Optimus Clock Radio CR 329 User Manual

12-1629.fm Page 1 Friday, August 6, 1999 10:01 AM  
Cat. No. 12-1629  
CR-329 AM/FM Cassette Clock Radio  
Auto-Stop — reduces tape wear by  
turning off and releasing the tape-  
handling parts when the tape reaches  
its end.  
Your Optimus CR-329 AM/FM Cas-  
sette Clock Radio offers you all the  
conveniences of an alarm clock, an  
AM/FM radio, and a cassette tape  
player in one attractive and functional  
package. You can wake to a sound,  
the radio, a cassette tape, or a combi-  
nation. You can fall asleep with the ra-  
To reduce the risk of fire or  
shock hazard, do not expose this product  
to rain or moisture.  
WARNING:  
dio  
playing,  
and  
the  
radio  
automatically shuts off at a preset  
time.  
CAUTION  
RISK OF ELECTRIC  
!
Its features include:  
SHOCK. DO NOT OPEN.  
TO REDUCE THE RISK  
CAUTION:  
Red Numeric Display with Bright-  
ness Control — makes the clock easy  
to read.  
OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER OR BACK. NO  
USER-SERVICEABLE  
PARTS  
INSIDE. REFER SERVICING TO  
QUALIFIED PERSONNEL.  
Sleep Timer — plays the radio for up  
to 1 hour and 59 minutes before it au-  
tomatically turns off.  
This symbol is intended to  
alert you to the presence of  
uninsulated dangerous volt-  
age within the product’s  
enclosure that might be of  
sufficient magnitude to con-  
Snooze Feature — temporarily silenc-  
es the alarm for about 9 minutes so  
you can get a few extra minutes of  
sleep.  
stitute  
a
risk of electric  
shock. Do not open the  
product’s case.  
Battery Back-Up — keeps the clock  
running and the alarm set if power is  
interrupted.  
This symbol is intended to  
inform you that important  
operating and maintenance  
instructions are included in  
the literature accompanying  
this product.  
!
© 1999 Tandy Corporation.  
All Rights Reserved.  
Optimus and RadioShack are registered trademarks used by Tandy Corporation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12-1629.fm Page 3 Friday, August 6, 1999 10:01 AM  
Hold down ALARM, then repeatedly  
press (or hold down) HOUR until the  
desired hour appears. PM lights when  
you set a PM hour. Then hold down  
ALARM, then repeatedly press (or  
hold down) MINUTE until the desired  
minute appears.  
CLOCK OPERATION  
Setting the Time  
Hold down TIME, then repeatedly  
press (or hold down) HOUR until the  
display shows the correct hour setting.  
PM lights when you set a PM hour.  
Then hold down TIME, and repeatedly  
press (or hold down) MINUTE until the  
display shows the correct minute set-  
ting.  
To view the alarm time at any time,  
hold down ALARM.  
Turning the Alarm On/Off  
Follow these steps to have the radio  
turn on at the set alarm time.  
Note: To prevent changing the time  
accidentally, always release HOUR or  
MINUTE before you release TIME.  
1. Set the radio to the desired sta-  
tion and volume (see “Playing the  
Radio” on Page 5).  
Changing the Display  
Brightness  
2. Set ON/OFF/AUTO/ALARM to  
AUTO. ALARM lights.  
To change the brightness of the dis-  
play, move DIMMER on the back of the  
clock radio to HI or LO.  
Setting the Alarm Time  
You can set an alarm for a specified  
time so the buzzer sounds, the radio  
plays, a cassette tape plays, or the  
buzzer sounds and a cassette tape  
plays.  
At the preset alarm time, the radio  
turns on and plays for up to 2 hours.  
To turn off the radio, set ON/OFF/  
AUTO/ALARM to OFF.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
12-1629.fm Page 4 Friday, August 6, 1999 10:01 AM  
To have the buzzer sound at the set  
alarm time, set ON/OFF/AUTO/ALARM  
to ALARM. ALARM lights.  
and plays for the rest of the alarm peri-  
od.  
At the preset alarm time, the buzzer  
sounds.  
Follow these steps to have only the  
cassette player turn on at the set alarm  
time.  
To stop the buzzer immediately, set  
ON/OFF/AUTO/ALARM to OFF.  
1. Load a cassette tape (see “Load-  
ing a Cassette Tape” on Page 5).  
2. Set ON/OFF/AUTO/ALARM to  
To stop the buzzer and turn on the ra-  
dio, set ON/OFF/AUTO/ALARM to  
AUTO to play the radio for about 2  
hours or to ON to leave the radio on.  
AUTO. ALARM lights.  
3. Press PLAY.  
At the preset alarm time, the cassette  
plays until it reaches the end of the  
side, then it automatically stops. After  
the cassette stops, the radio turns on  
and plays for the rest of the alarm peri-  
od.  
Follow these steps to have the buzzer  
and cassette player turn on at the set  
alarm time.  
1. Load a cassette tape (see “Load-  
ing a Cassette Tape” on Page 5).  
2. Set ON/OFF/AUTO/ALARM to  
Using Snooze  
ALARM. ALARM lights.  
To temporarily silence the alarm (buzz-  
er, radio, cassette, or buzzer/cassette),  
press SNOOZE. This silences the  
alarm for about 9 minutes.  
3. Press PLAY.  
At the preset alarm time, the buzzer  
sounds and the cassette plays.  
You can repeat this cycle as many  
times as you like. To turn off the alarm  
so it does not sound again, set ON/  
OFF/AUTO/ALARM to OFF.  
To stop the cassette and buzzer im-  
mediately,  
set  
ON/OFF/AUTO/  
ALARM to OFF and press STOP.  
To stop the buzzer but have the cas-  
sette continue playing, set ON/OFF/  
AUTO/ALARM to AUTO. The cassette  
plays until it reaches the end of the  
side, then it automatically stops. After  
the cassette stops, the radio turns on  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
12-1629.fm Page 5 Friday, August 6, 1999 10:01 AM  
2. Press SLEEP. 0:59 appears on  
RADIO OPERATION  
the display and the radio turns on.  
Playing the Radio  
1. Set ON/OFF/AUTO/ALARM to  
ON.  
3. Hold down SLEEP. Repeatedly  
press HOUR to increase the  
sleep time to 1 hour and 59 min-  
utes, or repeatedly press MINUTE  
to decrease the minutes setting.  
2. Set FM/AM to the desired band.  
Notes:  
The radio plays for the set length of  
time then automatically turns off. To  
turn off the radio before the pro-  
grammed sleep time has elapsed,  
press SNOOZE.  
• The clock radio has a built-in  
AM antenna. For the best AM  
reception, rotate the radio.  
• The FM antenna is built into the  
power cord. For the best FM  
reception, fully extend the  
power cord.  
CASSETTE OPERATION  
Loading a Cassette Tape  
3. Turn TUNING to the desired sta-  
tion.  
1. Take up any slack in the tape by  
turning one of the cassette’s hubs  
with a pencil. (If you do not  
remove excess slack, the tape  
could tangle in the playback  
mechanism.) Then open the cas-  
sette compartment door by gently  
pulling open the front of the radio.  
4. Adjust VOLUME to a comfortable  
listening level.  
5. To turn off the radio set ON/OFF/  
AUTO/ALARM to OFF.  
Using the Sleep Timer  
You can set the radio to play for up to  
1 hour and 59 minutes then automati-  
cally turn off.  
1. Set ON/OFF/AUTO/ALARM to  
AUTO, ALARM, or OFF.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
12-1629.fm Page 6 Friday, August 6, 1999 10:01 AM  
2. Load the cassette into the cas-  
sette guides on the compartment  
door. Insert it with its open edge  
up and the full reel to the right.  
The side facing you is the side  
that plays.  
CARE  
To enjoy your AM/FM Cassette Clock  
Radio for a long time:  
• Keep the clock radio dry. If it gets  
wet, wipe it dry immediately.  
3. Close the cassette compartment  
door.  
• Use and store the clock radio only  
in normal temperature environ-  
ments.  
Playing a Cassette Tape  
• Handle the clock radio gently and  
carefully. Don’t drop it.  
1. Set ON/OFF/AUTO/ALARM to  
ON.  
• Keep the clock radio away from  
dust and dirt.  
2. Load a cassette tape.  
• Wipe the clock radio with a damp  
cloth occasionally to keep it look-  
ing new.  
3. Press PLAY. The cassette plays  
until it reaches the end of the side,  
then it automatically stops.  
Notes:  
Modifying or tampering with the clock  
radio’s internal components can cause  
a malfunction and invalidate its war-  
ranty. If your clock radio is not per-  
forming as it should, take it to your  
local RadioShack store for assistance.  
• Press STOP, then FAST-F to  
rapidly wind the tape forward.  
Press STOP, then PLAY again  
to resume play.  
• During fast-forwarding, the  
tape does not automatically  
stop when it reaches the end.  
Press STOP to release the  
tape-handling parts and protect  
the tape.  
4. Adjust VOLUME to a comfortable  
listening level.  
5. Press STOP to stop playback  
before it automatically stops.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
12-1629.fm Page 7 Friday, August 6, 1999 10:01 AM  
2. Unplug the clock radio’s power  
cord from the AC outlet.  
FCC Information  
Your radio might cause TV or radio in-  
terference even when it is operating  
properly. To determine whether your  
radio is causing the interference, turn  
off your radio. If the interference goes  
away, your radio is causing the inter-  
ference. Try to eliminate the interfer-  
ence by:  
3. Open the cassette compartment  
door.  
4. Press PLAY to expose the tape-  
handling parts.  
5. Use a cotton swab dipped in  
denatured alcohol or tape head  
cleaning solution to clean the tape  
head, pinch roller, tape guides,  
and capstan  
• moving your radio away from the  
TV or other radio  
• connecting your radio to an outlet  
that is on a different electrical cir-  
cuit from the receiver  
6. When you finish cleaning, press  
STOP, close the cassette com-  
partment door, then plug the clock  
radio’s power cord into a standard  
AC outlet.  
• contacting your local RadioShack  
store for help  
Your local RadioShack store sells a  
complete line of cassette deck clean-  
ing supplies.  
If you cannot eliminate the interfer-  
ence, the FCC requires that you stop  
using the radio.  
Restoring Tape Tension and  
Quality  
Cleaning the Tape-Handling  
Parts  
After you play a cassette tape several  
times, the tape might become tightly  
wound on the reels. This can cause  
playback sound quality to deteriorate.  
Dirt, dust or particles of the tape’s coat-  
ing can accumulate on the tape heads  
and other parts that the tape touches.  
This can greatly reduce the perfor-  
mance of the cassette player. After ev-  
ery 20 hours of tape player operation,  
clean the tape-handling parts with a  
cassette deck cleaning kit or use the  
following cleaning procedure.  
To restore the sound quality, fast-  
forward the tape from the beginning to  
the end of one side, then turn it over  
and fast-forward it to the end of the oth-  
er side. Then loosen the tape reels by  
gently tapping each side of the cas-  
sette’s outer shell on a flat surface.  
1. Set ON/OFF/AUTO/ALARM to  
OFF.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
12-1629.fm Page 8 Friday, August 6, 1999 10:01 AM  
Caution: Be careful not to damage the  
cassette when tapping it. Do not touch  
the exposed tape or allow any sharp  
objects near the cassette.  
Backup Battery ........................9V DC  
Power Output (max.)..............500 mW  
Speaker ........... 3 Inch, 8 ohm, 0.5 W  
Dimensions  
(HWD): ........ 41/2 × 89/10 × 31/10 Inches  
(114 × 226 × 79 mm)  
SPECIFICATIONS  
Frequency Range:  
Weight ................... 1 lb, 15 oz (850 g)  
FM: ......................... 88–108 MHz  
AM: .......................530–1710 kHz  
Specifications are typical; individual  
units might vary. Specifications are  
subject to change and improvement  
without notice.  
Tape Speed ............................ 17/8 ips  
Power Source: 120V AC 60 Hz, 10 W  
Limited Ninety-Day Warranty  
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use  
for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack  
franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND  
ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CON-  
TAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY  
TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE  
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY  
BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVE-  
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL,  
OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES.  
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of incidental or conse-  
quential damages, so the above limitations or exclusions may not apply to you.  
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of  
purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the  
defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design;  
or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the  
property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service.  
Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be  
charged for repair or replacement of the product made after the expiration of the warranty period.  
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, im-  
proper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other  
incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service  
Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance  
costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102  
04/99  
RadioShack  
A Division of Tandy Corporation  
Fort Worth, Texas 76102  
08A99  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

NAD Stereo Receiver 3240PE User Manual
Navman GPS Receiver LA000508 User Manual
NETGEAR Network Router CG814WG User Manual
Nikon Projector VT650 User Manual
NordicTrack Treadmill NTL14940 User Manual
Olympus Camcorder FE 120 User Manual
Omnimount Indoor Furnishings Silhouette 48 User Manual
Onkyo DVD Player DV SP1000 User Manual
Onkyo Stereo Receiver HT R758 User Manual
Patton electronic Network Router 4110 Series User Manual