Palsonic CRT Television 6850TKPF User Manual

OWNER'S MANUAL  
68CM CORDLESS REMOTE COLOUR TELEVISION  
MODEL: 6850TKPF  
Type Tested  
Electrical  
Safety  
AS/NZS 3250 Lic 4166  
Standards Australia  
APP No: N15899  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls  
Front  
Power Switch  
Indicator  
Remote Sensor  
AV/TV  
CH-  
CH+  
MENU  
MENU  
VOL-  
VOL+  
CHANNEL DOWN  
VOLUME DOWN  
CHANNEL UP  
VOLUME UP  
TV/AV  
Back  
AV2 input  
(VIDEO, AUDIO; L, R)  
DVD input  
(VIDEO; Y,Cb,Cr,  
AUDIO; L/MONO, R)  
AV output  
(VIDEO, AUDIO; L, R)  
AV1 input (VIDEO,  
AUDIO; L/MONO, R)  
Antenna input  
S-VIDEO input  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls  
Remote control  
TV/AV  
TV/VIDEO input select  
Power on/standby  
GAME  
ZOOM  
CALL  
Game playing  
3
6
9
1
4
7
0
2
5
8
Picture zoom  
Direct channel select  
Digit select  
Recall on-screen display  
MUTE  
Sound mute  
Return to previous channel  
Sleep timer  
SCAN  
Program scan  
Picture mode select  
MUSIC  
Lock setting  
Enter into music mode  
Access picture menu  
Select higher program  
Volume down  
Volume up  
Open the menu  
Select lower program  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna connection  
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be  
used. The exact type and position of the aerial will depend upon your particular area.  
TV REAR  
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which  
may occur due to radio wave conditions.  
The aerial cable should not be bundled with the power cord and the like.  
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on  
the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable  
viewing.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External equipment connections  
The following describes how to use and connect the TV with other AV equipment (for example, VTR, Video  
Camera, DVD, Video game, etc.) Please refer to the owner's manual of the equipment to be connected as  
well.  
To connect AV input terminals  
Connect side AV inputs  
Y
W
R
Yellow (video)  
TV SET SIDE  
To access the unit connected  
to these jacks, press TV/AV  
button until AV2 appears on  
the screen.  
Y
White (audio L/MONO)  
Red (audio R)  
W
R
Video game  
W
R
Y
Signal  
To video  
outputs  
To audio  
outputs  
Connect rear AV inputs  
If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal on the  
unit. If not, connect it to the VIDEO terminal (RCA ).  
The S-VIDEO and AV1 use the same group of audio input terminals.  
VTR without  
VTR without  
S-VIDEO terminal  
S-VIDEO terminal  
Y
: Yellow (video)  
W
: White (audio L/MONO)  
R : Red (audio R)  
W
R
Y
W
R To audio  
outputs  
To S-VIDEO  
output terminal  
To audio  
outputs  
To video  
output  
TV SET REAR  
Y
W
R
W
R
To access the unit connected to these jacks, press TV/AV button until AV1 or SVHS appears on the screen.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
External equipment connections  
To connect DVD input terminals  
The figure below shows how to connect the DVD input terminals of the TV set to the DVD Player, Laser Disk  
Player, etc.  
The TV set rear  
DVD Player,  
Laser Disk Player etc.  
:Direction of the signal  
W
:White (audio L/MONO)  
R
:Red (audio R, CR)  
:Green (Y)  
G
B :Blue (CB)  
CB  
Y
CR  
R
L
Signals  
To access the unit connected to these jacks, press TV/AV button until YUV appears on the screen.  
Notes:  
1. Both the CR terminal and the audio R terminal are red for easy identification. Make sure they are  
correctly connected.  
2. DVD and AV1 use the same group of audio input terminals.  
To connect the AV Outputs  
You can connect an audio system to the AV output jacks on the TV set rear to enjoy a high-quality sound  
from the audio system, or you can connect the AV output jacks to the VTR to record the program you like.  
The TV set rear  
To external input  
Signal  
Audio System  
Yellow (video)  
white (audio L)  
red (audio R)  
Y
W
R
Another VTR for  
recording  
To video input  
To audio inputs  
Y
W
R
Y
W
R
Signal  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power on/off  
Turning on  
Press the Power Switch on the TV set.  
1
2
TV/AV  
GAME  
If no picture appears on the screen and the standby  
indicator lights up, the TV set is in STANDBY mode.  
Now please follow step 2.  
3
6
9
1
4
7
0
2
5
8
ZOOM  
CALL  
In STANDBY mode, press standby (  
on the remote controller and the TV set is turned  
on.  
) button  
MUTE  
In STANDBY mode, you can also press Channel up/down  
button on the set to turn on the set.  
SCAN  
MUSIC  
Turning off  
Press the Power Switch on the TV set if you  
want to cut off the power completely.  
1
2
If you want to turn off the TV set temporarily,  
press the  
button.  
Special indication:  
Auto-Power-Off function: there are three kinds of Auto-  
Power-Off function:  
1. If a vacant channel is tuned or TV broadcast for a day is  
finished, the TV will automatically turn off after a period  
of time.  
2. Sleep-timer function  
3. OFF timer function.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting input signal  
Watching AV program  
This TV set provides AV input terminals for your  
convenient connection to VCR, DVD or other video  
equipment.  
TV/AV  
GAME  
TV/AV  
To watch video program from AV inputs, press  
TV/AV button repeatedly until you see the  
appropriate input indicator on the screen.  
3
6
9
1
4
7
0
2
5
8
1
ZOOM  
CALL  
12  
AV1  
AV2  
SVHS  
YUV  
MUTE  
NOTE:  
SCAN  
AV1: Select AV1 when viewing the signals from the video  
equipment connected to the AV 1 IN terminals.  
MUSIC  
AV2: Select AV2 when viewing the signals from the video  
equipment connected to the AV 2 IN terminals.  
SVHS: Select SVHS when viewing the signals from the  
video equipment connected to the S-VIDEO IN terminals.  
YUV: Select YUV when viewing the signals from the  
video equipment connected to the YUV IN terminals.  
Switching from AV to TV  
When the TV set is in AV mode, you can do the following to  
switch back to TV mode.  
Press TV/AV button repeatedly until the TV  
program appears.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning in  
There are two ways to preset channels: to preset channels automatically and to preset channels manually.  
Below we will describe how to preset the channels by making use of the menu.  
Auto Search  
Use the Auto Search function to preset all the active channels in  
TV/AV  
your local area automatically.  
GAME  
Press MENU repeatedly to  
3
6
9
1
4
7
0
2
5
8
1 display Preset menu.  
ZOOM  
CALL  
Preset  
Note: if LOCK is set to ON in LOCK  
menu, the Preset menu can not be  
entered. How to setup or change  
lock, please refer to page 22 for  
details.  
PROGRAM  
AUTO STORE  
SEARCH  
1
CALL  
FINE TUNING  
PROG EDIT  
SKIP  
MUTE  
ON  
Press P+ or P- to select AUTO  
2
STORE. Press V+ to enter into the  
sub-menu.  
SCAN  
Preset  
* AUTO STORE *  
PROGRAM  
COLOR SYSTEM AUTO  
SOUND SYSTEM  
START  
Press P+ or P- to select PROGRAM.  
3
MUSIC  
1
Press V+ or V- to select an initial  
B/G  
channel number from which you  
want to store (for example, program  
1).  
Press P- to select COLOR SYSTEM  
4 menu item, press V+ or V- to select  
Menu  
control buttons  
a proper colour system (normally  
please select AUTO).  
AUTO STORE  
PROGRAM  
VHF-L  
13  
49  
Press P- to select SOUND SYSTEM  
5
menu item, press V+ or V- to select  
your local area's sound system.  
Press P- to select START menu  
6 item, press V+ to start auto search.  
All active channels will be preset and stored into the  
memory automatically.  
After auto search, the set will return to the initial channel.  
During the process of Auto Search, pressing MENU  
will stop the process.  
Note:  
* To exit the menu, press CALL button or  
Since this model's colour system and sound  
system have been preset properly in factory,  
therefore there is no need to set the colour/sound  
system before auto search, the above steps 4  
and 5 may be skipped.  
repeatedly press MENU button.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning in  
If Auto Search can not preset the desired channels, or you want to preset the desired channels one by  
one with the preferred channel numbers, please make use of SEARCH.  
Manual Search  
TV/AV  
Preset  
PROGRAM  
AUTO STORE  
SEARCH  
Press MENU repeatedly to display  
1 Preset menu.  
4
GAME  
3
6
9
1
4
7
0
2
5
8
FINE TUNING  
PROG EDIT  
SKIP  
Press P+ or P- to select SEARCH,  
ZOOM  
CALL  
2 press V+ to enter into the sub-menu.  
ON  
CALL  
In SEARCH sub-menu, press P+ or  
3 P- to select PROGRAM. Press V+  
Preset  
MUTE  
* SEARCH *  
PROGRAM  
COLOR SYSTEM AUTO  
SOUND SYSTEM  
BAND  
or V- to select a channel number  
at which you want to store (for  
example, program 6).  
6
B/G  
VHF-L  
SEARCH  
SCAN  
In SEARCH sub-menu, press P- to  
4 select SEARCH menu item, press  
MUSIC  
V+ or V- to perform searching.  
Press and hold V- to search  
towards lower frequency.  
Press and hold V+ to search  
towards higher frequency.  
SEARCH  
PROGRAM  
VHF-L  
6
36  
Menu  
control buttons  
When a channel is located, the searching stops, this  
channel is then memorised with the preset program  
number.  
If the searched channel is abnormal  
Preset  
5 in colour, maybe the colour system  
* SEARCH *  
PROGRAM  
COLOR SYSTEM AUTO  
SOUND SYSTEM  
BAND  
setting is wrong, you may try to  
6
change the colour system. In  
SEARCH sub-menu, press P- to  
select COLOR SYSTEM menu  
item, press V+ or V- to select a  
proper colour system.  
B/G  
VHF-L  
SEARCH  
If the searched channel is abnormal  
6 in sound, maybe the sound system  
Preset  
* SEARCH *  
PROGRAM  
COLOR SYSTEM AUTO  
SOUND SYSTEM  
BAND  
SEARCH  
setting is wrong you may try to  
change the sound system. In  
SEARCH sub-menu press P- to  
select SOUND SYSTEM menu  
item, press V+ or V- to select a  
proper sound system.  
6
B/G  
VHF-L  
* To exit the menu, press CALL button or  
repeatedly press MENU button.  
Notes:  
1. In manual search, you can also use Band selection to quicken searching process if you know which band  
your desired program locates in. The band switches among VHF-L, VHF-H and UHF.  
2. Repeat the above steps if you want to store another program in other program number.  
3. In some model there is only with one sound system, in this case there is no need to set sound system.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning in  
To skip unnecessary channel  
After presetting the channels, you can skip unnecessary  
channels so that only the channels you want to watch are  
selected with Program up/down buttons.  
TV/AV  
GAME  
Select the unwanted channel with digit buttons.  
1
Direct channel  
select buttons  
3
6
9
1
4
7
0
2
5
8
Preset  
PROGRAM  
AUTO STORE  
SEARCH  
Or enter into Preset menu, press  
P- or P+ to select PROGRAM,  
press V- or V+ to select the  
unwanted channel.  
ZOOM  
CALL  
4
FINE TUNING  
CALL  
PROG EDIT  
SKIP  
ON  
MUTE  
Press P- or P+ to select SKIP,  
press V- or V+ to select SKIP ON.  
2
Thus, after exiting the menu, the channel will then be skipped  
when you select programs with the Program up/down button.  
SCAN  
MUSIC  
If you want to skip other unwanted channels, repeat the  
above steps.  
Note: you can select the skipped channel by pressing the  
direct channel select buttons.  
To restore a skipped channel  
Menu  
control buttons  
Enter into Preset menu, select the program number you want  
to restore. Press P- or P+ to select SKIP, press V- or V+ to  
select SKIP OFF.  
Manual Fine Tuning  
Fine tuning is not necessary under normal conditions. However,  
in area of inferior broadcast conditions where adjustment is  
necessary for a better picture and sound, use Fine tuning.  
Select the channel you want to fine-tune.  
1
Preset  
PROGRAM  
AUTO STORE  
SEARCH  
FINE TUNING  
PROG EDIT  
SKIP  
1
Enter into Preset menu, press P-  
2 or P+ to select FlNE TUNING,  
then press V+ to enter into the  
sub-menu.  
ON  
* To exit the menu, press CALL button or  
repeatedly press MENU button.  
In FlNE TUNING sub-menu,  
Preset  
3 press P- or P+ to select TUNING,  
* FINE TUNING *  
PROGRAM  
then press and hold V+ or V- to  
fine tune to obtain best possible  
picture and sound.  
2
COLOR SYSTEM AUTO  
SOUND SYSTEM  
TUNING  
B/G  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel selection  
You can select your desired TV program by one of the  
following methods.  
Use Direct Channel Select buttons  
TV/AV  
GAME  
To select one-digit channel:  
Press 0-9 button directly.  
Direct channel  
select buttons  
3
6
9
1
4
7
0
2
5
8
Press 0-9  
ZOOM  
CALL  
button  
5
CALL  
MUTE  
To select two-digit channel:  
Press -/-- button to display "--" then input the number.  
Press  
0-9 buttons  
Press  
"-/--" buttons  
Press  
0-9 buttons  
SCAN  
- -  
5-  
56  
MUSIC  
To select three-digit channel:  
Press -/-- button to display "1--", then input the number.  
P+  
P-  
1--  
15-  
156  
Press  
0-9 button  
Press  
-/-- button  
Press  
0-9 button  
* In this model the maximum channel number is 199.  
Use Program up/down buttons  
Press P+ button, the channel number increases;  
Press P- button, the channel number decreases.  
Use Previous program button  
Press  
button to switch between the current program  
and the previous one.  
Notes:  
Use CALL button to know the current channel  
number.  
Press CALL button to display the  
current TV state. If in TV program  
viewing, then it will display the  
current channel number, colour  
12  
AUTO  
B/G  
system, sound system and audio  
60  
mode. If you have set sleep timer,  
the remaining time will also be  
displayed.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel edit  
You can edit the channel programs in your favourite order.  
Channel edit  
Preset  
PROGRAM  
AUTO STORE  
SEARCH  
Press MENU repeatedly to  
1 display Preset menu.  
4
TV/AV  
GAME  
FINE TUNING  
PROG EDIT  
SKIP  
Press P+ or P- to select PROG  
3
6
9
1
4
7
0
2
5
8
2 EDIT.  
ON  
ZOOM  
CALL  
Press V+ to enter into EDIT  
PROG sub-menu.  
3
CALL  
Preset  
MUTE  
* EDIT PROG *  
PROGRAM  
TO  
4
10  
Select PROGRAM item.  
Press V+ or V- to select a program  
number which you want to swap.  
4
SWAP  
SCAN  
MUSIC  
Select TO item, press V+ or V- to select a program  
5 number which you want to swap to.  
Highlight SWAP and press V+ to confirm.  
6 Now these two programs' contents are swapped.  
Menu  
control buttons  
Repeat the above steps to edit the programs in your  
favourite order.  
* To exit the menu, press CALL button or  
repeatedly press MENU button.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture adjustment  
To select the picture mode  
You can select the picture quality  
instantly among three preset  
modes and one user-set mode.  
MILD  
DYNAMIC  
STANDARD  
USER  
TV/AV  
GAME  
3
6
9
1
4
7
0
2
5
8
Press  
button to select the  
ZOOM  
CALL  
desired picture quality. MILD,  
DYNAMIC, STANDARD and  
USER (user-set) can be selected  
cyclically.  
CALL  
MUTE  
Mode  
MILD  
Picture quality  
Display soft pictures  
Display dynamic pictures  
Display normal pictures  
The picture quality you set  
DYNAMIC  
STANDARD  
USER  
SCAN  
MUSIC  
Picture adjustment  
Press MENU button to display  
Picture  
1the Picture menu.  
BRIGHT  
CONTRAST  
COLOR  
14  
25  
50  
41  
0
Menu  
control buttons  
SHARPNESS  
TINT  
Press P+ or P- to select item.  
2
WHITE TONE NORMAL  
Press V+ or V- to adjust the level.  
3
You can also press  
button to call up the Picture menu.  
Item  
BRIGHT  
CONTRAST  
COLOR  
SHARPNESS  
*TINT  
V-  
V+  
lighter  
stronger  
deeper  
sharper  
greenish  
darker  
weaker  
paler  
softer  
purplish  
WHITE TONE  
NORMAL/COOL/WARM  
Notes:  
* To exit the menu, press CALL button or  
repeatedly press MENU button.  
Tint is only for NTSC system.  
The adjustment level is stored in the USER position.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound controls  
Adjusting volume  
Use Volume up/down button  
1
Press V- button, the volume  
decreases;  
TV/AV  
GAME  
Press V+ button, the volume  
increases.  
VOLUME  
MUTE  
52  
3
6
9
1
4
7
0
2
5
8
ZOOM  
CALL  
Use MUTE button  
2
If you want to mute the sound,  
press MUTE button on the  
MUTE  
remote.  
MUTE  
To resume the sound, press this button again.  
SCAN  
MUSIC  
Making use of Sound menu  
Press MENU repeatedly to display Sound menu.  
1
V-  
Sound  
Press P+ or P- to select  
VOLUME  
40  
ON  
2 desired adjusting item.  
V+  
AVL  
Menu  
control buttons  
Press V+/- to adjust the  
3 level.  
V-  
weaker  
V+  
stronger  
Item  
Volume  
*AVL  
ON/OFF  
* AVL: auto volume limit.  
Each broadcasting station has its own signal conditions,  
which can make it necessary to adjust the volume every time  
the channel is changed. Turning "AVL" On lets' you  
automatically adjust the volume of the desired channel  
by lowering the sound output when the modulation signal is  
high or by raising the sound output when the modulation  
signal is low.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer setting  
Setting clock time  
Making use of this function can set the current time for the TV.  
Time  
TV/AV  
GAME  
Press MENU repeatedly to  
display the Time menu.  
CLOCK  
12:00  
- -:- -  
- -:- -  
0
1
OFF TIME  
ON TIME  
PROGRAM  
3
6
9
1
4
7
0
2
5
8
Press P- or P+ to select CLOCK.  
ZOOM  
CALL  
2
3
Press V- to set the hour (0-23), press V+ to set the minute  
CALL  
(00-59).  
MUTE  
Note:  
Before setting the OFF timer and ON timer, please set the  
CLOCK item first.  
SCAN  
MUSIC  
Setting OFF timer  
With the OFF timer, the TV will automatically switch to standby  
mode at a preset time.  
In Time menu, press P- or P+ to  
select OFF TIME.  
Time  
1
CLOCK  
12:05  
13:50  
- -:- -  
0
OFF TIME  
ON TIME  
PROGRAM  
Menu  
control buttons  
Press V- to set the hour (0-23),  
press V+ to set the minute (00-  
59).  
2
Once the preset time has elapsed, the TV will automatically  
go into standby mode.  
* To exit the menu, press CALL button or  
repeatedly press MENU button.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer setting  
Setting ON timer/ON program  
With the ON timer, the TV will automatically turn on to a preset  
channel at a preset time.  
Time  
In Time menu, press P- or P+ to  
CLOCK  
12:09  
13:50  
18:10  
4
TV/AV  
GAME  
1select ON TIME.  
OFF TIME  
ON TIME  
PROGRAM  
Press V- to set the hour (0-23),  
press V+ to set the minute (00-  
59).  
3
6
9
1
4
7
0
2
5
8
ZOOM  
CALL  
Time  
CLOCK  
12:09  
13:50  
18:10  
4
CALL  
Press P- to select PROGRAM.  
2 Press V- or V+ to set the TV ON  
OFF TIME  
ON TIME  
PROGRAM  
MUTE  
program number.  
button to switch the TV to standby mode.  
3 Press  
SCAN  
At the preset time, the TV will turn on automatically to the  
preset channel.  
MUSIC  
Setting sleep timer  
Menu  
control buttons  
Making use of the Sleep timer function allows you to have the  
set automatically turn off after a preset time, and bring the TV  
to standby mode.  
With every press of  
sequence of 0 15  
150 120 135  
225 240  
button the sleep time changes in the  
30  
150  
45  
165  
60  
180  
75  
195  
90  
210  
0 (minutes) ----.  
For example, if you would like the TV  
to auto turn off in 60 minutes, you can  
press  
button repeatedly until the  
screen displays the desired amount of  
time. If you want to cancel the sleep  
60  
timer, you can press  
button  
repeatedly until 0 displays on the  
screen.  
* To exit the menu, press CALL button or  
repeatedly press MENU button.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System setup  
Setting Blue Screen  
Press MENU repeatedly to  
Setup  
1 display Setup menu.  
BLUE SCREEN  
PICTURE ENHANCE ON  
CALENDAR  
ON  
TV/AV  
GAME  
Press P- or P+ to select BLUE  
3
6
9
2 SCREEN.  
1
4
7
0
2
5
8
ZOOM  
CALL  
Press V+ or V- to turn on/off BLUE SCREEN.  
3
CALL  
If the BLUE SCREEN is turned on, the TV will appear a  
blue screen when there is no input signal.  
MUTE  
SCAN  
Setting Picture Enhance  
MUSIC  
Setup  
Enter into Setup menu.  
1
BLUE SCREEN  
ON  
PICTURE ENHANCE ON  
CALENDAR  
Press P- or P+ to select  
2 PICTURE ENHANCE.  
Press V+ or V- to turn on/off  
3 Picture Enhance.  
Menu  
control buttons  
Turning on PICTURE ENHANCE can improve the picture  
quality.  
Calendar function  
Setup  
Enter into Setup menu.  
BLUE SCREEN  
ON  
1
PICTURE ENHANCE ON  
CALENDAR  
Press P- or P+ to select  
2 CALENDAR.  
Press V+ to enter into the  
3 calendar interface.  
2004 FEB  
* To exit the menu, press CALL button or  
repeatedly press MENU button.  
SU MO TU WE TH FR SA  
Pressing P+ or P- can check  
4 years' calendar forward or  
5
7
6
3
4
1
8
2
9
12  
19  
26  
14  
21  
28  
13  
20  
27  
10 11  
17 18  
24 25  
15 16  
22 23  
29  
backward.  
Pressing V+ or V- can check  
months' calendar of some year  
forward or backward.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lock setting  
The Child Lock function blocks the viewing of any channel for  
which the child lock has been set.  
To use the Child Lock function, you first need to set your  
password.  
TV/AV  
GAME  
3
6
9
1
4
7
0
2
5
8
To set a password  
ZOOM  
CALL  
To enter into LOCK menu, press  
button. Now a password is  
required to input.  
Digit buttons  
1
LOCK  
PIN *** -  
MUTE  
Press digit buttons to input the  
2 password (four-digit, the default  
LOCK  
LOCK  
PROGRAM  
CHILD LOCK  
HOTEL MODE  
VOLUME LIMIT  
PLUG & PLAY  
CHANGE PIN  
OFF  
10  
password is 0000 and you  
should change it) to enter into  
Lock menu.  
OFF  
OFF  
32  
SCAN  
OFF  
MUSIC  
Press P- to select CHANGE PIN  
3 item.  
Press V+ button to enter into the  
CHANGE PIN  
sub-menu.  
NEW PIN  
CONFIRM  
* * * *  
* *- -  
Enter a new password and  
4 confirm again.  
Lock menu  
control buttons  
Now the password has been  
modified successfully.  
TV program child lock setup  
Enter into LOCK menu. Highlight PROGRAM and use V+  
1or V- to select a program you want to lock.  
LOCK  
LOCK  
PROGRAM  
CHILD LOCK  
HOTEL MODE  
VOLUME LIMIT  
PLUG & PLAY  
CHANGE PIN  
Press P- or P+ button to select  
2 CHILD LOCK item.  
OFF  
10  
ON  
OFF  
32  
Press V+ or V- button to set On.  
OFF  
Repeat the above steps to set  
3 child lock to other TV program.  
LOCK  
LOCK  
PROGRAM  
CHILD LOCK  
HOTEL MODE  
VOLUME LIMIT  
PLUG & PLAY  
CHANGE PIN  
Press P+ button to select LOCK  
4 item.  
ON  
10  
ON  
OFF  
32  
The master password to enter into LOCK  
menu is 4100. Make sure not let children  
know the password.  
Press V+ or V- button to set ON.  
OFF  
Press  
button to exit the  
5 menu.  
Now the Child Lock function is activated, the locked channel's screen is blank and a locked icon appears  
on the screen.  
Important note: to enable child lock, you must both set Lock to On and Child Lock to On in Lock  
menu.  
To cancel child lock function, press  
button and then input password to enter into LOCK menu, select  
LOCK item and set it to Off (it is a general lock).  
Note: if LOCK is set to On, the PRESET menu can not be entered.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lock setting  
This unit provides Hotel Lock function, you can limit sound  
volume which is especially useful in hotel.  
Hotel lock setup  
TV/AV  
GAME  
Use password to enter into  
1 LOCK menu.  
LOCK  
LOCK  
ON  
10  
PROGRAM  
CHILD LOCK  
3
6
9
ON  
ON  
32  
1
4
7
0
2
5
8
Select LOCK item and press V+  
or V- button to set ON.  
HOTEL MODE  
2
ZOOM  
CALL  
VOLUME LIMIT  
PLUG & PLAY  
CHANGE PIN  
OFF  
Digit buttons  
Press P- button to select HOTEL  
3 MODE item.  
LOCK  
LOCK  
PROGRAM  
CHILD LOCK  
HOTEL MODE  
VOLUME LIMIT  
PLUG & PLAY  
CHANGE PIN  
MUTE  
OFF  
10  
Press V+ or V- button to set On.  
ON  
ON  
50  
Press P- button to select  
4 VOLUME LIMIT item.  
OFF  
SCAN  
Press V+ or V- button to set a  
maximum volume.  
MUSIC  
Now Hotel Lock functions, the volume is limited.  
To cancel Hotel Lock, input the correct password to enter  
into Lock menu and set LOCK to OFF.  
PLUG & PLAY function  
Lock menu  
control buttons  
When you set PLUG & PLAY to ON, next time you turn on the  
set by Power Switch, the set will automatically perform auto  
search (please make sure that the antenna connection is OK  
before you turn on). After auto search, the PLUG & PLAY will  
auto be set to OFF. Below is the steps:  
LOCK  
LOCK  
PROGRAM  
CHILD LOCK  
HOTEL MODE  
VOLUME LIMIT  
PLUG & PLAY  
CHANGE PIN  
Use password to enter into  
ON  
10  
1 LOCK menu.  
ON  
OFF  
32  
ON  
Press P- button to select PLUG  
& PLAY item.  
Press V+ or V- button to set On.  
2
Note:  
If LOCK is set to ON, PLUG & PLAY function does not  
work.  
PLUG & PLAY function is an optional function, it is only  
available on certain versions and we recommend you had  
better not use it.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other functions  
ZOOM function  
Making use of zoom function can change the screen's vertical  
size.  
TV/AV  
GAME  
Press ZOOM button repeatedly, ZOOM, 16: 9 and 4:3 can be  
selected cyclically. You can select one of them according to  
actual need, for example, to view wide screen movie VCD.  
GAME  
ZOOM  
3
6
9
1
4
7
0
2
5
8
ZOOM  
CALL  
Zoom  
16:9  
4:3  
MUTE  
To scan programs  
SCAN  
Press SCAN button, the TV set will scan the channels from  
current channel to higher channels one by one, every program  
will be displayed for about two seconds and then go on  
scanning.  
SCAN  
MUSIC  
MUSIC  
Press SCAN button again to stop.  
Music TV function  
Press MUSIC button to enter into  
MUSIC MODE. In this mode, the  
screen is blank while the sound is  
normal. You can make use of this  
function to reduce eyestrain while the  
sound still can be listened. Press  
MUSIC button again to exit the mode.  
MUSIC MODE  
Playing game  
This TV set provides a built-in game (BOXMAN) for you to play.  
Press GAME button and BOXMAN game playing interface  
will appear.  
1
In boxman mode, the box should be moved to specific  
place.  
2
Press P+ or P- to move the box upward or downward.  
Press V+ or V- to move the box rightward or leftward.  
Press [1] digit button to select previous stage of game.  
Press [2] digit button to select next stage of game.  
Press CALL button to exit.  
Press MENU button to restart.  
The player should control the man to push the box to the  
3 destinations within the wall by using P+/P-/V+/V- buttons.  
When you push all boxes to the relevant destinations then  
you win the game.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
Before calling service personnel, please check the following chart for a possible cause to the trouble you are  
experiencing.  
Symptoms  
Check the following items  
Be sure the power cord is plugged in.  
Power is not turned on.  
Poor colour poor tint.  
Contrast, colour tint are not correctly adjusted  
Possible interferences of automobiles, motorcycle,  
trolley bus, neon lamps, etc.  
Spots appear on the screen.  
Stripes appear on the screen.  
Possible interference of electronic interference  
from another TV set, a computer, an electronics  
game machine, a broadcast station, etc.  
This may be caused by reflections from nearby  
mountains or buildings.  
Check the antenna direction.  
Double images or "ghosts".  
Snowy picture.  
It is possible that the aerial "lead-in" is damaged or  
comes off.  
Check the antenna direction.  
Check sound volume levels.  
No Sound, Picture is OK.  
Make sure the TV is not muted.  
Preset menu can not be  
entered.  
When LOCK is set to ON, the Preset menu can not  
be entered. You may use password to enter into  
Lock menu to set LOCK to OFF.  
Volume is limited.  
TV cabinet creaks.  
The set is in Hotel Lock On mode. Use password  
to enter into Lock menu and set LOCK to OFF.  
Even if the picture or the sound is normal, changes  
in the room temperature sometimes make the TV  
cabinet expand or contract, making a noise. This  
does not indicate a malfunction.  
Remote controller does  
not work.  
The batteries may be worn out.  
The batteries may be installed with their polarity  
reversed.  
When the set is switched on, do not shift or move  
the set around. Sometimes it may develop an  
unevenness in colour in some parts of the screen.  
This can be eliminated by switching off the set with  
the POWER switch and wait for 30 minutes before  
switching on again.  
Unevenness in colour in  
some parts of the screen.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna.  
Outdoor antennas are recommended for best results if not using cable. The most common types of  
television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV  
system, the disturbance may be caused by the local cable company broadcast.  
IGNITION:  
Black spots or horizontal streaks may appear, picture, may flutter or drift.  
Usually caused by interference from automobile ignition systems, neon  
lamps, electric drills and other electric appliances.  
GHOSTS:  
Ghosts are caused by the television signal following two paths. One is the  
direct path and the other is reflected from tall buildings, hills or other  
objects. Changing the direction or position of the antenna may improve the  
reception.  
SNOW:  
If your receiver is located in the fringe area of a television station where the  
signal is weak, your picture may be marred by the appearance of small dots.  
When the signal is extremely weak, it maybe necessary to install an  
external antenna to improve the picture.  
RADIO FREQUENCY INTERFERENCE:  
This interference produces moving ripples or diagonal streaks, and in some  
cases, causes loss of contrast in the picture.  
PICTURE SIZE VARIATION:  
A slight picture size variation is quite normal when you adjust the  
CONTRAST or BRIGHTNESS setting.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the  
receiver may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping  
the plastic parts. Mild soap and a soft, damp cloth may be used.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power Supply:  
Power Consumption:  
Dimensions (mm):  
Weight (kg):  
AC 240V, 50Hz  
150W (Max.)  
762 (W) x 580 (H) x 520 (D)  
47  
CRT:  
68cm  
TV system & channel range  
CATV  
VHF  
2-12  
UHF  
System  
X~Z+2, S1~S41  
21-69  
PAL-B/G  
Colour System:  
Sound output:  
Accessories:  
PAL-BG, NTSC (AV)  
4W + 4W  
Remote control x 1  
Note: Design and specifications are subject to change without notice.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
604-TK29663-00  
Ver. 1.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Clothes Dryer t8007 User Manual
MTD Trimmer LT31S User Manual
NEC Computer Monitor MD212MC User Manual
Nortel Networks SONAR T24 User Manual
NotaTech Switch 8000SeriesI O User Manual
Omega Weather Radio WMS 16 User Manual
Omron Healthcare Blood Pressure Monitor HEM 739 User Manual
Optimus Stereo Receiver STAV3680 User Manual
OWI Portable Speaker TRP70B User Manual
Panasonic CRT Television CT 32E14 CT G2134 CT G2174 CT G2174L CT G2974 CT G2974L CT G3354 User Manual