14-1120.fm Page 1 Wednesday, January 19, 2000 4:27 PM
Cat. No. 14-1120
OWNER’S MANUAL
Please read before using this equipment.
CTR-114
Auto Reverse
Voice-Activated
Cassette Recorder
with Two-Speed
Recording
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 3 Wednesday, January 19, 2000 4:27 PM
Playback Speed Control — lets you adjust the play-
back speed of your tape.
Built-in Microphone — lets you make quality re-
cordings without having to use an external micro-
phone.
External Microphone Jack — lets you connect an
optional external microphone for unidirectional re-
cording, reducing background noise.
One-Touch Recording — lets you start recording
with the press of a button.
Cue/Review — lets you listen to recordings at high
speed to help you find a particular section and stop
there.
Mic Sensitivity Switch — lets you select low or high
microphone sensitivity for recording specific sounds,
like a one-on-one interview, or for recording broader
sounds, as in a lecture hall.
Tape Direction Control — lets you change the
tape’s direction at any time without having to eject
the tape and turn it over.
Battery Check Indicators — show you the amount
of power remaining in the batteries.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 4 Wednesday, January 19, 2000 4:27 PM
Tape Counter — helps you quickly find a specific
section on the cassette. It resets with the touch of a
button.
Automatic Level Control — automatically sets the
correct recording level.
Three Power Sources — let you power your cas-
sette recorder from internal batteries (not supplied),
standard AC power (with an optional AC adapter), or
your vehicle’s battery (with an optional DC adapter).
Automatic Shut-Off Mechanism — automatically
shuts off the recorder at the end of the reverse side
of the tape while playing or recording.
We recommend you record the CTR-114’s serial
number here. The number is on the label inside the
cassette compartment.
Serial Number: ___________________________
4
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 5 Wednesday, January 19, 2000 4:27 PM
CONTENTS
Preparation ........................................................... 6
Connecting Power .......................................... 6
Using Battery Power ................................ 6
Using AC Power ...................................... 9
Using Vehicle Battery Power ................. 11
Connecting an Earphone .............................. 13
Listening Safely ..................................... 14
Traffic Safety .......................................... 14
Connecting an External Microphone ............ 15
Attaching the Wrist Strap .............................. 16
Operation ............................................................ 17
Loading a Cassette Tape .............................. 17
Recording ..................................................... 18
Playing a Cassette Tape ............................... 23
Using Fast Forward and Rewind ........... 27
Using the Tape Counter ................................ 28
Tape Tips ...................................................... 29
Erasing Tapes ........................................ 29
Preventing Accidental Erasure .............. 29
Restoring Tape Tension
and Sound Quality ................................. 30
Care and Maintenance ....................................... 31
Cleaning the Tape-Handling Parts ................ 32
Specifications .................................................... 34
5
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 6 Wednesday, January 19, 2000 4:27 PM
PREPARATION
CONNECTING POWER
You can power your CTR-114 from:
• internal batteries
• AC power (with an optional AC adapter)
• vehicle battery power (with an optional DC
adapter)
Note: Connecting an adapter automatically discon-
nects internal batteries.
Using Battery Power
You can power the CTR-114 with two AA batteries
(not supplied). For the best performance and longest
life, we recommend alkaline batteries, such as Ra-
dioShack Cat. No. 23-557.
You can also use rechargeable nickel-cadmium bat-
teries (Cat. No. 23-125). These batteries and a bat-
tery charger (Cat. No. 23-133) are available at your
local RadioShack store.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 7 Wednesday, January 19, 2000 4:27 PM
Cautions:
• Use only fresh batteries of the required size and
recommended type.
• Do not mix old and new batteries, different types
of batteries (standard, alkaline, or recharge-
able), or rechargeable batteries of different
capacities.
Follow these steps to install batteries.
1. Press down and slide the battery compartment
cover in the direction of the arrow, then lift open
the cover.
2. Put the batteries in the compartment as indi-
cated by the polarity symbols (+ and –) marked
outside the compartment.
3. Close the cover.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 8 Wednesday, January 19, 2000 4:27 PM
The CTR-114 has three colored battery indicators
which show how much power is left in the batteries.
The battery indicators light when you press
,
STOP
,
,
or
.
PLAY RECORD
BATTERY
Indicators
Green ➜
F (full)
Orange ➜
M (medium)
Red
L (low)
When the red ( ) battery indicator lights, replace both
L
batteries.
Caution: Always dispose of old batteries promptly
and properly. Do not burn or bury them.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 9 Wednesday, January 19, 2000 4:27 PM
Important: This product is capable of using re-
chargeable nickel-cadmium batteries. At the end of a
nickel cadmium battery’s useful life, it must be recy-
cled or disposed of properly. Contact your local,
county, or state hazardous waste management au-
thorities for information on recycling or disposal pro-
grams in your area. Some options that might be
available are: municipal curbside collection, drop-off
boxes at retailers such as your local RadioShack
store, recycling collection centers, and mail-back
programs.
Using AC Power
To power the cassette recorder from a standard AC
outlet, you need an AC adapter such as Cat. No.
273-1663.
Cautions:
• You must use an AC adapter that supplies at
least 3 volts DC power and delivers at least 400
mA. Its center tip must be set to negative, and its
barrel plug must properly fit the CTR-114’s
DC
jack. The recommended adapter meets these
3V
specifications. Using an adapter that does not
meet these specifications could damage the
cassette recorder or the adapter.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 10 Wednesday, January 19, 2000 4:27 PM
• Be sure you connect the adapter to the cassette
recorder before you plug it into the AC outlet,
and unplug the adapter from the AC outlet
before you unplug it from the cassette recorder.
Follow these steps to connect the cassette recorder
to AC power.
1. Set the adapter’s voltage switch to 3V.
2. Insert the adapter’s 3.4 mm outer diameter/1.3
mm inner diameter barrel plug into the adapter’s
cord, with the tip set to negative.
3. Insert the plug into the cassette recorder’s
jack.
DC 3V
4. Plug the adapter into a standard AC outlet.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 11 Wednesday, January 19, 2000 4:27 PM
Using Vehicle Battery Power
To power the recorder from your vehicle’s battery,
you need a DC adapter, such as Cat. No. 270-1562.
Cautions:
• You must use a DC adapter that supplies at least
3 volts DC power and delivers at least 400 mA.
Its center tip must be set to negative, and its bar-
rel plug must properly fit the recorder’s
DC 3V
jack. The recommended adapter meets these
specifications. Using an adapter that does not
meet these specifications could damage the
recorder.
• Be sure you plug the adapter into the cassette
recorder before you plug it into the cigarette-
lighter socket, and unplug the adapter from the
cigarette-lighter socket before you unplug it from
the cassette recorder.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 12 Wednesday, January 19, 2000 4:27 PM
Follow these steps to power the cassette recorder
from your vehicle’s battery.
1. Set the adapter’s voltage switch to 3V.
2. Insert the adapter’s 3.4 mm outer diameter/1.3
mm inner diameter barrel plug into the adapter’s
cord, with the tip set to negative.
3. Insert the plug into the cassette recorder’s
jack.
DC 3V
4. Plug the other end of the adapter into the vehi-
cle’s cigarette-lighter socket.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 13 Wednesday, January 19, 2000 4:27 PM
CONNECTING AN EARPHONE
1
You can use an optional earphone with a /8-inch
(3.5-mm) plug to listen to a tape in privacy. Insert the
earphone’s plug into the cassette recorder’s
jack.
EAR
Notes:
• You can also use an earphone during recording
to listen to what the recorder is picking up
through the internal or an external microphone.
(See “Recording” on Page 18.)
• Your local RadioShack store carries a wide
selection of earphones.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 14 Wednesday, January 19, 2000 4:27 PM
Listening Safely
To protect your hearing, follow these guidelines
when you use an earphone.
• Rotate the volume to the lowest setting before
you begin listening. After you begin listening,
adjust the volume to a comfortable level.
• Do not listen at extremely high volume levels.
Extended high-volume listening can lead to per-
manent hearing loss.
• Once you set the volume, do not increase it.
Over time, your ears adapt to the volume level,
so a volume level that does not cause discomfort
might still damage your hearing.
Traffic Safety
Do not wear an earphone while operating a motor ve-
hicle or riding a bicycle. This can create a traffic haz-
ard and could be illegal in some areas.
Even though some headphones let you hear some
outside sounds when listening at normal volume lev-
els, they still can present a traffic hazard.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 15 Wednesday, January 19, 2000 4:27 PM
CONNECTING AN EXTERNAL
MICROPHONE
You can connect an external microphone (not sup-
1
plied) with a /8-inch (3.5-mm) plug to the recorder’s
jack. Connecting an external microphone auto-
MIC
matically disconnects the built-in microphone.
Note: Your local RadioShack store sells a variety of
microphones.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 16 Wednesday, January 19, 2000 4:27 PM
ATTACHING THE WRIST STRAP
Attach the supplied wrist strap to the CTR-114 to
make it easier to carry and to reduce the risk of acci-
dentally dropping it.
Thread the strap’s small loop around the metal pin on
the corner of the CTR-114. Then insert the opposite
end of the strap through the slim loop and pull it until
the slim loop tightens around the metal pin.
Hint: If you have difficulty threading the slim loop
around the medal pin, use the end of a straightened
paper clip to hook onto the loop and pull it through.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 17 Wednesday, January 19, 2000 4:27 PM
OPERATION
You can use the recorder to play normal bias, high-
bias, and metal tapes. However, you should only use
normal bias (Type I) tapes for recording. If you record
on metal or high-bias tapes, the recorded sound will
not erase properly.
LOADING A CASSETTE TAPE
1. Take up any slack in the tape by turning the cas-
sette’s hub with a pencil. Do not touch the
exposed tape.
2. Lift open the cassette compartment door.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 18 Wednesday, January 19, 2000 4:27 PM
3. Insert a cassette into the door’s tape guides with
the cassette’s open edge facing up.
4. Close the door.
RECORDING
You can record using the built-in microphone or an
optional external microphone. For the best perfor-
mance, use any normal bias (Type I) tape up to 90
minutes long. We do not recommend 120-minute
tapes because they are thin and can easily tangle.
Notes:
• The ALC (Automatic Level Control) circuit auto-
matically sets the recording level.
• If you set
to
, the cassette
REV
DIRECTION
recorder records on only the reverse side and
stops at the end of that side.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 19 Wednesday, January 19, 2000 4:27 PM
• If you want to record on only one side of a tape,
load the tape so the side you want to record on
faces inside the cassette compartment, set
to
, then start the recording.
REV
DIRECTION
Caution: If you load a cassette with the erase-pro-
tection tabs broken off, do not try to force down
. This can damage the recording mecha-
RECORD
nism. (See “Preventing Accidental Erasure” on
Page 29.)
Follow these steps to record.
1. Load a blank cassette tape, or one you want to
record over, into the cassette compartment.
2. Slide
to
or , depending on
LO HI
MIC SENSITIVITY
the sound source you want to record.
(Low): Select
when the sound source is
LO
LO
near the recorder.
(High): Select when the sound source is far
HI
HI
from the recorder, as in a board room, a semi-
nar, or a lecture hall.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 20 Wednesday, January 19, 2000 4:27 PM
3. To record specific voices without background
interference, slide
to
. The CTR-
ON
VOICE ZOOM
114 cuts off higher and lower frequency signals
(background noise) and enhances the mid-
range.
4. Slide
or to
to
for normal recording,
NORM
REC SPEED
for extended recording (twice the nor-
EXT
mal recording time). At the EXT setting, the
recorder puts the recording in half the space
used during normal speed.
Note: Tapes recorded at the EXT setting can
play only on this recorder or on another recorder
that has the extended recording feature.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 21 Wednesday, January 19, 2000 4:27 PM
5. Set
to
if you want to manually start and
OUT
VOX
stop recording. Or, set
activated recording.
to
to use voice-
IN
VOX
At the VOX setting, recording begins when the
recorder picks up sound and stops a few sec-
onds after the sound stops.
Hint: The voice-activated feature saves power
and tape if there are long or frequent pauses in
the material you are recording.
6. Press
when you want to begin record-
RECORD
ing.
and
automatically lock down.
PLAY
RECORD
21
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 22 Wednesday, January 19, 2000 4:27 PM
If
is set to
, recording begins immedi-
OUT
VOX
ately. If
is set to , recording begins when
IN
VOX
the recorder picks up sound.
Note: To pause recording, slide PAUSE in the
direction of the arrow. To resume recording, slide
to the other position.
PAUSE
7. If you set
to , adjust
to set the
VOX SENS
VOX
IN
sound level at which recording begins. When
you adjust higher, softer sounds start
VOX SENS
VOX recording. When you adjust
VOX SENS
lower, louder sounds start VOX recording.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 23 Wednesday, January 19, 2000 4:27 PM
Notes:
• The CTR-114 records on one side of the tape,
automatically reverses the tape’s direction,
records on the reverse side of the tape, then
automatically stops.
• You can use an earphone (not supplied) to
monitor a recording in progress.
8. To stop recording before it automatically stops,
press
.
STOP
PLAYING A CASSETTE TAPE
1. Switch
to
to play the side of the
FWD
DIRECTION
cassette facing out, or to
facing in.
to play the side
REV
23
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 24 Wednesday, January 19, 2000 4:27 PM
2. Set the auto reverse switch in the cassette com-
partment to either one-time or continuous play-
back.
One-Time Playback: plays one side of
the tape to its end, then automatically reverses
the tape’s playback direction, plays the reverse
side of the tape, then automatically stops.
Notes:
• If you set
to
, the cassette
REV
DIRECTION
recorder plays only the reverse side and stops
at the end of that side.
• If you move
from
to
dur-
FWD
DIRECTION
REV
ing playback, the cassette recorder stops.
Continuous Playback: plays both sides
of the tape continuously until you press
.
STOP
24
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 25 Wednesday, January 19, 2000 4:27 PM
3. Press
. The button locks down and the
PLAY
tape plays.
Note: Slide REC SPEED to NORM for tapes that
have been prerecorded on other recorders or
recorded with the normal record setting on this
recorder. Or slide
to
for tapes
EXT
REC SPEED
that have been recorded with the extended
record setting on this recorder.
4. Turn
toward
to play the
to play it
PLAY BACK SPEED
FAST
tape more quickly or toward
more slowly.
SLOW
25
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 26 Wednesday, January 19, 2000 4:27 PM
5. Adjust
to the desired listening level.
VOLUME
6. To stop the tape, press
.
STOP
Note: To stop play momentarily, slide PAUSE in
the direction of the arrow. Slide
other position to resume play.
to the
PAUSE
26
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 27 Wednesday, January 19, 2000 4:27 PM
Using Fast Forward and Rewind
When the tape is stopped, press
wind or fast-forward it.
or
to re-
To
DIRECTION
rewind,
To fast-
forward,
press
setting
press
FWD
REV
To stop the tape, press
.
STOP
Note: The CTR-114 does not automatically stop
when it reaches the end of the tape. To protect the
tape after the tape has fully wound to either end,
press
to release fast-forward or rewind.
STOP
27
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 28 Wednesday, January 19, 2000 4:27 PM
You can also hold down
or
during play-
back to help you locate a specific portion of the tape
(for example, if you are listening for a particular
speech, statement or other audio cue). While holding
it down, you hear the tape at a faster speed. To re-
turn to normal playback, release the button.
USING THE TAPE COUNTER
You can use the tape counter to note different posi-
tions or locations on your tape during recording or
playback. Before playing a tape, press the tape
counter reset button to set the counter to 000.
During play or recording, the numbers advance to
show the amount of tape that has moved past the
tape heads since the tape began moving. When the
tape rewinds, the numbers decrease.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 29 Wednesday, January 19, 2000 4:27 PM
TAPE TIPS
Erasing Tapes
If you record on a previously recorded tape, you re-
place the old recording with the new one. If you need
to quickly erase an entire tape, you might prefer to
use a bulk eraser (available at your local RadioShack
store).
Note: If you use metal or high-bias type tape, the re-
corded sound may not be erased properly.
Preventing Accidental Erasure
Cassettes have two erase-protection tabs — one for
each side. When a tab is in place, you can record on
that side.
To prevent accidental erasure of a tape recording,
use a screwdriver to remove one or both of the cas-
sette tape’s erase-protection tabs. This prevents
from being pressed.
RECORD
Side A Tab
Side A
29
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 30 Wednesday, January 19, 2000 4:27 PM
If you later decide to record on a tape side after you
have removed its erase-protection tab, place a piece
of strong plastic tape over that side’s erase-protec-
tion hole. Be sure you cover only the hole originally
covered by the erase-protection tab.
Caution: Removing the erase-protection tabs does
not prevent a bulk tape eraser from erasing a cas-
sette tape.
Restoring Tape Tension and Sound
Quality
After you play a cassette tape several times, the tape
might become tightly wound on the reels. This can
cause playback sound quality to deteriorate.
To restore the sound quality, fast-forward the tape
from the beginning to the end of one side, then com-
pletely rewind it. Then loosen the tape reels by gently
tapping each side of the cassette’s outer shell on a
flat surface.
Caution: Be careful not to damage the cassette
when tapping it. Do not touch the exposed tape or al-
low any sharp objects near the cassette.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 31 Wednesday, January 19, 2000 4:27 PM
CARE AND MAINTENANCE
Your Optimus CTR-114 Auto-Reverse Voice-Activat-
ed Cassette Recorder is an example of superior de-
sign and craftsmanship. The following suggestions
will help you care for the cassette recorder so you
can enjoy it for years.
• Keep the recorder dry. If it gets wet, wipe it dry
immediately. Liquids might contain minerals that
can corrode the electronic circuits.
• Use and store the recorder only in normal tem-
perature environments. Temperature extremes
can shorten the life of electronic devices, dam-
age batteries, and distort or melt plastic parts.
• Keep the recorder away from dust and dirt,
which can cause premature wear of parts.
• Handle the recorder gently and carefully. Drop-
ping it can cause the recorder to work improp-
erly.
• Use only fresh batteries of the required size and
recommended type. Batteries can leak chemi-
cals that damage your recorder’s electronic
parts.
• Wipe the recorder with a damp cloth occasion-
ally to keep it looking new. Do not use harsh
chemicals, cleaning solvents, or strong deter-
gents to clean the recorder.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 32 Wednesday, January 19, 2000 4:27 PM
Modifying or tampering with the recorder’s internal
components can cause a malfunction and might in-
validate the recorder’s warranty. If your recorder is
not performing as it should, take it to your local Ra-
dioShack store for assistance.
CLEANING THE TAPE-HANDLING
PARTS
Dirt, dust, or particles of the tape’s coating can accu-
mulate on the tape heads and other parts the tape
touches. This can greatly reduce the performance of
the cassette recorder. After every 20 hours of tape
player operation, use a cassette deck cleaning kit or
follow these steps to clean the tape-handling parts.
1. Remove the batteries and disconnect any other
power source.
2. Open the cassette compartment door.
3. Press
parts.
to expose the tape-handling
PLAY
32
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 33 Wednesday, January 19, 2000 4:27 PM
4. Use a cotton swab dipped in denatured alcohol
or tape head cleaning solution to clean the
record/playback head, pinch rollers, tape guides,
and capstans.
Tape Guides
Erase Heads
Capstans
Record/Playback Head
Pinch Rollers
5. When you finish cleaning, press
and close
STOP
the cassette compartment door. Then reconnect
power.
Your local RadioShack store sells a complete line of
cassette recorder cleaning supplies.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 34 Wednesday, January 19, 2000 4:27 PM
SPECIFICATIONS
CASSETTE DECK
Tape System .............. 2-track, monophonic cassette
Tape Speed ...................................17/8 ips (4.8 cm/s)
Wow and Flutter (WRMS) ................................. 0.2%
Frequency Response (at –3 dB) ..... 250 Hz to 8 kHZ
S/N Ratio ........................................................ 30 dB
Erasing System ................................................... DC
Recording System ....................................... DC Bias
Tape Type ................................ Normal Bias (Type I)
POWER REQUIREMENT
Batteries ............................................ 2 AA Batteries
(Cat. No. 23-557)
AC .................................. 120 Volts with AC Adapter
(Cat. No. 273-1663)
DC .............................. 12 Volts DC with DC Adapter
(Cat. No. 270-1562)
Typical Cassette Playing Time
with AA Alkaline Batteries ................About 16 Hours
w/ Headphones, About 14 Hours w/Speakers
34
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 35 Wednesday, January 19, 2000 4:27 PM
GENERAL
Power Output ............... 15 mW/Channel at 32 ohms
Dimensions (HWD) .............. 41/2 × 35/8 × 11/2 Inches
(112.4 × 89.8 × 37.6 mm)
Weight (without battery) .................................. 7.2 oz
(206 g)
Specifications are typical; individual units might vary.
Specifications are subject to change and improve-
ment without notice.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
14-1120.fm Page 36 Wednesday, January 19, 2000 4:27 PM
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in ma-
terial and workmanship under normal use for ninety (90) days from the date of
purchase from RadioShack company-owned stores and authorized Ra-
dioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DU-
RATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN.
EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY
OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR EN-
TITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DI-
RECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT
OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING,
BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts
or the exclusion of incidental or consequential damages, so the above limita-
tions or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product
and the RadioShack sales receipt as proof of purchase date to any Ra-
dioShack store. RadioShack will, at its option, unless otherwise provided by
law: (a) correct the defect by product repair without charge for parts and labor;
(b) replace the product with one of the same or similar design; or (c) refund the
purchase price. All replaced parts and products, and products on which a re-
fund is made, become the property of RadioShack. New or reconditioned parts
and products may be used in the performance of warranty service. Repaired or
replaced parts and products are warranted for the remainder of the original
warranty period. You will be charged for repair or replacement of the product
made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to
acts of God, abuse, accident, misuse, improper or abnormal usage, failure to
follow instructions, improper installation or maintenance, alteration, lightning or
other incidence of excess voltage or current; (b) any repairs other than those
provided by a RadioShack Authorized Service Facility; (c) consumables such
as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or in-
surance costs; or (f) costs of product removal, installation, set-up service ad-
justment or reinstallation.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite
600, Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
87-HT6-906-01
980620ACK-0-9
8A8N
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|