Basic
Operating Instructions
Digital Camera
Model No.
DMC-FS12
Before connecting, operating or adjusting this product,
please read the instructions completely.
Please also refer to Operating
Instructions (PDF format)
recorded on the CD-ROM
containing the Operating Instructions
(supplied).
You can learn about advanced operation methods
and check the Troubleshooting.
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,
VQT2D42
P
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance, follow the attached installation
instructions and use only shielded interface cables with ferrite core when
connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name:
Model No.:
Panasonic
DMC-FS12
Responsible party: Panasonic Corporation of North America One Panasonic Way,
Secaucus, NJ 07094
Support Contact: Panasonic Consumer Electronics Company 1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
DMC-FS12
(ENG) VQT2D42
3
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ About the battery pack
CAUTION
Battery pack (Lithium ion battery pack)
• Use the specified unit to recharge the battery pack.
• Do not use the battery pack with equipment other than the specified unit.
• Do not get dirt, sand, liquids, or other foreign matter on the terminals.
• Do not touch the plug terminals (i and j) with metal objects.
• Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or clothes, wash it off
thoroughly with water.
If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse
eyes thoroughly with water, and then consult a doctor.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of
time with doors and windows closed.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60
x
C (140 oF) or incinerate.
∫ About the battery charger
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR
IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO
PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT
THE VENTILATION VENTS.
Battery charger
This battery charger operates on AC between 110 V and 240 V.
But
• In the U.S.A. and Canada, the battery charger must be connected to a 120 V AC power
supply only.
• When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to
suit the AC outlet configuration.
VQT2D42 (ENG)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Cautions for Use
• Always use a genuine Panasonic AC adaptor (DMW-AC5PP; optional).
• Do not use any other cables except a genuine Panasonic AV cable (DMW-AVC1; optional).
• Do not use any other USB connection cables except the supplied one.
Keep the camera as far away as possible from electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
• If you use the camera on top of or near a TV, the pictures and sound on the camera may be
disrupted by electromagnetic wave radiation.
• Do not use the camera near cell phones because doing so may result in noise adversely
affecting the pictures and sound.
• Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields
created by speakers or large motors.
• Electromagnetic wave radiation generated by microprocessors may adversely affect the
camera, disturbing the pictures and sound.
• If the camera is adversely affected by electromagnetic equipment and stops functioning
properly, turn the camera off and remove the battery or disconnect AC adaptor (DMW-AC5PP;
optional). Then reinsert the battery or reconnect AC adaptor and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.
• If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may
be adversely affected.
∫ Care of the camera
• Do not strongly shake or bump the camera by dropping or hitting it. Do not subject to
strong pressure.
The camera may malfunction, recording pictures may become impossible, or the lens, the LCD
monitor or the external case may be damaged.
• We strongly recommend you do not leave the camera in your trousers pocket
when you sit down or forcefully insert it into a full or tight bag etc.
Damage to the LCD monitor or personal injury may result.
• Do not attach any other items to the hand strap that’s included with your
camera. While being stored, that item can rest against the LCD monitor and
damage it.
• Be particularly careful in the following places as they may cause this
unit to malfunction.
– Places with a lot of sand or dust.
– Places where water can come into contact with this unit such as when using
it on a rainy day or on a beach.
• Do not touch the lens or the sockets with dirty hands. Also, be careful not to allow
liquids, sand and other foreign matter to get into the space around the lens, buttons etc.
• This camera is not waterproof. If water or seawater splashes on the camera, use a dry
cloth to wipe the camera body carefully.
If the unit does not operate normally, please contact the dealer where you purchased the
camera or the repair service center.
∫ About Condensation (When the lens is fogged up)
• Condensation occurs when the ambient temperature or humidity changes. Be careful of
condensation since it causes lens stains, fungus and camera malfunction.
• If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will
disappear naturally when the temperature of the camera becomes close to the ambient
temperature.
(ENG) VQT2D42
5
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ About cards that can be used in this unit
You can use an SD Memory Card and SDHC Memory Card.
• When the term card is used in these operating instructions this refers to the following types of
Memory Cards.
– SD Memory Card (8 MB to 2 GB)
– SDHC Memory Card (4 GB to 32 GB)
More specific information about memory cards that can be used with this unit.
• You can only use an SDHC Memory Card if using cards with 4 GB or
OK
more capacity.
• A 4 GB (or more) Memory Card without an SDHC logo is not based on
the SD Standard and will not work in this product.
Please confirm the latest information on the following website.
(This Site is English only.)
4
4
• Keep the Memory Card out of reach of children to prevent swallowing.
-If you see this symbol-
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of disposal.
VQT2D42 (ENG)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Information for Your Safety.................................................................................................2
Standard Accessories.........................................................................................................8
Names of the Components.................................................................................................9
Charging the Battery.........................................................................................................11
Inserting and Removing the Card (optional)/the Battery...................................................13
Setting Date/Time (Clock Set) ..........................................................................................14
• Changing the clock setting..........................................................................................14
Setting the Menu...............................................................................................................15
• Setting menu items.....................................................................................................15
Selecting the [REC] Mode ................................................................................................17
Taking pictures using the automatic function (ñ: Intelligent Auto Mode).........................18
• Scene detection..........................................................................................................19
Taking pictures with your favorite settings (·: Normal picture mode) .............................20
• Focusing .....................................................................................................................20
Playing back Pictures ([NORMAL PLAY]) ........................................................................21
Deleting Pictures...............................................................................................................22
• To delete a single picture............................................................................................22
• To delete multiple pictures (up to 50) or all the pictures.............................................22
Reading the Operating Instructions (PDF format) ............................................................23
Specifications....................................................................................................................24
Digital Camera Accessory System ...................................................................................28
Digital Camera Accessory Order Form.............................................................................29
Request for Service Notice...............................................................................................30
Limited Warranty...............................................................................................................31
Customer Services Directory............................................................................................33
(ENG) VQT2D42
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Standard Accessories
Check that all the accessories are included before using the camera.
1
Battery Pack
1
2
(Indicated as battery in the text)
Charge the battery before use.
Battery Charger
2
(Indicated as charger in the text)
USB Connection Cable
CD-ROM
3
4
DMW-BCF10PP
DE-A59B
• Software:
3
Use it to install the software to your PC.
• Operating Instructions
Hand Strap
5
6
Battery Case
K1HA08AD0001
• SD Memory Card and SDHC Memory Card
are indicated as card in the text.
• The card is optional.
You can record or play back pictures on the
built-in memory when you are not using a
card.
• For information about optional accessories,
refer to the “Digital Camera Accessory
System”.
• If any accessories are lost, customers should
contact Panasonic’s parts department at
1 800 833-9626 for further information about
obtaining replacement parts.
4
6
5
VFF0512
VFC4297
VGQ0D56
VQT2D42 (ENG)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of the Components
1
2
3
Flash
Lens
Self-timer indicator
AF assist lamp
1
2
3
4
5
6
7
8
9
LCD monitor
Status indicator
[MENU/SET] button
[DISPLAY] button
[Q.MENU]/Delete button
[MODE] button
4
9 10 11
10 [REC]/[PLAYBACK] selector switch
5 6 7 8
11 Cursor buttons
A: 3/Exposure compensation/
Auto bracket
B: 4/Macro mode
C: 2/Self-timer button
D: 1/Flash setting button
In these operating instructions, the cursor buttons are described as shown in the
figure below or described with 3/4/2/1.
e.g.: When you press the 4 (down) button
or
Press 4
(ENG) VQT2D42
9
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Camera ON/OFF switch
13 Zoom lever
12 13
14 Speaker
15 Microphone
16 Shutter button
17 Intelligent auto button
14 15
16 17
18 Hand strap eyelet
18
19
• Be sure to attach the hand strap when
using the camera to ensure that you will
not drop it.
19 Lens barrel
20 [AV OUT/DIGITAL] socket
20
21 Tripod receptacle
21
22
• When you use a tripod, make sure the
tripod is stable when the camera is
attached to it.
22 Card/Battery door
23 Release lever
24 23
24 DC coupler cover
• When using an AC adaptor, ensure that
the Panasonic DC coupler (DMW-DCC4;
optional) and AC adaptor (DMW-AC5PP;
optional) are used.
• We recommend you use a battery with
sufficient battery power or the AC adaptor
when recording motion pictures.
• If while recording motion pictures using the
AC adaptor the power supply is cut off due
to a power cut or if the AC adaptor is
disconnected etc., the motion picture being
recorded will not be recorded.
VQT2D42 (ENG)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery
∫ About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCF10PP.
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not
liable for any accident or failure occurring as a result of use of a counterfeit
battery pack. To ensure that safe products are used we would recommend that a
genuine Panasonic battery pack is used.
• Use the dedicated charger and battery.
• This unit has a function that can distinguish useable batteries. Exclusive batteries
(DMW-BCF10PP) are supported by this function. (Conventional batteries not supported
by this function cannot be used.)
• The battery is not charged when the camera is shipped. Charge the battery before use.
• Charge the battery with the charger indoors.
• Charge the battery in a temperature between 10 oC to 35 oC (50 oF to 95 oF). (The battery
temperature should also be the same.)
Attach the battery paying
attention to the direction of the
battery.
Connect the charger to the
electrical outlet.
• Charging starts when the [CHARGE]
indicator A lights green.
• Charging is complete when the
[CHARGE] indicator A turns off (after
approx. 130 min).
90
Detach the battery after
charging is completed.
(ENG) VQT2D42
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
• After charging is completed, be sure to disconnect the power supply device from the electrical
outlet.
• The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
• The battery will be exhausted if left for a long period of time after being charged.
•
The battery can be recharged even when it still has some charge left, but it is not recommended
that the battery charge be frequently topped up while the battery is fully charged. (The battery
has characteristics that will reduce its operating duration and cause the battery to swell up.)
• When the operating time of the camera becomes extremely short even after properly charging
the battery, the life of the battery may have expired. Buy a new battery.
• Do not leave any metal items (such as clips) near the contact areas of the power plug.
Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the
resulting heat generated.
∫ The battery life
Number of recordable
Approx. 330 pictures
By CIPA standard in
Normal picture mode
pictures
Approx. 165 min
Recording time
Recording conditions by CIPA standard
• CIPA is an abbreviation of [Camera & Imaging Products Association].
• Temperature: 23 oC (73.4 oF)/Humidity: 50% when LCD monitor is on.
• Using a Panasonic SD Memory Card (32 MB).
¢
• Using the supplied battery.
• Starting recording 30 seconds after the camera is turned on. (When the Optical image stabilizer
function is set to [AUTO].)
• Recording once every 30 seconds with full flash every second recording.
• Rotating the zoom lever from Tele to Wide or vice versa in every recording.
• Turning the camera off every 10 recordings and leaving it until the temperature of the battery
decreases.
¢
The number of recordable pictures decreases in Auto Power LCD mode, Power LCD mode
and High angle mode.
The number of recordable pictures varies depending on the recording interval time.
If the recording interval time becomes longer, the number of recordable pictures
decreases. (e.g. When recording once every 2 minutes, the number of recordable
pictures decreases to about 82.)
Approx. 360 min
Playback time
The number of recordable pictures and playback time will vary depending on the
operating conditions and storing condition of the battery.
∫ Charging
Charging time
Approx. 130 min
The charging time will vary slightly depending on the status of the battery and the
conditions in the charging environment.
VQT2D42 (ENG)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting and Removing the Card (optional)/the
Battery
• Check that this unit is turned off.
• We recommend using a Panasonic card.
Slide the release lever in the direction
of the arrow and open the card/battery
door.
• Always use genuine Panasonic batteries
(DMW-BCF10PP).
• If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Insert until it is locked by the
lever A being careful about the
direction you insert it. Pull the lever A
in the direction of the arrow to remove
the battery.
Card: Push it fully until it clicks being
careful about the direction you insert it.
To remove the card, push the card until
it clicks, then pull the card out upright.
B:Do not touch the connection terminals of the
card.
• The card may be damaged if it is not fully inserted.
1: Close the card/battery door.
2: Slide the release lever in the
direction of the arrow.
• If the card/battery door cannot be completely
closed, remove the card, check its direction and
then insert it again.
(ENG) VQT2D42
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
Turn the camera on.
OFF
ON
• The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A [MENU/SET] button
B Cursor buttons
Press [MENU/SET].
MENU
/SET
Press 2/1 to select the items (year,
month, day, hour, minute, display
sequence or time display format), and
press 3/4 to set.
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
• After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording mode, and check that the display reflects the settings that were
performed.
• When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the “Changing the clock setting” procedure
below.
Changing the clock setting
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1.
• It can be changed in steps 3 and 4 to set the clock.
• The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
VQT2D42 (ENG)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Menu
The camera comes with menus that allow you to set the settings for taking pictures and
playing them back just as you like and menus that enable you to have more fun with the
camera and use it more easily.
In particular, the [SETUP] menu contains some important settings relating to the camera’s
clock and power. Check the settings of this menu before proceeding to use the camera.
Setting menu items
This section describes how to select the Normal picture mode settings, and the same
setting can be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [Ø] to [š] in the Normal picture mode
Turn the camera on.
OFF
ON
A [MENU/SET] button
B [REC]/[PLAYBACK] selector switch
C [MODE] button
Slide the [REC]/[PLAYBACK] selector
switch to [!], and then press [MODE].
• When selecting the [PLAYBACK] mode menu settings,
set the [REC]/[PLAYBACK] selector switch to [(], and
proceed to step 4.
Press 3/4 to select [NORMAL PICTURE],
and then press [MENU/SET].
Press [MENU/SET] to display the menu.
• You can switch menu screens from any menu item by
rotating the zoom lever.
MENU
/SET
(ENG) VQT2D42
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching to the [SETUP] menu
Press 2.
Press 4 to select the [SETUP] menu
icon
.
Press 1.
• Select a menu item next and set it.
Press 3/4 to select [AF MODE].
• Select the item at the very bottom, and press 4 to
move to the second screen.
Press 1.
• Depending on the item, its setting may not appear or it
may be displayed in a different way.
Press 3/4 to select [š].
Press [MENU/SET] to set.
MENU
/SET
Press [MENU/SET] to close the menu.
VQT2D42 (ENG)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the [REC] Mode
When the [REC] mode is selected, the camera can be set to the Intelligent auto mode in
which the optimal settings are established in line with the subject to be recorded and the
recording conditions, or to the Scene mode which enables you to take pictures that match
the scene being recorded.
Turn the camera on.
OFF
ON
A [MENU/SET] button
B [REC]/[PLAYBACK] selector switch
C [MODE] button
Slide the [REC]/[PLAYBACK] selector
switch to [!].
Press [MODE].
Press 3/4 to select the mode.
Press [MENU/SET].
∫ List of [REC] modes
¦
Intelligent auto mode
The subjects are recorded using settings automatically selected by the camera.
Normal picture mode
!
The subjects are recorded using your own settings.
My scene mode
Pictures are taken using previously registered recording scenes.
Û
Scene mode
This allows you to take pictures that match the scene being recorded.
Motion picture mode
This mode allows you to record motion pictures with audio.
$
(ENG) VQT2D42
17
Download from Www.Somanuals.com. All Manuals Search And Download.
[REC] mode: ñ
Taking pictures using the automatic function
(ñ: Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the recording
conditions so we recommend this mode for beginners or those who want to leave the
settings to the camera and take pictures easily.
• The following functions are activated automatically.
– Scene detection/[STABILIZER]/[INTELLIGENT ISO]/Face detection/Backlight
Compensation/Digital Red-eye Correction
• The status indicator 3 lights when you
turn this unit on 2. (It turns off after about
1 second.)
(1: Shutter button)
Slide the [REC]/[PLAYBACK] selector switch to [!], and then press
[MODE].
Press
3
/
4
to select [INTELLIGENT AUTO], and then press [MENU/SET].
• You can quickly switch to Intelligent auto mode by pressing [¦] A when the [REC]/
[PLAYBACK] selector switch is set to record. Pressing [¦] again takes you back to the
previous mode.
Hold the camera gently with both hands,
keep your arms still at your side and stand
with your feet slightly apart.
B Flash
C AF assist lamp
1
Press the shutter button halfway to focus.
• The focus indication 1(green) lights when the subject
is focused.
• The AF area 2is displayed around the subject’s face
by the face detection function. In other cases, it is
displayed at the point on the subject which is in focus.
• The focus range is 5 cm (0.17 feet) (Wide)/50 cm
(1.64 feet) (Tele) to ¶.
2
VQT2D42 (ENG)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the shutter button fully (push it in
further), and take the picture.
• The access indication lights red when pictures are
being recorded on the built-in memory (or the card).
•
Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor
(DMW-AC5PP; optional) when the access indication is lit [when pictures are being
written, read or deleted, or the built-in memory or the card is being formatted].
Furthermore, do not subject the camera to vibration, impact or static electricity.
The card or the data on the card may be damaged, and this unit may no longer
operate normally.
If operation fails due to vibration, impact or static electricity, perform the
operation again.
Scene detection
When the camera identifies the optimum scene, the icon of the scene concerned is
displayed in blue for 2 seconds, after which its color changes to the usual red.
¦
>
[i-PORTRAIT]
[i-SCENERY]
[i-MACRO]
• Only when [‡] is selected
[i-NIGHT PORTRAIT]
[i-NIGHT SCENERY]
• Only when [Œ] is selected
• [¦] is set if none of the scenes are applicable, and the standard settings are set.
• If a tripod is used, for instance, and the camera has judged that camera shake is minimal when
the Scene mode has been identified as [ ], the shutter speed will be set to a maximum of
8 seconds. Take care not to move the camera while taking pictures.
∫ Face detection
When [ ] or [ ] is selected, the camera automatically detects a person’s face, and it will
adjust the focus and exposure.
Note
• Due to conditions such as the ones below, a different scene may be
identified for the same subject.
– Subject conditions: When the face is bright or dark, The size of the
subject, The distance to the subject, The contrast of the subject,
When the subject is moving, When zoom is used
– Recording conditions: Sunset, Sunrise, Under low brightness
conditions, When the camera is shaken
• To take pictures in an intended scene, it is recommended that you take pictures in the
appropriate Recording mode.
∫ The Backlight Compensation
Backlight refers to when light comes from the back of a subject.
In this case, the subject will become dark, so this function compensates the backlight by
brightening the whole of the picture automatically.
(ENG) VQT2D42
19
Download from Www.Somanuals.com. All Manuals Search And Download.
[REC] mode: ·
Taking pictures with your favorite settings
(·: Normal picture mode)
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in [REC] menu.
Slide the [REC]/[PLAYBACK] selector
switch to [!], and then press [MODE].
A [MODE] button
B [REC]/[PLAYBACK] selector switch
Press 3/4 to select [NORMAL
PICTURE], and then press [MENU/SET].
C [MENU/SET] button
Aim the AF area at the point you want to
focus on.
Press the shutter button halfway to
focus.
• The focus indication (green) lights when the
subject is focused.
• The focus range is 50 cm (1.64 feet) to ¶.
Press the halfway pressed shutter
button fully to take a picture.
• The access indication lights red when pictures are
being recorded on the built-in memory (or the
card).
Focusing
Aim the AF area at the subject, and then press the shutter button halfway.
A
When the subject is When the subject
Focus
focused
is not focused
Blinks
Focus indication On
B
C
AF area
Sound
White>Green
White>Red
Beeps 4 times
Beeps 2 times
A Focus indication
B AF area (normal)
C AF area (when using the digital zoom or when it is dark)
VQT2D42 (ENG)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
[PLAYBACK] mode: ¸
Playing back Pictures ([NORMAL PLAY])
Slide the [REC]/[PLAYBACK] selector
switch A to [(].
• Normal playback is set automatically in the
following cases.
– When the mode was switched from the [REC] to
[PLAYBACK]
– When the camera was turned on while the [REC]/
[PLAYBACK] selector switch was at [(].
Press 2/1 to select the picture.
2: Play back the previous picture
1: Play back the next picture
∫ Fast forwarding/Fast rewinding
Press and hold 2/1 during playback.
A
B
2: Fast rewind
1: Fast forward
• The file number A and the picture number B only
change one by one. Release 2/1 when the number of
the desired picture appears to play back the picture.
• If you keep pressing 2/1, the number of pictures
forwarded/rewound increases.
(ENG) VQT2D42
21
Download from Www.Somanuals.com. All Manuals Search And Download.
[PLAYBACK] mode: ¸
Deleting Pictures
Once deleted, pictures cannot be recovered.
• Pictures on the built-in memory or the card, which is being played back will be deleted.
To delete a single picture
Select the picture to be deleted, and then
press [‚].
A [DISPLAY] button
B [‚] button
Press 2 to select [YES] and then press
[MENU/SET].
MENU
/SET
To delete multiple pictures (up to 50) or all the pictures
Press [‚].
Press 3/4 to select [DELETE MULTI] or [DELETE ALL] and then
press [MENU/SET].
• [DELETE ALL] > step 5.
Press 3/4/2/1 to select the picture, and
then press [DISPLAY] to set. (Repeat this
step.)
• [ ] appears on the selected pictures. If [DISPLAY] is
pressed again, the setting is canceled.
DISPLAY
Press [MENU/SET].
Press 3 to select [YES] and then press [MENU/SET] to set.
VQT2D42 (ENG)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Reading the Operating Instructions (PDF format)
• You have practised the basic operations introduced in these operating instructions and want to
progress to advanced operations.
• You want to check the Troubleshooting.
In these kinds of situations refer to Operating Instructions (PDF format) recorded on the
CD-ROM containing the Operating Instructions (supplied).
∫ For Windows
Turn the PC on and insert the CD-ROM containing the Operating
Instructions (supplied).
Click the [Operating Instructions/
Manuel d’utilisation].
Select the desired language and then
click [Operating Instructions] to
install.
A To return to the install menu.
(Example: When an English language OS)
Double click the “Operating
Instructions” shortcut icon on the desktop.
∫ When the Operating Instructions (PDF format) will not open
You will need Adobe Acrobat Reader 4.0 or later or Adobe Reader 6.0 or later to browse or
print the Operating Instructions (PDF format).
Download and install a version of Adobe Reader that you can use with your OS from the
following Web Site.
If using Windows 2000 SP4/Windows XP SP2 or SP3/Windows Vista and SP1
Insert the CD-ROM containing the Operating Instructions (supplied), click [Adobe(R)
Reader(R)] and then follow the messages on the screen to install.
∫ To uninstall the Operating Instructions (PDF format)
Delete the PDF file from the “Program Files\Panasonic\Lumix\” folder.
• When the contents in the Program Files folder cannot be displayed, click the [Show the
contents of this folder] to display them.
∫ For Macintosh
Turn the PC on and insert the CD-ROM containing the Operating
Instructions (supplied).
Open the “Manual” folder in the CD-ROM and then copy the PDF file
with the desired language inside the folder.
Double click the PDF file to open it.
(ENG) VQT2D42
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Digital Camera:
Information for your safety
Power Source:
DC 5.1 V
Power Consumption:
1.35 W (When recording)
0.6 W (When playing back)
Camera effective pixels
Image sensor:
:
12,100,000 pixels
1/2.33 CCD, total pixel number 12,700,000 pixels, Primary
q
color filter
Lens:
Optical 4kzoom, fl5.5 mm to 22 mm (35 mm film camera
equivalent: 31 mm to 124 mm)/F2.8 to F5.9
Max. 4k
Digital zoom:
Extended optical zoom: Max. 7.8k
Focus:
Normal/AF macro/Macro zoom/Face detection/9-area-focusing/
1-area-focusing
Focus range:
Normal: 50 cm (1.64 feet) to ¶
Macro/Intelligent auto:
5 cm (0.17 feet) (Wide)/50 cm (1.64 feet) (Tele) to ¶
Scene mode: There may be differences in the above settings.
Electronic shutteriMechanical shutter
Shutter system:
Motion picture
recording:
848k480 pixels (30 frames/second, only when using a Card)/
640k480 pixels (30 frames/second, only when using a Card)/
320k240 pixels (30 frames/second)
Burst recording
Burst speed:
1.8 pictures/second (Normal),
Approx. 1.7 pictures/second (Unlimited)
Number of recordable
pictures:
Max. 5 pictures (Standard), Max. 3 pictures (Fine),
Depends on the remaining capacity of the built-in memory or
the card (Unlimited).
(Performance in Burst recording is only with SD Memory Card/
SDHC Memory Card.)
VQT2D42 (ENG)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Hi-speed burst
Burst speed:
Approx. 5 pictures/second
(3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the picture
size.)
Number of recordable
pictures:
When using the built-in memory:
Approx. 10 pictures
(immediately after formatting)
When using a Card: Max. 100 pictures (differs depending on
the type of Card and the recording conditions)
AUTO/80/100/200/400/800/1600
[HIGH SENS.] mode: 1600 to 6400
8 seconds to 1/2000th of a second
[STARRY SKY] mode: 15 seconds, 30 seconds, 60 seconds
Auto white balance/Daylight/Cloudy/Shade/Incandescent lights/
White set
ISO sensitivity:
Shutter speed:
White balance:
Exposure (AE):
Program AE
Exposure compensation (1/3 EV Step, j2 EV to i2 EV)
Multiple
2.7q TFT LCD
Metering mode:
LCD monitor:
(Approx. 230,000 dots) (field of view ratio about 100%)
Flash range: [ISO AUTO]
Flash:
Approx. 30 cm (0.99 feet) to 6.3 m (20.7 feet) (Wide)
AUTO, AUTO/Red-eye reduction, Forced flash ON (Forced ON/
Red-eye reduction), Forced flash OFF (, Slow sync./Red-eye
reduction)
Microphone:
Speaker:
Monaural
Monaural
Recording media:
Built-in Memory (Approx. 50 MB)/SD Memory Card/SDHC
Memory Card
Picture size
Still picture:
When the aspect ratio setting is [X]
4000k3000 pixels, 3264k2448 pixels, 2560k1920 pixels,
2048k1536 pixels, 1600k1200 pixels, 640k480 pixels
When the aspect ratio setting is [Y]
4000k2672 pixels, 3264k2176 pixels, 2560k1712 pixels,
2048k1360 pixels
When the aspect ratio setting is [W]
4000k2248 pixels, 3264k1840 pixels, 2560k1440 pixels,
1920k1080 pixels
Motion pictures:
848k480 pixels (Only when using a Card)/
640k480 pixels (Only when using a Card)/
320k240 pixels
(ENG) VQT2D42
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Quality:
Fine/Standard
Recording file format
Still Picture:
JPEG (based on “Design rule for Camera File system”, based
on “Exif 2.21” standard)/DPOF corresponding
Motion pictures:
Interface
“QuickTime Motion JPEG” (motion pictures with audio)
Digital:
“USB 2.0” (Full Speed)
Analog video/
audio:
NTSC,
Audio line output (monaural)
Terminal
[AV OUT/DIGITAL]:
Dimensions:
Dedicated jack (8 pin)
Approx. 97.0 mm (W)k54.4 mm (H)k21.7 mm (D)
[Approx. 3 13/16q (W)k2 1/8q(H)k7/8q (D)]
(excluding the projecting parts)
Mass (weight):
Approx. 117 g/4.13 oz (excluding card and battery)
Approx. 139 g/4.90 oz (with card and battery)
Operating temperature: 0 oC to 40 oC (32 oF to 104 oF)
Operating humidity:
Language select:
10% to 80%
[ENGLISH]/[ESPAÑOL]
VQT2D42 (ENG)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Charger
(Panasonic DE-A59B): Information for your safety
Input:
110 V to 240 V 50/60 Hz, 0.2 A
CHARGE 4.2 V 0.65 A
Output:
Equipment mobility:
Movable
Battery Pack
(lithium-ion)
(Panasonic
DMW-BCF10PP):
Information for your safety
3.6 V/940 mAh
Voltage/capacity
(Minimum):
(ENG) VQT2D42
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Camera Accessory System
Description
Battery Pack
Accessory#
Illustration
DMW-BCF10PP
DMW-AVC1
DMW-AC5PP
DMW-DCC4
DMW-CS5
AV Cable
AC Adaptor
DC Coupler
Soft Case
DMW-CHFX30
Semi Hard Case
RP-SDV32GU1K
RP-SDV16GU1K
RP-SDM12GU1K
RP-SDV08GU1K
RP-SDM06GU1K
RP-SDM04GU1K
RP-SDV04GU1K
RP-SDM02GU1A
RP-SDV02GU1A
RP-SDR01GU1A
32 GB SDHC Memory Card
16 GB SDHC Memory Card
12 GB SDHC Memory Card
8 GB SDHC Memory Card
6 GB SDHC Memory Card
4 GB SDHC Memory Card
4 GB SDHC Memory Card
2 GB SD Memory Card
2 GB SD Memory Card
1 GB SD Memory Card
¢
Ensure that the AC adaptor (DMW-AC5PP; optional) and DC coupler (DMW-DCC4; optional)
are purchased as a set. Do not use if sold separately.
• NOTE: Accessories and/or model numbers may vary between countries. Consult your local
dealer.
VQT2D42 (ENG)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Camera Accessory Order Form
Please photocopy this form when placing an order.
1. Digital Camera Model #
2. Items Ordered
Accessory #
Description
Price Each
Quantity
Total Price
Subtotal
Your State & Local Sales Tax
Shipping & Handling
Total Enclosed
6.95
3. Method of payment (check one)
Check of Money Order enclosed (NO C.O.D.SHIPMENTS)
VISA
Credit Card #
MasterCard
Discover
Expiration Date
Customer Signature
Make Check or Money Order to: PANASONIC ACCESSORIES
(Please do not send cash)
4. Shipping information (UPS delivery requires complete street address)
Ship To:
Mr.
Mrs.
Ms.
Phone#:
First
Last
(
)
Day
Street Address
City
(
)
Night
State
Zip
TO OBTAIN ANY OF OUR DIGITAL CAMERA ACCESSORIES YOU CAN DO ANY OF
THE FOLLOWING:
VISIT YOUR LOCAL PANASONIC DEALER
OR
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368
[6 AM-6 PM M-F, PACIFIC TIME]
OR
MAIL THIS ORDER TO: PANASONIC SERVICE AND TECHNOLOGY COMPANY
ACCESSORY ORDER OFFICE
20421 84th Avenue South Kent, WA. 98032
(ENG) VQT2D42
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Request for Service Notice
Please make a copy of this page and note the problem you are having. Include it with
your proof of purchase, and ship your camera to the address below.
Reason for requesting service:
(USA and Puerto Rico Only)
Mail this completed form and your Proof of Purchase along with your unit to:
Panasonic Services Company
Customer Servicenter
Suite B
4900 George McVay Drive
McAllen, TX 78503
VQT2D42 (ENG)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC
CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Digital Still Camera
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company (referred to as “the warrantor”) will, for the
length of the period indicated on the chart below, which starts with the date of original
purchase (“warranty period”), at its option either (a) repair your product with new or
refurbished parts, or (b) replace it with a new or refurbished product. The decision to repair
or replace will be made by the warrantor.
PRODUCT OR PART NAME
DIGITAL STILL CAMERA
PARTS
LABOR
1 (ONE) YEAR
1 (ONE) YEAR
(EXCEPT ITEMS LISTED
BELOW)
CCD
6 (SIX) MONTHS
90 (NINETY) DAYS
NOT APPLICABLE
RECHARGEABLE BATTERY
PACK
90 (NINETY) DAYS
(IN EXCHANGE FOR
DEFECTIVE BATTERY PACK)
SD MEMORY CARD
90 (NINETY) DAYS
NOT APPLICABLE
(IN EXCHANGE FOR
DEFECTIVE SD CARD)
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. You must carry-in or mail-in your product
during the warranty period. If non-rechargeable batteries are included, they are not
warranted. This warranty only applies to products purchased and serviced in the United
States or Puerto Rico. This warranty is extended only to the original purchaser of a new
product which was not sold “as is”. A purchase receipt or other proof of the original
purchase date is required for warranty service.
(ENG) VQT2D42
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States and Puerto Rico call
1-800-211-PANA (7262).
This warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO
DOES NOT COVER damages which occurred in shipment, or failures which are caused
by products not supplied by the warrantor, or failures which result from accidents, misuse,
abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line
surge, lightning damage, modification, or commercial use (such as in a hotel, office,
restaurant, or other business), rental use of the product, service by anyone other than a
Factory Service center or other Authorized Servicer, or damage that is attributable to acts
of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes
damages for lost time, travel to and from the servicer, loss of media or images, data or
other memory content. The items listed are not exclusive, but are for illustration only.) ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions may not
apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state. If a problem with this product develops during or after the warranty
period, you may contact your dealer or Service center. If the problem is not handled to
your satisfaction, then write to the warrantor’s Consumer Affairs Department at the
addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY ARE YOUR RESPONSIBILITY.
VQT2D42 (ENG)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make
Customer Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST
For hearing or speech impaired TTY users, TTY :1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all Panasonic
Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
PANASONIC SERVICE AND TECHNOLOGY COMPANY
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
For hearing or speech impaired TTY users, TTY :1-866-605-1277
Product Repairs (United States and Puerto Rico)
Panasonic Services Company
Customer Servicenter
Suite B
4900 George McVay Drive
McAllen, TX 78503
MAIL TO :
Important: Please include all supplied accessories and the original carton box
(if possible). To minimize the possibility of shipping damage, place
the original box and contents in a prepaid shipping carton, insured
for the full value of the camera. Include a detailed description of the
problem, proof of purchase, your return address and a daytime
phone number and/or E-mail address.
As of April 2009
(ENG) VQT2D42
33
Download from Www.Somanuals.com. All Manuals Search And Download.
• SDHC Logo is a trademark.
• QuickTime and the QuickTime logo are trademarks or registered trademarks
of Apple Inc., used under license therefrom.
• Microsoft product screen shot(s) reprinted with permission from Microsoft
Corporation.
• Other names, company names, and product names printed in these
instructions are trademarks or registered trademarks of the companies concerned.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Corporation 2009
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|