Operating Instructions
Digital Cordless Phone
Model No.
KX-TG6811E
KX-TG6812E
KX-TG6813E
Digital Cordless Answering System
Model No.
KX-TG6821E
KX-TG6822E
KX-TG6823E
KX-TG6824E
KX-TG6891E
Model shown is KX-TG6811.
Before initial use, see “Getting Started”
on page 11.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Please access our online customer survey:
TG68xxE(en)_1225_ver012.pdf
1
2012/12/25
16:30:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Model composition
n KX-TG6811 series
R Model shown is KX-TG6812.
n KX-TG6821 series
n KX-TG6891
R Model shown is KX-TG6822.
Base unit
Handset
Series
Model No.
Part No.
Part No.
Quantity
KX-TG6811
series
KX-TG6811
KX-TG6812
KX-TG6813
KX-TG6821
KX-TG6822
KX-TG6823
KX-TG6824
KX-TG6891
KX-TG6811
KX-TG6811
KX-TG6811
KX-TG6821
KX-TG6821
KX-TG6821
KX-TG6821
KX-TG6821
KX-TGA682
KX-TGA682
KX-TGA682
KX-TGA682
KX-TGA682
KX-TGA682
KX-TGA682
KX-TGA682
1
2
3
1
2
3
4
1
KX-TG6821
series
*1
*1 A key finder (KX-TGA20EX) is supplied in this model. The key finder is pre-registered to the
unit. By attaching the key finder to an easy-to-lose item in advance, you can locate and find
the mislaid item. Read the installation guide for more information on the key finder.
R The suffix (E) in the following model numbers will be omitted in these instructions:
KX-TG6811E/KX-TG6812E/KX-TG6813E/KX-TG6821E/KX-TG6822E/KX-TG6823E/
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
3
TG68xxE(en)_1225_ver012.pdf
3
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Feature differences
Intercom
Series
Answering system
Between handsets
*1
KX-TG6811 series
KX-TG6821 series
–
U
*1
U
U
*1 Single handset models: Intercom calls can be made between handsets by purchasing and
registering one or more optional handsets (page 5).
Accessory information
Supplied accessories
Quantity
Accessory item/
Part number
KX-TG6811
KX-TG6821
KX-TG6891
KX-TG6812
KX-TG6822
KX-TG6813
KX-TG6823
KX-TG6824
No.
A
B
C
AC adaptor for base
unit/PNLV226EZ
1
1
2
1
1
4
1
1
6
1
1
8
Telephone line cord/
PNJA1037Z (for U.K.)
Rechargeable
*1
batteries
*2
D
E
1
–
2
1
3
2
4
3
Handset cover
Charger/
PNLC1042ZB
F
AC adaptor for
charger/
–
1
2
3
PNLV233EKZ
*1 See page 5 for replacement battery information.
*2 The handset cover comes attached to the handset.
n For KX-TG6891
No.
G
Accessory item/Part number
Key finder/KX-TGA20EX
Quantity
1
1
H
CR coin cell lithium battery/CR2032
A
B
C
D
E
F
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
4
TG68xxE(en)_1225_ver012.pdf
4
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
G
H
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item
Model number
*1
Rechargeable
batteries
HHR-4MVE
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
DECT repeater
Key finder
KX-A405
*2
KX-TGA20EX
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By registering the key finder (4 max.) to a Panasonic Digital Cordless Phone and attaching it
to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key
finder is attached. Please visit our Web site:
Expanding your phone system
Handset (optional): KX-TGA681E
You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different
colour from that of the supplied handsets.
Sales and support information
Customer Communications Centre
R For customers within the U.K.: 0844 844 3899
R For customers within Ireland: 01289 8333
Direct Sales at Panasonic U.K.
R Order accessory and consumable items for your product with ease and confidence by phoning
our Customer Communications Centre Monday - Friday 9:00am - 5:00pm (Excluding public
holidays).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
5
TG68xxE(en)_1225_ver012.pdf
5
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
R Most major credit and debit cards accepted.
R All enquiries transactions and distribution facilities are provided directly by Panasonic U.K.
R Also available through our Internet is direct shopping for a wide range of finished products.
Take a browse on our website for further details.
General information
R This equipment is designed for use on the U.K. and Ireland analogue telephone network.
R In the event of problems, you should contact your equipment supplier in the first instance.
Declaration of Conformity:
R Panasonic System Networks Co., Ltd. declares that this equipment is in compliance with the
essential requirements and other relevant provisions of Radio & Telecommunications Terminal
Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are
available for download by visiting:
Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
6
TG68xxE(en)_1225_ver012.pdf
6
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.88 GHz to 1.90 GHz, and the RF
transmission power is 250 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact an
authorised service centre.
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.
CAUTION
Installation and location
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R This product is unable to make calls when:
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
7
TG68xxE(en)_1225_ver012.pdf
7
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
– the handset batteries need recharging or
have failed.
– there is a power failure.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
– the key lock feature is turned on.
SAVE THESE INSTRUCTIONS
Battery
R We recommend using the batteries noted
on page 5. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
R Coverage and voice quality depends on the
local environmental conditions.
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Important safety
instructions
Environment
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as radiators, cookers, etc. It
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
8
TG68xxE(en)_1225_ver012.pdf
8
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
should not be placed in rooms where the
temperature is less than 0 °C or greater
than 40 °C. Damp basements should also
be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
These symbols (A, B, C) on the products,
packaging, and/or accompanying documents
mean that used electrical and electronic
products and batteries should not be mixed
with general household waste.
For proper treatment, recovery and recycling
of old products and used batteries, please
take them to applicable collection points, in
accordance with your national legislation and
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries
correctly, you will help to save valuable
resources and prevent any potential negative
effects on human health and the environment
which could otherwise arise from inappropriate
waste handling.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
For more information about collection and
recycling of old products and batteries, please
contact your local municipality, your waste
disposal service or the point of sale where you
purchased the items.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
For business users in the European
Union
Notice for product disposal, transfer,
or return
If you wish to discard electrical and electronic
equipment, please contact your dealer or
supplier for further information.
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Information on Disposal in other
Countries outside the European Union
These symbols (A, B, C) are only valid in
the European Union. If you wish to discard
these items, please contact your local
authorities or dealer and ask for the correct
method of disposal.
Information for Users on Collection
and Disposal of Old Equipment and
used Batteries
Note for the battery symbol
This symbol (B) might be used in
1
2
3
combination with a chemical symbol (C). In
this case it complies with the requirement set
by the Directive for the chemical involved.
Specifications
R Standard:
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
9
TG68xxE(en)_1225_ver012.pdf
9
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
DECT (Digital Enhanced Cordless
Telecommunications),
GAP (Generic Access Profile)
R Frequency range:
1.88 GHz to 1.90 GHz
R RF transmission power:
Approx. 10 mW (average power per
channel)
R Power source:
220–240 V AC, 50/60 Hz
R Power consumption:
*1
Base unit
:
Standby: Approx. 0.6 W
Maximum: Approx. 2.5 W
*2
Base unit
:
Standby: Approx. 0.8 W
Maximum: Approx. 3.1 W
Charger:
Standby: Approx. 0.12 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C–40 °C, 20 %–80 % relative air
humidity (dry)
*1 KX-TG6811 series: page 3
*2 KX-TG6821 series: page 3
Note:
R Design and specifications are subject to
change without notice.
R The illustrations in these instructions may
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
10
TG68xxE(en)_1225_ver012.pdf
10
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
n Charger
R Use only the supplied Panasonic AC
adaptor PNLV233E.
Setting up
Connections
n Base unit
“Click”
R Use only the supplied Panasonic AC
adaptor PNLV226E.
To power outlet
Press plug firmly.
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
Hook
“Click”
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
Use only the supplied
telephone line cord.
R Confirm correct polarities (
,
).
(DSL/ADSL filter*)
To telephone line
To power outlet
Incorrect
Correct
Rechargeable Ni-MH ONLY
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
R When the date and time setting is
displayed, see page 16.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
11
TG68xxE(en)_1225_ver012.pdf
11
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
R Wipe the battery ends (
cloth.
,
) with a dry
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
“Fully charged” is displayed.
R Avoid touching the battery ends (
the unit contacts.
,
) or
Note for battery charging
Confirm “Charging” is displayed.
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery level
Icon
Battery level
High
Medium
Note when setting up
Low
Note for connections
Needs charging.
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
Operating time
In continuous use
15 hours max.
Not in use (standby) 170 hours max.
Note:
During a power failure
R It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge (use).
R Actual battery performance depends on
usage and ambient environment.
R Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
jack using a T-adaptor. Your Panasonic sales
shop can offer you more information about
connection possibilities.
Note for battery installation
R The battery level may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 5, 8.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
12
TG68xxE(en)_1225_ver012.pdf
12
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
unit or charger and let it charge for at least
7 hours.
MR/ECON
R: Recall/Flash
ECO: Eco mode shortcut key
N (Smart Function Key/Noise
M
Controls
reduction key)
NR indicator
Handset
Charge contacts
n Control type
F
Soft keys
The handset features 2 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
G
Navigator key
–
–
MDN, MCN, MFN, or MEN: Scroll through
various lists and items.
A
MDN or MCN: Adjust the receiver or
speaker volume while talking.
MCN ( : Caller list): View the caller list.
MFN (W: Phonebook): View the
phonebook entry.
B
C
H
–
–
–
MEN (T: Redial): View the redial list.
D
E
I
J
Base unit
n KX-TG6811 series: page 3
A
B
K
Speaker
N (Talk)
M
Charge contacts
Dial keypad
M
N (Locator)
MZN (Speakerphone)
Microphone
Receiver
Display
MeN (Off/Power)
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
13
TG68xxE(en)_1225_ver012.pdf
13
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
n KX-TG6821 series: page 3
Item
Meaning
A
B
C D E
The line is in use.
R When flashing slowly: The
call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
*1
Missed call (page 34)
The base unit transmission
power is set to “Low”.
(page 17)
Noise reduction is set.
(page 20)
F
G
H
The LCD and key backlight is
off. (page 27)
Charge contacts
Speaker
R When displayed next to the
M
M
N (Locator)
battery icon: Answering
*2
system is on. (page 36)
N (Erase)
R When displayed with a
number:
Message counter
MjN/MkN (Volume up/down)
New messages have been
*2
recorded. (page 38)
M
M
N/M N (Repeat/Skip)
“Greeting Only” is
selected as the caller’s
recording time. In this case,
the answering system
answers calls with a greeting
message and caller
N (Play/Stop)
Message indicator
N (Answer on)
M
*2
messages are not recorded.
(page 42)
Display
Battery level
Handset display items
Alarm is on. (page 29)
Item
Meaning
Equalizer is set. (page 20)
Range status: The more bars
visible, the closer the handset
is to the base unit.
(page 27)
Ringer volume is off.
(page 19)
Out of base unit range
Paging, intercom mode
Night mode is on. (page 30)
Z
Speakerphone is on.
(page 18)
*1
Blocked call (page 30,
34)
New voice mail message
*3
received. (page 43)
Line in
use
Someone is using the line.
TG68xxE(en)_1225_ver012.pdf
14
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Item
Meaning
Icon
Action
IN USE
Answering system is being
used by another handset or
the base unit.
Snooze button on the alarm.
(page 29)
*2
Selects entries or handsets.
(page 17, 29)
*1 Caller ID subscribers only
*2 KX-TG6821 series: page 3
*3 Voice mail subscribers only
*1
n
Stops recording or playback.
Stores phone numbers.
(page 18)
Base unit display items
Erases the selected item.
n KX-TG6821 series: page 3
Allows you to make an intercom
call. (page 44)
Item
Meaning
C
Erases a number/character.
Puts the call on mute.
- -
“Greeting Only” is
selected as the caller’s
recording time. In this case,
the answering system
answers calls with a greeting
message and caller
*1 KX-TG6821 series: page 3
Handset main menu icons
messages are not recorded.
(page 42)
The following icons are shown when you
press M N (right soft key) in standby mode.
Handset soft key icons
Icon
Feature
*1
Answer System
Time Settings
Intercom
Icon
Action
Returns to the previous screen or
outside call.
Displays the menu.
Initial Setup
OK
Accepts the current selection.
Makes a call. (page 18)
Caller List
*2
Key Finder
Temporarily turns off the ringer
for incoming calls. (page 19)
*3, *4
*5
Ringer Setup
Places a call on hold.
Opens the phonebook.
Caller Barred
*1 KX-TG6821 series: page 3
*2 This icon is displayed when the key finder
Allows you to edit phone
numbers. (page 31)
*4 KX-TG6821 series (including
when the key finder is not registered.
displayed when the key finder is not
registered.
Adds new entry. (page 23, 31)
Displays the character entry
mode for phonebook search.
(page 21)
Turns the key lock feature off.
(page 20)
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
15
TG68xxE(en)_1225_ver012.pdf
15
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
Turning the power on/off
4
MOKN a MeN
Power on
Note:
Press MeN for about 1 second.
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Power off
Press MeN for about 2 seconds.
Smart Function Key (NR
key)
The Smart Function Key (NR key) is located
on the bottom of the handset and informs you
with its flashing to allow you to activate the
following features by simply pressing this key.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing M N, #, and then the
corresponding code on the dial keypad
(page 24).
Example: Press M N#101.
n Symbol meaning:
Example: MbN: “Off”
n When the NR indicator flashes rapidly,
you can:
– Answer the call (outside call, intercom).
(page 18, 44)
– Stop the alarm sound. (page 29)
– Stop paging. (page 44)
Press MCN or MDN to select the words in
quotations.
n When the NR indicator flashes slowly in
Display language
standby mode, you can:
– Listen to new messages. (page 38)
– View the caller list when there are
missed calls. (page 34)
Function Key must be “On”. (page 17)
*1 KX-TG6821 series: page 3
*1
1
2
M
N#110
MOKN
3
MeN
Date and time
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press MOKN, then
proceed to step 2.
When the NR indicator flashes rapidly/slowly,
press M
N.
R The above features can be activated
depending the situation.
R If you answer a call using the Smart
Function Key, the speakerphone is
activated.
1
2
M
N#101
Enter the current date, month, and year.
a MOKN
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
Example: 15 July, 2013
15 07 13
Enter the current hour and minute.
Example: 9:30
*1
messages without lifting up the handset. If
you want to perform further operations, lift
up the handset.
09 30
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
16
TG68xxE(en)_1225_ver012.pdf
16
2012/12/25
16:30:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
*1
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
“Normal”.
R When the unit has new messages and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
– When the one touch eco mode is on: “Low”
*1 KX-TG6821 series: page 3
is temporarily displayed and
on the handset display instead of
– When the one touch eco mode is off:
“Normal” is temporarily displayed and
is shown
.
Note:
calls can be answered, but the following
features are disabled even when the NR
indicator flashes slowly.
goes off from the handset display.
Note:
*1
R When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
R Activating one touch eco mode reduces the
range of the base unit in standby mode.
R If you set the repeater mode to “On” (page
32):
– View the caller list when there are
missed calls. (page 34)
Setting the Smart Function Key
features must be “On”.
– One touch eco mode is cancelled.
– “Eco Setup” is not shown in the
display menu (page 27).
*1
The settings can be set for each handset.
*1 KX-TG6821 series: page 3
1
2
M
N#278
MbN: Select the desired setting and press
N.
M
R “ ” is displayed next to the selected
features.
M
N again. “ ” disappears.
3
MOKN a MeN
Note:
R If the NR indicator flashes when the
handset is not placed on the base unit or
charger, battery consumption is faster than
usual.
One touch eco mode
The MR/ECON button on the handset enables
you to activate the eco function with one
touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to
90 % in standby mode.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
17
TG68xxE(en)_1225_ver012.pdf
17
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
2
3
MbN: Select the desired phone number.
a M
MbN: “Yes” a MOKN a MeN
N
Making calls
1
Lift the handset and dial the phone
number.
Pause (for PBX/long distance service
users)
R To correct a digit, press MCN.
2
3
Press M
N.
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 22).
When you finish talking, press MeN or
place the handset on the base unit or
charger.
Using the speakerphone
Example: If you need to dial the line access
number “0” when making outside calls with a
PBX:
1
Dial the phone number and press MZN.
R Speak alternately with the other party.
1
2
0 a MDN (Pause)
2
When you finish talking, press MeN.
Dial the phone number. a M
N
Note:
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press MZN/
R A 3 second pause is inserted each time MDN
(Pause) is pressed.
M
N.
Adjusting the receiver or speaker
volume
Answering calls
When a call is being received, the NR
indicator flashes rapidly.
Press MDN or MCN repeatedly while talking.
1
Lift the handset and press M
when the unit rings.
N or MZN
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
1
2
3
MEN (T)
2
When you finish talking, press MeN or
place the handset on the base unit or
charger.
MbN: Select the desired phone number.
M
N
Storing a number to the phonebook
Using the Smart Function Key
1
2
MEN (T)
When the NR indicator flashes rapidly, press
M
N.
MbN: Select the desired phone number.
R You can answer the call even if the handset
is placed on the base unit or charger
(page 16).
You can finish talking by pressing MeN
without lifting up the handset.
a M
N
3
To store the name, continue from step 3,
“Adding entries”, page 21.
Erasing a number in the redial list
1
MEN (T)
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
18
TG68xxE(en)_1225_ver012.pdf
18
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
Auto talk
Mute
You can answer calls simply by lifting the
handset off the base unit or charger. You do
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
not need to press M
N. To turn this feature
on, see page 27.
1
Press M N during conversation.
flashes.
R
Adjusting the handset ringer volume
2
To return to the conversation, press M
again.
N
n While the handset is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
Recall/flash
n Programming the volume beforehand:
MR/ECON allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
1
2
3
M
N#160
MbN: Select the desired volume.
MOKN a MeN
Note:
R To change the recall/flash time, see
page 27.
Temporary handset ringer off
While the handset is ringing for a call, you can
turn the ringer off temporarily by pressing M N.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed after you hear
the call waiting tone on the handset.
Useful features during a
call
Hold
This feature allows you to put an outside call
on hold.
1
2
3
Press M N during an outside call.
MbN: “Hold” a MOKN
1
2
Press MR/ECON to answer the 2nd call.
To release hold, press M
R Another handset user can take the call
by pressing M N.
N.
To switch between calls, press MR/ECON.
Note:
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound and
the NR indicator flashes rapidly. After 1
additional minute on hold, the call is
disconnected.
R If another phone is connected to the same
line, you can also take the call by lifting its
handset.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
19
TG68xxE(en)_1225_ver012.pdf
19
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
Handset noise reduction (NR key)
Key lock
This feature allows you to hear the voice of
the person you are talking to clearly, by
reducing the surrounding noise coming from
the other party’s telephone.
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
Press M
N to turn on/off while talking.
To turn key lock on, press M N for about 3
seconds.
Note:
R
is displayed.
R When this feature is turned on,
is
R To turn key lock off, press M N for about 3
seconds.
displayed while talking.
R Depending on the environment where this
handset is being used, this feature may not
be effective.
R This feature is not available using the
speakerphone.
Note:
R Calls to emergency numbers cannot be
made until key lock is turned off.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1
2
3
4
Press M N while talking.
MbN: “Equalizer” a MOKN
MbN: Select the desired setting.
Press MOKN to exit.
Note:
R When this feature is turned on,
is
displayed while talking.
R Depending on the condition and quality of
your telephone line, this feature may
emphasise existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
Call share
You can join an existing outside call.
To join the conversation, press M
N when
the other handset is on an outside call.
Note:
R To prevent other users from joining your
conversations with outside callers, turn the
privacy mode on (page 27).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
20
TG68xxE(en)_1225_ver012.pdf
20
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Shared Phonebook
2
Press the dial key (0 to 9, or #) which
contains the character you are searching
for (page 45).
Shared phonebook
The shared phonebook allows you to make
calls without having to dial manually. Any
handset registered to the base unit can use
the shared phonebook. You can add 120
names and phone numbers to the shared
phonebook.
R Press the same dial key repeatedly to
display the first entry corresponding to
each character located on that dial key.
R If there is no entry corresponding to
the character you selected, the next
entry is displayed.
Important:
3
4
MbN: Scroll through the phonebook if
necessary.
R Only 1 person can access the shared
phonebook at a time.
M
N
Adding entries
Editing entries
1
2
3
M
N or MFN (W) a M
N
1
2
3
Find the desired entry (page 21). a M
N
MbN: “New Entry” a MOKN
MbN: “Edit” a MOKN
Enter the party’s name (16 characters
max.). a MOKN
R You can change the character entry
mode by pressing MR/ECON
(page 45).
Edit the name if necessary (16 characters
max.; page 45). a MOKN
4
Edit the phone number if necessary (24
digits max.). a MOKN 2 times a MeN
4
5
Enter the party’s phone number (24 digits
max.). a MOKN 2 times
R To add other entries, repeat from step
3.
Erasing entries
Erasing an entry
MeN
1
2
3
Find the desired entry (page 21). a M
MbN: “Erase” a MOKN
N
Finding and calling from a
phonebook entry
MbN: “Yes” a MOKN a MeN
Erasing all entries
Scrolling through all entries
1
2
3
4
M
N
1
2
M
N or MFN (W)
MbN: “Erase All” a MOKN
MbN: “Yes” a MOKN
MbN: Select the desired entry.
R You can scroll through the phonebook
entry by pressing and holding MCN or
MDN.
MbN: “Yes” a MOKN a MeN
3
M
N
Chain dial
Searching by first character
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
1
M
N or MFN (W)
R Change the character entry mode if
necessary:
M
N a MbN: Select the character
entry mode. a MOKN
1
During an outside call, press M N.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
21
TG68xxE(en)_1225_ver012.pdf
21
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Shared Phonebook
2
3
4
MbN: “Phonebook” a MOKN
MbN: Select the desired entry.
Press M
N (right soft key) to dial the
number.
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press MDN (Pause) to add
pauses after the number and PIN as
necessary (page 18).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
22
TG68xxE(en)_1225_ver012.pdf
22
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed Dial
3
4
MbN: “Yes” a MOKN
Speed dial
You can assign 1 phone number to each of
MeN
the dial keys (1 to 6) on the handset.
Viewing speed dial key
assignments
You can see the speed dial key assignments
on the handset display.
Adding phone numbers to speed
dial keys
Press and hold the desired speed dial key (1
to 6).
n By entering phone numbers:
1
Press and hold the desired speed dial
key (1 to 6). a M
N
Making a call using a speed dial
key
2
3
MbN: “Manual” a MOKN
Enter the party’s name (16 characters
max.; page 45). a MOKN
1
Press and hold the desired speed dial key
(1 to 6).
4
Enter the party’s phone number (24
digits max.). a MOKN 2 times a
MeN
2
M
N
n From the shared phonebook:
1
Press and hold the desired speed dial
key (1 to 6). a M
N
2
3
4
MbN: “Phonebook” a MOKN
MbN: Select the desired entry.
MOKN a MeN
Note:
R If you edit a phonebook entry which is
assigned to a speed dial key, the edited
entry does not transfer to the speed dial
key.
Editing an entry
1
Press and hold the desired speed dial key
(1 to 6). a M
N
2
3
MbN: “Edit” a MOKN
Edit the name if necessary (16 characters
max.; page 45). a MOKN
4
Edit the phone number if necessary (24
digits max.). a MOKN 2 times a MeN
Erasing an entry
Press and hold the desired speed dial key
(1 to 6). a M
N
2
MbN: “Erase” a MOKN
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
23
TG68xxE(en)_1225_ver012.pdf
23
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1
2
3
4
M
N
Press MCN, MDN, MEN, or MFN to select the desired main menu. a MOKN
Press MCN or MDN to select the desired item from the next sub-menus. a MOKN
Press MCN or MDN to select the desired setting. a MOKN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN.
n Using the direct command code
1
M
N a Enter the desired code.
Example: Press M N#101.
2
Select the desired setting. a MOKN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MeN.
Note:
R In the following table, < > indicates the default settings.
R In the following table, indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
*1
Main menu:
Sub-menu 1
“Answer System”
Sub-menu 2
Settings
Code
#323
Play New Msg.
–
–
38
(Msg.: message)
Play All Msg.
–
–
–
–
–
#324
#325
#302
38
38
37
*2
Erase All Msg.
Greeting
*2
Start REC
(Record greeting)
Play Greeting
–
–
#303
#304
37
37
*2
Default
(Reset to pre-recorded
greeting)
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
24
TG68xxE(en)_1225_ver012.pdf
24
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Sub-menu 1
Sub-menu 2
Settings
Code
*2
Outgoing Call
1: On0: <Off>
#338
39
New Message Alert
– On/Off
Outgoing Call
–
– Notification to
Outgoing Call
1: Activate
– Remote Code
0: <Inactivate>
Base Unit Beep
1: On
0: <Off>
#339
#211
39
41
*2
Settings
2-9: 2-9 Rings
5: <5 Rings>
0: Auto
Number of Rings
*2
1: 1 Minute
#305
42
Recording Time
3: <3 Minutes>
0: Greeting Only
*3
*2
–
#306
#310
#327
#328
40
36
36
36
Call Screening
1: <On> 0: Off
*2
–
–
–
–
Answer On
*2
Answer Off
Main menu:
Sub-menu 2
Sub-menu 1
Settings
Code
#101
#720
*2
–
–
16
29
Set Date/Time
Memo Alarm
1-3: Alarm1-3
1: Once
2: Daily
3: Weekly
0: <Off>
*2, *4
–
1: <Caller ID>
#226
–
Time Adjustment
0: Manual
Main menu:
Operation
“Intercom”
Code
#274
Paging the desired unit.
44
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
25
TG68xxE(en)_1225_ver012.pdf
25
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Main menu:
“Initial Setup”
Sub-menu 1
Sub-menu 2
Settings
Code
#160
Ringer Setup
Ringer Volume
0-6: Off-6 <6>
19
–
– Handset
Ringer Volume
– Base Unit
0-6: Off-6 <3>
<Ringtone 1>
1: On0: <Off>
<23:00/06:00>
#G160
#161
#238
#237
#239
*1, *2
*5, *6
–
Ringtone
(Handset)
Night Mode
– On/Off
30
30
30
Night Mode
– Start/End
Night Mode
1: 30 sec.
– Ring Delay
2: <60 sec.>
3: 90 sec.
4: 120 sec.
0: No Ringing
*2, *7
1: <On> 0: Off
#173
#101
#720
–
First Ring
Set Date/Time
Memo Alarm
*2
Time Settings
–
16
29
1: Once
– 1-3: Alarm1-3
2: Daily
3: Weekly
0: <Off>
Time
Adjustment
1: <Caller ID>
0: Manual
#226
–
*2, *4
Handset Name
–
–
#104
30
–
*8
*2
Finder1
#6561
Key Finder Setup
Change Name
– 1: Add new device
(for Finder1)
– 2: Add new device
(for Finder2)
– 3: Add new device
*10
*11
Finder2
#6562
#6563
#6564
#6571
#6572
#6573
#6574
#6581
#6582
#6583
#6584
#217
*9
*10
*11
*11
Finder3
*10
Finder4
Register
–
–
–
*11
*11
*11
– 4: Add new device
(for Finder4)
Cancel Register
*11
*11
*11
*2
–
30
Caller Barred
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
26
TG68xxE(en)_1225_ver012.pdf
26
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Sub-menu 1
Speed Dial
Eco Setup
Sub-menu 2
–
Settings
Code
–
#261
23
17
Transmission
1: <Normal> 2: Low #725
*2
Power
Display Setup
LCD & Key
Backlight
1: <On> 0: Off
#276
#145
–
–
Contrast
1-6: Level 1-6
<4>
(Display contrast)
Smart Function Key
–
–
–
–
–
1: <On> 0: Off
–
#278
#165
#256
#200
#121
17
–
*12
Keytones
*2
31
19
19
Call Restrict
*13
1: On0: <Off>
Auto Talk
*2, *14
Line Setup
0: 900 msec.
1: 700 msec.
2: 600 msec.
3: 400 msec.
4: 300 msec.
5: 250 msec.
G: 200 msec.
#: 160 msec.
6: 110 msec.
7: <100 msec.>
8: 90 msec.
Recall/Flash
9: 80 msec.
*2, *15
–
–
–
1: On0: <Off>
<0000>
#194
#132
#138
#130
–
Privacy Mode
*2
31
32
32
Base Unit PIN
*2
1: On0: <Off>
–
Repeater Mode
Register
Register H.set
(H.set: handset)
*3
–
#131
#110
32
16
Cancel Register
Display
Language
<English>
Main menu:
“Caller List”
Operation
Code
Viewing the caller list.
#213
34
–
*8
Main menu:
“Key Finder”
Sub-menu 1
Search
Sub-menu 2
Settings
Code
#655
–
–
–
–
Battery Check
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
27
TG68xxE(en)_1225_ver012.pdf
27
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
*16, *17
Main menu: “Ringer Setup”
Sub-menu 1
Sub-menu 2
Settings
Code
#160
Ringer Volume
Handset
0-6: Off-6 <6>
0-6: Off-6 <3>
<Ringtone 1>
19
–
*1, *2
#G160
#161
Base Unit
*5, *6
–
–
Ringtone
(Handset)
Night Mode
On/Off
1: On0: <Off>
#238
#237
#239
30
30
30
Start/End
<23:00/06:00>
Ring Delay
1: 30 sec.
2: <60 sec.>
3: 90 sec.
4: 120 sec.
0: No Ringing
*2, *7
–
1: <On> 0: Off
#173
–
First Ring
*2, *18
Main menu:
Operation
“Caller Barred”
Code
#217
Storing/Viewing bar call numbers.
30
*2 If you program these settings using one of the handsets, you do not need to program the
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
information including date and time is received.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 16).
*5 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used with
permission of © 2012 Copyrights Vision Inc.
*7 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
on your service provider/telephone company.
*8 This setting is available when you have the key finder (KX-TGA20EX). Read the installation
guide for more information on the key finder.
*9 For models with supplied key finders, the display shows “1: Finder1”.
*10 If you register 2 or more key finders.
*11 If you have 2 or more key finders.
*12 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*13 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
28
TG68xxE(en)_1225_ver012.pdf
28
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
*14 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*15 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*16 KX-TG6811 series: page 3
*17 KX-TG6821 series (including KX-TG6891): this menu icon is displayed when the key finder
is not registered.
*18 KX-TG6811 series: this menu icon is displayed when the key finder is not registered.
n Weekly:
MbN: Select the desired day of the week
and press M N. a MOKN
Special programming
5
6
Set the desired time. a MOKN
Alarm
Enter a text memo (10 characters max.;
page 45). a MOKN
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
7
MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8
9
MbN: Select the desired snooze setting.
a MOKN
Important:
MOKN a MeN
R Set the date and time beforehand
(page 16).
R When the alarm is set,
is displayed.
Note:
1
2
M
N#720
R Press M N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Select an alarm by pressing 1 to 3. a
MOKN
3
MbN: Select the desired alarm option. a
MOKN
R Press any dial key, M
N, or M
N to stop
the sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
“Off”
Turns alarm off. Go to step 9.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 5.
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each handset.
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
29
TG68xxE(en)_1225_ver012.pdf
29
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Important:
Changing the handset name
R Set the date and time beforehand
(page 16).
Each handset can be given a customised
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is “No”. If you select
“Yes” without entering any handset name,
“Handset 1” to “Handset 6” is displayed.
R We recommend turning the base unit ringer
off (page 26) in addition to turning the night
mode on. (KX-TG6821 series: page 3)
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
2
M
N#104
1
2
M
N#238
Enter the desired name (max. 10
characters; page 45).
MbN: Select the desired setting. a MOKN
R If you select “Off”, press MeN to
exit.
R If not required, go to step 3.
3
4
MOKN
3
Enter the desired hour and minute you
wish to start this feature. a MOKN
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
MbN: Select the desired setting. a MOKN
2 times
5
MeN
4
5
Enter the desired hour and minute you
wish to end this feature. a MOKN
Incoming call barring (Caller ID
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
MeN
R When the night mode is set,
is
displayed.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit emits no sound to the caller, and
disconnects the call.
Changing the start and end time
1
2
M
N#237
Continue from step 3, “Turning night
mode on/off”, page 30.
Important:
R When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list
Setting the ring delay
This setting allows the handset to ring during
night mode if the caller waits long enough.
the handset never rings during night mode.
(page 34) with
disconnected.
after the call is
Storing unwanted callers
1
2
M
N#239
You can store up to 50 phone numbers in the
call barred list.
MbN: Select the desired setting. a MOKN
a MeN
Important:
Note:
R You must store the phone number with an
area code in the call barred list.
R When the answering system answers the
call, this feature does not work.
(KX-TG6821 series: page 3)
n From the caller list:
1
MCN (
)
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
30
TG68xxE(en)_1225_ver012.pdf
30
2012/12/25
16:30:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
2
MbN: Select the entry to be barred. a
R To cancel a selected handset, press
M
N
the same dial key again. “
disappears.
”
3
4
5
MbN: “Save CID” a MOKN
4
5
MOKN
MbN: “Caller Barred” a MOKN
MbN: “Yes” a MOKN a MeN
Select a memory location by pressing 1
to 6. a MOKN
n By entering phone numbers:
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MeN
R To erase a restricted number, press
MCN.
1
2
M
N#217 a M
N
Enter the phone number (24 digits
max.). a MOKN
R To erase a digit, press MCN.
3
MeN
Changing the base unit PIN
(Personal Identification Number)
Important:
Viewing/editing/erasing bar call
numbers
R If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 49.
1
2
M
N#217
MbN: Select the desired entry.
R To exit, press MeN.
3
To edit a number:
1
2
M
N#132
M
N a Edit the phone number. a
Enter the current 4-digit base unit PIN
(default: “0000”).
MOKN a MeN
To erase a number:
M
N a MbN: “Yes” a MOKN a MeN
3
4
Enter the new 4-digit base unit PIN. a
MOKN
Note:
MbN: “Yes” a MOKN a MeN
R When editing, press the desired dial key to
add, MCN to erase.
Setting call restriction
Registering a unit
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
1
2
M
N#256
R The additional handset model
recommended for use with this unit is noted
on page 5. If another handset model is
used, certain operations may not be
available.
Enter the base unit PIN (default: “0000”).
R If you forget your PIN, see page 49.
3
Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R “ ” is displayed next to the selected
handset numbers.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
31
TG68xxE(en)_1225_ver012.pdf
31
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
2
3
MbN: Select the handset you want to
cancel. a MOKN
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
MbN: “Yes” a MOKN
R A confirmation tone sounds.
R The handset does not beep when
cancelling its own registration.
4
MeN
near the base unit), re-register the handset.
1
Handset:
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 5. Contact your Panasonic dealer for
details.
M
N#130
2
Base unit:
Proceed with the operation for your model.
n KX-TG6811 series: page 3
Press and hold M N for about 5
seconds. (No registration tone)
n KX-TG6821 series: page 3
Press and hold M N for about 5
seconds, until the registration tone
sounds.
press M N again to stop, then repeat
this step.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
within 90 seconds.
Setting the repeater mode
3
Handset:
1
2
M
N#138
MOKN a Wait until “Base PIN” is
displayed. a Enter the base unit PIN
(default: “0000”). a MOKN
R If you forget your PIN, see page 49.
R When the handset has been registered
MbN: Select the desired setting. a MOKN
a MeN
Note:
R After turning the repeater mode on or off,
may be displayed on the handset
successfully,
is displayed.
momentarily. This is normal and the
Note:
handset can be used once
is displayed.
R While registering, “Base in
registering” is displayed on all
registered handsets.
R When you purchase an additional handset,
refer to the additional handset’s installation
manual for registration.
Registering the DECT repeater
(KX-A405) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1
Base unit:
Proceed with the operation for your model.
1
M
N#131
n KX-TG6811 series: page 3
Press and hold M N for about 5
seconds. (No registration tone)
R All handsets registered to the base unit
are displayed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
32
TG68xxE(en)_1225_ver012.pdf
32
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
n KX-TG6821 series: page 3
Press and hold M N for about 5
seconds, until the registration tone
sounds.
R The next step must be completed
within 90 seconds.
2
3
DECT repeater:
the
indicator and
indicator light
green.
Base unit:
To exit the registration mode, press M N.
R The registration tone stops.
(KX-TG6821 series: page 3)
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
33
TG68xxE(en)_1225_ver012.pdf
33
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Service
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
Using Caller ID service
Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
Caller list
Important:
R Only 1 person can access the caller list at a
time.
R Make sure the unit’s date and time setting
is correct (page 16).
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– “Out of Area”: The caller dials from
an area which does not provide a Caller
ID service.
– “Private Caller”: The caller
requests not to send caller information.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
Viewing the caller list and calling
back
1
MCN (
)
Press MCN to search from the most recent
call, or press MDN to search from the
oldest call.
R If is displayed, not all of the
information is shown. To see the
remaining information, press MEN. To
return to the previous screen, press
MFN.
3
To call back, press M
To exit, press MeN.
N.
Missed calls
If a call is not answered, the unit treats it as a
Note:
missed call and
is displayed. This lets you
R If the entry has already been viewed or
answered, “ ” is displayed, even if it was
viewed or answered using another handset.
R If the call matches an entry in the call
barred list, the number is logged with
(page 30).
know if you should view the caller list to see
who called while you were away.
Even if only one missed call in the caller list is
viewed (page 34),
disappears from the
display. When you receive another new call,
is displayed again.
Note:
Using the Smart Function Key
R Even when there are unviewed missed
calls,
disappears from the standby
When
flashes slowly, there are missed calls.
Press M N in step 1 on “Viewing the caller
is displayed and the NR indicator
display if the following operation is
performed by one of the registered
handsets:
– Being replaced on the base unit or
charger.
list and calling back”, page 34.
R “Missed Call” must be set to “On” in
“Setting the Smart Function Key”, page 17.
R If the handset is placed on the base unit or
charger, you need to lift up the handset to
– Pressing MeN.
Phonebook name display
view the caller list after pressing M
N.
*1
When caller information is received and it
matches a phone number stored in the
R When the unit has new messages and
missed calls, the unit can be operated to
34
TG68xxE(en)_1225_ver012.pdf
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Service
play the new messages first and then show
the missed calls.
*1 KX-TG6821 series: page 3
Editing a caller’s phone number
before calling back
1
2
3
4
MCN (
N a MbN: “Edit” a MOKN
)
M
Edit the number.
R Press dial key (0 to 9) to add, MCN to
delete.
5
M
N
Erasing selected caller
information
1
2
3
MCN (
MbN: Select the desired entry.
N a MbN: “Yes” a MOKN a MeN
)
M
Erasing all caller information
1
2
MCN (
)
M
N a MbN: “Yes” a MOKN a MeN
Storing caller information to the
phonebook
1
2
3
4
5
MCN (
)
MbN: Select the desired entry. a M
MbN: “Save CID” a MOKN
MbN: “Phonebook” a MOKN
N
To store the name, continue from step 3,
“Adding entries”, page 21.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
35
TG68xxE(en)_1225_ver012.pdf
35
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
Answering system
Turning the answering
system on/off
Available for:
KX-TG6821 series (page 3)
The answering system is preset to on.
Base unit
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
Press M
system.
N to turn on/off the answering
You can also set the unit to play a greeting
message but not to record caller messages by
time setting (page 42).
R When the answering system is turned on,
the message counter displays the total
number of messages (old and new).
Handset
Important:
1
To turn on:
R Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
R When callers leave messages, the unit
records the day and time of each message.
Make sure the date and time have been set
correctly (page 16).
M
N#327
To turn off:
M
N#328
2
Note:
MeN
R When the answering system is turned on,
is displayed next to the battery icon.
Memory capacity (including your
greeting message)
The total recording capacity is about 30
minutes. A maximum of 64 messages can be
recorded.
Call screening
While a caller is leaving a message, you can
listen to the call through the handset’s
speaker. To adjust the speaker volume, press
MDN or MCN repeatedly. You can answer the call
Note:
R When message memory becomes full:
– “Messages Full” is shown on the
handset display.
by pressing M
screening can be set for each handset. The
default setting is “On”.
N on the handset. Call
– The message counter on the base unit
flashes if the answering system is turned
on.
1
2
M
N#310
MbN: Select the desired setting. a MOKN
a MeN
–
and the total number of new
messages are not displayed on the
handset even if the answering system is
turned on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
36
TG68xxE(en)_1225_ver012.pdf
36
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
Recording your greeting message
Listening to messages
using the base unit
When new messages have been recorded,
1
2
3
M
N#302
MbN: “Yes” a MOKN
After a beep sounds, hold the handset
about 20 cm away and speak clearly into
the microphone (2 minutes and 30
seconds max.).
M
N on the base unit flashes.
Press M N.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
4
5
Press MnN to stop recording.
MeN
Operating the answering system
during playback
Using a pre-recorded greeting
message
Key
Operation
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
– If the message recording time (page 42)
is set to “Greeting Only”, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
MjN or MkN
Adjust the speaker volume
*1
M
M
M
M
N
N
Repeat message
Skip message
Stop playback
N
Erase currently playing
message
N
message, the previous message is
played.
message
Rewinding the message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
Press and hold M N until the unit plays the
desired part of the message.
R During rewinding, the base unit makes a
continuous beeping sound. Rewinding
speed may vary depending on the recorded
message.
1
2
M
N#304
MOKN a MeN
R At the beginning of the message, the unit
plays the message at normal speed.
Playing back the greeting
message
Fast-forwarding the message
Press and hold M N until the unit plays the
desired part of the message.
R During fast-forwarding, the base unit makes
a continuous beeping sound.
1
2
M
N#303
MeN
Fast-forwarding speed may vary depending
on the recorded message.
R Even if you press and hold M N when the
end of this message is played, the next
message is played at normal speed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
37
TG68xxE(en)_1225_ver012.pdf
37
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
Key
Operation
Erasing all messages
*2
M
N
Pause message
Press M N 2 times while the unit is not in use.
9 or MnN
Stop recording
Stop playback
0
Turn answering system off
Listening to messages
using the handset
When new messages have been recorded,
is displayed on the handset with the total
number of new messages.
*3
Erase currently playing
message
*4
*5
*6
Erase all messages
Reset to a pre-recorded
greeting message
1
To listen to new messages:
N#323
To listen to all messages:
N#324
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN: “Play” a MOKN
M
M
2
Note:
When finished, press MeN.
*3 You can also erase as follows:
M
N a MbN: “Erase” a MOKN a MbN:
R To switch to the receiver, press M
N.
“Yes” a MOKN
Using the Smart Function Key
Calling back (Caller ID
subscribers only)
If caller information is received for the call, you
can call the caller back while listening to a
message.
When
flashes slowly, there are new messages.
Press M N in step 1 on “Listening to
messages using the handset”, page 38.
R “New Message” must be set to “On” in
“Setting the Smart Function Key”, page 17.
is displayed and the NR indicator
1
2
Press M N during playback.
MbN: “Call Back” a MOKN
Operating the answering system
M
N a
Editingthe numberbeforecallingback
Key
Operation
1
2
3
Press M N during playback.
1 or MFN
2 or MEN
volume (during playback)
MbN: “Edit & Call” a MOKN
Edit the number. a M
N
Repeat message
(during playback)
*1
Skip message
(during playback)
Erasing all messages
1
2
M
N#325
3
Enter the “Settings” menu
Play new messages
MbN: “Yes” a MOKN a MeN
4
5
Play all messages
6
Play greeting message
Record greeting message
Turn answering system on
76
8
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
38
TG68xxE(en)_1225_ver012.pdf
38
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
4
MbN: Select the desired phonebook
entry. a MOKN a MeN
Advanced new message
alerting features
n By entering a phone number:
1
2
M
N#338
MbN: “Notification to” a MOKN
a M
Audible message alert
N
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the “Base Unit Beep”
setting is turned on. The default setting is
“Off”.
3
4
MbN: “Manual” a MOKN
Enter the desired name (16 characters
max.; page 45). a MOKN
5
Enter the desired number (24 digits
max.). a MOKN 2 times a MeN
1
2
M
N#339
Turning on/off the new message alert
setting
MbN: Select the desired setting. a MOKN
a MeN
2
3
M
N#338
MbN: “On/Off” a MOKN
New message alert by a call
MbN: Select the desired setting. a MOKN
a MeN
This feature allows the unit to make a call to
the pre-stored phone number and inform you
that a new message has been received by
announcement.
Editing the set phone number
To use this feature, you must:
– store a phone number to which the unit
makes the call to.
– turn on the new message alert setting.
After you answer the new message alert call,
you can listen to messages from that call
(page 40).
1
2
3
4
M
N#338
MbN: “Notification to” a MOKN
N a MbN: “Edit” a MOKN
M
Edit the name if necessary (16 characters
max.; page 45). a MOKN
5
Edit the phone number if necessary (24
digits max.). a MOKN 2 times a MeN
Important:
R The unit makes a call to the pre-stored
phone number after the new message is
recorded:
Erasing the set phone number
– If the call is answered, the
announcement is repeated for about 1
minute.
– If nobody answers within 1 minute, the
unit will not retry the call.
1
3
4
M
N#338
MbN: “Notification to” a MOKN
N a MbN: “Erase” a MOKN
M
MbN: “Yes” a MOKN a MeN
R The new message alert setting is
turned off.
Storing a phone number to which the
unit makes an alert call
Activating/inactivating the remote
access code to play messages
n From the phonebook:
1
2
M
N#338
MbN: “Notification to” a MOKN
a M
MbN: “Phonebook” a MOKN
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
If you activate this feature, you must enter the
remote access code (page 40) to play the
new message from the new message alert
N
3
39
TG68xxE(en)_1225_ver012.pdf
39
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
call. This is so that unauthorised parties
cannot listen to your messages. The default
setting is “Inactivate”.
– “Inactivate”: You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorised
parties from listening to your messages
remotely.
– “Activate”: You must enter your remote
access code (page 40) and then press 4
to play new message.
Important:
R In order to operate the answering system
remotely, you must first set a remote
access code.
1
2
3
M
N#338
MbN: “Remote Code” a MOKN
1
2
M
N#306
MbN: “Activate” or “Inactivate” a
MOKN a MeN
To turn on remote operation, enter the
desired 3-digit remote access code.
3
MOKN a MeN
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
Deactivating remote operation
Press * in step 2 on “Remote access code”,
page 40.
R The entered remote access code is deleted.
n When the remote access code is set to
“Inactivate”:
Press 4 to play the new message during
the announcement.
Using the answering system
remotely
n When the remote access code is set to
“Activate”:
1
Enter the remote access code
1
2
3
Dial your phone number from a
touch-tone phone.
2
Press 4 to play the new message.
After the greeting message starts, enter
your remote access code.
Note:
R After listening to new messages, you can
press #9 during the call to turn off the
new message alert by a call feature.
R Even if the unit makes a new message alert
call, the handset redial list does not show
the record.
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 41).
4
When finished, hang up.
Voice guidance
During remote operation, the unit’s voice
to perform a specific operation, or press 2 to
listen to more available operations.
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
Note:
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
40
TG68xxE(en)_1225_ver012.pdf
40
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Answering system settings
Number of rings before the unit
answers a call
Key
Operation
You can change the number of times the
phone rings “Number of Rings” before the
unit answers a call. You can select 2 to 9
rings, or “Auto”.
1
Repeat message
(during playback)
*1
2
Skip message
(during playback)
The default setting is “5 Rings”.
“Auto”: The unit’s answering system answers
at the end of the 2nd ring when new
4
5
6
7
9
Play new messages
Play all messages
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 40), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
Play greeting message
Record greeting message
Stop recording
Stop playback
0
Turn answering system off
1
2
M
N#211
*4 Erase currently playing message
MbN: Select the desired setting. a MOKN
*5 Erase all messages
*6 Reset to a pre-recorded greeting
message (during greeting message
playback)
For voice mail service subscribers
*# End remote operation
To receive voice mail and use answering
system properly, please note the following:
R To use the voice mail service (page 43)
provided by your service provider/telephone
company rather than the unit’s answering
system, turn off the answering system
(page 36).
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
R To use this unit’s answering system rather
than the voice mail service provided by
please contact your service provider/
telephone company to deactivate your
voice mail service.
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1
2
3
Dial your phone number from a
touch-tone phone.
If your service provider/telephone company
cannot do this:
– Set this unit’s “Number of Rings”
setting so that this unit’s answering
system answers calls before the voice
mail service of your service provider/
telephone company does. It is necessary
to check the number of rings required to
activate the voice mail service provided
by your service provider/telephone
company before changing this setting.
Let the phone ring 20 times.
R A long beep is heard.
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 40).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
41
TG68xxE(en)_1225_ver012.pdf
41
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
– Change the number of rings of the voice
mail service so that the answering
system can answer the call first. To do
so, contact your service provider/
telephone company.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is “3 Minutes”.
1
2
M
N#305
MbN: Select the desired setting. a MOKN
a MeN
Selecting “Greeting Only”
You can select “Greeting Only” which sets
the unit to announce a greeting message to
callers but not record messages.
Select “Greeting Only” in step 2 on
“Caller’s recording time”, page 42.
Note:
R When you select “Greeting Only”:
– If you do not record your own message,
the unit will play the pre-recorded
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 37).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
42
TG68xxE(en)_1225_ver012.pdf
42
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Mail Service
Voice mail service
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone.
When you have new messages,
is
displayed on the handset if message
indication service is available. Please contact
your service provider/telephone company for
details of this service.
Important:
R If
still remains on the display even after
you have listened to new messages, turn it
off by pressing and holding # for 2
seconds.
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 36).
For details, see page 41.
(KX-TG6821 series: page 3)
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
43
TG68xxE(en)_1225_ver012.pdf
43
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom/Locator
Intercom
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
Intercom calls can be made between
handsets.
Note:
R When paging the handset, the paged
handset beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones. To
answer the call, press MeN, then press
1
During an outside call, press M N to put
the call on hold.
2
3
4
MbN: “Intercom” a MOKN
M
N.
MbN: Select the desired unit. a MOKN
Wait for the paged party to answer.
R If the paged party does not answer,
Making an intercom call
press M
N to return to the outside call.
1
2
M
N a M
N
5
To complete the transfer:
Press MeN.
R The outside call is being routed to the
destination unit.
MbN: Select the desired unit. a MOKN
R To stop paging, press MeN.
3
When you finish talking, press MeN.
To establish a conference call:
M
N a MbN: “Conference” a MOKN
R To leave the conference, press
MeN. The other 2 parties can
continue the conversation.
R To put the outside call on hold: M
a MbN: “Hold” a MOKN
Answering an intercom call
1
2
Press M
N to answer the page.
N
When you finish talking, press MeN.
To resume the conference: M N a
MbN: “Conference” a MOKN
Using the Smart Function Key
R To cancel the conference: M N a
MbN: “Stop Conference” a MOKN
You can continue the conversation
with the outside caller.
Press M
N to answer the page.
Handset locator
You can locate a misplaced handset by
paging it.
Answering a transferred call
Press M
N to answer the page.
1
Base unit: Press M N.
R All registered handsets beep for 1
minute.
Using the Smart Function Key
Press M
N to answer the page.
2
To stop paging:
Base unit: Press M N.
Handset: Press MeN.
Using the Smart Function Key
You can also stop paging by pressing M
N.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
44
TG68xxE(en)_1225_ver012.pdf
44
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode
(page 45).
– Press MFN or MEN to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press MCN to erase the character or number highlighted by the cursor. Press and hold MCN to
erase all characters or numbers.
– Press * (Aaa) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press MEN to move the cursor to the
next space, then press the appropriate dial key.
– If you do not press any dial key within 5 seconds after entering a character, the character is
fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek (
),
Extended 1 ( ), Extended 2 ( ), and Cyrillic ( ). When in these entry modes except
Numeric, you can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
MR/ECON a MbN: Select a character entry mode. a MOKN
Note:
R
in the following tables represents a single space.
Alphabet character table (ABC)
1
2 3
4
5 6 7
8
9 y
z
Numeric entry table (0-9)
z
1
2
3
4
5
6
7
8
9 y
Greek character table (
)
z
1
2
3
4
5
6
7
8
9 y
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
45
TG68xxE(en)_1225_ver012.pdf
45
2012/12/25
16:30:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Extended 1 character table (
)
z
1
2 3
4
5 6
7
8
9 y
R The following are used for both uppercase and lowercase:
Extended 2 character table (
)
z
1
2
3
4
5
6
7
8
9 y
R The following are used for both uppercase and lowercase:
Cyrillic character table (
)
z
y
1
2
3
4
5
6
7
8
9
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
46
TG68xxE(en)_1225_ver012.pdf
46
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Error messages
Display message
Cause/solution
Base no power
or
No link. Reconnect
AC adaptor.
R The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been cancelled.
Re-register the handset (page 32).
Check Phone Line
R The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 11).
Error
R Recording was too short. Try again.
Memory Full
R The phonebook memory is full. Erase unwanted entries
(page 21).
(page 37, 38).
(page 31).
Use rechargeable
battery.
R A wrong type of battery such as Alkaline or Manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 5, 8.
You must first
subscribe to Caller
ID.
R You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
47
TG68xxE(en)_1225_ver012.pdf
47
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor and turn off the handset, then reconnect the base unit’s AC adaptor and turn on the
handset.
General use
Problem
Cause/solution
The handset does not turn R Place the handset on the base unit or charger to turn on the
on even after installing
charged batteries.
handset.
The unit does not work.
R Make sure the batteries are installed correctly (page 11).
R Fully charge the batteries (page 12).
R Check the connections (page 11).
R Unplug the base unit’s AC adaptor to reset the unit and turn off
the handset. Reconnect the adaptor, turn on the handset and
try again.
R The handset has not been registered to the base unit. Register
the handset (page 32).
The handset display is
blank.
I cannot hear a dial tone.
R Make sure that you are using the supplied telephone line cord.
Your old telephone line cord may have a different wiring
configuration.
connected. Check the connections.
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel to
have the unit repaired. If the working telephone does not
operate properly, contact your service provider/telephone
company.
I cannot use the Smart
Function Key even if the
NR indicator is flashing
slowly.
R Another unit is in use. Wait and try again later.
R The key lock feature is turned on. Turn it off (page 20).
The base unit beeps.
R New messages have been recorded. Listen to the new
messages (page 37).
Programmable settings
Problem
Cause/solution
The display is in a
R Change the display language (page 16).
language I cannot read.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
48
TG68xxE(en)_1225_ver012.pdf
48
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Problem
Cause/solution
I cannot activate the eco
mode.
R You cannot set eco mode when you set the repeater mode
“On”. If required, set the repeater mode to “Off” (page 32).
I cannot register a handset R The maximum number of handsets (6) is already registered to
to a base unit.
the base unit. Cancel unused handset registrations from the
base unit (page 32).
R You entered the wrong PIN. If you forget your PIN, see “I
cannot remember the PIN.” (page 49).
I cannot remember the
PIN.
1
2
3
4
M
N#132
*7000
Enter the new 4-digit base unit PIN. a MOKN
Battery recharge
Problem
Cause/solution
The handset beeps and/or R Battery charge is low. Fully charge the batteries (page 12).
flashes.
I fully charged the
batteries, but
R Clean the battery ends (
a dry cloth and charge again.
R It is time to replace the batteries (page 11).
,
) and the charge contacts with
–
still flashes or
– the operating time
seems to be shorter.
Making/answering calls, intercom
Problem
is displayed.
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 32).
R Activating one touch eco mode reduces the range of the base
unit in standby mode. If required, turn eco mode off (page 17).
Noise is heard, sound cuts R You are using the handset or base unit in an area with high
in and out.
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
Sound quality seems to be R You have registered a handset that is not recommended
getting worse.
(page 5). The clearest sound quality is only possible by
registering the recommended handset.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
49
TG68xxE(en)_1225_ver012.pdf
49
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Problem
Cause/solution
The handset does not ring. R The ringer volume is turned off. Adjust ringer volume (page 19,
26).
R Night mode is turned on. Turn it off (page 30).
The base unit does not
ring.
R The ringer volume is turned off. Adjust ringer volume (page 26).
I cannot make a call.
R You dialled a call restricted number (page 31).
Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
Caller information is slow
to display.
R Depending on your service provider/telephone company, the
unit may display the caller’s information at the 2nd ring or later.
Set the first ring to “Off” (page 26).
R Move closer to the base unit.
Time on the unit has
shifted.
R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to “Manual” (off) (page 26).
The name stored in the
phonebook is not fully
displayed while an outside
call is being received.
R Edit the phonebook entry name to fit in 1 line of text (page 21).
Answering system
Problem
Cause/solution
The unit does not record
new messages.
R The answering system is turned off. Turn it on (page 36).
R The message memory is full. Erase unwanted messages
(page 37).
R The recording time is set to “Greeting Only”. Change the
setting (page 42).
R If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company, not
contact your service provider/telephone company (page 41).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
50
TG68xxE(en)_1225_ver012.pdf
50
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Problem
Cause/solution
I cannot operate the
answering system
remotely.
R The remote access code is not set. Set the remote access
code (page 40).
R You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 40).
R The answering system is turned off. Turn it on (page 41).
The unit does not emit the R If the first ring is turned off, the number of rings decreases by 1
specified number of rings.
from the specified number of rings.
Liquid damage
Problem
Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
51
TG68xxE(en)_1225_ver012.pdf
51
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Conditions of guarantee
This guarantee is in addition to and does not in any way affect any statutory or other rights of
consumer purchasers. If within the applicable guarantee period, the product proves to be
defective by reason of faulty design, workmanship or materials, we undertake subject to the
following conditions to have the defective product (or any part or parts there of) repaired or
replaced free of charge.
1. The product shall have been purchased and used solely within either the U.K. or Ireland
and in accordance with standard operating instructions and the technical and/or Safety
Standards required in the U.K.
2. On being found defective, please consult with the retailer from where it was purchased for
assistance.
3. This guarantee shall not apply to damage caused through fire, accident, lightning, misuse,
wear and tear, neglect, incorrect adjustment or repair, to damage caused through
installation, adaption, modification or use in an improper manner or inconsistent with the
technical and/or safety standards required in the country where this product is used, or to
damage occurred during transit to or from the purchaser.
4. If at any time during the guarantee period any part or parts of the product are replaced
with a part or parts not supplied or approved by us or of an objective quality safe and
suitable for the product, or the product has been dismantled or repaired by any person not
authorised by us, we shall have the right to terminate this guarantee in whole or in part
immediately without further notice.
5. The purchaser’s sole and exclusive remedy under this guarantee against us is for the
repair or replacement of the product or any defective part or parts and no other remedy,
including, but not limited to, incidental or consequential damage or loss of whatsoever
nature shall be available to the purchaser.
6. This guarantee shall not apply to batteries and any other items of limited natural life.
7. Our decision on all matters relating to complaints shall be final. Any product or defective
part which has been replaced shall become our property.
8. The guarantee period applicable to this product shall be 12 months.
Please keep these operating instructions with your receipt.
Panasonic U.K. a branch of Panasonic Marketing Europe GmbH
Receipt No.
Model No.
Date of purchase
Serial No.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
52
TG68xxE(en)_1225_ver012.pdf
52
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Keytones: 27
M
Making calls: 18
Missed calls: 34
Mute: 19
Index
A
Additional handsets: 31
N
P
Night mode: 29
Noise reduction: 20
Pause: 18
Phonebook: 21
PIN: 31
Power failure: 12
Power on/off: 16
Privacy mode: 27
Redialling: 18
Repeater: 32
Ringer tone: 26
Smart Function Key (NR key): 16
Speakerphone: 18
Speed dial: 23
Alarm: 29
Answering calls: 18
Answering system: 36
Call screening: 36
Erasing messages: 37, 38, 41
Greeting message: 36
Listening to messages: 37, 38, 40
New message alerting: 39
Recording time: 42
Turning on/off: 36
Caller list: 34
Caller list edit: 35
Chain dial: 21
Character entry: 45
Conference calls: 44
R
B
C
Time adjustment: 26
Transferring calls: 44
Troubleshooting: 48
Voice mail: 43
Volume
Receiver: 18
Ringer (Base unit): 26
Ringer (Handset): 19, 26
Speaker: 18
D
E
Direct command code: 24
Display
Contrast: 27
Language: 16
Equalizer: 20
Error messages: 47
F
H
Handset
Deregistration: 32
Locator: 44
Name: 30
Registration: 32
I
Incoming call barring: 30
Intercom: 44
K
Key lock: 20
53
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
54
TG68xxE(en)_1225_ver012.pdf
54
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
55
TG68xxE(en)_1225_ver012.pdf
55
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT!
If your product is not working properly. . .
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the Operating Instructions.
If you still have any problems, please call the Panasonic
DECT Helpline
0844 844 3899 (U.K.)
01289 8333 (Ireland)
or contact us through our website:
Buy online via our eShop: http://shop.panasonic.eu
Sales Department:
Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
© Panasonic System Networks Co., Ltd. 2012
*PNQX5782ZA*
*PNQX5782ZA*
PNQX5782ZA TT1212YK0 (E)
TG68xxE(en)_1225_ver012.pdf
56
2012/12/25
16:30:14
Download from Www.Somanuals.com. All Manuals Search And Download.
|