty is extended solely to the original purchaser. A purchase receipt or other proof of date of original pur-

chase will be required before warranty performance is rendered.

Limits and Exclusions:

This warranty does not cover and shall be void for:

ꢃBroken or cracked LCD screen.

ꢃDefective pixel in notebook displays and LCD screens within 0.002%

ꢃDamage that is attributable to ﬁre, theft or acts of God.

ꢃDamage caused by environmental inﬂuences (electrical storms, magnetic ﬁelds etc.).

ꢃDamage which has not been caused during normal operation

ꢃRepair of damage that is cosmetic only or does not affect product functionality such as wear and tear, scratches

and dents.

ꢃFailures caused by products not supplied by Panasonic.

ꢃFailures resulting from alteration, accidental damage, casualty, misuse, abuse or neglect.

ꢃIntroduction of liquid or other foreign matter into the unit.

ꢃImproper installation, operation or maintenance.

ꢃImproper connections with peripherals.

ꢃMaladjustment of consumer controls such as function settings.

ꢃModiﬁcation or service by anyone other than Panasonic or its approved Service Providers.

ꢃProducts used as short term rental or leased equipment.

ꢃProducts whose serial number has been removed making the unit warranty condition impossible to clearly deter-

mine.

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR

TRAFFIC CONTROL EQUIPMENT/SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS^*1. PANASONIC

WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RESULTING FROM THE USE OF THIS PRODUCT ARISING

OUT OF THE FOREGOING USES.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems

when used during critical phases of ﬂight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Sys-

tems and 2 EFB Systems are deﬁned by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaﬂets)

No.36.

There are no other express warranties except as listed above.

We strongly recommend that customers backup their data before sending back their unit to an Authorised Service Pro-

vider.

Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of

this product, or arising out of any breach of this warranty. All express and implied warranties, including the warranties

of satisfactory quality and ﬁtness for a particular purpose are limited to the applicable warranty period set forth above.

Panasonic shall not be liable for any indirect, special or consequential loss or damage (including without limitation any

loss of proﬁts) arising from the use of this product or for any breach of this warranty.

This limited warranty gives you speciﬁc legal rights, and you may have other rights that vary from country to country.

You must consult the applicable country laws for a full determination of your rights. This limited warranty is in addition

to, and does not affect any rights arising out of any contract of sale or by statute.

Download from Www.Somanuals.com. All Manuals Search And Download.

Standard Limited Warranty

PANASONIC COMPUTER PRODUCTS EUROPE

Data Storage Media

Data Storage Media is the media on which the Operating System, drivers and programs originally installed by Pana-

sonic on the main unit are stored. This media is originally provided with the unit.

Panasonic warrants to you only that the disc(s) or other media on which the Programs are furnished will be free from

defects in material and workmanship under normal use for a period of sixty (60) days from the date of delivery thereof

to you, as evidenced by your purchase receipt.

This is the only warranty Panasonic makes to you. Panasonic does not warrant that the functions contained in the Pro-

grams will meet your requirements or that the operation of the Programs will be uninterrupted or error free.

Panasonic’s entire liability and your exclusive remedy under this warranty shall be limited to the replacement of any

defective disk or other media which is returned to Panasonic's authorized Service Centre, together with a copy of the

purchase receipt, within the aforesaid warranty period.

Panasonic shall have no obligation for any defects in the disk(s) or other media on which the Programs are furnished

resulting from your storage thereof, or for defects that have been caused by operation of the disk(s) or other media

otherwise than on the Product or in the environment conditions other than those speciﬁed by Panasonic by alteration,

accident, misuse, abuse, neglect, mishandling, misapplication, installation, maladjustment of consumer controls, im-

proper maintenance, modiﬁcation or damage that is attributable to acts of God. In addition, Panasonic shall have no

obligation for any defects in the disk(s) or other media if you have modiﬁed, or attempted to modify any Program.

Duration of implied warranties, if any is limited to sixty (60) days.

Pre-installed software

Pre-installed software means the software shipped pre-loaded by Panasonic, not that loaded by any third party or sell-

ing agent.

Panasonic and its suppliers makes no warranty, either express, implied or statutory, with respect to software provided

with the Product and licensed to Purchaser, its quality, performance, merchantability, or ﬁtness for a particular purpose.

Panasonic does not warrant that the functions contained in the software will be uninterrupted or error free. Panasonic

assumes no risk of and shall not in any case be liable for any damages, including, without limitation, any special,

incidental, consequential, or punitive damages arising from breach of warranty or contract, negligence or any other

legal theory, including, without limitation loss of goodwill, proﬁts or revenue, loss of use of the Programs or Products or

any associated equipment, cost of capital, cost of any substitute equipment, facilities, or services, downtime costs, or

claims of any party dealing with such damages.

Some countries do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how

long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This limited warranty gives you speciﬁc legal rights and you may also have other rights that vary from country to coun-

try. You must consult applicable country laws for a full determination of your rights.

Contacts

Address

Panasonic Computer Products Europe

Service Centre Building B4,

Wyncliffe Road, Pentwyn Industrial Estate, Cardiff,

United Kingdom

CF23 7XB

http://www.toughbook.eu/

Web page

Helpdesk

English speaking service

French speaking service

German speaking service

Italian speaking service

Spanish speaking service

E-mail address

+44 (0) 8709 079 079

+33 (0) 1 55 93 66 60

+49 (0) 1805 410 930

+39 (0) 848 391 999

+34 (0) 901 101 157

[email protected]

Czech speaking service

Hungarian speaking service

Polish speaking service

Romanian speaking service

Slovakian speaking service

E-mail address

+420 (0) 800 143234

+36 (0) 6800 163 67

+48 (0) 800 4911558

+40 (0) 800 894 743

+421 (0) 800 42672627

[email protected]

Payments

[email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

Download from Www.Somanuals.com. All Manuals Search And Download.

As an NERGY TAR^®Partner, Panasonic Corporation has determined that this

product meets the NERGY TAR^®guidelines for energy efﬁciency. By enabling

available power management settings, Panasonic computers enter a low-power sleep

mode after a period of inactivity, saving the user energy.

Outline of the International NERGY TAR^®Ofﬁce Equipment Program

The international NERGY TAR^®Ofﬁce Equipment Program is an international program that promotes energy

saving through the use of computers and other ofﬁce equipment. The program backs the development and dis-

semination of products with functions that effectively reduce energy consumption. It is an open system in which

business proprietors can participate voluntarily. The targeted products are ofﬁce equipment such as computers,

displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.

22-E-1

Importer’s name & address pursuant to the EU GPSD (General Product Safety Directive) 2001/95/EC Art.5

Panasonic Computer Products Europe, Panasonic Marketing Europe GmbH

Hagenauer Straße 43

65203 Wiesbaden

Germany

UK0710-1100

CPE02283YA

Printed in U.K.

Download from Www.Somanuals.com. All Manuals Search And Download.

Miller Electric Welding System Big Blue 251D User Manual
MSi Computer Hardware MS 6566 User Manual
NETGEAR Switch FS605 v3 User Manual
Niles Audio Speaker System NS IW560C User Manual
NorthStar Navigation Saw 701EU User Manual
Optiview Security Camera DVRJ4B User Manual
Oregon Scientific Clock JMR828A User Manual
Orion Car Audio Speaker CO104S User Manual
Palm Cell Phone Accessories 3350WW User Manual
Panasonic DVD Player DVD K32 User Manual