Nokia Range 9362065 User Manual

User’s Guide

9362065

Issue 1 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and

improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to

you.

9362065

Issue 1 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

For your safety ....................................................................................................14

1. General information........................................................................................17

Standby mode.............................................................................................................................................17

Indicators related to actions...............................................................................................................18

Data connection indicators.................................................................................................................19

Menu.............................................................................................................................................................20

Rearranging the Menu..........................................................................................................................21

Switching between applications........................................................................................................22

Options lists ................................................................................................................................................22

Help ...............................................................................................................................................................22

Navigation bar - moving horizontally.................................................................................................23

Actions common to all applications ....................................................................................................23

Searching for items ...............................................................................................................................25

Volume control...........................................................................................................................................25

Loudspeaker.............................................................................................................................................26

Activating the loudspeaker..............................................................................................................26

Turning off the loudspeaker ............................................................................................................27

Headset mode .........................................................................................................................................27

Keyguard ......................................................................................................................................................27

Shared memory..........................................................................................................................................27

2. Your phone.......................................................................................................28

Making a call ..............................................................................................................................................28

Making a call using the Contacts directory ...................................................................................29

Calling your voice mailbox..................................................................................................................29

Changing the voice mailbox number............................................................................................29

Download from Www.Somanuals.com. All Manuals Search And Download.

Speed dialling a phone number.........................................................................................................30

Making a conference call ....................................................................................................................30

Answering a call ........................................................................................................................................31

Options during a call.............................................................................................................................31

Call waiting (network service)............................................................................................................32

Settings for call diverting....................................................................................................................33

Log - Call register and general log.......................................................................................................33

Recent calls register..............................................................................................................................34

Call duration............................................................................................................................................35

GPRS data counter.................................................................................................................................36

Viewing the general log.......................................................................................................................36

3. Personal information.......................................................................................38

Contacts.......................................................................................................................................................38

Creating contact cards.........................................................................................................................38

Copying contacts between the SIM card and phone memory..................................................39

Editing contact cards............................................................................................................................39

Inserting an image in a contact card............................................................................................39

Viewing a contact card ........................................................................................................................40

Assigning default numbers and addresses ..................................................................................40

Voice dialling .......................................................................................................................................41

Assigning speed dialling keys..........................................................................................................43

Adding a ringing tone for a contact card or group ..................................................................44

Managing contact groups ...................................................................................................................44

Creating contact groups...................................................................................................................45

Adding members to a group............................................................................................................45

Calendar.......................................................................................................................................................45

Creating calendar entries ....................................................................................................................46

Editing calendar entries....................................................................................................................46

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting calendar entries .................................................................................................................47

Calendar entry fields..........................................................................................................................47

Calendar views ....................................................................................................................................48

Setting calendar alarms.......................................................................................................................50

To-do.............................................................................................................................................................51

Importing data from compatible Nokia phones ...............................................................................52

4. Multimedia.......................................................................................................53

Camera..........................................................................................................................................................53

Taking pictures........................................................................................................................................53

Self-timer..............................................................................................................................................54

Settings .................................................................................................................................................55

Camera mode affects image size and orientation ....................................................................55

Images and memory consumption ................................................................................................57

Viewing images..........................................................................................................................................58

Zooming on a saved image .................................................................................................................59

Keyboard shortcuts................................................................................................................................59

Video recorder ............................................................................................................................................60

Recording a video clip ..........................................................................................................................60

Setting up your Video recorder..........................................................................................................61

RealOne Player™ ........................................................................................................................................61

Playing media files.................................................................................................................................62

Shortcuts during play........................................................................................................................63

Changing the settings...........................................................................................................................64

Gallery...........................................................................................................................................................64

Opening files............................................................................................................................................65

Other default folders.............................................................................................................................66

Picture messages folder....................................................................................................................66

Wallpapers folder ...............................................................................................................................66

Download from Www.Somanuals.com. All Manuals Search And Download.

Downloading files..................................................................................................................................66

Uploading images to an image server (network service)............................................................67

Set up the image server....................................................................................................................67

5. Messaging........................................................................................................68

Messaging - General information.........................................................................................................70

Opening a received message...............................................................................................................70

Adding a recipient to a message.......................................................................................................70

Sending options......................................................................................................................................71

Writing text.................................................................................................................................................71

Using traditional text input ................................................................................................................71

Using predictive text input..................................................................................................................73

Tips on using predictive text input................................................................................................74

Copying text............................................................................................................................................75

Editing options........................................................................................................................................76

Creating and sending new messages...................................................................................................77

Writing and sending text messages..................................................................................................77

Creating and sending picture messages ......................................................................................78

Multimedia messages ...........................................................................................................................79

Settings needed for multimedia messaging................................................................................79

Creating multimedia messages.......................................................................................................80

Removing an object from a multimedia message.....................................................................81

Working with different media objects..........................................................................................82

E-mail........................................................................................................................................................82

Settings needed for e-mail..............................................................................................................82

Writing and sending e-mail messages .........................................................................................82

Inbox - receiving messages ....................................................................................................................84

Options in different message viewers..............................................................................................84

Viewing multimedia messages in Inbox..........................................................................................85

Download from Www.Somanuals.com. All Manuals Search And Download.

Multimedia message objects...........................................................................................................85

Sounds in a multimedia message ..................................................................................................86

Viewing a multimedia presentation..................................................................................................86

Receiving smart messages...................................................................................................................87

Service messages (network service)..................................................................................................88

Viewing service messages in Inbox ...............................................................................................88

Viewing service messages in the browser ...................................................................................89

My folders ...................................................................................................................................................89

Remote mailbox (network service).......................................................................................................89

Opening the mailbox.............................................................................................................................90

Viewing e-mail messages when online........................................................................................90

Viewing e-mail messages when offline .......................................................................................91

Retrieving e-mail messages from the mailbox..............................................................................91

Opening e-mail messages....................................................................................................................93

Disconnecting from mailbox...............................................................................................................93

Viewing e-mail attachments ..............................................................................................................93

Saving attachments separately ......................................................................................................94

Deleting e-mail messages....................................................................................................................95

Undeleting e-mail messages when offline..................................................................................95

Outbox..........................................................................................................................................................96

Viewing messages on a SIM card..........................................................................................................96

Cell broadcast (network service)...........................................................................................................97

Service command editor..........................................................................................................................97

Messaging settings ...................................................................................................................................98

Settings for text messages..................................................................................................................98

Settings for multimedia messages....................................................................................................99

Settings for e-mail.............................................................................................................................. 101

Settings for Mailboxes................................................................................................................... 101

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings for service messages.......................................................................................................... 103

Settings for Cell broadcast............................................................................................................... 104

Settings for the Other folder ........................................................................................................... 104

6. Tools .............................................................................................................. 105

Settings ..................................................................................................................................................... 105

Changing general settings................................................................................................................ 105

Phone settings ..................................................................................................................................... 105

Call settings.......................................................................................................................................... 107

Connection settings ........................................................................................................................... 109

General information about data connections and access points...................................... 109

Creating an access point............................................................................................................... 111

Access points .................................................................................................................................... 112

GPRS.................................................................................................................................................... 115

Data call............................................................................................................................................. 116

Date and time ...................................................................................................................................... 116

Security.................................................................................................................................................. 117

Phone and SIM................................................................................................................................. 117

Certif. management........................................................................................................................ 120

Call barring (network service) ......................................................................................................... 121

Network ................................................................................................................................................. 122

Enhancement settings....................................................................................................................... 123

File manager ............................................................................................................................................ 124

Finding files .......................................................................................................................................... 124

Receiving files via Infrared............................................................................................................... 124

Viewing memory consumption........................................................................................................ 125

Voice commands..................................................................................................................................... 125

Adding a voice command to an application................................................................................ 127

Adding an application to the list................................................................................................ 127

Download from Www.Somanuals.com. All Manuals Search And Download.

Starting an application using a voice command ....................................................................... 128

Replaying, erasing, or changing a voice command................................................................... 128

7. Personalisation.............................................................................................. 129

Profiles....................................................................................................................................................... 129

Changing the profile .......................................................................................................................... 129

Customising profiles........................................................................................................................... 130

Themes....................................................................................................................................................... 131

Editing themes..................................................................................................................................... 132

Restoring themes............................................................................................................................. 133

Go to........................................................................................................................................................... 133

Adding shortcuts................................................................................................................................. 134

8. Extras............................................................................................................. 135

Wallet ....................................................................................................................................................... 135

Entering the wallet code................................................................................................................... 136

Storing personal card details........................................................................................................... 136

Creating personal notes.................................................................................................................... 137

Creating a wallet profile................................................................................................................... 138

Retrieving information from wallet to your browser ............................................................... 139

Viewing ticket details ........................................................................................................................ 139

Wallet settings..................................................................................................................................... 140

Resetting the wallet and wallet code........................................................................................... 140

Calculator ................................................................................................................................................. 140

Converter .................................................................................................................................................. 141

Converting units.................................................................................................................................. 141

Setting a base currency and exchange rates.............................................................................. 142

Notes.......................................................................................................................................................... 143

Clock........................................................................................................................................................... 143

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing clock settings.................................................................................................................... 143

Setting an alarm.................................................................................................................................. 144

Personalising the alarm tone ....................................................................................................... 144

Recorder.................................................................................................................................................... 145

Games ........................................................................................................................................................ 145

Memory card............................................................................................................................................ 145

Format memory card.......................................................................................................................... 146

Backing up and restoring information.......................................................................................... 146

Memory card password..................................................................................................................... 147

Unlocking a memory card ............................................................................................................. 147

Checking memory consumption ..................................................................................................... 148

9. Services and Applications............................................................................ 149

Services (Mobile browser).................................................................................................................... 149

Basic steps for accessing .................................................................................................................. 149

Setting up the phone for the browser service............................................................................ 150

Receiving settings in a smart message ..................................................................................... 150

Keying in the settings manually.................................................................................................. 150

Making a connection......................................................................................................................... 151

Viewing bookmarks............................................................................................................................. 151

Adding bookmarks manually........................................................................................................ 152

Browsing................................................................................................................................................ 153

Keys and commands used in browsing...................................................................................... 153

Saving bookmarks............................................................................................................................ 154

Viewing saved pages....................................................................................................................... 154

Downloading ........................................................................................................................................ 155

Purchasing an item......................................................................................................................... 155

Checking an item before downloading ..................................................................................... 157

Ending a connection .......................................................................................................................... 157

Download from Www.Somanuals.com. All Manuals Search And Download.

Browser settings.................................................................................................................................. 157

Application manager ............................................................................................................................. 159

Installing applications - general information............................................................................. 160

Installing applications.................................................................................................................... 161

Installing Java™................................................................................................................................ 161

Removing an application.................................................................................................................. 162

10.Connectivity ................................................................................................ 163

Bluetooth connection............................................................................................................................ 163

Activating Bluetooth application for the first time.................................................................. 164

Bluetooth settings .............................................................................................................................. 165

Sending data via Bluetooth ............................................................................................................. 165

Paired devices view ............................................................................................................................ 168

Pairing with a device...................................................................................................................... 168

Cancelling pairing............................................................................................................................ 168

Setting a device to be authorised or unauthorised ............................................................... 169

Receiving data via Bluetooth .......................................................................................................... 169

Closing the Bluetooth connection ................................................................................................. 169

Infrared connection ............................................................................................................................... 170

Sending and receiving data via infrared ...................................................................................... 170

Connection manager ............................................................................................................................. 171

Viewing connection details.............................................................................................................. 172

Ending connections............................................................................................................................ 173

Connecting your phone to a compatible computer...................................................................... 173

Using the CD-ROM............................................................................................................................. 173

Using your phone as a modem........................................................................................................ 174

Sync - remote synchronisation........................................................................................................... 174

Creating a new synchronisation profile........................................................................................ 175

Synchronising data............................................................................................................................. 176

Download from Www.Somanuals.com. All Manuals Search And Download.

11.Troubleshooting .......................................................................................... 177

Q&A............................................................................................................................................................ 178

12.Battery information.................................................................................... 183

Charging and Discharging.................................................................................................................... 183

Care and maintenance ..................................................................................... 185

Important safety information.......................................................................... 186

Index.................................................................................................................. 192

Download from Www.Somanuals.com. All Manuals Search And Download.

For your safety

Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further

detailed information is given in this manual.

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Don't use a hand-held phone while driving.

INTERFERENCE

All wireless phones may get interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Don't use the phone where blasting is in progress. Observe restrictions, and

follow any regulations or rules.

USE SENSIBLY

Use only in the normal position. Don't touch the antenna unnecessarily.

Download from Www.Somanuals.com. All Manuals Search And Download.

QUALIFIED SERVICE

Only qualified personnel may install or repair phone equipment.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACKUP COPIES

Remember to make backup copies of all important data.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user's guide for detailed safety

instructions. Do not connect incompatible products.

CALLING

Ensure the phone is switched on and in service. Enter the phone number,

including the area code, then press . To end a call, press . To answer a call,

press

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as

needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the

emergency number, then press . Give your location. Do not end the call until

told to do so.

When using the features in this device, obey all laws and honour privacy and legitimate

rights of others.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Network services

The wireless phone described in this guide is approved for use on the EGSM 900 and GSM

1800 and 1900 networks.

A number of features included in this guide are called network services. These are special

services that you arrange through your wireless service provider. Before you can take

advantage of any of these network services, you must subscribe to them through your

service provider and obtain instructions for their use from your service provider.

This phone supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some

features of this phone, such as MMS, browsing, e-mail, remote SyncML, and content

downloading via browser or over MMS, require network support for these technologies.

Note: Some networks may not support all language-dependent characters and/or

services.

■ Chargers and enhancements

WARNING! Use only batteries, chargers and enhancements approved by the phone

manufacturer for use with this particular phone model. The use of any other types may

invalidate any approval or warranty applying to the phone, and may be dangerous.

Note: Check the model number of any charger before use with this device. This

device is intended for use when supplied with power from ACP-12 and LCH-12.

For availability of approved enhancements, please check with your dealer.

When you disconnect the power cord of any enhancement, grasp and pull the plug, not the

cord.

Download from Www.Somanuals.com. All Manuals Search And Download.

1. General information

Your Nokia 6600 provides various functions that are handy for daily use, such as

Camera, Video recorder, Messaging, E-mail, Wallet, Clock, Calculator, and

Calendar.

WARNING! All of the features in this device, other than the alarm clock require the

phone to be switched on to use the features. Do not switch the device on when wireless

phone use may cause interference or danger.

Stickers in the sales package

• The stickers included on the warranty card, in the sales package, contain

important information for service and customer support purposes. The sales

package also includes instructions on how you should use these stickers.

■ Standby mode

The indicators described below are shown when the phone is ready for use, with

no characters keyed in. In this state, the phone is in ‘standby mode’.

A Shows the signal strength of the cellular network at your current location. The

higher the bar, the stronger the signal. The antenna symbol

is replaced with

the GPRS symbol when GPRS connection has been set to When available and a

connection is available in the network or in the current cell. See ‘Packet data

(General Packet Radio Service, GPRS)’, p. 110.See ‘GPRS’, p. 115.

Download from Www.Somanuals.com. All Manuals Search And Download.

B Shows an analogue or a digital clock. See ‘Date and

time’, p. 116.

C Indicates in which cellular network the phone is

currently being used.

D Shows the battery charge level. The higher the bar,

the more power left in the battery.

E Navigation bar: shows the currently active profile. If

the selected profile is General, the current date is

displayed instead of the profile name. See ‘Navigation

bar - moving horizontally’, p. 23.

F Shows the current shortcuts assigned for the selection keys

and

G Background image: You can select any image to be used as a background image

in standby mode. See ‘Themes’, p. 131.

Note: Your phone has a screen saver. If there are no actions for one minute,

the display is cleared and a screen saver becomes visible. To deactivate the screen

saver, press any key.See ‘Themes’, p. 131.

Indicators related to actions

One or more of the following icons may be shown when the phone is in standby

mode:

- Indicates that you have received new messages to the Inbox in Messaging.

If the indicator is blinking, the phone memory is low and you must delete some

data. See ‘Memory low’, p. 177.

Download from Www.Somanuals.com. All Manuals Search And Download.

- Indicates that you have received new e-mail.

- Indicates that you have received one or several voice messages. See

‘Calling your voice mailbox’, p. 29.

- Indicates that there are messages waiting to be sent in Outbox. See

‘Messaging - General information’, p. 70.

- Shown when Ringing type has been set to Silent, Message alert tone to Off,

and Chat alert tone to Off in the currently active profile.

- Indicates that the phone’s keypad is locked. See the Getting Started guide.

- Indicates that you have an active alarm.

- Indicates that Bluetooth is active. When data is transmitted via Bluetooth,

is shown.

- Indicates that all calls to the phone are diverted.

calls to the phone are diverted to a voice mailbox. See ‘Settings for call diverting’,

p. 33. If you have two phone lines, the divert indicator for the first line is and

for the second line . See ‘Line in use (network service)’, p. 108.

- Indicates that all

- Indicates that you can make calls using phone line 2 only (network service).

See ‘Line in use (network service)’, p. 108.

Data connection indicators

• When an application is establishing a data connection, one of the indicators

below blinks in standby mode.

• When an indicator is shown continuously, the connection is active.

Download from Www.Somanuals.com. All Manuals Search And Download.

for a data call,

for a high speed data call,

The GPRS symbol is shown instead of the antenna symbol

when there is an

active GPRS connection, when there are multiple GPRS connections, and for

when the GPRS connection is put on hold during voice calls.

for a fax call,

for a Bluetooth connection, and

for an infrared connection.

■ Menu

• Press (Menu key) to display the main Menu. In the Menu, you can

access all the applications in your phone.

Options in the Menu: Open, List view / Grid view, Move, Move to folder,

New folder, App. downloads, Memory details, Help and Exit.

Moving in the Menu

• Move the joystick up

, down

, left

and

right (shown with blue arrows 1 to 4) to

navigate the Menu.

Opening applications or folders

• Scroll to an application or a folder and press the

centre of the joystick

5) to open it.

(shown with blue arrow

Download from Www.Somanuals.com. All Manuals Search And Download.

Closing applications

• Backstep by pressing Back or Exit as many times as needed to return to

standby mode or select Options→ Exit.

If you press and hold , the phone returns to standby mode and the application is

left open in the background.

Note: Pressing will always end a call, even if another application is active

and displayed.

When you switch the phone off correctly, using the Power key, the phone will

attempt to save any unsaved data and close any applications that are still open.

Hence the process may take a short time.

Rearranging the Menu

You can rearrange the Menu icons as required. You can place more rarely used

applications in folders and move applications that you use more often from a

folder to the main Menu. You can also create new folders.

1. Scroll to the item you want to move and select Options→ Move. A check mark

is placed beside the application.

2. Move the selection where you want the application to be and press OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

Switching between applications

If you have several applications open and want to

switch from one application to another, press and hold

(Menu key). The application switching window

opens showing a list of applications that are currently

open. Scroll to an application and press

to go to it.

Note: If memory is getting low, the phone may

close some applications. The phone saves any unsaved

data before an application is closed.

■ Options lists

Options: These lists tell you which commands are available in different

views and situations.

Note: The available commands change depending on the view you are in.

■ Help

Your Nokia phone has a help function that you can access from any

application that has the Options selection, and can be accessed using

the

key. You can also access the help function from the main menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Navigation bar - moving horizontally

In the navigation bar, you can see:

• small arrows or tabs that tell you if there are more

views, folders, or files you can move to.

• editing indicators. See ‘Writing text’, p. 71.

• other information, for example, 2/14 means that the current picture is the

second of 14 pictures in the folder. Press

to see the next picture.

■ Actions common to all applications

• Opening items for viewing - When you are viewing a list of files or folders, to

open an item, scroll to an item and press

, or select Options→ Open.

• Editing items - To open an item for editing, you sometimes need to first open

it for viewing and then select Options→ Edit, if you want to change its

contents. Use the joystick to scroll through all fields of the item.

• Renaming items - To give a new name to a file or folder, scroll to it and select

Options→ Rename.

• Removing, deleting items - Scroll to the item and select Options→ Delete or

press

. To delete many items at a time, you first need to mark them. See the

next paragraph: ‘Marking an item’.

• Marking an item - There are several ways to select items when you are in a list.

Download from Www.Somanuals.com. All Manuals Search And Download.

• To select one item at a time, scroll to it and select Options→ Mark/

Unmark→ Mark or press

placed next to the item.

and

at the same time. A check mark is

• To select all items in the list, select Options→ Mark/Unmark→ Mark all.

• Marking multiple items - Press and hold , then move the joystick down

or up. As the selection moves, a check mark is placed next to the items. To

end the selection, stop the scrolling with the joystick and then release

After you have selected all the items you want, you can move or delete

them by selecting Options→ Move to folder or Delete.

• To unmark an item, scroll to it and select Options→ Mark/Unmark→ Unmark

or press

and

at the same time.

• Creating folders - To create a new folder, select Options→ New folder. You

are asked to give a name to the folder (max. 35 letters).

• Moving items to a folder - To move items to a folder or between folders,

select Options→ Move to folder (not shown if there are no folders available).

When you select Move to folder, a list of available folders opens and you can

also see the root level of the application (for moving an item out of a folder).

Select the location you want the item to be moved to and press OK.

• Sending items - To send items, to compatible devices, scroll to the item that

you want to send, select Options→ Send. Select the method, the choices are

Via multimedia, Via Bluetooth, Via infrared, and Via e-mail.

• If you select to send the item in an e-mail or a multimedia message, an

editor opens. Press

to select the recipient(s) from the Contacts

Download from Www.Somanuals.com. All Manuals Search And Download.

directory or write the phone number or e-mail address of the recipient in

the To: field. Add text or sound and select Options→ Send. See ‘Creating

and sending new messages’, p. 77.

• Via infrared. See ‘Sending and receiving data via infrared’, p. 170.

• Via Bluetooth. See ‘Sending data via Bluetooth’, p. 165.

Searching for items

You can search for a name, file, folder, or shortcut by using the search

field. In some situations the search field is not visible automatically, but

you can activate it by selecting Options→ Find or just by starting to key in letters.

1. To search for an item, start to key in text in the

search field. The phone immediately starts to

search for matches and moves the selection to the

best match.

To make the search more accurate, key in more

letters and the selection moves to the item that

best matches the letters.

2. When the correct item is found, press

it.

to open

■ Volume control

• When you have an active call or are listening to a sound, press

increase or decrease the volume level, respectively.

Download from Www.Somanuals.com. All Manuals Search And Download.

Voice volume icons:

- for earpiece mode,

- for loudspeaker mode.

Loudspeaker

Your phone has a loudspeaker for handsfree use. The loudspeaker allows you to

speak and listen to the phone from a short distance without having to hold the

phone to your ear, for example, having it on a table nearby. The loudspeaker can

be used during a call, with sound and video applications, and when viewing

multimedia messages. Sound and video applications use the loudspeaker by

default. Using the loudspeaker makes it easier to use other applications while in a

call.

Activating the loudspeaker

To change to using the loudspeaker during an already active

call, select Options→ Activate loudsp.. A tone is played,

shown in the navigation bar, and the volume indicator changes.

Note: The loudspeaker cannot be activated when you have connected a

headset to the phone.

Important: Do not hold the phone near to your ear when the loudspeaker is

in use, because the volume may be extremely loud.

The loudspeaker needs to be activated separately each time for phone calls, but

the sound applications, such as Recorder, use the loudspeaker by default.

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning off the loudspeaker

• When you have an active call, select Options→ Activate handset.

Headset mode

To adjust the volume level when a headset is connected to your phone, press

or use the headset’s keys, if available.

■ Keyguard

Use the keyguard (keypad lock) to help prevent accidental key presses.

In standby mode, press

appears on the display. Press

and then

. When the keys are locked,

to unlock the keys.

and then

When keyguard is on, press to answer a call. During a call, the phone can be

operated in the normal way.

Note: When keyguard is on, calls may be possible to the emergency number

programmed into your phone (e.g. 112 or other official emergency number). Just key in the

emergency number and press . The number is displayed only after you have keyed in its last

digit.

■ Shared memory

The following features in your phone use shared memory: contacts, text messages, and

multimedia messages, images and ringing tones, Video recorder, RealOne Player^TM, calendar

and to-do notes, and downloaded applications. Using any of these features leaves less

memory for other features. This is especially true with heavy use of any of the features. For

example, saving many images may take all of the shared memory and your phone may

display that the memory is full. In this case, delete some of the information or entries

reserving the shared memory.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Your phone

■ Making a call

1. In standby mode, key in the phone number,

including the area code. Press

to move

the cursor. Press

to remove a number.

• For international calls, press

twice for the

international prefix (the + character replaces

the international access code) and then key in

the country code, the area code without 0, and

the phone number.

Note: Calls described here as

international may in some cases be made

between regions of the same nation.

2. Press to call the number.

3. Press to end the call (or to cancel the call attempt).

Note: Pressing will always end a call, even if another application is active

and displayed.

You can make a call using your voice so that you do not need to look at the display

to key in the number. See ‘Voice dialling’, p. 41.

Download from Www.Somanuals.com. All Manuals Search And Download.

Making a call using the Contacts directory

1. To open the Contacts directory, go to Menu→ Contacts.

2. To find a contact, scroll to the desired name, or key in the first letters of the

name. The Search field opens automatically and matching contacts are listed.

3. Press to start the call.

If the contact has more than one phone number, scroll to the number and press

to start the call.

Calling your voice mailbox

The voice mailbox (network service) is an answering service where callers who are

unable to reach you can leave you voice messages.

• To call your voice mailbox, press

and in standby mode.

• If the phone asks for the voice mailbox number, key it in and press OK. You can

obtain this number from your service provider.

See ‘Settings for call diverting’, p. 33.

Each phone line may have its own voice mailbox number. See ‘Line in use (network

service)’, p. 108.

Changing the voice mailbox number

To change the phone number of your voice mailbox, go to Menu→ Tools→ Voice

mailbox and select Options→ Change number. Key in the number (obtained from

your service provider) and press OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speed dialling a phone number

To view the speed dialling grid, go to Menu→ Tools→ Speed dial.

1. Assign a phone number to one of the speed dialling keys (

‘Assigning speed dialling keys’, p. 43.

). See

2. To call the number: In standby mode, press the corresponding speed dialling

key and . If the Speed dialling function is set to On: Press and hold the

corresponding speed dialling key until the call is started.

Making a conference call

Conference calling is a network service that allows you

to make a conference call with a maximum of six

participants, including yourself.

1. Make a call to the first participant.

2. To make a call to a new participant, select

Options→ New call. Key in or search the memory

for the phone number of the participant and press

OK. The first call is automatically put on hold.

3. When the new call has been answered, join the first

participant in the conference call. Select

Options→ Conference.

4. To add a new person to the call, repeat step 2 and then select Options→

Conference→ Add to conference.

Download from Www.Somanuals.com. All Manuals Search And Download.

• To have a private conversation with one of the participants: Select

Options→ Conference→ Private. Scroll to the desired participant and press

Private. The conference call is put on hold in your phone, and the other

participants can still continue talking with each other while you have a

private discussion with one participant only. Once you have finished the

private conversation, press Cancel to return to the conference call.

• To drop one participant from the conference call, select Options→

Conference→ Drop participant, then scroll to the participant and press

Drop.

5. To end the active conference call, press

■ Answering a call

• To answer an incoming call, press

• To end the call, press

If you do not want to answer a call, press . The caller

will hear a ’line busy’ tone.

When a call comes in, press Silence to quickly mute

the ringing tone.

Options during a call

Press Options during a call for some of the following

options:

Download from Www.Somanuals.com. All Manuals Search And Download.

Mute or Unmute, End active call, End all calls, Hold or Unhold, New call,

Conference, Private, Drop participant, Answer, and Reject.

Swap is used to switch between the active call and the call on hold.

Transfer is used to connect an incoming call or a call on hold with an active call

and to disconnect yourself from both calls.

Send DTMF is used to send DTMF tone sequences, for example, passwords or bank

account numbers.

Note: You may not have all of these options. Contact your service provider

for more details.

1. Key in the digits with

. Each keystroke generates a DTMF tone,

repeatedly to produce:

which is transmitted while the call is active. Press

*, p (inserts a pause of approximately two seconds before, or between DTMF

characters.), and w (if you use this character, the remaining sequence is not

sent until you press Send again during the call). Press

to produce #.

2. To send the tone, press OK.

Call waiting (network service)

If you have activated the Call waiting service, the network will notify you of a new

incoming call while you have a call in progress.

1. During a call, press to answer the waiting call. The first call is put on hold.

To switch between the two calls, press Swap.

2. To end the active call, press

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings for call diverting

When this network service is activated, you can direct your incoming calls to

another number, for example, to your voice mailbox number. For details, contact

your service provider.

Go to Menu→ Tools→ Settings→ Call divert.

• Select one of the divert options, for example, select If busy to divert voice calls

when your number is busy or when you reject incoming calls.

• Select Options→ Activate to set the divert setting on, Cancel to set the divert

setting off, or Check status to check whether the divert is activated or not.

• To cancel all active diverts, select Options→ Cancel all diverts.

See ‘Indicators related to actions’, p. 18.

Note: You cannot have barring of incoming calls and call diverting active at

the same time. See ‘Call barring (network service)’, p. 121.

■ Log - Call register and general log

Press in standby mode or go to Menu→ Log.

In the log you can monitor phone calls, text messages, packet data

connections, and fax and data calls registered by the phone. You can filter the log

to view just one type of event and create new contact cards based on the log

information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: Connections to your remote mailbox, multimedia messaging centre,

or browser pages are shown as data calls or packet data connections in the

general communications log.

Recent calls register

Go to Menu→ Log→ Recent calls.

The phone registers the phone numbers of missed, received, and dialled calls, and

the approximate duration of your calls. The phone registers missed and received

calls only if the network supports these functions, and the phone is switched on

and within the network’s service area.

Options in the Missed, Received, Dialled views: Call, Create message, Use

number, Delete, Clear list, Add to Contacts, Help, and Exit.

Missed calls and received calls

To view a list of the last 20 phone numbers from which somebody has tried to call

you without success (network service), go to Log→ Recent calls→ Missed calls.

Tip! When you see a note in standby mode about missed calls, press Show

to access the list of missed calls. To call back, scroll to the number or name you

want and press

To view a list of the 20 numbers or names from which you have most recently

accepted calls (network service), go to Log→ Recent calls→ Received calls.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dialled numbers

To view the 20 phone numbers that you have most

recently called or attempted to call, go to Log→

Recent calls→ Dialled nos..

Erasing recent call lists

• To clear all recent call lists, select Options→ Clear

recent calls in the Recent calls main view.

• To clear one of the call registers, open the register

you want to erase and select Options→ Clear list.

• To clear an individual event, open a register, scroll to the event, and press

Call duration

Go to Menu→ Log→ Call duration.

Allows you to view the duration of your incoming and outgoing calls.

Note: The actual time invoiced for calls by your service provider may vary, depending

upon network features, rounding-off for billing, and so forth.

Erasing call duration timers - Select Options→ Clear timers. For this you need

the lock code. See ‘Security’, p. 117.

Download from Www.Somanuals.com. All Manuals Search And Download.

GPRS data counter

Go to Log→ GPRS counter.

The GPRS data counter allows you to check the amount of data sent and received

during packet data (GPRS) connections. For example, you may be charged for your

GPRS connections by the amount of data sent and received.

Viewing the general log

Go to Menu→ Log and press

In the general log, for each communication event, you

can see the sender or recipient name, phone number,

name of the service provider, or access point.

Note: Sub-events, such as a text message sent

in more than one part and packet data connections,

are logged as one communication event.

Filtering the log

1. Select Options→ Filter. A list of filters opens.

2. Scroll to a filter and press Select.

Erasing the contents of the log

• To erase all the log contents, Recent calls register, and Messaging delivery

reports permanently, select Options→ Clear log. Confirm by pressing Yes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Packet data counter and connection timer

• To view how much data, measured in kilobytes, has been transferred and how

long a certain GPRS connection has lasted, scroll to an Incoming or Outgoing

event with the access point icon and select Options→ View details.

Log settings

• Select Options→ Settings. The list of settings opens.

•

Log duration - The log events remain in the phone memory for a set number

of days after which they are automatically erased to free memory.

Note: If you select No log, all the log contents, Recent calls register,

and Messaging delivery reports are permanently deleted.

•

Show call duration. See ‘Call duration’, p. 35.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Personal information

■ Contacts

To open Contacts, press

Contacts.

in standby mode or go to Menu→

In Contacts, you can store and manage contact

information, such as names, phone numbers, and

addresses.

You can also add a personal ringing tone, voice tag, or

a thumbnail image to a contact card. You can create

contact groups, which allow you to send text

messages or e-mail to many recipients at the same

time.

Options in the Contacts directory: Open, Call,

Create message, New contact, Edit, Delete, Duplicate,

Add to group, Belongs to groups, Mark/Unmark, Copy to SIM direct., Go to web

address, Send, Contacts info, SIM directory, Settings, Help, and Exit.

Creating contact cards

1. Open Contacts and select Options→ New contact. An empty contact card

opens.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Fill in the fields you want and press Done. The contact card is saved in the

phone memory and closed, after which you can see it in the Contacts directory.

Copying contacts between the SIM card and phone memory

• To copy names and numbers from a SIM card to your phone, select Options→

SIM directory, scroll to the name(s) you want to copy and select Options→

Copy to Contacts.

• If you want to copy a phone, fax, or pager number from Contacts to your SIM

card, go to Contacts, open a contact card, scroll to the number, and select

Options→ Copy to SIM direct.

Editing contact cards

Options when editing a contact card: Add thumbnail / Remove thumbnail,

Add detail, Delete detail, Edit label, Help, and Exit.

See ‘Actions common to all applications’, p. 23.

Inserting an image in a contact card

To attach a small thumbnail image to a contact card, open a contact card, select

Options→ Edit and then select Options→ Add thumbnail. The thumbnail image is

also shown when the contact is calling you. After you attach a thumbnail image to

a contact card, you can select Add thumbnail to replace the image with a different

thumbnail or Remove thumbnail to remove the thumbnail from the contact card.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing a contact card

The contact information view ( ) shows all

information inserted in the contact card.

The name field is always displayed in the contact

information view, but other fields are only displayed if

they contain information.

Options when viewing a contact card, when the

selection is on a phone number: Call, Create message,

Edit, Delete, Defaults, Add voice tag / Voice tags, Assign

speed dial / Remove speed dial, Ringing tone, Copy to

SIM direct., Send, Help, and Exit.

Assigning default numbers and addresses

If a contact has several phone numbers or e-mail addresses, to speed up calling

and sending messages, you can define certain numbers and addresses to be used

as the default.

• Open a contact card and select Options→ Defaults. A pop-up window opens,

listing the different options.

Example: Scroll to Phone number and press Assign. A list of phone numbers

in the selected contact card is shown. Scroll to the one you want to have as the

default and press

. When you return back to the contact card view, you can see

the default number’s name underlined.

Download from Www.Somanuals.com. All Manuals Search And Download.

Voice dialling

You can make a phone call by saying a voice tag that has been added to a contact

card.

Voice tags

Any spoken word(s) can be a voice tag.

• When recording, hold the phone at a short distance away from your mouth.

After the starting tone, say clearly the word, or words, you want to record as a

voice tag.

Before using voice dialling, note that:

•

Voice tags are not language dependent. They are dependent on the speaker's voice.

Voice tags are sensitive to background noise. Record and use them in a quiet

environment.

•

Very short names are not accepted. Use long names and avoid similarnames for different

numbers.

Note: You must say the name exactly as you said it when you recorded it. This may

be difficult in, for example, a noisy environment or during an emergency, so you should not

rely solely upon voice dialling in all circumstances.

Adding a voice tag to a phone number

Note: Voice tags can only be added to phone numbers stored in the phone’s

memory. See ‘Copying contacts between the SIM card and phone memory’, p. 39.

1. In the Contacts main view, scroll to the contact that you want to add a voice

tag to, and press

to open the contact card.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Scroll to the number that you want to add the voice tag to, and select

Options→ Add voice tag.

3. The text Press ’Start’, then speak after tone is displayed.

• Press Start to record a voice tag. The phone sounds a starting tone and the

note Speak now is displayed.

4. Say the voice tag. The phone will stop recording after approximately 5 seconds.

5. After recording, the phone plays the recorded tag and the note Playing voice

tag is displayed.

6. When the voice tag has been successfully saved, the note Voice tag saved is

displayed and a beep sounds. A symbol can be seen next to the number in

the contact card.

Making a call using a voice tag

1. In standby mode, press and hold

. A short tone is played and the note

Speak now is displayed.

2. When you are making a call by saying a voice tag, hold the phone at a short

distance away from your mouth and face and say the voice tag clearly.

3. The phone plays the original voice tag, displays the name and number, and

after a few seconds dials the number of the recognised voice tag.

• If the phone plays the wrong voice tag, or to retry voice dialling, press Retry.

Note: When an application using a data call or GPRS connection is sending

or receiving data, you cannot make a call by using voice dialling. To make a call by

using a voice tag, end all active data connections.

Download from Www.Somanuals.com. All Manuals Search And Download.

Replaying, erasing, or changing a voice tag

To replay, erase, or change a voice tag, scroll to the item that has a voice tag

(indicated by ), select Options→ Voice tag, and then either:

•

Playback - to listen to the voice tag again, or

Delete - to erase the voice tag, or

Change - to record a new voice tag. Press Start to record.

Assigning speed dialling keys

Speed dialling is a quick way to call frequently used

numbers. You can assign speed dialling keys to eight

phone numbers. Number 1 is reserved for the voice

mailbox.

1. Open the contact card for which you want a speed

dialling key and select Options→ Assign speed dial.

The speed dialling grid opens, showing you the

numbers from 1-9.

2. Scroll to a number and press Assign. When you

return to the contact information view, you can see

the speed dial icon next to the number.

• To call the contact by speed dialling, go to standby mode and press the speed

dialling key and

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding a ringing tone for a contact card or group

You can set a ringing tone for each contact card and group. When that contact or

group member calls you, the phone plays the chosen ringing tone (if the caller’s

telephone number is sent with the call and your phone recognises it).

1. Press

group.

to open a contact card or go to the Groups list and select a contact

2. Select Options→ Ringing tone. A list of ringing tones opens.

3. Use the joystick to select the ringing tone you wish to use for the contact or

group and press Select.

• To remove the ringing tone, select Default tone from the list of ringing tones.

Note: For an individual contact, the phone will always use the ringing tone

that was assigned last. So, if you first change a group ringing tone and then the

ringing tone of a single contact that belongs to that group, the ringing tone of the

single contact will be used when the contact calls you the next time.

Managing contact groups

You can create contact groups, which can, for example, be used as distribution

lists for sending text messages and e-mail. A ringing tone may be added to a

group. See ‘Adding a ringing tone for a contact card or group’, p. 44.

Options in the Groups list view: Open, New group, Delete, Rename, Ringing

tone, Contacts info, Settings, Help, and Exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Creating contact groups

1. In the Contacts directory, press

Groups list.

to open the

2. Select Options→ New group.

3. Write a name for the group or use the default name

Group 1 and press OK.

Adding members to a group

1. In the Contacts directory, scroll to the contact you

want to add to a group and select Options→ Add to

group:. A list of available groups opens.

2. Scroll to the group to which you want to add the contact and press

■ Calendar

Go to Menu→ Calendar

In Calendar, you can keep track of your appointments, meetings,

birthdays, anniversaries, and other events. You can also set a calendar alarm to

remind you of upcoming events. Calendar uses shared memory. See ‘Shared

memory’, p. 27.

Download from Www.Somanuals.com. All Manuals Search And Download.

Creating calendar entries

1. Select Options→ New entry and select:

•

Meeting to remind you of an appointment that has a specific date and

time.

•

Memo to write a general entry for a day.

Anniversary to remind you of birthdays or special dates. Anniversary

entries are repeated every year.

2. Fill in the fields. See ‘Calendar entry fields’, p. 47.Use the joystick to move

between fields. Press

predictive text.

to change between upper and lower case,and

3. To save the entry, press Done.

Editing calendar entries

Options when editing a calendar entry: Delete,

Send, Help, and Exit.

1. In the Day view, scroll to the entry and press

open it.

2. Edit the entry fields and press Done.

• If you are editing a repeated entry, choose how you

want the changes to take effect: All occurrences -

all repeated entries are changed / This entry only -

only the current entry will be changed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting calendar entries

• In the Day view, scroll to the entry you want to delete and select Options→

Delete or press

. Press Yes to confirm.

• If you are deleting a repeated entry, choose how you want the change to take

effect: All occurrences - all repeated entries are deleted / This entry only - only

the current entry will be deleted.

Calendar entry fields

•

Subject / Occasion - Write a description of the event.

Location - the place of a meeting, optional.

Start time, End time, Start date, and End date.

Alarm - Press

to activate the fields for Alarm time and Alarm date.

to change the entry to be repeating. Shown with in the

Repeat - Press

Day view.

•

Repeat until - You can set an ending date for the repeated entry, for example,

the ending date of a weekly course you are taking. This option is shown only if

you have selected to repeat the event.

Synchronisation - If you select Private, after synchronisation the calendar

entry can be seen only by you and it will not be shown to others with online

access to view the calendar. This is useful when, for example, you synchronise

your calendar with a calendar on a compatible computer at work. If you select

Public, the calendar entry is shown to others who have access to view your

calendar online. If you select None, the calendar entry will not be copied when

you synchronise your calendar.

Download from Www.Somanuals.com. All Manuals Search And Download.

Calendar views

Press

date.

in the Month, Week, or Day views to automatically highlight today’s

To write a calendar entry, press any digit key (

) in any calendar view. A

Meeting entry is opened and the characters you keyed in are added to the Subject

field.

Synchronisation icons in Month view:

- Private,

Calendar entry icons in Day and Week views:

- Memo, and - Anniversary.

- Public,

- None, and

- the day has more than one entry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Month view

In the Month view, one row equals one week. Today’s date is underlined. Dates

that have calendar entries are marked with a small triangle at the bottom right

corner. There is a frame around the currently selected date.

• To open the Day view, scroll to the date you want to open and press

• To go to a certain date, select Options→ Go to date. Write the date and press

OK.

Week view

In the Week view, the calendar entries for the selected week are shown in seven

day boxes. Today’s day of the week is underlined. Memos and Anniversaries icons

are placed before 8 o’clock. Meeting entries are marked with coloured bars

according to starting and ending times.

• To view or edit an entry, scroll to the cell that has an entry and press

open the Day view, then scroll to the entry and press to open it.

Options in the different calendar views: Open, New entry, Week view /

Month view, Delete, Go to date, Send, Settings, Help, and Exit.

Day view

In the Day view, you can see the calendar entries for the selected day. The entries

are grouped according to their starting time. Memos and Anniversaries are placed

before 8 o’clock.

• To open an entry for editing, scroll to it and press

• Press to go to the next day or press to go to the previous day.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings for calendar views

Select Options→ Settings and select:

•

Calendar alarm tone - To select a personalised alarm tone, or no tone at all.

Default view - To select the view that is shown first when you open Calendar.

Week starts on - To change the starting day of the week.

Week view title - To change the title of the Week view to be the week number

or the week dates.

Setting calendar alarms

1. Create a new Meeting or Anniversary entry, or open a previously created entry.

2. Scroll to Alarm and press

, then select On to open the Alarm time and Alarm

date fields.

3. Set the alarm time and date.

4. Press Done. An alarm indicator

is shown next to the entry in the Day view.

Stopping a calendar alarm

• The alarm duration is one minute. To stop the alarm, press Stop. If you press

any other key, the alarm is set to snooze.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ To-do

Go to Menu→ To-do.

In To-do you can keep a list of tasks that you need to do. The To-do list uses shared

memory. See ‘Shared memory’, p. 27.

1. To start to write a to-do note, press any digitkey (

). The editor opens

and the cursor blinks after the letters you have keyed in.

2. Write the task in the Subject field. Press

to add

special characters.

• To set the due date for the task, scroll to the Due

date field and key in a date.

• To set a priority for the to-do note, scroll to the

Priority field and press

3. To save the to-do note, press Done. If you remove

all characters and press Done, the note will be

deleted, even if you edit a previously saved note.

• To open a to-do note, scroll to it and press

• To delete a to-do note, scroll to it and select Options→ Delete or press

• To mark a to-do note as completed, scroll to it and select Options→ Mark as

done.

• To restore a to-do note, select Options→ Mark as not done.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Importing data from compatible Nokia phones

You can move calendar, contacts, and to-do data from compatible Nokia phones

to your phone using the PC Suite Data Import application. Instructions for using

the application can be found in the help function of PC Suite on the CD-ROM.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Multimedia

■ Camera

Press Camera in standby mode or go to Menu→ Camera.

With the camera you can take pictures of people or events while on the move. The

images are automatically saved in the Gallery application, where you can rename

them and organise them in folders. You can also send images in a multimedia

message, as an e-mail attachment, or via a Bluetooth or infrared connection. The

camera produces JPEG images.

Taking pictures

Note: Obey all local laws governing the taking of pictures. Do not use this feature

illegally.

Options before taking a picture: Capture, Go to Gallery, Self-timer,

Settings, Help, and Exit.

1. Press Camera in standby mode. The Camera application opens and you can see

the view to be captured.

You can see the viewfinder and the cropping lines, which show you the image

area to be captured. You can also see the image counter, which shows you how

many images, depending on the selected picture quality, fit in the memory of

your phone or memory card, if you use one.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Press

the picture. Press

indicator on the display shows the zoom level.

3. To take a picture, press . Do not move the phone

to zoom in on your subject before taking

to zoom out again. The zoom

before the Camera application starts to save the

image. The image is saved automatically in the

Gallery. See ‘Gallery’, p. 64.

Note: The resolution of a zoomed picture is

lower than that of a non-zoomed picture, but the

image remains the same size. You may notice the

difference in image quality if viewed on a PC, for example.

Note: Camera goes into battery saving mode if there have been no key

presses within a minute. To continue taking pictures, press

Options after a picture has been taken: New image, Delete, Send, Rename

image, Go to Gallery, Settings, Help, and Exit.

After the image has been saved:

• If you do not want to save the image, select Options→ Delete.

• To return to the viewfinder to take a new picture, press

You can insert an image into a contact card. See ‘Inserting an image in a contact

card’, p. 39.

Self-timer

Use the self-timer to delay the taking of a picture, so that you can include yourself

in the picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Select Options→ Self-timer.

2. Select the delay 10 seconds, 20 seconds, or 30 seconds.

3. Press Activate. The camera will take the picture after the selected delay has

elapsed.

Settings

In the Camera application settings, you can adjust the image quality setting,

change the default image name, and change the memory location of saved

images.

1. Select Options→ Settings.

2. Scroll to the setting you want to change:

•

Image quality - High, Normal, and Basic. The better the image quality, the

more memory the image consumes. See ‘Images and memory consumption’,

p. 57.

Default image name - By default, Camera names images in the format

‘Image.jpg’. Default image name allows you to set a name for the images

stored.

Memory in use - Select whether you want to store your images in the phone

memory or on the memory card, if you use one.

Camera mode affects image size and orientation

With the different Camera modes, you can affect the size and orientation of the

picture to be taken. When you are taking a picture, press

between the different modes. Choose:

to change

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Standard when you want to take normal landscape pictures,

Portrait when you want to take a smaller icon-sized, vertical picture, which

can be added to a contact card, or

•

Night when the lighting is dim and the Camera needs a longer exposure time

for the picture to be of good quality. Note that, in dim conditions, any

movement while taking a picture may cause it to get blurred. The image size

and orientation is the same for Standard and Night.

• When you are taking a picture in Standard or Night mode, the viewfinder

resolution is 160x120 pixels, and in Portrait mode, 80x96.

• The pictures taken in Standard or Night mode are saved in 640x480 pixel (VGA)

format and those taken in Portrait mode are saved in 80x96 pixel format.

• When you are viewing images, they are scaled to fit the display, which has

176x208 pixels. This means that Standard and Night mode pictures will appear

Download from Www.Somanuals.com. All Manuals Search And Download.

more detailed when viewed on a higher resolution screen, for example, a

computer or when zoomed in Images.

Images and memory consumption

Your phone has approximately 6 MB (megabytes) of free memory for images,

contact information, calendar, messages, and so on. See ‘Shared memory’,

p. 27.Portrait pictures (always taken in High quality) are so small that they take up

very little memory. Pictures taken using the High quality setting and those taken

in Night mode take up the most memory.

If 1 MB of memory is used for images only, it would fit approximately 22 Normal

quality pictures taken in Standard mode. In the table below, you can see

approximately how many images would fit in 1 MB of memory.

Image quality

Picture type

Standard

Night

Basic

Normal

High

Portrait

>300

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Viewing images

Pictures taken with the Camera are stored as images in the Gallery. See ‘Gallery’,

p. 64.

Select an image from the list of images in the Images folder in the Gallery to start

the image viewer and display the image.

When viewing an image, pressing

image in the current folder.

takes you to the next or previous

Options when viewing an image: Send, Set as wallpaper, Rotate, Zoom in,

Zoom out, Full screen, Delete, Rename, View details, Add to ’Go to’, Help, and Exit.

In the images thumbnail view:

1. Press

2. To browse the list of images, press

3. Press to open an image. When the image is open, you can see the name of

the image.

to move between the phone and memory card.

and

You can view animated GIF files in the same way as other images.

Download from Www.Somanuals.com. All Manuals Search And Download.

Zooming on a saved image

1. Select Options→ Zoom in or Zoom out. You can see

the zooming ratio at the top of the display. See

‘Keyboard shortcuts’, p. 59.

2. Press

to return to the initial view. The

zooming ratio is not stored permanently.

If you zoom in on GIF animations while they are

playing, the animation will freeze until normal zoom is

resumed, when play will continue.

Full screen

When you select Options→ Full screen, the panes around the image are removed

so that you can see more of the image. Press

to return to the initial view.

Moving the focus

When you are zooming an image, or viewing an image in full screen mode, use the

joystick to move the focus to the left, right, up, or down, so that you can take a

closer look at one part of the image, for example, its upper right corner.

Keyboard shortcuts

• Rotate 90 degrees:

status is not stored permanently.

- zoom in, - zoom out, press and hold to return to the normal view.

- anticlockwise,

- clockwise. The rotation

•

- change between full screen and normal view.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Video recorder

Goto Menu→ Video recorder.

Note: Obey all local laws governing the taking of videos. Do not use

this feature illegally.

With the Video recorder you can record video clips, on your phone or on a memory

card, if you use one. You can also send video clips that you have recorded.

Video recorder uses shared memory. See ‘Shared memory’, p. 27.

Options in the Video recorder main view: Record, Go to Gallery, Settings,

About product, Help, and Exit.

Recording a video clip

You can record video clips up to 95 kB in size, which relates to approximately 10

seconds in duration, so that it can be conveniently sent as a multimedia message.

Video clips are recorded in the 3GPP file format with the .3gp file extension.

• Open the Video recorder and press

recording.

to start

• To pause recording at any time, press

again, to resume recording.

. Press

• Press

to zoom in on your subject before, or

during, recording. Press

to zoom out again.

Download from Www.Somanuals.com. All Manuals Search And Download.

The video clip is saved to either the phone’s memory or the memory card,

depending on the setting of your Memory in use. See ‘Setting up your Video

recorder’, p. 61.

• To immediately play the video clip you just recorded, select Options→ Play.

• To play previously saved video clips, go to the Gallery. See ‘Gallery’, p. 64.

Options in Video recorder when you have recorded a clip: Play, New video

clip, Send, Rename, Delete, Go to Gallery, Settings, About product, Help, and Exit.

Setting up your Video recorder

Use the following settings to define how videos are recorded.

• Select Options→Settings and choose:

•

Image size - Select Small or Large. Large reduces frame rate.

Audio - Select On or Off. On reduces the maximum recording duration.

Default video name - Define a default name.

Memory in use - Select Phone memory or Memory card.

■ RealOne Player™

Go to Menu→ RealOne Player.

Note: Obey all local laws regarding video playback. Do not use this

feature illegally.

With RealOne Player™, you can play local media files stored in the phone memory,

or memory card, or stream media files over the air from a streaming link. The

Download from Www.Somanuals.com. All Manuals Search And Download.

streaming link can be activated during a browsing session or stored in the phone

memory, or memory card.

Media files are video, music or audio clips. Files with extensions .3gp, .amr, .mp4,

.rm, .ram, .ra and .rv. are supported by RealOne Player.

RealOne Player does not necessarily support all file formats or all the variations of

a file formats. For example, RealOne Player will attempt to open all .mp4 files.

However, some .mp4 files may include content that is not compliant with 3GPP

standards and, therefore, is not supported by this phone. In this case, the

operation might fail and result in partial playback or in an error message.

RealOne Player uses shared memory. See ‘Shared memory’, p. 27.

Options in RealOne Player when a clip has been selected: Play, Continue,

Stop, Mute, Unmute, Clip details, Send, Settings, Help, and Exit.

Playing media files

• To play a media file stored in your phone’s memory

or memory card, select Options→ Open and:

•

Most recent clips - to play one of the last 6 files

played in RealOne Player, or

•

Saved clip - to play a file saved in the Gallery.

See ‘Gallery’, p. 64.

Scroll to a file and press

to play the file.

• To stream content over the air:

Download from Www.Somanuals.com. All Manuals Search And Download.

• Select a streaming link saved in the Gallery. Before your live content begins

streaming, your phone will connect to the site and load the file.

• Open the link to a file in the browser.

To stream live content, you must first configure your default access point. See

‘Access points’, p. 112.

Note: Many service providers will require you to use an Internet access point (IAP)

for your default access point. Other service providers allow you to use a WAP

access point. Contact your service provider for more information.

Note: In RealOne Player, you can only open an rtsp:// URL address. You cannot

open an http:// URL address, however RealOne Player will recognise an http link to

a .ram file since a .ram file is a text file containing an rtsp link.

Shortcuts during play

When a media file is playing use the joystick to seek (move quickly through the

media file), and to mute the sound, as follows:

Press and hold

to seek forwards, or press and hold

to seek backwards

through the media file.

Press and hold

until the indicator is displayed to mute the sound.

until you see the indicator to turn on the sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the settings

Select Options→ Settings then either Video or Connection.

Press

Connection.

Select Video to change the following list of settings:

to move between the different setting tabs for Video and

•

Contrast - Open the slider view to change the contrast.

Repeat - Choose On to have the playing video or audio file restart

automatically once it has finished.

Select Connection to change the connection settings.

■ Gallery

Go to Menu→ Gallery.

Use the Gallery to store and organise your images,

sound clips, and video clips, streaming links and RAM

files.

Gallery uses shared memory. See ‘Shared memory’,

p. 27.

Open the Gallery to see a list of the folders in the

phone memory. Press

to see the folders on the

memory card, if you use one.

Download from Www.Somanuals.com. All Manuals Search And Download.

Select a folder Images, Sound clips, or Video clips (or other folder that you have

created) and press to open it.

In the open folder you can see:

• an icon depicting the type of each file in the folder, or in the case of an image,

a small thumbnail picture; a preview of the image,

• the name of the file,

• the date and time a file was saved, or the size of the file, and

• subfolders, if present.

Options: Open (folder or item), Send, Delete, Create new, Move to folder,

Copy to folder, New folder, Mark/Unmark, Edit, Rename, Gallery downloads, Image

uploader, Receive via infrared, View details, Add to ’Go to’, Settings, Help, and Exit.

You can browse, open, and create folders, mark, copy and move items to folders.

See ‘Actions common to all applications’, p. 23.

Opening files

Select any file and press

to open it. Each file will open in its corresponding

application as follows:

• Images - open in the Image viewer. See ‘Viewing images’, p. 58.

• Sound clips - open and play in the Recorder application. See ‘Recorder’, p. 145.

• Video clips, RAM files, and streaming links - open and play in the RealOne

Player application. See ‘RealOne Player™’, p. 61.

• Subfolders - open to display contents.

Download from Www.Somanuals.com. All Manuals Search And Download.

Other default folders

Picture messages folder

Use this folder to store pictures sent to you in picture messages.

• Select the folder Images→ Picture msgs..

Options in the Picture messages folder: Open, Send, Delete, Mark/Unmark,

Rename, View details, Help, and Exit.

To save a picture that you have received in a picture message, go to Messaging→

Inbox, open the message, and select Options→ Save picture.

Wallpapers folder

Use this folder to store pictures that you want to use as background images.

• Select the folder Images→ Wallpapers.

Downloading files

To download files into the Gallery using the browser:

• Select Options→ Gallery downloads and choose from Graphic downloads,

Video downloads, or Sound downloads. The browser opens and you can choose

a bookmark for the site to download from. See ‘Viewing bookmarks’, p. 151.

To download files, you must first configure your default access point. See ‘Access

points’, p. 112.

Once items have been downloaded, the browser closes and the phone returns to

the Gallery view.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: Many service providers will require you to use an Internet access

point (IAP) for your default access point. Other service providers allow you to use a

WAP access point. Contact your service provider for more information.

Uploading images to an image server (network service)

You can send your pictures to an image server to allow others to share your

pictures online.

Note: You can only upload .JPG files to an image server.

Before you can upload images, you must enter the settings for the image server.

See ‘Set up the image server’, p. 67.You can get these settings from your service

provider.

1. Select Options→ Image uploader.

2. To begin an upload, mark the images, or the entire folder that you want to

upload, and select Upload.

3. Enter a name for the folder on the image server that the images will be stored

in and press

Set up the image server

1. Select Settings→ Image servers and press

field. See ‘Access points’, p. 112.

. Fill in the details for each

2. Press

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Messaging

Go to Menu→ Messaging.

In Messaging you can create, send, receive, view, edit, and organise:

• text messages,

• multimedia messages,

• e-mail messages, and

• smart messages, special text messages containing data.

Text messages and multimedia messages use shared memory. See ‘Shared

memory’, p. 27.

You can also receive messages and data via an infrared or Bluetooth connection,

receive service messages, cell broadcast messages, and send service commands.

Options in the Messaging main view: Create message, Connect (shown if

you have defined settings for the mailbox), or Disconnect (shown if there is an

active connection to the mailbox), SIM messages, Cell broadcast, Service

commands, Settings, Help, and Exit.

When you open Messaging, you can see the New message function and a list of

default folders:

Inbox - contains received messages except e-mail and cell broadcast

messages. E-mail messages are stored in the Mailbox. You can read cell broadcast

messages by selecting Options→ Cell broadcast.

Download from Www.Somanuals.com. All Manuals Search And Download.

My folders - for organising your messages into folders.

Mailbox - When you open this folder, you can either connect to your remote

mailbox to retrieve your new e-mail messages or view your previously retrieved e-

mail messages offline. See ‘Viewing e-mail messages when online’, p. 90. After

you have defined settings for a new mailbox, the name given to that mailbox will

replace Mailbox in the main view. See ‘Settings for e-mail’, p. 101.

Drafts - stores draft messages that have not been sent.

Sent - stores the last 15 messages that have been sent. You can change the

number of messages to be saved . See ‘Settings for the Other folder’, p. 104.

Note: Messages or data that have been sent via an infrared or Bluetooth

connection are not saved in the Draft or Sent folders.

Outbox - is a temporary storage place for messages waiting to be sent.

Reports- you can request the network to send you a delivery report of the

text messages, smart messages, and multimedia messages you have sent. To turn

on delivery report reception, select Options→ Settings→ Text message or

Multimedia message, scroll to Receive report, and select Yes.

Note: Receiving a delivery report of a multimedia message that has been

sent to an e-mail address might not be possible.

Note: Before you create a multimedia message, write an e-mail, or connect

to your remote mailbox, you must have the correct connection settings in place.

See ‘Settings needed for e-mail’, p. 82.See ‘Settings needed for multimedia

messaging’, p. 79.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Messaging - General information

The message status is always either draft, sent, or received. Messages can be saved

to the Drafts folder before they are sent. Messages are temporarily placed in the

Outbox to wait for sending. After a message has been sent, you can find a copy of

the message in the Sent folder. Received and sent messages are in read-only state

until you select Reply or Forward, which copies the message to an editor. Note

that you cannot forward e-mail messages you yourself have sent, and that

restrictions may apply to forwarding received messages.

Opening a received message

• When you receive a message,

and the note 1 new message is shown in

standby mode, press Show to open the message.

• If you have more than one new message, press Show to open the Inbox to see

the message headings. To open a message in Inbox, scroll to it and press

Adding a recipient to a message

When you create a message, there are several ways to add a recipient:

• add recipients from the Contacts directory. To open the Contacts directory,

press

or in the To: or Cc: fields, or select Options→ Add recipient. Scroll

to mark it. You can mark several recipients at a

to a contact and press

time. Press OKto return to the message. The recipients are listed in the To: field

and automatically separated with a semicolon (;).

• write the phone number or e-mail address of the recipient in the To: field, or

Download from Www.Somanuals.com. All Manuals Search And Download.

• copy the recipient information from another application and then paste it to

the To: field. See ‘Copying text’, p. 75.

Press

to delete a recipient to the left of the cursor.

Note: If you write many phone numbers or e-mail addresses in the To: field,

you must remember to add a semicolon (;) between each item to separate them

from each other. When you retrieve recipients from the Contacts directory, the

semicolon is added automatically.

Sending options

To change how a message is sent, select Options→ Sending options when you are

editing a message. When you save the message, its sending settings are also

saved.

■ Writing text

You can key in text in two different ways, using the method traditionally used in

mobile phones or another method called predictive text input.

To set predictive text input on or off, press

twice quickly when writing text.

Using traditional text input

The indicator

is shown on the top right of the display when you are writing

text using traditional text input.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Press a number key (

), repeatedly until the desired character

appears. Note that there are more characters available for a number key than

are printed on the key.

Icons:

and

indicate the selected case.

means that

the first letter of the next word is written in upper case, and all other letters

will automatically be written in lower case.

indicates number mode.

• To insert a number, press and hold the number key.

To switch between letter and number mode, press and hold

• If the next letter is located on the same key as the present one, wait until the

cursor appears (or press

letter.

to end the time-out period), and then key in the

to remove a character. Press and hold to

• If you make a mistake, press

clear more than one character.

• The most common punctuation marks are available under

repeatedly to reach the desired punctuation mark.

. Press

Press

the list and press Select to select a character. To insert multiple special

characters, press to select, scroll to the next character, press

to open a list of special characters. Use the joystick to move through

again.

Continue until you have entered all characters, and press Select to return to

the message.

• To insert a space, press

three times.

. To move the cursor to the next line, press

• To switch between upper and lower case, press

Download from Www.Somanuals.com. All Manuals Search And Download.

Using predictive text input

To activate predictive text input, press

and select

Dictionary on. This will activate predictive text input

for all editors in the phone. The

indicator is

shown at the top of the display.

1. Write the desired word by pressing the keys

. Press each key only once for one letter. The

word changes after every key press.

For example, to write ‘Nokia’ when the English

dictionary is selected, press

for N,

for o,

for k,

for i, and

for a.

The word suggestion changes after each key press.

2. When you have finished the word, check that it is correct.

• If the word is correct, you can confirm it by pressing

or by pressing

to insert a space. The underlining disappears and you can begin to

write a new word.

• If the word is not correct, you have the following options:

• Press

repeatedly to view the matching words the dictionary has

found one by one.

• Press

and select Dictionary→ Matches to view a list of matching

words. Scroll to the word you want to use and press

to select it.

Download from Www.Somanuals.com. All Manuals Search And Download.

• If the ? character is shown after the word, the word you intended to write is

not in the dictionary. To add a word to the dictionary, press Spell, key in the

word (max. 32 letters) using traditional text input, and press OK. The word

is added to the dictionary. When the dictionary becomes full, a new word

replaces the oldest added word.

• To remove the ? and clear characters one by one from the word, press

Tips on using predictive text input

• To erase a character, press

character.

. Press and hold

to clear more than one

• To change between the different character cases Abc, abc, and ABC, press

Note that if you press twice quickly the predictive text input is turned off.

• To insert a number in letter mode, press and hold the desired number key, or

press and select number mode, key in the numbers you want, and press OK.

• The most common punctuation marks are available under

repeatedly to reach the desired punctuation mark.

. Press

Press and hold

to open a list of special characters. Use the joystick to scroll

through the list and press Select to select a character. Or press

Insert symbol. To insert multiple special characters, press

and select

to select, scroll

to the next character, press

again. Continue until you have entered all

characters, and press Select to return to the message.

Note: The predictive text input will try to guess which commonly used

punctuation mark (.,?!‘) is needed. The order and availability of the

punctuation marks depend on the language of the dictionary.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Press

by one.

repeatedly to view the matching words the dictionary has found one

When a word has been entered with predictive text on, you can press

, select

Dictionary and select:

•

Matches - to view a list of words that correspond to your key presses. Scroll to

the desired word and press

•

Insert word - to add a word (max. 32 letters) to the dictionary by using

traditional text input. When the dictionary becomes full, a new word replaces

the oldest added word.

•

Edit word- to open a view where you can edit the word, available only if the

word is active (underlined).

Off - to turn off predictive text input for all editors in the phone.

Writing compound words

• Write the first half of a compound word and confirm it by pressing

. Write

the last part of the compound word and complete the compound word by

pressing

to add a space.

Copying text

If you want to copy text to the clipboard, the following are the easiest methods:

1. To select letters and words, press and hold

. At the same time, press

. As the selection moves, text is highlighted.

To select lines of text, press and hold

. At the same time press or

Download from Www.Somanuals.com. All Manuals Search And Download.

2. To end the selection, release pressing the joystick while still holding

3. To copy the text to the clipboard, while still holding , press Copy.

Or, release and then press it once to open a list of editing commands, for

example, Copy or Cut.

If you want to remove the selected text from the document, press

4. To insert the text into a document, press and hold

Or, press once and select Paste.

and press Paste.

Editing options

When you press

, the following options appear (depending on the editing

mode and situation you are in):

•

Dictionary (predictive text input),

Alpha mode / Number mode (traditional text input),

Cut, Copy - available only if text has been selected first,

Paste - available only when text has been either cut or copied to the clipboard,

Insert symbol, and

Writing language: - changes the input language for all editors in the phone.

See ‘Phone settings’, p. 105.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Creating and sending new messages

Note: When sending messages, your phone may display the word "Sent". This is an

indication that the message has been sent by your phone to the message centre number

programmed into your phone. This is not an indication that the message has been received

at the intended destination. For more details about messaging services, check with your

service provider.

You can start to create a message in two ways:

• By selecting New message→ Create:→ Text

message, Multimedia message, or E-mail in the

Messaging main view, or

• Start to create a message from an application that

has the option Send. In this case the file that was

selected (such as an image or text) is added to the

message.

Writing and sending text messages

Options in the text message editor: Send, Add recipient, Insert, Delete,

Check contacts, Message details, Sending options, Help, and Exit.

1. Select New message. A list of message options opens.

2. Select Create:→ Text message. The editor opens with the cursor in the To: field.

Press

to select recipient(s) from the Contacts directory or write the phone

number of the recipient.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press

to add a semicolon (;) to separate each recipient. Press

to move

to the message field.

3. Write the message. In the navigation bar, you can see the message length

indicator counting backwards from 160. For example, 10 (2) means that you

can still add 10 characters for the text to be sent as two messages.

4. To send the message, select Options→ Send or press

Note: Your phone supports the sending of multiple text messages at the

same time, therefore, the normal 160 character limit for one text message can be

exceeded. If your text exceeds 160 characters, it will be sent in two or more

messages and message sending may cost you more.

Creating and sending picture messages

Your phone allows you to send and receive picture

messages. Picture messages are text messages that

contain small black-and-white graphics. There are

several default pictures available in the Images→

Picture messages folder in the Gallery.

Note: This function can be used only if it is supported

by your network operator or service provider. Only phones

that offer picture message features can receive and display

picture messages.

Options in the picture message editor: Send,

Add recipient, Insert, Remove picture, Delete, Check contacts, Message details,

Help, and Exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

To send a picture message:

1. There are two possibilities, either:

• Go to Menu→ Gallery→ Images→ Picture messages and select a picture to

be sent. Select Options→ Send, or

• Select Messaging→ New message→ Create:→ Text message and select

Options→ Insert→ Picture.

2. Enter recipient information and add text.

3. Select Options→ Send or press

Note: Each picture message is made up of several text messages. Therefore,

sending one picture message may cost more than sending one text message.

Multimedia messages

A multimedia message can contain a combination of text, images, video and

sound clips.

Note: Multimedia messages can be used only if supported by your network

operator or service provider. Only devices that offer multimedia messages or e-

mail features can receive and display multimedia messages.

Settings needed for multimedia messaging

You may receive the settings as a smart message from your network operator or

service provider. See ‘Receiving smart messages’, p. 87.

For availability of and subscription to data services, please contact your network

operator or service provider.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Go to Messaging→ Options→ Settings→ Multimedia message. Open Access

point in use and select the access point you created. See ‘Settings for

multimedia messages’, p. 99.

Creating multimedia messages

Note: When you are sending a multimedia message to any phone other

than Nokia 6600, it is recommended to use a smaller image size and a sound clip

that is no longer than 15 seconds. The default setting is Image size: Small. When

you are sending a multimedia message to an e-mail address or another Nokia

6600, if possible, use the larger image size (network dependent). To change the

setting, select Messaging→ Options→ Settings→ Multimedia message→ Image

size→ Large.

Options in the multimedia message editor: Send, Add recipient, New

presentation, Insert, Remove, Move, Preview message, Objects, Delete, Check

contacts, Message details, Sending options, Help, and Exit.

1. In Messaging, select New message→ Create:→

Multimedia message and press

2. Press

to select the recipient(s) from the

Contacts directory or write the phone number or e-

mail address of the recipient in the To: field. Add a

semicolon (;) to separate each recipient. Press

to move to the next field.

3. You can add the different objects of the multimedia

message in any order you want.

Download from Www.Somanuals.com. All Manuals Search And Download.

• To add an image, select Options→ Insert→ Image or New image.

• To add a sound, select Options→ Insert→ Sound clip or New sound clip.

When sound has been added, the

icon is shown in the navigation bar.

• To write text, press

• If you select Insert→ Image, Sound clip, or Video clip, a list of items opens.

Scroll to the item you wish to add and press Select.

Note: If you chose Image, Sound clip, or Video clip, first you need to

select whether the image is stored in the phone’s memory or the memory

card, if one is used.

• If you select Insert→ New image, Camera opens and you can take a new

picture. Press Delete to remove the picture and take another instead.

• If you select Insert→ New sound clip, Recorder opens and you can record a

new sound. The sound is automatically saved and a copy is inserted in the

message.

4. To add a new slide, select Options→ Insert→ Slide.

5. To send the message, select Options→ Send or press

Important: Copyright protections may prevent some images, ringtones, and other

content from being copied, modified, transferred or forwarded.

Removing an object from a multimedia message

To remove a multimedia object, select Options→ Remove→ Image, Sound clip, or

Video clip. Press

to remove text.

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with different media objects

To see all the different media objects included in a

multimedia message, open a multimedia message and

select Options→ Objects to open the Objects view.

In the Objects view, you can change the order of the

different objects, delete objects, or open an object in a

corresponding application.

Options in the Objects view: Open, Insert, Place

images first / Place text first, Remove, Help, and Exit.

E-mail

Settings needed for e-mail

Before you can send, receive, retrieve, reply to, and forward e-mail to a separate

e-mail account, you must:

• Configure an Internet access point (IAP) correctly. See ‘Connection settings’,

p. 109.

• Define your e-mail settings correctly. See ‘Settings for e-mail’, p. 101.

Note: Follow the instructions given by your remote mailbox and Internet

service provider.

Writing and sending e-mail messages

Options in the e-mail editor: Send, Add recipient, Insert, Attachments,

Delete, Check contacts, Message details, Sending options, Help, and Exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Select New message→ Create:→ E-mail. The editor opens.

2. Press to select the recipient(s) from the Contacts directory or write the e-

mail address of the recipient in the To: field. Add a semicolon (;) to separate

each recipient. If you want to send a copy of your e-mail to someone, write the

address in the Cc: field. Press

to move to the next field.

3. Write the message. If you want to add an attachment to the e-mail, select

Options→ Insert→ Image, Sound clip, Video clip, or Note. will appear in the

navigation bar to indicate that the e-mail has an attachment. Template adds

pre-written text to the e-mail.

You can also add an attachment to an e-mail by selecting Options→

Attachments in an open e-mail. The Attachments view opens where you can

add, view, and remove attachments.

Note: If you chose Image, first you need to select whether the image is

stored in the phone’s memory or the memory card, if one is used.

4. To remove an attachment, scroll to the attachment and select Options→

Remove.

5. To send the e-mail, select Options→ Send or press

Important: Copyright protections may prevent some images, ringtones, and other

content from being copied, modified, transferred or forwarded.

Note: E-mail messages are automatically placed in Outbox before sending.

In case something goes wrong while the phone is sending the e-mail, the e-mail is

left in Outbox with the status Failed.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Inbox - receiving messages

Options in Inbox: Open, Create message, Delete, Message details,

Move to folder, Mark/Unmark, Help, and Exit.

Messages and data can be received via text message, multimedia message, an

infrared connection, or a Bluetooth connection. When there are unread messages

in Inbox, the icon changes to

In Inbox, the message icons tell you what kind of a message it is. Here are some of

the icons that you may see:

for an unread text message and

for an unread multimedia message,

for an unread service message,

for data received via infrared,

for data received via Bluetooth, and

for an unknown message type.

for an unread smart message,

Options in different message viewers

The available options depend on the type of message you have opened for

viewing:

•

Save picture - saves the picture to thePicture messages folder in the Gallery.

Reply - copies the address of the sender to the To: field. Select Reply→ To all -

to copy the address of the sender and Cc. field recipients to the new message.

•

Forward - copies the message contents to an editor.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Call - call by pressing

View image - allows you to view and save the image.

Play sound clip - allows you to listen to the sound in the message.

Objects - shows you a list of all the different multimedia objects in a

multimedia message.

•

Attachments - shows you a list of files sent as e-mail attachments.

Message details - shows detailed information about a message.

Move to folder / Copy to folder - allows you to move or copy message(s) to My

folders, Inbox, or other folders you have created.

•

Add to Contacts - allows you to copy the phone number or e-mail address of

the message sender to the Contacts directory. Choose whether you want to

create a new contact card or add the information to an existing contact card.

Find - Searches the message for phone numbers, e-mail addresses, and

Internet addresses. After the search, you can make a call or send a message to

the found number or e-mail address, or save the data to Contacts or as a

bookmark.

Viewing multimedia messages in Inbox

Multimedia message objects

Options in the Objects view: Open, Save, Send, Call, and Exit.

• To see what kinds of media objects have been included in the multimedia

message, open the message and select Options→ Objects. In the Objects view

Download from Www.Somanuals.com. All Manuals Search And Download.

you can view files that have been included in the multimedia message. You can

choose to save the file in your phone or to send it, for example, via infrared to

another device.

Important: Multimedia message objects may contain viruses or otherwise be

harmful to your phone or PC. Do not open any attachment if you are not sure of the

trustworthiness of the sender. See ‘Certif. management’, p. 120.

Sounds in a multimedia message

Sound objects in a multimedia message are indicated by

bar.

in the navigation

• If you want to listen to a sound again after all the objects have been shown

and the playing of the sound has stopped, select Options→ Play sound clip.

Viewing a multimedia presentation

When you have received a multimedia message that includes a presentation,

select Play presentation, the presentation will open and start.

A multimedia message containing presentation content can still be viewed as a

standard multimedia message.

Objects within the presentation may not start automatically. If, for example, a

video does not play when the presentation starts, move to the video clip object

using the joystick and press . All objects can be selected individually and opened.

Download from Www.Somanuals.com. All Manuals Search And Download.

Receiving smart messages

Your phone can receive many kinds of smart messages, text messages that contain

data (also called Over-The-Air (OTA) messages). To open a received smart

message, open Inbox, scroll to the smart message (

), and press

•

Picture message - to save the picture in the Picture messages folder in the

Gallery for later use, select Options→ Save picture.

•

Business card - to save the contact information, select Options→ Save

business card.

Note: If certificates or sound files are attached to business cards, they

will not be saved.

•

Ringing tone - to save the ringing tone to the Gallery, select Options→ Save.

Operator logo - to save the logo, select Options→ Save. The operator logo can

now be seen in standby mode instead of the network operator’s own

identification.

•

Calendar entry - to save the invitation to Calendar, select Options→ Save to

Calendar.

Browser message - to save the bookmark, select Options→ Save to bookmarks.

The bookmark is added to the Bookmarks list in browser services.

If the message contains both browser access point settings and bookmarks, to

save the data select Options→ Save all. Or, select Options→ View details to

view the bookmark and access point information separately. If you do not want

to save all data, select a setting or bookmark, open the details, and select

Download from Www.Somanuals.com. All Manuals Search And Download.

Options→ Save to Settings or Save to bookmarks depending on what you are

viewing.

•

E-mail notification - Tells you how many new e-mails you have in your remote

mailbox. An extended notification may list more detailed information such as

subject, sender, attachments, and so on.

• In addition, you can receive a text message service number, voice mailbox

number, profile settings for remote synchronisation, access point settings for

the browser, multimedia messaging or e-mail, access point login script

settings, or e-mail settings.

To save the settings, select Options→ Save to SMS sett., Save to Voice mail,

Save to Settings, or Save to e-mail sett..

Service messages (network service)

You can order service messages (pushed messages) from service providers. Service

messages can be notifications of, for example, news headlines and they may

contain a text message or address of a browser service. For availability and

subscription, contact your service provider.

Viewing service messages in Inbox

Options when viewing a service message: Download message, Move to

folder, Message details, Help, and Exit.

1. In Inbox, scroll to a service message ( ) and press

2. To download or view the service, press Download message. The phone starts to

make a data connection, if needed.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Press Back to return to Inbox.

Viewing service messages in the browser

When you are browsing, select Options→ Read service msgs. to download and

view new service messages.

■ My folders

In My folders you can organise your messages into folders, create new

folders, and rename and delete folders.

Templates folder

• You can use text templates to avoid rewriting messages that you send often. To

create a new template, select Options→ New template.

■ Remote mailbox (network service)

When you open this folder, you can either connect to your remote

mailbox to:

• retrieve new e-mail headings or messages, or

• view your previously retrieved e-mail headings or messages offline.

If you select New message→ Create:→ E-mail or Mailbox in the Messaging main

view and you have not set up your e-mail account, you will be prompted to do so.

See ‘Settings needed for e-mail’, p. 82.

Download from Www.Somanuals.com. All Manuals Search And Download.

When you create a new mailbox, the name you give to the mailbox automatically

replaces Mailbox in the Messaging main view. You can have several mailboxes

(max. six).

The Settings wizard program included in PC Suite for this phone can help you

configure access point and mailbox settings. You can also copy existing settings,

for example, from your computer to your phone. See the CD-ROM supplied in the

sales package.

Opening the mailbox

When you open the mailbox, you can choose whether you want to view the

previously retrieved e-mail messages and e-mail headings offline or connect to

the e-mail server.

• When you scroll to your mailbox and press

, the phone asks you if you want

to Connect to mailbox? Select Yes to connect to your mailbox or No to view

previously retrieved e-mail messages offline.

• Another way to start a connection is to select Options→ Connect.

Viewing e-mail messages when online

When you are online, you are continuously connected to a remote mailbox via a

data call or a packet data connection. See ‘Data connection indicators’, p. 19.See

‘GSM data calls’, p. 110.See ‘Packet data (General Packet Radio Service, GPRS)’,

p. 110.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: If you are using the POP3 protocol, e-mail messages are not updated

automatically in online mode. To see the newest e-mail messages, you need to

disconnect and then make a new connection to your mailbox.

Viewing e-mail messages when offline

When you view e-mail messages offline, your phone is not connected to the

remote mailbox. This mode may help you to save on connection costs. See ‘GSM

data calls’, p. 110.

To view e-mail messages offline, you must first retrieve e-mail messages from

your mailbox, see the next section.

You can continue reading the retrieved e-mail headings and/or the retrieved e-

mail messages offline. You can write new e-mail messages, reply to the retrieved

e-mail messages, and forward e-mail messages. You can order the e-mail

messages to be sent the next time you connect to the mailbox. When you open

Mailbox the next time and you want to view and read the e-mail messages offline,

answer No to the Connect to mailbox? query.

Options when viewing e-mail headings: Open, Create message, Connect /

Disconnect, Reply, Retrieve e-mail, Delete, Message details, Mark as read, Sort by,

Copy to folder, Mark/Unmark, Help, and Exit.

Retrieving e-mail messages from the mailbox

• If you are offline, select Options→ Connect to start a connection to a remote

mailbox.

Download from Www.Somanuals.com. All Manuals Search And Download.

The remote mailbox view is similar to the Inbox folder

in Messaging. You can move up and down in the list by

pressing

. The following icons are used to

show the status of the e-mail:

- new e-mail (offline or online mode). The content

has not been retrieved from the mailbox to your phone

(the arrow in the icon is pointing outwards).

- new e-mail, the content has been retrieved from

the mailbox (arrow pointing inwards).

- for e-mail messages that have been read.

- for e-mail headings that have been read and the message content has been

deleted from the phone.

1. When you have an open connection to a remote mailbox, select Options→

Retrieve e-mail→:

•

New - to retrieve all new e-mail messages to your phone.

Selected - to retrieve only the e-mail messages that have been marked. Use

the Mark/Unmark→ Mark / Unmark commands to select messages one by

one. See ‘Actions common to all applications’, p. 23.

•

All - to retrieve all messages from the mailbox.

To cancel retrieving, press Cancel.

2. After you have retrieved the e-mail messages, you can continue viewing them

online. Select Options→ Disconnect to close the connection and to view the

e-mail messages offline.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening e-mail messages

Options when viewing an e-mail message: Reply, Forward, Delete,

Attachments, Message details, Move to folder / Copy to folder, Add to Contacts,

Find, Help, and Exit.

• When you are viewing e-mail messages either in online or offline mode, scroll

to the e-mail you want to view and press

to open it. If the e-mail message

has not been retrieved (arrow in the icon is pointing outwards) and you are

offline and select Open, you will be asked if you want to retrieve this message

from the mailbox. The data connection is left open after the e-mail has been

retrieved. Select Options→ Disconnect to end the data connection.

Disconnecting from mailbox

When you are online, select Options→ Disconnect to end the data call or GPRS

connection to the remote mailbox. See ‘Data connection indicators’, p. 19.

Viewing e-mail attachments

Options in the Attachments view: Open, Retrieve, Save, Send, Delete, Help,

and Exit.

• Open a message that has the attachment indicator and select Options→

Attachments to open the Attachments view. In the Attachments view, you can

retrieve, open, or save attachments, in supported formats. You can also send

attachments, via infrared or Bluetooth.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important: E-mail attachments may contain viruses or otherwise be harmful to your

phone or PC. Do not open any attachment if you are not sure of the trustworthiness of the

sender. See ‘Certif. management’, p. 120.

Retrieving attachments to the phone

• If the attachment has a dimmed indicator, it has not been retrieved to the

phone. To retrieve the attachment, scroll to it and select Options→ Retrieve.

Note: If your mailbox uses the IMAP4 protocol, you can decide whether to

retrieve e-mail headings only, messages only, or messages and attachments. With

the POP3 protocol, the options are e-mail headings only or messages and

attachments. See ‘Settings for e-mail’, p. 101.

Opening an attachment

1. In the Attachments view, scroll to an attachment and press

to open it.

• If you are online, the attachment is retrieved directly from the server and

opened in the corresponding application.

• If you are offline, the phone asks if you want to retrieve the attachment to

the phone. If you answer Yes, a connection to the remote mailbox is started.

2. Press Back to return to the e-mail viewer.

Saving attachments separately

To save an attachment, select Options→ Save in the Attachments view. The

attachment is saved in the corresponding application. For example, sounds can be

saved in the Gallery, and text files (.TXT) in Notes.

Note: Attachments, such as images, can be saved on the memory card, if

one is used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting e-mail messages

• To delete an e-mail from the phone while still retaining it in the remote

mailbox:

Select Options→ Delete→ Phone only.

Note: The phone mirrors the e-mail headings in the remote mailbox. So,

although you delete the message content, the e-mail heading stays in your phone.

If you want to remove the heading as well, you have to first delete the e-mail

message from your remote mailbox and then make a connection from your phone

to the remote mailbox again to update the status.

• To delete an e-mail from both the phone and the remote mailbox:

Select Options→ Delete→ Phone and server.

Note: If you are offline, the e-mail will be deleted first from your phone.

During the next connection to the remote mailbox, it will be automatically

deleted from the remote mailbox.

If you are using the POP3 protocol, messages marked to be deleted are removed

only after you have closed the connection to the remote mailbox.

Undeleting e-mail messages when offline

To cancel deleting an e-mail from both the phone and server, scroll to an e-mail

that has been marked to be deleted during the next connection ( ), and select

Options→ Undelete.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Outbox

Outbox is a temporary storage place for messages that are waiting to

be sent.

Status of the messages in Outbox:

•

Sending - A connection is being made and the message is being sent.

•

Waiting / Queued - For example, if there are two similar types of messages in

Outbox, one of them is waiting until the first one is sent.

•

Resend at (time) - Sending has failed. The phone will try to send the message

again after a time-out period. Press Send if you want to restart the sending

immediately.

•

Deferred - You can set documents to be ‘on hold’ while they are in Outbox.

Scroll to a message that is being sent and select Options→ Defer sending.

Failed - The maximum number of sending attempts has been reached. If you

were trying to send a text message, open the message and check that the

Sending settings are correct.

■ Viewing messages on a SIM card

In the Messaging main view, select Options→ SIM messages.

Before you can view SIM messages, you need to copy them to a folder in your

phone. See ‘Actions common to all applications’, p. 23.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Cell broadcast (network service)

In the Messaging main view, select Options→ Cell broadcast.

You may be able to receive messages on various topics, such as weather

or traffic conditions from your service provider. For available topics and relevant

topic numbers, contact your service provider. In the main view you can see:

• the status of the topic:

unsubscribed messages.

- for new, subscribed messages and

- for new,

• the topic number, topic name, and whether it has been flagged ( ) for follow-

up. You will be notified when messages belonging to a flagged topic have

arrived.

Options in Cell broadcast: Open, Subscribe /Unsubscribe, Hotmark /

Unhotmark, Topic, Settings, Help, and Exit.

Note: A packet data (GPRS) connection may prevent cell broadcast

reception. Contact your network operator for the correct GPRS settings. See

‘Packet data (General Packet Radio Service, GPRS)’, p. 110.

■ Service command editor

In the Messaging main view, select Options→ Service commands.

You can send service requests, such as activation commands for network services

(also known as USSD commands), to your service provider. For more information,

contact your service provider. To send a request:

• in standby mode or when you have an active call, key in the command

number(s) and press Send, or

Download from Www.Somanuals.com. All Manuals Search And Download.

• if you need to enter letters as well as numbers, select Messaging→ Options→

Service commands.

■ Messaging settings

The Messaging settings have been divided into groups according to the different

message types.

Settings for text messages

Go to Messaging and select Options→ Settings→ Text message to open the

following list of settings:

•

Message centres - Lists all the message centres that have been defined.

Options when editing message centre settings: New msg. centre, Edit,

Delete, Help, and Exit.

•

Msg. centre in use (Message centre in use)- Defines which message centre is

used for delivering text messages and smart messages such as picture

messages.

•

Receive report (delivery report)- When this network service is set to Yes, the

status of the sent message (Pending, Failed, Delivered) is shown in the Reports.

Message validity - If the recipient of a message cannot be reached within the

validity period, the message is removed from the message service centre. Note

that the network must support this feature. Maximum time is the maximum

amount of time allowed by the network.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Message sent as - The options are Text, Fax, Paging, and E-mail. For further

information, contact your network operator.

Note: Change this option only if you are sure that your message centre

is able to convert text messages into these other formats.

•

Preferred connection - You can send text messages via the normal GSM

network or via GPRS, if supported by the network. See ‘Packet data (General

Packet Radio Service, GPRS)’, p. 110.

Reply via same ctr. (network service) - By setting this option to Yes, if the

recipient replies to your message, the return message is sent using the same

message service centre number. Note that this may not work between all

operators.

Settings for multimedia messages

Go to Messaging and select Options→ Settings→ Multimedia message to open

the following list of settings:

•

Access point in use (Must be defined) - Select which access point is used as the

preferred connection for the multimedia message centre. See ‘Settings needed

for multimedia messaging’, p. 79.

Note: If you receive multimedia message settings in a smart message and

save them, the received settings are automatically used for the Access point. See

‘Receiving smart messages’, p. 87.

•

Multimedia reception - Select:

Download from Www.Somanuals.com. All Manuals Search And Download.

Only in home net. - if you want to receive multimedia messages only when you

are in your home network. When you are outside your home network,

multimedia message reception is turned off.

Always on - if you always want to allow the reception of multimedia messages.

Off - if you do not want to receive multimedia messages or advertisements at

all.

Important:

• If the settings Only in home net. or Always on have been selected,

your phone can make an active data call or GPRS connection without

your knowledge.

•

On receiving msg. - Select:

Retr. immediately - if you want the phone to try to retrieve multimedia

messages instantly. If there are messages with Deferred status, they will be

retrieved as well.

Defer retrieval - if you want the multimedia messaging centre to save the

message to be retrieved later. When you want to retrieve the message, set On

receiving msg. to Retr. immediately.

Reject message - if you want to reject multimedia messages. The multimedia

message centre will delete the messages.

•

Allow anon. messages - Select No, if you want to reject messages coming from

an anonymous sender.

Receive adverts - Define whether you want to allow reception of multimedia

message advertisements or not.

100

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Receive report - Set to Yes, if you want the status of the sent message

(Pending, Failed, Delivered) to be shown in the Reports.

Deny report sending - Choose Yes, if you do not want your phone to send

delivery reports of received multimedia messages.

Message validity (network service) - If the recipient of a message cannot be

reached within the validity period, the message is removed from the

multimedia message centre. Maximum time is the maximum amount of time

allowed by the network.

•

Image size - Define the size of the image in a multimedia message. The options

are: Small (max. of 160*120 pixels) and Large (max. 640*480 pixels).

Default speaker - Choose Loudspeaker or Handset, depending on whether you

want the sounds in a multimedia message to be played through the

loudspeaker or the earpiece. See ‘Loudspeaker’, p. 26.

Settings for e-mail

Go to Messaging and select Options→ Settings→ E-mail.

Open Mailbox in use to select which mailbox you want to use.

Settings for Mailboxes

Options when editing e-mail settings: Edit, New mailbox, Delete, Help, and

Exit.

Select Mailboxes to open a list of mailboxes that have been defined. If no

mailboxes have been defined, you will be prompted to do so. The following list of

settings is shown (this information is available from your e-mail service provider):

101

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Mailbox name - Write a descriptive name for the mailbox.

Access point in use (Must be defined) - The Internet access point (IAP) used for

the mailbox. Choose an IAP from the list. See ‘Connection settings’, p. 109.

•

My e-mail address (Must be defined) - Write the e-mail address given to you

by your service provider. The address must contain the @ character. Replies to

your messages are sent to this address.

•

Outgoing mail server: (Must be defined) - Write the IP address or host name of

the computer that sends your e-mail.

Send message (network service) - Define how e-mail is sent from your phone.

Immediately - A connection to the mailbox is started immediately after you

have selected Send. During next conn. - E-mail is sent when you connect to

your remote mailbox the next time.

•

Send copy to self - Select Yes to save a copy of the e-mail to your remote

mailbox and to the address defined in My e-mail address.

Include signature - Select Yes if you want to attach a signature to your e-mail

messages and to start to write or edit a signature text.

•

User name: - Write your user name, given to you by your service provider.

Password: - Write your password. If you leave this field blank, you will be

prompted for the password when you try to connect to your remote mailbox.

•

Incoming mail server: (Must be defined) - The IP address or host name of the

computer that receives your e-mail.

Mailbox type: - Defines the e-mail protocol your remote mailbox service

provider recommends. The options are POP3 and IMAP4.

102

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: This setting can be selected only once and cannot be changed if

you have saved or exited from the mailbox settings.

•

Security - Used with the POP3, IMAP4, and SMTP protocols to secure the

connection to the remote mailbox.

APOP secure login - Used with the POP3 protocol to encrypt the sending of

passwords to the remote e-mail server. Not shown if IMAP4 is selected for

Mailbox type:.

•

Retrieve attachment (not shown if the e-mail protocol is set to POP3) - To

retrieve e-mail with or without attachments.

Retrieve headers - To limit the number of e-mail headers you want to retrieve

to your phone. The options are All and User defined. Used with the IMAP4

protocol only.

Settings for service messages

When you go to Messaging and select Options→ Settings→ Service message, the

following list of settings opens:

•

Service messages - Choose whether or not you want to allow reception of

service messages.

Authentic. needed - Choose if you want to receive service messages only from

authorised sources.

103

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings for Cell broadcast

Check with your service provider whether Cell broadcast is available and what the

available topics and related topic numbers are. Go to Messaging→ Options→

Settings→ Cell broadcast to change the settings:

•

Reception - On or Off.

Language - All allows you to receive cell broadcast messages in every possible

language. Selected allows you to choose in which languages you wish to

receive cell broadcast messages. If the language you prefer could not be found

in the list, select Other.

•

Topic detection - If you receive a message that does not belong to any of the

existing topics, Topic detection→ On allows you to save the topic number

automatically. The topic number is saved to the topic list and shown without a

name. Choose Off if you do not want to save new topic numbers automatically.

Settings for the Other folder

Go to Messaging and select Options→ Settings→ Other to open the following list

of settings:

•

Save sent messages - Choose if you want to save a copy of every text message,

multimedia message, or e-mail that you have sent to the Sent items folder.

No. of saved msgs. - Define how many sent messages will be saved to the Sent

items folder at a time. The default limit is 20 messages. When the limit is

reached, the oldest message is deleted.

•

Memory in use - Define the memory store. Choices are phone’s memory or

memory card, if one is used.

104

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Tools

■ Settings

Changing general settings

Go to Menu→ Tools→ Settings.

1. Scroll to a setting group and press

to open it.

2. Scroll to a setting you want to change and press

to:

• switch between options if there are only two

(On/Off),

• open a list of options or an editor,

• open a slider view, press

to increase

or decrease the value, respectively.

You may be able to receive some settings from your

service provider in a short message. See ‘Receiving smart messages’, p. 87.

Phone settings

General

•

Phone language - You can change the language for the display texts in your

phone. This change may also affect the format used for date and time and the

105

Download from Www.Somanuals.com. All Manuals Search And Download.

separators used, for example, in calculations. There are three languages

installed in your phone. If you select Automatic, the phone selects the

language according to the information on your SIM card. After you have

changed the display text language, you must restart the phone.

Note: Changing the settings for Phone language or Writing language

affects every application in your phone and the change remains effective until you

change these settings again.

•

Writing language - You can change the writing language of your phone

permanently. Changing the language affects:

• the characters available when you press any key (

• the predictive text dictionary used, and

• the special characters that are available when you press the

keys.

and

•

Dictionary - To set predictive text input On or Off for all editors in the phone.

Select a language for entering predictive text from the list available. You can

also change this setting when you are in an editor. Press

and select

Dictionary→ Dictionary on or Off.

Welcome note or logo - The welcome note or logo is displayed briefly each

time you switch on the phone. Select Default if you want to use the default

image or animation. Select Text to write a welcome note (max. 50 letters).

Select Image to select a photo or picture from the Gallery.

Orig. phone settings - You can reset some of the settings to their original

values. To do this, you need the lock code. See ‘Security’, p. 117.After resetting

106

Download from Www.Somanuals.com. All Manuals Search And Download.

the settings, the phone may take a longer time to power on. All documents and

files that you have created are left as they are.

Standby mode

•

Left selection key and Right selection key - You can change the shortcuts that

appear over the left and right selection keys in standby mode. In

addition to the applications, you can have the shortcut point to a function, for

example, New message.

Note: You can only have shortcuts to pre-installed applications and

functions.

Display

•

Screen saver timeout - The screen saver is activated when the screen saver

time-out period is over. When the screen saver is active, the display is cleared

and you can see the screen saver bar.

• To deactivate the screen saver press any key.

Call settings

Send my caller ID (network service)

• This network service allows you to set your phone number to be displayed (Yes)

or hidden (No) from the person to whom you are calling. Or, the value may be

set by your network operator or service provider when you make a subscription.

Call waiting (network service)

• The network will notify you of a new incoming call while you have a call in

progress. Select Activate to request the network to activate call waiting,

107

Download from Www.Somanuals.com. All Manuals Search And Download.

Cancel to request the network to deactivate call waiting, or Check status to

check if the function is active or not.

Automatic redial

• When this setting is activated, your phone will make a maximum of ten

attempts to connect the call after an unsuccessful call attempt. Press to stop

automatic redialling.

Summary after call

• Activate this setting if you want the phone to briefly display the duration of

the last call.

Speed dialling

• Select On and the numbers assigned to the speed dialling keys (

)

can be dialled by pressing and holding the key. See ‘Assigning speed dialling

keys’, p. 43.

Anykey answer

• Select On, and you can answer an incoming call by briefly pressing any key,

except

, and

Line in use (network service)

• This setting is shown only if the SIM card supports two subscriber numbers,

that is, two phone lines. Select which phone line (Line 1 or Line 2) you want to

use for making calls and sending short messages. Calls on both lines can be

answered irrespective of the selected line.

108

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: You will not be able to make calls if you select Line 2 and have not

subscribed to this network service.

To prevent line selection, select Line change→ Disable if supported by your SIM

card. To change this setting, you need the PIN2 code.

Connection settings

General information about data connections and access points

Access point - The point where your phone connects to the Internet by way of a

data call or packet data connection. An access point can be provided, for example,

by a commercial Internet service provider (ISP), service provider, or network

operator.

To define settings for access points, go to Settings→ Connection→ Access points.

A data connection is required to connect to an access point. Your phone supports

three kinds of data connections:

• a GSM data call ( ),

• GSM high-speed data call ( ), or

• packet data (GPRS) connection ( ).

There are three different kinds of access points that you can define: MMS access

point, browser access point, and Internet access point (IAP). Check with your

service provider what kind of an access point is needed for the service you wish to

access. You need to set access point settings, if you want to, for example,

• send and receive multimedia messages,

109

Download from Www.Somanuals.com. All Manuals Search And Download.

• send and receive e-mail,

• download Java™ applications,

• use Image upload, or

• browse pages.

See ‘Data connection indicators’, p. 19.

GSM data calls

A GSM data call enables data transmission rates to a maximum of 14.4 kbps. For

availability and subscription to data services, contact your network operator or

service provider.

High speed data call (High Speed Circuit Switched Data, HSCSD)

For availability and subscription to high-speed data services, please contact your

network operator or service provider.

The Settings wizard included in the PC Suite can help you to configure access

point and mailbox settings. You can also copy existing settings, for example, from

your computer to your phone. See the CD-ROM supplied in the sales package.

Note: Sending data in HSCSD mode may drain the phone’s battery faster

than normal voice or data calls, as the phone may send data more frequently to

the network.

Packet data (General Packet Radio Service, GPRS)

Minimum settings needed to make a packet data connection

• You need to subscribe to the GPRS service. For availability and subscription to

GPRS, contact your network operator or service provider.

110

Download from Www.Somanuals.com. All Manuals Search And Download.

• Go to Settings→ Connection→ Access points and select Options→ New

access point→ Use default settings. Fill in the following: Data bearer: GPRS

and Access point name: enter the name given to you by your service provider.

See ‘Creating an access point’, p. 111.

Pricing for packet data and applications

Both the active GPRS connection and the applications used over GPRS require a

fee, for example, using services, sending and receiving data, and short messages.

For more detailed information on fees, contact your network operator or service

provider.

See ‘Viewing the general log’, p. 36. See ‘GPRS data counter’, p. 36.

Creating an access point

Options in the Access points list: Edit, New access point, Delete, Help, and

Exit.

You may have preset access point settings in your phone. Or, you may receive

access point settings over the air from a service provider. See ‘Receiving smart

messages’, p. 87.

If there are no access points defined when you open Access points, you will be

asked if you want to create one.

If there already are access points defined, to create a new access point, select

Options→ New access point and select:

•

Use default settings to use the default settings. Make the needed changes and

press Back to save the settings.

111

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Use existing settings to use existing setting information as the basis for the

new access point settings. A list of existing access points is opened. Select one

and press OK. Access point settings are opened with some fields already filled.

Editing an access point

When you open Access points, the list of already

available access points opens. Scroll to the access

point you want to edit, and press

Options when editing access point settings:

Change, Advanced settings, Help, and Exit.

Access points

Here you can see a short explanation for every setting

that may be needed for different data connections and

access points.

Start to fill in the settings from the top because depending on what data

connection you select (Data bearer) only certain setting fields are available.

•

Connection name - Give a descriptive name for the connection.

Data bearer - The options are GPRS, Data call, and High speed (GSM).

Depending on what data connection you select, only certain setting fields are

available. Fill in all fields marked with Must be defined, or with an asterisk.

Other fields can be left empty, unless you have been instructed otherwise by

your service provider.

Note: To be able to use a data connection, the network service provider

must support this feature, and if necessary, activate it for your SIM card.

112

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Access point name (for packet data only) - The access point name is needed to

establish a connection to the GPRS network. You obtain the access point name

from your network operator or service provider.

•

Dial-up number (for Data call and High speed (GSM) only) - The modem

telephone number of the access point.

User name - Write a user name if required by the service provider. The user

name may be needed to make a data connection, and is usually provided by the

service provider. The user name is often case-sensitive.

•

Prompt password - If you must key in a new password every time you log on to

a server, or if you do not want to save your password to the phone, choose Yes.

Password - A password may be needed to make a data connection, and is

usually provided by the service provider. The password is often case-sensitive.

When you are writing the password, the characters you enter are shown briefly

and then changed to asterisks (*). The easiest way to enter numbers is to press

and hold the digit you want to enter, and then continue entering letters.

•

Authentication - Normal / Secure.

Homepage - Depending on what you are setting up, write either:

• the service address, or

• the address of the multimedia messaging centre.

•

Data call type (for GSM data and high speed data only) - Analogue, ISDN v.110,

or ISDN v.120 defines whether the phone uses an analogue or digital

connection. This setting depends on both your GSM network operator and

Internet service provider (ISP), because some GSM networks do not support

113

Download from Www.Somanuals.com. All Manuals Search And Download.

certain types of ISDN connections. For details, contact your ISP. If ISDN

connections are available, they establish connections more quickly than

analogue methods.

•

Maximum data speed (for GSM data and high speed data only) - The options

are Automatic / 9600 / 14400 / 19200 / 28800 / 38400 / 43200, depending on

what you have chosen in Data call type. This option allows you to limit the

maximum connection speed when high speed data is used. Higher data rates

may cost more, depending on the service provider.

Note: The speeds above represent the maximum speed at which your

connection will operate. During the connection, the operating speed may be less,

depending on network conditions.

Options→ Advanced settings

•

Phone IP address - The IP address of your phone.

Primary name server - The IP address of the primary DNS server.

Second. name server - The IP address of the secondary DNS server.

Proxy serv. address - The IP address of the proxy server.

Proxy port number - The port number of the proxy server.

If you need to enter these settings, contact your Internet service provider.

The following settings are shown if you have selected data call and high speed

data as the connection type:

•

Use callback - This option allows a server to call you back once you have made

the initial call. Contact your service provider to subscribe to this service.

114

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: Charges may apply for certain types of received calls, such as

roaming and high speed data calls. Contact your GSM network operator for more

information.

Note: The phone expects the callback call to use the same data call settings

that were used in the callback-requesting call. The network must support that

type of call in both directions, to and from the phone.

•

Callback type - The options are Use server no. / Use other no.. Ask your service

provider for the correct setting to use; it will depend on the service provider’s

configuration.

•

Callback number - Key in your phone’s data phone number which the dial back

server uses. Usually, this number is the data call phone number of your phone.

Use PPP compression - When set to Yes, this option speeds up the data transfer,

if supported by the remote PPP server. If you have problems with establishing a

connection, try setting this to No. Contact your service provider for guidance.

•

Use login script - The options are Yes / No.

Modem initialisation (Modem initialisation string)- Controls your phone using

modem AT commands. If required, enter characters specified by your service

provider or Internet service provider.

GPRS

Go to Settings→ Connection→ GPRS.

The GPRS settings affect all access points using a packet data connection.

115

Download from Www.Somanuals.com. All Manuals Search And Download.

GPRS connection - If you select When available and you are in a network that

supports packet data, the phone registers to the GPRS network and sending short

messages will be done via GPRS. Also, starting an active packet data connection,

for example, to send and receive e-mail, is quicker. If you select When needed, the

phone will use a packet data connection only if you start an application or action

that needs it. The GPRS connection can be closed after it is not used by any

application.

If there is no GPRS coverage and you have chosen When available, the phone will

periodically try to establish a packet data connection.

Access point - The access point name is needed when you want to use your phone

as a packet data modem to your computer. See ‘Using your phone as a modem’,

p. 174.

Data call

Go to Settings→ Connection→ Data call.

The Data call settings affect all access points using a data call and high speed data

call.

Online time - If there are no actions the data call is dropped automatically after a

time-out period. The options are User defined, in which case you enter a time, or

Unlimited.

Date and time

The Date and time settings allow you to define the date and time used in

your phone, as well as change the date and time format and separators.

116

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Clock type→ Analogue or Digital - to change the clock shown in standby

mode. See ‘Clock’, p. 143.

Clock alarm tone - to change the tone played when the clock alarm time is

reached.

Auto time update - to allow the network to update time, date, and time zone

information to your phone (network service). For the Auto time update setting

to take effect, the phone needs to be restarted. Check any alarms as these may

be affected by Auto time update.

•

GMT offset - to change the time zone for the clock time.

Daylight-saving - to set daylight saving time on or off.

Security

Phone and SIM

Explanations for the different security codes that may be needed:

• PIN code (4 to 8 digits) - The PIN (Personal Identification Number) code

protects your SIM card against unauthorised use. The PIN code is usually

supplied with the SIM card.

After three consecutive incorrect PIN code entries, the PIN code is blocked. If

the PIN code is blocked, you need to unblock the PIN code before you can use

the SIM card again. See the information about the PUK code.

• PIN2 code (4 to 8 digits) - The PIN2 code, supplied with some SIM cards, is

required to access some functions.

117

Download from Www.Somanuals.com. All Manuals Search And Download.

• Lock code (5 digits) - The lock code can be used to lock the phone and keypad

to avoid unauthorised use.

Note: The factory setting for the lock code is 12345. To avoid unauthorised

use of your phone, change the lock code. Keep the new code secret and in a safe

place separate from your phone.

• PUK and PUK2 codes (8 digits) - The PUK (Personal Unblocking Key) code is

required to change a blocked PIN code. The PUK2 code is required to change a

blocked PIN2 code. If the codes are not supplied with the SIM card, contact the

operator whose SIM card is in your phone for the codes.

You can change the following codes: lock code, PIN code, and PIN2 code. These

codes can only include the numbers from 0 to 9.

Note: Avoid using access codes similar to emergency numbers, such as 112,

to prevent accidental dialling of the emergency number.

PIN code request - When the PIN code request is active, the code is requested each

time the phone is switched on. Note that deactivating the PIN code request may

not be allowed by some SIM cards.

PIN code / PIN2 code / Lock code - Open this setting if you want to change the

code.

Autolock period - You can set an autolock period, a time-out after which the

phone is automatically locked and can be used only if the correct lock code is

entered. Key in a number for the time-out in minutes or select None to turn off

the autolock period.

• To unlock the phone, key in the lock code.

118

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: When the phone is locked, calls may be possible to the emergency number

programmed into your phone (e.g. 112 or other official emergency number).

Lock if SIM changed - Select Yes if you want the phone to ask for the lock code

when an unknown, new SIM card is inserted into your phone. The phone maintains

a list of SIM cards that are recognised as the owner’s cards.

Fixed dialling - You can restrict your outgoing calls to selected phone numbers, if

supported by your SIM card. You need the PIN2 code for this function. When this

function is active, you can only call those phone numbers that are included in the

fixed dialling list or which begin with the same digit(s) as a phone number on the

list.

• Press

to set Fixed dialling on.

Options in the Fixed dialling view: Open, Call, Activ. fixed dialling/Deact.

fixed dialling, New contact, Edit, Delete, Add to Contacts, Add from Contacts, Find,

Mark/Unmark, Help, and Exit.

Note: When Fixed Dialling is set on, calls may be possible to certain emergency

numbers in some networks (e.g. 112 or other official emergency number).

• To add new numbers to the Fixed dialling list, select Options→ New contact or

Add from Contacts.

Closed user group (network service) - You can specify a group of people to whom

you can call and who can call you. For more information, contact your network

operator or service provider. Select: Default to activate the default group agreed

on with the network operator, On if you want to use another group (you need to

know the group index number), or Off.

119

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: When calls are limited to Closed User Groups, calls may be possible to certain

emergency numbers in some networks (e.g. 112 or other official emergency number).

Confirm SIM services (network service) - To set the phone to display confirmation

messages when you are using a SIM card service.

Delete server - To reset your connection settings allowing you to receive new

settings from your service provider.

Certif. management

In the Certificate management main view, you can see a list of authority

certificates that have been stored in your phone. Press

certificates, if available.

to see a list of personal

Authority certificates are used by some browser services, such as banking

services, for checking signatures or server certificates or other authority

certificates.

Digital certificates are used to verify the origin of browser pages and installed

software. However, they can only be trusted if the origin of the certificate is

known to be authentic.

Options in the certificate management main view: Certificate details,

Delete, Trust settings, Mark/Unmark, Help, and Exit.

Digital certificates may be needed when you, for example:

• want to connect to an online bank or another site or remote server for actions

that involve transferring confidential information, or

• want to decrease the risk of viruses or other malicious software and be sure of

the authenticity of software when downloading and installing software.

120

Download from Www.Somanuals.com. All Manuals Search And Download.

Important: Even if the use of certificates makes the risks involved in remote

connections and software installation considerably smaller, they must be used

correctly in order to benefit from increased security. The existence of a certificate

does not offer any protection by itself; the certificate manager must contain

correct, authentic, or trusted certificates for increased security to be available.

Important: Certificates have a restricted lifetime. If Expired certificate or

Certificate not valid yet is shown even if the certificate should be valid, check that

the current date and time in your phone are correct.

Changing the trust settings of an authority certificate

• Scroll to an authority certificate and select Options→ Trust settings.

Depending on the certificate, a list of the applications that can use the

selected certificate is shown. For example:

Application manager / Yes - the certificate is able to certify the origin of new

software.

Internet / Yes - the certificate is able to certify e-mail and imaging servers.

Important: Before changing these settings, you must make sure that you

really trust the owner of the certificate and that the certificate really belongs to

the listed owner.

Call barring (network service)

Call barring allows you to restrict the making and receiving of calls with

your phone. For this function, you need the barring password, which you

can obtain from your service provider.

121

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Scroll to one of the barring options.

2. Select Options→ Activate to request the network to set call restriction on,

Cancel to set the selected call restriction off, or Check status to check if the

calls are barred or not.

• Select Options→ Edit barrings passw. to change the barring password.

• Select Options→ Cancel all barrings to cancel all active call barrings.

Note: When calls are barred, calls may be possible to certain emergency numbers in

some networks (e.g. 112 or other official emergency number).

Note: Call barring affects all calls, including data calls.

Note: You cannot have barring of incoming calls and call diverting or fixed

dialling active at the same time. See ‘Settings for call diverting’, p. 33.See

‘Security’, p. 117.

Network

Operator selection

• Choose Automatic to set the phone to automatically search for and select one

of the cellular networks available in your area, or

• Choose Manual, if you want to select the desired network manually from a list

of networks. If the connection to the manually selected network is lost, the

phone will sound an error tone and ask you to select a network again. The

selected network must have a roaming agreement with your home network,

that is, the operator whose SIM card is in your phone.

122

Download from Www.Somanuals.com. All Manuals Search And Download.

Cell info display

• Select On to set the phone to indicate when it is used in a cellular network

based on Micro Cellular Network (MCN) technology and to activate cell info

reception.

Enhancement settings

Indicators shown in standby mode:

- a headset is connected.

- a loopset is connected.

Scroll to an enhancement folder and open the settings:

• Select Default profile to select the profile you want to be activated each time

when you connect a certain enhancement to your phone. See ‘Changing the

profile’, p. 129.

• Select Automatic answer to set the phone to answer an incoming call

automatically after five seconds time. If the Incoming call alert is set to Beep

once or Silent, automatic answer cannot be used, and you must answer the

phone manually.

Note: If you are using a loopset, you need to activate it separately.If you

have activated a loopset, the headset will use the same settings as the loopset.

123

Download from Www.Somanuals.com. All Manuals Search And Download.

■ File manager

Go to Menu→ Tools→ File manager

In File manager you can browse, open, and manage

files and folders in the phone memory or on the

memory card, if you use one.

Open File manager to see a list of the folders in the

phone memory. Press

to see the folders on the

memory card, if you use one.

Options in the File manager main view: Open,

Send, Delete, Move to folder, Copy to folder, New

folder, Mark/Unmark, Rename, Find, Receive via

infrared, View details, Memory details, Help, and Exit.

You can browse, open, and create folders, mark, copy and move items to folders.

See ‘Actions common to all applications’, p. 23.

Finding files

You can search for files and folders in the phone memory or memory card, if you

use one, by entering a search text. See ‘Searching for items’, p. 25.

Receiving files via Infrared

Files are automatically received to the root level of the folder structure. Move or

copy them to other folders.

124

Download from Www.Somanuals.com. All Manuals Search And Download.

• Select Options→ Receive via infrared. See ‘Sending and receiving data via

infrared’, p. 170.

Viewing memory consumption

If you have a memory card installed on your phone, you will have a choice of two

memory views, one for the phone memory and one for the memory card.

Press

to move from one memory tab to another.

• To check memory consumption of the current memory select

Options→Memory details.

The phone calculates the approximate amount of free memory for storing data

and installing new applications.

In the memory views, you can view the memory consumption of the different data

groups: Calendar, Contacts, Documents, Messages, Images, Sound files, Video

clips, Applications, Mem. in use, and Free memory.

Note: If the phone memory is getting low, remove some files, or move

them to the memory card. See ‘Troubleshooting’, p. 177.

■ Voice commands

Go to Menu→ Tools→ Voice commands.

You can use Voice commands to start applications and profiles,

and to dial numbers from Contacts, without having to look at your phone’s

display. You record a word, or words, (voice command) and then say this voice

command to open an application, activate a profile, or dial a number.

125

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: You can have only one voice command per item.

Options in the Voice commands main view: Add voice command, Open,

New application, Playback, Change, Delete, Delete all, Help, and Exit.

Any spoken word(s) can be a voice command.

• When recording, hold the phone at a short distance away from your mouth.

After the starting tone, say clearly the word, or words, you want to record as a

voice command.

Before using voice commands, note that:

•

Voice commands are not language dependent. They are dependent on the speaker's

voice.

Voice commands are sensitive to background noise. Record and use them in a quiet

environment.

Very short voice commands are not accepted. Use longer words and avoid similarities

between different voice commands.

Note: You must say the voice command exactly as you said it when you recorded it.

This may be difficult in, for example, a noisy environment or during an emergency, so you

should not rely solely upon voice commands in all circumstances.

126

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding a voice command to an application

1. In the Voice commands main view, scroll to the

application that you want to add a voice command

to, and select Options→ Add voice command.

Note: To add a voice command to a profile,

the Profiles folder must be opened and a specific

profile selected.

2. The text Press ’Start’, then speak after tone is

displayed.

• Press Start to record a voice command. The

phone sounds a starting tone and the note

Speak now is displayed.

3. Say the voice command. The phone will stop recording after approximately 5

seconds.

4. After recording, the phone plays the recorded command and the note Playing

voice command is displayed. If you do not want to save the recording, press

Quit.

5. When the voice command has been successfully saved, the note Voice

command saved is displayed and a beep sounds. A symbol can be seen next

to the application.

Adding an application to the list

Assign voice commands to other applications that are not listed in the Voice

commands main view.

127

Download from Www.Somanuals.com. All Manuals Search And Download.

1. In the Voice commands main view, select Options→ New application.

2. Available applications are displayed. Scroll to the application that you want to

add and press Select.

3. Add a voice command to the new application. See ‘Adding a voice command to

an application’, p. 127.

Starting an application using a voice command

1. In standby mode, press and hold

. A short tone is played and the note

Speak now is displayed.

2. When you are starting an application by saying a voice command, hold the

phone at a short distance away from your mouth and say the voice command

clearly.

3. The phone plays the original voice command and starts the application.

• If the phone plays the wrong voice command, press Retry.

Replaying, erasing, or changing a voice command

To replay, erase, or change a voice command, scroll to the item that has a voice

command (indicated by ), select Options, and then either:

•

Playback - to listen to the voice command again, or

Delete - to erase the voice command, or

Change - to record a new voice command. Press Start to record.

128

Download from Www.Somanuals.com. All Manuals Search And Download.

7. Personalisation

■ Profiles

Go to Menu→ Profiles.

In Profiles, you can adjust and customise the phone

tones for different events, environments, or caller

groups. There are five preset profiles: General, Silent,

Meeting, Outdoor, and Pager, which you can customise

to meet your needs.

You can see the currently selected profile at the top of

the display in standby mode. If the General profile is in

use, only the current date is shown.

The tones can be default ringing tones, tones recorded

in Recorder, tones received in a message, or

transferred to your phone via infrared, Bluetooth, or a PC connection and then

saved to your phone or memory card, if you use one.

Changing the profile

1. Go to Menu→ Profiles. A list of profiles opens.

2. In the Profiles list, scroll to a profile and select Options→ Activate.

To change the profile in standby mode, press

, scroll to the profile you want to

activate and press OK.

129

Download from Www.Somanuals.com. All Manuals Search And Download.

Customising profiles

1. To modify a profile, scroll to the profile in the

Profiles list and select Options→ Personalise. A list

of profile settings opens.

2. Scroll to the setting you want to change and press

to open the choices:

•

Ringing tone - To set the ringing tone for voice

calls, choose a ringing tone from the list. When you

scroll through the list, you can stop on a tone to

listen to it before you make your selection. Press

any key to stop the sound. If a memory card is used,

tones stored on it have the

icon next to the tone name. Ringing tones use

shared memory. See ‘Shared memory’, p. 27. You can also change ringing tones

in Contacts. See ‘Adding a ringing tone for a contact card or group’, p. 44.

•

Ringing type - When Ascending is selected, the ringing volume starts from

level one and increases level by level to the set volume level.

Ringing volume - To set the volume level for the ringing and message alert

tones.

•

Message alert tone - To set the tone for messages.

Chat alert tone - To set the tone for instant messages.

Vibrating alert - To set the phone to vibrate at incoming voice calls and

messages.

•

Keypad tones - To set the volume level for keypad tones.

130

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Warning tones - The phone sounds a warning tone, for example, when the

battery is running out of power.

Alert for - To set the phone to ring only upon calls from phone numbers that

belong to a selected contact group. Phone calls coming from people outside

the selected group will have a silent alert. The choices are All calls / (list of

contact groups, if you have created them). See ‘Creating contact groups’, p. 45.

•

Profile name - You can rename a profile and give it any name you want. The

General profile cannot be renamed.

■ Themes

Go to Menu→ Themes

In Themes you can change the look of your phone’s

display by activating a theme. A theme can include the

idle screen wallpaper, colour palette, screen saver, and

icons and background image in ’Go to’. Edit a theme

for more detailed personalisation.

When you open Themes you will see a list of the

available themes. The currently active theme is

indicated by a check mark. Press

to see the themes

on the memory card, if you use one.

Options in the Themes main view: Preview,

Apply, Edit, Copy to mem. card, Copy to phone mem., Theme downloads, Help, and

Exit.

131

Download from Www.Somanuals.com. All Manuals Search And Download.

• To preview a theme, scroll to the theme and select Options→ Preview to view

the theme. Press to activate the theme. You can activate the theme

without previewing it by selecting Options→ Apply from the main view.

Editing themes

Group together elements from other themes, or images from the Gallery to

personalise themes further.

1. Scroll to a theme, select Options→ Edit, and select:

•

Wallpaper - To select an image from one of the available themes, or select

your own image from the Gallery, to use as a background image in standby

mode.

•

Colour palette - To change the colour palette used on the display.

Screen saver - To select what is shown on the

screen saver bar: the time and date or a text you

have written yourself. The location and

background colour of the screen saver bar

changes in one minute intervals. Also, the

screen saver changes to indicate the number of

new messages or missed calls. You can set the

time that elapses before the screen saver is

activated. See ‘Phone settings’, p. 105.

•

Icons- To select a different icon set from any

one of the themes.

132

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: All pre-installed themes have the same icon set.

•

Image in ’Go to’ - To select an image from one of the available themes, or

select your own image from the Gallery, to use as a background image in Go

to.

2. Scroll to the element to edit and select Options→ Change.

3. Select Options→ Set to select the current setting. You can also preview the

selected element by selecting Options→ Preview. Note that you cannot

preview all elements.

Restoring themes

To restore the currently selected theme back to its original settings, select

Options→ Restore orig. theme when editing a theme.

■ Go to

Press Go to in standby mode or go to Menu→ Go to.

Use Go to for storing shortcuts, links to your favourite photos, video

clips, notes, Recorder sound files, browser bookmarks, and saved browser pages.

The default shortcuts:

the current date,

- opens the Notes editor,

- opens the Messaging Inbox.

- opens the Calendar to

133

Download from Www.Somanuals.com. All Manuals Search And Download.

Options in the Go to main view: Open, Edit

shortcut name, Shortcut icon, Delete shortcut, Move,

List view / Grid view, Help, and Exit.

Adding shortcuts

Shortcuts can be added only from pre-installed

applications and functions. Not all applications have

this functionality.

1. Open the application and scroll to the item that

you want to add as a shortcut to Go to.

2. Select Options→ Add to ’Go to’ and press OK.

Note: A shortcut in Go to is automatically updated if you move the item it

is pointing to, for example, from one folder to another.

Using shortcuts:

• To open a shortcut, scroll to the icon and press

. The file is opened in the

corresponding application.

• To delete a shortcut, scroll to the shortcut you want to remove and select

Options→ Delete shortcut. Removing a shortcut does not affect the file it is

referring to.

• To change the shortcut name, select Options→ Edit shortcut name. Write the

new name. This change affects only the shortcut, not the file or item the

shortcut refers to.

134

Download from Www.Somanuals.com. All Manuals Search And Download.

8. Extras

■ Wallet

Go to Menu→ Extras→ Wallet.

Wallet provides you with a storage area for your

personal information, such as credit and debit card

numbers, addresses and other useful data, for

example, user names and passwords.

The information stored in the wallet can be easily

retrieved while browsing to automatically fill in online

forms on browser pages, for example, when the service

asks for credit card details. Data in the wallet is

encrypted and protected with a wallet code that you

define.

You can group wallet data into profiles that can be accessed, for example for

making purchases online.

Due to the nature of the wallet, it will automatically close after 5 minutes. Enter

the wallet code to regain access to the contents. You can change this automatic

time-out period, if required. See ‘Wallet settings’, p. 140.

Options in the wallet main view:Open, Settings, Help, and Exit.

135

Download from Www.Somanuals.com. All Manuals Search And Download.

Entering the wallet code

Each time you open the wallet you will be prompted for a wallet code.

Enter the code that you have created and press OK.

When you open the wallet for the first time, you must create your own access

code:

1. Enter a code of your choice (4 - 10 alphanumeric characters), and press OK.

2. You will be prompted to verify the code. Enter the same code and press OK. Do

not give your wallet code to anyone else.

Note: If you enter the wallet code incorrectly on three consecutive

occasions, the wallet application is blocked for five minutes. The block time

increases if further incorrect wallet codes are entered.

Important: If you forget your wallet code, you will have to reset the code,

and you will lose all information stored in the wallet. See ‘Resetting the wallet and

wallet code’, p. 140.

Storing personal card details

1. Select the Cards category from the main wallet menu and press

2. Select a type of card from the list and press

•

Payment cards - Credit and debit cards

Loyalty cards - Membership and store cards

Online acc. cards - Personal user names and passwords to online services

Address cards - Basic contact details for home/office

136

Download from Www.Somanuals.com. All Manuals Search And Download.

•

User info cards - Customised personal preferences for online services

3. Select Options→ Create new. An empty form opens.

4. Fill in the fields and press Done.

You can also receive card information directly to the phone from a card issuer or

service provider (if they offer this service). You will be notified which category the

card belongs to. Save or discard the card. You can view and rename a saved card,

but you cannot edit it.

You can open, edit or delete the fields in the card. Any changes will be saved upon

exiting.

Options when viewing or editing card details: Delete, Help, and Exit.

Creating personal notes

Personal notes are a means of storing sensitive information, for example, a bank

account number. You can access the data in a personal note from the browser.

You can also send a note as a message.

• Select the Personal notes category from the main wallet menu and press

• Select Options→ Create new. An empty note opens.

• Press

save.

to start writing. Press

to clear characters. Press Done to

137

Download from Www.Somanuals.com. All Manuals Search And Download.

Creating a wallet profile

Once you have stored your personal details, you can combine them together into a

wallet profile. Use a wallet profile to retrieve wallet data from different cards and

categories to the browser.

1. Select the Wallet profiles category from the main wallet menu and press

2. Select Options→ Create new. A new wallet profile form opens.

3. Fill in the fields as indicated below and press Done.

Some of the fields must contain data selected from the wallet. You must save

the data under the relevant category before creating a wallet profile, or the

profile cannot be created.

•

Profile name - Choose and enter a name for the profile.

Payment card - Select a card from the Payment card category.

Loyalty card - Select a card from the Loyalty card category.

Online access card - Select a card from the Online acc. card category.

Shipping address - Select an address from the Address card category.

Billing address - By default this is the same as the Shipping address. If you

require a different address, select one from the Address card category.

•

User info card - Select a card from the User info card category.

Receive e-receipt - Select a destination from the Address card category.

Deliver e-receipt - Select To phone, To e-mail, or To pho. & e-mail.

138

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Phone ID sending - Set to On or Off. Defines whether, or not, your unique

phone identification is sent with the wallet profile (for future development

dependent on RFID-based ticketing).

Retrieving information from wallet to your browser

When using online mobile services supporting the wallet functionality, you can

upload the data stored in your wallet to automatically enter your details into an

online form. For example, by uploading your payment card details you do not need

to key in the card number and expiry date each time you need them (depending on

the content being browsed). Also, you can retrieve your user name and password

stored as an access card when connecting to a mobile service that requires

authentication. See ‘Purchasing an item’, p. 155.

Viewing ticket details

You can receive notifications of tickets purchased online via the browser.

Received notifications are stored in the wallet. To view the notifications:

1. Select the Tickets category from the main wallet menu and press

2. Select Options→ View.

Note: None of the fields within the notification can be modified.

139

Download from Www.Somanuals.com. All Manuals Search And Download.

Wallet settings

Select Options→ Settings from the main wallet menu:

•

Wallet code - Change your wallet code. You will be prompted to enter the

current code, create a new code, and verify the new code.

Phone ID - Set the phone ID code, type, and sending options (for future

development dependent on RFID-based ticketing).

Automatic close - Change the automatic time-out period (1 - 60 minutes).

After the time-out period has elapsed, the wallet code must be re-entered to

gain access to the contents.

Resetting the wallet and wallet code

To reset both the contents of the wallet and the wallet code:

1. Key in *#7370925538# in standby mode.

2. Enter the phone’s lock code, and press OK. See ‘Security’, p. 117.

3. You will be asked to confirm the erasing of data. Press OK.

Note: This operation erases all contents of the wallet.

When opening the wallet again, you must enter a new wallet code. See ‘Entering

the wallet code’, p. 136.

■ Calculator

Go to Menu→ Extras→ Calculator

Options in Calculator: Last result, Memory, Clear screen, Help, and Exit.

140

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Enter the first number of your calculation. Press

to erase a mistake in the

to select it.

and press .

number.

2. Scroll to an arithmetic function and press

3. Enter the second number.

4. To execute the calculation, scroll to

Note: The Calculator has limited accuracy and rounding errors may occur,

especially in long divisions.

• To add a decimal, press

• Press and hold

• Use and

to clear the result of the previous calculation.

to view previous calculations and move in the sheet.

■ Converter

Go to Menu→ Extras→ Converter.

In Converter, you can convert measures such as Length from one unit to

another, for example, Yards to Metres.

Note: The Converter has limited accuracy and rounding errors may occur.

Converting units

Options in Converter : Conversion type, Currency rates (not applicable to

other units), Help, and Exit.

Note: To make currency conversion you must first set the exchange

rate..See ‘Setting a base currency and exchange rates’, p. 142.

141

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Scroll to the Type field and press

to open a list of measures. Scroll to the

measure you want to use and press OK.

2. Scroll to the first Unit field and press

to open a list of available units.

Select the unit from which you want to convert and press OK.

3. Scroll to the next Unit field and select the unit to which you want to convert.

4. Scroll to the first Amount field and key in the value you want to convert. The

other Amount field changes automatically to show the converted value.

Press

to add a decimal and press

for the +, - (for temperature), and E

(exponent) symbols.

Note: The conversion order changes if you write a value in the second

Amount field. The result is shown in the first Amount field.

Setting a base currency and exchange rates

Before you can make currency conversions, you need to choose a base currency

(usually your domestic currency) and add exchange rates.

Note: The rate of the base currency is always 1. The base currency

determines the conversion rates of the other currencies.

1. Select Currency as the measure type and select Options→ Currency rates. A

list of currencies opens and you can see the current base currency at the top.

2. To change the base currency, scroll to the currency (usually your domestic

currency), and select Options→ Set as base curr..

Important: When you change the base currency, all previously set

exchange rates are set to 0 and you need to key in new rates.

142

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Add exchange rates, scroll to the currency, and key in a new rate, that is, how

many units of the currency equal one unit of the base currency you have

selected.

4. After you have inserted all the needed exchange rates, you can make currency

conversions. See ‘Converting units’, p. 141.

■ Notes

Go to Menu→ Extras→ Notes.

You can link notes to Go to and send them to other devices. Plain text files (TXT

format) you receive can be saved to Notes.

• Press

save.

to start to write. Press

to clear letters. Press Done to

■ Clock

Go to Menu→ Extras→ Clock.

Changing clock settings

Options in Clock: Set alarm, Reset alarm, Remove alarm, Settings, Help, and

Exit.

• To change the time or date, select Options→ Settings in Clock.

143

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting an alarm

1. To set a new alarm, select Options→ Set alarm.

2. Enter the alarm time and press OK. When the alarm is active, the

indicator

is shown.

• To cancel an alarm, go to clock and select Options→ Remove alarm.

Turning off the alarm

• Press Stop to turn off the alarm.

• Press any key or Snooze to stop the alarm for five minutes, after which it will

resume. You can do this a maximum of five times.

If the alarm time is reached while the phone is switched off, the phone switches itself on and

starts sounding the alarm tone. If you press Stop, the phone asks whether you want to

activate the phone for calls. Press No to switch off the phone or Yes to make and receive

calls.

Note: Do not press Yes when wireless phone use is prohibited or when it may cause

interference or danger.

Personalising the alarm tone

1. To personalise the alarm tone, select Options→ Settings.

2. Scroll to Clock alarm tone and press

3. When you scroll through the list of tones, you can stop on a tone to listen to it

before you make your selection. Press Select to select the current tone.

144

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Recorder

Go to Menu→ Extras→ Recorder.

The voice recorder allows you to record telephone conversations and

voice memos. If you are recording a telephone conversation, both parties will hear

a tone every five seconds during recording.

Recorded files are stored in the Gallery. See ‘Gallery’, p. 64.

Options in Recorder: Record sound clip, Delete, Rename sound clip, Send,

Go to Gallery, Settings, Add to ’Go to’, Help, and Exit.

Note: Obey all local laws governing recording of calls. Do not use this feature

illegally.

• Select Options→ Record sound clip and scroll to a function and press

- to fast

- to play an opened sound file.

select it. Use:

forward,

- to record,

- to fast rewind, or

- to pause,

- to stop,

■ Games

Go to Menu→ Games.

• To start a game, scroll to the game icon and press

. For instructions on how

to play the game, press Options→ Help.

■ Memory card

For details on inserting a memory card into the phone, see the Getting

Started guide.

145

Download from Www.Somanuals.com. All Manuals Search And Download.

Details of how you can use the memory card with other features and applications

of your phone are given in the sections describing these features and applications.

Options in the memory card: Backup phone mem., Restore from card,

Format mem. card, Memory card name, Set password, Change password, Remove

password, Unlock memory card, Memory details, Help, and Exit.

If you have a memory card, you can use it to store your multimedia files such as

video clips and sound files, photos, messaging data, and to backup information

from your phone’s memory.

Important: Keep all memory cards out of the reach of small children.

Note: Not all memory cards are compatible with this phone. Data stored on

a memory card using another device may be corrupted when you try to use it in

this phone.

Format memory card

Important: All data stored on the memory card will be permanently deleted

when you format it.

You must format a new memory card before you can use it for the first time.

• Select Options→ Format mem. card.

You will be asked to confirm your request and once you confirm, formatting starts.

Backing up and restoring information

To back up information from your phone’s memory to the memory card, select

Options→ Backup phone mem..

146

Download from Www.Somanuals.com. All Manuals Search And Download.

To restore information from the memory card to the phone’s memory, select

Options→ Restore from card.

Note: You can only backup the phone memory and restore it to the same

model of phone.

Memory card password

To set a password to lock your memory card against unauthorised use, select

Options→ Set password.

You will be asked to enter and confirm your password. The password can be up to

eight characters long.

Note: The password is stored in your phone and you don’t have to enter it

again while you are using the memory card on the same phone. If you want to use

the memory card on another phone, you will be asked for the password.

Unlocking a memory card

If you insert another password protected memory card in your phone, you will be

prompted to enter the password of the card. To unlock the card:

• Select Options→ Unlock memory card.

Note: Once the password is removed, the memory card is unlocked and can

be used on another phone without a password.

147

Download from Www.Somanuals.com. All Manuals Search And Download.

Checking memory consumption

You can check the memory consumption of different data groups and the

available memory for installing new applications or software on your memory

card:

• Select Options→ Memory details.

148

Download from Www.Somanuals.com. All Manuals Search And Download.

9. Services and Applications

■ Services (Mobile browser)

Go to Menu→ Services or press and hold

in standby mode.

Various service providers maintain pages specifically designed for

mobile phones, offering services that can be, for example, news, weather reports,

banking, travel information, entertainment, and games. With the mobile browser

you can view these services as WAP pages written in WML, XHTML pages written

in XHTML, or a mixture of both.

Note: Check the availability of services, pricing, and tariffs with your

network operator and/or service provider. Service providers will also give you

instructions on how to use their services.

Basic steps for accessing

• Save the settings that are needed to access the browser service that you want

to use. See ‘Setting up the phone for the browser service’, p. 150.

• Make a connection to the service. See ‘Making a connection’, p. 151.

• Start browsing the web pages. See ‘Browsing’, p. 153.

149

Download from Www.Somanuals.com. All Manuals Search And Download.

• End the connection to the service. See ‘Ending a

connection’, p. 157.

Setting up the phone for the browser

service

Receiving settings in a smart message

You may receive service settings in a special text

message, a so-called smart message, from the network

operator or service provider that offers the service. See

‘Receiving smart messages’, p. 87.For more

information, contact your network operator or service provider, or visit Nokia.com

(www.nokia.com).

Settings may be available, for example, on the website of a network operator or

service provider.

Keying in the settings manually

Follow the instructions given to you by your service provider.

1. Go to Settings→ Connection settings→ Access points and define the settings

for an access point. See ‘Connection settings’, p. 109.

2. Go to Services→ Options→ Add bookmark. Write a name for the bookmark

and the address of the browser page defined for the current access point.

150

Download from Www.Somanuals.com. All Manuals Search And Download.

Making a connection

Once you have stored all the required connection settings, you can access browser

pages.

There are three different ways to access browser pages:

• Select the homepage ( ) of your service provider,

• Select a bookmark from the Bookmarks view, or

• Press the keys

to start to write the address of a browser service.

The Go to field at the bottom of the display is immediately activated and you

can continue writing the address there.

After you have selected a page or written the address, press

download the page. See ‘Data connection indicators’, p. 19.

to start to

Viewing bookmarks

Note: Your phone may have some pre-installed bookmarks for sites not

affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose

to access them, you should take the same precautions, for security or content, as

you would with any site.

In the Bookmarks view, you can see bookmarks pointing to different kinds of

browser pages. Bookmarks are indicated by the following icons:

- The starting page defined for the browser access point. If you use another

browser access point for browsing, the starting page is changed accordingly.

151

Download from Www.Somanuals.com. All Manuals Search And Download.

- The last visited page. When the phone is disconnected from the service, the

address of the last visited page is kept in memory until a new page is visited

during the next connection.

- A bookmark showing the title.

When you scroll through bookmarks, you can see the address of the highlighted

bookmark in the Go to field at the bottom of the display.

Options in the Bookmarks view (when a bookmark or folder is selected): Open,

Download, Back to page, Send, Go to web address / Find bookmark, Add bookmark,

Edit, Delete, Read service msgs., Disconnect, Move to folder, New folder, Mark/

Unmark, Rename, Clear cache, Details, Add to ’Go to’, Settings, Help, and Exit.

Adding bookmarks manually

1. In the Bookmarks view, select Options→ Add

bookmark.

2. Start to fill in the fields. Only the address must be

defined. The default access point is assigned to the

bookmark if no other one is selected. Press

enter special characters such as /, ., :, and @. Press

to clear characters.

3. Select Options→ Save to save the bookmark.

152

Download from Www.Somanuals.com. All Manuals Search And Download.

Browsing

On a browser page, new links appear underlined in

blue and previously visited links in purple. Images that

act as links have a blue border around them.

Options when browsing: Open, Service options,

Bookmarks, History, Go to web address, View image,

Read service msgs., Save as bookmark, Send bookmark,

Reload, Disconnect, Normal display/Vertical display,

Show images, Clear cache, Save page, Find, Details,

Settings, Help, and Exit.

Keys and commands used in browsing

• To open a link, press

• To scroll the view, use the joystick.

• To enter letters and numbers in a field, press the keys

. Press

enter special characters such as /, ., :, and @. Press

to clear characters.

• To go to the previous page while browsing, press Back. If Back is not available,

select Options→ History to view a chronological list of the pages you have

visited during a browsing session. The history list is cleared each time a session

is closed.

• To check boxes and make selections, press

• To retrieve the latest content from the server, select Options→ Reload.

• To open a sublist of commands or actions for the currently open browser page,

select Options→ Service options.

153

Download from Www.Somanuals.com. All Manuals Search And Download.

• Press and hold to disconnect from a browser service and to quit browsing.

Saving bookmarks

• To save a bookmark while browsing, select Options→ Save as bookmark.

• To save a bookmark received in a smart message, open the message in the

Inbox in Messaging and select Options→ Save to bookmarks. See ‘Receiving

smart messages’, p. 87.

Viewing saved pages

Options in the Saved pages view: Open, Back to page, Reload, Delete, Read service

msgs., Disconnect, Move to folder, New folder, Mark/Unmark, Rename, Clear

cache, Details, Add to ’Go to’, Settings, Help, and Exit.

If you regularly browse pages containing information which doesn’t change very

often, you can save and then browse them when offline.

• To save a page, while browsing select Options→Save page.

Saved pages are indicated by the following icon:

- The saved browser page.

In the saved pages view you can also create folders to store your saved browser

pages.

Folders are indicated by the following icon:

- Folder containing saved browser pages.

154

Download from Www.Somanuals.com. All Manuals Search And Download.

• To open the Saved pages view, press

in the

Bookmarks view. In the Saved pages view, press

to open a saved page.

To start a connection to the browser service and to

retrieve the page again, select Options→ Reload.

Note: The phone stays online after you reload

the page.

Downloading

You can download items such as ringing tones, images, operator logos, software,

and video clips through the mobile browser. These items can be provided free or

you can purchase them.

Once downloaded, items are handled by the respective applications on your

phone, for example a downloaded photo will be saved in the Gallery.

Note: Only install software from sources that offer adequate protection against

viruses and other harmful software.

Note: The information or services you have accessed are stored in the cache memory

of the phone. A cache is a buffer memory that is used to store data temporarily. If you have

tried to access or have accessed confidential information requiring passwords (for example,

your bank account), empty the cache of your phone after each use. To empty the cache,

select Options→ Clear cache.

Purchasing an item

To download the item:

155

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Scroll to the link and select Options→ Open .

2. Choose the appropriate option to purchase the item, for example, Buy.

Carefully read all the information provided.

If the online content is compatible, you can use your wallet information to make

the purchase:

1. Select Open wallet. You will be prompted for your wallet code. See ‘Entering

the wallet code’, p. 136.

2. Select the appropriate card category from your wallet.

3. Select Fill in. This will upload the selected wallet information.

If the wallet does not contain all infomation necessary for the purchase, you will

be requested to enter the remaining details manually.

Note: Copyright protections may prevent some images, ringtones and other

content from being copied, modified, transferred, or forwarded.

156

Download from Www.Somanuals.com. All Manuals Search And Download.

Checking an item before downloading

You can see details about an item before you

download it. Details about an item may include the

price, a brief description and size.

• Scroll to the link and select Options→ Open.

Details about the item are displayed on your phone.

• If you want to continue with the downloading,

press Accept, or if you want to cancel the

download, press Cancel.

Ending a connection

• Select Options→ Disconnect, or

• Press and hold to quit browsing and to return to standby mode.

Browser settings

Select Options→ Settings:

•

Default access point - If you want to change the default access point, press

to open a list of available access points. The current default access point is

highlighted. See ‘Connection settings’, p. 109.

•

Show images - Choose if you want to view pictures when you are browsing. If

you choose No, you can later load images during browsing by selecting

Options→ Show images.

157

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Text wrapping - Choose Off if you don’t want the text in a paragraph to

automatically wrap, or On if you do. If text is not wrapped, the ends of lines

may be truncated.

•

Font size - You can choose five text sizes in the browser: Smallest, Small,

Normal, Large, and Largest.

Default encoding - To make sure your browser pages display text characters

correctly, select one of the following: West. Europ. (ISO) for Western European

languages, Unicode (UTF-8), ISO8859-2 for Central European languages,

ISO8859-4 for Baltic languages, ISO8859-5 for Cyrillic based languages,

ISO8859-7 for Greek language, ISO8859-9 for Turkish language, Hebr. (ISO-

Visual) for Hebrew language, and Arabic (ISO) for Arabic language.

•

Cookies - Allow /Reject. You can enable or disable the receiving and sending of

cookies (a means of content providers to identify users and their preferences

for frequently used content).

Conf. DTMF sending - Always / First time only. Choose whether you want to

confirm before the phone sends DTMF tones during a voice call. See ‘Options

during a call’, p. 31.For example, you can make a voice call while you are

viewing a browser page, send DTMF tones while a voice call is in progress, and

save in Contacts a name and phone number from a browser page.

•

Wallet - Choose On if want the wallet to open automatically when a

compatible browser page is opened.

158

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Application manager

Go to Menu→ App. manager

In Application manager you can install new Symbian operating

system applications (SIS files) and Java™ applications (Java MIDlets and MIDlet

suites). You can also update and uninstall applications from the phone, and

monitor the installation history.

Applications in Application manager use shared memory. See ‘Shared memory’,

p. 27.

Options in the Application manager main view: Install, View details, View

certificate, Update, Go to web address, Remove, View log, Send log, Settings, App.

downloads, Help, and Exit.

When you open Application manager, you can see a

list of:

• applications saved in Application manager,

• partially installed applications (indicated by ),

and

• fully installed applications that you can remove

(indicated by ).

Note: You can only use Symbian operating

system applications with a .SIS extension.

Note: Your phone supports J2ME™Java applications. Do not download

PersonalJava™ applications to your phone as they cannot be installed.

159

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing applications - general information

You can install applications that are specifically intended for this phone and

suitable for the Symbian operating system.

Note: If you install an application that is not intended specifically for this

phone, it may function and look different from what was originally intended.

Applications may be downloaded to your phone during browsing, received as

attachments in multimedia messages or e-mails, or recevied via Bluetooth or via

infrared from another device, for example a phone or a compatible PC. If you are

using PC Suite to transfer the application, place it in the Installs folder in the File

manager.

Important: Only install applications from sources that offer adequate protection against

viruses and other harmful software.

To increase protection, the application installation system uses digital signatures

and certificates for applications. Do not install the application if Application

manager gives a security warning during installation.

Important: If you install an application that contains an update or repair to an

existing application, you can only restore the original application if you have the

original application or a full back-up copy of the removed application. To restore

the original application, first remove the updated or repaired application and then

install again from the original application or the back-up copy.

During installation, the phone checks the integrity of the application to be

installed. The phone shows information about the checks being carried out and

you are given options whether to continue or cancel the installation. Once the

phone has checked the integrity of the application, it is installed on your phone.

160

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing applications

• Open Application manager, scroll to the application, and select Options→

Install to start the installation.

• Alternatively, search the phone memory or the memory card, select the

application, and press

to start the installation.

Some applications may give the option of partial installation allowing you to

select the particular components of an application that you want to install.

If you are installing an application without a digital signature or a certificate, the

phone warns you of the risks. Continue installation only if you are absolutely sure

of the origin and contents of the application.

Installing Java™

The .JAR file is required for installation. If it is missing, the phone may ask you to

download it. If there is no access point defined for Application manager, you will

be asked to select one. When you are downloading the .JAR file, you may need to

enter a user name and password to access the server. You obtain these from the

supplier or manufacturer of the application.

• To start a data connection and to view extra information about the

application, scroll to it and select Options→ Go to web address.

• To start a data connection and to check if there is an update available for the

application, scroll to it and select Options→ Update.

161

Download from Www.Somanuals.com. All Manuals Search And Download.

Java settings

• To change the default access point that a Java application uses for

downloading extra data, select Options→Settings→Access point. See ‘Access

points’, p. 112.

• To change the security settings that determine the actions that a Java

application is permitted to do, select Options→Settings.

Note: Not all Java applications permit you to change the security settings.

Removing an application

1. To remove an application, scroll to it and select Options→ Remove.

2. Press Yes to confirm the removal.

Important: If you remove an application, you can only re-install it if you have the

original application or a full backup of the removed application. If you remove an

application, you may no longer be able to open documents created with that

application. If another application depends on the application that you removed,

the other application may stop working. Refer to the documentation of the

installed application for details.

162

Download from Www.Somanuals.com. All Manuals Search And Download.

10. Connectivity

■ Bluetooth connection

Go to Menu → Connectivity→ Bluetooth

You can transfer data from your phone to another

compatible device, for example, a phone, a headset

using Bluetooth technology, or a computer, via

Bluetooth or infrared.

Note: This phone is designed to be compliant

with and to adopt Bluetooth Specification 1.1. However,

interoperability between the phone and other products

with Bluetooth wireless technology depends also on the

profiles and protocols used. For more information on the

compatibility between Bluetooth devices, please consult

your dealer.

Bluetooth technology enables cost-free wireless connections between electronic

devices within a maximum range of 10 metres. A Bluetooth connection can be

used to send images, videos, texts, business cards, calendar notes, or to connect

wirelessly to devices using Bluetooth technology, such as computers.

Since devices using Bluetooth technology communicate using radio waves, your

phone and the other devices do not need to be in direct line-of-sight.

163

Download from Www.Somanuals.com. All Manuals Search And Download.

The two devices only need to be within a maximum of 10 metres of each other,

although the connection can be subject to interference from obstructions such as

walls or from other electronic devices.

Using Bluetooth technology consumes the battery and the phone's operating time

will be reduced. Take this into account when performing other operations with

your phone.

There may be restrictions on using devices using Bluetooth technology. Check

with your local authorities.

Activating Bluetooth application for the first time

When you activate Bluetooth for the first time, you are asked to give a name to

your phone.

Note: After you have set Bluetooth to be active and changed My phone's

visibility to All, your phone and this name can be seen by other users with devices

using Bluetooth technology.

• Write a name (max. 30 letters). If you send data via a Bluetooth connection

before you have given an individual name to your phone, the default name will

be used.

164

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth settings

To modify Bluetooth settings, scroll to the setting you

want to change and press

•

Bluetooth - Select On if you want to use Bluetooth.

If you select Off, all active Bluetooth connections

are ended, and Bluetooth cannot be used for

sending or receiving data.

•

My phone's visibility - If you select Shown to all,

your phone can be found by other devices during

device search. If you select Hidden, your phone

cannot be found by other devices during device

search.

•

My phone’s name - Define a name for your phone. After you have set Bluetooth

to be active and changed My phone's visibility to All, this name can be seen by

other devices.

Sending data via Bluetooth

Note: There can be only one active Bluetooth connection at a time.

165

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Open an application where the item you wish to

send is stored. For example, to send a photo to

another device, open the Gallery application.

2. Scroll to the item you want to send and select

Options→ Send→ Via Bluetooth.

3. The phone starts to search for devices within range.

Devices using Bluetooth technology that are within

range start to appear on the display one by one.

You can see a device icon, the device’s name, the

device type, or a short name. Paired devices are

shown with

. A paired device is one where a Bluetooth connection already

exists between your phone and the other device.

• To interrupt the search, press Stop. The device list freezes and you can start

to form a connection to one of the devices already found.

Note: When searching for devices, some devices may show only the

unique device addresses. To find out the unique address of your phone,

enter the code *#2820# in standby mode.

Note: If you have searched for devices earlier, a list of the devices

that were found previously is shown first. To start a new search, select More

devices. If you switch off the phone, the list of devices is cleared and the

device search needs to be started again before sending data.

4. Scroll to the device you want to connect with and press Select. The item you

are sending is copied to Outbox and the note Connecting is shown.

5. Pairing (if not required by the other device, go to step 6.)

166

Download from Www.Somanuals.com. All Manuals Search And Download.

• If the other device requires pairing before data can be transmitted, a tone

sounds and you are asked to enter a passcode.

• Create your own passcode (1-16 characters long, numeric) and agree with

the owner of the other device to use the same code. This passcode is used

only once and you do not have to memorise it.

• After pairing, the device is saved to the Paired devices view.

6. When the connection has been successfully established, the note Sending data

is shown.

Data received via Bluetooth can be found in the Inbox folder in Messaging. See

‘Inbox - receiving messages’, p. 84.

Note: Pairing means authentication. The users of the devices using

Bluetooth technology should agree together what the passcode is, and use the

same passcode for both devices in order to pair them. Devices that do not have a

user interface have a preset passcode.

Icons for different devices:

- Computer,

- Phone,

- Audio/video, and

- Bluetooth device.

Note: If sending fails, the message or data will be deleted. The Drafts folder

in Messaging does not store messages sent via Bluetooth.

Checking the status of the Bluetooth connection

• When is shown in standby mode, Bluetooth is active.

• When

is blinking, your phone is trying to connect to the other device.

is shown continuously, the Bluetooth connection is active.

167

Download from Www.Somanuals.com. All Manuals Search And Download.

Paired devices view

Pairing with a device makes device searches easier and quicker. Paired devices are

easier to recognise, they are indicated by

Bluetooth main view, press

in the search result list. In the

to open a list of paired devices (

Options in the paired devices view: New paired device, Assign short name,

Set as authorised / Set as unauthorised, Delete, Delete all, Help, and Exit.

Pairing with a device

1. Select Options→ New paired device in the Paired devices view. The phone

starts to search for devices within range. Or, if you have searched for devices

earlier, a list of the devices that were found previously is shown first. To start a

new search, select More devices.

2. Scroll to the device you want to pair with and press Select.

3. Exchange passcodes, see step 5. (Pairing) in the previous section. The device is

added to the Paired devices list.

Cancelling pairing

• In the Paired devices view, scroll to the device whose pairing you want to

cancel and press

the Paired devices list and the pairing is cancelled.

or select Options→ Delete. The device is removed from

• If you want to cancel all pairings, select Options→ Delete all.

Note: If you are currently connected to a device, and delete the pairing

with that device, the pairing is removed and the device connection is terminated,

but the Bluetooth connection remains active.

168

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting a device to be authorised or unauthorised

After you have paired with a device, you can set it to

be authorised or unauthorised:

Unauthorised (default) - Connection requests from

this device need to be accepted separately every time.

Authorised - Connections between your phone and

this device can be made without your knowledge. No

separate acceptance or authorisation is needed. Use

this status for your own devices, for example, your PC,

or devices that belong to someone you trust. The icon

is added next to authorised devices in the Paired

devices view.

• In the Paired devices view, scroll to the device and select Options→ Set as

authorised / Set as unauthorised.

Receiving data via Bluetooth

When you receive data via Bluetooth, a tone sound is played and you are asked if

you want to accept the message. If you accept, the item is placed in the Inbox

folder in Messaging. Messages received via Bluetooth are indicated by

‘Inbox - receiving messages’, p. 84.

. See

Closing the Bluetooth connection

A Bluetooth connection is disconnected automatically after sending or receiving

data.

169

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Infrared connection

Go to Menu→ Connectivity→ Infrared

Via infrared, you can send or receive data such as business cards and calendar

notes to and from a compatible phone or data device.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR

devices. This device is a Class 1 Laser product.

Sending and receiving data via infrared

All items which are received via infrared are placed in the Inbox folder in

Messaging. New infrared messages are indicated by

messages’, p. 84.

. See ‘Inbox - receiving

1. Make sure that the infrared ports of the sending and receiving devices are

pointing at each other and that there are no obstructions between the devices.

The preferable distance between the two devices is one metre at most. To find

the infrared port, see the Keys and parts section in the Getting Started guide.

2. The user of the receiving device activates the infrared port.

To activate the infrared port of your phone to receive data via infrared, go to

Menu→ Connectivity→ Infrared and press

3. The user of the sending device selects the desired infrared function to start

data transfer.

To send data via infrared, select Options→ Send→ via infrared in an

application.

170

Download from Www.Somanuals.com. All Manuals Search And Download.

If data transfer is not started within one minute after the activation of the

infrared port, the connection is cancelled and must be started again.

Note: Windows 2000: To be able to use infrared to transfer files between

your phone and a compatible computer, go to Control Panel and select Wireless

Link. In the Wireless Link File Transfer tab check the Allow others to send files to

your computer using infrared.

Checking the status of the infrared connection

• When

blinks, your phone is trying to connect to the other device or a

connection has been lost.

• When

is shown continuously, the infrared connection is active and your

phone is ready to send and receive data via its infrared port.

■ Connection manager

Go to Menu→ Connectivity→ Connection manager

In Connection manager you can identify the status of

multiple data connections, view details on the amount

of data sent and received, for example, and end

unused connections.

Note: You can view details of data connections

only. Voice calls are not listed.

When you open Connection manager, you can see a

list of:

171

Download from Www.Somanuals.com. All Manuals Search And Download.

• open data connections,

- Data call,

- High sp. GSM,

- GPRS

• the status of each connection, or

• amount of data uploaded and downloaded for each connection (GPRS

connections only), or

• the duration of each connection (GSM and high-speed data connections only).

Note: The actual time invoiced for calls by your service provider may vary, depending

upon network features, rounding-off for billing, and so forth.

Options in the Connection manager main view when there are one or more

connections: Details, Disconnect, Disconnect all, Help and Exit.

Viewing connection details

To view the details of a connection, scroll to a connection and select Options→

Details The following is displayed:

Name - the name of the Internet access point (IAP) in use, or ’Modem connection’

if the connection is a dial-up connection.

Bearer - the type of data connection: Data call, High sp. GSM, or GPRS.

Status - the current status of the connection.

Received - the amount of data, in bytes, received to the phone.

Sent - the amount of data, in bytes, sent from the phone.

Duration - the length of time that the connection has been open.

Speed - the current speed of both sending and receiving data in kB/s (kilobytes per

second).

172

Download from Www.Somanuals.com. All Manuals Search And Download.

Dial-up (GSM) - the dial-up number used, or Name (GPRS) - access point name

used.

Shared (not displayed if the connection is not shared)- the number of applications

using the same connection.

Ending connections

• Scroll to a connection and select Options→ Disconnect to end that connection

only, or

• Select Options→ Disconnect all to close all currently open connections.

■ Connecting your phone to a compatible computer

For further information on how to make a connection to a compatible computer

via infrared or Bluetooth, and how to install PC Suite, see the Installation Guide

for PC Suite on the CD-ROM in the ‘Install’ section. For further information on

how to use PC Suite, see the help function on PC suite.

Using the CD-ROM

The CD-ROM should launch itself after you have inserted it into the CD-ROM drive

of your compatible PC. If not, proceed as follows:

1. Click the Window Start button and select Programs→ Windows Explorer.

2. On the CD-ROM drive, locate a file called setup.exe and double-click it. The

CD-ROM interface opens.

173

Download from Www.Somanuals.com. All Manuals Search And Download.

3. You can find PC Suite in the ‘Install’ section. Double-click ‘PC Suite for Nokia

6600’. The installation wizard will guide you through the installation process.

Using your phone as a modem

Use your phone as a modem to connect to the Internet with a

compatible PC, or to send and receive faxes.

Detailed installation instructions can be found in Quick guide for Modem Options

for Nokia 6600 on the CD-ROM supplied with the phone.

■ Sync - remote synchronisation

Go to Menu→ Connectivity→ Sync

The Sync application enables you to synchronise your

calendar or contacts with various calendar and

address book applications on a compatible computer

or on the Internet. Synchronisation takes place over a

GSM data call or packet data connection.

The synchronisation application uses SyncML

technology for synchronisation. For information on

SyncML compatibility, please contact the supplier of

the calendar or address book application you want to

synchronise your phone data with.

174

Download from Www.Somanuals.com. All Manuals Search And Download.

Creating a new synchronisation profile

Options in the Remote sync main view: Synchronise, New sync profile, Edit

sync profile, Delete, View log, Help, and Exit.

1. If no profiles have been defined, the phone asks you if you want to create a

new profile. Select Yes.

To create a new profile in addition to existing ones, select Options→ New sync

profile. Choose whether you want to use the default setting values or copy the

values from an existing profile to be used as the basis for the new profile.

2. Define the following:

Sync profile name - Write a descriptive name for the profile.

Access point - Select an access point you want to use for the data connection.

Host address - Contact your service provider or system administrator for the

correct values.

Port - Contact your service provider or system administrator for the correct

values.

User name - Your user ID for the synchronisation server. Contact your service

provider or system administrator for your correct ID.

Password - Write your password. Contact your service provider or system

administrator for the correct value.

Press

to select:

Calendar - Select Yes if you want to synchronise your calendar.

175

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote calendar - Enter a correct path to the remote calendar on the server.

Must be defined if the previous setting Calendar has been set to Yes.

Contacts - Select Yes if you want to synchronise your contacts.

Remote contacts - Enter a correct path to the remote address book on the

server. It must be defined if the previous setting Contacts has been set to Yes.

3. Press Done to save the settings.

Synchronising data

In the Sync main view, you can see the different profiles, and what kind of data

will be synchronised: Calendar, Contacts, or both.

1. In the main view, scroll to a profile and select Options→ Synchronise. The

status of the synchronisation is shown at the bottom of the screen.

To cancel synchronisation before it is finished, press Cancel.

2. You are notified when the synchronisation has been completed.

• After synchronisation is complete, press View log or select Options→ View log

to open a log file showing the synchronisation status (Complete or Incomplete)

and how many calendar or contact entries have been added, updated, deleted,

or discarded (not synchronised) in the phone or on the server.

176

Download from Www.Somanuals.com. All Manuals Search And Download.

11. Troubleshooting

Memory low

When one of the following notes is shown, the phone memory is low and you must

delete some data: Not enough memory to perform operation. Delete some data

first. or Memory low. Delete some data. To view what kind of data you have and

how much memory the different data groups consume, go to File manager and

select Options→Memory details.

You may want to delete the following items regularly to avoid memory getting

low:

• messages from the Inbox, Drafts, and Sent folders in Messaging,

• retrieved e-mail messages from the phone memory,

• saved browser pages, and

• images, video clips and sound clips in the Gallery.

If you want to delete contact information, calendar notes, call timers, call cost

timers, game scores, or any other data, go to the respective application to remove

the data.

If you are deleting multiple items and one of the following notes is shown again:

Not enough memory to perform operation. Delete some data first. or Memory low.

Delete some data., try deleting items one by one (starting from the smallest item).

Clearing calendar memory - To remove more than one event at a time, go to the

Month view and select Options→ Delete entry→ and either:

177

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Before date - to delete all calendar notes which take place before a certain

date. Enter the date before which all calendar notes will be deleted, or

All entries - to delete all calendar notes.

Erasing log information - To erase all the log contents, Recent calls register, and

Messaging delivery reports permanently, go to Logs, press , and select

Options→ Clear log or go to Settings→ Log duration→ No log.

Different ways to store data:

• Use PC Suite to take a backup copy of all data to your computer. See

‘Connecting your phone to a compatible computer’, p. 173.

• Send images to your e-mail address and then save the images to your

computer (network service).

• Send data via infrared or Bluetooth to another compatible device.

• Store data on a compatible memory card.

■ Q&A

Camera

• Q: Why do images look smudgy?

A: Check that the camera lens protection window is clean. See ‘Care and

maintenance’, p. 185.

Bluetooth

• Q: Why can’t I end a Bluetooth connection?

178

Download from Www.Somanuals.com. All Manuals Search And Download.

A: If another device is pairing with your phone but not sending data, and leaves

the device connection open, then the only way to disconnect it is to deactivate

the Bluetooth link altogether. Go to Bluetooth and select the setting

Bluetooth→ Off.

• Q: Why can’t I find a device using Bluetooth technology.

A: Check that both have activated Bluetooth.

Check that the distance between the two devices is not over 10 metres or that

there are no walls or other obstructions between the devices.

Check that the other device is not in ‘Hidden’ mode.

Check that both devices are compatible.

Multimedia messaging

• Q: What should I do when the phone tells me that it cannot receive a

multimedia message because memory is full?

A: The amount of memory needed is indicated in the error message: Not

enough memory to retrieve message. Delete some data first. To view what kind

of data you have and how much memory the different data groups consume,

go to File manager and select Options→Memory details.

• Q: How can I end the data connection when the phone starts a data

connection again and again? The notes: Retrieving message or Trying to

retrieve message again are shown briefly. What is happening?

A: The phone is trying to retrieve a multimedia message from the multimedia

messaging centre.

179

Download from Www.Somanuals.com. All Manuals Search And Download.

Check that the settings for multimedia messaging have been defined correctly

and that there are no mistakes in phone numbers or addresses. Go to

Messaging and select Options→ Settings→ Multimedia message.

To stop the phone from making a data connection, you have the following

options. Go to Messaging and select Options→ Settings→ Multimedia

message, and then:

• Select On receiving msg. → Defer retrieval if you want the multimedia

messaging centre to save the message to be retrieved later, for example,

after you have checked the settings. After this change, the phone still needs

to send information notes to the network. When you want to retrieve the

message , select Retr. immediately.

• Select On receiving msg. → Reject message - if you want to reject all

incoming multimedia messages. After this change, the phone needs to send

information notes to the network and the multimedia messaging centre

will delete all multimedia messages that are waiting to be sent to you.

• Select Multimedia reception→ Off - if you want to ignore all incoming

multimedia messages. After this change the phone will not make any

network connections related to multimedia messaging.

Messaging

• Q: Why can’t I select a contact?

A: If you cannot select a contact in the Contacts directory, the contact card

does not have a phone number or an e-mail address. Add the missing

information to the contact card in the Contacts application.

180

Download from Www.Somanuals.com. All Manuals Search And Download.

Calendar

• Q: Why are the week numbers missing?

A: If you have changed the Calendar settings so that the week starts on a day

other than Monday, then the week numbers will not be shown.

Browser services

• Q: No valid access point defined. Define one in Services settings.

A: Insert the proper browser settings. Contact your service provider for

instructions. See ‘Setting up the phone for the browser service’, p. 150.

Log

• Q: Why does the log appear empty?

A: You may have activated a filter, and no communication events fitting that

filter have been logged. To see all events, select Options → Filter→ All

communication.

PC connectivity

• Q: Why do I have problems in connecting the phone to my PC?

A: Make sure that PC Suite is installed and running on your PC. See the

Installation guide for PC Suite on the CD-ROM in the ’Install’ section. For

further information on how to use PC Suite, see the help function of PC suite.

Access codes

• Q: What is my password for the lock code, PIN code, or PUK code?

A: The default lock code is 12345. If you forget or lose the lock code, contact

your phone dealer.

181

Download from Www.Somanuals.com. All Manuals Search And Download.

If you forget or lose a PIN or PUK code, or if you have not received such a code,

contact your service provider.

For information about passwords, contact your access point provider, for

example, a commercial Internet service provider (ISP), service provider, or

network operator.

Application not responding

• Q: How do I close an application that is not responding?

A: Open the application switching window by pressing and holding . Then

scroll to the application, and press

to close the application.

182

Download from Www.Somanuals.com. All Manuals Search And Download.

12. Battery information

■ Charging and Discharging

Your phone is powered by a rechargeable battery.

Note that a new battery's full performance is achieved only after two or three complete

charge and discharge cycles!

The battery can be charged and discharged hundreds of times but it will eventually wear out.

When the operating time (talk-time and standby time) is noticeably shorter than normal, it

is time to buy a new battery.

Use only batteries approved by the phone manufacturer and recharge your battery only with

the chargers approved by the manufacturer. Unplug the charger when not in use. Do not

leave the battery connected to a charger for longer than a week, since overcharging may

shorten its lifetime. If left unused a fully charged battery will discharge itself over time.

Temperature extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose.

Never use any charger or battery that is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object (coin, clip or pen) causes direct connection of the + and - terminals of the battery

(metal strips on the battery) for example when you carry a spare battery in your pocket or

purse. Short- circuiting the terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery. Always try to keep the

battery between 15°C and 25°C (59°F and 77°F). A phone with a hot or cold battery may

183

Download from Www.Somanuals.com. All Manuals Search And Download.

temporarily not work, even when the battery is fully charged. Battery’s performance is

particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire!

Dispose of batteries according to local regulations (e.g. recycling). Do not dispose of as

household waste.

Remove the battery only when the phone is switched off.

184

Download from Www.Somanuals.com. All Manuals Search And Download.

Care and maintenance

Your phone is a product of superior design and craftsmanship and should be treated with

care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this

product for many years.

•

Keep the phone and all its parts and enhancements out of the reach of small children.

Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can

contain minerals that will corrode electronic circuits.

•

Do not use or store the phone in dusty, dirty areas. Its moving parts can be damaged.

Do not store the phone in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

•

Do not store the phone in cold areas. When it warms up (to its normal temperature),

moisture can form inside, which may damage electronic circuit boards.

•

Do not attempt to open the phone. Non-expert handling may damage it.

Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone.

Do not paint the phone. Paint can clog the moving parts and prevent proper operation.

Use a soft, clean and dry cloth to clean the camera lens.

Use only the supplied or an approved replacement antenna. Unauthorised antennas,

modifications or attachments could damage the phone and may violate regulations

governing radio devices.

All of the above suggestions apply equally to your phone, battery, charger or any

enhancement. If any of them are not working properly, take it to your nearest qualified

service facility. The personnel there will assist you and, if necessary, arrange for service.

185

Download from Www.Somanuals.com. All Manuals Search And Download.

Important safety information

■ Traffic Safety

Do not use a hand-held telephone while driving a vehicle. Always secure the phone in its

holder; do not place the phone on the passenger seat or where it can break loose in a

collision or sudden stop.

Remember road safety always comes first!

■ Operating environment

Remember to follow any special regulations in force in any area and always switch off your

phone whenever it is forbidden to use it, or when it may cause interference or danger.

Use the phone only in its normal operating positions.

To maintain compliance with RF exposure guidelines only use Nokia approved

enhancements. When the phone is on and being worn on the body, always use a Nokia

approved carrying case.

Parts of the phone are magnetic. Metallic materials may be attracted to the phone, and

persons with a hearing aid should not hold the phone to the ear with the hearing aid. Always

secure the phone in its holder, because metallic materials may be attracted by the earpiece.

Do not place credit cards or other magnetic storage media near the phone, because

information stored on them may be erased.

■ Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However,

certain electronic equipment may not be shielded against the RF signals from your wireless

phone.

186

Download from Www.Somanuals.com. All Manuals Search And Download.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 20 cm (6 inches) be

maintained between a handheld wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with the

independent research by and recommendations of Wireless Technology Research. Persons

with pacemakers:

•

Should always keep the phone more than 20 cm (6 inches) from their pacemaker when

the phone is switched on;

•

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimise the potential for interference.

If you have any reason to suspect that interference is taking place, switch off your phone

immediately.

Hearing aids

Some digital wireless phones may interfere with some hearing aids. In the event of such

interference, you may want to consult your service provider.

Other medical devices

Operation of any radio transmitting equipment, including cellular phones, may interfere

with the functionality of inadequately protected medical devices. Consult a physician or the

manufacturer of the medical device to determine if they are adequately shielded from

external RF energy or if you have any questions. Switch off your phone in health care

facilities when any regulations posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be sensitive to external RF energy.

187

Download from Www.Somanuals.com. All Manuals Search And Download.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in

motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking

systems, electronic speed control systems, air bag systems). Check with the manufacturer or

its representative regarding your vehicle. You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted facilities

Switch your phone off in any facility where posted notices so require.

■ Potentially explosive atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey

all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in

bodily injury or even death.

Users are advised to switch off the phone when at a refuelling point (service station). Users

are reminded of the need to observe restrictions on the use of radio equipment in fuel depots

(fuel storage and distribution areas), chemical plants or where blasting operations are in

progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They

include below deck on boats; chemical transfer or storage facilities; vehicles using liquified

petroleum gas (such as propane or butane); areas where the air contains chemicals or

particles, such as grain, dust or metal powders; and any other area where you would

normally be advised to turn off your vehicle engine.

188

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Vehicles

Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty

installation or service may be dangerous and may invalidate any warranty which may apply

to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating

properly.

Do not store or carry flammable liquids, gases or explosive materials in the same

compartment as the phone, its parts or enhancements.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do

not place objects, including both installed or portable wireless equipment in the area over

the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly

installed and the air bag inflates, serious injury could result.

Using your phone while in the air is prohibited. Switch off your phone before boarding an

aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of

the aircraft, disrupt the wireless telephone network and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone services

to the offender, or legal action or both.

■ Emergency calls

Important:

This phone, like any wireless phone, operates using radio signals, wireless and landline

networks as well as user-programmed functions. Because of this, connections in all

conditions can not be guaranteed. Therefore you should never rely solely upon any wireless

phone for essential communications (e.g. medical emergencies).

Emergency calls may not be possible on all wireless phone networks or when certain

network services and/or phone features are in use. Check with local service providers.

189

Download from Www.Somanuals.com. All Manuals Search And Download.

To make an emergency call:

1. If the phone is not on, switch it on. Check for adequate signal strength.

Some networks may require that a valid SIM card is properly inserted in the phone.

2. Press as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the

display and ready the phone for calls.

3. Key in the emergency number for your present location (e.g. 112 or other official

emergency number). Emergency numbers vary by location.

4. Press the key

If certain features are in use, you may first need to turn those features off before you can

make an emergency call. Consult this guide and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as

accurately as possible. Remember that your wireless phone may be the only means of

communication at the scene of an accident - do not cut off the call until given permission to

do so.

■ Certification information (SAR)

THIS MODEL PHONE MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not

to exceed the limits for exposure to radiofrequency (RF) energy recommended by The

Council of the European Union. These limits are part of comprehensive guidelines and

establish permitted levels of RF energy for the general population. The guidelines were

developed by independent scientific organisations through periodic and thorough

evaluation of scientific studies. The limits include a substantial safety margin designed to

assure the safety of all persons, regardless of age and health.

The exposure standard for mobile phones employs a unit of measurement known as the

Specific Absorption Rate, or SAR. The SAR limit recommended by The Council of the

190

Download from Www.Somanuals.com. All Manuals Search And Download.

European Union is 2.0 W/kg.* Tests for SAR have been conducted using standard operating

positions with the phone transmitting at its highest certified power level in all tested

frequency bands. Although the SAR is determined at the highest certified power level, the

actual SAR level of the phone while operating can be well below the maximum value. This is

because the phone is designed to operate at multiple power levels so as to use only the

power required to reach the network. In general, the closer you are to a base station

antenna, the lower the power output.

Before a phone model is available for sale to the public, compliance with the European

R&TTE directive must be shown. This directive includes as one essential requirement the

protection of the health and the safety for the user and any other person. The highest SAR

value for this model phone when tested for use at the ear is 0.80 W/kg. While there may be

differences between the SAR levels of various phones and at various positions, they all meet

the EU requirements for RF exposure.

This product meets RF exposure guidelines when used either in the normal use position

against the ear or when positioned at least 1.5 cm away from the body. When a carry case,

belt clip or holder is used for body-worn operation, it should not contain metal and should

position the product at least 1.5 cm away from your body.

* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged

over ten grams of tissue. The limit incorporates a substantial margin of safety to give

additional protection for the public and to account for any variations in measurements. SAR

values may vary depending on national reporting requirements and the network band. For

SAR information in other regions please look under product information at www.nokia.com

191

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Retrieving 90

Viewing 90

Automatic answer 120

Access codes 114

Access points 106

Settings 109

Access points, glossary

explanation 106

Activating loudspeaker 23

Alarm clock 141

Snooze 141

Animations 55

Answering a call 28

Automatic 120

Application manager 156

Applications

Background images 63

Barring calls 118

Battery information 180

Bluetooth 160

Cancelling pairing 165

Closing the connection 166

Connection requests 164

Connection status

indicators 164

Device icons 164

Adding voice commands 124

Installing 158

Java application

settings 159

Pairing 163

Pairing requests 164

Passcode, glossary

explanation 164

Removing files 159

Attachments

Preset passcode 164

Receiving data 166

192

Download from Www.Somanuals.com. All Manuals Search And Download.

Sending data 162

Settings 162

Remote synchronisation 173

Settings 47

Unique device address 163

Browser

Stopping alarms 47

Browser access points, see

Call barring 118

Access points

Connecting 148

Call register

See Log

Ending connections 154

Icons 148

Calling 25

Calls

Service message

settings 100

Service messages 85, 86

WAP pages 146

Answering 28

Conference calls 27

Dialled 32

Diverting 28

XHTML pages 146

Duration 32

Browsing 150

International 25

Missed 31

Options during a call 28

Received 31

Rejecting 28

Calculator 137

Calendar 42

Alarm 47

Settings 104

Alarm tone 47

Settings for diverting 30

Speed dialling 27

Transferring 29

Calendar entry fields 44

Deleting many entries

simultaneously 174

193

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Contacts

directory 26

Camera 50

Conference calls 27

Connecting to a PC 170

Connection

Image types 52

Memory consumption 54

Self-timer 51

Viewing 169

Connection indicators

Bluetooth 164

Settings 52

CD-ROM 170

Data connections 16

Infrared 168

Cell broadcast messages 94

Cell info display 120

Certificates 117

Trust settings 118

Charges

Packet data 108

Clearing memory

Calendar entries 174

Log information 175

Clip

Connection Manager 168

Connection settings 106

Contact cards

Adding voice tags 38

Assigning default numbers

and addresses 37

Assigning speed dialling

numbers 40

Attaching ringing tones 41

Changing voice tags 40, 125

Deleting voice tags 40, 125

Inserting images 36

Listening to

See Video recorder

Clock 140

Alarm 141

Settings 140

Computer connections 170

voice tags 40, 125

Remote synchronisation 173

194

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing ringing tones 41

Voice tags 38

Ending 170

Viewing 169

Contact groups 41

Adding ringing tones 41

Contacts

Data Import

Contacts 49

Date, settings 113

Deleting

Data Import 49

Converter 138

Calendar entries 44

Delivery reports 66

Dialled numbers 32

Digital rights management 152

Display settings 104

Diverting calls 28

Downloading files to the

Gallery 63

Adding exchange rates 140

Converting currencies 139

Converting units 138

Copying

Contacts between the SIM

card and phone memory 36

Text 72

Creating

Contact cards 35

Cutting

Editing

Calendar entries 43

Contact cards 36

Text 68

Text 73

Data connections

Indicators 16

Themes 129

E-mail 79

Settings 106

Data connections to network

Attachments 90

Deleting 92

195

Download from Www.Somanuals.com. All Manuals Search And Download.

Offline 88

Online 87

Fixed dialling 116

Folders

Opening 90

Creating 21

Opening 62

Organising 21

Remote mailbox 86

Retrieving from mailbox 88

Saving attachments 91

Settings 98

Gallery 61

Emergency calls 186

Enhancements

Settings 120

Downloading files from the

Internet 63

Folders 62

Erasing

Picture messages 63

Uploading images 64

Games 142

Log 33

Recent calls register 32

General settings 102

GIF animations 55

Go to 130

Favourites

Adding a shortcut 131

File formats

GPRS

RealOne Player 59

SIS file 156

File manager 121

Files

See Packet data

GPRS connections 169

GSM data connections 169

Finding 121

Opening 62

Handsfree

See Loudspeaker

196

Download from Www.Somanuals.com. All Manuals Search And Download.

Headset 24

Help 19

Infrared 167

Installing applications 158

Installing Java files 158

Internet access points (IAP)

See Access points

Idle state

See Standby mode

Image modes 52

ISP

See Internet service provider

Image server 64

Images 62

Adding to a contact card 36

Full screen 56

Java

Installing Java applications

158

See Applications.

Keyboard shortcuts when

viewing images 56

Memory consumption 54

Moving the focus 56

Rotating 56

Keyguard 24

Wallpapers folder 63

Zooming 56

Language

for writing 103

Listening to messages 26

Lock code 115

Log

Importing data from other Nokia

phones 49

in 45

Indicators 15

Data connections 16

Info service 94

Erasing contents 33

Filtering 33

197

Download from Www.Somanuals.com. All Manuals Search And Download.

Recent calls 31

Settings 34

Loopset

Activating 120

Loudspeaker 23

Activating 23

Format 143

Password 144

Restore 143

Unlock 144

Video clips 143

Memory low

Turning off 24

Troubleshooting 174

Viewing memory

consumption 145

Mailbox 86

Menu 17

Disconnecting 90

Making calls 25

Media files

Menu key 17

Rearranging the main

Menu 18

File formats 59

Mute 60

Playing 59

Messaging

Delivery reports 66

Inbox 81

Main view 65

Messages on the SIM card 93

Multimedia messages 76

My folders 86

Outbox 93

Picture messages 75

Sent folder settings 101

Seek 60

Media gallery 61

Background images 63

Memory

Viewing memory details 122

Memory card 143

Backup 143

Consumption 145

198

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings 95

Online 87

Opening 62

Organising

Menu 18

Text messages 74

Writing e-mail 79

Writing text 68

Missed calls 31

Outbox 93

Mobile browser 146

Modem

Using your phone as a

modem 171

Multimedia messages 76

Creating 77

Playing sounds 83

Viewing 82

Multimedia presentation

Viewing 83

Music files

See Media files

Mute 60

Packet data 107

Connection timer 34

Data counter 34

Pricing 108

Settings 112

Pairing, glossary explanation 164

Password

Memory card 144

Pasting

Text 73

PC Suite 170

Personal notes 134

Personalisation 128

Personalise 128

Alarm 141

Calendar alarm tone 47

Phonebook

My folders 86

Notes 140

Offline 88

199

Download from Www.Somanuals.com. All Manuals Search And Download.

See Contacts

Picture messages 63

Pictures 63

Taking 50

PIN code 114

Data via Bluetooth 166

Data via infrared 167

Ringing tones, Operator

logos, and settings, see

Smart messages

Unblocking 114

Playing media files 59

Predictive text input 70

Tips 71

Recent calls register 31

Call duration 32

Dialled numbers 32

Erasing call lists 32

Turning off 72

Missed calls 31

Prices for packet data 108

Profiles 126

Received calls 31

Recorder, recording sounds 142

Recording video 57

Recording voice commands 124

Recording voice tags 38

Rejecting calls 28

Adding voice tags 124

Renaming 128

Settings 127

Remote mailbox 86

RealOne Player 58

File formats 59

Playing media files 59

Settings 61

Streaming 59

Received calls 31

Receiving

Disconnecting 90

Remote synchronisation 171

Removing an application 159

Removing software 159

Reports 66

Ringing tones 126

200

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding a personal ringing

tone 41

Muting 28

Access codes 114

Security certificates 117

Settings 114

Receiving in a smart

message 84

Settings 127

Seek 60

Self-timer (camera) 51

Sending

Data via Bluetooth 162

Data via infrared 167

Service command editor 94

Service provider for data

connections, glossary

explanation 106

Safety information

Care and maintenance 182

Electronic devices 183

Emergency calls 186

Operating environment 183

Potentially explosive

atmospheres 185

Traffic safety 183

Vehicles 186

Saving wallpapers 63

Screen saver

Settings 104

Services (Mobile browser) 146

Settings 102

Access codes 114

Applications (Java™) 159

Bluetooth 162

Browser service

messages 100

Calendar 47

Call barring 118

Call diverting 30

Camera 52

Files 121

Search field 22

Security

201

Download from Www.Somanuals.com. All Manuals Search And Download.

Certificates 117

Clock 140

Connection 106

Date and time 113

Device settings 102

Display 104

Shortcuts

in Favourites 131

in Images 56

SIM card

Copying names and

numbers 36

E-mail 98

Messages 93

Enhancements 120

Fixed dialling 116

General 102

SIS file 156

Smart messages

Receiving 84

Info service 101

Lock code 115

Log 34

Messaging 95

Messaging, Sent folder 101

PIN code 114

RealOne Player 61

Security 114

Sounds 127

Snooze 141

Software

Removing 159

Transferring a .SIS file to

your phone 157

Sound clips 62

Sound files

See Media files

Sounds 126

Text messages 95

Video recorder 58

Wallet 137

Removing a personal ringing

tone 41

Speed dialling 40

Making calls 27

Shared memory 24

202

Download from Www.Somanuals.com. All Manuals Search And Download.

Standby mode 14

Indicators 15

In a contact card 36

Tickets 136

Settings 104

Stopping

Time, settings 113

To do 48

Alarm clock 141

Calendar alarm 47

Storing data 175

Switching between applications

To-do 48

Tones 126

Traditional text input 68

Transferring calls 29

Troubleshooting 174

Synchronisation

See Remote synchronisation.

SyncML

Unit converter 138

Uploading images 64

USSD commands 94

See Remote synchronisation.

Taking pictures 50

Text input 68

Text messages 74

Writing and sending 74

Text templates 86

Themes 128

Editing 129

Restoring 130

Thumbnails

Video clips 62

See Media files

Video player

See RealOne Player

Video recorder 57

Memory card 58

Saving video clips 58

Settings 58

Viewing

203

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection details 169

GIF animations 55

Multimedia presentations 83

Network data connection

details 169

Wallet 132

Creating a wallet profile 135

Creating personal notes 134

Entering the

Wallet code 133

Reset 137

Retrieving data into

browser 136

Settings 137

Voice commands 122

Adding 124

Starting applications 125

Voice dialling 38

Voice mailbox 26

Changing the number 26

Diverting calls to voice

mailbox 30

Voice messages 26

Voice recorder 142

Voice tags 38

Storing card details 133

Viewing ticket details 136

Wallet code 133

Reset 137

Wallet profile 135

WAP pages

Adding 38

Changing 40, 125

Deleting 40, 125

Listening 40, 125

Making calls 39

Browser 146

Writing 68

Predictive text input 70

Predictive text input, turning

off 72

Volume control 22

Traditional text input 68

204

Download from Www.Somanuals.com. All Manuals Search And Download.

XHTML pages

Browser 146

Zooming 56

205

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Food Warmer ESW48XX User Manual
Miele Washer W 435 E WPS User Manual
Mr Heater Electric Heater MH9BX User Manual
Napoleon Grills Gas Grill P405 PEDESTAL User Manual
Nilfisk ALTO Vacuum Cleaner R 680 P User Manual
Nortel Networks IP Phone IP Phone 2002 User Manual
NXP Semiconductors Switch CBT3126 User Manual
Omnitron Systems Technology Network Card 10AUI T User Manual
Panamax Home Theater System MAX 1500 UPS User Manual
Parkside Paint Sprayer PFS 100 A1 User Manual