Oregon Scientific Weather Radio BAR609HGA User Manual

Deluxe Weather Forecaster with  
Wireless UV Sensor  
Model: BAR609HGA  
USER MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deluxe Weather Forecaster with  
Wireless UV Sensor  
Set Clock ................................................................ 10  
Switch Clock Display .............................................. 10  
Alarm ........................................................................ 10  
View Alarm Settings ................................................ 11  
Set Alarm ................................................................ 11  
Activate Alarm ......................................................... 11  
Silence Alarm .......................................................... 11  
Barometer................................................................. 11  
Barometric Trend .................................................... 11  
Set Unit and Altitude ............................................... 11  
Weather Forecast .................................................... 12  
Temperature and Humidity ..................................... 12  
Select Temperature Unit ......................................... 12  
Select Channel Number ......................................... 12  
Minimum / Maximum Records ................................ 13  
Ice Warning............................................................. 13  
Heat Index ................................................................ 13  
UV Sensor (UVN128) ............................................... 14  
Setup Sensor .......................................................... 14  
UV Index Readings ................................................. 15  
Moon Phase ............................................................. 15  
Backlight .................................................................. 15  
Reset System ........................................................... 15  
Safety and Care ....................................................... 16  
BAR609HGA  
USER MANUAL  
CONTENTS  
Introduction................................................................ 2  
Product Overview ...................................................... 3  
Front View ................................................................ 3  
Back View ................................................................. 4  
Thermo-Hygro Sensor (THGR122NX) ..................... 5  
Front View (UVN128) ............................................... 6  
Back View (UVN128) ................................................ 6  
Getting Started........................................................... 7  
Batteries ................................................................... 7  
Access Front Button Panel ....................................... 7  
Change Settings ....................................................... 7  
Table Stand or Wall Mount........................................ 7  
Thermo-Hygro Sensor (THGR122NX) ...................... 7  
Setup Sensor ............................................................ 8  
Data Transmission .................................................... 9  
Search for Sensor ..................................................... 9  
Clock ........................................................................... 9  
Turn Atomic Clock ON / OFF .................................. 10  
1
BAR609HGAmanual-ENG  
1
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings .................................................................. 16  
Troubleshooting ...................................................... 17  
Specifications .......................................................... 17  
Main Unit Dimensions ............................................. 17  
Thermo-Hygro Sensor Dimensions ........................ 17  
UV Sensor Dimensions .......................................... 17  
Temperature ........................................................... 17  
Relative Humidity .................................................... 18  
Barometer ............................................................... 18  
Thermo-Hygro Sensor (THGR122NX) ................... 18  
Clock ....................................................................... 18  
Power ..................................................................... 18  
UV Sensor (UVN128) ............................................. 18  
About Oregon Scientific ......................................... 19  
FCC Statement ......................................................... 19  
Declaration of Conformity ....................................... 20  
INTRODUCTION  
Thank you for selecting the Oregon ScientificTM Deluxe  
Weather Forecaster with Wireless UV Sensor  
(BAR609HGA). This device bundles precise time  
keeping, UV measurement, weather forecast, barometric  
trend with altitude adjustment, and indoor and outdoor  
temperature and humidity monitoring features into a  
single tool you can use from the convenience of your  
home.  
In this box, you will find:  
• Main unit  
• Thermo-Hygro sensor (THGR122NX)  
• UV sensor (UVN128)  
Keep this manual handy as you use your new product.  
It contains practical step-by-step instructions, as well  
as technical specifications and warnings you should  
know.  
2
BAR609HGAmanual-ENG  
2
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT OVERVIEW  
FRONT VIEW  
1. SNOOZE / LIGHT button  
2. Weather Forecast & Barometric Area  
3. Indoor / Outdoor Temperature & Humidity Area  
4. UV Index (UVI) Area  
5. Moon Phase  
6
Clock / Alarm Area  
7.  
and : increase or decrease setting / activate  
or deactivate Atomic Clock  
8. RESET hole  
9. CHANNEL: switch remote sensor  
10.HEAT INDEX: switch between heat index, indoor /  
outdoor temperature and humidity displays  
11. MEMORY: view current, max and min temperature,  
humidity and UVI  
12.MODE: change clock display / settings  
13.°C / °F switch  
14.  
: display / change alarm time, enable / disable  
alarm  
15.PRESSURE: change altitude measurement unit (mb  
or inHg) and altitude compensation value  
3
BAR609HGAmanual-ENG  
3
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK VIEW  
1. Wall mount  
2. Battery compartment  
3. Table stand  
4
BAR609HGAmanual-ENG  
4
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THERMO-HYGRO SENSOR (THGR122NX)  
1. LCD display  
1. Wall mount hole  
2. RESET  
2. LED status indicator  
3. Channel number (1 - 3)  
4. Battery compartment  
(Battery compartment cover not shown)  
5
BAR609HGAmanual-ENG  
5
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK VIEW (UVN128)  
FRONT VIEW (UVN128)  
1. Sensor  
1. RESET hole  
2. LED indicator  
2. Connector for stake apparatus  
6
BAR609HGAmanual-ENG  
6
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGE SETTINGS  
GETTING STARTED  
BATTERIES  
1. Press and hold MODE for 2 seconds to enter setting  
mode.  
Batteries are not supplied with this product. You will need  
to purchase the following alkaline batteries:  
2. Press  
or  
to change settings.  
3. Press MODE to confirm.  
Main unit  
Remote sensor 2 x UM-4 / AAA 1.5V  
UV sensor 2 x UM-3 / AA 1.5V  
3 x UM-3 / AA 1.5V  
TABLE STAND OR WALL MOUNT  
Use the stand on the back of the product, or mount it on  
a wall with a nail.  
Insert batteries before first use, matching the polarity as  
shown in the battery compartment. For best results,  
install batteries in the sensors before the main unit. Press  
RESET after each battery change.  
NOTE Do not use rechargeable batteries.  
shows when batteries are low.  
UNIT  
LOCATION  
Main Unit &  
Remote Sensor  
Temperature / Humidity Area  
THERMO-HYGRO SENSOR (THGR122NX)  
This product is shipped with a THGR122NX Thermo/  
Hygro Sensor that collects Temperature and Humidity  
data. Data can be collected from up to 3 sensors.  
Additional sensors sold separately.  
UV Sensor  
UV Index Area  
ACCESS FRONT BUTTON PANEL  
The front button panel is located inside the right portion  
of the main unit. Slide it right to access the buttons.  
7
BAR609HGAmanual-ENG  
7
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For best results:  
SETUP SENSOR  
• Insert the batteries and select the channel before you  
mount the sensor.  
1. Open the sensor battery compartment with a small  
Phillips screwdriver.  
• Place the sensor out of direct sunlight and moisture.  
2. Insert the batteries, matching the polarity as shown in  
the battery compartment.  
• Do not place the sensor more than 98 feet (30 meters)  
from the main (indoor) unit.  
SWITCH  
OPTION  
• Position the sensor so that it faces the main (indoor)  
unit, minimizing obstructions such as doors, walls, and  
furniture.  
Channel  
Channel 1 - 3. If you are using  
more than one sensor, select a  
different channel for each sensor.  
• Place the sensor in a location with a clear view to the  
sky, away from metallic or electronic objects.  
3. Set the channel. The switch is located in the battery  
compartment.  
• Position the sensor close to the main unit during cold  
winter months as below-freezing temperatures may  
affect battery performance and signal transmission.  
4. Place the sensor near the main unit. Press RESET  
on the sensor. Then, press and hold MEMORY and  
CHANNEL on the main unit to initiate signal sending  
between the sensor and the main unit. The reception  
icon on the main unit will blink for approximately  
3 minutes while it is searching for the sensor. (Refer  
to the Data Transmission section for more  
information.)  
You may need to experiment with various locations to  
get the best results.  
Standard Alkaline batteries contain signifcant amounts  
of water. Because of this they will freeze in low  
temperatures of approximately 10°F. Disposable Lithium  
batteries have a much lower threshold for temperature  
with an estimated freezing range of below -40°F. The  
Liquid Crystal Display in outdoor thermometers will  
remain operational to -20°F with adequate power.  
5. Close the remote sensor battery compartment.  
6. Secure the sensor in the desired location using the  
wall mount or table stand.  
8
BAR609HGAmanual-ENG  
8
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless ranges can be impacted by a variety of factors  
such as extremely cold temperatures. Extreme cold may  
temporarily reduce the effective range between the  
sensor and the base station.  
SEARCH FOR SENSOR  
To search for a sensor, press and hold MEMORY and  
CHANNEL for 2 seconds.  
If the unit's performance fails due to low temperature,  
the unit will resume proper functioning as the  
temperature rises to within the normal temperature range  
(i.e no permanent damage will occur to the unit due to  
low temperatures).  
NOTE If the sensor is still not found, check the batteries,  
obstructions, and remote unit location.  
NOTE Signals from household devices such as  
doorbells, electronic garage doors, and home security  
systems may cause temporary reception failure. This is  
normal and does not affect general product performance.  
The reception will resume once the interference ends.  
DATA TRANSMISSION  
Data is sent from the sensor(s) every 40 seconds.  
The reception icon shown in the Temperature and  
Humidity Area shows the status.  
CLOCK  
ICON  
DESCRIPTION  
This product shows the current time, and day of week in  
English, French, German, Italian, or Spanish. The US  
Atomic Clock in Boulder, Colorado automatically updates  
this information unless you disable the feature. The  
signals are collected by the main unit when it is within  
932 miles (1500 km) of a signal.  
Main unit is searching for  
sensors.  
At least 1 channel has  
been found.  
Channel 1 is selected (number  
will change depending on the  
sensor you select)  
Initial reception takes 2 - 10 minutes, and is initiated  
when you first setup the unit, and whenever you press  
RESET. Once complete, the reception icon will stop  
blinking. The icon is shown in the Clock Area.  
The selected sensor cannot  
be found. Search for the  
sensor or check batteries.  
--- shows in Outdoor  
Temp / Humidity Area  
9
BAR609HGAmanual-ENG  
9
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SET CLOCK  
STRONG SIGNAL  
WEAK SIGNAL  
NO SIGNAL  
You only need to do this if you cannot receive the Atomic  
Clock signal, or you wish to adjust the appropriate time  
zone.  
1. Press and hold MODE for 2 seconds. The Clock Area  
will blink.  
To force a manual search forAtomic Clock signals, press  
and hold for 2 seconds. If no signal is found, check  
the batteries.  
2. Select the time zone, hour, minute, year, month, day,  
or  
and language. Press  
Press MODE to confirm.  
to change the setting.  
NOTE If the Atomic Clock signal is received and the  
hour is incorrect, use the "time zone offset" feature to  
adjust it to the appropriate time zone. Please see "Set  
Clock section" for instructions.  
NOTE The language options are (E) English, (F) French,  
(D) German, (I) Italian, and (S) Spanish.  
NOTE The time zone options are (PA) Pacific, (CE)  
Central, (MO) Mountain, and (EA) Eastern.  
TURN ATOMIC CLOCK ON / OFF  
Perform this step if you cannot receive Atomic Clock  
signals. Press and hold for 2 seconds. Then, manually  
set the clock following the Set Clock section for  
instructions.  
SWITCH CLOCK DISPLAY  
Press MODE to toggle between Clock with Seconds and  
Clock with Weekday display.  
The signal icon indicates that the Atomic Clock  
feature is ON. No icon means that it is OFF.  
ALARM  
This product is equipped with a 2-minute crescendo  
alarm.  
10  
BAR609HGAmanual-ENG  
10  
05/1/18, 7:11 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIEW ALARM SETTINGS  
BAROMETER  
Press . The alarm time and  
Clock Area.  
status will show in the  
This product tracks barometric pressure changes over  
the past 24 hours to provide the weather forecast  
and a trend line showing the direction of barometric  
change. Barometric changes are measured by the main  
(indoor) unit.  
SET ALARM  
1. Press  
to switch to alarm display.  
2. Press and hold  
settings will blink.  
again for 2 seconds. The alarm  
BAROMETRIC TREND  
3. Select the hour and minute. Press  
to confirm.  
or  
to change  
TREND  
DESCRIPTION  
settings. Press  
Rising  
ACTIVATE ALARM  
Press  
to activate or deactivate the alarm.  
Steady  
Falling  
shows in the Clock / Alarm Area when the  
alarm is activated.  
SILENCE ALARM  
When the alarm time is reached, the crescendo alarm  
will sound for 2 minutes. Press SNOOZE / LIGHT to  
silence it for 8 minutes. Or, press to turn it off until  
the next day.  
SET UNIT AND ALTITUDE  
You can set the unit of measurement (mb or inHg) and  
altitude. Doing this allows the product to take more  
accurate barometric measurements.  
If no button is pressed, the alarm will automatically  
silence after 2 minutes. It will then sound again after  
8 minutes.  
11  
BAR609HGAmanual-ENG  
11  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Press PRESSURE to select the unit of measurement:  
mb or inHg.  
SELECT TEMPERATURE UNIT  
Slide the °C / °F switch into the desired location. The  
switch is located on the front button panel. The setting  
for the main unit overrides the Thermo-Hygro sensor  
setting.  
2. Press and hold PRESSURE for 2 seconds.  
3. Select the altitude (-328 feet to 8203 feet in increments  
to change the  
of approximately 33). Press or  
setting. Press PRESSURE to confirm.  
SELECT CHANNEL NUMBER  
Press CHANNEL to switch between sensors 1-3.  
WEATHER FORECAST  
This product forecasts the next 12 to 24 hours of weather  
within a 30 to 50 mile (19 - 31 km) radius with 70 to  
75 percent accuracy. The weather forecast is always  
displayed.  
The icon shows the selected sensor.  
KINETIC-WAVE  
ICON  
PARTLY  
CLOUDY  
CLEAR  
CLOUDY  
RAINY  
Remote  
Display  
Remote  
Remote  
Display  
Display  
Channel 1 Channel 2  
Indoor  
DESIGNATED  
DISPLAY  
Display  
Channel 3  
To auto-scan between sensors, press and hold  
CHANNEL for 2 seconds. Each sensor's data will be  
displayed for 3 seconds. To end auto-scan, press  
CHANNEL or MEMORY.  
TEMPERATURE, HUMIDITY AND HEAT INDEX  
This product can display current, minimum, and maximum  
temperature, humidity percentage and heat index  
information collected by the remote sensors and main  
(indoor) unit.  
NOTE If you use a sensor that collects only temperature  
data, humidity will not be shown.  
Outdoor data is collected and displayed every 40  
seconds. Indoor data is collected and displayed every  
10 seconds.  
12  
BAR609HGAmanual-ENG  
12  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
and relative humidity. The heat index (apparent  
temperature) is how hot the heat-humidity combination  
makes you feel.  
MINIMUM / MAXIMUM RECORDS  
To view temperature, humidity or UV Index current,  
maximum (MAX) and minimum (MIN) records:  
The BAR609HGA’s heat index feature advises 4 levels  
of warning if the temperature is high.  
1. Press CHANNEL to select channel 1-3 or indoor.  
2. Press MEMORY to view the selected channel's  
records.  
WARNING  
HEAT INDEX  
MEANING  
°F  
130 or  
above  
°C  
54.5 or  
above  
Press MEMORY to toggle between current, maximum  
(MAX) and minimum (MIN) records. To clear the records,  
press and hold MEMORY for 2 seconds. A beep will  
sound to confirm that the memory has been cleared.  
E x t r e m e  
danger  
Strong possibility of  
heat stroke  
Danger  
105-129  
90-104  
40.5-53.9  
32.2-40  
Heat exhaustion likely  
E x t r e m e  
caution  
Possibility of heat  
dehydration  
ICE WARNING  
The temperature range at which water begins to freeze  
and turns to ice is approx. 37°F (3°C) to 28°F (-2°C). It  
is during this period that ice becomes most slippery,  
creating hazardous surface conditions dangerous for  
travelling.  
Caution  
80-89  
26.6-31.7  
Possibility of heat  
exhaustion  
To display the heat index, press HEAT INDEX.  
• To toggle between current / maximum / minimum  
readings, press HEAT INDEX, then press CHANNEL  
to select channel 1-3 or indoor, followed by MEMORY.  
The BAR609HGA’s Ice Warning feature gives out  
temperature readings to warn you when the temperature  
is approaching freezing. If Channel 1 sensor falls  
between 37°F to 28°F (3°C to -2°C), the freeze alert  
To toggle between temperature / humidity and heat  
index display, press and hold HEAT INDEX for 2  
seconds. Press HEAT INDEX again to stop this  
feature.  
icon  
will flash on the main unit display.  
HEAT INDEX  
NOTE If the heat index is below 80°F / 26°C, or the  
desired channel is not working, the heat index will display  
“NA”.  
Heat index is the temperature the body feels when heat  
and humidity are combined. The temperature you feel  
does not always correspond to the actual air temperature  
13  
BAR609HGAmanual-ENG  
13  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. You can place the sensor in the ground. To do this, fix  
the stake into the base of the sensor.  
UV SENSOR (UVN128)  
The UV sensor measures the UV Index. It transmits data  
to the main unit every 73 seconds and has a maximum  
transmission range of 328 feet (100 meters).  
u
v
s
e
n
s
o
r
u
v
s
e
n
s
o
r
SETUP SENSOR  
1. Insert the batteries as shown.  
Then place the stake into the ground up to the insertion  
level indicator (see point 1 below) at your desired  
location.  
2. Close the battery door and press RESET to turn the  
sensor on.  
u
v
s
e
n
s
o
r
1
3. Press and hold CHANNEL and MEMORY on the main  
unit to initiate a signal search. The UVI sensor icon  
on the main unit will flash to show it is searching  
for the sensor. It will stop flashing when it has found  
the sensor. If the main unit cannot find the sensor,  
"- -" will appear on the LCD.  
14  
BAR609HGAmanual-ENG  
14  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE To get the most accurate readings, place the  
sensor in a position that has minimum obstructions (i.e.  
walls and doors) between it and the main unit. The  
sensor should be placed in an upright position, away  
from any shade or shadows that may affect how accurate  
the sensor provides readings.  
MOON PHASE  
The Calendar must be set for this feature to work.  
see set clock section:  
• Press or  
next or previous day.  
to view the moon phase for the  
• Press and hold or  
years (2001 to 2099).  
to scan quickly through the  
UV INDEX READINGS  
To interpret the UV readings on the LCD display, see  
the table below.  
New Moon  
Waxing Crescent  
BACKLIGHT  
UV MESSAGE UV INDEX  
PRECAUTION  
First Quarter  
Low  
Med  
High  
1-2  
3-5  
6-7  
Apply sunscreen  
Waxing Gibbous  
Full Moon  
Wear protective clothing  
Wear sunglasses and  
protective clothing  
Waning Gibbous  
Last Quarter  
Avoid the sun between  
10am and 4pm  
Very high  
Extreme  
8-10  
Waning Crescent  
11-25  
Very strong rays stay  
indoors  
BACKLIGHT  
Press SNOOZE / LIGHT to activate the backlight for  
8 seconds.  
RESET SYSTEM  
The RESET button is located behind the front button  
panel for the main unit. Press RESET when you change  
the batteries and whenever performance is not behaving  
15  
BAR609HGAmanual-ENG  
15  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
as expected (for example, unable to establish radio  
frequency link with sensor or Atomic Clock).  
Do not make any changes or modifications to this  
product. Unauthorized changes may void your right to  
use the product. The technical specification of this  
product and contents of this user guide are subject to  
change without notice. Images not drawn to scale.  
NOTE When you press RESET, all settings will return  
to default value, and you will lose all stored information.  
SAFETY AND CARE  
Clean the product with a slightly damp cloth and alcohol-  
free, mild detergent. Avoid dropping the product or  
placing it in a high-traffic location.  
WARNINGS  
This product is designed to give you years of service if  
handled properly. Observe the following guidelines:  
• Never immerse the product in water. This can cause  
electrical shock and damage the product.  
• Do not subject the main unit to extreme force, shock,  
or fluctuations in temperature or humidity.  
• Do not tamper with the internal components.  
• Do not mix new and old batteries or batteries of  
different types.  
• Do not use rechargeable batteries with this product.  
• Remove the batteries if storing this product for a long  
period of time.  
• Do not scratch the LCD display.  
16  
BAR609HGAmanual-ENG  
16  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
SPECIFICATIONS  
MAIN UNIT DIMENSIONS  
L x W x H  
Check here before contacting our customer service  
department.  
5.5 x 2.5 x 6.2 inches  
(142 x 63 x 158 mm)  
Weight  
12.96 ounces (366 g)  
with battery  
Problem Symptom  
Remedy  
Calendar  
Change language  
Strange date /  
month  
THERMO-HYGRO SENSOR DIMENSIONS  
Clock  
Cannot adjust Disable Atomic Clock  
clock  
L x W x H  
Weight  
3.6 x 2.4 x 0.79 inches  
(92 x 60 x 20 mm)  
Cannot auto- 1. Adjust batteries  
synch  
2.22 ounces (63 g)  
without battery  
2. Press RESET  
3. Manually activate  
Atomic Clock  
feature  
UV SENSOR DIMENSIONS  
W X H X L  
2.7 x 4 x 1.9 inches  
(67.7 x 102.5 x 47 mm)  
Temp  
Shows "LLL" Temperature is out-of-  
or "HHH"  
Weight  
2.89 ounces (82 g)  
without battery  
range  
Sensor  
Cannot locate Check batteries  
remote  
sensor  
TEMPERATURE  
Check location  
Unit  
°F or °C  
Indoor Range  
-23°F to 122°F  
(-5°C to 50°C)  
-22°F to 140°F  
(-30°C to 60°C)  
0.2°F (0.1°C)  
Cannot  
change  
channel  
Check sensors. Only  
one sensor is working  
Sensor  
Outdoor Range  
Resolution  
Data does  
not match  
main unit  
Initiate a manual sensor  
search  
17  
BAR609HGAmanual-ENG  
17  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK  
RELATIVE HUMIDITY  
Atomic Clock  
Clock display  
Hour format  
Time zone  
Auto or manual (disabled)  
HH:MM:SS  
Range  
25% to 95%  
1%  
Resolution  
Memory  
12hr AM/PM  
Minimum / maximum  
PA (Pacific), MO  
(Mountain), CE (Central)  
or EA (Eastern)  
BAROMETER  
Unit  
mb or inHg  
Calendar  
Alarm  
MM/DD; weekday in  
5 languages (E, D, F, I, S)  
Range  
700 to 1050 mb  
(20.67 to 30.01 inHg)  
Single alarm with  
2- minute crescendo and  
8-minute Snooze  
Resolution  
Altitude  
1 mb (0.03 inHg)  
-328 to 8203 feet  
Display  
Rainy, cloudy, partly  
cloudy, sunny  
POWER  
Main unit batteries  
Thermo-Hygro batteries  
UV Sensor  
3 x UM-3 (AA) 1.5V alkaline  
2xUM-4 (AAA) 1.5V alkaline  
2xUM-3 (AA) 1.5V alkaline  
THERMO-HYGRO SENSOR (THGR122NX)  
RF frequency  
Range  
433 MHz  
98 feet (30 meters)  
with no obstructions  
UV SENSOR (UVN128)  
Transmission  
Channel No.  
Every 40 seconds  
1-3  
UV Range  
328 feet (100 meters)  
Every 73 seconds  
Transmission  
18  
BAR609HGAmanual-ENG  
18  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ABOUT OREGON SCIENTIFIC  
FCC STATEMENT  
more about Oregon Scientific products such as digital  
cameras; MP3 players; children's electronic learning  
products and games; projection clocks; health and  
fitness gear; weather stations; and digital and conference  
phones. The website also includes contact information  
for our customer care department in case you need to  
reach us, as well as frequently asked questions and  
customer downloads.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and  
(2) This device must accept any interference received,  
including interference that may cause undesired  
operation.  
WARNING Changes or modifications to this unit not  
expressly approved by the party responsible for  
compliance could void the user's authority to operate  
the equipment.  
We hope you will find all the information you need on  
our website, however if you're in the US and would like  
to contact the Oregon Scientific Customer Care  
department directly, please visit: www2.oregonscientific.  
com/service/support OR Call 949-608-2848.  
NOTE This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation.  
For international enquiries, please visit: www2.  
oregonscientific.com/about/international/default.asp  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there  
is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
19  
BAR609HGAmanual-ENG  
19  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Increase the separation between the equipment and  
receiver.  
declare that the product  
Product No.: BAR609HGA  
• Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Product Name: Wireless Weather Station  
Manufacturer: IDT Technology Limited  
• Consult the dealer or an experienced radio / TV  
technician for help.  
Address:  
Block C, 9/F, Kaiser Estate, Phase 1,  
41 Man Yue St., Hung Hom, Kowloon,  
Hong Kong  
DECLARATION OF CONFORMITY  
is in conformity with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions: 1) This device  
may not cause harmful interference. 2) This device must  
accept any interference received, including interference  
that may cause undesired operation.  
The following information is not to be used as contact  
for support or sales. Please call our customer service  
com), or on the warranty card for this product) for all  
inquiries instead.  
We  
Name:  
Oregon Scientific, Inc.  
Address:  
19861 SW 95th Place, Tualatin, Oregon  
97062 USA  
Telephone No.:1-800-853-8883  
Fax No.: 1-503-684-3332  
20  
BAR609HGAmanual-ENG  
20  
05/1/18, 7:12 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2005 Oregon Scientific. All rights reserved.  
086-003767-011  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Musical Fidelity Stereo Amplifier M6500I User Manual
Nady Systems Stereo Equalizer MXE 612 User Manual
Napa Essentials Battery Charger 85 510 User Manual
NETGEAR Switch GS700TP User Manual
Nikon Digital Camera 13309 User Manual
Nokia Cell Phone SERIES 30 User Manual
Oregon Scientific Radar Detector BAR933HG User Manual
Oster Bread Maker Bread Maker User Manual
Oster Oven countertop oven User Manual
Panasonic Network Card 2SC2404 User Manual