®
F O C U S
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Data Transferring..................................................................................................... 26
Display (In PC Mode).............................................................................................. 27
Multi-Media Introduction...................................................................................................... 32
Photo Format........................................................................................................... 32
Video Format........................................................................................................... 32
How to set-up File Type for Multi-Media with USB.................................................. 34
Compatibility Modes (Analog/Digital).................................................................................. 45
Tripod Mount the Projector................................................................................................... 46
2
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
The lightning flash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE
ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equip-
ment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of the projector and to
protect from over heating, it is recommended to install the projector in a location that does
not block ventilation. As an example, do not place the projector on a crowded coffee table,
sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that
restricts air flow.
2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock,
do not expose the projector to rain or moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such
as amplifiers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specified by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused.
Physical damage/abuse would be (but not limited to):
Unit has been dropped.
Power supply cord or plug has been damaged.
Liquid has been spilled on to the projector.
Projector has been exposed to rain or moisture.
Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers may expose you to
dangerous voltages or other hazards. Please call Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and
short out parts that could result in fire or electric shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
3
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Intended Use Statement
y
Operation temperature:
-
-
-
For 0 - 2500 ft, 5 - 35 °C
For 2500 - 5000 ft, 5 - 30 °C
For 5000 - 10000 ft, 5 - 25 °C
y
Maximum Humidity:
-
-
Operating: 5°C ~ 35°C, 80%RH (Max.), Non-condensing
Storage: -20°C ~ 60°C, 80%RH (Max.), Non-condensing
The ambient operating environment should be free of airborne smoke, grease, oil and
other contaminants that can affect the operation or performance of the projector.
Use of this product in adverse conditions will void the product warranty.
Safety Information
Please read, understand, and follow all safety information contained in these instruc-
tions prior to the use of this projector. Retain these instructions for future reference.
Explanation of Signal Word Consequences
Warning: Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury and/or property
damage.
Caution: Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury and/or property
damage.
Warning: Hazardous voltage
4
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning
To reduce the risk associated with hazardous voltage:
y
y
y
Do not modify this product in any way.
Do not attempt to service this projector.
There are no user-serviceable parts. Service to be performed only by a Optoma
authorized service provider using Optoma approved system components.
y
y
Do not use the wall power supply in a wet environment.
Do not use with a damaged wall power supply. Replace damaged part prior to
use.
To reduce the risk associated with fire and explosion:
y
y
Do not immerse the projector in any liquid or allow either to get wet.
Use only Optoma approved power supply.
To reduce the risks associated with choking:
y
Keep all small parts like the remote control battery away from young children and
pets.
To reduce the risk associated with hazardous voltage, impact, tripping, and
intense visible light:
y
Do not use this projector around unsupervised children.
Caution
To reduce the risks associated with hearing loss:
y
y
Be sure to read earphone manufacturer's instructions with respect to volume
level.
User is responsible to set a safe volume level.
To reduce the risk associated with explosion, and/or chemicals from a leaking
batteries:
y
y
Use only with battery type CR2025.
Orient the battery's plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control.
y
y
y
y
y
y
Do not leave the battery in the remote for an extended period of time.
Do not heat or expose the battery to fire.
Do not disassemble, short, or recharge battery
Do not carry batteries loose in your pocket or purse.
Avoid eye and skin contact in the event that battery leaks.
Do not recharge the battery near a heat source or in extremely hot conditions.
5
English
Download from Www.Somanuals.com. All Manuals Search And Download.
To reduce the risk associated with environmental contamination:
y
Dispose of all system components in accordance with applicable government
regulations.
To reduce the risks associated with LED bright light:
Do not stare directly into the projector lens.
To reduce the risks associated with tripping and falling:
Position the charging cord and data cables so that they are not a tripping hazard.
y
y
IMPORTANT NOTE: Do not expose the projector to direct sunlight in a closed space such as a
vehicle.
SAVE THESE INSTRUCTIONS
Safety Labels
J
Remote Control (Optional)
Model No. IR28012
6
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
Optoma and the Optoma logo are trademarks of Optoam Company. Adobe and the
Adobe logo are either registered trademarks or trademarks of Adobe Systems Incorpo-
rated in the United States and/or other countries. Microsoft, PowerPoint, and Excel are
registered trademarks of Microsoft Corporation. microSD and microSDHC are trade-
marks of the SD Association.
All other trademarks or registered trademarks are property of their respective compa-
nies.
Video and Audio Decoder Notices
MPEG-4 NOTICE
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO
LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER
FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD
("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY
A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE
MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER
USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM
AVC VIDEO NOTICE
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VID-
EO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE
AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IM-
PLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM
MPEG LAYER-3 NOTICE
Supply of this product does not convey a license nor imply any right to distribute MPEG
Layer-3 compliant content created with this product in revenue-generating broadcast
systems (terrestrial, satellite, cable and/or other distribution channels),streaming appli-
cations (via Internet, intranets and/or other networks), other content distribution systems
(pay-audio or audio-ondemand applications and the like) or on physical media (com-
pact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and
the like). An independent license for such use is required.
7
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Notices
FCC STATEMENT - CLASS B
This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instruction manual may cause interference to
radio communications. It has been tested and found to comply with the limits for a Class
“B” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are
designed to provide reasonable protection against such interference when operated in
a residential installation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
y
y
y
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
y
Consult the dealer or an experienced radio/TV technician for help.
NOTICE: This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Industry Canada regulatory information
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
The user is cautioned that this device should be used only as specified within this
manual to meet RF exposure requirements. Use of this device in a manner inconsistent
with this manual could lead to excessive RF exposure conditions.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC
equipment provided that the following conditions are met. If the cables include a EMI
ferrite core, attach the ferrite core end of the cable to the projector. Use the cables
which are included with the projector or specified.
Note: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Complies with IDA Standards DA103121
8
English
Download from Www.Somanuals.com. All Manuals Search And Download.
CE Statement
ElectroMagnectic Compatibility Statement: Meets 2004/108/EC Directive
Low Voltage Directive: Meets 2006-95-EC Directive.
WEEE Statement
The following information is only for EU-members States:
The mark shown to the right is in compliance with Waste Electrical and Electronic Equip-
ment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose
the equipment as unsorted municipal waste, but use the return and collection systems
according to local law.
9
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Package Contents
Your projector comes with all the items shown below. Ensure that you have all
the items, and contact your local reseller or service center if anything is missing.
S U C O F
Projector
Power cable
AC adapter
Universal 24-pin to
VGA/Audio cable
Quick start card
and documentation
Carrying case
Remote control
NOTE: The remote control is shipped with battery.
10
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel
1
2
9
8
7
3
4
5
6
8
#
1
2
Name
Description
Power
Turns the projector on or off.
Keystone ad-
justment
Press to adjust image distortion caused by tilting the projector
(+/-40 degrees).
NOTE: This function is not supported on Multi-Media function.
3
Auto adjust
Press to synchronize the projector to the input source.
NOTE: Auto Adjust does not operate if the on-screen display (OSD) is
displayed.
4
5
Error LED
Temp LED
Error LED is solid amber, one of the LED has failed. The projector
will automatically shut down.
If the TEMP amber indicator is blinking, one of the following prob-
lems could be occurring:
y
y
Internal temperature of the projector is too high.
The fans has failed.
6
7
Menu
Press to activate the OSD. Use the directional keys and the Menu
button to navigate through the OSD.
Source
Press to enter Source menu and select an input source.
NOTE: This function is not supported on Multi-Media function.
8
9
Enter
Press to confirm the selection item.
Four Direction- Press to navigate through the On-Screen Display (OSD) Menu
al Select Keys items.
13
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
#
1
2
Name
Power
Source
Description
1
2
Turns the projector on or off.
10
11
Press to enter Source menu
and select an input source.
3
12
13
14
15
3
4
Menu
Enter
Press to activate the OSD.
4
5
Press to confirm the selec-
tion.
6
7
8
9
Play/Pause
Press to play/pause media
file.
5
6
7
8
Aspect Ratio
Press to change aspect ratio
of a displayed image.
Press to increase the vol-
ume.
Volume up
Stop
Press to stop playing media
file.
Volume down
Press to decrease the
volume.
9
Press to search backward.
Rewind
10
Allows you to select the
display mode.
LED mode
11 Blank screen
Press to hide/unhide the
image.
12 Up/Down/Left/ Press to navigate through
Right
the On-Screen Display
(OSD) Menu items.
13 Keystone ad-
Press to adjust image distor-
tion caused by tilting the
projector (+/-40 degrees).
justment
14
15 Fast Forward
Press to search forward.
14
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Remote Control Battery
1. Remove the battery holder by holding down the side
release firmly and pulling out the battery holder.
2. Insert a CR2025 coin cell battery and align the polarity
correctly according to the marking in the battery holder.
T
L
CR2025O
V
3
NOTE: When you use the remote control for the first time, there
is a plastic sheet between the battery and its contact. Remove
the sheet before use.
T
L
CR2025O
V
3
3. Replace the battery holder.
T
L
CR2025O
V
3
Operating Range with Remote Control
20°
7 m/22.97 feet
NOTE: Actual operating range may slightly differ from the diagram. Additionally, a weak battery
reduces or eliminates the operating range of the remote control.
15
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connecting to a Computer
1
5
3
4
2
#
1
2
3
4
5
Description
Power cord
AC adapter
Universal 24-pin to VGA/Audio cable
HDMI cable *
USB-A to USB-A cable *
* NOTE: The accessory is not shipped with your projector.
16
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning On/Off the Projector
Turning Your Projector On
NOTE: Turn on the projector before you turn on the source (computer, DVD player, etc.). The
Power button light blinks amber until pressed.
1. Connect the power cord with AC adapter and appropriate signal cables to the pro-
jector.
2. Press the Power button.
3. Turn on your source (computer, DVD player, etc).
4. Connect your source to the projector using the appropriate cable.
5. The input source is determined by the last connected input source. (By default, the
input source of the projector is set to Multimedia). Change the input source of the
projector if necessary.
6. If you have multiple sources connected to the projector, press the Source button on
the remote control or control panel to select the desired source.
Turning Your Projector Off
1. Press the Power button. Follow the instruction displayed on screen to properly turn
NOTE: The “Press Power Button to Turn off Projector” message will appear on the screen. The
message disappears after 5 seconds or you can press the Menu button to clear it.
off the projector.
2. Press the Power button again. The cooling fans continue to operate for 3~5 sec-
onds.
3. Disconnect the power cord and AC adapter from the electrical outlet and the projec-
tor.
19
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projected Image
Raising the Projector Height
Raise the projector to the desired display angle, and use the front tilt adjustment wheel
to fine-tune the display angle.
Lowering the Projector Height
Lower the projector, and use the front tilt adjustment wheel to fine-tune the display
angle.
Front tilt adjustment wheel
(Angle of tilt: 0 to 6 degrees)
Adjusting the Projector Focus
IMPORTANT NOTE: To avoid damaging the projector, ensure that the adjustment wheels are
fully retracted before moving the projector or placing the projector in its carrying case.
Rotate the focus tab until the image is clear. The projector focuses at distances ranging
between 3.18 ft to 8.48 ft (97 cm to 258 cm).
Focus tab
F O C U S
20
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Size
Width
Distance
Diagonal
30” (76.2 cm)
40” (101.6 cm)
50” (127.0 cm)
60” (152.4 cm)
70” (177.8 cm)
80” (203.2 cm)
Height
15.75” (40 cm)
21.26” (54 cm)
26.38” (67 cm)
31.89” (81 cm)
37.01” (94 cm)
42.52” (108 cm)
25.59” (65 cm)
33.86” (86 cm)
42.13” (107 cm)
50.79” (129 cm)
59.45” (151 cm)
67.72” (172 cm)
3.18’ (0.97 m)
4.23’ (1.29 m)
5.28’ (1.61 m)
6.36’ (1.94 m)
7.41’ (2.26 m)
8.48’ (2.58 m)
NOTE: This graph is for user reference only.
FOCUS
22
English
Download from Www.Somanuals.com. All Manuals Search And Download.
User Controls
Using the On-Screen Display
1. The projector has a multi-language On-Screen Display (OSD) Menu that can be
displayed with or without an input source.
2. Press the Menu button on the control panel or the remote control to enter the Main
Menu.
3. To select an option, press the
remote control.
or
buttons on your projector’s control panel or
4. Use the
tings.
or
buttons on the control panel or remote control to adjust the set-
5. To exit the OSD, press the Menu button directly on the control panel or the remote
control.
Main Menu
Language
Allows you to set the language for the OSD. Press
guages and press to change the language.
and
to select different lan-
With 3D function
Without 3D function
23
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Source
The Source menu allows you to select your projector's input source.
Auto Source
If you select and press
available input source.
VGA
to activate, the Auto option will automatically find the next
Press
HDMI
Press
to detect a VGA signal.
to detect a HDMI signal.
24
English
Download from Www.Somanuals.com. All Manuals Search And Download.
USB
Allows you to playback the photo, Audio, or Video files from your USB flash disk.
MicroSD
Allows you to playback the photo, Audio, or Video files from your microSD card.
Internal Memory
Allows you to playback the photo, Audio, or Video files from internal memory of the
projector.
Display Mode
The Display Mode menu allows you to optimize the display image. The options are:
Bright, PC, Cinema, and Photo mode.
Audio
The Audio menu allows you adjust the volume setting of your projector.
Press
to decrease the volume and
to increase the volume.
25
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Adjust
Auto Adjust automatically adjusts the projector's Horizontal Position, Vertical Posi-
tion, Frequency, and Tracking in VGA source (PC mode).
OSD Reset
Select and press
to reset all settings to its factory default.
The below warning message appears:
Reset items include both computer sources and Video source settings.
Data Transferring
Select and press
to action.
The below warning message appears:
Advanced
See “Advanced Menu” on pages 27~31.
FW Version
Display the current projector’s firmware version.
26
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Menu
The Advanced menu allows you to change settings for Display, Image, and Power.
Display (In PC Mode)
Select and press
ing options:
to activate display settings. The display menu provides the follow-
Horizontal Position
Press
to move the image right and
to move the image left.
Vertical Position
Press
to move the image up and
to move the image down.
Frequency
Allows you to change the display data clock frequency to match the frequency
of your computer’s graphics card. If you see a vertical flickering wave, use the
Frequency control to minimize the bars. This is a coarse adjustment.
Tracking
Synchronize the phase of the display signal with the graphic card. If you experience
an unstable or flickering image, use the Tracking to correct it. This is a fine
adjustment.
27
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Aspect Ratio
Allows you to select the aspect ratio to adjust how the image appears. Options are:
Origin, 16:9 and 4:3.
y
y
y
Origin: Select Origin to maintain the aspect ratio of the image projector
according to the input source.
16:9: The input source scales to fit the width of the screen to project a 16:9
screen image.
4:3: The input source scales to fit the screen and projects a 4:3 image.
Zoom
Press
or
to zoom and view the image.
NOTE: Closed caption option is available for NTSC only.
Display (In Video Mode)
Select and press
ing options:
to activate display settings. The display menu provides the follow-
Aspect Ratio
Allows you to select the aspect ratio to adjust how the image appears. Options are:
Origin, 16:9 and 4:3.
y
y
y
Origin: Select Origin to maintain the aspect ratio of the image projector
according to the input source.
16:9: The input source scales to fit the width of the screen to project a 16:9
screen image.
4:3: The input source scales to fit the screen and projects a 4:3 image.
Zoom
Press
or
to zoom and view the image.
28
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Image (In PC Mode)
Select and press
options:
to activate image settings. The image menu provides the following
Brightness
Press
and
to adjust the brightness of the image.
to adjust the display contrast.
Contrast
Press
and
White Intensity
Press and use
and
to display white intensity.
NOTE: If you adjust the settings for Brightness, Contrast, Color Temperature, and White Inten-
sity the projector automatically switches to User mode.
Image (In Video Mode)
Select and press
options:
to activate image settings. The image menu provides the following
Brightness
Press
and
to adjust the brightness of the image.
29
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast
Press
and
to adjust the display contrast.
Color Temperature
Allows you to adjust the color temperature. The screen appears cooler at higher
color temperatures and warmer at lower color temperatures.
Saturation
Allows you to adjust the video source from black and white to fully saturated color.
Press
to increase the amount of color in the image and
to decrease the
amount of color in the image.
Sharpness
Press
Tint
to increase the sharpness and
to decrease the sharpness.
Press
to increase the amount of green in the image and
to decrease the
amount of green in the image (available for NTSC only).
White Intensity
Press
and use
and
to display white intensity.
NOTE:
1. If you adjust the settings for Brightness, Contrast, Color Temperature, Saturation, Sharp-
ness, Tint, and White Intensity the projector automatically switches to User mode.
30
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
Select and press
options:
to activate power settings. The power menu provides the following
Power Saving
Select Off to disable Power Saving mode. By default, the projector is set to enter
power saving mode after 120 minutes of no activity. A warning message appears on
screen showing a 60 seconds countdown before switching to power saving mode.
Press any button during the countdown period to stop the power-saving mode.
You can also set a different delay period to enter power saving mode. The delay
period is the time you want the projector to wait without an input signal. Power saving
can be set to 30, 60, 90, or 120 minutes. If an input signal is not detected during the
delay period, the projector turns off. To turn on the projector, press the Power button.
Direct Power On
Choose On to activate Direct Power mode. The projector will automatically power
on when AC power is supplied, without pressing the Power button on the projector
control panel or on the remote control.
Projection
Allows you to select the projector mode, depending upon how the projector is
mounted.
y
y
Front: This is the default option.
Rear: The projector reverses the image so that you can project from behind a
translucent screen.
y
y
Front Ceiling: The projector turns the image upside down for ceiling-mounted
projection.
Rear Ceiling: The projector reverses and turns the image upside down. You can
project from behind a translucent screen with a ceiling-mounted projection.
Speaker
Select On or Off to turn on or turn off the speaker.
Display Hour
Display the projection time.
31
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Introduction
Multi-media format supported:
Photo Format
Image Type
(Ext Name)
Sub Type
Encode Type
Max Pixels
Max Size
Jpeg / Jpg
Baseline
YUV420
YUV422
YUV440
YUV444
YUV420
No Limitation
2GB
Progressive
64x panel
resolution
2GB
YUV422
YUV440
YUV444
BMP
64x panel
resolution
Video Format
File Format
Video Format Decode Max Max Bit Rate Audio Format Profile
res.
(bps)
MPG,MPEG
MPEG1
H.264
1920x1080
30fps
30M bps
MPEG1 L1-3
AVI, MOV,
MP4, MKV
1920x1080
30fps
30M bps
MPEG1 L1-3
HE-ACC v1
AC3
BP/MP/HP
AVI, MOV,
MP4,
MPEG4
Xivd
1920x1080
30fps
30M bps
30M bps
HE-ACC v1
SP/ASP
HD
AVI, MOV,
MP4,
1920x1080
30fps
MPEG1 L1-3
HE-ACC v1
AVI
MJPEG
VC-1
8192x8192
30fps
30Mbps
30M bps
MPEG1 L1-3
HE-ACC v1
Baseline
WMV
1920x1080
30fps
WMA8/9(V1/
v2)
SP/MP/AP
32
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Format
Music Type (Ext Name)
MP3
Sample Rate (KHz)
Bit Rate (Kbps)
8-320
8-48
22-48
8-48
8-48
8-48
WMA
5-320
ADPCM-WAV
PCM-WAV
32-384
128-1536
8-256
AAC
Office Viewer Format
File Format Support Version
Page/Lines Limitation
Size Limitation
Up to 75MB
Adobe PDF PDF 1.0, 1.1, 1.2, 1.3, 1.4
Up to 1000 pages (One File)
MS Word
MS Excel
British Word 95,
Becasue office viewer does not
load all pages of MS/Word file
at the same time, there are not
abvious limitations of page and
line.
Up to 100MB
Word 97, 2000, 2002, 2003
Word 2007(.docx),
Word2010(.docx),
British Excel 5,95
Row Limit: up to 595
Up to 15MB
Excel 97, 2000, 2002, 2003 Column Limit: up to 256
Excel 2007(.docx),
Excel 2010(.docx)
Sheet: up to 100
Office XP Excel
Note: Any one of three limitations
above can not appear on one
excel file simultaneously
MS
British PowerPoint 97
Up to 1000 pages (One File)
Up to 19MB
PowerPoint
PowerPoint 2000, 2002,
2003
PowerPoint 2007(.pptx)
PowerPoint 2010(.pptx)
Office XP PowerPoint
PowerPoint presentatin
2003 and earlier (.ppx)
PowerPoint presentatin
2007 and 2010 (.ppsx)
33
English
Download from Www.Somanuals.com. All Manuals Search And Download.
How to set-up File Type for Multi-Media with USB
NOTE:
1. A USB flash disk must be plugged into the projector if you want to use the multimedia
USB function.
2. Please don’t connect USB port for camera since it would be exist compatibility problem.
Follow these steps to playback the Photo, Video, Music, or Office Viewer files on your
projector:
1. Connect the power cable with AC adapter and turn on the projector by pressing the
Power button.
2. Plug in a USB flash disk to your projector.
3. Access the Source menu, select the USB option and press the
button. The im-
age input source will automatically switch to Multimedia Menu when USB option is
selected in this step.
4. Select the multi-media files: Photo, Video, Music, or Office Viewer, and then press
the
to start playing. Or select the SETUP option to change settings for Photo,
Video, Music, or Office Viewer.
34
English
Download from Www.Somanuals.com. All Manuals Search And Download.
How to set-up File Type for Multi-Media with MicroSD
NOTE: A microSD card must be plugged into the projector if you want to use the multimedia
microSD function.
Follow these steps to playback the Photo, Video, Music, or Office Viewer files on your
projector:
1. Connect the power cable with AC adapter and turn on the projector by pressing the
Power button.
2. Plug in a MicroSD card to your projector. The image input source will be automati-
cally switched to microSD screen when you plug in a microSD card.
3. Access the Source menu, select the MicroSD option and press the
button. The
image input source will automatically switch to Multimedia Menu when MicroSD op-
tion is selected in this step.
4. Select the multi-media files: Photo, Video, Music, or Office Viewer, and then press
the
to start playing. Or select the SETUP option to change settings for Photo,
Video, Music, or Office Viewer.
35
English
Download from Www.Somanuals.com. All Manuals Search And Download.
How to set-up File Type for Multi-Media with Internal Memory
Follow these steps to playback the Photo, Video, Music, or Office Viewer files on your
projector:
1. Connect the power cable with AC adapter and turn on the projector by pressing the
Power button.
2. Access the Source menu, select the Internal Memory option and press the
button. The image input source will automatically switch to Multimedia Menu when
Internal Memory option is selected in this step.
3. Select the multi-media files: Photo, Video, Music, or Office Viewer, and then press
the
to start playing. Or select the SETUP option to change settings for Photo,
Video, Music, or Office Viewer.
36
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Media Main Menu
Multi-Media SETUP for USB, MicroSD, and Internal Memory
The multi-media setup menu allows you to change settings for Photo, Video,
Music, and Office Viewer.
NOTE: Multi-media setup menu and set are the same for the USB, MicroSD, and Internal
Memory.
37
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Setup
Select and press
following options:
to activate photo setup menu. The photo setup menu provides the
Display Mode
Press
or
to select the display mode of the photo on the screen. Options are:
File List, Thumbnail, and Slideshow.
Display Ratio
Press
(full screen).
Slideshow Duration
Press or to select the slideshow duration. The image will automatically switch
or
to select the display ratio of the photo as Auto (original ratio) or Full
to the next photo after the time out. Options are: 5 sec, 15 sec, 30 sec, 1 min, 5
min, and 15 min.
Slideshow Repeat
Select On to repeat slideshow always. Or select Off to stop slideshow when it goes
to the last page.
Slideshow Effect
Press
or
to select what slideshow effect you want. Options are: Random,
Rect., Off, Snake, Partition, Erase, Blinds, Lines, GridCross, Cross, and Spiral.
NOTE: Slideshow Duration, Slideshow Repeat, and Slideshow Effect function only support
Slideshow mode.
38
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Setup
Select and press
following options:
to activate video setup menu. The video setup menu provides the
Display Ratio
Press
or
to select the display ratio of the Video.
y
y
Auto: Keep original aspect ratio.
Full: Full screen.
Play Mode
Press or
to select the video play mode. Options are: Once, Repeat Once,
Repeat, and Random.
Auto Play
Select On to play the video automatically while entering the video list.
39
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Setup
Select and press
following options:
to activate music setup menu. The music setup menu provides the
Play Mode
Press
or
to select the video play mode. Options are: Once, Repeat Once,
Repeat, and Random.
Show Spectrum
Select On to show the spectrum plot while music is playing.
Auto Play
Select On to play the music automatically while entering the music list.
40
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendices
Troubleshooting
If you experience problems with your projector, see the following troubleshoot-
ing tips. If the problem persists, contact your local reseller or service center.
Problem
Possible Solution
No image appears on the
screen
y
y
Ensure that the projector is turned on.
Ensure that you have chosen the correct input source
on the OSD Source menu.
y
Ensure the external graphics port is enabled. If images
are not displayed properly, please upgrade the video
driver of your computer.
y
y
Ensure that all the cables are securely connected.
Ensure that the pins of the connectors are not bent or
broken.
Partial, scrolling or
incorrectly displayed
image
y
y
Press the Auto Adjust button on the control panel.
-
If you are using a portable computer, set the resolution of
the computer to WXGA (1280 x 800).
If you experience difficulty in changing resolutions, or
if your monitor freezes, restart all the equipment and
the projector.
y
y
y
y
If images are not displayed properly, please upgrade
the video driver of your computer.
The screen does not dis-
play your presentation
If you are using a portable computer, press the toggle
output settings. Example: [Fn]+[F4].
Image is unstable or
flickering
Adjust the tracking in the OSD Display settings of the
Advanced menu (in PC Mode only).
Image has vertical flick-
Adjust the frequency in the OSD Display settings of
ering bar
the Advanced menu (in PC Mode only).
Image is out of focus
1. Adjust the focus ring on the projector lens.
2. Ensure that the projection screen is within the required
distance from the projector (3.18 ft [97 cm] to 8.48 ft
[258 cm]).
42
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible Solution
The image is stretched
when displaying a 16:9
DVD
y
The projector automatically detects the input signal
format. It will maintain the aspect ratio of the projected
image according to input signal format with an Original
setting.
y
y
y
If the image is still stretched, adjust the aspect ratio
in the Display settings of the Advanced menu in the
OSD.
LED warning indicator
(LED) is solid amber
A projector LED has failed and the projector will auto-
matically shut down. If the problem persists, contact
Optoma.
TEMP warning indicator
(LED) is blinking amber
The projector has overheated. The display automati-
cally shuts down. Turn the display on again after the
projector cools down. If the problem persists, contact
Optoma.
y
y
If the projector fan fails, the projector will automatically
shut down. Clear the projector mode by pressing and
holding the Power button for 10 seconds. Please wait
for about 5 minutes and try to power up again. If the
problem persists, contact Optoma.
The remote control is
not operating smoothly
or works only within a
limited range
The battery may be low. Check if the LED indication
from the remote is too dim. If so, replace with a new
CR2025 battery.
43
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Guiding Signals
TEMP
Warning
LED
Warning
Power
Projector
Status
Description
(Blue/Amber)
(Amber)
(Amber)
Standby
mode
Projector in Standby mode. Ready to Amber
OFF
OFF
power on.
Flashing
BLUE
Power on
Projector in Normal mode, ready to
display an image.
OFF
OFF
OFF
Projector
overheated
Air vents might be blocked or ambient OFF
temperature may be above 35 ºC.
The projector automatically shuts
down. Ensure that the air vents are
not blocked and that the ambient
temperature is within operational
range. If the problem persists, contact
us.
Amber
Flashing
(cycling
turn-off
1sec and
turn-on
3sec)
Fan
breakdown
One of the fans has failed. The
projector automatically shuts down. If
the problem persists, contact us.
OFF
Amber
OFF
Flashing
(cycling
turn-off
0.5sec and
turn-on
2sec)
LED failure
LED shutdown.
OFF
OFF
AMBER
44
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatibility Modes (Analog/Digital)
Resolution
Refresh Rate (Hz)
Hsync Frequency (KHz)
Pixel Clock (MHz)
640 x 350
70.087
70.087
70.087
59.940
75.000
85.008
60.317
75.000
85.061
60.004
75.029
84.997
59.855
60.020
75.025
59.87
31.469
31.469
31.469
31.469
37.500
43.269
37.879
46.875
53.674
48.363
60.023
68.677
44.772
63.981
79.976
47.776
47.712
65.290
55.935
67.500
49.702
44.772
31.469
31.250
45.000
37.500
33.750
28.125
47.396
60.289
68.633
49.306
62.795
70.635
25.175
28.322
28.322
25.175
31.500
36.000
40.000
49.500
56.250
65.000
78.750
94.500
74.500
108.000
135.000
79.500
85.500
146.250
106.500
148.500
83.500
74.500
27.000
27.000
74.250
74.250
74.250
74.250
68.250
102.250
117.500
71.000
106.500
136.750
720 x 400
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 720
1280 x 1024
1280 x 1024
1280 x 768
1366 x 768
1680 x 1050
1440 x 900
1920 x 1080
1280 x 800
1280 x 720
720 x 480 p60
720 x 576 p50
1280 x 720 p60
1280 x 720 p50
1920 x 1080 i60
1920 x 1080 i50
1280 x 768 -R60
1280 X 768
1280 X 768
1280 x 800 -R
1280 x 800
1440 x 900
59.789
59.954
59.887
60.000
59.810
59.855
59.940
50.000
60.000
50.000
60.000
50.000
59.995
74.893
84.837
59.910
74.934
74.984
45
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Tripod Mount the Projector
Screw a standard tripod into the screw hole on the projector.
NOTE:
1. The tripod and ceiling mount are optional accessories.
2. Please note that damage resulting from incorrect installation will void the warranty.
Unit: mm
54.0
F O C U S
Insert Nut 1/4” - 20 UNCxL7.5mm
(Screw hole for tripod)
46
English
Download from Www.Somanuals.com. All Manuals Search And Download.
|
MTD Lawn Sweeper 190 459A 100 User Manual
MTD Trimmer 316745400 User Manual
Multi Tech Systems Network Card MVP210 SS User Manual
NEC Computer Monitor FP1350 FP950 User Manual
NeumannBerlin Microphone BS 45a User Manual
Nokia Cell Phone NOKIA 3100 User Manual
Omega Thermometer A12P User Manual
Onkyo Speaker System HTP L50 User Manual
Optoma Technology Home Theater Screen DP MW3084A User Manual
Panasonic Air Conditioner CW C80YU User Manual