Remote Interactive Dock
Contents
Important Safety Instructions . . . . . . . . 2
DS-A3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 3
Instruction Manual
Getting Started. . . . . . . . . . . . . . . . . . . . . . 4
About the RI Dock . . . . . . . . . . . . . . . . . . . .4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Package Contents. . . . . . . . . . . . . . . . . . . . .5
Compatible iPod models . . . . . . . . . . . . . .5
Getting to Know the RI Dock . . . . . . . . . .6
Remote Controller . . . . . . . . . . . . . . . . . . . .7
Hooking Up the RI Dock. . . . . . . . . . . . . . .9
Using the RI Dock. . . . . . . . . . . . . . . . . . .10
Setting the OSD Mode . . . . . . . . . . . . . . 10
Controlling Your iPod without the OSD . .10
Controlling Your iPod with the OSD. . . . . .10
Music Mode . . . . . . . . . . . . . . . . . . . . . . . . 11
Video Mode . . . . . . . . . . . . . . . . . . . . . . . . 13
Resume Function . . . . . . . . . . . . . . . . . . . 13
Setting the TV System (European model
only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Other Functions . . . . . . . . . . . . . . . . . . . . 14
Setting the Remote Controller’s ID. . . 15
Using Your Amp’s Remote Controller 16
Thank you for purchasing an Onkyo product.
Please read this manual carefully before making
any connections or using this product. By follow-
ing these instructions, you’ll get the best audio
performance and the most listening pleasure
from your Onkyo product. Keep this manual for
future reference.
Troubleshooting . . . . . . . . . . . . . . . . . . .17
Specifications . . . . . . . . . . . . . . . . . . . . . .18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
1. Recording Copyright—Unless it’s for personal
use only, recording copyrighted material is ille-
gal without the permission of the copyright
holder.
For Canadian Models
NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
For models having a power cord with a polarized
plug:
2. Care—Occasionally you should dust the unit all
over with a soft cloth. For stubborn stains, use a
soft cloth dampened with a weak solution of
mild detergent and water. Dry the unit immedi-
ately afterwards with a clean cloth. Don’t use
abrasive cloths, thinners, alcohol, or other chem-
ical solvents, because they may damage the fin-
ish or remove the panel lettering.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modèle canadien
REMARQUE: CET APPAREIL NUMÉRIQUE DE LA
CLASSE B EST CONFORME À LA NORME NMB-003 DU
CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
3. Never Touch this Unit with Wet Hands—Never
handle this unit or its power cord while your
hands are wet or damp. If water or any other liq-
uid gets inside this unit, have it checked by your
Onkyo dealer.
For some models
Before use, connect the appropriate AC plug adapter
to the AC adapter.
The type of plug adapter depends on the place of
purchase.
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the equip-
ment.
Disconnect
Connect
NOTE:
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
OPEN
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
For European Models
Declaration of Conformity
We,
ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding
technical standards such as EN60065,
•
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
Consult the dealer or an experienced radio/TV
technician for help.
EN55013, EN55020 and EN61000-3-2, -3-3.
GROEBENZELL, GERMANY
K. MIYAGI
ONKYO EUROPE ELECTRONICS GmbH
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
About the RI Dock
Features
With the Onkyo RI Dock, you can easily play the
❑ Easily links iPod touch (1st generation),
iPod touch (2nd generation), iPod classic,
iPod nano (3rd generation), iPod nano
(4th generation), iPod (4th generation),
iPod (5th generation), iPod nano (2nd
generation), iPod nano (1st generation),
iPod photo, iPod mini with Onkyo A/V
systems
*
*
music stored on your Apple iPod through
your Onkyo audio system and enjoy great
sound, and watch iPod slideshows and videos
on your TV. In addition, the onscreen display
(OSD) allows you to view, navigate, and select
your iPod’s contents on your TV, and with the
supplied remote controller, you can control
your iPod from the comfort of your sofa. You
can even use your Onkyo amp’s remote con-
troller to operate your iPod.
❑ iPod Video Playback
❑ Resume Music and Video Playback
Function
, which stands for Remote Interactive, is an
exclusive Onkyo control system that allows all
-capable Onkyo audio components to be
turned on or off together, and your amp to turn
on automatically and select the appropriate
input source when playback is started on a
source component. It also allows you to control
your iPod with your amp’s remote controller.
❑ Component Video Outputis supported by
iPod nano (3rd generation) and iPod
classic at 480p or 576p Resolution, and by
iPod touch at 480i or 576i Resolution
❑ Onscreen Display to Show iPod’s contents
❑ Dedicated Remote Control Supplied
❑ Gold-Plated Audio/Video Outputs
❑ Connectable with any Onkyo RI-
compatible A/V Systems or Components
In this manual, the DS-A3 Remote Interactive
Dock is referred to as the “RI Dock.”
❑ Remote Control Operability via Onkyo's
Remote Interactive (RI) System
❑ Recharging Function via AC
❑ Available in Black Only
For the latest information on the RI Dock, see
*
iPod is a trademark of Apple Inc., registered in the U.S. and
other countries.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started—Continued
Compatible iPod models
Package Contents
•
•
•
•
•
•
•
•
•
•
•
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic*
iPod nano (4th generation)
iPod nano (3rd generation)*
iPod (5th generation)
iPod (4th generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPod photo
Make sure you have the following items:
• AC adapter
• DS-A3 Remote Interactive Dock
• AV cable
•
cable
iPod mini
• Component video conversion cable
* On these models, the Video menu for the
onscreen display (OSD) can be displayed on a
TV connected to the RI Dock.
Note:
•
• Remote controller
• Button-type battery
(CR 2025)
Before using the RI Dock, update your
iPod with the latest software, available
from the Apple Web site at:
• Instruction manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started—Continued
Getting to Know the RI Dock
iPod adapter
iPod slot
Dock connector
Remote control sensor
RI MODE switch
Set it to match your amp’s
input display (see below).
HDD
TAPE
or
DOCK
Amp input
display
DC IN 5V 1.5A jack
TAPE
HDD/DOCK
RI MODE switch
See your amp’s instruction manual for details on
changing the input display.
jack
AUDIO OUT L/R jacks
VIDEO OUT jack
(COMPONENT/VIDEO)
To control your iPod with your
amp’s remote controller, select
the matching remote control
Amp remote
controller’s mode mode.
■ Adjusting the iPod Adaptor
The iPod adapter needs to be adjusted to match your partic-
ular iPod. Insert your iPod into the RI Dock. If there’s a gap
between the back of your iPod and the adapter, turn the
adapter counterclockwise to close the gap. Turning the
adapter counterclockwise moves it forward. Turning it clock-
wise moves it backward.
Forward
Backward
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started—Continued
Remote Controller
Used to select the previous menu on the
onscreen display and iPod.
DSELECT button
Used to select songs/videos and menus on
the onscreen display and iPod.
EPrevious and Next [
]/[
] buttons
1
2
J
K
The Previous [ ] button selects the previ-
ous track. During playback it selects the
beginning of the current track. The Next
3
4
[
] button selects the next track.
Press and hold the Previous [
rewind. Press and hold the Next [
ton to fast forward.
] button to
] but-
5
6
7
L
M
FSHUFFLE button (Music mode only)
Sets the Shuffle function to Songs, Albums,
or Off.
GPlay/Pause [
/
] button
8
9
Starts or pauses playback of the selected
song/video.
HPLAYLIST/PAGE MODE [ ]/[ ] buttons
Used to select the page modes. During play-
back or when the OSD mode is set to Off,
they select playlists.
IALBUM/PAGE [ ]/[ ] buttons
Used to page through the playlists (artists,
albums, songs, genres, composers) dis-
played on yourTV. During playback or when
the OSD mode is set to Off, they select
albums.
JRESUME button
Used to resume playback. It has no function
when the OSD mode is set to Off.
Remove the plastic film before using
the remote controller.
KUp and Down arrow [ ]/[ ] buttons
Used to navigate songs/videos and menus
on the onscreen display and iPod.
ASETUP button
While pressing the SETUP button, they
switch the video output mode between
Composite mode and Component mode.
Used to set theTV system (PAL/NTSC), video
output mode (composite/component) and
the remote controller’s ID.
LREPEAT button
BMODE button
Sets the Repeat function to One, All, or Off.
Sets the OSD mode to On or Off.
MVOLUME [ ]/[ ] buttons
Adjust the volume on the Onkyo amp or AV
receiver. They don’t affect the iPod’s volume
setting.
CMENU button
Used to switch the function mode between
Music mode and Video mode.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started—Continued
Replacing the Battery
Aiming the Remote Controller
Use only a battery of the same type (CR 2025).
When using the remote controller, point it
toward the RI Dock’s remote control sensor, as
shown below.
1. To open the battery compartment, press
the small hollow and slide open the cover.
Remote control sensor
RI Dock
2. While pressing the tab as shown, slide out
the old battery.
Slide the new battery into the battery com-
partment with the positive side facing up.
Notes:
•
If the RI Dock is placed on top of another
component, the remote controller’s sig-
nal may be obstructed and the remote
controller may not work reliably.
3. Slide the cover shut.
•
The remote controller may not work reli-
ably if the RI Dock is subjected to bright
light, such as direct sunlight or inverter-
type fluorescent lights. Keep this in mind
when installing.
•
If another remote controller of the same
type is used in the same room, or the RI
Dock is installed close to equipment that
uses infrared rays, the remote controller
may not work reliably.
Notes:
•
If the remote controller doesn’t work reli-
ably, try replacing the battery.
•
•
•
Don’t put anything on top of the remote
controller, such as a book or magazine,
because a button may be pressed contin-
uously, thereby draining the batteries.
The remote controller may not work reli-
ably if the RI Dock is installed in a rack
behind colored glass doors. Keep this in
mind when installing.
•
If you intend not to use the remote con-
troller for a long time, remove the battery
to prevent damage from leakage or cor-
rosion.
An expired battery should be removed as
soon as possible to prevent damage from
leakage or corrosion.
•
The remote controller will not work if
there’s an obstacle between it and the RI
Dock’s remote control sensor.
Caution: Replacing the battery incorrectly
may cause an explosion. Use only a battery
of the same type or an equivalent.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started—Continued
Hooking Up the RI Dock
Depending on the Onkyo amp that you’re
Conversion Cable.
using, choose connection method A or B.
The input you use depends on the type of
Onkyo amp you have. See your amp’s
instruction manual for details.
A: Connect the RI Dock’s AUDIO OUT L/R jacks
and VIDEO OUT jack to an RI Dock-compati-
ble input on your Onkyo amp. (You might
need to change the input display to “HDD”
or “DOCK.”)
B: Connect the RI Dock’s AUDIO OUT L/R jacks
to the TAPE IN jacks on your Onkyo amp.
And connect the RI Dock’s VIDEO OUT jack
directly to your TV.
2. Using the supplied
RI Dock’s jack to an
cable, connect the
jack on one of
the Onkyo components in your system.
3. Connect the supplied AC adapter to the RI
Dock’s DC IN jack.
Note: When the AC adapter is unplugged or
not connected to the RI Dock, the RI Dock
See your amp’s instruction manual for details.
will output no sound or video,
will not work, and your iPod’s battery will
not be charged.
functions
AC adapter
Wall
outlet
Caution: Connect the supplied
cable to
jacks. Do not connect headphones
jack, as it will damage your equip-
only
to the
ment.
Supplied AV cable
Supplied component
video conversion cable
amp
■ If you’ve connected the RI Dock’s AUDIO
OUT L/R jacks to your amp’s TAPE IN jacks
and also want to connect the RI Dock’s
VIDEO OUT jack to your amp
AUDIO
INPUT
White
Red
L
R
Connect the RI Dock’s VIDEO OUT jack to an
unused video input on your amp.
Y
PB
PR
VIDEO
INPUT
COMPONENT VIDEO IN
Yellow
amp or TV
When you want to watch an iPod slideshow or
video, select the video input source first, and
then select the TAPE input source. Your amp
will output the audio being fed to the TAPE
input, and because the video source doesn’t
change when theTAPEinput sourceis selected,
it’ll continue to output the video being fed to
the video input.
Supplied
cable
amp or TV
amp
1. Using the supplied AV cable, connect the RI
Dock’s AUDIO OUT L/R jacks to a suitable
audio input on your amp. And connect the
RI Dock’s VIDEO OUT jack to a video input
on your Onkyo amp or TV.
■ What to do if you already have a compo-
nent connected to your amp’s TAPE input
or RI Dock-compatible input
Connect the RI Dock to an unused AV input on
your amp, and select the input source manu-
ally.
If your Onkyo amp or TV has a component
video input jack, connect the RI Dock's
COMPONENT VIDEO OUT jacks to a compo-
nent video input jack on your Onkyo amp
or TV, using the supplied Component Video
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RI Dock
Setting the OSD Mode
Notes:
•
To prevent dock connector damage,
Set the OSD (onscreen display) mode before
you start using the RI Dock.
don’t twist your iPod when inserting or
removing it, and be careful not to knock
over the RI Dock while your iPod is
inserted.
Don’t use the RI Dock with any other iPod
accessories, such as FM transmitters and
microphones, because they may cause a
malfunction.
1. Plug in the AC adapter.
2. Turn on your TV and amp, and select the
appropriate inputs on your TV and amp.
•
•
3. Insert your iPod into
the RI Dock.
You can’t change the OSD mode while
watching an iPod slideshow or video.
4. Select the video output mode depending
on the video connection.
Controlling Your iPod without the OSD
While pressing the remote controller's
[SETUP] button, press the Up [ ] button for
the component video connection, press the
To control your iPod without the OSD, set the
OSD mode to Off, and use the remote control-
ler as explained on page 7.
[
] button for the composite (default)
connection.
Controlling Your iPod with the OSD
5. Use the remote controller’s
[MODE] button to set the
OSD mode.
When the OSD mode is set to On and your iPod
is inserted in the RI Dock, you can navigate and
select your music or video on your TV.
On: Playlists (artists, albums, songs, and so
on) are displayed on your TV, and you
can navigate and select your music or
video while looking at your TV. While
this mode is selected, your iPod dis-
plays the Onkyo logo.
Off: Nothing is displayed on your TV and
you navigate and select your contents
by using your iPod’s display.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RI Dock—Continued
■ Using the Page Modes
Music Mode
With the page modes, you can quickly locate
your favorite songs even when your song lists,
artist lists, and so on are very long. There are
four page modes: L, M, S, and P. These stand for
Large, Medium, Small, and Page. In P mode, you
can page through the list consecutively. In the
S, M, and L modes, you can page through the
list in progressively larger steps.
■ Playing Songs
MENU
1. Use the PAGE MODE Up and Down [ ]/[
]
/
buttons to select a page mode.
Depending on the size of the list, it may not
be possible to change the page mode.
SELECT
2. Use the PAGE Up and Down [ ]/[ ] but-
tons to page up or down the list.
First song on First song on the Page mode
the next page
previous page
1. Press the remote controller's [MENU] but-
ton to select the Music mode.
Note:
2. Use the Up and Down arrow [ ]/[ ] but-
tons to select Playlists, Artists, Albums,
Genres, Songs or Composers, and then
press the [SELECT] button.
•
While playing a playlist, you can use the
PLAYLIST Up and Down [ ]/[ ] buttons
to select other playlists. While playing an
album, you can use the ALBUM Up and
Down [ ]/[ ] buttons to select other
albums.
■ Song Shuffle
You can play all of the songs in your iPod in ran-
dom order.
•
Press the [MENU] button repeatedly to
select the music top menu and use the Up
and Down arrow [ ]/[ ] buttons to select
“Shuffle Songs,”and then press the [SELECT]
button.
Top Menu
3. Use the Up and Down arrow [ ]/[
]
buttons and [SELECT] button to select a
song, and press the [SELECT] button to start
playback.
When selecting songs, use the [MENU]
button to go back to the previous menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RI Dock—Continued
■ Now Playing
During playback, you can display information
about the current song.
•
Press the [MENU] button repeatedly to
select the music top menu and use the Up
and Down arrow [ ]/[ ] buttons to select
“Now Playing,”and then press the [SELECT]
button.
Repeat mode
Playback status
Shuffle mode
Playback time
Total time
Shuffle modes
Repeat modes
Song shuffle
All repeat
Album shuffle
One-track repeat
■ Screen Saver
You can set the time at which the screen saver
is activated to any one of the following four
options: 1 minute, 5 minutes, 10 minutes, or Off
(screen saver off).
When the screen saver activates, the onscreen
display on yourTV disappears. Press any button
on the remote controller to cancel the screen
saver and resume the onscreen display.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RI Dock—Continued
Video Mode
Resume Function
■ Playing Videos
With the Resume function, you can resume
playback of the song/video that was playing
when you removed your iPod from the RI Dock
or changed the OSD mode to Off.
1. Select and play a song/video displayed on
your TV.
MENU
2. During playback or while playback is
paused, remove your iPod from the RI Dock
or change the OSD mode to Off. The current
song/video is remembered.
/
SELECT
3. When you reinsert your iPod into the RI
Dock (set the OSD mode to On), press the
[RESUME] button to resume playback of the
remembered song/video.
Notes:
•
The Resume function can be used only
when the OSD mode is set to On.
If the AC adapter is disconnected, the
remembered song/video will be forgot-
ten.
1. Press the remote controller's [MENU] but-
•
ton to select the Video mode.
2. Use the Up and Down arrow [ ]/[ ] but-
tons to select Movies, Music Videos, TV
Shows, Video Podcasts, or Rentals, and then
press the [SELECT] button.
•
•
If the Resume function is used during
shuffle playback, when the iPod is rein-
serted in the RI Dock, playback will
resume with any song/video.
The Video Menu is properly displayed
only when the language setting on the
iPod is set to English.
Repeat mode
Be sure to set the language to English
before you use the Video Menu.
Top Menu
Repeat modes
All repeat
One-track repeat
3. Use the Up and Down arrow [ ]/[
]
buttons and [SELECT] button to select a
video, and press the [SELECT] button to
start playback.
When selecting videos, use the [MENU]
button to go back to the previous menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RI Dock—Continued
• Timer Play
Setting the TV System (European
model only)
You can use your amp’s Timer function to turn
on your amp and iPod and start playback at a
specified time.
While the OSD mode is set to On, you can set
the RI Dock’s video output to PAL or NTSC.
If the onscreen display looks distorted on your
TV, try changing the TV system.
• Using Your Amp’s Remote Controller
You can use your amp’s remote controller to
control basic iPod functions (see page 16).
•
While pressing and holding down the
[SETUP] button, press the VOLUME Up [
button for more than 3 seconds to select
Operating Notes:
]
•
The RI Dock must be connected to your
amp with both an
cable to use the
cable and an audio
functions.
NTSC, or press the VOLUME Down [ ] but-
ton for more than 3 seconds to select PAL.
•
If your amp doesn’t support the System
On, System Off, Auto Power On, and
Direct Change functions, you’ll need to
turn your amp on and off and select the
input source manually.
Other Functions
■
Functions
Depending on your amp and generation of
iPod, you may also be able to use the following
functions.
•
Before you select another input source,
stop iPod playback to prevent your amp
from selecting the iPod input source by
mistake.
Note:
•
Your amp may take several seconds to
startup, so you might not hear the first
few seconds of the first song/video.
•
•
If any accessories are connected to your
iPod, your amp may not be able to select
the input source properly.
While your iPod is in the RI Dock, its vol-
ume control has no effect. If you adjust
your iPod’s volume control while it’s in the
RI Dock, make sure it’s not set too high
before you reconnect your headphones.
• System On Function
When you turn on your amp, the iPod turns on
as well. With some amps, you may need to
press the [ON] button on your amp’s remote
controller’s twice to turn on the other compo-
nents in your system.
• System Off Function
When you turn off your amp, the iPod turns off
as well.
*
• Auto Power On Function
If you start iPod playback while your amp is on
Standby, your amp will automatically turn on
and select your iPod as the input source. Then,
your iPod will start playback.
*
• Direct Change Function
If you start iPod playback while listening to
another input source, your amp will automati-
cally select your iPod as the input source.
*
If you use your iPod’s controls to start an iPod slideshow or
video, these functions will not work, so use the remote con-
troller instead.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RI Dock—Continued
■ Using Your iPod’s Alarm Clock
Setting the Remote Controller’s ID
You can use youriPod’s Alarm Clock function to
automatically turn on your iPod and amp at a
specified time. Your amp’s input source will
automatically be set to the input to which your
iPod is connected.
If you cannot adjust the volume of your Onkyo
component with the DS-A3’s remote controller,
try changing its remote control ID. The default
setting is #1.
Some Onkyo components are set to ID #2 or #3.
•
While pressing and holding down the
[SETUP] button, press one of the following
buttons for more than 3 seconds to set the
ID:
ID #1: PLAYLIST Up [ ] button
ID #2: ALBUM Up [ ] button
ID #3: PLAYLIST Down [ ] button
ID #4: ALBUM Down [ ] button
Notes:
•
This function only works when the OSD
mode is set to Off.
•
To use this function, your iPod must be in
the RI Dock, and the RI Dock must be con-
nected to your amp with both an
cable and an audio cable.
•
•
When you use this function, be sure to set
your amp’s volume control to a suitable
level.
Your amp may take several seconds to
startup, so you might not hear the first
few seconds of the first song/video.
■ Charging Your iPod’s Battery
The RI Dock charges your iPod’s battery while
your iPod is in the RI Dock.
Notes:
•
To charge your iPod battery, the AC
adapter must be plugged into a suitable
wall outlet and connected to the RI
Dock’s DC IN jack.
•
See your iPod’s instruction manual for
more information on battery charging.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the RI Dock—Continued
Using Your Amp’s Remote Controller
The following table shows which buttons on your amp’s remote controller you can use to control
your iPod while it’s in the RI Dock. Be sure to select the appropriate remote mode first, and point
your remote controller at your amp. Note that some buttons may be labelled differently, and some
remote controllers may not have certain buttons.
Remote controller button to use
iPod function
Turn on/off
Play
Description
iPod is turned on and off.
TAPE mode
HDD mode
[STANDBY], [ON]
—
Starts playback on the iPod. If the iPod is not
already on, it’s turned on automatically.
Play [
]
]
Pause
Pause [ ], Stop [
Pause [
Next [
]
Pauses iPod playback.
Next song
[
], [
]
]
Selects the next iPod song.
Restarts the current iPod song. Press it twice to
select the previous song.
Previous song
[
], [
]
Previous [
]
—
Fast forward
Rewind
Fast Forward [
Rewind [
]
Press and hold to fast forward the iPod.
Press and hold to rewind the iPod.
—
]
* To select the next or previous photo in an iPod photo slideshow, use the controls on your iPod photo.
The following functions can be used with some Onkyo amps.
Remote controller button to use
iPod function
Shuffle
Description
TAPE mode
HDD mode
[RANDOM], [PLAY-
MODE], [SHUFFLE]
Sets the iPod’s Shuffle function to: Songs,
Albums, or Off.
[DOLBY MODE]
Sets the iPod’s Repeat function to: One, All, or
Off.
Repeat
[REVERSE MODE]
[REPEAT]
Backlight
REC [
—
]
[DISPLAY], [SCROLL] The iPod’s backlight comes on for 30 seconds.
Next playlist
[PLAYLIST UP]
[PLAYLIST DOWN]
[ALBUM UP]
Selects the next playlist on the iPod.
Selects the previous playlist on the iPod.
Selects the next album on the iPod.
Selects the previous album on the iPod.
Previous
playlist
—
—
—
Next album
Previous
album
[ALBUM DOWN]
* Depending on your amp, some buttons may not work as expected.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
■ There’s no sound
■ The onscreen display doesn’t appear on
your TV
•
•
Make sure your iPod is actually playing.
Make sure your iPod is inserted properly in the RI
Dock.
Make sure your ampis turned on, the correctinput
source is selected, and the volume is turned up.
Make sure the plugs are pushed in all the way.
Make sure the AC adapter is connected to a suit-
able wall outlet and connected to the RI Dock.
•
•
Set the OSD mode to On (see page 10).
Try setting the TV system to PAL or NTSC (see
page 14).
Select the video output mode (composite/compo-
nent) according to the video input on your TV (see
page 10).
•
•
•
•
■ To watch an iPod slideshow or video on
TV:
Set the OSD mode to Off, and use your iPod’s con-
trols or remote controller to select and start the
slideshow or video.
■ The RI Dock’s remote controller doesn’t
control your iPod
•
•
If the RI Dock is placed on top of another compo-
nent, the remote controller’s signal may be
obstructed and the remote controller may not
work reliably. In this case, try repositioning the RI
Dock.
•
•
•
Make sure your iPod is properly inserted in the RI
Dock.
When you use the RI Dock’s remote controller,
point it toward the RI Dock (see page 8).
Some of the remote controllers buttons work dif-
ferently depending on the OSD mode: On or Off
(see page 7).
■ Your amp’s remote controller doesn’t con-
trol your iPod
•
•
Make sure your iPod is properly inserted in the RI
Dock.
If your amp’s remote controller has remote mode
buttons, make sure you’ve selected the right
mode.
•
•
Check the RI Dock’s RI MODE switch setting.
When you use your amp’s remote controller, point
it toward your amp.
•
•
The RI Dock must be connected to your amp with
both an
cable and an audio cable.
Make sure the RI Dock’s RI MODE switch setting
and the remote control mode match this setting.
See your amp’s manual for more information.
If you still can’t control your iPod, start playback by
pressing your iPod’s Play button. Remote opera-
tion should then be possible.
•
Make sure your amp’s remote controller is set to
the correct remote control ID.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power supply:
AC adapter (5 V DC)
Power consumption (iPod not inserted):
North American model: 0.8 W
Other models: 0.8 W
Weight:
0.66 lbs. (300 g)
Dimensions (W x H x D): 4-5/16 x 2-1/8 x 4-7/16 inches
110 x 54 x 112 mm
Connectors:
VIDEO OUT (COMPONENT/VIDEO)
AUDIO OUT L/R
jack
Specifications and features are subject to change
without notice.
In catalogs and on packaging, the letter at the end of
the product name indicates the color. Specifications
and operation are the same regardless of color.
•
•
The operating instructions in this manual apply
to the iPod as of May 2008, and may change with
future upgrades to the iPod software.
The AC adapter supplied with the RI Dock is
designed exclusively for use with the RI Dock. Do
not use it with another device. Likewise, do not
use any other AC adapter with the RI Dock. Doing
so may damage the RI Dock.
•
If there’s any noise when listening to an FM or AM
radio station on your tuner or receiver, try mov-
ing its antenna away from the RI Dock, iPod, and
AC adapter’s cable. In addition, don’t wrap the
AC adapter’s cable around any other cables.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
HOMEPAGE
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
ONKYO CHINA LIMITED
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
Printed in Japan
D0901-2
SN 29344880A
(C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved.
* 2 9 3 4 4 8 8 0 A *
Download from Www.Somanuals.com. All Manuals Search And Download.
|