MA1578111D
ITEM NUMBERS:
A1573701, A1573981, A1577541,
A1578111, A1578171, A1578131,
A1578181, A1578151, A1578201
TM
Owner’s Manual
Pressure Washer Pump: For high pressure
cleaning machines.
WARNING
Read this manual.
Serious injury or death can result if safety instructions are not followed.
Pump is shipped with oil.
- Remove shipping plug and install vented fill cap. (Comet Pumps)
- Remove shipping tape from pump oil fill cap. (Cat Pumps)
- Remove shipping plug and install dipstick. (General Pumps)
- See pump oil cap section of this manual.
Closely inspect all components.
-If you have damaged components then: Contact the freight company that
delivered the unit and file a claim.
-If you have missing components then: Contact Customer Service at
1-800-270-0810.
Any Questions, Comments, Problems or Parts Orders
Call NorthStar Customer Service 1-800-270-0810
©2006 Northern Tool + Equipment
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Important Safety Rules .......................................... 4,5
Pump Oil Cap and Pump Component Identification…6
Operation Instructions ........................................….7-9
Water Supply……………….………………………...7
Start-Up/Shut-Down Instructions…………………..8
Applying Chemicals..………………………………...9
Maintenance and Storage...................................…10-12
Maintenance Mode and Maintenance Schedule…10
Pump Oil Change….…………………………...……11
Long Term Storage………………………………….12
Winter Storage……………………………………….12
Troubleshooting ...................................……............... 13
Specifications .....................….................................…14
Parts Explosions ........................................................ 15
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Rules
WARNING
1.) Read owner's manual completely.
Serious injury or death can result if safety instructions are not followed. You must be
16 or older to operate this machine. Keep untrained people away.
2.) Skin puncture hazard.
High pressure fluid can inject under skin resulting in serious injury including
amputation. Do not direct spray at people or animals.
-If skin injection happens, seek IMMEDIATE surgical treatment.
-Do not check for leaks with hand. Instead, use a piece of cardboard to check for
leaks.
-Do not use unit if exterior hose damage is evident. Make sure all fittings are tight
before starting. Relieve system pressure before servicing.
-Know how to stop engine and bleed pressures quickly. Be thoroughly familiar with
the controls.
-Make sure accessories meet the unit's temperature and pressure limits.
-Stop engine, bleed pressure, and engage spray gun safety lock before leaving unit
unattended.
3.) Risk of fire and explosion.
Hot exhaust fumes from engine can cause fire. Gasoline is highly flammable and
explosive. You can be burned or seriously injured when handling fuel.
-Position muffler at least 7 feet from combustible objects.
-Before adding fuel, stop the engine and keep heat, sparks, and flame away. Do not
add fuel when engine is running or still hot. No smoking near engine.
-Do not pump fuel directly into engine at gas station. Static charge can build and
ignite fuel. Use a UL approved fuel container to transfer gas to the engine. Wipe up
fuel spills immediately.
-Only store and handle fuel outdoors. Gasoline vapors can ignite if they collect
inside an enclosure. Explosion can result.
-Do not change or add to exhaust system. Fire can result.
-Do not change or add fuel tanks or fuel lines. Fire can result.
-Before each use, check fuel tank and fuel lines for leaks. Any fuel leak is a fire
hazard. Fix any fuel leaks before starting engine.
-During transportation take precautions to make sure pressure washer will not tip
over and cause a fuel leak fire hazard.
4.) Poisonous gas.
This machine gives off carbon monoxide, a poisonous gas that can kill you. You
CANNOT smell it, see it, or taste it.
-ONLY run machine outdoors and away from air intakes.
-NEVER run machine inside homes, garages, sheds, or other semi-enclosed spaces.
These spaces can trap poisonous gases, EVEN IF you run a fan or open doors and
windows.
If you start to feel sick, dizzy, or weak while using this machine, shut it off and get to
fresh air RIGHT AWAY. See a doctor. You may have carbon monoxide poisoning.
Save These Instructions
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Rules
WARNING
5.) Risk of exposure to dangerous chemicals.
Serious injury or death can result if chemical manufacturer instructions are not
followed.
-Wear protective gloves when handling and cleaning with chemicals.
-Understand all safety hazards and first aid for all chemicals being used.
-When cleaning filters, check if chemicals have been used and take any
precautions that are recommended by the chemical manufacturer.
-Different chemicals may interact dangerously with each other, always follow
chemical manufacturer directions before switching chemicals.
-Calculate the correct amount of chemical to mix, dispose of excess chemical
per the manufacturer instructions.
-Never spray flammable liquids.
6.) Risk of electrocution.
Electricity can kill you. Keep water away from electrical outlets and electrical
devices.
7.) Flying objects.
Small particles may fly out while spraying. Wear safety glasses. Serious eye
injury can occur.
Make sure nozzle is secure before squeezing trigger. If nozzle is not secure it
will become a projectile.
8.) Fall hazard.
Pressure washer creates puddles and slippery surfaces. Keep good footing
and balance. Serious injury can occur.
-Wear footwear cabable of maintaining a good grip on wet surfaces.
-Gun kicks back. Hold with both hands.
-Do not overreach or stand on unstable supports.
-Do not stand on ladders or scaffolding.
-Do not place pressure washer on soft or unstable ground.
CAUTION
1.) Hot muffler.
You can be burned by muffler. Do not touch.
Save These Instructions
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Pump Oil Cap and Pump Component Identification
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Instructions
Water Supply
1.) Make sure the water supply is clean. Debris can cause excess pump wear and reduce
performance.
2.) An insufficient water supply will damage your pump. Make sure the water supply is steady and is
20% over the rated flow of your pump. Use a stopwatch to time how long it takes to fill a 5 gallon
bucket with your garden hose. The bucket must fill faster than the times listed in the table below.
Model
Time to fill 5 gallon bucket
100 seconds
84 seconds
A1577541
A1573981
A1573981
A1578111
A1578131
A1578151
A1578171
A1578181
A1578201
58 seconds
100 seconds
84 seconds
72 seconds
100 seconds
84 seconds
72 seconds
3.) The water supply garden hose must have an inside diameter of at least 5/8”. If the hose is more
than 100 ft. long, the diameter must be at least 3/4”.
4.) Never use a reservoir tank as a water source. Drawing water out of a tank may cause pump
cavitation and damage to your pump. This pressure washer is designed for a pressurized water
source such as a city water faucet. However, the water source pressure must not exceed 115 psi
(8 bar).
5.) Always use a flexible rubber hose for your water supply. Do not use rigid piping.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Instructions
Start-Up Instructions
1. Attach garden hose to water inlet.
2. Attach pressure hose to water outlet and gun.
3. Attach spray gun to lance.
4. Turn water supply ON.
5. Squeeze trigger to purge air from pump.
6. Insert nozzle.
7. Start engine.
Shut-Down Instructions
1. Turn engine OFF.
2. Turn water supply OFF.
3. Squeeze trigger to relieve system pressure.
4. Remove garden hose.
5. Remove pressure hose.
6. Turn fuel valve OFF (if equipped).
WARNING
Skin puncture hazard.
High pressure fluid can inject under skin resulting in serious injury including
amputation. Do not direct spray at people or animals.
-If skin injection happens, seek IMMEDIATE surgical treatment.
-Do not check for leaks with hand. Instead, use a piece of cardboard to check for
leaks.
-Do not use unit if exterior hose damage is evident. Make sure all fittings are tight
before starting. Relieve system pressure before servicing.
-Know how to stop engine and bleed pressures quickly. Be thoroughly familiar with
the controls.
-Make sure accessories meet the unit's temperature and pressure limits.
-Stop engine and bleed pressures before leaving unit unattended.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Instructions
Applying Chemicals
1.) Install the black nozzle to spray chemicals onto the cleaning surface.
2.) Start the pressure washer according to the start-up instructions.
3.) Submerge the chemical hose in cleaning solution.
4.) Squeeze the spray gun trigger. The chemical injector will draw the chemical into the water
stream.
5.) Apply chemicals evenly onto the cleaning surface. Allow the chemicals to react with the dirt, then
clean at high pressure with green nozzle.
6.) Never use more chemical than is necessary to clean the surface.
7.) To clean the chemical injector, draw water through the strainer until all the chemical is purged
from the system.
pump
pump outlet
pump inlet
diluted
chemical
strainer
WARNING
Risk of exposure to dangerous chemicals.
Serious injury or death can result if chemical manufacturer instructions are not
followed.
-Wear protective gloves when handling and cleaning with chemicals.
-Understand all safety hazards and first aid for all chemicals being used.
-When cleaning filters, check if chemicals have been used and take any
precautions that are recommended by the chemical manufacturer.
-Different chemicals may interact dangerously with each other, always follow
chemical manufacturer directions before switching chemicals.
-Calculate the correct amount of chemical to mix, dispose of excess chemical
per the manufacturer instructions.
-Never spray flammable liquids.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Storage
Maintenance Mode
Before performing any maintenance on the pressure washer, it must be placed in maintenance mode.
1.) Turn off engine.
2.) Turn off water supply.
3.) Squeeze trigger to relieve system pressure.
4.) Shut off fuel valve.
5.) Unplug spark plug wire from spark plug, (see engine owners’ manual).
Maintenance Schedule
What to Check
When To Check
What to Do
Inlet Filter
Each Use
Visually inspect and clean inlet filter with clear water.
Visually inspect pressure hose and hose couplings. Replace
hose if any of the following is evident:
Pressure Hose
Each Use
hose coupling is damaged, wire mesh is exposed or
damaged, hose is permanently kinked or flattened, outer
hose cover is blistered or loose.
Bolts
Each Use
Tighten any loose bolts.
Engine Oil
Pump Oil
See engine manual See engine manual for oil change instructions
After 1st 50hrs,
then 3mo/500hr
Change pump oil. See pump oil change instructions on next
page.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Storage
Pump Oil Change
1.) Place a suitable container below the pump to catch the used oil, then remove the oil fill cap and oil
drain plug.
2.) Allow the used oil to drain completely, then reinstall the drain plug and tighten securely.
3.) Please dispose of used oil in a manner that is compatible with the environment. We suggest you
take used oil in a sealed container to your local recycling center or service station for reclamation.
Do not throw it in the trash, pour it on the ground or down the drain.
4.) With the pump in a level position, fill to the half way point on the oil sight glass (see pump oil
capacities below). For Comet pumps use Universal Tractor Transmission Oil or Mobil1 synthetic
oil (15W50). For Cat pumps use SAE30 non-detergent oil or Cat Pump Oil Item# 22158.
A1573981
fill cap
A1577541
fill cap
A1573701
fill cap
drain plug
sight glass
sight glass
drain plug
drain plug
Oil capacity: 3.4 oz. (.10 L)
A1578111
Oil capacity: 11 oz. (.33 L)
A1578131
Oil capacity: 14 oz. (.41 L)
A1578151
fill cap
fill cap
fill cap
sight glass
drain plug
sight glass
drain plug
sight glass
drain plug
Oil capacity: 5.7 oz. (.17L)
Oil capacity: 10.3 oz. (.30L)
Oil capacity: 4.3 oz. (.13L)
A1578171
A1578181
A1578201
fill cap
fill cap
fill cap
sight glass
sight glass
sight glass
drain plug
drain plug
drain plug
Oil capacity: 8.5 oz. (.25L)
Oil capacity: 10.2 oz. (.30L)
Oil capacity: 22.6 oz. (.62L)
02444
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Storage
Long Term Storage
Follow the engine owner’s manual for storing the engine.
Winter Storage
Protect your pump, hose, and gun from freezing.
Items needed: 12” piece of garden hose or equivalent, funnel and RV antifreeze (approximately 6 oz.)
1.) Follow the storage instructions listed above.
2.) Disconnect spark plug cable. Make sure the engine start switch is OFF, and the fuel valve is OFF.
3.) Attach the garden hose with funnel to the pump inlet (see illustration).
4.) Pour RV antifreeze into the funnel, pull the engine recoil until antifreeze comes out the pump
outlet.
5.) Drain all water from the high pressure hose. Depress trigger on gun and drain all water out of
gun/lance.
RV Antifreeze
Funnel
Hose
Water Inlet
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Engine will not start
SOLUTION: A,B
Low/Surging pressure or no water flow
No chemical injection
SOLUTION: C,D,E,F,G,H
SOLUTION: I,J,K,L
Cause
A- Low oil shutdown
B- Engine starting instructions not followed
C- Insufficient water supply
D- Plugged pump inlet filter
E- Wrong nozzle
Solution
See engine manual for oil requirements
See engine manual for starting instructions
See water supply section of this manual
See maintenance section of this manual
Make sure high pressure nozzle is being used
Remove nozzle, check for blockage
Replace nozzle
F- Plugged nozzle
G- Worn nozzle
Replace pressure hose
Make sure chemical nozzle is being used
Try shorter hose
Replace hose – use hose clamps if necessary
Make sure strainer is completely submerged
H- Leak in pressure hose
I- Wrong nozzle
J- Back pressure from extra long discharge hose
K- Leak in chemical siphon hose
L- Chemical strainer not submerged
Any Questions, Comments, Problems or Parts Orders
Call Northstar Customer Service 1-800-270-0810
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
A1577541
PSI
GPM
A1573701
PSI
GPM
2700
2.5
2000
3.0
Max Water Temp
Max Water Temp
140°F
140°F
Power
Shaft size
Nozzle size
5-6.5hp Gas engine
¾” keyed
#3.0
Power
Shaft size
Nozzle size
5-6.5 hp Gas engine
¾” keyed
#4.0
A1573981
PSI
GPM
A1578111
PSI
GPM
3000
4.0
2700
2.5
Max Water Temp
Max Water Temp
140°F
140°F
Power
Shaft size
Nozzle size
11-13 hp Gas engine
1” keyed
Power
Shaft size
Nozzle size
5-6.5hp Gas engine
¾” keyed
#3.0
#4.5
A1578171
PSI
GPM
A1578131
PSI
GPM
2750
2.5
3000
3.0
Max Water Temp
Max Water Temp
140°F
140°F
Power
Shaft size
Nozzle size
5-6.5hp Gas engine
¾” keyed
#3.0
Power
Shaft size
Nozzle size
8-9hp Gas engine
1” keyed
#3.5
A1578181
PSI
GPM
A1578151
PSI
GPM
3200
3.0
4000
3.5
Max Water Temp
Max Water Temp
140°F
140°F
Power
Shaft size
Nozzle size
8-9hp Gas engine
1” keyed
#3.5
Power
Shaft size
Nozzle size
11-13hp Gas engine
1” keyed
#3.5
A1578201
PSI
GPM
4000
3.5
Max Water Temp
140°F
Power
Shaft size
Nozzle size
11-13hp Gas engine
1” keyed
#3.5
The manufacturer reserves the right to make improvements in design and/or changes in
specifications at any time without incurring any obligation to install them on units previously
sold.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Explosion Rev. D
Item Part#
Description
Qty Model
Item Part#
Description
Qty Model
14” A1578171,8181
1
38514
Comet VRX Pump
General TP 2530
General EZ3040
1
1
1
1
1
1
1
1
1
1
A1577541
A1573701
A1573981
A1578111
A1578171
A1578131
A1578181
A1578151
A1578201
all
6
777165 ¼” PVC Hose
35811
35812
,
8201
779404 Comet BXD Pump
38518
38516
777654 Cat 3SP Pump
38517
38520
7
38584
Easy Start Valve
1
1
A1578171,8181
,
8201
A1578171,8181
8201
Cat 3DX Pump
Comet AXD Pump
8
9
777347 3/8” Street Tee
Comet ZWD Pump
Cat 66DX Pump
35918
Thermal Valve
1
1
A1578171,8181
A1578201,3701
,3981
2
3
777915 Quick Connect
Outlet Plug
4027
777836 Thermal Valve
Inlet Filter
1
A1577541, 3701,
3981,8111,8131
,8151
10
22393
35814
22392
35813
82141
82142
82143
Pop Off Valve
Pop Off Valve
Pop Off Valve
Manifold Inlet
3/16” x 1.5” Shaft Key
3/16” x 2” Shaft Key
¼” x 1 ¾” Shaft key
1
1
1
1
1
1
1
A1578181,8201
A1573701
A1573981
A1573701,3981
A1578111,8171
A1573701
A1578181,8131
,3981,8151,820
1
38596
35169
Inlet Filter
Inlet Filter
1
1
2
a1578171,818
A1578201
A1578171,8181,
8201
A1578171,8181,
8201
18
19
4
5
777340 ¼” x ¼” Hose Barb
Fitting
777834 ¼” Hose Clamp
20
21
22
2212
Chemical Strainer
1
3ft
1
all
all
777165 ¼” Chemical Hose
777837 3/8” plug
A1578181
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|