Meridian Digital
Telephones
Meridian SL-100
M3905 Call Center
User Guide
Enterprise Voice Solutions Customer Documentation
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction to your M3905 Call Center Telephone 9
M3905 Call Center Telephone 9
M3905 Call Center Features 10
Available ACD Features on the M3905 Telephone 11
Terms you should know 13
Your telephone’s controls 15
Context Sensitive Soft Keys (self-labeled) 16
Call Processing Keys 16
Fixed Keys 17
Application Keys 20
Primary Directory Number 21
Individual Directory Number 21
Message Key 21
M3905 Call Center Meridian Digital Telephone 22
Your telephone display information 22
M3905 Display 22
Options List 23
Select a language 24
Change a Feature Key label 24
Adjust Screen contrast 26
Adjust volume 26
Choose Ring type 27
Select Call Log options 27
Live dial pad 28
Preferred name match 28
Area code set up 28
Call timer 29
Date/time format 29
Key click 29
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Headset type 30
Headset port on call 30
Headset port external alerter 31
Display diagnostics 31
Call Center headset interface 32
Freeing your hands while on the job 32
Switching between the handset and the headset 32
Call Center agent/supervisor features 33
Agent Login 33
Agent Login Enhancement 33
Agent Logout 34
Agent features 35
Activity Code Fixed Key to activate Line-of-Business code 35
Answer Call Center Calls 35
Call Forcing 36
Multistage Queue Status Key/Lamp 36
Display Queue Threshold (MSQS enhancement for agents) 37
Emergency Key 39
Make Busy 39
Not Ready Key 40
Answer or Make Non-ACD Calls 41
Contact your supervisor 41
Transfer to InCalls Key 43
Call Center supervisor features 44
Agent Keys 44
Answer Agent 44
Answer Emergency 45
Call Agent 45
Use Supervisor Observe and the Supervisor Headset Jack 45
Controlled Interflow 46
Night Service 46
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Observe Agent 47
Display Agent Status 48
Display Queue Status 49
Your telephone non-ACD call features 50
Make a Call 50
Predial feature 51
Auto Dial 51
Redial Last Number Called 52
Activate Ring Again 52
Speed Call 53
System Speed Call (Network Speed Call) 54
Intercom Call 55
Group Intercom All Call 55
Intercom Call on a Predesignated Set 56
Individual Page from Group Intercom 57
Answer a Call 57
While you are away from your desk 58
Call Forward 58
Forward an Internal Call (Call Forward Busy/Don’t Answer Split) 59
Call Forward – Remote Activation 60
While on an active call 61
Place a call on Hold 61
Transfer a Call 61
Blind Transfer Recall 62
Call Park 63
Charge a Call or Charge a Forced Call 65
Inspect Key 65
Trace a Malicious Call 66
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Incoming calls 67
Answer Call Pickup 67
Call Waiting 68
Talk with more than one person 69
Set up a conference call 69
Call Join 70
Preset Conference 70
Call features 71
Use Privacy Release 71
Paging 71
Busy Override 72
Make an Announcement over the Call Page 72
Use Station Camp-on 73
Class features on IVD sets 74
Anonymous Caller Rejection (ACRJ) 74
Automatic Callback (ACB) 74
Automatic Recall (AR) 75
Customer Originated Trace (COT) 76
Calling Name/Number Delivery Blocking (CNNB) 77
Selective Call Forward (SCF) 78
Directory display and navigation 79
Access your Callers List, Redial List, or Personal Directory 79
Directory password protection 80
Call Log 83
Access and use the Callers List 83
Access and use the Redial List 84
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Personal Directory 86
Access the Personal Directory 86
Add a Personal Directory entry 86
Add an incoming call 88
Add an outgoing call 89
Delete or edit a Personal Directory entry 89
Delete your Personal Directory 90
Use the Personal Directory to make a call 91
Use Card View 91
Search for an entry 92
Copy a number from the Redial List 93
Corporate Directory 94
Accessories for the M3905 97
Additional key caps 97
Accessory Connection Module (ACM) 97
Personal Directory PC Utility 97
Headset 97
Handset 97
Analog Terminal Adapter (ATA) 98
External Alerter and Recorder Interface 98
Key-based Access Expansion Module (KBA) 98
Display-based Access Expansion Module (DBA) 98
Feature Key chart 99
Meridian SL-100 Feature Access Codes (FAC) 103
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction to your M3905 Call Center Telephone
Introduction to your M3905 Call Center
Telephone
Your Call Center Meridian Digital Telephone provides easy access to a wide range of
business features. Your telephone system administrator assigns features to your
feature keys and provides you with passwords and other codes as required.
The Meridian SL-100 system automatically controls incoming call routing to
answering positions, and can provide music or recorded announcements to waiting
callers.
One of the codes provided by your system administrator is the Feature Access Code
(FAC) which you need in order to use some features. For other features, you may need
a feature key.
In this document, Call Center telephone and Automatic Call Distribution telephone
(ACD) are interchangeable terms for the M3905 Call Center telephone.
Additional hardware options are available to expand the capabilities of the M3905
Call Center Telephone. See “Accessories for the M3905” on page 97.
M3905 Call Center Telephone
LCD Display
Goodbye
Hold
Message Waiting Light/
Incoming Call Indicator
LED
Programmable Line/
Feature Keys
(self-labeled)
Supervisor
Observe Key
Date/Time Display
Context Sensitive Soft Keys
(self-labeled)
Fixed Feature Keys
In-Calls
Copy
Volume Control Bar
Make Busy
LED
Headset
Navigation Keys
Not Ready
Mute
Supervisor
Quit
Emergency
553-9043
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction to your M3905 Call Center Telephone
M3905 Call Center Features
The M3905 Call Center features:
•
•
•
eight Programmable Line/Feature Keys (self-labeled), giving the user
access to eight Line/Feature Keys
four Context Sensitive Soft Keys (self-labeled), giving the user access to a
maximum of 10 of the available features
six Fixed Feature Keys (configured to fit the users business needs)
Optional key caps:
— Call Agent
Fixed key caps:
— Headset (with LED indicator)*
— In-Calls*
— Observe Agent (Obv Agent)
— Answer Emergency (Ans
Emerg)
— Supervisor*
— Emergency*
— Answer Agent
— Not Ready*
— Activity (for LOB codes)
— Make Busy*
— Display Queue (Dsply Queue)
– for MSQS or Display Queue
status
Note 1: The Headset and In-Calls Keys are required. Your system
administrator can reconfigure the remaining four keys to any of the features
listed above. Key caps need to be replaced to match the reconfigured feature.
Note 2: *The features with an asterisk are the default keys.
Optional accessories:
•
•
•
•
•
•
•
•
Handset
Headset
Accessory Connection Module (ACM)
Key-based Access Expansion Module (KBA)
Display-based Access Expansion Module (DBA)
External Alerter and Recorder Interface (MEARI)
Analog Terminal Adapter (ATA)
Personal Directory PC Utility
Note: The M3905 does not support handsfree calling.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction to your M3905 Call Center Telephone
Available ACD Features on the M3905 Telephone
Common Agent/Supervisor Features
•
•
•
•
•
•
•
•
•
•
•
Headset
Non-ACD Call Keys
Hold
Personal Directory
Call Log
Redial List
Options
Call Park by ACD Agent
ACD Call Transfer with Time
Transfer to Incalls Key
Agent Login Enhancement
Table 1 contains more Agent and Supervisor features for the M3905 ACD set.
Table 1 Agent and Supervisor features
Agent features
Supervisor features
Agent-Status Lamp.
Call Source Identification.
Called Name/Number Display.
Emergency Keys.
Display Agents Summary Key.
Forced Agent Availability.
Controlled Interflow.
Agent Key.
Emergency Keys Enhanced.
Incalls Key.
Call-Supervisor Keys.
Not-Ready Key.
Call-Agent Key.
Night Treatment.
ACD Station Maintenance and
Configuration Enhancements.
Supervisor Control of Night Service.
ACD Multistage Queue Status
Refresh.
ACD Observe-Agent Enhanced.
Multistage Queue Status Key/Lamp. ACD Status-Lamp Enhancement.
ACD Walkaway/Closed Key
Operation.
ACD-Limited Enhanced Agent Features.
Line of Business Codes.
Make Set Busy.
ACD Observe-Agent/Three-Way Calling.
Extended Agent Observe.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction to your M3905 Call Center Telephone
Table 1 Agent and Supervisor features
Agent features
Call Forcing.
Supervisor features
Flexible Call Observing-Nodal.
Observe Agent from 2500 set.
Observe-Agent Key.
Display Queue and Threshold.
Walkaway and Return from
Walkaway.
Agent Login and Login
Enhancements.
Display Queue-Status Key.
Multistage Queue Status Display.
Answer Agent.
Answer Emergency.
Display Queue Threshold.
Make Set Busy.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms you should know
Terms you should know
Agent Set – A telephone set configured to efficiently answer incoming calls that have
been directed to a group of ACD telephones vs. a single person or line.
Attendant – The attendant is a telephone operator in your organization.
Call party information – When your telephone rings, the display shows Caller Line
Identification (CLID) information. The system must have CLID enabled. The display
module shows the phone number and name of the inbound call.
Context Sensitive Soft Key – The four keys located directly below the display on the
M3905 are referred to Context Sensitive Soft Keys. The label and function of each
key changes, depending upon the available features or the active application assigned
to each key.
Date/time display feature – The Date/time display feature shows the month and date
when the telephone is in an idle state.
Directory Number (DN) – The Directory Number is a number that consists of one to
seven digits for a telephone, also known as an extension number.
Feature display – The display area shows status information about the feature in use.
It also displays the name and status of the active session.
Feature Access Codes (FAC) – The Feature Access Codes are codes you dial in order
to use a telephone feature instead of pressing a fixed feature or soft feature key. For
your convenience, the FACs for your system can be printed on a page located at the
back of this guide.
Fixed Feature Key – The Fixed Keys are keys on your telephone, that are labeled at
the factory.
Indicator status – The status indicator can be an LCD or LED that indicates the
status of a feature by the flash, wink, steady on, or off of the LCD or LED indicator.
Information line – The Information line of the display relates call information or
application information.
Information display – The Information screen displays call activity, lists, prompts,
and status of calls.
Interrupted dial tone – Interrupted dial tone is a broken or pulsed dial tone, heard
when you access some of the features on your telephone.
Meridian SL-100 – The Meridian SL-100 system is your business communication
system.
Off-hook – Off-hook is a term used to indicate that the telephone is active and ready
to make a call. On the M3905 you can go off-hook when you press your Individual
DN Key only. The M3905 does not go off-hook when you press the In-Calls Key or
press your Primary DN (Call Center DN).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms you should know
Paging tone – A Paging tone is two beeps followed by a dial tone. You hear the
special Paging tone when you are using the Radio Paging feature.
Primary Directory Number (PDN) – The Primary Directory Number is the main
extension number on your telephone. It is referred to by the Primary Directory
Number Key. On the M3905, the Primary Directory Number and your ACD
Directory Number are the same. The In-Calls Key connects directly to the Primary
DN Key. The Primary DN Key is the key located at the lower right-hand side of the
upper portion of the display area.
Ringback/ring tone – The Ringback/ring tone is the sound you hear when a call
you have made is ringing at its destination.
Shared Directory Numbers – A shared directory number is a DN (extension) that
is shared by two or more persons.
Special dial tone – The special dial tone refers to three consecutive tones followed
by dial tone that you hear when accessing some of your telephone features.
Supervisor Set – A telephone set configured to manage a group of ACD agents,
and it can also be configured to answer incoming calls that are directed to a group
of ACD telephones vs. a single person or line. You normally configure a
Supervisor’s set with features that display agent and group performance.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Your telephone’s controls
Your telephone’s controls
This section describes the features on the M3905 ACD Meridian Digital telephone.
Programmable Line/Feature Keys (self-labeled)
In addition to secondary extension number(s), you can have features assigned to the
Feature Keys on your telephone. An LCD indicator shows the status of the feature
assigned to each key. See “Agent features” on page 35. Also see “Call Center
supervisor features” on page 44.
Line Key
A steady LCD indicator appearing beside a
x2494
Line (DN) Key means that the feature or line
is active. A flashing LCD indicator means
the line is on hold or the feature is being
programmed.
Auto Dial Key
An Auto Dial Key lets you dedicate a
Line/Feature Key to a specific number.
Sales
Inspect Key
The Inspect Key allows you to display
information associated with the Line/Feature
Keys. The display information on a second
caller does not interfere with the current call
in progress.
Display
Note: If the Auto Display feature is enabled,
Calling Line Identification is displayed for a
second incoming call.
Options Key
The Options Key is a dedicated
Options
Options
Programmable Line/Feature Key. The
Options Key is located at the top-left side of
the upper display area. Press the Options
Key to access the Options Menu.
Press the Options Key to make adjustments
to your telephone’s volume and display
contrast, as well as other feature settings.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Your telephone’s controls
Applications Key
The Applications Key allows you to access
server applications, such as Corporate
Directory, if available on your system.
Apps
The Individual DN Key allows you to make
and receive non-ACD calls.
x2498
Context Sensitive Soft Keys (self-labeled)
The four keys located in the middle of the
telephone, below the display screen, are your
Context Sensitive Soft Keys. These keys can
have the following assigned to them:
• Transfer
• Conference
• Call Forward
• Ring Again
• Call Park
• Call Pickup
• Speed Call
• Privacy Release
• Callers List
• Redial List
Call Processing Keys
Goodbye Key
Press the Goodbye Key to terminate an
active call.
/
Hold Key
Place an active call on Hold by pressing the
Hold Key. Return to the caller by pressing
the extension key next to the flashing
indicator.
/
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Your telephone’s controls
Mute Key
When engaged in a call, you can press the
Mute Key. The party(ies) to whom you are
speaking cannot hear you. When you wish to
return to the two-way conversation, you must
press the Mute Key again. On the M3905
ACD, the Mute Key applies to handset and
headset microphones. The LED flashes
quickly when the Mute option is in use.
/
Volume Control Bar
Use the Volume Control Bar to adjust the
volume of the handset, headset, speaker,
ringer and buzzer. While on a call or while
the telephone is ringing, adjust the volume
on your set using the Volume Control Bar.
Raise the volume by pressing the right side
or lower the volume by pressing the left side.
You can also adjust the volume of ringing,
headset or buzz by selecting Volume
adjustment in the Options Menu.
Message Waiting Lamp
The Message Waiting Lamp lights when you
have a message waiting. See the M3905 Call
Center Telephone figure on page 9.
Fixed Keys
The Fixed Feature Keys on your M3905 ACD Meridian Digital Telephone are labeled
at the factory. The Fixed Feature Keys include: Headset, Call Supervisor, Emergency,
Not Ready, Make Busy, and In-Calls. These keys can be reconfigured to Activity
Code, Answer Emergency, Answer Agent, Observe Agent, Display Waiting Calls or
Call Agent to fit your business needs. The two keys that cannot be changed are
Headset and In-Calls.
In-Calls Key
Press the In-Calls Key to answer incoming
ACD calls. The In-Calls Key provides easy
access to your Primary or ACD Directory
Number of the agent position.
/
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Your telephone’s controls
Headset Key
Press the Headset Key to toggle back and
forth between headset and handset. It is
common to both the agent and the
supervisor. The headset indicator is lit when
active.
/
Headsets vary in electrical, physical and
audio characteristics. Performance
perception is subjective so it is
recommended that the headset user try using
the headset with each of the three settings on
internal and external calls. This helps
determine which works best. As with all
Meridian Digital Telephones, amplified and
unamplified headsets are supported.
Note 1: If you have the handset option
installed, press the Headset Key to switch
between headset and handset. The handset is
an optional hardware item. If you order the
handset option kit, it is recommended that
your system administrator install the
equipment.
Note 2: Use the Amplified Headset setting if
you are using the amplified headset.
Supervisor Key
From an agent set, press the Supervisor Key
to access a supervisor.
/
Call Agent Key
From a supervisor set, press the Call Agent
Key (optional key cap) and dial an agent’s
secondary DN to communicate directly with
the agent. Alternatively, if you configure an
Agent Programmable Feature Key (not one
of the Fixed Feature Keys) on the supervisor
set for each agent, press the Call Agent Key
followed by the associated Agent Key.
/
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Your telephone’s controls
Emergency Key
Press the Emergency Key to join the
supervisor into a call when judged to be an
emergency situation. It can also be used to
add a recording device automatically.
/
/
The Emergency key is on the agent set.
Not Ready Key
Press the Not Ready Key to put the agent
position in a Not Ready state. The Not Ready
state takes the agent out of the ACD queue
without logging the agent out. The Not
Ready state allows the agent to perform and
record post call processing duties connected
to ACD calls. This key is common to both
agent and supervisor sets.
Make Busy Key
Press the Make Busy Key to log out of the
ACD queue and agent position. This key is
common to both agent and supervisor sets.
/
Activity Code Key
Press the Activity Code Key and enter the
appropriate line of business (LOB) code to
record the activity the agent is performing.
/
Answer Emergency Key
Press the Answer Emergency Key on the
Supervisor ACD telephone to answer agent
emergency calls.
/
Answer Agent Key
Press the Answer Agent Key on the
Supervisor ACD telephone to establish a
direct connection to the supervisor from an
agent position.
/
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Your telephone’s controls
Observe Agent Key
Press the Observe Agent Key (on the
supervisor ACD telephone) to monitor the
activity on the agent’s telephone.
/
Display Queue Key
Press the Display Queue Calls Key on the
agent’s ACD telephone to display incoming
calls waiting information.
DsplyQueue
/
The Display Queue Calls Key on the
supervisor’s ACD telephone displays to the
supervisor information on the number of
manned agent positions, the number of calls
waiting in the incoming call queue, number
of calls logically queued, and the waiting
time of the oldest call in the ACD queue.
Supervisor Observe Key
Press the Supervisor Observe Key (LED) to
allow a walk-around supervisor to plug the
headset into the headset jack at the side of
the agent’s telephone and monitor or join the
conversation between the agent and the Call
Center caller.
Application Keys
Quit Key
Press the Quit Key to end an active
application without affecting the state of any
call on the telephone.
Copy Key
Press the Copy Key to copy entries from the
corporate directory to the personal directory.
/
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Your telephone’s controls
Navigation Keys
Press the Navigation Keys to move up,
down, right, and left through features,
menus, and application functions on the
display.
Primary Directory Number
The lower-right key of your programmable keys is the ACD Primary Directory
Number (DN) Key which is the same as the In-Calls Key. On an ACD set there can be
a Primary ACD Directory Number, as well as an Individual Directory Number.
Individual Directory Number
The Individual Directory Number is the second Directory Number for the telephone.
You can make outgoing calls on this number and receive incoming calls. The
Individual line can be configured to have all the standard functions of a regular
telephone line.
Note: You have only one Primary Directory Number assigned to your telephone. You
can have additional Directory Number (DN) Keys assigned to your telephone.
Message Key
The Message Key can be configured as Key 17 and appears in the area of the Context
Sensitive Soft Keys. In this configuration, you will only see it appear when you go off
hook. In addition, it will only dial your voice mailbox when you have a message
waiting. As an alternative, a Message Key may be configured as a Programmable
Line/Feature Key (self-labeled). This configuration allows you to dial your voice
mailbox whether or not you have a message waiting.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
M3905 Call Center Meridian Digital Telephone
M3905 Call Center Meridian Digital Telephone
Your Call Center Meridian Digital Telephone provides easy access to a wide range of
business features.
Your telephone system administrator assigns features to your feature keys and
provides you with passwords and other codes as required.
Note: In this document Call Center telephone and the Automatic Call Distribution
(ACD) telephone are interchangeable terms for the M3905 Call Center Telephone.
Your telephone display information
M3905 Display
The upper portion of the display on the M3905 gives call status information; the lower
display area is a two-line feature information display (see figure below).
Note: Refer to “Your Telephone’s Controls” on page 15 for more information on the
display and specialized key information.
Optionsꢀ
ConIntrFlwꢀ
NightSvcꢀ
ꢀ
ꢀ
Dir/Logꢀ
ꢀAppsꢀ
ꢀ
2639ꢀ
Line/Feature
Key Status
ꢀ
ꢀ
AutoDialꢀ
2637ꢀ
ꢀ
ꢀ
Aug 20 5:48 Pꢀ
ꢀ
NORTEL NETWORKSꢀ
ꢀ
Date/time display
Call party info
Feature Status info
Options info
5 New callersꢀ
ꢀ
Forwardꢀ
ꢀ
CallersꢀRedialꢀ
ꢀ
ꢀ
Quit
Copy
553-9076C
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Options List
Options List
The Options List allows you to customize certain characteristics of your phone.
Screen prompts take you step-by-step through procedures and keep you informed on
the status of the following settings: Language, Change feature key label, Screen
contrast, Volume adjustment, Ring type, Call log options, Live dial pad, Preferred
name match, Area code set-up, Call timer enable, Date/time format, Key click enable,
Headset type, Headset port on call, Headset port external alerter, and Display
diagnostics.
To change any option’s setting:
1. Press the Options Key.
Options
2. Use the Navigation Keys to scroll up or
down through the options list.
3. Press the Select Key when the desired
Select
option is highlighted.
4. Change the option’s settings. Refer to
the following pages for details. The
display also provides you with
information to adjust your selection.
5. Press the Done Key to save your
Done
changes.
6. Press the Quit Key or Options Key to
Quit
exit.
or
Options
Note: If you press the Quit Key or Options Key before you press the Done Key, you
exit the Options List without saving your changes.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Options List
Select a language
The display is available in multiple languages. After you select Language. . . from
the Options List menu;
1. Use the Navigation Keys to highlight
the desired language (e.g., German).
Deutsch
2. Press the Select Key.
Select
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Change a Feature Key label
From the Options List you can change the name on the Programmable Line
(DN)/Feature Keys (self-labeled). These keys are located on both sides of the top
portion of the display area.
To change a Feature Key label:
1. Press the down Navigation Key once to
highlight Change feature key label.
Change feature key label
2. Press the Select Key.
Select
This action takes you to the Feature
Key menu and highlights Change
feature key label.
3. Press the Select Key again.
Select
The prompt asks you to select the
Feature Key you want to change.
4. Press the Programmable Line/Feature
AutoDial
Key whose label you want to change
(e.g., AutoDial).
5. Press the Dial Pad Key that is printed
with the first letter in your new label.
Press the key until the correct character
appears.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Options List
Note: Use the Case Key to change the case of the letter, as needed. Press the Up Nav-
igation Key to access special characters you may want to include in the label. Use the
Navigation Keys to locate the character you want to include. Press the Select Key to
choose the highlighted character. Press the Return Key to return to label entry with-
out selecting a special character.
6. Press the right Navigation Key once to
move the cursor (so you can enter the
appears.
7. Repeat steps 5 and 6 until you have
changed the entire label.
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Note: For a detailed example of using the dial pad to enter text into your M3905 Call
Center telephone, see “Add a Personal Directory entry” on page 86.
To restore one key label to the
original:
1. From the Feature Key menu, use the
down Navigation Key to highlight
Restore one key label.
Restore one key label
2. Press the Select Key.
Select
3. Press the Programmable Line
Purchasing
(DN)/Feature Key (self-labeled) that
you want to restore to the original label
(e.g., Purchasing).
Press the Done Key to return to the Options List menu. Press the Quit Key or
Options Key to exit.
Note: You cannot change the label on the primary DN. You can press the Shift Key, if
the label you want to change is on the second layer of Programmable Line/Feature
Keys (self-labeled).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Options List
Adjust Screen contrast
The Screen contrast option allows you to adjust the contrast of the display on your
telephone. After you select Screen contrast from the Options List menu;
From the Contrast screen, press the
ꢀꢀꢀLower
Higher
Lower Key to decrease the display
contrast level, or press the Higher Key
to increase the display contrast level.
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Adjust volume
Use the Volume adjustment option to select a comfortable sound level for the
various audio signals.
Note: After you select Volume adjustment. . . from the Options List menu, a list of
adjustable items for your telephone model appears. It is recommended that you adjust
these parameters while you are on a telephone call so that you can judge the impact of
the changes your are making.
To adjust the Ringer volume:
1. Select Ringer from the Volume menu.
Ringer
2. Press the Lower Key to decrease the
ꢀꢀꢀLower
Higher
ringer volume, or press the Higher Key
or
to increase the ringer volume.
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Use the procedure above to adjust the volume on the following items:
Buzzer
Headset listen
Headset talk
Speaker
Handset listen
Headset sidetone
Note: Headset sidetone is the sound of your
own voice that you hear in the headset
speaker.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Options List
Choose Ring type
The Ring type option allows you to choose from among the various ringing sounds
available for your telephone model. After you select Ring type. . . from the Options
List menu;
1. Use the Navigation Keys to scroll
through the list of ring types.
Ring type 3
2. Press the Play Key to sample a ring
Play
tone.
3. Press the Select Key to activate the
Select
desired ring type.
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Select Call Log options
The Call Log options setting provides a choice of logging all incoming calls, logging
only the unanswered calls, or not logging any calls. The Call Log holds up to 100
different incoming entries. After you select Call log options from the Options List
menu;
From the Log options menu, use the
Navigation Keys to highlight and select
either:
Log all calls
Log all calls
or
or
Log unanswered calls
Log unanswered calls
Note: New call indication must be set to
On, if you want Call Log notification.
Press the Done Key to save the selection. Press the Quit Key or Options Key to exit.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Options List
Live dial pad
The Live dial pad option allows you to press any dial pad key to automatically access
a dial tone. After you select Live dial pad from the Options List menu;
From the Live dialpad screen, press the
ꢀꢀꢀꢀꢀOn
ꢀꢀꢀꢀꢀOff
On Key to turn on Live dial pad, or
press the Off Key to turn off Live dial
pad.
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Preferred name match
The Preferred name match option displays the names of incoming and outgoing
callers as stored in your Personal Directory, if the telephone number matches the one
stored in your directory. This option allows you to personalize the displayed names
for incoming and outgoing calls. After you select Preferred name match from the
Options List menu;
From the Name match screen, press the
ꢀꢀꢀꢀꢀOn
ꢀꢀꢀꢀꢀOff
On Key to turn on Preferred name
match, or press the Off Key to turn off
Preferred name match.
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Area code set up
Using the Area code set-up option causes the Callers List and Calling Line ID
(CLID) display to show the number/extension followed by the area code/prefix in
parenthesis. This makes it easier to identify local calls and internal calls. You can
define up to three codes. After you select Area code set-up from the Options List
menu
Use the Navigation keys to place your
1st Code: 408
cursor in the first line and enter an
2nd Code:
area/country code of your choice.
3rd Code:
Note: You can enter up to three codes of your
choice.
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Options List
Call timer
The Call timer enable option measures how long you are on each call. After you
select Call timer enable from the Options List menu;
From the Call timer screen, press the
ꢀꢀꢀꢀꢀOn
ꢀꢀꢀꢀꢀOff
On Key to turn on the Call timer, or
press the Off Key to turn off the Call
timer.
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Date/time format
There are eight Date/time formats. Four formats are based on the 12-hour clock and
four are based on the 24-hour clock. After you select Date/time format. . . from
the Options List menu;
Use the Navigation Keys to scroll
through the eight formats. The sample
formats appear on the upper-right side
of the display area.
1ormat 3
Press the Done Key to select the highlighted format. Press the Quit Key or Options
Key to exit.
Key click
The Key click option causes the handset or speaker to produce a clicking sound when
you press the telephone keys. After you select Key click enable from the Options
List menu;
From the Key click screen, press the On
Key to turn on Key click, or press the
ꢀꢀꢀꢀꢀOn
ꢀꢀꢀꢀꢀOff
or
Off Key to turn off Key click.
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Options List
Headset type
The Headset type option allows you to select one of the three different headset types:
Type 1, Type 2, or Amplified. Select the setting that works best for the headset that
you are using. For more information, see“Call Center headset interface” on page 32).
After you select Headset type from the Options List menu;
From the Headset type menu, use the
Navigation Keys to highlight and select
either:
Type 1 headset
Type 1
or
or
Type 2 headset
Type 2
or
or
Amplified
Amplified headset
Press the Done Key to save selection. Press the Quit Key or Options Key to exit.
Headset port on call
The Headset port on call option requires that a lamp-type accessory be connected to
the headset port. When the Headset port on call option is activated and the user is on a
call, the lamp lights providing an indication that a call is in progress. After you select
Headset port on call from the Options List menu;
From the On call screen, press the On
ꢀꢀꢀꢀꢀOn
ꢀꢀꢀꢀꢀOff
Key to turn on Headset port on call, or
press the Off Key to turn off Headset
port on call.
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Note: Additional equipment is required to implement this option. For more informa-
tion please contact your Nortel Networks distributor.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Options List
Headset port external alerter
When the Headset port external alerter option is activated, it supports a visual or
audible alerter and/or recorder device. This device plugs into the Headset port, which
is located on the bottom of the telephone. After you select Headset port ext
alerter from the Options List menu;
From the External alerter screen, press
ꢀꢀꢀꢀꢀOn
ꢀꢀꢀꢀꢀOff
the On Key to turn on Headset port
external alerter, or press the Off Key to
turn off Headset port external alerter.
or
Press the Done Key to save changes. Press the Quit Key or Options Key to exit.
Note: Additional equipment is required to implement this option. For more informa-
tion please contact your Nortel Networks distributor.
Display diagnostics
The Display diagnostics option tests the functionality of your telephone’s display
screen and indicator lights. This option also provides information on the firmware
currently in use on your M3905 Call Center telephone. After you select Display
diagnostics from the Options List menu;
Use the up or down Navigation Key to
scroll through the list and view the
changing display screens.
Press the Done Key to return to the Options List menu. Press the Quit Key or
Options Key to exit.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Center headset interface
Call Center headset interface
The M3905 is compatible with most headsets.
Freeing your hands while on the job
The Headset Key controls a headset that is connected to the headset jack. The
Headset Key is a Fixed Feature Key on the lower left of the phone. The headset jack
is on the back of the M3905 telephone set. Both direct connect, or unamplified
headsets, and amplified headsets can be used with the M3905 headset jack.
Headset, Handset, and Supervisor Jacks. The headset and handset jacks
are located on the back of the M3905 telephone set. The jack on the side of the
M3905 telephone set is the Supervisor jack that is used in conjunction with the
Supervisor Observe Key.
Switching between the handset and the headset
If you use a headset, the M3905 has a Headset Key to turn the headset on and off. The
Headset Key is used to switch between the headset and the handset mode of
operation. The LED lights steady to indicate that you are in headset mode.
If you have the handset option installed, press the Headset Key to enter handset
mode. The Headset Key LED goes off, and all calls are presented to the handset. Lift
the handset and press a DN or In-Calls Key to receive calls. To make outgoing calls
with your handset, lift the handset and press an Individual DN key to receive dial
tone. If you wish to return to headset mode, press the Headset Key. The Headset Key
LED will go on, and all calls will be presented to the headset.
Headset Options Feature. There are three settings provided for the headset
connection. Use the Options feature to choose Type 1, Type 2, or Amplified to adjust
the gain that works best with the type of headset that you are using. For an amplified
headset, choose the Amplified Headset setting in the Options list.
Volume Control with Amplified Headset. To control the volume, use the
volume control bar on the telephone and the switch on the amplified headset. Adjust
the telephone volume before adjusting the headset volume. To provide the best
communication with the least amount of distortion, the amplifier should have a higher
setting than the telephone volume control.
Volume Control with Direct Connect, or Unamplified Headset. To
control the volume, use the volume control bar on the telephone or adjust the volume
setting in the Options Menu.
Note: Refer to your distributor for the latest product bulletin from Nortel Networks
recommending headset types for use with the M3905 Call Center Telephone.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Center agent/supervisor features
Call Center agent/supervisor features
This section describes features and procedures for both the Call Center agent and the
supervisor.
Agent Login
1. Press the Make Busy Key until the indi-
cator turns on.
/
2. Press the In-Calls Key.
/
3. Dial your four-digit agent ID. You are
automatically in the Not Ready state and
in the current ACD queue.
4. Press the Not Ready Key when you are
ready to accept ACD calls. The LED for
the Not Ready Key goes off.
/
Note: You must press the Headset Key the
first time you log in, if using a direct connect
headset.
Agent Login Enhancement
This feature provides two new options to ensure that only assigned agents are able to
log into an ACD group:
• Partitioning of agent login identification numbers between customer groups
• Agent login password option
Each time an agent enters an identification number, a check is made to determine if
the set being used is associated with the same customer group as the identification
number.
If this check is successful and the password option has been assigned, the agent
receives a special dial tone. The agent must enter a four-digit password (a number in
the range 0001 through 9999). When the password is accepted, the agent is logged
into the ACD group. If a checks is unsuccessful, a reorder tone is given.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Center agent/supervisor features
If the password option is assigned:
After you enter your four-digit agent ID, you
receive a special dial tone. Enter you
four-digit password.
If your password is accepted, you are logged
in. If the system does not accept your
password, you will hear reorder (fast busy)
tone.
Agent Logout
Press the Make Busy Key and disconnect
the headset. The LED indicator lights
continuously.
/
Pressing the Make Busy Key once causes
the lamp to light solid “on,” indicating that
Make Set Busy is active for all directory
number appearances on the set.
Pressing the Make Busy Key a second time
causes the lamp to flash, indicating Make Set
Busy is active for the ACD In Calls Key, but
deactivated for the secondary directory
number(s) on the set.
Note: If you press the Make Busy Key while
on an ACD call, you will be logged out auto-
matically when the call is finished.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Agent features
Agent features
This section explains the features that are available to ACD agent positions.
Activity Code Fixed Key to activate Line-of-Business code
The Line-of-Business (LOB) code feature allows the ACD user to enter a three-digit
code to record the type of activity the agent is performing.
The code is sent to a customer-premises downstream processor through the MIS
interface. The ACD supervisor assigns the codes.
The Meridian SL-100 switch tracks items such as the number of specific types of
calls, and the holding times for these calls. Use the Activity Code Fixed Key or the
LOB Code Programmable Feature Key to activate the LOB code.
1. While on an active ACD call, press the
Activity Key.
/
or
LOBCode
2. Dial the three-digit code which reflects
the type of call you are handling. The
digits are shown on the display as you
enter them. If you make a mistake, press
the Activity Key again and re-enter the
correct digits.
Repeat steps 1 and 2 if doing multiple
tasks. You can enter up to three activity
codes per call.
Answer Call Center Calls
The In-Calls Key is the lower right-hand key on the ACD terminal set. The In-Calls
Key is the main ACD extension (Primary DN). The In-Calls Key allows the ACD
agent to answer the next queued call on the primary DN. This key presents only ACD
calls. To disconnect from an ACD call, the agent presses the Goodbye Key or the
In-Calls Key a second time.
To make outgoing calls and to accept non-ACD calls, the ACD user can have one or
more non-ACD DNs (Individual DNs).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Agent features
Note 1: If you have ACD call forcing turned on, you hear an audible tone and the call
is automatically sent to your In-Calls Key. You do not pickup the call, it is sent to your
line.
Note 2: If you have the handset option and you pickup the handset, you must also
press a DN key, otherwise the handset is not operable. You can terminate a call by
replacing the handset in the cradle.
Your phone rings and the In-Calls
indicator flashes:
To answer an ACD call, press the In-Calls
Key. The caller is connected and the
indicator lights continuously.
/
To end an ACD call:
Press the Goodbye Key.
or
/
Wait for the caller to terminate the call.
Call Forcing
The Call Forcing option automatically connects incoming ACD calls. An agent does
not have to press the In-Calls Key. When Call Forcing is on, the agent has a time
interval between each incoming call that is defined by the system administrator. After
the time interval is up, the agent hears a tone through the headset and Call Forcing
automatically connects the incoming call to the agent.
You hear a short tone. The In-Calls indicator
lights continuously and the ACD call
automatically goes to the agent position.
/
Multistage Queue Status Key/Lamp
The ACD Multistage Queue Status (MSQS) Key/Lamp feature provides information
about the incoming call queue of any ACD group. Three thresholds, T1, T2, and T3,
are created by your supervisor. The thresholds represent wait time in queue of the next
call to be answered or number of calls in queue.
The MSQS Key/Lamp feature can be activated by any of the following actions:
• you log in
• an ACD call is presented to your position
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Agent features
• you activate the Not Ready feature
Once activated, the lamp status reflects the queue status as shown in Table 2.
Note: The MSQS feature can be assigned to a fixed key with the optional cap
Dsplay Queue, or it can be assigned to a programmable line/feature key with
the label DisplayQue.
Table 2: MSQS lamp and queue status
Indicator
Queue Status
Off
On
Less than or equal to T1
Greater than T1 and less than T2
Greater than T2 and less than T3
Greater than T3
Flash
Wink
Display Queue Threshold (MSQS enhancement for agents)
The Display Queue Threshold feature allows an agent or supervisor to view the
number of calls waiting in the queue, or how long the first call in the queue has been
waiting. The Display Queue Threshold feature can be assigned to a fixed key with the
optional key cap Dsply Queue, or it can be assigned to a programmable line/feature
key with the label DispQTh.
To display the queue threshold for
your Meridian SL-100 ACD group:
1. Press the Dsply Queue Key, or the
Dsply Queue
DispQTh programmable line/feature
key.
/
or
Display Que
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Agent features
T1
T2
T3
CALLQꢀ
3
Number of
calls in
the queue
Forward Callers Redial
Quit
Copy
553-9094
2. Your display shows information similar
to the example above.
The labels T1, T2, and T3, represent the
threshold wait time for the call at the
front of the queue or the number of calls
in the queue. The number below
CALLQ indicates the number of calls in
the queue (in some systems CALLQ is
replaced by WAIT, which indicates the
actual waiting time in seconds, for the
first call in the queue).
5551234ꢀ
T200
Number of
calls in
the queue
CALLQ0
026ꢀ
Forward Callers Redial
Quit
Copy
553-9095
3. In some systems, a summary of the
queue threshold is shown on the display
each time a call is presented to your
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Agent features
position. The information includes the
threshold level, the threshold type
(CALLQ or WAIT), and the current
value of the threshold.
In some systems, this information is also
displayed when the Not Ready feature is
active. The information is updated
regularly and is visible until the Not
Ready feature is turned off.
Emergency Key
When you have an emergency
situation:
Press the Emergency Key. The indicator
flashes while your supervisor is called.
When your supervisor picks up the call, the
LED indicator lights continuously and you
have a three-way conference with your
supervisor, or you can automatically connect
a tape recorder in the event of a threatening
or abusive call.
/
The Emergency lamp flashes on the Agent
set, and the Answer Emergency lamp flashes
on the Supervisor set.
Note: The display shows information about
the call. Write down this information for
future reference, before you press the
Emergency Key.
Make Busy
The Make Busy feature logs an agent out when going for breaks, lunch, or end of day.
When the Make Busy feature is in use, the ACD agent must log back into the ACD
queue, if the agent has an agent log in.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Agent features
To make the set busy:
Press the Make Busy Key once. The
indicator lamp turns on steady and “Set Busy
Activated” is displayed.
/
To make your phone available for
incoming secondary directory
number calls:
Press the Make Busy Key again. The
indicator lamp is flashing and the display
goes away.
/
To put your phone into Not Ready
state (after making it busy):
1. Press the Make Busy Key again.
2. Press the InCalls Key.
/
3. Dial your Agent Id. You are
automatically in the Not Ready state and
in the current ACD queue.
4. Press the Not Ready Key when you are
ready to accept ACD calls.
/
Note: If you are using an agent ID, you must
log in again to take ACD calls.
Not Ready Key
The agent uses the Not Ready Key, when performing post-call work.
When you need time to catch up on
post-call processing work:
1. Press the Not Ready Key. This takes
you out of the queue.
/
Note: The non-immediate cutoff option must
be enabled in the Meridian SL-100 system so
that an active call is not terminated when the
Not Ready Key is pressed.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Agent features
When you are ready to take ACD
calls again:
2. Press the Not Ready Key again.
/
Answer or Make Non-ACD Calls
The individual DN allows the user (agent) to make outgoing calls and to receive
non-ACD incoming calls. If the agent does not have an active call when the Individual
line flashes, the agent can press the individual DN line and answer the call.
To make a non-ACD call:
1. Press an Individual DN Key.
2498
2. Dial the number you wish to call.
To answer a non-ACD call, when the
telephone rings:
Press the DN Key next to the flashing
indicator. You are connected to your
non-ACD caller.
2498
Contact your supervisor
To answer your supervisor when your
phone rings and the Supervisor
indicator flashes:
Press the Supervisor Key.
/
If you are on a call and hear a buzz
and the Supervisor indicator flashes:
1. Press the Hold Key.
/
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Agent features
2. Press the Supervisor Key.
/
To call your supervisor:
Press the Supervisor Key. If you are on a
call, this automatically puts the call in
progress on Hold.
/
To return to the ACD call:
Press the In-Calls Key.
/
To Conference a call with your
Supervisor, during a call in progress:
1. Press the Emergency Key. The Emer-
gency indicator flashes while your
supervisor is called.
/
2. When your supervisor answers, the
Emergency indicator goes on. You now
have a three-way conversation with the
supervisor and the caller.
Walkaway and Return from Walkaway
Use this feature when you need to leave your desk during an ACD call, during a
non-ACD call, or while in the Not Ready state.
To Walkaway while in Not Ready
mode (Not Ready LED or LCD
indicator is on, and Not Ready is
shown on the display):
1. Press the Not Ready Key.
/
2. Enter the three-digit unavailability code
provided by the system administrator.
The Not Ready indicator remains on
steady.
3. Disconnect the headset, if leaving the
Agent position.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Agent features
Note: The non-immediate cutoff option must
be enabled in the Meridian SL-100 system,
so that an active call is not terminated when
the Not Ready Key is pressed.
To return from Walkaway:
1. Connect the headset.
2. Press the Not Ready Key next to the
flashing indicator.
/
Note 1: If a caller disconnects before you
return from Walkaway, the Not Ready
indicator flashes. When you return from
Walkaway, you are in Not Ready mode.
Note 2: On the Meridian SL-100 system, a
call on hold prevents you from activating the
Not Ready Key.
Transfer to InCalls Key
This feature enables the Call Center agent to transfer an incoming Call Center or ACD
call directly to another agent’s InCalls Key in the same customer group. When the
second agent is idle at the time the call is transferred, the call is presented to that
agent’s InCalls Key; otherwise, the call is queued in a Call Transfer Queue (CTQ).
To transfer an incoming Call Center
or ACD call to another agent’s
InCalls Key:
1. Press the Transfer Key. The other party
is on hold, and you receive dial tone.
The LCD indicator light flashes continu-
ously.
/
2. Dial the second agent’s InCalls Key
directory number.
3. Press the Goodbye Key.
/
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Center supervisor features
Call Center supervisor features
You can assign any feature listed in the “Agent features” section to the supervisor’s
telephone (except Supervisor key), as well as the features described in this section.
Agent Keys
The Call Agent Keys feature allows you to connect to each agent position. Each
Agent Key is linked to a particular agent position. Press the Call Agent Key then the
Agent Key for the particular ACD agent, or dial the secondary or individual agent
number, to be connected to a particular agent position.
Agent Keys also function as an Agent-Status Lamp for each agent and allow you to
track the status of each position in the group. The following shows the meaning of the
LCD indicator associated with an Agent Key:
Indicator
Agent Status
OFF
Agent position unmanned (Make Set Busy Activated)
Agent handling an ACD call
ON
FLASH
WINK
Agent waiting on an ACD call
Agent busy on post-call work (Not Ready Activated)
Answer Agent
When your phone rings and the
Answer Agent indicator flashes:
1. Press the Answer Agent Key.
/
To disconnect an agent call:
2. Press the Goodbye Key.
/
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Center supervisor features
Answer Emergency
When your phone rings steadily for
30 seconds and the Answer
Emergency indicator flashes:
1. Press the Hold Key if you intend to
return to the call in progress.
/
/
2. Press the Answer Emergency Key.
To disconnect from the emergency
call:
Press the Goodbye Key.
/
Call Agent
To call an agent:
1. Press Call Agent Key.
Call Agent
/
2. Press the Agent Key assigned to the
Agent1
agent or dial the agent’s position ID.
or
To leave Call Agent state:
Press the Goodbye Key.
/
Use Supervisor Observe and the Supervisor Headset Jack
The Supervisor Observe Key is located in the upper left corner of the M3905 ACD
telephone. It has an associated LED.
A supervisor can listen in on an active call at an ACD terminal by connecting the
headset into the jack near the Supervisor Observe Key on an agent’s telephone. The
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Center supervisor features
LED remains dark to denote that the supervisor can hear the conversation while the
microphone for the supervisor’s headset is muted.
To use the Supervisor Observe feature, the supervisor plugs the headset into the agent
telephone.
To use the Supervisor Observe
feature for a two way conversation:
While the headset is plugged in, press the
Supervisor Observe Key. The LED lights
continuously and the supervisor can
participate in the conversation.
To mute the Supervisor headset:
Press the Supervisor Observe Key a second
time and then put the supervisor headset on
mute. The LED turns off.
Controlled Interflow
When the call backlog or the waiting time in the queue exceeds a set threshold,
Controlled Interflow forwards calls to a predefined target queue.
The supervisor activates Controlled Interflow when the waiting time for the queue
exceeds its threshold.
To activate Controlled Interflow:
Press the Controlled Interflow Key. The
ConIntrFlw
indicator flashes and excess calls are routed
to the destination.
To stop Controlled Interflow:
Press the Controlled Interflow Key again.
ConIntrFlw
Night Service
To enter Night Service:
Press the Night Service Key.
NightSvc
The indicator lights continuously. All calls in
the queue and new calls receive Night
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Center supervisor features
Service, or are handled in a way designed for
your system.
Exit Night Service:
Press the Night Service Key a second time.
NightSvc
The indicator goes off. New calls enter the
queue.
Observe Agent
To observe an agent:
1. Press the Observe Agent Key. The
Observe Agent indicator goes on.
/
2. Press the Agent Key or dial the agent’s
position InCalls number. You can listen
to the agent and caller’s conversation.
Agent1
or
Repeat this step to observe another
agent.
To talk to an agent you are observing,
and participate in the conversation:
1. While observing an agent. Press the
Call Agent Key. You now have a
Call Agent
/
conference with the agent and the caller.
To leave the Observe state:
2. Press the Goodbye Key.
Note: You cannot observe an agent if the
agent’s call is on hold or if no calls are in
progress.
/
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Center supervisor features
Display Agent Status
The Display Agent feature gives you a summary of the current status of all agent
positions for which you have Agent Keys information displayed.
1. Press the Display Agent Key. The dis-
play shows a summary of the current
status of all agent positions in the ACD
group. If you supervise other ACD
groups, you need a Display Agent Key
for each group.
DisplayAgt
2. Press the Goodbye Key to clear the
display.
/
Agent
positions not
logged in
Agent positions
on active ACD
NMD IDL NR
SDN ACDꢀ
calls
1
2
1
0
8
Agent
positions
available to
receive calls
Agent positions
logged in but
currently on
Forward Callers Redial
non-ACD calls
Agent postions
logged in but
temporarily unable
to receive calls
Quit
Copy
553-9096B
3. Your display shows information similar
to the example above.
Note: The information is displayed for 12
seconds, until you press another feature key,
or until a call is presented on your In-Calls
Key.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Center supervisor features
Display Queue Status
The Display Queue Status feature allows you to access the status of calls in an ACD
Queue. Information displayed includes: number of calls waiting in the queue, number
of agents’ positions occupied for that queue, and the call waiting time (seconds) for
the oldest call in the queue. To display information on your ACD queues:
1. Press the Dsply Queue Key or Waiting
Calls Key for the ACD group you wish
to display.
or
DispQue
Dsply Queue
/
Number of
calls waiting
in the ACD
call queue
INC0 LOG0 AGT WAITꢀ
14
1
0
6
Number of
calls logically
queued for
this group
How long (in seconds)
the first call in the highest
priority queue has been
waiting for an agent
Forward Callers Redial
The number of agent
positions available to
answer calls
Quit
Copy
553-9096C
2. Your display shows information similar
to the example above.
Note 1: The Dsply Queue Key can be
configured on your M3905 ACD telephone
as a fixed key (using the Display Que key
cap) or as a Programmable Line/Feature Key
(self-labeled) that displays DisplayQue.
Note 2: The information is displayed for 12
seconds, until you press another feature key,
or until a call is presented on your In-Calls
Key.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Your telephone non-ACD call features
Your telephone non-ACD call features
This section describes some non-ACD features commonly used for call
processing. Your telephone system administrator assigns features to your
programmable feature keys. Whenever this guide describes a procedure that
requires special codes, ask your telephone system administrator to provide
these to you.
To access a feature, press a Feature Key or enter a Feature Access Code (FAC).
The system administrator supplies you with Feature Access Codes.
Note: In order to use a feature described in this section, your system software
must support the feature and the feature must be assigned to your telephone.
Check with your system administrator for more details.
Make a Call
This section describes features you can use when making a call. There are
several ways to make a call from your M3905 Call Center Digital Telephone.
Note: If your M3905 ACD telephone is equipped with a handset, you must lift
the handset and press a DN or ACD DN to get a response in the handset.
To make a call:
1. Press the Individual DN Key
2498
(non-ACD Key).
2. Dial the number.
Note: If you are not in Not Ready or Make
Busy mode while you are on a call on your
Individual DN line, the call is put on hold
enabling you to answer the ACD In-Calls
line. However, if you are on an ACD call and
a call comes in on your Individual DN line,
you cannot put your ACD call on hold to
answer your Individual DN line call.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Make a Call
Predial feature
The Predial feature allows you to enter and preview a number of up to 31 digits and
make corrections before you dial the number.
To use Predial:
1. Dial the number.
Note 1: If you are calling an external or long
distance number, be sure that the appropriate
access codes are included.
Note 2: Press the Pause Key to insert a
1.5-second pause in the dialing string.
2. Press an Individual Line (DN) Key to
2637
receive dial tone.
The displayed predialed number is
automatically dialed.
Note: You cannot use the Predial feature if
the Live dial pad feature is active.
Auto Dial
Auto Dial allows you to dedicate a feature key to a specific telephone number.
When the Auto Dial Key is pressed, the number is dialed automatically.
To program Auto Dial:
1. Select an Individual DN Line.
2498
2. Press the associated Auto Dial Key.
Purchasing
This automatically dials the number.
To use the Auto Dial number:
1. Press the configured Auto Dial Key.
AutoDial
The number appears on the display.
To display an Auto Dial number:
1. Press the appropriate Auto Dial Key.
AutoDial
2. Dial the telephone number (including
access code) you want to store on the
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Make a Call
Auto Dial Key.
3. Press the Auto Dial Key a second
time. The number is stored on the key
you selected.
AutoDial
Note: Use the Change feature key label
option (Option Key) to personalize the
Auto Dial label.
Redial Last Number Called
Last Number Redial allows you to automatically redial the last number you dialed.
Last Number Redial:
1. Press a line key.
2498
2. Press the Octothorpe (#) Key two
times. The last number dialed is
automatically redialed.
Note: Your system administrator must
configure this feature for your telephone.
Activate Ring Again
The Ring Again feature allows you to automatically redial a number that is busy. If
you receive a busy tone when you try to reach someone in your private network, press
Ring Again. The activated Ring Again features provides you with an audible tone
notification when that person is available or has used the telephone.
To use Ring Again:
1. Dial an individual DN and receive a
busy tone.
2. Press the Ring Again Key.
RingAgn
The screen displays RING AGAIN IS
ACTIVE.
To call a Ring Again party when you
receive notification:
When the number you want to reach is
available you hear the Ring Again tone.
1. Press the Individual DN Key, you
2498
receive dial tone.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Make a Call
2. Press the Ring Call Key.
RngCall
To cancel Ring Again before
notification
Press the Cancel Ring Again Key.
CanclRA
The screen displays RING AGAIN IS
CANCELLED.
Speed Call
Speed Call allows you to automatically dial frequently called telephone numbers by
entering a one- or two-digit code. Contact your system administrator to determine the
capacity of your Speed Call list. A telephone designated as a Speed Call Controller
can program or edit the Speed Call list. This feature must be enabled by your system
administrator.
To store or change a Speed Call
number:
1. Press the Speed Call Controller
Key. The screen displays ENTER
CODE, THEN NUMBER.
SpcCtrl
2. Dial a one- or two-digit code.
Use the Delete Key if you make a
mistake. Use the Cancel Key to
leave the screen without storing a
speed call number.
Note: A dash is automatically inserted after
the required number of digits have been
entered.
3. Dial the associated telephone
number. Use the Delete Key or
Cancel Key if you make a
mistake. Use the Done Key to
leave the screen without storing a
speed call number.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Make a Call
Note 1: Dial the access code (if required)
followed by the internal, external, or
long-distance telephone number.
Note 2: Press the Pause key to insert a
1.5-second pause in the dialing string.
4. Press the Done Key to save the
Done
code and number.
To make a Speed Call:
1. Lift the handset.
2. Press the Speed Call Controller
Key or the Speed Call User Key.
The screen displays ENTER
CODE.
SpcCtrl
SpcUsr
or
3. Dial the Speed Call code
assigned to the telephone
number. The number is
automatically dialed.
System Speed Call (Network Speed Call)
System Speed Call (Network Speed Call) allows you to dial Speed Call codes and
override all restrictions while on the call. The System Speed Call feature is set up
by your system administrator on the system. It is a speed dial number that is
common to many users, therefore it is set up on the system, not your desktop
telephone.
To make a System Speed Call:
1. Press the Individual DN Key.
2498
2. Press the System Speed Call User
Key or System Speed Controller
Key.
SSCuser
SScCtlr
or
3. Dial the Speed Call code assigned to
the number you want to dial.
The number is automatically dialed.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Make a Call
Intercom Call
The Group Intercom feature connects a group of people through a Gpintercom
Key. You can use the Group Intercom feature to call a member of your intercom
group by pressing a one-, two-, three-, or four-digit code (depending on the size of
your group). Your telephone can be a member of several different Group Intercom
groups. Each group must have a different Gpintercom Key. Your system
administrator must set up the intercom group(s).
To make an Intercom call:
1. Press the Gpintercom Key.
Gpintercom
2. Dial the intercom code digit(s).
To answer a Group Intercom call
while on a line other than your
Gpintercom line:
1. Press the Hold Key to put the
current call on hold.
/
or
or
Press the Goodbye Key to end
the call.
/
2. Press the Gpintercom Key and
Gpintercom
begin to speak.
Group Intercom All Call
The Group Intercom All Call feature connects members of a Group Intercom
group with a conference. You can simultaneously page up to 29 predefined
members of the same Group Intercom group. Group members hear the page
over their telephone set speaker and can respond to the originator, if required.
Your system administrator must set up this feature.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Make a Call
To make a Group Intercom
All Call conference:
1. Press the Gpintercom Key.
Gpintercom
2. Press the Octothorpe (#) Key to
activate the Group Intercom All
Call feature. You hear ringing.
Note: Members can enter or leave the
conference, or you can page the mem-
bers.
3. To page members who have not
answered, press the Gpintercom
Key again to establish the
Gpintercom
one-way paging link.
4. Make the page announcement,
which is heard by members over
their built-in speaker.
5. Press the Gpintercom Key again to
Gpintercom
close or lock the conference.
Note: You can only page once. Members can
enter or leave the conference before it is
locked. When it is locked or closed, any
additional Gpintercom presses are ignored.
Intercom Call on a Predesignated Set
The Intercom feature allows you to directly, automatically terminate on a
Predesignated telephone set. Your system administrator must set up this feature.
To make an Intercom call to a
Predesignated Set:
1. Press the Intercom Key. You hear ring-
Intercom
ing.
2. The other party hears ringing and their
Intercom Key lamp flashes.
3. The other party can answer the call by
pressing the Intercom Key.
or
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Answer a Call
After a two-second delay, an automatic
connection is made, and the other party can
hear the message over the speaker.
Individual Page from Group Intercom
The Individual Page from Group Intercom feature allows a Group Intercom member
to page another group member using the Handsfree speaker.
To make an Individual Page from
Group Intercom:
1. Press the Gpintercom Key.
Gpintercom
2. Dial the appropriate Group Intercom
code digits.
3. After the first ring, press the
Gpintercom Key again. A
one-way connection is
established, and you can talk over
the speaker.
Answer a Call
When you receive an incoming call on your Individual DN Key, your
telephone rings and the LCD indicator flashes.
To answer a call:
Press the Individual DN Key to
answer a non-ACD call. The icon
beside the Individual DN Key
flashes.
2498
Note: If you have the handset option and you pickup the handset, you must
also press a DN key, otherwise the handset is not operable. However, you can
terminate a call by replacing the handset in the cradle.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
While you are away from your desk
While you are away from your desk
Call Forward
On an ACD set, Call Forward can only be used on your Individual DN. It
cannot be used in conjunction with your ACD DN. Call Forward allows you to
transfer your Individual DN calls to ring at another DN. If the telephone is in
the process of ringing, you cannot forward that call.
To forward your personal
directory number calls or
change the forward number:
1. Press the Forward Key.
Forward
The previously stored forward
number appears, if one exists,
and the screen displays ENTER
FORWARD NUMBER.
2. If desired, enter a new number.
The existing number is
automatically deleted. If you
make a mistake, use the Delete
Key to delete the previous
digit(s). Press Cancel to leave
this screen without forwarding
your telephone.
3. Press the Done Key to activate Call
Done
Forward.
To view the number that your calls
are being forwarded to:
1. Press the Check Forward Key.
CheckFw
2. Press the Done Key to return to the
Done
previous screen.
This action leaves Call Forward active.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
While you are away from your desk
To cancel Call Forward:
1. Press the Check Forward Key.
CheckFw
2. Press the Cancel Forward Key.
CanclFw
Forward an Internal Call (Call Forward Busy/Don’t Answer
Split)
The Call Forward Busy/Don’t Answer Split feature allows you to:
• Forward an incoming call that originated internally from a DN in the same
customer group as you, to another DN in your customer group.
• Forward an incoming call that originated from a DN outside of your customer
group, to another DN outside of your customer group.
By activating the Call Forward Busy feature your calls are automatically
redirected to another telephone if your DN is busy. By activating the Call
Forward Don’t Answer feature, your calls are automatically redirected to
another station if you cannot answer the calls within a predefined number of
rings. Contact your system administrator to set up this feature, and for the
feature access code (FAC).
To forward an internal call to
a predefined DN when your
individual DN is busy or when
you do not answer within a
predefined number of rings:
Dial the appropriate FAC. You receive
a confirmation tone if the Call
Forward Busy or Call Forward Don’t
Answer activation is successful.
To forward an internal call to
a DN that has not been
predefined by your system
administrator:
1. Dial the appropriate FAC. You
receive a confirmation tone if the
Call Forward Busy or Call For-
ward Don’t Answer activation is
successful.
2. Dial the DN where you want to
forward your calls.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
While you are away from your desk
To cancel Call Forward
Busy/Don’t Answer Split:
Dial the appropriate FAC again. You
receive a confirmation tone.
Call Forward – Remote Activation
On an ACD set, the Remote Call Forward feature works only with your
Individual DN. Remote Call Forward allows you (from any telephone other
than your own) to activate, deactivate, or change call forwarding to a new
destination.
To activate Remote Call
Forward:
1. From a telephone outside the sys-
tem, dial your remote access
directory number and wait for the
prompt.
2. Enter your individual system DN
plus PIN number followed by the
number sign.
3. Enter the Call Forwarding
authorization code followed by
the number sign.
4. Follow the prompts to activate,
deactivate, or change Call
Forwarding to a new destination.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
While on an active call
While on an active call
Place a call on Hold
Use the Hold feature when you are on the line with one party on your
secondary or Individual DN, and a second call comes in on a second line. You
can answer the second call and retain the original non-ACD call by putting it
on Hold.
To place a call on Hold:
Press the Hold Key. The LCD
indicator flashes beside the line
on hold.
/
Note 1: If Automatic Hold is
enabled, the active call is
automatically put on Hold when you
answer the second call.
Note 2: On the Meridian SL-100
system, Automatic Hold is the default
feature.
Note 3: The caller hears music, if
music is configured on your system.
To retrieve a call on hold:
Press the DN Key beside the
flashing LCD indicator.
2498
Transfer a Call
Use the Transfer feature to redirect a call on your Individual DN (non-ACD) to
a third party.
To use the Transfer feature to
direct a call to a third party:
1. Press the Transfer Key. The
other party is on hold and you
receive dial tone. The screen dis-
plays CALL ON HOLD, DIAL
NUMBER.
Trans
61
Download from Www.Somanuals.com. All Manuals Search And Download.
While on an active call
2. Dial the DN number where you
are transferring the call.
3. Press the Swap Key to move
between talking with the original
caller and the new caller.
Swap
or
or
Press the Connect Key to
complete the transfer.
Connect
The two callers are connected
and your telephone is ready to
make or receive new calls.
To go back to the original call,
if the transfer is incomplete or
the person you attempt to
transfer to is unavailable:
1. Press the Goodbye Key.
2. Press the Individual Line (DN)
Key next to the flashing LCD
indicator or icon to reconnect to
the original call.
/
2498
Blind Transfer Recall
Blind Transfer Recall gives you a reminder tone when a call you transferred is not
answered within a specific amount of time.
To use Blind Transfer Recall:
1. Press the Transfer Key. It puts the
Trans
call on hold and you hear dial tone.
2. Dial the number to which you want to
transfer the call.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
While on an active call
If the transferred call is not
answered, your telephone rings:
1. Press a DN Key. You connect back to
2498
the original caller.
2. Press the Transfer Key and repeat the
Trans
transfer (to a different DN), if desired.
Note: Check with your system administra-
tor about the length of your recall timer.
Call Park
Call Park allows a call to be held temporarily, then retrieved from any other DN.
You can park an incoming call, then page the called party. When you use Call Park
you do not tie up a line. Your office may have a System Park DN where most calls
get automatically parked.
To Park a call on your own DN:
1. While on an active call, press the
Park
Park Key.
The screen displays PARK on the first line.
On the next or bottom line, the screen
displays CALL PARKED.
This call is automatically parked into the
system.
/
To Park a call on a DN other than
your own DN:
1. Press the DirectPark programmable
DirectPark
line/feature Key.
2. Dial the DN where you want the call
parked, or press the Octothorpe (#)
Key twice to park the call on the
System Park extension.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
While on an active call
To Park a call using the FAC:
1. Press the Transfer Key.
Trans
2. Dial the Call Park FAC
If you do not want the call parked on
your own DN, dial a DN where you
want to park the call.
To retrieve a parked call
1. Press a DN Key.
2498
2. Dial the Call Park FAC or press
DirectPark
the DirectPark Key.
or
3. Dial the DN where you parked
the call.
Note: If a parked call is not retrieved
within a specified period of time, it
rings back to your telephone or to the
attendant. Check with your system
administrator to determine your speci-
fied period of time.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
While on an active call
Charge a Call or Charge a Forced Call
Charge a Call or Charge a Forced Call allows you to enter a billing number for
charge-back purposes. The account code can be from 2 to 14 digits. You may
be prompted to enter an account code, or you may voluntarily enter an account
code when an incoming call is answered. Check with your system
administrator or supervisor for account codes and the feature access code
(FAC).
To enter an account code
when prompted by the
Meridian SL-100 system:
1. Dial the telephone number you
are calling.
2. When prompted by the telephone
system with a tone, dial the account
code digits.
To enter an account code voluntarily
when an incoming call is answered:
1. Answer the incoming call and ask the
calling party to hold.
2. Flash the hookswitch.
3. Dial the FAC.
4. When you receive dial tone, dial the
account code digits.
5. Flash the hookswitch again to return to
the call.
Inspect Key
The Inspect Key allows you to be on an active call and display a second
caller’s name without interfering with the current call in progress.
Note: If Auto Display is enabled, the Calling Line Identification for the second
call automatically displays.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
While on an active call
To view the name of a second
caller while on a call in
progress:
While on a call, you hear the call
waiting tone.
1. Press the Inspect Key.
Inspect
2498
2. Press the flashing DN Key. The
call waiting information appears
on the display.
Note 1: The display information on the
incoming call does not interfere with the
current call in progress.
Note 2: You can use the Inspect Key with
other feature keys to display information
associated with the feature keys.
Trace a Malicious Call
Malicious Call Hold provides a way for you to trace nuisance calls.
Note: If available on your system, Customer Originated Trace is another fea-
ture that provides a way for you to trace nuisance calls.
To trace a call:
1. Press the Malicious Call Hold
MALCSHold
2498
Key.
2. If you wish to return to the call,
press the DN beside the flashing
LED indicator of the call.
If you do not have a
MALCSHold key:
1. Press the Transfer or 3-way Call
Trans
key.
2. The calling party is placed on hold and
you receive a special dial tone.
3. Dial the MALCShold FAC.
4. You are automatically
reconnected to the calling party.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Incoming calls
Incoming calls
Answer Call Pickup
Call Pickup allows you to pick up a call from any telephone in the same Pickup
Group or another Pickup Group.
To answer a call in your own Call
Pickup Group:
1. Press the DN key.
Pickup
2. Press the Pickup Key.
To answer a call at a specific
extension within your Pickup
Group:
1. Press the DN key.
2. Press the Pickup Key or dial the
DNPickup
or
Directed Pickup FAC.
You will hear a special dial tone.
3. Dial the extension number of the
ringing telephone.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Incoming calls
Call Waiting
Call Waiting lets you put your current call on Hold, while you answer the next call.
For example: The attendant routes an outside call to you when you are already on a
call. Call Waiting allows you to recognize an incoming call and respond to it.
To answer an incoming call while on
another call:
1. Press the Hold Key when you
hear a tone and the call waiting
status icon appears.
/
Note: The Hold Key is optional. You
can just press the Call Wait Key as in
Step 2.
2. Press the Call Wait Key to
Call Wait
answer the call.
To return to your first
telephone call:
1. Press the Hold Key if you want
to put the second call on hold.
/
or
or
Press the Goodbye Key to end
the second call.
/
2. Press the DN key associated with
the first call to continue that
conversation.
2498
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Talk with more than one person
Talk with more than one person
Set up a conference call
You can set up a conference call for up to six people (this includes yourself).
Contact your system administrator to find out the maximum number of people you
can join in a conference on your system. On the M3905 Call Center Telephone, this
feature is available on your Individual DN Key.
To set up a conference call:
1. While on a call, press the Conference
Key. The other party is on hold and
you receive dial tone. The screen dis-
plays CALL ON HOLD, DIAL
NUMBER.
Conf
2. Dial the number of the person
you want to add to the conference
call.
3. Press the Swap Key to move
between talking with the original
caller and the new caller.
Swap
Connect
or
or
4. Press the Connect Key to
complete the conference.
If the person you added to the
conference is unavailable:
1. Press the Goodbye Key.
/
2. Press the Line (DN) Key with the
flashing icon to return to your
original call.
2498
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Talk with more than one person
Call Join
To connect a call on Hold (on
a different line) to your
current call:
Conf
1. Press the Conference Key.
2. Press the key that has the caller
that you want to connect to your
current call.
2270
Connect
3. Press the Connect Key.
The person on Hold joins your
conversation.
Preset Conference
The Preset Conference feature allows you to establish a preset conference with
up to 25 conferees by dialing a specific directory number (DN). When the DN
is dialed, the Preset Conference feature simultaneously rings all of the
preselected conferees. Contact your system administrator to set up the
predefined conferees and obtain the Preset Conference DN.
To activate Preset Conference after
your system administrator sets up the
predefined conferees:
1. Dial the Preset Conference DN digits.
2. When the first conferee answers, the
conference begins. Other conferees
are added to the conference as they
answer.
3. When all conferees disconnect, the
conference is terminated.
Note: At least one member of the
conference must be a telephone on the
Meridian SL-100 system. When all
members of the conference on the
Meridian SL-100 system disconnect, the
conference is terminated.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Call features
Call features
Call features are accessible on Fixed Keys, Programmable Line/Feature Keys
and Programmable Feature Keys.
Use Privacy Release
Privacy Release allows one or more people who share your non-ACD DN to join your
call.
To use Privacy Release in an
established state:
1. Press the Private Release Key while
PrivRls
you are on a non-ACD call. One per-
son can now join the call, if they press
the same non-ACD DN key on their
telephone.
2. Repeat Step 1 above to join additional
appearances of the DN.
To cancel Privacy Release if
another party did not join the call:
Press the non-ACD DN key for which the
Privacy Release feature is active. If
another party did not join the call, the
Privacy Release feature will become
inactive.
2498
Paging
If your system is equipped with a paging system, you can page a person. Check with
your system administrator to find out whether your system has this capability and to
get the Feature Access Code.
To use Paging:
1. Press your non-ACD DN key.
2498
2. Dial the Paging Feature Access Code
(FAC). A network connection is
established with the paging access trunk.
This provides access to loudspeaker
paging equipment.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Call features
Busy Override
The Busy Override feature allows you to gain access to a busy station by
pressing the ExeBusyOvd Key.
To activate Busy Override
after receiving a busy tone:
1. Press the ExeBusyOvd Key.
ExeBusyOvd
Note 1: If Busy Override is valid for
the station being called, you hear
silence.
Note 2: If Busy Override is not valid
for the station being called, you hear a
reorder tone.
2. The connected parties hear a
Busy Override warning tone.
After this tone, a three-way call
connection is established.
3. You can disconnect the third
party from the called party by
pressing the ExeBusyOvd Key
again.
ExeBusyOvd
or
or
You can give a message to the
called party and then press the
Goodbye Key to release from the
call.
/
Note: If the called party has Busy
Override with Call Waiting options,
your call is call waited when active
with Busy Override.
Make an Announcement over the Call Page
Call Page allows you to make an announcement over the page system. To make
a page call, dial the page access code.
Note: When attendant consoles use the Page Key, it overrides the telephones.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Call features
The telephones disconnect and must re-access the page access code.
Connect to Call Page feature:
1. Press an Individual DN key.
2498
2. Dial the page access code.
The connection to the page system is
complete.
Disconnect the Call Page feature:
Press the Goodbye Key.
/
Use Station Camp-on
This feature allows you to extend an incoming call to a busy station. When the busy
station becomes idle, it automatically rings and is connected to the waiting call. If
this feature is activated for the telephone, when a call is transferred to a busy line:
• You receive a visual indication that the line is busy.
• The calling party that is transferred hears ringing (or, if provided, music or an
announcement).
• The busy party hears a call-waiting tone.
If the camped-on call is not accepted, it returns to you after a specified amount of
time. Contact your system administrator for the specified amount of time.
To activate Station Camp-on after
answering an incoming telephone
call:
1. Press Transfer Key. The other party
is placed on hold, and you receive dial
tone. The screen displays CALL ON
HOLD, DIAL NUMBER.
/
2. Dial the destination DN digits.
3. Press the Connect Key to
Connect
complete the transfer.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Class features on IVD sets
Class features on IVD sets
Anonymous Caller Rejection (ACRJ)
This feature allows you to reject incoming calls on your individual DN for
which calling name/number information has been intentionally blocked. Only
calls in which the information is blocked are rejected. This feature is activated
using a feature access code (FAC).
Note: Availability of this feature depends upon your Meridian SL-100 system
software and network connections. Check with your system administrator for
availability of the feature and the FAC.
To activate or turn ON Anonymous
Caller Rejection:
1. Press your Individual DN Key.
2698
2. Dial the FAC digits for feature
activation.
3. A recording or confirmation tone
tells you that Anonymous Caller
Rejection is activated.
To deactivate or cancel
Anonymous Caller Rejection:
1. Press your Individual DN Key.
2698
2. Dial the FAC digits for feature
deactivation.
3. A recording or confirmation tone
tells you that Anonymous Caller
Rejection is cancelled.
Automatic Callback (ACB)
This feature allows you to enter a FAC that automatically sets up a call to the last
DN you dialed on your Individual DN, regardless if the call was answered,
unanswered, or busy.
Note: Availability of this feature depends upon your Meridian SL-100 system
software and network connections. Check with your system administrator for
availability of the feature and the FAC.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Class features on IVD sets
To activate or turn ON Automatic
Callback after you have dialed a
telephone number:
1. Press the Goodbye Key to disconnect
the call.
/
2. Press your Individual DN Key.
2698
3. Dial the FAC digits for feature
activation.
4. Follow the instructions provided by
the announcement.
5. Press the Goodbye Key again, or
replace the handset to disconnect.
/
6. When your line is idle, and the called
party line is idle, your telephone rings.
7. Answer the call, and you hear normal
ringing.
To deactivate or cancel Automatic
Callback:
1. Press your Individual DN Key.
2698
2. Dial the FAC digits for feature
deactivation.
Automatic Recall (AR)
This feature allows you to enter a FAC that automatically sets up a call to the
DN of the last incoming call on your individual DN.
Note: Availability of this feature depends upon your Meridian SL-100 system
software and network connections. Check with your system administrator for
availability of the feature and the FAC.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Class features on IVD sets
To activate or turn ON Automatic
Recall:
1. Press your Individual DN Key.
2698
2. Dial the FAC digits for feature
activation.
3. An announcement may provide
additional instructions or
announce the number of the last
incoming call, and provide you
with a choice of whether to
continue the recall or abort it.
4. If you continue the recall, the
Automatic Recall feature calls
the last number that called you;
or, if the number is busy, it
continues trying until the line is
idle.
5. When both lines are idle,
Automatic Recall rings your
telephone. Answer the telephone,
and you hear normal ringing.
To deactivate or cancel
Automatic Recall:
1. Press your Individual DN Key.
2698
2. Dial the FAC digits for feature
deactivation.
Customer Originated Trace (COT)
This feature allows you to activate an immediate trace of the last incoming call,
without requiring prior approval and manual intervention by your system
administrator. Customer Originated Trace can be activated on a per-call basis. This
feature can be activated using a feature key or by entering a FAC. This feature can
be used to initiate a trace of an ACD call terminating on your InCalls Key.
Note: Availability of this feature depends upon your Meridian SL-100 system soft-
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Class features on IVD sets
ware and network connections. Check with your system administrator for availabil-
ity of the feature and the FAC.
To activate or turn ON Customer
Originated Trace after receiving a
harassing or prank telephone call:
1. Press the Goodbye Key to disconnect
the call.
/
2. Press your Individual DN Key.
2698
3. Press your CustOrigTr Key or dial
CustOrigTr
the FAC digits for feature activation.
or
4. An announcement tells you if the call
was successfully traced or not.
5. Press the Goodbye Key again to
disconnect. The feature deactivates.
/
6. Contact your system administrator for
follow-up actions.
Calling Name/Number Delivery Blocking (CNNB)
This feature allows you to control the display of your individual DN or your name
and DN for a terminating call on a per-call basis. Instead of your name and/or
telephone number being displayed, the word PRIVATE is displayed on the called
party’s telephone display. Calling Name/Number Delivery Blocking is activated by
dialing a FAC.
Note: Availability of this feature depends upon your Meridian SL-100 system soft-
ware and network connections. Check with your system administrator for availabil-
ity of the feature and the FAC.
To block your name and telephone
number from the display on a
terminating call you want to make:
1. Press your Individual DN Key.
2698
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Class features on IVD sets
2. Dial the FAC digits for feature
activation.
3. Listen for the confirmation tone
or announcement, followed by
dial tone.
4. Place the telephone call.
Selective Call Forward (SCF)
This feature allows you to selectively program a list of up to 31 DNs from
which calls on your Individual DN are to be rejected or blocked. The incoming
calls that are on the list are routed to an announcement or other call treatment.
This feature is accessed by dialing a FAC.
Note: Availability of this feature depends upon your Meridian SL-100 system
software and network connections. Check with your system administrator for
availability of the feature and the FAC.
To activate or turn ON Selective Call
Forward:
1. Press your Individual DN Key.
2698
2. Dial the FAC digits for feature
activation.
Listen to the announcement for instructions
on how to activate, deactivate, change, or
review your Selective Call Forward list of
telephone numbers.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Directory display and navigation
Directory display and navigation
With the M3905’s display, you can view two lines of information. The figure below
shows the status once you log into the directory.
01 Directoriesꢀ
ꢀ
Personal Directoryꢀ
Call Log (Callers List)ꢀ
ꢀ
Selectꢀ
ꢀ
Quit
Copy
553-9092
Access your Callers List, Redial List, or Personal Directory
To access the M3905 Dir/Log:
1. Press the Directory/Log Key.
Dir/Log
Note: When you press the Directory/Log
Key, your Personal Directory is automati-
cally selected. At this point, you can begin
searching the directory using the telephone’s
dial pad. See “Search for an entry” on
page 92.
2. Use the Navigation Keys to highlight
the Personal Directory or the Call Log
that you want to view.
Personal Directory
Call Log (Callers List)
Call Log (Redial List)
3. Press the Select Key.
Select
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Directory display and navigation
To access the M3905 Callers List or
Redial List using a Context Sensitive
Soft Key or a Programmable Feature
Key:
Press the Callers Key to access the
Callers List, or press the Redial Key to
access the Redial List.
ꢀCallers
ꢀꢀRedial
or
To exit the Dir/Log:
Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Dir/Log
Directory password protection
You can password protect your Personal Directory, Callers List, and Redial list on the
M3905. If password protection is activated, you will be asked to enter your password
each time you press the Dir/Log Key.
To enable password protection:
1. Press the Directory/Log Key.
Dir/Log
2. From the Directories menu, use the
Navigation Keys to highlight Password
Administration.
Password Administration
3. Press the Select Key. The Password
Select
Administration menu appears with
Password enabled: O11 highlighted.
Select
4. Press the Select Key again to select
Password enabled: O11.
5. Press the On Key to enable password
On
protection.
6. Dial the password.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Directory display and navigation
7. Press the Enter Key.
Enter
8. Dial the password again to confirm your
password.
9. Press the Enter Key.
Enter
Done
10. Press the Done Key to save changes.
11. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Dir/Log
To disable Personal Directory
password:
1. Press the Directory/Log Key.
Dir/Log
2. Dial the password.
3. Press the Enter Key.
Enter
4. Use the Navigation Keys to highlight
Password Administration.
Password Administration
Select
5. Press the Select Key. The Password
Administration menu appears with
Password enabled: ON highlighted.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Directory display and navigation
6. Press the Select Key again to select
Select
Password enabled: ON.
Off
7. Press the Off Key to disable password
protection.
Done
8. Press the Done Key to save changes.
9. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Dir/Log
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Log
Call Log
The Call Log records the name and number of incoming and outgoing calls and can
be password protected. You can activate Call Log to record all calls, record only the
unanswered calls, or record no incoming calls.
The Callers List stores incoming calls, and the Redial List stores outgoing calls in
order of date and time received/made. The oldest call is stored at the top of the list.
The newest call is stored at the bottom of the list.
The M3905 Call Log list holds up to 100 entries for incoming and 20 entries for
outgoing calls. The M3905 can copy a number from the Callers List or Redial List
and store it in the Personal Directory.
Access and use the Callers List
To access the Callers List using the
Dir/Log Key:
1. Press the Directory/Log Key.
Dir/Log
2. Use the Navigation Keys to highlight
Call Log (Callers List).
Call Log (Callers List)
3. Press the Select Key.
Select
4. Press the New Key to go to the top of the
ꢀꢀꢀꢀNew
ꢀꢀꢀꢀꢀOld
new calls list, or press the Old Key to go
or
to the top of the old calls list.
To access the Callers List using a
Context Sensitive Soft Key or a
Programmable Feature Key:
Press the Callers Key. You are presented
with the first call in the new calls list.
ꢀCallers
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Log
To make a call from the Callers List:
1. Use the Navigation Keys to highlight
the number you want to call.
Note 1: If you are calling an external or long
distance number, you will need to edit the
number to add the access codes required by
your system to make an external or long
distance call.
2498
Note 2: Press the Pause Key to insert a
1.5-second pause in the dialing string.
2. Press the Dial Key to call the number
selected and press your non-ACD line
key. You leave the Callers List when you
make the call.
Dial
To exit the Callers List without
making a call:
Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Dir/Log
Access and use the Redial List
The Redial List records your last 20 outgoing calls and can be password protected. On
the M3905, you can copy these numbers to your Personal Directory.
To access the Redial List using the
Dir/Log Key:
1. Press the Directory/Log Key.
Dir/Log
2. Use the Navigation Keys to highlight
Call Log (Redial List).
Call Log (Redial List)
3. Press Select.
Select
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Log
To access the Redial List using a
Context Sensitive Soft Key or a
Programmable Feature Key:
Press the Redial Key. You are presented
with the most recently dialed number.
ꢀꢀRedial
To make a call from the Redial List:
1. Use the Navigation Keys to highlight
the number you want to call.
Note: If you are calling an external or long
distance number, be sure that the appropriate
access codes are included.
2637
2. Press the Dial Key and press your
non-ACD line key. Your call is
automatically dialed and you exit the
Redial List.
Dial
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Personal Directory
Use the Personal Directory
The Personal Directory provides a personalized directory of names and telephone
numbers. The Personal Directory allows you to add, delete, search, and edit entries
and can be password protected. The Personal Directory holds up to 100 entries (an
entry is one name and one telephone number). You can add a directory entry by
copying the entry from your Callers List or Redial List. You can also add entries with
the “AddNew” Key or by using the Personal Directory PC Utility application. The
Personal Directory PC Utility uses an accessory cartridge to connect your PC and
your M3905 telephone. You can create a directory on your Personal Computer and
transfer it to your M3905 Call Center telephone.
Access the Personal Directory
1. Press the Directory/Log Key.
Dir/Log
Select
menu to select Personal Directory.
Note: When you press the Directory/Log
Key, your Personal Directory is automati-
cally selected. At this point, you may begin
searching the directory using the telephone’s
dial pad. See “Search for an entry” on
page 92.
Add a Personal Directory entry
After accessing your Personal
Directory:
1. Press the AddNew Key.
AddNew
2. Dial the new name.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Personal Directory
Example:
To enter the name and telephone
number for Chris:
1. Dial the name using the key pad.
Note: Press the Up Navigation Key to
access special characters you may want to
include in the name. Use the Navigation
Keys to locate the character you want to
include. Press the Select Key to choose the
highlighted character. Press the Return Key
to return to name entry without selecting a
special character.
ÛÛÛ
ÝÝ
ààà
ÝÝÝ
àààà
2. Press the dial pad Key with the desired
letter repeatedly until that letter appears
on the display.
3. Press the right arrow Key to go to the
next letter.
Note: The cursor automatically advances to
the next position, if a different-from-last key
is pressed, or after a short pause.
4. Press the Next Key.
Next
5. Use the dial pad to enter the telephone
number associated with the name
entered above.
Note 1: If you are adding an external or long
distance number, be sure to include the access
codes required by your system to make an
external or long distance call.
Note 2: Press the Pause Key to insert a
1.5-second pause in the dialing string.
6. When you have finished entering all of
the digits, press the Done Key to save
the changes.
Done
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Personal Directory
7. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Dir/Log
Add an incoming call
1. Press the Copy Key.
Copy
/
The displays shows the message
Copy to.
2. Press the Directory/Log Key.
Dir/Log
3. Press Next to copy the incoming call
without editing the name. Edit the
number, if required (see note for step 4)
and go to step 5.
Next
or
or
Clear
Press Delete to make changes to the
name before saving. Edit the name using
the dial pad, Delete, and Case Keys as
needed.
4. Press the Next Key. Make changes to the
Next
telephone number if required
Note 1: If you are copying an external or
long distance number, be sure to add the
access codes required by your system to
make an external or long distance call.
Note 2: Press the Pause Key to insert a
1.5-second pause in the dialing string.
5. Press the Done Key to save the entry in
Done
your directory.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Personal Directory
6. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Note: You can edit the name or number
Dir/Log
before or after you save to the directory.
Add an outgoing call
1. After the person you called answers,
Copy
/
press the Copy Key.
The displays shows Copy to.
2. Press the Directory/Log Key.
Dir/Log
3. Add the name, using the dial pad,
Delete, and Case Keys as needed.
4. Press the Next Key.
Next
Done
5. Press the Done Key to save the changes.
6. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Note: You can edit the name or number
Dir/Log
before or after you save to the Directory.
Delete or edit a Personal Directory entry
To delete a Personal Directory entry:
1. Use the Navigation Keys to highlight
the entry you want to edit or delete.
2. Press the Delete Key to delete the
currently highlighted entry in your
Personal Directory.
Delete
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Personal Directory
3. Press the Yes Key to confirm the
Yes
deletion.
To edit a Personal Directory entry:
1. Press the Edit Key to change the
Edit
telephone number or name.
2. Use the Navigation Keys to highlight
the character you want to change.
3. Use the dial pad to enter the desired
changes. Refer to“Add a Personal
Directory entry” on page 86 for an
example of how to use the dial pad to
enter names.
4. Press the Next Key. Edit the number if
Next
Done
Quit
necessary.
5. Press the Done Key to save the changes.
6. Press the Quit Key or the
Directory/Log Key to exit.
or
Dir/Log
Delete your Personal Directory
To delete your Personal Directory:
DelList
1. Press the Delete List Key.
The display shows Delete all
entries?.
2. Press the Yes Key if you want to delete
all the entries in your Personal
ꢀꢀꢀꢀYes
ꢀꢀꢀꢀꢀNo
or
Directory, or press the No Key if you
want to return to the top of the Personal
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Personal Directory
Directory with no changes made.
3. Press the Quit Key or the
Quit
Directory/Log Key to exit.
or
Dir/Log
Use the Personal Directory to make a call
To use the Personal Directory to
make a call:
1. Use the Navigation Keys to highlight
the desired name or number.
Note: If you are dialing an external or long
distance number, be sure that your directory
entry includes the access codes required by
your system to make an external or long dis-
tance call.
Purchasing
2. Press the Dial Key and press your
Dial
non-ACD line key.
Use Card View
The Card View feature provides additional information about the Personal Directory
entry.
To look at the Card View:
1. Use the Navigation Keys to highlight
the desired name.
Purchasing
2. Press the right Navigation Key.
To dial from the Card View:
1. Use the Navigation Keys to show the
name and number of the currently
selected entry in the Card View.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Personal Directory
Note: If you are dialing an external or long
distance number, be sure that your directory
entry includes the access codes required by
your system to make an external or long dis-
tance call.
2. Press the Dial Key and press your
Dial
non-ACD line key to place the call.
To exit the Card View:
Press the left Navigation Key to leave
the Card View and return to the selected
name.
Search for an entry
You can search for a particular entry in your Personal Directory.
To search for an entry:
1. Use the Navigation Keys to highlight
Personal Directory.
Personal Directory
Select
2. Press the Select Key or proceed directly
to step 3.
3. Use the dial pad to enter the first letter
of the name your are seeking. For
example, press the Û key twice to go to
the first entry that begins with the letter
“B”.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Personal Directory
Copy a number from the Redial List
You can copy a number from the Redial List to the Personal Directory.
To copy a number from the Redial
List:
1. Use the Navigation Keys to highlight
the name or number in your Redial List
that you want to copy to your Personal
Directory.
2498
2. Press the Copy Key.
Copy
/
Dir/Log
The displays shows Copy to.
3. Press the Directory/Log Key.
4. Press Next to copy the incoming call
without editing the name. Edit the
number, if required (see note for step 5),
and go to step 6.
Next
or
or
Clear
Press Clear to make changes to the
name before saving. Edit the name using
the dial pad, Delete, and Case Keys as
needed.
5. Press the Next Key. Make changes to the
Next
telephone number, if required.
Note: If you are copying an external or long
distance number, be sure that your directory
entry includes the access codes required by
your system to make an external or long dis-
tance call.
6. Press the Done Key. The entry is saved
to your Personal Directory and you are
returned to the Redial List.
Done
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Corporate Directory
Corporate Directory
The Corporate Directory application allows you to search by entering the characters
in the name of the person you are calling, beginning with the last name. Once you
have located the name and number of the person, you may use the dial soft key to call
the number. You may copy an entry from the Corporate Directory and paste it into
your telephone’s Personal Directory for quick access.
To use the Corporate Directory
application:
1. Press the Applications Key.
Apps
Note: If, when you press the Applications
Key, Corporate Directory is highlighted, pro-
ceed to step 4.
2. From the Applications menu, use the
Navigation Keys to highlight
Corporate Directory.
Corporate Directory
3. Press the Select Key or proceed to step
Select
4.
The Corporate Directory Find screen
appears.
4. Use the dial pad to enter the name of the
person you want to call. Enter the last
name first. Separate the last name and
first name with a comma.
Note 1: The comma is the first character on
the ÚꢀKey on your dial pad.
Note 2: You do not need to enter the entire
application will highlight the first directory
entry that matches the text that you entered.
5. Press the Done Key.
Done
The application highlights the first entry
that matches the text you entered in
step 4. If there is no match, the screen
displays No matches found for . . .
(the text that you entered).
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Corporate Directory
6. Use the Navigation Keys to scroll
through the directory.
Note: The entire directory is available. The
“find” process determines which directory
entry to select as your starting point.
7. If desired, use the Right Navigation
Key to move from “list” view to “card”
view. In card view, the telephone and
department numbers for the entry are
viewable. Use the Left Navigation Key
to return to list view.
Note: While you are in card view, you can
use the Up or Down Navigation Key to
scroll through directory entries.
8. Press the Dial Key and press your
non-ACD line key to call the person
whose name is highlighted.
Dial
Note: The Dial Key will attempt to dial out
on your primary directory number. Since
your primary DN Key is your InCalls Key,
you cannot dial out on it. On the Meridian
SL-100, after you press the Dial Key, press a
secondary non-ACD line Key to dial the
number.
To find another directory listing or to
refine your current directory search:
Press the NewFind Key to begin a new
search, or press the Resume Key to
enter additional characters so that you
may narrow your search.
New1ind
Resume
or
To exit the Corporate Directory
application:
Press the Quit Key or the Applications
Quit
Key.
or
Apps
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Corporate Directory
To copy an entry from the Corporate
Directory to your telephone’s
Personal Directory:
1. With the entry selected in the Corporate
Copy
/
Directory, press the Copy Key.
2. In the Copy to screen, press the Dirctry
(Directory) Key to copy the name and
telephone number to your Personal
Directory.
Dirctry
After you complete editing and entering
the name and telephone number, you are
returned to the Corporate Directory.
3. Press the Next Key. Make changes to the
directory if needed.
4. Press the Done Key. The entry is copied
to your Personal Directory.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories for the M3905
Accessories for the M3905
Optional items are available for use with your M3905 Meridian Digital telephone.
Please contact your system administrator for further details.
Additional key caps
There is a Key Cap Kit you can order that has additional labeled key caps. You can
configure four of the bottom six keys to fit your specialized business needs. These
keys include: Agent, Activity Key, Answer Emergency, Observe Agent, and Dsply
Queue.
Accessory Connection Module (ACM)
The Accessory Connection Module provides the interface for adding the Analog
Terminal Adapter, External Alerter and Recorder Interface, and Personnel Directory
PC Utility.
Personal Directory PC Utility
The Personal Directory PC Utility provides a faster, easier way to create or modify the
Personal Directory on the M3905. You can enter names and numbers into a directory
file on your PC, and download the file directly from the PC to the M3905 through a
serial port connection. You can also upload the Personal Directory from the M3905 to
your PC so that you can modify the directory. The PC and the M3905 are connected
using the Personal Directory PC Utility Cartridge.
Headset
The amplified or unamplified headsets are compatible with the M3905 Call Center
Telephone. The amplified headset is an option for noisy environments.
Headsets vary in electrical, physical and audio characteristics. Performance
perception is subjective so it is recommended that the headset user try using their
headset with each of the three settings. Test the headset settings on both internal and
external calls to determine which works best for you.
To adjust the headset volume, go to the Options menu, Headset types, and select one
of the headset types from the sub-menu item: Headset 1, Headset 2, or Amplified.
Refer to your distributor for the latest product bulletin from Nortel Networks
recommending headset types for use with the M3905 Call Center Telephone.
Handset
The Handset does not accompany the M3905 Call Center Telephone. The Handset kit
is a hardware option for the M3905 Call Center Telephone.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories for the M3905
Analog Terminal Adapter (ATA)
The ATA allows you to connect an analog device such as a modem or FAX machine to
your telephone.
External Alerter and Recorder Interface
The External Alerter Interface lets you connect a third-party device (remote ringer,
indicator light, or recording device) to your telephone. The M3905 Call Center
Telephone uses the External Alerter and Recorder Interface accessory cartridge.
Key-based Access Expansion Module (KBA)
The Key-based Expansion Module provides additional DN or feature keys for the
M3905. You can add up to two 22-button Key-based Expansion Modules to your
M3905 telephone.
Display-based Access Expansion Module (DBA)
The Display-based Access Expansion Module provides additional line (DN) or
feature keys for the M3905 telephone. The DBA has eight keys on three layers for a
total of 24 additional DN or feature keys. The three layers are accessed through the
use of a Page key. The M3905 supports one DBA module.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Key chart
Feature Key chart
The following chart indicates which type of feature key can be used for features, or
whether features can be accessed with a Feature Access Code (FAC).
Feature Name
Context
Sensitive
Soft Key
Programmable
Key
Feature Fixed
Access
Code
Key
Activity Code (LOB)
NO
NO
YES
YES
NO
YES
NO
Agent (Assigned to
Agent)
YES
Agent (Call)
NO
NO
YES
NO
NO
YES
NO
Anonymous Caller
Rejection (ACRJ)
YES
Answer Agent
Answer Emergency
Applications
NO
NO
NO
NO
NO
YES
YES
YES
YES
NO
NO
NO
NO
NO
YES
YES
YES
NO
Auto Dial
NO
Automatic Callback
(ACB)
NO
Automatic Recall (AR)
Blind Transfer Recall
Busy Override
NO
YES
NO
NO
NO
YES
NO
NO
NO
YES
NO
NO
NO
NO
NO
NO
NO
YES
NO
Call Forcing
NO
Call Forward
YES
NO
NO
Call Forward – Remote
NO
Activated
Call Join
YES
NO
NO
NO
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Key chart
Feature Name
Context
Sensitive
Soft Key
Programmable
Key
Feature Fixed
Access
Code
Key
Call Page
NO
NO
NO
NO
NO
NO
YES
YES
NO
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
Call Park
YES
YES
NO
Call Pickup
Call Pickup, Directed
Call Transfer
Call Waiting
Callers
NO
YES
NO
YES
NO
NO
YES
NO
NO
Calling Name/Number
Delivery Blocking
(CNNB)
YES
Charge a Call (Account
Code)
NO
NO
YES
NO
Conference 6-party
Controlled Interflow
YES
NO
NO
NO
NO
NO
NO
YES
YES
NO
Customer Originated
Trace (COT)
NO
YES
Direct Call Park
Display Agent
Display Queue
Emergency
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
NO
YES
NO
NO
NO
NO
YES
NO
NO
NO
NO
YES
YES
NO
Forced Agent
Forward an Internal Call NO
NO
Group Intercom Call
Incalls
NO
NO
YES
NO
NO
YES
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Key chart
Feature Fixed
Feature Name
Context
Sensitive
Soft Key
Programmable
Key
Access
Code
Key
Inspect
NO
NO
NO
NO
YES
NO
YES
NO
NO
YES
NO
YES
NO
NO
NO
NO
Last Number Redial
Make Set Busy
NO
YES
YES
YES
YES
YES
YES
NO
Malicious Call Hold
Message Waiting
Message Waiting Light
NO
YES
YES
Multistage Queue Status NO
Key/Lamp (MSQS)
Night Service
Not Ready
NO
NO
NO
NO
NO
NO
YES
YES
YES
NO
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
YES
NO
YES
YES
NO
NO
NO
NO
NO
NO
NO
Observe Agent
Options Feature List
Personal Directory
Preset Conference
Privacy Release
Redial
NO
YES
NO
Ring Again
Selective Call Forward
(SCF)
NO
Speed Call Controller
Speed Call User
Station Camp-On
Supervisor
YES
YES
NO
YES
YES
NO
YES
YES
NO
NO
NO
NO
YES
NO
YES
NO
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Key chart
Feature Name
Context
Sensitive
Soft Key
Programmable
Key
Feature Fixed
Access
Code
Key
Supervisor Observe
NO
NO
NO
YES
NO
System Speed Call
Controller
YES
YES
YES
System Speed Call User
Walkaway
YES
NO
YES
NO
YES
NO
NO
NO
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Meridian SL-100 Feature Access Codes (FAC)
Meridian SL-100 Feature Access Codes (FAC)
Note: Contact your system administrator to obtain the FAC codes for each feature that
is available on your system.
Anonymous Caller Rejection
(ACRJ)
Direct Call Park (DCPK)
Automatic Call Back (ACB)
Automatic Recall (AR)
Busy Override
Directed Call Pick-up (DCPU)
Last Number Redial
Malicious Call Hold (MCH)
Paging Access Code
Call Forward Busy/Don’t
Answer – Internal/External
Call Page
Selective Call Forward (SCF)
Speed Call Controller
Calling Name/Number Deliver
Blocking (CNNB)
Charge a Call
Speed Call User
Customer Originated Trace
(COT)
Station Specific AuthCode (SSAC)
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
Access the Personal Directory 86
Accessories 97
Accessory Connection Module 97
ACD Features 11
Activity Code Key 19, 35
Agent Key 18, 44
Call Log 83
Agent Login 33
Agent Login Enhancement 33
Agent Logout 34
Agent Return 42
Agent Walkaway 42
Agent/Supervisor Features 11
Analog Terminal Adapter 98
Announcement over Call Page 72
Anonymous Caller Rejection 74
Answer a Call 57
Call Waiting 68
Calling Name/Number Delivery Blocking
Answer Agent Key 19, 44
Answer Call Center Calls 35
Answer Emergency 19, 45
Answer Supervisor 41
Application Keys 16, 20
Applications
Charge a call or Charge a Forced call 61
Charge a Forced Call 65
Contact your Supervisor 41
Context Sensitive Soft Keys 10, 16
Copy from Redial List 93
Corporate Directory 94
Customer Originated Trace 76
Corporate Directory 94
Auto Dial 51
Auto Dial Key 15
Automatic Callback 74
Automatic Recall 75
B
Blind Transfer Recall 62
Busy Override 72
D
Date/Time Format 13
DBA Expansion Module 98
Dialing
C
Call Agent 45
Predial 51
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Directory
Password protection 80
Directory Number 13
Directory/Log Key 80, 86
Display Agent Status 48
display diagnostics 31
Display Feature 13
H
Headset port on call 30
Headset type, setting 30
Hold Call 61
Display Queue 37, 44
Display Queue Status 49
Display Queue Threshold 37
Display Queue Threshold feature 37
Display-Telephone 22
DN 13
I
Don’t Answer Split 59
Done Key 23
Indicator Status 13
E
Individual Page from Group Intercom 57
Information Display 13
Emergency
Supervisor 45
Emergency Key - Agent 19, 39
Enable Live Dial Pad 28
End ACD Call 36
Intercom Call 55, 56
External Alerter and Recorder Interface
98
F
KBA Expansion Module 98
Key Caps 10, 97
Feature Access Codes (FAC) 13, 103
Feature Display 13
Feature Key
Key-based Expansion Module 98
Change label 24
Keys
Feature Key Chart 99
Fixed Key Caps 10
Fixed Keys 13, 17
Directory/Log Key 80, 86
Done Key 23
Feature Key 24
Navigation Keys 23
Options Key 23
G
Goodbye Key 16, 36
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Programmable Line (DN)/
Feature Key 24
Quit Key 23
Select Key 23
L
Paging Tone 14
Language selection 24
Last Number Redial 52
LCD Indicator 15
Line (DN) Key 15
Live dial pad 28
Login 33
Password
Logout 34
M
M3905 Call Center Features 10
Make a call 50
Personal Directory PC Utility 97
Predesignated Set 56
Make Busy Key 19, 39
Malicious Call Trace 66
Message Key 21
Program Key 15
Message Waiting Lamp 17
Meridian SL-100 FAC 103
Multistage Queue 36
Mute Key 17
Programmable Line (DN)/Feature
Programmable Line/Feature
Keys (self-labeled) 15
N
Navigation Keys 23
Network Speed Call 54
Night Service 46
Non-ACD Calls 41
Not Ready Key 19, 43
Q
Quit Key 20, 23
O
R
Observe Agent Key 20, 47
Off-hook 13
Redial Last Number Called 52
Redial List 83, 84, 93
Optional Key Caps 10
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Access 79
Return from Walkaway 43
Ring Again 52
Ring type 27
Ringback/ring tone 14
S
Screen contrast 26
V
Select Key 23
Selective Call Forward 78
Shared Directory Numbers 14
Special characters, entering 25, 87
Special Dial Tone 14
Speed Call, System 54
Station Camp-on 73
W
Waiting Calls Key 20
Walkaway 42
Supervisor Headset Jack 45
Supervisor Key 18, 41
Supervisor Observe Key 20, 45
System Speed Call 54
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Title to and ownership of Meridian SL-1 software shall at all times
remain with Nortel Networks. Meridian SL-1 software shall not be
sold outright and the use thereof by the customer shall be subject
to the parties entering into software agreements as specified
by Nortel Networks.
Information contained in this document is subject to change.
Nortel Networks reserves the right, without notice, to make
changes in equipment design or program components as progress
in engineering, manufacturing or technology may warrant.
Reordering number: NT2F80TA A0863879
(c/o 5 each per package P0911883)
Internal Manufacturing part number:
P0943524
Issue 1.00
Printed in Canada
February 2002
www.nortelnetworks.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|