DECT 4025
Nortel DECT Handset 4025
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Revision history
Revision history
February 2005
Standard 1.00. This document is issued to support Nortel
Communication Server 1000 Release 4.0.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Revision history
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
Important safety information
Read the following information before using the Nortel DECT Handset
4025.
CAUTION
Like all cordless telephones, this handset
uses radio signals, which do not
guarantee a connection setup under all
circumstances. Generally, you should not
rely exclusively on cordless telephones
when making indispensable calls (such as
medical emergencies).
The CE symbol on the product certifies its conformity with the technical
guidelines concerning user safety and electromagnetic compatibility valid
at the time of approval in accordance with European directive No.
91\263\EEC.
This product complies with IP50, according to IEC 529/EN60 529. Use
only in countries where authorized.
Sensitive electronic equipment
Any radio-based equipment can potentially cause interference with other
equipment and can receive interference from other equipment. This
potential also applies for DECT equipment. However, due to the very low
transmission power used by DECT equipment, the risk of interference is
very small.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
Safety precautions
Observe the following
WARNING
Do not open the handset or charger. Doing so could
expose you to high voltages. Have all repairs carried out
by authorized service personnel.
CAUTION
•
Do not allow the handset and charger to come into
contact with water or chemicals.
•
Do not allow the charger and the battery contacts to
come into contact with conductive objects such as
keys, paper clips, rings, or bracelets.
•
This product contains magnetic material. Be aware
that small metallic objects may stick (for example) to
the loudspeaker. This may deteriorate the audio
quality and can be harmful.
WARNING
Do not use the handset in a vehicle or hazardous
location.
CAUTION
•
•
•
Use only the plug-in AC adapter and battery type
supplied.
Ensure the adapter voltage is the same as the
electrical outlet voltage.
Do not use AC adapters that are visibly damaged
(cracked or broken housing), and keep the ventilation
slits on the AC adapters free of obstruction.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
About the handset
About the handset
The DECT Handset 4025 brings a high level of functionality to in-building
mobile workers.
Basic features
The handset supports the following features:
•
•
•
•
•
LED backlit display
volume control
loudspeaker for hands free calling
soft keys (self-labeled) providing access to handset features
two specialized fixed keys:
— R (Recall) key
— Info key
•
three call processing fixed keys:
— C (Cancel) key
— Handsfree key
— Hook key
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the handset
Setting up the handset
Before you use the handset, it is important that you read the safety
information and perform the following steps:
1. Install the charger.
2. Install the batteries.
3. Charge the batteries.
4. Subscribe the handset to the DECT system.
Installing the charger
Place the charger on a flat, even surface. To operate the charger, a mains
connection is required. Ensure that the mains voltage matches the
adapter mains voltage. Connect the charger to the mains connection.
1. Connect the cable on the plug-in AC adapter to the terminal on the
bottom of the charger.
2. Plug the AC adapter into the mains socket outlet.
CAUTION
Do not install the charger, handset, and accessories
near:
•
•
•
water, moisture, or dampness
sources of heat and direct sunlight
devices that generate strong magnetic fields,
electrical appliances, fluorescent lamps, computers,
radios, televisions, or fax and telephone terminals
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the handset
CAUTION
Do not install the charger, handset, and accessories in:
•
areas where the handset can be covered, or in
locations with poor ventilation
•
areas where there is excessive dust and areas
subject to vibration, shock, or extreme temperature
fluctuations
CAUTION
Keep the charger, handset, and accessories out of
reach of small children.
Your handset is operational only after the batteries have been charged.
You can then use the handset to make and receive calls.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the handset
Installing the batteries
The battery compartment is on the back of the handset. It takes the three
type AAA batteries that are supplied. Please refer to “Important battery
Figure 1 illustrates how to insert batteries in the DECT Handset 4025.
Figure 1: Inserting the batteries
1
2
3
1. Insert a small item, such as the top of a ballpoint pen, into the hole at
the bottom of the compartment cover. Push in and lift the cover at the
same time, as shown in Figure 1.
2. Insert the batteries in the battery compartment, taking care to observe
the correct polarity. Make sure that the + - poles of the batteries
correspond to the + - markings in the battery compartment.
3. Replace the cover by placing it on the compartment at a slight angle
and pressing it down until it clicks into place.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the handset
Important battery information
Heat or cold reduces the performance and service life of the batteries. It is
possible that a handset with hot or cold batteries can be temporarily out of
operation even if the batteries are fully charged.
WARNING
Do not dispose of the batteries in a fire. Recycle or
dispose of batteries in accordance with local
regulations.
WARNING
Do not replace the batteries in potentially explosive
environments, such as rooms where flammable liquids
or gases are present.
CAUTION
Do not charge the batteries unless you use the supplied
charger and the proper batteries.
Charging the batteries
Place the handset in the charger.
CAUTION
Use only rechargeable AAA NiMh batteries of typical 800
mAh, 1.2 V.
CAUTION
The batteries can become hot during the first charge
cycle.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the handset
CAUTION
Avoid placing the handset in the charger when fully-
charged batteries have been removed from the handset
and inserted again. They can become overcharged.
Charging guidelines
•
Charge the batteries for at least six to seven hours before using the
handset for the first time. This protective measure extends the service
life of the batteries.
•
•
•
The maximum power output is attained only after three to five
charging and discharging cycles.
Do not leave the handset connected to the charger longer than one
month without using.
The batteries can be charged and discharged hundreds of times, but
eventually they will be worn out. If the operating time (that is, talk and
standby time) is significantly shorter than usual, it is time to replace
the batteries.
•
•
To maintain optimum operating time, the batteries should be
discharged from time to time by not placing the handset in the
charger but leaving it switched on until it switches itself off. Use only
this method to discharge the batteries.
Extreme temperatures influence the charging capability of the
batteries.
Operating times
•
Empty batteries require six to seven hours to fully charge.
•
When a fully-charged handset is switched off, it discharges in
approximately one week.
•
When batteries are fully charged, the handset has approximately 20
hours of talk time or approximately 200 hours of standby time.
Charge display
The handset display screen shows the battery charge status. When the
battery capacity is almost exhausted, an alert tone sounds in the form of
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the handset
three short “beep” signals (only during a call). This indicates that
approximately five minutes of talk time remains.
See Figure 2 for battery charge status definitions.
Figure 2: Battery charge status
Fully charged - 75 to 100%
Partially charged - 50 to 74%
Partially charged - 25 to 49%
Partially charged- 0 to 24%
Batteries are empty.
An alert tone sounds and the icon (frame) flashes.
Note: When new batteries are inserted, a charge status icon does not
display until a complete charge cycle has occurred. However, when
partially charged batteries are inserted, then the charge status icon
displays immediately.
Subscribing the handset to a DECT system
The handset must be subscribed to at least one DECT system before it
can be used.
Before you subscribe to a DECT system, acquire the following information
from your system administrator:
•
•
•
•
PABX-PIN — this code is used to access the DECT system
DECT system name
local phone number assigned to your DECT handset
PARK-Code (a PARK-Code system ID that should be used only if
more than one DECT system overlaps in your location)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the handset
In order to carry out the following steps, you need to be familiar with the
1. Press the Menu soft key.
Menu
2. Press the arrow keys to scroll and highlight the
u
System option.
System
3. Press the OK soft key.
OK
4. Press the arrow keys to scroll and highlight the
u
Subscription option.
Subscription
5. Press the OK soft key.
OK
6. Press the arrow keys to scroll and highlight the
u
Subscribe HS option.
Subscribe HS
7. Press the OK soft key.
OK
8. Use the keypad to enter the authentication code
at the PABX PIN prompt and press the OK soft
key.
d
PABX-PIN
Note: The PABX PIN is required to access the
DECT system.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the handset
9. Choose one of the following three options:
— press the arrow keys to scroll and highlight
u
the Cancel option.
Cancel
— if you are at a location where there is only
one DECT system, press the arrow keys to
scroll and highlight the Subscribe option.
u
Subscribe
— if you are at a location where two DECT
systems overlap, press the arrow keys to
scroll and highlight the Use PARK-Code
option, and use the keypad to enter a
system ID.
u
Use Park-Code
d
Note 1: A system ID should only be entered if
you are at a location where two DECT systems
overlap.
Note 2: The handset can be operated with a
maximum of five DECT systems.
10. Press the OK soft key.
OK
11. Use the keypad to enter the System Name at
the Enter name prompt and press the OK soft
key.
d
OK
12. Use the keypad to enter the phone number
assigned to your handset at the Internal No.
prompt and press the OK soft key.
d
OK
You can now use the handset to make and receive calls.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset controls
Handset controls
This section will help you become familiar with the following:
•
•
•
•
•
•
See Figure 3 for an illustration of the handset layout.
Figure 3: DECT Handset 4025
Use the C (Cancel) key to:
•
•
•
power On/Off
delete characters or entire entries
edit characters
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset controls
Use the R (Recall) key to:
•
•
•
•
•
place an Emergency/SOS call
place a call on hold
retrieve a call on hold
transfer a call
set up a conference call
Use the Hook key to:
•
•
•
make a call
answer a call
end a call
Use the Info key to:
•
•
access the Caller List
access Voice Mail
Press the Speaker key to activate handsfree.
Use the soft keys to control handset functions and
features.
Press the arrow (up/down) keys to select menu items
and to access the Telephone Book.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset controls
Switching the handset on/off
•
•
Switch the handset ON by pressing C for
more than one second, or place the handset
in the charger.
e
Switch the handset OFF by pressing C for
more than one second when it is in an idle
state.
Keys and display
The handset has three major display areas:
— Icon/text line
— Text line
x
[
544
r
Menu
b
— soft key line
Icon/text line
The function of this line changes as follows:
•
•
•
During a telephone call or while in idle mode, the Icon/text line
displays the current status of the handset.
When using the menus, the Icon/text line displays the name of the
active menu.
When the handset is in an idle state, this line is replaced with an icon
line, which displays various handset status symbols as shown in
Table 1 on page 23.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset controls
Table 1: Symbols indicating handset status
Symbol
Status
Ringer deactivated
n
At least 2 bars: Good radio link
On: Handset has a connection
x
g
=
V
Flashing: Handset has an incoming call
On: Handsfree is activated
Flashing: Voice message waiting indication
Steady: Microphone is muted
Charge status of the batteries
Steady: Keypad is locked
k
[
q
Text line
The middle line of the display provides information which varies with the
current state of the handset.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset controls
Soft key line
Soft keys are located below the handset display screen.The functions
allocated to the keys are shown on the bottom line of the display, as
to the operation state of the handset.
Figure 4: Soft key line
Icon/text line
Text line
x
[
544
r
Soft key line
Menu
b
Use the Menu soft key to access the Menu list.
Menu
Use the Telephone Book soft key to access the
Telephone Book.
b
Use the Redial soft key to access the Redial List.
r
OK soft key
Use the OK soft key to confirm the selected function. The OK soft key is
used to switch between two options in a function. In the display area, only
active settings are indicated by a check mark (o).
Options soft key
Use the Options soft key to perform actions on the selected item in the
current menu.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset controls
Esc soft key
Use the Esc soft key to quit the current menu selection. The selection of
the previous menu branch or the current idle/connection display is shown.
Press the Esc soft key for approximately two seconds to quit the present
menu and return to the idle display.
Arrow soft keys
Symbols displayed above the arrow keys (up and down keys) identify the
respective functionality of the arrow keys.
If continuous text is displayed (such as a message),
the text can be scrolled up/down using the arrow
keys.
s
When a selection list (such as Telephone Book of
Menu) is displayed, the arrow keys move the cursor
to the desired entry.
a
When entering telephone numbers and names,
move the cursor keys left or right using the arrow
keys.
c
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Handset controls
Handset illumination
The display is automatically illuminated when there is an incoming call or
a key is pressed. The display illumination automatically switches off after
ten seconds if no key is pressed.
Key Lock
Use the Key Lock feature to disable key input and prevent any accidental
operation.
Turning on Key Lock:
1. Press the Menu soft key.
Menu
2. Press the # key.
#
Turning off Key Lock:
1. Press the OFF soft key.
OFF
2. Press the # key.
#
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling features
Calling features
This section explains:
•
•
•
•
•
Making a call
Choose one of these options to make a call:
Dialing
1. Press the Hook key.
h
2. Use the keypad to enter the phone number.
d
Using the Pre-Dial option
1. Use the keypad to enter the phone number.
d
2. Press the Hook key.
h
Note: Long press the # key to insert P (for pause) when entering a
number in pre-dial mode.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling features
Using Quick Call
Use the Quick Call feature to place calls by dialing a one-digit code.
Press the number key assigned to the phone
number and hold it down for a second or two while
the handset is idle.
d
Using Handsfree
To enable several people in a room to listen to a call, the handset
includes a Handsfree feature.
1. Press the Speaker key to activate
f
Handsfree.
2. Use the keypad to enter the phone number.
d
3. Press the Speaker key to end the call.
f
Note: When the Handsfree function is active, the hook icon is
replaced by the loudspeaker icon – =.
For best results:
•
Place the handset upright on a smooth, flat surface, leaving the
loudspeaker and microphone free of obstruction.
•
Keep approximately 0.5 metres away from the handset when
speaking.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling features
Making an SOS call
This handset can be used to make emergency calls to a specific
telephone number.
Press and hold the R key for more than two
seconds to dial the SOS number.
p
To store an SOS number, see “Setting the Emergency Call SOS number”
Answering a call
When the ringer sounds and the call alert w symbol flashes, there is an
incoming call.
•
•
Press the Hook key to answer the call.
h
Note: If Charger Answer is enabled, and the
handset is in the charger, answer a call by
lifting the handset off the charger.
Press the Reject soft key to reject the
incoming call.
Reject
Muting the ringer
•
Press the Silence soft key to mute the ringer
alert signal during a call alert.
Silence
Changing settings during a call
During a call, you can adjust the earpiece/speaker volume and mute the
handset.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling features
Adjusting the earpiece/speaker volume
During a call, you can change the volume of the
earpiece or speaker with the arrow keys. When
the minimum or maximum volume is reached, a
beep sounds. A bar in the display increases or
decreases to indicate the actual volume setting.
Muting the handset during a call
•
Press the Mute soft key to deactivate the
microphone of your handset.
Mute
•
Press the Unmute soft key to activate the
microphone again.
Unmute
Transferring a call
Use this option to consult another caller during a connection (enquiry
call).
1. Press the R (Recall) key to hold the first call.
p
2. Use the keypad to dial the phone number of
d
the party to whom you are transferring the
call.
3. Press the R key to switch back to the first
p
caller.
Note: You can use the R key to speak to the
two callers in an alternating fashion.
4. Press the Hook key to transfer the call.
h
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Voice Mail
Using Voice Mail
Use the Voice Mail feature to listen to voice messages left by calling
parties. New voice messages are indicated by:
•
•
The V (Voice Mail) symbol flashes on the display screen (the symbol
disappears after the voice message is played).
Voice Message is displayed on the display screen.
Note: When the handset is switched OFF, or is out of the coverage
zone, the Info and Loudspeaker keys flash and the V (Voice Mail)
symbol appears when the handset is turned ON, or re-enters the
coverage zone.
For automated access to your voice messages, Nortel recommends you
preconfigure the following:
•
•
•
Voice Mail access number
voice box number
voice box password
Preconfiguring Voice Mail
Use this option to preconfigure the handset to automatically dial the Voice
Mail access number, and automatically enter your voice box number and
password.
1. Access the Telephone Options menu as
2. Press the arrow keys to scroll and highlight the
u
Voice Box
Voice Box option.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Voice Mail
3. Press the OK soft key.
OK
4. Use the keypad to enter the following:
a. Voice Mail access number
d
b. P (long pause) — hold down “#” key for
longer than 2 seconds
c. voice box number
d.
#
e. voice box password (optional) followed by
#
5. Press the OK soft key.
OK
Accessing Voice Mail
Use this option to automatically access voice mail messages using a
preconfigured Voice Mail access number, voice box number, and
password.
1. Access the Telephone Options menu as
2. Press the arrow keys to scroll and highlight the
u
Voice Box
Voice Box option.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Voice Mail
3. Choose one of the following:
— Press the OK soft key.
— Press the Hook key.
OK
h
The Voice Mail access number is automatically
dialed, and your voice box number and password
are automatically entered.
Note: Press the Esc key at any time to abort
this procedure.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Telephone Book
Using the Telephone Book
Use the Telephone Book menu for the following:
•
•
•
•
•
The Telephone Book allows you to store a maximum of 50 phone
numbers and names, which can be searched alphabetically. The
following restrictions apply:
•
•
Each entry must have a unique name.
A telephone number can be stored more than once if a different name
is used each time.
•
Each entry can have a maximum of 16 characters in the name, and a
maximum of 32 digits in the telephone number. However, when
viewing an entry, only 14 characters of the name are visible.
•
•
A dashed line indicates the beginning and end of the Telephone Book
list.
If a call is received from a caller whose number is in the Telephone
Book, then the caller’s name appears on the display.
Keypad layout
Use the keypad to:
•
•
•
enter a telephone number
add or edit Telephone Book entries
create or edit text messages
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Telephone Book
To enter a character, press a key from 0 to 9. For example, press the 4
key twice to enter the character H. Press * to toggle between upper-
Table 2: Handset keypad reference
Keypad
Alphabet equivalent
1
2
3
4
5
6
7
8
9
0
*
? ! 1 - + * / = ( ) % ¿ i
A B C 2 Ä Å À Á Æ Ç
D E F 3 Ë È É Ê
G H I 4 Ï Ì Í Î
? ! 1 - + * / = ( ) % ¿ i
a b c 2 ä å à á æ ç
d e f 3 ë è é ê
g h i 4 ï ì í î
J K L 5
j k l 5
M N O 6 Ö Ò Ó Ô Õ Ø
P Q R S 7 ß
m n o 6 ö ò ó ô õ ø
p q r s 7 ß
T U V 8 Ü Ù Ú Û
W X Y Z 9
t u v 8 ü ù ú û
w x y z 9
(space) , . 0 : ; _ “ ‘ ^ ~
A -> a
(space) , . 0 : ; _ “ ‘ ^ ~
a -> A
#
# @ € $ £ ¥ § < > {|} [\]
# @ € $ £ ¥ § < > {|} [\]
Note: While entering characters, the first display line shows all
characters assigned to the key. The actual position is marked by the >
< symbols.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Telephone Book
Adding a new entry
1. Press the Telephone Book soft key.
a
2. Press the arrow keys to scroll and highlight the
u
New Entry
New Entry option.
3. Press the OK soft key.
OK
4. Use the keypad to enter the phone number.
5. Press the OK soft key.
d
OK
6. Use the keypad to enter the name.
7. Press the OK soft key.
d
OK
Editing an entry
1. Press the Telephone Book soft key.
a
2. Press the arrow keys to scroll and highlight the
u
entry you wish to edit.
3. Press the Options soft key.
Options
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Telephone Book
4. Press the arrow keys to scroll and highlight the
u
Edit
Edit option.
5. Press the OK soft key.
OK
6. To delete the phone number, either:
e
•
Short press the C (Cancel) key to delete the
individual digits from the number.
•
Long press the C key to delete the entire
number.
Note: Move the cursor to the beginning or end
of the entry using the arrow (c) keys.
Note: Press Esc if you do not wish to change a
phone number or a name.
7. Use the keypad to enter the new number.
8. Press the OK soft key.
d
OK
9. To delete the old name, either:
e
•
Short press the C key to delete the individual
letters from the name.
•
Long press the C key to delete the entire name.
Note: Move the cursor to the beginning or end
of the entry using the arrow (c) keys.
Note: Press Esc if you do not wish to change a
phone number or a name.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Telephone Book
10. Use the keypad to enter the new name.
d
11. Press the OK soft key.
OK
Deleting an entry
1. Press the Telephone Book soft key.
a
2. Press the arrow keys to scroll and highlight the
u
entry you wish to delete.
3. Press the Options soft key.
Options
4. Press the arrow keys to scroll and highlight the
u
Delete
Delete option.
5. Press the OK soft key.
OK
Deleting all entries
To delete all entries from the Telephone Book, see “Clearing the
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Telephone Book
Using Quick Call
Use the Quick Call feature to place calls by dialing a one-digit code. You
can store a maximum of nine Quick Call numbers, one each for the nine
keys on the keypad. Quick Call numbers are assigned to phone numbers
already stored in the Telephone Book. To learn how to make a call using
Quick Call, see “Using Quick Call” on page 28.
Assigning a Quick Call number
1. Press the Telephone Book soft key.
a
2. Press the arrow keys to scroll and highlight the
u
entry to which you wish to assign a Quick Call
number.
3. Press the Options soft key.
Options
4. Press the arrow keys to scroll and highlight the
u
Quick Call
Quick Call option.
5. Press the OK soft key.
OK
d
OK
6. Assign a Quick Key by entering a one-digit
number from 1 to 9 as your quick call number.
7. Press the OK soft key.
Note: The Telephone Book entry shows the
assigned Quick Call number in front of the
name.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Telephone Book
Deleting a Quick Call assignment
1. Press the Telephone Book soft key.
a
2. Press the arrow keys to scroll and highlight the
entry to which you wish to assign a Quick Call
number.
u
3. Press the Options soft key.
Options
4. Press the arrow keys to scroll and highlight the
u
Quick Call
Quick Call option.
5. Press the OK soft key.
OK
6. Press the arrow keys to scroll and highlight the
u
Delete
Delete option.
7. Press the OK soft key.
OK
d
OK
8. Use the keypad to enter the Quick Call number
you wish to delete.
9. Press the OK soft key.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Telephone Book
Transferring phone numbers to the Telephone Book
Every number in the Redial List and Caller List can be transferred to the
Telephone Book. For more information, see:
•
transfer a number from the Redial List.
•
transfer a number from the Callers List.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Redial List
Using the Redial List
The Redial List stores the last ten internal and external parties dialed.
Use the Redial List to:
•
•
dial a number from the Redial list
transfer numbers to the Telephone Book
Dialing a number from the Redial List
1. Press the Redial soft key.
r
2. Press the arrow keys to scroll and highlight a
u
telephone number.
3. Press the Hook key.
h
Transferring a number to the Telephone
Book
Use this option to transfer any number from the Redial List to the
Telephone Book, where the number is treated as a new entry.
1. Press the Redial soft key.
r
2. Press the arrow keys to scroll and highlight a
u
telephone number.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Redial List
3. Press the Options soft key.
Options
4. Press the arrow keys to scroll and highlight the
u
Add To
Add to option.
5. Press the OK soft key.
OK
6. Press the arrow keys to scroll and highlight the
u
Telephone Book
Telephone Book option.
7. Press the OK soft key.
OK
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Caller List
Using the Caller List
The Caller List automatically stores a maximum of 20 accepted or missed
calls. After 20 entries are stored in the Caller List, each additional call
overwrites the oldest entry.
Use the Caller List to:
•
•
call a number from the Callers List
transfer numbers to the Telephone Book
The following are features of the Caller List:
•
•
•
When a call has not been answered, the text “Missed Calls” is shown
in the display.
When a call back is successfully executed for a Caller List entry, the
entry is removed from the Caller List.
When an incoming call is from a caller who is listed in the Telephone
Book, the name is displayed in the Caller List.
Table 3 defines symbols that appear in front of Caller List entries to
indicate the type of call.
Table 3: Caller List symbols
Symbol
Type of call
Missed call
J
o
/
Accepted call
Rejected call
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Caller List
Calling a number from the Caller List
1. Press the Info soft key.
i
2. Press the arrow keys to scroll and highlight the
Caller List
Caller List option.
3. Press the OK soft key.
OK
4. Press the arrow keys to scroll and highlight a
u
telephone number.
5. Press the Hook key to dial the number.
h
Transferring a number to the Telephone
Book
Use this option to transfer any number from the Caller List to the
Telephone Book, where the number is treated as a new entry.
1. Press the Info soft key.
i
2. Press the arrow keys to scroll and highlight the
u
Caller List
Caller List option.
3. Press the OK soft key.
OK
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Caller List
4. Press the Options soft key.
Options
5. Press the arrow keys to scroll and highlight the
u
Add To
Add to option.
6. Press the OK soft key.
OK
7. Press the arrow keys to scroll and highlight the
u
Telephone Book
Telephone Book option.
8. Press the OK soft key.
OK
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio settings
Audio settings
You can configure the audio preferences with the following options:
•
•
•
Adjusting the ringer volume
1. Press the Menu soft key.
Menu
2. Press the arrow keys to scroll and highlight the
u
Ringer Settings
Ringer Settings option.
3. Press the OK soft key.
OK
4. Press the arrow keys to scroll and highlight the
u
Volume Settings
Volume Settings option.
5. Press the OK soft key.
OK
Selecting the ringer melody
1. Press the Menu soft key.
Menu
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio settings
2. Press the arrow keys to scroll and highlight the
u
Ringer Settings
Ringer Settings option.
3. Press the OK soft key.
OK
4. Press the arrow keys to scroll and highlight the
u
Melody
Melody option.
5. Press the OK soft key.
OK
6. Press the arrow keys to scroll and highlight the
u
Incoming Calls
Incoming Calls option.
7. Press the arrow keys to scroll and highlight the
u
Incoming CallsX
Incoming CallsX option.
8. Press the OK soft key.
OK
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio settings
Setting earpiece/speaker volume
Use the Volume Settings menu option to set the volume for the speaker
or the earpiece.
1. Press the Menu soft key.
Menu
2. Press the arrow keys to scroll and highlight one
u
of the following:
— Earpiece
Earpiece
— Handsfree
Handsfree
3. Press the OK soft key.
OK
4. Press the arrow keys to increase or decrease
u
the volume.
Note: Alternatively, change the voice volume in
7 increments using digits 1 through 7 on the
keypad (d).
5. Press the OK soft key.
OK
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Options
Telephone Options
Use the Telephone Options menu to perform the following:
•
•
•
•
•
•
•
Accessing the Telephone Options menu
1. Press the Menu soft key.
Menu
2. Press the arrow keys to scroll and highlight the
u
Telephone Options option.
Telephone Options
3. Press the OK soft key.
OK
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Options
Setting the User Name
Use the User Name option to store a name which appears on the idle
display. The name can consist of a maximum 12 characters. For help on
1. Access the Telephone Options menu as
2. Press the arrow keys to scroll and highlight the
u
User Name
User Name option.
3. Press the OK soft key.
OK
4. Use the key pad to enter the user name.
5. Press the OK soft key.
d
OK
Selecting the handset language
Use the Language option to set the display language. You can select
from 12 different languages.
1. Access the Telephone Options menu as
2. Press the arrow keys to scroll and highlight the
u
Language
Language option.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Options
3. Press the OK soft key.
OK
u
OK
4. Press the arrow keys to scroll and highlight the
language you wish to use.
5. Press the OK soft key.
Setting the Emergency Call SOS number
Use the Emergency Call SOS option to store a number that can be dialed
in the event of an emergency. To learn how to dial the emergency
1. Access the Telephone Options menu as
shown in “Accessing the Telephone Options
2. Press the arrow keys to scroll and highlight the
u
Emergency Call
Emergency Call option.
3. Press the OK soft key.
OK
4. Use the keypad to enter the SOS number.
5. Press the Options soft key.
d
Options
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Options
6. Press the arrow keys to scroll and highlight the
u
Save
Save option.
7. Press the OK soft key.
OK
Configuring Attention Tones
Use the Attention Tones option to configure the handset to emit an
acoustic warning when:
•
•
•
•
•
a key is pressed (Key click)
a setting is confirmed (Confirm tones)
the end of a menu is displayed (End of menu)
the battery charge is too low (Battery alarm)
there is a danger of losing the radio link (Coverage warning)
1. Access the Telephone Options menu as
2. Press the arrow keys to scroll and highlight the
u
Attention Tones
Attention Tones option.
3. Press the OK soft key.
OK
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Options
4. Press the arrow keys to scroll and highlight one
u
of the following:
Key Click
— Key click
Coverage Warn
Battery Alarm
Confirm Tones
End of Menu
— Coverage warning
— Battery alarm
— Confirm tones
— End of menu
5. Press the OK soft key.
OK
Note: A check mark indicates the selected
option is activated.
Activating/deactivating Charger Answer
Activate Charger Answer if you wish to be able to answer incoming calls
by lifting the handset out of the charger. The call is ended when the
handset is returned to the charger.
1. Access the Telephone Options menu as
2. Press the arrow keys to scroll and highlight the
u
Charger Answer
Charger Answer option.
3. Press the OK soft key.
OK
Note: A check mark indicates the selected
option is activated.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Options
Activating/deactivating Silent Charging
Use the Silent Charging option to automatically turn off the ringer while
the handset is charging.
1. Access the Telephone Options menu as
2. Press the arrow keys to scroll and highlight the
u
Silent Charging
Silent Charging option.
3. Press the OK soft key.
OK
Note: A check mark indicates the selected
option is activated. The first display line shows
”Silent Charging” when the handset is placed in
the charger.
Adjusting Display Contrast
Use the Display Contrast option to adjust the display contrast.
1. Access the Telephone Options menu as
2. Press the arrow keys to scroll and highlight the
u
Disp. Contrast
Disp. Contrast option.
3. Press the OK soft key.
OK
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Options
4. Press the arrow keys to increase or decrease
u
the display contrast.
5. Press the OK soft key.
OK
56
Download from Www.Somanuals.com. All Manuals Search And Download.
System
System
Before you can make a telephone call using the DECT handset, the
handset must be subscribed to a DECT system. The handset can be
operated with a maximum of five DECT systems.
Note: When the handset is not yet subscribed to the system, the
display shows “Please, subscribe”.
Use the System menu to perform the following:
•
•
•
•
In order to carry out the following steps, you need to be familiar with the
Accessing the System menu
1. Press the Menu soft key.
Menu
2. Press the arrow keys to scroll and highlight the
u
System
System option.
3. Press the OK soft key.
OK
Subscribing the handset
57
Download from Www.Somanuals.com. All Manuals Search And Download.
System
Manually selecting the DECT system
If the handset has been subscribed to several DECT systems, use this
option to select which system the handset will use.
1. Access the System menu as shown in
2. Press the arrow keys to scroll and highlight the
u
Subscription
Subscription option.
3. Press the OK soft key.
OK
4. Press the arrow keys to scroll and highlight the
u
system name.
5. Press the Options soft key.
Options
6. Press the arrow keys to scroll and highlight the
u
Select
Select option.
7. Press the OK soft key.
OK
Note: A check mark indicates the selected
system is activated.
Enabling automatic DECT system selection
If you have subscribed your handset to several DECT systems and the
auto search function is enabled, the handset automatically selects one of
the systems. As a result, your handset is automatically ”logged-in” to
another of your subscribed DECT systems as soon as you move out of
58
Download from Www.Somanuals.com. All Manuals Search And Download.
System
the effective range of the current system. This function is disabled if a
specific system is selected using the option “Manually selecting the DECT
1. Access the System menu as shown in
2. Press the arrow keys to scroll and highlight the
u
Subscription
Subscription option.
3. Press the OK soft key.
OK
4. Press the arrow keys to scroll and highlight the
u
Auto Search
Auto Search option.
5. Press the OK soft key.
OK
59
Download from Www.Somanuals.com. All Manuals Search And Download.
System
Deleting a system
Use this function to remove a DECT system registration from your
handset.
Note: Be careful when deleting DECT systems from the handset. The
handset must be subscribed to at least one DECT system or it will not
work.
1. Access the System menu as shown in
2. Press the arrow keys to scroll and highlight the
u
Subscription
Subscription option.
3. Press the OK soft key.
OK
4. Press the arrow keys to scroll and highlight the
u
system name.
5. Press the Options soft key.
Options
6. Press the arrow keys to scroll and highlight the
u
Delete
Delete option.
7. At the Sure? prompt, choose one of the
following:
— Press the Yes soft key to delete the
Yes
No
selected DECT system.
— Press the No soft key to cancel changes.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
System
Editing the system name and phone number
Use this option to change the system name or phone number on the
handset:
1. Access the System menu as shown in
2. Press the arrow keys to scroll and highlight the
u
Subscription
Subscription option.
3. Press the OK soft key.
OK
4. Press the arrow keys to scroll and highlight the
u
system name.
5. Press the Options soft key.
Options
6. Press the arrow keys to scroll and highlight the
u
Edit
Edit option.
7. Press the OK soft key.
OK
8. Use the keypad to enter the new system name.
9. Press the OK soft key.
d
OK
61
Download from Www.Somanuals.com. All Manuals Search And Download.
System
10. Use the keypad to enter the new local phone
number.
d
11. Press the OK soft key.
OK
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Security functions
Security functions
The security functions are protected by a four-digit Personal Identification
Number (PIN). The PIN is needed only when the Read-Only option is
switched on.
Use the Security menu for the following:
•
•
•
•
If you have forgotten your PIN, contact your system administrator.
Accessing the Security menu
1. Press the Menu soft key.
Menu
2. Press the arrow keys to scroll and highlight the
u
Security
Security option.
3. Press the OK soft key.
OK
4. Use the keypad to enter the PIN.
d
Note: In the delivery state the PIN is set to
0000. For additional security, **** is displayed
when entering the PIN.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Security functions
5. Press the OK soft key.
OK
Resetting the handset
Use Handset Reset to return all settings to the delivery state, with the
exception of the Telephone Book, the PIN and system registrations.
1. Access the Security menu as shown in
2. Press the arrow keys to scroll and highlight the
u
Default Setting
Default Setting option.
3. Press the OK soft key.
OK
4. At the Sure? prompt, choose one of the
following:
— Press the Yes soft key to Reset the
handset.
Yes
No
— Press the No soft key to cancel changes.
Clearing the Telephone Book
Use this option to permanently delete all telephone entries.
1. Access the Security menu as shown in
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Security functions
2. Press the arrow keys to scroll and highlight the
u
Clear Phonebook
Clear Phonebook option.
3. Press the OK soft key.
OK
4. At the Sure? prompt, choose one of the
following:
— Press the Yes soft key to clear the
Yes
No
Telephone Book.
— Press the No soft key to cancel changes.
Changing the PIN
Use the Change PIN option to reset the pin to a number you will
remember. The numbers you enter are displayed as ****. For additional
security, the new PIN must be entered twice.
1. Access the Security menu as shown in
2. Press the arrow keys to scroll and highlight the
u
Change PIN
Change PIN option.
3. Press the OK soft key.
OK
4. Use the keypad to enter the old PIN.
u
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Security functions
5. Press the OK soft key.
OK
6. Use the keypad to enter the new PIN.
7. Press the OK soft key.
u
OK
8. Use the keypad to re-enter the new PIN.
9. Press the OK soft key.
u
OK
Activating Read-Only
Activating the Read-Only option prevents other users from making
changes to the handset settings. All menu functions are activated, but
personal settings are protected.
1. Access the Security menu as shown in
2. Press the arrow keys to scroll and highlight the
u
Read-Only
Read-Only option.
3. Press the OK soft key.
OK
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Security functions
4. At the Sure? prompt, choose one of the
following:
— Press the Yes soft key to activate Read-
Yes
No
Only.
— Press the No soft key to cancel changes.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Accessories
Table 4 lists accessories that are available for the DECT Handset 4025.
Table 4: Accessories
Item
Order Code
4025 Carry Case
Desk Top Charger
Charger Rack
Belt Clip
N0010676
A0541122
A0541124
A0541133
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms you should know
Terms you should know
Off-hook
Any line that is selected to either make a call or receive an
incoming call. The term off-hook is applied, regardless of whether
the user actually (a) lifts the handset, (b) presses a line key, (c)
the call is automatically answered at the set, or (d) a line is
automatically selected for an outgoing call.
Handsfree
A method of conversing with the party on the other end of the line
without lifting your handset.
Off-hook
Any line selected to make a call or receive an incoming call.
The term off-hook is applied whether (a) the end-user lifts up the
handset, (b) the end-user presses a line key, (c) the call is
automatically answered at the set, or (d) a line is automatically
selected for an outgoing call.
Soft keys (self-labeled)
A set of keys programmed by your system administrator. These
keys are located directly below the display area, and have four
programmable layers. The layers are accessed through the
More... key. These keys are also used to configure parameters in
the Telephone Option menu.
User Interface
Screen displays that interact with the user as a result of an action
or event.
Quick Call
A telephone number programmed to a single Quick Call key for
one-touch dialing.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms you should know
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index
A
Adjusting the earpiece/speaker
volume 30
E
Editing the system name and
phone number 61
Enabling automatic DECT system
selection 58
B
F
H
C
Calling a number from the caller list
45
I
K
D
L
Deleting a quick call assignment
40
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
M
T
Transferring a number to the tele-
phone book 42
O
Transferring a number to the tele-
phone book from the caller list 45
U
P
Q
V
R
S
Setting earpiece/speaker volume
49
Symbols indicating handset status
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Nortel Communication Server 1000
Nortel DECT Handset 4025
User Guide
Copyright © Nortel Networks Limited 2005
All Rights Reserved
Information is subject to change without notice. Nortel reserves the right
to make changes in design or components as progress in engineering
and manufacturing may warrant.
Nortel, Nortel (Logo), the Globemark, This is the Way, This is Nortel
(Design mark), SL-1, Meridian 1, and Succession are trademarks of
Nortel Networks.
Order Number: NTTQ38BA
Publication Number: N0035521 (N0010677)
Document Release: Standard 1.00
Date: February 2005
Produced in Canada
Internet address
Download from Www.Somanuals.com. All Manuals Search And Download.
|