Nokia Bluetooth Headset BH 602 User Manual

Nokia Bluetooth Headset  
BH-602 User Guide  
Issue 1 EN  
Download from Www.Somanuals.com. All Manuals Search And Download  
The contents of this document are provided "as is". Except as  
required by applicable law, no warranties of any kind, either express  
or implied, including, but not limited to, the implied warranties of  
merchantability and fitness for a particular purpose, are made in  
relation to the accuracy, reliability or contents of this document.  
Nokia reserves the right to revise this document or withdraw it at  
any time without prior notice.  
The availability of particular products may vary by region. Please  
check with the Nokia dealer nearest to you.  
Unauthorized changes or modifications to this device may void the  
user's authority to operate the equipment.  
Export Controls  
This device may contain commodities, technology or software  
subject to export laws and regulations from the US and other  
countries. Diversion contrary to law is prohibited.  
Issue 1 EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download  
C o n t e n t s  
Contents  
1. Introduction .............................................................. 5  
Bluetooth wireless technology............................................................... 5  
2. Get started................................................................. 7  
Overview....................................................................................................... 7  
Chargers........................................................................................................ 8  
Charge the battery..................................................................................... 8  
Switch the headset on or off............................................................... 10  
Pair the headset....................................................................................... 10  
Disconnect the headset..................................................................... 12  
Reconnect the headset...................................................................... 12  
Troubleshooting....................................................................................... 12  
3. Basic use.................................................................. 14  
Place the headset on the ear............................................................... 14  
Call handling ............................................................................................ 15  
Adjust the headset volume................................................................... 17  
Mute or unmute the microphone....................................................... 17  
Switch the call between headset and mobile device ................... 17  
Turn off indicator light.......................................................................... 18  
Clear settings or reset............................................................................ 18  
4. Battery information................................................ 19  
Care and maintenance ................................................. 21  
4
Download from Www.Somanuals.com. All Manuals Search And Download  
I n t r o d u c t i o n  
1. Introduction  
With the Nokia Bluetooth Headset BH-602 you can make  
and receive calls while on the move and use your mobile  
device hands free. You can use the headset with compatible  
devices that support Bluetooth wireless technology.  
Read this user guide carefully before using the headset. Also  
read the user guide for your mobile device, which provides  
important safety and maintenance information. Keep the  
headset and its accessories out of reach of small children.  
Bluetooth wireless technology  
Bluetooth wireless technology  
allows you to connect compatible  
devices without cables. A  
<10m  
Bluetooth connection does not  
require that the mobile device and  
the headset be in line of sight, but  
the maximum distance between  
the devices is 10 meters (33 feet).  
5
Download from Www.Somanuals.com. All Manuals Search And Download  
 
I n t r o d u c t i o n  
The closer the mobile device and the headset are to each  
other, the better is the performance. The optimal operating  
range is shown in dark grey in the picture. The connection is  
subject to interference from distance and obstructions  
(shown in light grey) or other electronic devices.  
The headset is compliant with the Bluetooth Specification  
2.0 + EDR supporting the following profiles: Headset Profile  
1.1 and Hands-Free Profile 1.5. Check with the  
manufacturers of other devices to determine their  
compatibility with this device.  
There may be restrictions on using Bluetooth technology in  
some locations. Check with your local authorities or service  
provider.  
6
Download from Www.Somanuals.com. All Manuals Search And Download  
G e t s t a r t e d  
2. Get started  
Overview  
The headset contains the following parts: earloop (1),  
volume key (2), charger connector (3), answer/end key (4),  
indicator light (5), earpiece (6), power key (7), and  
microphone (8).  
1
3
+
4
2
5
6
7
8
Before you can start using the headset, you must charge the  
battery and pair the headset with a compatible device.  
7
Download from Www.Somanuals.com. All Manuals Search And Download  
   
G e t s t a r t e d  
Parts of the headset are magnetic. Metallic materials may  
be attracted to the headset. Do not place credit cards or  
other magnetic storage media near the headset, because  
information stored on them may be erased.  
Chargers  
Check the model number of any charger before using it with  
this headset. The headset is intended for use with the AC-3,  
AC-4, and DC-4 chargers.  
Warning: Use only chargers approved by Nokia for  
use with this particular enhancement. The use of  
any other types may invalidate any approval or  
warranty, and may be dangerous.  
When you disconnect the power cord of any enhancement,  
grasp and pull the plug, not the cord.  
Charge the battery  
The headset has an internal, nonremovable, rechargeable  
battery. Do not attempt to remove the battery from the  
headset, as you may damage the headset.  
8
Download from Www.Somanuals.com. All Manuals Search And Download  
   
G e t s t a r t e d  
1. Connect the charger to a wall outlet.  
2. Connect the charger cable to the charger connector. The  
indicator light is red while charging. It may take a while  
before charging starts. If charging does not start,  
disconnect the charger, plug it in again, and retry.  
Charging the battery for 15 minutes provides about  
5 hours of talk time with the AC-4 charger. Charging  
the battery fully may take up to 45 minutes with the  
AC-4 charger.  
3. When the battery is fully charged, the indicator light  
turns green. Disconnect the charger from the headset  
and the wall outlet.  
The fully charged battery has power for up to 11 hours of  
talk time or up to 300 hours of standby time. However, the  
talk and standby times may vary with different compatible  
Bluetooth devices, usage settings, usage styles, and  
environments.  
To check the battery charge when the headset is not  
connected to a charger, briefly press the power key. When  
the indicator light is green (displayed for about 3 seconds),  
the charge level is sufficient. When the light is yellow, you  
9
Download from Www.Somanuals.com. All Manuals Search And Download  
G e t s t a r t e d  
may need to recharge the battery soon. When the light is  
red, recharge the battery.  
When battery power is low, the headset beeps at regular  
intervals, and the indicator light slowly flashes red.  
Switch the headset on or off  
To switch on, press and hold the power key until the headset  
beeps and the green indicator light is displayed. When the  
headset tries to connect to a paired device, the indicator  
light slowly flashes green. When the headset is connected  
to a paired device and is ready for use, the indicator light  
slowly flashes blue. If the headset has not been previously  
paired with a device, it automatically enters the pairing  
mode (see “Pair the headset,” p. 10).  
To switch off, press and hold the power key until the  
headset beeps and the red indicator light flashes once.  
Pair the headset  
1. Ensure that your mobile device is switched on.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download  
   
G e t s t a r t e d  
2. To pair the headset if it has not been previously paired  
with a device, switch on the headset. The headset enters  
the pairing mode, and the indicator light flashes blue  
quickly.  
To pair the headset if it has been previously paired with  
another device, ensure that the headset is switched off,  
and press and hold the power key until the indicator  
light starts to flash blue quickly.  
3. Activate the Bluetooth feature on the mobile device,  
and set it to search for Bluetooth devices. See the user  
guide of your device for instructions.  
4. Select the headset from the list of found devices.  
5. Enter the passcode 0000 to pair and connect the  
headset to your device. In some mobile devices, you may  
need to make the connection separately after pairing.  
See the user guide of your device for details. You only  
need to pair the headset with your device once.  
If pairing is successful, the headset appears in the menu of  
the mobile device where you can view the currently paired  
Bluetooth devices.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download  
G e t s t a r t e d  
Disconnect the headset  
To disconnect the headset from your mobile device, switch  
off the headset, or disconnect it in the Bluetooth menu of  
your device.  
You do not need to delete pairing with the headset to  
disconnect it.  
Reconnect the headset  
To connect the headset to your mobile device, switch on the  
headset, and make the connection in the Bluetooth menu of  
your device, or press and hold the answer/end key for about  
2 to 3 seconds until you hear a short beep.  
In your device, you may be able to allow the headset to  
connect to it automatically when the headset is switched  
on. To do this in Nokia devices, change your paired device  
settings in the Bluetooth menu.  
Troubleshooting  
If you cannot connect the headset to your mobile device, do  
as follows:  
12  
Download from Www.Somanuals.com. All Manuals Search And Download  
     
G e t s t a r t e d  
Ensure that the headset is charged, switched on, and  
paired with your device.  
Ensure that the Bluetooth feature is activated on your  
device.  
Ensure that the headset is within 10 meters (33 feet) of  
your device and that there are no obstructions between  
the headset and the device, such as walls, or other  
electronic devices.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download  
B a s i c u s e  
3. Basic use  
Place the headset on the ear  
The headset is provided with an earloop that you can use for  
a better fit on your ear.  
Slide the earloop over your ear (1), and gently plug the  
earpiece into your ear. Push or pull the earloop to set its  
length. Set the headset so that it points toward your mouth  
(2).  
1
2
14  
Download from Www.Somanuals.com. All Manuals Search And Download  
   
B a s i c u s e  
To use the headset on the left ear, rotate the earloop so that  
the loop is to the left of the Nokia logo (3).  
3
Call handling  
To make a call, use your mobile device in the normal way  
when the headset is connected to it.  
If your device supports last number redialing with the  
headset, press the answer/end key twice.  
If your device supports voice dialing with the headset, press  
and hold the answer/end key until the mobile device starts  
15  
Download from Www.Somanuals.com. All Manuals Search And Download  
 
B a s i c u s e  
voice dialing, and proceed as described in the user guide of  
the device. Voice dialing cannot be used during a call.  
To answer a call, press the answer/end key, or use the keys  
of the mobile device. When you receive a call, the indicator  
light flashes blue quickly, and you hear a ringing tone  
through the headset.  
To reject an incoming call, press the answer/end key twice,  
or use the keys of the mobile device.  
To end a call, press the answer/end key, or use the keys of  
the mobile device.  
To answer a waiting call and put the current call on hold,  
press and hold the answer/end key. To answer a waiting call  
and end the current call, press the answer/end key briefly.  
To reject a waiting call, press the answer/end key twice. To  
switch between the active call and the call on hold, press  
and hold the answer/end key. To end the active call and  
make the call on hold active, press the answer/end key. To  
use these features, your mobile device must support the  
Bluetooth Hands-Free profile 1.5, and call waiting must be  
set to on in your device. Call waiting is a network service.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download  
B a s i c u s e  
Adjust the headset volume  
The headset automatically adjusts the volume according to  
ambient noise. To set the minimum volume, press the  
volume key up to increase or down to decrease the volume,  
or use the keys of the mobile device. To adjust the volume  
quickly, press and hold the volume key in the desired  
direction.  
Mute or unmute the microphone  
To mute or unmute the microphone during a call, press the  
middle of the volume key.  
Switch the call between headset and  
mobile device  
To switch the call from the headset to the connected mobile  
device, press and hold the power key for about 2 to 3  
seconds (the headset switches off), or use the respective  
function in your device. To switch the call back to the  
headset, switch on the headset, or press and hold the  
answer/end key (when the headset is on).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download  
     
B a s i c u s e  
Turn off indicator light  
To turn the indicator light off or on, briefly press the power  
key and the answer/end key at the same time when no call  
is in progress.  
When the indicator light is off, it is not shown when the  
headset is connected to a device, when you handle calls, or  
when the microphone is muted. When you switch on the  
headset, the indicator light is enabled.  
Clear settings or reset  
To clear all the pairing settings from the headset, press and  
hold the power key and the answer/end key until the  
headset beeps and the indicator light alternates red and  
green.  
To reset the headset if it stops functioning, although it is  
charged, plug the charger into the headset, and briefly press  
the power key and the answer/end key at the same time. The  
headset switches off. To use the headset, reconnect it to  
your mobile device. The reset does not clear the headset  
settings.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download  
   
B a t t e r y i n f o r m a t i o n  
4. Battery information  
Your device is powered by a rechargeable battery. The  
battery can be charged and discharged hundreds of times,  
but it will eventually wear out. Recharge your battery only  
with Nokia approved chargers designated for this device.  
Unplug the charger from the electrical plug and the device  
when not in use. Do not leave a fully charged battery  
connected to a charger, since overcharging may shorten its  
lifetime. If left unused, a fully charged battery will lose its  
charge over time.  
Never use any charger that is damaged.  
Leaving the device in hot or cold places, such as in a closed  
car in summer or winter conditions, will reduce the capacity  
and lifetime of the battery. Always try to keep the battery  
between 15°C and 25°C (59°F and 77°F). A device with a hot  
or cold battery may not work temporarily, even when the  
battery is fully charged. Battery performance is particularly  
limited in temperatures well below freezing.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download  
 
B a t t e r y i n f o r m a t i o n  
Do not dispose of batteries in a fire as they may explode.  
Batteries may also explode if damaged.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download  
C a r e a n d m a i n t e n a n c e  
Care and maintenance  
Your device is a product of superior design and  
craftsmanship and should be treated with care. The  
following suggestions will help you protect your warranty  
coverage.  
Keep the device dry. Precipitation, humidity, and all  
types of liquids or moisture can contain minerals that  
will corrode electronic circuits. If your device does get  
wet, allow it to dry completely.  
Do not use or store the device in dusty, dirty areas. Its  
moving parts and electronic components can be  
damaged.  
Do not store the device in hot areas. High temperatures  
can shorten the life of electronic devices, damage  
batteries, and warp or melt certain plastics.  
Do not store the device in cold areas. When the device  
returns to its normal temperature, moisture can form  
inside the device and damage electronic circuit boards.  
Do not attempt to open the device.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download  
 
C a r e a n d m a i n t e n a n c e  
Do not drop, knock, or shake the device. Rough handling  
can break internal circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong  
detergents to clean the device.  
Do not paint the device. Paint can clog the moving parts  
and prevent proper operation.  
All of the above suggestions apply equally to your device,  
battery, charger, or any enhancement. If any device is not  
working properly, take it to the nearest authorized service  
facility for service.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download  

Miller Electric Welding System 145 DX User Manual
MSi Computer Hardware 945GM1 User Manual
MTD Snow Blower 600 Series User Manual
Nilfisk Advance America Vacuum Cleaner VC300 User Manual
Novatel GPS Receiver KV1 User Manual
Oki Network Card 7300e User Manual
Oki Printer ML390 User Manual
Optimus Cassette Player 14 1246 User Manual
OWI Portable Speaker P8378P User Manual
Packard Bell Computer Drive 5800 User Manual