Operating Instructions
Blu-ray DiscTM Player
Model No. DMP-BDT330
DMP-BDT230
Unless otherwise indicated, illustrations in these operating instructions are of DMP-BDT330.
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 16) or
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
VQT4W95
GN GC GA GW
Download from Www.Somanuals.com. All Manuals Search And Download.
Restriction on use of
To dispose or transfer this unit
unauthorized copied content
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the
procedure to return all the settings to the factory presets to delete
the user settings. (> 37, “To return all settings to the factory
preset.”)
≥ The operation history may be recorded in the memory of this
unit.
This unit adopts the following technology for copyright protection.
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film and
videos and their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be displayed and
playback or copying will be interrupted.
Information on Disposal in
other Countries outside the
European Union
This symbol is only valid in the
European Union.
More information about Cinavia technology is provided at the
Cinavia Online Consumer Information Center at http://
by mail, send a postcard with your mailing address to: Cinavia
Consumer Information Center, P.O. Box 86851, San Diego, CA,
92138, USA.
If you wish to discard this
product, please contact your
local authorities or dealer and
ask for the correct method of
disposal.
Wireless LAN connection
The following limits are in place regarding the usage of this unit.
You must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any
condition of use or disuse of this unit.
≥ Data transmitted and received over radio waves may be
intercepted and monitored.
≥ This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and
follow the following points:
–
Do not expose this unit to high temperatures or direct
sunlight.
–
–
–
Do not bend, or subject this unit to strong impacts.
Keep this unit away from moisture.
Do not disassemble or alter this unit in any way.
[For[Singapore]
Complies with
IDA Standards
DB01017
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Table of contents
Precautions . . . . . . . . . . . . . . . . . 2
Getting started
Playback
Accessories . . . . . . . . . . . . . . . . . 5 Inserting or removing media . . . . 17
Unit and media care. . . . . . . . . . . 5 HOME menu . . . . . . . . . . . . . . . . 18
Playable media. . . . . . . . . . . . . . . 6 Multi User Mode . . . . . . . . . . . . . 19
Control reference guide . . . . . . . . 9 Playback . . . . . . . . . . . . . . . . . . . 20
VIERA Connect
(Enjoying Internet Service) . . . . 23
Connections and settings
Home Network feature . . . . . . . . 24
“HDMI CEC” . . . . . . . . . . . . . . . . 27
USB Sharing . . . . . . . . . . . . . . . . 27
Connecting to a TV . . . . . . . . . . 11
Connecting to
an amplifier/receiver. . . . . . . . . 12
Connecting to the network . . . . . 14
Settings . . . . . . . . . . . . . . . . . . . 15
Reprogramming
Settings
Option menu . . . . . . . . . . . . . . . . 28
the remote control . . . . . . . . . . 17 Setup menu. . . . . . . . . . . . . . . . . 30
Reference
Troubleshooting guide . . . . . . . . 37
Messages . . . . . . . . . . . . . . . . . . 41
Specifications . . . . . . . . . . . . . . . 43
Limited Warranty (ONLY FOR
AUSTRALIA). . . . . . . . . . . . . . . 47
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Getting started
Accessories
Unit and media care
Check the supplied accessories before using this
unit.
∫ Clean this unit with a soft, dry cloth
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
1
Remote control
(N2QAYB000878)
Batteries for remote control
HDMI Cable
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
2
1
∫ This unit’s lens
[For[Australia,[New[Zealand[and[India]
AC mains lead
[For[the[Middle[East[and[South[East[Asia]
1
Lens cleaner: RP-CL720AE
≥ This lens cleaner may not be for sale
depending on the region.
≥ This lens cleaner is sold as specific for DIGA,
but can be used on this unit as well.
2
AC mains lead*
*
See page 11 for more information.
≥ Product numbers provided in these operating instructions
correct as of February 2013. These may be subject to
change.
∫ Clean discs
≥ Do not use AC mains lead with other equipment.
DO NOT
DO
∫ Using the remote control
Insert so the poles (i and j) match those in the
remote control.
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
R6/LR6, AA
(Alkaline or manganese batteries)
≥ Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
≥ Do not use the following discs:
Point it at the remote control signal sensor on this
unit. (> 10)
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Playable media
Device Media markings
Device types
BD-Video
BD-RE
Contents format
Video
Video, JPEG, MPO
Video, MKV, Xvid
BD
BD-R
DVD-Video
Video
DVD-R
Video, AVCHD, MKV,
Xvid, JPEG, MPO,
AAC, FLAC, MP3,
WAV, WMA
DVD
DVD-R DL
DVD-RW
Video, AVCHD
Music [CD-DA]
—
+R/+RW/+R DL
Music CD
MKV, Xvid, JPEG,
MPO, AAC, FLAC,
MP3, Music [CD-DA],
WAV, WMA
CD
CD-R
CD-RW
—
SD Memory Card (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB) AVCHD, AVCHD 3D,
SD
SDXC Memory Card (48 GB, 64 GB)
MP4, JPEG, MPO
(Compatible with both mini and micro types)
MKV, MP4, MPEG2,
Xvid, JPEG, MPO,
AAC, FLAC, MP3,
WAV, WMA
USB devices
(up to 2 TB)
—
USB
≥ See pages 7 and 43 for more information on the types of content that can be played.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
6
∫ Discs that cannot be played by this
unit
Any other disc that is not specifically
supported or previously described.
≥ DVD-RAM
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW
recorded by a recorder needs to be finalized by
the recorder to play on this unit. Please refer to
the recorder’s instructions.
≥ Super Audio CD
∫ BD-Video
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ HD DVD
≥ This unit supports high bit rate audio (Dolby®
Digital Plus, Dolby® TrueHD, DTS-HD High
Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
≥ [BDT230] If “Dolby D/Dolby D +/Dolby TrueHD” is
set to “PCM” and “DTS Neo:6” is set to “Off”,
the maximum possible number of Dolby® sound
is 5.1ch PCM. (> 31, 32)
∫ Region management information
BD-Video:
[For[South[East[Asia]
This unit can play
Example:
BD-Video discs
supporting the
region code “A”.
∫ 3D
≥ 3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.
[For[Australia,[New[Zealand[and[the[Middle[East]
This unit can play
Example:
≥ 2D video can be enjoyed as 3D virtually. (> 29)
BD-Video discs
supporting the
region code “B”.
∫ Music CD
Operation and sound quality of CDs that do not
conform to CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed.
[For[India]
This unit can play
Example:
BD-Video discs
supporting the
region code “C”.
∫ SD card
≥ miniSD Cards, microSD Cards,
microSDHC Cards and
microSDXC Cards can be used,
but must be used with an adaptor
card. These are usually supplied
with such cards, or otherwise
DVD-Video:
[For]the]Middle]East]
This unit can play
Example:
DVD-Video discs
supporting the
customer provided.
2
≥ To protect the card’s contents,
move the record prevention tab (on the SD
card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards
that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory
Cards in FAT32 format and SDXC Memory
Cards in exFAT.
≥ If the SD card is used with incompatible
computers or devices, recorded contents may
be erased due to the card being formatted etc.
≥ Usable memory may be slightly less than the
card capacity.
region number “2” or
“ALL”.
3
2
ALL
ALL
ALL
ALL
5
4
4
5
[For[South[East[Asia]
This unit can play
DVD-Video discs
supporting the
region number “3” or
“ALL”.
Example:
2
2
2
3
3
3
3
[For[Australia[and[New[Zealand]
This unit can play
Example:
DVD-Video discs
supporting the
region number “4” or
“ALL”.
4
[For[India]
This unit can play
DVD-Video discs
supporting the
region number “5” or
“ALL”.
Example:
5
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
7
∫ USB device
≥ This unit does not guarantee connection with all
USB devices.
≥ This unit does not support USB device
charging.
≥ FAT12, FAT16, FAT32, and NTFS file systems
are supported.
≥ This unit supports USB2.0 High Speed.
≥ This unit can support an HDD formatted to
FAT32 and NTFS.
Some types of HDD may require the use of its
external power supply unit.
∫ BD-RE, BD-R
Discs recorded in DR mode using Panasonic
Blu-ray Disc recorders may not play back the
audio etc., correctly.
≥ It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in these operating instructions. Read the disc’s
instructions carefully.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Control reference guide
1
2
Turn the unit on and off
TV operation buttons
11
You can operate the Panasonic TV using the
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[i j VOL] : Adjust the volume
Select title numbers, etc./Enter numbers or
characters
Cancel
Select audio (> 20)
Basic playback control buttons (> 20)
Show USB Sharing menu (> 27)
Show Top menu (> 21)
1
2
12
13
3
3
14
4
5
6
7
8
9
ヤモワヤユロ
モヶュリヰチ
4
5
15
6
Show Option menu (> 28)
10 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
11 Transmit the remote control signal
12 Open or close the disc tray (> 17)
13 Show status messages (> 21)
14 Show MiracastTM screen (> 24)
15 Show the Home screen of the VIERA
Connect (> 23)
7
8
16
17
18
19
20
9
10
16 Exit the menu screen
17 Show Pop-up menu (> 21)
18 Show HOME menu (> 18)
19 [3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 20)
20 Return to previous screen
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
9
8
11
[BDT330]
Pull to flip down the
front panel.
SD CARD
IR
1
2 3 4 5
6
7
9 10
8
9
10
11
Pull to flip down the front panel.
[BDT230]
SD CARD
1
2
4
6
7
1
2
Disc tray (> 17)
Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
6
7
8
9
USB ports (> 17, 27)
Display
Open or close the disc tray (> 17)
Stop (> 20)
10 Start play (> 20)
3
[BDT330] Blue LED
11 Standby/on switch (Í/I) (> 15)
It is possible to set the LED to turn on/off.
(> 36)
SD card slot (> 17, 27)
[BDT330] V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off.
(> 36)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
4
5
Rear panel terminals (> 11–14)
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Connections and settings
Connecting to a TV
Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
The HDMI-compliant cable is supplied with this unit.
[For]the]Middle]East]
Use the AC mains lead that matches the socket for the area you live in.
≥ In Saudi Arabia, always use the 3-pin AC mains lead.
[For[South[East[Asia]
AC mains lead with a label is for Thailand.
AC mains lead without a label is for areas other than Thailand.
[BDT330] Use HDMI AV OUT MAIN terminal.
To a household mains
socket
HDMI cable (supplied)
HDMI IN
AC mains lead
(supplied)
[BDT230]
≥ This unit consumes a small amount of AC power (> 43) even when turned off. For the purpose of
power conservation, the unit can be disconnected if you will not be using it for extended period of
time.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
HDMI AV OUT
[BDT330] Use HDMI AV OUT MAIN terminal.
HDMI cable
(supplied)
HDMI cable
HDMI OUT
(ARC)
HDMI IN
(ARC)
HDMI IN
Amplifier/receiver
[BDT230]
≥ Set “Digital Audio Output” (> 31).
≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV, then connect
the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
HDMI AV OUT SUB [BDT330]
You can enjoy richer sound by using the HDMI AV OUT SUB terminal.
HDMI cable (supplied)
HDMI cable
HDMI IN
HDMI IN
Amplifier/receiver
≥ Set “HDMI(SUB) Output Mode” to “V.OFF(Video Off)”. (> 31)
– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.
≥ It is possible to play back 3D videos and 3D still pictures when the connected TV is 3D compatible,
even if the amplifier/receiver is not 3D compatible.
≥ The HDMI connection using HDMI AV OUT MAIN supports HDMI CEC (> 27).
The HDMI AV OUT SUB terminal is not compatible with the HDMI CEC.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
12
OPTICAL
[BDT330]
Optical digital cable
OPTICAL IN
[BDT230]
Amplifier/receiver
≥ Set “HDMI Audio Output” to “Off” (> 31).
≥ Set “Digital Audio Output” (> 31).
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Connecting to the network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 16)
≥ You can enjoy BD-Live (> 22)
≥ You can enjoy VIERA Connect (> 23)
≥ You can access other devices (Home Network) (> 24)
≥ This unit supports Wi-Fi DirectTM and can make a wireless connection to wireless devices without
router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Wi-Fi DirectTM. (> 25, 33)
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
This unit has built-in Wi-Fi® and can be connected to a wireless router.
[BDT330]
[BDT230]
Wireless router, etc.
Internet
≥ For up-to-date compatibility information on your wireless router, refer to
(This site is in English only.)
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
≥ See page 3 for the precautions for wireless LAN connection.
LAN cable connection
[BDT330]
LAN Cable
Broadband router, etc.
Internet
[BDT230]
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Select “Search for wireless network” or “WPS
(PUSH button)” and press [OK], then follow
the on-screen instructions to continue with
the settings.
Settings
Easy Settings
Wireless Settings
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Select a connection method to wireless access point.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button)
Preparation
Turn on the TV and select the appropriate
video input.
1 Press [Í].
WPS (PUSH button):
Setup screen appears.
e.g.
If your wireless router supports
WPS (PUSH button), you can
easily perform the settings by
pressing WPS button on it.
2 Follow the on-screen instructions to
continue with the settings.
2
*
WPS (Wi-Fi Protected SetupTM
)
≥ You can perform this setup anytime by selecting “Easy
Settings” in the Setup menu. (> 35)
is a standard that facilitates settings relating to the
connection and security of wireless LAN devices.
1
Press WPS button or corresponding button of
the wireless router until the lamp starts
flashing.
Easy Network Setting
≥ For details, refer to the operating instruction
of the wireless router.
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
2
Press [OK].
Select “Wired” or “Wireless” and press [OK].
Search for wireless network:
Easy Network Setting
Select a connection mode.
≥ When you select “Search for wireless network”,
the available wireless networks will be
displayed. Select your network name and press
[OK].
– If your network name is not displayed, search
again by pressing the red button on the
remote control.
– Stealth SSID will not be displayed when you
select “Search for wireless network”. Enter
manually by using “Manual setting”.
Press [HOME]
Wired
Wireless
OK
RETURN
> press [OK] to select “Setup”
> select “Player Settings”
∫ “Wired” connection
Follow the on-screen instructions to establish
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Connection Setting” and press [OK]
> select “Manual setting” and press [OK]
≥ If your wireless network is encrypted,
Encryption Key input screen will be displayed.
Input the encryption key of your network.
your connection settings.
∫ “Wireless” connection
Before beginning wireless connection setup
≥ Obtain your network name (SSID*1).
≥ If your wireless connection is encrypted,
please be sure that you know your
encryption key.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Firmware updates
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Easy
Network Setting” in the Setup menu. (> 33)
≥ You can redo these settings individually using “Network
Settings”. (> 33)
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings
(encryption level, etc.) of the wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of the wireless router.
≥ Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME]
*1
SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
The wireless router compatible with Wi-Fi Protected
SetupTM may have the mark.
> press [OK] to select “Setup”
> select “Player Settings”
> select “System” and press [OK]
> select “Firmware Update” and press [OK]
> select “Update Now” and press [OK]
*2
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FIN” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
The firmware has been updated.
Current Version:x.xx
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
(This site is in English only.)
To show the firmware version on this unit. (> 36,
“Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 36)
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Playback
Reprogramming the
remote control
Inserting or removing
media
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will need to change the
remote control code to prevent this occurrence.
(> 36, “Remote Control”)
[BDT330]
USB1 USB2
SD CARD
IR
[BDT230]
USB1 USB2
SD CARD
Notes
≥ When inserting a media item, ensure that it is
facing the right way up.
≥ When removing the SD card, press the centre
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥ When you connect a USB HDD, use the right
USB port (USB2).
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
17
HOME menu
Videos/Photos/Music
Disc
Major functions of this unit can be operated from
the HOME menu.
Play back the contents.
(> 20)
≥ When multiple contents
are recorded, select the
types of contents or the
title.
USB
Preparation
Turn on the TV and select the appropriate video
input on the TV.
≥ “USB1” indicates the
left USB port, while
“USB2” indicates the
right one. (> 17)
1 Press [Í] to turn on the unit.
SD Card
≥ After network service introduction banner is
shown, the HOME menu is displayed.
– When connected to the network, the
banner content may be changed.
– You can disable the “Start-up Banner”
(> 36).
Network
Displays the Home
screen of VIERA
Connect. (> 23)
2 Press [OK] or [3, 4, 2, 1] to select the
Network Service
item.
≥ If there are any other items, repeat this
step.
DLNA Client (> 25)
Miracast (> 24)
HOME
Home Network
Network
Blu-ray Disc Player
Media Renderer (> 26)
Photos
Setup
Music
Setup
Videos
Register
1st user
Player Settings
(> 30)
USB Management (> 22)
USB Sharing
Wallpaper
(> 27)
Changes the background
of HOME menu.
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when
using a disc with both data files (MP3, JPEG, MKV, etc.)
and Video (BDAV and AVCHD). (> 36)
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Multi User Mode
Personalizing a new user
Multi User Mode allows individuals to customize
settings and switch to their saved settings easily.
Up to 4 people can use the unit with their own
settings.
1 Press [HOME].
2 Press the coloured button that indicates
new user personalization.
3 Select an item and change the settings
according to the indications.
The following settings can be personalized:
≥ The user icon
≥ The wallpaper of HOME menu
≥ The audio and picture settings (> 28, 30)
The following items can be set.
Input
Personalize a user name.
Nickname
Personalize a user icon.
Select from Illustrations
The image can be selected from
HOME
User 1
A
Network
Blu-ray Disc Player
prepared illustrations.
Select Icon
Create from Photos
Photos
Setup
Music
You can select a photo in
recording media as an icon.
(> 28, “Icon Registration”)
Videos
User 1
Register
2nd user
B
Personalize a background of the
HOME menu.
Select
Wallpaper
≥ In addition to default
A
B
The user name and icon currently selected
Personalize a new user and switch between
users with coloured buttons.
wallpapers, you can select a
photo in recording media as a
wallpaper. (> 28, “Wallpaper”)
4 Select “Confirm” and press [OK].
To change the personalized user information
Select “Edit User Information” from Setup menu.
(> 36)
Switching the user
Press the coloured buttons in the HOME menu
to switch to the user corresponding to the
button.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Playback
Search/Slow motion
Search
1 Insert the media.
While playing, press [SEARCH6] or
Playback starts depending on the media.
2 Select the item to play and press [OK].
Repeat this procedure if necessary.
[SEARCH5].
Slow motion
While paused, press [SEARCH5].
The speed increases up to 5 steps.
≥ Music, MP3, etc.: The speed is fixed to a single
step.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
playback to protect the unit’s motor, your TV screen and so
on.
≥ MKV/Xvid: Successive play is not possible.
≥ It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
≥ Press [1PLAY] to revert to normal playback
speed.
≥ To save on electricity, this unit is turned off automatically if
there is no button operation for about 30 minutes when not
playing back (such as when paused or displaying the
menu, displaying still pictures, etc.).
Skip
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
Operations during playback
The following functions may not work depending
on the media and contents.
Frame-by-frame
While paused, press [1] (;1).
≥ Press and hold to change in succession
forward.
Stop
≥ Press [1PLAY] to revert to normal playback
speed.
Press [∫STOP].
The stopping point is memorized.
Resume play function
Changing audio
Press [AUDIO].
Press [1PLAY] to restart from this point.
≥ The point is cleared if the media is removed.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
You can change the audio channel number or
soundtrack language, etc.
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart
play.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Displaying menus and playback
information
Enjoying 3D video and photos
Preparation
Connect this unit to a 3D compatible TV.
(> 11, 12)
Show top menu/pop-up menu
≥ Perform the necessary preparations for the TV.
≥ Play back following the instructions displayed
on the screen.
Press [TOP MENU] or [POP-UP MENU].
Select the item and press [OK].
≥ 3D Settings (> 29, 32)
Show the status messages
While playing, press [STATUS].
≥ Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue use
and rest your eyes.
≥ 3D video might not output the way it is set in “HDMI Video
Format” and “24p(4K)/24p Output” [BDT330] / “24p Output”
[BDT230] (> 30).
≥ When playing back 3D photos from “Photos” screen, select
from the “3D” list. (Still pictures in “2D” are played back in
2D.)
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or will disappear from the screen.
≥ Depending on media and contents, the display
may change or may not appear.
If “2D” and “3D” indications are not displayed, press the
red button on the remote control to switch the view of
playback contents.
e.g., BD-Video
A
B
BD-Video
Play
T1 C1 0:05.14
0:20.52
D
C
A
B
C
D
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
Current position
Total time
e.g., JPEG
Date
Size
11.12.2007
500X375
Manufacturer
Equipment
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Enjoying BD-Live
Slideshow
With “BD-Live” discs, you can enjoy bonus
contents that use Internet access.
Play a slideshow of photos and adjust various
settings during the playback.
For this BD-Live function, connection of a USB
device is necessary along with Internet
connection.
≥ When USB devices are connected to both USB
ports, disconnect both of them first, and then
connect only the one you want to use.
1 Insert the media.
2 Select “Photos”.
3 Select an item and press the green button.
The following items can be set.
1 Perform network connection and settings.
Start the slideshow.
Start
Slideshow
You can display still pictures in
the selected folder one by one
at a constant interval.
(> 14, 15)
2 Connect a USB device with 1 GB or more
free space.
Interval
Change the display interval.
≥ The USB device is used as the local
storage.
Transition
Effect
Select the effect when sliding
pictures.
3 Insert the disc.
Set whether to repeat the
slideshow.
Repeat Play
∫ Deleting data on the USB device
Select “USB Management” in the HOME menu
(> 18), then select “BD-Video Data Erase” and
press [OK].
≥ Still pictures displayed as “
” cannot be played back
with this unit.
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ “BD-Live Internet Access” may need to be changed for
certain discs (> 34).
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
22
VIERA Connect
(Enjoying Internet
Service)
≥ When playing content in the media, VIERA Connect
cannot be accessed by pressing [INTERNET].
≥ In the following cases, settings are possible using the
Setup menu items.
– When restricting the use of VIERA Connect
(> 34, “Network Service Lock”)
– When correcting the displayed time
VIERA Connect allows you to access some
specific websites supported by Panasonic, and
enjoy Internet contents such as photos, videos,
etc. from VIERA Connect Home screen.
(> 34, “Time Zone”, “Summer Time”)
≥ If using slow Internet connection, the video may not be
displayed correctly. A high speed Internet service with a
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware when a firmware update
notice is displayed on the screen. If the firmware is not
updated, you may not be able to use VIERA Connect
function properly. (> 16)
≥ VIERA Connect Home screen is subject to change without
notice.
≥ The services through VIERA Connect are operated by
their respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
VIERA Connect provides a variety of
selected Internet services such as the
following.
≥ Online movie rental service
≥ Video browsing service
≥ Some features of websites or content of the service may
not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries
and may be presented in specific languages.
XXXXX
*
X
XXXXXXXX
XXXXXX
XXXXX
XXXXXXXXXXXXXXXXXXXX
MORE
XXXXXXXXXXX
XXXXXX, XXXX
BACK
XXXX
39°C
XXXX
XXXXXXXX
Market
Internet
*
Images are for illustration purposes, contents may change
without notice.
Preparation
≥ Network connection (> 14)
≥ Network setting (> 15)
1 Press [INTERNET].
2 Select the item and press [OK].
To exit from VIERA Connect
Press [HOME].
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Home Network feature
Using MiracastTM
You can enjoy the content you are viewing on a
Miracast-compatible smartphone, etc. on the big
screen of your TV.
≥ Compatible with AndroidTM device, ver. 4.2 and
above and Miracast certified.
For information on whether the smartphone,
etc. supports Miracast, contact the
manufacturer of the device.
Miracast compatible
Player
device
1 Press [MIRACAST].
2 Operate the Miracast compatible device.
≥ On the device, enable Miracast and select
this unit (DMP-BDT330 or DMP-BDT230)
as the device to be connected.
For details, refer to the instructions
supplied with the device.
To exit from Miracast
Press [HOME].
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
24
1 Press [HOME].
Playing back contents on the
DLNA server
2 Select “Network”.
3 Select “Home Network”.
4 Select “DLNA Client”.
You can share photos, videos and music stored in
the DLNA Certified media server (PC with
Windows 7 installed, smartphone, etc.) connected
to your home network, and enjoy the contents
with this player.
≥ The list can be updated by pressing the red
button on the remote control.
≥ The connection method can be switched to
Wi-Fi Direct by pressing the green button
on the remote control.
You can also enjoy viewing the video and photos
recorded in Panasonic DLNA compatible
recorders (DIGA).
Refer to our website about the sales area, etc.
(> 26)
5 Select the equipment and press [OK].
6 Select the item to play and press [OK].
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
≥ About support format of DLNA (> 44).
≥ Before using the DLNA feature, be sure to
configure the DLNA server on your Home
Network.
≥ Control Panel is
displayed once the
playback starts.
e.g.,
EXIT
Press [OK] if the
Control Panel is not
displayed, and press
[RETURN] to hide
the Control Panel.
Player
To exit from Home Network
Server
Press [HOME].
Preparation
1
Perform network connection (> 14) and
network settings (> 15) of this unit.
Perform Home Network settings of the
connected equipment.
2
When connected to other than DIGA,
3
Add the contents and folder to the libraries of
the Windows Media® Player or the
smartphone, etc.
≥ Playlist of Windows Media® Player can play
back only the contents that are stored in the
libraries.
When connected to DIGA,
Register this unit to your DIGA.
3
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
25
1 Press [HOME].
2 Select “Network”.
Using the Digital Media Controller
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to play back contents
from DLNA server on the Renderer (this unit).
3 Select “Home Network”.
4 Select “Media Renderer”.
5 Select “Home Network” or “Wi-Fi Direct”
Possible applications:
and press [OK], then follow the
indications on the screen.
6 Operate the DMC compatible devices.
*
Server
To exit from Media Renderer screen
Renderer
Press [HOME].
*
Controller
About DLNA and Media Renderer
For more details, refer to the following website and the
operating instructions for each of the equipment.
(This site is in English only.)
≥ Wi-Fi Direct connection while using Home Network feature
is only temporary, and the network connection method
returns to the original setting when exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
*
Server
i
Controller
Renderer
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in grey on the display cannot be played
back by this unit.
*
DMC compatible software should be installed.
≥ This unit can be played back via connected equipment only
when controlled using DMC.
Preparation
Perform steps 1 and 2. (> 25)
3
Add the contents and folder to the libraries of
the Windows Media® Player or the
smartphone, etc.
≥ Playlist of Windows Media® Player can play
back only the contents that are stored in the
libraries.
4
Perform the “Remote Device Settings”.
(> 34)
≥ You can register up to 16 devices.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
26
“HDMI CEC”
USB Sharing
What is “HDMI CEC” (Consumer Electronics
Control)?
“HDMI CEC” (Consumer Electronics Control)
is a convenient function which links the
operations of this unit and other “HDMI CEC”
compatible device.
This function allows you to copy content
between the following media.
SD card
You can use this function by connecting the
equipment with an HDMI cable*.
See the operating instructions for connected
equipment for operational details.
USB1/
USB2
USB2/
USB1
*
[BDT330] Only when connecting via an HDMI AV OUT
MAIN terminal on this unit.
Preparation
1
2
3
Set “HDMI CEC” to “On” (> 35).
(The default setting is “On”.)
Preparation
≥ Insert the media. (> 17)
Set the “HDMI CEC” operations on the
connected equipment (e.g., TV).
Turn on all “HDMI CEC” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDMI CEC”
function works properly.
1 Press [USB SHARING].
2 Select the copy source (e.g., USB1) and
press [OK].
3 Select the folder or file to be copied and
Repeat this procedure when the
connections or settings are changed.
press the red button on the remote
control.
≥ Press the red button on the remote control
again to cancel.
Automatic input switching
Power on link
4 Press [OK].
5 Select the copy destination (e.g., USB2)
and press [OK].
When play starts on the unit, the TV will
automatically switch the input channel and the
screen of this unit will be displayed.
Additionally when the TV is off, the TV will
automatically turn on.
6 Select “Yes” on the confirmation screen
and press [OK].
≥ When the destination contains a folder or
file with the same name, you can change
the option for resolving the conflict by
pressing [OPTION].
Power off link
All connected equipment compatible with “HDMI
CEC”, including this unit, automatically turns off
when you switch the TV off.
≥ You cannot set the media formatted to NTFS as a copy
destination.
≥ Copying of files in all formats is not guaranteed.
≥ Panasonic does not accept any responsibility for damages
directly or indirectly due to any type of problems that result
in loss of copying content (data), and does not guarantee
any content if copying does not work properly.
≥ This unit supports the “HDMI CEC” (Consumer Electronics
Control) function. However, operation cannot be
guaranteed on all HDMI CEC devices.
≥ The recording and playback of content on this or any other
device may require permission from the owner of the
copyright or other such rights in that content. Panasonic
has no authority to and does not grant you that permission
and explicitly disclaims any right, ability or intention to
obtain such permission on your behalf. It is your
responsibility to ensure that your use of this or any other
device complies with applicable copyright legislation in
your country. Please refer to that legislation for more
information on the relevant laws and regulations involved
or contact the owner of the rights in the content you wish to
record or playback.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Settings
∫ Repeat Play
Option menu
Select the item that you want to repeat.
≥ The items displayed differ depending on the
type of media.
A variety of playback operations and settings can
be performed from this menu.
Available options differ depending on the playing
contents and the condition of the unit.
≥ Select “Off” to cancel.
∫ Random
Select whether or not to play random.
About Multi User Mode
∫ Start Slideshow
Start the slideshow.
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu.
∫ Status
Please refer to page 19 for details about user
registration and switching.
Show the status messages.
∫ Rotate RIGHT
∫ Rotate LEFT
Rotate the still picture.
1 Press [OPTION].
≥ When playing music, select “Playback
∫ Wallpaper
Settings” and press [OK].
Set the still picture to the wallpaper of HOME
menu. (> 18)
e.g., BD-Video
Operation Menu
∫ Icon Registration
Soundtrack
1ENG Dolby TrueHD ...
Set the still picture as your user icon. (> 19)
Subtitle
Angle
–
Repeat Play
Status
Off
∫ Video
Primary Video
Secondary Video
Top Menu
1MPEG-4 AVC
The recording method of original video appears.
Pop-up Menu
∫ Primary Video
The recording method of original primary video
appears.
2 Select an item and change the settings.
∫ Secondary Video
To exit the screen
Press [OPTION].
Select on/off for images. The
recording method of original
video appears.
≥ During search/slow motion
Video
Regarding Language : (> 44)
or frame-by-frame, only the
primary video is displayed.
Select on/off for audio and the
language.
Soundtrack
Operation Menu
∫ Soundtrack
Show or change the soundtrack.
∫ Top Menu
Display Top Menu.
∫ Audio channel
Select the audio channel number.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Subtitle
Change the subtitle settings.
∫ Menu
Display Menu.
∫ Angle
Select the number of the angle.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Picture Settings
Sound Settings
∫ Dialogue Enhancer
The volume of the centre channel is raised to
make dialog easier to hear.
≥ This function is effective for multi-channel audio
from the HDMI AV OUT terminal only when
“Digital Audio Output” is set to “PCM” (> 31).
∫ Picture Mode
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in
“Picture Adjustment”.
∫ Picture Adjustment
Specific picture quality settings can be changed.
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
≥ If the video is disrupted when “Auto” is
selected, select either “Video” or “Film”
depending on the material to be played back.
3D Settings
∫ Signal Format
Original
Keep original picture format.
3D picture format comprising
of left and right screens.
Side by side
∫ 24p
Movies and other material recorded on
DVD-Video at 24p are output at 24p.
≥ This works only in the following cases:
– [BDT330] when “24p(4K)/24p Output” is set to
“24p(4K)” or “24p” (> 30) and the disc
recorded at a rate of 60 fields per second is
played back.
Converts 2D pictures to 3D
effect.
2D to 3D
∫ Distance
Set the amount of depth perception.
∫ Graphic Display Level
– [BDT230] when “24p Output” is set to “On”
(> 30) and the disc recorded at a rate of
60 fields per second is played back.
≥ This may not work with the PAL contents.
3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
∫ Reset to Default Picture Settings
Return picture settings to the factory preset.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
29
∫ HDMI Output
Press [OK] to show the following settings:
Setup menu
¾HDMI Video Format
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
Some items in the Setup menu are common to
the Option menu. You can get the same effect
with both menus.
The items supported by the connected devices
are indicated on the screen as “¢”. When any
item without “¢” is selected, the images may be
distorted.
≥ If “Automatic” is selected, the best suited
output resolution to the connected TV is
automatically selected.
About Multi User Mode
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
TV). If this unit is connected to an HDTV
through other equipment, the other equipment
must also be 1080p compatible.
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu.
Please refer to page 19 for details about user
registration and switching.
1 Press [HOME].
2 Press [OK] to select “Setup”.
3 Select “Player Settings”.
¾24p(4K)/24p Output [BDT330]
This setting is for selecting the output method
for content recorded in 24p*1, such as movies.
Outputs signals by upconverting
them to 4K*2.
24p(4K)
Player Settings
Picture Mode
Normal
Picture
Sound
3D
24p
Outputs in 24.
Picture Adjustment
HDMI Output
≥ Connect the compatible TV for each (4K or
1080/24p) output to the HDMI AV OUT MAIN
terminal of this unit.
≥ “24p(4K)” works only when playing back in
2D.
Language
Network
Ratings
System
OK
RETURN
≥ When playing DVD-Video, set this setting to
“24p(4K)” or “24p”, and then “24p” in “Picture
Settings” (> 29) to “On”.
4 Select an item and change the settings.
≥ When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
To exit the screen
Press [HOME].
¾24p Output [BDT230]
When this unit is connected to a TV supporting
1080/24p output, movies and other material
recorded at 24p*1 are output at 24p.
≥ When playing DVD-Video, set to “On” and
then set “24p” in “Picture Settings” (> 29) to
“On”.
Picture
∫ Picture Mode
(> 29)
∫ Picture Adjustment
(> 29)
≥ When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
*1
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.
*2
A high resolution image/display technology of
approximately 4000 (width) k 2000 (height) pixels.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
30
¾HDMI Colour Mode
This setting is for selecting colour-space
conversion of the image signal.
Sound
∫ Dialogue Enhancer
(> 29)
¾Deep Colour Output
∫ Dynamic Range Compression
This setting is for selecting whether to use Deep
Colour output when a TV that supports Deep
Colour is connected.
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ “Automatic” is effective only when playing
Dolby TrueHD.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
∫ Digital Audio Output
¾HDMI(SUB) Output Mode [BDT330]
Press [OK] to show the following settings:
Set to output the video from the HDMI AV OUT
SUB terminal or not.
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
≥ Select “PCM”, when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥ Not making the proper settings may result in
noise.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
¾HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥ Select “Off” when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an OPTICAL
terminal.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
31
∫ PCM Down Conversion
3D
Select how to output audio with a sampling
frequency of 96 kHz for the PCM output from the
OPTICAL.
≥ If “On” is selected, the signals that are
converted to 48 kHz are output.
≥ If “Off” is selected, and the connected
equipment does not support 96 kHz, the sound
will not be output normally.
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
∫ 3D AVCHD Output
Select the output method of 3D AVCHD videos.
∫ 3D Playback Message
≥ Signals are converted to 48 kHz despite the
settings in the following cases:
– when the signals have a sampling frequency
of 192 kHz
Set to display or hide the 3D viewing warning
screen when playing back the 3D compatible
video software.
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to
“On”
∫ Graphic Display Level
(> 29)
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
≥ The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch)
before it is output.
≥ This function works when the following
conditions are met:
– Audio is output from the HDMI AV OUT
terminal.
– Audio recorded at 96 kHz or lower is output.
– “Digital Audio Output” is set to “PCM” when
audio other than PCM is output.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Language
Network
∫ Soundtrack Preference
∫ Easy Network Setting (> 15)
Choose the language for audio.
≥ If “Original” is selected, the original language of
each disc will be selected.
≥ Enter a code (> 44) when you select “Other
¢¢¢¢”.
∫ Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
¾LAN Connection Mode
Select the LAN connection method.
∫ Subtitle Preference
Choose the language for the subtitle.
≥ If “Automatic” is selected and the language
selected for “Soundtrack Preference” is not
available, subtitles of that language will
automatically appear if available on that disc.
≥ Enter a code (> 44) when you select “Other
¢¢¢¢”.
≥ Select “Wireless Master” when you make a
direct wireless connection between this unit
and a Home Network device. Internet
connection is not available when this item is
selected.
¾Wireless Settings
This allows the wireless router and connection
settings to be set. Current connection settings
and connection state can be checked.
Press [OK] to show the following settings:
∫ Menu Preference
Choose the language for the disc menus.
≥ Enter a code (> 44) when you select “Other
¢¢¢¢”.
Connection Setting
The wireless router connection wizard will be
displayed.
[Except[South[East[Asia]
∫ Subtitle Text
Select a suitable item according to the language
used for MKV/Xvid subtitles text.
≥ This item is displayed only after playing back a
file.
Double Speed Mode Setting (2.4GHz)
Set the connection speed for a 2.4 GHz
wireless format.
≥ If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
[For[South[East[Asia]
∫ On-Screen Language
Choose the language for menus and on-screen
messages.
¾IP Address / DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Press [OK] to show the respective setting.
¾Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
33
¾Network Service Settings (> 23)
(VIERA Connect)
Press [OK] to show the following settings:
Registration Type
Automatic
Allow connection to all the
equipment accessing this
unit.
Time Zone
Set the unit’s time to match your location.
≥ Some VIERA Connect contents require the
time zone to be set. Set the time zone if
necessary.
Set the permission for
individual equipment
connections accessing this
unit.
Manual
Remote Device List
Summer Time
Registering/deregistering of the displayed
equipment can be performed when “Manual”
in “Registration Type” is selected.
Select “On” when using summer time.
[Except[South[East[Asia]
¾Network Drive Connection
¾BD-Live Internet Access (> 22)
It is possible to access the shared folder of
equipment not compatible with DLNA, such as
the Windows XP operating system, and play
back video, still pictures, and music on this unit.
For the setting and operation method of
connected equipment, refer to the following
website.
You can restrict Internet access when BD-Live
functions are used.
≥ If “Limit” is selected, Internet access is
permitted only for BD-Live contents which
have content owner certificates.
(This site is in English only.)
Ratings
¾Remote Device Settings (> 26)
The following items use the same password.
Don’t forget your password.
Press [OK] to show the following settings:
Remote Device Operation
Enable to operate by DMC.
≥ If “On” is selected, “Quick Start” will be
activated.
∫ DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
∫ BD-Video Ratings
Set an age limit of BD-Video play.
Device Name Entry
Set the name of this unit to be displayed on
the connected equipment.
∫ Network Service Lock
You can restrict the usage of VIERA Connect.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
34
¾TV System
Perform the setup so it matches the TV System
of the connected TV.
System
∫ Easy Settings
You can execute basic settings.
¾Screen Saver Function
This is to prevent image retention on the
screen.
≥ When this is set to “On”:
∫ TV Settings
Press [OK] to show the following settings:
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
¾TV Aspect
Set to match the type of TV connected.
When connected to a 4:3 aspect TV and playing
16:9 ratio image:
The sides are
cut off so the
picture fills
¾On-Screen Messages
Choose whether to show status messages
automatically.
4:3 Pan & Scan the screen.
When playing BD-Video,
video is output as “4:3
Letterbox”.
¾HDMI CEC
Set to use “HDMI CEC” function when
connected via HDMI cable to a device that
supports “HDMI CEC”.
Black bands
appear at
≥ Select “Off” when you do not want to use
“HDMI CEC”.
4:3 Letterbox
the top and
bottom of
the picture.
When connected to a 16:9 widescreen TV and
playing 4:3 ratio image:
Video is displayed as a 4:3
16:9
ratio image in the centre of
the screen.
Video is displayed as a
horizontally stretched 16:9
image.
16:9 full
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
35
∫ Unit Settings
∫ Firmware Update (> 16)
Press [OK] to show the following settings:
Press [OK] to show the following settings:
¾Mixed Data Disc Option
¾Automatic Update Check
Select the playback contents on discs with both
data files and Video.
≥ If “MP3/JPEG/MKV” is selected, the video
menu function (except MKV/Xvid) cannot be
played back.
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
¾Update Now
You can update the firmware manually if a
firmware update is available.
≥ If “BDAV/AVCHD” is selected, data file cannot
be played back.
¾Front Panel Display
∫ System Information
Changes the brightness of the unit’s display.
≥ If “Automatic” is selected, the display is set to
bright and only dimmed during playback.
Press [OK] to show the following settings:
¾Software Licence
¾Blue LED [BDT330]
Information about the software used by this unit
is displayed.
Set whether to light the blue LED in the centre
of this unit when turned ON.
¾Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
¾HDMI(SUB) V.OFF LED Control [BDT330]
Set to light the HDMI (SUB) V.OFF LED or not.
(This will light when “HDMI(SUB) Output Mode”
(> 31) is set to “V.OFF(Video Off)”.)
∫ Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, on-screen language [For[South[East[Asia],
etc.
¾Edit User Information
Change the user information registered in the
HOME menu.
∫ Start-up Banner
Select whether to display the banner after turning
on this unit. (> 18)
∫ Quick Start
Speed of start-up from standby mode is
increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to “Off”.
(About the power consumption > 43)
∫ Remote Control
Change the remote control code if other
Panasonic products react to this remote control.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Reference
The remote control does not work properly.
Troubleshooting guide
¾
Change the batteries in the remote control.
(> 5)
Before requesting service, please perform the
following checks.
If the problem remains unresolved, consult
your dealer for instructions.
¾
The remote control and this unit are using
different codes.
If “SET ” is displayed on the unit’s display
when a button is pressed on the remote
control, change the code on the remote
control.
Press and hold [OK] and the displayed
number (“”) for more than 5 seconds.
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are
enjoying the latest technology. (> 16)
The TV tuner mode is not displayed when the
TV is switched on.
The following do not indicate a problem with
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
¾
This phenomenon may occur, depending on
the TV setting, when “Quick Start” is set to
“On”.
¾
Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
∫ Unit does not respond to remote
control or front panel buttons.
Disconnect the AC mains lead, wait 1 minute,
then reconnect the AC mains lead.
You have forgotten your ratings password.
You want to cancel the ratings level.
∫ Cannot eject disc.
¾
1
2
The ratings level returns to the factory preset.
Turn the unit on.
1
Turn the unit on.
2
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “06 FTO” is displayed on the
unit’s display.
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “03 VL” is displayed on the unit’s
display.
3
4
3
4
Press [OK].
Press [OK].
This unit does not recognize the USB
connection correctly.
General operation
¾
Disconnect and reconnect the USB cable. If it
still does not recognize the connection, turn
this unit off and on again.
USB devices may not be recognized by this
unit when connected using the following :
– a USB hub
To return to the factory preset.
¾
Select “Yes” in “Default Settings” in the Setup
menu. (> 36)
¾
To return all settings to the factory preset.
¾
Reset the unit as follows:
1
2
Turn the unit on.
– a USB extension cable
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “08 FIN” is displayed on the unit’s
display.
¾
¾
If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
When you connect a USB HDD, use the right
USB port (USB2). (> 17)
3
4
Press and hold [OK] for more than 5 seconds.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Video is not output. [BDT330]
Picture
¾
Video from the HDMI AV OUT SUB terminal
is not output when the “HDMI(SUB) Output
Mode” is set to “V.OFF(Video Off)”. (> 31)
The images from this unit do not appear on
the TV.
Picture is distorted.
Video is not output in high-definition.
¾
An incorrect resolution is selected in “HDMI
Video Format”. Reset the setting as follows:
Turn the unit on.
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “04 PRG” is displayed on the
unit’s display.
¾
Confirm that “HDMI Video Format” in the
Setup menu is set properly. (> 30)
1
2
3D video is not output.
¾
¾
Connect to a full high-definition TV.
Is there a non-3D compatible amplifier/
receiver connected between this unit and a
TV? (> 12)
3
4
¾
[BDT330] If there is a non-3D compatible
amplifier/receiver connected to the HDMI AV
OUT SUB terminal, set the “HDMI(SUB)
Output Mode” to “V.OFF(Video Off)”. (> 12)
Are the settings on this unit and the TV
correct? (> 21)
Is the amplifier/receiver that is connected
between this unit and TV on?
Depending on the connected TV, the video
being played back might switch to 2D video
due to changes in resolution etc. Check the
3D setting on the TV.
Press and hold [OK] for more than
5 seconds.
Set the item again. (> 30)
¾
¾
¾
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output properly,
select “Yes” in “Default Settings” and make
proper settings. (> 36)
¾
The unit and TV are using different video
systems.
1
2
Turn the unit on.
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “05 P/N” is displayed on the unit’s
display.
3D video is not output correctly as 2D.
¾
Select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 32, “3D
BD-Video Playback”)
3
4
¾
Discs that have recorded titles with Side by
side (2 screen structure) and that can be
enjoyed in 3D are played back in accordance
with the settings of the TV.
Press and hold [OK] for more than
5 seconds.
The system switches from PAL to NTSC or
vice versa.
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾
¾
The system used on the disc doesn’t match
your TV.
– PAL discs cannot be correctly viewed on an
NTSC TV.
When “3D BD-Video Playback” in the Setup
menu is set to “Automatic”, images may not
be output depending on the connection
method. After removing the disc from this
unit, select “Set before play” in the Setup
menu, and select “2D Playback” in the setup
screen displayed when playing 3D discs.
(> 32)
¾
¾
Confirm the “TV Aspect” is set properly.
(> 35)
Adjust the aspect setting on the TV.
¾
[BDT330] When outputting in 24p (4K), images
may be distorted depending on the HDMI
cable. Use an HDMI cable that supports 4K
output.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Audio
Playback
Cannot switch audio.
Disc cannot be played.
¾
The audio cannot switch, if “Digital Audio
Output” is set to “Bitstream”. Set “Digital
Audio Output” to “PCM”. (> 31)
¾
¾
The disc is dirty. (> 5)
The disc is not finalized. (> 7)
Still pictures (JPEG) do not play back
normally.
Cannot hear the desired audio type.
¾
The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
¾
Check the connections and the “Digital Audio
Output” settings. (> 12, 31)
[BDT330] When connecting this unit to a TV
via an HDMI AV OUT MAIN and to an
amplifier/receiver via an HDMI AV OUT SUB,
set “HDMI(SUB) Output Mode” to
¾
I can’t play back BD-Live.
¾
¾
¾
Confirm that this unit is connected to the
broadband Internet. (> 14)
Confirm the “BD-Live Internet Access”
settings. (> 34)
Confirm a USB device is connected to the
USB port. (> 17)
“V.OFF(Video Off)”. (> 12)
¾
To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (> 31)
There is no sound coming out from the TV.
[BDT330]
¾
Audio may not output from the TV when the
amplifier/receiver is connected to the HDMI
AV OUT SUB, and “HDMI(SUB) Output
Mode” (> 31) is set to “V.OFF(Video Off)”. In
such a case, output audio from the amplifier/
receiver. To output audio from the TV, set the
“HDMI(SUB) Output Mode” to “Normal”.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Network
I can’t connect to the network.
¾
Confirm the network connection and settings.
(> 14, 15, 33)
¾
There may be obstacles that prevent the unit
from detecting your home network. Bring the
unit and the wireless router closer to each
other. This unit may be able to detect your
network name (> 16, “SSID”).
¾
Check the operating instructions for each
device and connect accordingly.
Cannot play current title.
¾
Confirm the network connection and settings.
(> 14, 15, 33)
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾
Higher transfer rate router such as 802.11n
(2.4 GHz or 5 GHz) wireless router may solve
the problem. If you use 802.11n (2.4 GHz or
5 GHz) wireless router, it is necessary to set
the encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
On the “Wireless Settings” screen (> 33), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
¾
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 15) again.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Messages
On the unit’s display
NET
While connecting to a network.
Check the following when messages or service
numbers are displayed on the screen or unit’s
display.
¾
No PLAY
¾
There is a viewing restriction on a BD-Video
or DVD-Video. (> 34)
The media is dirty or badly scratched. The
unit cannot play.
On the TV
Cannot play.
¾
¾
You inserted an incompatible disc.
Cannot play on this unit.
REMOVE
The USB device is drawing too much power.
Remove the USB device.
¾
¾
You tried to play a non-compatible image.
Re-insert the media.
¾
No disc inserted.
The disc may be upside down.
SET
¾
(“ ” stands for a number.)
¾
The remote control and this unit are using
different codes. Change the code on the
remote control.
$ This operation is not available.
¾
Some operations are unsupported by the
unit. (For example, reverse slow motion, etc.)
Press and hold [OK] and
the indicated number
button at the same time
for more than 5 seconds.
IP address is not set.
¾
The “IP Address” in “IP Address / DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Gateway
Address”. (Select the automatic address
acquisition if necessary.)
U59
¾
Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Select a position with good ventilation when
installing the unit.
The wireless access point currently has a low
network security setting. It is recommended
to change to a higher setting.
¾
Set a stronger network security level referring
to the wireless router operating instructions.
H or F
(“ ” stands for a number.)
¾
¾
There is something unusual.
Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
1
Disconnect the plug from the household
mains socket, wait a few seconds, then
reconnect it.
2
Press [Í/I] to turn the unit on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
41
START
The system is being restarted during the
¾
firmware update. Please do not turn off the
unit.
UPD/
(“ ” stands for a number.)
¾
The firmware is being updated.
Please do not turn off the unit.
FIN
¾
¾
The firmware update is complete.
Copying is complete.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Specifications
File format
File
format
Extension
Reference
General
This unit supports ID3
tags, but only titles, artist
names and album names
can be displayed.
Signal system
PAL/NTSC
MP3
“.MP3”, “.mp3”
Operating
i5 oC to i35 oC
temperature range
≥ MOTION JPEG and
Progressive JPEG are
not supported.
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
Operating humidity 10 % to 80 % RH (no condensation)
range
Digital audio output Optical digital output (Optical
JPEG “.JPG”, “.jpg”
terminal)
HDMI AV output
Output connector:
[BDT330]
Type A (19 pin) 2 system
[BDT230]
“.MKV”, “.mkv”
≥ [Except[South[East[Asia]
The video file and
Type A (19 pin) 1 system
[Except[South[East[Asia]
subtitles text file are
inside the same folder,
and the file names are
the same except for
the file extensions.
≥ Some MKV/Xvid files
may not play back,
depending on the
MKV
Xvid
Subtitles text file
“.SRT”, “.srt”, “.SSA”,
“.ssa”, “.ASS”, “.ass”
SD card slot
USB slot
1 system
USB2.0
2 system
“.AVI”, “.avi”
Ethernet
10BASE-T/100BASE-TX 1 system
[Except[South[East[Asia]
Subtitles text file
Wireless LAN
Standard Compliance:
IEEE802.11 a/b/g/n
“.SRT”, “.srt”, “.SUB”,
“.sub”, “.TXT”, “.txt”
video resolution and
frame rate condition.
Frequency range:
2.4 GHz/5 GHz band
Maximum sampling rate:
192 kHz/24 bit
FLAC “.FLAC”, “.flac”
Security: WPATM/WPA2TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK), WEP
(64 bit/128 bit)
Maximum sampling rate:
192 kHz/24 bit
WAV
MPO
“.WAV”, “.wav”
“.MPO”, “.mpo”
3D still picture
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/320 kbps
LASER Specification Class 1 LASER Product
Wave length: 785 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the safety
protection
“.M4A”, “.m4a”,
“.AAC”, “.aac”
AAC
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/355 kbps
WMA “.WMA”, “.wma”
Power supply
[For[Australia[and[New[Zealand]
AC 220 V to 240 V, 50 Hz
[Except[Australia[and[New[Zealand]
AC 220 V to 240 V, 50 Hz/60 Hz
≥ With certain recording states and folder structures, the play
order may differ or playback may not be possible.
Power consumption Approx. 18 W
Power consumption Approx. 0.5 W
in standby mode
Power consumption [BDT330]
in quick start
standby mode
Approx. 6 W
[BDT230]
Approx. 5.5 W
Dimensions
(WkHkD)
Including the
projecting parts
[BDT330]
430 mmk41 mmk184 mm
[BDT230]
430 mmk38 mmk184 mm
Mass
[BDT330]
Approx. 1.6 kg
[BDT230]
Approx. 1.4 kg
≥ Specifications are subject to change without notice.
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Audio information
Display languages list
The audio output differs depending on which
terminals are connected to the amplifier/receiver,
and the settings on the unit. (> 31, “Digital Audio
Output”)
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
Display Language Display Language Display Language
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English JPN
Japanese ARA
Chinese HIN
Korean PER
Malay IND
Arabic
French CHI
Hindi
German KOR
Italian MAL
Spanish VIE
Dutch THA
Swedish POL
Norwegian CES
Danish SLK
Portuguese HUN
Russian FIN
Persian
Indonesian
Maori
Vietnamese MRI
Thai BUL
Bulgarian
Romanian
Greek
Polish RUM
Czech GRE
Slovak TUR
Hungarian
“Digital Audio Output”
Terminal
Turkish
Others
“Bitstream”
“PCM”
Finnish
BD-Video :
HDMI AV Outputs using
7.1ch PCM*1*2
DVD-Video :
5.1ch PCM
OUT*3
original audio*1
Output
channel
Dolby Digital/
Language code list
Down-mixed 2ch
PCM
OPTICAL DTS Digital
Surround
Language Code Language Code Language Code
*1
When “BD-Video Secondary Audio” is set to “On”, the
audio will be output as Dolby Digital, DTS Digital Surround
or 5.1ch PCM.
[BDT230] The maximum possible number of Dolby sound is
5.1ch PCM.
When “DTS Neo:6” is set to “Cinema” or “Music”, 2ch
(2.1ch) audio can be expanded to 7ch (7.1ch) and output.
(> 32)
Abkhazian:
Afar:
Afrikaans:
Albanian:
Amharic:
Arabic:
Armenian:
Assamese:
Aymara:
6566 Gujarati:
6565 Hausa:
6570 Hebrew:
8381 Hindi:
7185 Rhaeto-Romance:
7265
8277
8279
8285
8377
8365
7387 Romanian:
7273 Russian:
7285 Samoan:
7383 Sanskrit:
*2
*3
6577 Hungarian:
6582 Icelandic:
7289 Indonesian: 7378 Scots Gaelic: 7168
6583 Interlingua:
6589 Irish:
7365 Serbian:
8382
7165 Serbo-Croatian:8372
Azerbaijani: 6590 Italian:
7384 Shona:
7465 Sindhi:
8378
8368
Bashkir:
Basque:
6665 Japanese:
6985 Javanese:
7487 Singhalese: 8373
Bengali; Bangla:
Kannada:
Kashmiri:
7578 Slovak:
7583 Slovenian:
7575 Somali:
7589 Spanish:
8375
8376
8379
6983
Supported format for DLNA
6678
Bhutani:
Bihari:
6890 Kazakh:
6672 Kirghiz:
6682 Korean:
6671 Kurdish:
7789 Laotian:
≥ File formats that are not supported by your
Breton:
7579 Sundanese: 8385
DLNA server cannot be played.
Bulgarian:
Burmese:
7585 Swahili:
7679 Swedish:
7665 Tagalog:
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
Video
Byelorussian: 6669 Latin:
Cambodian: 7577 Latvian, Lettish: 7686 Tajik:
Example of
file extension
Container Video codec Audio codec
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
6765 Lingala:
7678 Tamil:
7684 Tatar:
9072 Lithuanian:
AVCHD
MP4
H.264
H.264
Dolby Digital
AAC
.mts
6779 Macedonian: 7775 Telugu:
.mp4
7282 Malagasy:
6783 Malay:
7771 Thai:
7783 Tibetan:
Dolby Digital
Linear PCM
.mpg
.mpeg
PS
TS
MPEG2
6865 Malayalam: 7776 Tigrinya:
7876 Maltese:
6978 Maori:
7784 Tonga:
7773 Turkish:
7782 Turkmen:
7779 Twi:
7778 Ukrainian:
7865 Urdu:
7869 Uzbek:
MPEG2
H.264
AAC
Dolby Digital
.m2ts
.ts
6979 Marathi:
6984 Moldavian:
7079 Mongolian:
7074 Nauru:
Photo
Format
JPEG
Example of file extension
.jpg
7073 Nepali:
7082 Norwegian: 7879 Vietnamese: 8673
7089 Oriya:
7982 Volapük:
8679
6789
8779
8872
7473
8979
9085
Galician:
Georgian:
German:
Greek:
7176 Pashto, Pushto:8083 Welsh:
Audio
7565 Persian:
6869 Polish:
7065 Wolof:
8076 Xhosa:
Audio codec
MP3
Example of file extension
6976 Portuguese: 8084 Yiddish:
.mp3
.flac
.m4a
.wma
—
Greenlandic: 7576 Punjabi:
Guarani: 7178 Quechua:
8065 Yoruba:
8185 Zulu:
FLAC
AAC
WMA
Linear PCM
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
44
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/
Progressive” are trademarks of Panasonic Corporation and Sony
Corporation.
The software categorized as (3) - (5) are distributed in the hope
that it will be useful, but WITHOUT ANY WARRANTY, without
even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Please refer to the detailed
terms and conditions thereof shown in the Player Settings menu.
Java is a registered trademark of Oracle and/or its affiliates.
At least three (3) years from delivery of this product, Panasonic
will give to any third party who contacts us at the contact
information provided below, for a charge no more than our cost of
physically performing source code distribution, a complete
machine-readable copy of the corresponding source code covered
under GPL V2.0, LGPL V2.1 or the other licenses with the
obligation to do so, as well as the respective copyright notice
thereof.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide patents issued
& pending. DTS-HD, the Symbol, & DTS-HD and the Symbol
together are registered trademarks & DTS-HD Master Audio is a
trademark of DTS, Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
Contact Information: [email protected]
The source code and the copyright notice are also available for
free in our website below.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
Adobe Flash Lite for Digital Home Software licensed by Adobe
Systems Incorporated or its affiliates.
For Adobe Flash Lite for Digital Home Software (“Flash
Software”), please be aware of the following.
(i) You are not permitted to distribute and copy this Flash Software
to any third party,
(ii) You are not permitted to modify the Flash Software and create
derivative works of the Flash Software,
(iii)You are not permitted to decompile, reverse engineer,
disassemble and otherwise reduce the Flash Software to a
human-perceivable form,
(iv)You are not permitted to claim any damages, including direct,
indirect, special, incidental, punitive, and consequential
damages arising out of or in connection with the Flash
Software,
(v) You fully agree that the ownership of the Flash Software is that
of Panasonic Corporation and/or its suppliers or licensors,
(vi)You agree and acknowledge that it is possible that you cannot
access the contents unless you do not obtain and install the
latest version of the Flash Software.
This product is licensed under the AVC patent portfolio license and
VC-1 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the AVC
Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)
decode AVC/VC-1 Video that was encoded by a consumer
engaged in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC/VC-1
Video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
VIERA Connect is a trademark of Panasonic Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
SDXC Logo is a trademark of SD-3C, LLC.
David M. Gay’s dtoa and strtod license
“DVD Logo” is a trademark of DVD Format/Logo Licensing
Corporation.
The author of this software is David M. Gay.
Copyright (c) 1991, 2000, 2001 by Lucent Technologies.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
Permission to use, copy, modify, and distribute this software for
any purpose without fee is hereby granted, provided that this
entire notice is included in all copies of any software which is or
includes a copy or modification of this software and in all copies of
the supporting documentation for such software.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “Miracast”, “WPA”
and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY
EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR,
NEITHER THE AUTHOR NOR LUCENT MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND
CONCERNING THE MERCHANTABILITY OF THIS SOFTWARE
OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,
service marks, or certification marks of the Digital Living Network
Alliance.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
“UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND
SOFTWARE
Android is a trademark of Google Inc.
Unicode Data Files include all data files under the directories
Unicode Software includes any source code published in the
Unicode Standard or under the directories
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance
Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance
Corporation. All rights reserved.
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License,
Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under
the GPL V2.0 and/or LGPL V2.1.
NOTICE TO USER: Carefully read the following legal agreement.
BY DOWNLOADING, INSTALLING, COPYING OR OTHERWISE
USING UNICODE INC.’S DATA FILES (““DATA FILES””), AND/OR
SOFTWARE (““SOFTWARE””), YOU UNEQUIVOCALLY
ACCEPT, AND AGREE TO BE BOUND BY, ALL OF THE TERMS
AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT
AGREE, DO NOT DOWNLOAD, INSTALL, COPY, DISTRIBUTE
OR USE THE DATA FILES OR SOFTWARE.
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1991-2009 Unicode, Inc. All rights reserved.
Distributed under the Terms of Use in
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Permission is hereby granted, free of charge, to any person
obtaining a copy of the Unicode data files and any associated
documentation (the ““Data Files””) or Unicode software and any
associated documentation (the ““Software””) to deal in the Data
Files or Software without restriction, including without limitation the
rights to use, copy, modify, merge, publish, distribute, and/or sell
copies of the Data Files or Software, and to permit persons to
whom the Data Files or Software are furnished to do so, provided
that (a) the above copyright notice(s) and this permission notice
appear with all copies of the Data Files or Software, (b) both the
above copyright notice(s) and this permission notice appear in
associated documentation, and (c) there is clear notice in each
modified Data File or in the Software as well as in the
documentation associated with the Data File(s) or Software that
the data or software has been modified.
THE DATA FILES AND SOFTWARE ARE PROVIDED ““AS IS””,
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO
EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR
ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES,
OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THE DATA FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder
shall not be used in advertising or otherwise to promote the sale,
use or other dealings in these Data Files or Software without prior
written authorization of the copyright holder.”
(1) MS/WMA
This product is protected by certain intellectual property rights of
Microsoft Corporation and third parties. Use or distribution of such
technology outside of this product is prohibited without a license
from Microsoft or an authorized Microsoft subsidiary and third
parties.
(2) FLAC, WPA Supplicant
The software licenses are displayed when “Software Licence” in
the Setup menu is selected. (> 36)
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Limited Warranty (ONLY FOR AUSTRALIA)
Panasonic Warranty
1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its
Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of
Panasonic, the product is found to be faulty within the warranty period.
2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised
Distributors or Dealers and only where the products are used and serviced within Australia or it's territories. Warranty cover only
applies to service carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when
warranty service is requested.
3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as
noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal
domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation,
accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm
activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations),
introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the
product, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product.
4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Cabinet Part(s)
(e) DVD, Blu-ray or Recordable Discs
(b) Video or Audio Tapes
(c) SD cards or USB devices
(d) User replaceable Batteries
etc
(f) Video / Audio Heads from wear and tear in normal use
(g) Information stored on Hard Disk Drive, USB stick or SD card
(h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s)
5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover
(a) Internet and or DLNA connection / setup related problems
(b) Access fees and or charges incurred for internet connection
(c) The use of incompatible software or software not specifically stipulated in the product operations manual;
and
(d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or
any other device.
6. To claim warranty service, when required, you should:
Telephone Panasonic’s Customer Care Centre on 132600 or visit our website referred to below and use the Service Centre
Locator for the name/address of the nearest Authorised Service Centre.
Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of
purchase date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged
by you.
Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the
normal operating areas of the nearest Authorised Service Centres:
Plasma/LCD televisions / displays (screen size greater than 103 cm)
7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or
re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other
ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and
do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such installation,
de-installation, re-installation or transit.
Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however,
coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone
our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.
In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the
Australian Consumer Law. If there is a major failure with the product, you can reject the product and elect to have a refund or to have
the product replaced or if you wish you may elect to keep the goods and be compensated for the drop in value of the goods. You are
also entitled to have the product repaired or replaced if the product fails to be of acceptable quality and the failure does not amount to a
major failure.
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by
contacting the Panasonic Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair
or replace the product and will do so in a reasonable period of time from receiving notice from you.
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
If you require assistance regarding warranty conditions or any other enquiries, please visit the Panasonic Australia
If phoning in, please ensure you have your operating instructions available.
Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
PRO-031-F11 Issue: 4.0
01-01-2011
VQT4W95
Download from Www.Somanuals.com. All Manuals Search And Download.
47
(Inside of product)
p
VQT4W95
Panasonic Corporation
Web Site: http://panasonic.net
F0213ST0
C Panasonic Corporation 2013
Download from Www.Somanuals.com. All Manuals Search And Download.
|