New Holland
Windrow Inverter Specifications
WEIGHT
GROUND CLEARANCE IN TRANSPORT POSITION
Base Unit
1080 lbs (490 kg)
1147 lbs (520 kg)
1409 lbs (639 kg)
Tine Tips
Pickup
Axle
8.3” (211 mm)
12.3” (312 mm)
10.8” (274 mm)
Base unit + Hydraulics
Base unit + Hydraulics + Extension
WIDTH
WINDROW OFFSET DISTANCE
Transport position
7’ 10” (2377 mm)
9’ 1” (2997 mm)
8’ 1” (2470 mm)
14’ 6” (4420 mm)
Base unit off
Field position
left side
3’4”–6’8” (1000 mm – 2000 mm)
with Extension –
Transport position
Field position
with Extension off
right side.
11’ 0” (3353 mm)
5’ 5” (1650 mm)
LENGTH
PICKUP WIDTH
Transport position
Field position
12’ 4” (3759 mm)
11’ 11” (3632 mm)
13’ 4” (4064 mm)
12’ 11” (3937 mm)
13’ 4” (4064 mm)
12’ 11” (3937 mm)
MAXIMUM
TRANSPORT SPEED
with Hydraulics–
with Extension –
Transport position
Field position
20 mph (32 km/hr)
Transport position
Field position
OPERATING SPEED
TIRE SIZE
2-8 mph (3-13 km/hr)
5.00 x 15, 4 ply traction tread
HEIGHT
Transport position
Field position
Transport position
Field position
5’ 10” (1778 mm)
4’ 6” (1367 mm)
7’ 7” (2312 mm)
4’ 6” (1367 mm)
ATTACHMENTS AND ACCESSORIES
Cross-conveyor extension kit, Hydraulic drive kit, Hydraulic valve kit, Adaptor
manifold kit, Pickup wheel kit, Dual wheel kit, Pickup speed increase sprocket.
with Extension –
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1of 1
Download from Www.Somanuals.com. All Manuals Search And Download.
|