R
INSTRUCTION MANUAL
Automatic Blood Pressure Monitor
with Printer
Model HEM-705CP
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
®
®
Thank you for purchasing the Omron HEM-705CP Intellisense
Automatic Blood Pressure Monitor with Printer
Fill in for future reference
DATE PURCHASED: ______
SERIAL NUMBER: ________
Staple your purchase receipt here.
Your new digital blood pressure monitor uses the oscillometric method of
blood pressure measurement. This means the monitor detects your blood’s
movement through your brachial artery and converts the movements into
a digital reading. An oscillometric monitor does not need a stethoscope
so the monitor is simple to use.
The HEM-705CP comes with the following components:
• Monitor
• Printer
• Standard Cuff (9''-13'' arm circumference)
• Printer Tape
• Instruction Manual printed in English and Spanish
®
The HEM-705CP Intellisense Automatic Blood Pressure Monitor with
Printer is intended for home use.
SAVE THESE INSTRUCTIONS
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY NOTES
To assure the correct use of the product basic safety measures should
always be followed including the precautions listed below:
þ
Read all information in the instruction book and any other
literature included in the box before using the unit.
þ
Contact your physician for specific information about your
blood pressure. Follow the instructions of your healthcare provider.
þ
þ
Operate the unit only as intended. Do not use for any other purpose.
The unit is intended for use in measuring blood pressure and
pulse rate in adult patient population. Do not use on infants.
þ
Do not use a cellular phone near the unit. It may result in
operational failure.
þ
þ
Do not plug or unplug the adapter power cord with wet hands.
Changes or modifications not approved by Omron Healthcare will
void the user warranty. Do not disassemble or attempt to repair
the unit or components.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE TAKING A MEASUREMENT
To ensure a reliable reading follow these recommendations:
1. Avoid eating, smoking, and exercising for 30 minutes before taking
a measurement. Rest for at least 15 minutes before taking
the measurement.
2. Stress raises blood pressure. Avoid taking measurements during
stressful times.
3. Measurements should be taken in a quiet place.
4. Remove tight-fitting clothing from your left arm.
5. Sit in a chair with your feet flat on the floor. Rest your left arm on
a table so that the cuff is at the same level as your heart.
6. Remain still and do not talk during the measurement.
7. Keep a record of your blood pressure and pulse readings for your
physician. A single measurement does not provide an accurate
indication of your true blood pressure. You need to take and record
several readings over a period of time. Try to measure your blood
pressure at the same time each day for consistency.
8. Wait 2-3 minutes between measurements. The wait time allows the
arteries to return to the condition prior to taking the blood pressure
measurement. You may need to increase the wait time depending on
your individual physiological characteristics.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
KNOW YOUR UNIT
Main Unit:
AC Adapter Jack
Heart Symbol
Set Date/Time
Adjust Date/Time
Systolic Blood Pressure
Printer Jack
Cuff Jack
ON/OFF Button
Diastolic Blood
Pressure
START Button
Pulse Rate
Memory Button
Date/Time Display
Components:
Printer
Printer Cover
Printer Cable Plug
Power/Operation
Light
Paper Feed
Print Current
Data/Stop Printing
Print Graph
Print All Data
Arm Cuff
Air Plug
(Connects to Air Jack)
Air Tube
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION/REPLACEMENT
Main Unit:
Printer Unit:
1. Press the M OPEN indicator
on the battery cover and slide
the cover off in the direction
of the arrow.
2. Install 4 “AA” size batteries
so the + (positive) and -
(negative) polarities match
the polarities of the battery
compartment as indicated.
3. Replace the battery cover.
BATTERY REPLACEMENT
Low Battery Indicator
When the Low Battery Indicator appears on the display screen remove
all the batteries. Replace with four new batteries at the same time.
Long-life alkaline batteries are recommended.
NOTE: Measurement values stored in the memory will not be
deleted during battery replacement. After replacing the
batteries, reset the date and time. Refer to page 9, Setting
the Date and Time.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE PRINTER
1. Remove the printer cord from
around the printer unit.
2. Connect the printer to the blood pressure monitor. Insert the cable plug
with the
indicator facing upward.
CAUTION: Inserting the cable plug in any other position will
damage the monitor.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING THE PRINTER PAPER
®
This printer uses OMRON thermal paper, part number 90TRP. Use
only this thermal paper or thermal paper of similar size, width 38mm,
roll diameter not to exceed 26mm.
NOTE: For information on where to purchase printer paper visit
customer service at 1-800-634-4350.
1. Open the printer cover in the direction
as indicated by the arrow symbols in
the illustration.
2. Peel back the glued edge of the printer paper.
4
i
n
Cut off the first 4 inches of the paper with
a pair of scissors.
3. Insert the edge of the printer paper in paper
feeding slot. Press the FEED button until
the paper extends approximately 3 inches.
4. Insert the paper through the printer cover.
Make sure the paper extends out from the top.
5. Close the printer cover.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE DATE AND TIME
The Blood Pressure Monitor automatically stores up to 28 measurement
values with the date and time.
Set the monitor to the current date and time before taking a
measurement for the first time. If the current date and time is not set,
a default date and time will display.
1. SETTING THE YEAR
When the batteries are installed, the 12:00 AM
will display.
Press and hold the SET button for 2 seconds to
adjust the year.
The year flashes on the display.
2. SETTING THE YEAR
The year can be set between 2001 and 2030. When the display reaches
2030, it will return to 2001.
Press the ADJUST button to advance by increments
of one year.
Press the SET button to set the current year.
The month flashes on the display.
NOTE: Press and hold the ADJUST button to
advance the value quicker.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THEDATE AND TIME
3. SETTING THE MONTH
Press the ADJUST button to advance by increments of
one month.
Press the SET button to set the current month.
The day flashes on the display.
4. SETTING THE DAY
Press the ADJUST button to advance by increments of one day.
Press the SET button to set the current day.
The hour flashes on the display.
5. SETTING THE HOUR
Press the ADJUST button to advance by increments
of one hour.
Press the SET button to set the current hour.
The minutes flash on the display.
6. SETTING THE MINUTE
Press the ADJUST button to advance by increments of one minute.
Press the SET button to set the current
minute.
The unit will be ready to take a reading.
7. Press the ON/OFF button to turn the display off.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
APPLYINGTHEARM CUFF
U
M
L
A
E
D
O
1. Make sure the air plug is securely
C
I
L
O
T
S
Y
S
C
I
L
inserted in the main unit.
O
T
S
A
I
S
L
U
P
D
2. Remove tight-fitting clothing from
your upper arm.
3. Sit in a chair with your feet
flat on the floor. Place your
arm on a table so the cuff is
level with your heart.
APPLYING THE CUFF ON THE LEFT UPPER ARM
4. Put your arm through the cuff
loop. The Green Marker on
Bottom Edge 1/2 Inch
the cuff should lie over the
brachial artery on the inside
of the arm. The air tube runs
down the inside of your arm.
The bottom of the cuff should
Cuff Tube
Green Marker
be approximately 1/2'' above
your elbow.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
APPLYING THE ARM CUFF
5. Pull the cuff so the top and bottom edges are
tightened evenly around your arm.
6. When the cuff is positioned correctly, press
the sewn hook material FIRMLY against the
pile side of the cuff.
7. Make certain the cuff fits snugly around your arm.
The cuff should make good contact with your
skin.
NOTE: You should be able to fit your
index finger between the cuff
and your arm easily, so you can
pull the cuff off and on.
8. Relax your arm and turn your palm upward.
9. Be sure there are no kinks in the air tubing.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TAKING AMEASUREMENT
The monitor automatically determines your ideal inflation level. In rare
circumstances when a higher inflation may be necessary, the monitor
automatically re-inflates the cuff up to 30mmHg higher than the initial
inflation and restarts the measurement.
The monitor detects the pulse during inflation. Do not move your arm and
remain still during the measurement.
1. Press the ON/OFF button
All display symbols appear on the screen. The cuff starts
to inflate automatically.
NOTE: To stop the inflation or measurement, push the
START/STOP button. The monitor will stop inflating,
start deflating, and will turn off.
2. Press the START button
As the cuff begins to inflate, the monitor automatically
determines your ideal inflation level. Because this
monitor detects the pulse even during inflation, do not
move your arm and remain still until the entire
measurement completes.
3. Inflation stops automatically and the measurement is started.
Deflation
Inflation
As the cuff deflates, decreasing numbers appear on the display. The
Heart Symbol
flashes at every heartbeat.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TAKING AMEASUREMENT
4. When the measurement is complete, the arm cuff
completely deflates. Your blood pressure and pulse
rate are displayed.
5. Press the ON/OFF button to turn the monitor off.
NOTE: The monitor will automatically turn off after
five minutes.
INSTRUCTIONS FOR SPECIAL CONDITIONS
If your systolic pressure is known to be more than
220mmHg, press and hold the START button until the
monitor inflates 30 to 40 mmHg higher than your
suspected systolic pressure.
START
NOTE:
• Do not apply more pressure than necessary.
• The monitor will not inflate above 299 mmHg.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MEMORY FUNCTION
Every time you complete a measurement the monitor stores the blood
pressure and pulse rate in the memory. The Blood Pressure Monitor
automatically stores up to 28 measurement values. When 28 sets of
measurement values are stored in the memory, the oldest record is
deleted to save the most recent measurement values.
TO DISPLAY THE MEASUREMENT VALUES
The date and time is alternately displayed with the measurement values.
1. Press the
button down while the Heart Symbol is displayed.
The most recent measurement values will be displayed.
NOTES:
• Press the button repeatedly to display the next values.
• Press and hold the button to display the values faster.
2. Press the START/STOP button to turn the power off.
TO DELETE ALL VALUES STORED IN THE MEMORY
You cannot partially delete records stored in the memory. All records will
be deleted.
1. Press and hold the
memory button and START button
simultaneously for more than 2 seconds.
START
16
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PRINTER
The HEM-705CP printer unit has the capability to print all the of
measurement values stored in the memory of the Blood Pressure Monitor.
NOTES:
• The correct date and time must be set up on the monitor before
taking a reading. If the date and time is not set, the numerical
values will not appear on the print out.
• The printer unit must be connected to the monitor. The monitor
does not have to be ON to operate the printer unit.
• The printer unit will automatically shut off when the printing is
completed.
• To stop printing, press the DATA/STOP button at any time.
1. TO PRINT THE MOST RECENT MEASUREMENT VALUES
Press the DATA/STOP button.
The numeric results of the most recent
reading will print.
Time
Month/Date
7/9
SYS
111mmHg
DIA
6:36 AM
67mmHg
Systolic Reading
Diastolic Reading
Pulse Reading
PULSE 77/min
17
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PRINTER
2.TO PRINT ALL THE MEASUREMENT VALUES
Press the ALL DATA button.
The numeric printout will list all of the readings stored
in the memory starting with the oldest reading to the
most recent reading followed by the average of all the
stored readings.
The stored data will print as illustrated in the following example:
Systolic Reading
Column
Diastolic Reading
Column
Pulse Reading
Column
Month(s)
3-6
mmHg
/min
D. T.
SYS
DIA
PUL
20 15
23 11
1 15
3 14
113
117
113
110
112
110
106
110
108
111
107
111
121
112
75
69
71
67
66
61
66
65
61
56
64
64
62
64
67
64
63
66
64
64
65
64
67
62
64
64
66
63
Date
Oldest reading stored
Time/Hour
5
7
15 7
20 12
3 12
10 12
12 14
14 7
21 15
22 12
Most recent reading
4
6
*AV.
112
65
65
Average of all stored
readings
Month(s) – The month or months will print.
For example: If the blood pressure readings were stored during
the months of March through June, then the printout will indicate 3-6.
Date – The day’s date will print.
For example: If the measurement was stored on June 1st, then the
printout will indicate 1 under the column ''D''.
Time/Hour – The hour in military time will print.
For example: If the measurement was stored at 3:00pm, then the
printout will indicate 15 under the column ''T''.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE PRINTER
3. TO PRINT A GRAPH OF ALL MEASUREMENT VALUES
Press the GRAPH button.
The graph will list all of the readings stored
in the memory.
The stored data will print as illustrated in the following example:
Month(s)
3-6
50
mmHg
200
100
150
Oldest reading stored
Systolic Reading
If reading is lower than 50
mmHg or higher than 200
mmHg, (3) will appear.
Diastolic Reading
Most recent reading
Average systolic reading of
stored measurements
Average diastolic reading of
stored measurements
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE ANDMAINTENANCE
To keep your digital blood pressure monitor in the best condition and
protect the unit from damage follow the directions listed below:
• Keep the monitor in the storage case when not in use.
• Do not forcefully bend the arm cuff or air tube. Do not fold tightly.
• Clean the monitor with a soft dry cloth. Do not use any abrasive or
volatile cleaners. Do not attempt to clean the cuff. Never immerse the
monitor or any components in water.
• Store the monitor in a safe and dry location. Do not subject the
monitor to extreme hot or cold temperatures, humidity and
direct sunlight.
• Avoid subjecting the monitor to strong shocks, such as dropping
the unit on the floor.
• Remove the batteries if the unit will not be used for three months
or longer. Always replace all the batteries with new ones at the
same time.
• Use the unit consistent with the instruction provided in this manual.
Use only authorized parts and accessories.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
ERROR INDICATORS
SYMBOL
CAUSE
CORRECTION
Remove the arm cuff. Refer to
“Applying the arm cuff” on page 12.
Wait 2-3 minutes.
Monitor did not
detect pulse rate
Take another measurement.
Cuff under-inflated
Cuff over-inflated
Batteries are worn
Remove the arm cuff. Read
“Taking a Measurement” on page 14.
Wait 2-3 minutes.
Take another measurement.
Replace the four batteries. Refer to
page 7 for battery installation.
TROUBLESHOOTING TIPS
PROBLEM
CAUSES AND SOLUTIONS
Replace all worn batteries.
No power.
Check the battery installation for proper
placement of the battery polarities.
No display appears on the unit
Blood pressure varies constantly.
Many factors including stress, time of day,
how you wrap the cuff, may affect your
blood pressure. Review the sections
“Before Taking a Measurement” and
“Taking a Measurement”.
Measurement values appear too
high or too low.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING TIPS
PRINTER UNIT:
PROBLEM
CAUSES
SOLUTIONS
Worn batteries
Replace all 4 "AA" batteries.
Reference page 7.
No power.
Incorrect battery
installation
Check the battery installation or
proper placement of the battery
polarities.
Printer not connected
Connect printer to BP Monitor.
Insert cable plug in correct
position. Reference page 8.
Contact Customer Service for
repair information.
Cable plug not inserted
correctly or damaged.
No data will print.
Make sure the date and time is
set-up in the monitor. Take a
reading then print.
No measurement values
are stored in the memory
Reference page 17.
Not all data stored in Worn batteries.
the memory will print.
Replace all 4 "AA" batteries.
Reference page 7.
POWER/ACTIVE
Light is blinking
Remove jammed paper and install
roll again. Reference page 9.
Install new roll of paper.
Printer paper will
not feed.
Printer paper jammed.
Ran out of paper.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE GUIDE
To ensure a reliable reading, avoid eating, smoking, and exercising for 30
minutes before taking a measurement. You should try to measure your
blood pressure at the same time each day. Avoid taking measurements
during stressful times.
1. Remove any tight-fitting clothing from your upper arm.
2. Sit in a chair with your feet flat on the floor and place your arm
on a table so the cuff is at the same level as your heart.
3. Put your arm through the cuff loop. The bottom of the cuff should be
approximately 1/2'' above the elbow. The Green Marker on the cuff
should lie over the brachial artery on the inside of the arm.
Tube should run down center of arm even with your middle finger.
Bottom Edge 1/2 Inch
Cuff Tube
Green Marker
4. Wrap the cuff firmly in place around your arm using the closure strip.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE GUIDE
5. Press the ON/OFF button. Display symbols appear.
6. Press the START button. The cuff starts to
START
inflate automatically.
Remain still and do not talk during the measurement.
NOTE: To stop the inflation or measurement, push the START/STOP
button. The monitor will stop inflating, start deflating,
and will turn off.
7. When the measurement is complete, the arm cuff
completely deflates. Your blood pressure and pulse
rate are displayed.
NOTE: Wait 2-3 minutes between measurements.
The wait time allows the arteries to return to the
condition prior to taking the blood pressure measurement.
You may need to increase the wait time depending on your
individual physiological characteristics.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC STATEMENT
Note:
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)
This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. The product generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If the product does cause harmful interference to radio or
television reception, which can be determined by turning the product on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for Canada only)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”,
ICES-003 of the Canadian Department of Communications.
Cet appareil numérique respecte les limites de bruits radioeléctriques applicables aux appareils
numériques de Clase B prescrites dans la norme sur le materiel brouilleur: “Appareils
Numériques”, ICES-003 édictée par le minister des communications.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Your HEM-705CP, IntelliSense Automatic Blood Pressure Monitor, excluding the
monitor cuff, is warranted to be free from defects in materials and workmanship
appearing within 5 years from the date of purchase, when used in accordance with the
instructions provided with the monitor. The monitor cuff is warranted to be free from
defects in materials and workmanship appearing within one year from the date of
purchase when the monitor is used in accordance with the instructions provided with
the monitor. The above warranties extend only to the original retail purchaser.
We will, at our option, repair or replace without charge any monitor or monitor cuff
covered by the above warranties. Repair or replacement is our only responsibility and
your only remedy under the above warranties.
To obtain warranty service contact Omron Healthcare’s Customer Service by calling
1-800-634-4350 for the address of the repair location and the return shipping and
handling fee. Information for warranty service is available on our website at
Enclose the Proof of Purchase. Include a letter, with your name, address, phone
number, and description of the specific problem. Pack the product carefully to prevent
damage in transit. Because of possible loss in transit, we recommend insuring the
product with return receipt requested.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THE
APPLICABLE WRITTEN WARRANTY ABOVE. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not
apply to you.
OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHER
INCIDENTAL, CONSEQUENTIAL OR INDIRECT COSTS, EXPENSES OR
DAMAGES. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights
which may vary from state to state.
FOR CUSTOMER SERVICE
Visit our web site at:
Call toll free:
1-800-634-4350
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
MAIN UNIT:
Model:
HEM-705CP
Display:
Measurement Range:
LCD Digital Display
Pressure: 0 to 299 mmHg
Pulse: 40 to 180/minute
Pressure: 3 mmHg
Pulse: 5% of reading
Automatic by electric pump
Active electronic control valve
Active electronic control valve
Capacitive pressure sensor
Oscillometric method
Accuracy/Calibration:
Inflation:
Deflation:
Rapid Pressure Release:
Pressure Detection:
Measurement Method:
Pulse Wave Detection:
Power Source:
Capacitive pressure sensor
4 "AA" batteries or AC adapter
Approximately 300 uses
50°F to 104°F (10°C to 40°C)
30 to 85% RH maximum
–4°F to 140°F (–20°C to 60°C)
10 to 95% RH maximum
Approximately 13.4 oz (380g) not including batteries
Battery Life:
Operating
Temperatures/Humidity:
Storage
Temperatures/Humidity:
Main Unit Weight:
Main Unit Dimensions:
1
4
Approximately 4 ⁄2" (l) x 7" (w) x 2 ⁄5" (h)
(115 mm x 177 mm x 71 mm)
Cuff Dimensions:
Cuff Circumference:
Contents:
Optional Accessories:
Sold Seperately
Approximately 5 1/2" x 19" (140 mm x 480 mm)
Fits arm circumference 9" to 13"
Arm cuff, printer, paper roll, instruction manual
AC Adapter - model number HEM-ADPT1
Small Adult Cuff - Arm circumference size 7" - 9"
Large Adult Cuff - Arm circumference size 13" - 17"
0 73796 70536 7
UPC Code:
NOTE: These specifications are subject to change without notice.
PRINTER UNIT:
Power Source:
Battery Life:
Paper Usage:
(Printer) Weight:
(Printer) Dimensions:
4 “AA” batteries (not included)
Approximately 300 uses (current data)
Approximately 200 uses for 1 roll (current data)
Approximately 6 oz. (170 g) (not including batteries)
4
4
Approximately 4 ⁄5'' (l) x 2 ⁄5'' (w) x 2'' (h)
(123 mm x 72 mm x 50 mm)
NOTE: These specifications are subject to change without notice.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Made in China
Manufactured by OMRON
Distributed by:
OMRON HEALTHCARE, INC.
1200 Lakeside Drive
Bannockburn, Illinois 60015-1243
© 2005 OMRON HEALTHCARE, INC.
705CPINST Rev B
Download from Www.Somanuals.com. All Manuals Search And Download.
|