Oster Blender BLSTET B User Manual

User Manual IC E SH A V I N G BL E N D E R  
MODELS  
BLSTET-B, BLSTET-C SERIES  
For product questions contact:  
Sunbeam Consumer Service  
USA : 1.800.334.0759  
© 2010 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions.  
All rights reserved. Distributed by Sunbeam Products, Inc. doing business as  
Jarden Consumer Solutions, Boca Raton, Florida 33431.  
Para preguntas sobre los productos llame:  
Jarden Consumer Service  
EE.UU.: 1.800.334.0759  
Canadá: 1.800.667.8623  
©2010 Sunbeam Products, Inc. operando bajo el nombre de Jarden Consumer Solutions.  
Todos los derechos reservados.  
Distribuido por Sunbeam Products, Inc. operando bajo el nombre  
de Jarden Consumer Solutions, Boca Raton, Florida 33431.  
Printed in U.S.A.  
SPR092010  
P.N. 142666  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fe a t u r e s o F Yo u r IC e sh a v I n g Bl e n d e r  
we l C o m e  
A. Ice Reservoir Lid – Covers the Ice Reservoir.  
Congratulations on your purchase of the OSTER® Ice Shaving Blender! To  
learn more about OSTER® products, please visit us at www.oster.com.  
B. Ice Reservoir – Holds the ice for making frozen drinks.  
C. Shaving Paddle – Moves ice across the Shaving Blade.  
D. Inner Ice Bowl  
E. Ice Shaver Main Body  
F. Shaving Blade Assembly Clip – Holds Shaving Blade in place.  
G. Ice Shaving Blade – Shaves ice.  
A
B
H. Ice Chute – Directs ice from Ice Bowl into Blending Jar.  
I. Ice Melt Reservoir – Catches water from melted ice.  
J. Motor Base – Holds Blending Jar and Ice Shaver assembly securely in place.  
K. Control Panel – Contains all necessary controls to operate your unit.  
L. Jar Lid – Seals the blending jar.  
M. Blending Jar – Maximum capacity of 40 oz.  
N. Blending Blade Sealing Ring – Seals the Blending Jar and Jar Base.  
O. Blending Blade  
F
C
D
These items come  
pre-assembled  
P. Jar Base  
G
I
H
Ice  
L
Shaver  
Assembly  
M
E
Blender  
Assembly  
N
O
J
Motor  
Assembly  
K
P
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Plug the unit into a standard 120 Volt wall socket.  
Control Panel  
1. ON/OFF Button – Press this button to turn the  
unit “On” or “Off”.  
For best results, use store-bought ice that has been out  
of the freezer between 20-30 minutes.  
2. Power Indicator Light – Turns on and blinks  
rapidly indicating unit has power.  
5. Fill the Ice Reservoir with ice cubes.  
3. Auto Shave/Auto Blend – Activates auto  
1
2
6. Replace the Ice Reservoir Lid and rotate counterclockwise to the  
locked position.  
shaving and blending cycles.  
4. Status Indicator Lights  
7. Remove Blending Jar Lid.  
• Blue Lights – Pulse slowly to indicate which  
button to press during auto cycle OR remain  
illuminated during auto cycle.  
3
8. Add appropriate amount of liquid ingredients to the Blending Jar.  
4
5
6
9. Replace Blending Jar Lid and position Blending Jar under the Ice Chute  
by aligning the chute with the Blending Jar Lid.  
• Red Lights – shows product safety interlocks  
are not engaged.  
10. Push the ON/OFF button to turn the unit on. Power Indicator Light will  
blink slowly until the ice shaver or blender is placed on Motor Base.  
5. Pulse Button  
6. Stop Button  
7
8
9
7. Low Button – Blender low speed  
8. Med Button – Blender medium speed  
9. High Button – Blender high speed  
th e Be s t ma r g a r I t a re C I P e (ma k e s 3-4 dr I n k s )  
Ingredients  
Tequila  
fl oz  
4
ml  
120  
90  
Triple Sec  
3
Lime Juice  
Margarita Mix  
1-2 squirts  
ma k I n g Fr o z e n dr I n k s  
NOTE: NEVER PUT ANYTHING BUT ICE IN THE ICE RESERVOIR.  
7
210  
1. Place the motor base on a clean dry flat surface with control panel  
facing you.  
st r a w B e r r Y da I q u I r I re C I P e (ma k e s 3-4 dr I n k s )  
2. With handle on the LEFT, place the Ice Shaver Main Body on top of  
Motor Base and lock into position  
Ingredients  
Light Rum  
fl oz  
4
ml  
120  
240  
45  
by turning counter-clockwise (use  
aligning arrows).  
Cranberry Juice  
Sugar  
8
3 Tbsp  
1.5 cups  
3. Install the Ice Reservoir to Ice Shaver  
Main Body by first removing the Ice  
Reservoir Lid (turning it clockwise to  
the Unlock position). Then place the  
Ice Reservoir on top of the unit and  
lock into position by turning counter-  
clockwise (use aligning arrows)  
Frozen Strawberries - sliced  
360  
NOTE: In order to properly install the  
Ice Reservoir to the unit, make sure to first  
remove the Ice Reservoir Lid from the  
Ice Reservoir.  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automatic Frozen Drink Making  
Customizing Your Drink  
1. If you want to use the automatic frozen drink  
cycle, start by pushing the “Auto Shave/Auto  
Blend” button.  
To make a thicker drink:  
NOTE: Use LESS liquid when adding ingredients to  
blending jar.  
2. The unit will shave ice for the appropriate time.  
The unit will stop at the completion of the cycle.  
1. Press and hold the “Pulse” button to add more  
ice to the blending jar.  
3. When ice shaving is complete, the lights under  
Auto Blend will flash slowly.  
2. To stop adding shaved ice, release the “Pulse”  
button.  
4. Remove ice shaver assembly from Motor Base.  
5. Place Blending Jar assembly on Motor Base.  
3. To blend the added shaved ice, remove the Ice  
Shaver assembly from the Motor Base and place  
the Blender assembly on the Motor Base.  
6. Restart frozen drink cycle by pushing the “Auto  
Shave/Auto Blend” button again.  
4. Hold the “Pulse” button until the desired consistency is achieved.  
NOTE: To customize your drink, after either the auto shave or auto blend  
cycle, you can pulse manually. Add more shaved ice or blend longer by  
pushing the “Pulse” button. (See page 9)  
To make a thinner drink:  
NOTE: Use MORE liquid when adding ingredients to blending jar.  
1. If you have already made your drink using the Auto mode, make sure  
your drink is blended to the desired consistency.  
7. Status Indicator Lights will be illuminated during auto cycle.  
8. To serve:  
2. Add more liquid ingredients to the Blending Jar assembly.  
A. Turn the unit off.  
3. Press and hold the “Pulse” button until the desired consistency is  
achieved (you may also use the Low, Med, or High buttons to blend your  
drink).  
B. Open Lid Cap (make sure Blender Jar Lid is secure).  
C. Lift and remove Blending Jar.  
D. Pour and serve.  
Manual Drink Making  
Fill the Blending Jar with desired contents, use less ice for thinner drink, use  
more ice for thicker drink.  
NOTE: To remove excess ice from the Ice Reservoir, remove Ice Shaver Lid  
from Ice Shaver Reservoir. Remove Ice Shaver Assembly from Motor Base.  
Tilt unit enough to allow excess ice to pour out of the unit. WARNING: DO  
NOT PLACE FINGERS IN THE ICE HOPPER. THE SHAVING BLADE IS  
SHARP AND COULD CAUSE INJURY.  
1. With Ice Shaver assembly on Motor Base, position Blending Jar under Ice  
Chute.  
2. Press and hold the “Pulse” button until the desired amount of shaved ice  
is added to the Blending Jar.  
10. Periodically check the Ice Melt Reservoir and  
empty as needed.  
3. Remove Ice Shaver assembly from Motor Base.  
4. Place Blending Jar assembly on Motor Base.  
5. To start blending, press “Low”, “Med”, or “High”.  
6. To stop blending, press the “Stop” button.  
Blending Operation  
1. Place Blending Jar assembly on Motor base.  
2. To start blending, press “Low”, “Med”, or  
“High”.  
3. To stop blending, press the “Stop” button.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-Year Limited Warranty  
Cl e a n I n g a n d ma I n t e n a n C e  
IMPORTANT: Your Blending Jar, Shaving and Blending Blades are subject  
to wear during normal use. Always inspect for nicks, chips, or cracks.  
Always inspect for broken, cracked, or loose blades. If the Jar or Shaving  
and/or Blending Blades are damaged, do not use.  
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam  
Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively  
“JCS”) warrants that for a period of one year from the date of purchase, this product will be  
free from defects in material and workmanship. JCS, at its option, will repair or replace this  
product or any component of the product found to be defective during the warranty period.  
Replacement will be made with a new or remanufactured product or component. If the product  
is no longer available, replacement may be made with a similar product of equal or greater  
value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or  
mechanical functions on this product. Doing so will void this warranty.  
1. Make sure unit is unplugged. Place on a clean dry surface. Turn the  
unit so the back is facing you. Remove the Ice Reservoir Lid by turning  
clockwise to the unlock position.  
This warranty is valid for the original retail purchaser from the date of initial retail purchase  
and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain  
warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not  
have the right to alter, modify or any way change the terms and conditions of this warranty.  
This warranty does not cover normal wear of parts or damage resulting from any of the  
following: negligent use or misuse of the product, use on improper voltage or current, use  
contrary to the operating instructions, disassembly, repair or alteration by anyone other than  
JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God,  
such as fire, flood, hurricanes and tornadoes.  
2. To remove the Ice Reservoir, grasp the Reservoir Handle with your hand,  
turn clockwise, and lift to remove.  
Note the location of the Shaving Blade inside the Ice Hopper.  
WARNING: Do not place fingers inside the Ice Hopper near the Shaving  
Blade. Blade is sharp – handle carefully.  
NOTE: To reassemble, install Ice Reservoir to the unit first, then attach Ice  
Reservoir Lid.  
What are the limits on Sunbeam’s Liability?  
JCS shall not be liable for any incidental or consequential damages caused by the breach of any  
express, implied or statutory warranty or condition.  
3. Rinse the Shaving Paddle assembly with water and dry thoroughly before  
storing.  
4. Turn the Blending Jar upside down and unscrew the Jar Base. Carefully  
remove the Blending Blade and Blending Blade Sealing Ring.  
Except to the extent prohibited by applicable law, any implied warranty or condition of  
merchantability or fitness for a particular purpose is limited in duration to the duration of the  
above warranty.  
JCS disclaims all other warranties, conditions or representations, express, implied, statutory or  
otherwise.  
JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of,  
or inability to use the product including incidental, special, consequential or similar damages or  
loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought  
against purchaser by any other party.  
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental  
or consequential damages or limitations on how long an implied warranty lasts, so the above  
limitations or exclusion may not apply to you.  
WARNING: The Blending Blade is sharp. Handle with care.  
5. To remove the Ice Melt Reservoir, hold the unit still and pull straight out  
on the handle.  
6. Blending Jar Lid, Blending Jar, Blending Blade, Blending Blade Sealing  
Ring, Jar Base and Ice Melt Reservoir can be safely washed in the top  
rack of your dishwasher. Use only top rack. Failure to do so will result in  
damage. The Ice Reservoir Lid, Ice Reservoir, Shaving Paddle, Ice Bowl,  
Ice Deflector Blade Assembly, Shaving Blade and Ice Melt Reservoir are  
only exposed to ice and water and they should be rinsed with soap and  
warm water and allowed to air dry.  
This warranty gives you specific legal rights, and you may also have other rights that vary from  
province to province, state to state or jurisdiction to jurisdiction.  
7. Use a damp cloth to clean the outside of the unit.  
How To Obtain Warranty Service  
In the U.S.A.  
If you have any question regarding this warranty or would like to obtain warranty service, please  
call 1 800-334-0759 and a convenient service center address will be provided to you.  
WARNING: Unplug unit before cleaning. Do not use solvents. Never  
immerse the unit in water.  
In Canada  
If you have any question regarding this warranty or would like to obtain warranty service, please  
call 1 800-667-8623 and a convenient service center address will be provided to you.  
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden  
Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by  
Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at  
20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in  
connection with this product, please write our Consumer Service Department.  
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF  
THESE ADDRESSES OR TO THE PLACE OF PURCHASE.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Door 49 54 0101 User Manual
MTD Trimmer 316745400 User Manual
NEC Computer Monitor LCD1525S User Manual
NEC Projector MT830 User Manual
NeoDigitscom DVD Player X3000 HD User Manual
NETGEAR Router UTM10EW 100NAS User Manual
Nikon Camera Lens 2161 User Manual
Omega Speaker Systems All in One Printer DRX ACC User Manual
Optoma Technology Projector H55 User Manual
Optoma Technology Projector TH1020 User Manual