Oregon Scientific Clock RMR613HGA User Manual

Wireless Thermo-Hygro Clock  
Model : RMR613HGA  
User Manual  
RMR613HGA lab test cover R2  
1
1/8/04, 7:02 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
ABOUT OREGON SCIENTIFIC  
Thank you for selecting the Oregon ScientificTM Wireless  
Thermo-Hygro Clock (RMR613HGA). This device  
bundles precise time keeping, dual alarm, and  
temperature and humidity monitoring features into a  
single tool you can use from the convenience of your  
home.  
more about other Oregon Scientific products such as  
digital cameras, hand-held organizers, health and fitness  
gear, and projection clocks. The website also includes  
contact information for our customer service department,  
in case you need to reach us.  
In this box, you will find:  
Main unit  
Remote sensor (THGR122NX)  
Keep this manual handy as you use your new product.  
It contains practical step-by-step instructions, as well  
as technical specifications and warnings you should  
know.  
2
RMR613HGA lab test R2  
2
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT OVERVIEW  
FRONT VIEW  
1. Clock / Alarm Area: Date, time, dual alarm; and  
Atomic Clock reception status  
2. Temperature Area: Readings; sensor channel  
number; remote unit reception and battery status  
1
3. Humidity / Comfort ZoneArea: Readings, comfort  
zone and battery status.  
4. Channel button: switch remote sensor  
5. Alarm button: view alarm status; set alarm  
2
3
4
5
3
RMR613HGA lab test R2  
3
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK VIEW  
1. MEM: view current, maximum, and minimum  
temperature / humidity readings  
2. DOWN: decrease setting / deactivate radio-  
controlled clock / activate or deactivate alarm  
3. UP: increase setting / activate radio-controlled clock /  
activate or deactivate alarm  
4. MODE: change display / settings  
5. Battery compartment  
6. °C / °F switch  
3
4
1
2
7. RESET hole  
5, 6, 7  
4
RMR613HGA lab test R2  
4
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE SENSOR (THGR122NX)  
1
1
2
2
3
4
1. LCD display  
1. Wall mount hole  
2. RESET  
2. LED Status indicator  
3. Channel number (1 - 3)  
4. Battery compartment  
(Battery compartment cover not shown)  
5
RMR613HGA lab test R2  
5
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANGE SETTINGS  
GETTING STARTED  
BATTERIES  
1. Press and hold MODE for 2 seconds to enter setting  
mode.  
Batteries are not supplied with this product. You will need  
to purchase 2 x UM-3 (AA) 1.5V alkaline batteries for  
the main unit, and 2 x UM-4 (AAA) 1.5V alkaline batteries  
for the remote sensor.  
2. Press UP or DOWN to change settings.  
3. Press MODE to confirm.  
REMOTE SENSOR (THGR122NX)  
Insert the batteries before first use, matching the polarity  
as shown in the battery compartment. For best results,  
install batteries in the remote sensor before the main  
unit. Press RESET after each battery change.  
This product is shipped with a THGR122NX Thermo/  
Hygro Sensor that collects Temperature and Humidity  
data. Data can be collected from up to 3 sensors.  
Additional sensors sold separately.  
NOTE Do not use rechargeable batteries.  
SETUP SENSOR  
Open the remote sensor battery compartment with a  
small Phillips screwdriver.  
shows when batteries are low.  
UNIT  
Main  
LOCATION  
Temperature Area when  
the INDOOR temperature  
is shown.  
Remote  
TemperatureArea when the  
OUTDOOR temperature is  
shown.  
6
RMR613HGA lab test R2  
6
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Insert the batteries, matching the polarity as shown  
in the battery compartment.  
For best results:  
Insert the batteries and select the channel and  
temperature unit before you mount the sensor.  
2. Set the channel. The switch is located in the battery  
compartment.  
Place the sensor out of direct sunlight and  
moisture.  
SWITCH  
Channel  
OPTION  
Do not place the sensor more than 30 meters  
(98 feet) from the main (indoor) unit.  
Channel 1 - 3. If you are using  
more than one sensor, select a  
different channel for each sensor.  
Position the sensor so that it faces the main  
(indoor) unit, minimizing obstructions such as  
doors, walls, and furniture.  
Place the sensor in a location with a clear view  
to the sky, away from metallic or electronic  
objects.  
3. Place the sensor near the main unit. Press RESET  
on the sensor to initiate signal sending between the  
sensor and the main unit. The reception icon on  
the main unit will blink for approximately 3 minutes  
while it is searching for the sensor. (Refer to the  
Search for Sensor section for more information.)  
Position the sensor close to the main unit during  
cold winter months as below-freezing  
temperatures may affect battery performance  
and signal transmission.  
4. Close the remote sensor battery compartment.  
5. Secure the sensor in the desired location using the  
wall mount or table stand.  
You may need to experiment with various locations to  
get the best results.  
DATA TRANSMISSION  
Data is sent from the sensor(s) every 40 seconds.  
The reception icon shown in the Temperature and  
Humidity Areas show the status.  
7
RMR613HGA lab test R2  
7
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ICON  
DESCRIPTION  
CLOCK  
Main unit is searching for  
sensors.  
This product can track the date and time for up to  
2 locations (Clock with Offset Hour). The US Atomic  
Clock in Boulder, Colorado automatically updates this  
information unless you disable the feature. The signals  
are collected by the main unit when it is within 1500 km  
(932 miles) of a signal.  
At least 1 channel has  
been found.  
Channel 1 is selected  
(number will change  
depending on the sensor  
you select)  
Initial reception takes 2 - 10 minutes, and is initiated  
when you first setup the unit, and whenever you press  
RESET. Once complete, the reception icon will stop  
blinking. The icon is shown in the Clock Area.  
--- shows in Temp  
/ Humidity Areas  
The selected sensor cannot  
be found. Search for the  
sensor or check batteries.  
SEARCH FOR SENSOR  
To search for a sensor, press and hold MEM and  
CHANNEL for 2 seconds.  
NOTE If the sensor is still not found, check the  
batteries, obstructions, and remote unit location.  
To force a manual search forAtomic Clock signals, press  
and hold UP for 2 seconds. If no signal is found, check  
the batteries.  
NOTE Signals from household devices such as  
doorbells, electronic garage doors, and home security  
systems may cause temporary reception failure. This is  
normal and does not affect general product performance.  
The reception will resume once the interference ends.  
NOTE  
If the Atomic Clock signal is received and the  
hour is incorrect, use the "hour offset" feature to adjust  
it to to the right value. Please see "SET CLOCK" on  
pg. 9 for instructions.  
8
RMR613HGA lab test R2  
8
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TURN ATOMIC CLOCK ON/OFF  
SWITCH CLOCK DISPLAY  
Perform this step if you cannot receive Atomic Clock  
signals. Press and hold DOWN for 2 seconds. Then,  
manually set the clock following the “Set Clock”  
instructions (below).  
Press MODE to toggle between Clock with Seconds,  
Clock with Weekday and Calendar, and Clock with Offset  
Hour display.  
The signal icon indicates that the Atomic Clock  
feature is ON. No icon means that it is OFF  
ALARMS  
This product has 2 alarms: a SingleAlarm and a Weekday  
Alarm. The Single Alarm can be set to go off at a specific  
time for a one-time event (for example, if you are napping  
on Saturday). The WeekdayAlarm will sound at the same  
time Monday - Friday (but not on weekends).  
SET CLOCK  
You only need to do this if you have disabled theAtomic  
Clock feature (for example, if you are too far from or  
cannot receive a signal).  
VIEW ALARM SETTINGS  
1. Press and hold MODE for 2 seconds. The Clock  
Press ALARM to display the Alarm settings you wish to  
Area will blink.  
S
view: Weekday  
W or Single  
.
2. Select the offset hour, 12 / 24 hour format, hour,  
minute, year, month, day, and language. Press UP  
or DOWN to change the setting. Press MODE to  
confirm.  
SET ALARM  
1. Press ALARM to display the type ofAlarm you wish  
to set: Weekday or Single.  
2. Press and hold ALARM for 2 seconds. The Alarm  
The language options are (E) English,  
NOTE  
(F) French, (D) German, (I) Italian, and (S) Spanish.  
settings will blink.  
3. Select the hour and minute. Press UP or DOWN to  
change settings. Press ALARM to confirm.  
9
RMR613HGA lab test R2  
9
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVATE ALARM  
TEMPERATURE AND HUMIDITY  
Press ALARM to switch to Weekday or SingleAlarm view.  
To activate or deactivate the alarm, press UP or DOWN.  
This product can display the following information from  
the remote sensors:  
VIEW BAROMETER AREA  
Alarm deactivated: --:--  
Current, minimum, and maximum temperatures  
and relative humidity percentages.  
Alarm activated: Alarm time is shown  
Comfort level  
W
S
The bell icons  
mode selected.  
and  
indicate the alarm display  
Data is collected and displayed every 40 seconds.  
SELECT TEMPERATURE UNIT  
SILENCE ALARM  
Slide the °C / °F switch into the desired location. The  
switch is located in the battery compartment. The setting  
for the main unit overrides the remote sensor setting.  
When the Alarm time is reached, the crescendo alarm  
will sound for 2 minutes. Press ALARM to silence it.  
The Weekday Alarm will sound at the same time the  
next day provided the next day is Monday - Friday. The  
SingleAlarm will not sound unless you manually activate  
it again.  
SELECT SENSOR CHANNEL  
Press CHANNEL to switch between sensors 1 - 3.  
The icon shows the selected sensor.  
10  
RMR613HGA lab test R2  
10  
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ZONE  
TEMPERATURE  
Any  
HUMIDITY  
>70%  
Kinetic-  
wave  
Icon  
20 – 25 ° C  
(68 - 77 ° F)  
40 – 70%  
Designat-  
ed  
Display  
Remote Remote Remote  
Display Display Display  
Channel 1 Channel 2 Channel 3  
Indoor  
Display  
<40%  
Any  
This information is shown in the Humidity Area when  
the current measurement is displayed.  
To auto-scan between sensors, press and hold  
CHANNEL for 2 seconds. Each sensor's data will be  
displayed for 3 seconds. To end auto-scan, press  
CHANNEL or MEM.  
RESET SYSTEM  
The RESET buttons are located in the battery  
compartment for the main unit and sensors. Press  
RESET when you change the batteries and whenever  
performance is not behaving as expected (for example,  
unable to establish radio frequency link with remote  
sensor or radio-controlled clock).  
NOTE If you use a sensor that collects only  
temperature data, humidity will not be shown.  
MINIMUM / MAXIMUM RECORDS  
Press MEM to toggle between current, maximum (MAX)  
and minimum (MIN) records for the selected sensor. To  
clear the records, press and hold MEM for 2 seconds.  
NOTE  
When you press RESET, all settings will return  
to default value, and you will lose all stored information.  
A beep will sound to confirm that the memory has been  
cleared.  
COMFORT ZONE  
The Comfort Zone indicates how comfortable the climate  
is, based on current temperature and humidity  
measurements.  
11  
RMR613HGA lab test R2  
11  
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do not make any changes or modifications to this  
product. Unauthorized changes may void your right to  
use the product. The technical specification of this  
product and contents of this user guide are subject to  
change without notice. Images not drawn to scale.  
SAFETY AND CARE  
Clean the product with a slightly damp cloth and alcohol-  
free mild detergent.Avoid dropping the product or placing  
it in a high-traffic location.  
TROUBLESHOOTING  
WARNINGS  
Check here before contacting our customer service  
department.  
This product is designed to give you years of service if  
handled properly. Observe the following guidelines:  
Problem  
Calendar  
Symptom  
Remedy  
Never immerse the product in water. This can  
cause electrical shock and damage the product.  
Change language  
Strange date /  
month  
(
9)  
Do not subject the main unit to extreme force,  
shock, or fluctuations in temperature or humidity.  
Clock  
Cannot adjust Disable Atomic Clock  
clock 9)  
(
Do not tamper with the internal components.  
Cannot auto- 1. Adjust batteries.  
synch 6)  
Do not mix new and old batteries or batteries of  
different types.  
(
2. Press RESET  
11)  
Do not use rechargeable batteries with this  
product.  
(
3. Manually activate  
Atomic Clock  
feature ( 8)  
Remove the batteries if storing this product for a  
long period of time.  
Do not scratch the LCD display.  
Temp  
Shows “LLL” Temperature is out-of-  
or “HHH” range  
12  
RMR613HGA lab test R2  
12  
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TEMPERATURE  
Unit  
Problem  
Symptom  
Remedy  
°C or °F  
-5 °C to 50 °C  
(23 °F to 122 °F)  
Remote  
sensor  
Cannot locate Check batteries ( 6)  
remote  
Indoor Range  
Check location ( 6)  
sensor  
Outdoor Range  
Resolution  
-20 °C to 60 °C  
Cannot  
change  
channel  
Check sensors. Only  
one sensor is working  
(-4 °F to 140 °F)  
(
6)  
0.1 °C (0.2 °F)  
Data does  
not match  
main unit  
Initiate a manual sensor  
search ( 8)  
RELATIVE HUMIDITY  
Range  
25% to 95%  
1%  
Resolution  
REMOTE SENSOR (THGR122NX)  
SPECIFICATIONS  
RF frequency  
Range  
433 MHz  
30 meters (98 feet)  
with no obstructions  
MAIN UNIT DIMENSIONS  
L x W x H  
123 x 49.5 x 165 mm  
(4.84 x 19.5 x 6.50 inches)  
Transmission  
Channel No.  
every 40 seconds  
1 - 3  
Weight  
245 grams (8.64 ounces)  
with batteries  
CLOCK  
REMOTE SENSOR DIMENSIONS  
Atomic Clock  
Clock display  
Hour format  
Time offset  
Auto or manual (disabled)  
HH:MM:SS  
L x W x H  
92 x 60 x 20 mm  
(3.6 x 2.4 x 0.79 inches)  
12hr AM/PM or 24hr  
+/- 9 hours  
Weight  
63 grams (2.22 ounces)  
without battery  
13  
RMR613HGA lab test R2  
13  
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Calendar  
Alarm  
MM/DD; weekday in  
5 languages (E, D, F, I, S)  
NOTE: This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications.  
Weekday and Single  
Alarm; 2- minute  
crescendo  
POWER  
Main unit batteries  
Sensor batteries  
2xUM-3 (AA) 1.5V alkaline  
2 x UM-4 (AAA) 1.5V  
alkaline  
However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following  
measures:  
FCC STATEMENT  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received,  
including interference that may cause undesired  
operation.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment  
and receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
Warning: Changes or modifications to this unit not  
expressly approved by the party responsible for  
compliance could void the user's authority to operate  
the equipment.  
Consult the dealer or an experienced radio/TV  
technician for help.  
14  
RMR613HGA lab test R2  
14  
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DECLARATION OF CONFORMITY  
is in conformity with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions:  
The information below is not to be used as contact for  
support or sales. Please call our customer service number  
or on the warranty card for this product) for all inquiries  
instead.  
1) This device may not cause harmful  
interference.  
2) This device must accept any interference  
received, including interference that may  
cause undesired operation.  
We  
Name:  
Oregon Scientific, Inc.  
Address:  
19861 SW 95th Place,  
Tualatin, Oregon 97062 USA  
Telephone No.:  
Fax No.:  
1-800-853-8883  
1-503-684-8883  
declare that the product  
Product No.:  
RMR613HGA  
Product Name:  
Manufacturer:  
Address:  
Wireless Thermo-Hygro Clock  
IDT Technology Limited  
Block C, 9/F, Kaiser Estate,  
Phase 1, 41 Man Yue St.,  
Hung Hom, Kowloon,  
Hong Kong  
15  
RMR613HGA lab test R2  
15  
1/17/04, 5:00 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2004 Oregon Scientific. All rights reserved.  
P/N.: 086-003326-01  
RMR613HGA lab test back cover  
1
12/29/03, 10:49 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Washer Dryer W 853 User Manual
Miller Electric Welder XLT 135 XLT 165 User Manual
Multiquip Portable Generator DCA 600SSK User Manual
Nikon Camcorder AF S User Manual
Oreck Patio Heater HW1000P User Manual
P3 International Pest Control Equipment P7906 User Manual
Panasonic Air Conditioner CS KE12NB41 CZ 18BT1U + CU KE12NK1 User Manual
Panasonic Laptop CF 35 User Manual
Panasonic Network Card 2SA1791J User Manual
Panasonic Patio Furniture EP1285 User Manual