Download from Www.Somanuals.com. All Manuals Search And Download.
A: SIM Card memory is in use OR
B: The phone’s internal memory is in use.
A call is in progress.
A data call is in progress.
The phone is in alpha mode.
You have a voice message.
You have a text message. If
flashing, text memory is full.
Memory location,
menu, or option
number. “AL”:
Alternate Line is in
use.
AB
D
Battery charge.
Signal strength.
Menu Memory
These words change; they determine the function of
the keys below them (see previous page).
▲ ▼ scroll the menu and memories. Press and hold
for continual scrolling.
C
Press and hold to clear the display; press once to
delete numbers and characters one at a time.
B
gives dial tone and prompts you to enter a
number; or, “dials” the number on the display.
E
ends a phone call.
A
toggles between alpha mode and numeric mode.
In alpha mode, the number keys enter letters, and the
phone displays the name associated with a phone
number.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ë Ì
Ê
For Rapid Cigarette Lighter Charger and Rapid
Travel Charger
‚ Power connector for Desktop Charger
CHH-2/CHH-2L
ƒ System and data connector for accessories and
desktop chargers
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n te n ts
FCC/INDUSTRY CANADA NOTICE . . . . . . . . . 4
2 . Th e B a tte r y a n d SIM C ar d
.
.
.
.
5
Access Codes . . . . . . . . . . . . . . . . . . . 13
Multiple and Conference Calls . . . . . . . . . . . 17
Message Settings (Menu 2 4) . . . . . . . . . . . 23
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Numbers and Names . . . . . . . . . . . 27
Notepad Memory Locations . . . . . . . . . . . 30
7 . To u c h To n e s
8 . Th e M e n u .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 3 1
. 3 3
.
Menu Summary . . . . . . . . . . . . . . . . . . 34
Menu 2, Messages . . . . . . . . . . . . . . . . 36
Menu 3, Call Forwarding . . . . . . . . . . . . . 36
Menu 4, Phone Settings . . . . . . . . . . . . . 38
Menu 5, Security Options . . . . . . . . . . . . . 41
Menu 6, Duration and Cost . . . . . . . . . . . . 45
Menu 8, Memory Functions . . . . . . . . . . . . 48
Menu 10, In-Call Options . . . . . . . . . . . . . 50
Menu 11, Fax or Data Call . . . . . . . . . . . . 51
Menu 12, Number Editor . . . . . . . . . . . . . 52
Menu 13, Ringing Options . . . . . . . . . . . . 52
Menu 14, Quick Guide . . . . . . . . . . . . . . 53
9 . A c c e s s o r ie s
.
.
.
.
.
.
.
.
.
.
. 5 4
Batteries . . . . . . . . . . . . . . . . . . . . . 55
Rapid Travel Charger (ACH-4U) . . . . . . . . . . 55
Rapid Cigarette Lighter Charger (LCH-2) . . . . . 56
Compact Desktop Charging Stand (CHH-2) . . . 57
Mobile Holder (MBH-6) . . . . . . . . . . . . . . 60
Compact Handsfree Car Kit (CARK-10P) . . . . . 60
Belt Clip (BCC-1) . . . . . . . . . . . . . . . . . 60
Accessories for Data Communications . . . . . . 60
10 . C a r e a n d M a in te n an c e
.
.
.
.
. 6 1
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not use a hand-held telephone while driving a
vehicle. If using a hand-held telephone park the vehicle
before conversing.
Always secure the phone in its holder; do not place the
phone on the passenger seat or where it can break
loose in a collision or sudden stop.
The use of an alert device to operate a vehicle’s lights
or horn on public roads is not permitted.
Remember road safety always comes first!
Op e r a tin g En v ir o n m e n t
Remember to follow any special regulations in force in
any area and always switch off your phone whenever it
is forbidden to use it, or when it may cause interference
or danger.
Operation of any radio transmitting equipment,
including PCS1900 telephones, may interfere with the
functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position.
Users are advised to switch off the phone when at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations are
in progress.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not store or carry flammable liquids, gases or
explosive materials in the same compartments as the
phone, its parts or accessories.
Only qualified personnel should install or service the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate the warranty.
Electronic fuel injection systems, electronic anti-skid
braking systems, electronic cruise control systems and
other electronic systems can malfunction due to the
lack of protection from radio signals.
Check regularly that all PCS1900 phone equipment in a
vehicle is mounted and operating properly.
Switch off your PCS1900 phone when in an aircraft.
The use of PCS1900 telephones in an aircraft may be
dangerous to the operation of the aircraft, disrupt the
PCS1900 network, and is illegal.
Failure to observe these instructions may lead to
suspension or denial of PCS1900 telephone services to
the offender, or legal action or both.
Em e r g e n c y C a lls
IM PORTA N T!
This phone, like any PCS1900 telephone, operates
using radio signals, PCS1900 and landline networks,
and user-programmed functions which cannot
guarantee connection in all conditions. Therefore you
should never rely solely upon any PCS1900 phone for
essential communications (e.g. medical emergencies).
Remember, to make or receive any calls this phone
must be switched on and in a service area with
adequate PCS1900 signal strength. Emergency calls
may not be possible on all PCS1900 networks or when
certain network services and/or phone features are in
use. Check with local service providers.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your PCS1900 phone may be the only
means of communication at the scene of an accident –
do not cut off the call until given permission to do so.
If certain features are in use (such as Key Lock), you
may first need to turn those features off before you can
make an emergency call. Consult this document and
your local PCS1900 service provider.
To M a k e a n Em e r g e n c y C a ll
If phone is not on, press and hold
P.
‚ Press and hold C to clear the display.
ƒ Key in emergency number for your present location
(e.g. 911 or other official emergency number).
„ Press
B
.
If you dial 911
B
during a call, the phone terminates
the current call and attempts to make a call to the
emergency number 911.
Us in g th is Ow n e r ’s M a n u a l
The PCS1900 phone described in this manual is
approved for use in PCS1900 networks. A number of
features included in this guide are called Network
Services. They are special services provided by
PCS1900 service providers.
Before you can take advantage of any of these Network
Services, you must subscribe to them through your
home service provider. You can then activate these
functions as described in this guide. The manual
activation commands for various services are not
presented in this guide (e.g. ∗ and # characters for
activating or deactivating services). The phone
nevertheless is capable of handling commands given in
that form. For these commands please consult with
your service provider.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IM PORTA N T!
Use only accessories approved by the phone
manufacturer. The use of any other types will invalidate
any approval or warranty applying to the telephone, and
may be dangerous. When you disconnect the power
cord of an accessory, grasp and pull the plug, not the
cord.
FC C /IN D USTRY C A N A D A N OTIC E
Your phone may cause TV or radio interference
(e.g. when using telephone in close proximity of
receiving equipment). The FCC/Industry Canada can
require you to stop using your telephone if such
interference cannot be eliminated. If you need
assistance, contact your local dealer.
This device complies with part 15 and 68 of the FCC
rules. Operation is subject to the condition that this
device does not cause harmful interference.
Nickel Cadmium and Nickel Metal Hydride
Batteries must be recycled or disposed of
properly! Must not be disposed of in
municipal waste!
NiCd
NiMH
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2 . Th e B a tte r y a n d SIM C a r d
Th e B a tte r y
Your phone is powered by a rechargeable battery. Use
only batteries approved by the phone manufacturer and
recharge your battery only with the chargers approved
by the manufacturer. See “Important Battery
Information” later in this section.
New batteries must be charged with
the phone off for at least 24 hours
before initial use. A new battery’s full
performance is achieved only after
two or three complete charge and
discharge cycles!
Note: See “Accessories” for more information on
chargers and other accessories.
In s ta llin g a B a tte r y
Re m o v in g a B a tte r y
Switch off the phone before removing the battery.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
C h a r g in g a N e w B a tte r y o r Re c h a r g in g
a B a tte r y
Connect the charger to the phone before plugging the
charger into a standard 120V AC outlet.
The battery segments scroll to
show that the battery is
charging. Allow the battery to
completely charge. See the
“Accessories” chapter for
information on battery
charging times.
Charging is finished when the segments
stop scrolling.
When charging is finished, disconnect
the charger from the AC outlet and from
the phone.
Using the phone near the network’s base
station consumes less power. Keeping the
antenna fully extended whenever possible
maintains the connection to the network with
less power.
D is c h a r g in g th e B a tte r y
Either leave your phone switched on until it turns itself
off or use the battery discharge facility of any approved
accessory available for your phone. The battery can be
charged and discharged hundreds of times but it will
6
Download from Www.Somanuals.com. All Manuals Search And Download.
eventually wear out. When the operating time is
noticeably shorter than normal, it is time to buy a new
battery.
B a tte r y Lo w /Re c h a r g e
A
You get this message and hear
two short beeps when a couple of
minutes of talk time remain. When
no more battery power remains,
BATTERY
LOW
Menu Memory
you get another tone and the
message RECHARGE BATTERY.
The phone switches itself off.
If the message NOT CHARGINGis displayed, charging is
suspended. Check that the battery is not overheated
(over 104°F/40°C), too cold, or connected to a
non-approved charging device. Wait for a while,
connect the charger to the phone again and retry. If
charging still fails, contact your dealer.
Im p o r ta n t B a tte r y In fo r m atio n
For good operation times, discharge the battery from
time to time by leaving your phone switched on until it
turns itself off or by using the battery discharge facility
of any approved accessory available for your phone. Do
not attempt to discharge the battery by any other
means.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a
charger for longer than a week; overcharging may
shorten its life.
If left unused, a fully charged battery will discharge itself
in about a week at room temperature.
It is recommended that you allow your battery to fully
discharge before you recharge it.
When the battery is not in use, store it uncharged in a
cool, dark and dry place.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Temperature extremes affect the ability of your battery
to charge: it may require cooling or warming first.
Do not short circuit the battery. Accidental short
circuiting can occur when a metallic object (e.g. coin,
clip, or pen) causes direct connection of the + and -
terminals of the battery (metal strips on the back of the
battery), for example when you carry a spare battery in
your pocket or purse. Short circuiting the terminal may
damage the battery or the connecting object.
Use the battery only for its intended purpose.
Never use any charger or battery that is damaged or
worn out.
Leaving the battery in hot or cold places, such as in a
closed car in summer or winter conditions, reduces the
capacity and lifetime of the battery. Always try to keep
the battery between 59°F and 77°F (15°C and 25°C).
A phone with a hot or cold battery may temporarily not
work, even if the battery is fully charged. NiMH battery
performance is particularly limited in temperatures
below 14°F (-10°C).
The battery is a sealed unit with no serviceable parts.
Do not attempt to open the case.
Do not dispose of a battery in a fire! Dispose of used
batteries in accordance with local regulations. Recycle!
Th e SIM C ar d
The SIM card and its
contacts can be easily
damaged by
scratches or bending,
so be careful when
C o m e s fr o m yo u r
o p e r a to r ; is r e q u ir e d
fo r p h o n e u s e .
Sto r e s s u b s c r ib e r In fo .
you handle the card.
Pr o v id e s M e m o r y " A " .
Note: Keep all
miniature SIM cards
out of small children’s
reach.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
In s ta llin g th e SIM C a r d
Switch off the phone,
wait for a few
seconds, and remove
the battery before
installing or removing
the SIM card.
2.
Open the cover of the
SIM Card reader and
open the SIM holder.
3.
1.
Slide the card into
the holder. The
beveled corner of the
card faces up and
you should be able to
see the metal
contacts.
Close the holder by pushing it towards the phone.
Pull the catch gently
toward “Lock” (1). When
you are sure that the
holder is firmly engaged,
slide the cover of the
SIM card reader back
1.
into place (2).
2.
PIN a n d PIN 2
C o d e s (4 to 8 d ig its )
A PIN (Personal Identity Number) code comes with the
SIM card. The phone requires this code each time you
switch the phone on if you enable PIN Code Request
(in Menu 5 1).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The PIN2 code comes with some SIM cards and is
required to access some functions, such as charging
unit counters, which must be supported by the SIM
card.
If you enter a wrong PIN or PIN2 code three times in a
row, that PIN or PIN2 code is disabled. You will be
prompted for the PUK code (for the PIN) or the PUK2
code (for the PIN2) and a new PIN or PIN2 code.
PUK a n d PUK 2 C o d e s (a t le a s t 8 d ig its )
The PUK (Personal Unblocking Key) is required to
change a disabled PIN code. The PUK2 code is
required when you want to change a disabled PIN2
code.
If you enter a wrong PUK code ten times in succession,
you cannot use the SIM card any more. Contact your
network operator for a new card.
If you enter a wrong PUK2 code ten times in
succession, you cannot access the functions that
require the PIN2 code. Contact your network operator.
You cannot change the PUK or PUK2 code. If you lose
or do not know the code, contact your network
operator.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3 . Th e B a s ic s
Sw itc h in g On o r Off
Press and hold the
P
button.
When switching on, extend the antenna
fully. As with any other radio transmitting
device, avoid unnecessary contact with
the antenna when the phone is switched
on.
PWR
The phone displays a Reminder Note if you have
programmed one with Menu 9 1. Press Keepto save it
or Eraseto delete it. The phone may also display a
Welcome Message preprogrammed in your SIM card.
If there is not a SIM card in the phone, you will be
prompted to insert it. Switch off the phone and insert
the card. If you get the message INVALID SIM CARD,
contact your dealer or operator.
Sig n a l Str e n g th
The stronger the radio signal, the
better the call quality. The higher the
column on the left side of the phone
display, the better the signal at your
location.
If the signal strength is not good, try
moving the phone slightly. In a building, reception may
be better near a window.
If you are in the service area of a PCS1900 network
that can serve you, the network operator’s name and
the indicator appear.
Note: The phone can make and receive calls only when
it is switched on, has a valid SIM card inserted and is
located in the PCS1900 network’s service area.
However, calls to the emergency number 911 can
usually be made without the SIM card. Check with your
network operator.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
M a k in g a C a ll - M e th o d 1
Note: Whenever Findappears at the bottom of the display,
you can press ▼ or ▲ to scroll through stored numbers.
B
Number:
TALK
Find
Quit
After you key in the number you want to dial (at the
Number:prompt), the phone dials the number.
M a k in g a C a ll - M e th o d 2
Key in
number, or
recall stored
number
TALK
Note: Check with your PCS1900 system operator for
information about when you need to dial a ‘1’ and/or an
area code in addition to the number.
A n s w e r in g a C a ll
Press any key (except
P
,
E, or volume keys).
En d in g a C a ll
END
K e y Lo c k
Key Lock prevents accidental
key presses (e.g. when the
phone is in your pocket). Key
Lock cannot be activated
when the phone is in an office
handsfree kit.
Menu
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Unlock
Un lo c k
To unlock, press the Unlock
key then ∗.
Note: With KEYS LOCKED,
calls may be possible to the emergency number 911.
A n s w e r in g a C all w ith K e y
Lo c k A c tiv e
TALK
During the call the keypad remains
unlocked. After you end the call, Key Lock
becomes active again.
A c c e s s C o d e s
B
Your phone comes with a Security
Code of 12345. See the
description of Menu 5, Security
Options, for details on Security
functions, including how to
Security
code:
OK
Quit
change the Security Code.
If you enter an incorrect security code (CODE ERROR)
five times in a row, the phone won’t accept any entries
for the next five minutes.
If you make a mistake while keying in an access code,
press
C
repeatedly to erase digits one at a time.
Note: Avoid using access codes similar to emergency
numbers such as 911 to prevent accidental dialing of
the emergency number.
See “The Battery and SIM Card” for information about
the PIN, PIN2, PUK, and PUK2 codes. These codes
come with the SIM Card.
N e tw o r k Pa s s w o rd (4 d ig its )
The network password is required by the Restrict Calls
network service only. The network operator gives you
the code. You can change the password in Menu 5.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4 . Fo r Yo u r C o n v e n ie n c e . . .
These extra features can simplify using your phone.
On -Lin e Qu ic k Gu id e
Menu 14 contains on-line descriptions of 11 of the
phone’s functions.
La s t N u m b e r Re d ia l
The display must be clear of
TALK
names or numbers for this to
work.
TALK
To redial any of the last 10 dialed numbers, after you
press , press ▼ until you see the number you
B B
want. The phone dials the number after a few seconds.
1-To u c h D ia lin g
Press and hold key 2 to 8 for a
abc
jkl
def
mno
wxyz
1
4
2
5
8
0
3
6
9
#
few seconds until the call is
started. The phone dials the
number stored in the
corresponding memory location
(2-8).
ghi
pqrs
tuv
7
Note: If you press and hold 1, the
phone dials your voice mailbox number.
Sp e e d D ia lin g
The phone recalls the number
from memory location 1-99,
TALK
1-99
displays it briefly, then dials it.
Note: If you press 1 , the phone dials your voice
mailbox number. If you press 9 , the phone
B
B
attempts to make a call to the emergency number 911.
See the chapter “Using the Memory” for details on
storing numbers.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Em e r g e n c y K e y 9
wxyz
TALK
9
Official emergency numbers vary by location (e.g. 911).
Only one emergency number is programmed into your
phone to be dialed automatically by Emergency Key 9,
which may not be the proper number in all
circumstances.
Vo ic e M a il K e y 1
Hold the key for a few seconds. The phone
dials your voice mailbox number. Note that
1
your voice mailbox number must be stored
in the phone to use this feature. See “Voice
and Text Messages” for details.
In te r n a tio n a l D ia lin g Pr e fix
This creates a “+”, which the
phone recognizes as the
international dialing prefix. Then
enter the complete number and
make the call.
Note: If you use the “+” prefix, you cannot use the
calling card dialing method described in Menu 4 8.
M u tin g /Un m u tin g
th e Ph o n e ’s
M ic r o p h o n e
Send DTMF
Mute
Hold
To get this menu, press and
hold left F (Menu) for few
seconds.
OK
Quit
Muting and unmuting may be
done only during an active call.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
C a llin g Lin e Id e n tific a tio n
The phone may display the caller’s phone number if you
have subscribed to and activated Calling Line
Identification. The phone displays the caller’s name if
you have stored that caller’s name and number, and the
system is able to identify the calling number.
CALL displays when the number is not available.
Note: For information about availability of and
subscription to Calling Line Identification Presentation,
contact your system operator.
Re c e iv e d C a lls Lis t
▼
to see the
The phone automatically stores the
last 10 numbers that have called
you and you’ve answered. You can press
A
caller’s name, if it is available. Press B to dial.
Note: The Received Calls list appears only if supported
by your operator and SIM card.
M is s e d C a lls Lis t
t
The phone automatically
stores the last 10 numbers
that have called you but you haven’t answered.
Note: The phone number of a received or missed call is
displayed only if the PCS1900 system is able to identify
the caller. The phone displays the caller’s name only if
you have stored the calling person’s name and number
in memory.
Note: The Missed Calls list appears only if supported by
your operator and SIM card.
D is tin c t Rin g in g
You may set your phone to ring distinctly when certain
people call. Three different distinct ringing tones are
available.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Store the person’s name and number in your phone
and include either one, two, or three “!” characters
anywhere in the person’s name. Your phone rings
distinctly when there is an incoming call from that
person’s number. The distinct ringing tone depends on
the number of “!” characters you have stored.
For details on storing names and numbers, see the
chapter “Using the Memory”.
Note: Distinct Ringing works only when Calling Line
Identification is active.
M u ltip le a n d C o n fe r e n c e C a lls
The phone lets you have one “active” call and one
“on-hold” call (this is a network service). You can join up
to five calls together to create a conference call. For
subscription information, contact your network operator.
A n s w e r in g a Wa itin g C a ll
To be able to use this feature, you must
subscribe to and activate Call Waiting
TALK
through your network operator. The active
call is put on hold as you answer the waiting call.
M a k in g a C a ll W ith One A lr e a d y in
Pr o g r e s s
Dial or recall from memory the number you want to
call. This puts the current call on hold.
‚ Press
B.
The held call’s identification blinks on the display.
Sw a p p in g A c tiv e a n d
H e ld C a lls
This makes the held call active and the
active call held.
TALK
17
Download from Www.Somanuals.com. All Manuals Search And Download.
En d in g th e A c tiv e C a ll
On ly
TALK
TALK
1
This ends the active call and
retrieves the held call.
En d in g th e H e ld C a ll
On ly
0
This ends the held call only and
has no effect on the active call.
C r e a tin g a C o n fe r e n c e
C a ll
def
TALK
3
You must have an active call and
a held call for this to work. To add
an incoming call to the Conference, press
again.
def
TALK
3
For more information see Menu 10, In-Call Options.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
5 . Vo ic e a n d Te x t M e s s a g e s
Please check with your operator for the availability of
message features.
Note: The Messages menu items appear only if
supported by your operator and SIM card.
Vo ic e M e s s a g e s
When you receive a voice message,
the phone beeps and lights the voice
message indicator (shown).
To C a ll Yo u r Vo ic e M a ilb o x
Hold the key for a few seconds. The phone
1
dials your voice mailbox number. Note that
your voice mailbox number must be stored
in the phone (see below) for this to work.
To Sto r e Yo u r Vo ic e M a ilb o x N u m b e r in
th e Ph o n e
2
A
A
MESSAGES
Memory
Menu
Select Quit
▼▼
▼▼▼▼
4
5
A
A
MESSAGE
SETTINGS
SET VOICE
MAILBOX
NUMBER
Select Quit
Select Quit
▼▼▼▼▼
After the last step, key in your voice mailbox number
and press OK. Once you enter the number, it is used
until you change it again. The voice mailbox number
may be up to 30 digits long.
Note: The voice mailbox may be provided by the
network (and the network operator gives you the
19
Download from Www.Somanuals.com. All Manuals Search And Download.
number to call) or you may use your own answering
machine or voice mailbox number.
Te x t M e s s a g e s
When the text messaging network service is available
and you have subscribed to it, your phone can send,
receive, and store text messages. The text messaging
function is a network service and may not be supported
by your network. Your network operator gives you your
Message Center number (see Menu 2 4 later in this
chapter), which you need to send messages.
The maximum length of a text message is 160
characters. The phone has space for five full-length
messages. NO SPACE: MESSAGE WAITINGmeans
you need to delete current messages from your
memory to make space in the phone for new
messages.
A
Re a d ing Te x t M e s s ag e s
MESSAGE
RECEIVED
When your phone receives a
Short Message Service (SMS)
text message, the message is
stored in the currently-selected
memory (A or B).
Read
Quit
You can read messages immediately with the Readkey,
or Quitand read the message later using Menu 2.
To r e a d m e s s a g e s w ith M e n u 2
2
A
A
MESSAGES
Memory
Menu
Select Quit
▼▼
▼▼
2
5
A
A
READ
1
MESSAGES
NEW
MESSAGE
Select Quit
▼
20
Download from Www.Somanuals.com. All Manuals Search And Download.
▼ scrolls through message screens. Press or press
and hold ▼ to read messages.
The messages are shown in the order that they were
received or stored, and begin with a message header
that shows message status (described below).
NEW:
This is followed by the
receipt date and time.
OLD:
The message has already
been read.
OLD:
OWN OR
EDITED
The message was created
or edited by you.
Option Quit
Th e Op tio n K e y
When you are reading a
message, you can press Option.
Use the ▼ key to scroll through
available options.
Send
Read next
Erase
OK
Quit
Read nextshows the next
message.
Erasedeletes the current
message from memory.
Replysends a reply message to the sender of the
displayed message. Key in your message. Press OKto
send it.
Call backcopies the phone number from the current
message onto the display. You can then dial it or store it
in the normal way.
Editallows you to make changes in the message. ▼
and ▲ move the cursor right and left.
C
deletes single
characters. To save an edited message press Option,
then press ▼ to move the pointer to Storeand press
OK.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Sendsends the message. At the prompt Number:, key
in the recipient’s phone number, or scroll through
numbers in memory with ▼. Press OKwhen the
number you want is displayed. You need to store your
message center phone number (described later in this
section) to send messages.
W r itin g a n d Se n d in g Te x t M e s s a g e s
When you send a text message, the message center
tries to deliver the message to the receiving phone.
If the recipient cannot be reached, the message is
stored in the message center and delivered to the
recipient as soon as the receiving phone is available.
To W r ite a M e s s a g e
2
A
A
MESSAGES
Memory
Menu
Select Quit
▼▼
▼▼▼
3
A
160
A
WRITE
|
MESSAGES
Select Quit
Option Quit
After the last step, key in the message. To include
numbers in the message, press to enter number
A
mode. See “The Memory” chapter for details on how to
enter letters. ▼ and ▲ move the cursor right and left. To
scroll the message quickly, press and hold either ▼ or ▲.
See the previous description of the Optionkey.
If you have not specified the message center number
with Menu 2 4 1, the phone prompts you to do so.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Key it in and press OK. MESSAGE SENTappears after
the message is delivered to the message center.
M e s s a g e Se ttin g s (M e n u 2 4 )
MESSAGE
CENTER
NUMBER
Your network operator
gives you this when you
subscribe to Text
Messaging.
To send text messages, the phone needs to know the
number of your message center. You can either set the
phone number with this menu or enter it when
prompted to do so.
MESSAGES
SENT AS
Text, Fax, X400,
Paging, E-mail, or
Voice
The network may be able to convert your text message
into one of the above formats. The selected format
applies to all messages until you change it. To receive a
converted message, the recipient must have an
appropriate terminal device available.
ACCEPT
Yesor No
REPLY COST
This network service allows the recipient of your
message to send you a reply message at your
expense. The selected option applies to all messages
until you change it.
MESSAGE
VALIDITY
1, 6,or 24 hours; 1
week; or Max. time
This is the amount of time that the messages you send
are stored at the message service center. If the
receiving end cannot be reached within this period of
time, the message is deleted. To find out the Max.
timesetting, contact your network operator.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SET VOICE
MAILBOX
NUMBER
See the first page of
this chapter.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
6 . Th e M e m o r y
The phone uses either the memory locations on the
SIM card (“A”) or those in the phone (“B”). A or B
will appear in the upper left corner of the display.
Use Menu 8 1 to select either Memory A or B.
Memory B holds up to 125 numbers and names.
The capacity of Memory A varies by SIM card
manufacturer.
A lp h a M o d e
To enter names, retrieve numbers based on
names, and view names, press
A. The phone
ABC
displays ABC to indicate that you can use keys
to enter letters as well as numbers, and that
you are viewing names rather than numbers.
A
7
A
7
Dad, Work
214
555 1212
ABC
Menu Memory
Menu Memory
When a name is displayed you can also press
see the associated number.
A
to
To En te r Le tte r s
Put the phone in Alpha mode by pressing
A. You can
then enter letters. See the table on the next page.
Note: If you include one, two, or three “!” characters
(available on the 0 key while in alpha mode) in a stored
name, the phone rings distinctly when receiving calls
from that number. See “For Your Convenience" for
more information about Distinct Ringing.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
One
Tw o
Three
Four
Five
Press Presses Presses Presses Presses
1
2
1
a
d
g
j
1
b
e
h
k
n
q
u
x
1
c
f
1
2
3
4
5
6
s
8
z
1
a
d
g
j
abc
def
ghi
3
4
5
6
7
8
9
i
jkl
mno
pqrs
tuv
l
m
p
t
o
r
m
7
t
v
y
wxyz
w
9
e n te r a n o th e r le tte r fr o m s a m e k e y
- ? ! , . : " ' & $ ( ) 0
0
#
b la n k s p a c e
When entering letters, press and hold the key to switch
between upper and lower case letters. Press
correct a mistake.
C
to
When ABC is not displayed, you can use the ∗ key to
enter these special characters:
∗∗
+, links memory locations or creates the
international dialing prefix
∗∗∗
∗∗∗∗
p, creates a pause
w, causes the phone to wait for input
The identical name may be used only once in memory.
REPLACE? appears when you try to store a name
already in memory.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Sto r in g N u m b e r s a n d N a m e s
B
B
1.
2 .
800
800
555 1212
555 1212
Memory
Find
Menu
Store
Key in number, then
B
B
3 .
4 .
Name:
|
Store
Quit
Store
Quit
Key in name, then
B
B
5 .
6 .
STORE IN
LOCATION
4?
STORED
OK
Quit
You can enter another location number or scroll through
available location numbers with ▼ or ▲ after STORE
IN LOCATION n?. You may group stored numbers,
such as storing family numbers in locations 40-49.
At STORE IN LOCATION n?, you would key in 4∗, and
the phone would store the number in the first available
2-digit location beginning with a 4 (such as 41).
Note: Entering the name in step 4 is optional; you can
just press Storeto not enter a name.
To A d d a N a m e to a Sto r e d Ph o n e
N u m b e r
Recall the number from memory.
‚ Repeat steps 1-4, but key in a name.
ƒ At the STORE IN LOCATION n?prompt, key in the
location number that currently stores the phone
number, then press OK(as in step 5).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
„ At the REPLACE?prompt, press OK.
To C h a ng e th e N u m b e r Sto r e d W ith a
N a m e
Recall the number from memory.
‚ Use the
C
key to erase the current number one
digit at at time.
ƒ Repeat steps 1 and 2 shown in the picture on the
previous page.
„ At the REPLACE?prompt, press OK.
To Er a s e Sto r e d N a m e s a n d N u m b e r s
B
B
1.
2 .
Name:
Memory
Find
Menu
Store
B
B
3 .
4 .
Number:
Name to be
erased:
Store
Quit
Erase
Quit
▼
Do steps 1-4 as shown.
‚ At the prompt shown in step 4, use the ▼ key to
scroll through stored names, OR press
scroll through stored numbers.
A
then
ƒ When you see the name or number to be erased,
press Erase.
Press Quitif you change your mind, or when you are
finished erasing. You may also use Menu 8 4 to erase
names and numbers from memory.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
To Fa s t Sa v e
Key in the number to be saved, then press and hold
Memory.
Re c a llin g N u m b e r s
fr o m M e m o r y
With the display empty,
press ▼ or ▲.
B
B
1.
2 .
12
Memory
Find
Menu
Store
The top right corner of the display shows the location
number.
Re c a llin g N u m b e r s b y M e m o r y Lo c a tio n
Key in the location number (e.g., 12 in the picture)
then press Memorythen Find, OR
‚ Press
B, at the Number: prompt, key in a
location number then press Find. If you use this
method, the phone automatically dials the number
in a few seconds.
Re c a llin g N a m e s
fr o m M e m o r y
Press
or ▲.
A
then press ▼
This method scrolls alphabetically through the stored
names. You may also use the method shown below.
B
B
1.
2 .
Name:
Memory
Find
Menu
Store
29
Download from Www.Somanuals.com. All Manuals Search And Download.
After step 1, you can key in the name, or the first few
letters of the name, and press Find. Scrolling begins
at the alphabetic location closest to the name you enter.
Press ▼ or ▲ to continue scrolling through names.
N o te p a d M e m o r y Lo c a tio n s
The phone can temporarily store up to 10 phone
numbers and associated names in a “Notepad”.
To Sto r e N u m b e r s a n d N a m e s in
N o te p a d
Do steps 1-4 in “Storing Numbers and Names”.
‚ At the STORE IN LOCATION n?prompt, press
# then press OK.
To Re c a ll N u m b e r s
a n d N a m e s in
N o te p a d
Press # then ▼ or ▲.
The top right corner of the display shows the location
number of the notepad (o0 - o9).
To Er a s e N o te p a d M e m o r y
You can erase Notepad Memory by using Menu 01 4.
This also erases the lists of Received Calls, Dialed Calls,
and Missed Calls.
Note: The Notepad memory, as well as the lists of
Received Calls, Dialed Calls, and Missed Calls, are
erased whenever you use a SIM card that is not
included in the phone’s SIM card list. The phone
numbers are also erased when you change the Security
Level (Menu 5 2).
30
Download from Www.Somanuals.com. All Manuals Search And Download.
7 . To u c h To n e s
Your phone is a “Touch Tone” phone. Touch Tones can
be used for many automated phone services such as
checking your bank balance and using voice mailbox
options.
Touch Tones are called “DTMF” (Dual Tone Multi
Frequency) tones in the phone.
Se n d in g In d iv id u a l To u c h To n e s
Pressing the keys during call sends Touch Tones.
Se n d in g a Str in g o f To u c h to n e s
During a call, with the display empty:
Press Menuthen
B.
‚ Press ▼ to scroll through stored numbers.
ƒ Press OKwhen you see the number (string) you
want to send. The phone sends (as DTMF tones)
the digits you recall from memory.
You may also use Menu 10, In-Call Options, to send a
string of DTMF digits.
To s to r e a To u c h To n e s tr in g
Store Touch Tone strings the same way as you store
phone numbers.
To s to r e To u c h To n e
s tr in g s w ith a p h o n e
n u m b e r
∗∗∗ creates a p(pause
character)
∗∗∗∗ creates a w
(wait character)
Key in the phone number
‚ Press ∗∗∗ (p) or ∗∗∗∗ (w)
ƒ Key in the Touch Tone (DTMF) digits
„ Store the number in the normal way
31
Download from Www.Somanuals.com. All Manuals Search And Download.
∗∗∗ creates a “p” (pause) of 2.5 seconds. When you
recall this number sequence from memory and press
B
, the phone dials the phone number, and after the
call is answered, pauses 2.5 seconds, then sends the
DTMF digits. You can add as many “p” characters as
you need.
∗∗∗∗ creates a “w” (wait). When you recall this number
sequence from memory and press
B, the phone
dials the phone number, and after the call is answered,
waits for you to press DTMF. This is handy if you are
calling a number that then prompts you to enter
information, such as your bank account number.
To u c h To n e Se ttin g s in th e Ph o n e
Your phone’s Touch Tones settings are in Menu 4 5,
Auto DTMF Length. This determines the length of each
Touch Tone.
Sets the DTMF tone
length to 100 ms.
Short
Sets the DTMF tone
length to 500 ms.
Long
32
Download from Www.Somanuals.com. All Manuals Search And Download.
8 . Th e M e n u
The phone’s menus and submenus allow you to tailor
the phone to suit your tastes.
Sc r o llin g Th r o u g h th e M e n u s
A
A
View
Menu
▲
▼
Memory
Menu
Quit
To use the Menu, start by pressing the Menu key.
‚ Use the ▼ or ▲ key to scroll through the Menu.
ƒ When you see the Menu you want, press Select.
„ To choose submenus or options, scroll through
them with ▼ or ▲, then press Select to choose.
Quit
To Go B a c k On e Ste p in th e
M e n u s
To Ge t H e lp o n M e n u s
This gives you help on menu items. Press this
to get help and to go to the next screen of help.
ABC
CLR
To Ex it M e n u s W ith o u t M a k in g
C h a ng e s
En te r in g M e n u s b y N u m b e r
The menus, submenus and setting options are
numbered. The number is shown in the display’s top
right corner. Press Menu then the menu number, then
the submenu number, then the setting option number.
Once you reach the menu or submenu you want, you
can also use ▼ or ▲ to see options.
Note: Press the menu, submenu, and setting option
numbers within a couple of seconds of each other
when using this method.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
M e n u Su m m a ry
Note: Items shown with an ∗ appear on the menu ONLY
if supported by your operator and SIM card.
1 Re c e n t C a lls
1 Dialed Calls
4 Ph o n e Se ttin g s
1 Lights
2 Received Calls∗
3 Missed Calls∗
4 Clear All Call Lists
2 Ringing Volume
3 Ringing Tone
4 Keypad Tones
5 Auto DTMF Length
6 Automatic Redial
7 Automatic Answer
8 Calling Card
9 Send Own Number∗
10 Call Waiting∗
2 M e s s a g e s *
1 Listen to Voice Messages∗
2 Read Messages∗
3 Write Messages∗
4 Message Settings∗
1 Message Center
Number∗
11 Restore Factory Settings
12 Menu List
2 Messages Sent As∗
3 Accept Reply Cost∗
4 Message Validity∗
13 Network Selection∗
14 Language
5 Se c u r ity Op tio n s
5 Set Voice Mailbox
Number∗
1 PIN Code Request
2 Security Level
3 Restrict Calls∗
1 Outgoing Calls∗
2 International Calls∗
3 Int. Except to Home
Country∗
4 Incoming Calls∗
5 Incoming Calls if
Roaming∗
3 C a ll Fo r w a r d in g *
1 Forward All Calls∗
2 Forward If Busy∗
3 Forward If Not Answered∗
4 Forward If Out of Reach∗
5 Cancel All Forwarding∗
6 Cancel All
Restrictions∗
4 View Fixed Dialing List∗
5 Fixed Dialing∗
6 Change Access Codes
1 Change Security Code
2 Change PIN Code
3 Change PIN2 Code
4 Change Network
Password∗
34
Download from Www.Somanuals.com. All Manuals Search And Download.
6 D u r a tio n a n d C o s t
1 Call Duration
12 N u m b e r Ed ito r
1 Last Call Duration
2 All Calls Duration
3 Clear Timers
13 Rin g in g Op tio n s
1 Ring
2 Beep Once
3 Silent
4 Vibrate
5 Ring & Vibrate
2 Call Costs∗
1 Last Call Units∗
2 All Calls Units∗
3 Clear Counters∗
3 Call Costs Limit∗
4 Show Costs In∗
14 Qu ic k Gu id e
1 How to Make a Call
2 How to Answer a Call
3 How to Redial
7 Ph o n e Lin e
Se le c tio n *
4 How to Dial
Emergency No.
Selects which line to use.
5 How to Access Voice
Mail
6 How to Store Name
and Number
7 How to Use Memory
8 How to Use In-Call
Operations
8 M e m o r y Fu n c tio n s
1 Memory Selection
2 Memory Status
3 Copy Between Memories
4 Memory Erase Options
5 Display Own Number
9 How to Use
One-Touch Dialing
10 How to Use Key
Lock
9 Pe r s o n a l Re m in d e r s
1 Reminder Note
2 Countdown Timer
11 How to Use Personal
Alert Tone
10 In -C a ll Op tio n s
Mute/Unmute
Hold/Unhold*
Swap*
Drop Call
Send DTMF
Join
Private
11 Fa x o r D a ta C a ll∗
35
Download from Www.Somanuals.com. All Manuals Search And Download.
N e tw o r k Se r v ic e s
Some of the menu functions are network services.
These functions can be utilized only if provided by your
PCS1900 network. To make use of a network service,
you must first subscribe to it. Note that a network service
is specific to the SIM card you are using. If you change
the SIM card and have not purchased the service for
that card, you will not be able to utilize the service.
For availability and subscription, contact your network
operator.
M e n u 0 1, Re c e n t C a lls
This menu gives you access to Dialed Calls, Received
Calls, and Missed Calls which are automatically stored
by the phone. You can also erase these lists with this
menu.
Note: Received Calls and Missed Calls appear only if
supported by your operator and SIM card.
M e n u 2 , M e s s a g e s
See the chapter “Voice and Text Messages” for a
description of the items in this menu.
Note: The Messages menu and all suboptions appear
only if supported by your operator and SIM card.
M e n u 3 , C a ll Fo r w a r d in g
Note: The Call Forwarding menu and all suboptions
appear only if supported by your operator and SIM card.
Enter Menu 3
‚ ▼ to forwarding option (described next) then
Select.
ƒ ▼ to Activate, Cancel, or Status. (Statusis
described on the next page).
„ Press OK.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ If you choose Activatein Step 3, key in the
number to forward to at Number:. You can option-
ally press the ▼ or ▲ key to scroll through stored
numbers until you reach the one you want.
† Press OK.
Fo r w a r d in g Op tio ns
FORWARD ALL CALLSforwards all incoming calls.
FORWARD IF BUSYforwards calls only when you are on
the phone. FORWARD IF NOT ANSWEREDforwards calls
if you don’t answer. FORWARD IF OUT OF REACH
forwards calls if you are out of the serving network.
CANCEL ALL FORWARDINGcancels all active call
forwarding options.
The phone calls the network operator after you make
your selection and asks it to perform the selected
forwarding mode (REQUESTING...). After receiving a
response, the message FORWARDING ACTIVEor
FORWARDING CANCELEDappears. If the request fails,
the phone displays NOT DONE.
Th e Sta tu s Op tio n
If you choose Status, the phone requests informa-
tion from the network (REQUESTING...) then you
get a Viewlistwindow. Press ▼ to the required
call type.
‚ Press Detail.
ƒ ▼ to To numberor Delay, then OK.
To numberoption shows the phone number to which
the calls are currently forwarded. Delayindicates the
period of time after which your incoming calls are
forwarded if unanswered (applicable only to FORWARD
IF NOT ANSWERED).
Note: Instead of using this menu, you may control
call forwarding with manual command strings.
For command strings, contact your network operator.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
M e n u 4 , Ph o n e Se ttin g s
M e n u 4 0 1, Lig h ts
With lights on, the keypad lights come on when you
press a key or have an incoming call, and go off
15 seconds later.
Note: You can turn on the lights for 15 seconds by
pressing
P
quickly regardless of this setting.
M e n u 4 2 , Rin g in g Vo lu m e
You hear each ringing level as you scroll through the
volume levels.
Note: When the phone is using an accessory, this
option sets the ringing volume separately for that
accessory.
M e n u 4 3 , Rin g in g To n e
The phone plays a sample of each pattern as you scroll.
Note: The ringing tone is the same for all accessories.
M e n u 4 4 , K e yp a d To n e s
You can select the volume level or turn off the sound
the phone makes when you press a key.
Note: The keypad tone volume is set separately for
each accessory you use.
M e n u 4 5 , A u to D TM F Le n g th
Auto DTMF is for sending strings of tones rather than
individual tones. This menu determines the length of
DTMF tones.
Shortsets the DTMF tone length to 100 ms. Longsets
the DTMF tone length to 500 ms.
M e n u 4 6 , A u to m a tic Re d ia l
When this is on, your phone redials the number you are
trying to call (if the call didn’t go through) up to
10 times. Press
E
to end the call attempts.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
M e n u 4 7 , A u to m a tic A n s w e r
With this on, the phone answers calls automatically
after one ring. Note that this works with the headset
only when Ringing Option Ringor Ring&Vibra is
selected.
M e n u 4 8 , C a llin g C a r d
If you store Calling Card information in your phone, you
can make automatic Calling Card calls.
To Sto r e a C a llin g C a r d
Enter Menu 4 8.
‚ ▼ to Card.
ƒ Key in security code at Security code:then
press OK.
„ Key in access number at Access Number:then
press OK. To change the text “Card” to the name
of the card you entered, press
A
at the prompt
Access Number:, then key in the card’s name and
press OK.
ꢀ Key in card number at Card ID code:then press
OK.
To change stored calling card information, use the
key.
C
M a k in g C a llin g C a r d C a lls
Key in phone number.
‚ Press and hold
B
for a few seconds until the
phone displays CARD CALL.
ƒ Press OKafter Wait For Tone, Then Press OK
prompt.
Depending on the type of calling card, there may be an
additional prompt, Wait For Tone, Press OK
Again after which you press any key except the
power key or
E.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
You cannot use this method to call numbers beginning
with “+” (the international prefix). Use the actual
international prefix (e.g., 011) to make calling card calls
to international numbers.
M e n u 4 9 , Se n d Ow n N u m b e r
Note: Send Own Number appears only if supported by
your operator and SIM card.
This specifies whether or not to display (i.e., Send) your
phone number to the person you are calling. You must
be subscribed to Temporary Calling Line Identification
Restriction (CLIR) service to use this feature.
Key in the number you are calling.
‚ Enter Menu 4 9, make your choice (Preset, On, or
Off)by pressing OK, then quit the menus.
ƒ Press
B
to make the call.
Presetresets the phone to the default setting (On or
Off) that you have agreed upon with your network
operator. For details, contact your network operator. On
means the number is sent. Offmeans the number is
not sent.
M e n u 4 10 , C a ll Wa iting
Note: Call Waiting appears only if supported by your
operator and SIM card.
If you activate Call Waiting, you receive a tone during a
call to let you know you have a waiting call. To answer
the waiting call, press
B. The current call is put on
hold. See “Multiple and Conference Calls” in “For Your
Convenience” for details on handling two calls.
M e n u 4 11, Re s to r e Fa c to r y Se ttin g s
Menu 4 11 changes these options to the default values:
Automatic Answer, Auto Redial, Keypad Tones, Lights,
Ringing Options, Ringing Tone, and Ringing Volume.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
M e n u 4 12 , M e n u Lis t
If you do not use all of the menu functions frequently,
you may hide some of the menus and submenus.
Completeshows all menu functions. Shortshows only
the major functions. The function numbering is not
affected - the hidden functions are simply skipped.
M e n u 4 13 , N e tw o r k Se le c tio n
Note: Network Selection appears only if supported by
your operator and SIM card.
This menu specifies how the phone should choose a
network when you are roaming, as there may be more
than one network available. The selection you make
stays active until you change it or change the SIM card.
In Manualmode, the phone prompts you to select a
network when it loses contact with its current network.
Press Selectto begin the selection process. If you
press Quit, the phone looks for its current network but
does not repeat the notification.
In Automaticmode, the phone automatically selects
one of the available networks. The phone beeps to
indicate a switch to another network.
M e n u 4 14 , La n g u ag e
You can choose the language your phone uses for all of
its displays. English, French, and Spanish are available.
M e n u 5 , Se c u r ity Op tio n s
Access codes are required for Security Options. The
phone prompts you for the specific access code required.
Note: The default Security Code is 12345.
M e n u 5 1, PIN C o d e Re q u e s t
With this submenu you can set the phone to request a
PIN code when your phone is switched on. Note that
some SIM cards do not allow you to turn the PIN code
request off.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
You must enter the PIN code to change this setting.
M e n u 5 2 , Se c u r ity Le v e l
The three levels of security are None, Memoryand Phone.
The following table summarizes the security levels.
The phone keeps a list of up to five different SIM cards
used with the phone. When the phone asks for a
security code and you enter the correct code, the SIM
card is added to the phone’s SIM card list and the SIM
card becomes an ‘Owner’s card’. The phone also
memorizes which memory - A or B - is selected for use.
Regardless of the selected security level, all temporarily
stored phone numbers are erased when a new SIM
card is installed. On the other hand, these phone
numbers are not erased when a previously used SIM
card is inserted, regardless of the selected security level.
Note: Whenever you change the security level, all
temporarily stored phone numbers are erased.
With the Is Security Code Is Security Code What is Default
setting
below:
required when required when Memory
switching on?
selecting
selection?
Memory B?
None
NO
NO
Previous setting,
or Memory A
when card is
changed.
Memory NO
YES
Previous setting
if Owner Card;
Memory A if
non-Owner Card.
Phone
YES, but only if NO
Same as above.
a non-Owner’s
card is used.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
M e n u 5 3 , Re s tr ic t C a lls
Note: When calls are restricted, calls may be possible
to the emergency number (i.e., 911).
Note: Restrict Calls appears only if supported by your
operator and SIM card.
For each of the restriction options you specify
Activate, Cancel, or Status.
OUTGOING CALLSprevents all outgoing calls.
INTERNATIONAL CALLSprevents all outgoing
international calls. INT EXCEPT TO HOME COUNTRY
prevents outgoing international calls unless they are
directed to your home country.
INCOMING CALLSprevents you from receiving all
incoming calls. INCOMING CALLS IF ROAMING
prevents you from receiving incoming calls if you are
roaming. CANCEL ALL RESTRICTIONScancels all
active call restricting options.
The phone calls the network operator after you make
your selection and asks it to perform the selected
forwarding mode (REQUESTING...). After receiving a
response, the phone ends the call automatically.
If you select Statusthe phone lists the call types (e.g.
voice calls, data calls, fax calls) to which call restricting
applies. Press ▲ or ▼ to scroll through the list.
If you attempt to call a restricted number, the phone
displays Reminder: RESTRICTIONS ON.
Note: Instead of using this menu, you may control call
restricting by using manual command strings. For
required command strings, contact your network
operator.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
M e n u 5 4 , Vie w Fix e d D ia l Lis t
This lets you review the contents of the Fixed Dialing
List created with Menu 5 5.
Enter Menu 5 4 .
‚ ▼ to scroll through the Fixed Dialing List.
ƒ Press OKto exit.
M e n u 5 5 , Fix e d D ia ling
Fixed Dialing allows outgoing calls to a only specific set
of phone numbers (i.e., those you put in a “Fixed
Dialing” list). This function works only with a SIM card
that supports it.
When on, you can call only phone numbers included in
the Fixed Dialing List or those that begin with the same
digit(s) as a number on this list.
For example, if you have the number “55” stored in
your Fixed Dialing List, you can call any phone number
beginning with the number “55”, e.g., 556-7653.
Note: When Fixed Dialing is on, calls may be possible
to the emergency number (i.e. 911).
Numbers shows you the first name included in the list
(or NO PHONE NUMBERSif the list is empty) and gives
you Option. Press ▼ or ▲ to scroll the list; press
A
to
see the associated numbers.
To C r e a te o r M o d ify th e Fix e d D ia ling
Lis t
Enter Menu 5 5.
‚ Key in PIN2 number then press OK.
ƒ ▼ to Numbersthen press OK.
„ Press Option.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ Press ▼ to your choice (Erase all, Add,
Remove, Edit) then press OK.
Erase allpermanently removes all names and phone
numbers from the list. Addadds a name (and a phone
number) to the list. Removeremoves the name (and
phone number) that was on the display when you
pressed Option.
Editallows you to make changes in the name (and the
associated phone number) that was on the display
when you pressed Option.
M e n u 5 6 , C h a ng e A c c e s s C o d e s
Use this to change the following access codes:
Security Code, PIN Code, PIN2 Code, and network
password.
Note: The access codes may only include characters 0
to 9. To change the PIN Code the PIN Code Request
must be turned on in Menu 5 1.
M e n u 6 , D u r a tio n a n d C o s t
M e n u 6 1, C a ll D u r a tio n
You can view LAST CALL DURATION, or ALL CALLS
DURATION. You can also CLEAR CALL TIMERS. ALL
CALLS DURATIONprovides the total duration of calls
made or received with any SIM card that you have used
with the phone.
Note: The actual invoice for calls and services from
your service provider may vary, depending upon
network features, rounding-off for billing, and so forth.
M e n u 6 2 , C a ll C o s ts
Note: Call Costs appears only if supported by your
operator and SIM card.
This service allows you to check the cost of the last or
current call or the total cost of all calls that you have
45
Download from Www.Somanuals.com. All Manuals Search And Download.
made or received since the counters were last reset.
The call cost is shown for each SIM card separately.
Note: The Call Costs function is a network service and
may not be supported by your network. The actual
invoice for calls and services from your service provider
may vary, depending upon network features,
rounding-off for billing, and so forth.
LAST CALL UNITSshows the cost of the last or
current call. ALL CALLS UNITSshows the total cost of
all calls. CLEAR COUNTERSpermanently resets all cost
counters. The PIN2 code is required to clear counters.
M e n u 6 3 , C a ll C o s ts Lim it
Note: Call Costs Limit appears only if supported by
your operator and SIM card.
This allows you to limit the total costs of outgoing calls
to a number of dollars or charging units.
Note: Calls to the emergency number 911 may be
possible even if there are no charging units left.
To Se t a C h ar g in g Lim it
Enter Menu 6 3. The phone requests the PIN2
code. Enter it and press OK.
‚ Press ▲ to reach Setthen press OK.
ƒ Key in the limit in units or dollars. Enter # for a
decimal point.
„ Press OK.
Select Nonein Step 2 to return to unlimited charging.
If you activate the cost limit, the quantity of remaining
charging or currency units is continuously displayed.
When all units have been used, no calls can be made
except for emergency call attempts to the number 911.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
M e n u 6 4 , Sh o w C o s ts In
Note: Show Costs In appears only if supported by your
operator and SIM card.
With this submenu you select whether the call costs
and limits (and the amount of remaining talk time) are
displayed in charging units or dollars.
When you select Currency, you are prompted for the
unit price. Press # to enter a decimal point. Contact
your network operator for charging unit prices. Call
costs and remaining cost units are then displayed in
dollars.
If you select Units, call costs limits and the number of
remaining cost units are shown in charging units.
M e n u 7 , Ph o n e Lin e Se le c tio n
Note: Phone Line Selection appears only if supported
by your operator and SIM card.
Use Menu 7 to select Primaryor Alternate.
You may have two different subscriptions on your SIM
card, each with different services, a unique phone
number, unique voice mailbox number, and separate
call timers. The two lines share the Fixed Dialing List (if
used) and Data Service. Call charging information is
available only for the primary line.
To select which line to use, the phone must be idle.
You cannot swap between lines during a call. The
phone displays AL in the index area of the display if you
are using the Alternate Line.
Only one line can be used at a time, and when that line
is selected, the services for that line are available during
the call. You can receive calls on the non-selected line
only when you do not have any calls active or held.
Each phone line has its own ringing tone. When you
answer the phone, the call is on the non-selected line,
47
Download from Www.Somanuals.com. All Manuals Search And Download.
and the phone returns to the selected line when you
finish the call.
If you replace the SIM card, Menu 7 is automatically set
to Primary.
M e n u 8 , M e m o r y Fu n c tio n s
M e n u 8 1, M e m o r y Se le c tio n
You can select either the SIM card memory (“A”) or the
phone’s internal memory (“B”). See “The Memory” for
details.
M e n u 8 2 , M e m o r y Sta tu s
Enter Menu 8 2.
‚ Press ▼ to see the number of empty locations.
ƒ Press ▼ again to see the number of full locations.
M e n u 8 3 , C o p y B e tw e e n M e m o r ie s
This function allows you to copy numbers and names
between Memory A and Memory B. You can choose to
copy individual numbers (One by One) or all numbers
(Copy all).
If a name is too long to fit in the destination Memory, it
is shortened. This can happen when you copy names
and numbers from Memory B to Memory A.
If you select One by One, you can scroll through the
stored names until the one you want appears, then
press Copy. Once you have copied all of the desired
location, press Quitor
C.
M e m o r y 8 4 , M e m o r y Er a s e Op tio n s
This removes phone numbers and names from the
currently selected memory. You cannot undo the
operation, so be careful!
If you select One by One, you can either enter a name
at the Name to be erased:prompt or press ▼ or ▲
48
Download from Www.Somanuals.com. All Manuals Search And Download.
until the name you want appears. Then press Erase.
If you change your mind, press Quitinstead of Erase.
Press Quitor
C
when you are finished erasing.
Erase allclears all locations.
M e n u 8 5 , D is p la y Ow n N u m b e r
This shows you the phone number(s) assigned to the
current SIM card. Note that some SIM cards do not
show the phone number.
M e n u 9 , Pe r s o n a l Re m in d e r s
M e n u 9 1, Re m ind e r N o te
The Reminder Note displays when the phone is
switched on. The maximum length is 30 characters.
Enter Menu 9 1.
‚ Key in a new message or edit the existing one.
Characters you key in are added to the left of the cur-
sor. Press
C
to delete characters to the left of the cur-
sor. Press ▼ or ▲ to move the cursor right or left.
ƒ Press Option.
„ Press ▼ to reach Storeor Erasethen press OK.
Store stores the new or edited message for later use.
The message is displayed each time you switch the
phone one. Eraseremoves the message from the
display and from the memory.
Next time you switch the phone one, the stored
message displays. Once you have read the message,
press Keepto save it or Eraseto delete it. It displays
each time you turn the phone on until you erase it.
M e n u 9 2 , C o u ntd o w n Tim e r
Enter Menu 9 2.
‚ Key in the time to count down at Set timer:
(appears in h and m) then press OK.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
The phone sounds an alarm and displays COUNTDOWN
COMPLETEDwhen it finishes counting down the amount
of time you enter. The timer stops if the battery runs out
or if you turn the phone off.
To Sto p th e Tim e r B e fo r e it A la r m s
Follow the steps above, but key in 0000 at Set
timer:.
To C le a r th e A la r m W h e n it is So u n d ing
Press OKor any key.
M e n u 10 , In -C a ll Op tio n s
These are options to be used during calls.
Press and hold the Menukey during a call to access
this menu.
‚ Press ▼ to get to the option you want (Mute,
Unmute, Hold, Unhold, Swap, Drop Call, Send
DTMF, Join, Private), then press OK.
Muteor Unmuteswitches off or on the phone’s
microphone. If the phone is connected to a handsfree
desktop charger, Muteturns off the microphone of this
accessory.
Holdallows you to put a currently active call on hold.
Once the new call has been terminated, you can make
the original call active again by selecting Unhold.
Swapmakes a held call active and puts the currently
active call on hold.
Note: The Hold/Unhold and Swap options appear only
if supported by your operator and SIM card.
Drop Callends the currently active call.
Send DTMFtransmits the numbers on the display as
Touch Tones. If there are no numbers on the display,
the phone prompts you to enter a location number.
Enter a location number or use the ▼ or ▲ keys to
50
Download from Www.Somanuals.com. All Manuals Search And Download.
scroll through stored numbers. Press OKwhen the
number you want to send as Touch Tones is displayed.
C o n fe r e n c e C a lls
Joincreates a conference call by joining together an
active call and a held call. Then to add more parties to
the call, put the conference call on hold, create another
call, then select Joinagain. There may be up to 5
parties in a conference call.
Privatelets you have a private conversation with one
party from the conference call. The conference call is
put on hold while you have the private conversation.
After you select Private, the phone displays all
conference call parties. Use ▼ to choose the party with
whom you want the private conversation then press OK.
To rejoin the rest of the conference call, select Join
again.
M e n u 11, Fa x o r D a ta C a ll
Note: Fax or Data Call appears only if supported by
your operator and SIM card.
Your phone supports the sending and receiving of data
via an optional data adapter that connects to the base
of your phone.
If there is no data adapter connected to the phone
when you enter this menu and dial the number, the
message CONNECT TERMINALappears. Check that the
data adapter is properly set up.
The phone automatically recognizes the type of
connected terminal.
To C r e a te a D a ta o r Fa x C o n n e c tio n
Enter Menu 11.
‚ Key in the phone number at Number:or press the
▼ or ▲ keys to scroll through stored numbers until
you reach the one you want.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
ƒ Press OK.
During a transmission, the message DATA CALLor
FAX CALLand the D indicator are displayed. For more
information, refer to any documentation or instructions
supplied with your data adapter, data application, or fax
application.
M e n u 12 , N u m b e r Ed ito r
This function lets you edit a phone number. You can
press
B
to dial the edited number. You can also
store it.
The number you want to edit must be on the display.
‚ Enter Menu 12.
ƒ C removes the digit left of the cursor.
„
▼ moves the cursor right; ▲ moves the cursor left.
Press OKwhen you are finished editing the number.
You can then dial or store the edited number if you
want to.
M e n u 13 , Rin g in g Op tio n s
With this menu you can choose Ring, Beep Once,
Silent, Vibrate, or Ring & Vibra. Note that if you
choose Silent, the phone flashes its lights when you
have an incoming call.
Note: The vibrating option is available only with a
special battery. Consult your dealer.
Note: When the phone is connected to a handsfree
desktop charger, the indication mode is set separately
for that accessory.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
M e n u 14 , Qu ic k Gu id e
Enter Menu 14.
‚ Press ▼ to get to the desired topic then press
Select.
ƒ Press Moreto read help screens.
„ Press Quitwhen you are finished.
The following Help topics are available:
•
•
•
•
•
•
•
•
•
•
•
How to Make a Call
How to Answer a Call
How to Redial
How to Dial Emergency No.
How to Access Voice Mail
How to Store Name and Number
How to Use Memory
How to Use In-Call Operations
How to Use One-Touch Dialing
How to Use Key Lock
How to Use Personal Alert Tone
53
Download from Www.Somanuals.com. All Manuals Search And Download.
9 . A c c e s s o r ie s
An extensive range of accessories is available for your
phone. You can select the accessories that
accommodate your specific communication needs.
For availability of the accessories, please check with
your local dealer.
A few practical rules for accessory
operation:
•
•
•
•
Keep the accessories out of the reach of small
children.
When you disconnect the power cord of any
accessory, grasp and pull the plug, not the cord.
Check regularly that all PCS1900 phone equipment
in a vehicle is mounted and operating properly.
Installation of complex car equipment must be
made by qualified personnel only.
Use only batteries, chargers and accessories approved
by the phone manufacturer. The use of any other types
will invalidate any approval or warranty applying to the
phone, and may be dangerous.
See “The Battery and SIM Card” chapter for important
battery usage information!
54
Download from Www.Somanuals.com. All Manuals Search And Download.
B a tte r ie s
The following table shows battery options that are
available for your phone, charging times with the
ACH-4U or LCH-2 charger, talk times, and standby
times. Consult your dealer for more information.
The charging times are approximate.
C h a r g in g , Sta n d b y, a n d Ta lk Tim e s
Battery
Option
Charging Talk
Standby
Time
Time
Time
Slim BBH-1S 600 mAh
NiMH
1 hour
110 min. 25 hrs.
110 min. 25 hrs.
220 min. 50 hrs.
300 min. 68 hrs.
BBT-1XV Vibrating
600 mAh NiMH
1 hour
Extended BBH-2H
1100 mAh NiCd
2 hours
Ultra Extended BBH-1H 2 hours,
1700 mAh NiMH 30 min.
Note: Battery operation times vary according to signal
conditions, network parameters set by the operator,
and how you use the batteries. Follow the guidelines in
“The Battery and SIM Card.”
Ra p id Tr a v e l C h ar g e r
(A C H -4 U)
This lightweight AC charger can be
used with all battery options. Calls
can be made during charging, even
with a fully discharged battery.
To use the Rapid Travel Charger
(ACH-4U), plug it into a standard
120V AC wall outlet, and connect
the lead from the charger to the base of the phone.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
The charger can also be used together with the
optional Compact Desktop Charging Stand (CHH-2)
and Light Desk Stand (CHH-2L). Approximate charging
times for discharged batteries are shown at the
beginning of this section.
Ra p id C ig ar e tte Lig h te r
C h a r g e r (LC H -2 )
You can charge the phone battery
from your vehicle battery by using
the Rapid Cigarette Lighter Charger
(LCH-2). You can also use the
charger with the Light Desk Stand
(CHH-2L) and the Compact
Desktop Charging Stand (CHH-2).
Calls are possible during charging.
A green light indicates the charger is ready for charging
(when not charging) or finished charging (if it has been
charging). A red light indicates charging. The battery
charging times are the same as those for the Rapid
Travel Charger (ACH-4U).
The input voltage range is from 10 to 30V DC, negative
grounding. Avoid prolonged charging with the Rapid
Cigarette Lighter Charger (LCH-2) when the car engine
is not running; this may cause the battery of your car to
drain. Note also that in some cars the cigarette lighter
plug is not provided with electricity if the ignition is not
switched on.
Fu s e Re p la c e m e n t
The Rapid Cigarette Lighter Charger contains a
protective fuse. The fuse is located in the charger tip.
If the charger does not work, the fuse may be blown, in
which case replace it with a 3 amp. 125 volt fuse.
Never use a fuse with a higher rating.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Lig h t D e s k Sta n d (C H H -2 L)
The Light Desk Stand (CHH-2L)
offers support for the phone
during charging. Used together
with the Rapid Travel Charger
(ACH-4U) or the Rapid Cigarette
Lighter Charger (LCH-2), this
drop-in stand is an economical
choice when you need your
phone close at hand, always
ready for calls.
Charging is indicated by the scrolling battery bars on
the right side of the phone’s display. Charging is
finished when the scrolling stops.
C o m p a c t D e s k to p C h a r g in g Sta n d
(C H H -2 )
The Compact Desktop Charging
Stand (CHH-2) allows you to place
both the phone and a spare battery
for charging at the same time in the
stand. It is compatible with all
battery options.
The charger starts to charge the
spare battery as soon as it has
finished charging the phone battery.
Connect either the Rapid Travel Charger (ACH-4U) or
the Rapid Cigarette Lighter Charger (LCH-2) to the
stand, and then plug the Rapid Travel Charger or Rapid
Cigarette Lighter Charger into a wall outlet or vehicle
respectively. Place the phone and/or the spare battery
in the stand.
To discharge the spare battery, press the blue button
on the stand. When the battery is totally discharged,
recharging starts automatically. (If you wish to stop
discharging, press the button again to start the
57
Download from Www.Somanuals.com. All Manuals Search And Download.
charging right away.) Only the spare battery can be
discharged.
The blinking red light indicates discharging, the
continuous red light indicates recharging and the green
light indicates trickle charging. The phone is ready for
use when the green light appears (check the charge on
the phone display).
The charging times are the same as those for the
Rapid Travel Charger.
H a n d s fr e e D e s k to p C h a r g e r K it
In the U.S., this kit (EDC-20P) consists of the Handsfree
Desktop Charger (CHH-8P) and the AC Adapter
(ACS-6U). In Canada, this kit (CHH-8PK) consists of the
Handsfree Desktop Charger (CHH-8P) and the AC
Adapter (ACS-3U).
As with the Compact Desktop Charging Stand
(CHH-2), you can charge both the phone and the spare
battery at the same time. The spare battery is charged
only after the phone battery is charged.
The HF Desktop Charger offers you a handsfree
microphone and loudspeaker for office use. You may
switch to handsfree and back simply by putting down
or picking up the phone, even during your call.
The stand can be connected only to the AC Adapter
(ACS-6U in the U.S., or ACS-3U in Canada). Connect
the adapter to the back of the stand and then plug the
58
Download from Www.Somanuals.com. All Manuals Search And Download.
adapter into a wall outlet. Place the phone and/or the
spare battery in the stand.
The stand also provides a connector for PCS Card,
Data and Fax facilities. Note that this connector is not
compatible with landline facilities. Do not connect your
landline phone to CHH-8P.
The buttons on the stand are for discharging spare
batteries
, for calling your voice mailbox
, and
for muting the microphone during a call
.
The voice mailbox number must be stored in the
memory of the phone (Menu 2 4 5).
When muting the microphone the first press mutes the
call and the second unmutes it.
Once the phone is placed in the HF Desktop Charger,
you may set the Lights (Menu 4 01), Ringing Volume (Menu
4 2), Keypad Tones (Menu 4 4), Ringing Options (Menu 13)
and earpiece volume (side buttons on phone) differently
from the settings selected for handportable use.
The phone memorizes these desktop settings and uses
them whenever the phone is placed in the HF Desktop
Charger again. The charger also memorizes the
adjusted earpiece volume and uses it for the built-in
speaker. Otherwise, the charger acts similarly to the
Compact Desktop Charging Stand (CHH-2).
The battery charging times are the same as those for
the Rapid Travel Charger (ACH-4U).
M in i H e a d s e t C a r K it (C A RK -8 3 )
This kit includes the Mobile Holder (MBH-6), Swivel
Mount (HHS-1), Rapid Cigarette Lighter Charger
(LCH-2), Mini Headset (HDC-2), and Headset Adapter
(HDC-1).
Note: In Canada, items can be purchased separately to
form the car kit option.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
M o b ile H o ld e r (M B H -6 )
The Mobile Holder holds the
phone in place, for example,
during charging with the Rapid
Cigarette Lighter Charger (LCH-2).
The Mounting Plate (MKE-1)
comes with the Mobile Holder.
C o m p a c t H a n d s fr e e C a r K it (C A RK -10 P)
(PHONE NOT INCLUDED)
PHF-1P
MKE-1
HHS-1
MBH-6
CKH-1
HFM-7B
LCP-2
The portable handsfree car kit CARK-10P provides a
flexible approach to simple car installation with charging
and handsfree facility.
B e lt C lip (B C C -1)
A belt clip makes your phone easier to
carry. This convenient snap-on belt
clip holds the phone securely.
A c c e s s o r ie s fo r D a ta
C o m m u n ic a tio n s
The phone can be used in connection with various data
accessories. Please contact your dealer for further
details.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
10 . C a r e a n d M a in te n a n c e
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you to fulfill the warranty
obligations and to enjoy this product for many years.
Keep the phone and all its parts and accessories out of
small childrens’ reach.
Keep the phone dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic circuits.
Do not use or store the phone in dusty, dirty areas.
Its moving parts can be damaged.
Do not store the phone in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
Do not store the phone in cold areas. When the phone
warms up (to its normal temperature), moisture can
form inside the phone, which may damage electronic
circuit boards.
Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
If the phone or any of its accessories are not working
properly, take them to your nearest qualified service
facility. The personnel there will assist you, and if
necessary, arrange for service.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Te c h n ic a l D a ta
PCS System
Weight
PCS1900
8.3 oz (235g) with 600mAh
NiMH battery
Capacity
179 cm3
Frequency Range
1850 - 1910 MHz (TX)
1930 - 1990 MHz (RX)
Transmitter Output Power
Battery Voltage
1 watt
6 V nominal
800mA typical
Charging current
Operating Temperature
+14° F to +131° F
(-10° C to +55° C)
Number of Channels
Memory Locations
Memory Capacity
299
125
Alpha: 20 characters per location
Numeric: 32 digits per location
USA
NOKIA MOBILE PHONES - 6200 Courtney Campbell
Causeway, Suite 900, P.O. Box 303730, Tampa, FL 33630
Tel: 1-800-666-5553.
CANADA
NOKIA PRODUCTS LTD. - 575 Westney Rd. South
Ajax, Ontario L1S 4N7. Tel: (905) 427-6654
The information contained in this User’s Guide was written for the phone
NHB-3NB.
The right to make changes and improvements to any of the products
described in this guide without prior notice is reserved.
Issue No. 2. ©1997 Nokia Mobile Phones. All rights reserved.
These commodities are authorized by the U.S. Government for export only
to Canada, Mexico, or the United States. They may not be resold, diverted,
transferred, transshipped or otherwise disposed of in any other country,
either in their original form or after being incorporated through an
intermediate process into other end-items, without the written approval of
the U.S. Department of State.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
|
