DIGITAL CAMERA
Reference Manual
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Read This First
thoroughly and keep them where they will be read by all who use the camera.
•
If you want to start using the camera right away, see “Preparing for
Other Information
•
Symbols and Conventions
Symbol
Description
This icon marks cautions and information that should be read
before using the camera.
B
This icon marks notes and information that should be read
before using the camera.
C
A
This icon marks other pages containing relevant information.
•
SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this
manual.
•
•
The setting at the time of purchase is referred to as the “default setting.”
The names of menu items displayed in the camera monitor, and the names
of buttons or messages displayed on a computer monitor appear in bold.
In this manual, images are sometimes omitted from monitor display samples
so that monitor indicators can be more clearly shown.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
i
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support
and education, continually updated information is available online at the following
websites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these websites to keep up-to-date with the latest product information, tips,
answers to frequently asked questions (FAQs), and general advice on digital imaging
and photography. Additional information may be available from the Nikon
representative in your area. Visit the website below for contact information.
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex
electronic circuitry. Only Nikon brand electronic accessories (including battery
chargers, batteries, Charging AC Adapters, AC adapters and, USB cables) certified by
Nikon specifically for use with this Nikon digital camera are engineered and proven
to operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA
AND MAY VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon
holographic seal could interfere with normal operation of the camera or result in the
batteries overheating, igniting, rupturing, or leaking.
Holographic seal: Identifies this
device as an authentic Nikon product.
For more information about Nikon brand accessories, contact a local authorized
Nikon dealer.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking
the camera on a trip), take a test shot to ensure that the camera is functioning
normally. Nikon will not be held liable for damages or lost profits that may result from
product malfunction.
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
About the Manuals
• No part of the manuals included with this product may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form, by any means, without Nikon’s prior written permission.
• Illustrations and monitor content shown in this manual may differ from the actual
product.
• Nikon reserves the right to change the specifications of the hardware and software
described in these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this
product.
• While every effort was made to ensure that the information in these manuals is
accurate and complete, we would appreciate it were you to bring any errors or
omissions to the attention of the Nikon representative in your area (address
provided separately).
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or
reproduced by means of a scanner, digital camera or other device may be
punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local
government bonds, even if such copies or reproductions are stamped “Sample.” The
copying or reproduction of paper money, coins, or securities which are circulated in a
foreign country is prohibited. Unless the prior permission of the government was
obtained, the copying or reproduction of unused postage stamps or post cards
issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified
documents stipulated by law is prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued
by private companies (shares, bills, checks, gift certificates, etc.), commuter passes, or
coupon tickets, except when a minimum of necessary copies are to be provided for
business use by a company. Also, do not copy or reproduce passports issued by the
government, licenses issued by public agencies and private groups, ID cards and
tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music,
paintings, woodcut prints, maps, drawings, movies, and photographs is governed by
national and international copyright laws. Do not use this product for the purpose of
making illegal copies or to infringe copyright laws.
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory
cards or built-in camera memory does not completely erase the original image data.
Deleted files can sometimes be recovered from discarded storage devices using
commercially available software, potentially resulting in the malicious use of personal
image data. Ensuring the privacy of such data is the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person,
erase all data using commercial deletion software, or format the device and then
completely refill it with images containing no private information (for example,
images of empty sky). Care should be taken to avoid injury or damage to property
when physically destroying data storage devices.
To delete the Wi-Fi settings, select Restore default settings in the Wi-Fi options
Conformity Marking
Follow the procedure below to display some of the conformity markings that the
camera complies with.
Press the dbutton Mzmenu icon MConformity marking Mkbutton
Download from Www.Somanuals.com. All Manuals Search And Download.
v
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others,
read the following safety precautions in their entirety before using this
equipment. Keep these safety instructions where all those who use the product
will read them.
The consequences that could result from failure to observe the precautions
listed in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using
this Nikon product, to prevent possible injury.
WARNINGS
Turn off in the event of malfunction
Should you notice smoke or an unusual smell coming from the camera or
Charging AC Adapter, unplug the Charging AC Adapter and remove the
battery immediately, taking care to avoid burns. Continued operation could
result in injury. After removing or disconnecting the power source, take the
equipment to a Nikon-authorized service representative for inspection.
Do not disassemble
Touching the internal parts of the camera or Charging AC Adapter could result
in injury. Repairs should be performed only by qualified technicians. Should the
camera or Charging AC Adapter break open as the result of a fall or other
accident, take the product to a Nikon-authorized service representative for
inspection, after unplugging the product and/or removing the battery.
Do not use the camera or Charging AC Adapter in the presence of
flammable gas
Do not use electronic equipment in the presence of flammable gas, as this
could result in explosion or fire.
Handle the camera strap with care
Never place the strap around the neck of an infant or child.
Keep out of reach of children
Particular care should be taken to prevent infants from putting the battery or
other small parts into their mouths.
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
Do not remain in contact with the camera, Charging AC Adapter,
or AC adapter for extended periods while the devices are on or in
use
Parts of the devices become hot. Leaving the devices in direct contact with the
skin for extended periods may result in low-temperature burns.
Do not leave the product where it will be exposed to extremely
high temperatures, such as in an enclosed automobile or in direct
sunlight
Failure to observe this precaution could cause damage or fire.
Observe caution when handling the battery
The battery may leak, overheat, or explode if improperly handled. Observe the
following precautions when handling the battery for use in this product:
•
Before replacing the battery, turn the product off. If you are using the
Charging AC Adapter/AC adapter, be sure it is unplugged.
Use only a Rechargeable Li-ion Battery EN-EL19 (included). Charge the
battery by using a camera that supports battery charging. To perform this
operation, use the Charging AC Adapter EH-71P/EH-71PCH (included) and
USB Cable UC-E21 (included). The Battery Charger MH-66 (available
separately) is also available to charge the battery without using a camera.
When inserting the battery, do not attempt to insert it upside down or
backwards.
•
•
•
Do not short or disassemble the battery or attempt to remove or break the
battery insulation or casing.
•
•
•
Do not expose the battery to flame or to excessive heat.
Do not immerse in or expose to water.
Put the battery in a plastic bag, etc. in order to insulate it before transporting.
Do not transport or store with metal objects such as necklaces or hairpins.
The battery is prone to leakage when fully discharged. To avoid damage to
the product, be sure to remove the battery when no charge remains.
Discontinue use immediately should you notice any change in the battery,
such as discoloration or deformation.
•
•
•
If liquid from the damaged battery comes in contact with clothing or skin,
rinse immediately with plenty of water.
Observe the following precautions when handling the Charging
AC Adapter
Keep dry. Failure to observe this precaution could result in fire or electric
shock.
Dust on or near the metal parts of the plug should be removed with a dry
cloth. Continued use could result in fire.
Do not handle the plug or go near the Charging AC Adapter during
lightning storms. Failure to observe this precaution could result in electric
shock.
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
•
Do not damage, modify, forcibly tug or bend the USB cable, place it under
heavy objects, or expose it to heat or flames. Should the insulation be
damaged and the wires become exposed, take it to a Nikon-authorized
service representative for inspection. Failure to observe these precautions
could result in fire or electric shock.
•
•
Do not handle the plug or Charging AC Adapter with wet hands. Failure to
observe this precaution could result in electric shock.
Do not use with travel converters or adapters designed to convert from one
voltage to another or with DC-to-AC inverters. Failure to observe this
precaution could damage the product or cause overheating or fire.
Use the appropriate power supply (battery, Charging AC adapter,
AC adapter, USB cable)
Using a power supply other than those provided or sold by Nikon could result
in damage or malfunction.
Use appropriate cables
When connecting cables to the input and output jacks, use only the cables
provided or sold by Nikon for the purpose, to maintain compliance with
product regulations.
Do not touch the moving parts of the lens
Failure to observe this precaution could result in injury.
Handle moving parts with care
Be careful that your fingers or other objects are not pinched by the lens cover
or other moving parts.
Using the flash close to your subject’s eyes could cause temporary
visual impairment
The flash should be no less than 1 meter (3 ft 4 in.) from the subject.
Particular care should be observed when photographing infants.
Do not operate the flash with the flash window touching a person
or object
Failure to observe this precaution could result in burns or fire.
Avoid contact with liquid crystal
Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent liquid crystal from the monitor touching the skin
or entering the eyes or mouth.
Follow the instructions of airline and hospital personnel
Download from Www.Somanuals.com. All Manuals Search And Download.
viii
Notices
Notices for Customers in the U.S.A.
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug adapter of
the proper configuration for the power outlet if needed.
The power supply unit is intended to be correctly orientated in a vertical or
floor mount position.
Federal Communications Commission (FCC) Radio Frequency
Interference Statement
This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC
rules. These limits are designed
to provide reasonable
protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/television technician for help.
CAUTIONS
Modifications
The FCC requires the user to be notified that any changes or modifications
made to this device that are not expressly approved by Nikon Corporation may
void the user’s authority to operate the equipment.
Interface Cables
Use the interface cables sold or provided by Nikon for your equipment. Using
other interface cables may exceed the limits of Class B Part 15 of the FCC rules.
Download from Www.Somanuals.com. All Manuals Search And Download.
ix
Notice for Customers in the State of California
WARNING
Handling the cord on this product will expose you to lead, a chemical known to
the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.
Tel: 631-547-4200
Notice for Customers in Canada
CAN ICES-3 B / NMB-3 B
Notices for Customers in Europe
CAUTIONS
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This symbol indicates that electrical and electronic equipment is to
be collected separately.
The following apply only to users in European countries:
•
•
•
This product is designated for separate collection at an
appropriate collection point. Do not dispose of as household
waste.
Separate collection and recycling helps conserve natural resources and
prevent negative consequences for human health and the environment
that might result from incorrect disposal.
For more information, contact the retailer or the local authorities in charge
of waste management.
This symbol on the battery indicates that the battery is to be
collected separately.
The following apply only to users in European countries:
•
All batteries, whether marked with this symbol or not, are
designated for separate collection at an appropriate collection
point. Do not dispose of as household waste.
•
For more information, contact the retailer or the local authorities in charge
of waste management.
Download from Www.Somanuals.com. All Manuals Search And Download.
x
Wi-Fi (Wireless LAN Network)
This product is controlled by the United States Export Administration
Regulations, and you are required to obtain permission from the United States
government if you export or re-export this product to any country to which the
United States embargoes goods. The following countries were subject to
embargo: Cuba, Iran, North Korea, Sudan, and Syria. Since the target countries
are subject to change, please contact the United States Department of
Commerce for the latest information.
Restrictions on Wireless Devices
The wireless transceiver included in this product conforms to wireless
regulations in the country of sale and is not for use in other countries (products
purchased in the EU or EFTA can be used anywhere within the EU and EFTA).
Nikon does not accept liability for use in other countries. Users who are unsure
as to the original country of sale should consult with their local Nikon service
center or Nikon-authorized service representative. This restriction applies to
wireless operation only and not to any other use of the product.
Notice for Customers in the U.S.A. and Canada
Federal Communications Commission (FCC) and Industry of Canada
(IC)
Declaration of Conformity
This device complies with Part 15 of FCC Rules and Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of this
device.
FCC/IC RF Exposure Statement
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however,
that these low power wireless devices are absolutely safe. Low power wireless
devices emit low levels of radio frequency energy (RF) in the microwave range
while being used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure of low-level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low-level RF
exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings have not been
confirmed by additional research.
Download from Www.Somanuals.com. All Manuals Search And Download.
xi
COOLPIX S7000, which is equipped with a WSDB-686GN (FCC
ID:2AAD3AA1G0J0 / IC ID: 4634A-2150EC) Wireless LAN Module, has been
tested and found to comply with FCC/IC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. Please refer to the SAR test report that was
uploaded to FCC website.
Declaration of Conformity (Europe)
Hereby, Nikon Corporation, declares that COOLPIX S7000 is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/
EC. The declaration of conformity may be consulted at
http://imaging.nikon.com/support/pdf/DoC_S7000.pdf.
Notice for Customers in Jamaica
This product contains a Type Approved Module by Jamaica: “SMA – WSDB-
686GN”
Download from Www.Somanuals.com. All Manuals Search And Download.
xii
Precautions when Using Radio Transmissions
Always keep in mind that radio transmission or reception of data is subject to
interception by third parties. Note that Nikon is not responsible for data or
information leaks that may occur during data transfer.
Personal Information Management and Disclaimer
•
User information registered and configured on the product, including
wireless LAN connection settings and other personal information, is
susceptible to alteration and loss resulting from operational error, static
electricity, accident, malfunction, repair or other handling. Always keep
separate copies of important information. Nikon is not responsible for any
direct or indirect damages or lost profits resulting from alteration or loss of
content that is not attributable to Nikon.
•
Before discarding this product or transferring it to another owner, perform
and configured with the product, including wireless LAN connection
settings and other personal information.
Download from Www.Somanuals.com. All Manuals Search And Download.
xiii
Table of Contents
Introduction ................................................................................................................. i
Other Information......................................................................................................................................... i
Information and Precautions............................................................................................................... iii
For Your Safety ......................................................................................................................... vi
Notices......................................................................................................................................... ix
Wi-Fi (Wireless LAN Network).............................................................................................. xi
Parts of the Camera .................................................................................................. 1
The Camera Body...................................................................................................................... 1
The Monitor ................................................................................................................................ 3
Insert the Battery and Memory Card ................................................................................. 7
Removing the Battery or Memory Card......................................................................................... 7
Charge the Battery ................................................................................................................... 8
Shooting with A(Auto) Mode......................................................................................... 12
Play Back Images..................................................................................................................... 16
Delete Images .......................................................................................................................... 17
Using the Flash, Self-timer, Etc........................................................................................... 20
Recording Movies................................................................................................................... 20
Download from Www.Somanuals.com. All Manuals Search And Download.
xiv
A(Auto) Mode ...................................................................................................................... 21
Flash Mode................................................................................................................................ 41
Self-timer ................................................................................................................................... 43
Creative Slider (Adjusting Brightness (Exposure Compensation),
Exposure Compensation (Adjusting Brightness) ........................................................ 49
Default Settings (Flash, Self-timer, Etc.).......................................................................... 50
Using Target Finding AF....................................................................................................................... 52
Using Face Detection............................................................................................................................. 53
Download from Www.Somanuals.com. All Manuals Search And Download.
xv
Playback Features.................................................................................................... 58
Playback Zoom ........................................................................................................................ 58
Thumbnail Playback/Calendar Display........................................................................... 59
List by Date Mode................................................................................................................... 60
Deleting Images in a Sequence....................................................................................................... 62
Editing Images (Still Images) .............................................................................................. 63
Before Editing Images............................................................................................................................ 63
Recording and Playing Back Movies................................................................. 69
Capturing Still Images While Recording Movies ......................................................... 72
Operations During Movie Playback ................................................................................. 73
The Shooting Menu (for A(Auto) Mode).................................................................... 80
Continuous Shooting............................................................................................................................. 82
The Smart Portrait Menu...................................................................................................... 89
Download from Www.Somanuals.com. All Manuals Search And Download.
xvi
The Playback Menu................................................................................................................ 91
Mark for Wi-Fi Upload ........................................................................................................................... 91
Rotate Image .............................................................................................................................................. 93
Wind Noise Reduction........................................................................................................................ 103
The Wi-Fi Options Menu.................................................................................................... 104
The Setup Menu................................................................................................................... 106
Monitor Settings..................................................................................................................................... 108
Date Stamp................................................................................................................................................ 110
Photo VR ...................................................................................................................................................... 111
Digital Zoom............................................................................................................................................. 112
Language.................................................................................................................................................... 114
Firmware Version .................................................................................................................................. 116
Installing the Software on the Smart Device ............................................................. 117
Connecting the Smart Device to the Camera............................................................ 118
a Smart Device...................................................................................................................... 120
Download from Www.Somanuals.com. All Manuals Search And Download.
xvii
Connecting the Camera to a TV (Playback on a TV) ................................................ 123
Connecting the Camera to a Printer (Direct Print)................................................... 124
Connecting the Camera to a Printer.......................................................................................... 124
Printing Images One at a Time...................................................................................................... 125
Printing Multiple Images................................................................................................................... 126
Caring for the Product ....................................................................................................... 131
The Battery ................................................................................................................................................. 132
Cleaning and Storage......................................................................................................... 135
Storage ......................................................................................................................................................... 135
Error Messages...................................................................................................................... 136
Troubleshooting .................................................................................................................. 140
File Names .............................................................................................................................. 147
Optional Accessories .......................................................................................................... 148
Specifications ........................................................................................................................ 149
Index......................................................................................................................................... 155
Download from Www.Somanuals.com. All Manuals Search And Download.
xviii
Parts of the Camera
The Camera Body
1
2
3 4
5
14
13
6
7
12
11
8
9
10
Lens cover closed
Lens
1
2
3
7
8
9
10
11
12
Lens cover
h: Thumbnail playback
Speaker
4
HDMI micro connector (Type D)
.................................................................... 121
13
14
5
6
AF-assist illuminator
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1
2
3
4
5
6
7
13
12
8
9
11
10
Charge lamp.............................................8
d(menu) button
1
2
8
9
b(emovie-record) button
Battery-chamber/
Power connector cover (for
optional AC adapter)
3
4
5
6
7
10
Tripod socket ..................................... 151
Monitor........................................................3
11
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2
The Monitor
The information that is displayed in the monitor during shooting and playback
changes depending on the camera’s settings and state of use.
By default, information is displayed when the camera is turned on and when
you operate the camera, and turns off after a few seconds (when Photo info is
Shooting Mode
6
7
8
2
3
4
AF
5
1
9
10
10
11
12
+1.0
13
14
29
m
0s
400
1/250
F3.4
999
999
15
9999
18 17
16
Shooting mode
Movie VR icon.................................... 102
10
11
12
1
2
3
4
5
Exposure compensation value
............................................................... 47, 49
13
14
15
Remaining movie recording time
....................................................................... 69
Movie options (normal speed
6
Number of exposures remaining
7
8
9
16
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3
HDR
41
46
44
45
43
40
39
10
2
38
H
42
L
120
60
10
37
35
34
36
30
29
33
32
+1.0
PRE
29
m
0s
400
1/250
F3.4
999
31
23
28
27
22 21 20 19
26
25 24
32
Focus area (target finding AF)
Hue...................................................... 35, 46
19
20
21
22
33
34
35
36
37
38
39
40
41
42
43
44
45
Focus area (manual or center)
Focus area (face detection,
Focus area (subject tracking)
23
24
Charging AC Adapter connection
indicator
25
Date stamp.......................................... 110
“Date not set” indicator ............... 141
26
27
Wi-Fi communication indicator
28
Still image capture (during movie
Travel destination icon................. 106
29
30
31
46
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Playback Mode
2
4
6
1
3
5
7
8
9
999
/
999
10
11
9999
/
9999
999 999
/
29
29
m
m
00s
00s
9999. JPG
15/11/2015 15:30
Internal memory indicator
1
2
7
8
9
Sequence display (when
Individual pictures is selected)
3
Current image number/
total number of images
10
4
5
6
Movie length or elapsed playback
time
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5
999/999
12
13
14
9999. JPG
24
15/11/2015 15:30
15
16
21 20
23 22
19 18
17
Quick effects guide
Easy panorama playback guide
Sequence playback guide
Movie playback guide
12
13
14
15
16
17
18
19
Time of recording
20
21
22
Date of recording
Charging AC Adapter connection
indicator
23
24
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Preparing for Shooting
Insert the Battery and Memory Card
Battery latch Memory card slot
•
With the battery’s positive and negative terminals oriented correctly, move
the orange battery latch (3), and fully insert the battery (4).
Slide the memory card in until it clicks into place (5).
Be careful not to insert the battery or memory card upside-down or
backward, as this could cause a malfunction.
•
•
B Formatting a Memory Card
The first time you insert a memory card that has been used in another device into
this camera, make sure to format it with this camera. Insert the memory card into the
Removing the Battery or Memory Card
Turn the camera off and make sure that the power-on lamp and monitor have
turned off, and then open the battery-chamber/memory card slot cover.
•
•
Move the battery latch to eject the battery.
Gently push the memory card into the camera to partially eject the memory
card.
•
Be careful when handling the camera, battery, and memory card
immediately after using the camera, as they may become hot .
Memory Cards and Internal Memory
Camera data, including images and movies, can be saved either on a memory
card or in the camera’s internal memory. To use the camera’s internal memory,
remove the memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Charge the Battery
1
With the battery installed, connect the camera to an
electrical outlet.
Charging AC Adapter
Electrical outlet
USB cable (included)
Charge lamp
If a plug adapter* is included with your camera, securely connect it to the
Charging AC Adapter. Once the two are connected, attempting to forcibly
remove the plug adapter could damage the product.
*
The shape of the plug adapter varies according to the country or region in
which the camera was purchased. This step can be omitted if the plug
adapter comes permanently bonded to the Charging AC Adapter.
The charge lamp slowly flashes green to indicate that the battery is charging.
When charging is complete, the charge lamp turns off. It takes about 1 hour
and 50 minutes to charge a fully exhausted battery.
•
•
•
The battery cannot be charged when the charge lamp quickly flashes green,
possibly due to one of the reasons described below.
-
-
-
The ambient temperature is not suited to charging.
The USB cable or Charging AC Adapter is not properly connected.
The battery is damaged.
2
Disconnect the Charging AC Adapter from the electrical
outlet and then disconnect the USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
B Notes About the USB Cable
• Do not use a USB cable other than the UC-E21. Using a USB cable other than the
UC-E21 could result in overheating, fire or electric shock.
• Make sure that the plugs are properly oriented. Do not insert or remove the plugs
at an angle when connecting or disconnecting them.
B Notes About Charging the Battery
• The camera can be operated while the battery is charging, but the charging time
increases.
• If the battery level is extremely low, you may not be able to operate the camera
while the battery is charging.
• Do not, under any circumstances, use another make or model of AC adapter other
than Charging AC Adapter EH-71P/EH-71PCH, and do not use a commercially
available USB-AC adapter or a battery charger for a mobile phone. Failure to
observe this precaution could result in overheating or in damage to the camera.
C Charging Using a Computer or Battery Charger
• You can also charge the battery by connecting the camera to a computer.
• You can use the Battery Charger MH-66 (available separately) to charge the battery
without using the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Turn the Camera On and Set the Display
Language, Date, and Time
When the camera is turned on for the first time, the language-selection screen
and the date and time setting screen for the camera clock are displayed.
1
2
Press the power switch to turn on
the camera.
•
The monitor turns on.
•
To turn the camera off, press the power
switch again.
Language
Български
Use the multi selector
HIto select the
desired language and
press the kbutton.
Čeština
Dansk
Deutsch
English
Español
Cancel
3
4
Select Yes and press the kbutton.
Select your home
time zone and press
the kbutton.
London, Casablanca
•
Press Hto display W
above the map and enable
daylight saving time. Press
Ito disable it.
Back
5
Use HIto select the date format and press the kbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Date and time
6
7
Set the date and time, and press
the kbutton.
D
M
Y
h
m
•
Use JKto select a field and then use HI
to set the date and time.
15 11 2015 15 30
•
Select the minute field and press the k
button to confirm the setting.
Edit
When the confirmation dialog is displayed, use HIto
select Yes and press the kbutton.
•
When settings are finished, the lens extends and the camera switches to
shooting mode.
C Changing the Language or the Date and Time Setting
• You can change these settings using the Language and Time zone and date
• You can enable or disable daylight saving time in the zsetup menu by selecting
Time zone and date followed by Time zone. Press the multi selector Kand then
Hto enable daylight saving time and move the clock forward one hour, or Ito
disable daylight saving time and move the clock back one hour.
C The Clock Battery
• The camera’s clock is powered by a built-in backup battery.
The backup battery charges when the main battery is inserted into the camera or
when the camera is connected to an optional AC adapter, and it can run the clock
for several days after about 10 hours of charging.
• If the camera’s backup battery becomes exhausted, the date and time setting
screen is displayed when the camera is turned on. Set the date and time again
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Basic Shooting and Playback
Operations
Shooting with A(Auto) Mode
1
Rotate the mode dial to A.
•
The camera enters A(auto) mode and can
be used for general shooting.
•
•
Battery level indicator
b: The battery level is high.
B: The battery level is low.
Number of exposures remaining
C is displayed when no memory card is
inserted in the camera, and images are
saved in the internal memory.
Number of exposures
remaining
25
m
0s
880
Battery level indicator
2
Hold the camera steady.
•
Keep fingers and other objects away from
the lens, flash, AF assist-illuminator,
microphone, and speaker.
•
When taking pictures in portrait (“tall”)
orientation, turn the camera so that the
flash is above the lens.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
3
4
Frame the picture.
•
Move the zoom control to change the
zoom lens position.
Zoom out
Zoom in
Press the shutter-release button
halfway.
•
When the subject is in focus, the focus
area or focus indicator is displayed in
green.
•
When you are using digital zoom, the
camera focuses in the center of the
frame and the focus area is not
displayed.
•
If the focus area or focus indicator
flashes, the camera is unable to focus.
Modify the composition and try pressing
the shutter-release button halfway
again.
1/250
F3.4
5
Without lifting your finger, press
the shutter-release button the rest
of the way down.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
B Notes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing
the remaining recording time flashes while images or movies are being saved. Do
not open the battery-chamber/memory card slot cover or remove the
battery or memory card while an indicator is flashing. Doing this could result in
loss of data, or in damage to the camera or the memory card.
C The Auto Off Function
• When no operations are performed for about one minute, the monitor turns off,
the camera enters standby mode, and then the power-on lamp flashes. The
camera turns off after remaining in standby mode for about three minutes.
• To turn the monitor back on while the camera is in standby mode, perform an
operation such as pressing the power switch or shutter-release button.
C When Using a Tripod
• We recommend using a tripod to stabilize the camera in the following situations:
- When the zoom is at a telephoto position
• When using a tripod to stabilize the camera during shooting, set Photo VR to Off
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Using the Zoom
When you move the zoom control, the zoom
lens position changes.
Wide-angle
Telephoto
•
•
To zoom in: Move toward g
To zoom out: Move toward f
When you turn the camera on, the zoom
moves to the maximum wide-angle
position.
•
•
A zoom indicator is displayed on the
shooting screen when the zoom control is
moved.
Digital zoom, which allows you to further
magnify the subject up to approximately 4×
the maximum optical zoom ratio, can be
Optical Digital
zoom zoom
activated by moving and holding the zoom control toward gwhen the
camera is zoomed in to the maximum optical zoom position.
C Digital Zoom
The zoom indicator changes to blue when the digital zoom is activated, and it
changes to yellow when the zoom magnification is increased further.
• Zoom indicator is blue: Image quality is not noticeably reduced by using the
Dynamic Fine Zoom.
• Zoom indicator is yellow: There may be cases in which image quality is noticeably
reduced.
• The indicator remains blue across a wider area when the image size is smaller.
• The zoom indicator may not change to blue when using certain continuous
shooting settings or other settings.
The Shutter-release Button
To set focus and exposure (shutter speed and
aperture value), press the shutter-release button
lightly until you feel a slight resistance. Focus and
exposure remain locked while the shutter-release
button is pressed halfway.
Press halfway
Press the shutter-release button all the way to
release the shutter and take a picture.
Do not use force when pressing the shutter-release
button, as this may result in camera shake and
blurred images. Press the button gently.
Press all the
way
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Play Back Images
1
Press the c(playback) button to
enter playback mode.
•
If you press and hold down the cbutton
while the camera is turned off, the camera
turns on in playback mode.
2
Use the multi selector to select an Display the previous image
image to display.
•
Press and hold down HIJKto scroll
through the images quickly.
•
To return to shooting mode, press the c
button or shutter-release button.
Display the next image
•
When e is displayed in full-frame
playback mode, you can press the k
button to apply an effect to the image.
4
/
4
0004. JPG
15/11/2015 15:30
•
•
Move the zoom control
toward g(i) in full-frame
playback mode to zoom in
on an image.
3.0
In full-frame playback mode,
move the zoom control
toward f(h) to switch to
thumbnail playback mode
and display multiple images
on the screen.
1 / 20
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Delete Images
1
Press the l(delete) button to
delete the image currently
displayed in the monitor.
2
3
Use the multi selector HIto
select the desired deletion
method and press the kbutton.
Delete
Current image
Erase selected images
All images
•
To exit without deleting, press the d
button.
Select Yes and press the k
button.
Erase 1 image?
•
Deleted images cannot be recovered.
Yes
No
B Deleting Images Captured Continuously (Sequence)
• Images captured continuously are saved as a
sequence, and only the first image of the
sequence (the key picture) is displayed in
playback mode.
1
/
5
• If you press the lbutton while a key picture is
displayed for a sequence of images, all images in
the sequence are deleted.
0004. JPG
15/11/2015 15:30
• To delete individual images in a sequence, press
the kbutton to display them one at a time and press the lbutton.
C Deleting the Image Captured While in Shooting Mode
When using shooting mode, press the lbutton to delete the last image that was
saved.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Operating the Erase Selected Images Screen
1
Use the multi selector JKto
select an image to be deleted, and
then use HIto display K.
Erase selected images
•
To undo the selection, press HIto
remove K.
•
to switch to full-frame playback or f(h)
to switch to thumbnail playback.
Back
2
Add K to all images that you want to delete and then press
the kbutton to confirm the selection.
•
A confirmation dialog is displayed. Follow the on-screen instructions to
complete operations.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Changing the Shooting Mode
Rotate the mode dial to select one of the
following shooting modes.
• A(Auto) mode
Used for general shooting. Settings can be changed to suit the shooting
conditions and the type of shot that you want to capture.
• x, y, X, W(Scene) modes
Camera settings are optimized according to the scene that you select.
- x(scene auto selector): The camera automatically recognizes the
shooting scene when you frame a picture, making it easier to shoot
pictures using settings that suit the scene.
- y: Press the dbutton and select a scene.
In time-lapse movie scene mode, the camera can automatically capture
300 still images at a specified interval to create time-lapse movies
(e1080/30p) that are approximately 10 seconds long.
- X(night landscape): Use this mode to shoot night landscapes.
- W(backlighting): Fill flash fires to prevent the backlit subject from
being hidden in shadow, or the HDR function can be used to shoot
scenes with high contrast.
• u(Special effects) mode
Effects can be applied to images during shooting. Press the dbutton to
select the effect.
• F(Smart portrait) mode
Use glamour retouch to enhance human faces during shooting, and use the
smile timer or self-collage function to take pictures.
• n(Short movie show) mode
You can create a short movie (e 1080/30p or S 1080/25p) that is up
to 30 seconds long by recording and automatically combining multiple
movie clips that are several seconds long.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Using the Flash, Self-timer, Etc.
When the shooting screen is displayed, you can press the multi selector H(m)
J(n) I(p) K(o) to set the functions described below.
• mFlash mode
You can select a flash mode to match the shooting conditions.
• nSelf-timer
The camera releases the shutter 10 seconds or 2 seconds after you press the
shutter-release button.
• pMacro mode
Use macro mode when you take close-up pictures.
• oCreative slider (obrightness (exposure compensation),
G vividness, and F hue)
In A(auto) mode, you can adjust overall image brightness, vividness, and
hue.
In scene mode, special effects mode, or short movie show mode, you can
adjust overall image brightness (exposure compensation).
In smart portrait mode, you can apply glamour retouch to enhance human
faces.
The functions that can be set vary depending on the shooting mode.
Recording Movies
Display the shooting screen and press the b(e
movie-record) button to start recording a movie.
Press the b(e) button again to end recording.
•
To play back a movie, select a movie in full-
frame playback mode and press the kbutton.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Shooting Features
A(Auto) Mode
Used for general shooting. Settings can be
adjusted to suit the shooting conditions and the
type of shot you want to capture.
•
You can change how the camera selects the
area of the frame to focus on by changing the
The default setting is Target finding AF
Functions Available in A(Auto) Mode
•
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Scene Mode (Shooting Suited to Scenes)
When a scene is selected, camera settings are automatically optimized for the
selected scene.
x(Scene auto
X(Night landscape)
1,2
W(Backlighting)
When you frame a
picture, the camera
automatically selects
the optimum scene
for simpler shooting.
2
Rotate the mode dial
to X, or Wand take
pictures.
y(Scene)
Press the dbutton to display the scene menu and select one of the following
shooting scenes.
2, 3
b
c
N
d
e
f
Z
z
Portrait (default setting)
h
i
k
u
Sunset
1, 2
1, 2, 3
Landscape
Dusk/dawn
2
1, 3
m
p
O
2
2
Beach
2
Snow
Portrait
Landscape
Time-lapse movie
Sports
Night portrait
Party/indoor
1
2
3
The camera focuses at infinity.
The camera focuses on the area in the center of the frame.
Use of a tripod is recommended, because the shutter speed is slow. Set Photo VR
during shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Displaying a Description of Each Scene Mode (Help Display)
Select a scene and move the zoom control
that scene. To return to the previous screen,
move the zoom control toward g(j) again.
Portrait
Landscape
Time-lapse movie
Sports
Night portrait
Party/indoor
Tips and Notes
xScene auto selector
•
When you point the camera at the subject, the camera automatically
recognizes the shooting scene mode from the list below and adjusts the
shooting settings accordingly.
e
Portrait (for taking close-up portraits of one or two people)
Portrait (for taking portraits of large numbers of people, or images in
which the background takes up a large portion of the frame)
b
f
h
Landscape
Night portrait (for taking close-up portraits of one or two people)
Night portrait (for taking portraits of large numbers of people, or images
in which the background takes up a large portion of the frame)
c
g
i
j
d
d
Night landscape
Close-up
Backlighting (for taking pictures of subjects other than people)
Backlighting (for taking portrait pictures)
Other scenes
• The focus area depends on the composition of the image. When the camera
• Depending on shooting conditions, the camera may not select the desired scene
Download from Www.Somanuals.com. All Manuals Search And Download.
23
XNight landscape
• Press the dbutton, and select u Hand-held or w Tripod from Night
landscape.
• u Hand-held (default setting):
- While the jicon on the shooting screen is displayed in green, press the
shutter-release button all the way to capture a series of images which are
combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until
a still image is displayed. After taking a picture, do not turn the camera off before
the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
• w Tripod:
- One image is captured at a slow shutter speed when the shutter-release button
is pressed all the way.
is set to On.
WBacklighting
• Press the dbutton, and select On or Off to enable or disable HDR (high
dynamic range) composition from Backlighting based on the type of image you
want to capture.
• Off (default setting): The flash fires to prevent the subject from being hidden in
shadow.
- When the shutter-release button is pressed all the way down, one image is
captured.
• On: Use when taking pictures with very bright and dark areas in the same frame.
- When the shutter-release button is pressed all the way, the camera shoots
images continuously at high speed, and saves the following two images:
-
-
A non-HDR composite image
An HDR composite image in which the loss of details in highlights or shadows
is minimized
- If there is only enough memory to save one image, an image processed by D-
corrected, is the only image saved.
- Once the shutter-release button is pressed all the way, hold the camera still until
a still image is displayed. After taking a picture, do not turn the camera off before
the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen in the monitor at the time of shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
yMdSports
• While the shutter-release button is held all the way down, the camera shoots up to
about 7 images continuously at a rate of about 7.9 fps (when image mode is set to
P).
• The frame rate for continuous shooting may vary depending on the current image
mode setting, the memory card used, or shooting conditions.
• Focus, exposure, and hue are fixed at the values determined with the first image in
each series.
yMeNight portrait
• On the screen displayed when eNight portrait is selected, select u Hand-held
or w Tripod.
• u Hand-held (default setting):
- While the eicon on the shooting screen is displayed in green, press the
shutter-release button all the way to capture a series of images which are
combined into a single image and saved.
- Once the shutter-release button is pressed all the way, hold the camera still until
a still image is displayed. After taking a picture, do not turn the camera off before
the monitor switches to the shooting screen.
- If the subject moves while the camera is shooting continuously, the image may
be distorted, overlapped, or blurred.
• w Tripod:
- One image is captured at a slow shutter speed when the shutter-release button
is pressed all the way.
is set to On.
yMfParty/indoor
• To avoid the effects of camera shake, hold the camera steady. Set Photo VR
during shooting.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
yMkClose-up
position at which it can focus.
• You can move the focus area. Press the kbutton, use the multi selector HIJK
to move the focus area, and press the kbutton to apply the setting.
yMuFood
position at which it can focus.
• You can adjust hue by using the multi selector
HI. The hue setting is saved in the camera’s
memory even after the camera is turned off.
• You can move the focus area. Press the kbutton,
use the multi selector HIJKto move the focus
area, and press the kbutton to apply the setting.
25
m
0s
880
yMmFireworks show
• The shutter speed is fixed at 4 seconds.
• The zoom is restricted to 4 fixed positions.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
yMO Pet portrait
• When you point the camera at a dog or cat, the camera detects the pet’s face and
focuses on it. By default, the camera detects a dog or cat face and automatically
releases the shutter (pet portrait auto release).
• On the screen displayed when O Pet portrait is selected, select U Single or V
Continuous.
- U Single: The camera captures one image when a dog or cat face is detected.
- V Continuous: The camera captures three images continuously when a dog
or cat face is detected.
B Pet Portrait Auto Release
• Press the multi selector J(n) to change the Pet portrait auto release setting.
- Y: The camera detects a dog or cat face and automatically releases the shutter.
- k: The camera does not release the shutter automatically, even if a dog or cat
face is detected. Press the shutter-release button. The camera also detects
human faces when k is selected.
• Pet portrait auto release is set to k after 5 bursts have been taken.
• Shooting is also possible by pressing the shutter-release button, regardless of the
Pet portrait auto release setting.
When V Continuous is selected, you can take pictures continuously while
holding down the shutter-release button all the way.
B Focus Area
• When the camera detects a face, the face is
displayed inside a yellow border. When the
camera acquires focus on a face displayed inside a
double border (focus area), the double border
changes to green. If no faces are detected, the
camera focuses on the subject in the center of the
25
m
0s
frame.
880
• Under some shooting conditions, the pet face
may not be detected and other subjects may be displayed inside a border.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Shooting Time-lapse Movies
The camera can automatically capture 300 still images at a specified interval to
create time-lapse movies (e1080/30p) that are approximately 10 seconds
long.
Rotate the mode dial to yMdbutton MN Time-lapse movie M
kbutton
Type
Interval time
Recording time
10 min
Cityscape (10 minutes)
(default setting)
O
2 s
P
Q
R
S
Landscape (25 minutes)
5 s
10 s
30 s
30 s
25 min
50 min
Sunset (50 minutes)
1, 2
Night sky (150 minutes)
2 h 30 min
2 h 30 min
2, 3
Star trails (150 minutes)
1
2
3
Suited for recording the movement of stars. The focus is fixed at infinity.
The zoom is restricted to 4 fixed positions.
Star movement appears as lines of light due to image processing. The focus is
fixed at infinity.
Time-lapse movie
1
2
Use the multi selector HIto
select a type, and press the k
button.
Cityscape (10 minutes)
Landscape (25 minutes)
Sunset (50 minutes)
Night sky (150 minutes)
Star trails (150 minutes)
Time-lapse movie
Select whether or not to fix
exposure (brightness), and press
the kbutton (except Night sky
and Star trails).
AE-L on
AE-L off
•
If AE-L on is selected, the exposure used for
the first image is used for all images. Use of
AE-L off is recommended when the
changes in brightness of the subject are
significant, such as in the twilight.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
3
4
Stabilize the camera by using a tool such as a tripod.
Press the shutter-release button to
AE-L
capture the first image.
22m 5s
•
releasing the shutter for the first image.
Exposure compensation cannot be changed
after the first image is captured. Focus and
hue are fixed when the first image is
captured.
End recording
•
•
•
•
The shutter is automatically released for the second and subsequent images.
The monitor may turn off while the camera is not capturing images.
Shooting ends automatically when 300 images are captured.
To end shooting manually before 300 images are captured, press the k
button.
•
Sound and still images cannot be saved.
B Notes About Time-lapse Movie
• The camera cannot capture images if a memory card is not inserted. Do not
exchange the memory card until shooting is complete.
• Use a fully charged battery to prevent the camera from turning off unexpectedly.
• Time-lapse movies cannot be recorded by pressing the b(e) button.
• Do not rotate the mode dial until shooting is complete.
set to On.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Shooting with Easy Panorama
Rotate the mode dial to yMdbutton MpEasy panorama M
kbutton
1
Select W Normal or X Wide
as the shooting range and press the
kbutton.
Easy panorama
Normal
Wide
•
-
-
When the camera is readied in the horizontal
position, the image size (width × height) is as
follows:
W Normal: 4800 × 920 when moved
horizontally, 1536 × 4800 when moved
vertically
X Wide: 9600 × 920 when moved horizontally, 1536 × 9600 when
moved vertically
2
3
4
Frame the first edge of the
panorama scene, and then press
the shutter-release button halfway
to focus.
•
The zoom position is fixed at wide-angle
position.
25
m
0s
•
The camera focuses in the center of the frame.
880
Press the shutter-release button all
the way, and then remove your
finger from the shutter-release
button.
•
KLJI are displayed to indicate the
direction of camera movement.
Move the camera in one of the four
directions until the guide indicator
reaches the end.
Guide
•
•
•
When the camera detects which direction it
is moving in, shooting begins.
Shooting ends when the camera captures
the specified shooting range.
Focus and exposure are locked until
shooting ends.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Example of camera movement
•
•
Using your body as the axis of rotation, move the camera slowly in an arc, in
the direction of the marking (KLJI).
Shooting stops if the guide does not reach the edge within about 15
seconds (when W Normal is selected) or within about 30 seconds (when
X Wide is selected) after shooting starts.
B Notes About Easy Panorama Shooting
• The range of the image seen in the saved image is narrower than that seen in the
monitor at the time of shooting.
• If the camera is moved too quickly or shaken too much, or if the subject is too
uniform (e.g. walls or darkness), an error may occur.
• If shooting is stopped before the camera reaches the half-way point in the
panorama range, a panorama image is not saved.
• If more than half of the panorama range is captured but shooting ends before
reaching the edge of the range, the range not captured is recorded and displayed
in gray.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Playback with Easy Panorama
image captured using easy panorama in full-
frame playback mode, and then press the k
button to scroll the image in the direction that
was used when shooting.
4
/
4
0004. JPG
15/11/2015 15:30
Playback controls are displayed in the monitor
during playback.
Use the multi selector JKto select a control,
and then press the kbutton to perform the
operations described below.
Function
Rewind
Icon
A
B
Description
Hold down the kbutton to scroll backward quickly.
Advance
Hold down the kbutton to scroll forward quickly.
Pause playback. The operations listed below can be
performed while paused.
C
D
F
Hold down the kbutton to rewind.
Hold down the kbutton to scroll.
Resume automatic scrolling.
Pause
End
E
G
Switch to full-frame playback mode.
B Notes About Easy Panorama Images
• The images cannot be edited on this camera.
• This camera may not be able to scroll the playback of, or zoom in on, easy
panorama images captured with another make or model of digital camera.
B Notes About Printing Panorama Images
The entire image may not be able to be printed depending on the printer’s settings.
Additionally, printing may not be possible depending on the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Special Effects Mode (Applying Effects
When Shooting)
Effects can be applied to images during shooting.
Image mode
Special effects
Special effects
Soft
Nostalggic sepia
High-conntraasstt mono.
Selective color
Pop
Cross process
Press the d(menu) button to display the special effects menu and select an effect
using the multi selector.
Type
O Soft*
(default setting)
Description
Softens the image by adding a slight blur to the entire
image.
P Nostalgic
sepia*
Adds a sepia tone and reduces the contrast to simulate
the qualities of an old photograph.
F High-contrast
mono.*
Changes the image to black and white and gives it sharp
contrast.
Creates a black and white image in which only the
specified color remains.
I Selective color
l Pop
Increases the color saturation of the entire image to create
a bright look.
Gives the image a mysterious appearance based on a
specific color.
o Cross process
m Toy camera
effect 1*
Gives the entire image a yellowish hue and darkens the
image periphery.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Type
Description
n Toy camera
effect 2*
Decreases the color saturation of the entire image and
darkens the image periphery.
Creates a bilaterally symmetric image whose right half is
an inverted mirror image of the left half.
b Mirror*
*
•
•
The camera focuses on the area in the center of the frame.
When Selective color or Cross process is
selected, use the multi selector HIto select
the desired color, and press the kbutton to
apply the color. To change the color
selection, press the kbutton again.
Save
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Smart Portrait Mode (Enhancing Human
Faces When Shooting)
You can take a picture with the glamour retouch
function to enhance human faces.
1
2
Press the multi selector K.
Apply an effect.
Slider
•
•
•
Use JKto select the desired effect.
Use HIto select the amount of effect.
You can simultaneously apply multiple
effects.
Skin softening
B Skin softening, l Foundation
makeup, Q Soft, G Vividness, o
Brightness (Exp. +/-)
•
•
Select f Exit to hide the slider.
After configuring the desired effects, press
the kbutton to apply them.
Effects
3
Frame the picture and press the shutter-release button.
B Notes About Smart Portrait Mode
• The amount of effect may differ between the image on the shooting screen and
the saved image.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Functions Available in Smart Portrait Mode
•
•
•
•
•
•
Using Smile Timer
When you press the multi selector Jto select
a Smile timer and press the kbutton, the
camera automatically releases the shutter
whenever a smiling face is detected.
•
Set the glamour retouch function before
Smile timer
•
When you press the shutter-release button to
take a picture, smile timer is terminated.
B Notes About Smile Timer
• Under some shooting conditions, the camera may be unable to detect faces or
• This function may not be available to use in combination with other functions
C When the Self-timer Lamp Flashes
When using smile timer, the self-timer lamp flashes when the camera detects a face
and flashes quickly immediately after the shutter is released.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Using Self-Collage
The camera can capture a series of 4 or 9 images
at intervals and save them as a one-frame image
(a collage image).
1
/
5
0004. JPG
15/11/2015 15:30
1
2
Press the multi selector Jto
select n Self-Collage, and press
the kbutton.
•
•
A confirmation dialog is displayed.
When you press the dbutton and select
Self-Collage before pressing J, you can
configure the settings for Number of
shots, Interval, and Shutter sound
Self-Collage
•
If you want to apply glamour retouch when
shooting, set the effect before selecting
Take a picture.
•
When you press the shutter-release button,
a countdown starts (about five seconds)
and the shutter is automatically released.
The camera automatically releases the
shutter for the remaining pictures. A
countdown starts about three seconds
before shooting.
The number of shots is indicated by Uin
the monitor. It is displayed in green during
shooting and it changes to white after shooting.
When the camera finishes taking the specified number of shots, the collage
image is saved.
Each captured image is saved as an individual image separate from the
collage image.
•
•
•
•
B Notes About Self-Collage
• If you press the shutter-release button before the camera takes the specified
number of shots, shooting is canceled and the collage image is not saved. The
pictures that were taken before shooting was canceled are saved as individual
images.
• This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Short Movie Show Mode (Combining
Movie Clips to Create Short Movies)
You can create a short movie (e1080/30p or
S1080/25p) that is up to 30 seconds long
by recording and automatically combining
multiple movie clips that are several seconds
long.
1
Press the d(menu) button and
configure the settings for
recording movies.
Number of shots: Set the number of movie
clips that the camera records and the
recording time for each movie clip. By
default, the camera records 15 movie clips
that are 2 seconds each to create a 30-
second short movie.
Number of shots
Special effects
Background music
End recording
•
•
•
•
Effects can be changed for each movie clip.
Background music: Select the background music. Move the zoom control
After the settings are complete, press the dbutton or shutter-release
button to exit the menu.
2
3
Press the b(emovie-record)
button to record a movie clip.
•
The camera stops recording the movie clip
when the time specified in step 1 elapses.
Movie clip recording can be paused
temporarily.
0
15
•
25m 0s
880
Check the recorded movie clip, or
delete it.
•
•
To check it, press the kbutton.
To delete it, press the lbutton. The last
recorded movie clip or all movie clips can
be deleted.
To continue recording movie clips, repeat
the operation in step 2.
12
15
Preview
24m36s
880
•
•
Number of movie
clips recorded
To change the effects, return to step 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
4
Save the short movie show.
•
The short movie show is saved when the camera finishes recording the
specified number of movie clips.
•
To save a short movie show before the camera finishes recording the
specified number of movie clips, press the dbutton on the shooting
screen while a movie clip is not being recorded, and then select End
recording.
•
Movie clips are deleted when a short movie show is saved.
Operations During Movie Clip Playback
To adjust the volume, move the zoom control
Playback controls are displayed in the monitor.
The operations described below can be
performed by using the multi selector JKto
select a control and then pressing the k
button.
Playback controls
Function
Rewind
Icon
A
B
Description
Hold down the kbutton to rewind the movie.
Advance
Hold down the kbutton to advance the movie.
Pause playback. The operations listed below can be
performed while paused.
Rewind the movie one frame. Hold down the
kbutton for continuous rewinding.
C
Pause
E
Advance the movie one frame. Hold down the
kbutton for continuous advancing.
D
F
Resume playback.
End
playback
G
Return to the shooting screen.
End
recording
Save the short movie show using the recorded movie
clips.
p
B Notes About Recording a Short Movie Show
• The camera cannot record movies if a memory card is not inserted.
• Do not exchange the memory card until a short movie show is saved.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
C Pausing Movie Recording
• A still image (l 4608×2592) can be captured if you press the shutter-release
button on the shooting screen while a movie is not being recorded.
• You can pause movie recording and play back images or enter other shooting
modes to take pictures. Movie recording resumes when you enter n(short movie
show) mode again.
Functions Available in Short Movie Show Mode
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Flash Mode
You can select a flash mode to match the shooting conditions.
1
2
Press the multi selector H(m).
Auto
Select the desired flash mode
•
If the setting is not applied by pressing the
kbutton within a few seconds, the
selection will be canceled.
C The Flash Lamp
• The status of the flash can be confirmed by
pressing the shutter-release button halfway.
- On: The flash fires when you press the
shutter-release button all the way down.
- Flashing: The flash is charging. The camera
cannot shoot images.
- Off: The flash does not fire when a picture is
taken.
• If the battery level is low, the monitor turns off while the flash is charging.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Available Flash Modes
Auto
U
The flash fires when necessary, such as in dim lighting.
•
The flash mode icon on the shooting screen is displayed only
immediately after the setting is made.
Auto with red-eye reduction
Reduce “red-eye” in portraits caused by the flash.
Off
V
W
The flash does not fire.
•
We recommend using a tripod to stabilize the camera when shooting
in dark surroundings.
Fill flash
X
The flash fires whenever a picture is taken. Use to “fill-in” (illuminate)
shadows and backlit subjects.
Slow sync
Y
Suited to evening and night portraits that include background scenery.
The flash fires when necessary to illuminate the main subject; slow
shutter speeds are used to capture background at night or under dim
lighting.
C The Flash Mode Setting
• The setting applied in A(auto) mode is saved in the camera’s memory even after
the camera is turned off.
C Red-eye Reduction
If the camera detects red eye while saving an image, the affected area is processed to
reduce red-eye before the image is saved.
Note the following when shooting:
• More time than usual is required to save images.
• Red-eye reduction may not produce the desired results in some situations.
• In rare cases, red-eye reduction may be applied unnecessarily to other areas of the
image. In these cases, select another flash mode and take the picture again.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Self-timer
The camera is equipped with a self-timer that releases the shutter 10 seconds
or 2 seconds after you press the shutter-release button.
stabilize the camera during shooting.
1
2
Press the multi selector J(n).
Select n10s or n2s, and press
the kbutton.
Self-timer
• n10s (10 seconds): Use on important
occasions, such as weddings.
• n2s (2 seconds): Use to prevent camera
shake.
•
If the setting is not applied by pressing the
kbutton within a few seconds, the
selection will be canceled.
•
•
When the shooting mode is Pet portrait scene mode, Y (pet portrait auto
When the shooting mode is smart portrait mode, a (smile timer) or n (self-
3
Frame the picture and press the shutter-release button
halfway.
•
Focus and exposure are set.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
4
Press the shutter-release
button the rest of the way
down.
9
•
Countdown starts. The self-timer
lamp flashes and then glows
steadily about one second before
the shutter is released.
1/250
F3.4
•
•
When the shutter is released, the
self-timer is set to k.
To stop the countdown, press
the shutter-release button again.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Macro Mode (Taking Close-up Pictures)
Use macro mode when taking close-up pictures.
1
2
Press the multi selector I(p).
Select o and press the k
button.
Macro mode
•
If the setting is not applied by pressing the
kbutton within a few seconds, the
selection will be canceled.
3
Move the zoom control to set the
zoom ratio to a position where F
and the zoom indicator are
displayed in green.
•
When the zoom ratio is set to a position where the zoom indicator is
displayed in green, the camera can focus on subjects as close as
approximately 10 cm (4 in.) from the lens.
When the zoom is at the position where G is displayed, the camera can
focus on subjects as close as approximately 1 cm (0.4 in.) from the lens.
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1
ft 8 in.).
C The Macro Mode Setting
• If the setting is applied in A(auto) mode, it will remain saved in the camera’s
memory even after the camera is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Creative Slider (Adjusting Brightness
(Exposure Compensation), Vividness, and
Hue)
When the shooting mode is set to A(auto) mode, use the creative slider to
adjust brightness (exposure compensation), vividness, and hue for capturing
images.
1
2
Press the multi selector K(o).
Select the item and make an
adjustment.
Slider
Brightness (Exp. +/-)
• JK: Select an item.
-
-
• HI: The slider moves. The effect can be adjusted while confirming the
results on the monitor.
•
To turn off the effects of the creative slider, select P and press the k
button.
Exit
3
When adjustment is complete,
select y and press the kbutton.
•
If the kbutton (except when P is
selected) or the shutter-release button is
pressed in step 2, the selected amount of
effect is applied. When the effect is applied,
the camera returns to the shooting screen.
C Creative Slider Settings
The settings for Brightness (Exp. +/-), Vividness and Hue are saved in the camera’s
memory even after the camera is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Brightness (Exposure Compensation)
Adjust the overall brightness of the image.
• To brighten the image, set a positive (+) value.
• To darken the image, set a negative (–) value.
Slider
Brightness (Exp. +/-)
Exposure
compensation
value
Histogram
C Using the Histogram
A histogram is a graph showing the distribution of tones in the image. Use as a guide
when using exposure compensation and shooting without the flash.
• The horizontal axis corresponds to pixel brightness, with dark tones to the left and
bright tones to the right. The vertical axis shows the number of pixels.
• Increasing exposure compensation shifts tone distribution to the right, and
decreasing it shifts tone distribution to the left.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Vividness (Saturation Adjustment)
Adjust the overall vividness of the image.
•
The overall image vividness increases as the
slider is moved up. The overall image
vividness decreases as the slider is moved
down.
Slider
Vividness
Hue (White Balance Adjustment)
Adjust the overall hue of the image.
•
The overall image becomes more reddish as
the slider is moved up. The overall image
becomes more bluish as the slider is moved
down.
Slider
Hue
B Notes About Hue Adjustment
This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Exposure Compensation (Adjusting
Brightness)
When the shooting mode is set to scene mode, special effects mode or short
movie show mode, you can adjust the brightness (exposure compensation).
1
2
Press the multi selector K(o).
Exposure compensation
Select a compensation value and
press the kbutton.
+
+
2.0
•
•
•
To brighten the image, set a positive (+)
value.
To darken the image, set a negative (–)
value.
The compensation value is applied, even
without pressing the kbutton.
0.3
-2.0
Histogram
C Exposure Compensation Value
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Default Settings (Flash, Self-timer, Etc.)
Default settings for each shooting mode are listed below.
Exposure
compensation
Flash
Self-timer
Macro
1
A(auto)
k
k
–
U
k
x(scene auto
selector)
2
3
0.0
U
k
4
4
4
X(night landscape)
W(backlighting)
y
k
k
0.0
0.0
W
k
k
5
X/W
4
4
b(portrait)
V
k
k
0.0
0.0
k
k
4
c(landscape)
W
N (time-lapse
movie)
6
4
4
k
0.0
W
k
4
4
4
4
4
4
4
4
4
d(sports)
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
W
k
k
k
k
k
k
k
k
4
S(night portrait)
f(party/indoor)
Z (beach)
k
k
k
k
k
k
k
k
V
7
V
U
U
z (snow)
4
h(sunset)
W
4
i(dusk/dawn)
k(close-up)
u (food)
W
4
W
o
4
4
W
o
4
4
4
4
4
m(fireworks show)
W
k
k
k
k
0.0
4
4
p(easy panorama) W
k
0.0
0.0
4
8
O (pet portrait)
W
Y
u(special
effects)
k
0.0
W
k
10
11
–
9
4
F(smart portrait)
k
U
k
k
4
n(short movie show)
k
0.0
W
Download from Www.Somanuals.com. All Manuals Search And Download.
50
1
2
The camera automatically selects the flash mode appropriate for the scene it has
selected. W(off) can be selected manually.
Cannot be changed. The camera enters macro mode when i is selected.
Cannot be changed.
3
4
5
Flash is fixed at X(fill flash) when HDR is set to Off, and is fixed at W(off) when
HDR is set to On.
6
7
8
Cannot be changed when Night sky or Star trails is used.
Slow sync with red-eye reduction flash mode may be used.
Self-timer cannot be used. Pet portrait auto release can be set to o or k
Cannot be used when Blink proof is set to On.
also used.
9
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Focusing
The focus area varies depending on the shooting mode.
Using Target Finding AF
the camera focuses in the manner described below when you press the
shutter-release button halfway.
•
The camera detects the main subject and
focuses on it. When the subject is in focus,
the focus area is displayed in green. If a
human face is detected, the camera
automatically sets focus priority on it.
1/250
F3.4
Focus areas
•
If no main subject is detected, the camera
automatically selects one or more of the 9
focus areas containing the subject closest to
the camera. When the subject is in focus, the
focus areas that are in focus are displayed in
green.
1/250
F3.4
Focus areas
B Notes About Target Finding AF
• Depending on shooting conditions, the subject that the camera determines to be
the main subject may vary.
• The main subject may not be detected when using certain White balance
settings.
• The camera may not detect the main subject appropriately in the following
situations:
- When the subject is very dark or bright
- When the main subject lacks clearly defined colors
- When the shot is framed so that the main subject is at the edge of the monitor
- When the main subject is composed of a repeating pattern
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Using Face Detection
In the following shooting modes, the camera
uses face detection to automatically focus on
human faces.
•
Portrait or Night portrait scene mode
25
m
0s
•
•
880
If the camera detects more than one face, a double border is displayed around
the face that the camera focuses on, and single borders are displayed around
the other faces.
If the shutter button is pressed halfway when no faces are detected:
•
•
•
In x(scene auto selector) mode, the focus area changes depending on the
scene.
In Portrait and Night portrait scene modes or in smart portrait mode, the
camera focuses in the center of the frame.
In A(auto) mode, the camera selects the focus area containing the subject
closest to the camera.
B Notes About Face Detection
• The camera’s ability to detect faces depends on a variety of factors, including the
direction in which the faces are looking.
• The camera cannot detect faces in the following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Using Skin Softening
When the shutter is released while using one of the shooting modes listed
below, the camera detects human faces and processes the image to soften
facial skin tones (up to 3 faces).
•
The skin softening level can be adjusted by the glamour retouch function.
-
•
Editing functions such as Skin softening can be applied to saved images by
B Notes About Skin Softening
• It may take more time than usual to save images after shooting.
• Under some shooting conditions, the desired skin softening results may not be
achieved, and skin softening may be applied to areas of the image where there are
no faces.
Subjects Not Suitable for Autofocus
The camera may not focus as expected in the following situations. In rare cases,
the subject may not be in focus despite the fact that the focus area or the focus
indicator is displayed in green:
•
Subject is very dark
•
Objects of sharply differing brightness are included in the scene (e.g. the sun
behind the subject makes that subject appear very dark)
No contrast between the subject and surroundings (e.g. a portrait subject
wearing a white shirt is standing in front of a white wall)
Several objects are at different distances from the camera (e.g. the subject is
inside a cage)
Subjects with repeating patterns (window blinds, buildings with multiple
rows of similarly shaped windows, etc.)
Subject is moving rapidly
•
•
•
•
In the situations noted above, try pressing the shutter-release button halfway
to refocus several times, or focus on another subject positioned at the same
distance from the camera as the actual desired subject, and use focus lock
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Focus Lock
Focus lock shooting is recommended when the camera does not activate the
focus area that contains the desired subject.
1
2
Position the subject in the
center of the frame and
press the shutter-release
button halfway.
•
The camera focuses on the
subject and the focus area is
displayed in green.
1/250
F3.4
•
Exposure is also locked.
3
4
Without lifting your finger,
recompose the picture.
•
Make sure to maintain the same distance
between the camera and the subject.
1/250
F3.4
Press the shutter-release button
the rest of the way down to take
the picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Functions That Cannot Be Used
Simultaneously When Shooting
Some functions cannot be used with other menu options.
Restricted function
Option
Description
When a setting other than
Single is selected, the flash
cannot be used.
Flash mode
When Blink proof is set to On,
the flash cannot be used.
When Subject tracking is
selected, the self-timer cannot be
used.
Self-timer
When Subject tracking is
selected, macro mode cannot be
used.
Macro mode
Image mode is set as follows
depending on the continuous
shooting setting:
•
•
•
Pre-shooting cache:
q1600×1200
Continuous H: 120 fps:
O 640×480
Continuous H: 60 fps: M
(image size: 1280 × 960 pixels)
Image mode
When the hue is adjusted using
the creative slider, the White
balance in the shooting menu
cannot be specified. To specify
White balance, select P in the
setting screen of the creative
slider and reset the settings of
brightness, vividness, and hue.
Hue of creative slider
White balance
Continuous
If the self-timer is used when Pre-
shooting cache is selected, the
setting is fixed at Single.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Restricted function
ISO sensitivity
Option
Description
When Pre-shooting cache,
Continuous H: 120 fps, or
Continuous H: 60 fps is
selected, ISO sensitivity is fixed
at Auto.
When a setting other than Auto
is selected for White balance in
Target finding AF mode, the
camera does not detect the main
subject.
AF area mode
When Blink proof is set to On,
Self-Collage
Blink proof
Self-Collage cannot be used.
When Self-Collage is set, Blink
proof cannot be used.
When Pre-shooting cache,
Continuous H: 120 fps, or
Continuous H: 60 fps is
selected, date and time cannot
be stamped on images.
Date stamp
When Subject tracking is
selected, digital zoom cannot be
used.
Digital zoom
When a setting other than
Single is selected, the shutter
sound is disabled.
Shutter sound
B Notes About Digital Zoom
• Depending on the shooting mode or the current settings, digital zoom may not be
• When digital zoom is in effect, the camera focuses in the center of the frame.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Playback Features
Playback Zoom
Moving the zoom control toward g(iplayback zoom) in full-frame playback
Displayed area guide
4
/
4
0004. JPG
15/11/2015 15:30
3.0
Full-frame Playback
Image is zoomed in.
•
You can change the magnification rate by moving the zoom control toward
f(h) or g(i).
•
•
To view a different area of the image, press the multi selector HIJK.
When a zoomed image is displayed, press the kbutton to return to full-
frame playback mode.
C Cropping Images
When a zoomed image is displayed, you can press the dbutton to crop the image
Download from Www.Somanuals.com. All Manuals Search And Download.
58
Thumbnail Playback/Calendar Display
Moving the zoom control toward f(hthumbnail playback) in full-frame
1
/
20
1
/
20
4
2015 11
Sun
M
on
Tue
W
ed
Thu
F
ri
Sat
1
2
3
4
5
6
7
8
15
22
29
9
16
23
30
10
17
24
11
18
25
12
19
26
13
20
27
14
21
28
0004. JPG
15/11/2015 15:30
Full-frame Playback
Thumbnail Playback
Calendar Display
•
•
You can change the number of thumbnails displayed by moving the zoom
control toward f(h) or g(i).
While using thumbnail playback mode, press the multi selector HIJKto
select an image and then press the kbutton to display that image in full-
frame playback mode.
•
While using calendar display mode, press HIJKto select a date and
then press the kbutton to display the images captured on that day.
B Notes About Calendar Display
Images captured when the camera’s date is not set are treated as images captured
on January 1, 2015.
Download from Www.Somanuals.com. All Manuals Search And Download.
59
List by Date Mode
Press the cbutton (playback mode) Mdbutton MN menu icon
MC List by date Mkbutton
Use the multi selector HIto select a date and
List by date
then press the kbutton to play back the
images captured on the selected date.
30/11/2015
25/11/2015
20/11/2015
15/11/2015
3
2
•
be used for the images in the selected
shooting date (except Copy).
The following operations are available while
the shooting date selection screen is
displayed.
11
4
•
- dbutton: The functions listed below are available.
•
•
*
Slide show
Protect*
The same setting can be applied to all images captured on the selected
date.
- lbutton: Deletes all images captured on the selected date.
B Notes About List by Date Mode
• Up to the most recent 29 dates can be selected. If images exist for more than 29
dates, all images saved earlier than the most recent 29 dates will be combined
under Others.
• The 9,000 most recent images can be displayed.
• Images captured when the camera’s date is not set are treated as images captured
on January 1, 2015.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
Viewing and Deleting Images Captured
Continuously (Sequence)
Viewing Images in a Sequence
Images captured continuously or with the self-collage function are saved as a
sequence.
The first image of a sequence is used as the key
1
/ 5
picture to represent the sequence when
displayed in full-frame playback mode or
thumbnail playback mode. For the self-collage
function, a collage image is used as the key
picture.
To display each image in the sequence
0004. JPG
15/11/2015 15:30
individually, press the kbutton.
After pressing the kbutton, the operations
1
/ 5
listed below are available.
•
To display the previous or next image, press
the multi selector JK.
•
To display images that are not included in the
sequence, press Hto return to the key
picture display.
Back
15/11/2015 15:30
•
To display images in a sequence as
thumbnails, or to play them back in a slide
show, set Sequence display options to Individual pictures in the
B Sequence Display Options
Images captured continuously with cameras other than this camera cannot be
displayed as a sequence.
C Playback Menu Options Available When Using Sequence
• When images in a sequence are displayed in full-frame playback mode, press the
• If you press the dbutton when a key picture is displayed, the following settings
can be applied to all images in the sequence:
- Mark for Wi-Fi upload, Protect, Copy
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Deleting Images in a Sequence
When the l(delete) button is pressed for images in a sequence, the images
that are deleted vary depending on how the sequences are displayed.
•
When the key picture is displayed:
-
Current image:
All images in the displayed sequence are
deleted.
-
Erase selected images: When a key picture is selected on the erase
in that sequence are deleted.
-
All images:
All images on the memory card or in the
internal memory are deleted.
•
When images in a sequence are displayed in full-frame playback mode:
-
-
Current image:
The image currently displayed is deleted.
Erase selected images: Images that are selected in the sequence
are deleted.
-
Entire sequence:
All images in the displayed sequence are
deleted.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Editing Images (Still Images)
Before Editing Images
You can easily edit images on this camera. Edited copies are saved as separate
files.
Edited copies are saved with the same shooting date and time as the original.
C Restrictions on Image Editing
• An image can be edited up to 10 times. Additionally, still images created by movie
editing can be edited up to 9 times.
• You may not be able to edit images of a certain size or with certain editing
functions.
Quick Effects: Changing Hue or Mood
Images can be processed with a variety of effects.
Select Painting, Photo illustration, Soft portrait, Portrait (color + B&W),
Fisheye, Cross screen or Miniature effect.
1
Display the image to which you
want to apply an effect in full-
frame playback mode and press
the kbutton.
0004. JPG
15/11/2015 15:30
2
Use the multi selector HIJKto
select the desired effect and press
the kbutton.
Quick effects
Painting
Photo
illustration
Soft portrait
•
to switch to full-frame playback or f(h)
to switch to thumbnail playback.
Portrait
Fisheye
Cross screen
Check
(color + B&W)
Cancel
•
To exit without saving the edited image,
press the dbutton.
3
Select Yes and press the kbutton.
•
An edited copy is created.
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Quick Retouch: Enhancing Contrast and Saturation
Press the cbutton (playback mode) Mselect an image Mdbutton
MQuick retouch Mkbutton
Use the multi selector HIto select
Quick retouch
the amount of effect applied and press
the kbutton.
•
The edited version is displayed on the right.
•
To exit without saving the copy, press J.
Normal
Amount
D-Lighting: Enhancing Brightness and Contrast
Press the cbutton (playback mode) Mselect an image Mdbutton
MD-Lighting Mkbutton
Use the multi selector HIto select
D-Lighting
OK and press the kbutton.
•
•
The edited version is displayed on the right.
To exit without saving the copy, select Cancel
and press the kbutton.
OK
Cancel
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Red-eye Correction: Correcting Red-eye When
Shooting with the Flash
Press the cbutton (playback mode) Mselect an image Mdbutton
MRed-eye correction Mkbutton
Preview the result and press the k
Red-eye correction
button.
•
To exit without saving the copy, press the multi
selector J.
Back
Save
B Notes About Red-eye Correction
• Red-eye correction can only be applied to images when red-eye is detected.
• Red-eye correction can be applied to pets (dogs or cats) even if their eyes are not
red.
• Red-eye correction may not produce the desired results in some images.
• In rare cases, red-eye correction may be applied unnecessarily to other areas of the
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Glamour Retouch: Enhancing Human Faces
Press the cbutton (playback mode) Mselect an image Mdbutton
MGlamour retouch Mkbutton
1
2
Use the multi selector HIJKto
select the face that you want to
retouch and press the kbutton.
Subject selection
•
When only one face is detected, proceed to
step 2.
Back
Use JKto select the effect, use
HIto select the effect level, and
press the kbutton.
Small face
3
2
1
•
You can simultaneously apply multiple
effects.
Adjust or check the settings for all effects
before pressing the kbutton.
F (Small face), B (Skin softening),
Back
l (Foundation makeup), m (Glare reduction), E (Hide eye bags), A (Big
eyes), G (Whiten eyes), n (Eye shadow), o (Mascara), H (Whiten teeth),
p (Lipstick), D (Redden cheeks)
•
Press the dbutton to return to the screen for selecting a person.
3
Preview the result and press the
kbutton.
Preview
•
To change the settings, press Jto return to
step 2.
•
To exit without saving the edited image,
press the dbutton.
Save
Download from Www.Somanuals.com. All Manuals Search And Download.
66
4
Select Yes and press the k
button.
Save OK?
•
An edited copy is created.
Yes
No
B Notes About Glamour Retouch
• One face at a time can be edited. To use the glamour retouch function for another
face, edit the edited image again.
• Depending on the direction in which faces are looking, or the brightness of faces,
the camera may be unable to accurately detect faces, or the glamour retouch
function may not perform as expected.
• If no faces are detected, a warning is displayed and the screen returns to the
playback menu.
• The glamour retouch function is available only for images captured at an ISO
sensitivity of 1600 or lower, and the image size of 640 × 480 or larger.
Small Picture: Reducing the Size of an Image
Press the cbutton (playback mode) Mselect an image Mdbutton
MSmall picture Mkbutton
1
2
Use the multi selector HIto
select the desired copy size and
press the kbutton.
Images captured at an image mode setting of
l 4608×2592 are saved at a size of 640 ×
360, and images captured at an image mode
setting of s 3456×3456 are saved at 480 ×
480. Press the kbutton to proceed to step 2.
Small picture
640×480
•
320×240
160×120
Select Yes and press the k
button.
Create small picture file?
•
An edited copy is created (compression
ratio of approximately 1:8).
Yes
No
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Crop: Creating a Cropped Copy
1
2
Adjust the image so that only the
portion that you want to keep is
displayed, and then press the d
(menu) button.
•
Move the zoom control toward g(i) or
f(h) to adjust the magnification rate.
Set a magnification rate at which u is
displayed.
3.0
•
Use the multi selector HIJKto scroll to the portion of the image that you
want to display.
Trim
3
4
Preview the image and press the
kbutton.
•
To change the portion that you want to
keep, press Jto return to step 2.
To exit without saving the cropped image,
press the dbutton.
•
Back
Save
Select Yes and press the k
button.
Save this image as
displayed?
•
An edited copy is created.
Yes
No
C Image Size
• The aspect ratio (horizontal to vertical) of a cropped image is the same as that of
the original image.
• When the image size of the cropped copy is 320 × 240 or smaller, the image is
displayed at a smaller size during playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
68
Recording and Playing Back
Movies
1
Display the shooting screen.
•
Check the remaining amount of movie
recording time.
25
m
0s
880
Remaining movie
recording time
2
Press the b(emovie-record)
button to start movie recording.
•
The camera focuses in the center of the
frame.
•
Press the multi selector Kto pause
recording, and press Kagain to resume
recording (except when an HS movie
option is selected in Movie options).
Recording automatically ends if it remains
paused for about five minutes.
14
m30s
•
You can capture a still image by pressing
the shutter-release button while recording
3
4
Press the b(e) button again to end recording.
10s
Select a movie in full-frame
playback mode and press the k
button to play it back.
•
An image with a movie options icon is a
movie.
0010. MOV
15/11/2015 15:30
Movie options
Download from Www.Somanuals.com. All Manuals Search And Download.
69
Area Captured in Movies
•
The area that is captured in a movie varies depending on the Movie
options or Movie VR settings in the movie menu.
Movie frame+auto info, you can confirm the area that will be captured in
a movie before you start recording.
•
Maximum Movie Recording Time
Individual movie files cannot exceed 4 GB in size or 29 minutes in length, even
when there is sufficient free space on the memory card for longer recording.
•
•
•
The remaining recording time for a single movie is displayed on the
shooting screen.
The actual remaining recording time may vary depending on the movie
content, subject movement, or type of memory card.
Memory cards with an SD Speed Class rating of 6 or faster are
unexpectedly when memory cards with a lower Speed Class rating are used.
When using the camera’s internal memory, saving movies may take some
time.
Depending on the file size of a movie, it may not be possible to save the
movie in the internal memory or copy it from a memory card to the internal
memory.
•
•
B Notes About Camera Temperature
• The camera may become hot when shooting movies for an extended period of
time or when the camera is used in a hot area.
• If the inside of the camera becomes extremely hot when recording movies, the
camera will automatically stop recording.
The amount of time remaining until the camera stops recording (B10s) is
displayed.
After the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has cooled.
Download from Www.Somanuals.com. All Manuals Search And Download.
70
Notes About Movie Recording
B Notes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing
the remaining recording time flashes while images or movies are being saved. Do
not open the battery-chamber/memory card slot cover or remove the
battery or memory card while an indicator is flashing. Doing this could result in
loss of data, or in damage to the camera or the memory card.
B Notes About Recorded Movies
• There may be some degradation in image quality when digital zoom is used.
• The sounds of zoom control operation, zoom, autofocus lens drive movement,
movie vibration reduction, and aperture operation when brightness changes may
be recorded.
• The following phenomena may be seen in the monitor while recording movies.
These phenomena are saved in the recorded movies.
- Banding may occur in images under fluorescent, mercury-vapor, or sodium-
vapor lighting.
- Subjects that move quickly from one side of the frame to the other, such as a
moving train or car, may appear skewed.
- The entire movie image may be skewed when the camera is panned.
- Lighting or other bright areas may leave residual images when the camera is
moved.
• Depending on the distance to the subject or the amount of zoom applied, colored
stripes may appear on subjects with repeating patterns (fabrics, lattice windows,
etc.) during movie recording and playback. This occurs when the pattern in the
subject and the layout of the image sensor interfere with each other; it is not a
malfunction.
B Notes About Vibration Reduction During Movie Recording
view (i.e., the area visible in the frame) becomes narrower during movie recording.
• When using a tripod to stabilize the camera during shooting, set Movie VR to Off
to prevent potential errors caused by this function.
B Notes About Autofocus for Movie Recording
1. Set Autofocus mode in the movie menu to Single AF (default setting) before
starting movie recording.
2. Frame another subject (positioned at the same distance from the camera as the
intended subject) in the center of the frame, press the b(e) button to start
recording, and modify the composition.
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Capturing Still Images While Recording
Movies
If the shutter-release button is pressed all the
way while recording a movie, one frame is saved
as a still image. Movie recording continues while
the still image is being saved.
•
While Q is displayed in the monitor, still
images can be captured. While z is
displayed, still images cannot be captured.
The size of the captured image varies
depending on the Movie options setting
14
m30s
•
B Notes About Capturing Still Images During Movie Recording
• Still images cannot be captured during a movie recording in the following
situations:
- When the remaining movie recording time is less than 5 seconds
- When Movie options is set to Z 1080/60i, U 1080/50i, g 480/30p,
W 480/25p, or HS movie
• The sound of pressing the shutter-release button may be recorded in the movie.
• If the camera moves when the shutter-release button is pressed, the image may be
blurred.
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Operations During Movie Playback
To adjust the volume, move the zoom control
Volume indicator
Playback controls are displayed in the monitor.
The operations described below can be
performed by using the multi selector JKto
select a control and then pressing the k
button.
When
paused
Function
Rewind
Icon
A
B
Description
Hold down the kbutton to rewind the movie.
Hold down the kbutton to advance the movie.
Advance
Pause playback. The operations listed below can be
performed while paused.
Rewind the movie one frame. Hold down the k
button for continuous rewinding.
C
Advance the movie one frame. Hold down the k
button for continuous advancing.
D
F
I
Pause
E
G
Resume playback.
Extract the desired portion of a movie and save it as a
separate file.
Extract a single frame of a movie and save it as a still
image.
H
End
Return to full-frame playback mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Editing Movies
When editing movies, use a sufficiently charged battery to prevent the camera
from turning off during editing. When the battery level indicator is B, movie
editing is not possible.
Extracting Only the Desired Portion of a Movie
The desired portion of a recorded movie can be saved as a separate file.
1
2
Play back a movie and pause at the start point of the
1m30s
Use the multi selector JKto
select I in the playback controls,
and then press the kbutton.
3
4
Use HIto select M (choose start
point) in the editing controls.
Choose start point
•
•
Use JKto move the start point.
To cancel editing, select O (return), and
press the kbutton.
Use HIto select N (choose end
point).
Choose end point
•
Use JKto move the end point.
•
To preview the specified portion, select G
and then press the kbutton. Press the k
button again to stop previewing.
Download from Www.Somanuals.com. All Manuals Search And Download.
74
5
Use HIto select m (save) and
press the kbutton.
Save
•
Follow the instructions on the screen to
save the movie.
B Notes About Movie Editing
• A movie that was created by editing cannot be trimmed again.
• The actual trimmed portion of a movie may differ slightly from the portion selected
using the start and end points.
• Movies cannot be trimmed so that they are less than two seconds long.
Saving a Frame from a Movie as a Still Image
The desired frame of a recorded movie can be extracted and saved as a still
image.
•
Pause a movie and display the frame to be
1m30s
•
Use the multi selector JKto select the H
control and press the kbutton.
•
•
Select Yes when a confirmation dialog is
displayed, and press the kbutton to save
the image.
The image quality of the saved still image is
normal (compression ratio of approximately
1:8). The image size is determined by the type
For example, a still image saved from a movie
recorded with e 1080/30p or S
1080/25p is n (1920 × 1080 pixels).
1m30s
Copy this frame as a still image?
Yes
No
B Notes About Saving Still Images
Frames of HS movies and movies recorded with Z 1080/60i, U 1080/50i,
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Using Menus
You can set the menus listed below by pressing the d(menu) button.
• A, x, y, X, W, u, F, n Shooting menu
Available by pressing the dbutton when the shooting screen is
displayed.
Allows you to change image size and quality, continuous shooting settings,
etc.
Menu icons and setting items vary depending on the shooting mode.
G Playback menu/C List by date menu
•
Available by pressing the dbutton when viewing images in full-frame
playback mode or thumbnail playback mode.
Allows you to edit images, play slide shows, etc.
• DMovie menu
Available by pressing the dbutton when the shooting screen is
displayed.
Allows you to change movie recording settings.
J Wi-Fi options menu
•
Allows you to configure Wi-Fi settings for connecting the camera and a
smart device.
• zSetup menu
Allows you to adjust basic camera functions such as date and time, display
language, etc.
1
2
Press the d(menu)
button.
•
The menu is displayed.
25
m
0s
880
Press the multi
selector J.
Shooting menu
Image mode
White balance
Continuous
•
The current menu icon is
displayed in yellow.
ISO sensitivity
AF area mode
Autofocus mode
Menu icons
Download from Www.Somanuals.com. All Manuals Search And Download.
76
3
4
Select a menu icon
and press the k
button.
Set up
Time zone and date
Monitor settings
Date stamp
Photo VR
•
The menu options
become selectable.
AF assist
Digital zoom
Select a menu option
and press the k
button.
Time zone and date
Monitor settings
Date stamp
Photo VR
•
Certain menu options
cannot be set depending
on the current shooting
mode or the state of the
camera.
AF assist
Digital zoom
5
Select a setting and
press the kbutton.
Date stamp
Date
•
The setting you selected is
applied.
Date and time
Off
•
When you are finished
using the menu, press the
dbutton.
•
When a menu is displayed,
you can switch to shooting mode by pressing the shutter-release button or
b(e) button.
Download from Www.Somanuals.com. All Manuals Search And Download.
77
The Shooting Menu (The Common
Shooting Options)
Image Mode (Image Size and Quality)
Enter shooting mode* Mdbutton MImage mode Mkbutton
*
This setting can also be changed in shooting modes other than short movie show
mode. The changed setting is also applied to other shooting modes (except
Time-lapse movie and Easy panorama scene modes).
Select the combination of image size and compression ratio to be used when
saving images.
The higher the image mode setting, the larger the size at which it can be
printed, and the lower the compression ratio, the higher the quality of the
images, but the number of images that can be saved is reduced.
Aspect ratio
(horizontal to
vertical)
Option*
Q 4608×3456P
Compression ratio
Approx. 1:4
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
Approx. 1:8
4:3
4:3
4:3
4:3
4:3
4:3
16:9
1:1
P 4608×3456 (default setting)
R 3264×2448
r 2272×1704
q 1600×1200
O 640×480
l 4608×2592
s 3456×3456
*
The numerical values indicate the number of pixels that are captured.
Example: P 4608×3456 = approx. 16 megapixels, 4608 × 3456 pixels
Download from Www.Somanuals.com. All Manuals Search And Download.
78
B Notes About Printing Images at 1:1 Aspect Ratio
Change the printer setting to “Border” when printing images at a 1:1 aspect ratio.
Some printers may not be able to print images at a 1:1 aspect ratio.
B Notes About Image Mode
This function may not be available to use in combination with other functions
C Number of Images That Can Be Saved
• The approximate number of images that can be saved can be checked in the
• Note that due to JPEG compression, the number of images that can be saved may
vary greatly depending on the image content, even when using memory cards
with the same capacity and the same image mode setting. In addition, the number
of images that can be saved may vary depending on the make of the memory card.
• If the number of exposures remaining is 10,000 or more, the number of exposures
remaining display shows “9999”.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
The Shooting Menu (for A(Auto) Mode)
•
Image mode.
White Balance (Adjusting Hue)
Rotate the mode dial to AMdbutton MAmenu icon MWhite
balance Mkbutton
Adjust white balance to suit the light source or weather conditions in order to
make the colors in images match what you see with your eyes.
Option
a Auto
(default setting)
Description
White balance is automatically adjusted.
Use when the desired result is not achieved with Auto,
b Preset manual
c Daylight
d Incandescent
e Fluorescent
f Cloudy
Use under direct sunlight.
Use under incandescent lighting.
Use under fluorescent lighting.
Use under overcast skies.
Use with the flash.
g Flash
B Notes About White Balance
• Set the flash to W(off) when white balance is set to any setting other than Auto
• This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Using Preset Manual
Use the procedure below to measure the white balance value under the
lighting used during shooting.
1
2
Place a white or gray reference object under the lighting
that will be used during shooting.
Use the multi selector HIto
select Preset manual in the
White balance menu, and press
the kbutton.
White balance
Auto
Preset manual
Daylight
Incandescent
Fluorescent
Cloudy
•
The camera zooms in to the position for
measuring white balance.
3
4
Select Measure.
Preset manual
•
To apply the last measured value, select
Cancel and press the kbutton.
Cancel
Measure
Frame the white or gray reference
object in the measuring window,
and press the kbutton to
measure the value.
Preset manual
•
The shutter is released and measurement is
complete (no image is saved).
Cancel
Measure
Measuring window
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting
using the flash, set White balance to Auto or Flash.
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Continuous Shooting
Rotate the mode dial to AMdbutton MAmenu icon M
Continuous Mkbutton
Option
U Single
(default setting)
Description
One image is captured each time the shutter-release
button is pressed.
While the shutter-release button is held all the way down,
images are captured continuously.
k Continuous H
•
The frame rate for continuous shooting is about 7.9 fps
and the maximum number of continuous shots is about
7 (when image mode is set to P 4608×3456).
While the shutter-release button is held all the way down,
images are captured continuously.
m Continuous L
•
The frame rate for continuous shooting is about 2 fps and
the maximum number of continuous shots is about 7
(when image mode is set to P 4608×3456).
When the shutter-release button is pressed halfway, pre-
shooting cache shooting begins. When the shutter-release
button is pressed the rest of the way down, the camera
saves the current image as well as the images captured
function helps you to avoid missing the shot.
q Pre-shooting
cache
•
The frame rate for continuous shooting is about 15 fps
and the maximum number of continuous shots is 25,
including a maximum of 4 frames captured in the pre-
shooting cache.
•
Image mode is fixed at q 1600×1200.
Each time the shutter-release button is pressed all the way,
images are captured at a high speed rate.
n Continuous H:
120 fps
•
The frame rate for continuous shooting is about 120 fps
and the maximum number of continuous shots is 50.
Image mode is fixed at O 640×480.
•
Each time the shutter-release button is pressed all the way,
images are captured at a high speed rate.
j Continuous H:
60 fps
•
The frame rate for continuous shooting is about 60 fps
and the maximum number of continuous shots is 25.
Image mode is fixed at M (image size: 1280 × 960
pixels).
•
Download from Www.Somanuals.com. All Manuals Search And Download.
82
B Notes About Continuous Shooting
• Focus, exposure, and white balance are fixed at the values determined with the
first image in each series.
• It may take some time to save the images after shooting.
• When ISO sensitivity increases, noise may appear in captured images.
• The frame rate for continuous shooting may vary depending on the current image
mode setting, the memory card used, or shooting condition.
• When using Pre-shooting cache, Continuous H: 120 fps, or Continuous H: 60
fps, banding or variance in brightness or hue may occur in images that were
captured under lighting that flickers at high speeds, such as fluorescent, mercury-
vapor, or sodium-vapor lighting.
• This function may not be available to use in combination with other functions
C Pre-shooting Cache
When the shutter-release button is pressed halfway or all the way down, images are
saved as described below.
Press down halfway
Press down all the way
Images saved before pressing all the way Images saved by pressing all
the way
• The pre-shooting cache icon (Q) on the shooting screen changes to green while
the shutter-release button is pressed halfway.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
ISO Sensitivity
Rotate the mode dial to AMdbutton MAmenu icon MISO
sensitivity Mkbutton
A higher ISO sensitivity allows darker subjects to be captured. Additionally,
even with subjects of similar brightness, pictures can be taken at faster shutter
speeds, and blurring caused by camera shake and subject movement can be
reduced.
•
When a higher ISO sensitivity is set, images may contain noise.
Option
a Auto
(default setting)
Description
Sensitivity is automatically selected from the range of
ISO 125 to 1600.
Select the range in which the camera automatically
adjusts ISO sensitivity, from ISO 125-400 or ISO 125-
800.
I Fixed range auto
125, 200, 400, 800, 1600,
3200, 6400
Sensitivity is locked at the specified value.
B Notes About ISO Sensitivity
This function may not be available to use in combination with other functions
C ISO Sensitivity Display on the Shooting Screen
•
•
When Auto is selected, E is displayed when the ISO sensitivity increases.
When Fixed range auto is selected, the maximum value for ISO sensitivity
is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
84
AF Area Mode
Rotate the mode dial to AMdbutton MAmenu icon MAF area
mode Mkbutton
Set how the camera selects the focus area for autofocus.
Option
Description
When the camera detects
a human face, it focuses
on that face.
more information.
25
m
0s
880
Focus area
aFace priority
When framing a
composition with no
human subjects or
detected faces, the
camera automatically
selects one or more of the
9 focus areas containing
the subject closest to the
camera when the shutter-
release button is pressed
halfway.
1/250
F3.4
Focus areas
Use the multi selector
HIJKto move the
focus area to where you
want to focus.
Scope of movable
focus area
•
To use the multi
selector to configure
the flash mode or other
settings, press the k
button. To return to
moving the focus area,
press the kbutton
again.
x Manual
Focus area
Download from Www.Somanuals.com. All Manuals Search And Download.
85
Option
Description
The camera focuses on
the subject in the center
of the frame.
y Center
25
m
0s
880
Focus area
Use this function to take
pictures of moving
subjects. Register the
subject on which the
camera focuses. The focus
area automatically moves
to track the subject. See
sSubject
tracking
Start
25
m
0s
880
information.
When the camera detects
the main subject, it
focuses on that subject.
information.
M Target finding
AF (default setting)
1/250
F3.4
Focus areas
B Notes About AF Area Mode
• When digital zoom is in effect, the camera focuses in the center of the frame
regardless of the AF area mode setting.
• This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Using Subject Tracking
Rotate the mode dial to AMdbutton MAmenu icon MAF area
mode Mkbutton MsSubject tracking Mkbutton Mdbutton
1
Register a subject.
•
•
•
Align the subject that you want to track
with the border in the center of the monitor
and press the kbutton.
When the subject is registered, a yellow
border (focus area) is displayed around it
and the camera begins tracking the subject.
If the subject cannot be registered, the
border is displayed in red. Change the
composition and try registering the subject
again.
Start
25
m
0s
880
•
•
To cancel subject registration, press the kbutton.
If the camera can no longer track the registered subject, the focus area
disappears. Register the subject again.
2
Press the shutter-release button
fully to take the picture.
•
If the shutter-release button is pressed
while the focus area is not displayed, the
camera focuses on the subject in the center
of the frame.
1/250
F3.4
B Notes About Subject Tracking
• If you perform operations such as zooming while the camera is tracking the
subject, the registration is canceled.
• Subject tracking may not be possible in certain shooting conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Autofocus Mode
Rotate the mode dial to AMdbutton MAmenu icon MAutofocus
mode Mkbutton
Set how the camera focuses when shooting still images.
Option
Description
The camera focuses only when the shutter-release
button is pressed halfway.
A Single AF
The camera continues focusing even when the
shutter-release button is not pressed halfway. The
sound of lens drive movement is heard while the
camera focuses.
B Full-time AF
Even when the shutter-release button is not pressed
halfway, the camera focuses automatically if the
composition of the framed image is significantly
changed.
a Pre-focus
(default setting)
C Autofocus Mode for Short Movie Show Mode or Movie Recording
Autofocus mode for short movie show mode or movie recording can be set with
Download from Www.Somanuals.com. All Manuals Search And Download.
88
The Smart Portrait Menu
•
Image mode.
Self-Collage
Rotate the mode dial to FMdbutton MFmenu icon M
Self-Collage Mkbutton
Option
Description
Set the number of shots that the camera
automatically captures (number of captured
images for an aggregated image).
Number of shots
•
4 (default setting) or 9 can be selected.
Set the interval time between each shot.
Interval
•
Short, Medium (default setting), or Long can
be selected.
Set whether to activate the shutter sound when
shooting with the self-collage function.
•
Standard, SLR, Magic (default setting), or Off
can be selected.
Shutter sound
•
The same setting that is specified for Shutter
sound in Sound settings in the setup menu is
not applied to this setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
89
Blink Proof
Rotate the mode dial to FMdbutton MFmenu icon MBlink proof
Mkbutton
Option
Description
The camera automatically
releases the shutter twice
with every shot and saves
one image in which the
subject’s eyes are open.
A blink was detected in the
picture just taken.
y On
•
If the camera saved an
image in which the
subject’s eyes may
have been closed, the
dialog shown on the right is displayed for a few seconds.
Off (default setting) Turns the blink proof off.
B Notes About Blink Proof
This function may not be available to use in combination with other functions
Download from Www.Somanuals.com. All Manuals Search And Download.
90
The Playback Menu
•
editing functions.
Mark for Wi-Fi Upload
Press the cbutton (playback mode) Mdbutton MMark for Wi-Fi
upload Mkbutton
Select still images in the camera that you want to transfer to a smart device in
advance before transferring them. Movies cannot be selected.
for Wi-Fi upload function.
upload settings that you made are canceled.
Download from Www.Somanuals.com. All Manuals Search And Download.
91
Slide Show
Press the cbutton (playback mode) Mdbutton MSlide show Mk
button
Play back images one by one in an automated “slide show.” When movie files
are played back in the slide show, only the first frame of each movie is
displayed.
1
2
Use the multi selector HIto
select Start and press the k
button.
Slide show
Start
•
The slide show begins.
Frame intvl
Loop
•
To change the interval between images,
select Frame intvl, press the kbutton,
and specify the desired interval time before
selecting Start.
Pause
•
•
To repeat the slide show automatically, select Loop and press the kbutton
before selecting Start.
The maximum playback time is up to about 30 minutes even if Loop is
enabled.
End or restart the slide show.
•
The screen shown on the right is displayed
after the slide show ends or is paused. To
exit the show, select G and then press the
kbutton. To resume the slide show, select
F and then press the kbutton.
Operations During Playback
•
Use the multi selector JKto display the previous/next image. Press and
hold to rewind/fast forward.
•
Press the kbutton to pause or end the slide show.
Download from Www.Somanuals.com. All Manuals Search And Download.
92
Protect
Press the cbutton (playback mode) Mdbutton MProtect Mk
button
The camera protects selected images from accidental deletion.
Select images to protect or cancel protection from the image selection screen
Note that formatting the memory card or the camera’s internal memory
Rotate Image
Press the cbutton (playback mode) Mdbutton MRotate image M
kbutton
Specify the orientation in which saved images are displayed during playback.
Still images can be rotated 90 degrees clockwise or 90 degrees
counterclockwise.
image screen is displayed, press the multi selector JKto rotate the image 90
degrees.
Rotate image
Rotate image
Rotate image
Back
Rotate
Back
Rotate
Back
Rotate
Rotate 90 degrees
counterclockwise
Rotate 90 degrees
clockwise
Press the kbutton to finalize display orientation, and save orientation
information with the image.
Download from Www.Somanuals.com. All Manuals Search And Download.
93
Copy (Copy Between the Memory Card and
Internal Memory)
Press the cbutton (playback mode) Mdbutton MCopy Mk
button
Images can be copied between a memory card and the internal memory.
•
When a memory card that contains no images is inserted and the camera is
switched to playback mode, Memory contains no images. is displayed. In
that case, press the dbutton to select Copy.
1
Use the multi selector HIto
select a destination option to
Copy
which images are copied and
press the kbutton.
Camera to card
Card to camera
2
Select a copy option and press the
kbutton.
Camera to card
•
When you choose Selected images, use the
image selection screen to specify images
Selected images
All images
B Notes About Copying Images
• Only files in formats that this camera can record can be copied.
• Operation is not guaranteed with images captured with another make of camera
or that have been modified on a computer.
C Copying Images in a Sequence
• If you select a key picture of a sequence in Selected images, all images in the
sequence are copied.
• If you press the dbutton while images in a sequence are displayed, only the
Card to camera copy option is available. All images in the sequence are copied if
you select Current sequence.
Download from Www.Somanuals.com. All Manuals Search And Download.
94
Sequence Display Options
Press the cbutton (playback mode) Mdbutton MSequence display
options Mkbutton
Option
Description
Displays each image in a sequence individually.
F is displayed on the playback screen.
Q Individual pictures
C Key picture only
(default setting)
Displays only the key picture for images in a
sequence.
The setting is applied to all sequences and saved in the camera’s memory even
if the camera is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
95
The Image Selection Screen
When an image selection screen such as the
one shown on the right is displayed while
operating the camera, follow the procedures
described below to select the images.
Protect
Back
1
2
3
Use the multi selector JKto
select an image.
Protect
•
to switch to full-frame playback or f(h)
to switch to thumbnail playback.
•
Only one image can be selected for Rotate
image. Proceed to step 3.
Back
Use HIto select or deselect.
Protect
•
When an image is selected, an icon is
displayed below the image. Repeat steps 1
and 2 to select additional images.
Back
Press the kbutton to apply image selection.
•
When a confirmation dialog is displayed, follow the on-screen instructions to
operate.
Download from Www.Somanuals.com. All Manuals Search And Download.
96
The Movie Menu
Movie Options
Enter shooting mode Mdbutton MDmenu icon MMovie options
Mkbutton
Select the desired movie option to record. Select normal speed movie options
motion. The movie options that can be selected vary depending on the Frame
•
Memory cards with an SD Speed Class rating of 6 or faster are recommended
Normal Speed Movie Options
Option
(Image size/Frame
rate , File format)
Aspect ratio (horizontal to
vertical)
Image size
1
e 1080/30p
S 1080/25p
(default setting)
1920 × 1080
16:9
1, 2
1, 2
Z 1080/60i
U 1080/50i
1920 × 1080
1280 × 720
640 × 480
16:9
16:9
4:3
f 720/30p
V 720/25p
g 480/30p
W 480/25p
1
2
Interlaced format uses Fields per second.
The setting is not available when using certain effects in special effects mode or
glamour retouch function.
Download from Www.Somanuals.com. All Manuals Search And Download.
97
HS Movie Options
Recorded movies are played back in fast or slow motion.
Image size
Aspect ratio
Option
Description
(horizontal to vertical)
1/4-speed slow motion movies
2
h
a
640 × 480
4:3
•
Max. recording time : 10
seconds (playback time: 40
seconds)
1
HS 480/4×
2× speed fast motion movies
2
j
Y
1920 × 1080
16:9
•
Max. recording time : 2
minutes (playback time: 1
minute)
1
HS 1080/0.5×
1
2
The setting is not available when using certain effects in special effects mode or
glamour retouch function.
While recording movies, the camera can be switched between normal speed
movie recording and slow motion or fast motion movie recording.
The maximum recording time shown here refers only to the portion of the movie
that is recorded in slow motion or fast motion.
B Notes About HS Movie
• Sound is not recorded.
• Zoom position and focus are locked when movie recording starts.
Download from Www.Somanuals.com. All Manuals Search And Download.
98
C Playing Back in Slow Motion and Fast Motion
When recording at normal speed:
Recording
10 s
time
Playback
10 s
time
When recording at h HS 480/4×, or a HS 480/4×:
Movies are recorded at 4× normal speed.
They are played back in slow motion at 4× slower speed.
Recording
10 s
time
Playback
time
40 s
Slow motion playback
When recording at j HS 1080/0.5×, or Y HS 1080/0.5×:
Movies are recorded at 1/2 normal speed.
They are played back in fast motion at 2× faster speed.
Recording
10 s
time
Playback
5 s
time
Fast motion playback
Download from Www.Somanuals.com. All Manuals Search And Download.
99
Recording Movies in Slow Motion and Fast Motion (HS
Movie)
Enter shooting mode Mdbutton MDmenu icon MMovie options
Mkbutton
Movies recorded using HS movie can be played back in slow motion at 1/4 of
the normal playback speed, or in fast motion at twice the normal playback
speed.
Movie options
1
Use the multi selector HIto
and press the kbutton.
1080/30p
1080/60i
720/30p
480/30p
•
After applying the option, press the d
button to return to the shooting screen.
HS 480/4×
HS 1080/0.5×
2
Press the b(emovie-record)
button to start recording.
•
The camera switches between normal
speed movie recording and HS movie
recording each time the kbutton is
pressed.
•
•
The movie options icon changes when
switching between HS movie recording
and normal speed movie recording.
When the maximum recording time for HS
5s
speed movie recording.
3
Press the b(e) button to end recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
100
Autofocus Mode
Enter shooting mode Mdbutton MDmenu icon MAutofocus mode
Mkbutton
Set how the camera focuses in short movie show mode or when recording
movies.
Option
Description
Focus is locked when movie recording starts.
Select this option when the distance between the
camera and subject will remain fairly consistent
during movie recording.
A Single AF
(default setting)
The camera focuses continuously during movie
recording.
Select this option when the distance between the
camera and subject will change significantly during
recording. The sound of the camera focusing may be
heard in the recorded movie. Use of Single AF is
recommended to prevent the sound of the camera
focusing from interfering with recording.
B Full-time AF
•
When an HS movie option is selected in Movie options, the setting is fixed
at Single AF.
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Movie VR
Enter shooting mode Mdbutton MDmenu icon MMovie VR M
kbutton
Select the vibration reduction setting used in short movie show mode or when
recording movies.
Select Off when using a tripod to stabilize the camera during shooting.
Option
Description
Performs optical compensation for camera shake
using lens shift VR and simultaneously performs
electronic VR using image processing. The angle of
view (i.e., the area visible in the frame) becomes
narrower.
V On (hybrid)
(default setting)
Performs compensation for camera shake using lens
shift VR.
g On
Off
Compensation is not performed.
•
When an HS movie option is selected in Movie options, the setting is fixed
at Off.
B Notes About Movie VR
• The effects of camera shake may not be completely eliminated in some situations.
• In special effects mode, only lens shift VR is used to compensate for camera shake
when Movie options is set to Z 1080/60i or U 1080/50i, even if Movie
VR is set to On (hybrid).
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Wind Noise Reduction
Enter shooting mode Mdbutton MDmenu icon MWind noise
reduction Mkbutton
Option
Description
Reduces the sound that is produced when wind
passes over the microphone during movie recording.
Other sounds may become difficult to hear during
playback.
Y On
Off (default setting)
Wind noise reduction is disabled.
•
When an HS movie option is selected in Movie options, the setting is fixed
at Off.
Frame Rate
Enter shooting mode Mdbutton MDmenu icon MFrame rate M
kbutton
Select the frame rate (fields per second for the interlaced format) used in short
movie show mode or when recording movies. When the frame rate setting is
Option
30 fps (30p/60i)
25 fps (25p/50i)
Description
Suited for playback on a TV using the NTSC standard.
Suited for playback on a TV using the PAL standard.
Download from Www.Somanuals.com. All Manuals Search And Download.
103
The Wi-Fi Options Menu
Press the dbutton MJ menu icon Mkbutton
Configure the Wi-Fi (wireless LAN) settings to connect the camera and a smart
device.
Option
Description
Connect to Select when wirelessly connecting the camera and a smart device.
smart
device
more information.
Select when wirelessly connecting the camera and a smart device.
Upload
from
camera
•
The images to transfer can be selected on the image selection
SSID and password of the camera are displayed on the screen
after images are selected.
Select to terminate the wireless connection between the camera
and a smart device. See “To Terminate the Wi-Fi Connection”
Disable
Wi-Fi
SSID: Change the SSID. The SSID configured here is displayed on
the smart device. Set a 1- to 24-character alphanumeric SSID.
Auth./encryp.: Select whether or not to encrypt the
communications between the camera and the connected smart
device.
Communications are not encrypted when Open (default setting) is
selected.
•
Options
When WPA2-PSK-AES is set, the message for entering a
password is displayed when the camera is connected to smart
Password: Set the password. Set an 8- to 16-character
alphanumeric password.
Channel: Select the channel used for wireless connections.
Current
settings
Display the current settings.
Restore
default
settings
Restore the Wi-Fi settings to their default values. The wireless
connection is terminated if this option is performed while Wi-Fi is
connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
104
Operating the Text Input Keyboard
•
Use the multi selector HIJKto select
alphanumeric characters. Press the kbutton
to enter the selected character in the text
field and move the cursor to the next space.
To move the cursor in the text field, select N
or O on the keyboard, and press the k
button.
Text field
SSID
•
•
•
To delete one character, press the lbutton.
To apply the setting, select P on the
keyboard and press the kbutton.
Back
Delete
Keyboard
Download from Www.Somanuals.com. All Manuals Search And Download.
105
The Setup Menu
Time Zone and Date
Press the dbutton Mzmenu icon MTime zone and date Mk
button
Set the camera clock.
Option
Description
•
•
•
Select a field: Press the
multi selector JK.
Edit the date and time:
Press HI.
Apply the setting: Select
the minute field setting
and press the kbutton.
Date and time
D
M
Y
h
m
Date and time
15 11 2015 15 30
Edit
Select Year/Month/Day, Month/Day/Year, or Day/Month/
Date format
Time zone
Year.
Set time zone and daylight saving time.
•
When Travel destination (x) is set after having set the
home time zone (w), the time difference between the
travel destination and the home time zone is automatically
calculated, and the date and time are saved for the selected
region.
Setting the Time Zone
1
Use the multi selector HIto
select Time zone and press the k
button.
Time zone and date
Date and time
Date format
Time zone
London, Casablanca
15/11/2015 15:30
Download from Www.Somanuals.com. All Manuals Search And Download.
106
2
3
4
Select w Home time zone or x
Travel destination and press the
kbutton.
Time zone
Home time zone
Travel destination
•
The date and time displayed in the monitor
changes depending on whether the home
time zone or travel destination is selected.
London, Casablanca
15/11/2015 15:30
Press K.
Time zone
Home time zone
Travel destination
London, Casablanca
15/11/2015 15:30
Use JKto select the time zone.
New York, Toronto, Lima
•
Press Hto enable daylight saving time
function, and W is displayed. Press Ito
disable the daylight saving time function.
Press the kbutton to apply the time zone.
If the correct time is not displayed for the
home or travel destination time zone
setting, set the appropriate time in Date
and time.
10:30
–5:00
•
•
Back
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Monitor Settings
Press the dbutton Mzmenu icon MMonitor settings Mkbutton
Option
Photo info
Description
Set whether or not to display information in the monitor.
Set whether or not to display the captured image immediately
after shooting.
Image review
Brightness
•
Default setting: On
Adjust the brightness.
•
Default setting: 3
Photo Info
Shooting mode
Playback mode
4
/
4
Show info
Auto info
25
m
0s
0004. JPG
15/11/2015 15:30
880
The same information as shown in Show info is displayed,
and it is hidden as shown in Hide info if no operations are
(default setting) performed for a few seconds. The information is displayed
again when an operation is performed.
Hide info
Download from Www.Somanuals.com. All Manuals Search And Download.
108
Shooting mode
Playback mode
4 / 4
25
m
0s
0004. JPG
15/11/2015 15:30
880
Framing
In addition to the information Same as Auto info.
shown in Auto info, a
grid+auto info
framing grid is displayed to
help frame pictures.
The framing grid is not
displayed while recording
movies.
4 / 4
25
m
0s
0004. JPG
880
15/11/2015 15:30
In addition to the information Same as Auto info.
shown in Auto info, a frame
is displayed before movie
recording begins that
Movie
frame+auto info
represents the area that will
be captured when recording
movies.
The movie frame is not
displayed while recording
movies.
Download from Www.Somanuals.com. All Manuals Search And Download.
109
Date Stamp
Press the dbutton Mzmenu icon MDate stamp Mkbutton
The shooting date and time can be stamped on
images when shooting.
15.11.2015
Option
f Date
Description
Date is stamped on images.
S Date and time
Date and time are stamped on images.
Off (default setting)
Date and time are not stamped on images.
B Notes About Date Stamp
• Stamped dates form a permanent part of image data and cannot be deleted. The
date and time cannot be stamped on images after they have been captured.
• The date and time cannot be stamped in the following situations:
- When using Night portrait (when Hand-held is selected), Night landscape
(when Hand-held is selected), Backlighting (when HDR is set), or Easy
panorama scene mode
Continuous H: 120 fps, or Continuous H: 60 fps
- When shooting movies
- When saving still images during moving recording
• The stamped date and time may be difficult to read when using a small image size.
C Printing a Shooting Date on Images Without a Date Stamp
imprint the shooting date on the images when they are printed.
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Photo VR
Press the dbutton Mzmenu icon MPhoto VR Mkbutton
Select the vibration reduction setting used when shooting still images.
Select Off when using a tripod to stabilize the camera during shooting.
Option
g On (default setting)
Off
Description
Compensation for camera shake is performed using
lens shift VR.
Compensation is not performed.
B Notes About Photo VR
• After turning on the camera or after switching from playback mode to shooting
mode, wait for the shooting mode screen to be displayed completely before
taking pictures.
• Images in the camera monitor may be displayed blurry immediately after shooting.
• The effects of camera shake may not be completely eliminated in some situations.
AF Assist
Press the dbutton Mzmenu icon MAF assist Mkbutton
Option
Description
The AF-assist illuminator automatically lights up when
you press the shutter-release button under dim
lighting. The illuminator has a range of about 2.0 m (6
ft 6 in.) at the maximum wide-angle position and
about 2.0 m (6 ft 6 in.) at the maximum telephoto
position.
a Auto
(default setting)
•
Note that for some shooting modes or focus areas,
the AF-assist illuminator may not light.
Off
The AF-assist illuminator does not light.
Download from Www.Somanuals.com. All Manuals Search And Download.
111
Digital Zoom
Press the dbutton Mzmenu icon MDigital zoom Mkbutton
Option
On (default setting)
Off
Description
Digital zoom is enabled.
Digital zoom is disabled.
B Notes About Digital Zoom
• Digital zoom cannot be used in the following shooting modes:
-
Portrait, Night portrait, Night landscape, Backlighting (when HDR is set),
Easy panorama, or Pet portrait scene mode
- Smart portrait mode
• Digital zoom cannot be used in other shooting modes when using certain settings
Sound Settings
Press the dbutton Mzmenu icon MSound settings Mkbutton
Option
Description
When On (default setting) is selected, the camera
produces one beep when operations are performed,
two beeps when focus is acquired on the subject, and
three beeps when an error occurs. The welcome
screen sound is also produced.
Button sound
•
Sounds are disabled when using Pet portrait
scene mode.
When On (default setting) is selected, the shutter
sound is produced when the shutter is released.
Shutter sound
•
The shutter sound is not produced when using
continuous shooting mode, when recording
movies, or when using Pet portrait scene mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Auto Off
Press the dbutton Mzmenu icon MAuto off Mkbutton
Set the amount of time that elapses before the camera enters standby mode
You can select 30 s, 1 min (default setting), 5 min, or 30 min.
C Setting the Auto Off Function
The time that passes before the camera enters standby mode is fixed in the following
situations:
• When a menu is displayed: 3 minutes (when auto off is set to 30 s or 1 min)
• When shooting using Pet portrait auto release: 5 minutes (when auto off is set
to 30 s or 1 min)
• When shooting using Smile timer: 5 minutes (when auto off is set to 30 s or
1 min)
• When the AC Adapter is connected: 30 minutes
• When an HDMI cable is connected: 30 minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
113
Format Card/Format Memory
Press the dbutton Mzmenu icon MFormat card/Format memory M
kbutton
Use this option to format a memory card or the internal memory.
Formatting the memory cards or internal memory permanently deletes
all data. Data that has been deleted cannot be recovered. Make sure to
save important images to a computer before formatting.
Formatting a Memory Card
•
•
Insert a memory card into the camera.
Select Format card in the setup menu and then press the kbutton.
Formatting the Internal Memory
•
•
Remove the memory card from the camera.
Select Format memory in the setup menu and then press the kbutton.
To start formatting, select Format on the screen that is displayed and press the
kbutton.
•
Do not turn the camera off or open the battery-chamber/memory card slot
cover during formatting.
Language
Press the dbutton Mzmenu icon MLanguage Mkbutton
Select a language for display of camera menus and messages.
Download from Www.Somanuals.com. All Manuals Search And Download.
114
Charge by Computer
Press the dbutton Mzmenu icon MCharge by computer Mk
button
Option
a Auto
Description
When the camera is connected to a computer that is
is automatically charged using power supplied by the
computer.
(default setting)
The battery inserted into the camera is not charged
when the camera is connected to a computer.
Off
B Notes About Charging with a Computer
• When connected to a computer, the camera turns on and starts charging. If the
camera is turned off, charging stops.
• About 3 hours are required to charge a fully exhausted battery. Charging time
increases when images are transferred while the battery is charging.
• The camera turns off automatically if there is no communication with the
computer for 30 minutes after the battery has finished charging.
B When the Charge Lamp Quickly Flashes Green
Charging cannot be performed, possibly due to one of the reasons described below.
• The ambient temperature is not suited to charging. Charge the battery indoors
with an ambient temperature of 5°C to 35°C (41°F to 95°F).
• The USB cable is not connected correctly, or the battery is faulty. Make sure the USB
cable is connected correctly or replace the battery if necessary.
• The computer is in sleep mode and is not supplying power. Wake up the
computer.
• The battery cannot be charged because the computer cannot supply power to the
camera due to the computer’s settings or its specifications.
Download from Www.Somanuals.com. All Manuals Search And Download.
115
Reset All
Press the dbutton Mzmenu icon MReset all Mkbutton
When Reset is selected, the camera’s settings are restored to their default
values.
•
•
Some settings, such as Time zone and date or Language, are not reset.
The wireless connection is terminated if this option is performed while Wi-Fi
is connected.
C Resetting File Numbering
To reset file numbering to “0001”, delete all images saved on the memory card or in
Conformity Marking
Press the dbutton Mzmenu icon MConformity marking Mk
button
View some of the conformity markings that the camera complies with.
Firmware Version
Press the dbutton Mzmenu icon MFirmware version Mkbutton
View the current camera firmware version.
•
The firmware version cannot be displayed while Wi-Fi is connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
116
Using the Wi-Fi (Wireless LAN)
Function
You can perform the following functions if you install the dedicated software
“Wireless Mobile Utility” on your smart device that runs on Android OS or iOS,
and connect it to the camera.
Take Photos
You can capture still images using the two methods described below.
•
Release the shutter on the camera and save the captured images to a smart
device.
•
Use a smart device to remotely release the camera shutter and save images
to the smart device.
View Photos
Images that are saved in the camera’s memory card can be transferred and
viewed on your smart device. You can also preselect the images in the camera
that you want to transfer to your smart device.
B Notes About Security Settings
No security settings such as password are configured for the camera at the time of
purchase. We strongly recommend performing the required security settings before
the security settings.
Installing the Software on the Smart Device
1
Use your smart device to connect to the Google Play Store,
App Store or other online apps marketplace and search for
“Wireless Mobile Utility.”
•
Check the user’s manual provided with your smart device for further details.
2
Check the description and other information and install the
software.
C User’s Manual for Wireless Mobile Utility
Download the user’s manual from the website below.
• Android OS: http://nikonimglib.com/ManDL/WMAU/
• iOS: http://nikonimglib.com/ManDL/WMAU-ios/
To establish a connection with the camera, press the Z(Wi-Fi) button on the camera,
and turn on the Wi-Fi function of the smart device, and then start the “Wireless Mobile
Utility” while Negotiating... Please wait. is displayed on the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
117
Connecting the Smart Device to the
Camera
1
Press the Z(Wi-Fi) button on the
camera.
•
•
The screen shown on the right is displayed.
If no connection confirmation is received
from the smart device within three minutes,
the message No access. is displayed and
the camera returns to the Wi-Fi options
screen.
Connect to smart device
SSID:
XXXXXXXXXXXXXXXXXX
XXXXXX
Password:
XXXXXXXXXXXXXXXX
•
You can also select Connect to smart
device in the Wi-Fi options menu to
display the screen shown on the right.
Cancel
2
3
Set the Wi-Fi setting on the smart device to On.
•
•
Check the user’s manual provided with your smart device for further details.
After the network names (SSIDs) that can be used for the smart device are
displayed, select the SSID displayed on the camera.
•
When Auth./encryp. is set to WPA2-PSK-AES in the Wi-Fi options menu,
the message for entering a password is displayed.
Enter the password that is displayed on the camera.
Start the “Wireless Mobile Utility” installed on the smart
device, while Negotiating... Please wait. is displayed on
the camera.
•
•
The screen for selecting “Take photos” or “View photos” is displayed.
When the message “Cannot connect to camera.” is displayed, return to
step 1 and retry the procedure.
•
C Touching an NFC-compatible Smart Device to the Camera for a
Wi-Fi Connection
When you use a smart device that is compatible
with near field communication (NFC) functions and
runs on Android OS, you can establish a Wi-Fi
connection and start the “Wireless Mobile Utility” by
touching the NFC antenna on the smart device to
the Y(N-Mark) on the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
118
To Terminate the Wi-Fi Connection
Perform one of the operations described below.
•
Turn off the camera.
•
Select Disable Wi-Fi in the Wi-Fi options menu on the camera (except
when the camera is operated by remote control).
Set the Wi-Fi setting on the smart device to Off.
•
B Notes About Wi-Fi Connection
• Wi-Fi connection operations are disabled in the following situations:
- When the camera is connected to a TV, computer, or printer
- While recording movies
- While the camera is processing data such as saving images or recording movies
- When the camera is connected to a smart device
• Select Disable Wi-Fi in areas where the use of radio waves is prohibited.
• When Wi-Fi is connected, Auto off is disabled.
• When Wi-Fi is connected, the battery drains faster than normal.
• The Wi-Fi connection is terminated in the following situations:
- When the battery level is low
- When starting movie recording in short movie show mode
C Security Settings
If no security settings (encryption and password) are configured for the camera’s
Wi-Fi function, unauthorized third parties may access the network and cause harm.
We strongly recommend performing the required security settings before using the
Wi-Fi function.
Download from Www.Somanuals.com. All Manuals Search And Download.
119
Preselecting Images in the Camera That
You Want to Transfer to a Smart Device
You can preselect images in the camera that you want to transfer to a smart
device. Movies cannot be preselected for transfer.
1
Select images to transfer.
You can preselect the images to transfer to a smart device in the following
menus:
•
•
When using Upload from camera, the SSID and password of the camera are
displayed after images are selected.
2
•
Tapping “View photos” in the “Wireless Mobile Utility” displays the
confirmation screen to transfer the specified images to the smart device.
B Preselecting Images to Transfer During Playback
While the camera is in playback mode, press the Zbutton or use the NFC function
to establish a Wi-Fi connection, and preselect the displayed images that you want to
transfer.
• You can preselect one image in full-frame playback mode. You can preselect all
images in the sequence when the key picture is displayed for images in a
sequence.
• You can preselect one image specified in thumbnail playback mode. You can
preselect all images in the sequence when the key picture is displayed for images
in a sequence.
• You can preselect all the images captured on the selected date in calendar display
playback mode.
This operation is not available when you use Connect to smart device in the Wi-Fi
options menu to establish the Wi-Fi connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
120
Connecting the Camera to a TV,
Printer, or Computer
You can enhance your enjoyment of images and movies by connecting the
camera to a TV, printer, or computer.
Micro-USB connector
HDMI micro connector
(Type D)
Open the connector
cover.
Insert the plug straight.
•
•
•
Before connecting the camera to an external device, make sure the
remaining battery level is sufficient and turn the camera off. Before
disconnecting, make sure to turn the camera off.
If the AC Adapter EH-62G (available separately) is used, this camera can be
powered from an electrical outlet. Do not use any other make or model of
AC adapter as it may cause the camera to heat up or malfunction.
For information about the connection methods and subsequent operations,
refer to the documentation included with the device in addition to this
document.
Download from Www.Somanuals.com. All Manuals Search And Download.
121
Viewing images on a TV
Images and movies captured with the camera can be viewed
on a TV.
Connection method: Connect a commercially available HDMI
cable to the TV’s HDMI input jack.
Printing images without using a computer
If you connect the camera to a PictBridge-compatible printer,
you can print images without using a computer.
Connection method: Connect the camera directly to the
printer’s USB port with the USB cable.
Viewing and organizing images on a computer
You can transfer images to a computer to perform simple
retouching and manage image data.
Connection method: Connect the camera to the computer’s
USB port with the USB cable.
•
Before connecting to a computer, install ViewNX 2 on the
•
If any USB devices that draw the power from the computer
are connected, disconnect them from the computer before
you connect the camera to it. Connecting the camera and
other USB-powered devices to the same computer
simultaneously may cause a camera malfunction or
excessive power supply from the computer, which could
damage the camera or memory card.
Download from Www.Somanuals.com. All Manuals Search And Download.
122
Connecting the Camera to a TV (Playback
on a TV)
1
Turn off the camera and connect it to the TV.
•
Make sure that the plugs are properly oriented. Do not insert or remove the
plugs at an angle when connecting or disconnecting them.
HDMI micro connector (Type D)
to HDMI jack
2
3
Set the TV’s input to external input.
•
See the documentation provided with your TV for details.
Hold down the c(playback)
button to turn on the camera.
•
Images are displayed on the TV.
•
The camera monitor does not turn on.
Download from Www.Somanuals.com. All Manuals Search And Download.
123
Connecting the Camera to a Printer (Direct
Print)
Users of PictBridge-compatible printers can connect the camera directly to the
printer and print images without using a computer.
Connecting the Camera to a Printer
1
2
Turn on the printer.
Turn off the camera and connect it to the printer using the
USB cable.
•
Make sure that the plugs are properly oriented. Do not insert or remove the
plugs at an angle when connecting or disconnecting them.
3
The camera is automatically turned on.
•
The PictBridge startup screen ( ) is displayed in the camera monitor,
1
followed by the Print selection screen ( ).
2
Print selection
15/11/2015
1
2
32
Download from Www.Somanuals.com. All Manuals Search And Download.
124
B If the PictBridge Startup Screen Is Not Displayed
print images with direct connection of the camera to some printers. If the PictBridge
startup screen is not displayed after the camera is turned on, turn the camera off and
disconnect the USB cable. Set Charge by computer to Off and reconnect the
camera to the printer.
Printing Images One at a Time
1
2
3
Use the multi selector JKto
select the desired image and press
the kbutton.
Print selection
15/11/2015
32
•
Move the zoom control toward f(h) to
switch to thumbnail playback or g(i) to
switch to full-frame playback.
Use HIto select Copies and
press the kbutton.
PictBridge
1
prints
•
Use HIto set the desired number of
copies (up to 9) and press the kbutton.
Start print
Copies
Paper size
Select Paper size and press the k
button.
PictBridge
4
prints
•
•
•
Select the desired paper size and press the
kbutton.
Start print
Copies
To print with the paper size setting
configured on the printer, select Default.
The paper size options available on the
camera vary depending on the printer that
you use.
Paper size
4
Select Start print and press the k
PictBridge
4
button.
prints
•
Printing starts.
Start print
Copies
Paper size
Download from Www.Somanuals.com. All Manuals Search And Download.
125
Printing Multiple Images
1
When the Print selection screen
is displayed, press the d(menu)
button.
Print selection
15/11/2015
32
2
Use the multi selector HIto
select Paper size and press the k
button.
Print menu
Print selection
Print all images
Paper size
•
•
•
•
Select the desired paper size and press the
kbutton.
To print with the paper size setting
configured on the printer, select Default.
The paper size options available on the
camera vary depending on the printer that you use.
To exit the print menu, press the dbutton.
3
Select Print selection, or Print all
images, and press the kbutton.
Print menu
Print selection
Print all images
Paper size
Download from Www.Somanuals.com. All Manuals Search And Download.
126
Print selection
Select images (up to 99) and the number
of copies (up to 9) of each.
Print selection
•
Use the multi selector JKto select
images, and use HIto specify the
number of copies to be printed.
•
Images selected for printing are
indicated by M and the number of
copies to be printed. To cancel the print
selection, set the number of copies to 0.
Back
•
•
Move the zoom control toward g(i) to switch to full-frame playback or
f(h) to switch to thumbnail playback.
Press the kbutton when setting is complete. When the screen for
confirming the number of print copies is displayed, select Start print
and press the kbutton to start printing.
Print all images
One copy each of all images saved in the internal memory, or on the
memory card, is printed.
•
When the screen for confirming the number of print copies is displayed,
select Start print and press the kbutton to start printing.
Download from Www.Somanuals.com. All Manuals Search And Download.
127
Using ViewNX 2 (Transferring Images to a
Computer)
Installing ViewNX 2
ViewNX 2 is free software that enables you to transfer images and movies to
your computer so that you can view, edit, or share them. To install ViewNX 2,
download the ViewNX 2 installer from the website below and follow the on-
screen installation instructions.
http://nikonimglib.com/nvnx/
For system requirements and other information, see the Nikon website for your
region.
Transferring Images to a Computer
1
Prepare a memory card that contains images.
You can use any of the methods below to transfer images from the memory
card to a computer.
•
SD memory card slot/card reader: Insert the memory card into the card
slot of your computer or the card reader (commercially available) that is
connected to the computer.
•
Direct USB connection: Turn the camera off and ensure that the memory
card is inserted in the camera. Connect the camera to the computer using
the USB cable.
The camera automatically turns on.
To transfer images that are saved in the camera’s internal memory, remove
the memory card from the camera before connecting it to the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
128
If a message is displayed prompting you to choose a program, select
Nikon Transfer 2.
•
When using Windows 7
If the dialog shown at right is
displayed, follow the steps
below to select Nikon Transfer 2.
1 Under Import pictures
and videos, click Change
program. A program
selection dialog will be
displayed; select Import
File using Nikon Transfer 2 and click OK.
2 Double-click Import File.
If the memory card contains a large number of images, it may take a while for
Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.
B Notes About Connecting the USB Cable
Operation is not guaranteed if the camera is connected to the computer via a USB
hub.
2
After Nikon Transfer 2 starts, click Start Transfer.
Start Transfer
Image transfer begins. When image transfer is complete, ViewNX 2 starts and
the transferred images are displayed.
Consult online help for more information on using ViewNX 2.
•
•
3
Terminate the connection.
•
If you are using a card reader or card slot, choose the appropriate option in
the computer operating system to eject the removable disk corresponding
to the memory card and then remove the memory card from the card reader
or card slot.
•
If the camera is connected to the computer, turn the camera off and
disconnect the USB cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
129
Technical Notes
Caring for the Product .................................................................................131
The Camera..............................................................................................131
The Battery...............................................................................................132
Memory Cards.........................................................................................134
Cleaning and Storage ..................................................................................135
Cleaning....................................................................................................135
Storage......................................................................................................135
Error Messages ...............................................................................................136
Troubleshooting ............................................................................................140
File Names........................................................................................................147
Optional Accessories....................................................................................148
Specifications..................................................................................................149
Index...................................................................................................................155
Download from Www.Somanuals.com. All Manuals Search And Download.
130
Caring for the Product
Observe the precautions described below in addition to the warnings in “For
The Camera
Do Not Apply Strong Impact to the Camera
The product may malfunction if subjected to strong shock or vibration. In addition,
do not touch or apply force to the lens or lens cover.
Keep Dry
The device will be damaged if immersed in water or subjected to high humidity.
Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building
on a cold day, can cause condensation to form inside the device. To prevent
condensation, place the device in a carrying case or a plastic bag before exposing it
to sudden changes in temperature.
Keep Away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields. Doing so could result in loss of data or
camera malfunction.
Do Not Point the Lens at Strong Light Sources for Extended Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods
when using or storing the camera. Intense light may cause the image sensor to
deteriorate or produce a white blur effect in photographs.
Turn the Product Off Before Removing or Disconnecting the Power
Source or Memory Card
Do not remove the battery while the product is on, or while images are being saved
or deleted. Forcibly cutting power in these circumstances could result in loss of data
or in damage to product memory or internal circuitry.
Download from Www.Somanuals.com. All Manuals Search And Download.
131
Notes About the Monitor
• Monitors and electronic viewfinders are constructed with extremely high precision;
at least 99.99% of pixels are effective, with no more than 0.01% being missing or
defective. Hence while these displays may contain pixels that are always lit (white,
red, blue, or green) or always off (black), this is not a malfunction and has no effect
on images recorded with the device.
• Images in the monitor may be difficult to see under bright lighting.
• Do not apply pressure to the monitor, as this could cause damage or malfunction.
Should the monitor break, care should be taken to avoid injury caused by broken
glass and to prevent the liquid crystal from the display touching the skin or
entering the eyes or mouth.
The Battery
Precautions for Use
• Note that the battery may become hot after use.
• Do not use the battery at ambient temperatures below 0°C (32°F) or above 40°C
(104°F) as this could cause damage or malfunction.
• If you notice any abnormalities such as excessive heat, smoke, or an unusual smell
coming from the battery, immediately discontinue use and consult your retailer or
Nikon-authorized service representative.
• After removing the battery from the camera or optional battery charger, put the
battery in a plastic bag, etc. in order to insulate it.
Charging the Battery
Check the battery level before using the camera and replace or charge the battery if
necessary.
• Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to
95°F) before use.
• A high battery temperature may prevent the battery from charging properly or
completely, and may reduce battery performance. Note that the battery may
become hot after use; wait for the battery to cool before charging.
When charging the battery inserted into this camera using the Charging AC
Adapter or a computer, the battery is not charged at battery temperatures below
0°C (32°F) or above 50°C (122°F).
• Do not continue charging once the battery is fully charged as this will result in
reduced battery performance.
• The battery temperature may increase during charging. However, this is not a
malfunction.
Carrying Spare Batteries
Whenever possible, carry fully charged spare batteries when taking pictures on
important occasions.
Download from Www.Somanuals.com. All Manuals Search And Download.
132
Using the Battery When Cold
On cold days, the capacity of batteries tends to decrease. If an exhausted battery is
used at a low temperature, the camera may not turn on. Keep spare batteries in a
warm place and exchange as necessary. Once warmed, a cold battery may recover
some of its charge.
Battery Terminals
Dirt on the battery terminals may prevent the camera from functioning. Should the
battery terminals become dirty, wipe them off with a clean, dry cloth before use.
Charging an Exhausted Battery
Turning the camera on or off while an exhausted battery is inserted in the camera
may result in reduced battery life. Charge the exhausted battery before use.
Storing the Battery
• Always remove the battery from the camera or optional battery charger when it is
not being used. Minute amounts of current are drawn from the battery while it is in
the camera, even when not in use. This may result in excessive battery drain and
complete loss of function.
• Recharge the battery at least once every six months and completely exhaust it
before returning it to storage.
• Put the battery in a plastic bag, etc. in order to insulate it and store it in a cool place.
The battery should be stored in a dry location with an ambient temperature of 15°C
to 25°C (59°F to 77°F). Do not store the battery in hot or extremely cold locations.
Battery Life
A marked drop in the time a fully charged battery retains its charge, when used at
room temperature, indicates that the battery needs to be replaced. Purchase a new
battery.
Recycling Used Batteries
Replace the battery when it no longer holds a charge. Used batteries are a valuable
resource. Please recycle used batteries in accordance with local regulations.
The Charging AC Adapter
• The Charging AC Adapter EH-71P/EH-71PCH is for use only with compatible
devices. Do not use with another make or model of device.
• Do not use any USB cable other than the UC-E21. Using a USB cable other than the
UC-E21 could result in overheating, fire or electric shock.
• Do not, under any circumstances, use another make or model of AC adapter other
than Charging AC Adapter EH-71P/EH-71PCH, and do not use a commercially
available USB-AC adapter or a battery charger for a mobile phone. Failure to
observe this precaution could result in overheating or in damage to the camera.
• The EH-71P/EH-71PCH is compatible with AC 100–240 V, 50/60 Hz electrical
outlets. When using in other countries, use a plug adapter (commercially available)
as necessary. For more information about plug adapters, consult your travel
agency.
Download from Www.Somanuals.com. All Manuals Search And Download.
133
Memory Cards
Precautions for Use
recommended memory cards.
• Be sure to follow the precautions described in the documentation included with
the memory card.
• Do not put labels or stickers on memory cards.
Formatting
• Do not format the memory card using a computer.
• The first time you insert a memory card that has been used in another device into
this camera, be sure to format it with this camera. We recommend formatting new
memory cards with this camera before using them with this camera.
• Note that formatting a memory card permanently deletes all images and
other data on the memory card. Be sure to make copies of any images you wish
to keep before formatting the memory card.
• If the message Card is not formatted. Format card? is displayed when the
camera is turned on, the memory card must be formatted. If there is data that you
do not want to delete, select No. Copy the necessary data to a computer, etc. If you
want to format the memory card, select Yes. The confirmation dialog will be
displayed. To start formatting, press the kbutton.
• Do not perform the following during formatting, while data is being written to or
deleted from the memory card, or during data transfer to a computer. Failure to
observe this precaution could result in the loss of data or in damage to the camera
or memory card:
- Open the battery-chamber/memory card slot cover to remove/insert the battery
or memory card.
- Turn off the camera.
- Disconnect the AC adapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
134
Cleaning and Storage
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Avoid touching glass parts with your fingers. Remove dust or lint with
a blower (typically a small device with a rubber bulb attached to one
end that is pumped to produce a stream of air out the other end). To
remove fingerprints or other stains that cannot be removed with a
blower, wipe the lens with a soft cloth, using a spiral motion that
Lens
starts at the center of the lens and working toward the edges. If this
fails, clean the lens using a cloth lightly dampened with commercial
lens cleaner.
Remove dust or lint with a blower. To remove fingerprints and other
stains, clean the monitor with a soft, dry cloth, being careful not to
apply pressure.
Monitor
Body
•
•
Use a blower to remove dust, dirt, or sand, then wipe gently with a
soft, dry cloth.
After using the camera at the beach or other sandy or dusty
environment, wipe off any sand, dust, or salt with a dry cloth lightly
dampened with fresh water and dry thoroughly.
Note that foreign matter inside the camera could cause
damage not covered by the warranty.
Storage
Remove the battery if the camera will not be used for an extended period. To
prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the
camera away again. Do not store the camera in any of the following locations:
•
•
•
Places that are poorly ventilated or subject to humidity of over 60%
Exposed to temperatures above 50°C (122°F) or below –10°C (14°F)
Next to equipment that produces strong electromagnetic fields, such as
televisions or radios
Download from Www.Somanuals.com. All Manuals Search And Download.
135
Error Messages
Refer to the table below if an error message is displayed.
Display
Cause/Solution
A
Battery temperature is
elevated. The camera will
turn off.
The camera turns off automatically. Wait
until the camera or battery temperature
has cooled before resuming use.
–
–
The camera will turn off
to prevent overheating.
The write-protect switch is in the “lock”
position. Slide the write-protect switch to
the “write” position.
Memory card is write
protected.
This card cannot be used. An error occurred while accessing the
memory card.
•
•
•
Use an approved memory card.
Check that the terminals are clean.
Confirm that the memory card is
correctly inserted.
This card cannot be read.
The memory card has not been
formatted for use in the camera.
Formatting deletes all data saved on the
memory card. If you need to keep copies
of any images, make sure to select No
and save the copies to a computer or
other medium before formatting the
memory card. Select Yes and press the
kbutton to format the memory card.
Card is not formatted.
Format card?
Delete images or insert a new memory
card.
Out of memory.
An error occurred while saving the image.
Insert a new memory card or format the
memory card or internal memory.
The camera has run out of file numbers.
Image cannot be saved. Insert a new memory card or format the
memory card or internal memory.
There is insufficient space to save the
copy.
Delete images from the destination.
Image cannot be
Check that the images can be edited.
modified.
Download from Www.Somanuals.com. All Manuals Search And Download.
136
Display
Cause/Solution
A
A time-out error occurred while saving
the movie on the memory card.
Select a memory card with a faster write
speed.
Cannot record movie.
The camera turned off while recording
time-lapse movie.
Save previously recorded
data as a time-lapse
movie?
•
Select Yes to create a time-lapse
movie with the previously captured
images.
–
•
Select No to delete the incomplete
data.
There are no images in the internal
memory or on the memory card.
•
Remove the memory card to play back
images in the internal memory.
Memory contains no
images.
•
To copy the images saved in the
camera’s internal memory to the
memory card, press the dbutton to
select Copy in the playback menu.
File contains no image
data.
The file was not created or edited with
this camera.
The file cannot be viewed on this camera.
View the file using a computer or the
device used to create or edit this file.
–
This file cannot be played
back.
There are no images available for a slide
show, etc.
All images are hidden.
This image cannot be
deleted.
The image is protected.
Disable protection.
The camera could not receive the signal
from the smart device. Establish the
wireless connection again.
•
•
Press the Zbutton.
Touch an NFC-compatible smart
device to the camera.
No access.
•
Select Connect to smart device in
the Wi-Fi options menu.
The camera failed to establish the
connection while receiving the signals
from the smart device. Set a different
channel in Channel under Options in
the Wi-Fi options menu, and establish the
wireless connection.
Could not connect.
Download from Www.Somanuals.com. All Manuals Search And Download.
137
Display
Cause/Solution
A
The Wi-Fi connection is terminated in the
following situations:
•
•
•
When the signal strength is insufficient
When the battery level is low
When a cable or memory card was
removed and inserted
Wi-Fi connection
terminated.
Use a sufficiently charged battery,
disconnect the TV, computer and printer,
and then establish the wireless
connection again.
Lens error. Try again after If the error persists, contact your retailer
turning the camera off
and on.
or Nikon-authorized service
representative.
–
An error occurred while communicating
with the printer.
Turn the camera off and reconnect the
USB cable.
Communications error
System error
An error occurred in the camera’s internal
circuitry.
Turn the camera off, remove and reinsert
the battery, and turn the camera on. If the
error persists, contact your retailer or
Nikon-authorized service representative.
Download from Www.Somanuals.com. All Manuals Search And Download.
138
Display
Cause/Solution
A
After solving the problem, select Resume
and press the kbutton to resume
printing.*
Printer error: check
printer status.
–
–
–
–
–
–
Load the specified size of paper, select
Resume, and press the kbutton to
resume printing.*
Printer error: check
paper.
Remove the jammed paper, select
Resume, and press the kbutton to
resume printing.*
Printer error: paper jam.
Load the specified size of paper, select
Resume, and press the kbutton to
resume printing.*
Printer error: out of
paper.
There is a problem with the printer’s ink.
Check the ink, select Resume, and press
the kbutton to resume printing.*
Printer error: check ink.
Printer error: out of ink.
Replace the ink cartridge, select Resume,
and press the kbutton to resume
printing.*
There is a problem with the image file to
be printed.
Select Cancel and press the kbutton to
cancel printing.
Printer error: file corrupt.
–
*
See the documentation provided with your printer for further guidance and
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
139
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service
representative.
Power, Display, Settings Issues
Problem
Cause/Solution
Wait for recording to end.
If the problem persists, turn the camera off.
If the camera does not turn off, remove and
reinsert the battery or batteries or, if you are
using an AC adapter, disconnect and reconnect
the AC adapter.
Note that although any data currently being
recorded will be lost, data that have already been
recorded will not be affected by removing or
disconnecting the power source.
A
•
•
The camera is on
but does not
respond.
–
The camera
cannot be turned The battery is exhausted.
on.
•
•
•
(auto off function).
low temperatures.
The camera turns
off without
warning.
The inside of the camera has become hot. Leave
the camera off until the inside of the camera has
cooled, and then try turning it on again.
–
•
•
The camera is off.
(auto off function).
•
The flash lamp flashes while the flash is charging.
Wait until charging is complete.
The camera is connected to a TV or computer.
The camera and smart device are connected
using a Wi-Fi connection and the camera is being
operated by remote control.
–
The monitor is
blank.
•
•
–
–
The camera may become hot when used for an
extended period of time to shoot movies or send
images, or when used in a hot environment; this is
not a malfunction.
The camera
becomes hot.
–
Download from Www.Somanuals.com. All Manuals Search And Download.
140
Problem
Cause/Solution
Confirm all connections.
When connected to a computer, the camera may
not charge for any of the reasons described
below.
A
•
•
-
-
-
Off is selected for Charge by computer in
–
the setup menu.
Battery charging stops if the camera is turned
off.
The battery
display language and date and time have not
been set, or the date and time were reset after
the camera’s clock battery was exhausted. Use
the Charging AC Adapter to charge the
battery.
inserted in the
camera cannot be
charged.
-
-
Battery charging may stop when the computer
enters sleep mode.
Depending on the computer specifications,
settings, and status, battery charging may not
be possible.
–
–
The monitor is
hard to read.
•
•
Adjust the monitor brightness.
The monitor is dirty. Clean the monitor.
O flashes on the
screen.
•
If the camera clock has not been set, O flashes
on the shooting screen, and images and movies
saved before the clock is set are dated “00/00/
0000 00:00” and “01/01/2015 00:00” respectively.
Set the correct time and date for Time zone and
date in the setup menu.
The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time
of the camera clock with that of a more accurate
timepiece, and reset as required.
Date and time of
recording are not
correct.
•
No indicators
displayed in
monitor.
Hide info is selected for Photo info in Monitor
settings in the setup menu.
Date stamp not Time zone and date has not been set in the setup
available.
menu.
•
•
•
The current shooting mode does not support
Date stamp.
A function that restricts the date stamp is
enabled.
The date cannot be stamped on movies.
Date not stamped
on images even
when Date
stamp is enabled.
–
Download from Www.Somanuals.com. All Manuals Search And Download.
141
Problem
Cause/Solution
A
Screen for setting
time zone and
date is displayed
when the camera
is turned on.
The clock battery is exhausted; all settings were
restored to their default values.
The camera
settings reset.
When some setting is selected in the Autofocus
mode or while in some shooting modes, the
camera may produce an audible focusing sound.
The camera
makes sound.
•
•
Unable to select a
menu.
options.
Some menus are not available when Wi-Fi is
connected. Terminate the Wi-Fi connection.
Shooting Issues
Problem
Cause/Solution
A
Cannot switch to
shooting mode.
Disconnect the HDMI cable or USB cable.
•
cbutton, shutter-release button, or b(e)
button.
Cannot take
pictures or record
movies.
•
•
When menus are displayed, press the d
button.
The flash is charging while the flash lamp is
flashing.
•
•
The battery is exhausted.
auto selector mode, Close-up scene mode, or
macro mode.
The camera
cannot focus.
•
•
•
The subject is hard to focus on.
Set AF assist in the setup menu to Auto.
Turn the camera off and then on again.
–
•
•
•
Use the flash.
Increase the ISO sensitivity value.
Enable Photo VR when shooting still images.
Enable Movie VR when recording movies.
Use a tripod to stabilize the camera (using the
self-timer at the same time is more effective).
102,
Images are
blurred.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
142
Problem
Cause/Solution
A
Bright specks
appear in images The flash is reflecting off particles in the air. Set the
captured with
flash.
flash mode setting to W(off).
•
•
•
The flash mode is set to W(off).
A function that restricts the flash is enabled.
Flash does not
fire.
•
•
Digital zoom is set to Off in the setup menu.
Digital zoom cannot be used with certain
shooting modes or when using certain settings in
other functions.
Digital zoom
cannot be used.
Image mode not
available.
A function that restricts Image mode is enabled.
Off is selected for Shutter sound in Sound
settings in the setup menu. No sound is produced
with some shooting modes and settings, even
when On is selected.
No sound when
the shutter is
released.
Off is selected for AF assist in the setup menu. AF-
assist illuminator may not light depending on the
position of the focus area or the current shooting
mode, even when Auto is selected.
AF-assist
illuminator does
not light.
Images appear
smeared.
The lens is dirty. Clean the lens.
Colors are
unnatural.
White balance or hue is not adjusted properly.
The subject is dark and the shutter speed is too
slow, or ISO sensitivity is too high. Noise can be
reduced by:
Randomly spaced
bright pixels
(“noise”) appear in
image.
•
Using the flash
Specifying a lower ISO sensitivity setting
•
•
•
•
•
•
•
The flash mode is set to W(off).
The flash window is blocked.
The subject is beyond the range of the flash.
Adjust exposure compensation.
Increase ISO sensitivity.
Images are too
dark
(underexposed).
mode or set the flash mode setting to X(fill flash).
Download from Www.Somanuals.com. All Manuals Search And Download.
143
Problem
Cause/Solution
A
Images are too
bright
Adjust exposure compensation.
(overexposed).
Unexpected
Use any scene mode other than Night portrait,
and change the flash mode to any setting other
than V(auto with red-eye reduction) and try
taking the picture again.
results when flash
set to V(auto
with red-eye
reduction).
•
•
In some shooting conditions, facial skin tones
may not be softened.
Skin tones are not
softened.
the Skin softening effect in Glamour retouch
in the playback menu.
It may take more time to save images in the
following situations:
When the noise reduction function is in
operation, such as when shooting in a dark
environment
•
–
•
•
When the flash mode is set to V(auto with
red-eye reduction)
When capturing images in the following scene
modes
Saving images
takes time.
- Hand-held in Night landscape
- HDR set to On in Backlighting
- Hand-held in Night portrait
- Easy panorama
•
•
shooting
When using continuous shooting mode
A ring-shaped
belt or rainbow-
colored stripe
appears in the
monitor or
When shooting with backlighting or when a very
strong light source (such as sunlight) is in the frame,
a ring-shaped belt or rainbow-colored stripe
(ghosting) may occur. Change the position of the
light source, or frame the picture so that the light
source does not enter the frame, and try again.
–
images.
Download from Www.Somanuals.com. All Manuals Search And Download.
144
Playback Issues
Problem
Cause/Solution
A
•
This camera may not be able to play back images
saved with another make or model of digital
camera.
File cannot be
•
–
–
This camera cannot play back movies recorded
with another make or model of digital camera.
This camera may not be able to play back data
edited on a computer.
played back.
•
•
•
Playback zoom cannot be used with movies.
This camera may not be able to zoom in on
images captured with another make or model of
digital camera.
Cannot zoom in
on image.
•
•
•
•
already been edited may not be edited again.
There is not enough free space on the memory
card or in the internal memory.
–
–
–
Cannot edit
images.
This camera is unable to edit images captured
with other cameras.
Editing functions used for images are not
available for movies.
Cannot rotate
image.
This camera cannot rotate images captured with
another make or model of digital camera.
–
–
•
A computer or printer is connected to the
camera.
Images are not
displayed on TV.
•
•
The memory card contains no images.
Remove the memory card to play back images in
the internal memory.
–
•
•
•
The camera is off.
The battery is exhausted.
The USB cable is not correctly connected.
–
121,
–
Nikon Transfer 2
does not start
when the camera
is connected to a
computer.
•
•
The camera is not recognized by the computer.
The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
–
Download from Www.Somanuals.com. All Manuals Search And Download.
145
Problem
Cause/Solution
A
The PictBridge
startup screen is
not displayed
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed and
it may be impossible to print images when Auto is
when the camera selected for Charge by computer in the setup
is connected to a menu. Set Charge by computer to Off and
printer.
reconnect the camera to the printer.
Images to be
printed are not
displayed.
•
•
The memory card contains no images.
Remove the memory card to print images in the
internal memory.
–
The camera cannot be used to select the paper size
in the following situations, even when printing from
a PictBridge-compatible printer. Use the printer to
select the paper size.
Cannot select
paper size with
the camera.
–
•
The printer does not support the paper sizes
specified by the camera.
•
The printer automatically selects the paper size.
Download from Www.Somanuals.com. All Manuals Search And Download.
146
File Names
Images or movies are assigned file names as follows.
File name: DSCN0001.JPG
(1)
(2) (3)
Not shown on the screen of the camera.
•
DSCN: Original still images, movies, still images created by
the movie editing function
•
•
•
SSCN: Small picture copies
RSCN: Cropped copies
FSCN: Images created by an image editing function other
than crop and small picture, movies created by the movie
editing function
(1) Identifier
Assigned in ascending order, starting with “0001” and ending
with “9999.”
(2) File number
(3) Extension
Indicates file format.
•
•
.JPG: Still images
.MOV: Movies
Download from Www.Somanuals.com. All Manuals Search And Download.
147
Optional Accessories
Battery Charger MH-66
Battery
Charger
It takes about 1 hour and 50 minutes to charge a fully exhausted
battery.
AC Adapter EH-62G
(connect as shown)
AC
Adapter
Make sure that the power connector cable is fully inserted in the
power connector slot before inserting the AC adapter into the battery
chamber. In addition, make sure that the power connector cable is
fully inserted in the battery chamber slot before closing the battery-
chamber/memory card slot cover. If part of the cable protrudes from
the slots, the cover or cable may be damaged when the cover is
closed.
Availability may vary with country or region.
See our website or brochures for the latest information.
Download from Www.Somanuals.com. All Manuals Search And Download.
148
Specifications
Nikon COOLPIX S7000 Digital Camera
Type
Compact digital camera
16.0 million (Image processing may reduce the
number of effective pixels.)
Number of effective pixels
1
/2.3-in. type CMOS; approx. 16.76 million total
Image sensor
Lens
pixels
NIKKOR lens with 20× optical zoom
4.5–90.0 mm (angle of view equivalent to that of
25–500 mm lens in 35mm [135] format)
Focal length
f/-number
f/3.4–6.5
Construction
12 elements in 10 groups (1 ED lens element)
Up to 4× (angle of view equivalent to that of
approx. 2000 mm lens in 35mm [135] format)
Digital zoom magnification
Lens shift (still images)
Lens shift and electronic VR (movies)
Vibration reduction
Autofocus (AF)
Contrast-detect AF
•
[W]: Approx. 30 cm (1 ft)–,
[T]: Approx. 2 m (6 ft 7 in.)–
Macro mode: Approx. 1 cm (0.4 in.)–
angle position)
•
(wide-
Focus range
(All distances measured from center of front surface
of lens)
Face priority, manual with 99 focus areas, center,
subject tracking, target finding AF
Focus-area selection
Monitor
7.5 cm (3-in.), approx. 460k-dot, TFT LCD with anti-
reflection coating and 5-level brightness
adjustment
Frame coverage
(shooting mode)
Approx. 99% horizontal and vertical (compared to
actual picture)
Frame coverage
(playback mode)
Approx. 99% horizontal and vertical (compared to
actual picture)
Download from Www.Somanuals.com. All Manuals Search And Download.
149
Storage
Media
Internal memory (approx. 20 MB),
SD/SDHC/SDXC memory card
File system
File formats
DCF and Exif 2.3 compliant
Still images: JPEG
Movies: MOV (Video: H.264/MPEG-4 AVC, Audio:
LPCM stereo)
•
•
•
•
•
•
•
•
16M (High) [4608×3456P]
16M [4608×3456]
8M [3264×2448]
4M [2272×1704]
2M [1600×1200]
VGA [640×480]
Image size
(pixels)
16:9 [4608×2592]
1:1 [3456×3456]
ISO sensitivity
(Standard output
sensitivity)
•
•
ISO 125–1600
ISO 3200, 6400 (available when using Auto
mode)
Exposure
Matrix, center-weighted (digital zoom less than 2×),
spot (digital zoom 2× or more)
Metering mode
Programmed auto exposure and exposure
compensation
Exposure control
Shutter
1
(–2.0 – +2.0 EV in steps of /3 EV)
Mechanical and CMOS electronic shutter
1
•
•
/1500–1 s
1
/4000 s (maximum speed during high-speed
Speed
continuous shooting)
4 s (Fireworks show scene mode)
•
Aperture
Range
Electronically-controlled ND filter (–2 AV) selection
2 steps (f/3.4 and f/6.8 [W])
Self-timer
Flash
Can be selected from 10 s and 2 s
Range (approx.)
(ISO sensitivity: Auto)
[W]: 0.5–2.8 m (1 ft 8 in.–9 ft 2 in.)
[T]: 2.0 m (6 ft 6 in.)
Flash control
TTL auto flash with monitor preflashes
Download from Www.Somanuals.com. All Manuals Search And Download.
150
Interface
USB connector
Micro-USB connector (Do not use any USB cable
other than the UC-E21.), Hi-Speed USB
•
Supports Direct Print (PictBridge)
HDMI output connector
Wi-Fi (Wireless LAN)
Standards
HDMI micro connector (Type D)
IEEE 802.11b/g/n (standard wireless LAN protocol)
Approx. 10 m (10 yd)
Range (line of sight)
Operating frequency
2412–2462 MHz (1–11 channels)
IEEE 802.11b: 5 Mbps
IEEE 802.11g: 15 Mbps
IEEE 802.11n: 15 Mbps
Data rates (actual
measured values)
Security
OPEN/WPA2
Infrastructure
Access protocols
Arabic, Bengali, Bulgarian, Chinese (Simplified and
Traditional), Czech, Danish, Dutch, English, Finnish,
French, German, Greek, Hindi, Hungarian,
Indonesian, Italian, Japanese, Korean, Marathi,
Norwegian, Persian, Polish, Portuguese (European
and Brazilian), Romanian, Russian, Serbian, Spanish,
Swedish, Tamil, Telugu, Thai, Turkish, Ukrainian,
Vietnamese
Supported languages
One Rechargeable Li-ion Battery EN-EL19 (included)
AC Adapter EH-62G (available separately)
Power sources
Charging time
Approx. 1 h 50 min (when using Charging AC
Adapter EH-71P/EH-71PCH and when no charge
remains)
1
Battery life
Still images
Approx. 210 shots when using EN-EL19
Approx. 40 min when using EN-EL19
1/4 (ISO 1222)
Movies (actual battery
life for recording)
2
Tripod socket
Approx. 99.5 × 60.0 × 27.4 mm (4.0 × 2.4 × 1.1 in.)
(excluding projections)
Dimensions (W × H × D)
Approx. 161 g (5.7 oz) (including battery and
memory card)
Weight
Operating environment
Temperature
0°C–40°C (32°F–104°F)
Humidity
85% or less (no condensation)
Download from Www.Somanuals.com. All Manuals Search And Download.
151
•
Unless otherwise stated, all figures assume a fully-charged battery and an
ambient temperature of 23 3°C (73.4 5.4°F) as specified by the Camera
and Imaging Products Association (CIPA).
1
2
Battery life may vary depending on conditions of use, such as the interval between
shots or the length of time that menus and images are displayed.
Individual movie files cannot exceed 4 GB in size or 29 minutes in length.
Recording may end before this limit is reached if camera temperature becomes
elevated.
Rechargeable Li-ion Battery EN-EL19
Type
Rechargeable lithium-ion battery
Rated capacity
Operating temperature
Dimensions (W × H × D)
Weight
DC 3.7 V, 700 mAh
0°C–40°C (32°F–104°F)
Approx. 31.5 × 39.5 × 6 mm (1.3 × 1.6 × 0.3 in.)
Approx. 14.5 g (0.5 oz)
Charging AC Adapter EH-71P/EH-71PCH
Rated input
AC 100–240 V, 50/60 Hz, MAX 0.2 A
Rated output
DC 5.0 V, 1.0 A
Operating temperature
0°C–40°C (32°F–104°F)
Approx. 55 × 22 × 54 mm (2.2 × 0.9 × 2.2 in.)
(excluding plug adapter)
For Argentina: Approx. 55 × 63 × 59 mm (2.2 × 2.5 ×
2.4 in.)
Dimensions (W × H × D)
Weight
Approx. 48 g (1.7 oz) (excluding plug adapter)
For Argentina: Approx. 73 g (2.6 oz)
• Nikon will not be held liable for any errors this manual may contain.
• The appearance of this product and its specifications are subject to change
without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
152
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and
approved for use in this camera.
•
Memory cards with an SD Speed Class rating of 6 or faster are
recommended for recording movies. When using a memory card with a
lower Speed Class rating, movie recording may stop unexpectedly.
SDXC memory
SD memory card
SDHC memory card
card
SanDisk
TOSHIBA
Panasonic
Lexar
2 GB
–
4 GB, 8 GB, 16 GB, 32 GB 64 GB, 128 GB
4 GB, 8 GB, 16 GB, 32 GB 64 GB
2 GB
–
4 GB, 8 GB, 16 GB, 32 GB 64 GB
4 GB, 8 GB, 16 GB, 32 GB 64 GB, 128 GB
•
•
Contact the manufacturer for details on the above cards. We cannot guarantee
camera performance when using memory cards made by other manufacturers.
If you use a card reader, make sure that it is compatible with your memory card.
Trademark Information
• Windows is either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
• Adobe, the Adobe logo, and Reader are either trademarks or registered
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
• SDXC, SDHC, and SD Logos are trademarks of SD-3C, LLC.
• PictBridge is a trademark.
• HDMI, HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the
Wi-Fi Alliance.
• Android and Google Play are trademarks or registered trademarks of
Google, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
153
• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in
the United States and in other countries.
• All other trade names mentioned in this manual or the other
documentation provided with your Nikon product are the trademarks or
registered trademarks of their respective holders.
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the
personal and non-commercial use of a consumer to (i) encode video in
compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC
video that was encoded by a consumer engaged in a personal and non-
commercial activity and/or was obtained from a video provider licensed to
provide AVC video. No license is granted or shall be implied for any other
use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com.
FreeType License (FreeType2)
• Portions of this software are copyright © 2012 The FreeType Project
(http://www.freetype.org). All rights reserved.
MIT License (HarfBuzz)
• Portions of this software are copyright © 2015 The HarfBuzz Project
(http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights
reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
154
Index
Symbols
AAuto mode...................... 12, 19, 21 Auto off............................................ 14, 113
xScene auto selector mode
Auto with red-eye reduction ....... 42
................................................................ 22, 23 Autofocus..................... 54, 71, 88, 101
B
b(emovie-record) button
Battery-chamber/memory card slot
Battery latch................................................ 7
Blink proof................................................ 90
C
Capturing still images while
Connecting to smart devices
dMenu button
A
Continuous.............................................. 82
Download from Www.Somanuals.com. All Manuals Search And Download.
155
Copying images................................... 94 Focus................................................... 52, 85
Creative slider........................................ 46 Focus area................................................ 52
Crop..................................................... 58, 68 Focus indicator ................................. 3, 13
Cross process o.................................. 33 Focus lock ................................................. 55
Current settings ................................. 104 Food u.............................................. 22, 26
Format internal memory............... 114
D
Frame rate.............................................. 103
Functions that cannot be used
Date stamp............................................. 110
Daylight..................................................... 80
simultaneously...................................... 56
G
D-Lighting ............................................... 64 Glamour retouch ........................ 35, 66
H
E
Easy panorama playback................. 32 HDR .............................................................. 24
Editing images....................................... 63 Help.............................................................. 23
EN-EL19................................................... 152 High-speed continuous .................. 82
Eyelet for camera strap................... ii, 1 HS movie....................................... 98, 100
F
I
Face priority............................................. 85 Image mode........................................... 78
File names.............................................. 147 Image quality ......................................... 78
Fill flash...................................................... 42 Image review....................................... 108
Firmware version................................ 116 Image size ................................................ 78
Fixed range auto.................................. 84 Incandescent.......................................... 80
Flash ............................................... 1, 41, 80 Internal memory ...................................... 7
Flash mode ..................................... 41, 42 .............................................................. 3, 5, 12
Flash off..................................................... 42 Interval ....................................................... 89
Fluorescent............................................. 80 ISO sensitivity......................................... 84
Download from Www.Somanuals.com. All Manuals Search And Download.
156
L
P
Landscape c......................................... 22 Paper size.................................... 125, 126
Language............................................... 114 Party/indoor f............................ 22, 25
Lens............................................ 1, 135, 149 Pet portrait auto release.................. 27
Lens cover..................................................... 1 Pet portrait O............................... 22, 27
List by date mode............................... 60 Photo info.............................................. 108
Photo VR................................................... 111
M
Playback ..................................................... 16
Playback mode....................................... 16
Power switch/power-on lamp
Preset manual......................................... 81
Pressing all the way............................. 15
Protect........................................................ 93
Microphone (stereo) .............................. 1
Monitor settings ................................ 108
Movie VR................................................. 102
N
Q
R
Number of exposures remaining
Recording slow motion movies
......................................................................... 79 ............................................................ 98, 100
Number of shots.................................. 89 Red-eye correction............................. 65
Remaining movie recording time
O
Reset all.................................................... 116
Options.................................................... 104
Download from Www.Somanuals.com. All Manuals Search And Download.
157
Telephoto.................................................. 15
S
Scene mode ............................................ 22 Text input............................................... 105
Security settings...................... 104, 119 Time difference.................................. 106
Self-Collage..................................... 37, 89 Time zone....................................... 11, 106
Self-timer.................................................. 43 Time zone and date................ 10, 106
Setup menu................................. 76, 106 Tripod socket................................... 2, 151
Shooting.................................................... 19
U
Short movie show mode................. 38
Single........................................................... 82
Slide show ................................................ 92
Smart portrait mode .......................... 35
Sound settings..................................... 112
Speaker........................................................... 1
Special effects mode.......................... 33
V
Volume....................................................... 73
W
White balance........................................ 80
Z
Zooming in/out..................................... 15
T
Download from Www.Somanuals.com. All Manuals Search And Download.
158
Download from Www.Somanuals.com. All Manuals Search And Download.
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
FX5C02(11)
©D2o0w1n5loNadikforonmCWowrpw.oSroamtiaonnuals.com. All Manuals Search A6nMd NDo5w2n6l1oa1d-0. 2
|
