Operating Instructions
5.8 GHz Digital Cordless Answering System
Model No.
KX-TG5451
5.8 GHz Digital Cordless Answering System
with Dual Handsets
Model No.
KX-TG5452
5.8 GHz Digital Cordless Answering System
with Three Handsets
Model shown is KX-TG5451.
Model No.
KX-TG5453
This unit is compatible with Caller ID. To use this feature, you must
subscribe to the appropriate service offered by your service provider.
Charge the battery for 6 hours before initial use.
Please read these Operating Instructions before using the unit and save
for future reference.
customers in the U.S.A. or Puerto Rico.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Programming via direct commands . . . 45
Direct commands chart . . . . . . . . . . 45
Technical information . . . . . . . . . . . . . . 70
Base unit . . . . . . . . . . . . . . . . . . . . . 70
Handset . . . . . . . . . . . . . . . . . . . . . . 70
Charger unit (KX-TG5452 and KX-
TG5453 only) . . . . . . . . . . . . . . . . . . 70
Warranty. . . . . . . . . . . . . . . . . . . . . . . . 71
Customer services . . . . . . . . . . . . . . . . 73
Answering System
Features
Answering system . . . . . . . . . . . . . . . . 47
Recording your greeting message . . . . 47
Erasing your greeting message . . . 48
Pre-recorded greeting message . . . 48
Turning the answering system on/off . . 48
Screening your calls . . . . . . . . . . . . 48
Listening to messages . . . . . . . . . . . . . 49
Listening to messages using the base
unit . . . . . . . . . . . . . . . . . . . . . . . . . 49
Listening to messages using the
Index
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . 74
handset . . . . . . . . . . . . . . . . . . . . . . 50
Memory capacity . . . . . . . . . . . . . . . . . 51
Remote operation. . . . . . . . . . . . . . . . . 52
Using the answering system
remotely . . . . . . . . . . . . . . . . . . . . . 52
Answering system settings. . . . . . . . . . 54
Remote code . . . . . . . . . . . . . . . . . 54
Ring count . . . . . . . . . . . . . . . . . . . . 54
Caller’s recording time . . . . . . . . . . . 55
Message alert . . . . . . . . . . . . . . . . . 55
Useful Information
Wall mounting. . . . . . . . . . . . . . . . . . . . 56
Base unit . . . . . . . . . . . . . . . . . . . . . 56
Charger unit (KX-TG5452 and KX-
TG5453 only) . . . . . . . . . . . . . . . . . . 58
Belt clip. . . . . . . . . . . . . . . . . . . . . . . . . 59
Headset (optional) . . . . . . . . . . . . . . . . 59
Error messages . . . . . . . . . . . . . . . . . . 60
Troubleshooting . . . . . . . . . . . . . . . . . . 61
General use . . . . . . . . . . . . . . . . . . 61
Programmable settings . . . . . . . . . . 61
Making/answering calls, Intercom . . 62
Phonebook . . . . . . . . . . . . . . . . . . . 62
Caller ID . . . . . . . . . . . . . . . . . . . . . 63
Answering system . . . . . . . . . . . . . . 64
Battery charge . . . . . . . . . . . . . . . . 65
Power failure . . . . . . . . . . . . . . . . . . 65
Important information about subscription
services . . . . . . . . . . . . . . . . . . . . . . . . 66
FCC and other information. . . . . . . . . . 67
openLCR service for the Caller IQ
feature . . . . . . . . . . . . . . . . . . . . . . . . . 69
For assistance, please call 1-800-211-PANA (7262).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing a Panasonic cordless telephone.
We recommend keeping a record of the following information for future reference.
Serial No.
Date of purchase
(found on the bottom of the unit)
Name and address of dealer
Attach your purchase receipt here.
Energy Star:
®
As an ENERGY STAR Participant, Panasonic has determined
that this product meets the ENERGY STAR guidelines for energy
efficiency. ENERGY STAR is a U.S. registered mark.
Trademarks:
openLCR, openLCR.com, and the openLCR logo are the trademarks of openLCR.com,
Inc.
Your phone
KX-TG5451
KX-TG5452
KX-TG5453
L References in these operating instructions to the charger and multiple handsets are for
KX-TG5452 and KX-TG5453 users only.
4
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Accessory information
Included accessories
To order replacement accessories, call 1-800-332-5368.
TTY users (hearing or speech impaired users) can call 1-866-605-1277.
Quantity
No. Accessory items
Order number
KX-TG5451 KX-TG5452 KX-TG5453
1
2
3
AC adaptor for base unit PQLV1Z
Telephone line cord PQJA10075Z
1
1
1
–
1
1
–
1
–
–
–
1
1
–
1
2
–
2
–
2
1
1
1
1
–
1
3
–
3
–
3
2
2
Wall mounting adaptor PQKL10068Z1
PQKL10068Z2
4
5
Battery
HHR-P104
Handset cover
PQYNTG5421SR
PQYNTG5432MR
PQKE10396Z1
PQKE10396Z2
PQLV30030ZM
KX-TCA1-G
6
7
Belt clip
Charger
AC adaptor
1
5
2
6
3
4
7
Additional/replacement accessories
Accessory items
Order number
Rechargeable nickel metal HHR-P104
hydride (Ni-MH) battery
Headset
KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA,
KX-TCA91, KX-TCA92, or KX-TCA98
Battery back-up power
supply
KX-TCA200
For assistance, please call 1-800-211-PANA (7262).
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Incorrect reassembly can cause
electric shock when the unit is
subsequently used.
Important safety
instructions
12. Unplug this unit from power outlets and
refer servicing to an authorized service
center when the following conditions
occur:
When using this unit, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, or
personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on this unit.
3. Unplug this unit from power outlets
before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for
cleaning.
4. Do not use this unit near water, for
example near a bathtub, wash bowl,
kitchen sink, etc.
A. When the power cord is damaged
or frayed.
B. If liquid has been spilled into the
unit.
C. If the unit has been exposed to rain
or water.
D. If the unit does not work normally
by following the operating
instructions. Adjust only controls
covered by the operating
instructions. Improper adjustment
may require extensive work by an
authorized service center.
5. Place the unit securely on a stable
surface. Serious damage and/or injury
may result if the unit falls.
E. If the unit has been dropped or
physically damaged.
6. Do not cover slots and openings on the
unit. They are provided for ventilation
and protection against overheating.
Never place the unit near radiators, or
in a place where proper ventilation is
not provided.
7. Use only the power source marked on
the unit. If you are not sure of the type
of power supplied to your home,
consult your dealer or local power
company.
F. If the unit exhibits a distinct change
in performance.
13. During thunderstorms, avoid using
telephones except cordless types.
There may be a remote risk of an
electric shock from lightning.
14. Do not use this unit to report a gas
leak, when in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
8. Do not place objects on the power
cord. Install the unit where no one can
step or trip on the cord.
9. Do not overload power outlets and
extension cords. This can result in the
risk of fire or electric shock.
10. Never push any objects through slots
in this unit. This may result in the risk of
fire or electric shock. Never spill any
liquid on the unit.
CAUTION:
Installation
L Never install telephone wiring during a
lightning storm.
L Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
L Never touch uninsulated telephone
wires or terminals unless the telephone
line has been disconnected at the
network interface.
11. To reduce the risk of electric shock, do
not disassemble this unit. Take the unit
to an authorized service center when
service is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.
L Use caution when installing or modifying
telephone lines.
6
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
L Do not touch the plug with wet hands.
the unit in health care facilities if any
regulations posted in the area instruct
you not to do so. Hospitals or health care
facilities may be using equipment that
could be sensitive to external RF (radio
frequency) energy.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the unit and is
easily accessible.
Battery
To reduce the risk of fire or injury to
persons, read and follow these
instructions.
L Use only the battery(ies) specified.
L Do not dispose of the battery(ies) in a
fire. They may explode. Check with local
waste management codes for special
disposal instructions.
L Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and
may cause burns or injury to the eyes or
skin. The electrolyte may be toxic if
swallowed.
L Exercise care when handling the
battery(ies). Do not allow conductive
materials such as rings, bracelets or
keys to touch the battery(ies), otherwise
a short circuit may cause the battery(ies)
and/or the conductive material to
overheat and cause burns.
L Charge the battery(ies) provided with or
identified for use with this product only in
accordance with the instructions and
limitations specified in this manual.
WARNING:
L To prevent the risk of fire or electrical
shock, do not expose this product to rain
or any type of moisture.
Medical
L Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The unit operates in
the frequency range of 5.76 GHz to 5.84
GHz, and the power output level can
range from 0.25 to 0.5 watts.) Do not use
For assistance, please call 1-800-211-PANA (7262).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
L The maximum calling distance may be
shortened when the unit is used in the
following places: Near obstacles such as
hills, tunnels, undergrounds, near metal
objects such as wire fences, etc.
For best performance
Base unit location/noise
The base unit and handset use radio
waves to communicate with each other.
For maximum distance and noise-free
operation, we recommend the following:
L Operating near 5.8 GHz electrical
appliances may cause interference.
Move away from the electrical
appliances.
L Placing the unit away from electrical
appliances such as a TV, personal
computer or another cordless phone.
Routine care
L Wipe the outer surface of the unit with a
soft cloth. Do not use benzine, thinner or
any abrasive powder.
L Placing the base unit in a HIGH and
CENTRAL location with no obstructions
such as walls.
L Raising the antennas vertically.
L If you use the handset near a microwave
oven which is being used, noise may be
heard. Move away from the microwave
oven and closer to the base unit.
L If you use the handset near another
cordless phone’s base unit, noise may
be heard. Move away from the other
cordless phone’s base unit and closer to
your base unit.
Environment
L Keep the unit away from electrical noise
generating devices, such as fluorescent
lamps and motors.
L The unit should be kept free from
excessive smoke, dust, high
temperature and vibration.
L The unit should not be exposed to direct
sunlight.
L Do not place heavy objects on top of the
unit.
L When you leave the unit unused for a
long period of time, unplug this unit from
power outlet.
L The unit should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms
where the temperature is less than 5 °C
(41 °F) or greater than 40 °C (104 °F).
Damp basements should also be
avoided.
8
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Connections
Base unit
Fasten the AC adaptor cord.
Raise the antennas.
Hook
To power outlet (120 V AC, 60 Hz)
AC adaptor
To single-line telephone jack (RJ11C)
Telephone line cord
Charger unit (KX-TG5452 and KX-TG5453 only)
To power outlet (120 V AC, 60 Hz)
AC adaptor
Note:
L Base unit: Use only the included Panasonic AC adaptor PQLV1.
L Charger unit: Use only the included Panasonic AC adaptor KX-TCA1.
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
L The unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using the Panasonic
KX-J66 T-adaptor. Emergency power can be supplied to the unit by connecting a
Panasonic battery back-up power supply noted on page 5.
For assistance, please call 1-800-211-PANA (7262).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
If you subscribe to an xDSL service
Battery installation
L Please attach a noise filter (contact your
xDSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 26) do not
function properly.
1 Insert the battery (1), and press it
down until it snaps into the
compartment (2).
2
1
To single-line telephone
jack (RJ11C)
2 Close the handset cover.
Telephone
Noise filter
line cord
(For xDSL users)
10
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Battery strength
You can confirm the battery strength on the
handset display.
Battery charge
Place the handset on the base unit or
charger for 6 hours before initial use.
Battery icon
5
Battery strength
Fully charged
Medium
L The unit will beep once, the CHARGE
indicator will light, and “Charging” will
be displayed.
6
7
Low
L “Charge completed” is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
When flashing: needs
to be recharged.
8
Discharged
Base unit
Recharging the battery
Recharge the battery when:
– “Recharge battery” is displayed or
OR
7 flashes on the handset display.
– the handset beeps intermittently while it
is in use.
Note:
L Recharge the handset battery for more
than 15 minutes, or the display will
continue showing the indication.
L If the battery has been discharged, the
handset will display “Charge for 6h”
and 8 when you place the handset
on the base unit or charger.
CHARGE indicator
Charger unit (KX-TG5452 and KX-
TG5453 only)
CHARGE
indicator
Note:
L To ensure the battery charges properly,
clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean more
often if the unit is subject to grease, dust,
or high humidity.
For assistance, please call 1-800-211-PANA (7262).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Battery performance
Battery replacement
After your Panasonic battery is fully
charged, you can expect the following
performance:
If battery performance diminishes, make
sure you have cleaned the charge
contacts and fully charged the battery. The
battery needs to be replaced if any of the
following are displayed after a few phone
calls even when you have fully charged the
battery.
Operation
Operating time
While in use
(talking)
Up to 5 hours
While not in use
Up to 11 days
Up to 3 hours
*1
(standby)
– “Recharge battery”
– 7 (flashing)
– “Charge for 6h”
– 8
While using the
Clarity Booster
feature (page 20)
*1 Handset is off the base unit or charger
but not in use.
L Use only the rechargeable Panasonic
battery noted on page 5.
Note:
1 Press the notch on the cover firmly and
slide it as indicated by the arrow.
L Battery power is consumed whenever
the handset is off the base unit or
charger, even when the handset is not in
use. The longer you leave the handset
off the base unit or charger, the shorter
you can actually talk on the handset.
Actual battery performance depends on
a combination of how often the handset
is in use and how often it is not in use.
L Once the battery is fully charged, you do
not have to charge it again until
“Recharge battery” is displayed or
7 flashes. This will maximize the
battery life.
2 Replace the old battery with a new one,
and close the cover (see page 10 for
battery installation).
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY for
information on how to recycle this battery.
12
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Controls and displays
Controls
Base unit
A
BC
D E F
G
H
I J K
L
M
G
KX-TG5453 KX-TG5452
KX-TG5451
N
O
P
Q R S T
A {SELECT}
B {CALL}
K {GREETING REC} (Recording)
L {GREETING CHECK}
M {ERASE}
N Charge contacts
O MIC (Microphone)
P VOL. (Volume) {<} {>}
Q {STOP}
C {LOCATOR/INTERCOM 1}
D {LOCATOR/INTERCOM 2}
E {LOCATOR/INTERCOM}
F CHARGE indicator
G Antenna
H Speaker
R {MESSAGE}
MESSAGE indicator
I Display
S {<} (Repeat)
J {ANSWER ON}
ANSWER ON indicator
T {>} (Skip)
For assistance, please call 1-800-211-PANA (7262).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Handset
Charger unit (KX-TG5452 and KX-
TG5453 only)
I
J
A
A
B
K
B
C
D
E
L
M
B
N
F
A Charge contacts
B CHARGE indicator
G
H
Using the navigator key
O
P
The handset navigator key can be used to
navigate through menus and to select
items shown on the display, by pressing
{^}, {V}, {<}, or {>}.
Q
A Speaker
B Soft key
C Headset jack
D {C} (TALK)
E Navigator key
F {s} (SP-PHONE)
G {*} (TONE)
H {PAUSE} {REDIAL}
I Ringer indicator
Message indicator
J Receiver
K Display
L {MENU}
M {OFF}
N {MUTE} {CLEAR}
O {HOLD} {INTERCOM}
P Microphone
Q Charge contacts
14
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Soft keys
Display
The handset features 2 soft keys. By
pressing a soft key, you can select the
function displayed directly above it.
Base unit display items
Displayed
Meaning
item
L The functions displayed will vary
depending on how you are using the
unit.
E
Flashes when message
L When a function does not appear above
a soft key, the soft key has no function.
memory is full.
E
Flashes when the date and
time need to be set.
5
C
Base unit is on an intercom
call, or handset is using the
answering system.
Rcvd
calls
Phone
book
K
L
When flashing: base unit is
paging or is being paged.
B
C
Line is in use.
When flashing: a call is on
hold or the answering
system is answering a call.
When flashing rapidly: a
call is being received.
Soft key examples:
Display
Action
function
Rcvd
calls
Enters caller list
Base unit ringer is off.
O
E
Greeting message
recording error
Conf
Establishes a conference
*1
call
9@
Answering system is in
greeting only mode (caller
messages will not be
recorded).
*1 KX-TG5452 and KX-TG5453 only
Backlit display and handset keypad
The handset display and dialing buttons
will light for a few seconds after pressing
any of the handset’s controls or lifting the
handset off the base unit or charger. They
will also light when a call is being received.
H1
Handsetnumber;displayed
when paging or being
paged. (example shown
*1
here: handset 1)
*1 KX-TG5452 and KX-TG5453 only
Handset display items
Displayed
Meaning
item
J
5
Voice enhancer is on.
Battery strength
For assistance, please call 1-800-211-PANA (7262).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
7 Press {OFF}.
Setting the date and time
Note:
L If you make a mistake when entering the
date and time, press {<}, {>}, {V}, or
{^} to move the cursor, then make the
correction.
Set the date and time so that the unit will
announce the day and time each message
was recorded by the answering system
(page 47) when you play back messages.
L If a power failure occurs, E will flash to
indicate the date and time must be set
again.
1 Press {MENU}.
2 Scroll to “Date and time” by pressing
{V} or {^}, then press {>} or {Select}.
To confirm the date and time
Repeat steps 1 and 2. Press {OFF} when
finished.
Date and time
KBack dB SelectL
Time adjustment (Caller ID subscribers
only)
When calls are received, Caller ID will
automatically adjust the date and time
(including daylight saving time).
3 Enter the current month, day, and year
by selecting 2 digits for each.
Example: June 15, 2005
Press {0}{6} {1}{5} {0}{5}.
Date:12.31.2005
Time:12:00 AM
L If you have not set the date and time
manually, Caller ID will not adjust the
date and time.
KAM/PM
SaveL
L You can turn this feature off (page 44).
4 Enter the current hour and minute (12-
hour clock format) by selecting 2 digits
for each.
Example: 9:30 PM
Press {0}{9} {3}{0}.
Date:06.15.2005
Time:12:00 AM
K
AM/PM
Save
L
L
5 Select “AM” or “PM” by pressing {AM/
PM}.
Date:06.15.2005
Time:09:30 AM
KAM/PM
Save
6 Press {Save}.
L When the date and time are set, E
disappears from the base unit
display.
L If the handset beeps 3 times, the date
and time were not set correctly. Enter
the correct digits.
16
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
4 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
Making calls
Note:
L Talk alternately with the caller in a quiet
room.
L If the other party has difficulty hearing
you, press {V} to decrease the speaker
volume.
Soft keys
{OFF}
L While on a call, you can switch from the
receiver to the speakerphone by
pressing {s}. To switch back to the
receiver, press {C}.
{C}
{s}
Navigator key
{MUTE}
{CLEAR}
{*}
{HOLD}
To adjust the speaker volume
6 levels (high to low) are available.
While using the speaker, press {V} or {^}
repeatedly.
{PAUSE}
{REDIAL}
Microphone
1 Lift the handset and press {C}.
L “Talk” will be displayed.
To dial after confirming the entered
number
2 Dial the phone number.
1 Enter the phone number.
3 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
Example:
3334444
KFlash
CallL
Note:
L To correct a digit, press {<} or {>} to
move the cursor, then press
{CLEAR}. Enter the correct number.
L If a pause is required when dialing,
press {PAUSE} where needed (page
20).
L “Line in use” is displayed when
someone is talking on another handset
(KX-TG5452 and KX-TG5453 only) or
another phone.
To adjust the receiver volume
3 levels (high/medium/low) are available.
While using the receiver, press {V} or {^}
repeatedly.
L To cancel, press {OFF}.
2 Press {C}, {s}, or {Call}.
3 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
To use the speakerphone
1 Lift the handset and press {s}.
L “SP-phone” will be displayed.
To redial the last number dialed
1 Press {C} or {s}.
2 Dial the phone number.
3 When the other party answers, speak
2 Press {REDIAL}.
into the microphone.
For assistance, please call 1-800-211-PANA (7262).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
To make a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
1 Press {REDIAL}.
L The last number dialed will be
1 Lift the handset and press {C} or {s}.
displayed.
L You can also answer a call by
pressing any button except {V}, {^},
{<}, {>}, or {OFF}. (Any key talk
feature)
2 Press {V} or {^} repeatedly to display
the desired number.
L To delete the displayed number,
press {CLEAR}.
L To exit the list, press {OFF}.
2 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
3 Press {C}, {s}, or {Call}.
Auto talk
This feature allows you to answer a call by
simply lifting the handset off the base unit
or charger. You do not need to press {C}.
To activate this feature, see page 39.
Temporary ringer off
While the handset is ringing for an outside
call, you can turn the ringer off temporarily
by pressing {OFF}. The handset will ring
the next time a call is received.
18
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
MUTE button
Useful features during a
call
You can mute your voice during a
conversation. While mute is turned on you
will be able to hear the other party, but the
other party will not be able to hear you.
To mute your voice, press {MUTE}.
HOLD button
This feature allows you to put an outside
call on hold.
Example:
Talk
00-00-30 <Mute>
KX-TG5451:
Press {HOLD} during an outside call.
L “Hold” will be displayed.
L To return to the call, press {C} or {s}.
L “<Mute>” will flash on the display.
L To return to the conversation, press
{MUTE}, {C}, or {s}.
Voice enhancer
KX-TG5452 and KX-TG5453:
This feature clarifies the voice of the
person you are talking to, reproducing a
more natural-sounding voice that is easier
to hear and understand.
1 Press {HOLD} during an outside call.
L To transfer the call to another
handset, see page 34, step 2.
2 Press {HOLD} again.
1 Press {MENU} during an outside call.
L “Hold” will be displayed.
2 To turn this feature on or off, press {3}.
L To return to the call, press {C} or
{s}.
L Another handset user can take the
call by pressing {C} or {s}.
L You can also select “V.E. on” or
“V.E. off” by pressing {V} or {^}
then pressing {>}.
g
3=V.E. on
4=Caller IQ
Note:
L “Line on hold” will be displayed on
the other handsets (KX-TG5452 and
KX-TG5453 only).
L When turned on, “J” will be
displayed.
L If another phone is connected on the
same line (page 9), you can also take
the call by lifting its handset.
Note:
L Once you turn voice enhancer on, it will
be activated for all outside calls until
turned off.
L If a call is kept on hold for more than 6
minutes, an alarm tone will start to
sound and the ringer indicator will flash
rapidly. After 4 additional minutes on
hold, the call will be disconnected.
L You can also turn this feature on or off by
programming (page 39).
L Depending on the condition and quality
of your telephone line, this feature may
emphasize existing line noise. If it
becomes difficult to hear, turn this
feature off.
For assistance, please call 1-800-211-PANA (7262).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
Clarity booster
PAUSE button (for PBX/long
distance service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
This feature can improve sound clarity
when the handset is used in an area where
there may be interference. During an
outside call, this feature will be turned on
automatically when necessary. This
feature will turn off when you hang up or
put a call on hold. It will not turn off
automatically during a call. You can also
turn this feature on or off manually.
1 Press {9}.
1 Press {MENU} during an outside call.
2 Press {PAUSE}, then dial the phone
number.
2 Press {2} to select “Booster on” or
Example:
“Booster off”.
9P15556667777
L You can also select “Booster on” or
“Booster off” by pressing {V} or
{^} then pressing {>}.
K
Flash
CallL
3 Press {C}, {s}, or {Call}.
1=Phonebook
2=Booster on
g
Note:
L A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
L While this feature is turned on,
“BOOST” will flash on the display.
Note:
Flash button
L If this feature is turned off manually
during a call, it will not be turned on
automatically during the same call.
Pressing {Flash} allows you to use special
features of your host PBX such as
transferring an extension call, or accessing
optional telephone services such as Call
Waiting.
L While this feature is turned on, battery
operating time will be shortened (page
12).
Example:
Talk
00-00-20
Flash
L KX-TG5453 only:
The maximum number of extensions
which can be used at a time may
decrease when using this feature.
K
Note:
L To change the flash time, see page 41.
Call share (KX-TG5452 and KX-
TG5453 only)
When another handset is on an outside
call, this feature allows you to join that call.
To join a conversation, press {C} or {s}
when the other handset is on an outside
call.
L “Conference” will be displayed.
20
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Making/Answering Calls
For Call Waiting service users
To use Call Waiting, you must subscribe to
your telephone company’s Call Waiting
service.
This feature allows you to receive calls
while you are already talking on the phone.
If you receive a call while on the phone,
you will hear a Call Waiting tone.
Press {Flash} to answer the 2nd call.
L The 1st call is put on hold while you
answer the 2nd call.
L To switch between calls, press {Flash}.
Note:
L Please contact your telephone company
for details and availability of this service
in your area.
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
Press {*} (TONE) before entering access
numbers which require tone dialing.
Note:
L The dialing mode will return to pulse
when you hang up.
For assistance, please call 1-800-211-PANA (7262).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
7 Press {Save}.
L To add other items, repeat from step
2.
Using the phonebook
The handset phonebook allows you to
make calls without having to dial manually.
You can add 50 names and phone
numbers to the handset phonebook and
search for phonebook entries by name.
8 Press {OFF}.
Note:
L Caller ID subscribers can use ringer ID
and light-up ID features (page 27).
Adding items to the phonebook
Character table
The dial keys can be used to enter
characters. To enter a character, press the
appropriate dial key, repeatedly if
necessary. To enter another character that
is located on the same dial key, first press
{>} to move the cursor to the next space.
1 Press {Phonebook}.
Rcvd
calls
Phone
book
K
L
2 Press {Add}.
L The display shows the number of
Key
{1}
{2}
{3}
{4}
{5}
{6}
{7}
{8}
{9}
{0}
{*}
{#}
Characters
items in the phonebook.
& ’
(
)
,
–
.
/
1
Example:
Phonebook
7 items
SearchL
a
d
g
j
b
c
f
A B C 2
D E F 3
KAdd
e
h
k
i
G H I
K L
4
5
3 Enter the name (max. 16 characters).
l
J
See the character table for entry.
m n
o
r
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
Enter name
|
p
t
q
u
s
KBack
NextL
v
y
w x
z
4 Press {Next}.
0
Space
5 Enter the phone number (max. 32
;
#
digits).
L If a pause is required when dialing,
press {PAUSE} where needed (page
20).
{CLEAR} To delete a character or
number
Enter phone no.
To edit/correct a mistake
Press {<} or {>} to move the cursor to the
character or number you wish to erase,
then press {CLEAR}. Enter the
appropriate character or number.
6 Press {Next}.
L If you want to change the name and
number, press {Edit}, then repeat
from step 3.
Note:
Example:
Tom
555-765-4321
Edit Save
L Press and hold {CLEAR} to erase all
characters or numbers.
K
L
22
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Calling someone in the
phonebook
Phonebook items can be searched for
alphabetically by scrolling through the
phonebook items.
Editing items in the phonebook
1 Press {Phonebook}, then press
{Search}.
2 Press {V} or {^} repeatedly to display
the desired item.
1 Press {Phonebook}.
L For quick search, you can skip to step
3 Press {Edit}.
3.
4 Edit the name if necessary. See the
character table on page 22 for
character entry.
2 Press {Search}.
0-9=Name search
dB=Scroll list
5 Press {Next}.
6 Edit the phone number if necessary.
3 Press {V} or {^} repeatedly to display
the desired item.
7 Press {Next}, then press {Save}.
L To exit the phonebook, press {OFF}.
4 Press {C} or {s}.
Note:
L To edit other items, repeat from step
2.
8 Press {OFF}.
L To view a phone number over 16 digits
long, follow steps 1 to 3, then press
{Edit} and {Next}. Press {OFF} when
finished.
Erasing items in the phonebook
1 Press {Phonebook}, then press
{Search}.
To search for a name by initial
2 Press {V} or {^} repeatedly to display
the desired item.
1 Press {Phonebook}, then press
{Search}.
3 Press {CLEAR}.
2 Press the dialing button ({0} to {9},
{#}, or {*}) which corresponds to the
first letter you are searching for (see the
character table, page 22).
4 Press {Yes}.
L To cancel erasing, press {No}.
L To erase other items, repeat from
step 2.
Example: “LISA”
Press {5} repeatedly to display any
name with the initial “L”.
5 Press {OFF}.
L If there is no item corresponding to
the letter you selected, the next item
will be displayed.
3 Press {V} repeatedly to display the
desired item.
L To exit the phonebook, press {OFF}.
L To dial the displayed number, press
{C} or {s}.
For assistance, please call 1-800-211-PANA (7262).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
Chain dial feature
Copying phonebook
items (KX-TG5452 and
KX-TG5453 only)
This feature allows you to dial phone
numbers from the phonebook while you
are on a call.
Example: Using a long distance calling
card
You can copy one or all of the phonebook
items from one handset to another.
1 Dial from the phonebook:
1-800-012-3456 (Calling card access
number).
Important:
L Make sure the destination handset is not
in use.
2 When prompted, dial from the
phonebook:
1234 (Calling card PIN).
L Do not place your handset on the base
unit or charger until copying has
finished, otherwise copying will stop.
3 When prompted, dial from the
phonebook:
1-555-012-3456 (the person you want
to call).
L If an outside call is received during the
phonebook copy, copying will stop. You
will need to copy the item(s) later.
1 During an outside call, press
L Ringer ID and light-up ID settings for
phonebook items are not copied (page
27).
{MENU}.
2 Press {1} to select “Phonebook”.
3 Press {V} or {^} repeatedly to display
For KX-TG5452 users
the desired item.
Copying an item
4 Press {Call}.
L Repeat from step 1 to dial other
1 Press {MENU}.
numbers.
2 Scroll to “Copy phonebook” by
Note:
pressing {V} or {^}, then press {>}.
L When storing a calling card access
number and your PIN in the phonebook
as one phonebook item, press {PAUSE}
to add pauses after the number and PIN
as necessary (page 20).
3 Scroll to “Copy 1 item” by pressing
{V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to display
the desired item.
L If you have rotary or pulse service, you
need to press {*} before pressing
{MENU} in step 1 to change the dialing
mode temporarily to tone.
L To search for the item by initial, see
page 23.
5 Press {Send}.
L When the item has been copied,
“Complete” will be displayed.
L The destination handset display will
show “Phonebook Receiving”,
then “Phonebook Received”.
L To copy another item, repeat from
step 4.
6 Press {OFF}.
24
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Phonebook
L To copy another item, repeat from
step 5.
Copying all items
1 Press {MENU}.
7 Press {OFF}.
2 Scroll to “Copy phonebook” by
Copying all items
pressing {V} or {^}, then press {>}.
1 Press {MENU}.
3 Scroll to “Copy all items” by
pressing {V} or {^}, then press {>}.
2 Scroll to “Copy phonebook” by
L When all items have been copied,
“Complete” will be displayed.
pressing {V} or {^}, then press {>}.
3 Scroll to “Copy all items” by
L The destination handset display will
show “Phonebook Receiving”,
then “Phonebook Received”.
pressing {V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
the destination extension number.
4 Press {OFF}.
L You can also select the extension
number by pressing {1} to {3}.
For KX-TG5453 users
L To confirm the destination handset
number ([1], [2], or [3]), place that
handset on the base unit or charger.
5 Press {Send}.
L When all items have been copied,
“Complete” will be displayed.
L The destination handset display will
show “Phonebook Receiving”,
then “Phonebook Received”.
Copying an item
1 Press {MENU}.
L To copy items to another extension,
repeat from step 3.
2 Scroll to “Copy phonebook” by
pressing {V} or {^}, then press {>}.
6 Press {OFF}.
3 Scroll to “Copy 1 item” by pressing
{V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
the destination extension number, then
press {Next}.
L You can also select the extension
number by pressing {1} to {3}.
5 Press {V} or {^} repeatedly to display
the desired item.
L To search for the item by initial, see
page 23.
6 Press {Send}.
L When the item has been copied,
“Complete” will be displayed.
L The destination handset display will
show “Phonebook Receiving”,
then “Phonebook Received”.
For assistance, please call 1-800-211-PANA (7262).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Service
Call Waiting Caller ID display
Using Caller ID service
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information will be displayed after
you hear a Call Waiting tone (page 21).
This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to
your telephone company’s Caller ID
service.
Example:
BROWN,NANCY
1-555-666-7777
Flash -Waiting-
K
Caller ID features
When an outside call is being received, the
calling party’s name or telephone number
will be displayed.
Caller information for the last 50 different
callers will be logged in the caller list,
allowing you to return missed calls. Caller
information is stored by the most recent
call to the oldest.
Note:
L Please contact your telephone company
for details and availability of this service
in your area.
Talking Caller ID
This feature allows you to know who is
calling without looking at the display. When
a call comes in, the handset and base unit
will announce the caller’s name displayed
on the handset following every ring.
To use this feature, you must subscribe to
your telephone company’s Caller ID
service.
L When Caller ID information is received
and it matches a phone number stored
in the phonebook, the handset will use
the ringer tone and the ringer indicator
color you assigned to the caller. (Ringer
ID and light-up ID)
L While listening to a message recorded
by the answering system, using the
handset, you can call back the caller
without having to dial the phone number
(page 51).
L If the unit does not receive Caller ID
information, the unit will announce “Call
from out of area”, “Call from private
caller”, or “Call from long distance”.
L If the unit cannot receive caller
information, the following will be
displayed:
“Out of area”: The caller dialed from
an area which does not provide Caller ID
service.
“Private caller”: The caller
requested not to send caller information.
“Long distance”: The caller called
you long distance.
L If a call is received from an area where
name display service is not available,
“Number available” will be announced.
L Name pronunciation may vary. This
feature may not pronounce all names
correctly.
L The unit will announce each letter of
abbreviations, such as “Co.” and “Inc.”.
L Caller ID supports names of up to 15
letters. If the caller’s name has more
than 15 letters, the name will not be
displayed or announced correctly.
L If the unit is connected to a PBX system,
caller information may not be received
properly. Consult your PBX supplier.
L If you subscribe to a distinctive ring
service (such as IDENTA-RING), your
unit may mute one or more of the rings in
order to announce the name of the
caller.
L If the ringer volume of the handset and
base unit is turned off, caller names will
26
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Service
not be announced. The announcement
is heard at the ringer volume (page 38,
42).
Ringer ID
You can assign a different ringer tone to
each caller in the phonebook. If you select
“No Ringer ID”, the unit will use the
ringer tone you set on page 38 when a call
is received from that caller. The default
setting is “No Ringer ID”.
L When you receive a call while on the
phone, the 2nd caller’s name will not be
announced even if you subscribe to both
Caller ID and Call Waiting with Caller ID
services.
1 Press {Phonebook}, then press
L If this feature is turned off, caller names
will not be announced (page 39, 43).
{Search}.
L Usually the unit will announce the
caller’s name after the 2nd ring. If you
turn on the answering system, and set
the ring count to “2” (page 54), the unit
will not announce the caller’s name. If
“Toll saver” is selected, and there is
a new message, the unit will not
2 Press {V} or {^} repeatedly to display
the desired item.
3 Press {Option}.
4 Press {1} to select “Ringer ID”.
5 Press {V} or {^} repeatedly to select
announce the caller’s name.
the desired ringer tone.
L KX-TG5452 and KX-TG5453 only:
If an outside call is received while on an
intercom call between the handset and
base unit, the other handsets will ring,
but the caller’s name will not be
announced.
L You can also select the ringer tone by
pressing {1} to {7}, or {0} (“No
Ringer ID”).
6 Press {Save}, then press {OFF}.
Light-up ID
Ringer ID and light-up ID
You can assign a different ringer indicator
color to each caller in the phonebook.
Select “Color1-Default” (Amber),
“Color2” (Green), “Color3” (Red), or
“Multicolor”.
This feature can help you identify who is
calling by using different ringers and ringer
indicator colors for different callers stored
in the phonebook. You can assign a
different ringer and indicator color to each
phonebook item. When a call is received
from a caller stored in the phonebook, the
ringer and indicator color are used after
Caller ID information is displayed.
1 Press {Phonebook}, then press
{Search}.
2 Press {V} or {^} repeatedly to display
the desired item.
L Usually the ringer and indicator color will
be changed from the 2nd ring.
3 Press {Option}.
4 Press {2} to select “Light-up ID”.
5 Press {V} or {^} repeatedly to select
the desired ringer indicator color.
L You can also select the color by
pressing {1} to {4}.
6 Press {Save}, then press {OFF}.
For assistance, please call 1-800-211-PANA (7262).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Service
Note:
L You can also press {Rcvd calls} to
enter the caller list.
Caller list
Caller information for the last 50 different
callers will be logged in the caller list. You
can use this list to return missed calls.
L Calling back will not be possible if the
caller information does not include a
phone number.
L Caller information includes caller names
and phone numbers, the date and time
of calls, and the number of times the
caller called.
L In some cases, you may have to edit the
number before dialing. (For example,
you may have to delete “1” and the area
code.)
L KX-TG5452 and KX-TG5453 only:
Each handset has its own caller list. If
you viewed the caller list or answered a
call on one handset, the same
information in the other handsets will be
displayed as “missed calls”.
Missed calls
If a call is not answered, the unit treats the
call as a missed call. The number of
missed calls is shown on the handset
display. This lets you know if you should
view the caller list to see who called while
you were out.
Displayed symbols
Example: Handset off the base unit or
charger
L If the same caller calls more than once, it
will be displayed with the number (“×2”
to “×9”). Only the date and time of the
most recent call will be stored.
10 missed calls
Phone
book
Rcvd
calls
K
L
L A Q is displayed next to items which
have already been viewed or answered
on this handset.
Note:
L When the unit has new messages, “New
message” will be displayed in place of
“missed calls”.
Viewing the caller list and
calling back
1 Press {V} or {^} to enter the caller list.
2 Press {V} to search from the most
recent call, or press {^} to search from
the oldest call.
L The caller’s name and phone number
are displayed alternately.
Example:
SMITH,JACK
3:10P JUN.29
1-555-333-4444
3:10P JUN.29
L To exit the caller list, press {OFF}.
3 Press {C} or {s}.
28
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Service
Note:
Editing a caller’s phone number
before calling back
You can edit a phone number in the caller
list by removing its area code and/or the
long distance code “1”.
L The handset can remember up to 4 area
codes to be edited. Phone numbers from
the 4 most recently edited area codes
will be automatically edited.
L This feature will not be activated until
edited numbers are called back.
1 Press {V} or {^} to enter the caller list.
L If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the area
codes you want to edit once again.
2 Press {V} or {^} repeatedly to display
the desired item.
3 Press {Edit} repeatedly until the phone
number is shown in the desired format.
Each time you press {Edit}, the phone
number will be rearranged into one of 3
patterns.
Storing caller information into
the phonebook
Items in the caller list can be stored into
1 Local phone number
each handset’s phonebook.
Example:
321-5555
2 Area code – Local phone number
Example:
1 Press {V} or {^} to enter the caller list.
555-321-5555
2 Press {V} or {^} repeatedly to display
the desired item.
3 1 – Area code – Local phone
L To edit the number, press {Edit}
repeatedly until the number is shown
in the desired format (page 29,
step 3).
number
Example:
1-555-321-5555
4 To return a call, press {C} or {s}.
3 Press {Save}.
L If there is no name information for the
caller, “Enter name” will be
displayed.
1 Enter the name if necessary (see
page 22, step 3).
Caller ID number auto edit feature
Once you call back an edited number (see
“Editing a caller’s phone number before
calling back”), the unit can automatically
edit other incoming phone numbers each
time you receive a call.
2 Press {Next}, then press {Save}.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area code, so that you can
call these local numbers using caller
information without dialing the area code.
To activate this feature, you must edit an
item in the caller list (see “Editing a caller’s
phone number before calling back”), then
call that number. After that, calls from that
caller’s area code will be edited
L To continue storing other items,
repeat from step 2.
4 Press {OFF} to exit.
Note:
L If the caller information does not include
a phone number, you cannot store it in
the phonebook.
automatically.
This feature can be turned on or off (page
40). The default setting is ON.
For assistance, please call 1-800-211-PANA (7262).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Service
Erasing caller information
Erasing a selected item
1 Press {V} or {^} to enter the caller list.
2 Press {V} or {^} repeatedly to display
the desired item.
3 Press {CLEAR}.
L To erase other items, repeat from
step 2.
L To exit the caller list, press {OFF}.
Erasing all items
Make sure that you have no missed calls.
1 Press {V} or {^} to enter the caller list.
2 Press {All erase}.
L To cancel erasing, press {No}.
3 Press {Yes}.
30
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom Features
From the base unit to the handset
Intercom
1 Base unit:
Intercom calls can be made between a
handset and the base unit (and between 2
handsets, KX-TG5452 and KX-TG5453
only).
Press {LOCATOR/INTERCOM}.
L The handset will beep for 1 minute.
L To stop paging, press {LOCATOR/
INTERCOM}.
Note:
2 Handset:
L If you have difficulty hearing the other
party while using the speaker, decrease
the speaker volume.
Press {C}, {s}, or {INTERCOM} to
answer the page.
3 Base unit:
L If you receive a phone call while talking
on the intercom, you will hear 2 tones
(page 39, 42). To answer the call, press
{OFF}, then press {C} or {s}.
L You cannot change the ringer tone for
intercom calls.
When the paged party answers, speak
into the MIC.
4 Base unit:
When finished talking, press
{LOCATOR/INTERCOM}.
Note:
For KX-TG5451 users
L You can locate a misplaced handset by
paging it. (Handset locator)
From the handset to the base unit
1 Handset:
Press {INTERCOM}.
L The base unit will beep for 1 minute.
L To stop paging, press {OFF}.
2 Base unit:
Press {LOCATOR/INTERCOM} to
answer the page.
3 Handset:
When finished talking, press {OFF}.
Note:
L During an intercom call, the handset
user can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
L To adjust the base unit’s speaker
volume, press {>} or {<} repeatedly. 8
levels (high to low) are available.
For assistance, please call 1-800-211-PANA (7262).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom Features
From the base unit to a handset
For KX-TG5452 users
Call the desired unit by selecting the
extension number, shown in the upper
right of each handset’s display. The base
unit’s extension number is 0.
1 Base unit:
Press {LOCATOR/INTERCOM 1} or
{LOCATOR/INTERCOM 2}.
L The handset will beep for 1 minute.
L To confirm the handset’s extension
number ([1]or [2]), place the handset
on the base unit or charger.
L To stop paging, press either
{LOCATOR/INTERCOM 1} or
{LOCATOR/INTERCOM 2}.
L The base unit will display the paging or
paged handset number (H1 or H2).
2 Handset:
Press {C}, {s}, or {INTERCOM} to
answer the page.
From the handset to the base unit
1 Handset:
3 Base unit:
Press {INTERCOM}, then press {0}.
When the paged party answers, speak
into the MIC.
L You can also select the base unit by
pressing {V} or {^} then pressing
{>}.
L The base unit will ring for 1 minute.
L To stop paging, press {OFF}.
4 Base unit:
When finished talking, press either
{LOCATOR/INTERCOM 1} or
{LOCATOR/INTERCOM 2}.
2 Base unit:
Note:
Press either {LOCATOR/INTERCOM
1} or {LOCATOR/INTERCOM 2} to
answer the page.
L You can locate a misplaced handset by
paging it. (Handset locator)
From one handset to the other handset
Example: When handset 1 calls handset 2.
3 Handset:
When finished talking, press {OFF} or
place the handset on the charger.
1 Handset 1:
Press {INTERCOM}, then press the
other handset number {2}.
Note:
L During an intercom call, the handset
user can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
L You can also select the handset by
pressing {V} or {^} then pressing
{>}.
L The paged handset will beep for 1
minute.
L To adjust the base unit’s speaker
volume, press {>} or {<} repeatedly. 8
levels (high to low) are available.
L To stop paging, press {OFF}.
2 Handset 2:
Press {C}, {s}, or {INTERCOM} to
answer.
3 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
32
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom Features
From the base unit to a handset
For KX-TG5453 users
Call the desired unit by selecting the
extension number, shown in the upper
right of each handset’s display. The base
unit’s extension number is 0.
1 Base unit:
Press {SELECT} repeatedly until the
desired handset’s extension number is
displayed on the base unit, then press
{CALL}.
L To confirm the handset’s extension
number ([1], [2], or [3]), place the
handset on the base unit or charger.
L The handset will beep for 1 minute.
L To stop paging, press {CALL}.
L The base unit will display the paging or
paged handset number (H1, H2, or
H3).
2 Handset:
Press {C}, {s}, or {INTERCOM} to
answer the page.
From the handset to the base unit
3 Base unit:
1 Handset:
When the paged party answers, speak
into the MIC.
Press {INTERCOM}, then press {0}.
L You can also select the base unit by
pressing {V} or {^} then pressing
{>}.
4 Base unit:
When finished talking, press {CALL}.
L The base unit will ring for 1 minute.
Note:
L To stop paging, press {OFF}.
L You can locate a misplaced handset by
paging it. (Handset locator)
2 Base unit:
Press {CALL} to answer the page.
From one handset to another handset
Example: When handset 1 calls handset 3.
3 Handset:
When finished talking, press {OFF} or
place the handset on the charger.
1 Handset 1:
Press {INTERCOM}, then press the
other handset number {3}.
Note:
L You can also select the handset by
pressing {V} or {^} then pressing
{>}.
L During an intercom call, the handset
user can switch to the speaker by
pressing {s}. To switch back to the
receiver, press {C}.
L The paged handset will beep for 1
minute.
L To adjust the base unit’s speaker
volume, press {>} or {<} repeatedly. 8
levels (high to low) are available.
L To stop paging, press {OFF}.
2 Handset 3:
Press {C}, {s}, or {INTERCOM} to
answer.
3 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
For assistance, please call 1-800-211-PANA (7262).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom Features
call will ring at your handset again. If you
still do not answer the call within 4
minutes, the call will be disconnected.
Transferring a call (KX-
TG5452 and KX-TG5453
only)
Outside calls can be transferred between 2
handsets.
1 During an outside call, press
{INTERCOM}.
L The call will be put on hold.
2 KX-TG5452 users:
To page the other handset, press
{handset[1]} or {handset[2]}.
KX-TG5453 users:
To page another handset, press
{HS[1]}, {HS[2]}, or {HS[3]}.
3 Wait for the paged party to answer.
L The paged handset user can answer
by pressing {C}, {s}, or
{INTERCOM}.
L If there is no answer, press {C} or
{s} to return to the outside call.
4 To complete the transfer, press {OFF}.
Transferring a call without speaking to
the paged party
1 KX-TG5452 users:
During an outside call, press
{INTERCOM}, then press
{handset[1]} or {handset[2]}.
KX-TG5453 users:
During an outside call, press
{INTERCOM}, then press {HS[1]},
{HS[2]}, or {HS[3]}.
2 Press {OFF}.
L The outside call rings at the paged
handset.
Note:
L If the paged party does not answer the
call, press {C} or {s} to return to the
call. If not answered within 1 minute, the
34
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom Features
Conference calls (KX-
TG5452 and KX-TG5453
only)
A conference call allows 2 handsets to
speak together with an outside party.
1 During an outside call, press
{INTERCOM}.
L The call will be put on hold.
2 KX-TG5452 users:
To page the other handset, press
{handset[1]} or {handset[2]}.
KX-TG5453 users:
To page another handset, press
{HS[1]}, {HS[2]}, or {HS[3]}.
3 When the paged party answers, press
{Conf} on your handset to establish a
conference call.
L “Conference” will be displayed.
L To leave the conference, press
{OFF}. The other parties can
continue the conversation.
Note:
L The outside call can be put on hold by
pressing {HOLD} during a conference
call. Communications between
extensions are not suspended. Only the
person who placed the call on hold can
resume the conference by pressing
{Conf}.
L KX-TG5453 only:
One more extension can join the
conference call. To join the conference
call, press {C} or {s}.
For assistance, please call 1-800-211-PANA (7262).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages. To program, press {MENU}, press {V} or
{^} to scroll through the menu, and press {>} or {Select} when the desired menu item or
setting is displayed.
Important:
L Before programming, make sure the handset and base unit are not being used. The
handset must be operated near the base unit and while off the base unit or charger.
Main menu
Sub-menu 1
Sub-menu 2
Page
page 50
page 38
page 38
page 39
page 16
page 39
–
Message play
Ringer setting
–
–
–
–
–
–
–
–
–
–
–
Ringer volume
Ringer tone
Interrupt tone
*3
Date and time
–
–
Voice enhancer
*1
*2
Caller IQ
View Info.?
Get new Info.?
Turn CIQ off?
Copy 1 item
–
–
*4
Copy phonebook
page 24,
25
Copy all items
–
page 25
page 39
page 44
page 54
page 55
page 54
page 55
page 40
page 43
page 39
page 40
page 44
page 41
page 41
page 41
Talking CallerID
Customer support
Initial setting
–
–
–
–
*3
Set answering
Ring count
*3
Recording time
*3
Remote code
Message alert
LCD contrast
Key tone
–
–
–
–
–
–
Auto talk
Caller ID edit
Time adjustment
Set tel line
*3
*3
Set dial mode
*3
Set flash time
*3
Set line mode
36
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
Main menu
Sub-menu 1
Sub-menu 2
Page
*3
Initial setting
Set base unit
Ringer tone
Interrupt tone
page 42
page 42
page 43
page 43
page 40
*3
*3
Talking CallerID
Registration
–
–
Change language
*1 Can be used to activate Caller IQ. See the leaflet included with this unit for more
information.
*2 “Activate CIQ?” is displayed if you have not subscribed to openLCR service. “Turn
CIQ on?” is displayed when Caller IQ is turned off. See the leaflet included with this
unit for more information.
*3 If you program these settings using one of the handsets, you will not need to program
the same item using another handset (KX-TG5452 and KX-TG5453 only).
*4 KX-TG5452 and KX-TG5453 only
Note:
L To exit programming, press {OFF} at any time.
L To go back to the previous menu, press {<} or {Back}, or press {>} or {Select} while
“(Go back)” is displayed.
For assistance, please call 1-800-211-PANA (7262).
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
Handset ringer tone
Ringer settings
You can change the ringer tone heard
when an outside call is received. There are
3 tones and 4 melodies. The default
setting is “Tone 1”.
Handset ringer volume
4 levels (high/medium/low/off) are
available. The default setting is HIGH.
1 Press {MENU}.
1 Press {MENU}.
2 Scroll to “Ringer setting” by
pressing {V} or {^}, then press {>}.
2 Scroll to “Ringer setting” by
pressing {V} or {^}, then press {>}.
Ringer setting
Ringer setting
3 Scroll to “Ringer tone” by pressing
{V} or {^}, then press {>}.
3 Scroll to “Ringer volume” by pressing
{V} or {^}, then press {>}.
Ringer tone
Ringer volume
4 Press {V} or {^} repeatedly to select
the desired setting.
4 Press {V} or {^} repeatedly to select
the desired volume.
Ringer tone
1=Tone 1
KBack dB SaveL
Ringer volume
Low |||||| High
KBack dB SaveL
L You can also select the ringer tone by
pressing {1} to {7}.
L To turn the ringer off, press {V}
repeatedly until “Off ?” is displayed.
L If the ringer volume has been turned
off, the handset will not ring.
5 Press {Save}.
5 Press {Save}, then press {OFF}.
Note:
Note:
L When the ringer volume is set to off, the
handset will display “Ringer off”, and
will not ring for outside calls. The
handset will ring at the low level for
intercom calls.
L If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (Tone 1 to 3). If you select a
melody, you will not be able to
distinguish lines by their ringers.
L When the ringer volume is set to off, the
handset will not announce caller names
(page 26).
L If you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
38
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
Handset interrupt tone
Call options
This tone lets you know when you receive
a call while you are on an intercom call
(page 31).
Auto talk
“2” (default): The tone will sound 2 times.
“On”: The tone will sound for as long as the
line rings.
When this feature is turned on, you can
answer a call by lifting the handset off the
base unit or charger without pressing
{C}. The default setting is OFF.
“Off”: Turns this feature off.
1 Press {MENU}.
1 Press {MENU}.
2 Scroll to “Ringer setting” by
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
pressing {V} or {^}, then press {>}.
3 Scroll to “Interrupt tone” by
3 Scroll to “Auto talk” by pressing {V}
pressing {V} or {^}, then press {>}.
or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
4 Press {V} or {^} repeatedly to select
the desired setting.
the desired setting.
5 Press {Save}, then press {OFF}.
5 Press {Save}, then press {OFF}.
Note:
Handset Talking Caller ID
L If you subscribe to Caller ID service and
want to view the caller’s information on
the handset display after lifting up the
handset to answer a call, turn off this
feature.
You can turn the Talking Caller ID feature
(page 26) on or off for the handset. The
default setting is ON.
1 Press {MENU}.
2 Scroll to “Talking CallerID” by
Voice enhancer
You can turn the voice enhancer feature on
pressing {V} or {^}, then press {>}.
or off. The default setting is OFF.
3 Press {V} or {^} repeatedly to select
“On” or “Off”.
1 Press {MENU}.
4 Press {Save}, then press {OFF}.
2 Scroll to “Voice enhancer” by
pressing {V} or {^}, then press {>}.
3 Press {V} or {^} repeatedly to select
“On” or “Off”.
4 Press {Save}, then press {OFF}.
L When turned on, “J” will be
displayed.
For assistance, please call 1-800-211-PANA (7262).
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
Caller ID edit
Display options
You can turn the Caller ID number auto
edit feature (page 29) on or off. The default
setting is ON.
Handset LCD contrast
You can adjust the handset display
contrast. There are 6 levels. The default
setting is level 3.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
1 Press {MENU}.
3 Scroll to “Caller ID edit” by
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
pressing {V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
3 Scroll to “LCD contrast” by pressing
“On” or “Off”.
{V} or {^}, then press {>}.
5 Press {Save}, then press {OFF}.
4 Press {V} or {^} repeatedly to select
the desired setting.
5 Press {Save}, then press {OFF}.
Display language
You can select either “English” (default)
or “Español” as the display language.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Change language” by
pressing {V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
the desired language.
L You can also select by pressing
{English} or {Español}.
5 Press {Save} or {Salvar}, then press
{OFF}.
Note:
L If you select a language you cannot
read, press {MENU} {0} {8} {1} {Save}
to change the display language to
English.
40
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
Note:
L The setting should stay at 700 ms unless
pressing {Flash} fails to pick up the Call
Waiting call.
Telephone settings
Dialing mode
L If the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
If you cannot make calls, change this
setting depending on your telephone line
service.
“Tone” (default): For tone dial service.
“Pulse”: For rotary pulse dial service.
Line mode
1 Press {MENU}.
The line mode is preset to “B” and
generally should not be adjusted. If “Line
in use” on the handset is not displayed
properly when another phone connected
to the same line is in use, the line mode
selection is incorrect. Set line mode to “A”.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Set tel line” by pressing
{V} or {^}, then press {>}.
1 Press {MENU}.
4 Scroll to “Set dial mode” by pressing
{V} or {^}, then press {>}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
5 Press {V} or {^} repeatedly to select
the desired setting.
3 Scroll to “Set tel line” by pressing
{V} or {^}, then press {>}.
6 Press {Save}, then press {OFF}.
4 Scroll to “Set line mode” by pressing
Flash time
{V} or {^}, then press {>}.
The flash time depends on your telephone
exchange or host PBX.
You can select: “90ms” (milliseconds),
“100ms”, “110ms”, “250ms”, “300ms”,
“400ms”, “600ms”, or “700ms” (default).
5 Press {V} or {^} repeatedly to select
the desired setting.
6 Press {Save}, then press {OFF}.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Set tel line” by pressing
{V} or {^}, then press {>}.
4 Scroll to “Set flash time” by
pressing {V} or {^}, then press {>}.
5 Press {V} or {^} repeatedly to select
the desired setting.
6 Press {Save}, then press {OFF}.
For assistance, please call 1-800-211-PANA (7262).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
5 Press {V} or {^} repeatedly to select
the desired setting.
Base unit settings
L You can also select the ringer tone by
pressing {1} to {7}.
L If the ringer volume has been turned
off, the base unit will not ring.
Base unit ringer volume
4 levels (high/medium/low/off) are
available. The default setting is HIGH.
6 Press {Save}, then press {OFF}.
Important:
Note:
L Make sure the base unit is not being
used.
L If you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (Tone 1 to 3). If you select a
melody, you will not be able to
Press {<} or {>} repeatedly to select the
desired volume.
distinguish lines by their ringers.
L To stop ringing, press {STOP}.
L If you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you answer
the call.
To turn the ringer off, press and hold {<}
until the unit beeps 2 times.
L “O” will be displayed.
– another person answers the call using
another phone connected on the
same line.
Note:
L When the ringer volume is set to off, the
base unit will not ring for outside calls
and it will ring at the low level for
intercom calls.
Base unit interrupt tone
This tone lets you know when you receive
a call while you are on an intercom call
(page 31).
“2” (default): The tone will sound 2 times.
“On”: The tone will sound for as long as the
line rings.
L When the ringer volume is set to off, the
base unit will not announce caller names
(page 26).
Base unit ringer tone
You can change the base unit ringer tone
heard when an outside call is received.
There are 3 tones and 4 melodies. The
default setting is “Tone 1”.
This feature must be set by using the
handset.
“Off”: Turns this feature off.
This feature must be set by using the
handset.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
1 Press {MENU}.
3 Scroll to “Set base unit” by pressing
2 Scroll to “Initial setting” by
{V} or {^}, then press {>}.
pressing {V} or {^}, then press {>}.
4 Scroll to “Interrupt tone” by
3 Scroll to “Set base unit” by pressing
pressing {V} or {^}, then press {>}.
{V} or {^}, then press {>}.
5 Press {V} or {^} repeatedly to select
4 Scroll to “Ringer tone” by pressing
the desired setting.
{V} or {^}, then press {>}.
6 Press {Save}, then press {OFF}.
42
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
Base unit Talking Caller ID
Other options
This feature must be turned on or off for
the base unit by using the handset (page
26). The default setting is ON.
Handset key tone
You can select whether or not key tones
are heard when keys are pressed.
Includes confirmation tones and error
tones. The default setting is ON.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
1 Press {MENU}.
3 Scroll to “Set base unit” by pressing
{V} or {^}, then press {>}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
4 Scroll to “Talking CallerID” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Key tone” by pressing {V} or
{^}, then press {>}.
5 Press {V} or {^} repeatedly to select
“On” or “Off”.
4 Press {V} or {^} repeatedly to select
“On” or “Off”.
6 Press {Save}, then press {OFF}.
5 Press {Save}, then press {OFF}.
Re-registering the handset
If “No link to base. Move closer
to base, try again.” is displayed
even when the handset is near the base
unit, you may need to re-register the
handset to the base unit.
Important:
L Make sure the base unit is not being
used.
L Have the handset and base unit near
each other when re-registering the
handset.
L KX-TG5452 and KX-TG5453 only:
Confirm the extension number of the
handset which has lost its link to the
base unit by placing the handset on the
base unit or charger.
If you accidentally assign another
handset’s extension number to it, the
other extension will stop functioning.
For assistance, please call 1-800-211-PANA (7262).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
1 Handset:
Time adjustment (Caller ID
subscribers only)
Using this feature, the unit’s date and time
setting will be automatically adjusted when
caller information is received. To turn this
feature on, select “Caller ID[auto]”
(default). To turn off, select “Manual”.
Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
3 Scroll to “Registration” by pressing
{V} or {^}, then press {>}.
4 KX-TG5451 base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE
indicator flashes.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
KX-TG5452 base unit:
Press and hold the locator/handset
button that corresponds to the handset
you want to re-register ({LOCATOR/
INTERCOM 1} or {LOCATOR/
INTERCOM 2}) until the registering
handset number (H1 or H2) is
displayed.
3 Scroll to “Time adjustment” by
pressing {V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
“Manual” or “Caller ID[auto]”.
5 Press {Save}, then press {OFF}.
KX-TG5453 base unit:
Note:
Press {SELECT} repeatedly until the
desired extension number (H1, H2,
or H3) is displayed on the base unit,
then press and hold {CALL}.
L After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
L To use this feature, set the date and time
manually first (page 16).
Customer support
The handset can display the Internet
address where you can download
operating instructions for this product
using your computer.
5 Handset:
Press {OK}, then wait until the handset
1 Press {MENU}.
beeps.
L Registration is complete.
2 Scroll to “Customer support” by
pressing {V} or {^}, then press {>}.
will be displayed.
3 Press {OFF}.
44
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
Programming via direct commands
You can also program most features using “direct commands”—special codes that take
you directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1 Press {MENU}.
2 Enter the desired feature code (shown below).
3 Enter the desired setting code (shown below).
L This step may vary depending on the feature being programmed.
4 Press {Save}.
5 Press {OFF} to exit programming mode.
Direct commands chart
Feature
Feature code
Setting code
Page
Ringer volume
(Handset)
{1} {1}
{1}: Low {2}: Medium
{3}: High {0}: Off
page 38
Ringer tone
(Handset)
{1} {2}
{1}–{3}: Tone pattern 1–3
{4}–{7}: Melody pattern 1–4
page 38
page 39
Interrupt tone
(Handset)
{1} {3}
{1}: On {2}: 2 times {0}: Off
Message play
Date and time
Voice enhancer
{2}
{4}
{5}
{9}
–
page 50
page 16
page 39
page 39
Go to step 3 on page 16.
{1}: On {0}: Off
Talking Caller ID
(Handset)
{1}: On {0}: Off
Copy phonebook
(1 item)
{#} {1}
{#} {1}
{#} {2}
{#} {2}
Go to step 4 on page 24.
Go to step 4 on page 25.
–
page 24
page 25
page 25
page 25
*1
Copy phonebook
*2
(1 item)
Copy phonebook
*1
(all items)
Copy phonebook
{1}–{3}: Extension 1–3
*2
(all items)
LCD contrast
Key tone
{0} {1}
{0} {2}
{0} {3}
{1}–{6}: Level 1–6
{1}: On {0}: Off
{1}: On {0}: Off
page 40
page 43
page 39
Auto talk
For assistance, please call 1-800-211-PANA (7262).
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Settings
Feature
Feature code
Setting code
Page
Caller ID number auto
edit
{0} {4}
{1}: On {0}: Off
page 40
Set dial mode
Set flash time
{0} {5} {1}
{1}: Pulse {2}: Tone
page 41
page 41
{0} {5} {2}
{1}: 700 ms {2}: 600 ms
{3}: 400 ms {4}: 300 ms
{5}: 250 ms {6}: 110 ms
{7}: 100 ms {8}: 90 ms
Set line mode
Ring count
{0} {5} {3}
{1}: A {2}: B
page 41
page 54
{0} {6} {1}
{2}–{7}: 2–7 rings
{0}: Toll saver
Recording time
{0} {6} {2}
{1}: 1 minute
page 55
{2}: 2 minutes
{3}: 3 minutes
{0}: Greeting only
Remote code
{0} {6} {3}
{0} {8}
Go to step 5 on page 54.
{1}: English {2}: Spanish
{1}: On {0}: Off
page 54
page 40
page 55
page 42
Change language
Message alert
{0} {#}
Ringer tone
(Base unit)
{0} {*} {1}
{1}–{3}: Tone pattern 1–3
{4}–{7}: Melody pattern 1–4
Interrupt tone
(Base unit)
{0} {*} {2}
{0} {*} {4}
{0} {9}
{1}: On {2}: 2 times {0}: Off
page 42
page 43
page 44
page 44
Talking Caller ID
(Base unit)
{1}: On {0}: Off
Time adjustment
{1}: Caller ID[auto]
{0}: Manual
Handset registration
{0} {0}
Go to step 4 on page 44.
*1 KX-TG5452 only
*2 KX-TG5453 only
Note:
L If you make a mistake or enter the wrong code, press {OFF} then start again by
pressing {MENU}.
46
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Features
Answering system
Recording your greeting
message
The unit contains an answering system
which can answer and record calls for you
when you are unavailable to answer the
phone.
For details about memory capacity, see
page 51.
You can record your own greeting
message (max. 2 minutes) that will be
played when the answering system
answers a call. If you do not record a
greeting message, a pre-recorded
greeting message will be used.
Important:
Sample greeting message: “This is (your
name). We are unable to answer the
phone right now. Please leave a message
after the beep. Thank you.”
L Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
L When callers leave messages, the unit
records the day and time of each
message. Make sure the date and time
have been set (page 16).
{GREETING REC}
{GREETING CHECK}
L You can select the caller’s recording
time (page 55).
{STOP}
MIC
1 Press {GREETING REC}.
L The unit announces “To record
greeting, press record again.”
2 Within 10 seconds, press {GREETING
REC} again.
3 After the unit beeps, speak clearly
about 20 cm (8 inches) away from the
MIC.
L The display will show the elapsed
recording time.
4 To stop recording, press {GREETING
REC} or {STOP}.
Note:
L If the greeting message is less than 1
second long, the unit beeps 6 times and
announces, “Your greeting was not
recorded. Record your greeting again.”
For assistance, please call 1-800-211-PANA (7262).
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Features
To play back the greeting message
Press {GREETING CHECK}.
Turning the answering
system on/off
Erasing your greeting message
Press {GREETING CHECK}, and then
press {ERASE} while your greeting
message is playing.
ANSWER ON
indicator
L If you do not re-record your greeting
message, the unit will use a pre-
recorded greeting message.
{ANSWER ON}
{<}, {>}
Pre-recorded greeting message
If you do not record a greeting message,
one of 2 pre-recorded messages will be
played when a call is received depending
on the caller’s recording time (page 55).
Press {ANSWER ON}.
L When the answering system is turned
on, the ANSWER ON indicator lights
and the unit announces “Answer set”
and the day and time.
– When the recording time is set to
“1min”, “2min”, or “3min”:
“Hello, we are not available now. Please
leave your name and phone number
after the beep. We will return your call.”
L When the answering system is turned
off, the ANSWER ON indicator turns off
and the unit announces “Answer off”.
– When the recording time is set to
“Greeting only”:
“Hello, we are not available now. Please
call again. Thank you for your call.”
To play back the pre-recorded greeting,
press {GREETING CHECK}.
Screening your calls
While a caller is leaving a message, you
can listen to the call through the base unit’s
speaker. To adjust the speaker volume,
press {>} or {<} repeatedly.
You can answer the call by pressing {C}
or {s}.
To turn off the call screening feature
When the base unit is not in use, press
{GREETING CHECK}, then press {<}
repeatedly until “0” is displayed.
OR
While screening, press {<} repeatedly
until “0” is displayed.
Note:
L If you adjust the speaker volume while
listening to messages or talking on the
intercom, the speaker volume for call
screening will be turned on again.
48
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Features
Note:
L The display shows the message number
during playback.
Listening to messages
When new messages have been
recorded:
L During playback, the unit will announce
the day and time that each message
was recorded. (Voice time/day stamp)
– The MESSAGE indicator on the base
unit will flash.
L At the end of the last message, the unit
– The message indicator on the handset
will flash slowly if the message alert
feature is turned on (page 55).
announces “End of final message”.
To adjust the speaker volume
9 levels (high to off) are available. Press
{>} or {<} repeatedly while using the
answering system.
The base unit display will show the number
of messages (old and new) recorded by
the answering system.
Example: The total number of recorded
messages is 10.
Repeating a message
Press {<} while listening to the
message.
L If pressed within the first 5 seconds of a
message, the previous message will be
played.
Listening to messages using
the base unit
Skipping a message
Press {>} to play the next message.
Pausing message playback
Press {STOP}.
{ERASE}
{<}, {>}
L To resume playback, press
{MESSAGE}.
L To stop playback completely, press
MESSAGE
indicator
{STOP} again.
{MESSAGE}
{STOP}
Erasing a specific message
Press {ERASE} while listening to the
message you want to erase.
{<}, {>}
Press {MESSAGE}.
Erasing all messages
L The unit will announce the number of
new messages and will play back the
new messages.
1 Press {ERASE} while the base unit is
not being used.
L The unit will announce “To erase all
messages, press ERASE again.”
L When you have no new messages, the
unit will announce “No new messages.
All message playback”, and will play
back all messages.
2 Within 10 seconds, press {ERASE}
again.
L The unit will announce “No
messages”.
For assistance, please call 1-800-211-PANA (7262).
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Features
Note:
L At the end of the last message, the unit
announces “End of final message”.
L Caller information for the erased
messages will remain in the caller list.
Voice guidance
If you do not press any buttons after the
last message is played back, the unit’s
voice guidance starts. Operate the
answering system by following the
guidance as necessary.
Listening to messages using
the handset
The unit will announce “Press 4 to play
back new messages. Press 5 to play back
all messages.”
L You can press buttons for other
playback options (see below) even if the
voice guidance has started.
{MENU}
{Select}
L If you do not press any button within 10
seconds after the voice guidance, the
handset returns to standby mode.
{OFF}
Answering system commands
You can also operate the answering
system by pressing dial keys.
To use the following commands, press
{MENU}, then press {Select} at
“Message play”.
When new messages have been
recorded, “New message” is displayed.
1 Press {MENU}.
Key
Command
2 Press {Select} at “Message play”.
{1} or {<} Repeat message (during
L The unit will announce the number of
new messages, and will play back the
new messages.
*1
playback)
{2} or {>} Skip message (during
playback)
L To switch to the receiver and to listen
to the messages with privacy, press
{C}. You can switch back to the
speaker by pressing {s}.
L When you have no new messages,
the unit will announce “No new
messages. All message playback”,
and will play back all messages.
{4}
{5}
{8}
{9}
{0}
Play new messages
Play all messages
Turn answering system on
*2
Stop playback
Turn answering system off
{CLEAR} Erase this message (during
or {*}{4} playback)
L After the last message is played
back, the unit’s voice guidance starts.
Follow the guidance as necessary.
{*}{5}
Erase all messages
*1 If pressed within the first 5 seconds of a
message, the previous message will be
played.
3 Press {OFF} when finished.
Note:
*2 To resume operation, press a command
key within 15 seconds, or the voice
guidance will start.
L Adjust the speaker or receiver volume
using {V} or {^}.
50
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Features
Calling back (Caller ID subscribers
only)
Memory capacity
If Caller ID information was received for
the call, you can call the caller back while
listening to a message.
The total recording capacity (including
your greeting message and caller
messages) is about 21 minutes. A
maximum of 64 messages (including a
greeting message) can be recorded.
Press {Call} during playback.
Note:
L If message memory becomes full:
– “E” flashes on the base unit.
– the ANSWER ON indicator flashes
rapidly (if the answering system is
turned on).
L To edit the number before calling back,
press {Edit} repeatedly to select the
desired format (page 29), then press
{Call}, {C}, or {s}.
– the unit announces “Memory full”
when operating the answering
system.
To record additional messages, erase
unnecessary messages.
L If less than 3 minutes of recording time is
available, the unit will announce the
remaining recording time when
operating the answering system.
L Messages are retained even if a power
failure occurs. All messages are saved
until you erase them. (Flash memory
message backup)
L The total recording capacity may be
reduced by the calling party’s
background noise.
For assistance, please call 1-800-211-PANA (7262).
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Features
Voice guidance
Remote operation
During remote operation, the unit’s voice
guidance will prompt you to press {1} to
perform a specific operation, or press {2}
to listen to more available operations.
Operations are presented by voice
guidance in the following order:
Using a touch tone phone, you can call
your phone number from outside and
access the unit to listen to messages. The
unit’s voice guidance will prompt you to
press certain dial keys to perform different
operations.
– Play back all messages
– Play back new messages
– Record a message
Important:
L In order to operate the answering
system remotely, you must first set a
remote code (page 54). This code must
be entered each time you operate the
answering system remotely.
– Erase all messages
– Record your greeting message
Note:
L If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit will announce, “Thank
you for your call” then disconnect your
call.
Using the answering system
remotely
1 Dial your phone number from a touch
L If less than 3 minutes of recording time is
available, the unit will announce the
remaining recording time after the last
message is played back.
tone phone.
L If the ring count is set to “Toll
saver” (page 54), the number of
rings you hear will indicate whether or
not you have new messages.
L If the unit announces “Memory full”,
erase unnecessary messages.
2 After the greeting message starts, enter
your remote code.
L The unit will announce the number of
new messages, and will play back the
new messages.
3 After 3 seconds, the voice guidance will
start. Follow the voice guidance as
necessary.
4 When finished, hang up.
Note:
L When you press a key, press firmly.
L You can hang up at any time.
L You can ignore the voice guidance and
control the unit using remote
commands.
52
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Features
Remote commands
Skipping the greeting message to leave
a message
You can leave a message just as any
outside caller can. Call your phone
number, then press {*} to skip the
greeting message and record your
message after the beep.
You can press dial keys to access certain
answering system functions without
waiting for the voice guidance to prompt
you.
Key
Remote command
{1}
Repeat message (during
playback)
*1
{2}
Skip message (during
playback)
{4}
{5}
{7}
{9}
{0}
Play new messages
Play all messages
Record a greeting message
*2
Stop (recording, playback)
Turn answering system off
{*}{4} Erase this message (during
playback)
{*}{5} Erase all messages
*1 If pushed within the first 5 seconds of a
message, the previous message will be
played.
*2 To resume operation, enter a remote
command within 15 seconds, or the
voice guidance will start.
Turning on the answering system
remotely
If the answering system is off, you can turn
it on remotely.
1 Dial your phone number.
2 Let the phone ring 15 times.
L The unit will answer your call with the
greeting message.
L You can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation (page 52).
For assistance, please call 1-800-211-PANA (7262).
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Features
Ring count
Answering system
settings
You can change the number of times the
phone rings before the unit answers calls.
You can select “2”, “3”, “4” (default), “5”,
“6”, “7”, or “Toll saver”.
“Toll saver”: The unit answers on the
2nd ring when new messages have been
recorded, and on the 4th ring when there
are no new messages. If you call your
phone from outside to listen to new
messages (page 52), you will know that
there are no messages when the phone
rings for the 3rd time. You can then hang
up without being charged for the call.
Remote code
A remote code must be entered when
operating the answering system remotely.
This code prevents unauthorized parties
from listening to your messages remotely.
Store any 2-digit number (00–99). The
default setting is “11”.
1 Press {MENU}.
2 Scroll to “Initial setting” by
1 Press {MENU}.
pressing {V} or {^}, then press {>}.
2 Scroll to “Initial setting” by
3 Scroll to “Set answering” by pressing
pressing {V} or {^}, then press {>}.
{V} or {^}, then press {>}.
3 Scroll to “Set answering” by pressing
4 Scroll to “Remote code” by pressing
{V} or {^}, then press {>}.
{V} or {^}, then press {>}.
4 Scroll to “Ring count” by pressing {V}
5 Select the desired remote code by
or {^}, then press {>}.
entering a 2-digit number (00–99).
5 Press {V} or {^} repeatedly to select
6 Press {Save}, then press {OFF}.
the desired setting.
Note:
L You can also select the ring count by
pressing {0} (“Toll saver”), or {2}
to {7}.
L To confirm the remote code, repeat
steps 1 to 4. Press {OFF} when finished.
6 Press {Save}, then press {OFF}.
Note:
L Usually the unit will announce the
caller’s name after the 2nd ring. If you
turn on the answering system, and set
the ring count to “2”, the unit will not
announce the caller’s name. If “Toll
saver” is selected, and there is a new
message, the unit will not announce the
caller’s name.
54
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Answering System Features
Message alert
Caller’s recording time
You can change the maximum message
recording time allotted to each caller.
“1min”, “2min”, or “3min” (default): Caller
messages are limited to 1 minute to 3
minutes.
You can select whether or not the
message indicator on the handset will
flash when new messages have been
recorded (page 49). The default setting is
OFF.
“Greeting only”: The unit plays the
greeting message but does not record
caller messages.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press {>}.
1 Press {MENU}.
3 Scroll to “Message alert” by pressing
2 Scroll to “Initial setting” by
{V} or {^}, then press {>}.
pressing {V} or {^}, then press {>}.
4 Press {V} or {^} repeatedly to select
3 Scroll to “Set answering” by pressing
“On” or “Off”.
{V} or {^}, then press {>}.
5 Press {Save}, then press {OFF}.
4 Scroll to “Recording time” by
pressing {V} or {^}, then press {>}.
Note:
L The message indicator will not flash for
new messages while the handset is in
use.
5 Press {V} or {^} repeatedly to select
the desired setting.
L You can also select the recording
time by pressing {1} to {3}, or {0}
(“Greeting only”).
L While message alert is on, battery
operating time will be shortened (page
12).
6 Press {Save}, then press {OFF}.
Note:
L If message memory becomes full, the
unit will automatically switch to the
“Greeting only” mode.
For assistance, please call 1-800-211-PANA (7262).
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Wall mounting
Base unit
The base unit can be mounted on a wall phone plate.
1 Connect the AC adaptor.
Fasten the AC adaptor cord.
Hook
To power
outlet
2 Tuck the telephone line cord inside the wall mounting adaptor (1).
Connect the telephone line cord (2).
1
2
3 Insert the hooks on the wall mounting adaptor into the holes (A) and (B) on the base
unit.
56
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until
it clicks into place.
5 Connect the telephone line cord. Mount the unit, then slide it down.
L Raise the antennas.
To remove the wall mounting adaptor
While pushing down the release levers (1), remove the adaptor (2).
2
For assistance, please call 1-800-211-PANA (7262).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Charger unit (KX-TG5452 and KX-TG5453 only)
The charger can be wall mounted, as shown below.
1 Connect the AC adaptor.
2 Drive the screws (not included) into the wall using the wall mount template (see below).
3 Mount the charger (1).
4 Slide it down (2) and to the right (3) until it is secure.
25.4 mm
(1")
1
2
3
Screws
To power
outlet
58
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Belt clip
Headset (optional)
You can hang the handset on your belt or
pocket using the included belt clip.
Connecting an optional headset to the
handset allows hands-free phone
conversations. Please use only a
Panasonic headset. See page 5 for
compatible headsets and ordering
information.
To attach the belt clip
To connect an optional headset to the
handset
To remove the belt clip
While pressing the top of the clip (1), pull
the right edge in the direction of the arrow
(2).
Headset jack
2
1
L Model shown is KX-TCA86.
Note:
L To switch to the speakerphone, press
{s}. To return to the headset, press
{C}.
For assistance, please call 1-800-211-PANA (7262).
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Error messages
If the unit detects a problem, one of the following messages will be displayed on the
handset.
Display message
Cause & solution
*1
Busy
L The called handset or base unit is in use.
L The handset you tried to copy phonebook items to is in
*1
use.
L The handset you are calling is too far from the base
*1
unit.
Error!!
L When you tried to register the handset, the handset and
the base unit could not link for some reason, such as
interference from electrical appliances. Move the
handset and the base unit away from the electrical
appliances and try again.
L Another handset tried to send phonebook items to you
but there was an error. Have the other handset user re-
*1
send the items to you (page 24).
---Incomplete---
Phonebook full
L When the phonebook item(s) was(were) sent to another
handset, the handset’s phonebook memory was full
and copying stopped. Press {OFF} to exit. Erase items
from the other handset’s phonebook (page 23). When
phonebook memory is available, you can copy all
phonebook items (page 25) or individual items one by
*1
one (page 24, 25).
No link to base.
Move closer to
base, try again.
L The handset has lost communication with the base unit.
Move closer to the base unit, and try again.
L Confirm that the base unit’s AC adaptor is plugged in.
L Raise the base unit antennas.
L The handset’s registration may have been canceled.
Re-register the handset (page 43).
Phonebook full
No items stored
L There is no space to store new items in the phonebook.
Erase unnecessary items (page 23).
L Your phonebook or redial list is empty.
Please lift up and
try again.
L A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.
System is busy.
Please try again
later.
L The handset has lost communication with the base unit.
Move closer to the base unit and try again.
*1
L More than one unit is in use. Try again later.
L Another user is listening to messages. Try again later.
*1 KX-TG5452 and KX-TG5453 only
60
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Troubleshooting
General use
Problem
Cause & solution
The unit does not work.
L Make sure that the battery is installed correctly (page
10).
L Check the connections (page 9).
L Fully charge the battery (page 11).
L Clean the charge contacts and charge again (page 11).
L Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L Re-install the battery (page 10) and fully charge it.
The display shows “No
link to base. Move
closer to base, try
again.” and an alarm
tone sounds.
L The handset is too far from the base unit. Move closer
and try again.
L Plug in the base unit’s AC adaptor.
L Raise the base unit antennas.
L If the above remedies do not solve the problem, the
handset may have lost communication with the base
unit. Register the handset again (page 43).
I cannot hear a dial tone.
L Confirm that the telephone line cord is connected (page
9).
L Disconnect the unit from the telephone line and connect
a known working telephone. If the working telephone
operates properly, contact our service personnel to
have the unit repaired. If the working telephone does
not operate properly, contact your telephone company.
Programmable settings
Problem
Cause & solution
I cannot program items.
L Programming is not possible while the handset and
base unit are being used.
L Do not pause for over 1 minute while programming.
L Move closer to the base unit.
L While another user is listening to messages or the
answering system is answering a call, you cannot
program. Try again later.
While programming, the
handset starts to ring.
L A call is being received. Answer the call and start again
from the beginning after hanging up.
For assistance, please call 1-800-211-PANA (7262).
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Making/answering calls, Intercom
Problem
Cause & solution
Static is heard, sound
cuts in and out.
L Move the handset and the base unit away from other
electrical appliances.
Interference from other
electrical units.
L Move closer to the base unit.
L Raise the base unit antennas.
L Turn on the clarity booster feature (page 20).
L If your unit is connected to a telephone line with xDSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your xDSL provider for details.
The handset and base
unit do not ring.
L The ringer volume is turned off. Adjust it (page 38, 42).
I cannot make a call.
L The dialing mode may be set incorrectly. Set the dial
mode (page 41) to match the type of telephone service
you have (tone or pulse).
L If the base unit (including answering system) or another
handset is in use, you may not be able to make a call.
Try again later.
L While listening to messages using the handset, you
cannot make a call. Exit by pressing {OFF}.
I cannot redial by
pressing {REDIAL}.
L If the last number dialed was more than 48 digits long,
the number will not be redialed correctly.
L If you press {REDIAL} after you have started dialing,
this button functions as the {PAUSE} button. To redial,
do not dial any numbers before pressing {REDIAL}.
I cannot have a
conversation using the
headset.
L Make sure that an optional headset is connected
properly (page 59).
L If “SP-phone” is displayed on the handset, press {C}
to switch to the headset.
I cannot make long
distance calls.
L Make sure that you have long distance service.
I cannot page the
L The called handset is too far from the base unit.
handset or base unit.
L The called unit is in use. Try again later.
Phonebook
Problem
Cause & solution
I cannot store an item in
the phonebook.
L You cannot store an item in the phonebook while the
handset is in talk, speakerphone or intercom mode, or
while listening to messages.
L Do not pause for over 1 minute while storing.
62
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Problem
Cause & solution
While storing an item in
the phonebook, the
L A call is being received. Answer the call and start again
from the beginning after hanging up.
handset starts to ring.
Copying stopped with an
item displayed.
L The destination handset may have lost communication
with the base unit, or the destination handset user may
have pressed {C} or {s}.
The displayed phonebook item was not copied to the
handset. Press {OFF}. Confirm that the destination
handset is in standby mode (i.e., not in use) and try
again.
The display exits the
phonebook while
searching.
L The handset automatically exits after 1 minute of
inactivity.
Caller ID
Problem
Cause & solution
The handset does not
display the caller’s name
and/or phone number.
L You have not subscribed to Caller ID service. Contact
your telephone company to subscribe.
L If your unit is connected to any additional telephone
equipment such as Caller ID box or wireless telephone
jack, disconnect the unit from the equipment and plug
the unit directly into the wall jack.
L If your unit is connected to a telephone line with xDSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your xDSL provider for details.
L The name display service may not be available in some
areas. Contact your telephone company for details.
L Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L The caller requested not to send caller information
(page 26).
L If a call is being transferred to you, the caller information
will not be displayed.
L Generally caller information is displayed from the 2nd
ring.
The handset or base unit
does not announce the
displayed caller names.
L The handset or base unit’s ringer volume is turned off.
Adjust it (page 38, 42).
L The Talking Caller ID feature is turned off. Turn it on
(page 39, 43).
L Caller names will usually be announced after the 2nd
ring.
L The ring count for the answering system is set to “2” or
“Toll saver”. Select a different setting (page 54).
For assistance, please call 1-800-211-PANA (7262).
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Problem
Cause & solution
The handset or base unit
does not announce the
displayed caller’s name
correctly.
L Name pronunciation may vary. This feature may not
pronounce all names correctly.
L The handset or base unit will announce each letter of
abbreviations, such as “Co.” and “Inc.”.
L Caller ID supports name of up to 15 letters. If the caller’s
name has more than 15 letters, the name will not be
announced correctly.
The caller list/incoming
phone numbers are not
edited automatically.
L The Caller ID number auto edit feature is turned off.
Turn it on and try again (page 40).
L You need to call back the edited number to activate
Caller ID number auto edit.
I cannot dial the phone
number edited in the
caller list.
L The phone number you dialed might have an incorrect
edited pattern (for example, the long distance “1” or the
area code is missing). Edit the phone number with
another pattern (page 29).
The display exits the
L The handset automatically exits after 1 minute of
caller list while searching.
inactivity.
Answering system
Problem
Cause & solution
I cannot listen to
messages from a remote
location.
L A touch tone phone is required for remote operation.
L Press the remote code correctly and press each key
firmly (page 52).
L The answering system is off. Turn it on (page 53).
The other party
complains that they
cannot leave a voice
message.
L The recording time is set to “Greeting only”. Select
“1min”, “2min”, or “3min” (page 55).
L The memory is full. Erase unnecessary messages
(page 49).
“E” flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
L Message memory is full. Erase unnecessary messages
(page 49).
I cannot operate the
answering system.
L Someone is operating the answering system.
L If someone is talking on a conference call, you cannot
operate the answering system. Try again later.
During message
L A call is being received. Answer the call and start again
playback, the unit rings
and cancels playback.
from the beginning after hanging up.
The message indicator
on the handset flashes
slowly.
L New messages have been recorded. Listen to the new
messages (page 49) or turn the message alert off (page
55).
64
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Problem
Cause & solution
When you play back
messages or turn on the
answering system, the
base unit and handset
announce the day and
time incorrectly.
L Set the date and time again (page 16).
Battery charge
Problem
Cause & solution
“Recharge battery” is
displayed, 7 flashes
or the handset beeps
intermittently.
L Fully charge the battery (page 11).
“Charge for 6h” and
8 are displayed and
the handset does not
work.
L The battery has been discharged. Fully charge the
battery (page 11).
I charged the battery fully,
but “Recharge
battery” is still
L Clean the charge contacts and charge again (page 11).
L The battery may need to be replaced (page 12). If you
install a new battery, fully charge it (page 11).
displayed and/or 7
continues to flash, or
“Charge for 6h” and
8 are displayed.
The CHARGE indicator
does not go out after the
battery has been
charged.
L This is normal.
The handset display is
blank.
L Confirm that the battery is properly installed.
L Fully charge the battery (page 11).
Power failure
Problem
Cause & solution
The unit will not function.
L This product is not designed to make calls in the event
of a power failure. We recommend connecting a
standard telephone to the same telephone line in the
event that emergency calls need to be made during a
power failure (page 9).
For assistance, please call 1-800-211-PANA (7262).
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Important information about subscription services
In order to use Caller ID, Call Waiting, or Call Waiting Caller ID (CWID), you must first
contact your telephone company and subscribe to the desired service.
L For more information, contact your telephone company.
If the Call Waiting Caller ID (CWID) feature does not function:
L You may need to contact your telephone company to activate this specific service, even
if you already subscribed to both Caller ID and Call Waiting with Caller ID services
(CWID).
If you subscribe to a flat-rate bundle service that includes Caller ID, Call Waiting,
Voice Mail, and unlimited local/regional/long distance calls, please read the
following:
L To use the Voice Mail service provided by the telephone company rather than the unit’s
answering system, turn off the answering system by pressing {ANSWER ON} on the
base unit.
This unit does not have an indicator to indicate if there are new messages in your
mailbox service.
L To use this unit’s answering system rather than the Voice Mail service provided by your
telephone company, please contact your telephone company to deactivate your Voice
Mail service.
If the telephone company cannot do this, set this unit’s “Ring count” setting so that
this unit’s answering system answers calls before the telephone company’s Voice Mail
service tries to answer your calls. It is necessary to check the ring count required to
activate the Voice Mail service provided by your telephone company before changing
this setting.
Example: To set the ring count to “2”, see page 46.
66
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
FCC and other information
This equipment complies with Part 68 of
the FCC rules and the requirements
adopted by the ACTA. On the bottom of
this equipment is a label that contains,
among other information, a product
identifier in the format US:ACJ----------.
If requested, this number must be
provided to the telephone company.
L Registration No
notify the customer as soon as possible.
Also, you will be advised of your right to
file a complaint with the FCC if you
believe it is necessary.
The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment. If
this happens the telephone company will
provide advance notice in order for you
to make necessary modifications to
maintain uninterrupted service.
............(found on the bottom of the unit)
L Ringer Equivalence No.
(REN).......0.1B
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular
plug is provided with this product. It is
designed to be connected to a
If trouble is experienced with this
equipment, for repair or warranty
information, please contact a Factory
Servicenter or other Authorized Servicer.
If the equipment is causing harm to the
telephone network, the telephone
company may request that you
disconnect the equipment until the
problem is resolved.
compatible modular jack that is also
compliant.
The REN is used to determine the
number of devices that may be
Connection to party line service is
subject to state tariffs. Contact the state
public utility commission, public service
commission or corporation commission
for information.
connected to a telephone line. Excessive
RENs on a telephone line may result in
the devices not ringing in response to an
incoming call. In most but not all areas,
the sum of RENs should not exceed five
(5.0). To be certain of the number of
devices that may be connected to a line,
as determined by the total RENs, contact
the local telephone company. For
products approved after July 23, 2001,
the REN for this product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits
If your home has specially wired alarm
equipment connected to the telephone
line, ensure the installation of this
equipment does not disable your alarm
equipment. If you have questions about
what will disable alarm equipment,
consult your telephone company or a
qualified installer.
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
This equipment is hearing aid compatible
as defined by the FCC in 47 CFR
Section 68.316.
If this equipment causes harm to the
telephone network, the telephone
company will notify you in advance that
temporary discontinuance of service may
be required. But if advance notice isn’t
practical, the telephone company will
For assistance, please call 1-800-211-PANA (7262).
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
When you hold the phone to your ear,
noise might be heard in your Hearing Aid.
Some Hearing Aids are not adequately
shielded from external RF (radio
frequency) energy. If noise occurs, use
an optional headset accessory or the
speakerphone option (if applicable) when
using this phone. Consult with your
audiologist or Hearing Aid manufacturer
about the availability of Hearing Aids
which provide adequate shielding to RF
energy commonly emitted by digital
devices.
CAUTION:
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
device.
NOTE:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain
to the dispatcher the reason for the
call.
2) Perform such activities in the off-peak
hours, such as early morning or late
evenings.
The software contained in this equipment
to allow user access to the network must
be upgraded to recognize newly
established network area codes and
exchange codes as they are placed into
service.
− Reorient or relocate the receiving
antenna.
Failure to upgrade the premises systems
or peripheral equipment to recognize the
new codes as they are established will
restrict the customer and the customer’s
employees from gaining access to the
network and to these codes.
− Increase the separation between the
equipment and receiver.
− Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
− Consult the dealer or an experienced
radio/TV technician for help.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Some cordless telephones operate at
frequencies that may cause interference
to nearby TVs and VCRs. To minimize or
prevent such interference, the base of
the cordless telephone should not be
placed near or on top of a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the
TV or VCR. This will often reduce, or
eliminate, interference.
Privacy of communications may not be
ensured when using this phone.
68
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
FCC RF Exposure Warning:
This product complies with FCC radiation
exposure limits set forth for an
openLCR service for the
Caller IQ feature
uncontrolled environment. To comply
with FCC RF exposure requirements the
base unit must be installed and operated
with its antenna located 20 cm or more
between antenna and all person’s body
(excluding extremities of hands, wrist
and feet). The handset unit may be
carried and operated with only the
specific provided belt-clip. Other non-
tested belt-clips or similar body-worn
accessories may not comply and must
be avoided. The base and handset units
must not be co-located or operated in
conjunction with any other antenna or
transmitter.
This unit is compatible with service
provided by openLCR.
Important:
See the leaflet included with this unit for
more information.
L If you have any questions regarding
the openLCR service, visit
at 1-866-openLCR (1-866-673-6527).
L NEITHER PANASONIC
COMMUNICATIONS CO., LTD. NOR
PANASONIC CORPORATION OF
NORTH AMERICA IS IN ANY WAY
AFFILIATED WITH, OR
RESPONSIBLE FOR THE ACTS OR
OMISSIONS OF, OPENLCR.COM, INC.
NEITHER PANASONIC
COMMUNICATIONS CO., LTD. NOR
PANASONIC CORPORATION OF
NORTH AMERICA NOR ANY OF
THEIR EMPLOYEES OR AFFILIATES
OR CUSTOMERS MAKE ANY
WARRANTIES OR
REPRESENTATIONS, EITHER
EXPRESS OR IMPLIED, TO ANY
CUSTOMER OR ANY OTHER THIRD
PARTY WITH RESPECT TO ANY OF
THE SERVICES PROVIDED BY
OPENLCR.COM, INC., NOR ASSUME
NOR CREATE ANY OTHER
OBLIGATION OF ANY KIND ON
BEHALF OF OPENLCR.COM, INC.
L The Caller IQ service can only be
activated after registering with openLCR
information regarding the openLCR
service is available on the Internet at
For assistance, please call 1-800-211-PANA (7262).
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Charger unit (KX-TG5452 and
KX-TG5453 only)
Technical information
Base unit
Operating environment:
5 °C – 40 °C (41 °F – 104 °F)
Operating environment:
Dimensions:
5 °C – 40 °C (41 °F – 104 °F)
Approx. height 71 mm x width 88 mm x
13
15
15
Frequency:
5.76 GHz – 5.84 GHz
depth 100 mm (2
/
" x 3
/
" x 3
/
")
16
32
16
Mass (Weight):
Approx. 110 g (0.24 lb.)
Dimensions:
Approx. height 95 mm x width 174 mm x
depth 143 mm (3 / " x 6
3
27
5
Power consumption:
Standby: Approx. 0.8 W
Maximum: Approx. 3.0 W
/
" x 5 / ")
4
32
8
Mass (Weight):
Approx. 320 g (0.71 lb.)
Power supply:
AC adaptor (120 V AC, 60 Hz)
Power consumption:
Standby: Approx. 2.3 W
Note:
Maximum: Approx. 5.5 W
L Design and specifications are subject to
change without notice.
Power supply:
AC adaptor (120 V AC, 60 Hz)
L The illustrations in these instructions
may vary slightly from the actual
product.
Handset
Operating environment:
5 °C – 40 °C (41 °F – 104 °F)
Frequency:
5.76 GHz – 5.84 GHz
Dimensions:
Approx. height 173 mm x width 48 mm x
13
7
5
depth 33 mm (6
/
" x 1 / " x 1 / ")
16 16
8
Mass (Weight):
Approx. 170 g (0.37 lb.)
Power supply:
Ni-MH battery (3.6 V, 830 mAh)
Security codes:
1,000,000
70
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Warranty
PANASONIC CONSUMER
ELECTRONICS COMPANY, DIVISION
OF PANASONIC CORPORATION OF
NORTH AMERICA
PANASONIC PUERTO RICO, INC.
San Gabriel Industrial Park,
Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
One Panasonic Way,
Secaucus, New Jersey 07094
Panasonic Telephone Products
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto
Rico, Inc. (collectively referred to as “the warrantor”) will, for the length of the period
indicated on the chart below, which starts with the date of original purchase
(“Limited Warranty period”), at its option either (a) repair your product with new or
refurbished parts, or (b) replace it with a new or a refurbished product. The decision
to repair or replace will be made by the warrantor.
Parts
Labor
One (1) Year
One (1) Year
During the “Labor” Limited Warranty period there will be no charge for labor. During
the “Parts” Limited Warranty period, there will be no charge for parts. You must
mail-in your product during the Limited Warranty period. This Limited Warranty
excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet).
This Limited Warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This Limited Warranty is extended only to the original
purchaser and only covers products purchased as new.
Mail-In Service
For assistance in the continental U.S.A. in obtaining repairs please ship the product
to:
Panasonic Services Company Customer Servicenter
4900 George McVay Drive Suite B Door #12 McAllen, TX 78503
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or
fax (787)-768-2910.
For Limited Warranty service for headsets if a headset is included with this product
please call Panasonic Call Center at 1-800-211-PANA (7262).
When shipping the unit carefully pack, include all accessories, and send it prepaid,
adequately insured and preferably in the original carton. Include a letter detailing
the complaint and provide a day time phone number where you can be reached.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF
OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND
PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR
OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
For assistance, please call 1-800-211-PANA (7262).
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
The Limited Warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by the warrantor,
or failures which result from accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up adjustments, misadjustment of
consumer controls, improper maintenance, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use such as
hotel, office, restaurant, or other business or rental use of the product, or service by
anyone other than a Factory Servicenter or other Authorized Servicer, or damage
that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE
OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED
WARRANTY. (As examples, this excludes damages for lost time, lost calls or
messages, cost of having someone remove or re-install an installed unit if
applicable, travel to and from the servicer. The items listed are not exclusive, but
are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions
may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have other
rights which vary from state to state. If a problem with this product develops during or
after the Limited Warranty period, you may contact your dealer or Servicenter. If the
problem is not handled to your satisfaction, then write to the warrantor’s Consumer
Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
72
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Information
Customer services
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Servicenter; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at: 1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and
Personal Checks)
TTY users (hearing or speech impaired users) can call 1-866-605-1277.
Service in Puerto Rico
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
For assistance, please call 1-800-211-PANA (7262).
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Flash button: 20
Flash time: 41
Function menu
Direct commands: 45
Table: 36
Index
A Accessories: 5
Answering calls: 18
Answering system: 47
Auto talk: 18, 39
G Greeting message: 47
H Handset locator: 31, 32, 33
Headset, optional: 59
Hold: 19
B Backlit display: 15
Backlit handset keypad: 15
Base unit location: 8
Battery
I
Installation
AC adaptor: 9
Base unit: 9
Charger unit: 9
Telephone line cord: 9
Intercom
Charge: 11
Installation: 10
Performance: 12
Replacement: 12
Strength: 11
Call: 31
Paging: 31
Belt clip: 59
C Caller ID edit: 40
Caller ID number auto edit: 29
Caller ID service: 26
Caller list
Interrupt tone
Base unit: 42
Handset: 39
K Key tone: 43
Calling back: 28
Editing: 29
Erasing: 30
Storing: 29
Viewing: 28
Call screening: 48
Call share: 20
Call Waiting Caller ID: 26
Call waiting tone: 21
Chain dial: 24
Clarity booster: 20
Conf (Conference): 35
Conference calls: 35
Controls: 13
Copy phonebook: 24, 25
Customer support: 44
L
LCD contrast: 40
Light-up ID: 27
Line mode: 41
Listening to messages
Base unit: 49
Handset: 50
Touch tone phone: 52
M Making calls: 17
Memory capacity: 51
Message alert: 55
Microphone
Base unit: 31, 47
Handset: 17
Mute: 19
N Navigator key: 14
Noise: 8
D Date and time: 16
Dialing mode: 41
Display
P
Pause: 20
Phonebook
Adding: 22
Calling: 23
Copying: 24, 25
Editing: 23
Erasing: 23
Names: 22
Power failure: 9, 16, 65
Pulse service: 21
Base unit: 15
Handset: 15
Display language: 40
E
Erasing all messages: 49, 50, 53
Erasing a message: 49, 50, 53
Error messages: 60
Extension number: 32, 33
F
FCC and other information: 67
74
For assistance, please call 1-800-211-PANA (7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
R Recording time: 55
Redial: 17
W Wall mounting
Base unit: 56
Redial list: 18
Charger unit: 58
Warranty: 71
Registration: 43
Remote code: 54
Remote operation: 52
Ring count: 54
Ringer ID: 27
Ringer off
Base unit: 42
Handset: 18, 38
Ringer tone
Base unit: 42
Handset: 38
Ringer volume
Base unit: 42
Handset: 38
Rotary service, tone dialing: 21
S
T
Safety instructions: 6
Soft keys: 15
SP-phone: 17
Talking Caller ID
Base unit: 26, 43
Handset: 26, 39
Technical information: 70
Time adjustment: 44
Toll saver: 54
Transferring a call: 34
Troubleshooting
Answering system: 64
Battery charge: 65
Caller ID: 63
General use: 61
Making/answering calls, Intercom:
62
Phonebook: 62
Power failure: 65
Programmable settings: 61
TTY: 5
V
VE (voice enhancer): 19
Voice enhancer: 19, 39
Voice guidance: 50, 52
Volume control
Base unit: 49
Handset receiver: 17
Handset speaker: 17
For assistance, please call 1-800-211-PANA (7262).
75
Download from Www.Somanuals.com. All Manuals Search And Download.
If you need assistance with setup or operation;
3 Call us at: 1-800-211-PANA (7262)
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
When you ship the product;
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom, to the outside of the carton.
L Send the unit to Panasonic Services Company Customer Servicenter, prepaid and
adequately insured.
L Do not send your unit to Panasonic Consumer Electronics Company listed below or to
executive or regional sales offices. These locations do not repair consumer products.
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be
reproduced for internal use only. All other reproduction, in whole or in part, is prohibited
without the written consent of Panasonic Communications Co., Ltd.
© 2004 Panasonic Communications Co., Ltd. All Rights Reserved.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
PQQX14355YA DM1104PN2025
Download from Www.Somanuals.com. All Manuals Search And Download.
|