E
N
G
L
I
E
N
G
L
I
Before Use and Preparations
Name of Controls Functions(Remote Control Unit)
S
H
S
H
Point the remote control unit at the main unit’s sensor. (➡ page 18)
➡ Notes for the touch panel
When operating
1
2
[PWR] (SOURCE)
[RET] (RETURN)
≥You must use your fingers to touch the panel and perform operations.
≥Do not press the buttons too forcefully. If you do so, you may damage or break the glass on the top surface
of the touch panel.
≥Do not allow the top surface of the touch panel to be caught by your fingernails or any hard objects. If you
do so, you may damage or break the glass on the top surface of the touch panel.
≥Do not use a pen or other sharp implement to perform touch panel operations. If you do so, you may dam-
age or break the glass on the top surface of the touch panel.
≥Switches on/off the power. (➡ page 20)
≥Selects a source. (➡ page 20)
[BAND]
≥Returns to the previous display in menu setting
mode.
[MENU]
≥Selects a band. (➡ page 22)
≥Pause CD playing. (➡ page 25)
≥Enters the menu setting mode.
≥Returns to the regular mode during menu play setting.
[FACE]
[" ] [# ] (Hour/minute/disc)
≥Selects (vertically) or adjusts an op-
eration or item.
≥Adjusts the clock. (➡ page 21)
≥Selects disc. (➡ page 28)
[%] [$ ] (Track/tune)
≥Selects (horizontally) or adjusts an
operation or item.
≥Selects or searches frequency/track.
(➡ pages 22, 25, 28)
[SET]
≥Performing operations while the top surface of the touch panel is covered with dust may damage the glass
on the top surface of the touch panel.
≥Selects the button color and display
brightness. (➡ page 33)
[S·A] (Spectrum Analyzer)
≥Selects the Spectrum Analyzer display
pattern. (➡ page 37)
[DISP] (Display)
≥Changes the display.
(➡ pages 22, 25, 29)
SOURCE
PWR
RETURN
BAND
RET
MENU
When not operating
≥Be sure to keep the front panel with the removable face plate case (included) when it has been detached
from the main unit.
≥Take care not to drop the front panel when it has been detached from the main unit. Also take care not to
bump the top surface of the touch panel into anything. If you do so, you may break the glass on the top sur-
face of the touch panel.
FACE
DISP
1
S
•
A
DIMMER
DIM
2
3
4
5
6
RANDOM
SCAN
REPEAT
VOL
7
8
0
9
≥Do not allow the top surface of the touch panel to be caught by your fingernails or any hard objects. If you
do so, you may damage or break the glass on the top surface of the touch panel.
[DIM] (DIMMER)
≥Changes the dimmer level.
(➡ page 37)
MUTE
NUMBER
≥Determines an operation or item.
When cleaning (➡ page 46)
Car Audio
[" ] [# ] VOL (Volume)
≥Adjusts the sound volume.
(➡ page 21)
[„] (NUMBER)
≥Enters the number input mode.
(➡ pages 25, 29)
[MUTE]
≥Lowers the volume. (➡ page 21)
[0] to [9]
≥Memorizes broadcast stations. (➡ page 23)
≥Selects track/disc. (➡ page 25, 29)
[\ ]
(S·HDB)
≥Sets the Super High Definition Bass
[4] (RANDOM)/[5] (SCAN)/[6] (REPEAT)
sound. (➡ page 33)
≥Selects listening item. (➡ pages 26, 30)
Battery Installation
1 Remove the battery holder.
Lithium battery (included)
Back side
Pull the battery holder by the position B while pushing posi-
tion A in the direction indicated by the arrow.
2 Install the battery on the battery holder.
As shown in the figure on the right, fit the battery into the battery
holder with the “i” side facing up while pressing on position A.
3 Insert the battery holder.
Position B
Push the battery holder back into its original position.
Battery Notes
Battery holder
Position A
Remove and dispose of an old battery immediately.
Battery Information: ≥ Battery type: Panasonic lithium battery (CR2025) (included)
≥ Battery life: Approximately 6 months with normal use (at room temperature)
Caution: Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a
fire. Battery leakage may damage the unit.
≥Do not disassemble or short the battery. Do not throw a battery into a fire.
≥Keep batteries away from children to avoid the risk of accidents.
≥Be careful to observe proper local disposal rules when you dispose of batteries.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
General
Clock Basics
S
H
S
H
The 12-hour system is used for the clock.
1 Power
Volume
ACC
ON
Turn the key in the ignition until the accessory indicator lights.
[VOL " ]: Up
5
6
Initial Time
[VOL # ]: Down
∫ Power on
Press the touch panel on the main unit.
Press [PWR] (SOURCE) on the remote control unit.
1 Press
/[DISP] (display).
DISPLAY
Setting range: 0 to 40
(Clock display)
∫ Power off
Note:
2 Press and hold
/[DISP] (display) for
DISPLAY
more than 2 seconds.
Press and hold
on the main unit again for more than
SOURCE
≥The sound level for each source is stored in
memory.
(There is one volume setting for AM radio
band, and one volume setting for FM radio
band.)
SOURCE
1 second.
Press and hold [PWR] (SOURCE) on the remote control unit
again for more than 1 second.
(Hours blink.)
Note:
or
3 Press
4 Press
5 Press
/[" ] or [# ].
≥After turning off the ignition key, a security message is displayed, and the panel removable alarm that
reminds you to take the panel is activated. (When security function is set to on ➡ page 38)
≥Operations can be performed no matter which part of the touch panel is pressed BUT ONLY WHEN
THE POWER IS ON.
Mute/Attenuation
(Hours set.)
on
MUTE
ON: Press
/[
]. (
indicator lights.)
MUTE
OFF: Press MUTE /[
] again.
MUTE
/[DISP] (display).
DISPLAY
Touch panel (Power on)
: No sound.
SOURCE DISPLAY
[OPEN]
(Minutes blink.)
: Decrease the volume to 1/10.
(Power off)
Decreasing volume range depends on setting.
(➡ page 38)
OPEN
or
/[" ] or [# ].
MOSFET
50W
X
4
MENU
VOL
(Minutes set.)
BAND
APM/ ;/
1
6 Press
/[DISP] (display).
DISPLAY
Open/Close the Front Panel
(End.)
[VOL " ] [VOL # ]
(Hour/minute)
OPEN: Press [OPEN] on the front panel.
(Volume)
CLOSE: Raise the panel by hand.
Note:
or
≥Press and hold
/[" ] or [# ] to
2 Source
change numbers rapidly.
≥You can select the clock display during the unit
Press
/(SOURCE) to change the source.
SOURCE
Radio
off. (➡ page 38)
ST
Close
Time Reset
CD player
Press and hold
/[DISP] (display) for more
than 2 seconds to activate the time setting mode to
reset the time. Then, repeat steps 3 to 6.
DISPLAY
[PWR]
(SOURCE)
(When a CD is in the player.)
SOURCE
PWR
RETURN
RET
BAND
MENU
FACE
DISP
1
S
•
A
Caution:
[" ] [# ]
(Hour/minute)
DIMMER
DIM
CD changer control
AUX-IN setting
≥To avoid damaging the front panel, do not push
it down or place objects on it while it is open.
≥Do not pitch your finger or hand in the front
panel.
[DISP]
(Display)
SET
(When a CD changer is
connected and magazine is in
the changer.) ( page 28)
2
3
4
5
6
[" ] [# ]
VOL (Volume)
RANDOM
SCAN
REPEAT
VOL
7
8
0
9
DISPLAY
MUTE
NUMBER
≥Do not insert foreign matter into the disc slot.
[MUTE]
Car Audio
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
Radio
S
H
S
H
1 Radio Mode
Caution:
One-Touch Selection of a Station
≥To ensure safety, never attempt to preset sta-
tions while you are driving.
Press
/[SOURCE] to change to
7
8
SOURCE
the radio mode.
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
SOURCE
1 Select a band and frequency (steps 1, 2 and 3 on the previous
page).
2 Press and hold the Spectrum Analyzer display TUNE for more than
Radio mode display
2 seconds until the preset number blinks.
2 Band
or
FM stereo indicator
Press [BAND] to change the band.
3 Press
/[" ] or [# ] to select a preset number (1j6).
4 Press and hold P.SET (preset) for more than 2 seconds to memo-
Band
Frequency
Preset number
rize.
Manual Preset
Memory
≥The display blinks once, and a re-
ceiving station is saved in the
memory.
ST
Manually save a station in
the preset memory.
≥Press TUNE or P.SET to
change the cursor.
Spectrum Analyzer display
P.SET
Note:
≥Frequency setting can be performed even after selecting a preset num-
SOURCE
DISPLAY
TUNE
P.SET
ber.
(Preset)
Note:
Entering numbers directly on the remote control unit
≥
:
MOSFET
50W
X
4
Displays when not have any
menu settings. Radio and AUX-
IN mode do not have any menu
settings.
1 Select a band and frequency (step 1, 2 and 3 on the previous
MENU
VOL
page).
BAND
APM/ ;/ 1
2 Press and hold [1] to [6] for more than 2 seconds to memorize.
Scanning:
1 Select a band (steps 1 and 2 on the
previous page).
(Preset station/select)
2 Press and hold [BAND] (APM) for
[BAND]
(Auto preset
memory)
Auto Preset
Memory (APM)
(Tune)
more than 2 seconds.
SOURCE
PWR
RETURN
RET
BAND
MENU
(SOURCE)
≥The 6 strongest available stations will be automatically saved in the
memory under preset number 1 to 6.
≥Once set, the preset stations are sequentially scanned for 5 seconds
each. (Scanning)
FACE
DISP
1
S
•
A
[%] [$ ]
(Tune)
[" ] [# ]
(Preset station/
select)
DIMMER
DIM
3 Tuning
[DISP]
(Display)
[1] to [6]
(Preset station)
Automatically save rela-
tively strong stations in
the preset memory.
/[$ ]: Up
2
3
4
5
6
RANDOM
SCAN
REPEAT
VOL
or
7
8
0
9
≥Press
/[" ] or [# ] for the broadcast you want to listen
/[%]: Down
MUTE
to.
NUMBER
or
Press and hold
/[%] or [$ ] for
(Press [1] to [6] on the remote control unit.)
more than 0.5 seconds, then release.
Seeking will start.
Car Audio
Note:
≥Existing saved stations are overwritten with new stations after following this procedure.
Display Change
Press
/[DISP] (display) to change the display.
DISPLAY
1 Select a band (steps 1 and 2 on the previous page).
Radio mode display
(Default)
2 Press the Spectrum Analyzer display TUNE to show P.SET (preset).
Preset Station
Calling
DISPLAY
or
3 Press
/[" ] or [# ] to select the preset number for tuning
in the preset station.
(Press [1] to [6] on the remote control unit.)
Clock display
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
CD Player
S
H
S
H
Caution:
Disc Insert and Playback
≥Only 12 cm CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit.
≥This unit does not support CD text display.
≥This unit does not support MP3 disc playback.
≥Refer to page 47 about notes on CD-Rs/RWs.
≥To avoid damaging the front panel, do not push it down or place objects on it while it is open.
≥Do not use irregular shaped discs.
9
10
1 Open the front panel.
Press [OPEN] on the front panel.
≥Do not use discs that have a seal or label attached.
≥Do not insert foreign matter into the disc slot.
[OPEN]
SOURCE DISPLAY
≥The back side of the front panel becomes hot during use, but this is not an indication of any problem. Do
not touch anything here except [<] (eject).
≥The disc insertion slot and its vicinity become hot, but this is not an indication of any problem. Be care-
ful when inserting a disc or pressing [<] (eject).
(Eject)
<
Close
OPEN
MOSFET
50W X 4
MENU
VOL
BAND
APM/ ;/
1
Listening to a CD
Label side
CD Player Mode
Direct Track Selection
Only for the remote control unit
Example: track number 10
[BAND] (;/1) (Pause)
(Track)
(When a CD is in the player.)
Press /[SOURCE] to change to CD
SOURCE
player mode.
Playback starts automatically.
1 Press [„] (NUMBER).
CD player mode display
Track playing time
2 Insert the disc.
Playback will start automatically after the
unit recognized the loaded disc as an ordi-
nary music CD. (When a CD-R or CD-RW
which has CD-DA formatted data as the
same as an ordinary music CD is loaded,
this unit recognizes it as an ordinary music
CD.)
SOURCE
Track number
2 Press [1] [0].
3 Press [SET] to set.
The corresponding track starts playing.
Track Selection
Repeat and random indicator
/[$ ]: Advance to the next track.
Note:
Close the front panel manually.
≥Do not insert a disc when “ DISC” indi-
cator lights.
≥Lights when the disc is loaded/played.
≥Press
/[DISP] (display) or [„] (NUM-
DISPLAY
/[%]: Back to the beginning of the current track.
BER) to return to the regular mode.
≥If a non-existent track number is input and en-
tered, the command is invalid and the display re-
turns to regular mode.
Note:
Back to the previous track. (Press twice.)
≥Loading a disc when the power is off allows the
power to be turned on.
Track Search
Press and hold.
Stop and Disc Eject
Display Change
/[$ ]: Fast forward
Press
play.
/[DISP] (display) to change the dis-
DISPLAY
1 Press [OPEN] on the front panel.
2 Press [<] (eject) to stop CD play and eject the
/[%]: Fast backward
disc.
[BAND] (Pause)
Track number/track
playing time (Default)
SOURCE
PWR
RETURN
RET
BAND
MENU
(SOURCE)
Release to resume the regular play.
FACE
DISP
1
S
•
A
Note:
[%] [$ ]
(Track)
[SET]
DIMMER
DIM
Clock display
≥Ejecting the disc when the unit is in the CD player
mode allows the power to be turned off.
[DISP]
(Display)
2
3
4
5
6
Pause
RANDOM
SCAN
REPEAT
VOL
7
8
0
9
Press [BAND] (;/1).
MUTE
[„]
(NUMBER)
NUMBER
DISPLAY
Press [BAND] (;/1) again to cancel.
[0] to [9]
Car Audio
(Track number)
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
CD Player
(Continued)
S
H
S
H
Note:
Menu Setting on CD Player Mode
≥Press EXIT /[MENU]/[MENU], [DISP] (display) to
return to the regular mode.
11
12
≥Press RTN /[RET] (RETURN) to return to the previ-
ous display.
≥REP: Lights during repeat play.
RAND: Lights during random play.
1 Menu
2 Submenu
3 Setting
1
[MENU]
[MENU]
MOSFET
50W X 4
MOSFET
50W
X
4
MOSFET
50W
X
4
MENU
MENU
MENU
VOL
VOL
VOL
BAND
BAND
BAND
APM/ ;/
1
APM/ ;/
1
APM/ ;/
1
2
(Submenu)
1
2
1
SET
SET
(Setting)
RTN
EXIT
: Lights during menu play setting.
: Lights during CD player menu mode.
Direct setting on the re-
mote control unit when the
menu is not displayed
1 Menu
2 Submenu
3 Setting
Press [6] (REPEAT) to change
setting.
Press
or
/[" ] or [# ] to change setting.
: Repeat the current track.
: Cancel
or
1 Press
/
Repeat Play
Default: REP OFF
[%] or [$ ] to select
“REPEAT”.
(When you press a button, the
screen on the left is displayed
for 2 seconds.)
2 Press SET /[SET] to set.
1 Press [MENU] during CD
playing to display “MODE”.
2 Press SET /[SET] to set.
Press [4] (RANDOM) to
change setting.
Press
/[" ] or [# ] to change setting.
or
or
1 Press
/
Random Play
Default: RAND OFF
: All the available track plays in a random
sequence.
[%] or [$ ] to select
On: “RAND” lights.
“RANDOM”.
2 Press SET /[SET] to set.
Off:
: Cancel
(Displayed for 2 seconds.)
Only for the remote control unit
When the menu is not displayed
Press [5] (SCAN) to change setting.
On: The first 10 seconds of each track plays in sequence.
SOURCE
RETURN
RET
Scan Play
Default: Off
PWR
FACE
DISP
1
BAND
MENU
[MENU]
[%] [$ ]
Blinks.
S
•
A
[DISP] (Display)
DIMMER
DIM
Off: Cancel
(Menu/submenu)
[" ] [# ]
(Setting)
2
3
[5] (SCAN)
[4] (RANDOM)
4
5
6
(Displayed for 2 seconds.)
RANDOM
SCAN
REPEAT
VOL
7
8
0
9
MUTE
[SET]
NUMBER
[6] (REPEAT)
Car Audio
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
CD Changer Control
S
H
S
H
CD changer functions are designed for optional Panasonic CD changer unit.
Direct Disc Selection
Only for the remote control unit
Example: disc number 10
Preparation:
13
14
≥Connect the CD changer, and load a magazine (disc).
Note:
1 Press [„] (NUMBER).
≥Loading a magazine when the power is off allows the power to be turned on.
≥Ejecting the magazine when the unit is in the CD changer mode allows the power to be turned off.
≥This unit does not support CD-ROM, CD-R or CD-RW playback through the CD changer. Use the CD changer
to listen to normal music CD exclusively.
2 Press [1] [0].
≥Pausing does not function in the CD changer mode.
CD changer mode display
CD Changer Mode
Repeat and random indicator
1
(When a CD changer is connected and a maga-
zine is in the changer.)
Disc number Track number
3 Press [SET] to set.
The first track of the corresponding disc starts
playing.
Press
/[SOURCE] to
SOURCE
SOURCE
change to CD changer mode.
Playback starts automatically.
Note:
≥Press
/[DISP] (display) or [„] (NUM-
DISPLAY
≥Press DISC or TRC to change
the cursor.
Note:
BER) to return to the regular mode.
≥If a non-existent disc number is input and en-
tered, the command is invalid and the display re-
turns to regular mode.
≥
: Load a magazine with CDs.
≥Lights when the changer (magazine) is con-
nected.
≥Lights when the disc is played.
≥
: Magazine is ejected in the
CD changer mode.
Display Change
SOURCE
DISPLAY
TRC
(Track)
DISC
Press
play.
/[DISP] (display) to change the dis-
DISPLAY
MOSFET
50W X 4
Disc/track number (Default)
Track playing time
Clock display
MENU
VOL
BAND
APM/ ;/ 1
(Disc)
(Track)
Note:
≥Press
/[DISP] (display) to return to the
DISPLAY
regular mode.
2 Disc Selection
/[" ]: Next disc.
SOURCE
PWR
RETURN
RET
[%] [$ ] (Track)
[" ] [# ] (Disc)
[SET]
BAND
MENU
(SOURCE)
FACE
DISP
1
S
•
A
DISPLAY
/[# ]: Previous disc.
DIMMER
DIM
[DISP]
2
3
(Display)
[0] to [9]
4
5
6
RANDOM
SCAN
REPEAT
VOL
3 Track Selection
Track Search
(Disc number)
7
8
0
9
/[$ ]: Advance to the next track.
Press and hold.
/[$ ]: Fast forward
MUTE
[„]
(NUMBER)
NUMBER
/[%]: Back to the beginning of the current track.
Car Audio
Back to the previous track. (Press twice.)
/[%]: Fast backward
Release to resume the regular play.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
CD Changer Control
(Continued)
S
H
S
H
Note:
Menu Setting on CD Changer Mode
≥Press EXIT /[MENU]/[MENU], [DISP] (display) to
return to the regular mode.
15
16
≥Press RTN /[RET] (RETURN) to return to the previ-
ous display.
≥REP: Lights during repeat play.
Blinks during disc repeat play.
RAND: Lights during random play.
Blinks during disc random play.
1
[MENU]
[MENU]
1 Menu
2 Submenu
3 Setting
MOSFET
50W X 4
MOSFET
50W X 4
MOSFET
50W X 4
MENU
MENU
MENU
VOL
VOL
VOL
BAND
BAND
BAND
1
APM/ ;/
1
APM/ ;/
1
APM/ ;/
(Submenu)
SET
SET
1
2
1
2
(Setting)
RTN
EXIT
: Lights during menu play setting.
Direct setting on the remote con-
trol unit when the menu is not
displayed
: Lights during CD changer menu mode.
1 Menu
2 Submenu
3 Setting
Press [6] (REPEAT) to change setting.
Press
or
/[" ] or [# ] to change setting.
or
1 Press
/
Repeat Play
Default: REP OFF
: Repeat the current track.
(When you press a button, the
screen on the left is displayed for
2 seconds.)
[%] or [$ ] to select
“REPEAT”.
2 Press SET /[SET] to set.
: Cancel
Press and hold [6] (REPEAT) for more
than 2 seconds to change setting.
or
Press
/[" ] or [# ] to change setting.
: Repeat the current disc.
: Cancel
or
1 Press
/
Disc Repeat Play
[%] or [$ ] to select
“D-REPEAT”.
2 Press SET /[SET] to set.
(When you press a button, the
screen on the left is displayed for
2 seconds.)
Default: D-REP OFF
1 Press [MENU] during CD
changer playing to display
“MODE”.
2 Press SET /[SET] to set.
Press [4] (RANDOM) to change setting.
Press
Press
or
or
/[" ] or [# ] to change setting.
: All the available tracks on all discs
plays in a random sequence.
or
1 Press
/
Random Play
Default: RAND OFF
On: “RAND” lights.
[%] or [$ ] to select
“RANDOM”.
2 Press SET /[SET] to set.
Off:
: Cancel
(Displayed for 2 seconds.)
Press and hold [4] (RANDOM) for
more than 2 seconds to change setting.
/[" ] or [# ] to change setting.
: All the available tracks on the current
disc plays in a random sequence.
or
1 Press
/
Disc Random Play
Default: D-RND OFF
[%] or [$ ] to select
“D-RANDOM”.
2 Press SET /[SET] to set.
On: “RAND” blinks.
Off:
: Cancel
(Displayed for 2 seconds.)
Only for the remote control unit
When the menu is not displayed
On: The first 10 seconds of each track on all
discs plays in sequence.
Off: Cancel
SOURCE
PWR
RETURN
RET
BAND
MENU
[MENU]
[%] [$ ]
(Menu/
submenu)
[" ] [# ]
(Setting)
[SET]
Press [5] (SCAN) to change set-
ting.
Scan Play
Default: Off
[DISP]
(Display)
[5] (SCAN)
FACE
DISP
1
S
•
A
DIMMER
DIM
Blinks.
2
3
(Displayed for 2 seconds.)
4
5
6
RANDOM
SCAN
REPEAT
VOL
7
8
0
9
[4] (RANDOM)
[6] (REPEAT)
On: The first 10 seconds of the first track of all
the discs plays in sequence.
Off: Cancel
MUTE
NUMBER
Press and hold [5] (SCAN) for
more than 2 seconds to change
setting.
Disc Scan Play
Default: Off
Car Audio
Blinks.
(Displayed for 2 seconds.)
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
Front Panel Settings [FACE]
S
H
S
H
Note:
1 Menu
2 Submenu
3 Setting
≥Press EXIT /[MENU]/[MENU], [DISP] (display) to
return to the regular mode.
≥Press RTN /[RET] (RETURN) to return to the previ-
ous display.
17
18
[MENU]
1
[MENU]
MOSFET
50W
X
4
MOSFET
50W X 4
MOSFET
50W X 4
MENU
MENU
MENU
VOL
VOL
VOL
BAND
BAND
BAND
APM/ ;/
1
APM/ ;/
1
APM/ ;/
1
RTN
EXIT
(Setting)
1
2
1
2
3
2
SET
(Menu)
SET
(Submenu)
: Lights during menu play setting.
: Lights during FACE mode.
: Lights during AUDIO mode.
Direct setting on the re-
mote control unit when the
menu is not displayed
1 Menu
2 Submenu
3 Setting
or
Press
/[" ] or [# ] to change setting.
OPEN
The brightness of the entire front
panel changes.
MENU
BAND
VOL
Front Panel Brightness
APM/ ;/
1
Press and hold [FACE] for
more than 2 seconds to
change setting.
or
1 Press
/
The brightness of the screen can be ad-
justed to the desired level so that it will fit
in with the equipment inside the car and
the front panel buttons.
: Bright (brighter than “HALF”)
[%] or [$ ] to select
“SHUTTER”.
2 Press SET /[SET] to set.
: The entire front panel darkens and the illuminated
colors inside the panel change in appearance.
: Bright
1 Press [MENU].
2 Press or
(When you press a button,
the screen on the left is dis-
played for 2 seconds.)
/
Default: OPEN
Setting range: OPEN, HALF, CLOSE
[%] or [$ ] to select
“FACE”.
OPEN
(See page 36 for information on changing
the brightness of just the display area.)
MOSFET
50W
X
4
MENU
VOL
BAND
APM/ ;/
1
3 Press SET /[SET] to set.
or
Press
/[" ] or [# ] to change setting.
Press [FACE] to change set-
ting.
Color Change
You can change the color of the [VOL "
: 5 kinds (below),
or
1 Press
/
: Purple
: Blue
white and yellow
[%] or [$ ] to select
: Changes according
to the volume level.
# ] [MENU] [BAND] buttons.
“COLOR”.
(When you press a button,
the screen on the left is dis-
played for 2 seconds.)
: Aqua blue
: Green
2 Press SET /[SET] to set.
Default: 7COLOR
Variety: 5 kinds, LEVEL, 7COLOR
: Red
Audio and Sound Settings [AUDIO]
Direct setting on the re-
mote control unit when the
menu is not displayed
1 Menu
2 Submenu
3 Setting
or
Press
/[" ] or [# ] to change setting.
S·HDB (Super High
Definition Bass)
Especially for rock music, the bass-sound
will be more powerful.
1 Press [MENU].
Press [\ ] (S·HDB) to change
setting.
: The bass sounds of the speakers are strongly
emphasized. “( ” lights.
: The bass sounds of the speakers are moder-
ately emphasized. “( ” lights.
(The sounds of the subwoofer can be heard
clearly.)
or
1 Press
/
or
2 Press
/
[%] or [$ ] to select
[%] or [$ ] to select
“AUDIO”.
3 Press SET /[SET] to set.
“S·HDB”.
(When you press a button,
the screen on the left is dis-
played for 2 seconds.)
2 Press SET /[SET] to set.
Default: S·HDB OFF
Setting range: S·HDB OFF, BOOM, TIGHT
: S·HDB is non-active.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
Audio and Sound Settings [AUDIO]
(Continued)
S
H
S
H
Note:
1 Menu
2 Submenu
3 Setting
≥Press EXIT /[MENU]/[MENU], [DISP] (display) to
return to the regular mode.
≥Press RTN /[RET] (RETURN) to return to the previ-
ous display.
19
20
[MENU]
1
[MENU]
MOSFET
50W X 4
MOSFET
50W X 4
MOSFET
50W X 4
MENU
MENU
MENU
VOL
VOL
VOL
BAND
BAND
BAND
APM/ ;/
1
APM/ ;/
1
APM/ ;/
1
(Setting)
RTN
EXIT
2
3
2
1
2
1
(Menu)
(Submenu)
SET
SET
: Lights during menu play setting.
: Lights during AUDIO mode.
1 Menu
2 Submenu
3 Setting
or
Press
/[" ] or [# ] to adjust the level.
or
1 Press
/
[DISP] (Display)
[%] or [$ ] to select
/[" ] : Increase the bass.
Bass and Treble
“BASS”.
SOURCE
PWR
RETURN
RET
2 Press SET /[SET] to set.
/[# ] : Decrease the bass.
BAND
MENU
You can adjust the bass and treble sound.
[MENU]
FACE
DISP
1
S
•
A
[%] [$ ]
DIMMER
DIM
Default: BAS (Bass) 0 dB
TRE (Treble) 0 dB
Setting range: j12 dB to i12 dB
(by 2 dB)
(Menu/submenu)
[" ] [# ]
(Setting)
or
Press
/[" ] or [# ] to adjust the level.
or
2
3
1 Press
/
4
5
6
[%] or [$ ] to select
“TREBLE”.
2 Press SET /[SET] to set.
RANDOM
SCAN
REPEAT
VOL
/[" ] : Increase the treble.
7
8
0
9
MUTE
[SET]
NUMBER
/[# ] : Decrease the treble.
Car Audio
or
Press
Press
/[" ] or [# ] to adjust the level.
or
1 Press
/
[%] or [$ ] to select
“BALANCE”.
2 Press SET /[SET] to set.
1 Press [MENU].
/[" ] : Right enhanced.
Balance and Fader
You can adjust the sound balance among
the front, rear, right and left speakers.
or
2 Press
/
/[# ] : Left enhanced.
[%] or [$ ] to select
“AUDIO”.
3 Press SET /[SET] to set.
Default: BAL (Balance) CNT (Center)
FAD (Fader) CNT (Center)
/[" ] or [# ] to adjust the level.
or
or
1 Press
/
[%] or [$ ] to select
“FADER”.
2 Press SET /[SET] to set.
/[" ] : Front enhanced.
/[# ] : Rear enhanced.
Setting range: 15 levels each
Subwoofer Level
You can change the subwoofer volume level.
Default: 0 dB
Setting range: j∞ (subwoofer mute),
j6 dB to i6 dB (by 2 dB)
or
Press
/[" ] or [# ] to adjust the level.
or
1 Press
/
[%] or [$ ] to select
“SUB-W LEV”.
2 Press SET /[SET] to set.
/[" ] : Increase the level.
/[# ] : Decrease the level.
Subwoofer Low Pass Filter
Select the upper limit frequency of the
sound from subwoofer.
Default: 120 Hz
Setting range: 120 Hz/80 Hz
Press
or 80 Hz.
/[" ] or [# ] to change the setting 120 Hz
or
or
1 Press
/
[%] or [$ ] to select
“SUB-W FRQ”.
2 Press SET /[SET] to set.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
Picture (Display) Settings [PICTURE]
S
H
S
H
Note:
1 Menu
2 Submenu
3 Setting
≥Press EXIT /[MENU]/[MENU], [DISP] (display) to
return to the regular mode.
≥Press RTN /[RET] (RETURN) to return to the previ-
ous display.
≥Press Spectrum Analyzer display on S A setting to
return to the previous display.
21
22
[MENU]
1
[MENU]
MOSFET
50W X 4
MOSFET
50W X 4
MOSFET
50W X 4
MENU
MENU
MENU
VOL
VOL
VOL
·
BAND
BAND
BAND
APM/ ;/
1
APM/ ;/
1
APM/ ;/
1
(Setting)
RTN
EXIT
2
3
2
(Menu)
(Submenu)
1
2
1
SET
SET
: Lights during menu play setting.
: Lights during PICTURE mode.
Direct setting on the re-
mote control unit when the
menu is not displayed
1 Menu
2 Submenu
3 Setting
Press
/[" ] or [# ] to change setting.
: Bright
or
Dimmer (display brightness
setting range)
Press [DIM] (DIMMER) to
change setting.
or
1 Press
/
[%] or [$ ] to select
“DIMMER”.
2 Press SET /[SET] to set.
The brightness of just
the display area of the
front panel changes.
: Medium
: Dark
OPEN
(When you press a button,
the screen on the left is dis-
played for 2 seconds.)
MOSFET
50W
X
4
MENU
VOL
BAND
APM/ ;/
1
OPEN
Default: DIMMER 3
Setting range: DIMMER 1 to 3
(See page 32 for information on changing
the brightness of the entire front panel.)
MENU
BAND
VOL
APM/ ;/
1
Press
/[" ] or [# ] to change setting.
or
1 Press [MENU].
or
1 Press
/
Press [S·A] to change setting.
Spectrum Analyzer (S·A)
Display Pattern
Default: KEY
Variety: KEY, PATTERN 1 to 5
: S·A off (regular
display)
: S·A 3
: S·A 4
: S·A 5
[%] or [$ ] to select
or
2 Press
/
“S·A”.
(When you press a button,
the screen on the left is dis-
played for 2 seconds.)
[%] or [$ ] to select
“PICTURE”.
: S·A 1
2 Press SET /[SET] to set.
3 Press SET /[SET] to set.
: S·A 2
[DISP] (Display)
Press
/[" ] or [# ] to change setting.
or
[S·A] (Spectrum Analyzer)
Contrast
Allows you to adjust the display contrasts
for better viewing.
or
1 Press
/
Level up
[%] or [$ ] to select
“CONTRAST”.
2 Press SET /[SET] to set.
[MENU]
SOURCE
PWR
RETURN
BAND
RET
MENU
FACE
DISP
1
S
•
A
[%] [$ ]
DIMMER
DIM
Default: CONT 3
Setting range: CONT 1 to 5
(Menu/submenu)
[" ] [# ]
(Setting)
2
3
Level down
4
5
6
RANDOM
SCAN
REPEAT
VOL
7
8
0
9
MUTE
[SET]
NUMBER
[DIM] (DIMMER)
Car Audio
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
E
N
G
L
I
E
N
G
L
I
Function Settings [FUNCTION]
S
H
S
H
Note:
1 Menu
2 Submenu
3 Setting
≥Press EXIT /[MENU]/[MENU], [DISP] (display) to
return to the regular mode.
≥Press RTN /[RET] (RETURN) to return to the previ-
ous display.
23
24
[MENU]
1
[MENU]
MOSFET
50W X 4
MOSFET
50W X 4
MOSFET
50W X 4
MENU
MENU
MENU
VOL
VOL
VOL
BAND
BAND
BAND
APM/ ;/
1
APM/ ;/
1
APM/ ;/
1
[DISP] (Display)
SOURCE
PWR
RETURN
RTN
(Setting)
RTN
EXIT
2
3
2
(Menu)
(Submenu)
1
2
1
SET
SET
BAND
MENU
[MENU]
[%] [$ ]
(Menu/submenu)
[" ] [# ]
(Setting)
FACE
DISP
1
S
•
A
DIMMER
DIM
: Lights during menu play setting.
: Lights during FUNCTION mode.
2
3
4
5
6
RANDOM
SCAN
REPEAT
VOL
1 Menu
2 Submenu
3 Setting
7
8
0
9
MUTE
[SET]
NUMBER
Press
/[" ] or [# ] to change setting.
: No sound.
Mute/Attenuation
You can select how much to lower the
or
Car Audio
or
1 Press
/
[%] or [$ ] to select
“MUTE/ATT”.
volume when
/[MUTE] is pressed.
MUTE
Default: KEY: MUTE
Setting range: KEY: MUTE, KEY: ATT
2 Press SET /[SET] to set.
: Decrease the volume to 1/10. (Attenuation)
or
Press
Press
/[" ] or [# ] to change setting.
Button Operation Sound
Enable or disable the beep or button op-
eration.
or
1 Press
/
[%] or [$ ] to select
“BEEP SET”.
2 Press SET /[SET] to set.
: Operation sound (beep) is on.
1 Press [MENU].
: Operation sound (beep) is off.
Default: BEEP ON
or
2 Press
/
[%] or [$ ] to select
“FUNCTION”.
3 Press SET /[SET] to set.
Security function
or
/[" ] or [# ] to change setting.
When the key in the ignition is turned OFF.
Security Function
or
1 Press
/
≥Security message will be active.
[%] or [$ ] to select “SE-
CURITY”.
2 Press SET /[SET] to set.
: Security function is active.
The security indicator (LED) blinks when
the removable face plate is removed from
the unit.
≥The panel removable alarm will be active.
: Security function is non-active.
Default: SLED ON
When the removable face plate is removed.
≥The security indicator blinks. (➡ page 53)
Direct setting on the remote
control unit on the unit off
Press
or
/[" ] or [# ] to change setting.
: Black display
Display Setting
You can select display pattern on the unit
off.
or
1 Press
/
[%] or [$ ] to select “OFF
DISP”.
2 Press SET /[SET] to set.
Press [DISP] (display) to change
setting on the unit off.
: Demonstration display
: Clock display is on.
Default: BLACK
Setting range: DEMO, CLOCK, BLACK
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CQ-DF802W
CQ-DF802W
|