Onkyo Car Video System DR L50 User Manual

Contents

Before UsingYour DVD Receiver

DVD Receiver

Getting Started

DR-L50

Instruction Manual

Setup

Basic Operation

Advanced Operation

Thank you for purchasing the Onkyo DVD Receiver.

Please read this manual thoroughly before making

connections and turning on the power.

Following the instructions in this manual will enable

you to obtain optimum performance and listening

enjoyment from your new DVD Receiver.

Please retain this manual for future reference.

Other

Download from Www.Somanuals.com. All Manuals Search And Download.

21. Replacement Parts – When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or have

the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock, or other hazards.

22. Safety Check – Upon completion of any service or

repairs to the appliance, ask the service technician to

perform safety checks to determine that the appliance is

in proper operation condition.

FIGURE 1:

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

23. Wall or Ceiling Mounting – The appliance should be

mounted to a wall or ceiling only as recommended by the

manufacturer.

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

24. Heat – The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or

other appliances (including amplifiers) that produce heat.

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

25. Liquid Hazards – The appliance should not be exposed

to dripping or splashing and no objects filled with liquids,

such as vases should be placed on the appliance.

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

S2898A

Precautions

For British model

For U.S. model

Replacement and mounting of an AC plug on the power supply cord

of this unit should be performed only by qualified service personnel.

The laser is covered by a housing which prevents exposure during

operation or maintenance. However, this product is classified as a

Laser Product by CDRH (Center for Devices and Radiological

Health) which is a department of the Food and Drug Administration.

According to their regulations 21 CFR section 1002.30, all

manufactures who sell Laser Products must maintain records of

written communications between the manufacturer, dealers and

customers concerning radiation safety. If you have any complaints

about instructions or explanations affecting the use of this product,

please feel free to write to the address on the back page of this

manual. When you write us, please include the model number and

serial number of your unit.

IMPORTANT

The wires in the mains lead are coloured in accordance with the

following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the terminals

in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal

which is marked with the letter N or coloured black.

In compliance with Federal Regulations, the certification,

identification and the period of manufacture are indicated on the rear

panel.

The wire which is coloured brown must be connected to the terminal

which is marked with the letter L or coloured red.

FCC INFORMATION FOR USER

CAUTION:

The user changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

IMPORTANT

A 5 ampere fuse is fitted in this plug. Should the fuse need to be

replaced, please ensure that the replacement fuse has a rating of 5

amperes and that it is approved by ASTA or BSI to BS1362. Check

for the ASTA mark or the BSI mark on the body of the fuse.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE

SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE

REMOVED AND THE PLUG CUT OFF AND DISPOSED OF

SAFELY.THERE IS A DANGER OF SEVERE ELECTRICAL

SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13

AMPERE SOCKET.

NOTE:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

If in any doubt, please consult a qualified electrician.

For Canadian model

This class B digital apparatus complies with Canadian ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Modèle pour les Canadien

• Consult the dealer or an experienced radio/TV technician for help.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Section 820-40 of the NEC which provides guidelines for

proper grounding and, in particular, specifies that the cable ground

shall be connected to the grounding system of the building, as close

to the point of cable entry as practical.

Sur les modèles dont la fiche est polarisee:

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

7. Location of the unit

DANGER:

• Place the unit in a well-ventilated location.

VISIBLEAND INVISIBLE LASER RADIATION WHEN OPENAND

INTERLOCK FAILED OR DEFEATED. DO NOT STARE INTO

BEAM.

Take special care to provide plenty of ventilation on all sides of

the unit especially when it is placed in an audio rack. If ventilation

is blocked, the unit may overheat and malfunction.

• Do not expose the unit to direct sunlight or heating units as the

unit's internal temperature may rise and shorten the life of the

pickup.

• Avoid damp and dusty places and places directly affected by

vibrations from the speakers. In particular, avoid placing the unit

on or above one of the speakers.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR

ADJUSTMENTS OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

• Be sure the unit is placed in a horizontal position. Never place it

on its side or on a slanted surface as it may malfunction.

• When you place the unit near a TV, radio, or VCR, the playback

picture may become poor and the sound may be distorted. In

this case, place the unit away from the TV, radio, or VCR.

This unit contains a semiconductor laser system and is classified

as a “CLASS 1 LASER PRODUCT.” So, to use this model properly,

read this Instruction Manual carefully. In case of any trouble,

please contact the store where you purchased the unit. To prevent

being exposed to the laser beam, do not try to open the enclosure.

8. Care

From time to time you should wipe the front and rear panels and

the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth

in a weak solution of mild detergent and water, wring it out dry, and

wipe off the dirt. Following this, dry immediately with a clean cloth.

Do not use rough material, thinners, alcohol or other chemical

solvents or cloths since these could damage the finish or remove

the panel lettering.

For European model

9. Notes on Handling

• When shipping the unit, use the original shipping carton and

packing materials. For maximum protection, repack the unit as

it was originally packed at the factory.

• Do not use volatile liquids, such as insect spray, near the unit.

Do not leave rubber or plastic products in contact with the unit

for a long time. They will leave marks on the finish.

This label on the rear panel states that:

1. This unit is a CLASS 1 LASER PRODUCT and employs a

laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove the

cover. Refer servicing to qualified personnel.

• The top and rear panels of the unit may become warm after a

long period of use.This is not a malfunction.

• When the unit is not in use, be sure to remove the disc and turn

1. Regional Restriction Codes (Region Number)

Regional restriction codes are built into DVD Receivers and DVD

videos for each sales region. If the regional code of the DVD

Receiver does not match one of the regional codes on the DVD

video, playback is not possible.

off the power.

• If you do not use the unit for a long period, the unit may not

function properly in the future. Turn on and use the unit

occasionally.

The regional number can be found on the rear panel of the DVD

10. To Obtain a Clear Picture

Receiver. (e.g.

for Region 2)

The unit is a high technology, precision device. If the optical pick-

up lens and disc drive parts are dirty or worn down, the picture

quality becomes poor. To obtain a clear picture, we recommend

regular inspection and maintenance (cleaning or parts

replacement) every 1,000 hours of use depending on the operating

environment. For details, contact your nearest dealer.

2. About This Manual

This manual explains the basic procedures for operating the DVD

Receiver. Some DVD videos do not support the full potential of the

DVD technology. Your DVD Receiver may therefore not respond

to all operating commands. Refer to instruction notes on discs.

A “

” mark may appear on the TV screen during operation. It

11. Notes on Moisture Condensation

means that the operation is not permitted by the DVD Receiver or

the disc.

Moisture condensation damages the unit.

Please read the following carefully.

3. Recording Copyright

• What is moisture condensation?

Recording of copyrighted material for other than personal use is

illegal without permission of the copyright holder.

Moisture condensation occurs, for example, when you pour a

cold drink into a glass on a warm day. Drops of water form on

the outside of the glass. In the same way, moisture may condense

on the optical pick-up lens inside the unit, one of the most crucial

internal parts of the unit.

4. AC Fuse

The fuse is located inside the chassis and is not user-serviceable.

If power does not come on, contact your Onkyo authorized service

center.

• Moisture condensation occurs in the following cases.

– When you bring the unit directly from a cold place to a warm

place.

– When you use the unit in a room where you just turned on the

heater, or a place where the cold wind from the air conditioner

directly hits the unit.

– In summer, when you use the unit in a hot and humid place

just after you move the unit from an air conditioned room.

– When you use the unit in a humid place.

5. Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ

THE FOLLOWING SECTION CAREFULLY.

The voltage of the available power supply differs according to

country or region. Be sure that the power supply voltage of the

area where the unit will be used meets the required voltage (AC

120V 60Hz or AC 230-240V 50Hz) written on the rear panel.

• Do not use the unit when moisture condensation may occur.

If you use the unit in such a situation, it may damage discs and

internal parts. Remove the disc, connect the power cord of the

unit to the wall outlet, turn on the unit, and leave it for two or

three hours. After a few hours, the unit will have warmed up and

evaporated any moisture. Keep the unit connected to the wall

outlet and moisture condensation will seldom occur.

6. Do not touch the unit with wet hands

Do not handle the unit or power cord when your hands are wet or

damp. If water or any other liquid enters the case, take the unit to

an authorized service center for inspection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Important Safety Instructions/Precautions/Table of Contents ......................... 2/3/5

Getting Started

Features ................................................................................................................ 6

Supplied Accessories ............................................................................................ 7

Notes on Discs ...................................................................................................... 8

Index to Parts and Controls ................................................................................ 10

Preparing the Remote Controller ........................................................................ 17

Connecting to a TV (Other than European model).............................................. 18

Connecting to a TV (European model)................................................................ 19

Connecting Speakers.......................................................................................... 20

Positioning Speakers .......................................................................................... 21

Connecting to Audio/Video Equipment................................................................ 22

z Connection for the Onkyo MD Recorder or Cassette Tape Deck ................. 23

Making Antenna Connections ............................................................................. 24

Setup

Connecting the Power/Turning on the DVD Receiver ......................................... 26

Speaker Setup .................................................................................................... 28

Basic Operation

Getting Started Using Your DVD Receiver.......................................................... 31

Listening to the Radio ......................................................................................... 37

Playing the Connected Source ........................................................................... 40

Various Functions Common to all the Sources ................................................... 42

Using the Timer Functions .................................................................................. 43

Enjoying the Sound Effects ................................................................................. 48

Advanced Operation

Locating a Specific Title/Folder/Chapter/Track/Location ..................................... 54

Repeat Play ........................................................................................................ 56

Still Frame/Slow Play .......................................................................................... 57

Playing in a Favourite Order ............................................................................... 58

Random Play ...................................................................................................... 62

Selecting the Audio/Subtitle Language ............................................................... 63

Continuing Playback from a Specified Location (Last Memory) ......................... 64

Condition Memory/Selecting the Camera Angle ................................................. 65

Viewing Disc Information..................................................................................... 66

Customizing the Function Settings ..................................................................... 68

Recording Using the Connected Equipment ....................................................... 82

Controlling a TV connected to the DVD Receiver ............................................... 83

Other

Troubleshooting .................................................................................................. 84

Specifications ...................................................................................................... 87

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

“DTS” and “DTS Digital Surround” are trademarks of

Digital Theater Systems, Inc.

I Receiver Features

** Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are

trademarks of Dolby Laboratories. Confidential

25 watts per channel into 6 ohms (FTC)

21 watts per channel into 6 ohms (DIN)

26 watts per channel into 6 ohms (EIAJ)

96 kHz/24-Bit DAC System

DTS* & Dolby** Digital Decoders

Acoustic Control

*** “Theater-Dimensional” is a trademark of Onkyo

Corporation.

1 Digital Input/1 Output

Subwoofer Preout

2 Audio Inputs/1 Output

1 S-Video Input

Theater-Dimensional***

30 FM/AM Random Presets

IPM (Intelligent Power Management)

Sleep Timer

Timer Play

I DVD/CD Player Features

DTS, Dolby Digital, and PCM Compatible

Component-Video Output (Other than European model)

SCART connector (European model)

Progressive Scan (Other than European model)

27 MHz/10-Bit Video DAC

Plays DVDs, MP3 CDs, CD-Rs, CD-RWs, Video CDs and

Audio CDs

High-Resolution On-screen Display

Program Memory Playback

Auto Last Play

Dual-Wavelength Optical Pickup

Sand-Blasted Aluminum Front Panel

I Other Features

Full Function z-compatible Remote Control

Preprogrammed Remote Control

Declaration of Conformity

Memory Preservation

We,

ONKYO EUROPE

ELECTRONICS GmbH

INDUSTRIESTRASSE 20

82110 GERMERING,

GERMANY

This unit does not require memory preservation batteries.

A built-in memory power backup system preserves the

contents of memory during power failures and even when

the power cord is unplugged.

The power cord must be plugged in order to charge the

backups system. The memory preservation period after

the unit has been turned off varies depending on climate

and placement of the unit. On average, memory contents

are protected over a period of a few weeks after the time

the unit has been turned off. This period is shorter when

the unit is exposed to a very humid climate.

declare in own responsibility, that the ONKYO product described

in this instruction manual is in compliance with the corresponding

technical standards such as EN60065, EN55013, EN55020 and

EN61000-3-2, -3-3.

GERMERING, GERMANY

I. MORI

ONKYO EUROPE ELECTRONICS GmbH

Download from Www.Somanuals.com. All Manuals Search And Download.

Supplied Accessories

Make sure your box contains everything listed below.

If any pieces are missing, contact your nearest Onkyo service station.

The number of accessories is indicated in brackets.

Remote controller (RC-505M) [1]

Speaker Label [1]

Speaker Cable

Batteries (size AA/R6/UM3) [2]

AM loop antenna [1]

FM antenna [1]

(South American models)

(Other models)

(European models)

(Other models)

Audio/video

connection cable [1]

S video connection

cable [1]

SCART cable [1]

The alphabet displayed at the end of the product name

found in catalogs and on the package represents the

color of this DVD receiver. Though the color varies, the

specifications and operations are the same.

FM outdoor antenna adapter [1]*

* Not supplied for European models

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes on Discs

This section shows you how to handle, clean, and store discs.

About VIDEO CDs

Playable Discs

This DVD Receiver supports VIDEO CDs equipped with the

PBC (Version 2.0) function. (PBC is the abbreviation of

Playback Control.)

You can enjoy two playback variations depending on the type

of disc.

This DVD Receiver can playback the following discs.

Disc mark

• VIDEO CD not equipped with PBC function (Version 1.1)

DVD videos

VIDEO CDs

Sound and movies can be played on this DVD Receiver in

the same way as an audio CD.

• VIDEO CD equipped with PBC function (Version 2.0)

In addition to operation of the VIDEO CD not equipped with

the PBC function, you can enjoy playback with interactive

software and search function using the menu displayed on

the TV screen (Menu Playback). Some of the functions

described in this Instruction Manual may not work with some

discs.

Audio CDs

MP3 compatibility information

*¹This unit can play CD-R and CD-RW discs recorded in CD

Audio or Video CD format, or with MP3 audio files.

However, there may be some discs that cannot be played

back with this unit. The causes of this impossibility include

incompletion of disc finalization and the recording

characteristics of the recorder as well as the properties,

damage or stain of the disc in use and stain or

• The CD-ROM must be ISO9660 compatible.

• Files should be MPEG1 Audio Layer 3 format, 44.1 or

48kHz, fixed bit-rate. Incompatible files will not play and

“UNPLAYABLE” will be displayed.

• This DVD Receiver is not compatible with variable bit-rate

(VBR) files. Be sure to make MP3 CD with fixed bit-rate

setting.

• This system only plays tracks that are named with the file

condensation on the pickup lens of this unit. For details,

extension “.mp3” or “.MP3”.

please refer to the instruction manual of the recorder.

• This system is not compatible with multi-session discs. If

you try an play a multi-session disc, only the first session

will be played.

• Use CD-R or CD-RW media for recording your MP3 files.

The disc must be finalized in order to play.

• Audio encoded at 128kbps should sound close to regular

audio CD quality. Although this system will play lower bit-

rate MP3 tracks, the sound quality becomes noticeably

worse at lower bit-rates.

• Only the first 8 characters of folder and track names

(excluding the “.mp3” extension) are displayed.

• This system can recognize a maximum of 250 folders and

250 tracks. Discs containing more than 250 folders or tracks

will not play.

• You cannot playback discs other than those listed above.

• You cannot play discs such as DVD-RAM, DVD-RW, DVD-

Audio, Photo CD, CD-G etc., even if the marks in the

above table are labeled on those discs.

• This DVD Receiver uses the PAL/NTSC color system, and

cannot playback DVD videos recorded in any other color

system (SECAM, etc.).

• Avoid using heart-shaped or octagonal discs. Playing

irregularly shaped discs may damage the internal

mechanism of the DVD Receiver.

Notes on Copyright

• Do not use discs that have residue from adhesive tape,

rental discs that have peeling labels, or discs that have

custom labels or stickers. Otherwise, you may not be able

to eject the discs or the DVD Receiver may become

inoperative.

It is forbidden by law to copy, broadcast, show, broadcast on

cable, play in public, and rent copyrighted material without

permission.

DVD videos are copy protected, and any recordings made from

these discs will be distorted.

This product incorporates copyright protection technology that is

protected by method claims of certain U.S. patents and other

intellectual property rights owned by Macrovision Corporation

and other rights owners. Use of this copyright protection

technology must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses only unless

otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

Download from Www.Somanuals.com. All Manuals Search And Download.

Handling Discs

Differences in Disc Composition

• Do not touch the playback side of the disc.

I DVD

All discs are divided up into smaller, more manageable

sections so that you can find specific content more easily.

DVDs are divided into one or more titles. Each title may be

further divided into several chapters. Occassionally, a chapter

may contain index points, effectively dividing the chapter up

into several parts, too.

Playback side

• Do not attach paper or tape to discs.

Title 1

Chapter 2

Title 2

Chapter 2

Chapter 1

Cleaning Discs

DVD

• Fingerprints and dust on the disc cause picture and sound

deterioration. Wipe the disc from the center outwards with a

soft cloth. Always keep the disc clean.

I Video CD/CD

Video CDs and CDs are divided into a number of tracks. In

rare cases, a track may contain a number of index points,

effectively dividing the track up into several parts.

Track 2

Track 1

Track 3

Track 4

• If you cannot wipe off the dust with a soft cloth, wipe the disc

lightly with a slightly moistened soft cloth and finish with a

dry cloth.

• Do not use any type of solvent such as thinner, benzine,

commercially available cleaners or antistatic spray for vinyl

LPs. It may damage the disc.

Video CD

Track 2

Track 1

Track 3

Track 4

Track 5

Storing Discs

• Do not store discs in a place subject to direct sunlight or

near heat sources.

• Do not store discs in places subject to moisture and dust

such as a bathroom or near a humidifier.

• Store discs vertically in a case. Stacking or placing objects

on discs outside of their case may cause warping.

I MP3

MP3 (MPEG1 Audio Layer 3) is a compressed audio file

format. Files are recognized by their file extension “.mp3” or

“.MP3”. Folders that contain MP3 files are automatically

numbered F_001, F_002, etc. Tracks within folders are

automatically numbered T_001, T_002, etc.

Folder 1

Track 2

Folder 2

Track 1

Track 3

Track 1

Track 2

MP3

Download from Www.Somanuals.com. All Manuals Search And Download.

Index to Parts and Controls

For operational instructions, refer to the page indicated in brackets.

IFront panel

2 34

PROGRESSIVE SCAN

Theater-Dimensional

IPM

0 - = ~

@ # $

% ^

1 STANDBY/ON button, ON, STANDBY indicators [26]

When STANDBY/ON button is pressed to ON, the DVD Receiver

turns on. The STANDBY indicator turns off, and the ON indicator

and the display lights up. Pressing the button again returns the

DVD Receiver to the standby state. This state turns off the display,

disables control functions.

~ £ button [31, 35, 36]

Press to start or resume playback.

! 4/¢,TUNING/PRESET 2/3 buttons [35, 37, 39]

Press to go back or advance to previous chapters/tracks. Also, use

these buttons to change the tuner frequency.

2 Progressive Scan indicator (other than European models

only) [71]

@ PRESET MEMORY button [37-40]

Press to assign the radio station that is currently tuned in to a

preset channel or delete a previously preset station.

Lights up when the DVD Receiver is set to progressive-scan video.

3 IPM (Intelligent Power Management) indicator [27]

# STEREO/Theater-Dimensional button [50, 51]

Press to switch the listening mode between “STEREO” and

“THEATER-DIMENSIONAL”.

Lights up when the IPM function is active.

4 Theater-Dimensional indicator [50]

Lights up while in the Theater-Dimensional mode.

$ SURROUND MODE button [51]

Press to select a surround mode.

5 Display [11, 42]

% INPUT 2/3 buttons [37, 39, 40]

6 Remote control sensor [17]

Point the remote control toward the remote sensor to operate the

DVD Receiver.

Press to select the input source other than DVD.

^ ACOUSTIC CONTROL button and indicator [53]

Press to change the acoustic mode to boost the super bass/high

frequency sounds. When acoustic control mode is on the

“A.CTRL 1 or 2” indicator lights.

7 MASTER VOLUME control [42]

The MASTER VOLUME dial is used to control the volume level.

8 PHONES jack [42]

This is a standard stereo jack for connecting stereo headphones.

9 Disc tray [31, 36]

When loading a disc, place discs in the disc tray with the label side

facing up.

0 0 button [31, 36]

Press to open and close the disc tray.

- 8 button [31]

Press to pause playback. Press again to resume playback.

= 7 button [36]

Press to stop playback. Pressing once enables playback to resume

from a point shortly before the location where it was stopped.

Pressing twice causes the disc to return to the beginning of the

disc when playback starts again.

Download from Www.Somanuals.com. All Manuals Search And Download.

IDisplay

12 3 4

5 6

8 9 0 -

~ !

1 Multipurpose display

9 LAST indicator [64]

Lights up when a disc which contains a memorized Last Memory

point is loaded.

2 TITLE, CHP indicators [54, 58, 66, 67]

Indicate display mode of the current title or chapter of DVD.

0 REMAIN indicator [66, 67]

Lights up when time remaining is displayed.

3 Inserted disc indicator [31]

Indicates the type of current disc that is loaded.

- MUTING indicator [42]

Flashes when the mute function is active.

4 £, 8 indicators [31]

Lights up in play or pause mode.

= RDS indicator (European models only) [39]

Lights up when an RDS station is received.

5 TIMER indicator [44]

Lights up when the respective timer is set.

~ 3¶2, AUTO, FM STEREO indicators [37]

Indicate the reception mode.

6 RPT indicator [56]

Illuminates during repeat playback. Also RPT indicator illuminates

during A-B repeat playback.

! TRACK indicator [54, 58, 66, 67]

Lights up when the current track of Video CD or CD is displayed.

7 Source/Listening mode indicators [40, 49, 51]

One of the source indicators lights to show the format of the current

source.

8 SLEEP indicator [44]

Lights up when the sleep timer is active.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index to Parts and Controls

IRemote controller

This is a multi-function remote controller, so many of the

buttons have two or more functions.To use all of these

functions, proceed as follows:

Press MODE RECEIVER first to use these buttons.

1 To control this unit or a connected Onkyo MD Recorder,

CD Recorder or Cassette Tape Deck, first press the

MODE RECEIVER button.

MODE RECEIVER

2 To control additional functions, press the SHIFT button,

then one of the numeric buttons (0-9) within 10 seconds.

3 To make settings or control a TV first press the MODE

TV/SETUP button.To control the TV, you must first Pre-

Program theTV signal. For Programming instructions

see page 83.

MODE

RECEIVER TV/SETUP

ACOUSTIC

STANDBY

CONTROL

PROGRAM

CLEAR

INPUT SELECTOR

LAST M

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

(

IPM

D SETUP

RANDOM

DOWN

TIMER

SHIFT

)

-- ---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

™

TUNING

TUNER PRESET

∞

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

•

Download from Www.Somanuals.com. All Manuals Search And Download.

1 ON button [26, 32, 68]

$ Number buttons (1-9, +10, 0) [31, 53, 58-61, 83]

Use to perform direct title/folder and chapter/track searches, and to

input numerical values.

Turns on the DVD Receiver.

2 MODE RECEIVER, MODE TV/SETUP buttons [15]

% ACOUSTIC CONTROL button [53]

Press to change the acoustic mode to boost the super bass/high

frequency sounds.

For switching the button functions.

3 STANDBY button [36, 45, 47, 64]

Put the DVD Receiver in standby.

^ SEARCH button [54]

Press to perform a title/folder, chapter/track or elapsed time search.

4 INPUT SELECTOR 2/3 buttons [37, 39-41]

Press to select the input source.

& PROGRAM button [58-61]

5 +10/--/--- button [41, 83]

You can program titles, chapters or tracks to play back in desired

Press to input numbers over 10.

order. Programs can be a maximum of 24 steps.

6 TOP MENU button [34, 54]

* CLEAR button [55, 56, 61, 63-65]

Press to call up the top menu programmed on the DVD. Depending

on the DVD, the top menu may be identical to the DVD menu.

Works in conjunction with a number of player functions. Use to

cancel repeat and random playback, and to edit programs.

7 Cursor (2/3/5/∞) [31, 32, 43-47, 58-61, 68, 81]

( SHIFT button [14, 50, 51, 53, 62-65, 81]

Use to move through the options on menu screens.

Press to switch the button function.

8 RETURN button [34, 68, 77, 79, 80]

Use to go one menu back (current settings are maintained). Use

RETURN when you do not want to change the option setting in a

menu.

) TIMER button [43-47]

Press to activate a timer function or to set a timer program.

_ MENU button [34, 55, 63, 65]

Use to display or close the DVD menu or MP3 Navigator screen.

9 REPEAT button [56]

Use to set the repeat mode.

+ DVD SETUP button [32, 68, 81]

Press when the DVD Receiver is in either play or stop mode to

open and close the Setup screen.

0 A-B button [56]

Press at the beginning and end of the section you want to repeat or

to mark a location you want to return to.

¡ ENTER button [31, 32, 43-47, 58-62, 81]

Press to choose a selected item or function.

- 7 button [36]

Press to stop playback (DVD). Pressing once enables playback to

resume from a point shortly before the location where it was

stopped. Pressing twice causes the disc to return to the beginning

of the disc when playback starts again.

™ STEP/SLOW +/– buttons [57]

Press STEP/SLOW +/– during playback to view still frame. Press

and hold STEP/SLOW +/– during playback to view slow playback.

In still frame, press STEP/SLOW + to advance DVDs and Video

CDs frame by frame and STEP/SLOW – to back up a few frames at

a time (DVD only).

= 1/¡ buttons [35, 37]

During playback of DVD and Video CD, press ¡ to perform fast

forward scanning or 1 to perform fast reverse scanning of DVD

and Video CD. When a CD or MP3 is loaded, audio scanning is

performed. When AM or FM is selected, press for tuning.

£ 8 button [31, 34, 57]

Press to pause disc playback.

¢ £ button [31, 34, 36, 54, 56-60, 62]

~ MODE button [37, 41]

Press to start or resume playback.

For FM input, press to switch between FM Stereo auto and mono.

For MD or CD Recorder input, press to select play mode (Random

or Memory).

∞ 4/¢ buttons [35, 37, 39, 62]

During playback of DVD, CD and Video CD, press 4 to go back

to a previous chapter/track and ¢ to advance to the next chapter/

track. When AM or FM is selected, press to select preset channels.

! MD/CDR/TAPE buttons [41]

Press to operate Onkyo MD Recorder, CD Recorder or Tape Deck.

™/8: Press to pause playback of a disc or to reverse playback of

a cassette tape.

§ DISPLAY button [29, 38, 43, 65, 66]

Press to change the information being displayed.

Press to stop playback.

Press to start playback.

£:

¶ CLOCK button [43]

Press to view the clock display.

@ SLEEP button [44]

For setting the sleep timer.

• DIMMER button [42]

For adjusting the brightness of the front display.

# MUTING button [42]

Activates the mute function.

ª VOLUME 5/∞ buttons [42]

For adjusting the volume.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index to Parts and Controls

Press SHIFT to use the gray buttons

1 LAST M button [64]

You can resume DVD or Video CD playback from the point you last

watched even if the disc is removed from the DVD receiver. Press

LAST M during playback to set a Last Memory point. When you want

to resume playback of that disc, press LAST M in the stop mode and

playback starts from the memorized point. Last Memory locations

can be stored for up to 5 DVDs and 1 Video CD.

2 COND. M button [65]

You can store in memory the settings for up to 15 DVDs. Press

COND. M during DVD playback to memorize the settings.

3 AUDIO button [63]

Press repeatedly to select one of the audio languages programmed

on a DVD.

MODE

RECEIVER TV/SETUP

For Video CD and MP3, each press changes the audio output as

follows.

ACOUSTIC

STANDBY

CONTROL

→ Stereo → 1/L(Left) → 2/R(Right)

INPUT SELECTOR

4 ANGLE button [65]

LAST M

COND.M

FUNC.M

Some DVDs are recorded with various camera angle playback

options. Press ANGLE repeatedly to display different camera

angles.

SP SETUP TEST TONE CH SEL

AUDIO

PROGRAM

CLEAR

TIMER

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

5 LATE NIGHT button [53]

D/ST

SURROUND

Press to change the late night setting.

IPM

D SETUP

DOWN

RANDOM

6 T-D/ST button [50, 51]

SHIFT

Press to switch the listening mode between “STEREO” and

“THEATER-DIMENSIONAL”.

-- ---

TOP MENU

SHIFT

TV VOL

7 RANDOM button [62]

POWER

INPUT

Press to play chapters/tracks in random order.

TV CH

DVD

SETUP

8 FUNC. M button [81]

RETURN

You can store in memory up to 5 settings. Press FUNC. M to

memorize and recall the settings.

TV VOL

TV MUTING

REPEAT

STEP/SLOW

9 SUBTITLE button [63]

Press repeatedly to select one of the subtitle languages

programmed on DVD or to turn the subtitles off.

0 SURROUND button [51]

TUNING

TUNER PRESET

Press to select the surround mode.

MODE

MD/CDR/TAPE

Note

This unit automatically returns to RECEIVER mode 10 seconds after

performing a SHIFT button operation (even if this unit was previously in

TV/SETUP mode).

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Download from Www.Somanuals.com. All Manuals Search And Download.

Press MODE TV/SETUP to use the gray buttons

Other buttons have the same functions as when MODE RECEIVER

button is pressed.

1 SP SETUP button [28]

Press to select the optimum speaker configuration.

2 TEST TONE button [30, 52]

Outputs a test tone for setting speaker levels.

3 SW MODE button [28]

Press to select the subwoofer mode.

MODE TV/SETUP

4 DISTANCE button [29]

For setting the distances for each speaker.

5 IPM (Intelligent Power Management) button [27]

Activates the IPM function.

MODE

RECEIVER TV/SETUP

6 T-D SETUP [50]

For setting the T-D parameters.

ACOUSTIC

STANDBY

CONTROL

PROGRAM

CLEAR

INPUT SELECTOR

7 CH SEL button [29, 30, 52]

Selects a speaker for changing the speaker output level.

LAST M

COND.M

FUNC.M

8 UP/DOWN buttons [29, 30, 50, 52]

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

Press to adjust the value.

SW MODE DISTANCE

LATE NIGHT

The following buttons must be pre-programmed (refer to

page 83)

D/ST

SURROUND

IPM

D SETUP

RANDOM

DOWN

TIMER

9 TV POWER button

SHIFT

Turns on the TV.

-- ---

TOP MENU

TV VOL

0 TV MUTING button

POWER

INPUT

Mutes the TV volume.

TV CH

- TV CH +/– buttons

DVD

SETUP

For selecting a TV channel.

RETURN

= TV VOL +/– buttons

TV VOL

TV MUTING

REPEAT

For adjusting the TV volume.

STEP/SLOW

~ TV INPUT button

Press to select TV input.

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Download from Www.Somanuals.com. All Manuals Search And Download.

Index to Parts and Controls

IRear panel

Other than European models

SURROUND

SPEAKERS

ANTENNA

FRONT SPEAKERS

CENTER

AUDIO^PREOUT

AC INLET

REMOTE

ANTENNA

CONTROL

FM 75

OUT

MD/CDR/TAPE

SUB

WOOFER TV/LINE

DIGITAL

VIDEO OUTPUT

OPTICAL

OUT

VIDEO

COMPONENT

European models

Shapes of jacks vary depending on the area in which it was

purchased.

1 SUB WOOFER PRE OUT jack [20, 21]

ANTENNA

REMOTE

CONTROL

This terminal is for connecting an active subwoofer.

ANTENNA

FM 75

OUT

TV/LINE

TAL

MD/CDR/TAPE

VIDEO OUTPUT

2 TV/LINE IN jacks [18,19, 22]

AV CONNECTOR

This terminal is for connecting audio output terminals of TV, VCR or

other video equipment.

VIDEO

3 MD/CDR/TAPE IN/OUT jacks [22]

These terminals are for connecting to the recording input and

output terminals of an MD recorder, CD recorder or tape deck.

4 z REMOTE CONTROL connector [23]

Connect the Onkyo components that have z connectors such as

a MD recorder, and cassette tape deck using the z cables

provided with them. When these components are interconnected,

they can be controlled from the remote controller provided with the

DVD Receiver.

9 VIDEO OUTPUT (VIDEO/S VIDEO/COMPONENT) jacks

[18]

The monitor output includes RCA type, S video and component

configurations. This output is for connecting television monitor or

projector.

After connecting the z connectors, check the operation of the

remote controller buttons for use in controlling other components.

5 ANTENNA terminals [24, 25]

These terminals are for connecting the FM antenna and AM

antenna.

(European models)

0 VIDEO OUTPUT (VIDEO/S VIDEO) jacks [19]

The monitor output includes RCA type and S video. This output is

for connecting television monitor or projector.

6 FRONT SPEAKERS, CENTER SPEAKER and SURROUND

SPEAKERS terminals [21]

Speaker terminals are provided for the front left, front right, center,

surround left and surround right speakers. Speaker outputs are

compatible with banana plug connectors.

- AV CONNECTOR terminal [19]

Use a 21-pin SCART cable to connect to a TV or monitor

compatible with this type of connection. Both audio (2 channel

stereo) and video (Video, S-video, and RGB) signals are output

from the AV CONNECTOR.

7 AC INLET [26]

Connect supplied AC power cord to this terminal.

8 DIGITAL OPTICAL IN/OUT jacks [18, 19, 22]

These are the digital audio input and output jacks. The digital input

works in combination with the analog TV/LINE IN jacks. Connect

the digital output from your TV or satellite tuner (MD player, etc.) to

DIGITAL OPTICAL IN. Set the INPUT SELECTOR to TV/LINE IN to

play the digital sound. Connect the DIGITAL OPTICAL OUT to a

digital recording device (MD recorder, CD recorder, etc.). Do not

connect the DIGITAL OPTICAL OUT if the digital output from the

same component is connected to the DIGITAL OPTICAL IN.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparing the Remote Controller

Inserting the Batteries

Pointing the remote controller in the

right direction

Detach the battery cover.

Point the remote controller toward the remote control

sensor.

Remote control sensor

Insert the two size AA/R6/UM3 batteries.

Be sure to match the + and – ends of the batteries with

the diagram inside the battery compartment.

30˚

Attach the battery cover.

Notes

• Place the unit away from strong light such as direct sunlight or

inverted fluorescent light which can prevent proper operation of

the remote controller.

• Using another remote controller of the same type in the same

room or using the unit near equipment which uses infrared rays

may cause operational interference.

• Do not put any object (such as a book) on the remote controller.

The buttons of the remote controller may be pressed by mistake

and drain the batteries.

• Make sure the audio rack doors do not have colored glass.

Placing the unit behind such doors may prevent proper remote

controller operation.

Notes

• Do not mix new batteries with old batteries or different kinds of

batteries.

• To avoid corrosion, remove the batteries if the remote controller

is not to be used for a long time.

• Remove dead batteries immediately to avoid damage from

corrosion. If the remote controller does not operate smoothly,

replace both batteries at the same time.

• The life of the supplied batteries is about six months but this

varies depending on usage.

• If there is any obstacle between the remote controller and the

remote control sensor, the remote controller will not operate.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a TV (Other than European model)

Incomplete

Before connecting

• Connect the plugs securely.

• Note that one audio/video connection

cable and one S video connection cable

are supplied.

• Refer also to the instruction manual of the TV.

• When you connect the DVD Receiver to the TV, be sure to turn

off the power and unplug both the units from the plugs before

making any connections.

• Connect the DVD Receiver to the TV directly. If you connect the

DVD Receiver to a VCR, TV/VCR combination, or video selector,

the playback picture may be distorted as DVD videos are copy

protected.

Insert completely

I Connecting to a TV (or projector)

Notes

• Actual labels for component video inputs may vary depending

on the TV manufacturer (ex. Y/CB/CR, Y/B-Y/R-Y, etc.).

• In some TVs, the color levels of the playback picture may be

reduced slightly or the tint may change. In such a case, adjust

the TV for optimum performance.

Using the supplied audio/video connection cable, make

audio connections from the TV/LINE IN L and R jacks to

the corresponding audio output jacks on the TV. In the

same manner, make video connections from the VIDEO

OUTPUT “VIDEO” jack to the corresponding video input

jack on the TV.

If your TV has a S video input jack and/or component video

input jacks, make S video connection to the S VIDEO jack

using supplied S video connection cable and/or make

component video connection to the COMPONENT jacks

using component video connection cable (not supplied).

These connections allow you to enjoy higher quality picture

playback. You can switch between [S1] and [S2] S-video

output from the Setup menu on page 71.

Video

(Yellow)

L (White)

TV or projector

Audio/video connection cable

DIGITAL

OUT

OPTICAL

R (Red)

AUDIO

OUT

VIDEO S VIDEO

COMPONENT VIDEO IN

S video connection cable

Use the DIGITAL

OPTICAL IN jack in

Optical fiber cable

combination with the TV/

LINE IN jack. When you

use the Input selector to

select TV/LINE IN,

DIGITAL OPTICAL IN is

also activated. When both

a digital signal and an

analog signal are input,

the digital signal takes

precedence.

Component video

connection cable

Signal flow

SURROUND

ANTENNA

FRONT SPEAKERS

CENTER

SPEAKERS

AUDIO^PREOUT

AC INLET

REMOTE

CONTROL

FM 75

DO NOT connect the

power cord at this time.

OUT

MD/CDR/TAPE

SUB

WOOFER TV/LINE

DIGITAL

VIDEO OUTPUT

OPTICAL

OUT

VIDEO

COMPONENT

See “Turning the unit on/off with the TV’s power switch — IPM function” on page 27 for Inteligent Power Management (IPM) function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to a TV (European model)

• Connect the plugs securely.

Before connecting

Incomplete

• Refer also to the instruction manual of the TV.

• When you connect the DVD Receiver to the TV, be sure to turn

off the power and unplug both the units from the plugs before

making any connections.

• Connect the DVD Receiver to the TV directly. If you connect the

DVD Receiver to a VCR, TV/VCR combination, or video selector,

the playback picture may be distorted as DVD videos are copy

protected.

Insert completely

I Connecting to a TV Using the SCART Cable

Connect the DVD Receiver and your TV using the supplied SCART cable.

If the TV is compatible with S video signals

After completing the steps on page 19, set “Video Out” to “S-Video” using the menu

explained in “Customizing the Function Settings” starting from page 68. See page 71 for

direct information.

If an RGB monitor is connected to the DVD Receiver

After completing the steps on page 19, set “Video Out” to “RGB” using the menu explained

in “Customizing the Function Settings” starting from page 68. See page 71 for direct

information.

TV or projector

CONNECTOR

SCART cable

To AV CONNECTOR

input terminal

SURROUND

SPEAKERS

ANTENNA

FRONT SPEAKERS

AUDIO^PREOUT

AC INLET

REMOTE

CONTROL

FM 75

DO NOT connect the

power cord at this time.

OUT

MD/CDR/TAPE

VIDEO OUTPUT

SUB

WOOFER TV/LINE

DIGITAL

AV CONNECTOR

OPTICAL

OUT

VIDEO

See “Turning the unit on/off with the TV’s power

switch — IPM function” on page 27 for Intelligent

Power Management (IPM) function.

Use the DIGITAL OPTICAL

IN jack in combination with

the TV/LINE IN jack. When

you use the Input selector

to select TV/LINE IN,

AUDIO

OUT

VIDEO

TV or projector

DIGITAL OPTICAL IN is

S VIDEO

also activated. When both a

digital signal and an analog

signal are input, the digital

signal takes precedence.

DIGITAL

OUT

OPTICAL

Video

(Yellow)

L (White)

R (Red)

Audio/video

connection cable

I Connecting to a TV using the Audio/Video

connection cable or S video connection cable

If the TV or monitor does not has an AV CONNECTOR input

terminal, make video connection using audio/video connection

cable.

If your TV has an S video input jack, make the S video

connection. The S video connection will provide highter quality

picture playback. You can switch between [S1] and [S2] S-video

output from the Setup menu on page 71.

S video connection cable

Optical fiber cable

Signal flow

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Speakers

Before connecting

• Refer also to the instruction manuals of the speakers.

• This DVD Receiver is designed to reproduce optimum sound

quality when speakers with the impedances specified below are

connected. Please check the following information and choose

speakers with appropriate impedances for the connections.

Front speakers: 6 ohms min. per speaker

Center speaker: 6 ohms min.

Surround Speakers : 6 ohms min. per speaker

• To prevent damage to circuits, never short-

circuit the positive (+) and negative (–)

speaker wires.

• Do not connect the speaker cable to the L

and R connectors at the same time and do

not connect more than one speaker to the

same speaker connectors.

Connecting to SPEAKERS

How to connect to the speaker connectors

10 mm

NO!

–

Strip 10 mm from

the end of each

cable, then twist

the exposed

Press and hold

the lever.

Insert the stripped

end of the cord.

By releasing the

lever, the lever is

replaced.

wires tightly.

Front (R)

Center

Front (L)

Active

subwoofer

– +

SURROUND

SPEAKERS

ANTENNA

FRONT SPEAKERS

AUDIO^PREOUT

AC INLET

CENTER

REMOTE

CONTROL

FM 75

OUT

MD/CDR/TAPE

VIDEO OUTPUT

SUB

WOOFER TV/LINE

DIGITAL

AV CONNECTOR

OPTICAL

OUT

VIDEO

DO NOT connect the

power cord at this time.

Surround (R)

Surround (L)

– +

Download from Www.Somanuals.com. All Manuals Search And Download.

Positioning Speakers

I Standard speaker placement of the speakers system

Speaker placement plays an important role in the reproduction of Surround sound. The placement of the speakers varies depending

on the size of the room and the wall coverings used in the room. The illustration below shows an example of a layout for standard

speaker placement. Refer to this example when you position the speakers in order to experience the best of Surround sound.

For ideal Surround effects, all speakers should be installed.

If a center speaker or subwoofer is not connected, the sound from the unused channel is properly distributed to the connected

speakers in order to reproduce the best Surround sound possible.

Front right

Speaker

Front left

Speaker

Front

TV/Screen

The center speaker reproduces a richer sound image by enhancing the

perception of the sound's source and movement.

Sub-

woofer

Front

center

Speaker

The left, right, and center speakers should face the seated listener and be

placed at ear level.

Surround

The surround speakers reproduce the feel of a moving sound while creating

the sensation of being in the middle of the action.

Place the left and right surround speakers 1 meter (3 feet) above the

listener's ear level and facing toward the sides of the room, making sure that

the listener is within the speakers’ dispersion angle.

Subwoofer

Install a subwoofer with a built-in power amplifier for powerful bass sounds.

Surround

right

Speaker

Surround

left

Speaker

Place a subwoofer in the corner of a room or a similar position.

Refer to the speakers’ instruction manuals for details.

I Using the provided speaker labels

The speaker terminals (+) of this unit are given different colors for ease of identification. By attaching the provided speaker labels to

the speaker cables, the cables to be connected to the terminals can be identified easily.

Attach the speaker label of each color to the speaker cable for the corresponding terminal and connect the speaker cable to the

terminal having the same color as the label attached to the cable.

The speaker terminals are colored as follows.

Front left speaker (+):

Front Right speaker (+):

Center speaker (+):

white

red

green

blue

gray

Surround left speaker (+):

Surround right speaker (+):

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to Audio/Video Equipment

Incomplete

Before connecting

• Connect the plugs securely.

• Refer also to the instruction manual of each component to be

connected.

• When you connect the DVD Receiver to audio/video equipment, be

sure to turn off the power and unplug all the units from the plugs before

making any connections.

• About the DIGITAL OPTICAL OUT/IN connectors

Remove the protective caps before making

Insert completely

connections. When not in use, be sure to replace them.

Caution

When connecting this unit’s DIGITAL OPTICAL OUT jack to the digital in

jack of a CD recorder or MD recorder, do not connect the CD or MD

recorder’s digital output to this unit’s DIGITAL IN. A signal loop could be

created which may damage the units.

If you don’t connect TV audio output to this unit, you can

connect MD player or BS tuner audio output.

BS tuner,

MD player, etc.

MD Recorder, CassetteTape Deck,

CD Recorder, etc.

DIGITAL

OUT

OPTICAL

AUDIO

OUT

AUDIO

OUT

AUDIO

OPTICAL

SURROUND

SPEAKERS

ANTENNA

FRONT SPEAKERS

CENTER

AUDIO^PREOUT

AC INLET

REMOTE

CONTROL

FM 75

DO NOT connect the

power cord at this time.

OUT

MD/CDR/TAPE

VIDEO OUTPUT

SUB

WOOFER TV/LINE

DIGITAL

AV CONNECTOR

OPTICAL

OUT

VIDEO

Audio connection cable

Optical fiber cable

Signal flow

Download from Www.Somanuals.com. All Manuals Search And Download.

z Connection for the Onkyo MD Recorder,

CD Recorder or Cassette Tape Deck

The z terminal on the DVD Receiver is for connecting

Onkyo MD recorder, CD recorder or Cassette tape deck

equipped with the same z terminal. When an Onkyo

component is z -connected, you can point the remote

controller supplied with the DVD Receiver at the sensor on the

DVD Receiver and operate that component without having to

switch remote controllers. In addition, by connecting

components to the z terminal, you can also perform the

system operation given below.

To connect components using the z terminal, simply connect

a z cable from this z terminal to the z terminal of the

other component. An z cable with a 3.5 mm (1/8 inch)

miniature two-conductor plug comes with every cassette tape

deck, compact disc recorder and MD recorder that has an z

terminal.

Power on/ready function

When the DVD Receiver is in the standby state, if an z-connected

component is turned on, then the DVD Receiver also turns on and

the input source selected at this unit automatically switches to that

component.

Direct change function

When the play button is pressed on an z-connected component,

the input source selected at the this unit automatically changes to

that component.

Program Timer

You can operate timer playback and recording using this unit.

Sleep Timer

You can fall asleep to a music/radio program using the timer.

Power off function

When the DVD Receiver is placed in the standby state, all z-

connected components are automatically put in standby mode.

Note

Please change the name displayed by the input selector to match

the connected component (see ‘Changing the “MD” display to match

the connected source’ on page 40).

Onkyo MD recorder/CD recorder/

Cassette tape deck

z cable

ANALOG

OUTPUT

Be sure to connect

using the audio

connection cable.

SURROUND

ANTENNA

FRONT SPEAKERS

SPEAKERS

AUDIO^PREOUT

AC INLET

CENTER

REMOTE

CONTROL

FM 75

OUT

MD/CDR/TAPE

VIDEO OUTPUT

SUB

WOOFER TV/LINE

DIGITAL

AV CONNECTOR

OPTICAL

OUT

VIDEO

Notes

• Connect the plugs securely.

• Be sure to connect to the z connectors using the z cable.

• For remote control operation, the audio connection cables must

also be connected.

• If a component has two z terminals, you can use either one to

connect to the DVD Receiver .

• Do not connect the DVD Receiver’s z connector to any

component other than an Onkyo product. It may cause

malfunction.

• Certain component models may not be able to control this unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Making Antenna Connections

Connecting the Supplied FM and AM Indoor Antennas

SURROUND

SPEAKERS

ANTENNA

FRONT SPEAKERS

CENTER

AUDIO^PREOUT

AC INLET

REMOTE

CONTROL

FM 75

DO NOT connect the

power cord at this time.

OUT

MD/CDR/TAPE

VIDEO OUTPUT

SUB

WOOFER TV/LINE

DIGITAL

AV CONNECTOR

OPTICAL

OUT

VIDEO

AM indoor antenna

FM indoor antenna

(South American

models)

(Other

models)

Insert into the hole.

Press up and

hold the lever.

Insert the end of

the cord.

Release the lever to

secure the connection.

ANTENNA

FM 75

IAdjusting the position of the FM indoor antenna

Note

Insert one end of the AM antenna cord

to either of the AM antenna connectors

and the other end to the other

While listening to an FM program (see page 37), extend the antenna and move it

in various directions until the clearest signal is received, then secure the antenna

with push pins in the position with the least distortion.

connector. There is no difference

between one end of the AM antenna

cord and the other end, unlike the

speaker cords which have positive and

negative poles.

IAdjusting the position of the AM indoor antenna

While listening to an AM program (see page 37), set the antenna in the direction

and position where you receive the clearest sound.

Put it as far away as possible from the unit, TVs, speaker cables, and power

cords.

Connecting an AM Outdoor Antenna

Outdoor antenna

AM indoor antenna

An outdoor antenna will be more effective if it is stretched

horizontally above a window or outside.

Leave the supplied AM indoor antenna connected.

Note

To avoid the risk of lightning and electrical shock, grounding is

necessary. Follow item 14 of the "Important Safety Instructions" on

page 2 when you install an outdoor antenna.

ANTENNA

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting an FM Outdoor Antenna

If the FM reception is not very clear with the supplied antenna, connect an FM outdoor antenna instead of the indoor FM antenna.

FM outdoor antenna

Connecting coaxial cable to a 75/300 ohm antenna adapter*

1 Strip the end of the coaxial cable.

3 Remove the transformer wire A

from slit B and insert it into slit C.

15 mm

ANTENNA

Slit B

mm mm mm

FM 75

¹/4 ¹/8 ¹/4

in. in. in.

⁵/8 in.

Wire A

Slit C

Connecting 300 ohm ribbon

wire to a 75/300 ohm

2 With your fingernail or a small

screwdriver, press the stoppers

outward and remove the cover.

4 Insert the end of the cable.

5 Clamp it in place with pliers.

antenna adapter*

Loosen the screws and wrap

the wire around these screws.

Then tighten the screws with

a screwdriver.

Tighten

Loosen

* (European

models)

6 Reinstall the cover.

Not supplied

(Other models)

Supplied

Notes

• Install the antenna well away from tall buildings and in an area where FM stations can directly be received.

• Keep the antenna away from noise sources (neon signs, busy roads, etc.).

• It is dangerous to put the antenna close to power lines. Keep it well away from power lines, transformers, etc.

• To avoid the risk of lightning and electrical shock, grounding is necessary. Follow item 14 of the “Important Safety Instructions” on page 2 when

you install the outdoor antenna.

IDirectional Iinkage

Do not use the same antenna for both FM and TV (or VCR) reception since the FM and TV (or VCR) signals can interfere with each

other. If you must use a common FM/TV (or VCR) antenna, use a directional linkage type splitter.

Directional linkage

type splitter

To DVD Receiver

To TV (or VCR)

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the Power/

Turning on the DVD Receiver

Before connecting

STANDBY/ON

• Make sure that all the connections from pages 18 to 25 are

ON indicator

complete (the connection to the TV is required).

STANDBY indicator

Display

• Turning on the DVD Receiver may cause a momentary power

surge, which might interfere with other electrical equipment such

as computers. If this happens, use a wall outlet on a different

circuit.

PROGRESSIVE SCAN

THEATER DIMENSIONAL

IPM

I Setting the Clock Display

To display the clock while in Standby mode, hold down the

STANDBY/ON button for at least 2 seconds when switching from

On to Standby mode.

Connect the power cord to the AC

INLET of the DVD Receiver.

AC INLET

Note

Displaying the clock in Standby mode consumes the same amount of

power as in the On mode.

Connect the power cord to a wall

outlet.

The DVD Receiver enters the standby

mode and the STANDBY indicator lights

up.

AC INLET

to wall outlet

Press STANDBY/ON on the DVD

Receiver or ON on the remote

controller to turn on the DVD

Receiver.

Unit

The light and display on the DVD

Receiver’s front panel light. At the same

time, the STANDBY indicator goes off and

the ON indicator lights up.

ON indicator

Remote

Controller

STANDBY indicator

• To put the DVD Receiver in the standby

mode, press STANDBY/ON on the DVD

Receiver, or STANDBY on the remote

controller. Be sure to set the volume to

minimum before putting the DVD

Receiver in the standby mode for the

next use to avoid sudden loud sound

reproduction.

• While in the STANDBY mode, the DVD

Receiver can receive signals from the

remote controller.

• Setting the STANDBY button on the

remote controller to standby does not

shut off the power completely.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

Before operating the

remote controller

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

Press MODE TV/SETUP.

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

I Setting the TV System

The default setting of the DVD Receiver is AUTO, and unless you

notice that the picture is distorted when playing some discs, you

should leave it set to AUTO.

If you experience picture distortion with some discs, set the TV

system to match your country or region’s system. Doing this,

however, may restrict the kinds of disc you can watch. The table

below shows what kinds of disc are compatible with each setting

(AUTO, PAL and NTSC).

I Turning the unit on/off with the TV’s power

switch — IPM function

The DVD Receiver is equipped with the (IPM) system.

Just turn on your TV’s power switch and, in about 5 seconds,

the DVD Receiver turns on automatically. If you turn off the

TV’s power switch, IPM indicator flashes on the display and

the DVD Receiver automatically turns off in about 5 minutes.

To activate the IPM function

1 Connect the audio output of your TV’s audio output to the

DVD Receiver’s TV/LINE IN L/R jacks (refer to pages 18

and 19).

Disc

Output format

Position of TV SYSTEM mode

Format

Type

DVD

NTSC

PAL

MOD. PAL

PAL

AUTO

Even when connected with SCART cable, audio

connection to TV/LINE IN L/R jacks is needed (European

model).

NTSC

PAL

NTSC

PAL

2 Press IPM on the remote controller repeatedly to turn on

the IPM indicator on the unit.

NTSC

MOD. PAL

PAL

NTSC

PAL

Video CD

PAL

LATE NIGHT

PAL

NTSC or PAL

CD, No disc

Theater-Dimensional

IPM

1 Switch the DVD Receiver into standby.

2 Hold down ¢ then press STANDBY/ON until the display

indicates the new setting to switch the TV system.

The TV system changes as follows:

Notes

• The IPM system may not function properly with some TV sets.

• When using monaural TV, connect the audio output of the TV to

the DVD Receiver’s TV/LINE IN L jack.

AUTO =

NTSC

PAL

NTSC =

• When the TV is turned off while the DVD Receiver selects other

input source, the DVD Receiver does not turn off.

PAL

AUTO

Note that you have to switch the DVD receiver into standby

before each change.

About MOD. (Modulation) PAL

• SHRINK

Most models of the newly developed countdown PAL TV system

detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch

vertical amplitude, resulting in a display without vertical

shrinkage.

• If your PAL TV does not have a V-Hold control, you may not be

able to view NTSC disc because the picture may roll. If the TV

has a V-Hold control, adjust it until the picture stops rolling. On

some TVs, the picture may shrink vertically, leaving black bands

at the top and bottom of the screen. This is not a malfunction; it is

caused by the NTSC = PAL conversion.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

Speaker Setup

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP

SW MODE

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

You need to set up the speaker configuration for the speaker

system connected to the SPEAKERS connectors (see page

20.)

RANDOM

SHIFT

---

Before operating the

remote controller

Press MODE TV/SETUP.

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

Notes

• Speaker setup cannot be done if;

– Headphones are connected (see page 42)

• It is not necessary to set the parameters again once you have

completed the setup unless you change the speaker

configuration.

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Selecting the number of speaker

channels

Selecting the Subwoofer mode

Note

To check the present setting while the normal display is displayed,

press SP SETUP once. To change the setting, press the button

repeatedly within three seconds.

Press SW MODE on the remote

controller.

Remote controller

only

AUDIO

SW MODE

Remote controller

Press SP SETUP repeatedly to

only

select the number of channels for

With the first press of the button, you can

check the present setting. Then each

LAST M

the SPEAKERS system.

press of the button changes the subwoofer

mode as follows (a tip on how to select the

right subwoofer mode is in parentheses):

SP SETUP

→

SW Mode 2 (Factory setting)

(When large–wideband–front speakers

are connected)

Pressing the button repeatedly within three

seconds changes the number of channels

as follows (the corresponding speaker

configuration is described in parentheses):

↓

SW Mode 3

(When large–wideband speakers are

connected to all channel)

→

Speaker 2ch (Factory setting)

(Front left and right speakers)

↓

SW Off

Speaker 3ch

(When no subwoofer is connected)

↓

SW Mode 1

(Front left, center, and right speakers)

↓

Speaker 4ch

(Front left and right, plus surround left

(When small–with limited bass signal

handling–front speakers are

connected)

and right speakers)

↓

Speaker 5ch

(Front left, center, and right, plus

surround left and right speakers)

The normal display resumes in three

seconds.

The normal display resumes in three

seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

CH SEL

UP/DOWN

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

DISTANCE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

Before starting the procedure below, measure the distances

from each speaker to the listening position.

For pair speakers such as front left and right speakers, the

distance from the listening position to one speaker should be

the same as the distance to the other.

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

Before operating the

remote controller

Press MODE TV/SETUP.

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

In the procedure below, select the values which approximate

the actual distances.

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

DISPLAY

MUTING

Setting the Distance From the Listening Position to Each Speaker

Press DISTANCE.

The distance entry display for the front left

and right speakers appears.

Press CH SEL, then press

UP/DOWN repeatedly to select the

surround left and right speaker

distance.

Remote controller

only

CH SEL

ANGLE

DISTANCE

SUBTITLE

You cannot enter the following distances:

• Distances longer than the distance set

for the front speakers.

• Distances shorter than the distance

obtained by subtracting “4.5 m (15 ft.)”

from the distance entered for the front

speakers.

SUBTITLE

Press UP/DOWN to select the front

left and right speaker distance.

SURROUND

DOWN

SURROUND

DOWN

Note

You can select a distance between 0.3 m

and 9 m (1 ft. and 30 ft.).

If you selected a speaker configuration with no

surround speakers on the opposite page, this

step will be skipped.

Press CH SEL, then press

UP/DOWN repeatedly to select the

center speaker distance.

ANGLE

Press DISTANCE.

The normal display resumes.

CH SEL

DISTANCE

You cannot enter the following distances:

SUBTITLE

I Changing the units of measurement

• Distances longer than the distance set

for the front speakers.

You can change the units of measurement while setting the

distance. Press the DISPLAY button on the remote controller to

select between meters and feet.

SURROUND

• Distances shorter than the distance

obtained by subtracting “1.5 m (5 ft.)”

from the distance entered for the front

speakers.

DOWN

DISPLAY

Note

If you selected a speaker configuration with no

center speaker on the opposite page, this step

will be skipped.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

Speaker Setup

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

CH SEL

UP/DOWN

TEST TONE

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

Adjust each speaker’s relative volume balance so that the

volumes of all speakers’ test tones sound equal at the

listening position.

IPM

SETUP

DOWN

TIMER

RANDOM

Before operating the

remote controller

Press MODE TV/SETUP.

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Adjusting Each Speaker's Relative Volume Balance – Test Tone

COND.M

Press TEST TONE.

When you have completed the

adjustment by repeating step 2,

press TEST TONE.

The test tone stops and the normal display

resumes.

Each speaker emits the test tone (pink

noise) and the display shows the speaker

emitting the test tone in the following

order:

TEST TONE

Remote controller

only

COND.M

When test tone adjustments are

completed, return the volume to its usual

level.

TEST TONE

LEFT

(Front left ch.)

→

CENTER

(Center ch.)

↓

↑

Note

SUBWFR

(Subwoofer)

↑

RIGHT

Even if you don’t press TEST TONE, the test

tone will stop after two minutes.

(Front right ch.)

↓

SURR R

(Surround right ch.)

SURR L

(Surround left ch.)

←

Set voume at a level for easy comparison

of all speakers’ output (around volume

level 50 is standard).

Note

No test tone will be emitted from a speaker

which is not included in the speaker

configuration on pages 28-30 even if it is

actually connected.

FUNC.M

Press CH SEL repeatedly to select

the speaker, then press UP/DOWN

to adjust the volume level.

CH SEL

The volume level can be adjusted between

–12dB and +12dB.

SUBTITLE

SURROUND

DOWN

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started Using Your

DVD Receiver

Before you can start to enjoy the digital audio and video

on DVDs, be sure that you have either performed the

Setup Navigator procedure described in the previous

section or made the necessary settings in the Setup

screen menus as outlined in the next section to set up

the DVD receiver to correspond to your home system.

Having made these settings, you are now ready to start

using the DVD receiver to enjoy DVDs, Video CDs, CDs

and MP3s.

Disc tray

PROGRESSIVE SCAN

Theater-Dimensional

IPM

VCD

MP3

DVD

I About the

and

marks in

the pages related to disc operation

DVD

VCD

means the function or title is related to DVD-Video operation.

means the function or title is related to Video CD operation.

means the function or title is related to audio CD operation.

means the function or title is related to MP3 operation.

MP3

DVD

VCD

MP3

Playing DVDs, Video CDs, CDs and MP3s

Remote

controller

Press 0.

Select the item you want to view.

Before operating the remote controller,

press MODE RECEIVER.

The disc tray comes out.

• When a DVD is loaded:

Load a disc.

Select the item with the cursor buttons

(2/3/5/∞) or the number buttons then

press ENTER.

Load a disc with the label side facing up,

using the disc tray guide to align the disc.

• When a Video CD is loaded:

LAST M

COND.M

FUNC.M

Use the number buttons to select the

item.

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

D SETUP

DOWN

RANDOM

-- ---

Press £.

• The disc tray closes, and playback

Notes

begins.

• The TV screen size is factory set to present the wide screen

format (16:9 aspect ratio). If you have a standard TV screen (4:3

aspect ratio), this setting can be changed to match your TV

screen size in the Video 1 menu (page 70).

• Do not move the DVD Receiver during playback. Doing so may

damage the disc.

• Use 0 on the DVD Receiver to open and close the disc tray. Do

not touch the disc tray while it is moving. Doing so may cause the

DVD Receiver to malfunction.

• Do not press down on the disc tray or put any objects other than

playable discs on the disc tray. Doing so may cause the DVD

Receiver to malfunction.

• In many instances, a menu screen appears when playback of a

movie is complete. Prolonged display of an on-screen menu may

damage your television set, permanently etching that image onto

its screen. To avoid this, be sure to press 7 once the movie is

complete.

• MP3 only: It may take a few seconds for

the DVD Receiver to locate the track on

the disc, depending on the complexity

of the file structure.

• Depending on the disc, a menu may be

displayed. If a menu is displayed,

proceed to step 4.

• To pause playback, press 8. To resume

playback, press 8 or £.

Play indicator

Pause indicator

Inserted disc indicator (DVD, CD, VCD)

I When an operation is prohibited

There are times when you are using the DVD Receiver and

attempt to perform an operation, but for some reason it cannot

be performed. When this occurs, one of the two following

icons appears on the screen.

The operation is prohibited by the DVD Receiver.

The operation is prohibited by the programming on the

disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started Using Your DVD Receiver

The Setup Navigator has been designed to simplify the

process of getting the DVD Receiver ready to perform.

Designed as a series of on-screen multiple-choice questions,

the Setup Navigator automatically sets the video and

language settings according to how the questions are

answered. Once this procedure is complete, it will be possible

to begin using the DVD Receiver to enjoy DVDs.

The procedure on this page describes the operations

necessary to function within the Setup Navigator screens. A

detailed description of the contents of each question that

appears on the screen can be found on the following pages.

Using the Setup Navigator

I When setting up for the first time

DVD

SETUP

Press DVD SETUP.

When DVD SETUP is pressed for the first

time, the following screen appears.

Though the Setup Navigator may be used

more than once, this screen only appears

the first time DVD SETUP is pressed.

Some DVDs start playing automatically when loaded in the

DVD Receiver. Because the Setup Navigator cannot be used

if a disc is playing, it is recommended to set up the DVD

Receiver using the Setup Navigator before loading a DVD for

the first time. If a DVD has been loaded, be sure to press 7

before proceeding.

V2 Language General

Video1

I To change the answer to a prior question

Setup Navigator

Use the cursor button (2) to return to previous screens.

Please note, however, that you cannot go forward using the

cursor button (3), so it will be necessary to answer all the

questions that occur after the screen that was returned to.

Setup Navigator

Start

Auto Start Off

Setup using the Setup Navigator

ENTER

SETUP

Move

Select

Exit

I To exit the Setup Navigator

Press DVD SETUP while on any of the screens to exit the

Setup Navigator. Please note that if the Setup Navigator is

exited before all the questions are answered, no settings are

changed.

Use the cursor buttons (5/∞) to

make a selection.

• If you are going to use the Setup

Navigator, it is not necessary to change

the setting on the first screen. Please

proceed to the next step.

Note

• On-screen information ( ) appears to clarify the functions and

explain the options available.

• If you do not want to set up the DVD

Receiver using the Setup Navigator,

use the cursor button (∞) to select [Auto

Start Off] at this time.

The Setup Navigator function may still

be used at a later time in manual Setup

screen menu operation (page 68).

• If the input is not set to DVD the screen will not appear, even if

you press the DVD SETUP button. In that case, press 0 or £ to

set the input to DVD.

Press ENTER.

The selection is entered and the next

Setup Navigator screen appears.

Use steps 2 and 3 as a basis for entering

selections on the all of the Setup Navigator

screens described on the following pages.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

Before operating the

remote controller

Press MODE RECEIVER.

---

2/3/5/∞

ENTER

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

SETUP

RETURN

DVD SETUP

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Settings: Widescreen (16:9) (Factory setting)

I Setting the OSD Language

Standard (4:3)

(On-Screen Display Language)

Note

The [OSD Language] screen establishes the OSD language,

or on-screen display language, which refers to the language

that is used by the DVD Receiver in menus and on-screen

messages. Additionally, the language that is established at

this setting will also be used for the default audio and subtitle

language.

There are two screen formats that can be used to display

wide-screen format DVDs: letter box and pan & scan. When

[Standard (4:3)] is selected in the Setup Navigator, the letter box

screen format is automatically selected. To switch the preference to

the pan & scan format, make changes in the Setup screen Video 1

menu [TV Screen] setting (page 70).

V2 Language General

Video1

Setup Navigator

English

français

Deutsch

Italiano

Español

I Confirming the settings

Language

OSD Language

The [Exit Setup Navigator] is the final screen in the Setup

Navigator.

Select the On Screen Language

V2 Language General

Video1

ENTER

SETUP

Move

Select

Exit

Setup Navigator

Settings: English (Factory setting)

Save Changes

Delete Changes

Start Again

Exit Setup Navigator

français

Deutsch

Italiano

Español

Changes are saved

ENTER

SETUP

Select

Exit

Move

Asian models only

Settings: Save Changes (Factory setting)

Select to have the DVD Receiver make all of the

necessary video and language settings according

to your responses in the Setup Navigator.

English (Factory setting)

Notes

Delete Changes

• The languages that can be selected may be different from those

Select to exit the Setup Navigator without changing

any of the system settings.

shown above.

• In addition to setting the [OSD Language], the audio and subtitle

language are also set at this time. If you wish to change the

audio or subtitle language to a different language, make changes

in the Setup screen Language menu [Audio Language] and

[Subtitle Language] as needed (pages 75, 76).

Start Again

Select to return to the [OSD Language] screen of

the Setup Navigator and do the settings again.

I To change other DVD receiver settings in

I Setting the TV screen size

the Setup screen menus

The [TV Type] screen establishes the size, or more

appropriately the width to height ration of your television or

monitor. The width-to-height ratio of conventional TVs is 4:3,

while the width-to-height ratio of wide screen and high-

definition TVs is 16:9. This width-to-height ratio is called the

aspect ratio.

The procedure for changing the settings in the Setup screen

menus is described on page 68.

V2 Language General

Video1

Setup Navigator

TV Connection

TV Type

Widescreen(16:9)

Standard(4:3)

Widescreen TV

16:9 aspect raito

SETUP

ENTER

Move

Select

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started Using Your DVD Receiver

DVD

VCD

When a Menu Screen is Displayed

To Open or Return To the DVD or Video

CD Menu Screen

Although this differs depending on the disc, pressing MENU,

TOP MENU, or RETURN during DVD playback or RETURN

during Video CD playback displays the menu screen. Refer to

the DVD or Video CD disc jacket and accompanying

documentation for more information.

Menu screens are displayed for DVDs that have menu

screens or Video CDs that include Playback Control (PBC).

DVDs often contain extra information that can be accessed in

the DVD menu and sometimes makes navigating DVD menu

screens as enjoyable as watching the feature presentation.

Example: When a DVD that has menu screens is loaded

I To play Video CDs without displaying menu

1 Highlight Clips

2 Chapter List

screens

3 Commercial Header

4 Subtitles

5 Soundtrack

Video CDs with Playback Control (PBC) display a menu

screen when play is started. It is possible, however, to play

back Video CDs without displaying menu screens.

When a Video CD with PBC is loaded, press 7, and then the

number button of the track you want to play.

6 Start Main Feature

Example: When a Video CD that has Playback Control is

loaded

I When screen saver appears

STANDARD VOCAL BEST

Don't Tekno for an Answer

Bad Whack Naff Riff

dubmyheadbassman

Gooey Love Jingle

Praise the Day

Bertie B.& the Goans

Hood in the Boyz

Sleek Machine

Philip William

Formerly an Artist

Pfeuti

During disc playback, when the disc is paused, a screen saver

appears after a fixed period. Press 8 or £ to resume

playback. Alternately, the unit can be programmed to turn off

at this time (page 71).

G3, Ba-san

Abstract Jazz Phunk

Rock the Love Jive

John Torn

Hot Monkey Stick

CD’s may be played with TV screen on or off.

I To navigate a menu screen

• Although individual DVD titles may differ, when a menu

screen is displayed, use the cursor buttons (2/3/5/∞) and

ENTER on the remote control. The cursor buttons are used

to move around the options on the screen and ENTER is

used for selection.

• Occasionally, the number buttons may also be used to

make selections. If this is possible, using number buttons

serves to directly select an option on a menu screen. Only

number buttons are used to make selections on Video CD

menu screens.

• When the Video CD has more than one menu, pages can

be advanced to or returned to with 4 or ¢.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

2/3/5/∞

ENTER

TOP MENU

RETURN

Before operating the

remote controller

Press MODE RECEIVER.

POWER

INPUT

TV CH

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

PROGRESSIVE SCAN

Theater-Dimensional

IPM

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

4/¢

DVD

VCD

MP3

VCD

MP3

Chapter (Track) Skip Forward/Skip

Back

Forward and Reverse Scanning

Remote controller Fast forward and reverse scanning

TUNER PRESET

Remote controller

Advancing to the next chapter (track)

Press and hold 1/¡ (4/¢ on

the front panel) during playback to

scan forwards or backwards.

While “¡ 1” or “1 1” is displayed on-

screen blinking, release the button to

resume normal playback.

TUNER PRESET

Press ¢.

Press to skip forward to the next chapter

(track).

Unit

Skipping back to the previous chapter

(track)

Unit

Variable speed scanning (Remote

controller only)

Press 4.

• Press once to skip back to the start of

the chapter (track) currently playing.

1 Press (but don’t hold) ¡ or 1

during playback to start scanning.

• Press twice to skip back to the start of

the previous chapter (track).

“¡ 1” or “1 1” appears on screen.

2 Depending on the type of disc

playing, you can increase the

scanning speed by pressing ¡

or 1.

The scan speed is shown on-screen.

DVDs have three scanning speeds;

1 ↔ 2 ↔ 3

CD and Video CDs have two scanning

speeds;

1 ↔ 2

MP3 have only one scanning speed.

3 Press £ to resume normal

playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

Getting Started Using Your DVD Receiver

STANDBY

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

RETURN

SETUP

STANDBY/ON

TV VOL

TV MUTING

REPEAT

STEP/SLOW

PROGRESSIVE SCAN

TUNING

TUNER PRESET

Theater-Dimensional

IPM

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

7 £

DVD

VCD

MP3

Resuming playback from where you

stopped

Stopping Playback and Switching

Power Off

Use the resume feature to restart playback from the point that

the disc was stopped last.

This features cannot be used with MP3s and CDs.

Press 7.

Playback stops.

Remote controller

Press 7 once.

The display shows “STOP” then

“RESUME”, and the stop position is

memorized.

Remote controller

Unit

• The resume position remains

memorized as long as the disc is in the

DVD Receiver — even if you switch the

power off.

Unit

• Pressing 7 twice causes the disc to

return to the beginning when £ is

pressed again. The display shows the

disc type (DVDs or Video CDs).

Press 0.

The disc tray comes out.

Remove the disc.

Press £.

Playback starts from the resume position.

Remote controller

Unit

Press STANDBY/ON (STANDBY on

the remote controller).

The disc tray goes back in.

Remote controller

STANDBY

Notes

• The actual restart position may be slightly before or after the

resume position.

Unit

• If you want to remove the disc but still want to resume playback

from the last stopped position, use the LAST MEMORY feature

instead (page 64).

• The memorized resume position is erased when you open the

disc tray, or change the Parental Lock Level setting (page 79) or

On-screen Display (OSD) setting (page 74).

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

INPUT SELECTOR 2/3

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

Listening to the Radio

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

RANDOM

DOWN

TIMER

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

There are two ways to select radio stations:

• Manual tuning

TV CH

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

• Presetting radio stations then selecting the preset

channels

INPUT 2/3

TUNING

TUNER PRESET

TUNING 1/¡

MODE

TUNER PRESET 4/¢

MODE

MD/CDR/TAPE

PROGRESSIVE SCAN

Theater-Dimensional

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

IPM

MUTING

PRESET MEMORY

TUNING PRESET 2/3

Tuning in a weak frequency (only for FM stations)

When you tune in a stereo FM station, the FM STEREO indicator

lights up if the signal is sufficiently strong.

Tuning Manually

Unit

Press INPUT 2/3 on the unit or

INPUT SELECTOR 2/3 on the

remote controller repeatedly to

select the band (FM or AM).

If the signal is weak, you may not be able to tune to the station.

In this case, press MODE on the remote controller.

The FM STEREO indicator and AUTO goes off. Then select the

e.g. When FM is selected.

station to which you want to listen. (At this time, the station will be in

mono and interstation noise will be heard.)

Remote controller

Remote

controller

INPUT SELECTOR

MODE

Press and holdTUNING/PRESET

2/3 on the unit orTUNING on the

remote controller for about

1 second.

Unit

Presetting Radio Stations

You can preset up to 30 AM and FM stations.

Tune in the radio station you wish

to preset (see steps in the left

Remote

controller

column of this page).

TUNING

Unit only

Press PRESET MEMORY.

• When the band is FM

Auto tuning starts. The frequency

changes in 50 kHz steps.

The preset number starts flashing in the

display.

When a broadcast is received, scanning

stops and the frequency flashes in the

display.

• When the band is AM

The frequency changes as follows:

– (South American model)

In 10 kHz steps

– (Other models)

Unit

(Within about 8 seconds), press

TUNING/PRESET 2/3 on the unit

or TUNER PRESET 4/¢ on the

remote controller to select the

preset number.

In 9 kHz steps

When you release the button, the frequency

stops changing and flashes in the display.

Remote

controller

Unit

While the frequency is flashing (for

about 5 seconds), press

TUNER PRESET

TUNING/PRESET 2/3 on the unit

or TUNING 1/¡ on the remote

controller to change the frequency.

Unit only

Press PRESET MEMORY.

• The frequency changes each time you

press the button.

The radio station is registered to the

Remote

controller

preset channel.

• You can change the frequency as long

as the frequency in the display is

flashing. Each press of either button

causes the frequency to flash for about

5 seconds.

To register another preset station, repeat

steps 1 to 4.

TUNING

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

Listening to the Radio

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

Before operating the

remote controller

Press MODE RECEIVER.

POWER

INPUT

TV CH

CURSOR 5/∞

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

PROGRESSIVE SCAN

Theater-Dimensional

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

IPM

DISPLAY

MUTING

PRESET MEMORY

Select the station you wish to

name.

FM Auto Preset Memory

See “Selecting preset stations” on page 39.

This function enables you to store the frequencies into

memory automatically, without having to go through and

store each frequency manually.

Hold down the PRESET MEMORY

button for a few seconds. “AUTO

Press the DISPLAY button on the

remote controller for at least 2

seconds.

The DVD Receiver enters character input

mode, “NAME IN” appears on the display, then

“.....” flashes on the display.

MEM” will start flashing on the

display. Keep holding down the

button for a few more seconds to

DISPLAY

Hold down

start the Auto Memory function.

The frequencies are scanned from low to high.

Up to 20 FM stations with the best signal

quality are selected, sorted in order from low to

high frequency, and stored into the preset

memory. Even if you have already preset more

than 10 AM stations, you can only store up to

30 AM/FM stations total.

Use the Cursor 5/∞ buttons to

select a character and press the

ENTER button to store the

character.

Flashing “.....” mark appears next to the stored

character.

Note

All FM stations previously stored in memory will be replaced with

Repeat step 3 to store more characters. You

can enter characters in any positon by moving

the cursor with the Cursor 2/3 button. You can

store up to 8 characters.

When 8 characters have been entered,

“COMPLETE” appears on the display. To enter

less than 8 characters, press ENTER

repeatedly to move the cursor to the end, or

hold down the DISPLAY button for more than 2

seconds.

new Auto Memory stations.

Naming a Preset Station

You can name the preset stations so that the name, instead

of the frequency, appears on the display when you select the

station. The following 54 characters can be used:

_ABCDEFGHIJKLMNOPQUSTUVWXYZ” ’&()[ ]*+,-./

=?0123456789

Note

Tip

You cannot enter characters for an RDS station that has a program

service (PS) name, since the PS name has priority over other

character information (For more information on RDS stations, see

page 39).

To change an entered name, follow the steps above. In step 3, use

the Left/Right Cursor buttons 2/3 to select the name you want to

change. Change the letters of the name one at a time. To delete a

letter, select the blank space (_). You cannot delete the whole name

at once.

• RDS reception is available only on the European models.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

INPUT SELECTOR 2/3

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

INPUT 2/3

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

PROGRESSIVE SCAN

Theater-Dimensional

IPM

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

TUNER PRESET 4/¢

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

PRESET MEMORY

TUNING/PRESET 2/3

Selecting Preset Stations

Erasing a Preset Station

Before selecting preset stations, you need to preset the radio

stations. See “Presetting Radio Stations” on page 37.

Select the preset channel you wish

to erase (see steps in the left

column of this page).

Press INPUT SELECTOR 2/3 on

the remote controller or INPUT 2/3

on the unit to switch the input

source to the FM or AM.

Remote

1_controller

INPUT SELECTOR

Unit only

Press PRESET MEMORY.

“ERASE” appears in the display.

The band selected in this step will not

affect the next step.

Unit

While “ERASE” is flashed (for

about 8 seconds), press PRESET

MEMORY again.

The selected preset channel will be

erased.

Unit

Press TUNING/PRESET 2/3 on the

unit or TUNER PRESET 4/¢ on

the remote controller repeatedly to

select the preset number of the

desired radio station.

Receiving RDS (European models

only)

Remote

controller

TUNER PRESET

When an RDS (Radio Data System) station broadcasting PS

(Program Service Name) information is received, the RDS

indicator lights up and the name of the station is displayed.

(RDS reception is only available in areas where RDS

broadcasts are available.)

Note

If you press TUNING/PRESET 2/3 on

the unit or TUNER/PRESET 4/¢ on

the remote control for more than 0.5

seconds, the unit enters the manual

tuning mode. See step 2 in “Tuning

Manually” on page 37.

Various Functions While Listening to

Radio Programs

To use the following functions, see page 42.

• Adjusting the Volume

• Muting the Sound

• Listening Through Headphones

• Controlling the Brightness of the display on the DVD Receiver

Enjoying the Sound Effects While

Listening to Radio Programs

See page 48.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

INPUT SELECTOR 2/3

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

Playing the Connected Source

This section shows you how to play the

sources connected to the DVD Receiver.

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

SETUP

RETURN

You may need to see “Connecting to a TV”

on pages 18, 19 and “Connecting to Audio/

Video Equipment” on page 22 while

TV VOL

TV MUTING

REPEAT

STEP/SLOW

INPUT 2/3

TUNING

TUNER PRESET

PROGRESSIVE SCAN

MODE

MD/CDR/TAPE

Theater-Dimensional

following the steps in this section.

IPM

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

PRESET MEMORY

I About digital sound

Press INPUT SELECTOR 2/3 on

the remote controller or INPUT 2/3

on the unit to select one of the

following input sources:

Remote

controller

INPUT SELECTOR

If the equipment is digitally connected to the DVD Receiver,

the sound from the digital input will automatically be selected

and reproduced instead of the analog sound as explained

below.

• When the TV source is selected, the digital sound from the

DIGITAL OPTICAL INPUT jack is reproduced.

• TV

• MD/CDR/TAPE

The selected input source appears in the

multipurpose display. Also the input

source indicator is lit in the display until

the DVD Receiver is switched to another

input source.

Unit

When the digital sound is reproduced, the DIGITAL indicator

lights up in the display. According to the received sound

system, the ŸDIGITAL or DTS indicator lights up.

ŸDIGITAL DTS

e.g. When MD is selected.

Note

Start playing the selected source.

The DVD Receiver only reproduces DOLBY DIGITAL, DTS, and

PCM sound formats from connected equipment.

Various Functions While Playing the

Connected Source

I Changing the “MD” display to match the

connected source

Press the INPUT 2/3 button on the unit to select MD.

Press the PRESET MEMORY button. “NAME SEL” is displayed

then “MD” flashes in the display.

Press the INPUT 2/3 button repeatedly to select the desired

operation.

To use the following functions, see page 42.

• Adjusting the Volume

• Muting the Sound

• Listening Through Headphones

• Controlling the Brightness of the display on the DVD Receiver

The display changes as follows:

MD→CDR→TAPE→MD

Press the PRESET MEMORY button to select. “COMPLETE”

appears then the display switches back to the selected input.

Enjoying the Sound Effects While

Playing the Connected Source

See page 48.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the Onkyo MD Recorder/CD Recorder/Cassette Tape Deck With the

Supplied Remote Controller

I Operating the Onkyo CD recorder, MD recorder or cassette tape deck to the DVD Receiver with

the z cable (see page 23)

Point the remote controller toward the DVD Receiver when you want to operate this equipment.

When connecting the CD Recorder, use the Input Selector to select CDR (see page 40). Selecting CDR enables you too use the

CDR function.To connect the Cassette Tape Deck, follow the same procedure and select TAPE.

INPUT SELECTOR

Press INPUT

SELECTOR 2/3

to select

MD/CDR/TAPE.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CD recorder

MD recorder

STANDBY

CONTROL

PROGRAM

CLEAR

INPUT SELECTOR

Play

LAST M

COND.M

FUNC.M

Stop/Cancel

Pause

Stop/Cancel

Pause

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

2/8

Number

buttons

PROGRAM

CLEAR

SW MODE DISTANCE

LATE NIGHT

Down

D/ST

SURROUND

IPM

D SETUP

RANDOM

DOWN

TIMER

SHIFT

RANDOM

Fast Reverse

Fast Forward

Repeat mode

Random play (press “0”

Fast Reverse

Fast Forward

Repeat mode

Random play (press “0”

-- ---

TOP MENU

TV VOL

POWER

INPUT

REPEAT

RANDOM

REPEAT

RANDOM

TV CH

DVD

SETUP

RETURN

within 10 seconds of

pressing SHIFT)

within 10 seconds of

pressing SHIFT)

TV VOL

TV MUTING

REPEAT

A-B

STEP/SLOW

DISPLAY

PROGRAM

CLEAR

Change display

Memory

DISPLAY

PROGRAM

CLEAR

A-B

Change display

Memory

REPEAT

Clear

TUNING

TUNER PRESET

0–9, +10 (--/---) Number buttons

A-B Repeat

1/¡

4/¢

MODE

MD/CDR/TAPE

MODE

Play mode (random,

program, normal)

0–9, +10 (--/---) Number buttons

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MODE

Play mode (random,

program, normal)

DISPLAY

MUTING

Cassette tape deck

Play

Stop

2/8

Reverse play (reverse tape

deck only)

Rewind

Fast forward

REPEAT

Selects reverse mode (“,

[, ”)

Notes

• You can use graied buttons in the illustration to control the DVD Receiver in any mode.

• Some buttons may not work properly.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

Various Functions Common to all

the Sources

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

RANDOM

DOWN

TIMER

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

RETURN

SETUP

TV VOL

TV MUTING

REPEAT

STEP/SLOW

MASTER VOLUME

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

PROGRESSIVE SCAN

Theater-Dimensional

IPM

MUTING

DIMMER

VOL 5/∞

PHONES jack

Adjusting the Volume

Listening Through Headphones

The volume of the front left and right, center, surround left

and right, and subwoofer speakers will be adjusted at the

same time.

Connect the plug of the stereo headphones to the

PHONES jack on the DVD Receiver.

When headphones are connected, you can adjust the

volume of the sound through the headphones.

PROGRESSIVE SCAN

PROG

Operating with the remote controller

Press VOLUME 5/∞.

VOLUME

Notes

• The speakers will not reproduce sound while headphones are

connected.

Operating with the unit

• The listening mode is set to “STEREO” after connecting the

headphones to the PHONES jack.

• When you disconnect the headphones, the listening mode returns

to the previous mode.

Turn MASTER VOLUME clockwise

to increase the volume, or

counterclockwise (anticlockwise)

to decrease the volume.

Controlling the Brightness of the

display on the DVD Receiver

PROGRESSIVE SCAN

Muting the Sound

Theater-Dimensional

IPM

Remote

controller only

MUTING

Press MUTING.

“MUTING” appears in the multipurpose

display for about three seconds. Also the

MUTING indicator flashes in the display

during the muting mode.

Remote

controller only

Press DIMMER.

Each press of the button changes the

brightness as follows:

DIMMER

The display becomes dimmer.

↓

To restore the sound, press MUTING again.

The display is dimmest.

↓

The display resumes the original

brightness.

Tip

If you turn off the unit during muting, and turn it on again, the sound

will be restored.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Timer Functions

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

This manual uses the 24-hour display to

IPM

SETUP

RANDOM

DOWN

TIMER

Before operating the

SHIFT

describe how to set the clock. The clock

display may also be switched to a AM/PM

display.

TIMER

---

TOP MENU

TV VOL

remote controller

POWER

INPUT

TV CH

Press MODE RECEIVER.

2/3/5/∞

DVD

SETUP

RETURN

ENTER

TV VOL

TV MUTING

REPEAT

STEP/SLOW

Caution

• In the event of a power outage, or the power cord

being removed from the socket, the clock display

will disappear. Please reset the time again.

• When using the clock functions, make sure that the

power cord is connected to a proper power supply.

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

DISPLAY

Setting the current date and time

TIMER

Press TIMER repeatedly until

Start the clock.

Match the date, time etc. then press

ENTER. The display switches back to the

function.

“CLOCK” appears in the display on

the unit, then press ENTER.

Blinking

Press the cursor buttons (5/∞) to

Display switches back to the function.

select a day of the week, then press

ENTER.

While the desired day of the week is

flashing, press ENTER.

I Displaying the current time

Press CLOCK on the remote controller.

If the clock is not set, “ADJUST” flashes. Please set the

clock.

When the power on, press CLOCK on the remote control to

display current date and time. Press CLOCK again to return to

the previous display.

Days of the week are displayed as follows:

CLOCK

SUN (Sunday)

THU (Thursday)

FRI (Friday)

SAT (Saturday)

MON (Monday)

TUE (Tuesday)

WED (Wednesday)

When the unit is in standby mode, press CLOCK on the

remote control to display the current date and time. The

display will disappear after 7 seconds. (Power saving mode)

To switch the clock display 24-hour/

AM/PM, press DISPLAY.

DISPLAY

Press the cursor buttons (5/∞) to

Display disappears after 7 seconds

set the time.

Tip

When using the 24 hour display, you can

also use the number buttons to set the

time.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

Using the Timer Functions

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

Caution

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

• You cannot change the settings to the current time or turn off time

during playback timer or recording timer operation.

---

SHIFT

TIMER

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

RETURN

SETUP

Please make sure that the system is properly connected.

The playback timer and recording timer will not function

if connections are incomplete

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

SLEEP

MUTING

Using the Sleep Timer

Types of timers

SLEEP

SLEEP:

Puts the system into standby mode at the

preset time.

The sleep timer is activated by the SLEEP

button.

Press SLEEP.

“SLEEP 90min” appears in the multipurpose

display for about 5 seconds, which means the

unit will turn off and enter standby mode in 90

minutes. Also the SLEEP indicator is lit in the

display while the sleep timer is On.

(Playback)

ONCE:

Activates only once after setting.

WEEKDAY: Activates playback timer during weekdays

(mon-fri).

• You can change particular days of the week.

WEEKEND: Activates playback timer during weekends.

• You can change particular days of the

weekend.

Each press of the SLEEP button makes the

remaining time shorter by 10 minutes. Press

the Cursor 5/∞ buttons to adjust the time in 1

minute intervals.

• You can set WEEKDAY and WEEKEND times

to the same day.

(Recording)

REC:

Can be set to ONCE, or EVERY. Setting to

ONCE, activates the record timer only once.

Set to EVERY to record at a particular time

everyday.

Checking the remaining time

Press SLEEP while the Sleep Timer is On.

If you press SLEEP while the remaining time is displayed,

the remaining time is reduced by 10 minutes.

I About the timer display

When pressing TIMER repeatedly to display the various

times, a lit TIMER indicator means that the time is set.

Canceling the Sleep Timer

Press SLEEP repeatedly until the SLEEP indicator goes

off.

Lights

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

STANDBY

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

For FM, AM timer playback, first preset the radio stations

(page 37).

IPM

SETUP

RANDOM

DOWN

TIMER

Before operating the

remote controller

Press MODE RECEIVER.

SHIFT

TIMER

---

TOP MENU

TV VOL

POWER

INPUT

Caution

TV CH

2/3/5/∞

ENTER

DVD

SETUP

RETURN

If the current time is not set, you cannot preset the playback timer.

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Presetting the playback timer

TIMER

Repeatedly press TIMER to select

Press (5/∞) to select the stop

the desired timer type.

playback time.

When the desired time is displayed, press

ENTER.

Press ENTER to select either “WEEKDAY,”

“WEEKEND,” “ONCE.”

When radio timer playback is selected, use

the cursor buttons to display the desired

station, then press ENTER.

Hint

The TIMER indicator at the top of the display

lights up when the respective timer is set.

Skip to step 6 if you selected ONCE timer.

Repeatedly press (5/∞) to select

Setting the day.

The characters displayed represent the

current day setting.

the component type of timer

playback.

Press ENTER when the desired

component is displayed.

Sun. Tue. Thu.

Mon. Wed.

Sat.

Set

Fri.

• If you select a component, which is not

connected to this unit, the timer will

activate, and the unit will turn on, and

the function will change at the timer

time, but nothing will happen.

To change the day.

Press (2/3) so that the desired day blinks.

Press (5/∞) to select/deselect the day.

Press (5/∞) to select the start

playback time.

Press ENTER to confirm the setting.

When the desired time is displayed, press

ENTER.

Lights

Tip

• When set to the desired playback start time

(ON) is set, playback is automatically set to

stop (OFF) in an hour.

• When using the 24 hour display, you can also

use the number buttons.

The TIMER indicator lights up.

Set the power to Standby.

Press STANDBY to put the system into

standby mode.

STANDBY

Caution

Even if the playback timer is set, the timer will

not operate unless the power is set to the

standby mode. Make sure the system is in

standby mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

Using the Timer Functions

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

Be sure to preset FM and AM stations beforehand (page

37).

IPM

SETUP

DOWN

TIMER

RANDOM

Before operating the

remote controller

Press MODE RECEIVER.

SHIFT

TIMER

---

TOP MENU

TV VOL

POWER

INPUT

Caution

TV CH

2/3/5/∞

DVD

SETUP

RETURN

• If the current time is not set, you cannot preset the playback timer

ENTER

TV VOL

TV MUTING

REPEAT

STEP/SLOW

make sure that the current time is set.

• Except for EVERY, all record timers record only once. When the

recording is finished, the timer is deactivated.

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Setting the record timer

TIMER

Press (5/∞) to select the desired

Repeatedly press TIMER on the

radio station.

remote control to select REC.

Display the desired radio station, then

press ENTER.

Press ENTER after selecting “REC”.

Press (5/∞) to select the recording

source.

Select TV, FM or AM then press ENTER.

Press the (5/∞) cursor buttons to

select ONCE or EVERY.

Caution

Setting the recording timer to ONCE will only

record one time.

ONCE recording:

Press (5/∞) to select a day (or NEXT),

then press ENTER.

(Displays when your next set time)

Repeatedly press (5/∞) to select

the recording start time.

When the desired time is displayed, press

ENTER.

(Selects the day of week)

Tip

At first, only the current day blinks.

• When setting the timer for MD recording, set

the recording to start one minute in ahead

since there are cases when recording will not

start for a few seconds.

EVERY recording:

Set the day.

• When set to the desired playback start time

(ON) is set, playback is automatically set to

stop (OFF) in an hour.

• When using the 24 hour display, you can use

the number buttons to set the time.

The TIMER indicator at the top of the display

lights up when the respective timer is set.

To change the day of week setting:

Press (5/∞) to set the recording

Press (2/3) so that the desired day blinks.

end time.

Display the desired time, then press

ENTER.

Presses (5/∞) to select/deselect the day.

Press ENTER to confirm the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

STANDBY

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

Before operating the

remote controller

Press MODE RECEIVER.

SHIFT

TIMER

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

5/∞

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Switching the timer on or off

STANDBY

Set the power to Standby.

Press STANDBY to put the system into

standby mode.

• Use when you want to cancel an active timer setting, reset

a canceled timer, or when you want to revise a record

timer.

• If the current time is not set, you cannot preset the timer.

• The muting function activates during

timer recording. If you would like to

monitor the sound during recording,

press MUTING on the remote to cancel

the muting function.

TIMER

Repeatedly press TIMER to select

the desired timer type.

The TIMER indicator at the top of the display

lights up when the respective timer is set.

Caution

• Even if the record timer is set to sure the

timer, the timer will not operate unless the

power is set to the standby mode. Make sure

the system is in standby mode.

Use (5/∞) to switch the timer on or

I In the case of overlapping timer settings

off.

Approx. 2 seconds after switching the

timer, the previous screen will reappear.

• When the power is turned on during timer playback, even if

you set another timer, it will not be activated. The initial

timer is canceled when the standby mode is initiated.

Active

WEEKDAY

Canceled

REC

Active

WEEKEND

Time

9:00

10:00

11:00

12:00

Caution

Pressing ENTER, activates the start time (etc.)

setting mode.

off

• If WEEKDAY timer end time and the REC timer start time

are set to the same time, the REC timer will not activate.

Please all a one-minute difference end time and start time

of each times.

• If two or more ONCE / WEEKDAY / WEEKEND / REC are

set to the same timers start times are given the following

priority: ONCE → WEEKDAY → WEEKEND → REC.

• If the REC timer is deactivated because the power is

already on (etc.), the TIMER indicator does not light in the

display and the timer settings are cancelled.

• If the power is already on when a timer’s start time occurs

and there is another overlapping timer, the second timer

will not operate. The power turns off automatically at the

end time of the first timer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying the Sound Effects

The surround sound of the DVD Receiver enables you to enjoy the presence of a movie theater or concert hall in your room.

Before using any sound effect, make sure the Speaker Setup configurations have been set (see pages 28-30).

The speaker configuration is very important for surround sound. See “Connecting Speakers” on page 20 and “Positioning

Speakers” on page 21.

Following are the sound systems the DVD Receiver can reproduce.

I DOLBY DIGITAL Surround and DTS (Digital

I DOLBY PRO LOGIC II Surround

Theater System) Surround

This is a 5-channel surround system of a new generation,

bridging the gap between the previous 4-channel (Left/Right

Front, Center and monaural surround channels) Pro Logic

surround and 5.1-channel Dolby Digital surround. Dolby Pro

Logic II provides a Movie mode optimized for viewing movies

and a Music mode optimized for listening to music. In the

Movie mode, the surround channel, which was monaural and

based on narrow band, is reproduced in stereo so that the

feeling of movement in the played movies is enhanced. In

the Music mode, the surround channel reproduces natural

sound field even with 2-channel music sources.

Recommended speaker setup

Center Speaker

Left front speaker

Right front speaker

Subwoofer

Left surround speaker

Right surround speaker

The Movie mode allows you to enjoy VHS and DVD software

This 5.1 channel digital surround format enables you to

individually play five full-range (20Hz–20kHz) channels (left

and right front, center, and two surround channels) plus an

LFE (Low Frequency Effect) channel for low-range effect

sound. It will create a realistic sound like that heard in

theaters and concert halls.

carrying the

marking as well as some of TV

broadcast programs. The Music mode allows you to enjoy

stereo music from CD, etc.

I Onkyo’s original Digital Signal Processing

(DSP) modes

DOLBY DIGITAL Surround

DVD videos that have the

this system.

The DVD Receiver offers the following special Onkyo sound

effects for sources other than Dolby Digital and DTS sounds.

mark are recorded using

To playback DOLBY DIGITAL Surround sound from

connected equipment, you must make the digital connection

in addition to the above speaker configuration.

Orchestra

This mode is suitable for classical and opera music. The

center channel is cut and the surround channels are

emphasized to widen the stereo image. It simulates a natural

reverberation as created in a large hall.

DTS Surround

DVD videos and audio CDs that have the

recorded using this system.

mark are

Unplugged

This mode is suitable for acoustic instrumental sounds,

vocals, and jazz music. By emphasizing the front stereo

image, it simulates the acoustics in front of the stage.

To playback DTS Surround sound from connected equipment

such as an LD player, you must make the digital connection

in addition to the above speaker configuration.

Notes on DTS Surround

Studio-Mix

• If you play a DTS Surround encoded disc with the DVD Receiver,

or a DTS encoded disc using a digitally connected player, you may

hear a noise for a short while until the DTS decoder of the DVD

Receiver recognizes the DTS encoded signal and starts operating.

This is not a malfunction.

This mode is suitable for rock and popular music. Lively

sounds with a powerful acoustic image will make you feel as

if you are in a club.

• If you play a DTS Surround source in fast reverse or fast forward,

pause, or skip a chapter or track, noise may be heard. This is not

a malfunction.

TV Logic

This mode offers the realistic acoustics of a TV program

being aired in the TV studio. It enhances the entire surround

sound and clarity of conversation.

• Even when playback of the DTS Surround source stops and the

DTS signal transmission ends, the DVD Receiver remains in DTS

mode and the DTS indicator remains lit. This is to prevent noise

when you pause, fast forward, fast reverse, or skip a chapter or

track of the playback source. Therefore, if the source switches

from the DTS signal to a PCM (2 channel digital stereo) signal

suddenly, the PCM signal may not be played. In such a case, stop

playback for about three seconds, then resume playback.

• Some CD players (if connected to the DVD Receiver) and LD

players may be unable to play DTS Surround sources correctly

even if you connect the player to the DVD Receiver digitally. In

such a case, the digital signals (such as the output level, sampling

frequency, frequency response, etc.) processed by the DVD

Receiver cannot be recognized as DTS data by the DVD Receiver

and you may hear noise instead of the proper sound.

All Ch St (All Channel Stereo)

This mode is useful for background music. The front and

surround channels will create a stereo image.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Input Sources and Available

Listening Modes

I Theater-Dimensional (T-D)* mode

The ideal home theater is realized by the multichannel sound

reproduction with the complete speaker configuration and

speaker positioning described on page 21. However,

sometimes it is difficult to meet all those conditions. In reality,

you may only have front speakers, or not be able to place the

surround speakers in position.

The available listening modes varies depending on the

sound type of the input source. The table below shows the

correlation between the input source types and listening

modes.

(The sources listed at the top of each column can use the

listening modes marked with an ×.)

Even if your speaker system is not complete, you can enjoy

the multichannel surround sound by using the Theater-

Dimensional mode. Theater-Dimensional mode sets the

output channels to generate the most suitable virtual

surround reproduction according to the number of the

speaker channels set in “Speaker Setup” on page 28 or 29.

Input Source Signals

Analog/PCM Dolby Digital

DTS

Possible Cassette tape

sources

deck, Video

tape, Audio CD,

VIDEO CD,

DVD video,

LD,

Audio CD,

Video tape,

Record,

FM broadcast,

AM broadcast

Digital

(satellite)

broadcast

Listening

Modes

The importance of the speaker setup

Calibrating each speaker’s sound pressure is essential for

home theater sound reproduction. The same thing can be

said for virtual surround sound reproduction. Especially level

matching and the time alignment of the two speakers that

reproduce virtual surround signals becomes an even more

important factor than with normal multichannel reproduction.

PCM 96kHz

other

2/0

other

STEREO

THEATER-DIMENSIONAL

DOLBY DIGITAL

DTS

For the DVD Receiver, the calibration for the multichannel

reproduction (see “Setting the Distance from the Listening

Position to Each Speaker” on page 29 and “Adjusting Each

Speaker’s Relative Volume Balance - Test Tone” on page 30)

provides the most appropriate level matching.

PL II MOVIE/PL II MUSIC

ORCHESTRA

UNPLUGGED

STUDIO-MIX

TV LOGIC

ALL CH ST

Notes

• For input sources which include surround channel signals like the

multichannel DOLBY DIGITAL and DTS surround sounds, virtual

processing is applied to those surround channel signals.

• For 2 channel input sources, the surround channel elements are

automatically extracted with DOLBY PRO LOGIC processing

before virtual processing is applied.

• For monaural or front 3 channel stereo sources, the virtual

surround effect does not work since those input sources do not

include the surround channel signals.

Note

• The listening mode is set to “STEREO” when a PCM sound with a

sampling frequency higher than 48kHz is played. Such high-

resolution sounds are reproduced from sources such as DVD

video.

• When the Speaker setup is set to 2 channels (SP 2CH), you can’t

select DOLBY DIGITAL, DTS or PLII MOVIE/PL II MUSIC. Also,

when speaker setup is set to 2 channels (SP 2CH) or 3 channels

(SP 3CH), you can’t select ORCHESTRA, UNPLUGGED,

STUDIO-MIX, TV LOGIC or ALL CH ST.

* Theater-Dimensional is a virtual surround technology developed

by Onkyo. This technology is approved by Dolby Laboratories for

the virtual surround processing of Virtual Dolby Digital and Virtual

Dolby Surround products.

Checking the Sound System of the

Playing Source

The DVD Receiver will automatically detect the sound

system when DOLBY DIGITAL Surround (

), DTS

Surround ( ), or PCM/MP3 DIGITAL (2 channel digital

stereo) is played back. The corresponding sound system

indicator lights in the DVD Receiver’s display.

DOLBY DIGITAL DTS

DIGITAL (PCM/MP3)

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying the Sound Effects

Choosing Theater-Dimensional Mode

Theater-Dimensional mode is the technology which controls

the characteristics of the sounds reaching the listener’s left

and right ears, therefore, there is a sweet spot where you

can best experience the Theater-Dimensional effects. You

need to adjust the location of the sweet spot and these other

factors for the best possible Theater-Dimensional effect.

Before operating the

remote controller

Press SHIFT.

MODE

TV/SETUP

UP/DOWN

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SHIFT

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

This switches the functions

of buttons. Press the desired

button within 10 seconds

after pressing this button.

IPM

SETUP

RANDOM

DOWN

TIMER

T-D/ST

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

SETUP

RETURN

I Listening angle

TV VOL

TV MUTING

REPEAT

STEP/SLOW

(“LSTN. ANGLE” appears in the display.)

THEATER DIMENSIONAL indicator

TUNING

TUNER PRESET

Left speaker

Right speaker

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

PROGRESSIVE SCAN

The greater the distance

between the two speakers is,

the wider the angle is.

MUTING

Theater-Dimensional

Listening

angle

IPM

40°

20°

STEREO Theater-Dimensional

See “The Input Sources and Available Listening Modes” on

page 49.

Press T-D/ST on the remote

controller or STEREO/Theater-

The listening angle is the angle at the listening position

where the two lines from the left and right speakers meet.

Remote controller

Dimensional on the unit.

“Theater-Dimensional” scrolls across in

the display and the THEATER

D/ST

You need to adjust the listening angle in the following

cases:

D SETUP

DIMENSIONAL indicator on the unit

lights. In other listening modes, press

once to change to Stereo and press again

to change to T-D.

• Consider the listening angle as being formed from the

left and right front speakers since the virtual surround

signals are output from the front speakers.

Unit

Set “LSTN. ANGLE” to one of the following settings, which

you feel is most effective (the listening angles in

parentheses are ideal):

• Normal (30°)

• Wide (40°)

• Narrow (20°)

To change the listening angle, proceed to

the following steps.

Notes

Press MODE TV/SETUP.

MODE

• Theater-Dimensional mode cannot be activated if;

– Headphones are connected, or

– The source is PCM sound with a sampling frequency higher than

48kHz.

• Theater-Dimensional mode will be canceled and the T-D indicator

goes off when:

– Another listening mode is chosen, or

– The input source is switched to a type of source which Theater-

Dimensional mode cannot process.

TV/SETUP

Press T-D SETUP.

“LSTN. ANGLE” is displayed, then the

current Listening Angle setting is

displayed.

Remote controller

only

D/ST

Each press of the button changes the item

as follows:

D SETUP

NORMAL

↓

WIDE

↓

NARROW

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Dolby Pro Logic II/

Changing the Sound to Stereo

Onkyo’s Original DSP Modes

See “The Input Sources and Available Listening Modes” on

page 49.

See “The Input Sources and Available Listening Modes” on

page 49.

Before operating the

MODE

RECEIVER TV/SETUP

ACOUSTIC

STANDBY

CONTROL

PROGRAM

CLEAR

STANDBY

CONTROL

PROGRAM

CLEAR

INPUT SELECTOR

remote controller

LAST

COND.M

FUNC.M

LAST

COND.M

FUNC.M

SHIFT

Press SHIFT.

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

LATE NIGHT

D/ST

SURROUND

This switches the functions

of buttons. Press the desired

button within 10 seconds

after pressing this button.

This switches the functions

of buttons. Press the desired

button within 10 seconds

after pressing this button.

SURROUND

T-D/ST

IPM

SETUP

RANDOM

DOWN

IPM

SETUP

RANDOM

DOWN

TIMER

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

POWER

INPUT

TV CH

DVD

SETUP

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

MODE

MD/CDR/TAPE

PROGRESSIVE SCAN

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

Theater-Dimensional

IPM

MUTING

STEREO/Theater-Dimensional

SURROUND MODE

Remote controller

Press SURROUND on the remote

Press T-D/ST on the remote

SURROUND

controller or SURROUND MODE on

the unit to choose “PL II” or the

DSP mode.

controller or STEREO on the unit.

D/ST

In the display, “STEREO” appears and the

STEREO indicator lights up.

DOWN

D SETUP

The current listening mode appears in the

display when the button is pressed once,

then each press of the button changes the

listening mode as follows:

Unit

DSP indicator

PL II MOVIE → PL II MUSIC

↑

↓

ALL CH ST

ORCHESTRA

↑

TV LOGIC

↑

↓

UNPLUGGED

↓

STUDIO-MIX

• In the display, “PL II MOVIE” or “PL II

MUSIC” appears and the Ÿ PRO LOGIC II

indicator lights up.

• PL II and DSP mode cannot be selected

when “SPEAKER 2CH” is selected. (Only

“STEREO” can be selected.)

• Only “PL II MOVIE”, “PL II MUSIC” or

“STEREO” can be selected when

“SPEAKER 3CH” is selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying the Sound Effects

Adjusting Each Speaker’s Relative Volume Balance Temporarily

You can readjust each speaker’s relative volume balance

according to your preference while listening to the sound.

The adjusted values will return to the values set on page 30

when the DVD Receiver enters standby mode, or the main

power is switched off unless you save the values.

MODE

TV/SETUP

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

Press MODE TV/

SETUP first.

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

CH SEL

TEST TONE

UP/DOWN

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

---

SHIFT

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

RETURN

SETUP

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

FUNC.M

(Checking each speaker’s relative

(Adjusting each speaker’s relative

volume balance)

Remote controller

only

CH SEL

While playing the source, press CH

SEL repeatedly.

Each press of the button changes the

speaker which outputs the sound and the

selected speaker appears in the display in

the following order:

Press CH SEL repeatedly to select

the speaker, then press UP/DOWN

to adjust the volume level.

The volume level can be adjusted

between –12dB and +12dB.

FUNC.M

SUBTITLE

CH SEL

SURROUND

Repeat this step to change another

speaker’s volume balance.

LEFT (Front left ch.)

DOWN

↓

CENTER (Center ch.)

↓

Saving the adjusted values

RIGHT (Front right ch.)

↓

Remote controller

Press TEST TONE.

SURR R (Surround right ch.)

only

COND.M

↓

SURR L (Surround left ch.)

↓

TEST TONE

SUBWFR (Subwoofer)

↓

Speaker volume adjustment mode off

Note

Any speaker that is not included in the speaker

configuration on pages 28 and 29 is not

selected even if it is actually connected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the LATE NIGHT Function

Boosting the Super Bass Sounds/High

Frequency Sounds

• The LATE NIGHT function operates when the sound is

DOLBY DIGITAL Surround.

If you play a movie at low volume at night, set this function

to “LOW” or “HIGH” to narrow the dynamic range of the

sound and make it easier to hear.

You can enjoy more dynamic sounds by boosting the super

bass/high frequency sounds, even with decreased volume.

MODE

RECEIVER TV/SETUP

ACOUSTIC

STANDBY

CONTROL

PROGRAM

CLEAR

INPUT SELECTOR

MODE

RECEIVER TV/SETUP

LAST

COND.M

FUNC.M

ACOUSTIC CONTROL

ACOUSTIC

STANDBY

CONTROL

PROGRAM

CLEAR

INPUT SELECTOR

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

LAST

COND.M

FUNC.M

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

IPM

SETUP

DOWN

TIMER

RANDOM

SW MODE DISTANCE

LATE NIGHT

SHIFT

Before operating the

remote controller

D/ST

SURROUND

---

TOP MENU

TV VOL

LATE NIGHT

IPM

SETUP

RANDOM

DOWN

TIMER

POWER

INPUT

SHIFT

---

TOP MENU

TV VOL

TV CH

SHIFT

DVD

SETUP

Press SHIFT.

RETURN

POWER

INPUT

TV VOL

TV CH

TV MUTING

REPEAT

STEP/SLOW

DVD

RETURN

SETUP

This switches the functions

of buttons. Press the desired

button within 10 seconds

after pressing this button.

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

PROGRESSIVE SCAN

TUNING

TUNER PRESET

Theater-Dimensional

IPM

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MODE

MD/CDR/TAPE

MUTING

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

ACOUSTIC CONTROL

Remote controller

Press ACOUSTIC CONTROL.

Each press of the button changes the

acoustic mode as follows:

ACOUSTIC

CONTROL

Remote controller

Press LATE NIGHT.

The current setting appears in the display.

only

LATE NIGHT

“A. CTRL 1” appears in the display

and the A.CTRL indicator turns on.

→

To change the setting, press the button

repeatedly while the current setting is

displayed.

IPM

The super bass sounds are boosted.

↓

“A. CTRL 2” appears in the display

and the A.CTRL indicator turns on.

Unit

• When the button is pressed while

DOLBY DIGITAL Surround sound is

being reproduced

“L.N OFF”, “L.N HIGH” or “L.N LOW”

can be selected.

The super bass sounds are further

reinforced and the high frequency

sounds are also reinforced.

↓

“A. CTRL OFF” appears in the display

and the A.CTRL indicator goes off.

Note

The LATE NIGHT effect is determined by each DOLBY DIGITAL

sound source. Some sources may produce little or no effect.

Download from Www.Somanuals.com. All Manuals Search And Download.

Locating a Specific Title/Folder/

Chapter/Track/Location

DVD

VCD

MP3

Searching for a Title, Folder, Chapter,Track, or Location on a Disc

Notes

This DVD Receiver offers different ways of accessing the

information on a DVD, Video CD, CD or MP3. Using SEARCH,

you can search for titles or chapters on a DVD, tracks on a

Video CD, CD or folders or tracks on a MP3 and even select

the point in time to start playback.

• For some discs, selection can be made using the top menu on

the DVD. In this case, press TOP MENU to display the menu

screen and then make your selection.

• With some DVDs, the search operation may not be possible and

may stop shortly after being performed. In this case the

mark

will appear on the screen.

• Time search is not possible with CDs and MP3s.

Press SEARCH repeatedly to select

the type of search.

• When performing DVD or Video CD time search, playback may

start from a slightly different time than that specified.

• Time search is not possible when the disc is stopped.

• Searching using time search is not possible during PBC playback

of Video CDs.

The type of search changes which each

press as follows.

DVD

3 Title

Off 2

3 Chapter

I To perform a direct title or chapter/track

Time 2

search using the number buttons

• Press the number buttons while the disc is stopped to

select a title or track number.

Video CD

3 Track

3 Time

Off 2

• Press the number buttons while the disc is playing to select

a chapter or track number.

• To select number 3, press 3.

3 Track

3 Off

• To select number 10, press +10 and 0.

• To select number 37, press +10, +10, +10 and 7.

MP3

3 Folder

3 Track

Off 2

Press the number button(s) of the

desired title, chapter or track or of

the specific time where you would

like to begin playback.

LAST M

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

• To select number 3, press 3.

IPM

D SETUP

DOWN

• To select number 10, press 1 and 0.

• To select number 87, press 8 and 7.

RANDOM

When performing a time search:

• To select 21 minutes, 43 seconds,

press 2, 1, 4, and 3.

• To select 1 hour, 14 minutes, press 7, 4,

0, and 0.

Press £.

Playback of the selected title, folder,

chapter or track starts. When a time search

is performed, playback begins at the

appointed time.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

PROGRAM

CLEAR

Number

buttons

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

MODE

RECEIVER

TOP MENU

POWER

INPUT

TV CH

DVD

SETUP

2/3/5/∞

RETURN

Press MODE

RECEIVER first.

TV VOL

TV MUTING

REPEAT

ENTER

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

MP3

Using the MP3 Navigator

Use the MP3 Navigator to make searching for the track(s) you

want to play easier. You can also use it to add or clear tracks

from the program list.

I Navigate using the following controls:

Cursor buttons (2/3) Select folder or tracks from the

current screen.

Cursor buttons (5/∞) Select the previous/next folders or

tracks. To move rapidly up or down a

Load a CD-ROM containing MP3

tracks.

long list of folders or tracks, press

and hold the Cursor buttons (5/∞).

Press MENU to enter the MP3

Navigator screen.

The left side of the screen shows a list of

folders containing MP3 tracks.

ENTER

Play the currently selected folder or

track. MP3 tracks that are unplayable

on this system are automatically

skipped and the display shows

“UNPLAYABLE”.

Total number of Tracks

Exit the MP3 Navigator

MP3 Navigator

Current :

1-3

PROGRAM

Add the currently selected track to

the program list. (Tracks in the

program list are marked .)

Pressing PROGRAM repeatedly will

add the track to the program list

repeatedly.

Folder

Track

1.01_LOO~1

2.02_SWE~1

3.03_FAL~1

4.04_CAR~1

5.05_SOS~1

1.F_001

2.F_002

3.F_003

ENTER

SETUP

Play

Exit

Total number of Folders

See “Programming MP3s” on page

60 for how to use program play.

If you display the MP3 Navigator when a

disc is playing, the currently playing folder

and track numbers are shown at the top

left of the screen.

CLEAR

Clear the currently selected track

from the program list.

On the right side is a list of MP3 tracks

from the first folder in the list on the left.

MP3 Navigator

1~20

Current :

1~1

1-3

Folder

Track

1.F_001

2.F_002

3.F_003

1.01_LOO~1

2.02_SWE~1

3.03_FAL~1

4.04_CAR~1

5.05_SOS~1

CLEAR

ENTER

SETUP

Clear

Play

Exit

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

Repeat Play

You can repeat an entire title, folder, chapter or track, or

just a part.

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

CLEAR

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

REPEAT

A-B

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

DVD

VCD

DVD

VCD

MP3

Repeating a Disc,Title, Folder, Chapter

or Track

Repeating a Specific Segment

Repeat play of a specified section

REPEAT

Press REPEAT repeatedly.

Each time you press REPEAT, the repeat

mode changes as follows:

Press A-B at the beginning and

end of the section you want to

repeat.

• First time you press A-B, “Memory

(REPEAT A)” appears on screen

(display). When A-B is pressed a

second time, the disc returns to the

location where A-B was pressed first

and plays the selected section

repeatedly.

(Characters in parentheses appear in the

front panel display.)

DVD

Repeat Chapter (REPEAT CHP) → Repeat

Title (REPEAT TTL) → Repeat Off

(Previous display)

VCD

“RPT” indicator lights up.

Repeat Track (REPEAT TRK) → Repeat

Disc (REPEAT DSC) → Repeat Off

(Previous display)

MP3

Return to a specified location on a disc

Repeat Track (REPEAT TRK) → Repeat

Folder (REPEAT FLD) → Repeat Disc

(REPEAT DSC) → Repeat Off (Previous

display)

1 Press A-B at the desired

location.

2 When you want to return to the

specified location, press £.

“RPT” indicator lights up.

I To cancel A-B repeat play

Press CLEAR. Playback continues, but the repeat function is

canceled.

I To clear the specified location

Press CLEAR to cancel repeat play or to clear the specified

location that was set using A-B.

I To repeat a program

Press REPEAT once during program playback to repeat the

program.

Notes

• With some DVDs, there may be times when repeat playback is

I To cancel repeat play

Press CLEAR. Playback continues, but the repeat function is

canceled.

not possible. In these cases, the

mark will appear on the

screen.

• With Video CDs, repeat play is not possible when the menu is

displayed (PBC playback). To perform repeat play, start

playback without displaying a menu by pressing the track

number to be repeated when the disc is stopped, and then press

REPEAT.

Note

If you press 4/¢ during track repeat or chapter repeat, the

repeat mode may be cancelled.

• You cannot use A-B repeat when listening to an MP3.

• If you switch camera angle during repeat play, repeat play is

cancelled.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

Still Frame/Slow Play

The video images on DVD and Video CD can be viewed

as a still frame, played back at slow speeds and even

advanced frame by frame.

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

SETUP

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

STEP/SLOW +/–

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

DVD

VCD

DVD

VCD

Viewing a still frame

Viewing slow playback

Press 8, STEP/SLOW +/–.

Press and hold STEP/SLOW +/–

STEP/SLOW

during playback.

When viewing a DVD, if the paused picture

shakes, select the [Field] setting in the

Setup screen Video 2 menu [Still Picture]

setting as described in the section on page

74.

STEP/SLOW

During slow playback, press STEP/

SLOW +/– repeatedly to change the

slow-motion speed.

There are four forward slow-motion play

speeds (STEP/SLOW +):

I Frame by frame advance playback:Viewing

3 1/16

3 1/8

one frame at a time

1/2 2

1/4 2

You can’t use frame review with Video CDs.

1 Press 8, STEP/SLOW +/–.

2 Press STEP/SLOW +/–.

There are two reverse slow-motion play

speeds:

Slow 1 ↔ Slow 2

STEP/SLOW +: The picture advances one frame each

time the button is pressed.

STEP/SLOW –: The picture backs up a DVD a few frames each

time the button is pressed.

Note

You can’t use slow reverse play with Video CDs.

I To return to normal playback

When viewing a still frame playback, pressing 8 or £ restores

I To return to normal playback

When viewing a slow playback, pressing £ restores normal

normal playback operation.

playback operation.

Notes

• There is no sound when viewing still frames or slow playback, or

when advancing one frame at a time.

• Still frame, slow play, or frame advance playback may not be

possible with certain titles. In this case, the

mark is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing in a Favorite Order

The titles and chapters within a title on a DVD and

similarly MP3, CD and Video CD tracks can be arranged

to play in the order you want.

With this DVD receiver, it is possible to make a program

as you watch a DVD or Video CD or while listening to an

MP3 or a CD.

DVD

Programming DVDs

A program with a maximum of 24 steps can be memorized.

In the program window, use the

number buttons to enter the

numbers of the titles or chapters in

the order you want to program them

in.

LAST M

COND.M

FUNC.M

PROGRAM

Press PROGRAM.

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

The Program screen appears.

SW MODE DISTANCE

LATE NIGHT

Program Chapter

Current:

Program Title

2(/20)

D/ST

SURROUND

Title

• To program DVD titles/chapters 9, 7,

and 18 in order, press 9, 7, +10 and 8.

IPM

D SETUP

DOWN

RANDOM

-- ---

Program Chapter

Current:

Program Title

2(/20)

Title

Program Memory Off

ENTER

PROGRAM

Chapter

Move

Play

Exit

Program Chapter

Program Title

Program Memory Off

Move

Title

Current:

Title

(Chapter 1~18)

ENTER

PROGRAM

Exit

Play

Program Memory Off

Input title number

ENTER

^PROGRAMExit

Move

Play

Program Chapter

Program Title

“PROGRAM” appears in the display.

Chapter

Title

Current:

Title

(Chapter 1~18)

Use the cursor buttons (2/3) to

select either [Program Chapter] or

[Program Title].

Program Memory Off

ENTER

PROGRAM

Exit

Move

Play

Once the program type is selected,

use the cursor button (∞) to enter

the program window.

Input chapter number

When [Program Chapter] is selected, you

must also select what title the chapters to

be programmed are in. Use the cursor

button (5) to highlight “Title” and then use

the number buttons to enter the title

number to be used.

Press ENTER or £.

• Playback starts in the set order.

• Press PROGRAM to return to the

previous display. The program will not

begin until £ is pressed.

• To stop the program play, press 7.

Notes

• When programming chapters, chapters not programmed may

appear on the screen. This is not a malfunction.

• Programming may not be possible with certain DVDs. On these

types of discs, the

mark will appear on the screen when

programming is attempted.

• Only chapters within the same title can be programmed during

chapter programming.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

Number

buttons

PROGRAM

CLEAR

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

MODE

RECEIVER

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

Press MODE

RECEIVER first.

POWER

INPUT

TV CH

DVD

SETUP

2/3/5/∞

ENTER

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

VCD

Programming Video CDs, CDs

A program with a maximum of 24 steps can be memorized.

I To save a program in memory

This DVD Receiver can memorize the programs on up to 24 DVDs.

By turning the [Program Memory] to [On], the DVD Receiver will save

your program and recall it the next time you use the same DVD.

When the program memory exceeds 24, programs will be erased in

chronological order from the oldest program in memory.

PROGRAM

Press PROGRAM.

The program screen appears. When a

Video CD or CD is loaded, the cursor

appears in the program window.

Program Track

1 Use the cursor button (∞) to highlight [Program Memory]

1(/10)

0.00

Track

Current:

Total Time

and use the cursor button (3) to select [On].

Program Chapter

Program Title

Title

Chapter

Current:

Title

(Chapter 1~18)

ENTER

PROGRAM

Exit

Move

Play

Program Memory On

Off

Move

ENTER

PROGRAM

Exit

Select

2 Press ENTER.

Use the number buttons to enter the

numbers of the tracks in the order

you want to program them in.

• To program tracks 9, 7, and 18 in order,

press 9, 7, +10 and 8.

The program is saved in memory.

LAST M

COND.M

FUNC.M

Note

SP SETUP TEST TONE CH SEL

AUDIO

When a DVD with a program stored in memory is loaded, program

playback may start automatically.

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

I To erase a program saved in memory

• To edit the program, refer to the

IPM

D SETUP

DOWN

RANDOM

procedures on the previous page.

The DVD receiver erases programs in chronological order when the

maximum number of programs that can be held in memory is

exceeded. To prevent the DVD receiver from erasing older programs

that you may still use regularly, or when you don’t want to use a

program anymore, it is possible to manually erase programs stored

in memory.

-- ---

Press ENTER or £.

• Playback starts in the specified track

order.

1 Load a DVD that has a program stored in memory.

2 Press PROGRAM.

• Press PROGRAM to return to the

previous display. The program play will

not begin until £ is pressed.

The program screen appears.

3 Use the cursor button (∞) to highlight [Program Memory]

and use the cursor buttons (3/∞) to select [Off].

4 Press ENTER.

• To stop the program play, press 7.

The program is cleared from memory.

If you press CLEAR in stop mode, the program will be cleared from

memory and [Program Memory] will be turned to [Off].

Note

• You cannot program when playing a Video CD using menu

selections (during PBC).

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing in a Favorite Order

MP3

Programming MP3s

A program with a maximum of 24 steps can be memorized.

Use the number buttons to enter a

three-digit track number.

The number of tracks in the current folder

is displayed in the top-left of the screen.

LAST M

COND.M

FUNC.M

PROGRAM

Press PROGRAM to enter the [MP3

Program] screen.

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

If you added tracks to the program list from

the “Using the MP3 navigator” on page 55,

the tracks are displayed here.

D/ST

SURROUND

Once you’ve entered a valid track number,

the name of the track appears.

IPM

D SETUP

DOWN

RANDOM

-- ---

MP3 Program

Folder 001~25 – – – – – – – – : – – – – – – – –

Total number of folder and track

001:008

– – –:– – – – – –:– – – – – –:– – –

Folder name

Track name

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

MP3 Program

Folder : 001~25

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

– – – – – – – – : – – – – – – – –

ENTER

PROGRAM

Exit

Move

Play

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

ENTER

PROGRAM

Exit

Move

Play

From this screen you can enter folder and

track numbers directly to build up a

program list.

Press ENTER or £.

• Playback starts in the set order.

Use the number buttons to enter a

three-digit folder number.

The number of folders on the disc is

displayed in the top-left of the screen.

• Press PROGRAM to return to the

previous display. The program will not

begin until £ is pressed.

LAST M

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

• To stop the program play, press 7.

SW MODE DISTANCE

Once you’ve entered a valid folder number,

LATE NIGHT

D/ST

SURROUND

the name of the folder appears.

IPM

D SETUP

RANDOM

DOWN

-- ---

MP3 Program

Track 001~10

FOLDER~1 : – – – – – – – –

001:– – –

– – –:– – – – – –:– – – – – –:– – –

– – –:– – – – – –:– – – – – –:– – – – – –:– – –

ENTER

PROGRAM

Exit

Move

Play

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

PROGRAM

CLEAR

Number

buttons

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

MODE

RECEIVER

RANDOM

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

Press MODE

RECEIVER first.

TV CH

DVD

SETUP

2/3/5/∞

ENTER

RETURN

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

DVD

VCD

MP3

Additional programming options

After you have made a program, it is then possible to confirm,

add, or clear the contents of the program.

I To delete a number

1 Press PROGRAM.

2 Use the cursor buttons (5/∞/2/3) to highlight the incorrect

I To confirm the contents of a program

On a CD or Video CD track program, press PROGRAM to

confirm.

number and then press CLEAR.

The number is deleted. If the number was before another number,

the later numbers are reordered automatically.

The program screen displays the current program.

On a DVD, select the program type (title or chapter) with the

cursor buttons (2/3).

The current DVD title or chapter program can then be confirmed on

the appropriate program screen.

3 Press PROGRAM to exit the program screen.

Notes

• The complete program will be deleted if the disc tray is open or

power off (standby).

• Pressing CLEAR when the disc is stopped will clear all programs.

I To add to a program

1 Press PROGRAM.

2 Use a number button to add a new title, chapter, or track at

the end of the program.

3 Press PROGRAM to exit the program screen.

I To add a title/chapter/track to a program

during playback

Press and hold PROGRAM for about 2 seconds.

The current title/chapter/track number appears on-screen together

with the program step number. If there isn’t already a program then a

new one will be created.

e.g. DVD

Chapter 07 3 Program 03

I To insert a number

1 Press PROGRAM.

2 Use the cursor buttons (5/∞/2/3) to highlight the number

after the new number to be placed and then press the

number button(s) of the number to be inserted.

The new number is inserted before the previously selected

number.

3 Press PROGRAM to exit the program screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

Random Play

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

Play titles, chapters, or tracks on a disc in random order.

+10

SHIFT

RANDOM

-- ---

TOP MENU

Before operating the

remote controller

Press SHIFT.

TV VOL

ENTER

POWER

INPUT

TV CH

DVD

SETUP

RETURN

SHIFT

TV VOL

TV MUTING

REPEAT

STEP/SLOW

This switches the functions

of buttons. Press the desired

button within 10 seconds

after pressing this button.

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

DVD

VCD

MP3

Playing in Random Order

DVD

VCD

MP3

RANDOM

Random playback of chapters within one

title

Random playback of tracks

Press RANDOM.

Press RANDOM once, then press

ENTER or £.

“Random Chapter” appears on the screen,

and chapters within the title will be played

back in random order.

“Random” appears on the screen, “RDM”

appears in the display, and playback

begins.

I To change tracks during random play

• Press ¢ or RANDOM and the next randomly selected

track starts playing.

• Press 4 and playback of the current track starts again

from the beginning.

Random playback of titles

Press RANDOM twice, then press

ENTER or £.

“Random Title” appears on the screen, and

titles will be played back in random order.

I To stop random play

“RDM” appears in the display.

Press CLEAR. This returns you to normal playback of

chapters/tracks in order from the chapter/track currently

playing.

I To change titles or chapters during random

Notes

play

• With Video CDs, random play is not possible during playback

when the menu is displayed (PBC playback). To perform random

play, start playback without displaying a menu by pressing a track

number button while in the stop mode, and then press RANDOM.

• Random play of programmed tracks or chapters is not possible.

• Repeat playback of random playback is not possible.

• You cannot use random play while using MP3 navigator.

• Random playback may not be possible with some DVDs.

• Press ¢ or RANDOM and the next randomly selected title

or chapter starts playing.

• Press 4 and playback of the current title or chapter starts

again from the beginning.

I To stop random play

Press CLEAR. This returns you to normal playback of

chapters in order from the chapter currently playing.

Notes

• Random play of programmed chapters is not possible.

• Random playback may not be possible with some DVDs.

• Repeat playback of random playback is not possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Audio/

Subtitle Language

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

AUDIO

SUBTITLE

CLEAR

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

RANDOM

DOWN

TIMER

SHIFT

---

TOP MENU

TV VOL

Before operating the

remote controller

Press SHIFT.

POWER

INPUT

TV CH

DVD

SETUP

RETURN

SHIFT

TV VOL

TV MUTING

REPEAT

STEP/SLOW

This switches the functions

of buttons. Press the desired

button within 10 seconds

after pressing this button.

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

DVD

Changing the Audio Language (Multi-

Language Function)

Selecting a Subtitle Language

(Multi-Language Subtitles)

Dolby Digital, PCM, and other audio data can be recorded on

DVDs in a number of languages or audio tracks, letting you

choose the desired language or audio.

You can select a desired subtitle language with DVDs that

have subtitle data in multiple languages recorded on them.

SUBTITLE

Press SUBTITLE repeatedly during

playback.

AUDIO

Press AUDIO repeatedly to select

the desired language.

Pressing SUBTITLE once displays the

SW MODE

Pressing AUDIO once displays the

currently selected language. Subsequent

presses rotates through the audio

languages available on the DVD.

currently selected subtitle language.

Subsequent presses rotates through the

subtitle languages available on the DVD.

Subtitle :1 English

Subtitle :2 Spanish

Dolby Digital

5.1CH

Dolby Digital

5.1CH

: 2 Spanish

Audio

: 1 English

Audio

HELLO!

HOLA!

Notes

• The subtitle language cannot be switched if the subtitle language

is not recorded, or if only one language is recorded.

• Switching the subtitle language may not be possible with some

discs. In this case, the

• To clear subtitles during playback, press SUBTITLE and then

press CLEAR, or press SUBTITLE until [Off] appears.

• For some discs, subtitle language selection can be made using

the menu on the DVD. In this case, press MENU to display the

DVD menu screen and then make your selection.

• You cannot switch languages if there is only one language

recorded on the disc.

• Switching the audio language may not be possible with some

titles. In this case, the

• For some titles, selection can be made using the DVD menu.

In these cases, press MENU to display the DVD menu screen

and then make your selection.

mark will be displayed.

•

When you erase the resume position or replace a disc, the DVD

receiver returns to the automatic setting in the setting menu (page

75).

•

When you erase the resume position or replace a disc, the DVD

Receiver returns to the automatic setting in the setting menu (page

76)

VCD

MP3

I Changing Audio Type

For enjoyment of karaoke or similar format Video CDs and MP3s it is

possible to select stereo audio, or either right or left channel mono

depending on the requirements of the source.

Press AUDIO repeatedly during playback to switch the audio

type.

Audio output changes from [1/L] (Left channel) to

[2/R] (Right channel) to [Stereo].

Audio

: 2/R

Audio

: 1/L

Audio

: Stereo

Note

With karaoke and other discs, set the appropriate audio type for

singing and accompaniment after referring to information on the disc

jacket or accompanying material.

Download from Www.Somanuals.com. All Manuals Search And Download.

Continuing Playback from a

Specified Location (Last Memory)

The Last Memory function is convenient when you want

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

STANDBY

LAST M

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

CLEAR

IPM

SETUP

RANDOM

DOWN

TIMER

SHIFT

---

TOP MENU

TV VOL

Before operating the

to continue viewing a disc from the point where you were

watching before. Unlike the resume function, the Last

Memory function is effective even if the DVD is removed

from the DVD receiver (Last Memory locations saved for

Video CDs are effective only if the disc remains loaded in

the DVD receiver).

POWER

INPUT

remote controller

Press SHIFT.

TV CH

DVD

SETUP

RETURN

SHIFT

TV VOL

TV MUTING

REPEAT

STEP/SLOW

This switches the functions

of buttons. Press the desired

button within 10 seconds

after pressing this button.

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Last Memory may not work reliably with some Video CDs

that feature PBC.

DVD

VCD

Resuming playback from where LAST

M was pressed

Memorizing a Last Memory location to

return to later

LAST M

Load a disc that has a Last Memory

Press LAST M during play.

The “LAST” indicator lights on the DVD

receiver.

point memorized.

SP SETUP

Some DVDs will start playback

automatically when loaded. In this case,

press 7 to stop playback.

LAST M

Press LAST M while in the stop

STANDBY

Press STANDBY to turn the power

mode.

SP SETUP

to standby, or stop playback with 7.

The disc begins playback at the

memorized point.

Once memorized, the memorized point will

be recalled even if the power is turned off,

or if the disc is ejected. Points on up to 5

discs can be memorized, and those points

are recalled the next time any of the discs

are played back.

• Last Memory mode may not function for

some DVDs.

• You can use Last Memory for up to five

discs (after that the one used least

recently is deleted to make space for a

new one).

• A Last Memory point can be memorized

for only one Video CD at a time as the

function is only effective until the Video

CD is removed from the player.

• Even with a disc you have memorized

with Last Memory, playback begins at

the start of the disc if you press £.

• This function is for playback of DVDs or

Video CDs only. You cannot use it with

CDs and MP3s.

I To clear the Last Memory location

1 Load a disc that has a Last Memory point memorized.

Some DVDs will start playback automatically when loaded. In this

case, press 7 to stop playback.

2 Press LAST M while in the stop mode.

The disc begins playback at the memorized point.

3 Once the picture appears, press LAST M again.

4 While “Last Memory” is displayed on the screen, press

CLEAR.

The “LAST” indicator disappears from the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

Condition Memory/Selecting

the Camera Angle

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

COND.M

ANGLE

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

CLEAR

IPM

SETUP

RANDOM

DOWN

TIMER

You can store in memory settings for DVDs you often

SHIFT

---

TOP MENU

TV VOL

Before operating the

watch. Settings remain in memory even if you remove the

disc from the DVD receiver, or switch power to the DVD

receiver to standby. If you load a disc that has its

settings memorized, “COND. MEM” appears in the

display. When you start playing the disc, the memorized

settings are automatically recalled.

POWER

INPUT

remote controller

TV CH

DVD

SETUP

RETURN

SHIFT

Press SHIFT.

TV VOL

TV MUTING

REPEAT

STEP/SLOW

This switches the functions

of buttons. Press the desired

button within 10 seconds

after pressing this button.

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

DVD

Viewing from a Desired Camera Angle

(Multi-Angle)

Memorizing Settings for DVDs

COND.M

Press COND.M during playback.

Settings are memorized for the disc

You can select a camera angle when viewing DVDs with

the multi-angle option.

TEST TONE

currently playing.

The following six settings are memorized:

On Screen Display (page 74)

Video Adjust (page 72)

Press ANGLE during playback.

The camera angle changes each time you

press the button.

ANGLE

DISTANCE

Camera-Angle (this page)

Angle

: 1/4

Angle

: 2/4

Multi-language (page 63)

Multi-Language subtitles (page 63)

Parental Lock Level (pages 79, 80)

I When a disc that has memorized settings is

loaded

Angle

: 4/4

Angle

: 3/4

“Condition Memory” will appear on the screen, and the

previously memorized settings will be selected.

I Erasing the recorded contents

Load a disc that has memorized settings, and press CLEAR

while “Condition Memory” is being displayed. The disc’s

recorded data will be erased.

Notes

• You can use the Multi-Angle function only with discs featuring

recordings of images shot from different camera angles.

• For some discs, selection can be made using the DVD menu. In

this case, press MENU to display the DVD menu screen and then

make your selection.

Notes

• Settings are stored in memory for use any time.

• You can use Condition Memory for up to 15 discs (after that the

one used least recently is deleted to make space for a new one).

• If you make changes to any of the settings memorized in

Condition Memory, press COND. M during playback to memorize

new settings.

• If you change the camera angle during still playback, the DVD

Receiver resumes normal playback.

I To check whether or not a disc is recorded

with angles

• Switching of the multi-language mode etc., is automatic on some

discs.

The jackets of discs that are recorded with angles will be marked

with

. When locations on discs that are recorded with angles are

indicator can be displayed.

played back, the

To cancel the angle mark, set [Angle Indicator] to [Off] in the Setup

screen Video menu described in the section below (page 74).

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Disc Information

Use DISPLAY to get current information about the disc

currently loaded.You can get information about the titles

and chapters on a DVD or tracks on a Video CD or CD or

folders and tracks on a MP3. When viewing DVDs, you

can also check the digital bitstream transmission rate.

DVD

VCD

MP3

Viewing Disc Information during while a disc is playing

Video CD (with PBC disabled)

DISPLAY

Press DISPLAY during while a disc

is playing. Press DISPLAY

repeatedly to change the

current track number/

total number of tracks

Video CD’s total

elapsed time

Play

All

3/12

–59.26/

10.53

70.19

information being displayed.

The disc information is displayed

superimposed over the video image on the

screen.

Video CD’s

remaining time

Video CD’s

remaining time

Video CD’s total

time

Press and hold DISPLAY to display

the time remaining on the disc.

When you release the button, the

information disappears.

current track

number

Video CD’s total

elapsed time

current track

number

Play

Track

10.53

5.23

3.56/

elapsed time of

current track

total time of

current tracks

elapsed time of

current track

The display changes for each type of disc as follows each time

the button is pressed.

current track

number

Video CD’s total

elapsed time

current track

number

DVD

current title/

chapter number

elapsed time of

current title

number

Play

Track

10.53

5.23

1.27/

Play

Title

3–29

–51.06/ 101.04

49.58

remaining time of

current track

total time of

current tracks

remaining time of

current track

remaining time of

current title

remaining time of

current title

remaining total

time of current title

Display off

current title/

elapsed time of

current title

current title/

chapter number

elapsed time of

current track

number

Play

Chapter

3–32

0.21/

54.53

1.51

current track

number

Play

Track

0.03

3.32

elapsed time of

current chapter

elapsed time of

current chapter

elapsed total time

of current chapter

–3.29/

remaining time of

current track

remaining total time

of current tracks

remaining time of

current track

current title/

chapter number

current title/

chapter number

elapsed time of

current title

total time of

current track

number

Play

Chapter

3–32

–1.30/

54.53

1.51

Play

All

1/10

–66.20/

1.13

66.32

remaining time of

current chapter

remaining total time

of current chapter

remaining time of

current chapter

CD’s remaining

time

CD’s total time

CD’s remaining

time

current title/

chapter number

elapsed time of

current title

Play

Tr. Rate:

3–32

54.53

6.3

Display off

transmission rate

level

transmission rate

level meter

transmission rate

level

Display off

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

---

TOP MENU

TV VOL

POWER

INPUT

TV CH

DVD

RETURN

SETUP

TV VOL

TV MUTING

REPEAT

2/3

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

DISPLAY

MUTING

DVD

VCD

MP3

Viewing Disc Information while a disc

is stopped

MP3

current track number/

total number of tracks

in folder

elapsed time of

current track

DISPLAY

Press DISPLAY while a disc is

stopped to display DVD title and

chapter information or Video CD

and CD track information or MP3

folder and track information. Press

DISPLAY again to turn the display

off.

Play

Track

16/20

TRACK1~1

0.05

track name

current folder

number/total

elapsed time of

current track

number of folders

Information about the titles and chapters or

folders and tracks on a disc is displayed.

When the information exceeds the space

on the screen, use the cursor buttons

(2/3) to move to other screens.

Play

2/10

0.05

Folder

FOLDER~1

folder name

DVD

Information: DVD

current folder number/

current track number

elapsed time of

current track

Title

Chapter

Title

Chapter

1 ~ 10

1 ~ 13

1 ~ 5

current track number

1 ~ 30

1 ~ 21

1 ~ 46

1 ~ 12

1 ~ 8

Play

Track

2–16

–2.25

0.05

2.30

1 ~ 4

1 ~ 8

remaining time of

current track

remaining time of

current track

total time of

current track

DISPLAY

Exit

1/2

Titles and number of chapters in each title

Video CD and CD

current folder number/

current track number

elapsed time of

current track

current folder number/

current track number

Information: Compact Disc

Total time

72 . 04

Track

Play

2–16

0.05

Track

Time

Tr. Rate:

128kbps

5 . 23

4 . 55

6 . 13

5 . 45

5 . 10

6 . 51

3 . 18

6 . 50

4 . 16

3 . 22

transmission rate level

DISPLAY

1/2

Exit

Display off

Total playing time of disc, tracks and track times

MP3

Notes

Information: MP3

• Depending on the format and type of disc being used, not all

Folder

001

002

Track

1 ~ 9

1 ~ 11

1 ~ 3

Folder

Track

1 ~ 10

1 ~ 13

1 ~ 5

screens may be displayed.

• When playing Video CDs in PBC mode or unfinalized CD-Rs not

all the above information is displayed.

003

004

005

1 ~ 22

1 ~ 15

1 ~ 4

1 ~ 8

DISPLAY Exit

1/2

Folders and number of tracks in each folder

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the Function

Settings

The procedure on this page describes how to operate the

menus on the Setup screen.These menus are used to set

and adjust a number of system settings.The various

functions that can be adjusted are covered throughout

this manual.The procedure on this page provides a basic

outline for using the Setup screen menus.

DVD

VCD

MP3

Using the Setup Screen Menus

Press 0 or £ on the unit to select

DVD input.

Use the cursor button (3) to enter

the setting options.

Example (Other than European model)

Language

Video1 V2

General

TV Screen — 16:9(Wide

Component Video — Interlace

)

Progressive

Auto Progressive

Select Interlace or Progressive

output Component Video

ENTER

SETUP

Move

Exit

Select

DVD

SETUP

Press DVD SETUP.

The Setup screen appears.

Example (Other than European model)

• Not all menu options can be changed

while a disc is playing. In these cases,

the options appear grayed out on the

screen and cannot be adjusted. To

change these settings, press 7 first

before pressing DVD SETUP.

Language

Video1 V2

General

TV Screen — 4:3(Letter Box)

Component Video — Interlace

• Operating the menu after pressing 7

may cancel the resume function.

Setup Video

Adjust video format/quality

SETUP

Move

Exit

• Some menu options are not immediately

effective if set while a disc is playing. To

make these settings effective, stop

playback and then start again, or

change the settings while the disc is

stopped.

Use the cursor buttons (2/3) to

select the menu you want.

As each menu is selected with the cursor,

the settings appear below the menu

heading.

Use the cursor buttons (5/∞) to

select a new setting and press

ENTER to set the new setting in

memory.

Press RETURN or the cursor button (2) to

exit the options without making any

changes.

Use the cursor button (∞) to enter

the menu.

The top item within the menu becomes

highlighted.

Example (Other than European model)

Language

TV Screen

Video1 V2

General

4:3(Letter Box)

RETURN

Component Video

4:3(Pan&Scan)

16:9(Wide)

Press RETURN or the cursor button

(2) to go back to the main menu bar

to select another menu.

Select your display preference

SETUP

ENTER

Move

Exit

Select

DVD

SETUP

Press DVD SETUP to close the

Setup screen.

The Setup screen closes.

Use the cursor buttons (5/∞) to

select the setting you want to

change.

The options available for each setting

appear to the right when the setting is

selected. The current setting appears with

the setting indicator lit.

Notes

• If you turn off the DVD Receiver during setup, the settings are

canceled. Press DVD SETUP to finish the setup.

• The memorized resume position may be erased by setup.

• The Setup screen always shows the latest settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

SHIFT

MODE

RECEIVER

---

2/3/5/∞

ENTER

TOP MENU

TV VOL

INPUT

POWER

TV CH

Press MODE

DVD

RETURN

SETUP

RECEIVER first.

RETURN

DVD SETUP

TV VOL

TV MUTING

REPEAT

STEP/SLOW

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Changing to the Setup Screen “Expert”

Menu Mode

I When setting up for the first time

The Setup screen menus are divided into two levels, [Basic]

and [Expert], to make this unit more convenient to operate for

different levels of users. The [Basic] menu mode contains

functions that may be considered necessary for the basic

operations of this DVD Receiver and helpful on-screen

It is recommended to set up the DVD receiver using the Setup

Navigator (page 32). If you selected [Auto Start Off] when the

Setup Navigator appeared, you may still set up the DVD

Receiver using the Setup Navigator in the General menu

screen.

information identified by the

mark. The [Expert] menu mode

If you choose not to use the Setup Navigator, be sure to make

the necessary settings in the Setup screen Video 1, Video 2

and Language menus as described on the following pages.

Some DVDs start playing automatically when loaded in the

DVD Receiver. If a DVD has been loaded, be sure to press 7

before proceeding.

adds to the [Basic] menu mode additional functions of the

DVD receiver that can be adjusted to further personalize

performance of the DVD receiver.

In this manual, functions that are contained in the [Expert]

menu mode are identified by the

icon.

Expert

Make changes to the [Setup Menu Mode] setting in the Setup

screen General menu.

Note

The next time you press DVD SETUP, you’ll see the menu screen

V2 Language General

Video1

that you exited from last time.

Setup Menu Mode — Expert

Setup Navigator

Basic

Parental Lock — Off (us)

I How to interpret the setting indicator colors

in the Setup screen menus

Change menu mode

When setting up the system, or when making adjustments, it is

convenient to know what settings are applicable to the

different disc formats. When the settings appear for each

menu option, the currently selected setting appears with the

setting indicator highlighted in one of three colors: blue, green

or yellow. These colors correspond to what formats the menu

option effects as shown in the table below.

SETUP

ENTER

Move

Select

Exit

Settings: Expert

Basic (Factory setting)

Note

On-screen information only appears in the [Basic] menu mode .

Color of indicator

Blue

Disc format(s)

DVD only

Yellow

Green

DVD/Video CD

All compatible formats

Note

If a setting applicable only to DVDs is changed while a Video CD or

CD is loaded, a blue DVD icon appears in the upper right hand

corner of the screen to indicate that the setting is not applicable to

the currently loaded disc. The setting will be effective the next time a

DVD is loaded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the Function Settings

Setting the TV Screen Size

The width-to-height ratio of conventional TVs is 4:3, while the

width-to-height ratio of wide screen and high-definition TVs is

16:9. This width-to-height ratio is called the aspect ratio.

When viewing software recorded in different aspect ratios, the

image’s height to width ratio can be switched to match the TV

or monitor being used.

Make changes to the TV screen size in the [TV Screen] setting

in the Setup screen Video 1 menu. Please note that changes

to the [TV Screen] setting cannot be made when a disc is

playing. Stop playback of the disc before attempting to make

any changes.

When viewing a wide screen TV or monitor

DVD screen size format

Setting and Appearance

Wide screen format DVD

Please note that there are some

wide screen letter box formats

that place black bars at the top

and bottom of the screen. This is

not a malfunction.

“Wide” setting

Standard screen format DVD

When viewing a standard screen

format DVD on a wide screen

TV, black bars may be

automatically placed at the side

of the screen to adjust to the

DVD format.

Example (Other than European model)

Language

Video1 V2

General

TV Screen — 4:3(Letter Box)

Component Video 4:3(Pan&Scan)

“Wide” setting

16:9(Wide

)

Standard screen format DVD

(unnatural stretched effect)

If you are viewing a standard

screen format DVD on a wide

screen TV, the picture may

appear “stretched” on the

screen. To remedy this

condition, change your wide

screen TV to display a standard

(4:3) screen. Refer to the

instructions supplied with your

wide screen TV or monitor for

more information.

Select your display preference

SETUP

Move

Exit

Settings: 4:3 (Letter Box)

4:3 (Pan & Scan)

16:9 (Wide) (Factory setting)

“Wide” setting

Notes

• If [Standard (4:3)] is selected in the Setup Navigator screen, [4:3

(Letter Box)] is selected on this screen. If you prefer the

pan&scan format, change the settings on this screen.

• Whether the aspect can be switched or not depends on the disc.

Please refer to the information written on the disc jacket, etc.

• Some discs may not include the screen format selected in the [TV

Screen] setting. When this occurs, the standard TV screen format

available on the disc is automatically selected.

When viewing a standard size TV or monitor

DVD screen size format

Setting and Appearance

Wide screen format DVD

The Letter box presentation

places black bars at the top and

bottom portions of the screen to

provide the full wide screen

presentation of a movie on a

standard TV (4:3 aspect ratio).

I Differences in screen sizes and DVD

“Letter Box” setting

formats

The number of screen size formats currently available can be

somewhat confusing. If set incorrectly, the video presentation

may not appear as it should. The following diagrams and

descriptions are intended to help you set your TV screen size

in a way that will allow you to fully enjoy the digital video of

DVD.

Wide screen format DVD

The Pan & Scan presentation

crops both sides of the wide

screen presentation to use the

full standard TV screen.

“Pan & Scan” setting

The settings in the [TV Screen] setting are perhaps most

applicable when the DVD you are watching is programmed in

the wide screen format. If you have a standard TV, select

either [4:3 (Letter Box)] or [4:3 (Pan & Scan)] based on your

personal preference. If you have a wide screen TV, select

[16:9 (Wide)].

Standard screen format DVD

If you have a standard TV, the

standard screen format will be

presented regardless of the

setting.

Any setting

Wide screen format DVD

(unnatural squeezed effect)

If you are viewing a wide screen

format DVD on a standard TV

and the [TV Screen] setting is

set to [16:9 (Wide)], the picture

may appear “squeezed” on the

screen. To remedy this

condition, select either [4:3

(Letter Box)] or [4:3 (Pan &

Scan)].

“Wide” setting

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Video 1 Options

Connecting to a progressive scan-

I Setting the Video Output Format for the AV

compatible TV (Other than European model)

CONNECTOR (European models)

Compared to a standard interlaced TV picture, a progressive

scan TV is capable of stable, flicker-free images.

Set only if you connected the COMPONENT VIDEO OUT

jacks to a progressive scan-compatible TV or monitor.

Make changes to the [Component Video] setting in the Setup

screen Video 1 menu.

When connections are made to the AV CONNECTOR jack on

the DVD receiver via a SCART cable, it is possible to select

the video format that is compatible with your TV or monitor.

Select [Video] to have a composite video signal output, [S-

Video] to have an S-video signal output, and [RGB] to have an

RGB signal output. For more information on which format is

most appropriate, refer to the instructions supplied with your

TV or monitor.

Language

Video1 V2

General

TV Screen — 16:9(Wide

)

Component Video

Interlace

Make changes to the [Video Out] setting in the Setup screen

Video 1 menu.

Progressive

Auto Progressive

Language

Video1 V2

General

Select Interlace or Progressive

output Component Video

TV Screen — 16:9(Wide

Video Out — Video

S-Video

)

SETUP

Move

Exit

RGB

Settings: Interlace (Factory Setting)

Use this setting with regular TVs that are not

Set AV CONNECTOR video format

SETUP

compatible with progressive scan. Check the TV’s

Move

Exit

instruction manual if you are not sure about this.

Settings: Video (Factory setting)

Progressive

S-Video

RGB

Use this setting with TVs and monitors that have

progressive scan component video inputs. The

PRGV indicator lights up. Check the TV’s

instruction manual if you are not sure about this.

Expert

I Switching the S-Video Output

You can switch the kind of S-Video signal output from the S-

Video outputs. If you connected your TV with an S-Video cord,

in rare cases the TV picture may appear stretched. In this

case switch the output from [S2] to [S1].

Make changes in the [S-Video Out] in the Setup screen Video

1 menu in the [Expert] menu mode (page 69).

PROGRESSIVE indicator

PROGRESSIVE SCAN

Theater-Dimensional

IPM

Auto Progressive

Example (Other than European model)

Switches to progressive scan when 16:9 DVDs are

played,4:3 DVDs uses interlace setting. Your TV/

monitor must be compatible with progressive scan

to use this setting.

Language

Video1 V2

General

TV Screen — 16:9(Wide)

Component Video — S1

S-Video Out — S2

Screen Saver — On

Tip

If this DVD Receiver is set to output progressive-scan video, it’s

possible that the picture will appear stretched when playing discs

recorded in 4:3 format. This happens when the TV’s aspect ratio is

set at 16:9. To see the picture in its correct aspect ratio, change the

TV setting to 4:3.

SETUP

Move

Exit

Settings: S1

S2 (Factory Setting)

If your TV can not be switched between 4:3 and 16:9, set this DVD

Receiver to [Interlace] or [Auto Progressive]. In Auto progressive

mode, 4:3 discs will be played in Interlace mode, while discs that are

recorded in both 4:3 and 16:9 will play in interlace mode during the

4:3 sections, and in progressive mode during the 16:9 parts. Switch

your TV’s aspect ratio to the most suitable setting (for more details,

see the manual that came with your TV). When set to [Auto

progressive], you may see picture disturbance when this DVD

receiver (and the TV) switches between progressive and interlace

modes. This is not a malfunction of either this DVD receiver or the

TV. Picture disturbance should only occur when switching from a

menu screen to the main feature, for example.

I Turning the Screen Saver On and Off ^Expert

As a protective function against residual images on the TV

screen or monitor, a phenomenon referred to as “screen burn”,

the screen saver appears when the same screen has been

displayed for a length of time. By default, the screen saver is

turned on. However, the screen saver function can be turned

on and off at your discretion.

Make changes to the [Screen Saver] setting in the Setup

screen Video 1 menu in the [Expert] menu mode (page 69).

Example (Other than European model)

Notes

Language

Video1 V2 Language General

Video1 V2

General

• If you connect a TV that is not compatible with a progressive scan

signal and choose one of the progressive scan settings, you will

not be able to see any picture at all. With your TV connected

using either the composite or S-Video terminals, choose the

[Interlace] setting in the [Component Video] menu.

TV Screen — 16:9(Wide)

Component Video — Interlace

S-Video Out — S2

Screen Saver

Off

Expert

SETUP

Move

Exit

denotes more detailed settings. If the item is not displayed,

please refer to page 69 to display it.

Settings: On (Factory setting)

Off

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the Function Settings

Adjusting the Video Quality

You can either select a preprogrammed setting designed to

match certain program types or make adjustments to match

your own preferences and save them in the DVD receiver’s

memory.

Make changes to the [Video Adjust] setting in the Setup

screen Video 2 menu.

I Adjusting the picture quality settings

– To create your own setting (1)

1 Use the cursor button (3) to select [Start] then press

ENTER.

Language

General

Video2

Background — Gray

Video Adjust — Start

Interlace Video Memory Select

Interlace Video Setup

Picture Quality Controls

2 Use the cursor button (∞) to select [Video Setup] then

press ENTER.

SETUP

Move

Exit

I Selecting a preprogrammed setting

1 Use the cursor button (3) to select [Start] then press

ENTER.

Interlace Video Memory Select

Interlace Video Setup

Setting items vary depending on the settings in the Setup

screen Video 1 menu.

3 Use the cursor buttons (2/3) to select the setting to [On] or

[Off].

Interlace Video Memory Select

Interlace Video Setup

2 Press ENTER.

DNR

off

max

ENTER

DISPLAY

Check

Move

Select

4 Use the cursor buttons (5/∞) to select the setting to adjust.

You can adjust any or all of the following picture quality factors:

Standard

P.Memory 1

Cinema

Animation

P.Memory 3

<Other than European model when set to [Progressive] or

[Auto Progressive] in the Setup screen Video 1 menu.>

P.Memory 2

DNR

Standard (Factory Setting)

Controls the amount of signal noise in the luminance component

Presents the video with no effect added.

of the video signal.

Sharpness

Adjusts the sharpness of the mid-frequency (less detailed)

elements in the picture. (This setting is only effective when [Fine

Focus] is [On].)

Detail

Switch on to reveal greater detail (higher resolution) in the

picture.

Cinema

Delivers a cinema-like picture.

Animation

Provides images with bright clear colors.

Memory 1, Memory 2, and Memory 3

(P.Memory 1, P.Memory 2, and P.Memory 3)

These are user programmable settings. See “Adjusting the

picture quality settings” on this page and page 73 for more

information.

Chroma Delay

Adjusts how saturated colours appear.

3 Use the cursor buttons (2/3/5/∞) to select one of the

preprogrammed picture quality settings.

If there is a DVD or Video CD playing, the effects of each setting

can be viewed while it is highlighted on the screen. This may be

useful in selecting an appropriate setting.

4 Press ENTER.

Gamma

Adjusts the brightness of the darker images in the picture.

Prog. Memory

Program the current settings.

The new selection is set.

Notes

• Each picture quality setting is defined by a number of individual

settings, described in “Adjusting the picture quality settings” on

this page and page 73.

• Depending on the disc and the TV/monitor, you may not see the

effect clearly.

Expert

denotes more detailed settings. If the item is not displayed, please refer to page 69 to display it.

Download from Www.Somanuals.com. All Manuals Search And Download.

<Other than European model when set to [Interlace] setting

in the Setup screen Video 1 menu and European model>

Fine Focus

Switch [On] to reveal greater detail (higher resolution) in the

picture.

I Adjusting the picture quality settings

– To create your own setting (2)

1 Use the cursor button (3) to select [Start] then press

ENTER.

Contrast

Adjusts the contrast of the elements in the picture.

Sharpness

Adjusts the sharpness of the high-frequency (detailed) elements

in the picture. (This setting is only effective when [Fine Focus] is

[On].)

Interlace Video Memory Select

Interlace Video Setup

Chroma Level

Adjusts how saturated colours appear.

Hue

Adjusts the overall colour balance between red and green. (This

is only effective when the DVD receiver is connected using the

VIDEO OUT or S-VIDEO OUT jacks.)

Memory (Interlace Memory)

2 Use the cursor button (∞) to select [Video Setup] and press

ENTER.

3 Press DISPLAY.

DNR

Sharpness

Detail

Chroma Delay

Gamma

Memory

off

max

Off

min

green

max

red

Programs the current settings.

Off

5 Use the cursor buttons (2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes

immediately.

4 Use the cursor buttons (5/∞) to select the setting and use

the cursor buttons (2/3) to adjust the settings.

Adjust these while a disc is playing to see the effect of changes

immediately.

5 To memorize the setting, select Memory 1, 2, 3, then press

ENTER.

6 Repeat steps 4 and 5 to make adjustments to other

settings.

If you would like to save the settings in the DVD receiver’s

memory, be sure to select either [1], [2], or [3] in the [Prog.

Memory] or [Memory (Interlace Memory)] setting to establish

which memory location to save the new settings in. Please note

that if you select a location where settings have already been

saved, the old settings will be replaced by the new ones.

The previous setting will be erased.

Prog. Memory

Move

Off

Select

DISPLAY

ENTER

Check

7 When you are finished making adjustments, press ENTER

to establish the new settings.

Tip

Progressive scan video has a greater scanning line density than

standard interlace video. Graininess is minimized and you can enjoy

a soft picture even with a big screen. *1

Progressive-scan compatible TVs also have on board progressive

circuits. If you prefer, choose “Interlace” in this unit’s setup screen to

view progressive-scan video adjusted by the TV’s on board circuits.

If the TV is incompatible with this unit’s progressive output, picture

disturbance occurs. For this type of problem, switch this unit’s output

to Interlace.

*1 When using a progresive-scan compatible TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the Function Settings

Setting the Video 2 Options

I Changing the Background of the Screen

You can select a background to appear when the DVD

Receiver is in the stop mode.

Make changes to the [Background] setting in the Setup screen

Video 2 menu.

I Setting the Position of the On-screen

Display ^Expert

When watching conventional software on a wide screen TV,

the operation display is at the very top of the screen, and may

be difficult to see. Changing the position of the display lets you

see operation indicators clearly even on a wide screen TV.

Alternatively, you can choose to turn them off completely with

the [Off] setting.

Language

General

Video2

Background — Gray

Video Adjust — Black

Make changes in the [On Screen Display] in the Setup screen

Video 2 menu in the [Expert] menu mode (page 69).

Put Background Selections

Language

General

Video2

SETUP

Move

Exit

Background — Gray

Video Adjust

Still Picture — Auto

Settings: Gray

Black

On Screen Display — Position-Wide

Angle Indicator

Position-Normal

Off

I Selecting the Type of Paused Image to

SETUP

Expert

Move

Exit

Display

This function lets you view a clear still-image when DVD

playback is paused.

Settings: Position-Wide

Position-Normal (Factory setting)

Make changes in the [Still Picture] setting in the Setup screen

Video 2 menu in the [Expert] menu mode (page 69).

Off

Note

Language

General

Video2

This setting is only effective with DVDs that contain a 4:3 aspect

ratio video presentation.

Background — Gray

Video Adjust —

Still Picture — Field

On Screen Display

Angle Indicator

Frame

Auto

Expert

I Turning the angle indicator on and off

When a picture recorded in different angles is played back

is displayed on the screen. This setting lets you see clearly

whether the playback picture is recorded in multiple angles or

not.

Turn the angle indicator on or off in the [Angle Indicator]

setting in the Setup screen Video 2 menu in the [Expert] menu

mode (page 69).

SETUP

Move

Exit

Settings: Field (Picture shake will be eliminated during a

paused picture.)

Frame (Select to obtain higher picture quality.)

Auto (Selects [Field] or [Frame] automatically

according to the disc.) (Factory setting)

Language

General

Video2

Background — Gray

Video Adjust

Still Picture — Auto

On Screen Display — Position-Normal

Angle Indicator — On

Off

SETUP

Move

Exit

Settings: On (

is displayed) (Factory setting)

Off (Not Displayed)

Note

Even when the [Angle Indicator] setting is set to [Off], the

indicator in the display panel of the DVD Receiver lights during multi-

angle playback. Therefore, it is possible to know when the multi-

angle function can be used without having to display the icon on the

screen.

Expert

denotes more detailed settings. If the item is not displayed, please refer to page 69 to display it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Language Options

DVDs have the capacity to contain a great deal of audio

information, which includes the ability to hold up to 8 different

language tracks and subtitle information in as many as 32

different languages. This section outlines the variety of audio

language and subtitle options available with this DVD receiver.

Please note that if you have completed the Setup Navigator,

the audio and subtitle language options have automatically

been set in accordance with the [OSD Language] (the

language that appears on the screen).

I Selecting an audio language preference

The audio language that you normally listen to can be

selected from the various audio languages on a DVD. Even

when the audio language is changed during playback by

pressing AUDIO, the language selected at this setting will be

selected as the default when the DVD is changed.

Make changes to the [Audio Language] setting in the Setup

screen Language menu.

You cannot make this setting with a disc playing.

Note

(Other than Asian models)

(Asian models)

DVDs differ in content and do not all contain multiple language or

subtitle information. Therefore making settings in this section may

have no effect on some DVDs.

General

Video1 V2 Language

OSD Language

Audio Language

Subtitle Language

Auto Language

English

OSD Language

Audio Language

Subtitle Language

Auto Language

English

—

French

German

Italian

English

Chinese

Other

I Setting the On-screen Display (OSD)

Spanish

Other

Language

Setup audio language

SETUP

Move

Exit

Move

Exit

This setting is used to establish the language that operation

indicators and on-screen messages and operations display.

Change this setting in the Setup screen Language menu [OSD

Language] setting.

Settings: English (Factory setting)

French

German

Italian

(Other than Asian models)

(Asian models)

General

Video1 V2 Language

General

Video1 V2 Language

Spanish

OSD Language — English

Audio Language

Subtitle Language — English

Auto Language — On

OSD Language — English

Other (For details on how to select other

languages, see “When [Other] is selected” on page

77.)

Audio Language

Subtitle Language

Auto Language

français

Deutsch

Italiano

Español

Select the On Screen Language

Asian models only

Select the On Screen Language

English (Factory setting)

Chinese

Other

SETUP

Move

Exit

Move

Exit

Settings: English (Factory setting)

français

Deutsch

Italiano

Español

Note

The menu settings may be different from those shown above.

Asian models only

English (Factory setting)

Notes

• The menu settings may be different from those shown above.

• The [OSD Language] setting is factory set to [English]. If you

want English to be displayed, it is not necessary to adjust this

setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the Function Settings

Setting the Language Options

I Selecting a subtitle language preference

The subtitle language that you will normally display can be

selected from the subtitles programmed on a disc. Even when

the subtitle language is changed during playback by pressing

SUBTITLE, the language selected at this setting will be

selected when the disc is changed.

Make changes to the [Subtitle Language] setting in the Setup

screen Language menu.

I Selecting a DVD menu language preference

Expert

In addition to containing different audio languages, DVD may

also contain menu screens in different languages as well.

Setting a DVD language preference, sets the selected

language as a default when DVDs with menu information in

that language are encountered.

Selecting [w/ Subtitle Language] automatically assigns the

language selected in the [Subtitle Language] setting.

Make changes to the [DVD Language] setting in the Setup

screen Language menu in the [Expert] menu mode (page 69).

You cannot make this setting with a disc playing.

(Other than Asian models)

(Asian models)

General

Video1 V2 Language

OSD Language

Audio Language

Subtitle Language

Auto Language

English

French

German

Italian

Spanish

Other

OSD Language

Audio Language

Subtitle Language

Auto Language

English

—

English

Chinese

Other

—

(Other than Asian models)

(Asian models)

General

Video1 V2 Language

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

w/ Subtitle Language

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

English

w/ Subtitle Language

English

—

English

French

German

Italian

Spanish

Other

Setup disc's subtitle language

SETUP

Move

Exit

Move

Exit

Chinese

Other

Settings: English (Factory setting)

French

German

Italian

SETUP

Move

Exit

Move

Exit

Settings: w/ Subtitle Language (Factory setting)

Spanish

English

Other (For details on how to select other languages,

French

see “When [Other] is selected” on page 77).

German

Italian

Spanish

Asian models only

English (Factory setting)

Chinese

Other

Other (For details on how to select other

languages, see “When [Other] is selected” on page

77).

Note

Asian models only

The menu settings may be different from those shown above.

w/ Subtitle Language (Factory setting)

I Setting Auto Language to control subtitle

and audio language based on program

content

When the Auto Language function is used, foreign movies are

shown with the original audio soundtrack and subtitles in the

language selected in the [Subtitle Language] menu option.

Domestic films are shown with the original audio soundtrack

and no subtitles. (This setting may not be effective with all

DVDs.)

English

Chinese

Other

Notes

• The menu settings may look different from the one shown above.

• If this function is not effective, the languages that can be selected

may also be selected in the DVD menu. Press MENU to open the

DVD menu and make your selection accordingly.

Make changes to the [Auto Language] setting in the Setup

screen Language menu.

You cannot make this setting with a disc playing.

General

Video1 V2 Language

OSD Language

Audio Language

Subtitle Language

Auto Language

English

—

English

Off

Play dialog, etc. in original language

Subtitle ON with foreign audio

SETUP

Move

Exit

Settings: On (Factory setting)

Off

Note

The Auto Language function operates only when this function

is set to [On], and the language set for the [Audio Language]

and [Subtitle Language] settings is the same.

Expert

denotes more detailed settings. If the item is not displayed, please refer to page 69 to display it.

Download from Www.Somanuals.com. All Manuals Search And Download.

I Selecting subtitles, assist subtitles or no

I When [Other] is selected

When you want to select one of the 136 languages as the

main audio language, follow the steps below when the

following screen appears.

subtitles ^Expert

Use this function to turn the subtitles on or off. Additionally,

some DVDs provide assist subtitles that provide additional

explanations of scenes in addition to the standard subtitles for

viewers who are hard of hearing. Select [Assist Subtitle] to

display these subtitles on DVDs where this function is offered.

Make changes to the [Subtitle Display] setting in the Setup

screen Language menu in the [Expert] menu mode (page 69).

You cannot make this setting with a disc playing.

A language code list can be found on page 78.

General

Video1 V2 Language

OSD Language

Audio Language

Subtitle Language

Auto Language

English

French

German

Italian

Spanish

Other

Setup audio language

General

Video1 V2 Language

SETUP

ENTER

Move

Select

Exit

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

English

—

1 Use the cursor buttons to select [Other] and press ENTER.

The language selection screen appears.

Off

General

Audio Video1 V2 Language

Audio Language

Assist Subtitle

SETUP

Move

Exit

List of Language

Code (0~2)

ja: Japanese

Settings: On (Factory setting)

Off

Setup audio language

Assist Subtitle

RETURN

ENTER

–/+

Move

Return

Exit

SETUP

Select

Notes

• If there is no subtitle information recorded on the DVD, no

subtitles are displayed even if this function is set to [On].

• This setting serves as a default as whether or not to display

subtitles. Even if this option is set to [Off], subtitles can be

displayed by pressing SUBTITLE. Similarly, if this option is set to

[On], the subtitles can be turned off by pressing SUBTITLE and

then CLEAR.

2 Use the cursor buttons (2/3) to select either “List of

Language” or “Code”.

3 If you select “List of Language”, use the cursor buttons

(5/∞) to select the language.

For languages which are only shown as a code, refer to

“Language Code List” on page 78.

List of Languages

ja: Japanese

I Forcing subtitles to be displayed ^Expert

Even when the subtitles are turned off, some DVDs will

nevertheless display them on the screen. This setting allows

you to select the language of the subtitles to be displayed with

this type of DVD.

Select [With Audio] to display the subtitles in the same

language as the currently selected [Audio Language]. Select

[Selected Subtitle] to display the subtitles in the language set

in the [Subtitle Language] setting.

If you select “Code”, use the cursor buttons (5/∞) to input

the numbers of the input code.

Use the cursor buttons (2/3) to change the position of the

cursor. You can also use the number buttons to enter the code.

Code (0~2)

Make changes to the [Subtitle Off] setting in the Setup screen

Language menu in the [Expert] menu mode (page 69).

You cannot make this setting with a disc playing.

General

Video1 V2 Language

4 Press ENTER to set the new language.

OSD Language

Audio Language

Subtitle Language

Auto Language

DVD Language

Subtitle Display

Subtitle Off

English

—

To exit the screen without making any changes, press RETURN.

English

With Audio

Selected Subtitle

—

SETUP

Move

Exit

Settings: With Audio

Selected Subtitle (Factory setting)

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the Function Settings

Language Code List

Language codes are used when setting the audio and subtitle

5-language preferences (pages 75-77).

Language

Input-code

Language

Input-code

Language

Input-code

Japanese (ja)

English (en)

French (fr)

1001

0514

0618

0405

0920

0519

2608

1412

1620

1922

1821

1115

0512

0101

0102

0106

0113

0118

0119

0125

0126

0201

0205

0207

0208

0209

0214

0215

0218

0301

0315

0319

0325

0401

0426

0515

0520

0521

0601

0609

0610

0615

0625

0701

0704

0712

0714

Gujarati (gu)

Hausa (ha)

0721

0801

0809

0818

0821

0825

0901

0905

0911

0914

0919

0923

1009

1023

1101

1111

Rhaeto-Romance (rm)

Kirundi (rn)

Romanian (ro)

Kinyarwanda (rw)

Sanskrit (sa)

Sindhi (sd)

1813

1814

1815

1823

1901

1904

1907

1908

1909

1911

1912

1913

1914

1915

1917

1918

1919

1920

1921

1923

2001

2005

2007

2008

2009

2011

2012

2014

2015

2018

2019

2020

2023

2111

2118

2126

2209

2215

2315

2408

2515

2621

Hindi (hi)

German (de)

Italian (it)

Croatian (hr)

Hungarian (hu)

Armenian (hy)

Interlingua (ia)

Interlingue (ie)

Inupiak (ik)

Spanish (es)

Chinese (zh)

Dutch (nl)

Sangho (sg)

Serbo-Croatian (sh)

Sinhalese (si)

Slovak (sk)

Slovenian (sl)

Samoan (sm)

Shona (sn)

Portuguese (pt)

Swedish (sv)

Russian (ru)

Korean (ko)

Greek (el)

Indonesian (in)

Icelandic (is)

Hebrew (iw)

Yiddish (ji)

Afar (aa)

Javanese (jw)

Georgian (ka)

Kazakh (kk)

Greenlandic (kl)

Cambodian (km)

Kannada (kn)

Kashmiri (ks)

Kurdish (ku)

Kirghiz (ky)

Somali (so)

Albanian (sq)

Serbian (sr)

Siswati (ss)

Sesotho (st)

Sundanese (su)

Swahili (sw)

Tamil (ta)

Abkhazian (ab)

Afrikaans (af)

Amharic (am)

Arabic (ar)

1112

1113

1114

1119

1121

1125

1201

1214

1215

1220

1222

1307

1309

1311

1312

1314

1315

1318

1319

1320

1325

1401

1405

1415

1503

1513

1518

1601

1612

1619

1721

Assamese (as)

Aymara (ay)

Azerbaijani (az)

Bashkir (ba)

Byelorussian (be)

Bulgarian (bg)

Bihari (bh)

Telugu (te)

Latin (la)

Tajik (tg)

Lingala (ln)

Thai (th)

Laothian (lo)

Lithuanian (lt)

Latvian (lv)

Tigrinya (ti)

Turkmen (tk)

Tagalog (tl)

Setswana (tn)

Tonga (to)

Bislama (bi)

Bengali (bn)

Tibetan (bo)

Breton (br)

Malagasy (mg)

Maori (mi)

Catalan (ca)

Corsican (co)

Czech (cs)

Macedonian (mk)

Malayalam (ml)

Mongolian (mn)

Moldavian (mo)

Marathi (mr)

Malay (ms)

Turkish (tr)

Tsonga (ts)

Tatar (tt)

Welsh (cy)

Twi (tw)

Danish (da)

Bhutani (dz)

Esperanto (eo)

Estonian (et)

Basque (eu)

Persian (fa)

Finnish (fi)

Ukrainian (uk)

Urdu (ur)

Maltese (mt)

Burmese (my)

Nauru (na)

Uzbek (uz)

Vietnamese (vi)

Volapük (vo)

Wolof (wo)

Nepali (ne)

Norwegian (no)

Occitan (oc)

Oromo (om)

Oriya (or)

Xhosa (xh)

Fiji (fj)

Yoruba (yo)

Zulu (zu)

Faroese (fo)

Frisian (fy)

Irish (ga)

Panjabi (pa)

Polish (pl)

Scots-Gaelic (gd)

Galician (gl)

Guarani (gn)

Pashto, Pushto (ps)

Quechua (qu)

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Parental Lock Level

This DVD receiver lets you set the Parental Lock if the DVD

has a parental lock level recorded on it. With Parental Lock

capable discs, you can block access to material you feel is

inappropriate for your children. Refer to the DVD jacket and

the accompanying documentation to see if a particular disc

contains a parental lock level.

2 Use the cursor buttons (2/3) to move the cursor to a

different position in the password.

When all four numbers of the password have been entered,

ENTER appears on the screen.

V2 Language General

Video1

Parental Lock: Register Code Number

Make changes to the [Parental Lock] setting in the Setup

screen General menu. Please note that changes to the

Parental Lock level cannot be made when a disc is playing.

Stop playback of the disc before attempting to make any

changes.

ENTER

Enter 4—Digit Code

RETURN

SETUP

Return

Exit

+/–

Move

You cannot select [Level] or [Country Code] until you have

registered a password. Select [Password] to register a new

password. See “Entering the password” on this page for how

to register a new password.

3 Press ENTER to set the password.

The password is entered.

Notes

• Be sure not to forget your password. If you should forget it, reset

the system, and enter a new password. To reset the system, see

“Resetting the DVD Receiver to System Settings” (page 81).

Please note that this procedure resets the system, and clears all

saved settings, not just the password.

V2 Language General

Video1

Setup Menu Mode — Basic

Setup Navigator

Parental Lock — Password

Level

Country Code

• Some discs lock out violent scenes. Refer to instruction notes on

discs.

Setup viewing restrictions

SETUP

Move

Exit

I Setting the Parental Lock Level

Settings: Password

Change the Parental Lock level to a higher or lower level

according to the settings printed on the DVD disc jacket or

accompanying documentation. If you use the Condition

Memory function to save the settings for a particular disc, the

Parental Lock level is saved as well. Because it is saved in

memory, Parental Lock levels can be set for individual discs

according to their content rather than a set level for all DVDs.

1 Select [Level] in the [Parental Lock] setting and press

ENTER.

(For information, refer to “Entering the Password”

on the this page.)

Level

(For information, refer to “Setting the Parental Lock

Level” on this page.)

Country Code

(For information, refer to “Setting the Country Code”

on the following page.)

The screen changes to the password input screen. You cannot

select [Level] until you have registered a password. To enter the

password, refer to “Entering the Password” on this page.

When a DVD with a set Parental Lock level is loaded

Playback cannot be started until the code number has been correctly

input by using the cursor buttons (2/3/5/∞) or the number buttons,

and ENTER has been pressed.

V2 Language General

Video1

Parental Lock: Level Change

I Entering the Password

Level

Off

Setup Parental Lock

When you select either [Level] or [Country Code], it is

necessary to register the password (4-digit code number).

You’ll be asked to confirm your existing password before

registering a new one. Use the following steps at any time you

are asked to enter or confirm your password.

RETURN

SETUP

Select

Return

Exit

ENTER

Move

2 Use the cursor buttons (2/3) to adjust the Parental Lock

Level.

1 Use the cursor buttons (5/∞) or the number buttons to

The lock icons appear “unlocked” up to the selected level to

select a number between 0 and 9.

indicate that access is available.

You can also use the number buttons to enter the numbers

directly. When entering your password for the first time, or

changing it, you will be asked to reenter your password. When

using the number buttons to confirm the password, the numbers

appear as asterisks, and the cursor advances automatically to

the next position.

3 Press ENTER to set the new level.

The new Parental Lock level is set and the screen returns to the

General menu screen. To go back to the General menu screen

without making any changes, press RETURN.

I Changing the Password

V2 Language General

Video1

Change your password whenever you feel it is necessary.

However, if you forget your existing password, you cannot

enter this screen to change it.

Parental Lock: Register Code Number

1 Select [Password Change] in the [Parental Lock] setting

Enter 4—Digit Code

and press ENTER.

The screen changes to the password input screen. To enter the

password, refer to “Entering the Password” on this page.

2 Use the cursor buttons (2/3/5/∞) or the number buttons to

enter the new password.

RETURN

Return

Exit

+/–

Move

ENTER

3 When the new password has been entered, press ENTER.

The new password is set and the screen returns to the General

menu screen. To go back to the General menu screen without

making any changes, press RETURN.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing the Function Settings

Setting the Parental Lock Level

Country Code List

I Setting the Country Code

Change your Country Code whenever you feel it is necessary.

However, if you forget your existing password, you cannot

enter this screen to change it.

1 Select [Country Code] in the [Parental Lock] setting and

press ENTER.

Country

Input-code Country-code

0118

ARGENTINA

AUSTRALIA

AUSTRIA

0121

0120

0205

BELGIUM

The screen changes to the password input screen. To enter the

password, refer to “Entering the Password” on the previous page.

The Country Code selection screen appear.

0218

BRAZIL

0301

CANADA

General

Video1 V2 Language

Country Code

0312

CHILE

0314

CHINA

List of Codes

Code (0~2)

0411

DENMARK

FINLAND

0609

Setup Country Code

0618

FRANCE

RETURN

SETUP

Return

Exit

+/–

Move

0405

GERMANY

HONG KONG

INDIA

ENTER

Select

0811

2 Use the cursor buttons (2/3) to select either “List of

Codes” or “Code”.

3 If you select “List of Codes”, use the cursor buttons (5/∞)

0914

0904

INDONESIA

ITALY

0920

to select the country.

For country codes which are only shown as a code, please refer

to “Country Code List” on this page.

1016

JAPAN

1118

KOREA, REPUBLIC OF

MALAYSIA

MEXICO

1325

List of Codes

1324

1412

NETHERLANDS

NEW ZEALAND

NORWAY

1426

1415

If you select “Code”, use the cursor buttons (5/∞) to input

the numbers of the input code.

Use the cursor buttons (2/3) to change the position of the

1611

PAKISTAN

1608

PHILIPPINES

PORTUGAL

RUSSIAN FEDERATION

SINGAPORE

SPAIN

1620

cursor. You can also use the number buttons to enter the code.

1821

Code (0~2)

1907

0519

1905

SWEDEN

0308

SWITZERLAND

TAIWAN, PROVINCE

OF CHINA

4 Press ENTER to set the new Country Code.

2023

To exit the screen without making any changes, press RETURN.

2008

THAILAND

UNITED KINGDOM

UNITED STATES OF

AMERICA

0702

2119

Download from Www.Somanuals.com. All Manuals Search And Download.

MODE

RECEIVER TV/SETUP

ACOUSTIC

CONTROL

STANDBY

INPUT SELECTOR

PROGRAM

CLEAR

LAST

COND.M

FUNC.M

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

IPM

SETUP

DOWN

TIMER

RANDOM

---

SHIFT

TOP MENU

Before operating the

remote controller

Press SHIFT.

TV VOL

ENTER

POWER

INPUT

TV CH

5∞23

DVD

SETUP

RETURN

SHIFT

DVD SETUP

TV VOL

TV MUTING

REPEAT

STEP/SLOW

This switches the functions

of buttons. Press the desired

button within 10 seconds

after pressing this button.

TUNING

TUNER PRESET

MODE

MD/CDR/TAPE

SLEEP

DIMMER

DISPLAY

VOLUME

CLOCK

MUTING

Memorizing settings (Function

Memory)

Recalling memorized settings

FUNC.M

Up to 5 settings can be memorized.

Press FUNC. M.

Only memorized settings are displayed.

CH SEL

DVD

SETUP

Press DVD SETUP.

The Setup screen appears.

Use the cursor buttons (5/∞) to

select the menu to be recalled.

Use the cursor buttons (2/3) to

select the menu you want.

Press ENTER.

Use the cursor buttons (5/∞) to

select the setting to be memorized.

As each menu is selected with the cursor,

the settings appear below the menu

heading.

FUNC.M

Press FUNC. M.

“FM” will appear on the screen, and the

setting will be memorized.

Resetting the DVD Receiver to System

Settings

CH SEL

To reset the DVD player section of this unit, press and

hold 7 on the front panel when pressing STANDBY/ON to

turn the unit from standby to on.

All program memory, saved settings from functions such as

Last Memory and Condition Memory are cleared, TV System

is reset to AUTO and all Setup screen menus are returned to

factory settings.

I To clear the Function Memory

Press FUNC. M again.

Note

Some settings cannot be memorized.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Using the Connected Equipment

Note

You can record according to the following using the connected

recording equipment:

• Sound/picture of discs played back by the DVD Receiver,

• Sound of FM/AM programs, and

Many discs and sources are copy protected. Copy protected sources

are impossible to record.

• Sound/picture of the connected source.

Basic Recording Procedure

I Digital recording from the source connected

to the digital input connectors to the digital

recording equipment connected to the

digital output connector

The digital input connector is the DIGITAL OPTICAL IN jack.

Select TV/LINE with the Input selector.

The digital output connector is the DIGITAL OPTICAL OUT

connector.

Set the recording equipment (MD

recorder, DAT, Cassette tape deck,

VCR, DVD recorder, CD recorder,

etc.) to recording pause.

Select the input source to be

recorded, then set it to play pause.

• To play and pause a DVD video, Video

CD, or audio CD, see page 31.

Recording digital sound signals from sources connected to the

digital input connectors using digital recording equipment

connected to the digital output is possible unless:

• The recording is against SCMS (Serial Copy Management

System) rules (for details of SCMS rules, refer to the

manual of the digital recording equipment),

• To select an FM/AM program, see page

37.

• To select a connected source, see page

40.

• The digital signals are in bitstream format (the recordable

digital signal format is PCM –– two channel digital stereo

sound signals), or

Refer to the manuals of the connected

source equipment for instructions on how

to play and pause.

• The sampling frequency is out of the recordable range of

the recording equipment (for recordable sampling

frequency, refer to the manual of the digital recording

equipment). 96/88.2 kHz digital audio signals are not

output from copy protected discs.

Select Stereo mode to record in analog

from the unit’s DVD to other equipment.

True DTS signals cannot be recorded in

analog.

Release the recording pause set in

I Analog recording from a DVD Video played

step 1 to start recording.

DVD

using the DVD Receiver

The digital sound signals are converted to analog signals and

output to the analog output jacks unless the DVD video is

recorded in the DTS Surround.

Start playback of the selected

source in step 2.

Although the speakers can reproduce DTS Surround sounds,

DTS signals are not output to the analog output jacks.

Notes

• If you select another input source during recording, the selected

source will be recorded.

• Sound effects described on pages 48 to 53 do not affect the

recorded sounds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling a TV connected to the DVD

Receiver

RC-505M remote controller able to operate a product from

another brand. The buttons that are used for operation are

By learning a pre-programming code, you can make the

Pre-programming codes

Note:

given on page 15.

If more than one code is given in the table, try the code one by

one until you reach the code for your component (i.e. if the first

code does not work, then try the next).

BRAND

SETTING No.

AIWA

100, 101

AKAI

102, 103, 104

AUDIOSONIC

BELL & HOWELL

BLAUPUNKT

BRIONVEGA

CENTURION

COLTINA

CORONAD

CROWN

DAEWOO

DUAL

EMERSON

FENNER

105

106

107

108, 109

110

111, 112, 113

114

115, 116

117, 118, 119, 120, 121

122

Learning a pre-programming code

Find the 3-digit number for the

brand name of the component that

you want to operate in the table on

this page.

123, 124, 125, 126, 127

128, 129

Turn on the component that you

FERGUSON

FISHER

FUNAI

FUJITSU GENERAL 136, 137, 138

GOLDSTAR

GOODMANS

GRUNDIG

HITACHI

HYPER

130, 131

132

133, 134, 135

want to operate.

MODE

TV/SETUP

While holding down MODE TV/

139, 140, 141

142, 143

144

145, 146

147, 148, 149, 150

151

SETUP, press the ENTER button,

and then release both buttons.

INNO HIT

IRRADIO

JVC

152

103

153, 154, 155, 156, 157

KENDO

KTV

LUXOR

158

159, 160

161

Within 10 seconds, enter the 3-digit

code number.

LAST M

COND.M

FUNC.M

MAGNAVOX

MARANTZ

MARK

162, 163

164

165

SP SETUP TEST TONE CH SEL

AUDIO

ANGLE

SUBTITLE

SW MODE DISTANCE

LATE NIGHT

D/ST

SURROUND

MATSUI

MITSUBISHI

MIVAR

166, 167, 168, 169

170, 171, 172, 173

174, 175

IPM

D SETUP

RANDOM

DOWN

NEC

176, 177

NOKIA

178, 179, 180, 181

OCEANIC

NORDMENDE

OKANO

181

182, 183

152

184, 185, 186

Press the button that you

programmed and check if the

system operates correctly.

ORION

• If the component does not operate

properly, return to step 3 and repeat the

steps above.

PANASONIC

PHILIPS

PIONEER

PROSCAN

QUASAR

RADIO SHACK

RCA

187, 188, 189, 190

152, 162, 191

192, 193

194

195

196

110, 141, 197, 198, 199, 200

SABA

182, 183, 201

SAMSUNG

SANYO

202, 203, 204, 205, 206, 207, 208

209, 210, 211, 212

SCHNEIDER

SEARS

103

213

SELECO

SHARP

214, 215

216, 217

SONY

218, 219, 220, 221, 222, 223

SYMPHONIC

TELEFUNKEN

THOMSON

TOSHIBA

UNIVERSUM

ZENITH

224, 225

201, 226, 227

228

213, 229

230

231, 232

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective

instruction manuals of the connected components and TV.

Symptoms

Causes

Remedies

Pages

The DVD Receiver doesn’t • The power cord is disconnected.

• Check the connection of the power cord.

• Firmly connect the power cord to the

unit's AC INLET.

switch on.

• The power cord has slipped out of the

unit's AC INLET.

• There is external noise interfering with the • Switch off the STANDBY/ON then switch it on 26

computer circuits of the DVD Receiver.

again. If not recovered, disconnect the power

cord, then connect it again.

No sound is reproduced.

• The muting function is activated.

• The DVD Receiver is not properly

connected.

• Deactivate the muting function.

• Check the connections to the DVD

Receiver.

18-25

• The amplifier protection circuitry has

activated. (The STANDBY indicator

flashes.)

• Contact your nearest Onkyo service

center.

—

• Headphones are connected.

• Decrease the volume, then disconnect the 42

headphones.

• The volume is low.

• Use the MASTER VOLUME to turn up the 42

volume.

No sound or very little

sound is reproduced from

the center speaker.

• The speakers are not properly connected. • Check the speaker connections.

• The listening mode is set to “STEREO” or • No sound is reproduced from the center

48, 51

“ORCHESTRA.”

speaker when the listening mode is

“STEREO” or “ORCHESTRA.”

• Adjust the volume level of the center

speaker.

• The volume level of the center speaker

(“CENTER”) is set to minimum.

• A speaker configuration without the center • Check that the selected speaker

speaker is selected.

configuration includes the center speaker.

No picture appears on the

TV screen.

• The TV is not set to receive the output

signals from the DVD Receiver.

• The video connection cable is not

connected securely.

• Set the TV to the DVD Receiver’s input.

Refer to the instruction manual of TV.

• Check the connections between the DVD 18, 19

Receiver and TV set.

—

The sound of the playback • Another input source is selected.

source is not heard.

• Select the appropriate input source.

The buttons on the remote • Power supply fluctuations or other

• Switch off the STANDBY/ON, then switch it

on again. If not recovered, disconnect the

power cord then connect it again.

controller and DVD

Receiver do not operate.

abnormalities such as static electricity

may interrupt correct operation.

The disc tray comes back

out automatically, shortly

after the disc tray is closed. • The disc is dirty or warped.

• Region number does not conform with

• The disc is not placed properly on the disc • Use the disc tray guide to align the disc.

tray.

• Refer to “Notes on Discs”.

8, 9

• If the region number on the disc does not

match the number on the DVD receiver,

the disc cannot be used.

this unit.

The DVD Receiver does

not start playback.

• No disc is inserted.

• Insert a disc. (Check that “DVD,” “VCD,”

or “CD” is lit in the DVD Receiver’s

display.)

• An unplayable disc is inserted.

• The disc is placed upside down.

• Check the playable discs.

• Place the disc with the playback side

down.

• The disc is not placed within the disc tray

guide.

• The disc is dirty.

• Place the disc within the proper guide on

the disc tray.

• Eject the disc and clean it.

• Deactivate the parental lock function or

change the parental lock level.

• The parental lock function is activated.

The playback picture is

occasionally distorted.

• The disc is dirty.

• It is in fast forward or fast reverse

playback.

• Eject the disc and clean it.

• Sometimes a small amount of picture

distortion may appear. This is not a

malfunction.

—

Brightness is unstable or

noise is visible on the

playback picture.

• Copy protection is activated.

• Connect the DVD Receiver directly to the 18, 19

TV. Avoid connecting the DVD Receiver to

the TV through a VCR.

The picture from the DVD

Receiver doesn’t appear

on the TV screen.

• The TV is not set to receive the output

signals from the DVD Receiver.

• The DVD Receiver is not properly

connected.

• Set the TV to the DVD Receiver’s input.

—

• Check the connections to the DVD

Receiver.

18, 19

Settings are canceled.

• When the power is turned off by power

failure or by unplugging the power cord,

settings will be canceled.

• Before unplugging the power cord, press

STANDBY/ON.

—

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptoms

Causes

Remedies

Pages

Playback doesn’t follow the • The DVD Receiver is in repeat playback

• Resume normal playback.

56, 58-62

course of the disc’s

programs.

mode, memory playback mode, or

random playback mode, etc.

The buttons on the remote • Power supply fluctuations or other

• Switch off the STANDBY/ON, then switch 26

it on again. If not recovered, disconnect

the power cord, then connect it again.

controller and DVD

abnormalities such as static electricity

may interrupt correct operation.

Receiver do not operate.

mark appears on

screen.

• The selected function does not operate

for that disc.

–

mark appears on

screen.

• The operation is prohibited by the DVD

receiver.

–

When making changes in

the Setup screen menus,

is displayed.

• There is a Video CD, CD or MP3 loaded

in the DVD receiver and the setting that

was changed only applies to DVD

performance.

• The setting will be effective the next time

a DVD is loaded.

Some settings in the Setup • The [Setup Menu Mode] is set to [Basic].

• Set the [Setup Menu Mode] to [Expert].

Menu do not appear.

No sound is reproduced.

• The pause mode is engaged.

• The volume level of TV or DVD receiver is • Increase the volume level.

• Press £ or 8 to exit the pause mode.

set to minimum.

The screen is stretched or

aspect does not change.

• The multi aspect setting is not

appropriate.

• Change the aspect setting in the [TV

Screen] setting in the Setup screen Video

1 menu to the screen type most

appropriate to the TV or monitor you are

using.

• The TV is connected with an S-video

cord.

• If you connected your TV with an S-Video 71

cord, in rare cases the TV picture may

appear stretched. In this case switch the

output from [S2] to [S1]

The disc containing the

MP3 tracks won’t play.

• The disc is not ISO 9660 compatible.

• Files are not MPEG1 Audio Layer 3

format, 44.1 or 48 kHz, fixed bit-rate.

• Check the disc.

• Check the file format.

Some MP3 tracks appear

to be missing from a disc.

• The track name does not end in “.mp3” or • This system will not recognize file that

“.MP3”.

does not end in ".mp3" or ".MP3" as an

MP3 track. Change the track name.

• This DVD Receiver only recognizes the

first 250 folders and tracks on a disc. If

there are more folders/tracks than this,

you will not be able to play them.

• More than 251 folders and tracks are

recorded on a disc.

• A multi-session disc is inserted.

• This DVD Receiver is not compatible with

multi-session discs. If the disc is multi-

session, you will only be able to play

tracks recorded onto the first session.

• Be sure to make MP3 CD with fixed bit-

rate setting.

• The disc contains variable bit-rate MP3

file.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Symptoms

Causes

Remedies

Pages

Too much noise is heard or • FM stereo waves may produce a hiss

• Switch the frequency receiving mode to

mono.

• Adjust the position, height, and direction

of the FM antenna.

• Connect an FM outdoor antenna. Try to

use an antenna with more elements.

(For installation of the outdoor antenna,

consult your nearest dealer as it requires

special skills and experience.)

sound is interrupted

occasionally. (The FM

STEREO indicator does

not light steadily.)

noise when a certain level is reached.

• The position or direction of the FM

antenna is incorrect.

24, 25

• The station is too weak.

The sound is distorted or

sound volume decreases.

• The radio wave is distorted.

• Cars are running or airplanes are flying

near the house.

–

—

Sound is excessively

distorted.

• There is a tall building or a mountain

nearby.

–

—

(The waves transmitted from the

transmission center (direct waves) and

the waved reflected by buildings or

mountains (diffraction waves) interfere

with each other causing multi pass

distortion.)

No preset channels are

selected.

• The power cord is unplugged, or the main

power is switched off, for a long time.

• The preset data in memory is lost. Preset 37

the radio stations again.

Sound is reproduced from

the speakers but not

recorded.

• The sound system you are trying to

record is DTS Surround.

• DTS Surround sound is unable to be

recorded.

—

Late Night function cannot

be used.

• Playback source is not Dolby Digital

encoded.

• Check that the Dolby Digital indicator

lights up on the display.

An z connected

component cannot be

controlled by the remote

controller.

• The signal input is not compatible.

• Use the Input Selector to select the

correct input.

• The audio connection cable is not firmly

connected to the jack.

• Firmly connect the z audio connection

cable.

Playback timer or

Recording timer function

does not operate.

• The current time is not set correctly.

• The playback timer is set to "off".

• Reset the current time.

—

• Set the playback timer to "on".

• The recording medium is not compatible.

• Make sure there is an MD, CDR or Tape

inserted in the recording component. Also

check that the timer is set correctly.

• No batteries are inserted in the remote

controller.

• The batteries are worn out.

• Insert new batteries.

The buttons on the DVD

Receiver operate but the

buttons on the remote

• Replace with new batteries.

• The remote controller is not pointed at the • Point the remote controller at the remote

controller don not operate.

remote sensor of the DVD Receiver.

• The remote controller is too far from the

DVD Receiver.

sensor of the DVD Receiver.

• Operate the remote controller within 5 m

(16 feet).

• Any wrong MODE button is pressed.

• Press the appropriate MODE button.

This unit contains a sensitive microcomputer, which under certain circumstances might fail to operate due to excessive noise

interference. If this happens, press the DVD Receiver’s PRESET MEMORY button and STANDBY/ON button at the same time

until “CLEAR” appears in the DVD Receiver’s display. The DVD Receiver turns into the standby mode, then all the custom

settings for the receiver section of the DVD Receiver will be erased. Please repeat the custom settings from the beginning.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

AMPLIFIER SECTION

Power Output (FTC)

All channels 25 watts per channel min.

Damping Factor

40 at 8 ohms

RMS. into 6 ohms two channel driven,

1,000 Hz with no more than 10% total

harmonic distortion.

Input Sensitivity and Impedance

DIGITAL OPTICAL IN

–21 to –15 dBm

200 mV/50 kohms

LINE (TV/LINE, MD/CDR/TAPE)

Continuous power output (DIN)

All channels 21 watts per channel min.

Output Level and Impedance

DIGITAL OPTICAL OUT

REC OUT (MD/CDR/TAPE)

RMS. into 6 ohms two channel driven,

1,000 Hz

–21 to –15 dBm

200 mV, 2.2 kohms

1 V, 470 ohms

Continuous Power output (EIAJ)

PRE OUT (SUBWOOFER)

All channel 26 watts per channel min.

RMS. into 6 ohms two channel driven,

1,000 Hz

Frequency Response

Acoustic Control

20 to 30,000 Hz : +/– 0.8 dB

1: +9 dB at 82 Hz

2: +9 dB at 82 Hz

+6 dB at 10,000 Hz

100 dB (0.5 V INPUT LINE)

–50 dB

Total Harmonic Distortion 10 % at rated power

0.2 % at 1 watt output

10 % at rated power

0.2 % at 1 watt output

Signal-to-noise Ratio

Muting

IM Distortion

DVD SECTION

Signal readout system

Optical non-contact

Laser

Frequency response

Signal-to-noise ratio (digital audio)

Audio dynamic range (digital audio)

Harmonic distortion (digital audio)

Semiconductor laser, wavelength 650 nm

10 Hz to 44 kHz (96 kHz)

Linear velocity

3.49 m/s (Single Layer)

3.84 m/s (Dual Layer)

More than 100 dB

More than 93 dB

Less than 0.025%

Error correction system Reed Solomon Product Code

Signal system PAL/Auto Mode

Regional restriction code European area: 2

South-east Asian area: 3

Wow and flutter

Operating conditions

Below threshold of measurability

Temperature: 5°C to 35°C (41°F to 95°F),

Operation status: Horizontal

Australian and South American area: 4

PRC: 6

Output Level and Impedance

Composite

S-Video

1.0Vp-p, 75 ohms

Y: 1.0 Vp-p, 75 ohms

C: 0.286 Vp-p, 75 ohms

Y: 1.0 Vp-p, 75 ohms

Component

(Except European models) Pb, Pr: 0.7 Vp-p, 75 ohms

RGB (European models) 0.7 Vp-p, 75 ohms

TUNER SECTION

Tuning Range

FM: 87.50 to 108.00 MHz (50 kHz steps)

AM: (South American models)

530 to 1710 kHz (10 kHz steps)

(Other models)

522 to 1611 kHz (9 kHz steps)

Usable Sensitivity

FM: Mono

11.2 dBf, 1.0 µV (75 ohms IHF)

0.9 µV (75 ohms DIN)

17.2 dBf, 2.0 µV (75 ohms IHF)

23 µV (75 ohms DIN)

Stereo

AM: 30 µV

FM: Mono

Stereo

50 dB Quieting Sensitivity

17.2 dBf, 2.0 µV (75 ohms)

37.2 dBf, 20.0 µV (75 ohms)

Capture Ratio

FM: 2.0 dB

Image Rejection Ratio

FM: 40 dB (South American models)

AM: 40 dB

85 dB (Other models)

Harmonic Distortion

FM: Mono

Stereo

AM:

FM: 30 to 15,000 Hz (+/– 1.0 dB)

FM: 45 dB at 1,000 Hz

0.2 %

0.3 %

0.7 %

IF Rejection Ratio

FM: 90 dB

AM: 40 dB

FM: Mono

Stereo

Signal-to-noise Ratio

73 dB, IHF

67 dB, IHF

Frequency response

Stereo Separation

AM: 40 dB

30 dB at 100 to 10,000 Hz

Alternate Channel Att. (+/– 400 kHz) FM: Mono

Selectivity

AM Suppression Ratio

55 dB, IHF

Stereo Threshold

Output

FM: 17.2 dBf,

FM: 750 mV

AM: 150 mV

20 µV (75 ohms)

FM: 50 dB, DIN 55dB, IHF

FM: 50 dB

GENERAL

Power Supply

Power Consumption

AC 120 volts, 60 Hz

: 130 W

Power Supply

Power Consumption

AC 220-230 volts, 50/60 Hz

: 120 W

Power Consumption (standby mode) : 2.0 W

Power Consumption (standby mode) : 2.6 W

29 W ( * )

Dimensions (W x H x D) 435 × 81 × 366 mm (17¹/8 × 3³/16 × 14⁷/16 ins.)

Weight 7.0 kg (15.4 lb.)

29 W ( * )

Power Supply

Power Consumption

AC 230-240 volts, 50 Hz

: 120 W

Power Consumption (standby mode) : 2.6 W

(* ) When clock display is on.

29 W ( * )

Specifications and features are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN

Tel: 072-831-8111 Fax: 072-831-8124

ONKYO U.S.A. CORPORATION

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com

ONKYO EUROPE ELECTRONICS GmbH

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY

Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net

ONKYO CHINA LIMITED

Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,

N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039

HOMEPAGE

http://www.onkyo.co.jp/

Printed in Japan

W0212-2

SN 29343399A

Download from Www.Somanuals.com. All Manuals Search And Download.

Milwaukee Cordless Drill 2238 20 User Manual
Moxi Home Theater Server Version 41 User Manual
Nikon Marine Battery EN EL9 User Manual
Niles Audio Speaker System OS53SI User Manual
NordicTrack Treadmill 83129881 User Manual
Nostalgia Electrics Quesadilla Maker EQM SERIES User Manual
NuTone Ventilation Hood 8814R User Manual
Omega Vehicle Security Thermometer HHLM 2 User Manual
Oreck Vacuum Cleaner DS1700HY User Manual
OTC Wireless Switch switch hub User Manual