Oracle Audio Technologies Stereo Amplifier DAC 1000 User Manual

Oracle DAC 1000  
D/A Converter + Pre-amplifier  
ORACLE AUDIO TECHNOLOGIES  
OWNER'S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION!  
Oracle DAC 1000 voltage is preset according to the country used.  
If you move after purchasing the DAC 1000, please contact Oracle Audio Technologies to modify your voltage  
wiring for proper use.  
To reduce the risk of fire or electrical shock, do not put the DAC 1000 in water, humidity or near a heat source. Do  
not remove the top cover , since they are not serviceable parts.  
Oracle Audio will not under any circumstances be liable for any incidental arising from improper use of the  
Dac 1000.  
* When purchasing your Oracle Audio DAC 1000;  
** The switches on the rear panel indicated "output and record" are preset in variable / bypass position.  
*** It is prohibited to connect the DAC 1000 and the power amplifier in "fixed mode".  
**** The connection should be at the "variable mode" position.  
UNPACKING:  
Open the box and carefully remove the protective foam from your unit.  
Remove the plastic bag.  
Included:  
-
-
-
-
Oracle Dac 1000 D/A converter + pre-amplifier  
Power cord  
Remote control  
Owner's manual  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURE  
1. High-End Preamplifier  
The DAC 1000 is specially designed to guarantee the full fidelity of high-end sound reproduction for almost a life  
time usage. High quality Digital volume control and dual monaural design provide excellent separation with  
pin-point imaging. Should you want to use DAC 1000 as a pure D to AConverter with a fixed output, a switch on the  
rear panel makes this change possible by selecting ‘fixed’ mode instead of normal ‘variable’ mode.  
Analog Input  
1 XLR Balanced Input  
1 RCA Unbalanced Input  
Analog Output (Main Out)  
1 XLR Balanced Output  
1 RCA Unbalanced Output  
Full Class A Output Stage  
High Quality Digital Volume Control  
Separate Transformers for the Digital and Analog stages  
2. Selectable, Upsampling Digital to Analog Converter  
Oracle DAC 1000 is a dedicated stand-alone D/A Converter.The DAC section has an upsampling function up to  
192kHz (24Bit) which is selectable by the user.  
Digital Input  
2 AES/EBU (Balanced)  
2 Coaxial (RCA)  
2 Optical (Toslink)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 Bit /192 kHz, Delta-Sigma DAC  
Custom designed digital filter  
Specially designed digital filtering circuitry is used in DAC 1000 to enhance the quality of sound by  
providing a cleaner signal with an excellent signal to noise ratio.  
PLL Circuit  
For a jitter-free signal, special PLL circuit is applied in the Digital section.  
3. Upsampled (24Bit/96kHz) Digital Recording Output  
The DAC 1000 is equipped with 4 digital outputs for direct digital recording. You can easily make high quality  
recordings of your favorite digital sources by connecting the cable between DAC 1000 and your digital recorder.  
Digital Output  
1 Balanced AES/EBU  
2 Coaxial  
1 Optical Toslink  
4. Surround (Input for surround processor)  
DAC1000 provides a ‘Surround’ input for a simple connection to your surround processor.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
INPUT / OUTPUT PORTS  
1. Connection of DAC 1000 D/A converter + pre-amplifier  
On the rear of DAC 1000, there are 2 Analog Outputs (1 Balanced, 1 Unbalanced) , 2 Analog Inputs (1 Balanced,  
1 Unbalanced), 6 Digital Inputs and 4 Digital Outputs and the analog ‘Surround’ input.  
Also included is a 12V trigger output.  
(fig 1 The Rear Panel)  
Note: Be sure to turn the power off when you change mode switches " Output " and " record".  
1) Analog Input  
BALANCED  
XLR Balanced input is used for the finest quality sound. Connect your equipment which has a  
XLR/Balanced Output by a Balanced Interconnect.  
UNBALANCED  
RCA Unbalanced input can be plugged into this input. Output from FM Tuner, Tape-Out, VCR-Out etc.  
can be connected into this input.  
SURROUND  
For home theater use only. Connect main out from your surround processor with this ‘Surround’ input.  
When in Surround mode, the volume control of the DAC 1000 is not valid. You should control the volume  
from the surround processor.  
*The display window on the front panel shows “SURROUND MODE”.  
Another press of ‘Surround’ button will bring you back to normal DAC 1000 status.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
2) Analog Output  
XLR Balanced & RCA Unbalanced outputs are provided for the connection of power amplifiers. Both outputs can  
be used at the same time.  
* We recommend XLR Balanced connection for better performance.  
FIXED/VARIABLE switch*  
The DAC 1000 is designed primarily to be used as a DAC/Preamp in which case the switch should be in  
‘VARIABLE’ mode (default mode).  
But, for those who already own a high-end preamplifier, the DAC 1000 can be switched to a  
fixed-output Digital to Analog Converter. To use the DAC 1000 as a pure DAC Stage, change  
output mode switch on the rear panel to ‘FIXED’ mode.  
*BE SURE TO TURN THE POWER OFF WHEN YOU CHANGE MODE SWITCH.  
3) Digital Input  
AES/EBU Balanced Digital is the best solution for Digital playback when connected to the transport with 110 ohm  
balanced digital cables.  
Coax 1 & 2 are generally used ports for digital connection.  
Optical Toslink is for optical connection. Use proper Toslink optical cable for this connection.  
4) Digital Output  
The DAC 1000 routes digital input signals to its 4 digital outputs. You can designate the specific input to be routed  
on 4 digital output ports by pressing ‘RECORD’ button either from the remote or from the front panel.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
1. Front Panel Buttons and Display  
(fig. 2 Front Buttons)  
(fig. 3 Front Display)  
STANDBY  
The main power switch is located on the back side.  
Once the main power switch is on, the display shows “ORACLE AUDIO DAC 1000” and changes to a  
normal display mode as follows:  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
REC_OFF 192 kHz  
When FIXED/VARIABLE switch is in “VARIABLE”: 
D1_AES1 0.0  
FIXED/VARIABLE switch is in “FIXED”:  
REC_OFF 192 kHz  
D1_AES1 FIXED  
When you push the ‘Standby’ switch to turn DAC 1000 off, ,the display shows “Standby”. A very small  
current is used when in “Standby” mode. We recommend leaving the main power switch ‘on’ under  
normal circumstances.  
When you are away from home and the DAC 1000 is not in use for a long time, turn the main power ‘off’.  
In normal use, use the “Standby” switch to activate and deactivate the system. If you have a 12V trigger  
cable connected to your power amplifier, a push of ‘Standby’ button will automatically turn on the power  
amplifier.  
In “Standby” mode, the DAC 1000 memorizes the volume level of all inputs. A sudden ‘Click’ sound can  
surprise you, so proper setting of the volume level control before going to ‘standby’ is always  
recommended.  
INPUT  
The DAC 1000 has a total of 8 inputs (6 digital inputs and 2 analog inputs).  
The first default input is ‘D1_AES1’ and the volume level is displayed on the lower right side of the  
display. Output level starts from 00.0 to 59.5 with a 0.5 step to show a total of 120 steps.  
Pressing ‘Input’ continuously shows the selection as follows.  
FIXED MODE  
D1_AES EBU1 D2_AES EBU2 D3_COAX1 D4_COAX2 D5_TOS1 D6_TOS2 D1_AES EBU1…  
VARIABLE MODE  
D1_AES EBU1 D2_AES EBU2 D3_COAX1 D4_COAX2 D5_TOS1 D6_TOS2 A1_BAL ꢁ  
A2_UNBAL  
SURROUND  
To use this function, the DAC 1000 should be in "variable mode".  
For home theater use only.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
UPSAMPLING  
Upsampling of the digital signal makes a very delicate sound change.  
DAC 1000 enables the user to choose one from 4 different sampling rates. They are Bypass, 48kHz,  
96kHz, and 192kHz.  
Bypass means sampling rate is just passed through as it is.  
Therefore, no change of sampling rate is done when ‘Bypass’ mode is selected.  
You should be the judge for the changes of the sound.  
Pressing ‘UPSAMPLE’ and experiment by yourself.  
RECORD  
Choose the input you want to record and upsampling (96kHz) Bypass/ Upsample selection on the rear  
panel.  
The status for record is displayed on the upper left side of the display.  
BYPASS MODE  
REC_OFF D1_AES EBU1 D2_AES EBU2 D3_COAX1 D4_COAX2 D5_TOS1 D6_TOS2 ꢁ  
REC_OFF…  
UPSAMPLE MODE  
REC_OFF D1_AES EBU1 D2_AES EBU2 D3_COAX1 D4_COAX2 D5_TOS1 D6_TOS2 ꢁ  
REC_OFF…  
The upper middle selection on the display identifes 96kHz digital output.  
Be sure to turn the power off when you change BYPASS / UPSAMPLE mode switch.  
VOL UP / VOL DOWN  
To control the volume, use the up and down buttons.  
Volume varies from 00.0 up to 59.5, and MAX (120 Step)  
When in “Standby” mode, all the volume level are memorized. And they are recovered when the unit is on  
again.  
The main power-off from the rear panel will erase the level information from DAC 1000.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Remote Control  
(fig. 2 Remote Control)  
2.1. REMOTE CONTROL HANDSET  
The remote control handset of your Oracle Dac 1000 can control the Oracle CD 1000 or  
other cd player model, by using the code RC-5.  
2.2 BATTERY INSTALLATION PROCEDURE  
Remove the back cover on the remote control handset.  
Install two "AAA" batteries following the proper polarity.  
Test the remote control handset for proper operation.  
Install back cover.  
NOTE:  
It is strongly recommended to use Alkaline batteries for an extended cycle operation of  
the remote control handset but more importantly to prevent any chemical leakage.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(a) SPECIFICATION  
Digital to Analog Converter Section  
. 24/192 Upsampling DAC  
. Selectable Upsampling (Bypass, 48, 96, 192kHz/24Bit)  
. 6 Digital Inputs: 2 AES/EBU, 2 Coax, 2 Toslink  
. 4 Digital Outputs: 1 AES/EBU, 2 Coax, 1 Toslink  
Preamp Section  
. Analog Inputs: 1 XLR Balanced, 1 RCA Unbalanced  
. Full Digital Volume Control (Fixed, Variable Mode Selectable)  
. Analog Outputs: 1 XLR Balanced, 1 RCA Unbalanced  
. Analog Output: Fully Balanced, Class-A Operation  
. Bypass for Surround Processor Connection  
Other Functions  
. Full Function Remote (Upsampling, Input, Volume, Mute, Surround)  
. Upsampled (96kHz/24Bit) Digital Recording Output, Selectable  
Dimension (WHD)  
480 X 100 X 400 mm  
Weight:  
12 kg  
WARRANTY  
Oracle Audio Technologies carries a 3 year warranty on new products.  
Always contact your authorized Oracle Audio dealer for service.  
The Oracle Dac 1000 must not have been modified in any circumstances or the warranty will be voided.  
ORACLE AUDIO TECHNOLOGIES  
Made in Canada  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTD Lawn Mower 105 thru 108 Series 130 thru 148 Series 730 thru 738 Series User Manual
Multi Tech Systems Network Card MT2834BLR User Manual
National Instruments Network Card FP QUAD 510 User Manual
NETGEAR Network Card XAV1601 User Manual
Nortel Networks Telephone i2021 Series User Manual
Omega Thermometer DPG110 120 User Manual
Oregon Scientific Thermometer THWR800 User Manual
Panasonic CD Player SC AK610 User Manual
Panasonic Personal Computer CF F9 User Manual
ParaBody Home Gym PBF502 User Manual