Camera Control Pro 2 Reference Manual
Overview
This section describes the structure of this manual, outlines the main func-
tions of Camera Control Pro 2, and gives the system requirements and instal-
lation instructions.
Using Camera Control Pro 2
This section describes how to use Camera Control Pro 2.
Appendices
This section lists preferences and describes how to uninstall the software.
Important Information on the Product Key
The product key may be found on the CD-ROM case. Do not lose this key. It is required when
installing or upgrading this software and can not be replaced if lost.
Product key
xxxxx–xxx–xxxx–xxxx–xxxx–xxxx
SB8A02(B1)
6MS541B1-02
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Using Camera Control Pro
Appendices
Introduction
1/3
This manual has been written to help you take advantage of the many features in-
cluded in Camera Control Pro 2. Be sure to read this manual thoroughly, and to keep
it handy when using Camera Control Pro 2.
Conventions
This manual assumes basic knowledge of cameras and Windows or Finder operations. Refer to the
documentation provided with your computer or camera for more information. Where the Windows
and Macintosh versions of the program use differing commands, the Windows menu name is listed
first, followed by the Macintosh menu name in square brackets. Where multiple menu items or folders
are selected in sequence, the menu items are separated by a “>”.
Throughout this manual, Windows Vista Home Basic, Home Premium, Business, Enterprise, and Ul-
timate 32-bit editions are referred to as “Windows Vista.” Windows XP Professional and Windows
XP Home Edition are referred to as “Windows XP.” Windows 2000 Professional is referred to as “Win-
dows 2000.” D1, D1X, and D1H cameras are referred to as “D1-series cameras,” D2Xs, D2X, D2Hs, and
D2H cameras as “D2-series cameras,” D70s and D70 cameras as “D70-series cameras,” and D40 and
D40X cameras as “D40-series cameras.” Except where necessary to distinguish it from older versions
of Camera Control Pro, Camera Control Pro 2 is referred to as “Camera Control Pro.”
Illustrations
This manual is for use with both Windows and Macintosh. While the majority of the illustrations
come from Windows Vista Ultimate, save where otherwise noted the operations described are the
same in other operating systems. Depending on the operating system used, the dialogs and menus
may differ from slightly from those shown here. Some illustrations are composites.
Printing This Manual
To print this manual, select Print from the File menu in Adobe Reader. This manual is A5 size, al-
lowing facing pages to be printed on a single sheet of A4 paper (to print facing pages, start printing
from an even-numbered page).
Installing/Uninstalling Camera Control Pro 2
Use an account with administrator privileges to install or uninstall Camera Control Pro 2.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
3
Overview
Using Camera Control Pro
Appendices
Introduction
2/3
Camera Control Pro
Changes made to settings in the Camera Control Pro window only apply to photographs taken after
the changes are made, not to photographs that have already been taken. Camera Control Pro can
not be used to modify existing photographs.
The controls in the Camera Control Pro window vary with the type of camera connected. More
information on camera settings may be found in the documentation provided with your camera.
Illustrations
Save where otherwise noted, the illustrations in this section show the dialogs displayed when the
D3 is connected.
Camera Control Pro 2 for D100 Cameras (Macintosh)
Before using Camera Control Pro with a D100 digital camera under Mac OS X, confirm that the
camera firmware is version 2.00 or later. Users of earlier versions will need to upgrade the camera
firmware before using Camera Control Pro. Contact a Nikon-authorized service representative for
information on firmware upgrades.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
4
Overview
Using Camera Control Pro
Appendices
Introduction
3/3
Customer Support
To link to a Nikon customer support website, click Link to Nikon in the Camera
Control Pro 2 installer window and click the link for your region. Click herre for more
information.
Notices
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in
these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this product.
• While every effort has been made to ensure that the information in these manuals is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of
the Nikon representative in your area (address provided separately).
Note
The copying or reproduction of copyrighted creative works such as books, music, paintings, wood-
cut prints, maps, drawings, movies, and photographs is governed by national and international
copyright laws. Do not use the camera for the purposes of making illegal copies or to infringe copy-
right laws. Do not use in venues where photography or recording is prohibited.
Trademark Information
Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation. Ado-
be Reader and Acrobat are registered trademarks of Adobe Systems, Inc. Macintosh, Mac OS, and
QuickTime are registered trademarks of Apple Computer, Inc. All other trade names mentioned in
this manual or the other documentation provided with your Nikon product are trademarks or regis-
tered trademarks of their respective holders.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
5
Overview
Using Camera Control Pro
Appendices
About This Manual
How to Use This Manual
The pages of this manual are structured as shown here:
0WFSWJFX
6TJOHꢀ$BNFSBꢀ$POUSPMꢀ1SP
"QQFOEJDFT
ቢ
ባ
$BNFSBꢀ$POUSPMTꢀ
ꢂꢃꢄꢅ
5IFꢀ&YQPTVSFꢀꢁꢀ5BC
5IFꢀGPMMPXJOHꢀTFUUJOHTꢀDBOꢀCFꢀBEKVTUFEꢀGSPNꢀUIFꢀ&YQPTVSFꢀꢁꢀUBCꢂ
ቤ
5IFꢀGPDVTꢀQPJOUꢀBOEꢀGPDVTꢀBSFBꢀDBOꢀCFꢀTFMFDUFEꢀVTJOHꢀUIFꢀBSSPXꢀCVUUPOTꢃꢀTFFꢀUIFꢀ
DBNFSBꢀNBOVBMꢀGPSꢀEFUBJMTꢂꢀꢀ'PSꢀJOGPSNBUJPOꢀPOꢀ"'ꢄBSFBꢀNPEFꢀBOEꢀGPDVTꢀNPEFꢅꢀTFFꢀ
'PDVTꢀ1PJOU
'PDVTꢀ"SFB
i5IFꢀ.FDIBOJDBMꢀ5BCꢁw
ብ
5IFꢀNFUFSJOHꢀNPEFꢀDBOꢀCFꢀTFMFDUFEꢀGSPNꢀUIJTꢀNFOVꢀ %ꢆꢅꢀ%ꢁꢀTFSJFTꢅꢀ%ꢆꢇꢇꢅꢀ%ꢁꢇꢇꢅꢀ
%ꢈꢇꢅꢀ%ꢉꢇꢀTFSJFTꢅꢀ%ꢊꢇꢅꢀBOEꢀ%ꢋꢇꢀTFSJFTꢀPOMZꢌꢂꢀꢀ.FUFSJOHꢀNPEFꢀEFGBVMUTꢀUPꢀUIFꢀPQUJPOꢀ
TFMFDUFEꢀXJUIꢀUIFꢀDBNFSBꢂꢀꢀ*GꢀBꢀ%ꢍꢄTFSJFTꢀPSꢀ%ꢍꢇꢇꢀDBNFSBꢀJTꢀDPOOFDUFEꢅꢀUIFꢀDVSSFOUꢀ
NFUFSJOHꢀNPEFꢀXJMMꢀCFꢀTIPXOꢅꢀCVUꢀDIBOHFTꢀDBOꢀPOMZꢀCFꢀNBEFꢀVTJOHꢀDBNFSBꢀDPOꢄ
USPMTꢂꢀꢀ4FFꢀUIFꢀDBNFSBꢀNBOVBMꢀGPSꢀEFUBJMTꢂ
.FUFSJOHꢀ
.PEF
'MBTIꢀ4ZODꢀ
.PEF
5IJTꢀPQUJPOꢀDPOUSPMTꢀUIFꢀDBNFSBꢀnBTIꢀTZODꢀNPEFꢂꢀ4FFꢀUIFꢀDBNFSBꢀNBOVBMꢀGPSꢀEFꢄ
UBJMTꢂ
3FUVSOꢀUPꢀmSTUꢀQBHF
$BNFSBꢀ$POUSPMꢀ1SPꢀꢁ
ꢀꢁ
ቦ
ቢ
Click here to go to the beginning of each of the three chapters. The chapter you
are currently viewing is displayed in a darker color.
ባ
ቤ
ብ
Page title
Description
Bluue unnderlinneed teexxtt indicates a link to another part of this manual or the World
Wide Web. Click the text to follow the link (note that a web browser and an In-
ternet connection are required to link to the World Wide Web). To return to the
previous topic, click the
button in Adobe Reader.
ቦ
Click here to return to the first page.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
6
Overview
Using Camera Control Pro
Appendices
System Requirements
Windows
Before installing Camera Control Pro, be sure that your system meets the following
requirements:
CPU
OS
Intel Celeron, Pentium 4, or Intel Core series processor with a clock speed
of 1GHz or faster recommended
Preinstalled versions of Windows Vista (32-bit Home Basic/Home Premi-
um/Business/Enterprise/Ultimate editions), Windows XP (Home Edition/
Professional), Windows 2000 Professional
Hard-disk space
RAM
50MB required for installation, with an additional 1GB of free disk space
available when Camera Control Pro is running
• Windows Vista: 512MB (768MB or more recommended)
• Other versions of Windows: 256MB (768MB or more recommended)
Video resolution
Interface*
1,024×768pixels or more with 24-bit color (True Color) or higher
USB: Only built-in USB ports supported
IEEE 1394: OHCI-compliant IEEE 1394 interface board or card required †
Supported cameras D3, D2-series, D1-series ‡, D300, D200, D100, D80, D70-series, D50, and D40-
series cameras
Miscellaneous
• CD-ROM drive required for installation
• Internet connection required for Nikon Message Center
* Connect the camera directly to the computer. The camera may not function as expected when
connected via a hub, extension cable, or keyboard.
† See the website below for the latest information on boards that have been tested and approved
for use.
‡ D1-series cameras not supported under Windows Vista.
Check the support information at the website below for the latest on compatible
cameras and operating systems.
Additional information may be available from the Nikon representative in your area.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
7
Overview
Using Camera Control Pro
Appendices
System Requirements
Macintosh
Before installing Camera Control Pro, be sure that your system meets the following
requirements:
CPU
PowerPC G4 or G5 model, Intel Core, or Intel Xeon with a clock speed of
1GHz or faster recommended
OS
Mac OS X version 10.3.9 or 10.4.10
Hard-disk space
100MB required for installation, with an additional 1GB of free disk space
available when Camera Control Pro is running
RAM
256MB (768MB or more recommended)
Video resolution
Interface*
1,024×768pixels or more with 24-bit color (millions of colors) or higher
USB: Only built-in USB ports supported
FireWire: Only built-in FireWire ports supported
Supported cameras D3, D2-series, D1-series †, D300, D200, D100, D80, D70-series, D50, and D40-
series cameras
Miscellaneous
• CD-ROM drive required for installation
• Internet connection required for Nikon Message Center
* Connect the camera directly to the computer. The camera may not function as expected when
connected via a hub, extension cable, or keyboard.
† D1-series cameras not supported on computers with Intel CPUs running Mac OS X version
10.3.9.
Check the support information at the website below for the latest on compatible
cameras and operating systems.
Additional information may be available from the Nikon representative in your area.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
8
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Before installing Camera Control Pro:
• Confirm that the computer satisfies the systeem reqquuiiremeenntts for Camera Control
Pro.
• Exit any other applications that may be running, including anti-virus software.
Follow the links below to view installation instructions for your operating system:
Windows
Macintosh
Existing Versions of Camera Control Pro
If an earlier version of Camera Control Pro is installed, uninstall the existing version before installing
Camera Control Pro 2. If an existing copy of Camera Control Pro 2 is detected during installation, a
notification will be displayed. Follow the on-screen instructions.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
9
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Windows 1/6
Use an account with administrator privileges when installing Camera Control Pro.
Camera Control Pro 2 Install Options
To display install options for Camera Control Pro:
Insert the installer CD in a CD-ROM drive.
1
Windows Vista
An AutoPlay dialog will be displayed; click Run Welcome.exe. A “User Ac-
count Control” dialog will be displayed; click Allow.
A language-selection dialog will be displayed; select a language and click
Next. If the desired language is not available, click Region Selection to
choose a different region and then choose the desired language .
2
If the Language Selection Dialog Is Not Displayed
To display the language selection dialog, select Computer or My Computer from the Start menu
(Windows Vista or Windows XP) or double-click the My Computer icon on the desktop (Windows 2000)
and double-click the CD-ROM (Camera Control Pro) icon in the My Computer window.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
10
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Windows 2/6
Easy Install: Install the minimum software
needed to run Camera Control Pro.
Custom Install: Install selected software
(not displayed in Windows Vista).
Link to Nikon: Download ViewNX or trial
versions of Nikon software or visit Nikon
technical support websites (Internet con-
nection required).
Quit: Close this dialog.
Instruction Manual: Open the “Manuals”
folder, which contains software instruction
manuals. Double-click INDEX.pdf to view
a region selection screen.
To uninstall Camera Control Pro, see Uniinssttaalllingg Cameerraa CCoonnttrrooll Pro.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
11
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Windows 3/6
Follow the steps below to install Camera Control Pro:
Click Easy Install.
1
Click Next.
2
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
12
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Windows 4/6
ቢ
After reading the license agreement ( ), select I accept the terms of the
3
ባ
ቤ
license agreement ( ) and click Next ( ) to proceed with installation.
ቢ
ባ
ቤ
A “ReadMe” file will be displayed. Take a moment to read this file, which may
contain information that could not be included in this manual, and then click
Next.
ቢ
ባ
Personalize your copy of Camera Control Pro ( ) and click Next ( ).
4
ቢ
ባ
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
13
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Windows 5/6
The destination folder for Camera Control Pro will be displayed under “Install
Camera Control Pro to.” Click Next to install Camera Control Pro to this folder,
or click Change… to select another destination.
5
Click Install.
6
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
14
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Windows 6/6
Click Finish.
7
Click Yes and remove the installer CD from the CD-ROM drive.
8
If a dialog is displayed directing you to restart the computer, follow the on-
screen instructions.
This completes installation of Camera Control Pro.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
15
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Macintosh 1/5
Use an account with administrator privileges when installing Camera Control Pro.
Camera Control Pro 2 Install Options
To display install options for Camera Control Pro:
Insert the installer CD in a CD-ROM drive. Double-click the Camera Control
1
Pro CD-ROM icon (
) icon.
) on the desktop and then double click the Welcome
(
The following dialog will be displayed; enter an administrator name and
password and click OK.
2
A language-selection dialog will be displayed; select a language and click
Next. If the desired language is not available, click Region Selection to
choose a different region and then choose the desired language.
3
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
16
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Macintosh 2/5
Easy Install: Install the minimum software
needed to run Camera Control Pro.
Link to Nikon: Download ViewNX or trial
versions of Nikon software or visit Nikon
technical support websites (Internet con-
nection required).
Instruction Manual: Open the “Manuals”
folder, which contains software instruction
manuals. Double-click INDEX.pdf to view
a region selection screen.
Quit: Close this dialog.
To uninstall Camera Control Pro, see Uniinssttaalllingg Cameerraa CCoonnttrrooll Pro.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
17
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Macintosh 3/5
Follow the steps below to install Camera Control Pro:
Click Easy Install.
1
ቢ
ባ
After reading the license agreement ( ), click Accept ( ).
2
ቢ
ባ
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
18
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Macintosh 4/5
Click Install.
3
ቢ
ባ
Personalize your copy of Camera Control Pro ( ) and click OK ( ).
4
5
ቢ
ባ
Click Yes.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
19
Overview
Using Camera Control Pro
Appendices
Installing Camera Control Pro
Macintosh 5/5
Click Quit.
6
Click OK and remove the installer CD from the CD-ROM drive.
7
This completes installation of Camera Control Pro.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
20
Overview
Using Camera Control Pro
Appendices
Starting and Exiting Camera Control Pro
1/7
Starting Camera Control Pro
Turn the camera off and use the interface cable to connect the camera to the
computer as described in the camera manual. If you are using a D1-series
camera, choose “PC” as the operating mode. If you are using a D100, choose
P, S, A, or M mode. Users of D3, D2-series, D300, and D200 cameras can select
any mode other than M-UP (mirror up). Other cameras can be connected in
any shooting mode.
1
LANs
See the wireless transmitter user’s manual for information on controlling cameras connected to lo-
cal area networks (LANs) using WT-2, WT-3, or WT-4 wireless transmitters.
USB
When using the D100 under Windows 2000, log in to an administrator account and set the camera
USB option to Mass Storage; otherwise, set the camera USB option to PTP. When using other
cameras equipped with a USB interface, set the camera USB option to PTP or MTP/PTP. D1-series
cameras do not support USB.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
21
Overview
Using Camera Control Pro
Appendices
Starting and Exiting Camera Control Pro
2/7
Turn the camera on. If Nikon Transfer or PictureProject Transfer starts, click
the close button.
2
USB Connection to Windows Vista/XP Computers
When a camera with USB interface is connected to a Windows XP computer, an AutoPlay dialog may
be displayed.
Select the Camera Control Pro option to start Camera Control Pro.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
22
Overview
Using Camera Control Pro
Appendices
Starting and Exiting Camera Control Pro
3/7
Start Camera Control Pro.
3
Windows
Method 1: Double-click the Camera Control Pro 2 shortcut on the desktop.
Method 2: Click Start and select Camera Control Pro 2 in the program list.
Macintosh
Method 1: Click the Camera Control Pro 2 icon in the Dock (if available).
Method 2: Open the “Nikon Software/Camera Control Pro 2” folder in the “Ap-
plications” folder and double-click the Camera Control Pro 2 icon.
Product Key
If prompted to supply a prroducctt key, enter the key found on the product packaging and click OK.
Be sure not to lose the key or the key for any existing versions of Camera Control Pro, as they may be
required when re-installing or upgrading the product.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
23
Overview
Using Camera Control Pro
Appendices
Starting and Exiting Camera Control Pro
4/7
The Camera Control Pro window will be displayed.
4
Windows
Macintosh
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
24
Overview
Using Camera Control Pro
Appendices
Starting and Exiting Camera Control Pro
5/7
Product Key
If prompted to supply a prroducctt key, enter the key found on the product packaging and click OK.
Users of the trial version will see a dialog listing the time remaining in the thirty-day trial period; click
Trial to use the trial version or Buy (if available) to visit a website where you can purchase a product
key (Internet connection required). Be sure not to lose the key, as it may be required when re-install-
ing or upgrading the product.
No Camera Connected
Most features of Camera Control Pro are only available when a camera is connected and turned on.
If no camera is detected, the message shown below will be displayed. Connect the camera and
turn it on.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
25
Overview
Using Camera Control Pro
Appendices
Starting and Exiting Camera Control Pro
6/7
Exiting Camera Control Pro
Windows
Select Exit from the File menu.
Macintosh
Select Quit Camera Control Pro from the application menu.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
26
Overview
Using Camera Control Pro
Appendices
Starting and Exiting Camera Control Pro
7/7
Disconnecting the Camera
To disconnect the camera:
• USB (PTP or MTP/PTP)/IEEE 1394 (FireWire): Turn the camera off and disconnect the
interface cable.
• USB (Mass Storage): When using a D100 camera under Windows 2000 with the cam-
era USB option set to Mass Storage, click the “Unplug or Eject Hardware” icon
in the taskbar and select Stop USB Mass Storage Device from the menu that
appears, then turn the camera off and disconnect the interface cable.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
27
Overview
Using Camera Control Pro
Appendices
Getting Help
To view help on Camera Control Pro, select Camera Control Pro Help from the
Help menu.
Windows
Macintosh
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
28
Overview
Using Camera Control Pro
Appendices
Software Updates
Camera Control Pro is equipped with an automatic update function known as Nikon
Message Center. Nikon Message Center checks for updates to a variety of Nikon
digital products, including Camera Control Pro. If the computer is connected to the
Internet, Nikon Message Center will automatically check for updates when Camera
Control Pro starts. You can also check for updates by selecting Check for Software
Updates… from the Help menu. If an update is available, an update dialog will be
displayed.
Downloading Updates
An Internet connection is required to download updates. The user bears all applicable fees charged
by the phone company or Internet service provider.
Dial-up Connections
When using a dial-up connection, be aware that the connection is not automatically terminated
when download is complete. Be sure to terminate the connection manually.
Privacy
Information provided by the user as part of this service will not be given to third parties without the
user’s permission.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
29
Overview
Using Camera Control Pro
Appendices
Using Camera Control Pro
Screen Layout
31
33
39
42
46
50
54
72
73
77
Capturing Photographs to Disk
Viewing Captured Photographs
Time Lapse Photography
Live View
The Camera Control Pro Window
Camera Controls
Saving and Loading Camera Control Settings
The Camera Menu
Custom Settings
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
30
Overview
Using Camera Control Pro
Appendices
Screen Layout
1/2
Camera Control Pro screen layout is described below using the D3 as an example.
Windows
ቢ
ባ
ቤ
ብ
ቦ
ቧ
ቨ
ቢ
ባ
ቤ
Menu bar
Connection status: Shows the status and name of any cameras connected.
/ : View or hide camera controls. Camera controls can also be displayed or
hidden by selecting Show/Hide Camera Control Panels in the Tools menu.
Camera control tabs: Click to view the associated camera controls.
Camera coontrollss
ብ
ቦ
ቧ
Simulaatteed LCD paaneel: Performs the same function as the information display in
the camera viewfinder.
ቨ
Shhoooott buttttonnss: Click these buttons to take pictures.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
31
Overview
Using Camera Control Pro
Appendices
Screen Layout
2/2
Macintosh
ቢ
ባ
ብ
ቤ
ቦ
ቧ
ቨ
ቢ
ባ
ቤ
Menu bar
Connection status: Shows the status and name of any cameras connected.
: View or hide camera controls. Camera controls can also be displayed or
/
hidden by selecting Show/Hide Camera Control Panels in the Tools menu.
Camera control tabs: Click to view the associated camera controls.
Camera coontrollss
Simulaatteed LCD paaneel: Performs the same function as the information display in
the camera viewfinder.
ብ
ቦ
ቧ
ቨ
Shhoooott buttttonnss: Click these buttons to take pictures.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
32
Overview
Using Camera Control Pro
Appendices
Capturing Photographs to Disk
1/6
If Camera Control Pro is running when a supported camera connected, pictures
taken with the camera will be stored on your computer hard disk, not the camera
memory card.
Start Camera Control Pro.
1
Select Download Options… in the Tools menu to display download op-
tions.
2
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
33
Overview
Using Camera Control Pro
Appendices
Capturing Photographs to Disk
2/6
Adjust capture options:
3
Folder for images downloaded from the camera
Select the folder to which photographs will be downloaded as they are tak-
en.
Next file name to be used
Shows how images download to the computer will be named. To change
how files are named, click Edit.... The dialog shown at below will be dis-
played. Using the sample file name as a guide, enter a prefix and suffix and
choose the starting number and number of digits for automatic file number-
ing. You can also use the shooting date and time in the file name.
Step 3 coonnttiinnuueess oonn tthhee nneexxtt ppaagge
File Naming Conventions
Windows: File names may not contain quotes or any of the following characters: “\” “/” “:” “*” “?” “<“ “>”
and “|”. Periods (“.”) may not appear at the beginning or the end of file names.
Macintosh: The maximum length for Macintosh file names is thirty-one characters. Colons (“:”) are
not allowed.
Extensions: Extensions are assigned automatically. The following extensions are used: “.JPG” (JPEG
images), “.TIF” (TIFF images), “.NEF” (NEF/RAW images), and “.NDF” (Image Dust Off reference data).
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
34
Overview
Using Camera Control Pro
Appendices
Capturing Photographs to Disk
3/6
When a new image is received from camera
Choose the application that will be used to display captured photographs
after they are saved to disk.
•
Do nothing: Photographs are not displayed after being saved to the com-
puter hard disk.
•
•
Show it with ViewNX (available only if ViewNX is installed): ViewNX starts au-
tomatically and displays the captured images. See ViewNX help for details.
Use the latest version of ViewNX.
•
Send it to Capture NX watched folder (available only if Capture NX is installed
and the “Watched folder” is selected): If CaptureNX (available separately) is
running, photographs will be saved in the folder currently selected as the
“Watched folder” (be sure that Capture NX supports the camera; see the
Capture NX manual for details). Capture NX will automatically process the
pictures according to the batch settings in Capture NX.
Step 3 coonnttiinnuueess oonn tthhee nneexxtt ppaagge
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
35
Overview
Using Camera Control Pro
Appendices
Capturing Photographs to Disk
4/6
Attach IPTC Information
Check this option to add IPTC information to captured images and enable
the Copy Shooting Data to IPTC Caption option.
IPTC Information…
Clicking this button displays a dialog where you can select the IPTC informa-
tion, including keywords and captions, that will be added to images as they
are captured.
Copy Shooting Data to IPTC Caption
Check this option to copy shooting data to the caption field of images as
they are captured.
Embed ICC Profile
Select this option to embed an ICC profile according to the camera Color
Space settings. The ICC profile is embedded in JPEG and TIFF images as they
are captured.
D3
D2Xs
D300
D2X*
D2Hs*
D200*
Image Authentication
The Attach IPTC Information and Embed ICC Profile options do not apply to photographs
taken with Image Authentication on. Image authentication information is not embedded in TIFF
photographs when capturing images using the Camera Control Pro.
*Image Authentication supported from camera firmware version 2.00.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
36
Overview
Using Camera Control Pro
Appendices
Capturing Photographs to Disk
5/6
After adjusting options as described in Step 3, click OK to exit the dialog
and apply settings to subsequent photographs. Note that if On or Auto-
matic (the default setting) is selected for the auto image rotation option in
the camera setup menu, D3, D2-series, D300, D200, D80, D70-series, D50, and
D40-series cameras will detect camera orientation and automatically embed
this information in photographs (note that in continuous mode, the orienta-
tion for the first image in each burst applies to all images in the series, even
if camera orientation is changed during shooting). If Off is selected, camera
orientation will not be recorded. To add information on picture orientation
during download, open the Image menu and selecting Rotate all down-
loaded images by 90 degrees CCW to mark pictures as being rotated 90 °
to the right, or Rotate all downloaded images by 90 degrees CW to
mark pictures as being rotated 90° to the left.
4
D3
D2Xs
D300
D2X*
D2Hs*
D200*
Image Authentication
The “Rotate all downloaded images…” options do not apply to photographs taken with Image Au-
thentication on. Image authentication information is not embedded in TIFF photographs when cap-
turing images using the Camera Control Pro.
*Image Authentication supported from camera firmware version 2.00.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
37
Overview
Using Camera Control Pro
Appendices
Capturing Photographs to Disk
6/6
Take pictures using the camera shutter-release button or the AF and Shoot
or Shoot buttons in the Camera Control Pro window. The Status dialog
shown below will be displayed.
5
Close button
Triangle
To display a histogram of the current image, click the triangle at the bottom
of the Status dialog.
If the Show highlights over option is checked, any areas of the preview im-
age with a brightness over the value entered in the neighboring text box will
be indicated by a flashing border. To display histograms (graphs showing
the distribution of pixels of different brightnesses in the image) for the red
(R), green (G), and blue (B) channels, put a check in the corresponding box.
Click Close to close the Status dialog.
6
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
38
Overview
Using Camera Control Pro
Appendices
Viewing Captured Photographs
1/3
If Show it with Viewer is selected for Wheenn a neeww immaaggee iiss rreecceeiivveed froom camera
in the “Doowwnnlooaadd OOppttionss”” ddiiaalloogg, pictures will automatically be displayed in the
“Viewer” window after capture. The “Viewer” window can also be started by selecting
Show Viewer from the Tools menu. The most recent image in the folder selected
for Folder for images downloaded from the camera in the “Download Options”
dialog will be displayed.
Title bar
Tool bar
Thumbnail area
Image area
The Title Bar
The title bar contains the following items:
Item
Description
The file name of the image currently displayed in the image area. If the image
was recorded at an image quality of NEF (RAW)+JPEG, both extensions will be
displayed (e.g., “Img0001.jpg/nef”).
Click to minimize the “Viewer” window.
Click to maximize the “Viewer” window.
Click to close the “Viewer” window.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
39
Overview
Using Camera Control Pro
Appendices
Viewing Captured Photographs
2/3
The Toolbar
The toolbar contains the following items:
Item
Name
Description
Click this button or press the left arrow on the keyboard to
select the next image to the left in the thumbnail area.
Click this button or press the right arrow on the keyboard to
select the next image to the right in the thumbnail area.
Choose the size of the thumbnails displayed in the thumbnail
area.
Back
Next
Thumbnail slider
Thumbnail
View or hide the thumbnail area.
Display focus point or focus area used when taking picture.
Focus area is displayed in red.
Show focus point
Fit to screen Fit image to viewing area (maximum zoom ratio is 100%).
100%
50%
View image at 100%.
View image at 50%.
Click this button or press the Delete key on the keyboard
(Macintosh users press command+delete) to delete the current
image.
Delete
Show Focus Point
Focus point (focus area) display is only available with photographs taken with Nikon digital SLR
cameras. It will not be displayed in photographs taken with a non-CPU lens, manual focus, or when
focus areas not displayed in the viewfinder.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
40
Overview
Using Camera Control Pro
Appendices
Viewing Captured Photographs
3/3
The Thumbnail Area
Lists the images in the folder selected for Folder ffoor iimmaggees ddownloaded froomm
thee caammerra in the “Download Options” dialog, sorted by date of modification with
the most recent images on the right.
The Image Area
Shows the image currently selected in the thumbnail list. If Show it with Viewer is
selected for Wheenn a neeww immaaggee iiss rreecceeiivveed frrom ccaammera in the “Download Op-
tions” dialog, the most recent picture will automatically be displayed in the image
area after capture.
The D3 and D300 Buffer
If Show it with Viewer is selected for When a new image is received from camera in the
“Download Options” dialog, the images in the camera buffer will be displayed on the right of the
thumbnail area before being downloaded to the computer. To preview an image in the image area,
select it in the thumbnail list (no file name will appear in the title bar). Images deleted from the buf-
fer will not be downloaded to the computer.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
41
Overview
Using Camera Control Pro
Appendices
Time Lapse Photography
1/4
Using Camera Control Pro, you can take a series of photographs automatically at a
time interval you select.
Select Time Lapse Photography… from the Camera menu. The Time
Lapse Photography dialog will be displayed.
1
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
42
Overview
Using Camera Control Pro
Appendices
Time Lapse Photography
2/4
Before shooting starts, adjust the following settings:
2
Autofocus before each shot
If this option is checked, the camera will perform an autofocus operation be-
fore each shot. If the selected focus mode is AF-A (D80, D50, and D40-series
cameras) or single-servo AF, an autofocus operation will be performed even
when the check box is off.
Keep shooting until cancelled
If this option is checked, the camera will continue to take photographs until
you click Stop Shooting in the Time Lapse Photography dialog.
D3
D2 series
D300
D200
D80
D70 series
D50
Auto bracketing
Select this option to perform exposure, flash, or
white balance bracketing during shooting. To
change bracketing options, click Set BKT.... The
dialog shown at right will be displayed.
AE/WB/Flash
Bracketing
Choose the type of bracketing per-
formed.
Change Factor when
Exposure Mode is set
to Manual
D3/D2 series/D300/D200
Choose how bracketing is per-
formed in manual exposure mode.
D3
D2 series
D200
D300
Choose the bracketing program, ex-
posure or white balance increment,
bracketing order, and exposure
mode. Bracketing type and brack-
eting order are not available with
the D50.
Bracketing Type/
Bracketing Step/
Bracketing Order/
Exposure Mode
D80/D70 series/D50
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
43
Overview
Using Camera Control Pro
Appendices
Time Lapse Photography
3/4
Use the Shots box to choose a number of shots from 2 to 9,999. This option
is not available when Keep shooting until cancelled is selected.
3
4
The delay between shots can be set to any value between 00:00:01 (one
second) and 99:59:59 (ninety-nine hours, fifty-nine minutes, and fifty-nine
seconds).
Click Start. If Send it to Capture NX watched folder is selected for
Wheenn a neeww imagee is reecceeiivved froomm caammeerra in the “Downllooaadd OOpp--
tiionss”” ddialog, photographs will be saved to the “watched” folder selected
in Capture NX (available separately; see the Capture NX manual for details).
Capture NX will automatically process the pictures according to the batch
settings in Capture NX.
5
Time Interval Settings
If the delay is shorter than the time required to record each photograph, the actual interval between
photographs will be longer than that specified in the “Time Lapse Photography” dialog.
D1 series
Auto Off
When the camera is operated on battery power and forr 15 minnutes has been selected for “While
Camera Control Pro is running, keep camera awake” in the General tab of the Preferences dialog,
choose a delay of fifteen minutes or less. When taking photographs at longer intervals, use an AC
adapter (available separately) to power the camera.
During Time-Lapse Photography
No operations can be performed in the “Camera Control Pro” window until the “Time Lapse Pho-
tography” dialog is closed.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
44
Overview
Using Camera Control Pro
Appendices
Time Lapse Photography
4/4
Follow the progress of time lapse photography in the progress dialog.
6
Click Stop Shooting to end time lapse photography at any time. If a num-
ber of shots was specified in the “Time Lapse Photography” dialog, shooting
will end when the specified number of shots has been taken.
Once the specified number of shots has been taken, the Stop Shooting
button will change to Shooting Complete. Click Shooting Complete to
exit the “Time Lapse Photography” dialog.
7
Error Logs
If an error occurs during shooting, an error log will be displayed; click OK to close the log and return
to the Camera Control Pro window.
The Time Lapse Photography Dialog
If you make a mistake in entering settings in the “Time Lapse Photography” dialog, a warning will be
displayed. Return to the “Time Lapse Photography” dialog and adjust settings as directed.
Hard Disk Full
A warning will appear when space is no longer available on the destination disk for photographs
taken using time lapse photography. Use the information in the warning to reduce the number of
photographs or change the destination drive.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
45
Overview
Using Camera Control Pro
Appendices
Live View
1/4
When a camera that supports live view is connected, Live View (Hand-Held) and
Live View (Tripod) options are available in the Camera menu. Selecting either
of these options opens the “Live View” window. Camera controls can not be used
while the “Live View” window is displayed; the “Live View” window will close auto-
matically if the camera is disconnected.
Live View (Hand-Held)
The following window is displayed when Live View (Hand-held) is selected in the
Camera menu.
Image area
Focus point
Navigation area
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
46
Overview
Using Camera Control Pro
Appendices
Live View
2/4
The image area shows the view through the camera lens, updated in real time, with
the current focus point superimposed. The other controls in the “Live View (Hand-
held)” window are described below:
Item
Description
Start/Stop
Live View
Click to start or stop live view.
Focus Point Click the arrows to move the focus point.
To prevent damage to the its internal circuits, the camera will automatically end
Count Down live view if the temperature inside the camera becomes too high. The count-down
timer shows the time remaining until live view ends.
Start AF
Shoot
Exit
Focus the camera using normal (phase-detection) AF.
Take a picture.
Close the “Live View (Hand-held)” window.
Magnification Zoom the view in the image area in or out. The navigation area shows the portion
Ratio of the image currently displayed in the image area.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
47
Overview
Using Camera Control Pro
Appendices
Live View
3/4
Live View (Tripod)
The following window is displayed when Live View (Tripod) is selected in the
Camera menu.
Image area
Focus point for contrast-
detect AF
Navigation area
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
48
Overview
Using Camera Control Pro
Appendices
Live View
4/4
The image area shows the view through the camera lens, updated in real time, with
the focus point for contrast-detect AF superimposed. Click anywhere in the image
area to move the focus point to that spot. The other controls in the “Live View (Tri-
pod)” window are described below:
Item
Description
Start/Stop
Live View
Click to start or stop live view.
To prevent damage to the its internal circuits, the camera will automatically end
Count Down live view if the temperature inside the camera becomes too high. The count-down
timer shows the time remaining until live view ends.
Magnification Zoom the view in the image area in or out. The navigation area shows the portion
Ratio
of the image currently displayed in the image area.
Click these buttons to adjust focus by the amount selected with the Focus Step
Adjust Focus slider. Click + to move the focal point away from the camera, – to bring it toward
the camera.
Click Start AF to initiate contrast-detect autofocus. The button will change to Stop
Start/Stop AF AF; click again to end autofocus. The Adjust Focus buttons and Focus Step slider
are not available while autofocus is in progress.
Shoot
Exit
Take a picture.
Close the “Live View (Tripod)” window.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
49
Overview
Using Camera Control Pro
Appendices
The Camera Control Pro Window
1/4
The Camera Control Pro window shows current camera settings, which may be
viewed by clicking the five page selection tabs. Camera settings can be altered
using the controls in each tab as in “Cameraa CControolls.” The other settings in this
window are described below.
Connection Status
Connection status
This area shows the following information about the camera currently connected:
•
•
Camera name
Camera orientation
D40 series
D3
D2 series
D300
D200
D80
D70 series
D50
: If On or Automatic is selected for the auto image rotation option in the
camera setup menu, camera orientation will be indicated by an icon as shown
below. No icon will be displayed if Off is selected.
Horizontal
Rotated 90 ° clockwise
Rotated 90 ° counterclockwise
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
50
Overview
Using Camera Control Pro
Appendices
The Camera Control Pro Window
2/4
/
The
Button
Click this button to view or hide camera controls.
Simulated LCD Panel
This panel shows the information displayed in the camera’s viewfinder, with the ex-
ception of camera errors. Clicking on an indicator in the panel opens the Camera
Control Pro window to the tab that controls the selected option, where adjustments
can be made.
The amount of memory remaining in the camera memory buffer is displayed at the
right edge of the simulated LCD panel (this information is not displayed when a D1-
series or D100 camera is connected). This information is updated at regular intervals,
but temporary discrepancies may exist between the display and the actual amount
of memory remaining in the buffer.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
51
Overview
Using Camera Control Pro
Appendices
The Camera Control Pro Window
3/4
Shoot Buttons
Click either of these buttons to take a photograph at current settings. If a D3, D2-se-
ries, D300, D200, D80, D70-series, D50, or D40-series camera is connected, photos can
be taken in continuous shooting mode; in this case, the AF and Shoot and Shoot
buttons will instead be labeled AF and Start and Start. Continuous shooting with
D1-series and D100 cameras can only be performed with shutter-release button on
the camera body; the shooting buttons in the “Camera Control Pro” dialog can only
be used to take pictures one at a time.
AF and Shoot/ When this button is clicked, the camera will perform an autofocus operation
AF and Start
and then release the shutter to take a photograph.
Click this button to take a photograph. If the selected focus mode is AF-A (D80,
D50, and D40 series cameras) or single-servo AF, an autofocus operation will be
performed before the shutter is released.
Shoot/Start
D100
The Function Dial
The D100 can only be used to take photographs when the function dial is set to P, S, A, or M. At other
settings, the shoot buttons in the “Camera Control Pro” dialog will be disabled and the simulated
LCD panel will not be displayed.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
52
Overview
Using Camera Control Pro
Appendices
The Camera Control Pro Window
4/4
Camera Settings That Can Not Be Adjusted from Camera Control Pro
The following operations can only be performed using the controls on the camera body:
Operation
Burst photography (continuous shooting mode)
Continuous servo autofocus
Pressing the shutter-release button halfway to
check focus
Camera
D1 series
D100
All supported models
All supported models
Autofocus-only operation
All supported models
(use AF and Shoot to perform autofocus)
Manual aperture adjustment using the lens aper-
ture ring
D3
D2 series D1 series
D300 D200
Reactivating the camera after it has entered sleep
mode
D1 series
Depth-of-field preview
All supported models
D1 series
D100
Auto bracketing
Compression options for NEF (RAW) images
Operation assigned to FUNC./Fn button
D100
D3
D2 series
D300
D200
D3
D2 series
D300
D50
D200
Remote (D80, D70 series, D50, and D40 series only)
and self-timer mode selection
D80
D70 series
D40 series
Focus mode selection using camera focus-mode
selector
All supported models
D1 series
D100
D100
Metering
Exposure mode (can be adjusted if Enabble
controlls on cameerraa bbody is not selected when
D80, D70 series, D50, or D40 series is connected)
Shooting mode
D80
D70 series
D50
D40 series
D100
Shutter-speed lock
Aperture lock
D3
D3
D2 series D1 series
D2 series D1 series
Autoexposure lock
Flash compensation
All supported models
D3
D3
D2 series D1 series
D300
D200
D2 series
D2 series
D300
D200
M-up (mirror up) mode selection
Selection of second center focus area group (group
dynamic-AF)
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
53
Overview
Using Camera Control Pro
Appendices
Camera Controls
1/18
Camera controls are described below using the D3 as an example:
The Exposure 1 Tab
The following settings can be adjusted from the Exposure 1 tab:
Choose an exposure mode. If a D100 is connected, or if Ennaabbllee ccoonnttrroollss oonn tthhee
cameera body is checked when a D80, D70-series, D50, or D40-series camera is con-
nected, it will show the current exposure mode but the mode itself must be se-
lected using the camera function dial. See the camera manual for details.
Shutter speed can only be adjusted in Manual and Speed Priority modes, when it
can be set to values between the maximum and minimum values supported by the
camera. Use high shutter speeds to freeze motion, low shutter speeds to suggest
motion by blurring moving objects.
Exposure
Mode
Shutter
Speed
Aperture can only be adjusted in Manual and Aperture Priority modes, when it
can be set to values between maximum and minimum aperture (small apertures
have high f-numbers, wide apertures low f-numbers; the actual apertures available
depend on the lens used). Aperture can not be controlled from Camera Control Pro
when Custom Setting 22 has been set to allow aperture to be adjusted manually
using the lens aperture ring (D1-series only).
Aperture
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
54
Overview
Using Camera Control Pro
Appendices
Camera Controls
2/18
The Exposure 1 Tab
Exposure compensation is useful when shooting subjects contain-
ing sharp lighting contrasts, or on other occasions when you want
to modify the exposure value determined by the camera. Expo-
sure compensation is available in all exposure modes.
Exposure
Comp.
Flash Comp.
D300
D80
D200
D100
D50
This option is used to adjust the level of the camera’s built-in
Speedlight.
D70 series
D40 series
Flexible program can only be used in Program Mode, when it al-
lows you to choose from predetermined combinations of shutter
speed and aperture appropriate to current lighting conditions.
Flexible
Program
D100
The Function Dial
The D100 can only be used to take photographs when the function dial is set to P, S, A, or M. At
other settings, the controls in the Exposure 1 tab will be disabled.
Bulb
At a shutter speed of Bulb, the shutter remains open while the shutter release button is held down.
Use the camera shutter-release button to take photos at this setting. Clicking either of the shoot
buttons will display an error message.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
55
Overview
Using Camera Control Pro
Appendices
Camera Controls
3/18
The Exposure 2 Tab
The following settings can be adjusted from the Exposure 2 tab.
The focus point and focus area can be selected using the arrow buttons; see the
camera manual for details. For information on AF-area mode and focus mode, see
“The Mechanical Tab.”
Focus Point
Focus Area
The metering mode can be selected from this menu (D3, D2 series, D300, D200,
D80, D70 series, D50, and D40 series only). Metering mode defaults to the option
selected with the camera. If a D1-series or D100 camera is connected, the current
metering mode will be shown, but changes can only be made using camera con-
trols. See the camera manual for details.
Metering
Mode
Flash Sync
Mode
This option controls the camera flash sync mode. See the camera manual for de-
tails.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
56
Overview
Using Camera Control Pro
Appendices
Camera Controls
4/18
The Exposure 2 Tab
ISO sensitivity can be raised when taking photographs in low light
conditions. See the user’s manual provided with your camera for
details.
ISO Sensitivity
Auto
When this option is checked, the camera will adjust ISO sensitivity
automatically. If this option is selected when a D3 or D300 cam-
era is connected, the maximum sensitivity and minimum shutter
speed can be set by clicking the Details… button.
ISO Sensitivity Auto Control
D3
D2 series
D300
D200
D100
D80
D70 series
D50
D40 series
White balance is used to ensure that colors which appear white
when viewed directly are white in the final photograph. It can also
be used to produce an intentionally unbalanced rendering of a
scene. If Fluorescent is selected when a D3 or D300 is connected,
a menu of bulb types will be displayed. If Choose color temp. is
selected when a D3, D2-series, D300, or D200 camera is connected,
a menu of color temperatures will be displayed. See the camera
manual for details.
White Balance
Click Fine Tune… to make fine adjustments to white balance. Fine
tuning is not available with Choose color temp. (D2 series and
D200 only) or preset white balance. If a D3 or D300 is connected,
white balance can be fine-tuned on the Green-Magenta and Blue-
Amber axes as described in the camera manual; to restore default
settings, click Reset.
Fine Tune…
D3
D2 series D1 series
D200 D100
D70 series D40 series
D300
D80
D2 series/D1 series/D200/
D100/D80/D70 series/
D40 series
D3/D300
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
57
Overview
Using Camera Control Pro
Appendices
Camera Controls
5/18
The Exposure 2 Tab
This field lists the comments for
all white balance presets. Clicking
Edit… when Preset is selected
for white balance displays the
dialog shown at right, where the
comments for each of the white balance presets can be edited.
Click OK to copy the comments to the camera. Comments can
be up to thirty-six characters long and contain letters, numbers,
quotes, apostrophes, spaces, and any of the following characters:
“,” “.” “!” “?” “#” “$” “%” “&” “(” “)” “[” “]” “{” “}” “*” “+” “-” “/” “:” “;” “<” “=”
“>” “_” and “@”.
D3
D2 series
D200
Comment
D300
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
58
Overview
Using Camera Control Pro
Appendices
Camera Controls
6/18
The Storage Tab
The following settings can be adjusted from the Storage tab:
Choose from the file types supported by the camera (see the cam-
era manual for details). This setting determines pixel bit depth and
file size. If an option that includes JPEG is selected, the compres-
sion ratio can be selected from the JPEG quality menu and other
compression options (D3, D2 series, D300, and D200 only) from the
JPEG compression menu. Note that JPEG quality is fixed at
Basic when RAW (12-bit) + JPEG (8-bit) is selected with D70-
series, D50, and D40-series cameras.
Data Format
Choose from Color and Black & White. Black & White is not
available when RAW is selected for Data Format.
D1 series
Color
If Auto DX crop is selected, the camera will select DX format auto-
matically when a DX lens is attached. If this option is not selected,
the format can be selected from the menu.
D3
Image area
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
59
Overview
Using Camera Control Pro
Appendices
Camera Controls
7/18
The Storage Tab
Choose image size. See the camera manual for details.
Image Size
NEF RAW Compression
NEF (RAW) recording
Choose bit depth (D3 and D300 only) and compression set-
tings for NEF (RAW) images. These options are only available
when an option that includes NEF (RAW) is selected Data
Format.
D3
D2 series
D300
D1X
D1H
D200
Select this option to enable high-speed crop. See the camera
manual for details.
D3
D2 series
High-speed crop
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
60
Overview
Using Camera Control Pro
Appendices
Camera Controls
8/18
The Mechanical Tab
The following settings can be adjusted from the Mechanical tab:
Sets the shooting mode for D1-series cameras connected in PC mode to Single
or Continuous. Changes to this setting also apply to Custom Setting 30. The
shooting mode for D80, D70-series, D50, or D40 series cameras can be selected
from Single and Continuous. Unless Enable conntrolss on the ccameraa body is
checked in the connection status area, the shooting mode for D3, D2-series, D300,
and D200 cameras can be selected from Single, Continuous low speed, and
Release Mode Continuous high speed. If Continuous is selected for D80, D70-series, D50, or
Shooting Mode D40 series cameras or if Continuous low speed or Continuous high speed is
selected for D3, D2-series, D300, or D200 cameras, the AF and Shoot and Shoot
buttons will instead be labeled AF and Start and Start and the maximum num-
ber of shots that can be taken in a single burst can be entered in the Shots text
box (see below). If Enable controls on tthe camerra boddy is checked or a D100
camera is connected, the current shooting mode will be shown, but changes can
only be made using camera controls. See the camera manual for details.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
61
Overview
Using Camera Control Pro
Appendices
Camera Controls
9/18
The Mechanical Tab
Use the arrows to choose the maximum number of shots that can be taken
in a single burst in continuous mode, or enter a value directly in the text
box. The maximum permitted value varies with the current image-qual-
ity setting; the value chosen should not, however, exceed the capacity of
the camera memory buffer as shown at the right edge of the LCD display.
Values larger than the capacity of the camera memory buffer will be shown
in red. This setting only applies when the camera is connected, and differs
from the maximum selected in the Custom Settings menu.
Shots
D3
D2 series
D200
D300
D80
D50
D70 series
D40 series
Auto Bracketing
D3
D2 series
Select this option to perform exposure, flash, or white balance bracketing
during shooting. See “Time Lapsse Photogrraphy” for details.
D300
D80
D200
D70 series
D50
Choose the AF-area mode. If Enable controls on tthe ccaameraa bbooddyy is
checked (D3, D2 series, D300, and D200 only), the current AF-area mode will
be shown, but changes can only be made using camera controls. See the
camera manual for details.
Choose the focus mode for D80, D50, or D40-series cameras (see the camera
manual for details). The focus mode for other cameras is displayed but can
not be changed from Camera Control Pro.
AF-Area Mode
Focus Mode
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
62
Overview
Using Camera Control Pro
Appendices
Camera Controls
10/18
The Mechanical Tab
Displays the focal length and maximum aperture of the lens currently at-
tached to the camera. Depending on the lens type, some information may
not be displayed. If the lens focal length or maximum aperture have been
specified manually, an asterisk will appear next to these values. If a D3 or
D300 is connected with a non-CPU lens attached, lens data can be select-
ed.
Lens
This button is only available when a non-
CPU lens is mounted on the camera. Click-
ing Edit… displays the dialog shown at right,
where the lens focal length and maximum
aperture can be entered. Click OK to copy
Edit…
D3
D2 series
D200
D300
the values to the camera.
Displays the level of the main camera battery. Green indicates that the bat-
tery has enough charge for continued operation. Yellow indicates that bat-
tery level is low; ready a fully charged spare battery pack. Red indicates that
the battery is exhausted, and that no further photographs can be taken until
the battery pack has been replaced. You may not be able to control the
camera from Camera Control Pro when the battery is exhausted. Replace
with a fully charged spare battery pack or use an AC adapter (available sepa-
rately).
Main Battery Level
Displays the level of the camera clock battery. Should this display turn yel-
low or red, have the clock battery replaced by an authorized Nikon service
representative (a fee is charged for this service).
Clock Battery Level
D1 series
Self-Timer and Remote Modes
When a D3, D2-series, D300, D200, D100, D80, D70-series, D50, or D40-series camera is set to self-
timer mode, or when a D80, D70-series, D50, or D40-series camera is set to delayed remote or quick-
response remote mode, the Mechanical tab will show a shooting mode of Single, and any photo-
graphs taken with the Camera Control Pro shoot buttons will be taken in single-frame mode with no
shutter-release delay. To take pictures in self-timer or remote mode, use the shutter-release button
on the camera or remote control.
D3
D300
Live View
When the camera release mode dial is set to Lv, the Mechanical tab will show a shooting mode of
Single, and any photographs taken with the Camera Control Pro shoot buttons will be taken in
single-frame mode. To take pictures in live view mode, use the live view options in the Camera
menu.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
63
Overview
Using Camera Control Pro
Appendices
Camera Controls
11/18
D1 series
D100
Continuous Mode (All Models Except
)
The amount of memory remaining in the camera memory buffer is displayed at the right edge of
the simulated LCD panel. This information is updated at regular intervals, but temporary discrepan-
cies may exist between the display and the actual amount of memory remaining in the buffer.
Non-CPU Lenses
The following restrictions apply to Camera Control Pro when a non-CPU lens is mounted on the
camera (the operations listed can still be performed using the controls on the camera body; see the
camera manual for details):
D3
D2 series
D200
D300
D80
D50
D70 series
D40 series
D1 series
D100
With lens data
No data
Can not be adjust- Can only be ad-
ed. Mode select- justed if Enabble
Exposure
Mode
Can be selected from Aperture-prior- ed with camera controllss oonn tthhee
ity auto and Manual.
displayed. Photos cameera boddy is not
can only be taken checked. Otherwise
in mode M.
Shutter Speed Can only be adjusted in manual exposure mode.
Aperture
AF and Shoot Can not be used.
Shoot Can be used.
* Warning will be displayed in exposure modes other than M.
same as D100.
Shown with asterisk. Aperture shown as “f/--”. Can not be adjusted.
Can be used.*
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
64
Overview
Using Camera Control Pro
Appendices
Camera Controls
12/18
The Image Processing Tab (D3/D300)
The following settings can be adjusted from the Image Processing tab:
Choose a Picture Control (see the camera manual for details), or click
Edit… to modiiffyy tthhee sseelleecctteedd PPiiccttuurree CCoonntrol.
Picture Control
Manage Picture Control Select, renamee,, oorr ddeelleette customm Pictuurree CCoonntrols.
Color space
Choose a color space. See the camera manual for details.
Choose active D-lighting options. See the camera manual for details.
Select this option to reduce noise at slow shutter speeds. See the camera
manual for details.
Active D-lighting
Long exposure Noise
Reduction
Choose a noise reduction option for high ISO sensitivities. See the camera
manual for details.
High ISO NR
Nikon Picture Controls
Picture Controls provided by Nikon are known as “Nikon Picture Controls.” They include the Picture
Controls provided with the camera and optional Picture Controls available for download from Nikon
websites. See the camera manual for details.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
65
Overview
Using Camera Control Pro
Appendices
Camera Controls
13/18
Editing Picture Controls
Clicking Edit… in the Image Processing tab displays options for the selected Picture
Control (monochrome controls are shown at right, other controls at left).
Quick adjust
(Non-monochrome only)
Manual
Select this option and drag the slider to the left or right to re-
duce or exaggerate the effect of the selected Picture Control.
Select this option to make separate adjustments to the settings
listed below.
(Non-monochrome only)
Select the Auto checkbox to adjust sharpening automatically, or
choose a value with the slider.
Sharpening
Select this option and click Edit… to manually ediit thhee ttonee
curve for the selected Picture Control. Note that changes can
only be saved using Save as a new Custom Picture Control.
Select the radio button and adjust the sliders (saturation is not
available with monochrome controls). Select the Auto check-
boxes for automatic contrast or saturation. Contrast and bright-
ness can not be adjusted when active D-lighting is on.
Use the slider to adjust hue.
User Custom Curve
Contrast/Brightness/Saturation
Hue (Non-monochrome only)
Filter effects (monochrome only) Choose a filter effect. See the camera manual for details.
Toning (monochrome only) Choose a monochrome tint. Tint can be adjusted with the slider.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
66
Overview
Using Camera Control Pro
Appendices
Camera Controls
14/18
Editing Picture Controls
Click this button to save settings as a new custom Picture Control. The following
dialog will be displayed; name the new control and click Save.
Save as a new
Custom Picture
Control
OK
Save changes and exit.
Undo any changes to the selected Picture Control. Custom Picture Controls are
reset to the values in effect when the Picture Control was first created.
Exit without saving changes.
Reset
Cancel
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
67
Overview
Using Camera Control Pro
Appendices
Camera Controls
15/18
The “Custom Picture Control” Dialog
Clicking Manage Picture Control… in the Image Processing tab displays the dia-
log shown below.
Custom Picture Control Select a custom Picture Control.
Rename the selected custom Picture Control. The following dialog will be
displayed; rename the control and click OK.
Rename…
Delete…
Close
Delete the selected custom Picture Control.
Close the “Custom Picture Control” dialog.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
68
Overview
Using Camera Control Pro
Appendices
Camera Controls
16/18
The “Edit Camera Curves” Dialog
Clicking Edit… when User Custom Curve is selected in the Picture Control set-
tings dialog displays the dialog shown below.
The controls in the Edit Camera Curves window are similar to those used to edit tone
curves in Adobe Photoshop and other imaging software, except in the following
respects: (1) only the master channel, not individual RGB channels, may be edited; (2)
there is a limit of 20 spline points; (3) the midpoint may not be edited; and (4) a user-
defined sample image can be selected by clicking Sample Image… (the sample
image must be an NEF (RAW) image created with a supported Nikon digital camera).
Any changes to curves are reflected in the sample image. To copy the edited curve
to the Picture Control, click OK.
The upper left section of the Edit Camera Curves window contains Load… and
Save… buttons. Click Load… to load previously stored curves created with Camera
Control Pro, Nikon Capture (available separately), or Capture NX (available separately;
settings must include “Levels and Tone Curves” data). Look for files with the “.ntc”,
“.ncv”, or “.set” extension.
The Save… button opens the “Save As” dialog, where you can save the current
curve.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
69
Overview
Using Camera Control Pro
Appendices
Camera Controls
17/18
The Image Processing Tab (Other Cameras)
The following settings can be adjusted from the Image Processing tab:
Image Optimize
Choose the type of image optimization performed. See the cam-
era manual for details.
D200
D80
D70 series
D50
D40 series
Choose how much the camera sharpens outlines. See the camera
manual for details.
Adjust contrast. See the camera manual for details. Selecting
“Custom“ or “Custom 1–3 “ (D2Xs only) and clicking Edit will dis-
play “Editt Camera CCurves“ dialog.
Sharpening
Tone Comp
Choose a filter effect for black-and-white photographs. This op-
tion is only available when Black-and-white (Custom) is select-
ed for Image Optimize.
D80
Filter Effects
Color space
Choose a color space. See the camera manual for details.
D2X
D2Xs
D200
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
70
Overview
Using Camera Control Pro
Appendices
Camera Controls
18/18
The Image Processing Tab
Color Mode
D2 series
Choose a color mode. See the camera manual for details. With
the D1, colors are optimized for the NTSC color space, regardless
of the option chosen.
D1X
D100
D50
D1H
D80
D200
D70 series
D40 series
Saturation
D200
D80
D70 series
Adjust color saturation. See the camera manual for details.
D50
D40 series
Modify hue while leaving brightness and chroma unaffected.
Adjustments can be made in the range –9° to 9°, with 0° repre-
senting the original hues as recorded by the camera (in D1-series
cameras, –9° is equivalent to a camera hue setting of 0, 0° to a
setting of 3, and 9° to a setting of 6).
Hue Adjustment
D2 series
D1X
D1H
D80
D200
D100
D50
D70 series
D40 series
Long Exposure Noise Reduction
Select this option to reduce noise at slow shutter speeds. See the
camera manual for details.
D2 series
D80
D200
D100
D50
D70 series
High ISO Noise Reduction
Choose a noise reduction option for high ISO sensitivities. See the
camera manual for details.
D2X
D2Xs
D2Hs
D200
D80
Select this option to reduce noise at slow shutter speeds and high
ISO sensitivities. See the camera manual for details.
D40 series
Noise reduction
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
71
Overview
Using Camera Control Pro
Appendices
Saving and Loading Camera Control Settings
The Camera Control Pro option in the Settings menu is used to save Camera Con-
trol Pro settings and to load and apply previously saved settings.
Select this item to load camera settings previously saved using Save Control Set-
tings… (see below). A dialog will be displayed where you can navigate to the drive
Load Control (volume) and directory containing the desired settings file (only files with the exten-
Settings… sion “.ncc” will be displayed; choose settings created with the camera currently con-
nected). The settings in the Camera Control Pro window will instantly revert to the
saved settings. Bracketing settings are not affected.
Select this item to save the settings in the Camera Control Pro window to a named
file. These settings can later be recalled using Load Control Settings…. Choosing
Save Control Save Control Settings… displays a dialog where you can choose a destination and
Settings… file name for current camera settings. Camera Control Pro settings are saved with the
extension “.ncc”. Note that bracketing settings, non-CPU lens settings, and changes
to settings for the current Picture Control are not saved.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
72
Overview
Using Camera Control Pro
Appendices
The Camera Menu
1/4
The Camera menu contains the following options:
Custom Settings…
Selecting this option opens the Custom Settings dialogg, where camera Custom Settings can be
adjusted.
Set Date and Time…
Selecting this option opens the dialog shown at right, where you
can set the camera’s clock calendar to the current date and time.
To view the current time and date settings, click Use Current
Date/Time. Click Set to set the clock calendar to the time and
date shown.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
73
Overview
Using Camera Control Pro
Appendices
The Camera Menu
2/4
D3
D300
Edit Camera Curves… (all cameras except
)
This option is used to create a custom tone compensation curve and download it to the camera,
where it applies when “Custom” is selected for the camera tone compensation option.
The controls in the Edit Camera Curves window are similar to those used to edit tone curves
in Adobe Photoshop and other imaging software, except in the following respects: (1) only the
master channel, not individual RGB channels, may be edited; (2) there is a limit of 20 spline points;
(3) the midpoint may not be edited; (4) a user-defined sample image can be selected by clicking
Sample Image… (the sample image must be a RAW image created with a supported camera).
Any changes to curves are reflected in the sample image. In the case of the D2Xs, up to three
curves can be edited using the Select the Curve for Edit menu. To copy the edited curve to
the camera, click OK.
The upper left section of the Edit Camera Curves window contains Load… and Save… buttons.
Click Load… to load previously stored curves created with Camera Control Pro, Nikon Capture
(available separately), or Capture NX (available separately; settings must include “Levels and Tone
Curves” data). Look for files with the “.ntc”, “.ncv”, or “.set” extension.
The Save… button opens the “Save As” dialog, where you can save the current curve.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
74
Overview
Using Camera Control Pro
Appendices
The Camera Menu
3/4
Measure White Balance…
Use this option to measure preset white balance. If the camera
currently connected supports multiple values for preset white
balance, the setting that will be used to store the measured
value can be chosen from the pop-up menu at the top of the
dialog. Adjust camera settings as described in the section on
preset white balance in the camera user’s manual and click OK
to measure a value for white balance.
D2Xs (dialogs for other cameras may
differ)
D3
D2 series
D300
D50
D200
Dust Off Ref Photo
D80
D70 series
D40 series
Choose this option to take a reference photo for the Image Dust
Off option in Capture NX (available separately) and other Nikon
software. The dialog shown at right will be displayed. With the
camera lens ten centimeters (four inches) from a featureless
white object, frame the object so that it fills the viewfinder and
click OK to record an Image Dust Off reference photo. See the
camera manual for details.
Edit Image Comment…
Selecting this option displays the dialog shown at right, where
you can enter a comment or title for subsequent photographs.
If the camera currently connected is in the D1-series, enter a title
of thirty-eight characters or less and click OK. The title will be
used for all subsequent photographs taken while the camera is
connected. When any other camera is connected, the title is
stored in the camera as an image comment of thirty-six char-
acters or less which is appended to photographs only when the
Attach comment to images box is checked.
D2Xs (dialogs for other cameras may
differ)
D100
D80
D70 series
D50
D40 series
Choosing a Mode
The Measure White Balance… option is only available in P, S, A, and M modes.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
75
Overview
Using Camera Control Pro
Appendices
The Camera Menu
4/4
D3
D2 series
D300
D200
D100
Select Shooting Settings Bank…
Selecting this option displays the dialog shown at right, where
you can choose the shooting menu bank in which changes to
settings will be stored while the camera is controlled from Cam-
era Control Pro. See the camera manual for details.
D100
The D3, D2 series, D300, and D200 allow a descriptive comment
to be added to the name of each shooting menu bank. Clicking
Edit… displays the dialog shown at right, where the comments
for each bank can be edited. Click OK to copy the comments
to the camera. Comments can be up to twenty characters long
and contain letters, numbers, quotes, apostrophes, spaces, and
any of the following characters: “,” “.” “!” “?” “#” “$” “%” “&” “(” “)” “[”
“]” “{” “}” “*” “+” “-” “/” “:” “;” “<” “=” “>” “_” and “@”.
D3/D2 series/D300/D200
Edit Comment dialog
D3
D2 series
D300
D200
D80
D70 series
D50
Set Bracketing Mode
Selecting this option displays the BKT Mode dialog. See “Time Lappse Phottography” for details.
Time Lapse Photography…
Selecting this option opens the “Timee LLappssee PPhhoottography” diiaalloogg.
D3
D300
Live View (Hand-held)…
Selecting this option opens the “Live View (Hand-hheeldd))” dialogg.
D3
D300
Live View (Tripod)…
Selecting this option opens the “Livve Vieww ((TTrriipod)” dialogg.
D1 series
D100
Enable controls on the camera body (all cameras except
)
Check this option to enable camera controls, allowing settings to be adjusted and photographs
taken directly from the camera. If this option is not checked, only the power switch and AF-area
mode selector can be used.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
76
Overview
Using Camera Control Pro
Appendices
Custom Settings
1/4
Most of the custom settings stored in camera memory can be viewed and adjusted
from the Custom Settings window in Camera Control Pro. For more information on
Custom Settings, see the documentation provided with your camera.
Select Custom Settings… from the Camera menu. The Custom Settings
dialog for the current camera will be displayed.
1
Changes to Custom Settings
Changes made to settings in the Custom Settings dialog are stored in the camera, not on the com-
puter hard disk. This means that changing settings in the Custom Settings dialog has the same
effect as changing Custom Settings using camera controls.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
77
Overview
Using Camera Control Pro
Appendices
Custom Settings
2/4
Choose a Custom Settings bank (Custom Settings set) from the pop-up
menu at the top right corner or the Custom Settings dialog (see the camera
manual for details).
2
After making any changes to Custom Settings, click OK to save changes in
the camera Custom Settings bank and exit the Custom Settings dialog.
3
Custom Settings
Custom Settings can not be saved to a separate file. Clicking the Reset button resets all Custom
Settings to their default values.
Settings That Can Not Be Adjusted from the Custom Settings Window
The Custom Settings listed below can not be adjusted in the Custom Settings window.
• Mirror lock-up for CCD cleaning (D1-series Custom Setting 8)/Cleaning mirror up (D100 setup
menu): can only be adjusted from the camera
• RAW (NEF) image save (D1-series Custom Setting 28): if this option is set to “0” (off) when Camera
Control Pro is started, a message will be displayed. Clicking OK in this dialog sets Custom Setting
28 to “1” (uncompressed RAW image save enabled). Custom Setting 28 can only be returned to “0”
from the camera.
• ISO Auto (D100 Custom Setting 3)/ISO Boost (D1-series Custom Setting 31): can be adjusted from
the Exposure 2 tab of the Camera Control Pro window.
• PC Shooting Mode (D1-series Custom Setting 30): this option is adjusted from the Mechanical tab
of the Camera Control Pro window.
• Tone Compensation (D1-series Custom Setting 24)/Color Mode (D1X/D1H Custom Setting 32)/
Hue Adjustment (D1X/D1H Custom Setting 33)/Noise Reduction (D100 Custom Setting 4): can be
adjusted from the Processing tab of the Camera Control Pro window.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
78
Overview
Using Camera Control Pro
Appendices
Custom Settings
3/4
Custom Settings for D1-Series and D100 Cameras
Custom Settings for D1-series and D100 cameras are divided among three tabs: Page
1, Page 2, and Page 3. See the camera manual for details.
Custom Settings for D70-Series and D50 Cameras
Custom Settings for the D70 series and D50 are divided among three tabs: Basic,
Advanced 1, and Advanced 2. See the camera manual for details.
Custom Settings for D80 Cameras
Custom Settings for the D80 are divided among four tabs: Basic, Advanced 1,
Advanced 2, and Advanced 3. See the camera manual for details.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
79
Overview
Using Camera Control Pro
Appendices
Custom Settings
4/4
Custom Settings for D3, D2-Series, D300, and D200 Cameras
Custom Settings in each bank are divided into six groups. The group can be chosen
from the group menu or by clicking the Next and Prev. buttons.
Group menu
Prev./Next
buttons
A descriptive comment can be added to the name of each Custom Settings bank.
Clicking Edit… displays an “Edit Custom Settings Comment” dialog, where the com-
ments for each bank can be edited. Click OK to copy the comments to the cam-
era. Comments can be up to twenty characters long and contain letters, numbers,
quotes, apostrophes, spaces, and any of the following characters: “,” “.” “!” “?” “#” “$”
“%” “&” “(” “)” “[” “]” “{” “}” “*” “+” “-” “/” “:” “;” “<” “=” “>” “_” and “@”.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
80
Overview
Using Camera Control Pro
Appendices
Appendices
Camera Control Pro Preferences
The General Tab
82
83
84
86
The Color Management Tab
The Color Management Tab
Windows
Macintosh
Uninstalling Camera Control Pro
Windows
88
89
Macintosh
RGB Color Space Profiles
Device Registration
90
92
93
97
Windows XP
Windows 2000
Customer Support
105
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
81
Overview
Using Camera Control Pro
Appendices
Camera Control Pro Preferences
1/6
To view the Preferences (Options) dialog for Camera Control Pro, select Options…
from the Tools menu (Windows) or select Preferences… from the application menu
(Macintosh).
Windows
Macintosh
The Preferences dialog contains General and Color Management tabs.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
82
Overview
Using Camera Control Pro
Appendices
Camera Control Pro Preferences
2/6
The General Tab
The General tab contains the following items:
Choose how long the exposure meters remain on when the camera is operated on
battery power. This setting only takes effect when a D1-series camera is connected
and powered on with Camera Control Pro running, and takes precedence over the
auto meter off option chosen using camera Custom Settings. D1-series cameras
While
Camera
Control Pro powered by an AC adapter and all other supported camera models will stay awake
is running,
keep camera
awake
indefinitely, regardless of the setting chosen here.
for 15 minutes (D1-series only): The exposure meters turn off automatically if no
operations are performed for 15 minutes.
Always: The exposure meters remain on indefinitely. Note that this will increase
the drain on the battery.
Folder for
temporary
data/
Volume for
temporary
data
Specify the folder or volume in which temporary data, such as image cache data,
will be stored. The default folder for Windows is the “TEMP” folder in the Windows
directory, while the default volume for the Macintosh is the start-up disk. To choose
a different folder in the Windows version of the program, click the Browse… button
and navigate to the desired location. In the Macintosh version, a new volume can be
chosen from the pop-up menu.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
83
Overview
Using Camera Control Pro
Appendices
Camera Control Pro Preferences
3/6
The Color Management Tab (Windows)
The Color Management tab is where you specify the color management profiles
used for displaying images on your monitor and for editing and saving RGB images.
To choose a display profile, click Change Display Profile…. The Windows
Change Display “Display Properties” dialog will be displayed; open the Settings tab and click
Profile
Advanced… to open the display adapter properties dialog. To select a display
profile, open the Color Management tab and click Add.
The output color-space profile used when working with RGB images is displayed
here. Click Browse… to choose a new default RGB profile. If Use this instead
of an embedded profile when opening files is checked, this RGB color space
profile will be used for all images. If it is not checked, the profile embedded in
each image will be used.
Default RGB
color space
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
84
Overview
Using Camera Control Pro
Appendices
Camera Control Pro Preferences
4/6
Multiple Displays
In a multiple display environment, choose a single profile suited to all displays.
Default Display Profile
The default Windows display profile is “NKMonitor_win.icm.“ This profile is equivalent to sRGB.
Supported Color Profiles
See “RGB CCoollor-SSpaaccee Profifiles” for a list of the RGB color-space profiles supplied with Camera
Control Pro.
The Color Management Tab
Changes to settings in the Color Management tab also apply to ViewNX, Nikon Capture (available
separately), Nikon View, and PictureProject. They are not reflected in Capture NX (available sepa-
rately).
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
85
Overview
Using Camera Control Pro
Appendices
Camera Control Pro Preferences
5/6
The Color Management Tab (Macintosh)
The Macintosh version displays the following options.
Lists the ICC color-space profile used to display images.
ColorSync
Default
Profiles for
Documents
Default RGB color space: Choose the output color-space profile used when working
with RGB images. If Use this instead of an embedded profile when opening
files is checked, this RGB color space profile will be used for all images. If it is not
checked, the profile embedded in each image will be used.
Lists the default color-space profiles for monitors.
Device
Profiles
Change Display Profile…: If this button is displayed, you can click it to open the Dis-
plays section of the System Preferences dialog. Open the Color panel (Mac OS X) to
choose a display profile.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
86
Overview
Using Camera Control Pro
Appendices
Camera Control Pro Preferences
6/6
Input Profiles
If an input profile is selected for the default RGB color space, images will be displayed in the sRGB
color space.
Supported Color Profiles
See “RGB CCoollor-SSpaaccee Profifiles” for a list of the RGB color-space profiles supplied with Camera
Control Pro.
The Color Management Tab
Changes to the display profile apply system wide. Changes to other settings in the Color Manage-
ment tab apply to ViewNX but are not reflected in Capture NX, Nikon Capture (available separately),
Nikon View, and PictureProject.
Multiple Displays
Camera Control Pro will identify and list the profiles for all monitors in an extended desktop display,
allowing you to choose a separate profile for each monitor.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
87
Overview
Using Camera Control Pro
Appendices
Uninstalling Camera Control Pro
Windows
Use an account with administrator privileges to perform the uninstall.
Click Start and select Camera Control Pro 2 >Camera Control Pro 2
Uninstall from the program list.
1
Click Yes to begin removing Camera Control Pro and all of its components.
2
If the uninstaller encounters read-only files or components shared by anoth-
er application, a confirmation dialog will be displayed. Read the information
displayed carefully before deciding what to do with the affected compo-
nents.
3
4
Click Finish. Restart the computer if so directed.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
88
Overview
Using Camera Control Pro
Appendices
Uninstalling Camera Control Pro
Macintosh
Use an account with administrator privileges to perform the uninstall.
Open the “Applications:Nikon Software:Camera Control Pro 2” folder and
double-click the Camera Control Pro 2 Uninstaller icon.
1
2
Enter the administrator name and password and click OK.
Click Yes.
3
4
Click Quit to exit the uninstaller once Camera Control Pro has been re-
moved.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
89
Overview
Using Camera Control Pro
Appendices
RGB Color Space Profiles
1/2
Profiles with a Gamma Value of 1.8
Profile Windows
Macintosh
Description
This profile is used in desk-top publishing applications and in
Adobe Photoshop versions 4.0 or earlier, and is the typical RGB
NKApple.icm Apple RGB profile for Macintosh monitors. The corresponding RGB setting
4.0.0.3000 in Adobe Photoshop is “Apple RGB.” This profile is suitable for
working with images displayed on the Macintosh.
Nikon
Apple
RGB
The ColorMatch profile is native to Radius PressView monitors. It
Color-
Match
RGB
Nikon Color-
Match RGB
4.0.0.3000
NKCMatch.
icm
has a wider gamut than Apple RGB, with a particularly wide area
devoted to the reproduction of blues. The corresponding RGB
setting in Adobe Photoshop is “Color Match RGB.”
Profiles with a Gamma Value of 2.2
Profile Windows
Macintosh
Description
This RGB profile is used in the majority of Windows monitors. It
closely resembles the RGB commonly used in color television,
and is also used in the digital television broadcasting system that
is on its way to becoming the industry standard in the United
States of America. Software and hardware manufacturers use it
as a default color profile and guarantee operation when it used.
It is also on its way to becoming the standard for images on the
web. This profile is suited to users who plan to use their digital
images “as is,” without editing or printing them. It however suf-
fers from the drawback of a narrow gamut with a limited area
available for reproducing blues. The corresponding RGB setting
in Adobe Photoshop 5.0 and 5.5 is “sRGB,” the corresponding
setting in Adobe Photoshop 6.0 “sRGB IWC61966-2.1.”
Nikon sRGB
4.0.0.3001
sRGB NKsRGB.icm
This color profile attempts to expand on the ColorMatch RGB
gamut by defining the chromaticity for G as lying between the
values for G in the Adobe RGB and ColorMatch color-space pro-
fi le s . It was proposed by Bruce Fraser, who claims that it includes
most of the colors in the SWOP CMYK gamut. The R and B used
in the Bruce RGB and Adobe RGB color-space profiles match.
This is the color space for video defined by the National Tele-
vision Standards Committee (NTSC) in 1953 and used in early
color televisions. This color space is also used in some Far-East
newspaper and printing organizations. The corresponding RGB
setting in Adobe Photoshop is “NTSC (1953).”
Nikon
Bruce
RGB
NKBruce.icm Bruce RGB
4.0.0.3000
NTSC
(1953)
NTSC (1953)
NKNTSC.icm
4.0.0.3000
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
90
Overview
Using Camera Control Pro
Appendices
RGB Color Space Profiles
2/2
Profile Windows
Macintosh
Description
A color-space profile defined in Adobe Photoshop 5.0. It has a
wider gamut than sRGB and includes the colors found in most
CMYK gamuts, making it suitable for users involved in desktop
publishing. The corresponding RGB setting in Adobe Photo-
shop 5.0 is “SMPTE-240M,” the corresponding setting in Adobe
Photoshop 5.5 or later “Adobe RGB (1998).”
Adobe
RGB
(1998)
Nikon Adobe
RGB (1998)
4.0.0.3000
NKAdobe.
icm
A video color-space profile established by the Commission Inter-
nationale de l’Éclairage (CIE). While it boasts a fairly wide gamut,
it suffers from the drawback that the area devoted to the re-
Nikon
CIE RGB
CIE
RGB
NKCIE.icm
4.0.0.3000 production of cyan is relatively small. The corresponding RGB
setting in Adobe Photoshop is “CIE RGB.”
This color-space profile, designed by Adobe, incorporates most
of the visible colors. This however has the consequence that
most of the colors it can express can not be reproduced on
standard monitors and printers. The corresponding RGB setting
Nikon
Adobe-
Wide RGB
4.0.0.3000
Adobe
Wide NKWide.icm
RGB
in Adobe Photoshop 5.0 or later is “Adobe Wide RGB.”
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
91
Overview
Using Camera Control Pro
Appendices
Device Registration
If D1-series cameras are not recognized by the computer to which Camera Control
Pro is installed, the camera or IEEE 1394 (FireWire) board may not be correctly regis-
tered with the Windows Device Manager. To check whether a device is registered
with the Device Manager, click on the links below.
Windows XP
Windows 2000 Professional
Professional/Home Edition
Opening the Device Manager
Devices are registered with the Windows Device Manager. To open the Device Manager:
• Windows XP: Select Control Panel from the Start menu to open the “Control Panel” window, then
click Performance and Maintenance icon to open the Performance and Maintenance con-
trol panel. Click the System icon to open the System Properties window. Open the “Hardware
tab” and click Device Manager.
• Windows 2000: Right-click the My Computer icon on the desktop and select Properties from
the menu that appears. In the “System Properties” dialog, open the “Hardware” tab and click the
Device Manager button.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
92
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows XP 1/4
Registering the IEEE 1394 Interface Board
Confirm that the OHCI-compliant IEEE 1394 interface board or card has been cor-
rectly registered with the system.
Openn tthe Deviice Manaaggeerr. If the camera has been correctly registered
with the system, the controller for your camera should appear under “1394
Bus Controller.”
1
If “IEEE 1394 Bus host controllers” is not listed in the Device Manager, or if the
IEEE 1394 interface board or card is listed as an unknown or miscellaneous
device or is preceded by a red or yellow warning icon, follow the instructions
in the manual provided with the board to ensure that the drivers are properly
installed.
Install the driver for D1-series cameras from the Camera Control Pro CD, then
connect the camera to the computer using an IEEE 1394 cable and turn the
camera on. The camera will be registered automatically.
2
Logging On
Log on as the “Computer Administrator” when registering the camera.
Before Connecting the Camera
Be sure to install Camera Control Pro before connecting the camera to the computer.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
93
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows XP 2/4
Registering the Device Driver
Follow the instructions below to check that the camera has been correctly regis-
tered with the system.
Openn tthe Device Manaaggeerr and confirm that “Nikon 1394 Protocol Device”
and the camera is listed.
1
If the camera is listed under “Other devices,” reeinssttaallll tthhee ddeevviiccee ddrriivveerrss.
If “Nikon 1394 Protocol Device” is not listed in the Device Manager and the
camera does not appear under “Other devices,” disconnect the camera and
restart the computer. Reconnect the camera after the computer has restart-
ed.
Double-click the listing for the camera that appears under “Other devices.”
Click the “General” tab and confirm that “This device is working properly” ap-
pears under “Device status.”
2
Troubleshooting
If “1394 Bus host Controller” is listed in the Device Manager but the entry for the Nikon D1 (D1X/D1H)
does not appear, check the following:
• Is the camera on?
• Is the battery fully charged? If you are using an AC adapter (available separately), is it properly
connected?
• Is the mode dial set to “PC”?
• Is the IEEE 1394 cable properly connected?
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
94
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows XP 3/4
Reinstalling the Device Driver
If the camera is listed under “Other devices,” reinstall the device drivers as instructed
below.
Double-click the listing for the camera that appears under “Other devices.”
1
Open the “General” tab and click Reinstall Driver….
2
Select No, not this time and click Next.
3
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
95
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows XP 4/4
Pressing the shift key to prevent the language-selection dialog from opening
automatically, insert the Camera Control Pro CD (if the language-selection
dialog appears, click Quit). Select Install the software automatically and
click Next.
4
Click Finish.
5
6
Confirm that “This device is working properly” appears under “Device status”
in the “General” tab of the camera “Nikon Digital Camera D1 Series Proper-
ties” dialog.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
96
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows 2000 1/8
Registering the IEEE 1394 Interface Board
Confirm that your OHCI-compliant IEEE 1394 interface board or card has been cor-
rectly registered with the system.
Openn tthe Deviice Manaaggeerr. If the camera has been correctly registered
with the system, the controller for your camera should appear under “1394
Bus host Controller.”
1
If “1394 Bus host Controller” is not listed in the Device Manager, or if the IEEE
1394 interface board or card is listed as an unknown or miscellaneous device
or is preceded by a red or yellow warning icon, follow the instructions in
the manual provided with the board to ensure that the drivers are properly
installed.
Install the driver for D1-series cameras from the Camera Control Pro CD, then
connect the camera to the computer using an IEEE 1394 cable and turn the
camera on. The camera will be registered automatically.
2
Logging On
Log on as the “Administrator” when registering the camera.
Updating Drivers for the D1
If you are already using the D1 with Nikon View DX or Nikon Capture, yoouu will need too updaate thee
cameera driivveerrs.
Before Connecting the Camera
Be sure to install Camera Control Pro before connecting the camera to the computer.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
97
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows 2000 2/8
Registering the Device Driver
Follow the instructions below to check that the camera has been correctly regis-
tered with the system.
Openn tthe Device Manaaggeerr and confirm that “Nikon 1394 Protocol Device”
and the camera are listed.
1
If the camera is listed under “Other devices,” reeinssttaallll tthhee ddeevviiccee ddrriivveerrss.
If “Nikon 1394 Protocol Device” is not listed in the Device Manager and the
camera does not appear under “Other devices,” disconnect the camera and
restart the computer. Reconnect the camera after the computer has restart-
ed.
Double-click the listing for the camera that appears under “Other devices.”
Click the “General” tab and confirm that “This device is working properly” ap-
pears under “Device status.”
2
Troubleshooting
If “1394 Bus host Controller” is listed in the Device Manager but the entry for the Nikon D1 (D1X/D1H)
does not appear, check the following:
• Is the camera on?
• Is the battery fully charged? If you are using an AC adapter (available separately), is it properly
connected?
• Is the mode dial set to “PC”?
• Is the IEEE 1394 cable properly connected?
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
98
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows 2000 3/8
Reinstalling the Device Driver
If the camera is listed under “Other devices,” reinstall the device drivers as instructed
below.
Double-click the listing for the camera that appears under “Other devices.”
1
Open the “General” tab and click Reinstall Driver.
2
Click Next.
3
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
99
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows 2000 4/8
Select the search option and click Next.
4
Pressing the shift key to prevent the language-selection dialog from open-
ing, insert the Camera Control Pro CD (if the language-selection dialog ap-
pears, click Quit). Select CD-ROM drives and click Next.
5
6
Click Next.
If the message “Windows was unable to find a suitable driver for this device” is
displayed, the CD was not correctly inserted or the correct search location was
not selected. Click Back to return to the dialog shown in Step 5 and confirm that
the search location is correct.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
100
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows 2000 5/8
Click Finish.
7
Confirm that “This device is working properly" appears under "Device status”
in the “General” tab of the “Nikon Digital Camera D1 Series Properties” dia-
log.
8
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
101
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows 2000 6/8
Updating the Device Driver
If you are already using the D1 with Nikon View DX or Nikon Capture, you will need
to update the camera drivers.
Openn tthe Deviice Manaaggeerr. Expand the “Nikon 1394 Device” entry and
double-click Nikon Digital Camera D1.
1
Open the “Driver” tab and click Update Driver….
2
Click Next.
3
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
102
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows 2000 7/8
Select the search option and click Next.
4
Pressing the shift key to prevent the language-selection dialog from open-
ing, insert the Camera Control Pro CD (if the language-selection dialog ap-
pears, click Quit). Select CD-ROM drives and click Next.
5
6
Select Install one of the other drivers and click Next.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
103
Overview
Using Camera Control Pro
Appendices
Device Registration
Windows 2000 8/8
Select Nikon Digital Camera D1 Series and click Next.
7
Click Finish.
8
9
Confirm that “This device is working properly” appears under “Device status”
in the “General” tab of the “Nikon Digital Camera D1 Series Properties” dia-
log.
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
104
Overview
Using Camera Control Pro
Appendices
Customer Support
1/2
Nikon User Support Information
If you are in need of technical assistance with the installation or operation of your
Nikon product(s), please do not hesitate to contact one of the following Nikon rep-
resentatives. When calling support, you will be asked to supply the serial and/or ver-
sion number(s) of your Nikon software. For efficient communication, it is highly rec-
ommended that you have your Nikon product in front of you.
Europe and Africa
AT
IT
Austria Nikon GmbH Austrian Branch Office
Italy Nital S.p.A.
Nikon GmbH Zweigniederlassung Wien
Wagenseilgasse 5, A-1120 Wien
Tel: 09001-50066 (0,45 €/min aus dem österreichischen
Festnetz)
Via Tabacchi 33, 10132 Torino
Tel: +39-199-12-41-72 Fax: +39-011-81-44-233
LU
Luxembourg Nikon Belux
Avenue de Bourget 50 - Bourgetlaan 50
1130 Bruxelles, Brussel, Belgium
Tel: +32 (0)2-626-45-05
BE Belgium Nikon Belux
Avenue de Bourget 50 - Bourgetlaan 50
1130 Bruxelles, Brussel
NL
Netherlands Nikon Netherlands
Tel: +32 (0)2-626-45-05
Branch Office of Nikon GmbH
CH
Switzerland Nikon A.G.
New Yorkstraat 66 NL- 1175 RD Lijnden
Tel: 09001-225564 (09001-CALLNIKON)
Phone line costs (0,45 €/min)
Im Hanselmaa 10, CH-8132 Egg Zurich
Tel: 0848 277 000
CZ
Czech Republic Nikon SRO
NO
Norway Nikon Nordic AB NUF
Martin Linges vei 17, 1367 Snarøya
Tel: +47-67-82-74-00
Kodanska 46, 100 10 Praha 10
Tel: 800 900 980
DE
Germany Nikon GmbH
PL
Poland Nikon Polska Sp. z o.o.
Tiefenbroicher Weg 25, 40472 Düsseldorf
ul. Poste˛pu 14, 02-676 Warszawa
Tel: +48 (0)22 607 94 16
Tel: 0900-1225564 Phone line costs (# 0,24 €/min)
DK
Denmark Nikon Nordic AB, dansk filial
RU Russia
Nikon Europe B.V., CIS Representative Office
Zubarev pereulok, d.15, k.1, office 541, 129164 Moscow
Tel: +7 495 733 9170
Ørestads Boulevard 67, 1, DK-2300 København S
Tel: +45-32452000
ES
Spain Finicon S.A.
SE
Sweden Nikon Nordic AB
C/Ciencias, 81 Nave-8, Poligono Pedrosa
08908 L’Hospitalet de Llobregat, Barcelona
Tel: +34-(0)93-2649090 Fax: +34-(0)93-3363400
Råsundavägen 12, 8 tr, 169 67 Solna
Tel: +46-(0)8-594-109-00
FI
Finland Nikon Nordic AB Suomen toimisto
SK Slovakia Nikon SRO
Kodanska 46, 100 10 Praha 10, Czech Republic
Tel: 0800 042 053
Äyritie 8 B, 01510 Vantaa
Tel: +358 (0)20 758 9570
FR
France Nikon France S.A.S.
SL Slovenia Nikon GmbH
Zweigniederlassung Wien
Wagenseilgasse 5, A-1120 Wien
Tel: +386 (0)1 2800 812
191, Rue du Marché Rollay, 94504 Champigny
Sur Marne Cedex Tel: +33-(0)8-25-82-10-10
GB
United Kingdom Nikon U.K. Ltd.
ZA
Rep. of South Africa
380 Richmond Road, Kingston, Surrey KT2 5PR
Tel: +44 (0)871 200 1964 Phone line costs (10p/min)
Foto Distributors, Head Office
Nikon House, 516 Kyalami Boulevard,
Kyalami Business Park, Midrand 1685.
Tel: +27-(0)11-466-2500 Fax: +27-(0)11-466-3400
GR
Greece D. & J. Damkalidis S.A.
44 Zefyrou St. 17564
Tel: +30-210-9410888 Fax: +30-210-9427058
HU
Hungary Nikon Kft.
Budapest, Fóti út 56. 1047 Hungary Tel: +36-1-232-13-71
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
105
Overview
Using Camera Control Pro
Appendices
Customer Support
2/2
Asia, Oceania, Middle-East and Canada
AU
LB
Australia
Lebanon
Nikon Australia Pty Ltd.
Gulbenk Trading Co.
Hamra-Makdessi Street, Adhami Building,
5th Floor, Beirut
Unit F1, Lidcombe Business Park,
3-29 Birnie Avenue, Lidcombe NSW 2141
Tel: +61-(0)2-8748-5200 Fax: +61-(0)2-8748-5274
P. O. Box 113-6645
Tel: +961-(0)1-353742 Fax: +961-(0)1-347613
CA
Canada
Nikon Canada Inc.
1366 Aerowood Drive, Mississauga, Ontario L4W 1C1
Tel: +1-(0)905-625-9910 Fax: +1-(0)905-625-6446
MY
Malaysia
Nikon (Malaysia) Sdn. Bhd.
11th Floor, Block A Menara PKNS
No. 17, Jalan Yong Shook Lin 46050 Petaling Jaya
Selangor Darul Ehsan
China
CN
Nikon Imaging (China) Sales Co., Ltd.
Tel: +60-(0)3-7809 3688 Fax: +60-(0)3-7809 3600
Tel: 4008-20-1665 (within the Chinese mainland)
Tel: +86-(0)21-3428-4634 (from other countries and regions)
NZ
New Zealand
T.A. Macalister Ltd.
34 Vestey Drive, Mount Wellington, Auckland 1060
Tel: +64-9-573 1650 Fax: +64-9-573 1651
Nikon Square (Shanghai)
Rm.102B, Tian An Center, No. 338, West Nan Jing Road,
Shanghai 200003
Tel: +86-(0)21-6327-8001
Nikon Square (Beijing)
Philippines PH
Shop PW1-(11-12), Podium Lever of the Malls at Oriental Plaza,
No.1 East Chang An Ave., Dong Cheng District,
Beijing China 100738
Columbia Digital Sales Company
#46 Sta. Rosa St., Brgy. Manresa,
SFDM Quezon City, 1115
Tel: +86-(0)10-8515-2268
Tel: +63-(0)2-363-5315 Fax: +63-(0)2-364-3334
Hong Kong HK
Nikon Hong Kong Ltd.
Suite 1001, 10F, Cityplaza One, 1111 King’s Road,
Taikoo Shing
Tel: +852-(0)2902-9000 Fax: +852-(0)2907-0378
Singapore SG
Nikon Singapore Pte. Ltd.
80 Anson Road #10-01/02 Fuji Xerox Towers
Singapore 079907
Tel: +65-6559-3618 Fax: +65-6559-3665
India
Photo Vision
IN
Taiwan TW
Lin Trading Co., Ltd.
8F, 272 Nangking Road, Sec. 3, Taipei 10566
Tel: +886-(0)2-2740-3366 Fax: +886-(0)2-2781-2525
223, Okhla Industrial Estate Phase III,
Near Modi Flour Mill, New Delhi - 110 020
Tel: +91-(0)11-2692-8913 Fax: +91-(0)11-2692-9856
Indonesia ID
TH
Thailand
Pt Alta Nikindo
Niks (Thailand) Co., Ltd.
166 Silom Road 12, Bangkok 10500
Tel: +66-(0)2-235-2929-39 Fax: +66-(0)2-236-7240
Kompleks Mangga Dua Square
Block H 1&2 Jl.Gunung Sahariraya, Jakarta Utara 10730
Tel: +62-(0)21-6231-2700 Fax: +62-(0)21-6231-2777
Turkey TR
Teleoptik Ltd Sti
Ankara Caddesi Dedehan No. : 118-120,
Kat : 1-2, Sirkeci 34112, Istanbul
Tel: +90-(0)212-527-0789 Fax: +90-(0)212-520-6716
IL
Israel
Hadar Photo Supply Agencies Ltd.
36 - 38 Achad Haam St., Tel-Aviv
P.O. Box 1686
Tel: +972-(0)3-5603947 Fax: +972-(0)3-5603905
U. A. E. AE
Grand Stores, L.l.c
Korea KR
Nikon Imaging Korea Co., Ltd.
Saleh Bin Lahej Building, Mezzanine Floor,
Al Garhoud, Deira, Dubai
P. O. Box 2144
12th Floor, Seoul Chamber Of Commerce &
Industry Building,
4-45, Namdaemoon-Ro, Jung-Ku, Seoul 100-743
Tel: +82-(0)2-6050-1800 Fax: +82-(0)2-6050-1801
Tel: +971-(0)4-2823700 Fax: +971-(0)4-2828382
Please visit the web site appropriate for your area of purchase for downloads of updated software,
replacement manuals and technical support information:
Europe and Africa
Asia Pacific Area
Korea
Nikon Imaging Global Site
Return to first pageDownload from Www.Somanuals.com. All Manuals Search And Download.
Camera Control Pro 2
106
|
