Panasonic Laptop CF 74GCDADBM User Manual

ORDER NO.

CPD0705211C3

Notebook Computer

^{Model No.}CF-74GCDADBM

This is the Service Manual for

the following areas.

M …for U.S.A. and Canada

Unauthorized copying and distribution is a violation of law.

Download from Www.Somanuals.com. All Manuals Search And Download.

^{Download from Www.Somanuals.co}1^{m. All Manuals Search And Download.}

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

1. Specifications ··················································································································1-1

2. Names and Functions of Parts ······················································································2-1

3. Block Diagram ···············································································································3-1

4. Diagnosis Procedure ·····································································································4-1

5. Power-On Self Test (Boot Check) ·················································································5-1

6. List of Error Codes <Only when the port replicator is connected> ································6-1

7. Self Diagnosis Test ········································································································7-1

8. Wiring Connection Diagram ··························································································8-1

9. Disassembly/Reassembly ·····························································································9-1

10. Exploded View ···········································································································10-1

11. Replacement Parts List ·····························································································11-1

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Specifications

This page provides the specifications for the basic model CF-74GCDADBM / CF-74GCDCDBM / CF-74GCDEDBM /

CF-74HCDAZBM / CF-74GCDBDBM / CF-74GCDDDBM / CF-74GCDFDBM / CF-74HCDBZBM. The model number is

different according to the unit configuration.

To check the model number:

Check the bottom of the computer or the box the computer came in at the time of purchase.

To check CPU speed, memory size and the hard disk drive (HDD) size:

Run the Setup Utility and select [Information] menu.

[CPU Speed]: CPU speed, [System Memory]: Memory size, [Hard Disk]: Hard disk drive size

Main Specifications

Model No.

CF-74GCDADBM / CF-74GCDCDBM /

CF-74GCDEDBM / CF-74HCDAZBM

CF-74GCDBDBM / CF-74GCDDDBM /

CF-74GCDFDBM / CF-74HCDBZBM

Intel^®Core™ 2 Duo Processor T7300 (2.0 GHz, 4 MB^*1L2 cache, 800 MHz FSB)

CPU

Mobile Intel^®GM965 Express Chipsets with ICH8M

Chipset

Memory^*1*2

1024 MB (4096 MB Max.)

Video Memory^*1*3

UMA (384 MB Max.)

Hard Disk Drive^*4

CD/DVD Drive

Data

80 GB

DVD-ROM & CD-R/RW Drive

DVD MULTI Drive

Reading^*6

Writing^*7

DVD-ROM: 8X (Max.), CD-ROM: 24X (Max.)

Transfer

Rate^*5

CD-R: 4X/8X/10-16X/10-24X

CD-RW: 4X

High-Speed CD-RW: 4X/10X

Ultra-Speed CD-RW: 10X/10-24X

CD-R: 8X/8-12X/8-16X/8-24X

CD-RW: 4X

High-Speed CD-RW: 4X/8X/10X

Ultra-Speed CD-RW: 8X/10X

DVD-R: 1X/2X/2-4X/2-6X/2-8X

DVD-RW: 1X/2X/2-4X

DVD-RAM: 2X/3X/3-5X

+R: 2.4X/2.4-4X/2.4-6X/2.4-8X

+R DL: 2.4X

+RW: 2.4X/2.4-4X

Supported Reading

Discs/

Format

DVD-ROM (4.7 GB, 8.5 GB, 9.4 GB, 17 GB), DVD-Video, DVD-R (1.4 GB, 3.95 GB, 4.7 GB),

DVD-R DL (8.5 GB), DVD-RW^*8(1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB), DVD-RAM^*9(1.4 GB, 2.8

GB, 2.6 GB, 5.2 GB, 4.7 GB, 9.4 GB), +R (4.7 GB), +R DL (8.5 GB), +RW (4.7 GB), CD-Audio,

CD-ROM, CD-R, Photo CD, Video CD, CD-RW, CD TEXT, CD-EXTRA

Writing

CD-R, CD-RW, High-Speed CD-RW, Ultra-

Speed CD-RW

DVD-R (1.4 GB, 4.7 GB for General),

DVD-RW^*8(1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB),

DVD-RAM^*9(1.4 GB, 2.8 GB, 4.7 GB, 9.4 GB),

+R (4.7 GB), +R DL (8.5 GB), +RW (4.7 GB),

CD-R, CD-RW

13.3 XGA type (TFT) with Touchscreen^*10

Display Method

Internal LCD^*11

65,536/16,777,216 colors (800

600 dots/1024

768 dots)

External Display^*12

65,536/16,777,216 colors (800

600 dots/1024

1536 dots)

768 dots/1280

1024 dots/1400

1050

dots/1600

1200 dots/2048

Wireless LAN^*13

Bluetooth^*14

LAN

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T

Modem

Sound

Data: 56 kbps (V.92) FAX: 14.4 kbps

WAVE and MIDI playback, Stereo speaker, Intel^®High Definition Audio subsystem support

TPM (TCG V1.2 compliant)^*15

Security Chip

Card Slot

PC Card

Type I or Type II x 1 (3.3 V: 400 mA, 5 V: 400 mA)

ExpressCard/34 or ExpressCard/54 x 1

ExpressCard

SD Memory Card^*16x 1, Data transfer rate = 8 MB per second^*17

Smart Card^*18

x 1

1-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Main Specifications

RAM Module Slot

Interface

200-pin, 1.8 V, SO-DIMM, DDR2 SDRAM, PC2-5300 Compliant

USB port (4-pin, USB 2.0) x 2, Serial Port (Dsub 9-pin male), Modem port (RJ-11), LAN port

(RJ-45), External display port (Mini Dsub 15-pin female), Expansion Bus Connector (Dedicated

65-pin female), Microphone Jack (Miniature jack, 3.5 DIA, Stereo), Headphone Jack (Miniature

jack, 3.5 DIA, Impedance 32 Ω, Output Power 4 mW

Keyboard / Pointing Device

Power Supply

87 keys / Touch Pad / Touchscreen (Anti-Reflection, Stylus (included) touch capable)

AC adaptor or Battery pack

*19

Input: 100 V to 240 V AC, 50 Hz/60 Hz, Output: 15.6 V DC, 8.0 A

AC Adaptor

Battery Pack

Li-ion 11.1 V, 7.8 Ah

*20*21

*22

*23

Operating Time

Approx. 6 hours to Approx. 9 hours (Approx. 8 hours

)

*20

Approx. 4.5 hours

Charging Time

Clock Battery

Coin type lithium battery 3.0 V

*24

*25

Power Consumption

Approx. 50 W / Approx. 100 W (Maximum when recharging in the ON state)

Physical Dimensions (W

(including the carrying handle)

D) 303.5 mm

43.6 - 60.1 mm

293.3 mm {12.0"

1.7 - 2.4"

11.6"}

Weight

Approx. 2.7 kg {Approx. 6.0 lb.}

(including the carrying handle)

Operation Environment

Storage Environment

Operating System

Temperature: 5 °C to 35 °C {41 °F to 95 °F}

Humidity: 30% to 80% RH (No condensation)

Temperature: -20 °C to 60 °C {-4 °F to 140 °F}

Humidity: 30% to 90% RH (No condensation)

Microsoft Windows XP Professional Service Pack 2 with Advanced Security Technologies

(NTFS File System)

Utility Programs

DMI Viewer, Microsoft Windows Media Player 10, Adobe Reader, PC Information Viewer, SD

Utility, Icon Enlarger, Loupe Utility, WinDVD™ 5 (OEM Version), B’s Recorder GOLD8 BASIC,

*13

B’s CLiP 6, Intel Matrix Storage Manager, Intel PROSet/Wireless Software , Bluetooth™

Stack for Windows by TOSHIBA , Wireless Switch Utility, Hotkey Settings, Battery Recali-

bration Utility, LAN Power-Saving Utility, Infineon TPM Professional Package , Recover Pro™

*14

*26

*27

Setup Utility, PC-Diagnostic Utility, Hard Disk Data Erase Utility

Wireless LAN <Only for model with wireless LAN>

*28

Intel Wireless WiFi link 4965 AGN (802.11 a + b + g) PCI Ex. 1/4

*29

IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)

Data Transfer Rates

IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)

IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched)

Standards Supported

Transmission method

Wireless Channels Used

IEEE802.11a/IEEE802.11b/IEEE802.11g

OFDM system, DSSS system

IEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165

IEEE802.11b/IEEE802.11g: Channels 1 to 11

RF Frequency Band

IEEE802.11a: 5.18-5.32 GHz, 5.745-5.825 GHz

IEEE802.11b/IEEE802.11g: 2.412-2.462 GHz

Bluetooth™ <Only for model with Bluetooth>

Bluetooth Version

2.0 + EDR

Transmission method

Wireless Channels Used

RF Frequency Band

FHSS system

Channels 1 to 79

2.402-2.48 GHz

1MB = 1,048,576 bytes

A segment of the main memory is allotted automatically

depending on the computer’s operating status. The size of

the Video Memory cannot be set by the user.

You can physically expand the memory up to 4 GB, but the

total amount of usable memory available will be less depend-

ing on the actual system configuration.

1GB = 1,000,000,000 bytes. Your operating system or some

application software will report as fewer GB.

1-2

Download from Www.Somanuals.com. All Manuals Search And Download.

*18

*19

The data transfer rate of DVD per 1X speed is 1,350 KB/s.

The data transfer rate of CD per 1X speed is 150 KB/s.

Only for model with Smart Card slot

If an unbalanced disc (e.g., the balance has been displaced

from the center) is inserted, the speed may become slower if

there are large vibrations while the disc is rotating.

The AC adaptor is compatible with power sources up to

240 V AC adaptor. The computer is supplied with a 125 V AC

compatible AC cord. 20-M-2-1

*20

*21

Depending on the disc, the writing speed may become

slower.

Varies depending on the usage conditions.

Measured with the LAN Power-saving functions Auto-off set-

ting set to 1 minute.

Does not support DVD-RW Ver.1.0.

*22

*23

DVD-RAM: Only non-cartridge type or removable cartridge

type can be used.

Measured using BatteryMark™ Version 4.0.1 (LCD bright-

ness: Maximum - Minimum)

*10

*11

Only for model with touchscreen

Measured using MobileMark™ 2005 (LCD brightness: 60 cd/

A 16,777,216 color display is achieved by using the dithering

function.

m )

*24

Approx. 1.0 W when the battery pack is fully charged (or not

being charged) and the computer is OFF.

Approx. 2.0 W when the Wake up from LAN has been

enabled.

This product meets the ENERGY STAR guideline for energy

efficiency.

*12

Maximum resolution depends on the specifications of the

external display.

*13

*14

*15

Only for model with wireless LAN

Only for model with Bluetooth

For information on TPM, click [start] - [Run] and input

“c:\util\drivers\tpm\README.pdf”, and refer to the Installation

Manual of “Trusted Platform Module (TPM)”.

*25

*26

*27

*28

*29

Rated power consumption 23-E-1

You need to install to use the feature.

The Product Recovery DVD-ROM is required.

It does not correspond to IEEE802.11n.

*16

*17

Operation has been tested and confirmed using Panasonic

SD Memory Cards with a capacity of up to 2 GB.

Operation on other SD equipment is not guaranteed.

This computer is not compatible with MultiMediaCards or

SDHC Memory Cards. Do not insert these kinds of cards.

These are speeds specified in IEEE802.11a+b+g standards.

Actual speeds may differ.

Theoretical value and not the actual speed. The transfer rate

does not become higher even if you use a card that supports

the higher transfer rate.

1-3

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Names and Functions of Parts

A :Speaker

B :USB port

C :Stylus holder

D :Multimedia pocket

E :Hard disk drive

F : Carrying handle

J : Power switch

K :Function key

L : Bluetooth antenna

M :Keyboard

N :Touch pad

O :Microphone jack

G :Wireless LAN antenna

A condenser microphone can be used. If other types

of microphones are used, audio input may not be pos-

sible, or malfunctions may occur as a result.

• When recording in stereo using a stereo microphone:

Click [start] - [All Programs] - [SoundMAX] - [Control

Panel] and select [Microphone], and then add a

check mark for [No Filtering] in [Microphone

Enhancements].

• When using a monaural microphone with a 2-termi-

nal plug:

Click [start] - [All Programs] - [SoundMAX] - [Control

Panel] and select [Microphone], and then add a

check mark for [Voice Recording] in [Microphone

Enhancements].

H :LCD

I : LED indicator

: Caps lock

: Numeric key (NumLk)

: Scroll lock (ScrLk)

: Multimedia pocket device status

: Hard disk drive status

: Power status

(Off: Power off/Hibernation, Green: Power on, Blink-

ing green: Standby, Blinking green rapidly: Cannot

power on or resume due to low temperature.)

Otherwise, only audio on the left track will be

recorded.

P :Headphone jack

: Battery status

You can connect headphones or amplified speakers.

When they are connected, audio from the internal

speakers is not heard.

Q :Wireless switch

2-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Right side

EX PC

Rear side

Bottom

A :ExpressCard slot

K :LAN port

L : Modem port

B :PC Card slot

M :Serial port

C :Smart Card slot

N :External display port

O :Security lock

D :USB port

A Kensington cable can be connected.

For further information, read the manual that comes

with the cable.

E :SD Memory Card slot

F : Expansion bus connector

G :SD Memory Card indicator

(Blinking: During access or a password is requested)

H :Ventilation hole

P :Battery pack

Q :Battery latch

R :Multimedia pocket release button

S :Hard disk drive latch

T : RAM module slot

I : Stylus holder

J : DC-IN jack

2-2

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Block Diagram

n a e l

I x 2 D M

3-1

Download from Www.Somanuals.com. All Manuals Search And Download.

4.1.

4-1

Download from Www.Somanuals.com. All Manuals Search And Download.

4.2. Troubleshooting

Please take note of the following two points with regard to troubleshooting:

1. Know-how of diagnosis upon occurrence of heavy troubles, e.g. ‘Set cannot be turned ON’, ‘Set fails to start’, ‘No display on

screen’, etc.

2. Explanation of each trouble, mainly symptom of trouble in operation.

● Flow Chart

Pay attention to the following points when in pursuit of the cause of a troubleshooting.

1. Peripheral apparatus connected with the set should all be removed before operation check.

2. Make sure that cables, boards, etc. are not coming off, and recheck the contact condition.

START

Set cannot be supplied with current.

Power lamp fails to light up.

Adaptor/Battery

Output voltage

Replace AC Adaptor/Battery

Check contact condition of power input terminal. Replace if

defective.

Check Power SW. Replace if defective.

YES

Power lamp

check

Dark display on screen.

Screen fails to display.

Replace inverter board.

Check inverter cable continuity. Replace if defective

Inverter board

LCD back

Replace LCD back light.

light lighting

YES

LCD unit

check

Replace LCD unit.

BIOS operation

check

Replace main board (Check fuse at power source).

Failure in starting

YES

Refer to POST

error code table.

Result of

POST

Replace main board.

Heavy trouble e.g.,

Set-up utility

starting

Replace main board.

‘Set cannot be turned

ON’, ‘Set fails to start’,

‘No display on

Return set-up utility setpoint to the state of ‘delivery from factory’.

screen’, etc.

Check HDD cable connection and continuity.

Replace if defective.

Replace HDD & Reinstall.

Replace main board.

HDD access

YES

Main board

check

Replace main board

Not displayed properly on screen.

Some or all keys cannot be input.

Make sure of contact of K/B connector in use.

Replace keyboard or main board.

Each kind of

trouble in

operation.

Check if there are any flaws on DVD or CD

media. Since flaws may appear on specific

media, DVD or CD media can be defective.

Trouble

symptoms on some

of DVD or CD

DVD/CD CALL not practicable.

YES

Replace DVD drive.

Replace main board.

*Clean DVD-ROM drive with an applicator.

Starts but operates unstably.

Reinstall HDD.

Replace main board.

START

END

4-2

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Power-On Self Test (Boot Check)

Outline of POST

The set has a boot check function called POST (Power-On Self Test) in it. The condition of the main body is diagnosed by checking

beep sound or error code.

z Start .............Test begins automatically when power switch is set to ON.

z Normal finish .....After memory checking, a beep sound is issued once and the set is placed into automatic stop.

Note: If no error occurs, nothing is displayed. (No display of OK, etc.)

Error Diagnosis by Checking Beep Signal Sound

The beep sound is as follows:

(1 (long sound) -2-3-4)

(Length of bar shows length of sound.)

= long sound (about 0.4 sec.),

= short sound (about 0.2 sec.), Length between sounds is about 0.1 sec.

z Table of errors classified by beep sounds

Diagnosis

Beep signal sound

Error message

BIOS ROM error

Main board

1(long sound)-2

1-2-2-3

BIOS ROM error

1-3-1-1

RAM error

1-3-1-3

Keyboard controller error

RAM error

1-3-4-1

1-3-4-3

RAM error

1-4-1-1

RAM error

2-1-2-3

BIOS ROM error

2-2-3-1

Occurrence of unexpected offering

(Note) A beep sound is also issued in case of other I/O trouble.

5-1

Download from Www.Somanuals.com. All Manuals Search And Download.

6 List of Error Codes <Only when the port replicator is connected>

The following is a list of the messages that BIOS can display. Most of them occur during

POST. Some of them display information about a hardware device, e.g., the amount of memory

installed. Others may indicate a problem with a device, such as the way it has been configured.

Following the list are explanations of the messages and remedies for reported problems.

If your system displays one of except the messages marked below with an asterisk (*), write

down the message and contact Panasonic Technical Support. If your system fails after you

make changes in the Setup menus, reset the computer, enter Setup and install Setup defaults

or correct the error.

0200 Failure Fixed Disk

Fixed disk in not working or not configured properly. Check to see if fixed disk is attached

properly. Run Setup. Find out if the fixed-disk type is correctly identified.

0210 Stuck key

Stuck key on keyboard.

0211 Keyboard error

Keyboard not working.

0212 Keyboard Controller Failed

Keyboard controller failed test. May require replacing keyboard controller.

0213 Keyboard locked - Unlock key switch

Unlock the system to proceed.

0230 System RAM Failed at offset : nnnn

System RAM failed at offset nnnn of in the 64k block at which the error was detected.

0231 Shadow RAM Failed at offset : nnnn

Shadow RAM failed at offset nnnn of the 64k block at which the error was detected.

0232 Extended RAM Failed at offset : nnnn

Extended memory not working or not configured properly at offset nnnn.

0250 System battery is dead - Replace and run SETUP

The CMOS clock battery indicator shows the battery is dead. Replace the battery and run Setup

to reconfigure the system.

*0251 System CMOS checksum bad - Default configuration used

System CMOS has been corrupted or modified incorrectly, perhaps by an application program

that changes data stored in CMOS. The BIOS installed Default SETUP Values. If you do not

want these values, enter Setup and enter your own values. If the error persists, check the system

battery or contact Panasonic Technical Support.

0260 System timer error

The timer test failed. Requires repair of system board.

0270 Real time clock error

Real-time clock fails BIOS test. May require board repair.

*0280 Previous boot incomplete - Default configuration used

Previous POST did not complete successfully. POST loads default values and offers to run

Setup. If the failure was caused by incorrect values and they are not corrected, the next boot

will likely fail. On systems with control of wait states, improper Setup settings can also termi-

nate POST and cause this error on the next boot. Run Setup and verify that the wait-state

configuration is correct. This error is cleared the next time the system is booted.

0281 Memory Size found by POST differed from EISA CMOS

Memory size found by POST differed from EISA CMOS.

6-1

Download from Www.Somanuals.com. All Manuals Search And Download.

02D0 System cache error - Cache disabled

Contact Panasonic Technical Support.

02F0: CPU ID:

CPU socket number for Multi-Processor error.

02F4: EISA CMOS not writable

ServerBIOS2 test error: Cannot write to EISA CMOS.

02F5: DMA Test Failed

ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.

02F6: Software NMI Failed

ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).

02F7: Fail - Safe Timer NMI Failed

ServerBIOS2 test error: Fail-Safe Timer takes too long.

device address Conflict

Address conflict for specified device.

Allocation Error for: device

Run ISA or EISA Configuration Utility to resolve resource conflict for the specified device.

Failing Bits : nnnn

The hex number nnnn is a map of the bits at the RAM address which failed the memory test.

Each 1 (one) in the map indicates a failed bit. See error 230,231 or 232 for offset address of the

failure in System, Extended or Shadow memory.

Invalid System Configuration Data

Problem with NVRAM (CMOS) data.

I/O device IRQ conflict

I/O device IRQ conflict error.

Operating System not found

Operating system cannot be located on either drive A: or drive C:. Enter Setup and see if fixed

disk and drive A: are properly identified.

Parity Check 1 nnnn

Parity error found in the system bus. BIOS attempts to locate the address and display it on the

screen. If it cannot locate the address, it displays ????. Parity is a method for checking errors

in binary data. A parity error indicates that some data has been corrupted.

Parity Check 2 nnnn

Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the

screen. If it cannot locate the address, it displays ????.

Press <F1> to resume, <F2> to Setup

Displayed after any recoverable error message. Press <F1> to start the boot process or <F2> to

enter a Setup and change the settings. Write down and follow the information shown on the

screen.

6-2

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Self Diagnosis Test

As for the self-diagnosis test(PC-Diagnostic utility) to use this model, a standard test and the

enhancing test by the module of the main body building in are possible.

●Notes　To skip BIOS password

　　　　　　　　　Use <Ctrl>+<F10> key to skip BIOS password or authentication of fingerprint.

　　　　　　　　　This key is only for entering DIAG mode. Not available to boot the computer.

　　　　　　　　　If customer set "HDD Lock", the DIAG program cannot perform HDD test.

　　　　　　　　　*This key is for service purpose only. Do not disclose this information to unrelated others.

1. Beginning of self-diagnosis test

　1-1. Setting of content of setup

　　　　1.　The power supply of the computer is turned on.

　　　　2.　" F2 " is pushed on the screen of "Panasonic" while " press <F2 to enter Setup> " is displayed.

　　　　3.　The setup utility starts and then takes notes of the content of the BIOS setup of present set.

　　　　4.　" F9 " is pushed, " Yes" is selected on the screen of " Is the default value loaded? ", and " Enter"

　　　　　　is pushed.

　　　　5.　" F10 " is pushed.

　　　　6.　" Yes" is selected on the screen of the setup confirmation, and " Enter" is pushed.

　　　　7.　The computer starts automatically.

　　　Attention

　　　　　・If the device which can be set is set to "Invalidity" by "Advanced" or "Security" menu, becomes an

　　　　　　error by "PC-Diagnostic utility".

　　　　　　(It is judged that the device which can be set to "Invalidity" by "Main" menu such as "Flat pad" is

　　　　　　normal if the controller operates normally though sets to "Invalidity" by the setup. )

　　　　　・In the model with built-in DVD of the USB connection, even if DVD is normal, becomes an error if

　　　　　　legacy USB is set to "Invalidity"

　1-2. When you execute an automatic test

1.　"Ctrl" + "F7" is pushed while the "Panasonic" start screen is displayed after the computer is started.

2. The test of all devices begins automatically by "PC-Diagnostic utility" 's starting.

Attention

・It is a test which the customer who bought PC can execute. (As for HDD, the enhancing test is also

possible.)

・A flat pad does not work for a while after starting "PC-Diagnostic utility".

・The movement of a flat pad might become abnormal If after RAM begins from the CPU/System

test, a flat pad will be operated in about 30 seconds. In that case,restarts pushing"Alt" + "Ctrl" +

"Del" key. Or, please start "PC-Diagnostic utility" again after doing the power supply switch in the

slide, and turning off the power supply.

1-3. When you execute the enhancing test

1. Please let me discontinue diagnosing clicking

to end an automatic test.

2. Please click on the character of "D" "PC-Diagnostic utility" on the screen while pushing both of right

"Shift" and left "Shift" keys.

3. All devices which can select the enhancing test make the setting of the enhancing test possible.

4. The district device is made"FULL" display (enhancing test).

5. The test begins clicking

*Please refer to item 4 for the error result of each test and the division of the breakdown part.

7-1

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Operation of PC-Diagnostic Utility

-Only the device which can be inspected on the entire screen is displayed.

-The item does not appear when the device of wireless LAN etc. is not physically connected.

-The movement of the item must use an arrow key or a flat pad.

-As for the device under the diagnosis, blue and yellow are alternately displayed at the left of the icon.

- The diagnosis result of the device greens at the left of the icon when it is normal, and becomes red when

abnormal.

-When the test of all devices ends, the test result is displayed under the right of the screen.

-Please click

while diagnosing when being stop on the way by the time the test of all devices ends.

when you restart "PC-Diagnostic utility".

*Each device is tested from the beginning, and it is not possible to restart on the way.

-When the test of all devices ends, the test result is displayed under the right of the screen.

7-2

Download from Www.Somanuals.com. All Manuals Search And Download.

2-1. Selection of tested device

-To test only a specific device, "Test" and "Do not test" of each device can be selected.

-The device which can select the enhancing test changes in order of "The standard is tested" and "Do not

test" whenever the device icon is clicked.

Start the standard test

Do not test

Please begin testing clicking

if the selection of the tested device ends.

2-2. "PC-Diagnostic utility" End method

When

of "Close" on the right of the screen is clicked, the computer reactivates automatically. Or, the

power supply switch is done in the slide and the power supply is turned off.

2-3. The content of the setup is returned to the setting of the user

1. Turned on the computer.

2. "F2" is pushed on the screen while "Press<F2>to enter Setup" is displayed of "Panasonic".

3. Push "F10", and on the screen of "Is the change in the setting preserved and do end?"and then "Yes"

is selected, and "Enter" is pushed.

4. The computer reactivates automatically.

5. The end option is chosen by the start menu, and the power supply of the computer is turned off.

Standard at test time

All devices other than RAM and HDD ---------- about 1 minute

RAM standard test ----------------------------------- 1 - 2 minutes

HDD standard test ----------------------------------- 2 - 3 minutes

HDD enhancing test (60GB) ---------------------- about 40 minutes

Ex.The standard when the standard <all device> is tested becomes 1+2+3=6 minutes.

■ There is greatly a difference from RAM test when the memory is increased according to the performance

of the memory occasionally.

■ Moreover, when the main body of PC under the test is a high temperature, it occasionally takes time.

■ There is greatly a difference from HDD according to the performance of the drive occasionally.

7-3

Download from Www.Somanuals.com. All Manuals Search And Download.

●To skip BIOS password

Use <Ctrl>+<F10> key to skip BIOS password or authentication of fingerprint.

This key is only for entering DIAG mode. Not available to boot the computer.

If customer set "HDD Lock", the DIAG program cannot perform HDD test.

*This key is for service purpose only. Do not disclose this information to unrelated

others.

7-6

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Wiring Connection Diagram

SPEAKER (R)

SPEAKER (L)

TS PCB

LCD

I O PCB

LED PCB

CN1001

SERIAL

SW1001

CN1002

POWER SW

CN1602

CN1603

CN1003

CN1203

CN1201

USB PCB

CN1701

INVERTER

BATTERY

PACK

CN1202

USB

CN1702

VGA

DC-IN

CN801

CN15

CN17

CN18

CN1401

JK1501

CN1501

CN802

CN21

CN1402

DC-IN PCB

DVD-ROM

DRIVE

CN23

CN6

CN7

CN24

SD PCB

CN19

CN14

PORT

REPLICATOR

CN12

FAN MOTOR

CN28

BLUETOOTH P.C.B.

LAN JACK

MODEM

CN22

MAIN PCB

CN1

CN5

CN25

CN4

USB

DIMM MEMORY CARD

MODEM

JACK

CN16

CN2

CN3

CN8

LITHIUM

BATTERY

ANTENNA

PCB L

HDD PACK

WIRELESS

MODULE

CN13

CN26

JK2

ANTENNA

PCB R

JK1

Connector by Cable

Direct connection by Connectors

Parts on Bottom Side

Headphone

PAD SW PCB

Microphone

CN1302

CN1301

SW1304

KBD FPC

SW1303

SW1301

FLAT

PAD

PCMCIA SLOT

KEYBOARD

8-1

Download from Www.Somanuals.com. All Manuals Search And Download.

9 Disassembly/Reassembly

Note:

Power off the computer. Do not shut down to the Suspend or hibernation mode.

Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.

9.1. Disassembly Instructions

9.1.1.

Preparation

9.1.3.

Removing the HDD

Before disassembling, be sure to make the following prepara-

tions.

• Shut down Windows and turn off the power.

• Disconnect the AC adaptor.

HDD Case Upper

Hook

• Remove the optional DIMM memory card and PCMCIA card

if they are connected.

• Remove other devices if they are connected.

Attention:

• Please execute writing BIOS ID when you exchange the

Hook

Main Board.

Hook

• You cannot reuse the Conductive Clothes and the heat dissi-

pating parts such as Sheet and Rubber. Use new parts.

HDD

HDD FPC

9.1.2.

Removing the Battery Pack, the

HDD Unit and the DVD-ROM Drive

Unit

HDD Damper

HDD Latch Knob

HDD Unit

Latch 2 Latch 1

Battery Pack

HDD Conductive Sheet

MP Latch

HDD Earth Plate

DVD-ROM Drive Unit

Battery Pack

1. Slide the Latch 1 to unlock. (1)

2. Slide the Latch 2 (2), and then without releasing it, slide

and remove the Battery Pack. (3)

HDD Case

HDD Unit

1. Remove the six Hooks, and remove the HDD Case

1. Slide the HDD Latch Knob (4), and then without releasing

it, slide and remove the HDD Unit. (5)

DVD-ROM Drive Unit

Upper.

2. Remove the HDD Damper.

3. Disconnect the HDD from the HDD FPC.

4. Remove the HDD Conductive Sheet and HDD Earth

Plate.

1. Push the MP Latch (6), and then without releasing it, slide

the DVD-ROM Drive Unit. (7)

9-1

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Lift the upper part of the Center Cover and draw it back-

ward, release the six Hooks fixing the front side of the

Center Cover, and then remove the Center Cover.

3. Remove the four Screws <N9> and the KBD Angle L and

9.1.4.

Removing the DIMM Memory Card

<N1>

DIMM Cover

<N1>

4. Lift the upper part of the Keyboard and draw it backward,

and then turn the Keyboard over forward.

Hook

KBD WP Sheet

Connectors

Hook

DIMM Memory Card

Connector

(CN25)

Keyboard

1. Remove the two Screws <N1>, and remove the DIMM

Cover.

2. Open the right and left Hooks of the DIMM Memory Card

outward, and remove the DIMM Memory Card.

KBD FPC

5. Remove the KBD WP Sheet.

6. Disconnect the two KBD Cables from the two Connectors

(KBD FPC).

Screws <N1>: XSB2+3FNL

9.1.5.

Removing the Keyboard

7. Remove the Keyboard.

8. Disconnect the Cable from the Connector (CN25).

9. Remove the KBD FPC,

Screws <N9>: DFHE5025XA

9.1.6.

Removing the Speaker and the LED

PCB

Sheet

Hooks

CN1002

<N9>

CN1003

1. Release the seven Hooks fixing the rear side of the Cen-

ter Cover.

Tape

LED PCB

Speaker

Holder

Tape

Center Cover

Hooks

Speaker L

Speaker

Holder

<N9>

KBD Angle L

Speaker R

<N9>

1. Remove the two Speaker Holders.

2. Remove the two tapes, and disconnect the two Speaker

Cables from the two Connectors (CN1002, CN1003)

3. Remove the Speaker L and R.

Keyboard

KBD Angle R

4. Remove the Sheet.

5. Remove the two Screws <N9>, and Remove the LED

PCB.

9-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Screws <N9>: DFHE5025XA

9.1.8.

Removing the Bottom Case

9.1.7.

Removing the Handle Ass'y

<N7>

<N8>

<N2>

<N5>

<N4>

Handle Cover L

<N7>

<N8>

Sleeves B

Handle Cover R

Sleeves A

<N7>

<N5>

Bottom Cover

Sleeves A

Handle Ass’y

Sheet

Gasket

1. Remove the six Screws <N5>.

2. Remove the ten Screws <N7>.

3. Remove the two Screws <N8>.

1. Remove the two Screws <N2>.

4. Open the Lid Rubbers and remove the Bottom Cover.

5. Remove the Sheet and Gasket.

2. Remove the three Screws <N4>, and remove the Handle

Cover L and R.

3. Remove the two Sleeves A, Handle Ass'y and two

Sleeves B.

Screws <N5>: DXSB2+6FNL

Screws <N7>: DXYN2+J16FNL

Screws <N8>: DXYN2+J8FNL

Screws <N2>: DRHM4+10FKS

Screws <N4>: DRSB2+6FKL

9-3

Download from Www.Somanuals.com. All Manuals Search And Download.

Note:

After replacing the Main Board, rewrite the BIOS ID.

9.1.9.

Removing the Wireless Module and

MDC Module

1. Disconnect the ten Cables from the ten Connectors (CN6,

CN7, CN24, CN19, CN28, CN21, CN802, CN18, CN15,

CN25).

2. Remove the six Screws <N9>.

3. Remove the Main PCB.

<N9>

Kapton Tape

Antenna Cable (Black)

Antenna Cable (Gray)

4. Remove the MP Guide.

Wireless Module

Screws <N9>: DFHE5025XA

9.1.11. Removing the PC Card Ejector and

Lithium Battery

Tape

<N9>

PC Card Ejector

(to CN14)

MDC Module

Modem Cable

1. Remove the two Antenna Cables from the two Connec-

tors.

• Antenna Cable (Black): MAIN Connector

• Antenna Cable (Gray): AUX Connector

2. Remove the two Screws <N9>.

CN14

Main PCB

3. Remove the Wireless Module.

4. Remove the two Screws <N9>.

<N9>

5. Disconnect the Modem Cable from the Connector.

6. Remove the Kapton tape and remove the MDC Module.

1. Remove the two Screws <N9>.

2. Remove the PC Card Ejector.

3. Disconnect the Cable from the Connector (CN14).

4. Remove the Lithium Battery.

Screws <N9>: DFHE5025XA

9.1.10. Removing the Main PCB

Screws <N9>: DFHE5025XA

<N9>

CN21

CN802

CN6

CN18

CN15

Main PCB

CN7

CN24

CN28

<N9>

CN19

MP Guide

CN26

9-4

Download from Www.Somanuals.com. All Manuals Search And Download.

Springs.

9.1.12. Removing the DC-IN PCB and I/O

PCB

5. Remove the three Screws <N9>.

6. Remove the SD PCB.

MODELAN

Holder

LAN Cable

Modem Cable

Screws <N5>: DXSB2+6FNL

Screws <N9>: DFHE5025XA

<N19>

DC-IN PCB

<N9>

9.1.14. Removing the BT PCB

I/O PCB

<N9>

BT P.C.B.

MODELAN-2

Holder

BT FFC

I/O Plate

1. Remove the two Screws <N9>.

2. Remove the DC-IN PCB.

3. Remove the two Screws <N9>.

4. Remove the four Screws <N19>, and then the I/O PCB

from the I/O Plate.

5. Remove the Modem Cable and LAN Cable from the

MODELAN Holders.

1. Remove the two Screws <N9>.

2. Remove the BT FFC from the Connector (CN2) and

remove the BT PCB.

Screws <N9>: DFHE5025XA

Screws <N19>: DFHE5035ZB

9.1.13. Removing the FAN Motor and SD

PCB

Cable Holder

Fan Tape2

<N5>

Fan Tape1

Fan Duct

<N9>

SD PCB

FAN Motor

Heat Sink

Spring

Heat Sink

Spring

1. Remove the Cable Holder.

2. Remove the two Screws <N5>.

3. Remove the FAN Motor.

4. Remove the Heat Sink, Fan Duct, and the four Heat Sink

9-5

Download from Www.Somanuals.com. All Manuals Search And Download.

9.1.15. Removing the USB PCB

9.1.17. Removing the LCD Front Cabinet

LCD Leg Rubber

<N9>

<N16>

LCD Leg

Rubber

CN1701

<N15>

USB PCB

LCD Front

Cabinet

LCD Unit

<N15>

1. Remove the two LCD Leg Rubbers, and then the two

Screws <N16>.

2. Remove the two Screws <N15>.

3. Release the 23 Hooks joining the LCD Front and Rear

Cabinet on the LCD Front Cabinet outward. (See the Fig-

ure),

1. Disconnect the Cable from the Connector (CN1701).

2. Remove the two Screws <N9>.

3. Remove the USB PCB.

4. Remove the LCD Front Cabinet.

Screws <N9>: DFHE5025XA

Screws <N15>: DRHM0075ZA

Screws <N16>: DXQT2+G4FCL

9.1.16. Removing the Display unit

9.1.18. Removing the LCD and the Inverter

<N6>

LCD Unit

Display Unit

Hinge

<N6>

Screw

Cover L

Gasket

Inverter

Inverter Case

<N18>

W-LAN PCB L

<N18>

LCD/INV. Cable

Hinge

Screw

Cover R

<N6>

W-LAN PCB R

<N6>

1. Remove the four Screws <N6> from the computer bottom

side.

2. Remove the two Screws <N6> from the computer upper

side.

3. Remove the Display Unit.

4. Remove the Hinge Screw Cover L and R.

5. Remove the Gasket.

LCD Rear Cabinet

Screws. <N6>: DXSB3+6FNL

9-6

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Disconnect the LCD/INV. Cable from the Connector on

the Inverter.

2. Remove the LCD Unit.

1. Remove the Palm Rest Sheet.

2. Remove the four Screws <N20>, and then PAD Base

Ass'y.

3. Remove the Inverter with the Inverter Case.

4. Remove the two Screws <N18>, and then the W-LAN

PCB L and R.

3. Disconnect the two Cables from the two Connectors

(CN1301, CN1302).

4. Remove the three Screws <N14>.

5. Remove the PAD Button WP Rubber and PAD SW PCB.

6. Remove the Touch PAD.

Screws <N18>: XQN17+BJ6FJ

9.1.19. Removing the Touch PAD and PAD

PCB

Screws <N14>: DRHM0106ZA

Screws <N20>: DXQT2+G4FCL

9.1.20. Removing the Finger PCB

Palm Rest Sheet

<N9>

Finger PCB

Pad WP Sheet A

<N9>

<N20>

PAD Base Ass’y

PAD Button

WP Rubber

Touch PAD

PAD SW PCB

FP FFC Cable

Preparation

Finger Sensor Base

CN1302

Perform the steps up to removing of the Main PCB.

1. Remove the three Screws. <N9>

2. Remove the Finger PCB and Finger Sensor Base.

<N14>

CN1301

Sheet

<N14>

Screws <N9>: DFHE5025XA

9-7

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2. Reassembly Instructions

9.2.1.

Attention when CF-74 series is repaired

• Please execute writing BIOS ID when you exchange the Main Board.

• You cannot reuse the Conductive Clothes and the heat dissipating parts such as Sheet and Rubber. Use new parts.

9.2.2.

Setting the Finger PCB

1. Fix the Finger PCB and the Finger Sensor Base to the computer using the 3 Screws <N9>.

2. Connect the FP FFC Cable to the Connector (CN27) on the Main PCB.

Screws <N9>: DFHE5025XA

Preparing and setting the Finger Sensor Base

<N9>

Finger P.C.B.

Attach the

(all circumferences) to avoid

running over the rib of Finger

Sensor Base.

(Clearance: 0 to 1 mm)

<N9>

Finger Sensor Base

Avoid catching of

the FP FFC Cable.

FS Waterproof

Sheet 2

Press the surrounding part strongly enough.

FP FFC Cable

(to Connector CN27)

Finger Sensor Base

Fit the frame of the PALMREST SHEET.

(Avoid running over.)

9.2.3.

Setting the LCD Unit and the

Inverter

LCD Unit

1. Fix the W-LAN PCB L and R to the LCD Rear Cabinet

using the two Screws <N18>.

2. Attach the Inverter with the Inverter Case to the LCD Rear

Cabinet.

3. Set the LCD Unit to the LCD Rear Cabinet.

4. Connect the LCD/INV. Cable to the Connector on the

Inverter.

Inverter

Case

Screws <N18>: XQN17+BJ6FJ

<N18>

W-LAN PCB L

<N18>

LCD/INV. Cable

W-LAN PCB R

LCD Rear Cabinet

9-8

Download from Www.Somanuals.com. All Manuals Search And Download.

Arranging the W-LAN L and R Cable

W-LAN Antenna L PCB

W-LAN Antenna R PCB

Attach the Tape to hold the Cable.

Pass the Cable through the notch

and lead it downward.

Lead the Cable along the surface.

Pass the Cable

through the notch

and lead it downward.

Attach the Tape to each of the Cables.

(Avoid overlapping.)

Pass the Cable between

the boss and rib.

Avoid overlapping of the Cables

(all the way).

Pass the Cable through the notch.

(Avoid running over the ribs.)

LCD Rear Cabnet

Pass the Cable through the notch.

(Avoid running over the ribs.)

Attaching the LCD Damper C and LCD Damper D

1. Attach the four LCD Damper C to the upper part and lower part of the LCD Unit.

2. Attach the LCD Damper D to the upper center of the LCD Unit.

LCD Damper D

0~1mm

Match the LCD Damper D to the center

of the LCD Unit.

LCD Display Side

0~1mm

LCD Unit

LCD Damper C

LCD Rear Side

LCD Damper C

A: Match the LCD Damper C by LCD edge 0~2mm

9-9

Download from Www.Somanuals.com. All Manuals Search And Download.

Arranging the LCD/TS Cable

1. Connect the LCD/TS Cable (LCD) to the Connector on the LCD Unit.

2. Connect the LCD/TS Cable (TS) to the Connector (CN603) on the TS PCB.

B: Attaching the Cloth

Cloth

Cushion

Cloth

Match the end of the Tape to the end of the EMI Sheet.

3~5mm

Tape

Cover the

Connector

Terminals

LCD Unit

Attach the Cloth along

the surface of

the Cushion.

Safety Working

using the Tape.

Turn them halfway.

*Avoid too much tension

on the Cables.

Match the end of

the Cloth to the end

of the Cushion.

TS PCB

EMI Sheet

LCD/TS Cable

Before attaching the EMI Sheet,

attach the Tape.

Fold it back and attach to the side surface.

Cloth

Ensure it does not come out

of the metal part.

Ensure the Cloth is surely

attached to the metal

chassises on both of the

side and top.

(The Cloth should catch

the metal chassieses only.

It must not catch the TAB.)

Cloth

Use the Cable covered

with the Conductive Cloth only.

Cloth

95~100mm

0~2mm

Cushion

Cloth

Corner of the Cloth

Ensure the corner of the Cloth

does not come out of the LCD's edge.

Safety Working

Attach the Cloth

along the surface

of the Cushion.

A: Match the Cloth by Cushion edge 0~1mm

9-10

Download from Www.Somanuals.com. All Manuals Search And Download.

Arranging the TP Power Cable and Attaching the TP/LCD Sheet

Ensure the Tape does not cover the Connecter port.

Connect the Connector.

TP Power Cable

Pass the Cables over

the Conductive Cloth.

0~1mm

Ensure the Tape and Cable Sheet

do not come out of the metal part.

0~2mm

Cable Sheet

0~2mm

Corner of the Conductive Cloth.

No protrusion.

Tape

Fold it back and attach

to the side suface.

Safety Working

A B

Arrange the Cable A and B

coming out of the Connector

part in the same length.

Safety Working

Setting the Inverter and Arranging the Inverter Cable

1. Insert the Inverter to the Inverter Case, and connect the Inverter Cable to the Connector on the Inverter.

2. Fix the Connector of the Inverter Cable using the Tape.

Attach the Inverter on

the two-sided tapes.

Safety Critical components

Inverter

1. Avoid any kink, twist or stress on the components.

2. Do not reuse the Inverter once you removed it

from the Inverter Case.

Inverter

Case

Match the end of the Inverter

to the mark.

Tape

Inverter Case

Safety Working

Ensure the Cables do not

come over the "a" line.

(Otherwise they push up

the front surface.)

Match the end of

the Inverter Case

to the end.

Safety Working

Inverter Cable

Pass the Cables through the notch.

Fit the surplus length

under the LCD.

Pass the Cable between the LCD and the Inverter Case.

"a" line

Ensure the portion with

the Black Tape stays on

the outlet.

Tape

Fold it back and fix it.

0~1mm

Safety Working

9-11

Download from Www.Somanuals.com. All Manuals Search And Download.

Cautions for Setting the LCD Unit

LCD Unit

Ensure the Cushion does not run

over the rib of the LCD Rear Cabinet.

(Same on the upper side.)

LCD Rear Cabinet

Safety Working

Ensure the Cushion does not run over the rib

of the LCD Rear Cabinet.

(Same on the other side.)

Pull and hold the Cables, and set the LCD.

(Avoid them from being caught inside the LCD unit.)

9-12

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.4.

Setting the LCD Front Cabinet

9.2.5.

Setting the Display unit

1. Set the LCD Front Cabinet to the LCD Rear Cabinet.

2. Fix the LCD Front Cabinet using the two Screws<N15>.

3. Fix the LCD Front Cabinet using the two Screws<N16>,

and attach the two LCD Leg Rubbers.

1. Attach the Gasket.

2. Set the Hinge Screw Cover L and R to the Hinge L and R.

3. Pass the Cables coming out of the LCD Unit into the com-

puter.

4. Fix the Display Unit using the two Screws<N6> from the

computer upper side.

5. Fix the Display Unit using the four Screws<N6> from the

computer bottom side.

Screws <N15>: DRHM0075ZA

Screws <N16>: DXQT2+G4FCL

Fixing of the LCD Front Cabinet

Screws. <N6>: DXSB3+6FNL

Ensure all the 23 Hooks are securely set in.

<N6>

LCD Leg Rubber

Display Unit

<N16>

: Hooks

<N15>

Hinge

<N6>

Screw

Cover L

Gasket

Hinge

Screw

Cover R

<N6>

LCD Front

Cabinet

LCD Unit

<N15>

<N6>

9-13

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.6.

Setting the USB PCB

1. Fix the USB PCB to the computer using the two

<N9>

Screws<N9>.

CN1701

2. Connect the USB Cable to the Connector (CN1701).

Screws <N9>: DFHE5025XA

USB PCB

Arranging the USB Cable

MP Slide Sheet

Safety Working

Attach the MP Slid Sheet to prevent the Cable from coming off.

Fitting edge

USB Cable

Pass the Cable through

the notch and lead it downward.

Connect

Fit the surplus length of

the Cable into this side.

the Connector.

Pass it through

the notch.

Tape

Ensure the Cable does not

come out of the board edge

so that the Cable does not

touch the MP Drive.

Fit the Cable between the pins.

Pass it through

the notch.

Avoid runnning over the boss.

Pass it through the rib.

MP Slide Sheet

Ensure the "A" end does not come on the level.

9-14

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.7.

Setting the BT PCB.

9.2.8.

Setting the SD PCB, Heat Sink and

FAN Motor

1. Connect the BT FFC to the Connector (CN22).

2. Fix the BT PCB to the computer using the two Screws

<N9>.

1. Connect the SD FFC to the Connector (CN1401).

2. Fix the SD PCB to the computer using the three

Screws<N9>.

3. Set the Heat Sink, Fan Duct and the four Heat Sink

Springs.

<N9>

BT P.C.B.

4. Fix the FAN Motor to the computer using the two

Screws<N5>.

5. Attach the Fan Tape 1 and 2 on the FAN Motor, and fix

the Cable Holder on them.

BT FFC

Screws <N5>: DXSB2+6FNL

Screws <N9>: DFHE5025XA

Cable Holder

Fan Tape2

<N5>

Fan Tape1

Fan Duct

<N9>

SD PCB

SD FFC

FAN Motor

Heat Sink

CN1401

Heat Sink

Spring

Heat Sink

Spring

9-15

Download from Www.Somanuals.com. All Manuals Search And Download.

Applying Grease on the Heat Sink

1. Apply grease on two points of the Heat Sink.

2. Attach the Pipe Sheet on the Heat Pipe.

Fan Dust Sheet

(Attach the Fan Duct Sheet

to the back side.)

Match the end of the Pipe Sheet.

0~1mm

(0 ~ -2mm)

0~1mm

5~10mm

Fan Dust Sheet

Pipe Sheet

Fold on the center line

and attach it.

Heat Sink

Grease is applied.

G751(10mmX10mmXt0.3)

Grease is applied.

G751(10mmX10mmXt0.3)

9-16

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.9.

Setting the DC-IN PCB and I/O PCB

1. Fit the Modem Cable and LAN Cable between the MOD-

ELAN Holders, and set them on to the computer.

2. Fix the I/O PCB to the I/O Plate using the four

Screws<N19>.

3. Fix the I/O PCB with I/O Plate to the computer using the

two Screws<N9>.

MODELAN

Holder

LAN Cable

Modem Cable

<N19>

DC-IN PCB

<N9>

I/O PCB

4. Fix the DC-IN PCB to the computer using the two

Screws<N9>.

MODELAN-2

Holder

Screws <N9>: DFHE5025XA

Screws <N19>: DFHE5035ZB

I/O Plate

Arranging the DC-IN Cable

DC-IN PCB

Safety Working

Turn the DC-IN Cable halfway

(counterclockwise)

Set the Core of the Modem

over the DC-IN Cable.

DC-IN Cable

Connect the Connector

0~3mm

FAN Cable Sheet

INV. Cable

Attach the Cable avoiding

overlapping

Avoid runnning over the boss.

(Otherwise the Cable will be caught

at the Bottom Cabinet.)

Safety Working

(DC-IN Cable and INV Cable).

Set the INV Cable under

the DC IN Cable.

Fix the Core using the Tape.

Fold back the end of Tape.

9-17

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.10. Setting the PC Card Ejector and Lithium Battery

1. Attach the Lithium Battery to the Main PCB.

Lithium Battery

(to CN14)

2. Pass the Lead Wire of the Lithium Battery through the

groove of the Main PCB, and connect it to the Connector

(CN14) on the back side.

PC Card Ejector

3. Fix the PC Card Ejector to the Main PCB using the two

Screws<N9>.

Screws <N9>: DFHE5025XA

CN14

Main PCB

<N9>

Arranging the Lithium Battery

Safety Working

Connect to the Connector (CN14) on the back side.

Pass the Cable through the groove of the Main PCB.

Match the end of the Tape.

(0 to 1 mm)

Fix the Cable using the Tape.

Match the end of the Tape.

(0 to 1 mm)

Pass the Cable between the parts.

(Avoid running over the parts.)

Tape

Main PCB

Lithium Battery

9.2.11. Setting the Main PCB

Note:

After replacing the Main Board, rewrite the BIOS ID.

<N9>

CN21

CN802

1. Set the MP Guide to the Main PCB.

2. Set the Main PCB to the computer.

3. Fix the Main PCB using the six Screws<N9>.

4. Connect the ten Cables to the corresponding Connecters

(CN6, CN7, CN24, CN19, CN28, CN21, CN802, CN18,

CN15, CN25).

CN6

CN18

CN15

Main PCB

Screws <N9>: DFHE5025XA

CN7

CN24

CN28

<N9>

CN19

MP Guide

CN26

9-18

Download from Www.Somanuals.com. All Manuals Search And Download.

Arranging the Cables to the Cable Holder and their Wiring Order

• Pull the surplus length of the Cable coming from the LCD side to inside of the unit.

(If the surplus length comes outside, it will be caught by the center cover during setting.)

• Fit the Cables to the corresponding grooves of the Cable Holder.

• Ensure the Cables in the Cable Holder are wired in the correct order.

Safety Working

Be sure to wire the Cables in the correct order.

No.8: TP Power Cable

No.9: Modem Cable

No.1: LAN Cable

Fit the portion using the Tape

in the notch.

No.2:

Black Antenna

Cable

Fit the Black Tube to the end

of the rib.

No.3:

Gray Antenna

Cable

No.4: Empty

Safety Working

Cover the Cables

using the Tape.

Fold the Tape in half

and attach it to the Cables.

No.5: I/O Cable

Cable Holder

No.7: LCD Cable with the tube

No.6: LCD Cable

Arranging the FAN Cable

Safety Working

Lead the FAN Cable into the space next to the Board.

FAN Motor

Main PCB

Tape

Fix the FAN Cable.

FAN Cable

Connector (CN28)

Connect the FAN Cable.

9-19

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.12. Setting the Wireless Module and MDC Module

1. Connect the Modem Cable to the Connector, and fix the

MDC Module to the Main PCB using the two

Screws<N9>.

<N9>

Kapton Tape

Antenna Cable (Black)

Antenna Cable (Gray)

2. Connect the Wireless Module to the Connector of the

Main PCB, and fix it using the two Screws<N9>.

3. Connect the two Antenna Cables to the two Connectors

Wireless Module

on the Wireless Module.

• Antenna Cable (Black): MAIN Connector

• Antenna Cable (Gray): AUX Connector

<N9>

Screws <N9>: DFHE5025XA

MDC Module

Modem Cable

Arranging the Modem Cable

Arranging the Modem Cable

MDC Module

Safety Working

Ensure the Cable does not run over the Screw.

Ensure the Cable does not come over the end

of the MDC Module.

Safety Working

Ensure the Kapton Tape is

overlapping the Shrink Tube

by 1 mm or more.

10–3mm

Kapton Tape

Pass the Cable over

the CCC mark.

Fix the Connector

Modem Cable

using the Tape.

Avoid any stress on

the outlet of the Cable.

Ensure both of the inlet and outlet

of the Cable are within the frame.

Fold back and attach to the back side

of the MDC Module.

Coming over the end

of the Screw.

Safety Working

Coming over the end of the Screw.

Coming outside of the frame.

9-20

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.13. Setting the Bottom Case

9.2.14. Setting the Handle Ass'y

1. Set the two Sleeves A, the Handle Ass'y and the two

Sleeves B.

1. Attach the Gasket and Sheet.

2. Set the Bottom Case.

3. Fix the Bottom Case using the ten Screws<N7>. No1 to

2. Fix the Handle Cover L and R using the two Screws<N2>.

No1, No2

No10

4. Fix the Bottom Case using the six Screws<N5>. No11 to

3. Fix the Handle Cover

Screws<N4>. No3 to No5

and

using the three

No16

5. Fix the Bottom Case using the two Screws<N8>. No17,

No18

Note:

Tighten the Screws in the numbered order (No1 to No5).

6. Close the Lid Covers.

Screws <N2>: DRHM4+10FKS

Screws <N4>: DRSB2+6FKL

Note:

Tighten the Screws in the numbered order (No1 to No18).

<N4>

<N2>:No2

Screws <N5>: DXSB2+6FNL

Screws <N7>: DXYN2+J16FNL

Screws <N8>: DXYN2+J8FNL

:No5

<N2>:No1

<N4>

:No4

<N7>:No5

<N7>:No8

<N4>:No3

<N7>:No10

<N7>

:No9

<N8>

:No18

<N7>:No4

Handle Cover R

Handle Cover L

<N5>:No12

<N5>:No11

<N7>:No3

<N8>

:No17

<N5>

:No14

Sleeves A

Sleeves B

<N5>

:No13

<N7>:No2

<N7>:No1

<N5>

:No15

Top Case

Sleeves A

<N7>:No6

<N7>:No7

Handle Ass’y

<N5>:No16

Bottom Cover

Sheet

Gasket

9-21

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.15. Setting the Speaker and the LED PCB

1. Fix the LED PCB using the two Screws<N9>.

2. Set the Speaker L and R to the computer.

3. Connect the Speaker Cable L and R to the two Connec-

tors (CN1002, CN1003) on the LED PCB.

Sheet

<N9>

CN1002

Tape

CN1003

LED PCB

Speaker

Holder

4. Fix the Speaker Cable L and R using the Tape.

5. Fix the Speaker L and R using the Speaker Holder.

6. Paste the Sheet.

Tape

Speaker L

Note:

Speaker

Holder

Ensure the three Hooks of the Speaker Holder are securely

set in the computer.

Speaker R

Screws <N9>: DFHE5025XA

Soldering the Speaker Cable and Setting the Speaker Rubber

Speaker Rubber

Speaker

Red Line

Soldering

White Line

Red Line

Speaker

White Line

Speaker Cable

Cautions for Setting the Speaker

Safety Working

Tape

Set as the loop of the Speaker Cable

is on the upper side.

Speaker

Fit to the stand wall.

Tape

Holder

SP Conductive

Cloth R

SP Conductive

Cloth L

Speaker L

Fit to

the corner.

Pass the Speaker Cables

through the notch.

(Avoid running over.)

Speaker

Holder

Speaker R

Speaker L

Speaker R

Securely attach the SP Conductive Cloth

to the round frame of the Speaker.

Ensure the Cable does not

touch the Steel Plate.

Ensure the Hooks are

securely set in. (3 points)

Pass the Speaker Cables through the notch.

(Avoid running over.)

9-22

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.16. Setting the Keyboard

1. Connect the KBD FPC Cable to the Connector (CN25) of

the Main PCB.

KBD WP Sheet

2. Connect the two Cables of the Keyboard to the two Con-

nectors on the KBD FPC.

3. Remove the Release Paper of the KBD WP Sheet, and

attach the KBD WP Sheet to the computer as it covers

the Cable of the Keyboard.

Connectors

Note:

Press strongly enough until the color of the contact of

two-sided tape is changed.

Connector

(CN25)

KBD FPC

Hooks

4. Insert the front Hooks of the Keyboard and the FPC to the

computer, and set the Keyboard to the computer.

5. Fix the KBD Angle L and R using the four Screws<N9>.

6. Hook the six front Hooks of the Center Cover to the KBD

Angle L and R.

Center Cover

Hooks

<N9>

KBD Angle L

7. Hook the seven rear Hooks of the Center Cover to the

computer, and press the Center Cover to be securely set

in.

Screws <N9>: DFHE5025XA

<N9>

Keyboard

KBD Angle R

Cautions for Setting the Center Cover

Center Cover

Push in the claws on the rear side of the dome.

(two each on the left and right)

Push until they are snapped on.

Hook with the front hooks.

(six points)

Note:

Do not allow any gaps when

aligning the front hooks.

Safety Working

When setting the Center Cover,

fit the Lead Wire in the unit and

avoid it from being caught inside

the dome.

Ensure the Cable does not

run in this area.

9-23

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.17. Setting the DIMM Memory Card and 9.2.18. Setting the HDD

1. Attach the HDD Earth Plate and HDD Conductive Sheet.

2. Connect the HDD to the HDD FPC.

3. Attach the HDD Dumper.

DIMM Cover

1. Set the DIMM Memory Card to the Main PCB.

2. Fix the DIMM Cover using the two Screws<N1>.

4. Fix the six Hooks, and attach the HDD Case.

Screws <N1>: XSB2+3FNL

HDD Case Upper

Hook

<N1>

DIMM Cover

Hook

HDD

HDD FPC

HDD Damper

Hook

DIMM Memory Card

HDD Conductive Sheet

HDD Earth Plate

HDD Case

9-24

Download from Www.Somanuals.com. All Manuals Search And Download.

9.2.19. Setting the Battery Pack, the HDD

Unit and the DVD-ROM Drive Unit

1. Set the DVD-ROM Driver Unit.

2. Set the HDD Pack.

3. Set the Battery Pack.

4. Slide the Latch 1 to the locked position.

Latch 1

HDD Unit

Battery Pack

DVD-ROM Drive Unit

9-25

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Exploded View

K59

K58

E37

K60

K78

K42

E31

E30

K69

K73

K25

K42

E30

E31

K24

K50

K78

K71

K79

K72

B N9

K30

K71

K1011

B N9

B N13

B N20

B N9

K50

K1000

K21

K82

B N9

K63

K70

E27

B N9

K19

K1403

K63

K83

K1401

K35

K23

K80

B N9

K64

K1019

E19

K61

E1003

E28

K1019

K76

K41

A N14

E28

A N14

K40

E34

K1021

K98

K1403

K65

K31

E35

E12

K74

K81

K10

K66

B N9

K77

K67

B N9

K62

K75

K1402

C N19

K1013

K47

K1403

K46

K1401

K27

K68

K1403

E1001

K45

K1403

K37

K38

A N12

K48

K28

K51

K61

E1005

E29

K1403

E32

D N2

B N9

K1403

B N9

N10

K33

E33

K43

E36

B N9

Screw tightening torque

K1014

K43

A 0.1 – 0.01 N.m

(1.0 – 0.1 kgf.cm)

D 1.2 – 0.1 N.m

K44

(12.0 – 1.0 kgf.cm)

K29

CB 0.2 – 0.02 N.m

(2.0 – 0.2 kgf.cm)

F 0.8 – 0.1 N.m

(8.0 – 1.0 kgf.cm)

K44

K39

K32

0.4 – 0.02 N.m

(4.0 – 0.2 kgf.cm)

CF-74GCDADBM

Download from Www.Somanuals.com. All Manuals Search And Download.

K53

K1401

K17

K52

E13

E38

K49

E20-1

E20

K36

E11

K34

K1403

E21

K55

K1002

N11

E10

K1024

N11

K1023

K1002

K54

K1002

K1012

K1001

E17

K1020

K1022

K56

K97

K13

K14

N10

K85

E17-2

E17-3

K95

E18

K95

K89

K92

K11

E17-5

E17-6

K18

E17-1

E17-4

E17-7

K91

K96

K90

K84

K88

K93

K86

K91

K12

K20

Screw tightening torque

K94

0.2 – 0.02 N.m

(2.0 – 0.2 kgf.cm)

K15

0.13 – 0.01 N.m

(1.3 – 0.1 kgf.cm)

K57

K1018

CF-74GCDADBM

Download from Www.Somanuals.com. All Manuals Search And Download.

K212

K210-6

K211

K205

K210

E14

K210-1

K210-2

E14-1

K26

N18

K16

K1401

N17

K1401

E15

K1401

E26

K210-3

K1401

E15-1

N18

K210-5

K210-4

K1015

E25

K1401

K201

K210-5

K207

E22

K1403

K207

N20

K1401

K204

K208

K209

E23

K204

K203

K206

E24

Screw tightening torque

K207

0.1 – 0.01 N.m

(1.0 – 0.1 kgf.cm)

N15

K202

0.2 – 0.02 N.m

(2.0 – 0.2 kgf.cm)

0.8 – 0.1 N.m

(8.0 – 1.0 kgf.cm)

N15

0.375 – 0.025 N.m

(3.75 – 0.25 kgf.cm)

CF-74GCDADBM

Download from Www.Somanuals.com. All Manuals Search And Download.

K1016

a _E22

E22-4

E22-2

E22-1

E22-5

E22-4

E22-6-4

E22-6-3

E22-4

E22-3

E22-4

E22-6

E22-6-4

E22-6-6

E22-6-5

E22-6-2

E22-6-1-1

E22-6-1

E22-6-5

CF-74GCDADBM

Download from Www.Somanuals.com. All Manuals Search And Download.

Replacement Parts List

Note : Important Safety Notice

Components identified by

mark have special characteristics important for safety.

When replacing any of these components, use only manufacturer's specified parts.

CF-74GCDADBM

REF. NO and　AREA

NRP: Non Reusable Parts.

PART NO.

DESCRIPTION

Q'TY

Main Block Unit

DL3U11600AAA

DL3U21600AAA

DL3U31600AAA

DL3U41600AAA

DL3U51600AAA

DL3UP1602AAA

DL3U11501AAA

DL3U21501AAA

N5ZZ00000128

N5HAZ0000016

N5HZC0000031

DFJS996XA

RTL

PCB, MAIN

PCB, IO

PCB, LED

PCB, USB

PCB, DC-IN

PCB, TOUCH SCREEN

CF74 SUB PCB UNIT(SD)

CF74 SUB PCB UNIT(PAD SWITCH)

SO-DIMM

E10

MODEM

E11

E12

WIRELESS LAN MODULE

CABLE MODEM ASSY

LITHIUM COIN BATTERY

WLAN ANT PCB UNIT

E13

E14

BR-2330A/SF

DL3UB1514AAA

DFJS985ZA

NRP

RTL

E14-1

E15

CABLE ANTENNA L (Black)

WLAN ANT PCB UNIT

DL3UG1514AAA

DFJS817YA

RTL

E15-1

E17

CABLE ANTENNA L (Gray)

HDD MOUNTINGK IT

CF74 HDD FPC UNIT

HDD CASE UPPER

HDD DAMPER

DFWV99A0115

DL3UP1500AAA

DFHM0383ZA

DFHR3B92ZB

DFHR6200ZB-0

DFHR6203ZA

E17-1

E17-2

E17-3

E17-4

E17-5

E17-6

E17-7

E18

E19

E20

E20-1

E21

E22

E22-1

E22-2

E22-3

E22-4

E22-5

E22-6

E22-6-1

E22-6-1-1

E22-6-2

E22-6-3

E22-6-4

E22-6-5

E22-6-6

E23

HDD CASE

HOLDER HDD CN

HDD CONDUCTIVE SHEET B

DFHE1027ZA

NRP

DFMC0872ZA

N3CAYYY00020

DL3UP1499AAA

DFWV78A0266

DFHR9119ZA

DL3UP1260BAA

DFWV08A0081

DL3DE0179AAA

DFHR3C55ZA

DFHR3H23ZA

DFHR3C57ZA

DFHR3D14ZA

DFWV84A0269

DL3DV0179BAA

DFHR9068ZA

DFHR3243ZA

DFHR3244ZA

DFHR3245ZA

DFHR3408ZA

DFMX0778ZA

DFJS998XA

HDD EARTH PLATE

HDD

CF74 KBD FPC UNIT

DRIVE, DVD-ROM & CF-R/RW

BEZEL ASSY

MP DRIVE FPC UNIT

LCD UNIT ASS'Y

LCD PREPARATION UNIT

LCD DAMPER A

LCD DAMPER B

LCD DAMPER C

LCD DAMPER D

TOUCH SCREEN PANEL KIT

TP PREPARATION UNIT

PROTECTIVE FILM

LCD SHEET A

NRP

LCD SHEET HDN

LCD SHEET SIDE

TP SHEET

SHEET

CABLE LCD＋TP

CABLE TP POWER

INVERTER

CABLE INVERTER

TOUCHPAD

FFC. PAD

FFC SD

SPEAKER

CABLE SPEAKER R

CABLE SERIAL

E24

E25

E26

E27

E28

E29

E30

E31

DFJS993XA

N0GF1J000010

DFJS988ZA

N2EAYYY00005

DFJK12T050DB

DFJK20T040DB

L0AA02A00043

DFJS991ZA

NRP

E32

DFJS997YA

Download from Www.Somanuals.com. All Manuals Search And Download.

E33

E34

E35

E36

E37

E38

E1001

E1003

E1005

UDQFRPH32

DFJS995YA

DFJS987ZA

DFJS992XA

N2ABZJ000033

K1NB94BA0001

DL3UP1505AAA

DL3UP1517AAA

DFJK10T053DB

FAN

CABLE LAN ASSY

CABLE DC IN

CABLE USB

KEYBOARD US

PC CARD EJECTOR

CF74 BT PCB UNIT

BLUETOOTH ANTENNA UNIT

FFC

RTL

Accessories

CF-AA1683AM3

N4HUNTA00002

DFQW5047ZA

K2CG3DR00003

DFJS954ZA

AC ADAPTOR

LITHIUM ION BATTERY PACK

MANUAL

AC CORD

MODEM CABLE

TOUCHPANEL CLOTH

PEN

DFHS9017ZA

DFHR6207ZA

Packing Material

DFPK1182YA

DFPK1185ZA

DFPE0827ZA

DFPN0834ZA

DFPN0835ZA

PACKING CASE

ACCESSORY BOX

HOLDER

CUSHION T

CUSHION B

Mechanical Parts

DFUQ0110ZB

DFMD7A65ZA-0

DFMD7A83ZA

DFMD7A84ZA

DFMD9098ZC

DFMC0670YA

DFMX0778ZA

DFMX1223ZA

DFMY5036YA

DFMX0937ZA

DFHG1815XA-0

DFHG1905YA-0

DFHG1819YA-0

DFHG1831YA-0

DFHG1850ZB-0

DFHG1857ZA

DFHG6034ZB

DFHM0386ZB-0

DFHM0388ZA

DFHM0390ZB-0

DFHM0395ZB

DFHE0890ZA

DFHE0991ZA

DFHE0992ZA

DFKE0822XA-0

DFKE0824ZB-0

DFKE0825ZC-0

DFKE9082ZA-0

DFHR3C29ZA

DFHR3C60ZA

DFHR3C65ZA

DFHR3C70ZA

DFHR3C91ZB

DFHR3D05ZA

DFHR3D06ZA

DFHR3D08ZA

DFHR3D10ZA

DFHR3D13ZA

DFHR6204ZA

DFHR6205ZA

DFHR6211ZA

DFHR6213ZB

HEAT SINK SPRING

DIMM COVER

HINGE SCREW COVER L

HINGE SCREW COVER R

KENGSINTONG PLATE ASSY

GASKET

INSULATION SHEET

INSULATION SHEET JACK

HEATSINK

DC JACK CUSHION

I/O COVER

SD USB1 COVER

USB COVER

PEN HOOLDER L OUTER

COVER 1

ANTENNA COVER CUSHION

MP GUIDE

IO COVER PLATE

KBD ANGLE

NRP

K10

K11

K12

K13

K14

K15

K16

K17

K18

K19

K20

K21

K23

K24

K25

K26

K27

K28

K29

K30

K31

K32

K33

K34

K35

K36

K37

K38

K39

K40

K41

K42

K43

NRP

PC COVER PLATE

KBD ANGLE L

NRP

CONDUCTIVE TAPE

CONDUCTIVE CLOTH SP L

CONDUCTIVE CLOTH SP R

ANT COVER NO ANT

HANDLE COVER L

HANDLE COVER R

HANDLE ASSY

KB WATER PROOF A

FAN CABLE SHEET

SD SHEET

MP SLIDE SHEET TOP

SHEET LED POWER

PWB 5LED SHEET

2FFC INSULATION

ADHESIVE TAPE FAN1

ADHESIVE TAPE FAN2

FAN DUCT SHEET

MODELAN-2

NRP

MODELAN

SPEKAER HODLER

SLEEVE A

Download from Www.Somanuals.com. All Manuals Search And Download.

K44

K45

K46

K47

K48

K49

K50

K51

K52

K53

K54

K55

K56

K57

K58

K59

K60

K61

K62

K63

K64

K65

K66

K67

K68

K69

K70

K71

K72

K73

K74

K75

K76

K77

K78

K79

K80

K81

K82

K83

K84

K85

K86

K88

K89

K90

K91

K92

K93

K94

K95

K96

K97

K98

K201

K202

K203

K204

K205

K206

K207

K208

K209

K210

K210-1

K210-2

DFHR6214ZB

DFHR6221ZA

DFHR6234YB

DFHR6235ZA

DFHR6242ZA

DFHR9122ZA

DFHG1818ZA-0

DFHM0387ZB

DFHR3F89ZA

DFGT0944YA

DFKE0709YA-0

DFKE0710ZA-0

DFHR6222ZA-0

DFGT1247YA

DFQT0045ZA

DFQT9974ZA

DFQT0048ZA

DFMC0855ZA

DFMC0859ZA

DFHE0513ZA

DFHE0790ZA

DFKM0497ZC-0

DFGL0145YA-0

DFGL0146ZA-0

DFGX0438ZA-0

DFGX9023ZB-0

DFGX0434YA-0

DFGE0132ZB-0

DFBC0316ZA-0

DFHR3B96ZB-0

DFHR3C30ZA

DFHR3C63ZA

DFHR3C98ZA

DFHR3D11ZA

DFHR3D43ZA

DFHR3D48ZA

DFHR3D49ZA

DFHR3D50ZA

DFGX9024YC-0

DFHR3B95YA

DFUQ0105ZA

DFMD7B44ZA

DFHE0326XA

DFHG1832YA-0

DFHG1839ZB-0

DFHG1840ZB-0

DFHG370ZA-1

DFKF0264ZE-0

DFHR3C64ZC

DFHR3C99ZA

DFHR3D15YA

DFHR6202ZA-0

DFHR6209ZA

DFHE0997ZA

DFMX1284ZA

DFKF0266ZA-0

DFHR3599ZA

DFHG1399XA-0

DFHR3C84ZA-0

DFMX0778ZA

DFHE0277ZA

DFHE0418ZA

DFHE0465ZA

DFKM9035YD-0

DFUQ0095ZA

DFDF3147ZA

SLEEVE B

LED LENZ POWER

CABLE HOLDER

FAN DUCT

JACK SPACER

HDD GUIDE ASSY

SPEAKER RUBBER

IO PLATE

MCH SHEET

MP SET LABEL

MP BOTTOM

MP CABINET TOP

MP LATCH

INFORMATION LABEL

ENERGY STAR LABEL

WINDOWS XP LABEL(NOTE)

CENTRINO CORE2DUO LABEL

USB GASKET

FINGER STICK

EMI SHEET B

USB GASKET

TOP CASE

INDICATOR SHEET B

INDICATOR SHEET SD

FIN COVER

CENTER COVER ASSY

BT ANT COVER

CENTER COVER NET

POWER SW BUTTON

PALMREST SHEET

KB WATER PROOF B

MP SLIDE SHEET

KBD WP FIN

PC CARD SHEET

CENTER COVER SPACER

PAD WP SHEET A

PAD WP SHEET B

PAD WP SHEET C

PAD BASE ASSY

PAD BUTTON WP SHEET

LOCK SPRING HDD

HDD LOCK SPRING HOLDER

DIMM COVER GASKET

PEN HOLDER R OUTER

LEG LEFT

LEG RIGHT

FOOT RUBBER

BOTTOM CASE

NO SC SHEET

NO SC CUSHION

PEN FRICTION SHEET

HDD LATCH KNOB

PEN HOLDER

GASKET

INVERTER CASE 74

LCD FRONT

NRP

TP/LCD SHEET

LCD LEG RUBBER

PANASONIC BADGE

INSULATION SHEET

GASKET

LID MAGNET

EMI SHEET 5

LCD REAR ASSY

LCD LATCH SPRING

LCD LATCH SHAFT

NRP

Download from Www.Somanuals.com. All Manuals Search And Download.

K210-3

K210-4

K210-5

K210-6

K211

DFBH3045YB

DFBH3046YB

DXSB3+6FNL

S DFKE0830YA-0

DFGX0432ZB-0

DFGX0433ZA-0

DFHE1024ZA

DFHE1026ZA

DFHR7518ZA

DFHR3G18ZA

DFMX0709ZA

DFMY0463ZA

DFMY0465ZA

DFHR3862ZA

DFHR3D73ZA

DFQT0050ZA

DFHR3D67ZA

DFMC0888ZA

DFHR3827ZA

DFMY3239ZB

DFMX1286ZA

DFMY3228ZA

TPD-X0033A

TPD-X0034A

HINGE L

HINGE R

SCREW

LCD LATCH

ANTENNA COVER C

ANTENNA COVER L

GASKET-81TS10-2.5-145

GASKET-81TL15-14-10

SHEET

BIS HEAD SHEET

INSULATION SHEET

MCH THERMAL RUBBER

HEAT INSULATING SPONGE

TAPE

LCD CABLE SHEET

COA LAMINATE SHEET LARGE

BATT SHEET

MP GASKET S

PROTECT TAPE

K212

K1000

K1001

K1002

K1011

K1012

K1013

K1014

K1015

K1016

K1018

K1019

K1020

K1021

K1022

K1023

K1024

K1401

K1402

K1403

NRP

DIMM THERMAL SHEET

2ND DIMM INSULATION

MCH THERMAL PLATE

*TAPE (19mmX30mm)

*TAPE (19mmX50mm)

*TAPE (10mmX30mm)

* TPD-X0033A and TPD-X0034A are provided as a

50Meter-Roll.

XSB2+3FNL

SCREW

DRHM4+10FKS

DRHM5025YA

DRSB2+6FKL

DXSB2+6FNL

DXSB3+6FNL

DXYN2+J16FNL

DXYN2+J8FNL

DFHE5025XA

DRQT2+E8FKL

DFHE5067YA

DXHM0056ZA

DXQT2+E6FNL

DRHM0106ZA

DRHM0075ZA

XQN17+BJ5FJK

XQN17+BJ6FJ

DFHE5035ZB

DXQT2+G4FCL

N10

N11

N12

N13

N14

N15

N17

N18

N19

N20

NRP

Download from Www.Somanuals.com. All Manuals Search And Download.

Replacement Parts List

Note: Important Safety Notice

Components identified by

mark have special characteristics important for safety.

When replacing any of these components use only manufacturer's specified parts.

CF-74GCDADBM

PART NO.

REF. NO and AREA

DESCRIPTION

Q'TY

MAIN PCB

1, 2, 3, 4, 5, 7, 50, 51,

55, 81, 95, 96, 97, 99,

101, 103, 105, 106, 116,

117, 119, 120, 123, 124,

125, 126, 149, 152, 158,

159, 160, 161, 163, 166,

169, 170, 173, 184, 187,

202, 203, 204, 205, 206,

207, 208, 209, 215, 216,

217, 218, 219, 220, 221,

223, 225, 226, 228, 229,

230, 231, 234, 235, 236,

237, 241, 246, 247, 248,

250, 251, 263, 266, 281,

282, 286, 287, 288, 291,

296, 297, 298, 300, 301,

F1G1C104A042

CAPACITOR, 16V, 0.1µF

158

304, 306, 308, 309, 310,

311, 314, 347, 349, 351,

352, 353, 356, 357, 358,

365, 372, 373, 389, 397,

400, 401, 402, 403, 406,

412, 417, 428, 431, 432,

433, 446, 447, 450, 451,

453, 456, 457, 458, 459,

460, 461, 462, 463, 464,

467, 470, 473, 477, 481,

482, 483, 489, 504, 505,

506, 510, 512, 519, 526,

529, 535, 536, 537, 538,

539, 540, 541, 542, 861,

6, 71, 88, 89, 155, 174,

C 175, 386, 517, 840, 854,

EEFCX0D221R

CAPACITOR, 2V, 220µF

859, 937, 975

11, 12, 13, 14, 15, 16,

17, 18, 20, 21, 22, 23,

24, 25, 26, 27, 28, 29,

30, 31, 32, 33, 34, 35,

37, 38, 39, 40, 41, 42,

43, 44, 45, 64, 85, 86,

93, 94, 102, 109, 115,

C 118, 121, 122, 150, 151,

157, 171, 177, 186, 199,

200, 201, 211, 213, 243,

245, 265, 269, 271, 283,

307, 326, 385, 387, 421,

484, 490, 495, 496, 503,

515, 520, 525, 532, 544,

F1J0J106A016

CAPACITOR, 6.3V, 10µF

818 819 831 845 863

46, 262, 264, 302, 303,

305, 398, 399, 410, 416,

418, 424, 832, 834, 844,

847, 849, 851, 869, 882,

F1G1H102A496

CAPACITOR, 50V, 1000pF

953, 954, 955, 961, 963,

970

83, 179, 498, 499, 500,

501, 513

84, 182, 183, 324, 335,

391, 507, 508, 518, 523

F1G0J474A001

F1G0J224A001

CAPACITOR, 6.3V, 0.47µF

CAPACITOR, 6.3V, 0.22µF

87, 90, 154, 180, 181,

C 185, 254, 394, 442, 455,

479, 480, 485, 502, 514

F1G0J105A001

CAPACITOR, 6.3V, 1µF

Download from Www.Somanuals.com. All Manuals Search And Download.

108, 143, 144, 145, 146,

147, 148, 176, 238, 239,

C 318, 319, 320, 321, 322,

323, 336, 348, 388, 426,

429, 434, 436, 471, 472

C 110, 382, 383, 384

F1G1A104A014

CAPACITOR, 10V, 0.1µF

F1H2A103A020

F1G1H180A542

CAPACITOR, 100V, 0.01µF

CAPACITOR, 50V, 18pF

C 127, 128

132, 133, 134, 138, 172,

191, 192, 195, 196, 252,

274, 367, 371, 374, 375,

C 392, 407, 419, 445, 452,

492, 493, 494, 808, 823,

864, 888, 889, 891, 920,

F1G1E103A062

CAPACITOR, 25V, 0.01µF

924

153, 197, 214, 222, 227,

242, 256, 267, 268, 272,

C 276, 277, 312, 317, 325,

390, 440, 497, 865, 923,

926, 956, 957, 958, 964

C 167, 313, 430, 435, 960

F1H1A1050015

CAPACITOR, 10V, 1µF

F1G1H1010005

F1J0J226A051

CAPACITOR, 50V, 100pF

CAPACITOR, 6.3V, 22µF

178, 188, 338, 487, 488,

491, 509, 511, 521, 533

C 193, 194

C 210, 232

C 244

C 249

C 261

C 273, 275, 360, 393

C 285

C 289, 290, 292, 293

C 299, 316, 327, 328

361, 362, 363, 364, 366,

C 368, 369, 370, 833, 846,

850, 872, 878, 971

C 379, 380, 466, 468

C 408, 409, 437

C 415

F1G1H1R0A543

F1G1H5R0A452

F1G1C473A004

F1L3D102A003

EEFUD0J151ER

F1G1H221A496

F1G1H330A542

F1J1E105A080

F1L0J107A016

CAPACITOR, 50V, 1pF

CAPACITOR, 50V, 5pF

CAPACITOR, 16V, 0.047µF

CAPACITOR, 2000V, 1000pF

CAPACITOR, 6.3V, 150µF

CAPACITOR, 50V, 220pF

CAPACITOR, 50V, 33pF

CAPACITOR, 25V, 1µF

CAPACITOR, 6.3V, 100µF

F1G1H100A544

CAPACITOR, 50V, 10pF

F1L1H220A066

F1G0J334A001

F1G1A683A014

EEFCX0D331R

F1G1E472A062

F1H1A225A039

CAPACITOR, 50V, 22pF

CAPACITOR, 6.3V, 0.33µF

CAPACITOR, 10V, 0.068µF

CAPACITOR, 2V, 330µF

CAPACITOR, 25V, 4700pF

CAPACITOR, 10V, 2.2µF

C 422, 454

C 425

C 438, 439

802, 803, 809, 813, 814,

816, 836, 867, 876, 900,

927, 931, 932, 934, 938,

F1L1E226A094

CAPACITOR, 25V, 22µF

950, 951

C 810, 812

F1J1E224A081

F1H1H1830001

CAPACITOR, 25V, 0.22µF

CAPACITOR, 50V, 0.018µF

820, 935, 936, 939, 940,

959

C 822, 972

C 825, 826, 827, 829

C 837, 858

F1G1H471A496

EEFSX0D331ER

F1H1H182A748

CAPACITOR, 50V, 470pF

CAPACITOR, 2V, 330µF

CAPACITOR, 50V, 1800pF

838, 855, 856, 874, 877,

965, 974

F1H1C224A074

CAPACITOR, 16V, 0.22µF

839, 857, 873, 903, 906,

C 918, 925, 928, 930, 933,

945

F1H1H104A748

CAPACITOR, 50V, 0.1µF

C 843, 853, 977, 978

C 860, 976

C 862

C 866, 871

C 868, 881

C 870

C 883, 884

C 898

C 899, 952

C 904

F1K1E1060001

F1H1H472A748

EEFCD0D101ER

F1G1H821A496

F1H1H103A748

EEFCX0G151R

EEFCX0J101R

F1G1E223A062

F1G1H222A496

F1J1E105A009

F1G1H152A496

F1G1H390A542

F1G1H271A496

F1H1H562A748

F1G1H121A495

CAPACITOR, 25V, 10µF

CAPACITOR, 50V, 4700pF

CAPACITOR, 2V, 100µF

CAPACITOR, 50V, 820pF

CAPACITOR, 50V, 0.01µF

CAPACITOR, 2V, 150µF

CAPACITOR, 6.3V, 100µF

CAPACITOR, 25V, 0.022µF

CAPACITOR, 50V, 2200pF

CAPACITOR, 25V, 1µF

CAPACITOR, 50V, 1500pF

CAPACITOR, 50V, 39pF

CAPACITOR, 50V, 270pF

CAPACITOR, 50V, 5600pF

CAPACITOR, 50V, 120pF

C 929

C 941

C 942

C 943

C 944

Download from Www.Somanuals.com. All Manuals Search And Download.

C 962

C 966

C 967

C 968

C 969

CF 1, 2, 3

CN 2

CN 3

CN 4

CN 5

F1G1H181A495

F1G1H561A496

F1G1H151A495

F1G1H470A542

F1G1H331A496

D4CC1103A038

K1MYL0B00004

K1MYL0B00005

K1KA02BA0014

K1MY52BA0190

K1KA08BA0014

K1MN20BA0134

K1NAF0D00003

K1KB12A00099

K1KY42B00001

K1KA62B00003

K1KA06BA0014

K1FY104BA024

K1KY50AA0103

K1KA05BA0014

K1KB40AA0049

K1MN10BA0134

K1FY165EA001

K1KA30BA0060

K1MN30AA0018

K1MN12BA0160

K1KA02BA0085

K1KA10B00213

K1KA06BA0128

MA2J72900L

CAPACITOR, 50V, 180pF

CAPACITOR, 50V, 560pF

CAPACITOR, 50V, 150pF

CAPACITOR, 50V, 47pF

CAPACITOR, 50V, 330pF

THERMISTOR

CONNECTOR

CONNECTOR, DIMM

CONNECTOR

CONNECTOR, USB

CONNECTOR

DIODE

CN 6, 21

CN 7

CN 8

CN 12

CN 13

CN 14

CN 15

CN 16

CN 17

CN 18

CN 19

CN 22, 27

CN 23

CN 24

CN 25

CN 26

CN 29

CN 801

CN 802

D 2, 3, 9, 23, 42

D 4

MA3J741E0L

10, 806, 807, 809, 810,

812, 840, 845, 846

12, 13, 14, 15, 16, 17,

18, 21, 22, 24, 837, 838,

B0JCMD000014

B0ADDH000004

DIODE

D 19, 20, 34

D 33, 821, 823, 824

D 38

D 39

D 40

B0KB00000044

MA2S111-TX

B3ABB0000210

B3AGB0000040

B3ADB0000065

DIODE

801, 804, 827, 828, 829,

830, 835, 836

D 805, 808, 811

813, 814, 815, 816, 817,

B0JCPD000023

B0ADCJ000025

MAZ80620ML

DIODE

818, 819, 841

D 820

D 825

D 826

D 832

D 833, 834

F 1, 2, 4, 5, 10

F 3

B2ABAM000002

MAZ81800ML

MAZ81200ML

B0JDRE000007

B0JDBE000002

K5H202Z00005

K5H402Z00003

K5H153A00001

DIODE

FUSE, 2A, 32V

FUSE, 4A, 32V

FUSE, 15A, 65V

F 800, 801, 802

1, 5, 6, 7, 8, 9, 10, 11,

12, 13, 14, 15, 16, 17,

FL 18, 19, 20, 21, 22, 23,

24, 25, 26, 27, 28, 29,

31, 33, 34, 35, 36, 37

FL 2, 3, 4

38, 39, 40, 41, 42, 43,

FL 44, 45, 46, 47, 48, 49,

50, 51, 52, 53, 54, 55

IC 1

F1H0J1050022

CAPACITOR, 6.3V, 1µF

J0JDC0000038

F1J0J4750019

CHIP BEADS

CAPACITOR, 6.3V, 4.7µF

C2GBD0000033

C1CB00002734

C0JBBZ000319

C0JBAZ002192

C0JBAA000362

C1CB00002732

CPU

IC 2

IC 6

IC 7

TEMPERATURE SENSOR

PLL

IC, LOGIC

LAN CONTROLLER

IC 9, 32, 42, 63, 71, 86, 819

IC 10

Download from Www.Somanuals.com. All Manuals Search And Download.

IC 11

IC 12

IC 13

IC 15

IC 16

IC 17

IC 18

IC 20

IC 21

IC 22

IC 23

IC 26

IC 27, 28

IC 29, 46, 74

IC 30, 84

IC 33

IC 35, 812

IC 36, 87

IC 37

IC 39, 40, 44

IC 47

IC 51

IC 56

IC 73

IC 76, 807, 809

IC 78

IC 81

C3EBFY000002

C0DBEFE00003

C1CB00002478

C0DBZYY00271

C0DBZYY00016

C1CB00002278

C0ZBZ0000978

C3FBLY000024

C1CB00002268

C0CBCBC00137

C2CBJA000003

C1AB00002507

C0JBZZ000383

C0DBZYY00026

C0JBAB000624

C0JBAE000321

C0JBAB000621

C0JBAR000500

C0JBAA000254

C0EBE0000459

C0JBAA000380

C0CBCBC00181

C1CB00002723

C0JBAZ002422

C0DBALH00003

C1CB00002740

C0DBGYY00423

C1CB00002741

C0DBGYY00422

C0DBZYY00265

C0DBZYY00017

C1CB00002733

C0DBAYY00281

C0DBAYY00282

C0DBEFH00002

C0EBE0000333

C0JBAD000195

C0ABZA000047

C0ABBA000093

C0DBDJH00009

K2HC1YYB0040

SERIAL EEPROM

IC, LAN SWITCH

IC, SUPER I/O

IC, SPI FLASH MEMORY

IC, SECURITY CHIP

IC, REGULATOR

IC, MICON

IC, AUDIO POWER AMPLIFIER

IC, USB POWER SW

IC, LOGIC

IC, SWITCH

GATE LOGIC

CARDBUS CONTOLLER

IC, FET SWITCH

CHIPSET

IC, LINEAR REGULATOR

CHIPSET ICH8M

IC, LINEAR REGULATOR

POWER MANAGEMENT SWTICH

AUDIO CODEC

DC/DC CONTROLLER FOR CPU

DC/DC CONTROLLER FOR GMCH

IC, REGULATOR

IC, AMP

IC 82

IC 85

IC 88

IC 89

IC 90

IC 804

IC 805

IC 808

IC 810

IC 811

IC 815

IC 817

IC 818

JK 1, 2

IC, OP AMP

IC, LINER

AUDIO JACK

3, 5, 7, 11, 22, 23, 35,

36, 50, 51, 53, 54, 60,

J0JJC0000021

INDUCTOR

L 8, 9

J0MAB0000169

J0JDC0000105

J0MAB0000200

ERJ2GE0R00X

ERJ2GEJ510X

DDB5Z021D-Y

ERJ2GEJ470X

G1C1R0Z00002

ERJ6GEYJ101V

G1C1R0MA0076

G1C91NM00001

G1C100K00011

DDAZR100KTD

J0JDC0000044

G1AR56PA0001

G1C4R7MA0022

G1C2R8MA0022

DDAZS100MT3T

J0JKC0000007

G1A160H00001

G1CR82M00006

D4FB1R100009

2SB0766ARL

INDUCTOR

CHIP BEADS

INDUCTOR

RESISTOR, 1/16W, 0Ω

RESISTOR, 1/16W, 51Ω

CHIP BEADS

RESISTOR, 1/16W, 47Ω

INDUCTOR

RESISTOR, 1/10W, 100Ω

INDUCTOR

CHIP BEADS

INDUCTOR

COIL

SWITCH

L 10, 30, 43

L 12, 20, 21, 34, 44, 45

L 13, 14, 15, 16

L 24, 25

L 37, 38, 39, 40, 41, 42

L 46

L 47, 48

L 52

L 57, 58

L 59

L 62

L 63

L 64, 69, 70, 71, 72, 73

L 801, 802

L 803, 805, 807

L 804

L 806, 812

L 808, 809

L 810

L 811

PA 1, 2

Q 4

TRANSISTOR

Download from Www.Somanuals.com. All Manuals Search And Download.

9, 22, 23, 24, 45, 82,

103, 817, 824, 827, 830,

Q 832, 833, 834, 836, 837,

838, 852, 870, 871, 873,

879, 880, 889, 897

B1GBCFNN0042

TRANSISTOR

12, 94, 104, 844, 846,

851, 854, 855, 892

Q 19, 21

20, 43, 46, 56, 71, 75,

B1GBCFJN0037

XP0421300L

TRANSISTOR

B1MBDCA00004

77, 99

25, 47, 48, 67, 76, 80,

Q 81, 809, 815, 816, 819,

825, 826, 866, 881, 896

Q 27, 84

Q 28, 29, 30, 31, 32, 33, 34

Q 69, 70, 100, 869, 874

Q 79, 829, 845, 847, 853

Q 801, 807

B1CFGD000023

TRANSISTOR

B1DHDC000028

XP0411500L

B1GFCFNN0019

B1GDCFNN0031

B1CFRD000009

B1CFRD000020

TRANSISTOR

FET

Q 802, 805, 806, 808

811, 812, 814, 818, 822,

823, 841, 842, 894, 895

B1CFRD000014

FET

Q 813, 821, 828, 893

Q 849, 875, 876, 882

Q 850, 885

Q 863, 864

Q 883

B1MBFDG00001

B1CHRD000001

B1GFCFJN0016

B1DHDD000031

B1MBEDA00008

FET

TRANSISTOR

TRANSISTOR, FET

TRANSISTOR

2, 3, 62, 63, 66, 121,

156, 159, 227, 330, 337,

ERJ2GEJ102X

RESISTOR, 1/16W, 1KΩ

R 6, 7, 28, 462, 463

R 8, 9

R 10, 11, 34, 35

R 12, 26

ERJ2RKF1000X

ERJ2RKF27R4X

ERJ2RKF54R9X

ERJ2RKF2001X

RESISTOR, 1/16W, 100Ω

RESISTOR, 1/16W, 27.4Ω

RESISTOR, 1/16W, 54.9Ω

RESISTOR, 1/16W, 2KΩ

13, 27, 459, 497, 498,

563, 565, 912

R 17

ERJ2RKF1001X

D1H85104A024

RESISTOR, 1/16W, 1KΩ

RESISTOR ARRAY

18, 93, 429, 465, 566,

568, 569, 829, 830, 843,

844, 849, 850, 865, 870,

ERJ2GEJ100X

RESISTOR, 1/16W, 10Ω

872, 877

R 19, 916, 925, 927, 968

R 20, 24, 244, 265

R 21

R 22

R 25

ERJ2GEJ562X

ERJ2GEJ560X

ERJ2GEJ240X

ERJ2RKF56R0X

ERJ2RKF68R0X

ERJ2RKF2210X

ERJ2RKF24R9X

RESISTOR, 1/16W, 5.6KΩ

RESISTOR, 1/16W, 56Ω

RESISTOR, 1/16W, 24Ω

RESISTOR, 1/16W, 56Ω

RESISTOR, 1/16W, 68Ω

RESISTOR, 1/16W, 221Ω

RESISTOR, 1/16W, 24.9Ω

R 29

R 30, 55, 145, 162

36, 202, 492, 493, 544,

R 545, 582, 583, 822, 823,

824, 825, 967

ERJ3GEY0R00V

RESISTOR, 1/16W, 0Ω

37, 308, 453, 456, 457,

494, 495

R 38, 39

ERJ2GEJ1R0X

ERJ2RKF20R0X

RESISTOR, 1/16W, 1Ω

RESISTOR, 1/16W, 20Ω

48, 49, 107, 211, 238,

R 310, 317, 364, 365, 385,

404, 407, 411, 412

R 50, 881

R 51, 52, 53

R 54

ERJ2GEJ330X

RESISTOR, 1/16W, 33Ω

ERJ2RKF1301X

ERJ2RKF75R0X

ERJ2RKF2371X

RESISTOR, 1/16W, 1.3KΩ

RESISTOR, 1/16W, 75Ω

RESISTOR, 1/16W, 2370Ω

56, 57, 285, 295, 297,

810, 816, 835, 876

61, 94, 140, 245, 327,

415, 428, 441

ERJ2RKF1002X

D1H81034A024

RESISTOR, 1/16W, 10KΩ

RESISTOR ARRAY

R 80, 84

R 81, 82, 83, 85, 86, 87

D1H85604A024

D1HA56080001

RESISTOR ARRAY

Download from Www.Somanuals.com. All Manuals Search And Download.

91, 116, 147, 163, 172,

183, 205, 210, 222, 223,

225, 226, 234, 256, 260,

264, 276, 281, 292, 313,

314, 345, 347, 377, 408,

410, 424, 435, 451, 461,

464, 499, 526, 536, 537,

540, 541, 581, 585, 801,

929, 960, 980, 983, 990,

ERJ2GE0R00X

RESISTOR, 1/16W, 0Ω

996, 999

99, 103, 135, 137, 157,

161, 240, 242, 243, 247,

251, 257, 259, 263, 266,

271, 273, 277, 324, 326,

328, 329, 332, 333, 339,

R 354, 369, 375, 384, 409,

413, 421, 436, 437, 438,

440, 454, 486, 556, 558,

559, 576, 809, 826, 827,

831, 847, 863, 920, 947,

ERJ2GEJ103X

RESISTOR, 1/16W, 10KΩ

972

104, 138, 139, 170, 214,

221, 224, 230, 231, 232,

278, 280, 338, 340, 341,

R 353, 355, 358, 359, 360,

366, 367, 431, 432, 433,

449, 575, 836, 859, 917,

918, 950, 998

ERJ2GEJ104X

RESISTOR, 1/16W, 100KΩ

R 105, 149, 284

DEARA8AJ104M

ERJ2GEJ101X

RESISTOR ARRAY

106, 114, 115, 198, 215,

269, 274, 349, 368, 374,

R 382, 430, 439, 530, 553,

557, 894, 895, 896, 897,

898, 899, 900, 957, 961

R 109, 141

R 110

R 111, 167, 228, 491

R 130

R 131

R 133, 218, 343

R 154

R 158, 177

R 160

RESISTOR, 1/16W, 100Ω

D1H84724A024

D1H81504A024

ERJ2GEJ203X

D1H82204A024

ERJ2RKF22R6X

ERJ2GEJ471X

ERJ2GEJ121X

ERJ2RKF3241X

ERJ2GEJ106X

RESISTOR ARRAY

RESISTOR, 1/16W, 20KΩ

RESISTOR, 1/16W, 22Ω

RESISTOR, 1/16W, 22.6Ω

RESISTOR, 1/16W, 470Ω

RESISTOR, 1/16W, 120Ω

RESISTOR, 1/16W, 3240Ω

RESISTOR, 1/16W, 10MΩ

164, 166, 199, 200, 201,

R 371, 372, 443, 444, 447,

448, 945, 976

ERJ2GEJ472X

RESISTOR, 1/16W, 4.7KΩ

168, 196, 888, 889, 890,

891, 893, 906

ERJ2GEJ105X

RESISTOR, 1/16W, 1MΩ

R 171, 331, 882, 926, 975

R 173, 220, 267, 286

R 174, 483

R 176, 458

R 178

ERJ2GEJ474X

D1H83304A024

ERJ2RKF3323X

ERJ2RKF4530X

D1H81004A024

RESISTOR, 1/16W, 470KΩ

RESISTOR ARRAY

RESISTOR, 1/16W, 332KΩ

RESISTOR, 1/16W, 453Ω

RESISTOR ARRAY

179, 180, 181, 279, 287,

403

188, 189, 190, 191, 192,

193, 194, 195

DEARA8AJ103M

ERJ2RKF49R9X

RESISTOR ARRAY

RESISTOR, 1/16W, 49.9Ω

R 203

R 206, 209, 282, 955

R 208

ERJ2RKF4991X

ERJ2RHD103X

ERJ2RHD303X

RESISTOR, 1/16W, 4.99KΩ

RESISTOR, 1/16W, 10KΩ

RESISTOR, 1/16W, 30KΩ

212, 304, 325, 361, 570,

883, 903, 922, 928, 997

ERJ2GEJ473X

RESISTOR, 1/16W, 47KΩ

R 213

R 239, 363, 455

R 248

R 255, 272, 275

R 270, 299, 350

R 288, 311

R 289

R 294, 296, 885, 886

R 298, 334

D1H87504A024

D1H81044A024

ERJ2GEJ150X

ERJ2RKF3901X

ERJ2GEJ273X

D1H82214A024

ERJ6GEY0R00V

ERJ2RKF5601X

D1H84734A024

RESISTOR ARRAY

RESISTOR, 1/16W, 100KΩ

RESISTOR, 1/16W, 15Ω

RESISTOR, 1/16W, 3.9KΩ

RESISTOR, 1/16W, 27KΩ

RESISTOR, 1/16W, 220Ω

RESISTOR, 1/10W, 0Ω

RESISTOR, 1/16W, 5.6KΩ

RESISTOR ARRAY

Download from Www.Somanuals.com. All Manuals Search And Download.

R 300, 302, 572

R 301, 303

R 306, 307

R 309, 467

R 336

ERJ2RKF1502X

ERJ2RKF2202X

ERJ2RKF30R1X

ERJ2RKF2671X

D1H81014A024

ERJ2GEJ181X

RESISTOR, 1/16W, 15KΩ

RESISTOR, 1/16W, 22KΩ

RESISTOR, 1/16W, 30.1Ω

RESISTOR, 1/16W, 2.67KΩ

RESISTOR ARRAY

R 344, 346, 352, 466

RESISTOR, 1/16W, 180Ω

370, 373, 379, 380, 524,

525

ERJ2GEJ222X

RESISTOR, 1/16W, 2.2KΩ

R 376, 856, 878

R 386, 400

R 417

R 460

R 470

R 496, 970, 973

R 529, 909, 989

R 531, 532, 533, 534

R 535

ERJ2RKF2002X

ERJ2GEJ4R7X

ERJ2GEJ334X

ERJ2RKF3920X

ERJ2RKF3922X

ERJ2RHD3001X

ERJ2RKF1501X

D1ZZ00000046

ERJ2RKF6811X

ERJ2RKF4022X

RESISTOR, 1/16W, 20KΩ

RESISTOR, 1/16W, 4.7Ω

RESISTOR, 1/16W, 330KΩ

RESISTOR, 1/16W, 392Ω

RESISTOR, 1/16W, 39.2KΩ

RESISTOR, 1/16W, 3KΩ

RESISTOR, 1/16W, 1.5KΩ

RESISTOR, 1W, 5mΩ

RESISTOR, 1/16W, 6.81KΩ

RESISTOR, 1/16W, 40.2KΩ

R 538, 550

542, 543, 564, 819, 842,

862, 887

ERJ3GEYJ100V

RESISTOR, 1/16W, 10Ω

R 546

R 549, 905, 907

R 551

R 552

R 554

R 555

R 560

R 561, 567

ERJ2GEJ303X

ERJ3GEYJ2R2V

ERJ3GEYJ104V

ERJ2RKF6801X

D1H8R0040009

ERJ2RKF1433X

ERJ2RKF1503X

ERJ2RKF6981X

ERJ2RKF1691X

ERJ2RKF7501X

D1BDR033A099

RESISTOR, 1/16W, 30KΩ

RESISTOR, 1/16W, 2.2Ω

RESISTOR, 1/16W, 100KΩ

RESISTOR, 1/16W, 6.80KΩ

JUMPER

RESISTOR, 1/16W, 143KΩ

RESISTOR, 1/16W, 150KΩ

RESISTOR, 1/16W, 6.98KΩ

RESISTOR, 1/16W, 1.69KΩ

RESISTOR, 1/16W, 7.5KΩ

RESISTOR, 1/3W, 0.033Ω

R 562

R 571

R 574, 839, 851, 867, 977

577, 578, 579, 580, 845,

864, 904

ERJ2GEJ223X

RESISTOR, 1/16W, 22KΩ

R 803, 811

R 828, 848, 866

D1JB1M00A001

ERJ2GEJ153X

RESISTOR, 1W, 1mΩ

RESISTOR, 1/16W, 15KΩ

832, 833, 852, 857, 858,

860, 869, 873, 875, 879

D1BDR022A099

RESISTOR, 1/3W, 0.022Ω

R 834

R 846, 874

R 853

R 854

R 855

R 861

R 868

R 871

R 880

ERJ2RKF3161X

ERJ2GEJ333X

ERJ2RKF1802X

ERJ2RKF1602X

ERJ2RKF2402X

ERJ2GEJ221X

ERJ2RKF6201X

ERJ2RKF3002X

ERJ2RKF1003X

ERJ2RKF1302X

ERJ6GEYJ222V

ERJ3GEYJ101V

ERJ2RKF10R0X

ERJ2RKF3011X

ERJ2RKF1052X

D1ZZ00000093

D1BDR4700001

ERJ2GEJ3R3X

ERJ2GEJ564X

ERJ2RHD153X

D1ZZ00000065

ERJ2RHD104X

ERJ2RKD154X

RESISTOR, 1/16W, 3.16KΩ

RESISTOR, 1/16W, 33KΩ

RESISTOR, 1/16W, 18KΩ

RESISTOR, 1/16W, 16KΩ

RESISTOR, 1/16W, 24KΩ

RESISTOR, 1/16W, 220Ω

RESISTOR, 1/16W, 6.2KΩ

RESISTOR, 1/16W, 30KΩ

RESISTOR, 1/16W, 100KΩ

RESISTOR, 1/16W, 13KΩ

RESISTOR, 1/10W, 2.2KΩ

RESISTOR, 1/16W, 100Ω

RESISTOR, 1/16W, 10Ω

RESISTOR, 1/16W, 3.01KΩ

RESISTOR, 1/16W, 10.5KΩ

RESISTOR, 1W, 1mΩ

R 884

R 901, 902

R 908, 915

R 910, 988

R 911

R 913

R 914

R 919

R 921

R 923, 946

R 952

R 953

RESISTOR, 1/8W, 0.47Ω

RESISTOR, 1/16W, 3.3Ω

RESISTOR, 1/16W, 560KΩ

RESISTOR, 1/16W, 15KΩ

RESISTOR, 1W, 4mΩ

R 954, 956

R 958, 959

RESISTOR, 1/16W, 100KΩ

RESISTOR, 1/16W, 150KΩ

962, 963, 964, 978, 981,

985

D1BDR1000002

RESISTOR, 1/8W, 0.1Ω

R 965

R 966

R 969

R 971

R 982

ERJ2GEJ154X

ERJ2RKF3652X

ERA3EEB1692V

ERJ2RKF1103X

ERJ2RKF1101X

RESISTOR, 1/16W, 150KΩ

RESISTOR, 1/16W, 36.5KΩ

RESISTOR, 1/16W, 16.9KΩ

RESISTOR, 1/16W, 110KΩ

RESISOTR, 1/16W, 1.1KΩ

Download from Www.Somanuals.com. All Manuals Search And Download.

R 984

R 991

R 992

R 993

R 994

R 995

T 1, 2

X 1

ERA3EKB1623V

ERJ2RKF1821X

ERJ2RKF2000X

ERJ2RKF2550X

ERJ2RKF2151X

ERJ2RKF3093X

G5BYC0000015

H0J143500058

H0J327200115

H0J250500076

H2C800400005

DRHM0121ZA

K1YGZZ000060

RESISTOR, 1/16W, 162KΩ

RESISTOR, 1/16W, 1.82KΩ

RESISTOR, 1/16W, 200Ω

RESISTOR, 1/16W, 255Ω

RESISTOR, 1/16W, 2.15KΩ

RESISTOR, 1/16W, 309KΩ

TRANCE

OSCILLATOR, 14.318MHz

OSCILLATOR, 32.768KHz

XTAL

X 2

X 3

X 4

CERAMIC RESONATOR

SCREW

SPACER

ZA 1, 2

ZA 3, 4

IO PCB

C 1204, 1205, 1206, 1216

F1G1C104A042

F1G1H5R0A452

F1L1H220A066

K1KA30AA0184

K1FY115A0001

K1FY109AA004

ERJ3GEYJ100V

ERJ3GEYJ270V

ERJ3GEY0R00V

D1H83304A024

CAPACITOR, 16V, 0.1µF

CAPACITOR, 50V, 5pF

CAPACITOR, 50V, 22pF

CONNECTOR

RESISTOR, 1/16W, 10Ω

RESISTOR, 1/16W, 27Ω

RESISTOR, 1/16W, 0Ω

RESISTOR ARRAY

C 1207, 1210, 1214

C 1213, 1215

CN 1201

CN 1202

CN 1203

FL 1201, 1202, 1203

R 1204, 1205, 1206, 1207

R 1206, 1207, 1208

R 1204, 1205

LED PCB

CN 1001

CN 1002, 1003

K1KY50AA0102

K1KA02BA0014

CONNECTOR

1001, 1002, 1003, 1006,

1007

B3ABB0000210

DIODE

D 1004

SW 1001

B3AGB0000040

EVQPLDA15

DIODE

SWITCH

USB PCB

C 1701

CN 1701

CN 1702

D 1701

EEFUD0J151ER

K1KA06BA0014

K1FY104BA024

B0KB00000044

J0MAB0000200

J0JHC0000074

CAPACITOR, 6.3V, 150µF

CONNECTOR

CONNECTOR, USB

DIODE

INDUCTOR

L 1701

L 1702, 1703

DC-IN PCB

C 1501

CN 1501

JK 1501

F1H1H104A748

K1KA06BA0128

K2EEYB000001

CAPACITOR, 50V, 0.1µF

CONNECTOR

JACK

TOUCH SCREEN PCB

1601, 1611, 1614, 1615,

1616

F1G1C104A042

CAPACITOR, 16V, 0.1µF

C 1602, 1621, 1622

C 1603, 1604, 1605, 1606

C 1607, 1608, 1609, 1610

C 1612

C 1613

C 1617

C 1619

CN 1600

CN 1601

CN 1602

CN 1603

FL 1600, 1601

FL 1602

IC 1600

IC 1601

IC 1602

IC 1603

IC 1604

L 1600

F1H1A1050015

F1G1E472A062

F1G1H681A496

F1G1E223A062

F1G1H102A496

F1G0J224A001

F1L1H220A066

K1KA15B00072

K1MN04B00073

K1KA08BA0014

K1KA14BA0109

F1J0J4750019

F1H0J1050022

C0JBAR000500

C0EBE0000460

C0JBAZ002422

C1CB00002515

C0CBCBC00181

J0MAB0000200

B1MBADA00003

B1GDCFNN0031

CAPACITOR, 10V, 1µF

CAPACITOR, 25V, 4700pF

CAPACITOR, 50V, 680pF

CAPACITOR, 25V, 0.022µF

CAPACITOR, 50V, 1000pF

CAPACITOR, 6.3V, 0.22µF

CAPACITOR, 50V, 22pF

CONNECTOR

CAPACITOR, 6.3V, 4.7µF

CAPACITOR, 6.3V, 1µF

IC, SWITCH

IC, FET SWITCH

IC, TOUCHPANEL CONTROLLER

INDUCTOR

TRANSISTOR

Q 1600, 1601

Q 1602

TRANSISTOR

Download from Www.Somanuals.com. All Manuals Search And Download.

Q 1603

R 1601

B1GBCFJN0037

ERJ2GEJ273X

TRANSISTOR

RESISTOR, 1/16W, 27KΩ

1602, 1603, 1604, 1605,

R 1614, 1616, 1619, 1621,

1622, 1623, 1624

R 1606, 1607, 1608, 1609

R 1610

R 1611, 1617

R 1620, 1629

R 1625

R 1626, 1627

R 1628

X 1600

ERJ2GEJ102X

RESISTOR, 1/16W, 1KΩ

ERJ2GEJ822X

ERJ2GEJ103X

ERJ2GEJ473X

ERJ2GE0R00X

DEARA8AJ473M

ERJ2GEJ270X

ERJ2GEJ152X

H2D600400005

RESISTOR, 1/16W, 8.2KΩ

RESISTOR, 1/16W, 10KΩ

RESISTOR, 1/16W, 47KΩ

RESISTOR, 1/16W, 0Ω

RESISTOR ARRAY

RESISTOR, 1/16W, 27Ω

RESISTOR, 1/16W, 1.5KΩ

OSCILLATOR, 6MHz

SD PCB

C 1401

C 1402

CN 1401

CN 1402

D 1401

Q 1401

Q 1402

R 1401

R 1402

PAD/SWITCH PCB

C 1301

C 1302

CN 1301

CN 1302

R 1301

SW 1301

SW 1302

SW 1303, 1304

BLUETOOTH PCB

C 1

C 2, 7

C 3, 5

C 6

C 8

CN 1

IC 1

IC 2

IC 3

JK 1

L 1

L 2

L 4

L 5

Q 1

Q 2

R 1

F1H1A1050015

F1G1C104A042

K1MN20BA0134

K1NA09E00073

B3ACB0000020

B1GDCFJA0025

B1GBCFJN0037

ERJ3GEYJ101V

ERJ2GEJ103X

CAPACITOR, 10V, 1µF

CAPACITOR, 16V, 0.1µF

CONNECTOR

DIODE

TRANSISTOR

RESISTOR, 1/16W, 100Ω

RESISTOR, 1/16W, 10KΩ

F1G1E103A062

F1H0J1050022

K1MN12BA0070

K1MY12BA0105

ERJ2GEJ101X

K0D112B00071

K0ZZ00000618

EVQPLDA15

CAPACITOR, 25V, 0.01µF

CAPACITOR, 6.3V, 1µF

CONNECTOR

RESISTOR, 1/16W, 100Ω

SWITCH

F1J0J1060004

F1G1C104A042

F1G1H102A496

F1G1E103A062

F1G1H270A542

K1MY10BA0105

C0JBAZ002422

N5HZZ0000040

C0EBE0000460

K1QZA1AE0001

J0JHC0000074

J0JJC0000021

G1C3N3ZA0029

J0MAB0000200

B1GBCFJN0037

B1DHDC000028

ERJ2GEJ474X

ERJ2GEJ473X

CAPACITOR, 6.3V, 10µF

CAPACITOR, 16V, 0.1µF

CAPACITOR, 50V, 1000pF

CAPACITOR, 25V, 0.01µF

CAPACITOR, 50V, 27pF

CONNECTOR

IC, FET SWITCH

BLUETOOTH MODULE

CONNECTOR

INDUCTOR

TRANSISTOR

RESISTOR, 1/16W, 470KΩ

RESISTOR, 1/16W, 47KΩ

R 2

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Vacuum Cleaner S185 User Manual
Navman GPS Receiver SmartST Professional User Manual
NEC Telephone IM 16 User Manual
Nostalgia Electrics Blender MSB 64 User Manual
Olympus Camcorder 227615 User Manual
Omega Vehicle Security Camcorder HHB400 User Manual
Optimus Speaker PRO SW 120 User Manual
Oregon Scientific Digital Camera ATC3K User Manual
Oster Blender 2609 User Manual
Panasonic Cell Phone EB G520 User Manual