Panasonic DVD Player DMP BDT110 User Manual

Owner’s Manual  
Blu-ray DiscTM Player  
Model No. DMP-BDT310  
DMP-BDT215  
DMP-BDT210  
DMP-BDT110  
The illustration shows the image of DMP-BDT310.  
Dear customer  
Thank you for purchasing this product.  
For optimum performance and safety, please read these instructions carefully.  
Before connecting, operating or adjusting this product, please read the instructions completely.  
Please keep this manual for future reference.  
If you have any questions contact  
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)  
Canada : 1-800-561-5505  
P
PC  
PX  
VQT3B58-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
Getting started  
Settings  
IMPORTANT SAFETY  
Playback menu. . . . . . . . . . . . . . . . .27  
Setup menu . . . . . . . . . . . . . . . . . . .29  
INSTRUCTIONS. . . . . . . . . . . . . . . . 2  
Accessories. . . . . . . . . . . . . . . . . . . . 4  
Unit and media care . . . . . . . . . . . . . 4  
Control reference guide . . . . . . . . . . 5  
Playable discs/Cards/USB devices. . 6  
Reference  
Troubleshooting guide . . . . . . . . . . .34  
Messages. . . . . . . . . . . . . . . . . . . . .37  
Supplemental information . . . . . . . .38  
Specifications. . . . . . . . . . . . . . . . . .39  
Limited Warranty (ONLY FOR U.S.A.  
AND PUERTO RICO) . . . . . . . . . . .41  
Limited Warranty  
Connections & Settings  
STEP 1 : Connecting to a TV . . . . . . 8  
STEP 2 : Connecting to an amplifier/  
receiver . . . . . . . . . . . . . . . 9  
STEP 3 : Connecting to a broadband  
network . . . . . . . . . . . . . . 10  
(Only for CANADA) . . . . . . . . . . . . .42  
Referencia rápida en español  
STEP 4 : Connecting to an AC power  
source . . . . . . . . . . . . . . . 12  
STEP 5 : Settings . . . . . . . . . . . . . . 12  
(Spanish Quick Reference)  
[Para EE.UU. y Canadá] . . . . . . . . . . . . . . . .43  
Index . . . . . . . . . . . . . . . . . Back cover  
About descriptions in this Owner’s  
Manual  
Playback  
Instructions for operations are generally described  
using the remote control.  
This Owner’s Manual is applicable to models  
DMP-BDT310, DMP-BDT215, DMP-BDT210 and  
DMP-BDT110. Unless otherwise indicated, illustrations  
in this Owner’s Manual are of DMP-BDT310.  
[BDT310] [BDT215] [BDT210] [BDT110] : indicates features  
applicable to DMP-BDT310, DMP-BDT215,  
DMP-BDT210 and DMP-BDT110, respectively.  
Inserting or removing media . . . . . . 16  
HOME menu . . . . . . . . . . . . . . . . . . 16  
Playing video contents . . . . . . . . . . 17  
Enjoying 3D video. . . . . . . . . . . . . . 20  
Playing still pictures . . . . . . . . . . . . 21  
Playing music . . . . . . . . . . . . . . . . . 22  
Enjoying VIERA CASTTM. . . . . . . . . 23  
Playing contents saved on other  
About Firmware updates (15)  
equipment . . . . . . . . . . . . . . . . . . . . 24  
Linked operations with the TV  
(VIERA LinkTM “HDAVI ControlTM). . . . . . 26  
VQT3B58  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Unit and media care  
Check the supplied accessories before using this unit.  
Clean this unit with a soft, dry cloth  
1
Remote control  
Never use alcohol, paint thinner or benzine to clean this  
(N2QAYB000574)  
unit.  
2
1
Batteries for remote control  
Before using chemically treated cloth, carefully read the  
instructions that came with the cloth.  
AC power supply cord  
[For_U.S.A._and_Canada]  
(K2CB2CB00022)  
[For_units_with_PX_printed_on_the_outer_packaging]  
(K2CQ2CA00007)  
Clean the lens  
Use the lens cleaner (not supplied) to clean the unit’s lens.  
1
1
[For_units_with_PX_printed_on_the_outer_packaging]  
AC plug adaptor  
(K2DAYYY00002)  
Clean discs  
[BDT215] HDMI cable  
(K1HY19YY0012)  
DO NOT  
DO  
[For_Canada]  
The enclosed Canadian French label sheet corresponds to the English  
display on the front and back side of the unit.  
Wipe with a damp cloth and then wipe dry.  
Disc and card handling precautions  
Handle discs by the edges to avoid inadvertent scratches  
Product numbers provided in this Owner’s Manual correct as of  
December 2010. These may be subject to change.  
Do not use AC power supply cord with other equipment.  
[For_U.S.A._and_Puerto_Rico] : To order accessories, refer to  
“Accessory Purchases (United States and Puerto Rico)” on page 41.  
[For_other_areas] : To order accessories, call the dealer from whom  
you have made your purchase.  
or fingerprints on the disc.  
Do not attach labels or stickers to discs.  
Do not use record cleaning sprays, benzine, thinner, static  
electricity prevention liquids or any other solvent.  
Clean any dust, water, or foreign matter from the terminals  
on the rear side of the card.  
Do not use the following discs:  
– Discs with exposed adhesive from removed stickers or  
labels (rented discs etc).  
– Discs that are badly warped or cracked.  
– Irregularly shaped discs, such as heart shapes.  
Using the remote control  
Insert so the poles (i and j) match those in the remote  
control.  
To dispose or transfer this unit  
The unit may keep the user settings information in the unit. If  
you discard this unit either by disposal or transfer, then  
follow the procedure to return all the settings to the factory  
presets to delete the user settings. (34, “To return all  
settings to the factory preset.”)  
R6/LR6, AA  
(Alkaline or  
The operation history may be recorded in the memory of  
this unit.  
manganese batteries)  
Point it at remote control signal sensor on this unit. (5)  
Mishandling of batteries can cause electrolyte leakage which can damage  
items the fluid contacts and may cause a fire.  
Do not mix old and new batteries or different types at the same time.  
Do not heat or expose to flame.  
Do not leave the battery(ies) in a car exposed to direct sunlight for a  
long period of time with doors and windows closed.  
Do not take apart or short circuit.  
Do not attempt to recharge alkaline or manganese batteries.  
Do not use batteries if the covering has been peeled off.  
Remove batteries if the remote control is not going to be used for a long  
period of time. Store in a cool, dark place.  
CAUTION  
Danger of explosion if battery is incorrectly replaced. Replace only  
with the type recommended by the manufacturer.  
When disposing the batteries, please contact your local authorities  
or dealer and ask for the correct method of disposal.  
VQT3B58  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control reference guide  
1
2
Turn the unit on and off  
TV operation buttons  
9
You can operate the Panasonic TV through the unit’s  
remote control. (Depending on the TV these buttons  
may not work.)  
[Í TV POWER] : Turn the television on and off  
[AV] : Switch the input select  
10  
1
2
11  
[i j VOL] : Adjust the volume  
Select title numbers, etc./Enter numbers or characters  
(23)  
12  
3
13  
3
[CANCEL] : Cancel  
14  
15  
4
5
6
7
8
Basic playback control buttons (17)  
Show status messages (17)  
Show Pop-up menu/Top menu/Direct Navigator (17)  
Show sub menu (18)  
These buttons are used when;  
Operating a BD-Video disc that includes JavaTM  
applications (BD-J).  
4
Operating contents of VIERA CAST. (23)  
Transmit the remote control signal  
9
10 Open or close the disc tray (16)  
CAUTION  
5
6
16  
17  
Do not place objects in front of the unit. The disc tray  
may collide with objects when it is opened, and this may  
cause malfunction.  
18  
11 Show Playback menu (27)  
12 Start up a video communication (23)  
13 Setup 3D effects (20)  
14 Select audio (17)  
15 Show NETFLIX screen  
19  
20  
7
8
16 Exit the menu screen  
17 Displays the Home screen of the VIERA CAST (23)  
18 Show HOME menu (16)  
19 Selection/OK, Frame-by-frame (17)  
20 Return to previous screen  
12  
6
ヤモロロ  
SD CARD  
Pull to flip down  
the front panel.  
1
2
3
4
5 7  
8
9 10  
11  
7
Remote control signal sensor  
Distance: Within approx. 7 m (23 feet)  
Angle: Approx. 20e up and down, 30e left and right  
Display  
1
POWER button (POWER Í/I) (12)  
Press to switch the unit from on to standby mode or vice  
versa. In standby mode, the unit is still consuming a  
small amount of power.  
Disc tray (16)  
SD card slot (16)  
8
9
Stop (17)  
2
3
4
5
10 Start play (17)  
11 Open or close the disc tray (16)  
12 [BDT310] [BDT215] [BDT210] : Touch Free Sensor (33)  
The LED will light up when TOUCH-FREE SENSOR is  
activated.  
USB port (16)  
[BDT310] : V.OFF LED (Video off LED)  
It is possible to set the LED to turn on/off. (31)  
CALL LED (23)  
6
The LED will light up when this unit receives incoming  
call etc. of the video communication.  
Rear panel terminals (8–10, 12)  
VQT3B58  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playable discs/Cards/USB devices  
Playable contents  
Type Logo examples  
Type detail  
(39)  
BD-Video  
Video  
Video  
BD-RE  
BD-R  
JPEG/  
MPO (3D still picture)  
BD  
Video  
DivX® [BDT310/210_for_Canada]  
MKV  
DVD-Video  
Video  
Video  
AVCHD  
DVD-R  
DivX® [BDT310/210_for_Canada]  
MKV  
MP3  
DVD  
DVD-R DL  
DVD-RW  
JPEG/  
MPO (3D still picture)  
Video  
AVCHD  
+R/+RW/+R DL  
Music CD  
Music [CD-DA]  
DivX® [BDT310/210_for_Canada]  
MKV  
Music [CD-DA]  
MP3  
CD  
CD-R  
CD-RW  
JPEG/  
MPO (3D still picture)  
MPEG2  
AVCHD  
SD Memory Card (from 8 MB to 2 GB)  
SDHC Memory Card (from 4 GB to 32 GB)  
SD  
JPEG/  
SDXC Memory Card (48 GB, 64 GB)  
(Compatible with both mini and micro types)  
MPO (3D still picture)  
DivX® [BDT310/210_for_Canada]  
MKV  
MP3  
JPEG/  
USB devices  
(up to 2 TB)  
USB  
MPO (3D still picture)  
VQT3B58  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Discs that cannot be played in this  
Music CD  
Operation and sound quality of CDs that do not conform to  
CD-DA specifications (copy control CDs, etc.) cannot be  
guaranteed.  
The digital audio content side of a DualDisc does not meet  
the technical specifications of the Compact Disc Digital  
Audio (CD-DA) format so playback may not be possible.  
unit  
Any other disc that is not specifically supported or  
previously described.  
DVD-RAM  
Super Audio CD  
Photo CD  
DVD-Audio  
Video CD and Super Video CD  
WMA discs  
SD card  
[BDT310/210_for_other_than_Canada] [BDT215] [BDT110] :  
All types of DivX discs  
[BDT310/210_for_Canada] : DivX Plus HD discs  
PAL discs  
miniSD Cards, microSD Cards, microSDHC  
Cards and microSDXC Cards can be used,  
but must be used with an adaptor card.  
These are usually supplied with such cards,  
or otherwise customer provided.  
HD DVD  
BD-Video discs recorded at a rate of 50 fields/sec  
Keep the Memory Card out of reach of  
children to prevent swallowing.  
To protect the card’s contents, move the record prevention  
tab (on the SD card) to “LOCK”.  
Region management information  
BD-Video  
This unit plays BD-Video marked with labels containing the  
region code “A”.  
This unit is compatible with SD Memory Cards that meet  
SD Card Specifications FAT12 and FAT16 formats, as well  
as SDHC Memory Cards in FAT32 format (Does not  
support long file name.) and SDXC Memory Cards in  
exFAT.  
Example:  
If the SD card is used with incompatible computers or  
devices, recorded contents may be erased due to the card  
being formatted etc.  
Useable memory may be slightly less than the card  
capacity.  
DVD-Video  
This unit plays DVD-Video marked with labels containing the  
region number “1” or “ALL”.  
Example:  
USB device  
This unit does not guarantee connection with all USB  
devices.  
This unit does not support USB device charging.  
When using Communication Camera TY-CC10W or  
Wireless LAN Adaptor DY-WL10, connect it to the rear  
terminal of this unit. (10, 23)  
1
2
1
ALL  
4
FAT12, FAT16 and FAT32 file systems are supported.  
This unit supports USB 2.0 High Speed.  
Finalize  
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded  
by a recorder, etc. needs to be finalized by the recorder to  
play on this unit. Please refer to the recorder’s instructions.  
Although this unit can use USB 3.0 devices as USB 2.0  
devices, in certain cases USB 3.0 devices cannot be used  
due to differing connector shape, larger current ratings,etc.  
(Use of USB 2.0 devices is recommended.)  
This unit supports an HDD formatted in FAT32. If the HDD  
is not recognized the power to the HDD may not be  
supplied. Supply power from an external source.  
BD-Video  
This unit supports high bit rate audio (Dolby Digital Plus,  
Dolby TrueHD, DTS-HD High Resolution Audio and  
DTS-HD Master Audio) adopted in BD-Video.  
[BDT110] : If “Dolby D/Dolby D +/Dolby TrueHD” is set to  
“PCM”, the maximum possible number of Dolby sound is  
5.1ch PCM. (30)  
It may not be possible to play the above media in some cases due to the  
type of media, the condition of the recording, the recording method and  
how the files were created.  
The producers of the disc can control how discs are played, so you may  
not always be able to control play as described in this Owner’s Manual.  
Read the disc’s instructions carefully.  
3D  
3D videos and 3D still pictures can be played back when  
this unit is connected to a 3D compatible TV using a High  
Speed HDMI Cable.  
2D video can be enjoyed as 3D virtually. (20)  
VQT3B58  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 1 : Connecting to a TV  
Do not place the unit on amplifiers/receivers or equipment  
that may become hot. The heat can damage the unit.  
Before making any connections we suggest you  
temporarily disconnect all the units from AC power.  
Do not connect video signals through a video recorder.  
Due to copy guard protection the picture may not be  
displayed properly.  
Please use High Speed HDMI Cables that have the HDMI  
logo (as shown on the back cover). It is recommended that  
you use Panasonic’s HDMI cable. When outputting 1080p  
signal, please use HDMI cables 5.0 meters (16.4 ft.) or  
less.  
Recommended part number (High Speed HDMI Cable):  
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),  
RP-CDHS50 (5.0 m/16.4 ft.), etc.  
10BASE-T/100BASE-TX  
[BDT310]  
R
L
COMMUNICATION  
CAMERA  
AUDIO OUT  
VIDEO OUT  
AV OUT MAIN  
AV OUT SUB  
LAN  
[BDT215]  
[BDT210]  
10BASE-T/100BASE-TX  
COMMUNICATION  
CAMERA  
LAN  
[BDT110]  
COMMUNICATION 10BASE-T/100BASE-TX  
CAMERA  
WIRELESS LAN  
ADAPTOR  
LAN  
Back of the unit  
Via an HDMI AV OUT terminal (High quality)  
[BDT310] : Use HDMI AV OUT MAIN terminal.  
– It is possible to play back 3D videos and 3D still  
pictures by connecting this unit with a 3D compatible  
TV.  
Via a VIDEO OUT terminal (Standard quality)  
HDMI IN  
Audio/Video cable  
HDMI cable  
(Only supplied with  
DMP-BDT215)  
10BASE-T/100BASE-TX  
R
L
COMMUNICATION  
CAMERA  
COMMUNICATION  
CAMERA  
AUDIO OUT  
VIDEO OUT  
AV OUT MAIN  
AV OUT SUB  
LAN  
Set “HDMI Audio Output” to “On” (32).  
The HDMI connection supports VIERA Link “HDAVI  
Control” (26).  
Connect terminals of the same color.  
VQT3B58  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 2 : Connecting to an amplifier/receiver  
Via an HDMI AV OUT terminal  
[BDT310] : Use HDMI AV OUT  
MAIN terminal.  
[BDT310] : HDMI AV OUT SUB  
terminal  
You can enjoy richer sound by using  
the HDMI AV OUT SUB terminal.  
– It is possible to play back 3D  
videos and 3D still pictures when  
the connected TV is 3D  
Via an OPTICAL terminal  
– It is possible to play back 3D  
videos and 3D still pictures when  
the connected TV and amplifier/  
receiver are 3D compatible.  
compatible, even if the amplifier/  
receiver is not 3D compatible.  
Amplifier/receiver  
HDMI IN  
(ARC)  
HDMI IN  
OPTICAL IN  
HDMI cable  
HDMI cable  
Multi channel  
HDMI OUT  
00BASE-TX  
speakers  
(ARC)  
Optical cable  
AV OUT MAIN  
AV OUT SUB  
N
Amplifier/receiver  
HDMI cable  
HDMI IN  
HDMI cable  
(Only supplied with  
DMP-BDT215)  
Multi channel  
speakers  
HDMI IN  
10BASE-T/100BASE-TX  
ON  
T
MAIN  
AV OUT SUB  
AV OUT MAIN  
AV OUT  
S
LAN  
Amplifier/receiver  
32). Set “HDMI Audio Output” to “On”  
Set “HDMI Audio Output” to “On” (  
When connecting a TV (8) with  
HDMI AV OUT terminal, set “HDMI  
Audio Output” to “Off” (32).  
Set “Digital Audio Output” depending  
on the used terminal and connected  
amplifier/receiver (30).  
Set “Digital Audio Output” depending  
on the connected amplifier/receiver  
(30).  
The HDMI connection supports VIERA  
Link “HDAVI Control” (26).  
When connecting to a non-3D  
(32).  
Set “HDMI(SUB) Output Mode” to  
V.OFF”. (20)  
– Audio is output in high resolution  
regardless of compatibility of the  
amplifier/receiver with 3D.  
compatible amplifier/receiver, connect The HDMI connection using HDMI AV  
this unit to a TV via HDMI AV OUT,  
then connect the TV and the amplifier/  
receiver, using HDMI cables for the  
respective connections.  
– Please note, however, that the audio  
can only be up to 5.1ch.  
OUT MAIN supports VIERA Link  
“HDAVI Control” (26).  
The HDMI AV OUT SUB terminal is  
not compatible with the VIERA Link  
“HDAVI Control”.  
When using the TV or amplifier/  
receiver that does not have the  
indication of “(ARC)”  
(non-ARC-compatible) on the HDMI  
terminal, in order to enjoy TV’s sound  
by amplifier/receiver it is also required  
to connect the amplifier/receiver and  
TV using an optical digital cable.  
VQT3B58  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 3 : Connecting to a broadband network  
The following services can be used when this unit is  
connected to broadband.  
For details about connection method, refer to the  
instructions supplied with the connected equipment.  
Firmware can be updated (15)  
You can enjoy BD-Live (19)  
You can enjoy VIERA CAST (23)  
You can access other devices (Home Network) (24)  
LAN cable connection  
Wireless LAN connection  
[BDT310] [BDT215] [BDT210] : Wireless LAN is built in.  
(There is no need to connect a Wireless LAN  
Adaptor.)  
[BDT110] : Connect the Wireless LAN Adaptor  
DY-WL10 (optional).  
[BDT110]  
COMMUNICATION  
CAMERA  
10BASE-T/100BASE-TX  
10BASE-T/100BASE-TX  
WIRELESS LAN  
ADAPTOR  
COMMUNICATION  
COMMUNICATION  
LAN  
DEO OUT  
CAMERA  
AV OUT MAIN  
AV OUT SU  
LAN  
Wireless LAN Adaptor  
Wireless router, etc.  
LAN Cable  
Broadband router, etc.  
LAN Cable  
LAN Cable  
Modem  
(Broadband)  
*Provided by ISP  
Modem  
(Broadband)  
*Provided by ISP  
Use category 5 or above straight LAN cables (STP) when  
connecting to peripheral devices.  
For up to date compatibility information on your Wireless  
router refer to  
Inserting any cable other than a LAN cable in the LAN  
terminal can damage the unit.  
(This site is in English only.)  
For additional information about this unit refer to  
The unit is not compatible with public wireless LAN  
services provided in airports, stations, cafes etc.  
[BDT110]  
– Only the Wireless LAN Adaptor DY-WL10 (optional) can  
be used.  
– Read the operating instructions for the Wireless LAN  
Adaptor DY-WL10 (optional) thoroughly when using it.  
To simultaneously connect the Wireless LAN Adaptor  
DY-WL10 (optional) and a LAN cable, use the extension  
cable supplied with the DY-WL10.  
VQT3B58  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions of Wireless LAN connection  
[BDT310] [BDT215] [BDT210]  
The following limits are in place regarding the usage of this unit or  
Wireless LAN adaptor. You must be aware of these limits before using  
these devices.  
Panasonic will in no way be responsible for any incidental damage which  
may arise due to a failure to obey these limits, or to any condition of use or  
disuse of these devices.  
Data transmitted and received over radio waves may be  
intercepted and monitored.  
This unit or Wireless LAN adaptor contain delicate electronic  
components.  
Please use these devices in the manner in which it was intended and  
follow the following points:  
– Do not expose these devices to high temperatures or direct sunlight.  
– Do not bend, or subject these devices to strong impacts.  
– Keep these devices away from moisture.  
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA  
This device complies with Part 15 of FCC Rules and RSS-Gen of IC  
Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause interference, and (2) this device must  
accept any interference, including interference that may cause undesired  
operation of this device.  
Contains FCC ID: VPY-LBSJ or VPY-LBUN  
Contains IC: 772C-LBSJ or 772C-LBUN  
– The certification number of built-in module is displayed on the rear of  
the device.  
This transmitter must not be co-located or operated in conjunction with  
any other antenna or transmitter.  
– Do not disassemble or alter the device in any way.  
This product is restricted to indoor use due to its operation in the 5.15 to  
5.25 GHz frequency range.  
FCC and IC require this product to be used indoors for the frequency  
range 5.15 to 5.25 GHz to reduce the potential for harmful interference to  
co-channel Mobile Satellite systems. High power radars are allocated as  
primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.  
These radar stations can cause interference with and/or damage this  
product.  
This equipment complies with FCC/IC radiation exposure limits set forth  
for an uncontrolled environment and meets the FCC radio frequency (RF)  
Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC  
radio frequency (RF) Exposure rules. This equipment has very low levels  
of RF energy that it deemed to comply without maximum permissive  
exposure evaluation (MPE). But it is desirable that it should be installed  
and operated keeping the radiator at least 20cm or more away from  
person’s body (excluding extremities: hands, wrists, feet and ankles).  
THE FOLLOWING APPLIES ONLY IN THE U.S.A.  
FCC Note:  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio  
communications.  
However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC caution: To maintain compliance with FCC regulations, shielded  
interface cables must be used with this equipment. Operation with  
non-approved equipment or unshielded cables may result in interference  
to radio and TV reception. Any changes or modifications not approved by  
the party responsible for compliance could void the user’s authority to  
operate this equipment.  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received, including  
interference that may cause undesired operation.  
Responsible Party:  
Panasonic Corporation of North America  
One Panasonic Way  
Secaucus, NJ 07094  
Support Contact:  
Panasonic Consumer Electronics Company  
Telephone No.: 1-800-211-PANA (7262)  
THE FOLLOWING APPLIES ONLY IN CANADA.  
This Class B digital apparatus complies with Canadian ICES-003.  
VQT3B58  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 4 : Connecting to STEP 5 : Settings  
an AC power source  
Easy Setting  
After connecting your new player for the 1st time and  
pressing the power button, a screen for the basic settings  
will appear.  
R
Preparation  
Turn on the television and select the appropriate video  
COMMUNICATION  
AUDIO  
CAMERA  
input on the television.  
1
2
Press [Í POWER].  
AC power supply cord  
(supplied)  
Setup screen appears.  
If this unit is connected to a Panasonic TV (VIERA)  
supporting HDAVI Control 2 or later via an HDMI cable,  
then setting information on the TV such as “On-screen  
Language” is acquired by this unit.  
To a household AC outlet  
Follow the on-screen instructions and  
make the settings with [3, 4] and press  
[For_units_with_PX_printed_on_the_outer_packaging]  
[OK].  
If the power plug does not fit  
your AC outlet, use the power  
plug adaptor (supplied).  
If it still doesn’t fit, contact an  
electrical parts distributor for assistance.  
After completing “Easy Setting”, you can perform “Network  
Easy Setting”.  
This unit consumes a small amount of AC power (39)  
even when turned off. In the interest of power  
conservation, if you will not be using this unit for an  
extended period of time, it can be disconnected.  
You can perform this setup anytime by selecting “Easy Setting” in the  
Setup menu. (33)  
Touch Free Sensor [BDT310] [BDT215] [BDT210]  
By setting “Sensor” in “Touch Free Sensor” to “On”, you can open or close  
the tray just by waving your hand over the TOUCH-FREE SENSOR on the  
upper side of the unit. (This will also work when in stand-by.)  
Be aware that the TOUCH-FREE SENSOR may function unintentionally  
in the following cases:  
Install this unit so that the power cord can be unplugged from the  
socket outlet immediately if any problem occurs.  
– When your hand or arm, an object, a small child, or a small animal  
comes close to the upper part of the unit  
– When an object is placed on top of the unit and vibration is applied  
– When connecting a cable etc. to the rear of the unit  
Reactive distance of the sensor is automatically set in accordance with  
the installation conditions at the time of power supply connection and  
when the open/close button is pressed. To prevent an incorrect setting,  
do not place your hands or objects above the unit at these times.  
Depending on the usage conditions, the TOUCH-FREE SENSOR may  
stop working or the reactive distance may become shorter. In such  
cases, press the tray open/close button once.  
VQT3B58  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DMP-BDT110_210_VQT3B58_eng.book 13 ページ 2011年5月17日 火曜日 午後4時43分  
“Search for wireless network”  
The available wireless networks will be displayed.  
Network Easy Setting  
1
Select your network name and press [OK].  
The configuration of your network is about to begin. If you  
failed to make the settings, refer to page 14.  
If your network name is not displayed search again by  
pressing the [R] button on the remote control. Stealth  
SSID will not be displayed, in this case enter manually.  
Wired connection  
Wireless Settings  
Select a wireless network for connection.  
Select “Wired” and press [OK].  
Network name (SSID)  
XXXXXXXXXX  
Reception  
[BDT310]  
XXXXXXXXXX  
XXXXXXXXXX  
Network Easy Setting  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
Select a connection mode.  
Current setting  
:
Wired  
XXXXXXXXXX  
LAN cable connection:  
Connect a LAN cable to the unit and select "Wired."  
Wireless LAN connection:  
Select "Wireless."  
OK  
Search again  
R
G
B
Y
SUB  
RETURN  
MENU  
When your wireless network is encrypted  
Wired  
2
Press [OK] to select “Encryption Key”.  
Wireless  
OK  
Wireless Settings  
RETURN  
Enter the encryption key of the wireless network.  
Follow the on-screen instructions to make your connection  
settings.  
Encryption Key  
Set  
Wireless connection  
3
Enter your encryption key.  
Encryption Key  
_
Preparation  
Obtain your network name (15, SSID).  
1
2
3
4
5
6
7
8
9
0
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
,
3
C
F
I
4
5
a
d
g
j
6
b
e
h
k
n
q
u
x
7
c
f
8
+
9
-
0
*
If your wireless connection is encrypted please be  
sure that you know your encryption key.  
[BDT110] : If “Wireless LAN Adaptor is not connected.” is  
displayed, check that the Wireless LAN Adaptor is fully  
inserted. Alternatively, disconnect and reconnect it. If there  
is still no change in the display, consult your dealer for  
advice.  
%
&
/
#
<
[
=
$
>
]
i
Delete  
l
@
_
L
m
p
t
o
r
M
P
T
W
.
O
R
V
Y
?
Finish  
s
{
(
)
~
S
v
y
:
}
w
z
;
\
I
Z
!
`
^
OK  
Space  
0
-
9
RETURN  
1
2
Select “Wireless” and press [OK].  
To enter SSID manually  
If your SSID is not displayed in step 1, follow these steps.  
Select “Search for wireless network” or  
1
To display SSID input screen :  
Press [HOME] select “Setup” select “Player  
Settings” select “Network” [OK] select “Network  
Settings” [OK] select “Wireless Settings” [OK] ꢀ  
select “Connection Setting”[OK] select “Manual  
setting” [OK]  
“WPS (PUSH button method)” and press  
[OK] then follow the on-screen  
instructions and make the settings.  
Wireless Settings  
2
Press [OK] to select “SSID” and enter your SSID.  
Select a connection method.  
Please refer to the operating instructions of your wireless  
access point about connection methods.  
Wireless Settings  
Enter your network name (SSID) to connect.  
Search for wireless network  
WPS (PUSH button method)  
SSID  
Set  
“WPS (PUSH button method)”  
If you are using a Wireless router that supports WPS (Wi-Fi  
If your wireless network is encrypted, go to step 2.  
Protected Setup), you can easily perform the settings.  
VQT3B58  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Network Easy Setting  
(Home Network Connection Check)  
When you experience  
problems with settings  
Network Easy Setting (Home Network Connection Check)  
Complete.  
1. LAN cable connection  
2. IP address setting  
3. Connection to gateway  
: Fail  
: Fail  
: Fail  
Wireless Settings  
LAN cable is not connected.  
Please check the connection.  
Wireless Settings  
Select “Yes” and press [OK] to check network  
connection again. Select “No” and press [OK]  
to finish Network Easy Setting.  
Failed to complete.  
A conflict with another device occurred.  
Do you want to configure wireless network connection  
setting again ?  
Yes  
OK  
No  
Check the  
following  
Yes  
No  
Display  
OK  
1. LAN cable connection or  
Wireless setting  
Connectionof  
the LAN  
: Fail  
cables (10)  
Display  
Check the following  
2. IP address setting  
: Fail  
: Fail  
A conflict with another  
device occurred.  
Please wait a few moments,  
and then try again.  
3. Connection to gateway  
1. LAN cable connection or  
Wireless setting  
Connection  
and settings  
of the hub  
and router  
Settings of  
“IP Address/  
DNS  
: Pass  
Setting of the Wireless router  
for MAC Address etc.  
2. IP address setting  
: Fail  
: Fail  
A time out error  
occurred.  
The signal may be weak.  
[BDT110] : Using the USB  
extension cable supplied with  
the Wireless LAN Adaptor,  
adjust the position of the  
Wireless LAN Adaptor.  
The SSID (15) and the  
encryption key of the Wireless  
router.  
3. Connection to gateway  
1. LAN cable connection or  
Wireless setting  
: Pass  
: Pass or  
Home  
network  
available  
Settings”  
(32)  
2. IP address setting  
An authentication error  
or a time out error  
occurred.  
3. Connection to gateway  
: Fail  
Please wait a few moments,  
and then try again.  
Network Easy Setting (Internet Connection Check)  
[BDT110] : Connection of  
Wireless LAN Adaptor  
A device error occurred. Contact our Customer  
Service Center or your  
Network Easy Setting (Internet Connection Check)  
Complete.  
- Connection to the Internet  
:
Fail(Error code: B019)  
nearest dealer.  
Failed the connection test.  
Cannot find the server.(Error code: B019)  
Please refer to the owner's manual for the cause of  
the error and the solution for it.  
Press [OK].  
OK  
Display  
Check the following  
Cannot find the  
server.  
(Error code: B019)  
“Primary DNS” and “Secondary  
DNS” settings of “IP Address/  
DNS Settings” (32)  
The server may be busy or the  
service may have been  
suspended. Please wait a few  
moments, and then try again.  
Settings of “Proxy Server  
Settings” (32) and the router  
Failed to connect to  
the server.  
(Error code: B020)  
VQT3B58  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Firmware updates  
Refer to the operating instructions of the hub or router.  
WPS (Wi-Fi Protected Setup) is a standard that facilitates settings  
relating to the connection and security of wireless LAN devices. To see  
whether your Wireless router supports WPS, check the Wireless router  
operating instructions.  
Occasionally, Panasonic may release updated firmware for  
this unit that may add or improve the way a feature  
operates. These updates are available free of charge.  
You can perform this setup anytime by selecting “Network Easy Setting”  
in the Setup menu. (32)  
You can redo these settings individually using “Network Settings”.  
(32)  
This unit is capable of checking the firmware automatically  
when connected to the Internet via a broadband connection.  
When a new firmware version is available, the following  
message is displayed.  
Do not use this unit or Wireless LAN adaptor to connect to any wireless  
network for which you do not have usage rights.  
During automatic searches in a wireless network environment,  
wireless networks (SSID*) for which you do not have usage rights  
may be displayed; however, using these networks may be regarded  
as illegal access.  
After performing network settings on this unit, the settings (encryption  
level, etc.) of the Wireless router might change. When you have trouble  
getting online on your PC, perform the network settings on your PC in  
accordance with the settings of Wireless router.  
Please be aware that connecting to a network without encryption may  
result in the content of the communication being illegitimately viewed by  
a third party, or the leaking of data such as personal or secret  
information.  
New firmware is available.  
Please update firmware in Setup.  
To update the firmware  
Press [HOME] select “Setup” select “Player  
Settings” select “Others” [OK] select “Firmware  
Update” [OK] select “Update Now”  
* An SSID (Service Set IDentification) is a name used by wireless LAN  
to identify a particular network. Transmission is possible if the SSID  
matches for both devices.  
DO NOT DISCONNECT the unit from the AC power or  
perform any operation while the update takes place.  
After the firmware is installed, “FINISH” will be displayed on  
the unit’s display. Unit will restart and the following screen  
will be displayed.  
Reprogramming the remote  
control  
The firmware was updated.  
Current Version: x.xx  
OK  
If you have more than one Panasonic player/recorder and  
the remote control operates both products at once, you will  
need to change the remote control code on one product to  
prevent this occurrence. (33, “Remote Control Code”)  
RETURN  
If downloading on this unit fails or this unit is not connected to the  
Internet, then you can download the latest firmware from the  
following website and burn it to a CD-R to update the firmware.  
(This site is in English only.)  
To show the firmware version on this unit. (33, “System  
Information”)  
Downloading will require several minutes. It may take longer or  
may not work properly depending on the connection environment.  
If you do not want to check for the latest firmware version, set  
“Automatic Update Check” to “Off”. (33)  
VQT3B58  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Inserting or removing  
media  
HOME menu  
Major functions of this unit can be operated from the HOME  
menu.  
Preparation  
Turn on the television and select the appropriate video input  
on the television.  
CALL  
SD CARD  
1
[BDT310]  
[BDT215]  
[BDT210]  
1
2
Press [Í POWER] to turn on the unit.  
When inserting a media item, ensure that it is facing the  
right way up.  
When removing the SD card, press on the center of the  
card and pull it straight out.  
If you connect a Panasonic product with a USB  
connection cable, the setup screen may be displayed on  
the connected equipment. For details, refer to the  
instructions for the connected equipment.  
Press [OK] or [3, 4, 2, 1] to select the  
item.  
HOME  
Blu-ray Disc Player  
Setup  
Photos  
Music  
Videos  
When a media is inserted, contents selection screen  
for that media is displayed.  
If there are any other items, repeat this step.  
To return to HOME menu, select “HOME” or press  
[RETURN] several times.  
Play back the contents.  
(17, 21, 22)  
Disc  
Videos/  
Photos/  
Music  
SD card  
USB  
When multiple contents are  
recorded, select the types  
of contents or the title.  
Internet  
Content  
Displays the Home screen of  
VIERA CAST. (23)  
Network  
Setup  
DLNA Client (24)  
Home  
Network  
Media Renderer (25)  
Player  
Settings  
(29)  
SD Card  
Management  
(19)  
Changes the screen  
background of HOME menu.  
Wallpaper  
To show the HOME menu  
Press [HOME].  
Items to be displayed may vary with the media.  
VQT3B58  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing video contents  
Other operations during play  
These functions may not work depending on the media and  
contents.  
BD DVD CD SD USB  
1
2
Insert the media.  
Stop  
If the menu is displayed, press [3, 4, 2, 1] to select  
the item. (16)  
Press [STOP].  
The stopped position is memorized.  
Press [3, 4] to select the title and press  
Resume play function  
Press [1PLAY] to restart from this position.  
[OK].  
The position is cleared if the tray is opened or you press  
STOP] several times to display “STOP” on the unit’s display.  
When a message screen is displayed while playing back  
3D compatible video software, play back in accordance  
with the instructions.  
[∫  
On BD-Video discs including BD-J, the resume play  
function does not work.  
To show menus  
You can show Top Menu, Direct Navigator or Pop-up Menu.  
Pause  
Press [POP-UP MENU/TOP MENU].  
Press [3, 4, 2, 1] to select the item and press [OK].  
Press [;PAUSE].  
Press [;PAUSE] again or [1PLAY] to restart play.  
To show the status messages  
While playing, press [STATUS].  
Search/Slow-motion  
The status messages give you information about what is  
currently being played. Each time you press [STATUS], the  
display information may change or will disappear from the  
screen.  
Search  
While playing, press [SEARCH6] or  
[SEARCH5].  
Music and MP3: The speed is fixed to a single step.  
e.g.BD-Video  
Slow-motion  
T: Title, C: Chapter, PL: Playlist  
While paused, press [SEARCH6] or  
Elapsed time in the title  
[SEARCH5].  
BD-Video and AVCHD: Forward direction [SEARCH5]  
only.  
BD-Video  
T1 C1 0:05.14  
Play  
0:20.52  
The speed increases up to 5 steps.  
Press [1PLAY] to revert to normal playback speed.  
Current position  
Total time  
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.  
Press [STOP] when you have finished playback to protect the unit’s  
motor, your television screen and so on.  
Skip  
Depending on media and contents, the display may change or may not  
appear.  
While playing or paused, press [:] or  
[9].  
DivX [BDT310/210_for_Canada] and MKV: Successive play is not  
possible.  
Skip to the title, chapter or track you want to play.  
It is not possible to playback AVCHD and MPEG2 video which have   
been dragged and dropped, copied and pasted to the media.  
To save on electricity, the power is turned off automatically if there is no  
button operation for about 30 minutes when not playing back (such as  
when paused, displaying the menu, displaying still pictures, etc.).  
(Compatible with ENERGY STAR)  
Each press increases the number of skips.  
Frame-by-frame  
While paused, press [2] (2;) or [1] (;1).  
Press and hold to change in succession forward or  
backward.  
Press [1PLAY] to revert to normal playback speed.  
BD-Video and AVCHD: Forward direction [1] (;1) only.  
Changing audio  
Press [AUDIO].  
You can change the audio channel number or soundtrack  
language, etc.  
VQT3B58  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful functions  
Regarding DivX  
[BDT310/210_for_Canada]  
1
2
Press [SUB MENU].  
ABOUT DIVX VIDEO:  
DivX® is a digital video format created by DivX, Inc. This is  
Select an item, then press [OK].  
an official DivX Certified® device that plays DivX video. Visit  
divx.com for more information and software tools to convert  
your files into DivX video.  
While Direct Navigator screen is displayed  
To display the titles properties (recording  
date, etc.).  
Properties  
ABOUT DIVX VIDEO-ON-DEMAND:  
This DivX Certified® device must be registered in order to  
play purchased DivX Video-on-Demand (VOD) movies.  
To obtain your registration code, locate the DivX VOD  
section in your device setup menu.  
View  
Chapters  
To select the chapter.  
View  
Playlists  
To play playlists.  
Go to vod.divx.com for more information on how to complete  
your registration.  
Video images of the copyright-protected DivX contents  
stored on USB device can be output only through the  
HDMI output terminal.  
View Titles  
To select the title.  
Select  
Folder  
To switch to another folder.  
While playing  
Display the unit’s registration code.  
(33, “DivX Registration” in “Others”)  
When black bars are shown at the top,  
bottom, left, and right sides of the screen,  
you can enlarge the image to fill the  
screen.  
Screen  
Aspect  
DivX Registration  
The registration code is necessary to  
register this unit to play protected  
DivX videos.  
Top Menu  
To display Top Menu.  
Pop-up  
Menu  
To display Pop-up Menu.  
10 alphanumeric  
characters  
Registration Code: XXXXXXXXXX  
Menu  
To display Menu.  
2D video can be virtually output as 3D, or  
3D Settings output effect of the 3D video can be setup.  
(20)  
Depending on the played contents if you perform “Screen  
Aspect”, there may be no effect.  
When “TV Aspect” (31) is set to “4:3 Pan & Scan” or  
“4:3 Letterbox”, the “Zoom” effect in “Screen Aspect” is  
disabled.  
After playing DivX VOD content for the first time, the  
registration code is not displayed.  
If you purchase DivX VOD content using a registration  
code different from this unit’s code, you will not be able to  
play this content.  
Cancel the unit’s registration.  
Depending on the media and contents, displayed items are different.  
(33, “DivX Registration” in “Others”)  
Press [2, 1] to select “Yes” in “DivX Registration”.  
Use the deregistration code to cancel the registration in  
Displaying subtitle text  
You can display subtitle text on the  
Regarding DivX VOD content that can only  
DivX [BDT310/210_for_Canada] and MKV video disc with this  
unit. The operation might be different or it may not operate  
properly depending on the way the file was made or the  
state of this unit (playing, stopped, etc.).  
be played a set number of times  
Some DivX VOD contents can only be played a set number  
of times. When you play this content, the number of times  
already played and initially playable number of times is  
displayed.  
Set “Subtitle” in “Disc” (27)  
The remaining number of plays decreases each time a  
program is played. However, when playing from the point  
where play was previously stopped, the remaining number  
of plays does not decrease due to the resume play  
function.  
DivX and MKV video files that do not display “Text” do not contain  
subtitle text.  
If the subtitle text is not displayed correctly, try changing the language  
settings. (29)  
This function has no relation to the subtitles specified in DivX standard  
specifications and has no clear standard.  
VQT3B58  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing picture-in-picture  
Enjoying BD-Live or  
picture-in-picture in BD-Video  
To turn on/off secondary video and audio  
[DISPLAY] select “Disc” [1] select  
“Signal Type” [OK] set “Video” and  
“Soundtrack” in “Secondary Video” to “On”  
or “Off”  
Enjoying BD-Live discs with  
Internet  
BD-Live allows you to enjoy more functions such as  
subtitles, exclusive images and online games by connecting  
this unit to the Internet. Since most of the BD-Live  
compatible discs are played back using the BD-Live  
function, additional contents are required to be downloaded  
into the external memory (local storage).  
Secondary video  
This unit is using an SD card as a local storage device.  
BD-Live function cannot be used when there is no SD card  
inserted.  
1
2
3
Perform network connection and  
settings. (10, 13)  
Insert an SD card with 1 GB or more free  
space.  
Primary video  
Insert the disc.  
The usable functions and the operating method may vary with each  
disc, please refer to the instructions on the disc and/or visit their  
website.  
Some BD-Live content available on the Blu-ray discs may require an  
Internet account to be created in order to access the BD-Live content.  
Follow the screen display or instruction manual of the disc for  
information on acquiring an account.  
To use BD-Live function, it is recommended that you format the card on  
this unit. If the SD card you use is formatted, all data on the card will be  
erased. It cannot be recovered.  
Deleting data/Formatting SD cards  
If you no longer need data recorded on the SD card, you can  
delete data with the following operation.  
“BD-Live Internet Access” may need to be changed for certain discs  
(29).  
When discs supporting BD-Live are played back, the player or disc IDs  
may be sent to the content provider via the Internet.  
During search/slow-motion or frame-by-frame, only the primary video is  
displayed.  
1
2
3
4
5
Insert an SD card.  
Press [HOME].  
Press [OK] to select “Setup”.  
Press [1] to select “SD Card Management”.  
Press [3, 4] to select “BD-Video Data Erase” or  
“Format SD Card” and press [OK].  
When “BD-Video Secondary Audio” in “Digital Audio Output” is set to  
“Off”, secondary audio will not be played (30).  
SD Card Management  
No. of Files  
6
SD card  
Free space 300 MB  
BD-Video Data Erase  
Format SD Card  
OK  
Format this SD Card.  
RETURN  
6
7
Press [2, 1] to select “Yes” and press [OK].  
Press [2, 1] to select “Start” and press [OK].  
VQT3B58  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoying 3D video  
You can enjoy powerful 3D videos with realistic sensations  
by connecting this unit with a High Speed HDMI Cable to a  
3D compatible TV.  
Useful functions  
1
2
While playing  
Press [  
].  
Select an item, then press [OK].  
Original  
Side by  
Keep original picture format.  
Signal  
3D picture format comprising of  
left and right screens.  
Format side  
2D to 3D  
Converts 2D pictures to 3D effect.  
Playback pictures with normal 3D  
effects.  
Normal  
Soft  
You can enjoy 3D pictures with a  
feeling of broadness, holding  
back the depth perception.  
The image is an illustration.  
Preparation  
Connect 3D compatible TV to an HDMI AV OUT terminal of  
this unit using a High Speed HDMI Cable. (8, 9)  
Set 3D effect manually.  
Perform the necessary preparations for the TV.  
Distance  
Set the amount of depth  
perception.  
Screen Type  
Selects how the screen appears  
during 3D playback (flat or  
round).  
3D  
Picture  
Mode  
Method of playback is the same as normal disc playback.  
(17)  
Playback following the instructions displayed on the  
screen.  
Manual  
Settings  
Frame Width  
Set the amount of feathering at  
the edge of screen.  
Frame Color  
3D settings  
Set the color of feathering at the  
edge of screen.  
Perform the following settings as necessary.  
It is also possible to play back 3D  
3D BD-Video  
It appears also by pressing [SUB MENU] and selecting “3D  
Settings”.  
discs in 2D (conventional video).  
Playback  
(29)  
If 3D video cannot be played back in  
3D, change the settings as required  
by the connected TV format. (31)  
Change the settings for 3D on the  
TV also when “Checker board” or  
“Side by side” is selected.  
Depending on the contents, displayed items are different.  
Please refrain from viewing 3D images if you do not feel well or are  
experiencing visual fatigue.  
In the event that you experience dizziness, nausea, or other discomfort  
while viewing 3D images, discontinue use and rest your eyes.  
Depending on the connected TV, the video being played back might  
switch to 2D video due to changes in resolution etc. Check the 3D  
setting on the TV.  
3D Type  
If the amplifier/receiver is connected  
3D images may not output as settings of “HDMI Resolution” and “24p  
Output”. (31)  
[BDT310]  
HDMI(SUB)  
Output Mode  
to the HDMI AV OUT SUB terminal  
(9), set to “V.OFF”. (31)  
HDMI (SUB) V.OFF LED on this unit  
will light. (31)  
3D Playback  
Precautions  
Hide the 3D viewing warning screen.  
(31)  
Adjust the pop-up position for the  
Playback menu or message screen  
etc. (28)  
Pop-Out Level  
VQT3B58  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing still pictures  
Useful functions  
BD DVD CD SD USB  
1
2
Press [SUB MENU].  
(BD-RE, DVD-R/-R DL, CD-R/RW, SD Card, USB device)  
Select an item, then press [OK].  
In order to play back 3D still pictures (MPO), this unit should  
be connected to a Full HD 3D compatible TV via an HDMI  
terminal.  
While Photo View screen is displayed  
Start Slideshow  
You can display still pictures one by one at a  
1
2
Insert the media.  
constant interval.  
Display Interval  
Change the display interval.  
Transition Effect  
Set display method.  
Repeat Play  
Repeat slideshow.  
Random Soundtrack  
Background music is played in random  
order.  
If the menu is displayed, press [3, 4, 2, 1] to select  
the item. (16)  
Press [3, 4] to select the folder and  
press [OK].  
Slideshow  
“3D View” : 3D still pictures (MPO) are sorted here. To  
play back in 3D, select from “3D View”. (Still pictures in  
“2D View” are played back in 2D)  
Soundtrack  
Photo View  
SD card  
An MP3 on the USB device can be played  
back during the slideshow of JPEG on the  
USB device or the SD card. (A music CD  
also can be played back during the  
slideshow of JPEG on the SD card.)  
3D View  
2D View  
Folder Name  
XXXXXXXX  
Photos  
42  
XXXX  
105  
58  
77  
48  
5
XXXXXXXX  
XXXXXXXX  
XXXXXXXX  
XXXXXXXX  
While playing  
OK  
Page Up  
Select  
Page Down  
Y
Page01/02  
SUB  
MENU  
RETURN  
Start  
Slideshow  
Start the slideshow.  
Slideshow  
R
G
B
Screen  
Aspect  
To select folders or still pictures that are played on  
slideshow.  
Switch the screen mode.  
Status  
Show the still picture properties.  
3
Press [3, 4, 2, 1] to select the still  
Rotate Right  
Rotate Left  
Rotate the still picture.  
picture and press [OK].  
Set the still picture to the wallpaper of  
HOME screen. (16)  
Press [2, 1] to display the previous or next still picture.  
Wallpaper  
To exit the screen  
Press [POP-UP MENU/TOP MENU].  
Pop-up position for the Playback menu or  
message screen etc. can be adjusted during  
3D playback.  
Pop-Out  
Level  
To show the still picture properties  
Depending on the condition of the unit and media contents, displayed  
items are different.  
When a still picture with large number of pixels is played, the display  
interval may become longer. Even if the setting is changed, the display  
interval may not become shorter.  
When both the music CD and the USB device with recorded MP3 is  
inserted into this unit, the music CD has priority to be played back as  
background music.  
While playing, press [STATUS] once or twice.  
1 / 26  
Date  
Size  
11/12/2007  
500 x 375  
Manufacturer  
Equipment  
Still pictures displayed as “  
” cannot be played back with this unit.  
To exit the screen  
Press [STATUS].  
VQT3B58  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing music  
DVD CD USB  
(DVD-R/-R DL, music CD, CD-R/RW, USB device)  
1
2
Insert the media.  
If the menu is displayed, press [3, 4, 2, 1] to select  
the item. (16)  
Press [3, 4] to select the track and press  
[OK].  
0.09  
4.30  
DIRECT NAVIGATOR  
CD  
Music list  
Track1  
5 Tracks / Total Play Time 20min54sec  
No.  
Track Name Play Time  
4min30sec  
3min41sec  
4min30sec  
3min11sec  
5min 2sec  
01  
02  
03  
04  
05  
Track1  
Track2  
Track3  
Track4  
Track5  
Play  
RETURN  
” indicates the track currently playing.  
Playing a track in another  
folder  
1
2
While the Direct Navigator screen is displayed  
Press [SUB MENU].  
Press [3, 4] to select “Select Folder”  
and press [OK].  
You cannot select folders that contain no compatible tracks.  
VQT3B58  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To exit from VIERA CAST  
Press [EXIT], [HOME] or [POP-UP MENU/TOP MENU].  
Enjoying VIERA CASTTM  
You can access a selection of Internet services from the  
Home screen with VIERA CAST, for example YouTube,  
Picasa Web Albums. (Current as of December 2010)  
When playing content from a disc/SD card and/or USB device VIERA  
CAST cannot be accessed by pressing [VIERA CAST].  
In the following cases, settings are possible using “Internet Content  
Settings” (32)  
– When restricting the use of VIERA CAST.  
– When the audio is distorted.  
Preparation  
Network connection (10)  
Network setting (13)  
– When wrong time is displayed  
To enjoy video communication (ex. SkypeTM) :  
Connect this unit with optional Communication Camera  
(TY-CC10W or compatible equipment).  
Depending on the area, this optional camera may not be  
available. Please consult your local Panasonic dealer for  
advice.  
If using slow Internet connection, the video may not be displayed  
correctly. A high-speed Internet service with a speed of at least 6 Mbps  
is recommended.  
Be sure to update the firmware when a firmware update notice is  
displayed on the screen. If the firmware is not updated, you will not be  
able to use the VIERA CAST function. (15)  
VIERA CASTTM home screen is subject to change without notice.  
The services through VIERA CASTTM are operated by their respective  
service providers, and service may be discontinued either temporarily or  
permanently without notice. Therefore, Panasonic will make no warranty  
for the content or the continuity of the services.  
10BASE-T/100BASE-TX  
R
L
All features of websites or content of the service may not be available.  
Some content may be inappropriate for some viewers.  
ATION  
RA  
AUDIO OUT  
VIDEO OUT  
AV OUT MAIN  
AV OUT SUB  
LAN  
Some content may only be available for specific countries and may be  
presented in specific languages.  
Back of the unit  
Communication Camera  
TY-CC10W  
[BDT110] : When this unit is connected by wireless LAN  
connection, connect the Communication Camera via the  
USB port on the front of this unit.  
For operating method refer to the following website.  
(This site is in English only.)  
1
2
Press [VIERA CAST].  
The video communication service can be accessed  
directly by pressing [  
] button, and NETFLIX can be  
accessed directly by [NETFLIX] button.  
Message is displayed. Please read these instructions  
carefully and then press [OK].  
Press [3, 4, 2, 1] to select the item and  
press [OK].  
Operable buttons:  
[3, 4, 2, 1], [OK], [RETURN], colored buttons,  
number buttons  
VIERA CAST Home screen;  
Weather  
New York, NY  
NW 10  
69°  
mph  
TOMORROW  
H
L
76°  
56°  
XXXXXX  
XXXXXX  
Featured Photos  
Featured Videos  
XXXXXXXXXXX  
MORE  
BACK  
Hit Movies  
Top TV Shows  
Watch Instantly  
Images are for illustration purposes, contents may  
change without notice.  
VQT3B58  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing contents saved  
on other equipment  
Playing back contents on the  
DLNA server (DLNA)  
It is possible to play back the video, still pictures, and music  
in the shared folder of the Windows 7 operating system.  
You can enjoy viewing a content saved on other equipment  
(Windows 7 operating system, smartphone, etc.) connected  
to the home network with this unit.  
Preparation  
Perform steps 1and 2.  
3
Add the contents and folder to the Windows Media®  
Player library.  
Playlist of Windows Media® Player can play back only  
the contents that are stored in the libraries.  
Preparation  
1
Perform network connection and network settings of this  
unit. (10, 13)  
2
Perform Home Network settings of the connected  
equipment.  
1
2
3
4
Press [HOME].  
For details about the setting and operation method of  
connected equipment, and compatible equipment, refer  
to the following Website and the operating instructions for  
each item of equipment.  
(This site is in English only.)  
Press [3] to select “Network”.  
Press [3] to select “Home Network”.  
Press [3] to select “DLNA Client”.  
A list of equipment connected via the network is  
displayed.  
This list can be updated by pressing [R] on the remote  
control.  
e.g.  
DLNA Client  
XXXXXX  
OK  
RETURN  
Servers found on the network are displayed.  
Please select one.  
Update  
5
6
Press [3, 4] to select the equipment to  
playback the contents, and press [OK].  
Press [3, 4, 2, 1] to select the item to  
playback (folder), and press [OK].  
You may be able to use convenient functions  
depending on the disc or content by pressing  
[SUB MENU] or [DISPLAY].  
Control Panel is displayed once  
the playback starts.  
Operation can be performed  
with [3, 4, 2, 1], [OK] and  
[EXIT].  
Control Panel  
e.g.  
EXIT  
Press [OK] if the Control Panel  
is not displayed.  
Press [RETURN] to hide the Control Panel.  
To exit from Home Network  
Press [EXIT], [HOME] or [POP-UP MENU/TOP MENU].  
VQT3B58  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Play back the contents in the  
DLNA server using DMC  
It is possible to play back the video or still pictures in the  
shared folder of the DLNA server by controlling with DLNA  
DMC (Digital Media Controller) compatible equipment.  
Windows Media® Player and a smartphone that has the  
compatible application serve as the DLNA server and the  
DMC.  
Ensure that the router for your home network has adequate security  
system to prevent unauthorized access.  
Menu structure will be different depending on the equipment connected  
to this unit. Select the contents by repeating the operation.  
Depending on the contents and the connected equipment, playback  
may not be possible.  
Items displayed in gray on the display cannot be played back by this  
unit.  
This unit can be played back via connected equipment only when  
controlled using DMC.  
Depending on the performance of the connected PC, video frames may  
be dropped during playback, or video may not playback at all.  
Preparation  
Perform steps 1and 2. (24)  
3
Add the contents and folder to the libraries of the  
Windows Media® Player or the smartphone, etc.  
Playlist of Windows Media® Player can play back only  
the contents that are stored in the libraries.  
Perform the “Remote Device Settings”. (33)  
The maximum number of equipment that can be  
registered is 16.  
4
1
2
3
4
5
Press [HOME].  
Press [3] to select “Network”.  
Press [3] to select “Home Network”.  
Press [1] to select “Media Renderer”.  
Operate the DMC compatible equipment.  
To exit from Media Renderer screen  
Press [HOME].  
VQT3B58  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Linked operations with  
the TV  
Power off link  
(VIERA LinkTM “HDAVI ControlTM”)  
All connected equipment compatible with “HDAVI Control”,  
including this unit, automatically turns off when you switch  
the television off.  
What is VIERA Link “HDAVI Control”?  
VIERA LinkTM is a new name for EZ SyncTM  
.
Playing music continuously even after turning off power  
to the television  
When the unit is connected to a Panasonic TV (VIERA) that  
supports HDAVI Control 2 or later and an amplifier/receiver  
supports VIERA Link.  
VIERA Link “HDAVI Control” is a convenient function  
that offers linked operations of this unit, and a  
Panasonic TV (VIERA) or amplifier/receiver under  
“HDAVI Control”.  
You can use this function by connecting the  
equipment with an HDMI cable*. See the operating  
instructions for connected equipment for operational  
details.  
1
While playing music  
Press [SUB MENU].  
Press [3, 4] to select “TV Power” and press [OK].  
2
* [BDT310] : Only when connecting via an HDMI AV OUT  
Easy control only with VIERA  
remote control  
MAIN terminal on this unit.  
Preparation  
1
2
3
Set “VIERA Link” to “On” (32). (The default setting is  
“On”.)  
Set the “HDAVI Control” operations on the connected  
equipment (e.g., TV).  
Turn on all “HDAVI Control” compatible equipment and  
select this unit’s input channel on the connected TV so  
that the “HDAVI Control” function works properly.  
Also when the connection or settings are changed,  
repeat this procedure.  
Only TV supports “HDAVI Control 2” or later  
By using the TV remote control, you can play discs using the  
“Control Panel” and display the Top Menu or Pop-up Menu,  
etc.  
1
2
Press [SUB MENU].  
Control Panel  
Screen Aspect  
Top Menu  
Select an item, then  
press [OK].  
Pop-up Menu  
Automatic input switching  
Power on link  
OK  
SUB  
MENU  
RETURN  
When the following operations are performed, the television  
will automatically switch the input channel and display the  
corresponding action. When the television is off, the  
television will automatically turn on.  
The sub menu may not appear  
while the Top Menu for BD-Video or DVD-Video is  
displayed.  
– When play starts on the unit  
– When an action that uses the display screen is performed  
(e.g., Direct Navigator screen)  
The buttons that you can use for this unit vary depending on the TV. For  
details, refer to the operating instructions of the TV.  
The operation of this unit may be interrupted when you press  
incompatible buttons on the TV remote control.  
[BDT310] : When “HDMI(SUB) Output Mode” (31) is set  
to “Normal” and the power of the device connected to the  
HDMI AV OUT SUB is turned on, the Power on link to the  
device connected to the HDMI AV OUT MAIN will not  
work.  
This unit supports “HDAVI Control 5” function.  
“HDAVI Control 5” is the newest standard (current as of December,  
2010) for Panasonic’s HDAVI Control compatible equipment. This  
standard is compatible with Panasonic’s conventional HDAVI  
equipment.  
VIERA Link “HDAVI Control”, based on the control functions provided by  
HDMI which is an industry standard known as HDMI CEC (Consumer  
Electronics Control), is a unique function that we have developed and  
added. As such, its operation with other manufacturers’ equipment that  
supports HDMI CEC cannot be guaranteed.  
Please refer to individual manuals for other manufacturers’ equipment  
supporting VIERA Link function.  
VQT3B58  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
Playback menu  
Disc  
1
Press [DISPLAY].  
Signal Type  
The recording method of  
original video appears.  
e.g., BD-Video  
Video  
Primary  
Video  
Disc  
Signal Type  
Select the type of audio or  
language.  
Play  
Soundtrack  
Video  
Off  
Main  
1ENG  
Subtitle  
Video  
Audio  
-
-
Subtitle Style  
Angle  
Settings  
Select on/off of images. The  
recording method of original  
video appears.  
Menus  
Items  
Secondary  
Video  
2
Press [3, 4] to select the menu and  
Select on/off of audio and  
the language.  
Soundtrack  
press [1].  
3
4
Press [3, 4, 2, 1] to select the item and  
Video  
press [1].  
The recording method of original video appears.  
Press [3, 4] to select the setting.  
Soundtrack  
Show or change the soundtrack.  
Some items can be changed by pressing [OK].  
To exit the screen  
Press [DISPLAY].  
Subtitle  
Turn the subtitle on/off, and change the language depending  
on the media.  
Depending on the condition of the unit (playing,  
stopped, etc.) and media contents, there may be some  
items that you cannot select or change.  
Regarding Language : (38)  
Subtitle Style  
Select the subtitle style.  
Audio channel  
Select the audio channel number.  
(17, “Changing audio”)  
Angle  
Select the number of the angle.  
Some items may be changed only on the disc specific menu. (17)  
VQT3B58  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Progressive  
Select the method of conversion for progressive output to  
suit the type of material being played.  
Play  
Repeat Play  
(Only when the elapsed time is being displayed on the unit’s  
When the content is distorted change the settings from  
“Auto” to “Video”.  
display.)  
Select the item which you want to repeat. The items  
displayed differ depending on the type of media.  
24p  
Movies and other material recorded on DVD-Video at 24p  
are output at 24p.  
Select “Off” to cancel.  
Only when you have selected “On” in “24p Output” (31).  
Random  
Select whether or not to play random.  
Playback Information Window  
Audio  
[BDT310] [BDT215] [BDT210]  
Displays the following.  
Sound Effects*1, *2  
Select the sound effect.  
Digital Tube Sound [BDT310] [BDT215] [BDT210] :  
This feature gives you warm sound, like that produced by  
a vacuum tube amplifier.  
Audio/video attribute information of disc.  
Settings status of “Digital Audio Output” (30).  
HDMI output information.  
*&/+  
Re-master :  
([BDT310] : First: HDMI(MAIN), Second: HDMI(SUB))  
This feature gives you brighter sound by increasing the  
high frequency portion of the audio. (Discs recorded at  
48 kHz or less)  
Press [RETURN] to exit.  
Recommended setting  
Pop-Out Level  
Re-master 1  
Re-master 2  
Pop and rock  
Jazz  
(Only when “Full HD” is selected in “3D Type” (31).)  
Pop-up position for the Playback menu or message screen  
etc. can be adjusted during 3D playback.  
Re-master 3  
Classical  
Night Surround :  
Enjoy a movie with powerful sound even when the volume  
is kept low at night. The audio is set in such a way that it  
can be heard easily.  
Video  
Dialog Enhancer*2  
Picture  
Select the picture quality mode during play.  
If you select “User”, you can make further adjustments.  
Press [1] to select “Picture Adjustment” and press [OK].  
3D NR:  
Reduces the rough noise in the background to give a  
greater feeling of depth.  
When “24p Output” is set to “On”, this function may not  
operate. (31)  
Integrated NR:  
The volume of the center channel is raised to make dialog  
easier to hear.  
High Clarity Sound [BDT310] [BDT215] [BDT210]  
When connected to TV via the HDMI terminal for outputting  
image, it produces clearer sound.  
Only when you have selected “Enable” in “High Clarity  
Sound” (30).  
*1  
Smoothes block noise and reduces the smudging that  
appears around contrasting sections of the picture.  
Not every function can be set individually.  
This function is effective for audio from the HDMI terminal or the  
*2  
OPTICAL terminal only when “Digital Audio Output” is set to “PCM”  
(30). (However, in this case, audio is output as 2ch from the  
OPTICAL terminal.)  
Advanced Settings  
Chroma Process  
The high-resolution processing of HDMI chroma signals  
produces a high-resolution picture with rich picture quality.  
Detail Clarity  
The picture is sharp and detailed.  
Super Resolution  
Pictures of normal image quality are corrected to sharp  
and detailed images when output as 1080i/1080p from  
HDMI AV OUT.  
VQT3B58  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup menu  
Disc  
Change the unit’s settings if necessary. The settings remain  
intact even if you switch the unit to standby.  
DVD-Video Ratings  
Set a ratings level to limit DVD-Video play.  
Follow the on-screen instructions. Enter a 4-digit  
password with the number buttons when the password  
screen is shown.  
1
2
3
Press [HOME].  
Press [OK] to select “Setup”.  
Press [4] to select “Player Settings”.  
BD-Video Ratings  
Set an age limit of BD-Video play.  
Follow the on-screen instructions. Enter a 4-digit  
password with the number buttons when the password  
screen is shown.  
Player Settings  
Disc  
Video  
3D BD-Video Playback  
Select the playback method of 3D compatible video  
software.  
Audio  
Display  
TV / Device Connection  
Network  
Audio Language  
Choose the language for audio.  
Others  
OK  
If “Original” is selected, the original language of each disc  
will be selected.  
RETURN  
Enter a code (38) with the number buttons when you  
select “Other ¢¢¢¢”.  
4
5
Press [3, 4] to select the menu and  
press [OK].  
Subtitle Language  
Choose the language for the subtitle.  
Press [3, 4] to select the item and press  
[OK].  
If “Automatic” is selected and the language selected for  
“Audio Language” is not available, subtitles of that  
language will automatically appear if available on that  
disc.  
Enter a code (38) with the number buttons when you  
select “Other ¢¢¢¢”.  
If there are any other items, repeat these steps.  
6
Press [3, 4, 2, 1] to select the option  
and press [OK].  
Menu Language  
There may be differences in operation methods. If this happens, follow  
the on-screen instructions for the operation.  
Choose the language for the disc menus.  
Enter a code (38) with the number buttons when you  
select “Other ¢¢¢¢”.  
About the password  
The following items use the same password.  
Don’t forget your password.  
“DVD-Video Ratings”  
“BD-Video Ratings”  
“Lock” (32)  
BD-Live Internet Access (19)  
You can restrict Internet access when BD-Live functions are  
used.  
If “Allow (Limited)” is selected, Internet access is permitted  
only for BD-Live contents which have content owner  
certificates.  
Subtitle Text  
Select a suitable item according to the language used for  
DivX [BDT310/210_for_Canada] or MKV subtitles text (18).  
This item is displayed only after playing back a file.  
VQT3B58  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Downmix  
Video  
Select the downmix system of multi-channel to 2-channel  
sound.  
Still Mode (paused video)  
Select the type of picture shown when you pause playback.  
Select “Surround encoded”, when the connected  
equipment supports the virtual surround function.  
There is no effect on “Bitstream” via HDMI AV OUT and  
DIGITAL AUDIO OUT.  
The audio will be output in “Stereo” in the following cases:  
– AVCHD playback  
Auto  
Field  
Automatically selects the type of picture shown.  
Select if jittering occurs when “Auto” is selected.  
Select if small text or fine patterns cannot be  
seen clearly when “Auto” is selected.  
– Playback of secondary audio (including the button click  
sound).  
Frame  
7.1ch Audio Reformatting  
[BDT310] [BDT215] [BDT210]  
Seamless Play  
The chapter segments in playlists are played seamlessly.  
Select “On”, when the picture freezes for a moment at the  
chapters segment in playlists.  
Surround sound with 6.1ch or less is automatically  
expanded and played back at 7.1ch.  
If “Off” is selected, sound is played over the original  
number of channels. (Note that in the case of 6.1ch audio,  
playback will be at 5.1ch.)  
Audio reformatting is enabled in the following cases:  
– When you have selected “PCM” in “Digital Audio  
Output”.  
Black Level Control  
Select lighter or darker for adjusting the black level control to  
the desired setting for picture enhancement.  
– When the audio is Dolby Digital, Dolby Digital Plus,  
Dolby TrueHD or LPCM.  
– BD-Video playback  
Audio  
High Clarity Sound [BDT310] [BDT215] [BDT210]  
When connected to TV via the HDMI terminal for outputting  
image, it produces clearer sound.  
Set to “Enable” and then set “High Clarity Sound” on the  
Playback menu to “On”. (28)  
Dynamic Range Compression  
You can listen at low volumes but still hear dialog clearly.  
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)  
“Auto” is effective only when playing Dolby TrueHD.  
Digital Audio Output  
Press [OK] to show the following settings:  
Audio Delay  
Synchronization between picture and sound is corrected by  
adjusting the delay time of the audio output.  
Dolby D/Dolby D +/Dolby TrueHD  
DTS/DTS-HD  
Select the audio signal to output.  
Select “PCM”, when the connected equipment cannot  
decode the respective audio format. This unit decodes  
the audio format and transmits to the connected  
equipment.  
Not making the proper settings may result in noise.  
BD-Video Secondary Audio  
Select whether to mix or not mix the primary audio and  
secondary audio (including the button click sound). (19)  
If “Off” is selected, the unit outputs the primary audio  
only.  
PCM Down Conversion  
Select how to output audio with a sampling frequency of  
96 kHz for the PCM output from the DIGITAL AUDIO OUT.  
If “On” is selected, the signals that are converted to  
48 kHz are output.  
If “Off” is selected, and the connected equipment does not  
support 96 kHz, the sound will not be output normally.  
Signals are converted to 48 kHz despite the settings in the  
following cases:  
– when the signals have a sampling frequency of 192 kHz  
– when the disc has copy protection  
– when “BD-Video Secondary Audio” is set to “On”  
VQT3B58  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Aspect  
Set to match the type of television connected.  
Display  
When connected to a 4:3 aspect television and playing 16:9  
ratio image:  
Status Messages  
Choose whether to show status messages automatically.  
The sides are cut off so  
the picture fills the screen.  
When playing BD-Video,  
video is output as “4:3  
Letterbox”.  
On-screen Language  
Choose the language for menus and on-screen messages.  
4:3 Pan &  
Scan  
Screen Saver Function  
This is to prevent burn-in on the screen.  
When this is set to “On”:  
Black bands appear at the  
top and bottom of the  
picture.  
4:3  
Letterbox  
If there is no operation for 10 minutes or more, Direct  
Navigator screen switches to HOME menu automatically.  
While playing and pausing, etc., this function is not  
available.  
As for Music [CD-DA] or MP3, regardless of the setting, if  
there is no operation for a while, Direct Navigator screen  
switches to the other states automatically.  
When connected to a 16:9 widescreen television and  
playing 4:3 ratio image:  
Video is displayed as a 4:3 ratio image in the  
center of the screen.  
16:9  
Front Panel Display  
Video is displayed as a horizontally  
16:9 Full  
stretched 16:9 image.  
Changes the brightness of the unit’s display.  
If “Auto” is selected the display is dimmed during playback  
and bright not during playback.  
HDMI Connection  
Press [OK] to show the following settings:  
HDMI(SUB) V.OFF LED Control [BDT310]  
Set to light the HDMI (SUB) V.OFF LED or not.  
This will light when “HDMI(SUB) Output Mode” is set to  
V.OFF”, and the power of the connected equipment to the  
HDMI AV OUT SUB is on.  
HDMI(SUB) Output Mode [BDT310]  
Set to output the video from the HDMI AV OUT SUB  
terminal or not.  
HDMI Resolution  
License  
The items supported by the connected devices are  
indicated on the screen as “¢”. When any item without “¢”  
Information about the software used by this unit is displayed.  
is selected, the images may be distorted.  
If “Auto” is selected, automatically selects the output  
resolution best suited to the connected television.  
To enjoy high-definition video up-converted to 1080p,  
you need to connect the unit directly to 1080p  
compatible HDTV (High Definition Television). If this unit  
is connected to an HDTV through other equipment, it  
must also be 1080p compatible.  
TV / Device Connection  
3D Settings  
Press [OK] to show the following settings:  
3D Type  
24p Output  
Select the format of the connected TV.  
Change the settings for 3D on the TV also when  
“Checker board” or “Side by side” is selected.  
When this unit is connected to a TV supporting 1080/24p  
output using an HDMI cable, movies and other material  
recorded at 24p are output at 24p.  
When playing DVD-Video, set to “On” and then set “24p”  
in “Video” (28) to “On”.  
When BD-Video images other than 24p are played,  
images are output at 60p.  
3D Playback Precautions  
Set to display or hide the 3D viewing warning screen when  
playing back the 3D compatible video software.  
24p :  
A progressive image recorded at a rate of 24 frames per  
second (motion-picture film). Many BD-Video movie  
contents are recorded in 24 frames/second in  
accordance with the film materials.  
HDMI Color Mode  
This setting is for selecting color-space conversion of the  
image signal when the unit is connected using an HDMI  
cable.  
VQT3B58  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI Audio Output  
Proxy Server Settings  
This is for checking the state of connection with the Proxy  
server and performing settings.  
This setting selects whether or not to output audio from  
HDMI.  
Select “Off” when the TV is connected to this unit via an  
HDMI terminal, and this unit is also connected to other  
devices, such as an amplifier/receiver via an OPTICAL  
terminal.  
Press [OK] to show the respective setting.  
Internet Content Settings (23)  
(VIERA CAST)  
Press [OK] to show the following settings:  
VIERA Link  
Set to use “HDAVI Control” function when connected with  
an HDMI cable to a device that supports “HDAVI Control”.  
Lock  
You can restrict the usage of VIERA CAST.  
Follow the on-screen instructions. Enter a 4-digit  
password with the number buttons when the password  
screen is shown.  
Select “Off” when you do not want to use “HDAVI  
Control”.  
Deep Color Output  
Audio Auto Gain Control  
This setting is for selecting whether to use Deep Color  
Volume that is different depending on the contents is  
adjusted automatically to the standard volume while  
using the VIERA CAST.  
output when a television that supports Deep Color is  
connected.  
Depending on contents, this function effect will not  
work.  
Select “Off” when the audio is warped.  
Contents Type Flag  
Depending on the playback content, the TV will output  
adjusting to the optimal method when a TV that supports  
this function is connected.  
Time Zone  
By selecting the time zone, it is possible to set the unit’s  
time to match your location.  
Some VIERA CAST contents require the time zone to  
be set. Set the time zone if necessary.  
Network  
DST  
Network Easy Setting (13)  
Select “On” when using Daylight Saving time.  
Network Settings  
Perform network-related settings individually.  
Network Drive Connection  
It is possible to access the shared folder of equipment not  
compatible with DLNA, such as the Windows XP operating  
system, and play back video, still pictures, and music on  
this unit.  
For the setting and operation method of connected  
equipment, refer to the following Website.  
(This site is in English only.)  
Press [OK] to show the following settings:  
LAN Connection Mode  
Select connection method.  
Wireless Settings  
This allows the Wireless router and connection settings to  
be set and the current connection settings and connection  
state to be checked when a wireless connection is used.  
Connection Setting  
The Wireless router connection wizard will be displayed.  
Double Speed Mode Setting (2.4GHz)  
When a 2.4 GHz wireless format is used, this setting  
sets the connection speed.  
If you connect using the “Double Speed Mode  
(40MHz)”, 2 channels use the same frequency band,  
and there is consequently a greater risk of reception  
interference. This can cause the connection speed to  
drop or the connection to become unstable.  
IP Address/DNS Settings  
This is for checking the state of the network connection  
and setting the IP address and DNS-related.  
Press [OK] to show the respective setting.  
“Connection Speed Setting” is enabled only when “Auto  
Detect Connection Speed” is turned “Off”.  
VQT3B58  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Device Settings (25)  
Press [OK] to show the following settings:  
Touch Free Sensor [BDT310] [BDT215] [BDT210]  
Press [OK] to show the following settings:  
Remote Device Operation  
Enable to operate by DMC.  
If “On” is selected, “Quick Start” is fixed to “On”.  
Sensor (5)  
Tray is opened and closed by waving your hands above  
the top part of this unit.  
Setting Unit Name  
Set the name of this unit to be displayed on the  
connected equipment.  
Sound Level  
Adjust the volume of the sensor.  
DivX Registration (18) [BDT310/210_for_Canada]  
You need this registration code to purchase and play DivX  
Video-on-Demand (VOD) content.  
Registration Type  
Allow connection to all the equipment that  
Automatic  
is accessing this unit.  
System Information  
Display firmware version of this unit and wireless LAN  
module.  
Set the permission of the connection  
individually for the equipment that is  
accessing this unit.  
Manual  
Firmware Update (15)  
Remote Device List  
Press [OK] to show the following settings:  
Registering/deregistering of the displayed equipment  
can be performed when “Manual” in “Registration Type”  
is selected.  
Automatic Update Check  
When this equipment remains connected to the Internet, it  
will check for the latest firmware version when it is turned  
MAC Address  
Displays the MAC address of this unit.  
on and you can update it if necessary.  
Update Now  
You can update the firmware manually if a firmware  
update is available.  
Others  
Remote Control Code  
Change the remote control code if other Panasonic products  
react to this remote control.  
Quick Start  
Speed of startup from power off is increased.  
Internal control unit will be powered when it is set to “On”  
so compared to when the setting is “Off” the following will  
occur.  
– Idle power consumption will increase. (about the power  
consumption 39)  
Easy Setting  
You can execute basic settings. (“On-screen Language”,  
“TV Aspect”, “Quick Start”, “Touch Free Sensor” [BDT310]  
[BDT215] [BDT210])  
Restore Default Settings  
This returns all values in the Setup menu and the Playback  
menu, except for “Remote Control Code”, “On-screen  
Language”, “LAN Connection Mode”, “Wireless Settings”,  
“IP Address/DNS Settings”, “Proxy Server Settings”, “Lock”,  
“DVD-Video Ratings” and “BD-Video Ratings” etc. to the  
default settings.  
VQT3B58  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Troubleshooting guide  
General operation  
Before requesting service, please perform  
the following steps.  
To return to the factory preset.  
¾
Select “Yes” in “Restore Default Settings” in the Setup  
menu. (33)  
Do you have the latest firmware installed?  
Firmware updates may be released to correct operating  
irregularities that are discovered with certain movies.  
To return all settings to the factory preset.  
(15)  
¾
1
Reset the unit as follows:  
4
While the unit is off, press and hold [OK], [B] and [Y] on  
the remote control at the same time for more than  
5 seconds.  
– “00 RET” is displayed on the unit’s display.  
Repeatedly press [1] (right) on the remote control or  
[POWER Í/I] on the unit until “08 FIN” is displayed on  
the unit’s display.  
Make the following checks and visit our  
website for more information.  
For USA :  
Enter the model number.  
For Canada :  
4
2
3
Press and hold [OK] on the remote control or [< OPEN/  
CLOSE] on the unit for at least 3 seconds.  
Or visit our website to find a service  
center.  
This unit is turned off when the input for the  
TV is switched.  
You can find a service center near you easily on our  
website.  
¾
This is a normal phenomenon when using VIERA Link  
(HDAVI Control 4 or later). For details please read the  
operating instructions for the TV.  
Other support information:  
“Customer Services Directory (United States and Puerto  
Rico)” (41) or “Limited Warranty (Only for  
CANADA)” (42).  
The remote control doesn’t work properly.  
¾
¾
Change the batteries in the remote control. (4)  
The remote control and main unit are using different  
codes. If “SET ” is displayed on the unit’s display when  
a button is pressed on the remote control, change the  
code on the remote control. (33)  
The following do not indicate a problem with this unit:  
– Regular disc rotating sounds.  
– Image disturbance during search.  
– Image disturbance when replacing 3D discs.  
The TV tuner mode is not displayed when  
the TV is switched on.  
Unit doesn’t respond to remote  
¾
This phenomenon may occur, depending on the TV  
setting, when “Quick Start” is set to “On”.  
control or front panel buttons.  
Press and hold [POWER Í/I] on the main unit for  
3 seconds.  
– Depending on the TV, this phenomenon may be prevented  
by reconnecting the HDMI cable to a different HDMI input  
terminal or by changing the HDMI auto connection setting.  
– If still unable to power the unit off, disconnect the power  
cord, wait 1 minute, then reconnect the power cord.  
You have forgotten your ratings password.  
You want to cancel the ratings level.  
¾
1
The ratings level returns to the factory preset.  
While the unit is on, press and hold [OK], [B] and [Y] on  
the remote control at the same time for more than  
5 seconds.  
– “00 RET” is displayed on the unit’s display.  
Repeatedly press [1] (right) on the remote control or  
[POWER Í/I] on the unit until “03 VL” is displayed on  
the unit’s display.  
Cannot eject disc.  
The unit may have a problem.  
1
While the unit is off, press and hold [OK], [B] and [Y] on  
the remote control at the same time for more than  
5 seconds.  
2
3
– “00 RET” is displayed on the unit’s display.  
Repeatedly press [1] (right) on the remote control or  
[POWER Í/I] on the unit until “06 FTO” is displayed on  
the unit’s display.  
Press [OK] on the remote control or [< OPEN/CLOSE]  
on the unit.  
2
3
Press [OK] on the remote control or [< OPEN/CLOSE]  
on the unit.  
VQT3B58  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This unit does not recognize the USB  
connection correctly.  
3D video is not output.  
¾
Is there a non-3D compatible amplifier/receiver  
connected between this unit and a TV? (9)  
[BDT310] : If there is a non-3D compatible amplifier/  
receiver connected to the HDMI AV OUT SUB terminal,  
set the “HDMI(SUB) Output Mode” to “V.OFF”. (9)  
Are the settings on this unit and the TV correct? (20)  
Is the amplifier/receiver that is connected between this  
unit and TV on?  
¾
If USB device is connected to this unit while playing a  
disc or in a video communication the connection will not  
be recognized. Press [HOME] and reconnect USB  
device.  
¾
¾
¾
[BDT310] [BDT215] [BDT210] : USB memory and USB HDD  
are not recognized via the rear USB port of this unit.  
Disconnect and reconnect the USB cable. If it still does  
not recognize the connection, turn the power of this unit  
off and on again.  
¾
¾
3D video is not output correctly as 2D.  
¾
USB devices connected using a USB extension cable  
other than the supplied with the Wireless LAN Adaptor  
DY-WL10 (optional) [BDT110] or a USB hub may not be  
recognized by this unit.  
¾
Select “Set before play” in the Setup menu, and select  
“2D Playback” in the setup screen displayed when  
playing 3D discs. (29)  
¾
Discs that have recorded titles with Side by side  
(2 screen structure) and that can be enjoyed in 3D are  
played back in accordance with the settings of the TV.  
¾
¾
If you connect USB HDD to this unit, use USB extension  
cable that is supplied with the HDD.  
If two USB memory and USB HDD are connected  
simultaneously, they will not be recognized by this unit.  
No subtitles.  
¾
When progressive output is on, closed captions/subtitles  
cannot be displayed.  
The subtitles overlap closed captions  
recorded on discs.  
Picture  
¾
Turn off the subtitles or turn off the closed caption  
The images from this unit do not appear on  
the television.  
Picture is distorted.  
setting on the TV. (27)  
A black band is displayed around the edge  
of the screen.  
The aspect ratio of the screen is abnormal.  
¾
An incorrect resolution is selected in “HDMI Resolution”.  
Reset the setting as follows:  
While the unit is on, press and hold [OK], [B] and [Y] on  
the remote control at the same time for more than  
5 seconds.  
1
¾
¾
Confirm the “TV Aspect” is set properly. (31)  
Adjust the aspect setting on the television.  
– “00 RET” is displayed on the unit’s display.  
Repeatedly press [1] (right) on the remote control or  
[POWER Í/I] on the unit until “04 PRG” is displayed on  
the unit’s display.  
Press and hold [OK] on the remote control or [< OPEN/  
CLOSE] on the unit for at least 3 seconds.  
Set the item again. (31)  
2
3
Audio  
Cannot switch audio.  
¾
When connecting an amplifier/receiver using an  
OPTICAL terminal or an HDMI terminal, you cannot  
switch the audio if “Digital Audio Output” is set to  
“Bitstream”. Set “Digital Audio Output” to “PCM”. (30)  
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD  
audio are not output in bitstream, select “Yes” in “Restore  
Default Settings” and make proper settings. (33)  
¾
When “3D BD-Video Playback” in the Setup menu is set  
to “Automatic”, images may not be output depending on  
the connection method. After removing the disc from this  
unit, select “Set before play” in the Setup menu, and  
select “2D Playback” in the setup screen displayed  
when playing 3D discs. (29)  
Cannot hear the desired audio type.  
¾
Check the connections and the “Digital Audio Output”  
settings. (9, 30)  
¾
To output audio from a device connected with an HDMI  
cable, set “HDMI Audio Output” to “On” in the Setup  
menu. (32)  
[BDT310] : When connecting this unit to a TV via an  
HDMI AV OUT MAIN and to an amplifier/receiver via an  
HDMI AV OUT SUB, set “HDMI(SUB) Output Mode” to  
V.OFF”. (9)  
Video is not output.  
¾
¾
[BDT310] [BDT215] [BDT210] : Set “High Clarity Sound” in  
the Playback menu to “Off” to use the VIDEO OUT  
terminal. (28)  
[BDT310] : Video from the HDMI AV OUT SUB terminal is  
not output when the “HDMI(SUB) Output Mode” is set to  
“V.OFF”. (31)  
¾
There is no sound coming out from the TV.  
[BDT310]  
¾
Audio may not output from the TV when the amplifier/  
receiver is connected to the HDMI AV OUT SUB, and  
“HDMI(SUB) Output Mode” (31) is set to “V.OFF”. In  
such a case, output audio from the amplifier/receiver. To  
output audio from the TV, set the “HDMI(SUB) Output  
Mode” to “Normal”.  
Video is not output in high-definition.  
¾
Confirm that “HDMI Resolution” in the Setup menu is set  
properly. (31)  
VQT3B58  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
Network  
Disc cannot be played.  
I can’t connect to the network.  
¾
The disc is dirty. (4)  
¾
Confirm the network connection and settings.  
(10, 13, 32)  
¾
Check the operating instructions for each device and  
connect accordingly.  
Still pictures (JPEG) do not play back  
normally.  
¾
The images that were edited on the PC, such as  
Progressive JPEG, etc., may not play back.  
When using Wireless LAN connection, video  
from the DLNA Certified media server is not  
played back or video frames are dropped  
during playback.  
I can’t play back BD-Live.  
¾
¾
The SD card is write-protected. (7)  
Confirm that this unit is connected to the broadband  
Internet. (10)  
Confirm the “BD-Live Internet Access” settings. (29)  
Confirm an SD Card is inserted into the SD Card slot.  
(16)  
¾
Higher transfer rate router such as 802.11n (2.4 GHz or  
5 GHz) Wireless router may solve the problem. If you  
use 802.11n (2.4 GHz or 5 GHz) Wireless router, it is  
necessary to set the encryption type to “AES”.  
Simultaneous use with a microwave, cordless telephone  
etc. at 2.4 GHz may result in connection interruptions or  
other problems.  
¾
¾
¾
On the “Wireless Settings” screen (32), the  
continuous lighting of at least 4 “Reception” indicators is  
the target for a stable connection. If 3 or fewer indicators  
are lit or the connection is being interrupted, change the  
position or angle of your Wireless router and see if the  
connection state improves. If there is no improvement,  
connect to a wired network and perform the “Network  
Easy Setting” (13) again.  
VQT3B58  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
No READ  
Messages  
¾
The media is dirty or badly scratched. The unit cannot  
play.  
The following messages or service numbers appear on the  
television or unit’s display when something unusual is  
detected during startup and use.  
PLEASE WAIT  
¾
The unit is carrying out an internal process. This is not a  
malfunction. You cannot operate the unit while “PLEASE  
WAIT” is displayed.  
On the television  
REMOVE  
¾
The USB device is drawing too much power. Remove  
the USB device.  
Cannot play.  
¾
You inserted an incompatible disc (Discs recorded in  
PAL video, etc.).  
SET   
(“ ” stands for a number.)  
Cannot display on this unit.  
¾
¾
You tried to play a non-compatible image.  
Confirm “SD” on the unit’s display is not displayed and  
re-insert the card.  
¾
The remote control and main unit are using different  
codes. Change the code on the remote control.  
Press and hold [OK] and the  
indicated number button at the  
same time for more than  
5 seconds.  
No disc is inserted.  
¾
The disc may be upside down.  
$ This operation is not available.  
U59  
¾
Some operations are unsupported by the unit. For  
example;  
¾
The unit is hot.  
The unit switches to standby for safety reasons. Wait for  
about 30 minutes until the message disappears.  
Select a position with good ventilation when installing  
the unit. Do not block the ventilation hole on the side of  
the unit.  
– BD-Video: During playback, reverse slow-motion or  
reverse frame-by-frame is not possible.  
IP address is not set.  
¾
The “IP Address” in “IP Address/DNS Settings” is “---.  
---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and  
“Default Gateway”. (Select the automatic address  
acquisition if necessary.)  
H or F  
(“ ” stands for a number.)  
¾
¾
There is something unusual.  
Check the unit using the troubleshooting guide. If the  
service number does not disappear, do the following.  
Disconnect the plug from the AC outlet, wait a few  
seconds, then reconnect it.  
The current settings only offer minimal  
wireless access point security and low  
performance. It is recommended to change it  
for better security.  
1
2
Press [POWER Í/I] to turn the power on.  
¾
Authentication type for the Wireless LAN is set to “Open  
system”, or the encryption type is set to “No encryption”.  
It is recommended to encrypt for safety reasons. For  
details, refer to the instructions of the Wireless router  
being used. Encryption is required when playing back  
video, etc., from DLNA compatible devices.  
If the service number does not disappear despite doing the  
above, request service from the dealer. Inform the dealer of  
the service number when requesting service.  
START  
¾
The system is being restarted during the firmware  
update. Please do not turn off the unit.  
UPD/  
(“ ” stands for a number.)  
On the unit’s display  
¾
The firmware is being updated.  
Please do not turn off the unit.  
F99  
¾
The unit fails to operate properly. Press [POWER Í/I]  
FINISH  
on the main unit for 3 seconds to switch the unit to  
standby, then switch back on.  
¾
The firmware update is complete.  
HDMI ONLY  
¾
Some BD-Video discs can only be output with HDMI.  
NET  
¾
While connecting to a network.  
No PLAY  
¾
There is a viewing restriction on a BD-Video or  
DVD-Video. (29)  
VQT3B58  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplemental information  
Display languages list  
Display Language Display Language Display Language  
ENG  
FRA  
DEU  
ITA  
ESP  
NLD  
SVE  
NOR  
DAN  
POR  
RUS  
English  
French  
German  
Italian  
Spanish  
Dutch  
Swedish  
Norwegian  
Danish  
JPN  
CHI  
KOR  
MAL  
VIE  
THA  
POL  
CES  
SLK  
HUN  
FIN  
Japanese  
Chinese  
Korean  
Malay  
ARA  
HIN  
PER  
IND  
Arabic  
Hindi  
Persian  
Indonesian  
Maori  
Bulgarian  
Romanian  
Greek  
Vietnamese MRI  
Thai  
Polish  
Czech  
Slovak  
Hungarian  
Finnish  
BUL  
RUM  
GRE  
TUR  
Turkish  
Others  
Portuguese  
Russian  
Language code list  
Language Code Language Code Language Code  
Abkhazian:  
Afar:  
Afrikaans:  
Albanian:  
6566 Gujarati:  
6565 Hausa:  
6570 Hebrew:  
8381 Hindi:  
6577 Hungarian:  
6582 Icelandic:  
7289 Indonesian:  
6583 Interlingua:  
6589 Irish:  
7185 Rhaeto-Romance:  
7265  
8277  
7387 Romanian:  
7273 Russian:  
7285 Samoan:  
7383 Sanskrit:  
8279  
8285  
8377  
8365  
Amharic  
Arabic:  
:
Armenian:  
Assamese:  
Aymara:  
7378 Scots Gaelic: 7168  
7365 Serbian:  
8382  
7165 Serbo-Croatian: 8372  
Azerbaijani:  
Bashkir:  
Basque:  
6590 Italian:  
7384 Shona:  
7465 Sindhi:  
7487 Singhalese:  
7578 Slovak:  
7583 Slovenian:  
7575 Somali:  
7589 Spanish:  
7579 Sundanese:  
7585 Swahili:  
7679 Swedish:  
7665 Tagalog:  
8378  
8368  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
6665 Japanese:  
6985 Javanese:  
Kannada:  
6678 Kashmiri:  
6890 Kazakh:  
6672 Kirghiz:  
6682 Korean:  
6671 Kurdish:  
7789 Laotian:  
Bengali; Bangla:  
Bhutani:  
Bihari:  
Breton:  
Bulgarian:  
Burmese:  
Byelorussian: 6669 Latin:  
Cambodian:  
Catalan:  
Chinese:  
Corsican:  
Croatian:  
Czech:  
7577 Latvian, Lettish: 7686 Tajik:  
6765 Lingala:  
9072 Lithuanian:  
6779 Macedonian:  
7282 Malagasy:  
6783 Malay:  
6865 Malayalam:  
7876 Maltese:  
6978 Maori:  
6979 Marathi:  
6984 Moldavian:  
7079 Mongolian:  
7074 Nauru:  
7678 Tamil:  
7684 Tatar:  
7775 Telugu:  
7771 Thai:  
7783 Tibetan:  
7776 Tigrinya:  
7784 Tonga:  
7773 Turkish:  
7782 Turkmen:  
7779 Twi:  
7778 Ukrainian:  
7865 Urdu:  
7869 Uzbek:  
7879 Vietnamese:  
7982 Volapük:  
Danish:  
Dutch:  
English:  
Esperanto:  
Estonian:  
Faroese:  
Fiji:  
Finnish:  
French:  
Frisian:  
Galician:  
Georgian:  
German:  
Greek:  
Greenlandic:  
Guarani:  
7073 Nepali:  
7082 Norwegian:  
7089 Oriya:  
7176 Pashto, Pushto: 8083 Welsh:  
7565 Persian:  
6869 Polish:  
6976 Portuguese:  
7576 Punjabi:  
7178 Quechua:  
7065 Wolof:  
8076 Xhosa:  
8084 Yiddish:  
8065 Yoruba:  
8185 Zulu:  
VQT3B58  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
File format  
Signal system:  
NTSC  
Operating temperature range:  
File format  
Extension  
Reference  
i5 oC to i35 oC (i41 oF to i95 oF)  
ID3 tags (Only titles and  
the names of artists)  
Operating humidity range:  
MP3  
“.MP3”, “.mp3”  
10 % to 80 % RH (no condensation)  
Video output:  
Audio output:  
1.0 Vp-p (75 )/Pin jack:1 system  
MOTION JPEG and  
Progressive JPEG is  
not supported  
2 Vrms (1 kHz, 0 dB)/Pin jack  
Number of connectors :  
2 channel:1 system  
Digital audio output:  
You may not be able to  
play back the file if you  
have edited the folder  
structure or the file  
name on a PC or other  
device.  
Optical digital output (Optical terminal)  
Type A (19 pin) [BDT310] : 2 system  
[BDT215] [BDT210] [BDT110] : 1 system  
HDMI AV output:  
JPEG  
“.JPG”, “.jpg”  
This unit supports “HDAVI Control 5” function.  
SD card slot:  
USB slot:  
Ethernet:  
Connector : 1 system  
USB2.0 : 2 system  
10BASE-T/100BASE-TX : 1 system  
WLAN [BDT310] [BDT215] [BDT210]  
“.DIVX”, “.divx”, The video file and  
Standard Compliance:  
“.AVI”, “.avi”  
subtitles text file are  
inside the same folder,  
and the file names are  
the same except for  
the file extensions.  
Some DivX and MKV  
file may not be played  
back, depending on the  
video resolution and  
frame rate condition.  
IEEE802.11n / IEEE802.11a / IEEE802.11g /  
IEEE802.11b  
Subtitles text  
file  
“.SRT”, “.srt”,  
“.SUB”, “.sub”,  
“.TXT”, “.txt”  
DivX  
[BDT310/210_for_Canada]  
Transmission system: OFDM system, DSSS system  
Access Mode:  
Security:  
Infrastructure mode  
WPA2-PSK (TKIP/AES)  
WPA-PSK (TKIP/AES)  
WEP (64 bit / 128 bit)  
(
This unit supports WPA and WPA2 encryption.)  
LASER Specification  
Class I LASER Product:  
“.MKV”, “.mkv”  
Subtitles text  
file  
“.SRT”, “.srt”,  
“.SSA”, “.ssa”,  
“.ASS”, “.ass”  
Wave length: 790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)  
Laser power:No hazardous radiation is emitted with the  
safety protection  
MKV  
[For_U.S.A._and_Canada]  
Power supply:  
AC 120 V, 60 Hz  
[BDT310] Approx. 13 W  
Power consumption:  
With certain recording states and folder structures, the  
play order may differ or playback may not be possible.  
[BDT215] [BDT210] [BDT110] Approx. 9.9 W  
Power consumption in standby mode: Approx. 0.1 W  
Power consumption in quick start standby mode:  
[BDT310] Approx. 4.1 W  
[BDT215] [BDT210] [BDT110] Approx. 3.2 W  
[For_units_with_PX_printed_on_the_outer_packaging]  
Audio information  
The audio output differs depending on which terminals are  
connected to the amplifier/receiver, and the settings on the  
unit. (30, Digital Audio Output)  
The number of channels listed is the maximum possible  
number of output channels when connected to amplifier/  
receiver compatible with the respective audio format.  
Power supply:  
Power consumption:  
AC 110 V to 240 V, 50 Hz/60 Hz  
Approx. 13 W  
Power consumption in standby mode: Approx. 0.2 W  
Power consumption in quick start standby mode:  
Approx. 3.5 W  
Dimensions (WkDkH) Including the projecting parts:  
430 mmk185 mmk35 mm  
(Approx. 16 15/16zk7 5/16zk1 7/16z)  
Mass (Weight):  
Approx. 1.6 kg (3.52 lbs)  
“Digital Audio Output”  
Terminal  
Specifications are subject to change without notice.  
“Bitstream”  
“PCM”  
BD-Video :  
7.1ch PCM*1*2*3  
DVD-Video :  
5.1ch PCM  
Outputs using original  
audio*1  
HDMI AV  
OUT  
Dolby Digital/  
DTS Digital Surround PCM  
Down-mixed 2ch  
OPTICAL  
*1  
*2  
*3  
When “BD-Video Secondary Audio” is set to “On”, the audio will be  
output as Dolby Digital, DTS Digital Surround or 5.1ch PCM.  
[BDT110] : The maximum possible number of Dolby sound is 5.1ch  
PCM.  
The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on  
the DTS, Inc. specifications.  
VQT3B58  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This product incorporates the following software:  
(1) the software developed independently by or for Panasonic  
Corporation,  
(2) the software owned by third party and licensed to Panasonic  
Corporation,  
(3) the software licensed under the GNU General Public License,  
Version 2 (GPL v2),  
(4) the software licensed under the GNU LESSER General Public  
License, Version 2.1 (LGPL v2.1) and/or,  
(5) open sourced software other than the software licensed under the  
GPL v2 and/or LGPL v2.1  
For the software categorized as (3) and (4), please refer to the terms  
and conditions of GPL v2 and LGPL v2.1, as the case may be at  
In addition, the software categorized as (3) and (4) are copyrighted by  
several individuals. Please refer to the copyright notice of those  
individuals at  
The GPL/LGPL software is distributed in the hope that it will be useful,  
but WITHOUT ANY WARRANTY, without even the implied warranty of  
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  
At least three (3) years from delivery of products, Panasonic will give to  
any third party who contacts us at the contact information provided  
below, for a charge no more than our cost of physically performing  
source code distribution, a complete machine-readable copy of the  
corresponding source code covered under GPL v2/LGPL v2.1.  
Contact Information  
Source code is also freely available to you and any other member of  
the public via our website below.  
For the software categorized as (5) includes as follows.  
1. This product includes software developed by the OpenSSL Project  
for use in the OpenSSL Toolkit.  
(http://www.openssl.org/)  
2. This product includes software developed by the University of  
California, Berkeley and its contributors.  
3. FreeType code.  
4. The Independent JPEG Group's JPEG software.  
gSOAP Public License 1.3  
Part of the software embedded in this product is gSOAP software.  
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van  
Engelen, Genivia inc. All Rights Reserved.  
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY  
GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE  
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,  
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED  
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;  
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,  
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY  
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGE.  
VQT3B58  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)  
Panasonic Consumer Electronics Company,  
Division of Panasonic Corporation of North America  
One Panasonic Way, Secaucus, New Jersey 07094  
Panasonic Blu-ray and DVD Products Limited Warranty  
Limited Warranty Coverage (For USA and Puerto Rico Only)  
such as hotel, office, restaurant, or other business or rental use of the  
If your product does not work properly because of a defect in materials product, or service by anyone other than a Factory Service Center or  
or workmanship, Panasonic Consumer Electronics Company (referred other Authorized Servicer, or damage that is attributable to acts of  
to as “the warrantor”) will, for the length of the period indicated on the  
chart below, which starts with the date of original purchase (“warranty  
period”), at its option either (a) repair your product with new or  
refurbished parts, (b) replace it with a new or a refurbished equivalent  
value product, or (c) refund your purchase price. The decision to  
repair, replace or refund will be made by the warrantor.  
God.  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED  
UNDER “LIMITED WARRANTY COVERAGE.  
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS  
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS  
WARRANTY.  
Product or Part Name  
Parts  
Labor  
(As examples, this excludes damages for lost time, travel to and from  
the servicer, loss of or damage to media or images, data or other  
memory or recorded content. The items listed are not exclusive, but for  
illustration only.)  
Blu-ray Disc Player, Portable  
Blu-ray Disc Player  
1 year  
90 days  
Blu-ray Home Theater System  
1 year  
1 year  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE  
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE  
PERIOD OF THE LIMITED WARRANTY.  
DVD Player, Portable DVD Player 1 year  
90 days  
90 days  
DVD Recorder  
1 year  
Some states do not allow the exclusion or limitation of incidental or  
consequential damages, or limitations on how long an implied  
warranty lasts, so the exclusions may not apply to you.  
Rechargeable Batteries (pack),  
DVD-RAM Disc (defective exchange)  
10 days  
Not  
Applicable  
This warranty gives you specific legal rights and you may also have  
During the “Labor” warranty period there will be no charge for labor.  
During the “Parts” warranty period, there will be no charge for parts.  
This Limited Warranty excludes both parts and labor for  
non-rechargeable batteries, antennas, and cosmetic parts (cabinet).  
This warranty only applies to products purchased and serviced in the  
United States or Puerto Rico. This warranty is extended only to the  
original purchaser of a new product which was not sold “as is”.  
other rights which vary from state to state. If a problem with this  
product develops during or after the warranty period, you may contact  
your dealer or Service Center. If the problem is not handled to your  
satisfaction, then write to the warrantor’s Consumer Affairs  
Department at the addresses listed for the warrantor.  
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS  
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.  
Mail-In Service  
For assistance in the U.S.A. and Puerto Rico in obtaining repairs,  
please ship the product prepaid to:  
Customer Services Directory (United States and Puerto Rico)  
Obtain Product Information and Operating Assistance; locate  
your nearest Dealer or Service Center; purchase  
Parts and Accessories; or make Customer Service and  
Literature requests by visiting our Web Site at:  
Panasonic Exchange Center  
4900 George McVay Drive  
Suite B  
or, contact us via the web at:  
You may also contact us directly at:  
1-800-211-PANA (7262)  
Monday-Friday 9am-9pm,  
Saturday-Sunday 10am-7pm EST  
McAllen, TX 78503  
When shipping the unit, carefully pack, include all accessories, and  
send it prepaid, adequately insured and preferably in the original  
carton. When shipping Lithium Ion batteries please visit our Web Site  
providing the most up to date information. Include a letter detailing the  
complaint, a return address and provide a daytime phone number  
where you can be reached. A valid registered receipt is required under  
the Limited Warranty.  
For hearing or speech impaired TTY users, TTY:  
1-877-833-8855  
Accessory Purchases (United States and Puerto Rico)  
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE  
PURCHASER WILL BE REQUIRED TO FURNISH A SALES  
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF  
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.  
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT  
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.  
Purchase Parts, Accessories and Instruction Books online for all  
Panasonic Products by visiting our Web Site at:  
Or, send your request by E-mail to:  
You may also contact us directly at:  
Limited Warranty Limits And Exclusions  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)  
This warranty ONLY COVERS failures due to defects in materials or  
workmanship, and DOES NOT COVER normal wear and tear or  
cosmetic damage. The warranty ALSO DOES NOT COVER damages  
which occurred in shipment, or failures which are caused by products  
not supplied by the warrantor, or failures which result from accidents,  
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty  
installation, set-up adjustments, misadjustment of consumer controls,  
improper maintenance, power line surge, lightning damage,  
(Monday-Friday 9am-9pm EST)  
Panasonic Service and Technology Company  
20421 84th Avenue South, Kent, WA 98032  
(We accept Visa, MasterCard, Discover Card, American Express,  
and Personal Checks)  
For hearing or speech impaired TTY users, TTY:  
1-866-605-1277  
modification, introduction of sand, humidity or liquids, commercial use  
As of December 2010  
User memo:  
The model number and serial number of this product can be found  
on either the back or the bottom of the unit.  
Please note them in the space provided below and keep for  
future reference.  
DATE OF PURCHASE  
DEALER NAME  
DEALER ADDRESS  
MODEL NUMBER  
SERIAL NUMBER  
TELEPHONE NUMBER  
VQT3B58  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty (Only for CANADA)  
Panasonic Canada Inc.  
5770 Ambler Drive, Mississauga, Ontario L4W 2T3  
PANASONIC PRODUCT - LIMITED WARRANTY  
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a  
period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or  
refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The  
decision to repair, replace or refund will be made by Panasonic Canada Inc.  
Technics Audio Product - One (1) year, parts and labour  
Panasonic BD/DVD Product - One (1) year, parts and labour  
Panasonic Audio Receivers - One (1) year, parts and labour  
Home Theater Systems Product - One (1) year, parts and labour  
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand  
product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which  
product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.  
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER  
PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIRED  
LIMITATIONS AND EXCLUSIONS  
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and  
tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which  
are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse,  
neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls,  
improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial  
use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an  
Authorized Servicer, or damage that is attributable to acts of God.  
Dry cell batteries are also excluded from coverage under this warranty.  
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING  
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT  
WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES  
RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED  
WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of  
or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for  
illustration only.)  
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the  
exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you  
specific legal rights and you may have other rights which vary depending on your province or territory.  
WARRANTY SERVICE  
For product operation and information assistance, please contact:  
PRODUCT OPERATION ASSISTANCE  
Customer Care Centre:  
Telephone #: 1-800-561-5505  
Fax #: (905) 238-2360  
Email link: “Support # contact us # email” on www.panasonic.ca  
PRODUCT REPAIRS  
Please locate your nearest Authorized Servicentre.  
Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca  
IF YOU SHIP THE PRODUCT TO A SERVICENTRE  
Carefully pack and send prepaid, adequately insured and preferably in the original carton.  
Include details of the defect claimed, and proof of date of original purchase.  
VQT3B58  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Referencia rápida en  
Reproducción básica  
español  
(Spanish Quick Reference)  
Preparación  
Encienda el televisor y seleccione la entrada de vídeo  
[Para EE.UU. y Canadá]  
adecuada en el televisor.  
Conexiones básicas  
1 Pulse [Í POWER] para encender la  
unidad.  
Conexión a un televisor  
compatible con HDMI  
Después de conectar su nuevo reprodutor y pulsar el  
botón de encendido, aparecerá la pantalla de la  
configuración básica.  
2 Inserte el medio.  
TX  
HDMI IN  
Inicia la reproducción  
AV OUT MAIN  
AV OUT  
10BASE-T/100BASE-TX  
Cable HDMI  
(incluido : DMP-BDT215)  
Pulse [1PLAY].  
COMMUNICATION  
CAMERA  
LAN  
AV OUT MAIN  
AV OUT SUB  
UNICATION  
AMERA  
Parada  
Conexión a un televisor con  
un cable para audio/vídeo  
Pulse [STOP].  
La posición de detención se memoriza.  
Cable de audio/vídeo  
Función de reanudación de la reproducción  
Pulse  
[1PLAY] para reiniciar la reproducción desde esta  
posición.  
La posición se borra si se abre la bandeja o se pulsa  
[STOP] varias veces para visualizar “STOP” en el visor  
de la unidad.  
R
L
R
L
AUDIO OUT  
VIDEO OUT  
AUDIO IN VIDEO IN  
10  
En los discos BD-Video incluidos los BD-J, la función  
de reanudación de la reproducción no funciona.  
R
L
UT  
COMMUNICATION  
CAMERA  
A
U
D
I
O
O  
VIDEO OUT  
Conexión a un televisor compatible  
con HDMI y a un amplificador/  
receptor compatible con HDMI  
Pausa  
Pulse [;PAUSE].  
Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la  
reproducción.  
TX  
HDMI IN  
AV OUT MAIN  
AV OUT  
Búsqueda/Cámara lenta  
Cable HDMI  
10BASE-T/100BASE-TX  
(incluido : DMP-BDT215)  
Búsqueda  
COMMUNICATION  
CAMERA  
VIDEO OUT  
LAN  
AV OUT MAIN  
AV OUT SUB  
Durante la reproducción, pulse [SEARCH6] o  
[SEARCH5].  
Música y MP3: La velocidad está fija en un paso.  
Altavoces multicanal  
Amplificador/Receptor  
Cámara lenta  
HDMI IN  
(ARC)  
HDMI OUT  
(ARC)  
Cable HDMI  
Durante la pausa, pulse [SEARCH6] o [SEARCH5].  
BD-Video y AVCHD: Sólo dirección en avance  
[SEARCH5].  
La velocidad aumenta hasta 5 pasos.  
Pulse [1PLAY] para recuperar la velocidad de  
reproducción normal.  
Conecte el cable de  
alimentación de CA por último  
A una toma de corriente doméstica  
Salto  
AC IN  
Durante la reproducción o la pausa, pulse [:] o  
[9].  
Salta hasta el título, capítulo o pista que desee reproducir.  
Cada pulsación aumenta el número de saltos.  
R
L
AUDIO OUT  
V
COMMUNICATION  
CAMERA  
Cable de alimentación de CA  
(incluido)  
Conéctelo cuando haya realizado el resto de conexiones.  
Ahorro de energía  
Esta unidad consume una pequeña cantidad de energía  
aunque esté ajustada en el modo de espera (Accionamiento  
rápido : Desactivado, aprox. 0,1 W). Para ahorrar energía  
cuando no vaya a utilizar la unidad durante mucho tiempo,  
desenchúfela de la toma de corriente.  
VQT3B58  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
A Audio  
Changing audio . . . . . . . . . . . . 17  
MMedia Renderer. . . . . . . . . . . . . . 25  
NNetwork  
24p. . . . . . . . . . . . . . . . . . . . . 28, 31  
3D. . . . . . . . . . . . . . . . . . . . . . . . . 20  
Language . . . . . . . . . . . . . . 27, 29  
B BD-Live . . . . . . . . . . . . . . . . . . . . 19  
C Chapter . . . . . . . . . . . . . . . . . . . . 18  
D DivX . . . . . . . . . . . . . . . . . . . . 18, 39  
DLNA . . . . . . . . . . . . . . . . . . . . . . 24  
F File format. . . . . . . . . . . . . . . . . . 39  
Firmware update . . . . . . . . . . . . 15  
L LAN . . . . . . . . . . . . . . . . . . . . . . . 10  
Connection . . . . . . . . . . . . . . . 10  
Setting . . . . . . . . . . . . . . . . 13, 32  
P Playlists . . . . . . . . . . . . . . . . . . . 18  
Pop-up menu . . . . . . . . . . . . . . . 17  
Q Quick Start. . . . . . . . . . . . . . . . . 33  
R Re-master. . . . . . . . . . . . . . . . . . 28  
Restore Default Settings . . . . . 33  
Resume play function. . . . . . . . 17  
S Subtitle. . . . . . . . . . . . . . . . . . . . 27  
U USB device . . . . . . . . . . . . . . . . . 7  
V VIERA CASTTM . . . . . . . . . . . . . 23  
Language  
Audio . . . . . . . . . . . . . . . . . 27, 29  
Menu . . . . . . . . . . . . . . . . . . . . 29  
On-screen. . . . . . . . . . . . . . . . . 31  
Soundtrack . . . . . . . . . . . . . . . . 27  
Subtitle . . . . . . . . . . . . . . . . 27, 29  
VIERA LinkTM  
“HDAVI ControlTM” . . . . . . . . . . . . 26  
W Wireless LAN. . . . . . . . . . . . . . . 10  
USA Only: Disposal may be regulated in your community  
due to Environmental considerations. For disposal or  
recycling information, please visit Panasonic Website:  
or call 1-888-769-0149.  
Information on Disposal in other Countries outside  
the European Union  
As an ENERGY STAR® Partner, Panasonic  
has determined that this product meets the  
ENERGY STAR® guidelines for energy  
efficiency.  
This symbol is only valid in the European  
Union.  
If you wish to discard this product, please  
contact your local authorities or dealer and ask  
for the correct method of disposal.  
For Canada only: The word “Participant” is  
used in place of the word “Partner”.  
[For_U.S.A._and_Puerto_Rico]  
[For_Canada]  
[For_units_with_PX_printed_on_the_outer_packaging]  
pr  
Panasonic Consumer Electronics Panasonic Canada Inc.  
Panasonic Corporation  
Corporate Management  
Division For North America  
Sales Team  
5770 Ambler Drive  
Mississauga, Ontario  
L4W 2T3  
Company, Division of Panasonic  
Corporation of North America  
One Panasonic Way, Secaucus,  
New Jersey 07094  
1-61, Shiromi 2-Chome, Chuo-ku, Osaka  
City 540-6255, Japan  
VQT3B58-2  
C Panasonic Corporation 2010  
F1210SK2051  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Speaker 2592 20 User Manual
MTX Audio Car Stereo System TA3401 User Manual
NETGEAR Network Router MBRN3000 100NAS User Manual
NETGEAR Network Router WNR200v4 User Manual
Niles Audio Speaker CM710SI User Manual
Nostalgia Electrics Portable Media Storage MOS 400 User Manual
NuTone Gas Grill CVG 8 User Manual
Olympus Computer Drive MAUSB 200 User Manual
Omega Speaker Systems Gas Heater QC User Manual
Panasonic Cordless Telephone KX PRS120 User Manual