Operating Instructions
Digital Cordless Answering System
Model No.
KX-TG2721AL
KX-TG2722AL
Model shown is KX-TG2721.
Before initial use, see “Getting Started”
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Please access our online customer survey:
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Model composition
Base unit
Part No.
Handset
Series
Model No.
Part No.
Quantity
KX-TG2721
series
KX-TG2721
KX-TG2722
KX-TG2721
KX-TG2721
KX-TGA277
KX-TGA277
1
2
R Intercom calls and the phonebook copy feature are only available for KX-TG2722.
R The suffix (AL) in the following model numbers will be omitted in these instructions:
KX-TG2721AL/KX-TG2722AL
Accessory information
Supplied accessories
Quantity
No. Accessory item/Part number
KX-TG2721
KX-TG2722
A
B
C
D
E
AC adaptor/PNLV226AL
1
1
2
1
–
2
1
4
2
1
*1
Telephone line cord
*2
Rechargeable batteries
*3
Handset cover
Charger
*1 The telephone line cord comes connected with the telephone plug.
*2 See page 4 for replacement battery information.
A
B
C
D
E
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item
Model number
*1
Rechargeable
batteries
HHR-4MVT/2B or HHR-4MRT/2B
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
DECT repeater
KX-A405AL
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
For your safety
R It is advised not to use the equipment at a
refuelling point. Users are reminded to
observe restrictions on the use of radio
equipment in fuel depots, chemical plants
or where blasting operations are in
progress.
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Operating safeguards
Power connection
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall socket, and do not use.
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact an
authorised service centre.
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.88 GHz to 1.90 GHz, and the RF
transmission power is 250 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
R Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
CAUTION
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
Installation and location
R Never install telephone wiring during an
electrical storm.
R Never install telephone line sockets in wet
locations unless the socket is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
R Use caution when installing or modifying
telephone lines.
thunderstorm is coming, we recommend
that you:
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
– Unplug the telephone line cord from the
phone socket.
– Unplug the AC adaptor from the AC
power outlet.
R This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
R No “000” or other calls can be made from
this device during a mains power failure.
R The earpiece on the handset is magnetised
and may retain small metallic objects.
– there is a power failure.
Battery
R We recommend using the batteries noted
on page 4. USE ONLY rechargeable
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Important safety
instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (including a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
General notices
R Please ensure that a separate telephone,
not dependent on local power, is available
for emergency use.
R This equipment will be inoperable when
mains power fails.
R When a failure occurs which results in the
internal parts becoming accessible,
disconnect the power supply cord
immediately and return this unit to an
authorised service centre.
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
R To minimise the possibility of lightning
damage, when you know that a
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
– away from electronic appliances such as
TVs, radios, personal computers,
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
Notice for product disposal, transfer,
or return
R Coverage and voice quality depends on the
local environmental conditions.
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
Information on Disposal in other
Countries outside the European Union
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as radiators, cookers, etc. It
should not be placed in rooms where the
temperature is less than 0 °C or greater
than 40 °C. Damp basements should also
be avoided.
These symbols are only valid in the European
Union. If you wish to discard these items,
please contact your local authorities or dealer
and ask for the correct method of disposal.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Specifications
R Standard:
GAP (Generic Access Profile)
R Frequency range:
1.88 GHz to 1.90 GHz
R RF transmission power:
Approx. 10 mW (average power per
channel)
Routine care
R Power source:
220–240 V AC, 50/60 Hz
R Power consumption:
Base unit:
Standby: Approx. 0.54 W
Maximum: Approx. 2.7 W
Charger:
R Wipe the outer surface of the product
with a soft cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Standby: Approx. 0.1 W
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C, 20 % – 80 % relative air
humidity (dry)
Note:
R Design and specifications are subject to
change without notice.
R The illustrations in these instructions may
vary slightly from the actual product.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Battery installation
Setting up
R USE ONLY Ni-MH batteries AAA (R03)
size.
Connections
R Use only the supplied Panasonic AC
adaptor PNLV226AL.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
,
).
R When mounting the unit on a wall, see
page 39.
n Base unit
Press plug firmly.
“Click”
Rechargeable Ni-MH ONLY
Hook
To power outlet
Use only the supplied
telephone line cord.
To socket
“Click”
Battery charging
DSL/ADSL filter*
Charge for about 7 hours.
Correct
Incorrect
R When the batteries are fully charged,
“Fully charged” is displayed.
Confirm “Charging” is displayed.
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
n Charger
Hooks
To power outlet
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Battery level
Icon
Note when setting up
Battery level
Note for connections
High
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
Medium
Low
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Needs charging.
Panasonic Ni-MH battery
performance (supplied batteries)
R The unit is not designed to be used with
rotary/pulse dialling services.
Operation
Operating time
In continuous use
20 hours max.
During a power failure
Not in use (standby) 170 hours max.
The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
socket using a telephone double adaptor.
Note:
R It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge (use).
R Actual battery performance depends on
usage and ambient environment.
R Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
R The battery level may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and let it charge for at least
7 hours.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 6.
R Wipe the battery ends (
,
) with a dry
cloth.
R Avoid touching the battery ends (
,
) or
the unit contacts.
Note for battery charging
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
MR/ECON
R: Recall/Flash
Controls
ECO: Eco mode shortcut key
N (Off/Power)
Handset
M
Microphone
Charge contacts
F
Navigator key
–
–
MDN, MCN, MFN, or MEN: Scroll through various
lists and items.
(Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking.
MFN ( : Caller list): View the caller list.
MEN (T: Redial): View the redial list.
G
H
–
–
A
I
B
Base unit
J
K
C
D
A
B
C
D
E
E
L
M
F
G
H
I
A
MjN/MkN (Volume up/down)
M
M
N (Erase)
Speaker
N (Play)
M
M
M
N (Phonebook/Clear)
N (Speakerphone)
N (Talk)
Message indicator
Charge contacts
Speaker
Dial keypad
Receiver
Display
M
N/M N (Repeat/Skip)
MnN (Stop)
M
M
N (Locator)
N (Answer on)
M
M
N (Menu/OK)
N (Mute/Pause)
Answer on indicator
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Display
Turning the power on/off
Handset display items
Power on
Press M
N for about 1 second.
Item
Meaning
Range status: The more
bars visible, the closer the
handset is to the base unit.
Power off
Press M
N for about 2 seconds.
R When
is flashing:
Handset is searching
for base unit.
(page 35)
Initial settings
Handset is accessing base
Symbol meaning:
*1
Example: MbN: “Off”
Press MCN or MDN to select the words in
quotations.
changing base unit
settings, etc.).
Handset is on an outside
call.
R When flashing slowly:
The call is put on hold.
R When flashing rapidly:
An incoming call is now
being received.
Display language
1
2
3
4
5
M
N
MbN: “Handset Setup” a M
MbN: “Display Setup” a M
MbN: “Select Language” a M
MbN: Select your desired language. a
N
N
ECO
The base unit transmission
power is set to “Low”.
(page 13)
N
Answering system is on.
(page 24)
M
N a M
N
Note:
R If you select a language you cannot read:
Battery level
M
N a M
N a MDN 3 times a
Alarm is on. (page 20)
M
N a MCN 3 times a M
N 2
*1
[P]
Privacy mode is on.
(page 19)
times a MbN: Select your desired
language. a M
N a M
N
New voice mail message
received. (page 30)
*2
Date and time
[IN USE]
R Someone is using the
line.
R Answering system is
*1
1
2
3
4
M
N
MbN: “Handset Setup” a M
N
being used by:
– another handset
*1
MbN: “Set Date & Time” a M
N
– the base unit.
Enter the current date, month, and year.
Example: 15 July, 2012
*1 KX-TG2722
*2 Voice mail subscribers only
15 07 12
5
Enter the current hour and minute.
Example: 9:30
09 30
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
6
M
N a M
N
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
One touch eco mode
The MR/ECON button on the handset enables
you to activate the eco function with one touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to
90 % in standby mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
“Normal”.
– When the one touch eco mode is on: “Low”
is temporarily displayed and “ECO” is
shown on the handset display.
– When the one touch eco mode is off:
“Normal” is temporarily displayed and
“ECO” goes off from the handset display.
Note:
R When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
(KX-TG2722)
R Activating one touch eco mode reduces the
range of the base unit in standby mode.
R If you set the repeater mode to “On” (page
21), one touch eco mode is cancelled.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 16).
number “0” when making outside calls with a
PBX:
Making calls
1
Lift the handset and dial the phone
number.
R To correct a digit, press M
N.
1
2
0 a M
N
2
3
M
N
Dial the phone number. a M
N
When you finish talking, press M
place the handset on the base unit or
charger.
N or
Note:
R A 3 second pause is inserted each time
N is pressed.
M
Using the speakerphone
1
Dial the phone number and press M N.
R Speak alternately with the other party.
When you finish talking, press M N.
Answering calls
2
Note:
1
Lift the handset and press M
when the unit rings.
N or M
N
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press M N/
M
N.
2
When you finish talking, press M
place the handset on the base unit or
charger.
N or
Adjusting the receiver or speaker
volume
Auto talk
Press MDN or MCN repeatedly while talking.
You can answer calls simply by lifting the
handset off the base unit or charger. You do
Making a call using the redial list
not need to press M
N. To turn this feature
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
on, see page 19.
1
2
3
MEN (T)
Adjusting the handset ringer volume
MbN: Select the desired phone number.
n While the handset is ringing for an
incoming call:
Lift the handset and press MDN or MCN
repeatedly to select the desired volume.
M
N
Erasing a number in the redial list
n Programming the volume beforehand:
1
2
MEN (T)
1
2
3
4
5
6
M
N
MbN: Select the desired phone number.
a M
M N: “Handset Setup” a M
M N: “Ringer Setup” a M
M N: “Ringer Volume” a M
MbN: Select the desired volume.
N
N
N 2 times
N
3
MbN: “Yes” a M
N a M
N
Pause (for PBX/long distance service
users)
M
N a M
N
A pause is sometimes required when making
calls using a PBX or long distance service.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
Call share
Temporary handset ringer off
While the handset is ringing for a call, you can
turn the ringer off temporarily by pressing
Available for:
KX-TG2722
M
N.
You can join an existing outside call.
To join the conversation, press M
N when
the other handset is on an outside call.
Useful features during a
call
Note:
R To prevent other users from joining your
conversations with outside callers, turn the
privacy mode on (page 19).
Hold
This feature allows you to put an outside call
on hold.
1
2
3
Press M
N during an outside call.
MbN: “Hold” a M
N
To release hold, press M
R Another handset user can take the call
by pressing M N. (KX-TG2722)
N.
Note:
R If a call is kept on hold for more than 9
minutes, the call rings at your handset
again. After 1 additional minute on hold, the
call is disconnected.
R If another phone is connected to the same
line, you can also take the call by lifting its
handset.
Mute
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
1
2
Press M
To return to the conversation, press
N again.
N during conversation.
M
Recall/flash
MR/ECON allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the recall/flash time, see
page 19.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
R If there is no entry corresponding to
the character you selected, the next
entry is displayed.
MbN: Scroll through the phonebook if
necessary.
Handset phonebook
The phonebook allows you to make calls
without having to dial manually. You can add
50 names and phone numbers.
3
4
M
N
Adding entries
Editing entries
1
2
3
M
N a M
MbN: “New Entry” a M
Enter the party’s name (16 characters
max.). a M
R You can change the character entry
mode by pressing M N (page 32).
Enter the party’s phone number (24 digits
N
1
Find the desired entry (page 16). a
N
M
N
2
3
MbN: “Edit” a M
Edit the name if necessary (16 characters
max.; page 32). a M
Edit the phone number if necessary (24
N
N
N
4
4
5
digits max.). a M
N
max.). a M
N
5
6
MbN: “Save” a M
N
MbN: “Save” a M
R To add other entries, repeat from step
N
M
N
3.
6
M
N
Erasing entries
1
Find the desired entry (page 16). a
Finding and calling from a
phonebook entry
M
N
2
3
MbN: “Erase” a M
N
MbN: “Yes” a M
N a M
N
Scrolling through all entries
1
2
M
N
MbN: Select the desired entry.
R You can scroll through the phonebook
entry by pressing and holding MCN or
MDN.
Copying phonebook
entries
3
M
N
Available for:
KX-TG2722
Searching by first character
You can copy phonebook entries between 2
handsets.
1
M
N
R Change the character entry mode if
necessary:
Copying an entry
M
N a MbN: Select the character
1
2
Find the desired entry (page 16). a
entry mode. a M
N
M
N
2
Press the dial key (0 to 9) which
contains the character you are searching
for (page 32).
MbN: “Copy” a M
N
display the first entry corresponding to
each character located on that dial key.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
3
4
Enter the handset number you wish to
send the phonebook entry to.
R When an entry has been copied,
“Completed” is displayed.
R To continue copying another entry:
MbN: “Yes” a M
N a MbN:
Select the desired entry. a M
N
M
N
Copying all entries
1
2
3
M
N a M
N
MbN: “Copy All” a M
N
Enter the handset number you wish to
send the phonebook entry to.
R When all entries have been copied,
“Completed” is displayed.
4
M
N
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Programmable settings
You can customise the unit by programming the following features using the handset.
Scrolling through the display menus
1
2
3
M
N
Press MCN or MDN to select the desired main menu. a M
N
Press MCN or MDN to select the desired item in sub-menu 1. a M
N
R In some cases, you may need to select from sub-menu 2. a M
Press MCN or MDN to select the desired setting. a M
R This step may vary depending on the feature being programmed.
R To exit the operation, press M N.
Note:
R In the following table, < > indicates the default settings.
R In the following table, indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
N
4
N
Main menu
Sub-menu 1
Sub-menu 2
Caller List
Answer System
–
–
23
26
26
26
25
Play New Msg.
Play All Msg.
Erase All Msg.
Greeting
–
–
*1
–
*1
Start REC
(Record greeting)
Play Greeting
25
25
*1
Default
(Reset to pre-recorded
greeting)
*1
Settings
27
28
Remote Code
*1
Number of Rings
<5 Rings>
*1
28
24
Recording Time
<3 Minutes>
Call Screening
<On>
*1
–
–
–
24
24
31
Answer On
*1
Answer Off
*2
–
Intercom
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
Main menu
Sub-menu 1
Sub-menu 2
Ph.Book Setup
New Entry
–
16
17
12
20
*2
–
–
–
Copy All
*1
Handset Setup
Set Date & Time
Alarm
<Off>
Ringer Setup
Display Setup
Register H.set
Ringer Volume
<Level 6>
14
–
*3, *4
Ringtone
<Ringtone 1>
Select Language
<English>
12
–
Contrast
<Level 3>
–
–
38
–
*5
Keytones
<On>
*6
–
–
–
–
14
–
Auto Talk
<Off>
*1
Ringer Volume
Base Unit Setup
<Level 3>
*7
–
First Ring
<On>
*8
15
Recall/Flash
<100 msec.>
Area Code
–
–
20
–
*2, *9
Privacy Mode
<Off>
Base Unit PIN
–
–
38
21
Repeater Mode
<Off>
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset. (KX-TG2722)
*2 KX-TG2722
*3 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*4 The preset melodies in this product are used with permission of © 2011 Copyrights Vision
Inc.
*5 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*7 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings two times or more by default, which
depends on your service provider/telephone company.
*8 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
You can access your service provider/telephone company “call waiting” service by having
the recall/flash time set at “100 msec.”, and then follow your service provider/telephone
company “call waiting” instructions to operate this service.
*9 To prevent other users from joining your conversations with outside callers, turn this feature
on.
7
MbN: Select the desired alarm tone. a
M
N
Special programming
R We recommend selecting a different
ringer tone from the one used for
outside calls.
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
8
M
N a M
R When the alarm is set,
Note:
R To stop the alarm, lift the handset and
press M N or place the handset on the
N
is displayed.
Important:
R Set the date and time beforehand
(page 12).
base unit or charger.
1
2
3
4
M
N
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
MbN: “Handset Setup” a M
MbN: “Alarm” a M
MbN: Select the desired alarm option. a
N
N
Storing an area code to be
deleted automatically
M
N
“Off”
In some situations, phone numbers stored
automatically in the caller list (page 23) will
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
“123”. If you make a call from the caller list to
the phone number “123-456-7890”, the unit
dials “456-7890”.
Turns alarm off. Go to step 8.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 6.
5
6
Enter the desired date and month.
1
2
3
M
N
Set the desired time. a M
N
MbN: “Base Unit Setup” a M
N
MbN: “Area Code” a M
N
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming
4
Enter an area code (5 digits max.). a
N a M
2
3
DECT repeater:
Connect the AC adaptor, then wait until
M
N
the
indicator and
indicator light
green.
Increasing the range of the base
unit
Base unit:
To exit the registration mode, press M N.
R The registration tone stops.
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1
2
3
4
M
N
MbN: “Base Unit Setup” a M
MbN: “Repeater Mode” a M
MbN: Select the desired setting. a
N
N
M
N a M
N
Note:
R After turning the repeater mode on or off,
may flash on the handset momentarily.
This is normal and the handset can be used
once stops flashing.
Registering the DECT repeater
(KX-A405AL) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1
Base unit:
Press and hold M N for about 5 seconds,
until the registration tone sounds.
R The next step must be completed
within 90 seconds.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Service
Phonebook name display
Using Caller ID service
Important:
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
R This unit is Caller ID compatible. To use
Caller ID features (such as displaying caller
phone numbers), you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
Call waiting and Caller ID
compatible
If you subscribe to Caller ID service, your
handset displays the 2nd caller’s information
while talking. After you hear a call waiting
tone, the caller’s phone number will be
displayed.
You can answer the 2nd call, keeping the 1st
call on hold. Follow your service provider/
telephone company instructions using
MR/ECON. (Recall/flash function)
R If the phone number is stored in the
phonebook with its name, the caller’s name
will also be displayed.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– “Out of Area”: The caller dials from
an area which does not provide a Caller
ID service.
– “Private Caller”: The caller
requests not to send caller information.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
R Please contact your service provider/
telephone company for details and
availability in your area.
For Caller ID Type II users
Missed calls
When you receive a 2nd call during a
conversation, you will hear a signal tone
following the call waiting tone and the
conversation will be interrupted or muted
for a short period of time. This is not a fault
of the product as these events are normal.
R The tones are generated by your service
provider/telephone company.
If a call is not answered, the unit treats it as a
missed call and “Missed Call” is displayed.
This lets you know if you should view the
caller list to see who called while you were
away.
Even if only one missed call in the caller list is
viewed (page 23), “Missed Call”
disappears from the display. When you
receive another new call, “Missed Call” is
displayed again.
Caller list
Important:
Note:
R Even when there are unviewed missed
calls, “Missed Call” disappears from the
standby display if the following operation is
performed by one of the registered
handsets:
R Only 1 person can access the caller list at a
time.
R Make sure the unit’s date and time setting
is correct (page 12).
– Being replaced on the base unit or
charger.
– Pressing M
N.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Service
2
MbN: Select the desired entry. a
Viewing the caller list and calling
back
M
N
3
4
MbN: “Add Phonebook” a M
N
1
2
MFN (
)
To store the name, continue from step 3,
“Adding entries”, page 16.
Press MCN to search from the most recent
call, or press MDN to search from the
oldest call.
3
To call back, press M
To exit, press M
N.
N.
Note:
R If the entry has already been viewed or
answered, “ ” is displayed, even if it was
viewed or answered using another handset.
R If you do not want to dial the area code
when making calls from the caller list, you
can store the area code which you want the
unit to delete automatically (page 20).
Editing a caller’s phone number
before calling back
1
2
MFN (
)
MbN: Select the desired entry. a
M
N
3
4
MbN: “Edit and Call” a M
N
Edit the number.
R Press dial key (0 to 9) to add,
M
N to delete.
5
M
N
Erasing caller information
1
2
MFN (
)
MbN: Select the desired entry. a
M
N
3
4
MbN: “Erase” or “Erase All” a
M
N
MbN: “Yes” a M
N a M
N
Storing caller information to the
phonebook
1
MFN (
)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
Answering system
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
Turning the answering
system on/off
The answering system is preset to on.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting Only” as the recording
time setting (page 28).
Base unit
Press M
N to turn on/off the answering
system.
R When the answering system is turned on,
the answer on indicator lights up.
Important:
R Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
R When callers leave messages, the unit
records the day and time of each message.
Make sure the date and time have been set
correctly (page 12).
Handset
1
2
3
M
N
MbN: “Answer System” a M
MbN: Select “Answer On” or “Answer
Off”. a M N a M
Note:
N
N
Memory capacity (including your
greeting message)
R When the answering system is turned on,
is displayed.
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
Call screening
While a caller is leaving a message, you can
listen to the call through the handset’s
Note:
R When message memory becomes full:
– “Messages Full” is shown on the
handset display.
speaker. To adjust the speaker volume, press
MDN or MCN repeatedly. You can answer the call
by pressing M
N on the handset. Call
– The answer on indicator on the base unit
flashes rapidly if the answering system is
turned on.
– “Messages” and the total number of
new messages are not displayed on the
handset even if the answering system is
turned on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
screening can be set for each handset. The
default setting is “On”.
1
2
3
4
5
M
N
MbN: “Answer System” a M
MbN: “Settings” a M
N
N
MbN: “Call Screening” a M
N
MbN: Select the desired setting. a
N a M
M
N
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
Recording your greeting message Playing back the greeting
message
1
2
3
4
5
6
M
N
1
2
3
4
5
M
N
MbN: “Answer System” a M
MbN: “Greeting” a M
N
MbN: “Answer System” a M
MbN: “Greeting” a M
N
N
N
N
MbN: “Start REC” a M
N
MbN: “Play Greeting” a M
MbN: “Yes” a M
N
M
N
After a beep sounds, hold the handset
about 20 cm away and speak clearly into
the microphone (2 minutes and 30
seconds max.).
Listening to messages
using the base unit
7
8
Press M
N to stop recording.
M
N
When new messages have been recorded,
N on the base unit flashes.
Press M N.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
M
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
– If the message recording time (page 28)
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
Operating the answering system
during playback
Key
Operation
MjN or MkN
Adjust the speaker volume
*1
M
N
N
Repeat message
M
Skip message
Stop playback
Resetting to a pre-recorded greeting
message
MnN
Erase currently playing
message
M
N
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
1
2
3
4
5
M
N
MbN: “Answer System” a M
MbN: “Greeting” a M
MbN: “Default” a M
N
Erasing all messages
N
N 2 times
Press M N 2 times while the unit is not in use.
M
N
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
Key
Operation
*5
*6
Erase all messages
Listening to messages
using the handset
When new messages have been recorded,
“Messages” is displayed on the handset with
the total number of new messages.
Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
1
2
3
M
N
*2 To resume playback:
MbN: “Answer System” a M
N
MbN: “Play” a M
N
MbN: Select “Play New Msg.” or “Play
All Msg.”. a M
N
Calling back (Caller ID
subscribers only)
If caller information is received for the call, you
can call the caller back while listening to a
message.
4
When finished, press M
N.
Note:
R To switch to the receiver, press M
N.
1
2
Press M
N during playback.
Operating the answering system
MbN: “Call Back” a M
N
M
M
N a MbN: “Answer System” a
N
Editingthe numberbeforecallingback
Key
Operation
1
2
3
Press M
MbN: “Edit and Call” a M
Edit the number. a M
N during playback.
MDN or MCN
Adjust the receiver or
speaker volume
(during playback)
N
N
1 or MFN
2 or MEN
3
Repeat message
(during playback)
*1
Erasing all messages
Skip message
(during playback)
1
2
3
4
M
N
Enter the “Settings”
menu
MbN: “Answer System” a M
N
MbN: “Erase All Msg.” a M
N
4
Play new messages
Play all messages
MbN: “Yes” a M
N a M
N
5
6
Play greeting message
Record greeting message
76
8
Remote operation
Turn answering system
on
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
*2
M
N
Pause message
9
Stop recording
Stop playback
0
Turn answering system
off
*4
Erase currently playing
message
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
Note:
Remote access code
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorised
parties from listening to your messages
remotely.
Remote commands
Important:
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
R In order to operate the answering system
remotely, you must first set a remote
access code.
Key
Operation
1
2
3
4
5
M
N
1
Repeat message
(during playback)
MbN: “Answer System” a M
MbN: “Settings” a M
N
*1
N
2
Skip message
(during playback)
MbN: “Remote Code” a M
N
4
5
6
7
9
Play new messages
Play all messages
To turn on remote operation, enter the
desired 3-digit remote access code.
6
M
N a M
N
Play greeting message
Record greeting message
Deactivating remote operation
Stop recording
Stop playback
Press * in step 5 on “Remote access code”,
page 27.
0
Turn answering system off
*4
Erase currently playing
message
Using the answering system
remotely
*5
*6
Erase all messages
Reset to a pre-recorded
greeting message (during
greeting message playback)
1
2
3
Dial your phone number from a
touch-tone phone.
*#
End remote operation
(or hang up)
After the greeting message starts, enter
your remote access code.
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 27).
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
4
When finished, hang up.
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
Voice guidance
During remote operation, the unit’s voice
guidance starts and prompts you to press 1
to perform a specific operation, or press 2 to
listen to more available operations.
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
R A long beep is heard.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
will be notified that you have messages on
your voice mail.
To use this service, you will be required to
leave your answering machine off on your
unit.
3
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 26).
This will allow the voice mail to receive any
messages.
R To use the unit’s answering machine rather
than the voice mail service provided by
your service provider/telephone company,
please contact your service provider/
telephone company to have it removed or
deactivated permanently or temporarily.
Alternatively you can leave this service
connected and change the “Number of
Rings” to a shorter duration on your unit
so your unit’s answering machine can pick
up the call prior to the voice mail provided
by your service provider/telephone
company.
Answering system settings
Number of rings before the unit
answers a call
You can change the number of times the
phone rings “Number of Rings” before the
unit answers a call. You can select 2 to 9
rings, or “Auto”.
The default setting is “5 Rings”.
“Auto”: The unit’s answering system answers
at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 27), you
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is “3 Minutes”.
1
2
3
4
5
M
N
MbN: “Answer System” a M
MbN: “Settings” a M
N
1
2
3
4
5
M
N
N
MbN: “Answer System” a M
N
MbN: “Recording Time” a M
N
MbN: “Settings” a M
N
MbN: Select the desired setting. a
N a M
M
N
MbN: “Number of Rings” a M
N
MbN: Select the desired setting. a
M
N a M
N
Selecting “Greeting Only”
You can select “Greeting Only” which sets
the unit to announce a greeting message to
callers but not record messages.
Select “Greeting Only” in step 5 on
“Caller’s recording time”, page 28.
For service provider voice mail
subscribers
To receive voice mail and use the answering
system properly, please note the following:
R “Voice mail” is a service provided by your
service provider/telephone company
Note:
R When you select “Greeting Only”:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
(page 30). You will need to first subscribe
provider/telephone company. Contact your
service provider/telephone company on
how to operate this service and how you
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 25).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Mail Service
Voice mail service
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone.
When you have new messages,
is
displayed on the handset if message
indication service is available. Please contact
your service provider/telephone company for
details of this service.
Important:
R If
still remains on the display even
after you have listened to new messages,
turn it off by pressing and holding # for 2
seconds.
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 24).
For details, see page 28.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom/Locator
Intercom
Transferring calls,
conference calls
Available for:
KX-TG2722
Available for:
KX-TG2722
Intercom calls can be made between
handsets.
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
Note:
R When paging the handset, the paged
handset beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones. To
1
2
During an outside call, press M
N.
MbN: “Intercom” a M
N
R
flashes to indicate the outside call
is on hold.
answer the call, press M
N.
N, then press
M
3
4
Enter the desired handset number you
want to transfer to.
Making an intercom call
Wait for the paged party to answer.
R If the paged party does not answer,
1
2
3
M
N
press M
To complete the transfer:
Press M N.
N to return to the outside call.
MbN: “Intercom” a M
N
5
To page a specific handset, enter the
handset number.
R The outside call is being routed to the
destination unit.
R To stop paging, press M
N.
To establish a conference call:
Press 3.
4
When you finish talking, press M
N.
R To leave the conference, press
Answering an intercom call
M
N. The other 2 parties can
continue the conversation.
R To put the outside call on hold, press
M
M
1
2
Press M
N to answer the page.
When you finish talking, press M
N.
N. a MbN: “Hold” a
N
To resume the conference, press 3.
Handset locator
You can locate a misplaced handset by
paging it.
Answering a transferred call
Press M
N to answer the page.
1
Base unit: Press M N.
R All registered handsets beep for 1
minute.
2
To stop paging:
Base unit: Press M N.
Handset: Press M
N.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode
(page 32).
– Press dial keys to enter characters and numbers.
– Press M
N to erase the character or number highlighted by the cursor. Press and hold
M
N to erase all characters or numbers.
– Press * (Aaa) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press MEN to move the cursor to the
next space, then press the appropriate dial key.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek (
),
Extended 1 ( ), Extended 2 ( ), and Cyrillic ( ). When in these entry modes except
Numeric, you can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
M
N a MbN: Select a character entry mode. a M
N
Note:
R
in the following tables represents a single space.
Alphabet character table (ABC)
Numeric entry table (0-9)
Greek character table (
)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Extended 1 character table (
)
R The following are used for both uppercase and lowercase:
Extended 2 character table (
)
R The following are used for both uppercase and lowercase:
Cyrillic character table (
)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Error messages
Display message
Error
Cause/solution
R Recording was too short. Try again.
Failed
R Phonebook copy failed (page 16). Confirm the other handset
Incomplete
R The receiver’s phonebook memory is full. Erase the unwanted
phonebook entries from the other handset (the receiver) and
try again.
Memory Full
R The phonebook memory is full. Erase unwanted entries
(page 16).
Messages Full
R Message memory is full. Erase unwanted messages
(page 25, 26).
No link to base.
Reconnect AC
adaptor.
R The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been cancelled.
Re-register the handset (page 38).
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor and turn off the handset, then reconnect the base unit’s AC adaptor and turn on the
handset.
General use
Problem
Cause/solution
The handset does not turn R Place the handset on the base unit or charger to turn on the
on even after installing
charged batteries.
handset.
The unit does not work.
R Make sure the batteries are installed correctly (page 9).
R Fully charge the batteries (page 9).
off the handset. Reconnect the adaptor, turn on the handset
and try again.
R The handset has not been registered to the base unit.
Register the handset (page 38).
The handset display is
blank.
R The handset is not turned on. Turn the power on (page 12).
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Problem
Cause/solution
I cannot hear a dial tone.
R Make sure that you are using the supplied telephone line cord.
Your old telephone line cord may have a different wiring
configuration.
R The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the base unit from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel to
have the unit repaired. If the working telephone does not
operate properly, contact your service provider/telephone
company.
I cannot use the intercom
or phonebook copy feature.
R These features are available between the handsets. Although
the handset displays “Intercom”, “Copy All”, or “Copy”,
these features are not available for single handset models.
Programmable settings
Problem
Cause/solution
The display is in a
R Change the display language (page 12).
language I cannot read.
I cannot activate the eco
mode.
R You cannot set eco mode when you set the repeater mode
“On”. If required, set the repeater mode to “Off” (page 21).
Battery recharge
Problem
Cause/solution
The handset beeps and/or R Battery charge is low. Fully charge the batteries (page 9).
flashes.
I fully charged the
batteries, but
R Clean the battery ends (
a dry cloth and charge again.
R It is time to replace the batteries (page 9).
,
) and the charge contacts with
–
still flashes or
– the operating time
seems to be shorter.
Making/answering calls, intercom
Problem
is flashing.
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 38).
unit in standby mode. If required, turn eco mode off (page 13).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Problem
Cause/solution
Noise is heard, sound cuts R You are using the handset or base unit in an area with high
in and out.
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
filter (contact your DSL/ADSL service provider) to the
telephone line between the base unit and the telephone line
socket. Contact your DSL/ADSL provider for details.
The handset does not ring. R The ringer volume is turned off. Adjust ringer volume
(page 14).
The base unit does not
ring.
R The ringer volume is turned off. Adjust ringer volume
(page 19).
I cannot make a call.
R The unit is not designed to be used with rotary/pulse dialling
services.
Caller ID
Problem
Cause/solution
Caller information is not
displayed.
R You must subscribe to a Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall
socket.
R If you use a DSL/ADSL service, we recommend connecting a
filter (contact your DSL/ADSL service provider) to the
telephone line between the base unit and the telephone line
socket. Contact your DSL/ADSL provider for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
Caller information is slow
to display.
R Depending on your service provider/telephone company, the
unit may display the caller’s information at the 2nd ring or
later. Set the first ring to “Off” (page 19).
R Move closer to the base unit.
The name stored in the
phonebook is not fully
displayed while an outside
call is being received.
R Edit the phonebook entry name to fit in 1 line of text (page 16).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Answering system
Problem
Cause/solution
The unit does not record
new messages.
R The answering system is turned off. Turn it on (page 24).
(page 25).
setting (page 28).
recorded by your service provider/telephone company, not
your telephone. Change the unit’s number of rings setting or
contact your service provider/telephone company (page 28).
I cannot operate the
answering system
remotely.
R The remote access code is not set. Set the remote access
code (page 27).
forgotten your remote access code, enter the remote access
code setting to check your current code (page 27).
Liquid damage
Problem
Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the
unit does not work properly, contact an authorised service
centre.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Registering a handset to the base unit
1
Handset:
M
N
2
3
4
MbN: “Handset Setup” a M
MbN: “Register H.set” a M
Base unit:
Press and hold M N for about 5 seconds, until the registration tone sounds.
R If all registered handsets start ringing, press M N again to stop, then repeat this step.
(KX-TG2722)
N
N
R The next step must be completed within 90 seconds.
5
Handset:
Wait until “Enter Base PIN” is displayed. a Enter the base unit PIN (default: “0000”).
a M
R If you forget your PIN, contact an authorised service centre.
R When the handset has been registered successfully, stops flashing.
N
Deregistering a handset
1
2
3
M
N
MbN: “Base Unit Setup” a M
335 a M
R All handsets registered to the base unit are displayed.
N
N
4
5
Enter the desired handset number you want to cancel. a M
N
MbN: “Yes” a M
N
R A confirmation tone sounds.
R The handset does not beep when cancelling its own registration.
6
M
N
Changing the base unit PIN (Personal Identification Number)
Important:
R If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to
you. If you forget your PIN, contact an authorised service centre.
1
2
3
4
5
M
N
MbN: “Base Unit Setup” a M
N
MbN: “Base Unit PIN” a M
N
Enter the current 4-digit base unit PIN (default: “0000”).
Enter the new 4-digit base unit PIN. a M N a M
N
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Wall mounting
Note:
R Make sure that the wall and the fixing method are strong enough to support the weight of the
unit.
R Drive the screws (not supplied) into the wall.
n Base unit
n Charger
50 mm
Screws
25 mm
Screws
Hooks
Hook
Space
(5 mm)
Space
Longer than
(6 mm)
20 mm
Longer than
20 mm
Wall mounting template
n Base unit
n Charger
25 mm
50 mm
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Redialling: 14
Repeater: 21
Speakerphone: 14
Transferring calls: 31
Index
S
T
A
Alarm: 20
Troubleshooting: 34
Voice mail: 30
Volume
Greeting only: 28
Number of rings: 28
Remote operation: 26
Area code: 20
V
Receiver: 14
Speaker: 14
W
Wall mounting: 39
B
C
Battery: 9, 10
Call share: 15
Caller ID service: 22
Caller list: 22
D
E
Date and time: 12
Display
Contrast: 19
Language: 12
Eco mode: 13
F
First ring: 19
H
Handset
Deregistration: 38
Locator: 31
Hold: 15
I
Intercom: 31
K
M
Keytones: 19
Making calls: 14
Mute: 15
P
Pause: 14
PIN: 38
R
Recall/flash: 15
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
43
Download from Www.Somanuals.com. All Manuals Search And Download.
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
Customer Care Centre Tel. No.: 132600
N52
Sales Department:
1 Innovation Road, Macquarie Park NSW 2113, Australia
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
© Panasonic System Networks Co., Ltd. 2012
*PNQX5404ZA*
*PNQX5404ZA*
PNQX5404ZA TT0912MU0 (A)
Download from Www.Somanuals.com. All Manuals Search And Download.
|