MPCD33
PROFESSIONAL DUAL CD PLAYER
MANUAL
©2002
Industries
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
®
MPCD33
PROFESSIONAL DUAL CD PLAYER
CONGRATULATIONS...
You have just purchased a CD player designed specifically for the professional DJ. This unit
has been designed to provide CD mixing with the same ease and creativity that you have enjoyed
with records. Please take a few moments to familiarize yourself with the MPCD33 by reading the
following information before attempting to operate the unit.
Once again, congratulations and thank you for making the MPCD33 your choice in
professional CD players.
FEATURES:
•
Direct track access
•
Playback of CD Audio and MP3 files from properly burned
CDR
•
•
•
•
•
•
•
•
Track sequence program
Additional rotary track access
Transport bay illumination light
CDR compatible
•
•
•
•
•
•
•
20 seconds Anti-Shock™
True buffered instant start
Interactive Pitch/Search wheel with finger grip
±8/16% pitch
Sleep mode
BPM counter
Relay play
Fader or Remote switch start/pause or start/recue
Digital output
Power switch protector
Light up Rubber Play/Cue buttons
CHECK TO BE SURE
THE FOLLOWING ITEMS ARE IN THIS BOX:
CD PLAYER TRANSPORT UNIT
CD PLAYER CONTROL UNIT
OWNERS MANUAL (THIS
BOOKLET)
IEC POWER CORD (1 set)
CONTROL CABLE (1 set)
RCA CONNECTING CABLES (2 pair)
FADER START CABLE (2 sets)
Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you
purchased the unit. Retain this information and your original purchase receipt for your records. Please return the enclosed warranty
card to register your CD player with us.
MODEL: __________________________
SERIAL NUMBER:___________________
PURCHASED FROM:_________________________
DATE OF PURCHASE:________________________
- The Leader in DJ Technology
©2002 Numark Industries
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
TABLE OF CONTENTS
Safety Instructions
2
3
5
Introduction and Registration
Set-up & Connections
Description of the Features
Face Panel
6
7
8
Display
Rear Panel
MP3 File Playback (MUST READ)
9
Basic Operation
Play, Pause and Cue Operations
Track Selection, Programming, Relay Play
Matching the Tempo
Beat Matching Using Pitch Bend
Example of Mixing
10
11
12
12
13
14
Fader Start, Remote Switch Start
Before Switching off the Power
Troubleshooting Guide
Information and Specifications
Warranty
14
15
15
16
- The Leader in DJ Technology
©2002 Numark Industries
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
SETUP and CONNECTIONS
Typical connection with a mixer is illustrated below.
1. Mount the units in your console or rack with 19” EIA rails.
2. The transport should be mounted not to exceed an angle of 15 degrees.
3. Your CD player can be affected by excess vibration so mount the units in a secure
environment if possible.
4. Connect the supplied Control Cable between the CD Remote and CD Transport unit.
5. Connect the line output connections using the supplied audio cables from the CD Player
to the line inputs of your mixer.
6. Connect Fader start cable. Attach your CD play to a similarly equipped DJ mixer.
(This connection can also be used with a remote switch)
7. Connect IEC power cord to appropriate power source.
115V
230V
LINE VOLTAGE SELECTION
1) The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel of the unit.
2) Do not move the VOLTAGE SELECTOR switch with excessive force as this may cause damage.
3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman.
DIGITAL OUTPUTS: This CD player is specially equipped with digital outputs. The format is type 2, form 1,
also known as S/PDIF (Sony/Phillips Digital Interface Format). When the digital output is used the variable
pitch slider and pitch bend buttons or pitch wheel should not be used.
Note: If digital information is allowed to change in pitch, other devices may not read the digital output properly.
- The Leader in DJ Technology
©2002 Numark Industries
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
FRONT PANEL FEATURES
1. Open/Close: Press to load or eject the disc. The tray will not open if a disc is in play. The tray door will automatically close in 30
seconds if left open. This is to protect the tray from accidental damage while open.
2. Single: Toggles the unit to play back just one track at a time (single) or play continuously through all tracks and then start over
repeating the CD infinitely (continuous).
3. Time: Switches the time modes on the display between elapsed playing time, remaining time on the track, and remaining time on
the total CD. When toggled to remaining time total the total number of remaining tracks will also show.
4. LCD Display: Indicates all the functions, as they are occurring, with the CD.
5. Track Knob: Rotate this knob to select tracks.
6. Search Knob: Pressing the track knob allows you to use the jog wheel and rapidly scan the music to find a cue point. The search
function automatically shuts off after 8 seconds of non-use or you may toggle it off.
7. Track Buttons: These buttons are used to select the track to be played.
8. Player selection Button: Press these buttons to determine which player the track selection buttons will affect.
9. Program: Depress this button and the unit will stop and the program indicator will light. Select each track to be programmed and
press the PROGRAM button between selections. You can program up to 30 tracks. Press PLAY to start the program. To exit and
erase program hold the program button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the
power.
10. Cue: Returns and pauses the music at the last set cue point. The cue point is where the music will begin when play is pressed.
The cue point is set as the initial start point on a track or can be moved when play is started at a different point. For instance if the
music is paused then play is pressed a new cue point is set. You can easily edit the cue point by turning the wheel during pause.
As you rotate the wheel the music will sound. By stopping the wheel and pressing play a new point is set. Alternately pressing the
PLAY button and the CUE button allows the CD to be played from the same position any number of times.
Note: Pressing cue 2 times plays music temporarily from this point until the button is released.
11. Play/Pause: Starts the music from the cue point or pauses it while in play. By pressing play after pause a new cue point will be
set
12. Jog Wheel:
Cue Function: As explained under “CUE”, when the music is paused and you rotate the wheel, music will sound. By pressing play
a new cue point is set.
Search Function: As explained under “SEARCH KNOB”, when search is press and you rotate the wheel, the music will rapidly
scan the music to find a cue point.
- The Leader in DJ Technology
©2002 Numark Industries
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
Pitch Bend Function: allows the user to temporarily change the speed of the music to align beats. When the beats of the music
of the CD you wish to match is fast compared to the tempo of the other music, rotate the jog wheel counter clockwise (to the left).
When the CD is behind, rotate the jog wheel clockwise (to the right). The pitch changes temporarily while the jog wheel is rotated.
The faster you rotate the wheel the more pitch is changed. Releasing the wheel results in a return to the original pitch.
13. Pitch Range: actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of music. Tapping
the pitch will toggle slider between 8% and 16% pitch ranges. Holding the pitch for 3 seconds will deactivate the pitch control.
14. Pitch Range LEDs: indicate current pitch range. When both LEDs are off, the pitch slider is not active
15. Pitch Slider: By moving the slider in the (+) direction the speed of the music permanently speeds up. By moving the slider in the (-
) direction the speed of the music permanently slows down. To match the speeds of two CDs you can adjust the pitch. When the
tempo of the music of the CD you wish to match is slow compared to the tempo of the other music, move the slider to the (+) side
and match the speed. When faster, move the pitch slider to the (-) side. By making this adjustment, the speeds will be matched,
though the beats may not yet be aligned.
16. Pitch Bend Buttons: Allows the user to temporarily change the speed of the music to align beats. When the beats of the music of
the CD you wish to match is fast compared to the tempo of the other music press the (-). When the CD is behind press the (+).
The pitch changes temporarily while the (+) or (-) button is being pressed. The longer you hold the buttons the more pitch is
changed. Releasing the buttons results in a return to the original pitch.
17. BPM: Toggles the numeric display between pitch and BPM.
18. TAP: Tapping this button with the beat of the music indicates the current Beats Per Minute (BPM) in the display. The unit will
average your taps to determine the BPM so multiple taps is recommended.
19. Relay – Pressing this button will cause the sides of the unit to alternate play as one stops and the other starts. If the players are
set to single play mode then relay will alternate after each track. If the players are set to continuous it will relay after the entire CD
is played.
20. CD Drawer: Place your CDs you wish to play in here. This unit is designed to play commercially available CD and properly burned
and finalized CDR and CDRW formats. Due to variances on the specification of certain CD burners and CDs some discs home
made CDs may not play properly.
21. Power Switch: Turn on and turn off the machine with this button. The unit should always be shut down with this button first before
any external power is removed.
DISPLAY FEATURES
9. AUTOSTART – will light when the unit is set
to relay from CD unit to CD unit.
10. CONTINUOUS PLAY – Shows when the unit
is set to play back the entire CD without
stopping between tracks.
11. SINGLE PLAY- Shows when the unit is set to
play just one track at a time.
12. CD IN – indicates a standard CD is in the unit.
13. TIME BAR - Shows either track elapsed time,
remaining track time, or remaining total time
depending on the setting of the “time” button.
TIME MODE -
1. CUE - Flashing when the unit is setting a cue point. Lit
14. (Remain) indicates when track remain time is displayed.
continuously when the unit is paused at a cue point.
15. (Total) indicates when total CD remain time is displayed
2. PAUSE (II)- Active when the unit is paused.
note: if both indications are not lit, the unit will be showing
“elapsed” time
3. PLAY (>)- Active while the unit is actually playing a CD.
4. TRACK - Shows the track that the unit is playing.
16. SEARCH – indicates when the unit is searching through
5. TOTAL – indicates when total CD remaining tracks are
the music
displayed.
17. Numeric display - indicating either current pitch or BPM
18. PITCH - is lit when pitch is being displayed
19. BPM – is lit when BPM is being displayed
6. MINUTES - Shows the minutes elapsed or remaining
depending on mode setting.
7. SECONDS - Shows the seconds elapsed or remaining
20. MP3 – indicates when a CDR with MP3 files is
depending on mode setting.
inserted in the player
8. FRAMES - The CD Player breaks down a second into 75
frames for accurate cueing. This shows the frames
elapsed or remaining depending on mode setting.
- The Leader in DJ Technology
©2002 Numark Industries
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
REAR PANEL FEATURES
22. Control Cable Connector- Plug in the 8-pin cable included in here to connect the remote control and main CD unit together
23. IEC Power Plug Connector - Plug your supplied power cord in here.
24. Voltage Selector - Set this switch to the voltage for your location.
25. RCA Audio Connectors - Connect your CD player to your mixer from this line level output.
26. Digital Output - The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the
digital output you should not use variable pitch slider and the pitch bend buttons. If you adjust the pitch, other devices may not
read the digital output properly because the sampling rate changes
27. Remote Start Connector – Use this connector to plug into your fader start compatible mixer or remote switch. This function is
always active. To use this connector for fader start, connect the supplied fader start cable to a fader start compatible mixer. Every
time you move the crossfader on the mixer over to the side that the unit is on, it will automatically start playing. When you move
the fader away from that side, the unit will stop. Moving the fader back to the unit side will start play again.
There are two potential modes associated with the switch PLAY-CUE and PLAY/PAUSE. The factory setting is PLAY-CUE mode.
This means that when the unit is remotely stopped it will go back to the cue point automatically. To change modes hold down the
time button for 3 seconds and the display will flash the play “
" and pause “ ” icons. In PLAY/PAUSE mode, moving the
crossfader away from the unit side pauses right where it is, and resumes when the fader is brought back to the unit. To change
modes back to PLAY-CUE hold down the time button for 3 seconds and the display will flash the play “
icons in the display.
" and cue “
”
28. Remote Assignment Switch - Set this switch in the position for the method of remote start you will be using. Foot switches are
often used for creative mixing techniques and can be found in most music shops. Connector plugs are often ¼” and an adapter to
1/8” will be needed for connection. There are also two types of footswitches that will work with this connector. The first is a typical,
on/off pushbutton switch and are generally used for switching channels on guitar amps. The second switch is a momentary
footswitch and is usually used for keyboard sustain pedals. If you are unsure of the style of switch you have, try each position
until it works as desired.
•
•
•
ON-OFF – for use with an ON-OFF switch.
MOMENTARY – for use with a momentary style of switch.
MIXER – for use with a fader start compatible DJ mixer
- The Leader in DJ Technology
©2002 Numark Industries
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
MP3 AUDIO PLAYBACK REQUIREMENTS
While playing MP3 music, please note the following points.
It is assumed that the user of this unit understands how to properly burn a CDR and add MP3 files
to it. Many different variations MP3 audio are available from various sources and computer
programs. Please read the following to better understand how your unit will work with MP3 files.
1. Playback of VBR (variable bit rate) MP3 files is not possible on this unit. Only standard CBR
(constant bit rate) files may be played.
2. The time display for the MP3 files may not be precise due to the inherent nature of compressed
audio.
3. Cue points can not be set on MP3 audio. When MP3 files are played and “CUE” is pressed the
music will return to the beginning of the track and pause. MP3 audio lacks the time code feature
of regular CD Audio that allows for cue point setting.
4. Track sorting conforms to ISO9660 standards, but not all programs in conformity with this
standard. The playing order may be different with the burning order. Folders will be sorted first
followed by the tracks within similar to a computer system alphabetical file sort.
For example, The disc is burned with following tracks.
1ab, 2bc, 3cd, 4de, 10jk, 11kl, 20mn, 31no
Due to different burning program formats, the playing order is different as below.
• Conformable to ISO9660, the playing order is
1ab -> 2bc -> 3cd -> 4de -> 10jk -> 11kl -> 20mn ->31no
• Unconformable to ISO9660
1ab -> 10jk -> 11kl -> 20mn -> 2bc -> 31no -> 3cd -> 4de
5. If the ID3 (data area) in your MP3 includes photos, then you may not be able to play the track.
6. If the over-sampling frequency of the MP3 music is not 44.1KHz, then the PITCH CONTROL will
not work.
7. If the disc is burned with both MP3 and CDDA (Digital Audio) music, then it will be recognized
according to the first track. For example, if the first track is CDDA music the unit will play CDDA
music only.
Due to differences in CD burning software some programs may work better than others. If
you have difficulty with playback, try a CD burned with different software.
- The Leader in DJ Technology
©2002 Numark Industries
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS
PLAY and CUE
Pressing the “PLAY/PAUSE” button starts the disc. Pressing the “CUE” button will reset the disc to the last place
where the disc was started. This is called the cue point. By alternately pressing the “PLAY/PAUSE” button and the
“CUE” button, the disc may be returned and played from the cue point any number of times. This function is called back
cue.
PLAY, PAUSE and CUE
When Play is paused and then started again, the return position for the back cue will be updated as the new cue
point
EDITING CUE POINT
When the jog wheel is turned while a cue point is set, a new cue point can be located. The CD player will
repeatedly play small parts of the CD as you move it to the desired position. By pressing “PLAY/PAUSE” then “CUE” you
can confirm that this new cue point is desirable.
- The Leader in DJ Technology
©2002 Numark Industries
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
TRACK SELECTION
Track selection can be done 2 ways.
•
•
You can use the key pad by selecting the side, then the selection, then play
You can use the rotary selector on the individual player then press play
TRACK SEQUENCE PROGRAMMING
•
•
•
•
•
•
•
Select side to program
Press program, the unit will stop and the program indicator will light
Select the track to be programmed
Press the PROGRAM button
Select anther track to be programmed
Press the PROGRAM button
Press Play
You can program up to 30 tracks. Press PLAY to start the program. To exit and erase program hold the program button
down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.
RELAY PLAY
1. Insert CDs into both of the units.
2. Press the “RELAY” button.
3. Press play on the first unit. When that unit stops play it will send a signal to the second unit to start play. You will see the second
unit start play and the first unit pause. When unit 2 has completed play unit 1 will start.
Note: The play signal is sent at the end of specified play. If the unit is in SINGLE mode the play signal will start the second unit at the
end of the track. If the unit is in CONTINUOUS mode the play signal will be sent at the end of the full CD. Two CDs will play
continuously, alternating from unit to unit.
- The Leader in DJ Technology
©2002 Numark Industries
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
MATCHING THE BEATS PER MINUTE (BPM)
Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the
tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the “+”
side and match the tempo. When faster, move the pitch slider to the “-“ side. The following description is for the case of
matching the pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1.
Press PLAY/PAUSE to start PLAYER 2
Both CD players are playing discs.
Listen to PLAYER 2 in your headphones
Press PLAY/PAUSE to start PLAYER 1
PLAYER 1 is playing
When PLAYER 2 is fast
compared to PLAYER 1
slow down PLAYER 2
When PLAYER 2 is slow
compared to PLAYER 1
speed up PLAYER 2
MATCHING BEATS USING PITCH BEND
If you find the BPM’s (Beats Per Minute or Tempos) are the same, however, the drumbeats are not matched you will need
to temporarily change the pitch. This description is for the case of matching the beat of PLAYER 2 to the beat of the music
being played on PLAYER 1. (This procedure can be done on either PLAYER).
After matching the BPM’s adjust the pitch temporarily as follows:
When PLAYER 2 is behind rotate the jog wheel
When PLAYER 2 is ahead rotate the jog wheel counter
clockwise or press
to bend pitch faster
clockwise or press
to bend pitch slower.
or
or
The pitch changes automatically while the jog wheel is rotated or buttons are pressed. The faster you rotate the wheel or
longer you press the buttons, the more you change. Releasing the wheel and buttons results in a return to the original
pitch and BPM.
- The Leader in DJ Technology
©2002 Numark Industries
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
EXAMPLE OF MIXING USING TWO CD PLAYERS
While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its
pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from
PLAYER 1 to PLAYER 2.
PLAYER 1
PLAYER 1
PLAYER 1
Load a disc in PLAYER 1
and select the track and
press PLAY.
Load a disc and press the
OPEN/CLOSE button.
Press the PLAY button
Select the track to be
played.
PLAYER 2
PLAYER 2
PLAYER 2
Load a disc in PLAYER 2
and select the track then
play.
Load a disc and press the
OPEN/CLOSE button.
Press the PLAY button
Select the track to be
played.
PLAYER 2
PLAYER 2
PLAYER 2
Set and edit a start cue
point on PLAYER 2
Press the Pause button of
PLAYER 2.
Press search to release.
Slowly set the right cue
point using the jog wheel.
Press search and rotate
wheel to rapidly look for a
cue point.
Check you new cue point
PLAYER 2
PLAYER 2
PLAYER 2
Listen with the monitor and
press the play button.
Set the player to the Cue
point by pressing Cue
Press the cue button then
play to be sure of the set
cue point.
Do a MIX!
PLAYER 2
MIXER
PLAYER 2
When you are happy with
you mix adjust you mixer
accordingly.
With a matching downbeat
from Player 1 press the
play button.
If you are beat mixing turn
on your Pitch adjust and
follow the directions for
beat matching.
- The Leader in DJ Technology
©2002 Numark Industries
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
FADER START
Fader Start is achievable by attaching your CD player to a similarly equipped DJ mixer and setting the rear panel selection switch
to “mixer” mode.
1. Connect cables between the CD player and your DJ mixer.
2. Press the button or switch on your mixer into fader start mode to activate the fader start capability.
3. Typically if you move the crossfader toward the active channel, the attached CD player will activate. When it is moved away the
unit will cue or pause depending upon CD player setting.
To select start/stop mode hold the time button for 3 seconds.
If the display shows
If the display shows
then the CD will pause when the crossfader is moved away.
then the CD will CUE when the crossfader is moved away.
REMOTE SWITCH START
Remote switch start is achievable by attaching your CD player to a switch like a foot switch found in most music shops. Foot
switch connector plugs are often ¼” and an adapter to 1/8” will be needed for connection.
1. Connect the remote switch to your CD player.
2. Select the type of foot switch you will use. There are two types of footswitches that will work with this connector. The first is a
typical, ON-OFF pushbutton switch and are generally used for switching channels on guitar amps. The second switch is a
momentary footswitch and is usually used for keyboard sustain pedals. If you are unsure of the style of switch you have, try each
position until it works as desired.
3. Typically if you press the switch once, the attached CD player will activate. When it is pressed again the unit will cue or pause
depending upon CD player setting.
Note: You can also use a momentary switch in the ON-OFF switch position. In this case the unit will only play while the
switch is depressed. When the button is release it will either cue or pause depending upon mode.
BEFORE SWITCHING OFF THE POWER:
When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before
switching off the power.
DO NOT switch off the power when
Switch off the power after the
disc holder has been closed
with the “OPEN/CLOSE” button
the disc holder is open.
- The Leader in DJ Technology
©2002 Numark Industries
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MPCD33
TROUBLESHOOTING:
Symptom
Possible Cause
Corrective Action
The power fails to switch on when the
POWER switch is set to on
Poor power plug connection at the AC
outlet or IEC Power cord loose from
rear of unit
Insert the power plug firmly into the AC
outlet and make sure connection is
good in unit rear
Disc play does not start
The disc is loaded upside down
The disc is too dirty
Reload the disc with the label side up
Clean the disc
No sound
Improper output cable connections
Improper amplifier operation
Connect the output cables correctly
Check amplifier setup
Sound skips
The CD player is subject to vibrations
or physical shock
Change the installation location
The disc is too dirty
Clean the disc
Hum
Loose cable connections
Firmly connect all audio plugs
SPECIFICATIONS
TECHNICAL
Disc Type
Standard Compact discs (12 cm & 8 cm)
Time Display
Track Elapsed, Track Remain, or Total remain
Quantization
1 bit linear/Channel, 3 Beam Laser
8 Times
44.1 kHz
20 Hz to 20 kHz
Less Than 0.01%
> 90 dB
Oversampling rate
Sampling Frequency
Frequency response
T.H.D. + NOISE
S/N ratio (IHF-A)
Channel separation
Output level
> 90 dB
2 Volts R.M.S.
< 1.5 seconds
< 3 seconds
Short Access Time
Long Access Time
Start Time
within 0.03 seconds
Pitch control range
+/- 8 and 16%
Pitch bend
+/-16%
Digital Output
type 2, form 1, S/PDIF (Sony/Phillips Digital Interface Format)
GENERAL
Dimensions:
Controller (mm): 482 X 132 X 38
Main Unit: 482 X 88.5 X 257
Weight:Controller: 2.3 Kg
Main Unit 4.9 Kg
Power Supply:
115/230V AC, 50/60Hz
Power Consumption:
24W
- The Leader in DJ Technology
©2002 Numark Industries
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Professional Disc Jockey Products
LIMITED PRODUCT WARRANTY
1. What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ Mixers, Amplifiers, CD
players, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, and all other accessories are free from defects in material and
workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the
following period of time after that date for (1) Year.
2. What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser.
This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical or electrical stress, modification
of any part of the product, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) all plastic surfaces and other externally
exposed parts that are scratched or damaged due to normal use; (d) defects or damage from improper testing, operation, maintenance, installation, adjustment,
or service of the mixers; (e) crossfaders.
3. What are NUMARK'S obligations? During the applicable warranty period, NUMARK will repair or replace, at NUMARK'S sole discretion, without charge to the
purchaser, any defective component part of the mixer. To obtain service under this Limited Warranty, purchaser must first contact NUMARK and obtain a return
authorization number ("RA#"). Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales
receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and
assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. Upon receipt, NUMARK will repair or replace the defective
products. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a
product with a rebuilt, reconditioned or new product. Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on
the original mixer or for (90) days, whichever is longer. All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK
determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such
mixer.
4. What are the limits on NUMARK'S liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES
COVERING NUMARK MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, NUMARK
SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO
PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY NUMARK
MIXER, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO NUMARK'S OWN NEGLIGENCE, EVEN IF NUMARK OR ITS
AGENT HAS BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED
WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK'S MIXERS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL
ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates risk of product failure between purchaser and NUMARK, and NUMARK'S product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of NUMARK are not authorized to make modifications
to this Limited Warranty, or make additional warranties binding on NUMARK. Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by NUMARK and should not be relied upon.
5. How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER.
6. This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction to another.
RETURN INFORMATION
•
•
•
•
A Return Authorization number must be obtained from Numark through the address or phone numbers below.
A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.
The faulty equipment must be packed in its original packaging.
One additional outer layer of packaging must be included to ensure product safety. Failures to do so may inadequately protect the equipment in transit
and, therefore, jeopardize the customer’s warranty.
•
•
Numark will not accept COD shipments and no call tags will be issued for merchandise return.
Numark will not return repaired merchandise to customers by priority service, unless by written request at the customer’s cost. Requests must be
submitted in writing with merchandise returned.
•
The defective Numark equipment should be sent, FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and
original sales receipt enclosed to:
INDUSTRIES
Attention: Service Department
11 Helmsman Avenue
Phone: +1 (401) 295-9000
Fax:
+1 (401) 295-5200
Web:
North Kingstown, RI 02852 USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|