Installation
BSG8ew and BSG12ew/aw/tw 1.0
Business Services Gateway
Document Status:Standard
Document Number: NN47928-302
Document Version: 02.01
Date: May 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
Contents
Getting Help over the phone from a Nortel Solutions Center . . . . . . . . . . . . . . . . . . . . 5
Getting Help through a Nortel distributor or reseller . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
GigE LAN ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
FXO ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
WAN interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Console port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
WiFi access point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Desktop mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Wall-mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Checking for software upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Hardware overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Product structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Field-replaceable units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Rack-mount shelf kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Power and system LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
BSG8ew Link Activity LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
FXS and FXO ports LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
WAN port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Contents
Installation and basic configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installation and basic configuration prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installation and basic configuration navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Installation options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installation options navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Cable connection navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Prerequisites to cable connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
System verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Prerequisites for system verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Prerequisites to ADSL WAN module replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Replacing the ADSL WAN module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
WiFi module replacement navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Prerequisites to WiFi module replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Basic procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Basic procedures navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
5
How to Get Help
This section explains how to get help for Nortel products and services.
Getting Help from the Nortel Web site
The best way to get technical support for Nortel products is from the Nortel Technical Support
Web site:
This site provides quick access to software, documentation, bulletins, and tools to address issues
with Nortel products. More specifically, the site enables you to:
•
•
download software, documentation, and product bulletins
search the Technical Support Web site and the Nortel Knowledge Base for answers to
technical issues
•
•
sign up for automatic notification of new software and documentation for Nortel equipment
open and manage technical support cases
Getting Help over the phone from a Nortel Solutions Center
If you don’t find the information you require on the Nortel Technical Support Web site, and have a
Nortel support contract, you can also get help over the phone from a Nortel Solutions Center.
In North America, call 1-800-4NORTEL (1-800-466-7835).
Outside North America, go to the following Web site to obtain the phone number for your region:
Getting Help from a specialist by using an Express Routing
Code
To access some Nortel Technical Solutions Centers, you can use an Express Routing Code (ERC)
to quickly route your call to a specialist in your Nortel product or service. To locate the ERC for
your product or service, go to:
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
6
How to Get Help
Getting Help through a Nortel distributor or reseller
If you purchased a service contract for your Nortel product from a distributor or authorized
reseller, contact the technical support staff for that distributor or reseller.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
7
New in this release
The following sections detail the hardware features of the Business Services Gateway 8-port
(BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw) with Ethernet WAN,
ADSL WAN, and T1/E1 WAN:
•
•
•
•
•
•
•
•
•
•
•
•
•
LEDs
The LEDs indicate the status of the power, system, and the ports. For more information, see “LED
Power source
The BSG8ew is powered by a 60 W 12 V DC power adapter with a power supply cord. The
BSG12ew/aw/tw is powered by a 132 W 48 V DC rear faceplate connected using a 4-pin DIN
FE LAN ports
The FE LAN ports connect the BSG to the LAN. For more information, see “LAN port LEDs” on
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
8
New in this release
GigE LAN ports
The Gigabit Ethernet (GigE) LAN port on the BSG8ew supports data transfer rates of up to 1 000
FXO ports
Foreign Exchange Office (FXO) is the port that connects to the telephone line coming from the
Public Switched Telephone Network (PSTN) provider. For more information, see “FXS and FXO
FXS ports
Foreign Exchange Station (FXS) is the port that allow connecting analog telephony devices such
as single-line telephones, fax machines, and modems. For more information, see “FXS and FXO
WAN interfaces
The BSG8ew and BSG12ew use a FE WAN interface. The BSG12tw uses a T1/E1 WAN
interface. The BSG12aw uses a ADSL/ADSL2+ WAN interface. For more information, see
Console port
The console port is used for debugging purposes. For more information, see “Connecting the
WiFi access point
The WiFi access point is an integrated IEEE802.11b/g WiFi access point.
Desktop mount
You can mount the BSG8ew/12ew/aw/tw unit on a desktop. For more information see
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
New in this release
9
Rack-mount shelf
You can mount the BSG8ew/12ew/aw/tw unit into a standard 19-inch equipment rack. For more
Wall-mount bracket
You can mount a BSG8ew into a wall-mount bracket. The BSG12ew/aw/tw cannot be mounted on
Checking for software upgrades
Nortel frequently updates the BSG software. Therefore, a standard part of any installation is to ensure your
system has the latest version of the software. For information about checking for and installing software
upgrades, see Administration (NN47928-600).
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
10
New in this release
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Hardware overview
The Business Services Gateway 8-port (BSG8ew) and Business Services Gateway 12-port
(BSG12ew/aw/tw) are integrated multiservice gateway products that provide application-level
support for voice, data, and video.
The three product variations offered for the BSG12ew/aw/tw are the BSG12ew with Ethernet
WAN, BSG12aw with ADSL/ADSL2+WAN, and BSG12tw with T1/E1 WAN. These products
are similar in design and differ only in their WAN interfaces. For more information, see
The BSG8ew supports up to 50 users. The BSG12ew/aw/tw supports up to 100 users.
The BSG8ew and BSG12ew/aw/tw provide a high-level security set of data features for direct
connectivity to an Internet Service Provider (ISP). The BSG8ew and BSG12ew/aw/tw support:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Line-rate forwarding
Layer-2 ethernet switching
Stateful firewall
Multi-scope Dynamic Host Configuration Protocol (DHCP) server
Network Address Translation (NAT)
Virtual Private Network (VPN) application
Integrated 802.11 b/g WiFi Access point providing WPA and WPA2 access
Survivable Session Initiation Protocol (SIP) Proxy and SIP Registrar
SIP User Agent (UA) to connect POTS to VoIP networks
Public Switched Telephone Network (PSTN)
Advanced application-aware QoS capabilities
Web User Interface (WebUI)
Simple Network Time Protocol (SNTP)
OSPFv2 and RIP for dynamic routing
Stateless firewall
SNMPv3
Product structure
The BSG8ew and the BSG12ew/aw/tw have the following components and field-replaceable units
(FRU).
Components
The BSG8ew ships with the following components:
•
BSG8ew
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Hardware overview
•
•
•
•
•
•
power supply (with country-specific power cord)
four rubber feet
1 x DC barrel connector retention plastic clip
1 x omni-directional antenna in plastic bag
Quick Install Guide (NN47928-300)
Regulatory and Safety Information Sheet (NN47928-101)
The BSG12ew/aw/tw ships with the following common components:
•
•
•
•
•
•
•
two antennas
power supply (with country-specific power cord)
four rubber feet
1 x unit
1 x console cable assembly
Quick Install Guide (NN47928-300)
Regulatory and Safety Information Sheet (NN47928-101)
The BSG12ew/aw/tw ships with the following model-specific components:
•
•
•
BSG12ew unit with factory-installed WAN module filler plate cover and rear WiFi module
BSG12aw unit with factory-installed ADSL/ADSL2+ WAN module and rear WiFi module
BSG12tw unit with factory-installed WAN module filler plate cover and rear WiFi module
Field-replaceable units
The BSG8ew has the following field-replaceable units (FRU):
•
•
•
•
•
BSG8 power supply
1 x Power Adapter Wall-Mount holder
country-specific power cords
BSG mounting bracket upgrade kit
antenna
The BSG12ew has the following FRUs:
•
•
•
•
•
BSG12ew/aw/tw power supply
country-specific power cords
1 x WiFi module FRU
1 x Console Cable assembly FRU
two antennas
The BSG12aw has the following FRUs:
•
•
•
•
BSG12ew/aw/tw power supply
country-specific power cords
1 x ADSL module FRU
1 x WiFi module FRU
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware overview 13
•
•
1 x Console Cable assembly FRU
two antennas
The BSG12tw has the following FRUs:
•
•
•
•
•
BSG12ew/aw/tw power supply
country-specific power cords
1 x WiFi module FRU
1 x Console Cable assembly FRU
two antennas
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Hardware overview
Product description
BSG8ew ports and connectors
System LED
Power LED
LEDs diagram
GigE LAN port
Reset button
FE WAN port
Power connector
FE LAN ports
FXO port
(analog line)
Retention clip
Emergency port
for 911 support
FXS ports
(analog phones)
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Hardware overview
The following table provides descriptions of the components of the BSG8ew/12ew/aw/tw
faceplates.
Bsg8 ew or BSG
Component
12ew/tw/aw
Description
Power and system LEDs
Both
show the power and system status
Power Over Ethernet (PoE)
LEDs
BSG12ew/aw/tw only indicate that the associated port is receiving power. There is
one PoE LED for each LAN port.
Link/acc status LEDs
Indicate the activity and status of the LAN port. The LED
becomes active when you connect an Ethernet cable to the
corresponding LAN port.
Power connector
Both
The BSG8ew uses a 12 V DC power adaptor connected with
a faceplate barrel connector.
The BSG12ew/aw/tw use a 48 V DC rear faceplate connected
with a 4-pin DIN connector.
Retention clip mounting hole BSG8ew only
Reset system
A small hole into which you insert the power retention clip.
The retention clip secures the power connector to the unit. For
BSG12, the 4-pin DIN connector has self-retention
mechanical design.
On the BSG8ew, the system is reset using an external reset
button.
The board is designed to offer an external physical reset
button from the faceplate as a pin-hole access. The reset
asserted for less than 5 seconds activates a general digital
board reset without affecting system parameters stored in
FLASH memory. The reset asserted for more than 5 seconds
activates a total system revert to factory default parameters.
In this scenario, all provision and configured data in persistent
memory (FLASH) is lost and factory defaults values are
restored.
If one of the sub-systems fails during reset, a syslog is
generated and stored in FLASH. The log contains the ID of
the failed subsystem.
On the BSG12ew/aw/tw, the system is reset using an
hardware reset to factory. The hardware reset is performed by
connecting a serial console cable to console port faceplate.
The standard console cable is provided out of box shipping. In
the process, user needs to reset the BSG 12 in to factory
defaults. Connect to the console cable to pc which is not
protected and use the following CLI command.
bsg# system set factory default
bsg# reload
This will reboot BSG 12 with factory default settings.
FE LAN ports
GigE LAN port
NN47928-302
On the BSG8ew, seven FE LAN ports are used to connect to
the LAN.
The BSG12tw and BSG12aw have twelve PoE enabled FE
LAN ports to connect to the LAN.
The BSG12ew has eleven PoE enabled FE LAN ports to
connect to the LAN.
On the BSG8ew, one gigabite ethernet (GigE) LAN port
supports data transfer rates of up to 1 000 Mbit/s.
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware overview 19
Bsg8 ew or BSG
12ew/tw/aw
Component
Description
FXO port
All BSG units have one Foreign Exchange Office (FXO) port
that connects to the telephone line coming from the
Public Switched Telephone Network (PSTN) provider.
FXS ports (2)
WAN interface
All BSG units have two FXS ports to connect to the service
provider using a single RJ45.
For the BSG8, the FXS2 line maintains a connection to FXO
during a power outage for emergency dialing.
For the BSG12, the FXS1 line maintains a connection to FXO
during a power outage for emergency dialing.
The BSG8ew and BSG12ew have one FE WAN interface.
The BSG12aw has an ADSL/ADSL2+ WAN interface.
The BSG12tw has two T1/E1 WAN interfaces.
If the BSG8ew/12ew/aw/tw loses the primary WAN connection
(Ethernet, DSL, the or T1/E1), all calls from the analog FXS
phone or any of the Session Initiation Protocol (SIP) phones
associated with the SIP server via WAN connection can be
routed to the FXO line, if configured in the backup dial plan. If
an existing, non-emergency call is in progress on the FXO line
during the incident emergency call attempt, the
non-emergency call is terminated and the emergency call is
propagated in its place.
Console
For BSG12ew/aw/tw only. An RJ45 console port for
debugging purposes.
WiFi access point
All units use integrated IEEE802.11b/g WiFi access point.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Hardware overview
Hardware
The following BSG8ew/12ew/aw/tw hardware items simplify the setup and connection of the
system:
•
•
•
•
Rack-mount shelf kit
To mount a BSG8ew/12ew/aw/tw in a standard 19-inch equipment rack, you need a rack-mount
shelf. Install the rack-mount shelf in the equipment rack, and then slide the BSG8ew/12ew/aw/tw
into the tabs on the rack-mount shelf. These tabs prevent the unit from sliding or falling off the
Rack-mount shelf installed in an equipment rack
Equipment rack
Rack-mount shelf
There is enough space on the rack-mount shelf to install another unit, such as a BCM50 or a
second BSG8ew/12ew/aw/tw, beside the original unit.
The rack-mount shelf has slots molded into its surface to which you attach the BSG8ew/12ew/aw/
tw. By attaching the BSG8ew/12ew/aw/tw to these slots, you can prevent someone from
accidently knocking them off the rack-mount shelf.
If you install additional units, you can install a second unit on the shelf beside the first unit. You
can install another unit on top of each of the first two units. Nortel recommends a maximum of
four units for each rack-mount shelf.
This kit provides the parts to mount up to four BSG8ew/12ew/aw/tw units into a standard 19-inch
equipment rack. The BSG8ew/12ew/aw/tw mounts into the tabs on the rack-mount shelf. These
tabs prevent the unit from sliding around or falling off the shelf. If the BSG8ew/12ew/aw/tw
system includes additional units, you can mount another unit onto a second set of tabs on the
rack-mount shelf. You can mount any additional units to tabs on the top of the other units.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware overview 21
If more than one BSG8ew/12ew/aw/tw unit is mounted on top of other units, only the unit lowest
from bottom should have WiFi activated to prevent radio interference. The stacked antennas may
have to be laterally adjusted.
Wall-mount bracket kit
Only the BSG8ew unit can be mounted on a wall.
To mount a BSG8ew on the wall, you need a wall-mount bracket and a BSG8ew wall-mount kit.
(The wall-mount kit contains a BSG8ew-specific door, antenna adapter, and power supply holder.)
You attach the wall-mount bracket to the wall, and then you install the unit in the wall-mount
bracket. If your system includes additional units (BCM50, BES50, or BSG8ew), you need a
wall-mount bracket for each unit.
Each wall-mount bracket includes a cable-management tray to store and organize the cables
connected to the BSG8ew. To position the antenna against the unit, an antenna adapter is also
BSG8ew in a wall-mount bracket
Wall-mount bracket
BSG8ew
Antenna adapter
Cable-management tray
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Hardware overview
Single power supply holder
The single power supply holder enables you to install one power supply unit on the wall next to
your BSG8ew. The power supply holder keeps the power cables neatly organized.
Power supply
The BSG8ew is powered by a 60 W 12 V DC power supply with a power supply cord. The
IEC320-C13 AC connector is available for all supported regions. You must have one power
supply for each unit in your system. For more information, see “BSG8ew power supply package”
The BSG12ew/aw/tw is powered by a 132 W 48 V DC power supply with a power supply cord.
The IEC320-C13 AC connector is available for all supported regions. You must have one power
supply for each unit in your system. For more information, see “BSG12ew/aw/tw power supply
BSG8ew power supply package
12 V DC barrel
connector
Power supply
cord
Power supply cable
(NA shown)
To wall outlet
Only the BSG12ew/aw/tw provides Power over Ethernet (PoE) functionality. The BSG12ew/aw/
tw is powered by a 132-watt switching power adapter. The unit is designed to automatically
balance PoE power over all ports.
After all available PoE power is assigned, the PoE on the next port is disabled. The Ethernet
connection is still available, but no power is available from the port.
The power supply package is included with the BSG8ew/12ew/aw/tw.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Hardware overview
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
25
LED functionality
The Business Services Gateway 8-port (BSG8ew) and Business Services Gateway 12-port
(BSG12ew/aw/tw) have LEDs that indicate the status of the power, system, and the ports. The
LEDs are
•
•
•
•
Power and system LEDs
The BSG8ew/12ew/aw/tw has a power LED and a system LED. For more information about the
BSG8ew power and system LEDs
System LED
Power LED
Power LED
System LED
Description
Solid green
Solid green
All BSG services are functioning and the system is ready for normal
operation.
Solid green
Solid green
Solid green
Off
Slow flashing green The system is initializing, not ready for service.
Fast flashing green System boot failure.
Fast flashing green There is a major or critical alarm on the BSG series.
Off
No power to the BSG8ew/12ew/aw/tw.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
26
LED functionality
LAN port LEDs
Each BSG unit has an LED that indicates link activity. Each BSG12ew/aw/tw unit has an
additional LED that indicates whether power over internet (PoE) is enabled.
BSG8ew Link Activity LEDs
Each LAN port on the BSG8ew/12ew/aw/tw has one LED that indicates link activity. This LED
turns on when an Ethernet cable is connected to the corresponding port. For more information
BSG8ew link activity LEDs
Link activity LEDs
The following table shows the status of link activity for the BSG8ew LAN port LED:
Link/Act LED Status
Description
Green
Green
Green
Amber
Amber
Amber
On
The WAN/ LAN port is Link Up at 100 Mb/s.
The WAN/LAN port is sending or receiving data.
The WAN/LAN port is not operating.
Flashing
Off
On
The WAN/ LAN port is Link Up at 10 Mb/s.
The WAN/LAN port is sending or receiving data.
The WAN/LAN port is not operating.
Flashing
Off
The following table shows the status of link activity for the BSG8ew GigE (port 8) LED:
Link/Act LED Status
Description
Green
Green
Green
Amber
Amber
Amber
On
The LAN port is Link Up at high speed (1000 Mb/s).
The LAN port is sending or receiving data.
The LAN port is not operating.
Flashing
Off
On
The LAN port is Link Up at low speed (100/10 Mb/s).
The LAN port is sending or receiving data.
The LAN port is not operating.
Flashing
Off
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
LED functionality 27
The following table shows the status of link activity for the BSG8ew WAN port LED:
Link/Act LED Status
Description
Green
Green
Green
Amber
Amber
Amber
On
The WAN/LAN port is Link Up at 100 Mb/s.
The WAN/LAN port is sending or receiving data.
The WAN/LAN port is not operating.
The WAN/LAN port is Link Up at 10/10 Mb/s.
The WAN/LAN port is sending or receiving data.
The WAN/LAN port is not operating.
No connection.
Flashing
Off
On
Flashing
Off
Both WAN/
Off
LAN port LEDs
BSG12ew/aw/tw link activity and PoE LEDs
Each LAN port on the BSG12ew/aw/tw has one LED that indicates link activity and one PoE
LED. The link activity LED turns on when an Ethernet cable is connected to the corresponding
port. The PoE LED indicates whether PoE is enabled. For more information, see “BSG12ew/aw/
table.
BSG12ew/aw/tw link activity LEDs
Link activity LEDs
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
28
LED functionality
BSG12ew/aw/tw POE LEDs
PoE LEDs
The following table shows the LED colour and status for the BSG12 FE port LED:
LED colour
Status
Solid green
Link Up.
No PoE.
Flashing
green
Link active.
No PoE.
Solid amber
Link up.
PoE active.
Flashing
amber
Link active.
PoE active.
FXS and FXO ports LEDs
The BSG8ew/12ew/aw/tw units have an LED for each analog telephony port. For more
tw FXS and FXO port LEDs” on page 29, and the following table.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
LED functionality 29
BSG8ew FXS and FXO port LEDs
FXS port LEDs
FXO port LED
BSG12ew/aw/tw FXS and FXO port LEDs
No FXS port LEDs
No FXO port
LED
Status
Description
Green
Green
Green
Solid green Off-hook.
Flashing
Off
Call ID generation and ringing.
On-hook.
WAN port LEDs
The BSG8ew has two LEDs for the WAN port. For more information about the LEDs, see
page 31 and the following tables.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
LED functionality 31
Link/Act LED Status
Description
Green
Green
Green
On
The WAN port is operating at 100 Mb/s.
The WAN port is sending or receiving data.
The WAN port is not operating.
Flashing
Off
Link/Act LED Status
Description
Amber
Amber
Amber
On
The WAN port is operating at 10 Mb/s.
The WAN port is sending or receiving data.
The WAN port is not operating.
Flashing
Off
BSG12ew/aw/tw WAN interface LEDs
I/O Port
Mode
LED
Description
12-10/100
Ethernet
ports
Bi-color LED Solid
green
Link is available but not active. PoE is not active.
Flashing
green
Link is available and active. PoE is not active.
Link is available but not active. PoE is active.
Link is available and active. PoE is active.
Link is available.
Solid
amber
Flashing
amber
ADSL
Single-Color Solid
LED
green
Flashing
green
Link is active.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
32
LED functionality
I/O Port
VoIP1000
Mode
LED
Description
No LEDs
(FXO/FXS)
E1/T1 * 2
Bi-color LED Solid
green
The E1/T1 line is synchronized with the BSG.
Solid
amber
The E1/T1 line is not synchronized with the BSG.
The E1/T1 is remote loopback.
Blink
amber
Modem
No LEDs
(RJ11 rear)
System
LED1
Bi-color LED Solid
green
All BSG8ew/12ew/aw/tw services are functioning, and the system is ready
for normal operation.
Solid
amber
All BSG8ew/12ew/aw/tw services are not functioning, and the system is
not ready for normal operation.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Installation and basic configuration
Install the Business Services Gateway 8-port (BSG8ew) or Business Services Gateway 12-port
(BSG12ew/aw/tw) hardware and power supply and connect the cables for analog telephones and
lines, the LAN, and the WAN.
Installation and basic configuration prerequisites
•
Determine the location for the BSG8ew/12ew/aw/tw, telephones, and other equipment based
on space and electrical requirements.
•
•
Order the required trunks from the telephone service provider for BSG 12tw.
The installation area must be:
— a minimum of 4 m (13 ft) from equipment such as photocopiers, electrical motors, and
other equipment that produces electromagnetic, radio frequency, and electrostatic
interference
— within 1.5 m (5 ft) of a three-wire grounded electrical outlet
— clean, dry, well ventilated, and free of traffic and excess dust
— within the temperature range of 5°C and 50°C (40°F and 120°F)
— from 20% to 80% non condensing relative humidity
— structurally strong and with enough space to support the BSG8ew/12ew/aw/tw units
— a minimum of 46 cm (18 in.) from the floor
— of sufficient height from the floor to prevent water damage
•
•
Power must be supplied from a non switched, unobstructed outlet within 1.5 m (5 ft) of the
BSG8ew/12ew/aw/tw.
The supplied power must be a dedicated 110 V to 120 V AC nominal (or 220 V to 240 V AC
nominal), 50 to 60 Hz, 15 A minimum service with a third-wire safety ground. The third-wire
safety ground provides shock protection and prevents electromagnetic interference.
Caution: Risk of damage to equipment
To avoid damaging the equipment, you must connect the BSG8ew/12ew/aw/tw to an
outlet with a third-wire ground. Use only the BSG power supply that comes with the
equipment, and a three-wire power outlet.
Caution: Check ground connections
Ensure that the electrical ground connections of the power utility, telephone lines, and
internal metal water pipe system, if present, are connected. If these ground connections are
not connected, contact the appropriate electrical inspection authority. Do not try to make
the connections yourself.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Installation and basic configuration
•
You can connect the power supply to a power bar. The total length of the power cables from
the power supply to the electrical outlet (including power bar) must not exceed 2 m (6.5 ft).
You must use a power bar approved by an appropriate National Test Body, with a third-wire
ground. Nortel recommends that you do not use an extension cord between the power supply
and the power bar or between the power bar and the electrical outlet.
•
•
You cannot install the BSG unit behind another router. If you install the BSG behind another
router, it may not operate properly with SIP traffic.
You must meet the following parameters for an analog telephony devices (analog loop):
— maximum DC loop resistance of 208 Ω
— maximum cable length (0.5 mm or 24-AWG) of 1220 m (4000 ft)
Installation and basic configuration navigation
•
•
•
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Installation options
The following sections describe the various physical installation options for the Business Services
Gateway 8-port (BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw).
Installation options navigation
•
•
•
•
•
Prerequisites to installation options
•
Similar units, such as BCM50, BES50, and BSG8ew/12ew/aw/tw, are designed to install
side-by-side or on top of one another. Take this option into account when planning your
system installation.
•
•
BSG12ew/aw/tw does not provide wall-mount upgrade kit for wall installation.
If you are stacking multiple BSG8ew/12ew/aw/tw units, activate WiFi on only the bottom
unit to prevent radio interference.
•
•
•
Verify that your selected installation method meets the acceptable environmental
conditions.
To keep the BSG8ew/12ew/aw/tw operating at the optimal internal temperature, keep the
top, sides, and rear clear of obstructions and away from the exhaust of other equipment.
Do not place anything other than a BSG8ew/12ew/aw/tw, BCM50, or BES50 on top of a
BSG8ew/12ew/aw/tw.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Installation options
Installing the BSG8ew/12ew/aw/tw on a desktop or shelf
Use this procedure to install a BSG8ew/12ew/aw/tw on a desktop or shelf.
Prerequisites
•
Obtain the four supplied rubber feet for the BSG8ew/12ew/aw/tw.
Procedure steps
Step Action
1
If installing the BSG8ew, insert the power supply retention clip.
The BSG12ew/aw/tw uses a different power connector, which does not require
a retention clip.
2
Attach the four self-adhesive rubber feet to the bottom of the BSG8ew/12ew/aw/
tw by peeling off the paper backing and placing the feet on the unit as indicated
in the following figure.
Attach feet here
3
4
Position the BSG8ew/12ew/aw/tw on a desktop or shelf. Make sure you leave
enough space around the unit for ventilation and access to the cables.
Install the power supply next to the BSG8ew/12ew/aw/tw.
The power supply must be within 1.5 m (5 feet) of the BSG8ew/12ew/aw/tw
sand within 1.5 m (5 feet) of the AC power outlet.
End
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation options 37
Installing the BSG8ew on a wall
Use this procedure to install a BSG8ew on a wall. The BSG12ew/aw/tw cannot be installed on a
wall.
Prerequisites
•
Obtain a Wall-Mount Assembly Kit (NTBU1225), which contains the door, the power
supply holder, and the wall-mount bracket.
•
Nortel recommends you use a plywood backboard 2 cm (3/4 in.) thick to simplify
installing multiple units (such as BCM50, BES50, and BSG8ew). However, because the
compact size and light weight of these units, a backboard is not required.
•
•
If you use the backboard, mount it securely on the wall.
If you do not use a backboard, use the appropriate wall anchors or ensure the screws are in
a stud.
•
•
Obtain five #8 x 2 cm (#8 x 0.75 in.) round-head wood screws to attach the unit to the wall
(supplied in kit).
You must mount similar units (such as BCM50, BES50, and BSG8ew) side-by-side on the
wall. Do not mount units on top of each other.
Procedure steps
Step Action
1
Prepare the wall-mount bracket by removing the alignment tabs:
If this is the only unit in your system, remove the alignment tabs on the right side
of the wall-mount bracket.
If this is the last unit in a system with multiple units, remove the alignment tabs
on the left side of the wall-mount bracket.
2
3
Place the wall-mount bracket on the wall or backboard and then mark the
location of the mounting screws.
Use the alignment tabs to ensure the wall-mount brackets are properly aligned.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Installation options
4
Open the cable management door.
1
2
1
2
1
2
Cable Management Door
5
6
Use two of the supplied screws to attach the wall-mount bracket to the wall
through the cable trough.
Use three of the supplied screws to attach the upper portion of the wall-mount
bracket to the wall as shown in the following figure. Leave approximately 0.5 cm
(0.25 in.) of the screw exposed.
1
2
1
2
1
2
Note: Nortel recommends you install the screws
in the three holes labeled 1 or the three holes
labeled 2.
7
Align the holes of the wall-mount bracket over the screws.
Slide the bracket down onto the screws.
8
9
Tighten the wood screws against the wall-mount bracket.
Insert the power supply retention clip into the BSG8ew.
10
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation options 39
11
Slide the wall-mount lock fully to the right (unlock position) as shown in the
following figure.
12
13
Align the feet on the unit with the four holes in the wall-mount bracket.
Press the unit against the wall-mount bracket and slide the unit down until it
clicks in place.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Installation options
14
Slide the wall-mount lock to the left (lock position).
15
16
Use the supplied screw to secure the wall-mount lock into position.
Open the cable management door on the wall-mount bracket.
You must replace the door on the standard small system wall-mount bracket.
The replacement door has a notch to accommodate the BSG8ew antenna.
Cutout detail
17
18
Push up on the door to pop the hinges apart and remove the door.
Line up the hinges on the replacement door with those on the wall-mount
bracket.
19
20
21
Push down on the door to snap the hinges into place.
Open the cable management door.
Screw the antenna adapter into the antenna position on the BSG8ew.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation options 41
22
Attach the antenna to the antenna adapter so that the antenna is parallel with
BSG8ew.
Antenna
23
Place the power supply mounting bracket on the wall close to the BSG8ew.
The power supply must be within 1.5 m (5 ft) of the BSG8ew and within 1.5 m (5
ft) of the AC power outlet.
The bracket can be mounted horizontally or vertically.
24
25
26
Use the two supplied screws to attach the power supply mounting bracket to the
wall.
Install the power supply into the mounting bracket by rotating the power supply
underneath the Nortel logo.
Slide the power supply into place.
End
Installing the BSG8ew/12ew/aw/tw in an equipment rack
Use this procedure to install a BSG8ew/12ew/aw/tw in a standard 19-inch equipment rack along
with your other networking and telecommunications equipment.
Prerequisites
•
•
Obtain the rack-mount shelf kit.
Use only the screws supplied with the rack-mount kit. Other screws can damage the unit.
Procedure steps
Step Action
1
2
3
Position the rack-mount shelf in the equipment rack.
Align the holes in the rack-mount shelf with the holes in the equipment rack rails.
Fasten the rack-mount shelf to the equipment rack using the four supplied
screws as shown in the following figure.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Installation options
4
5
Place the BSG8ew/12ew/aw/tw on the rack so that the feet of the unit are in the
depressions in the shelf.
Move the unit forward until the feet touch the front side of the depressions, and
then slide the unit back until the feet click in place on the slots in the
depressions.
6
To further secure the unit, use the four self-tapping screws (for plastic) supplied
with the rack-mount kit to attach the unit to the rack-mount shelf.
Make sure the screw holes in the unit are aligned with the holes in the
rack-mount shelf, and then insert the four screws through the holes in the bottom
of the shelf and into the screw holes in the bottom of the unit.
7
8
Place the power supply behind the BSG8ew/12ew/aw/tw on the back of the
rack-mount shelf.
Make sure the power supply is on its side with the label facing the back of the
shelf.
Use two cable ties to secure the power supply to the rack-mount shelf.
End
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation options 43
Installing the BSG8ew/12ew/aw/tw on top of another unit
Use this procedure to install a BSG8ew/12ew/aw/tw on top of a BCM50 or BES50 in a desktop or
rack-mount installation.
Procedure steps
Step Action
1
If installing the BSG8ew, insert the power supply retention clip.
The BSG12ew/aw/tw uses a different power connector, which does not require
a retention clip.
2
Place the BSG8ew/12ew/aw/tw on top of a BCM50 or BES50. If the rubber feet
are installed, remove them. Make sure the feet of the BSG8ew/12ew/aw/tw are
in the slots on the top of the other unit and in front of the slots as shown in the
following figure.
Slots
Feet
3
Slide the unit back until it clicks in place on the slots.
End
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Installation options
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Cable connection
The following sections describe how to connect power, LAN devices, analog lines, and analog
telephones to the Business Services Gateway 8-port (BSG8ew) and the Business Services
Gateway 12-port (BSG12ew/aw/tw) and how to connect the BSG8ew and the BSG12ew/aw/tw to
the WAN and LAN. For the BSG12ew/aw/tw, the following section describes how to connect the
console.
Cable connection navigation
•
•
•
•
•
•
•
•
Prerequisites to cable connection
•
•
Install the BSG8ew/12ew/aw/tw.
For the locations of the BSG8ew/12ew/aw/tw ports, see “BSG8ew ports and connectors”
Connecting power to the BSG8ew
Use this procedure to connect power to the BSG8ew.
Prerequisites
•
•
Install the BSG8ew.
If the BSG8ew is mounted on a wall, install the single power supply mounting bracket.
Procedure steps
Step Action
1
2
3
Rotate the retention clip so the power outlet is open.
Plug the power-supply cord into the BSG8ew.
Rotate the retention clip so that it locks the power-supply cord in place.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Cable connection
4
5
Plug one end of the power-supply cable into the BSG8ew power supply.
Plug the other end of the power-supply cable into the AC power source (wall
outlet).
The BSG8ew boots and the system LED turns solid green.
End
Connecting power to the BSG12ew/aw/tw
Use this procedure to connect power to the BSG12ew/aw/tw.
Prerequisites
•
Install the BSG12ew/aw/tw.
Procedure steps
Step Action
1
2
Plug one end of the power-supply cable into the BSG12ew/aw/tw power supply.
Plug the other end of the power-supply cable into the AC power source (wall
outlet).
The BSG12ew/aw/tw boots and the system LED turns solid green.
End
Connecting the BSG8ew/12ew/aw/tw to the WAN
Use this procedure to connect the BSG8ew/12ew/aw/tw to the WAN.
Prerequisites
•
•
Connect power to the BSG8ew/12ew/aw/tw.
Obtain a standard Ethernet cable.
Procedure steps
Step Action
1
2
3
Plug one end of a standard Ethernet cable into the WAN port on the front of your
BSG8ew/12ew/aw/tw.
Plug the other end of the Ethernet cable into your WAN edge device (for
example, an external ADSL modem or cable modem).
Plug the RJ11 telephone jack into the ADSL WAN module if you have a
BSG12aw.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable connection 47
4
Connect the T1 connection. The PSTN provider brings the adapter box
(RJ48<->RJ45) at the SMB premises to expose native RJ45 type connectors
and connect to the BSG12tw WAN.
Refer to the documentation for your WAN edge device for proper setup and
configuration of the device.
End
Connecting the BSG8ew/12ew/aw/tw to the LAN
Use this procedure to connect the BSG8ew/12ew/aw/tw to the LAN.
Prerequisites
•
•
Connect power to the BSG8ew/12ew/aw/tw.
Obtain a standard Ethernet cable.
Procedure steps
Step Action
1
Plug one end of a standard Ethernet cable into a LAN port on the front of your
BSG8ew/12ew/aw/tw.
2
Plug the other end of the Ethernet cable into your LAN.
End
Connecting LAN devices to the BSG8ew/12ew/aw/tw
Use this procedure to connect LAN devices to the BSG8ew/12ew/aw/tw.
Prerequisites
•
•
Connect power to the BSG8ew/12ew/aw/tw.
Obtain one standard Ethernet cable for each LAN device.
Procedure steps
Step Action
1
Plug one end of a standard Ethernet cable into one of the LAN ports on the front
of your BSG8ew/12ew/aw/tw.
2
3
Plug the other end of the ethernet cable into your LAN device.
Repeat steps 1 and 2 for each additional LAN device you want to connect to the
BSG8ew/12ew/aw/tw.
End
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Cable connection
Connecting the BSG8ew/12ew/aw/tw PSTN Central Office
Use this procedure to connect the BSG8ew/12ew/aw/tw PSTN Central Office (CO).
Prerequisites
•
•
Connect power to the BSG8ew/12ew/aw/tw.
Obtain a telephone cable with an RJ-11 modular jack.
Procedure steps
Step Action
1
Plug the RJ-11 modular wall jack from PSTN into the FXO port of the BSG 8ew/
12ew/aw/tw. The FXS are then connected to analog phone lines.
2
Plug the other end of the cable into the telephone company demarcation blocks
of the building.
End
Connecting analog telephones to the BSG8ew/12ew/aw/tw
Use this procedure to connect analog telephones to the BSG8ew/12ew/aw/tw.
Prerequisites
•
•
Connect power to the BSG8ew/12ew/aw/tw.
Obtain a telephone cable with an RJ-11 modular jack.
Procedure steps
Step Action
1
Plug the RJ-11 modular wall jack from PSTN into the FXO port of the BSG8ew
or BSG12ew/aw/tw. The FXS are then connected to analog telephones.
Plug the other end of the cable into the local connecting blocks.
End
2
Connecting the console to the BSG12ew/aw/tw
Use this procedure to connect the console to the BSG12ew/aw/tw for debugging purposes. A
console cable is provided in the BSG12 shipping box. The console cable is a CAT5 Ethernet cable
with adapter to DB-9 connector that connects to the PC.
Prerequisites
•
Connect power to the BSG12ew/aw/tw.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable connection 49
Procedure steps
Step Action
1
2
Connect one end of the RS232 cable to the serial port of the laptop.
Connect the other end of the RS232 cable to the console port of the BSG12ew/
aw/tw.
End
Variable definitions
Use the data in the following table to help you connect the console to the BSG12ew/aw/tw for
debugging purposes.
Variable
Value
RS 232
Following are the RS 232 connection settings.
•
•
•
•
baud rate = 9600
bits = 8 bits
Parity = None
Flow control = None
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Cable connection
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
51
System verification
The following sections describe how to test the basic functionality of the Business Services
Gateway 8-port (BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw).
System verification navigation
•
Prerequisites for system verification
•
The BSG8ew/12ew/aw/tw must be connected and powered up.
Verifying the physical system status
Complete this procedure to verify the status of the system.
For information and procedures on monitoring system status using the BSG8ew/12ew/aw/tw Web
user interface, see Administration (NN47928-600).
Procedure steps
Step Action
1
2
Check the status of the power LED to verify that the system is receiving power.
Check the status of the system LED to verify that the system is active.
End
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
52
System verification
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Power supply replacement
The following sections describe how to replace the power supply in a Business Services Gateway
8-port (BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw).
Power supply replacement navigation
•
•
Prerequisites to power supply replacement
•
If the system is still operating, perform the procedure “Shutting down the BSG8ew/12ew/
•
After the system shuts down, perform the procedure “Disconnecting the cables” on page
65.
•
•
•
Obtain a power supply for the BSG8ew/12ew/aw/tw from Nortel.
Ensure you have an antistatic wrist grounding strap.
Plug the DC side of the power adapter to the BSG unit first, then plug in the AC side of the
power adapter.
Caution: Risk of equipment damage
You must wear an antistatic grounding strap at all times when handling
electronic components. Failure to do so can result in damage to the equipment.
Removing the power supply
Use this procedure to remove the power supply for the BSG8ew/12ew/aw/tw.
Prerequisites
•
Do not operate the BSG8ew/12ew/aw/tw with the cover removed.
Danger: Risk of electrical shock
Disconnect the power cord, telephone cables, and network cables before opening the
BSG8ew/12ew/aw/tw main unit.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Power supply replacement
Procedure steps
Step Action
1
Remove the telephony and data networking lines from the BSG8ew/12ew/aw/
tw.
2
While removing a BSG8ew, rotate the power supply retention clip to free the
power supply cord.
3
4
5
Remove the power supply cord from the BSG8ew/12ew/aw/tw.
Remove the power supply cord from the AC wall outlet.
Remove the power supply from the table, rack-mount shelf, or wall-mount
bracket.
End
Connecting the new power supply
Use this procedure to connect the new power supply for the BSG8ew/12ew/aw/tw.
Prerequisites
•
Do not operate the BSG8ew/12ew/aw/tw with the cover removed.
Danger: Electrical shock warning.
Disconnect the power cord, telephone cables, and network cables before opening the
BSG8ew main unit.
Procedure steps
Step Action
1
Connect the new power supply. See “Connecting power to the BSG8ew” on
Reconnect the telephony and data networking lines that you removed.
End
2
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
55
ADSL WAN module replacement
The following sections describe how to replace the ADSL WAN module in a Business Services
Gateway 12-port (BSG12aw).
ADSL WAN module replacement navigation
•
•
•
•
Prerequisites to ADSL WAN module replacement
•
•
•
If the system is still operating, perform the procedure “Shutting down the BSG8ew/12ew/
Obtain an ADSL WAN Replacement Module (NT5S21ZCE6) for the BSG12aw from
Nortel.
Ensure you have the following items available:
— an antistatic wrist grounding strap
— a Phillips screwdriver
— grounding source
Caution: Risk of equipment damage
You must wear an antistatic grounding strap at all times when handling
electronic components. Failure to do so can result in damage to the equipment.
Saving the running configuration to Flash using the WebUI
Use this procedure to save the running configuration using the WebUI.
Procedure steps
Step Action
1
2
From the BSG12aw logon page, log on using the user ID and password.
From the left-hand navigation panel, select Administration, Configuration
File, Save.
3
Click Apply.
End
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
56
ADSL WAN module replacement
Variable definitions
Use the data in the following table to use the fields in the logon page.
Variable
Value
User Name
Specify the user name. The
default logon name is
nnadmin.
Password
Specify the password. The
default password is
PlsChgMe!.
Saving the running configuration to Flash using the CLI
Use this procedure to save the running configuration using the CLI.
Procedure steps
Step Action
1
2
3
Launch an SSH session.
Log on to the BSG12aw using the user ID and password.
At the prompt, enter the following command:
write startup-config
End
Variable definitions
Use the data in the following table to use the fields in the logon page.
Variable
Value
User Name
Specify the user name. The
default logon name is
nnadmin.
Password
Specify the password. The
default password is
PlsChgMe!.
Replacing the ADSL WAN module
Use this procedure to replace the ADSLWAN module in the BSG12aw.
Procedure steps
Step Action
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
ADSL WAN module replacement 57
1
Use a Phillips screwdriver to remove the screws on either side of the ADSL WAN
module. You will feel the screws disengage when you have sufficiently loosened
them.
2
3
Gently remove the ADSL WAN module from the faceplate.
Slide the BSG12aw ADSL WAN Replacement Module (NT5S21ZCE6) into the
ADSL WAN module slot.
4
5
Use a Phillips screwdriver to retighten the screws on either side of the ADSL
WAN module. Do not overtighten the screws.
Power up the BSG12aw unit.
End
Verifying the ADSL WAN module status
Use this procedure to verify the correct installation of the ADSLWAN module.
Procedure steps
Step Action
1
2
3
Launch an SSH session.
Log on to the BSG12aw using the user ID and password.
At the prompt, enter the following command:
show sub-system information dsl
View the status.
4
The system displays the following information if you installed the unit properly:
DSL Info:
IpAddress: 169.254.1.6
OperStatus: UP
Firmware Version: <firmware version>
The system displays the following information if you did not install the unit
properly:
DSL Info:
IpAddress: 169.254.1.6
OperStatus: DOWN
Firmware Version: <firmware version>
If the unit was previously configured, attempt to connect with the previous
settings. If not previously configured, or if you cannot connect with your PC or
laptop, navigate to the Quick Start Wizard and follow the wizard instructions on
the GUI to reconfigure your settings.
End
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
58
ADSL WAN module replacement
Variable definitions
Use the data in the following table to use the fields in the logon page.
Variable
Value
User Name
Specify the user name. The
default logon name is
nnadmin.
Password
Specify the password. The
default password is
PlsChgMe!.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
59
WiFi module replacement
The following sections describe how to replace the WiFi module in a Business Services Gateway
12-port (BSG12ew/aw/tw).
WiFi module replacement navigation
•
•
•
•
Prerequisites to WiFi module replacement
•
Obtain a WiFi Replacement Module (NT5S21ZAE6) for the BSG12ew/aw/tw from
Nortel.
•
Ensure you have the following items available:
— an antistatic wrist grounding strap
— a Phillips screwdriver
— grounding source
Caution: Risk of equipment damage
You must wear an antistatic grounding strap at all times when handling
electronic components. Failure to do so can result in damage to the equipment.
Saving the running configuration to Flash using the WebUI
Use this procedure to save the running configuration using the WebUI.
Procedure steps
Step Action
1
2
From the BSG12ew/aw/tw logon page, log on using the user ID and password.
From the left-hand navigation panel, select Administration, Configuration
File, Save.
3
Click Apply.
End
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
60
WiFi module replacement
Variable definitions
Use the data in the following table to use the fields in the logon page.
Variable
Value
User Name
Specify the user name. The
default logon name is
nnadmin.
Password
Specify the password. The
default password is
PlsChgMe!.
Saving the running configuration to Flash using the CLI
Use this procedure to save the running configuration using the CLI.
Procedure steps
Step Action
1
2
3
Launch an SSH session.
Log on to the BSG12ew/aw/tw using the user ID and password.
At the prompt, enter the following command:
write startup-config
End
Variable definitions
Use the data in the following table to use the fields in the logon page.
Variable
Value
User Name
Specify the user name. The
default logon name is
nnadmin.
Password
Specify the password. The
default password is
PlsChgMe!.
Replacing the WiFi module
Use this procedure to replace the WiFi module in the BSG12ew/aw/tw.
Prerequisites
•
If the system is still operating, perform the procedure “Shutting down the BSG8ew/12ew/
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
WiFi module replacement 61
Procedure steps
Step Action
1
2
Unscrew and remove the two antennas.
Use a Phillips screwdriver to remove the screws on either side of the WiFi
module. You will feel the screws disengage when you have sufficiently loosened
them.
3
4
Gently remove the WiFi module from the faceplate.
Slide the BSG12ew/aw/tw WiFi Replacement Module (NT5S21ZAE6) into the
WiFi module slot.
5
Use a Phillips screwdriver to retighten the screws on either side of the WiFi
module. Do not overtighten the screws.
6
7
Screw the two antennas back onto the unit.
Power up the BSG12ew/aw/tw unit.
End
Verifying the WiFi installation
Use this procedure to verify the installation of the WiFi module in the BSG12ew/aw/tw.
Procedure steps
Step Action
1
2
3
Launch an SSH session.
Log on to the BSG12ew/aw/tw using the user ID and password.
At the prompt, enter the following command:
show sub-system information wifi
Verify the status.
4
The system displays the following status if you installed the unit properly:
WiFi Info:
IpAddress: 169.254.1.3
OperStatus: UP
Firmware Version: <firmware version>
The system displays the following status if you did not install the unit properly:
WiFi Info:
IpAddress: 169.254.1.3
OperStatus: DOWN
Firmware Version: <firmware version>
5
Verify that your wireless-capable PC or laptop can connect with the broadcast
SSID and enable network connectivity.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
62
WiFi module replacement
If the unit was previously configured, attempt to connect with the previous
settings. If not previously configured, or if you cannot connect with your PC or
laptop, navigate to the Quick Start Wizard and follow the wizard instructions on
the GUI to reconfigure your settings.
End
Variable definitions
Use the data in the following table to use the fields in the logon page.
Variable
Value
User Name
Specify the user name. The
default logon name is
nnadmin.
Password
Specify the password. The
default password is
PlsChgMe!.
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Basic procedures
The following sections describe basic procedures that you use to prepare the Business Services
Gateway 8-port (BSG8ew) and Business Services Gateway 12-port (BSG12ew/aw/tw) for
maintenance and restarting the BSG8ew or BSG12ew/aw/tw after maintenance.
Basic procedures navigation
•
•
•
•
•
•
•
Shutting down the BSG8ew/12ew/aw/tw
Use this procedure to shut down the BSG8ew/12ew/aw/tw. For procedures on how to use the
BSG8ew/12ew/aw/tw Web User Interface (UI), see Administration (NN47928-600).
Procedure steps
Step Action
1
Use the Web UI to check for a recent backup of the BSG8ew/12ew/aw/tw
system programming before powering down the BSG.
2
Unplug the unit.
End
Restarting the BSG8ew/12ew/aw/tw
Use this procedure to restart the BSG8ew/12ew/aw/tw.
Procedure steps
Step Action
1
Connect power to the BSG8ew/12ew/aw/tw. For more information, see
2
If the most recent configuration is not restored after powering up and logging in
to the unit, then check for most recent backup.
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Basic procedures
End
Removing a rack-mounted BSG8ew/12ew/aw/tw
Use this procedure to remove a rack-mounted BSG8ew/12ew/aw/tw.
Procedure steps
Step Action
1
2
Remove all of the cables from the unit.
If the unit is mounted on top of another unit, slide that unit forward until it
disengages from the clips on the lower unit. Lift the unit off of the top of the other
unit.
3
If the unit is secured to the rack-mount shelf with screws, remove these screws
from the bottom of the rack-mount shelf.
4
5
Slide the unit forward until it disengages from the clips on the rack-mount shelf.
Lift the unit off of the rack-mount shelf and set it on a flat, clean, static-free
surface.
End
Removing a wall-mounted BSG8ew
Use this procedure to remove a wall-mounted BSG8ew.
Procedure steps
Step Action
1
Remove all of the cables from the unit.
Lift the unit until it disengages from the clips on the wall-mount bracket.
Pull the unit out and away from the wall-mount bracket.
Set the unit on a flat, clean, static-free surface.
End
2
3
4
Removing a desktop-mounted BSG8ew/12ew/aw/tw
Use this procedure to remove a desktop-mounted BSG8ew/12ew/aw/tw.
Procedure steps
Step Action
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic procedures 65
1
2
Remove all of the cables from the unit.
If a unit is mounted to the top of another unit, slide that unit forward until it
disengages from the clips on the lower unit. Lift the unit off of the top of the lower
unit.
3
4
Lift the unit off of the table.
Set the unit on a flat, clean, static-free surface.
End
Disconnecting the cables
Use this procedure to disconnect the cables from a BSG8ew/12ew/aw/tw.
Procedure steps
Step Action
1
2
3
4
Remove the FXO RJ-11 connection.
Remove the FE connections from the LAN ports.
Remove the WAN connection from the WAN ports.
While disconnecting a BSG8ew, rotate the power supply retention clip to free the
power supply cord.
5
Remove the power supply cord from the unit.
Caution: Risk of leakage currents
You must disconnect the telephony and data networking cables from the system
before disconnecting the power cord from a grounded outlet.
End
Connecting the cables
Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
66
Basic procedures
NN47928-302
Download from Www.Somanuals.com. All Manuals Search And Download.
|