NuTone Switch VS 89 User Manual

READ AND SAVE THESE  
INSTALLATION INSTRUCTIONS!  
READ AND SAVE THESE  
INSTALLATION INSTRUCTIONS!  
Accessory  
Accessory  
TO UNIT  
TO UNIT  
Switch  
Switch  
MODEL:VS-89  
MODEL:VS-89  
INSTALLATION  
INSTALLATION  
Used with Vent–Light–Night Light  
Combination.  
Used with Vent–Light–Night Light  
Combination.  
LIGHT  
LIGHT  
1. Install a double–gang box.  
1. Install a double–gang box.  
2. Refer to Figure 1. Run power wiring  
from fuse box or circuit breaker and  
wiring from heat–vent–light wires to  
outlet box.  
3. Secure all wires to outlet box with an  
approved box connector.  
2. Refer to Figure 1. Run power wiring  
from fuse box or circuit breaker and  
wiring from heat–vent–light wires to  
outlet box.  
3. Secure all wires to outlet box with an  
approved box connector.  
VENT  
VENT  
NIGHT  
LIGHT  
NIGHT  
LIGHT  
4. Dress all leads, leaving  
4. Dress all leads, leaving  
approximately 1/2" of bare wire for  
making connections.  
5. Refer to Figure 1. Make wire  
connections. Observe cover plate  
approximately 1/2" of bare wire for  
making connections.  
5. Refer to Figure 1. Make wire  
connections. Observe cover plate  
TO 120vAC, 60Hz  
HOUSE POWER  
TO 120vAC, 60Hz  
HOUSE POWER  
FIGURE 1  
FIGURE 1  
markings (Vent–Light–Night Light) when making connections. Make sure  
that the switch and the unit it controls are properly grounded.  
6. Refer to Figure 2. Using two supplied screws, secure switch bracket  
assembly to outlet box adapter plate.  
markings (Vent–Light–Night Light) when making connections. Make sure  
that the switch and the unit it controls are properly grounded.  
6. Refer to Figure 2. Using two supplied screws, secure switch bracket  
assembly to outlet box adapter plate.  
7. Position wall plate over switch assembly and secure with supplied screws.  
7. Position wall plate over switch assembly and secure with supplied screws.  
USE A SINGLE-GANG BOX  
ADAPTER PLATE TO COVER  
DOUBLE GANG BOX.  
TO UNIT  
USE A SINGLE-GANG BOX  
ADAPTER PLATE TO COVER  
DOUBLE GANG BOX.  
TO UNIT  
2 GANG  
BOX  
2 GANG  
BOX  
ADAPTER PLATE NOT  
ADAPTER PLATE NOT  
ADAPTER  
PLATE  
ADAPTER  
PLATE  
SUPPLIED WITH SWITCH.  
SUPPLIED WITH SWITCH.  
TO 120vAC,  
60Hz HOUSE POWER  
TO 120vAC,  
60Hz HOUSE POWER  
FIGURE 2  
FIGURE 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Home Safety Product 2210 20 User Manual
Milwaukee Power Hammer 5316 21 User Manual
Milwaukee Power Hammer 5362 6 User Manual
New Holland Lawn Mower T7170 User Manual
Nextar MP3 Player MA110 User Manual
Olympus Film Camera Zoom230 User Manual
Omega Thermometer OSXL685 User Manual
Panasonic Air Conditioner CS CE9JKE User Manual
Panasonic All in One Printer KX FC175AL User Manual
Partner Tech Lawn Mower P12597RB User Manual