Nilfisk C 120.3
Nilfisk C 125.3
Nilfisk C 120.5 X-TRA
User Manual
128330335
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
1 Safety precautions and warnings .............................................3
2 Description ...............................................................................5
3 Before you start using your pressure washer...........................6
4 Operating your pressure washer..............................................7
5 Fields of Application and working methods..............................9
6 After using your pressure washer...........................................11
7 Maintenance...........................................................................13
8 Trouble Shooting ....................................................................15
9 Further information.................................................................16
10 EC Declaration of Conformity.................................................18
1 Safety Precautions and Warnings
Symbols used to mark in-
structions
Before starting up
your high-pres-
sure washer for
the first time, this
instruction manual
This symbol is
used to mark safety
instructions that
must be observed
to prevent damage
ꢁ
must be read through carefully.
Save the instructions for later
use.
to the machine and its per-
formance.
This symbol
indicates tips
and instructions
Safety instructions
marked with this
symbol must be
observed to pre-
to simplify work and to ensure a
safe operation.
vent danger to persons.
Especially check:
ꢀThe operator and anyone in
the immediate vicinity of the
site of cleaning should take
action to protect themselves
from being struck by debris
dislodged during operation.
Wear goggles and protection
clothes during operation.
ꢀThis appliance has been de-
signed for use with cleaning
agents supplied or recom-
mended by the manufacturer.
The use of other cleaning
agents or chemicals may
adversely affect the safety of
the appliance.
ꢀThe insulation of the electric
cable should be faultless
and without any cracks. If the
electric cable is damaged, an
authorized Nilfisk distributor
should replace it.
Do not let children or people
who have not read the instruc-
tion manual operate the ma-
chine.
This appliance is not intended
for use by children or other
WARNING!
persons without assistance or ꢀHigh pressure jets can be
supervision if their physical,
sensory or mental capabili-
ties prevent them from using it
safely. Children should be su-
dangerous. Never direct the
water jet at persons, pets,
live electrical equipment or
the machine itself.
pervised to ensure that they do ꢀNever try to clean clothes or
not play with the appliance.
footwear on yourself or other
persons.
Before starting up your machine ꢀHold the spray lance firmly
ꢀDisconnect from electrical
power supply before carrying
out user maintenance.
please check it carefully for any
defects. If you find any, do not
start up your machine and con-
tact your Nilfisk distributor.
with both hands. The spray
lance is affected by a thrust ꢀTo ensure the appliance
of up to 16.4 N during ope–
ration.
safety only use original spare
parts from the manufacturer
3
Download from Www.Somanuals.com. All Manuals Search And Download.
or approved by the manufac- ꢀCable connections should be
turer. kept dry and off the ground.
ꢀHigh pressure hoses, fittings ꢀIf the electric cable is
least 10 metres to absorb pos-
sible pressure peaks (min diam-
eter ½ inch).
and couplings are important
for the safety of the appli-
ance. Only use hoses, fittings
and couplings recommended
by the manufacturer.
damaged, it must be re-
placed by the manufacturer
or his service agent or simi-
larly qualified person in order
to avoid a hazard.
Operation by suction (for ex-
ample from a rainwater vessel)
is carried out without backflow
preventer. Recommended suc-
tion set: 126411387.
ꢀDo not use the appliance
if a supply cord or impor-
tant parts of appliance are
damaged, e.g. safety device ,
high pressure hose and trig-
ger gun.
As soon as water has flown
through the BA valve, this water
is not considered to be drinking
water any more.
Mains power connection
ꢀThe appliance is intended to
clean cars and garden etc..
ꢀAppropriate ear protection
has to be used.
The following should be ob-
served when connecting the
high pressure washer to the
electric installation:
IMPORTANT! Only use wa-
ter without any impurities. If
there is a risk of running sands
in the inlet water (i.e. from your
own well), an additional filter
should be mounted.
ꢀNever use the machine in ꢀOnly connect the machine to
an environment where there
could be a danger of explo-
sion. If any doubt arises,
please contact the local
authorities.
an installation with earth con-
nection.
ꢀThe electric installation shall
be made by a certified elec-
trician.
ꢀIt is strongly recommended
that the electric supply to this
machine should include a re-
sidual current device (GFCI).
Repair and maintenance
WARNING! Always remove the
electric plug from the socket be-
fore carrying out maintenance
work on the machine.
ꢀIt is not allowed to clean
asbestos-containing surfaces
with high pressure.
ꢀThis high pressure washer
must not be used at tempera-
tures below 0°C.
Safety devices
Locking device on spray gun
(7a) (see foldout at the end of
this manual):
Water connection
Connection to the public mains
WARNING!
according to regulations.
The spray gun features a lock-
ing device. When the pawl is
activated, the spray gun cannot
be operated.
Inadequate extension cables
can be dangerous. Cables on
drums should always be com-
pletely unwinded to prevent the
cable from overheating.
This high pres-
sure washer is
only allowed to be
connected with
Thermal sensor:
the drinking water
A thermal sensor protects the
motor against overloading. The
machine will restart after a few
minutes when the thermal sen-
sor has cooled.
Extension cables should be of
a watertight construction and
comply with the below-men-
tioned requirements for length
and cable dimensions.
mains, when an appropriate
backflow preventer has been
installed, Type BA according
to EN 1717. The backflow pre-
venter can be ordered under
number 106411177. The length
of the hose between the back-
flow preventer and the high
pressure washer must be at
Pressure safety device
1.0 mm² max.
1.5 mm² max.
2.5 mm² max.
12.5 m
20 m
30 m
An integrated hydraulic safety
valve protects the system from
excessive pressure.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Description
2.1 Application
This high-pressure washer has
been developed for domestic
use within:
the high-pressure washer for
vaious cleaning jobs.
Only use the high-pressure
washer for purposes described
in this manual.
- Car, motorbike, boat, cara-
van, trailer, patio/drive/flag-
stones, woodwork, brickwork,
barbecue, garden furniture,
lawn mower
The safety precautions must be
observed to prevent damage
to the machine, the surface to
be cleaned or severe personal
injuries.
Section 5 describes the use of
2.2 Operation elements
and model survey
See illustration at the end of
this manual.
Specifications: See model tag
(15) of machine.
1 Start/stop switch
Sound pressure level measured
in accordance with ISO 3744,
EEC Directive 2000/14/EEC:
2 Water inlet (with filter)
3 High pressure connection
4 High pressure hose
5 Electric cable
C 120.3/C 125.3:
6 Click & Clean spray lance
7 Spray gun with lock
8 Click & Clean Tornado PR
LpA = 78 dB(A), LWA = 92 dB(A).
®
C 120.5 X-TRA:
nozzle
LpA = 71.3 dB(A), LWA = 86 dB(A).
®
9 Click & Clean Powerspeed
nozzle
Hand/arm vibrations measured
according to ISO 5349 is < 2.5
m/s2.
10 Click & Clean foam sprayer
11 Nozzle cleaning tool
12 Trolley Handle
13 Hose reel (not standard)
14 Hose hook
We reserve the right to alter the
specifications.
15 Model tag
16 Warning sign
17 Cable hook
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Before you start using your
pressure washer
3.1 Mounting of trolley
handle and hose hook
1. Mount the trolley handle (12)
on the machine.
2. Mount the hose hook (14) on
the handle.
3.2 Mounting of trolley hand-
le and hose reel (models
with hose reel)
1. Mount the trolley handle (12)
on the machine.
2. Mount the hose reel (13) on
the handle
3.3 Mounting of cable book
(C 120.5 X-TRA)
Click cable hooks (17) on to the
machine.
3.4 Mounting of quick
coupling
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet filter
must always be fit-
ted in the water
inlet pipe to filter
out sand, limestone
ꢁ
and other impurities as
these will damage the pump
valves.
Caution: Failure to fit the filter
will invalidate the guarantee.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Mounting of high pres-
sure hose
Attach the high pressure hose
(4) to the spray gun (7).
Detach the high pressure hose
by pressing the pawl (A).
4 Operating your pressure washer
4.1 Connection of high pres-
sure hose
1. Mount the high pressure
hose on the outlet (3).
4.2 Mounting of spray
lance and Click & Clean
nozzles
1. Push the spray lance (6) into
the spray gun (7) and screw
it on.
Note: The
spray lance (6)
has a built-in low
pressure nozzle that can be
used for flushing away dirt.
2. Attach the nozzle.
Warning: When
attaching the Click &
Clean nozzles, the
pawl on the side
6
7
of the spray lance
ꢁ
should come out again.
Note: The Tor-
®
nado PR nozzle
and the foam
sprayer feature a swivel lock,
which must be positioned in the
hole in the Click & Clean spray
lance.
Press the pawl to detach the
Click & Clean nozzle.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Water connection
An ordinary 1/2" garden hose of
min. 10 m and max. 25 m will
be suitable.
IMPORTANT!
Only use water
without any
impurities. If there is a risk
of running sands in the inlet
water (i.e. from your own well),
an additional filter should be
mounted.
1. Let the water run through the
water hose before connecting
it to the machine to prevent
sand and dirt from penetrat-
ing the machine.
Note: Check that the filter is
fitted in the water inlet pipe
and that it is not clogged up.
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
water, max. pressure: 10 bar,
max. temperature: 40°C).
3. Turn on the water.
NOTE: Connec-
tion to the public
mains according
to regulations.
4.4 Start and stop of the
machine (when con-
The spray lance is affected
by a thrust during operation -
therefore always hold it firmly
with both hands. IMPORTANT:
Point the nozzle at the
ground.
Do not cover the machine
during operation.
nected to a water supply)
Note: If the ma-
chine is left or not
used for 5 min-
utes, it must be switched off on
the start/stop switch "O" (1):
1. Check that the machine is in
upright position.
NOTE: Do not place the
machine in high grass!
2. Release the trigger lock.
3. Activate the trigger of the
spray gun and let the water
run until all air has escaped
from the water hose.
1. Turn the start/stop switch (1)
to position"O".
2. Disconnect the electrical plug
from the socket.
3. Shut off the water supply and
activate the trigger to relieve
the machine of pressure.
4. Lock the spray gun.
4. Turn the start/stop switch (1)
to position"I".
5. Activate the trigger of the
spray gun.
When releasing the trigger of
the spray gun, the machine
automatically stops. The ma-
chine will start again when you
re-activate the spray gun.
Always adjust the distance and
thus the pressure of the nozzle
to the surface, which is to be
cleaned.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5 Start the machine (when
connected to open con-
tainers (suction mode))
The washer can take in water
from a rain water tank as an
example. The hose for the wa-
ter supply must not be too long,
approx. 5 m.
1. Place the other end of the
water hose in the water tank.
Use an external filter if the
water contains impurities.
2. Turn the start/stop switch (1)
to position"I".
Make sure that the water tank
is not placed on a lower level
than the machine.
3. Activate the trigger of the
spray gun and let the water
run, until the air has escaped
from the water hose and the
pump.
4. Mount spray lance and
nozzle.
4.6 Pressure regulation on
The pressure can be regulated
on the TORNADO PR nozzle.
®
®
the TORNADO PR-
nozzle
High pressure
Low pressure
5 Fields of application and working
methods
5.1 General
Efficient high presure cleaning is achieved by following a few guide-
lines, combined with your own personal experience of specific
cleaning tasks. Accessories and detergents, when correctly cho-
sen, can increase the efficiency of your pressure washer. Here is
some basic information about cleaning.
5.1.1 Detergent and foam
Foam or detergent should be applied onto dry surfaces so that the
chemical product is in direct contact with the dirt. Detergents are
applied from bottom to top, for example on a car bodywork, in order
to avoid "super clean" areas, where the detergent collects in higher
concentration and streams downwards. Let the detergent work for
several minutes before rinsing but never let it dry on the surface be-
ing cleaned. Note: It is important that the detergents do not dry up.
Otherwise the surfac that has to be cleaned can be damaged.
5.1.2 Mechanical effect
In order to break down tough layers of dirt, additional mechanical
effect may be required. Special wash brushes offer this supplemen-
tary effect that cuts through dirt (especially by car washing).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Typical fields of application
Below you will find a description of a lot of cleaning tasks which can be solved by a pressure washer
from Nilfisk in association with accessories and detergents.
Task
Accessories ‘Click Cleaning method
& Clean’
Car
Car nozzle,
1. Apply Car Combi Cleaner with the foam sprayer. Always
auto brush,
underchassis
nozzle,
Foam sprayer,
Car Combi Cleaner
start from the bottom and work upwards. Let Car Combi
Cleaner act for at least 5 min.
2. Wash the car with the car nozzle, which has been optimized for
quick and gentle cleaning of enamelled surfaces (the jet is wider
and not so sharp). Start at the front of the car and work back-
wards to avoid water from penetrating by the door mouldings.
3. Use the brush for removal of traffic film which is not removed by the
nozzle. If the car is very dirty, apply Car Combi Cleaner again.
4. Attach the undercarriage nozzle and clean undercarriage and
wheel arches.
5. Remove water from the surface of the car with the scraper
on the car brush. Make sure that all grains of sand etc. have
been removed before using the scraper. Wipe with a wash lea-
ther where the scraper cannot reach.
Rims, alu- Rim brush,
Apply Alu Cleaner with an automizer. Let it act for approx.
5 min. and wash with the rim brush. For steel rims, use Car Com-
bi Cleaner. Use the foam sprayer and wash with rim brush.
Be careful! The high pressure jet may damage the tyres.
minium
auto nozzle,
atomizer,
Alu Cleaner
Flagstones, Powerspeed®
concrete nozzle,
floors and Stone & Wood
other hard Cleaner,
Wash towards outlets or the like. On surfaces with moss or
algae you may start by applying Stone & Wood Cleaner with
the foam sprayer. Wash before the soap dries. Another
more effective and quicker method is to use the Patio
Cleaner. Thus you will also avoid splashes.
surfaces
Patio Cleaner
Garden
furniture,
wood
Wood Cleaner
Garden brush
Apply Wood Cleaner and wash before the soap dries.
NOTE: Use the garden brush to clean off the dirt.
Brickwork, Powerspeed®
Wood work nozzle,
Stone & Wood
Same method as for flagstones, but be careful - bad joints and
wood may be damaged by high pressure.You may choose only
to use the Tornado® nozzle. Adjust the distance (pressure) to
the quality of the joints and the wood. Patio Cleaner can also be
used on vertical surfaces.
Cleaner,
Patio Cleaner
Gutter
Underchassis spray Wash the gutter with the nozzle. Always wash towards
lance
downpipes. Beware not to spray under the roofing.
Cleaning
of drain
pipes, out-
lets, down
pipes etc.
Tube cleaner
Push the tube cleaner approx. ½ m (to mark) into a tube or drain
and activate the trigger of the spray handle. The nozzle opening
turning backwards will pull the cleaner through the tube. The
nozzle will break down the „plug“ and flush the dirt backwards.
Rust, paint Water/sandblasting Mount the water/sand blasting equipment and rust and paint
equipment
is efficiently and quickly removed. Beware not to damage the
surface to be sandblasted.
Green-
house
Tornado® PR nozzle Wash with high pressure and maybe a brush.You may use Stone
brush, Stone &
Wood Cleaner
& Wood Cleaner to remove moss and algae.
Garden
Tornado® PR noz-
Rinse the worst dirt off with the nozzle. Apply Metal Cleaner with
the foam sprayer and let it act for approx. 5 min. Wash with the
nozzle.You may use the multiangle adaptor for hard to get at
areas to avoid splashing.
tools, lawn zle, Powerspeed®
mover
nozzle, multiangle
adaptor, Metal
Cleaner
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6 After using your pressure washer
6.1 Storing the washer
The machine should be sto-
red in a frost-free room!
3. Stop the machine, unplug
and wind up hose and cable.
4. Place spray handle, nozzles
and other accessories in the
holders of the machine.
Pump, hose and accessories
should always be emptied of
water prior to storing as follows:
Should the machine by mistake
be frozen, it will be necessary
to check it for damage.
ꢁ
1. Stop the machine (turn
the start/stop switch (1) to
position"O") and detach wa-
ter hose and accessory.
2. Restart the machine and
activate the trigger. Let the
machine run until no more
water runs through the spray
gun.
NEVER START-UP A FROZEN
MACHINE.
Frost damages are not
covered by the guarantee!
6.2 Winding up of electric
cable and high pressure
hose
To avoid accidents, the electric
cable and the high pressure
hose should always be winded
carefully up.
C 120.3
C 125.3
C 120.5 X-TRA
Wind up the electric cable and
the high pressure hose on the
appropriate hooks. Built-in clip
for good holding.
The high pressure washer
comes in two models: A) with
hook for storage of high pres-
sure hose (14) - B) with a hose
reel (13), where the hose is
pushed into the reel and after-
wards winded up.
C 120.5 X-TRA
C 120.3
C 125.3
11
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 Storage of accessories
The standard accessories
C 120.5 X-TRA
C 120.3
C 125.3
(spray gun, spray lance, noz-
zles and foam sprayer) can be
stored on the pressure washer.
The nozzle cleaning tool can
also be stored on the product.
6.4 Wall storage
The pressure washer can be
stored on a wall on a special
wall hook (not standard).
A
B
C
Only mount the wall hook on a
sturdy wall. Adjust the length
of the screws and size of rawl-
plugs to the type of wall.
On the wall hook garden/rim
brush (a) foam sprayer (b),
Click & Clean brush (c) and
Click & Clean nozzles (d) can
be stored.
D
Note: For this
product the wall
hook can only be
used as storage.
Important: The
bearing capacity
of the wall hook
is max. 30 kg.
ꢁ
12
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Maintenance
WARNING! Always disconnect
To ensure a long and problem
free working life, please take
the following advice:
the electrical plug from the
socket prior to maintenance or
cleaning.
ꢀWash out water hose, high
pressure hose, spray lance
and accessories before
mounting.
ꢀClean the connectors of dust
and sand.
ꢀMake sure that no sand or
dirt is blocking the movement
of the pawl on the Click &
Clean spray lance. Rinse ac-
cording to requirement.
ꢀRinse the detergent spraying
attachment after use.
ꢀClean the nozzles.
Any repair should always be
made in an authorized work-
shop with original spare parts.
7.1 Cleaning of water inlet
fi lter
Clean the water inlet filter
regularly once a month or more
frequently according to use.
Carefully loosen the filter with a
screwdriver and clean it. Check
that it is intact before re-mount-
ing it.
The inlet filter must always be
fitted inside the water inlet pipe
to filter out sand, limestone and
other impurities, as they will
damage the pump valves.
CAUTION: Failure to fit the filter
will invalidate the guarantee.
7.2 Cleaning of nozzle
A clogging up in the nozzle
causes a pump pressure which
is too high. This is why cleaning
is required immediately.
1. Stop the machine and dis-
connect the nozzle.
2. Clean the nozzle. IMPOR-
TANT: The cleaning tool (11)
should only be used when
the nozzle is detached!
3. Flush the nozzle backwards
with water.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Cleaning of machine
vents
The machine should be kept
clean so as to let cooling air
pass freely through the ma-
chine vents.
7.4 Greasing of couplings
To ensure an easy connec-
tion and that o-rings do not dry
up, the couplings should be
greased regularly.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Trouble-shooting
To avoid unnecessary disappointments, you should check the following before contacting the Nilfisk
service organization:
Symptom
Cause
Recommended action
Machine refuses to start Machine not plugged in
Defective socket
Plug in machine.
Try another socket.
Replace fuse. Switch off other machines.
Try without the extension cable.
Fuse has blown
Defective extension cable
Fluctuating pressure
Pump sucking air
Check that hoses and connections are air-
tight.
Valves dirty, worn out
or stuck
Pump seals worn out
Clean and replace or refer to local Nilfisk
distributor
Clean and replace or refer to local Nilfisk
distributor.
Motor busses
Machine stops
Low voltage or
low temperature
Activate the trigger of the spray gun.
Fuse has blown
Incorrect mains voltage
Replace fuse. Switch off other machines.
Check that the mains voltage corresponds
to specification on the model tag.
Leave the washer for 5 minutes to cool
down.
Thermal sensor activated
Nozzle partially blocked
Fuse too small
Clean the nozzle (see section 7.2)
Fuse blows
Change to an installation higher than the
amp. consumption of the machine.
You may try without the extension cable.
Machine pulsating
Air in inlet hose/pump
Allow machine to run with open trigger until
regular working pressure resumes.
Check that the water supply corresponds to
specifications required (see model tag)
NB! Avoid using long, thin hoses (min. 1/2")
Clean the nozzle (see section 7.2)
Clean the filter (see section 7.1)
Inadequate supply of
mains water
Nozzle partially blocked
Water filter blocked
Hose kinked
Straighten out hose.
Machine often starts
and stops by itself
Pump/spray gun is
leaking
Contact your nearest Nilfisk Service
Centre.
Machine starts, but
no water comes out
Pump/hoses or accessory Wait for pump/hoses or accessory to thaw.
frozen
No water supply
Water filter blocked
Nozzle blocked
Connect inlet water.
Clean the filter (see section 7.1)
Clean the nozzle (see section 7.2)
In case problems other than the above occur, please contact your local Nilfisk distributor.
UK:
Customer Services at Penrith - 01768 868995
15
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Further information
9.1 Recycling the washer
Make the old cleaner unusable
immediately.
As specified in European Direc-
tive 2002/96/EC on old electri-
cal and electronic appliances,
used electrical goods must
be collected separately and
recycled ecologically.
1. Unplug the cleaner and cut
the electric cable.
Do not discard electrical appli-
ances with household waste.
Contact your local authorities or
your nearest dealer for further
information.
9.2 Warranty conditions
Nilfisk guarantees high pres-
sure washers for domestic use
for 2 years. If your high pres-
sure washer or accessories are
handed in for repair, a copy of
the receipt must be enclosed.
Guarantee repairs are being
made on the following condi-
tions:
ꢀthat defects are attributable
to flaws or defects in materi-
als or workmanship. (wear
and tear as well as misuse
are not covered by the guar-
antee).
Repairs under this guarantee
include replacement of defec-
tive parts, exclusive of packing
and postage/carriage. Besides,
we refer to your national law of
sale.
The machine should be for-
warded to one of the service
centres of the Nilfisk organisa-
tion with description/specifi ca-
tion of the fault.
Repairs not covered by the
guarantee conditions will be
invoiced. (I.e. malfunctions due
ꢀthat the directions of this
instruction manual have been to Causes mentioned in section
thoroughly observed.
ꢀthat repair has not been car-
ried out or attempted by oth-
er than Nilfisk-trained service
staff.
Troubleshooting Chart of the
instruction manual).
ꢀthat only original accessories
have been applied.
ꢀthat the product has not been
exposed to abuse such as
knocks, bumps or frost.
ꢀthat only water without any
impurities has been used.
ꢀthat the high pressure wash-
er has not been used for
rental nor used commercially
in any other way.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
9.3 Accessories
Only use original accessories.
Click & Clean
Car nozzle
Special nozzle for enameled surfaces. Optimal distance: 30
- 50 cm.
Click & Clean
Undershassis
nozzle
90° angled special nozzle for undercarriage and wheel arches.
Integrated guide shoes.
Click & Clean
Multiangle
adaptor
Adjusted in angles from 0° - 90° for better working posture and
cleaning of hard to get at places as for instance barrels or the
underside of the lawn mower. Fits all nozzles.
Click & Clean
Brushes
For cars and other surfaces. Available in more shapes.
Extension hose
7 m extension hose increasing the working range.
Special spray lance for washing your car underneath.
Underchassis
spray lance
Drain & Tube
cleaner
15 m long tube cleaner for the cleaning of tubes and drains.
Water-sand-
blasting equip-
ment
For removal of paint and rust. Sand available from do-it-your-
self shops.
Patio Plus
Equipment for quick cleaning of patio/drive/flagstones.
Garden brush
Rim brush
Wall hook
Rotary brush for cleaning of wooden surfaces.
Rotary brush for cleaning of wheel rims.
For suspension of your high pressure washer on the wall.
Rotary brush
For cleaning vehicles and other surfaces.
Water suction
kit
For removal of large amounts of water from e.g. garden
pounds.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergents
Stone & Wood Cleaner
Plastic Cleaner
For flagstones, brick- and woodwork. Suitable for moss and algae.
For plastic and synthetic materials such as garden furniture.
For cleaning of metal such as garden tools.
Metal Cleaner
Car Combi Cleaner
Alu Cleaner
For cars etc. With rinsing wax.
For surfaces of aluminium. Applied with an atomizer.
Oil & Grease Cleaner
For cleaning of grease and oil on motors for instance. Applied with
an atomizer.
Wood Cleaner
For cleaning of wooden surfaces incl. of wooden garden furniture.
10 EU Declaration of Conformity
EU Declaration of Conformity
Product:
Type:
High Pressure Washer
Nilfisk C 120.3-6, C 125.3-8, C 120.5-6 X-TRA
230 V 1~, 50 Hz - IP X5
Description:
The design of the unit
corresponds to the following
pertinent regulations:
EC Machine Directive
EC Low-voltage Directive
EC EMV Directive
2006/42/EC
2006/95/EC
2004/108/EC
Applied harmonised standards: EN 60335-2-79
Applied national standards and IEC 60335-2-79
technical specifications:
Nilfisk
Division of Nilfisk-Advance A/S
Industrivej 1
DK-9560 Hadsund
Anton Sørensen
General Manager,
Technical Operations EACP
Hadsund, 01.11.2009
18
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GERMANY
POLAND
Nilfisk-ALTO
Nilfisk-Advance Sp. Z.O.O.
05-800 Pruszków
ul. 3-go MAJA 8
Division of Nilfisk-Advance AG
Guido-Oberdorfer-Str. 10
89287 Bellenberg
Tel.: (+49) 180 5 37 37 37
E-mail: info.de@nilfisk-alto.com
Tel.: +48 22 738 37 50
PORTUGAL
Nilfisk-Advance
Sintra Business Park
Zona Industrial Da Abrunheira
Edificio 1, 1° A
P2710-089 Sintra
Tel.: +35 121 911 2670
E-mail: mkt.pt@nilfisk-advance.com
GREECE
Nilfisk-Advance SA
8, Thoukididou str.
164 52 Argiroupolis
Tel.: +30 210 911 9600
E-mail: nilfi[email protected]
HEAD QUARTER
DENMARK
Nilfisk-Advance Group
Sognevej 25
DK-2605 Brøndby
HOLLAND
RUSSIA
Tel.: (+45) 4323 8100
E-mail: mail.com@nilfisk-advance.com
Nilfisk-Advance
Нилфиск-Эдванс
127015 Москва
Вятская ул. 27, стр. 7
Россия
Versterkerstraat 5
1322 AN Almere
Tel.: (+31) 36 546 07 00
E-mail: info.nl@nilfisk-advance.com
SALES COMPANIES
Tel.: (+7) 495 783 96 02
E-mail: info@nilfisk.ru
ARGENTINA
Nilfisk-Advance srl.
HONG KONG
Edificio Central Park
Nilfisk-Advance Ltd.
Room 2001 HK Worsted Mills
Industrial Building
SINGAPORE
Herrera 1855, Office 604
Ciudad Autónoma de Buenos Aires
Tel.: (+54) 11 6091 1571
Nilfisk-Advance Pte. Ltd.
40 Loyang Drive
31-39 Wo Tong Tsui Street
Kvai Chung
Tel.: (+852) 24 27 59 51
Singapore 508961
Tel.: (+65) 6759 9100
AUSTRALIA
Nilfisk-Advance
SPAIN
48 Egerton St.
HUNGARY
Nilfisk-Advance S.A.
Torre D’Ara
P.O. Box 6046
Nilfisk-Advance Kereskedelmi Kft.
II. Rákóczi Ferenc út 10
2310 Szigetszentmiklos-Lakihegy
Tel: (+36) 24475 550
Silverwater, N.S.W. 2128
Tel.: +61 2 8748 5900
E-mail: info@nilfisk-advance.com.au
Paseo del Rengle, 5 Pl. 10
08302 Mataró
Tel.: (+3) 4 93 741 2400
E-mail: mkt.es@nilfisk-dvance.com
E-mail: info@nilfisk-advance.hu
AUSTRIA
Nilfisk-Advance GmbH
Metzgerstrasse 68
5101 Bergheim bei Salzburg
Tel.: 0662 456 400-14
E-mail: info.at@nilfisk-advance.com
INDIA
SWEDEN
Nilfisk-Advance
Sjöbjörnsvägen 5
100 73 Stockholm
Tel.: (+46) 85 55 944 00
E-mail: info.se@nilfisk.com
Nilfisk-Advance India Limited
349, Business Point,
No 201,2nd floor, above Popular Car World,
Western Express High way, Andheri ( East),
Mumbai - 400 069
BELGIUM
Tel.: (+91) 223 2174592
Nilfisk-Advance n.v-s.a.
Riverside Business Park
Boulevard Internationalelaan 55
Bâtiment C3/C4 Gebouw
Bruxelles 1070
SWITZERLAND
IRELAND
Nilfisk-Advance
Nilfisk-Advance
1 Stokes Place
St. Stephen’s Green
Dublin 2
Ringstrasse 19
Kircheberg/Industri Stelzl
9500 Wil
Tel.: (+32) 2 467 60 50
E-mail: info.be@nilfisk-advance.com
Tel.: (+41) 719 23 84 44
E-mail: info.ch@nilfisk-advance.com
Tel.: (+35) 3 12 94 38 38
CANADA
ITALY
TAIWAN
Nilfisk-Advance
Nilfisk-Advance SpA
Nilfisk-Advance Taiwan Branch
1F, No. 193, sec. 2, Xing Long Rd.
Taipei
240 Superior Boulevard
Mississauga, Ontario L5T 2L2
Tel.: (+1) 905 564 1149
E-mail: [email protected]
Strada Comunale della Braglia, 18
26862 Guardamiglio (LO)
Tel.: +39 0377 41 40 46
E-mail: mercato.italia@nilfisk-advance.it
Tel.: (+88) 6227 002 268
THAILAND
CHILE
JAPAN
Nilfisk-Advance Co. Ltd.
89 Soi Chokechai-Ruammitr
Viphavadee-Rangsit Road
Ladyao, Jatuchak, Bangkok 10900
Tel.: (+66) 2 275 5630
Nilfisk-Advance de Chile
San Alfonso 1462
Nilfisk-Advance Inc.
1-6-6 Kita-shinyokohama, Kouhoku-ku
Yokohama, 223-0059
Tel.: (+81) 45 548 2571
Santiago
Tel.:(+56) 2 684 5000
E-mail: Pablo.Noriega@nilfisk-advance.com
KOREA
TURKEY
CHINA
Nilfisk-Advance
Nilfisk-Advance Profesional Temizlik
Ekipmanlari Tic. A/S.
Necla Cad. No. 48
Nilfisk-Advance (Suzhou)
Building 18, Suchun Industrial Estate
Suzhou Industrial Park
215021 Suzhou
Kumwon B/D 3F, 471-4, Gunja-Dong
Gwangjin-Ku
Tel.: (+82) 2497 8636
Yenisahra / Kadiköy
Istanbul
Tel.: (+90) 216 470 08 - 60
E-mail: info.tr@nilfisk-advance.com
Tel.: (+86) 512 6265 2525
MALAYSIA
Nilfisk-Advance Sdn Bhd
Sd 14, Jalan KIP 11
Taman Perindustrian KIP
Sri Damansara
CZECH REPUBLIC
Nilfisk-Advance
UNITED KINGDOM
Nilfisk-Advance Ltd.
Unit 24
VGP Park Horní Počernice
Do Čertous 1/2658
193 00 Praha 9
52200 Kuala Lumpur
Tel.: (+603) 62753120
Hilllside Business Park
Kempson Way
Tel.: (+420) 24 14 08 419
Bury St. Edmunds
MEXICO
DENMARK
Suffolk IP32 7EA
Nilfisk-Advance de Mexico, S. de R.L. de C.V.
Prol. Paseo de la Reforma 61, 6-A2
Col. Paseo de las Lomas
Nilfisk-Advance A/S
Industrivej 1
Tel.: (+49) 01284 763163
E-mail: sales.uk@nilfisk-advance.com
9560 Hadsund
01330 Mexico, D.F.
Tel: +52 55 2591 1002 (switchboard)
E-mail: [email protected]
Tel.: +45 7218 2100
E-mail: salg.dk@nilfisk-advance.com
UNITED ARAB EMIRATES
Nilfisk-Advance Middle East Branch
SAIF-Zone
FINLAND
P.O. Box 122298
NEW ZEALAND
Nilfisk-Advance
Danish House
6 Rockridge Avenue
Penrose, Auckland 1135
Tel.: (+64) 95 25 00 92
Nilfisk-Advance Oy Ab
Piispantilankuja 4
Sharjah
Tel.: (+971) 553 2626 82
02240 Espoo
Tel.: +358 207 890 600
E-mail: asiakaspalvelu.fi@nilfisk.com
USA
Nilfisk-Advance Inc.
14600 21st Avenue North
Plymouth, MN 55447-3408
Tel.: (+1) 763 745 3500
FRANCE
Nilfisk-Advance
26 Avenue de la Baltique
Villebon sur Yvette
91944 Courtabouef Cedex
Tel.: (+33) 1 69 59 87 00
E-mail: info.fr@nilfisk-advance.com
NORWAY
Nilfisk-Advance AS
Bjørnerudveien 24
1266 Oslo
VIETNAM
Tel.: (+47) 22 75 17 70
E-mail: info.no@nilfisk.com
Nilfisk-Advance Representative Office
No. 51 Doc Ngu Str.
Ba Dinh Dist.
Hanoi
Tel.: (+04) 761 5642
E-mail: nilfi[email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|